Technicolor Thomson CRT Television 42PB120S5 User Manual

42PB120S5-EN2 22/03/05 15:37 Page 1

Contents

Getting started

Warnings and precautions ..............................................................2

Trademarks........................................................................................2

Compliance with CE standards ......................................................2

Installation ........................................................................................3

Care and maintenance ....................................................................3

Batteries ............................................................................................3

Connections and Set-up

Unpacking and installing ..................................................................4

Front panel buttons ..........................................................................4

Hanging theTV set on the wall ......................................................4

Switching on ......................................................................................5

TV functions of the remote control................................................6

Navigating through menus ..............................................................6

Using the remote control for other equipment............................6

Programming the remote control..................................................7

Channel Set-up

Initial set-up ......................................................................................8

Sorting TV channels ..........................................................................8

Deleting TV channels ........................................................................8

Changing a channel name ................................................................8

Automatic channel search ..............................................................9

Manual channel set-up......................................................................9

General Operation

Switching theTV set on and off ....................................................10

Volume ............................................................................................10

Displaying status information........................................................10

Accessing channels..........................................................................10

Accessing AV programmes ............................................................10

Picture format ................................................................................11

List of programmes ........................................................................11

Freezing a picture ..........................................................................11

Advanced Functions

Picture settings ..............................................................................12

Picture menu functions............................................................12

Display menu functions ..........................................................12

Sound settings ................................................................................12

Picture in Picture (PIP)..................................................................13

Customizing your television ..........................................................13

Info menu ........................................................................................13

Teletext ............................................................................................14

PC mode ..........................................................................................15

Settings ..............................................................................................15

Other Information

Sockets ............................................................................................16

Connecting active speakers ..........................................................16

Connecting an amplifier ................................................................16

Connecting a video recorder ........................................................16

Troubleshooting ..............................................................................17

Technical specifications ..................................................................18

This publication is printed on recycled paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 3

Getting started

Installation

Care and maintenance

Install the TV set in a properly ventilated room.

Do not install this product on an unstable cart, stand or table.

Do not place it on a bed, sofa, rug, or other similar surfaces.

Always disconnect the TV set from the mains supply before any

cleaning operation. Clean the screen with a glass-cleaning product.

Never use abrasive products.

Clean the front and cabinet using a soft cloth impregnated with a

neutral detergent. Using solvents, abrasive or alcohol-based

products could damage the set.

Do not install the TV set in an enclosed area unless proper

ventilation is provided.

Do not rest objects on the power cord and avoid placing power

cord near high traffic areas.

Regularly dust the air vents located at the back.

Do not overload wall outlets and extension cords as this can result

in a risk of fire or electric shock.

Batteries

To reduce the risk of screen burning, do not display still images for

extended periods of time. Examples of still images include still

computer and video game images, logos, pictures, text and images

displayed in 4:3 format.

Precautions on using batteries:

- Only use the battery types specified.

- Make sure you use the correct polarity.

- Do not mix new and used batteries.

- Do not use rechargeable batteries.

When displaying tables, graphics, etc.:

- Decrease the contrast and brightness of the picture as much

as possible.

- Do not expose batteries to excessive heat, throw them on the

fire, recharge them or try to open them, as this could cause them

to leak or explode.

- Display pictures presenting many colours and grading of

colours (photographs).

- Remove the batteries from the remote control if you are not

using it for a long period of time (several weeks).

- Adjust contrast to obtain the least noticeable transition

between dark and light areas (white characters on a black

background).

If the picture displayed is in any way abnormal, turn off the set

using the main power switch located at the back and disconnect it

from the electric outlet.

THOMSON is not liable if the product is not used in

accordance with this manual.

This TV set must be installed and used in compliance with this

document. It should not be used for other purposes, including

industrial purposes.

Screen burns are not covered by the warranty.

The plasma panel is a very high technology product, giving you

finely detailed pictures. Occasionally, a few non-active pixels may

appear on the screen as a fixed point of blue, green or red.This

does not affect the performance of your product.

HELPLINE

You can contact THOMSON by dialling: 0871 712 1312

(for United Kingdom, £0.10/mn inc VAT)

www.thomson-europe.com

In our endeavour to improve the quality of our products we reserve the right to modify their features.The information in this manual is therefore likely

to change and is not contractually binding.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 4

Connections and Set-up

Unpacking and installing

Front panel buttons

Warning:This operation requires two people.

If the batteries in the remote control are run down you can use

the buttons on the TV set’s front panel, under the light, which have

the same functions as the corresponding buttons on the remote

control.They can also be used to navigate through the menus with

the following functions:

1. Place the box upright with its underside on a solid base.The

direction of the arrowheads on the long side of the box

indicates the top of the box.

2. Remove the packaging tape from the opening edge and open

the box’s flap outwards. Remove the two top polystyrene

packing corners and take the accessories box out of the

VOLUME -:

VOLUME +:

button

PR-:

PR+:

button

packing.

3. Remove the TV set from the packing and place it on a stable,

MENU: access to menus.

horizontal surface, capable of supporting the load.

Note: Before installing it, make sure that the TV set is switched off

and that the mains cable and signal cable are unplugged.

vol -

vol +

PR -

PR +

Before setting up your television set, make sure that the surface you want to put the set on can support its

weight (see the list of specifications provided with the booklet).

Don’t place the set on an unstable surface (e.g. moving shelf, very edge of a unit).

Hanging theTV set on the wall

Warning:This operation requires two people.

If you want to hang your TV set on the wall, proceed as follows:

Holes for

brackets

1. Turn the TV set over (so that the screen is facing the floor)

and place it on a flat, protected surface.

2. Unscrew the four fixing screws from the table stand and

remove the stand.

3. Attach mounting brackets (not provided) to the wall.

4. Position the TV set so that the brackets fit into the holes

provided for this purpose at the back of the appliance.

Make sure that the TV set is securely fixed and cannot fall off.

Note: Check that the wall can support the TV set’s weight and make

sure and use a type of screw that is suitable for the material which

the wall is made of. If necessary, contact a qualified fitter.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 5

Connections and Set-up

Switching on

Follow the instructions on this page on how to switch on your TV set and the remote control before going on to the following pages that

describe how to use the remote control and the channel set-up procedure.

1. Insert two LR06 or AA batteries in the remote control.

2. Connect the TV set to a mains socket.

220 - 240V ~ 50 Hz

Your TV set should only be connected to a 220 - 240V ~ 50 Hz AC supply.

It must not be connected to a DC supply. If the plug is detached from the cable, do

not, under any circumstances, connect it to a mains socket, as there is a risk of

electric shock.

Mains socket in

continental Europe

Equipment for the UK and Ireland is supplied with a mains cable fitted with a

moulded plug.

This plug contains safety components and must not be replaced by one sold by

general retailers. It is fitted with a fuse that protects your television. If your set has

stopped working, the fuse may have blown. If it has, replace it with an identical ASTA

or BSI certified (BS1362) 5-amp fuse.

3. Connect the outside aerial or cable network to the antenna connector (labelled

ANTENNA) on the rear panel of the TV set.

The aerial socket (75 Ohms -VHF / UHF / cable) can be used for connecting an

external aerial or other equipment fitted with a modulator (video recorder, satellite

receiver, etc.).

We recommend that you do not connect other equipment (video recorder, satellite

receiver, etc.) to your TV set to begin with, so as not to complicate the set-up

procedure with the additional steps involved. Connect them when you have finished

setting up the channels by referring to page 16 of this manual.

4. Turn the mains switch on the rear side of the set to position “I”.

Please respect the environment and the relevant regulations. Before you dispose of

batteries (or accumulators), ask your dealer whether they require special recycling

and if he is able to take them back.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 6

Connections and Set-up

TV functions of the remote control

Most of your television’s functions are available via the menus that appear on the screen.The remote control supplied with your set can

be used to navigate through the menus and to configure all the general settings.

Navigating through menus

Press the MENU button to display the main menu. Select a menu option using the

submenu. Return to a previous menu using the MENU or RETURN button or select

buttons, then press the

button to access the

and press

Standby.

To accessTV mode. Press this button to control the television.

Quit standby.

VCR

DVD

SAT

To accessVCR mode.

To access DVD mode.

To access SAT mode.

To access AUX mode.

To access AMP mode.

AUX

AMP

light

To provide information:

- it lights up when you press a button,

- it indicates the status when the remote control is being programmed,

- if the batteries are run down, it flashes when you press a button.

PIP

To enable the different display modes.

SWAP

To swap the main picture with the PIP picture.

To access the Mixed display function inTeletext mode.

To display current time.

FREEZE

ZOOM

To freeze the screen.

To access the Stop function inTeletext mode.

To change format/zoom.

To access the Zoom function inTeletext mode.

LIGHT

M/S

Remote control light.

(red button)To select a sound type.

(green button) List of programmes.

(yellow button) Status information.

(blue button) Inactive.

(purple button)Teletext.

The coloured buttons can also be used for operatingTeletext.

LIST

INFO

GUIDE

TEXT

To select menu options.

To set functions, change values in menus.

To access menus during initial set-up.

EXIT

To access the main menu.To go back one level in menus.

To exit the menu structure,Teletext mode and PIP mode.

+/-

To control the volume.

To switch the sound off and back on again.

RETURN

To return to the previous channel/AV programme.

To go back one level in menus.

To access the Hidden answers function inTeletext mode.

PR+/-

0-9

To change channels.

To select a channel by its number. For two-digit channel numbers, press 0 to

display “--”, then enter the channel number.

To enter numeric values.

AV PC

To select an appliance connected to an AV or PC socket.

Using the remote control for other equipment

The remote control supplied with your television can be used to control other appliances using the programmable buttons VCR, DVD,

SAT, AMP and AUX. For each button you can control the following appliances:

VCR: video recorder

DVD: DVD player

SAT: satellite receiver, cable network

AMP: hi-fi system, Home Cinema amplifier

AUX: decoder for terrestrial digital TV set and any other appliance. For instance, if you have two video recorders, you can program the

VCR button to control one video recorder, and program the AUX button to control the other one.

Note:The TV button is not programmable.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 7

Connections and Set-up

Video recorder

Press the VCR button

DVD player

Satellite receiver

Press the SAT button

On/Standby

Hi-fi system

Press the DVD button

On/Standby

Press the AMP button

On/Standby

MENU To display the main menu

Vertical scrolling in menus

To display the main menu

Vertical scrolling in menus

To display the main menu

Vertical scrolling in menus

Horizontal scrolling

in menus

Horizontal scrolling

in menus

Horizontal scrolling

in menus

OK To confirm an action

EXIT To close a menu

To confirm an action

To close a menu

To confirm an action

To close a menu

0-9 To directly access channels

To enter numeric values

or select options in menus

To directly access channels

or enter numeric values

To select a station using

its number

or enter numeric values

PR+/PR- To change channels

To change chapters

To select av input

To change channels

To change stations

AV To select av input

REV Rewind

PLAY Play

Rewind

Play

Fast forward

Stop

Pause picture

FWD Fast forward

STOP Stop

PAUSE Pause picture

REC Record

To switch the sound off and

back on again

+/-

To set the volume level

Programming the remote control

3. Point the remote control at the appliance and press the

Automatic code search

relevant button (VCR, DVD, etc). Press the

If the appliance does not go into standby mode, try another

code.

standby button.

This method can be used to automatically find the most

appropriate code for your appliance.

1. Switch on the appliance you wish to use the remote control

Depending on the year of manufacture and the type of appliance,

some functions may not be available. Certain codes may cover

more functions than others.Test the functions you can control and,

if appropriate, try other codes.

with.

2. Press the relevant button for this appliance on the remote

control, and while holding this button down, press the

standby button until the light or the appliance buttons of the

remote control come on. Release both buttons.

Note here the

code(s) which work

best.

VCR

DVD

SAT

AUX

AMP

3. Point the remote control at the appliance and press PLAY.

Wait until the light stops flashing. If the appliance has not gone

into standby mode, press the PLAY button again to continue

the search for the next set of codes. Repeat this operation

until the appliance goes into standby mode.There are around

20 sets of codes.

When you change the remote control’s batteries, remember to

reprogram it.

Programming the volume control function

4. When the appliance goes into standby mode, switch it on again

without using the remote control. Press the REV button as

many times as is required to return the appliance to standby

mode.

If you have programmed the TV remote control to use with other

appliances and these are connected to an amplifier you can also

programme the remote control to adjust the volume when you are

using one of these appliances.The example below describes the

procedure for programming a DVD player.

5. Press the STOP button and hold it down until the light or the

appliance buttons of the remote control go off.

1. Programme the AMP button on the remote control to use

with the amplifier (refer to page 6).

Note:You can cancel the programming operation at any time by

pressing the EXIT button.

2. Move the remote control away from the appliances. Press the

button and while holding it down, press the relevant

Manual programming

mode button (DVD, in this example), then the AMP button.

Release the button.

This method involves carrying out a manual search for the codes

to be used for controlling your other appliances.

3. Switch on the amplifier, then the DVD player.

1. Switch on the appliance you wish to use the remote control

4. Set the remote control to DVD, play a disc and adjust the

with.

volume using the

+/- buttons.

2. Press the relevant button for this appliance on the remote

control, and while holding this button down, enter one of the

codes relevant to your make of appliance (there is a list of

codes at the end of this manual). If the light or the appliance

buttons of the remote control flash you have entered the

wrong code or it is not possible to program the remote

control.

Repeat this operation for the other appliances.

To cancel the programmed function for any of the appliances, press

the

button, while holding it down and enter the code 000

using the numeric buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 8

Channel Set-up

Initial set-up

Initial set-up involves searching for and storing all the channels you can receive.

Make sure that the television is switched on and follow the steps in turn specified on

this page.

If you receive your channels via satellite only, you do not have to perform the automatic

channel search.

Return

United Kingdom

France

Germany

Italy

Spain

English

Français

Deutsch

Italiano

Español

Nederlands

Svenska

Norsk

Austria

Switzerland

Belgium

Netherlands

Luxembourg

Denmark

Sweden

Finland

Norway

Eire

Turkey

The first time you switch the television on, the language selection menu appears.

Suomi

Dansk

1. Switch on the TV set via the TV button on your remote control.

2. Select your language using the

buttons and confirm by pressing OK.

Select your language and press OK.

3. A list of countries appears. Select the relevant country using the

buttons.

Press OK to confirm.

Other

Note:This is the country you are in, or the country whose channels you want to receive if you

live near its borders.

Select your country and press OK.

4. The table opposite appears and the automatic channel search begins.

Notes:

- - - - -

- - - - - - - - - -

- The automatic search can take up to 10 minutes.The screen displayed will inform you of

the search’s progress.

- If you want to interrupt the search, press the red button on the remote control.The

channels already stored will be lost.

- - - - -

- The automatic search deletes all the channels stored previously.

5. The TV set arranges the channels in a preset order.

-You can change this order or delete any duplicates using the table which appears.

Note:The table disappears after a minute if there is no input from you.To display it again,

refer to the sections below.

- If you do not want to rearrange the channels, press the MENU button to close

the screen.

- If you want, later on, to sort, name or rename channels, or delete duplicates, refer

to the relevant section below.

SortingTV channels

1. ^{Display the main menu by pressing the}MENU button. Select the option

Inputs / PIP, then Main input settings and then Sort.The table opposite

appears.

SW3

ARD

ZDF

CABLE - - - - -

TF1

FR2

FR5

NBC

- - - - -

RTL2

CNN

- - - - -

- - - - - - - - - -

- - - - -

2. You can now sort the TV channels using the coloured buttons on the remote

: Select a programme.

Current = 1 - ARD

[MENU] : Stop sorting

control.

: Insert an empty programme at current position

: Swap selected programme with current position

SW3

DeletingTV channels

1. ^{Display the main menu by pressing the}MENU button. Select the option

Inputs / PIP, then Main input settings and then Delete.The table opposite

appears.

ARD

ZDF

CABLE - - - - -

TF1

FR2

FR5

NBC

- - - - -

RTL2

CNN

- - - - -

- - - - - - - - - -

- - - - -

2. You can now delete TV channels using the coloured buttons on the remote control.

: Delete current programme

: Select delete range start point

: Select delete range end point

[MENU] : Stop deleting

Current = 1 - ARD

: Confirm delete from start point to end point

Changing a channel name

If the TV set can detect the channel name from the TV signal, the detected name is

stored under the set channel number. If the channel name is not detected, the channel

number appears as “-----”.

Auto Search

Manual search

Sort

Delete

Programme:

TV Standard:

Type:

Channel Entry:

Frequency:

Name:

Auto

Option:

Decoder:

Proceed as follows to change the channel name:

PAL BG

Channel

1. Display the main menu by pressing the MENU button. Select the option

Inputs / PIP, then Main input settings, then Manual Search and finally Name.

062.25 MHz

BBC1

Normal

SCART2

2. Press the

button to select the first character.

3. Using the

buttons you can scroll through the characters set until you find the

character you want.

4. Use the

button to select the next character.

5. Repeat the previous 3 steps until you have entered the name.A maximum of 5

characters is possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 9

Channel Set-up

Automatic channel search

1. Display the main menu by pressing the MENU button. Select the option

Inputs / PIP, then Main input settings and then Auto Search.The

corresponding menu appears.

Auto Search

Manual Search

Sort

Delete

TV Standard:

Search Form:

Start Search:

Programme Start Point:

Country:

PAL BG

All Programmes

2. Select under TV Standard the valid standard for your country.You have the

following standards to choose from: SECAM L or SECAM L’ for France,

SECAM L for Luxembourg, PAL DK or SECAM DK for Eastern Europe, the

Middle East and Asia, PAL I for the UK and Ireland, PAL BG for Western Europe,

Australia and New Zealand.

United Kingdom

Note: Select the Auto setting to start the automatic channel search based on all the TV

standards.

3. Under Search Form select All Programmes to re-install all the channels or

New Programmes to search for channels not yet installed.

4. Under Programme Start Point, specify the channel number from which you

want the numbering of the channels found to start.

5. Make sure that your country is selected under the Country option. If not, select it.

6. Select Start Search and press the

button.The automatic channel search starts.

7. You can cancel the search by pressing the EXIT button.

Manual channel set-up

Follow the procedure given on this page if you find that some channels have not been

stored during the initial set-up.This can happen if you are setting up cable network

channels. Setting up channels manually requires every setting for a particular channel to

be entered, one at a time.

Auto Search

Manual search

Sort

Delete

Programme:

TV Standard:

Type:

Channel Entry:

Frequency:

Name:

PAL BG

Channel

1. Display the main menu by pressing the MENU button. Select the option

062.25 MHz

BBC1

Inputs / PIP, then Main input settings and then Manual Search.

2. Under the option Programme enter a channel number that is not yet being used.

Auto

Option:

Decoder:

Normal

SCART2

3. Select under TV Standard the valid standard for your country.You have the

following standards to choose from: SECAM L or SECAM L’ for France,

SECAM L for Luxembourg, PAL DK or SECAM DK for Eastern Europe, the

Middle East and Asia, PAL I for the UK and Ireland, PAL BG for Western Europe,

Australia and New Zealand.

4. a.

Select Channel Entry and enter the number of the reception channel of the

channel you are searching for using the numeric buttons on the remote

control, or

Select Frequency and enter directly the frequency of the TV channel you are

searching for using the numeric buttons on the remote control.

If the picture quality is not ideal, increase or reduce the frequency entered in

small increments.You do this by pressing the

starts flashing. Use the buttons to select the number to be modified,

and then the buttons to scroll through the numbers.

5. If the name of the channel does not appear under Name, select Auto and press

the button to automatically search for the channel’s name. If this information is

button.The first number

not available you need to enter it manually.

You do this by selecting Name and following the procedure described in the

section “Changing a channel name”.

6. If the channel is encoded and you want to connect a decoder to one of the AV

sockets, under Option, select the option (Decoder A or Decoder B) which

allows you to obtain decoded sound. If you do not want to use a decoder, select

Normal.

Note: If a Canal+ decoder is being used, select Decoder B.

7. Under Decoder, select the AV socket (SCART1 or SCART2) which the decoder

is connected to.

Note: If a Canal+ decoder is being used, select SCART1.

Repeat this procedure to find other channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 10

General Operation

Switching theTV set on and off

ꢀ

To switch the TV set on, set the main switch at the back to position “I”.The light

on the front panel is red.Then press the TV button, the PR+/PR- buttons or one of

the numeric buttons on the remote control.The light turns green and the TV set

comes on.

Note: It takes a few seconds for the TV set to come on.

ꢀ

To put the TV set into standby mode, press the

The light on the front panel turns red.

button on the remote control

To switch theTV set off, set the main switch at the back to position “0”.

Note:The TV set automatically goes into standby mode after three minutes if it does not

receive any signal.To switch it back on again, press the TV button, the PR+/PR- buttons or

one of the numeric buttons on the remote control.

Volume

ꢀ

Volume control:

- use the +/- buttons on the front of the TV set or press the relevant buttons

on the remote control to increase or decrease the volume; or

- select Sound from the main menu, then Volume.You can also use this menu to

adjust the switch-on volume.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Volume:

Balance:

Equalizer:

Option:

User

Stereo

ꢀ

Sound mute: Press the

off.The sound is switched on again, if you press the

buttons on the remote control.

button on the remote control.The sound is switched

Volume Line Out:

Max Startup Volume:

AVC:

User Equalizer:

button or the

+/-

Displaying status information

In TV mode, press the yellow button (INFO) on the remote control to display the

number and name of the channel you are watching, the type of sound, the zoom or

format.

When you switch on the television or change channels, the number and name of the

channel are displayed.

Note:You can disable this information from being displayed using the Display Source

Info function from the Set Up menu (see page 13).

Accessing channels

ꢀ

Using the numeric buttons:

- for channels 1 to 9, press the corresponding button;

- for channels 10 to 99, press the 0 button to display “--”, then enter the two digits.

ꢀ

Using the PR+/PR- buttons: scroll through the channels.AV programmes are not

included in the cycle unless you use the buttons on the front of the TV set.

Using the list of programmes: refer to page 11.

To access the channel or AV programme previously being watched, press the RETURN

button

Accessing AV programmes

Press the AV PC button to display the last selected audio-visual programme and scan

through the other audio-visual programmes.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 11

General Operation

Picture format

In TV mode you have the option to change the display format and zoom in and out on a

picture. Display the main menu by pressing the MENU button. Select Display, then

Zoom.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Auto Zoom:

Zoom:

Off

Userzoom

Auto Zoom: when this function is enabled, it detects the picture’s format and

automatically applies 16/9 format or Zoom 16/9 format.

User Zoom:

Color temperature:

Picture Contrast:

Freeze Picture:

Screen saver

Ideal

Under Zoom you can select one of the following formats or zooms:

4/3 format: centred picture in 4:3 format

Zoom 14/9: centred image in 14:9 letterbox format

Zoom 14/9œ: picture in 14:9 letterbox format with subtitles

Zoom 16/9: centred picture in 16:9 letterbox format

Zoom 16/9œ: picture in 16:9 letterbox format with subtitles

Cinerama: picture in widescreen 4:3 format

User Zoom: Select Userzoom under the Zoom option to display User Zoom as

an option in the menu.You can use this option to display a customised picture format

ranging from 40 to 160% of the picture’s original size, in increments of 6%. Use the

button to set the value.

16/9 format: picture in widescreen 16:9 format.

To toggle between the formats, press the ZOOM button repeatedly.

Note:To prevent screen burnout, you should try not to use for prolonged periods of time

formats which do not fill the entire screen.

List of programmes

- - - - -

- - - - - - - - - -

To display the list of channels, press the LIST (green) button on the remote control. If

you want to watch another channel, select it from the table using the

use the PR+/PR- buttons.The selected channel is shown.

buttons or

Press MENU or EXIT to close the menu.

- - - - -

Freezing a picture

To freeze the screen, you can:

- press the FREEZE button on the remote control, or

- display the main menu by pressing the MENU button, select Display, then Freeze

Picture.

Press the FREEZE button again to cancel.

Note:To prevent screen burnout, this function is automatically disabled after a minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 12

Advanced Functions

Picture settings

You can use the picture setting menus to achieve the best picture settings, according to

your taste and the ambient lighting.

Picture menu functions

Display the main menu by pressing the MENU button, then select the Picture option.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Contrast:

Brightness:

Sharpness:

Color:

Contrast, Brightness, Sharpness, Color: adjust these according as required using

the

buttons.

DNC (Dynamic Noise Control): this improves picture quality when reception is

difficult.

DNC:

Photo CD:

Film Mode:

Off

Auto

Photo CD: this can be used to automatically provide the optimum quality for still

pictures (photographs on a photo CD, for instance). It is disabled by default. Select the

option On to enable it.

Film Mode (AV sources only): this function detects that the programme being

broadcast is a film and enhances picture quality. It is disabled by default. Select the

option Auto to enable it.

Display menu functions

Display the main menu by pressing the MENU button, then select the Display option.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Color temperature: you can select one of the three default settings (Warm, Ideal,

Cold) or create a customised setting.You do this by selecting USER under Color

Auto Zoom:

Zoom:

Off

Userzoom

User Zoom:

Color temperature:

Picture Contrast:

Freeze Picture:

Screen saver

temperature, then select User ColorTemp. and press the

button to apply the

Ideal

setting.

Note:When you increase the proportion of red the picture seems “warmer”.When you

increase the proportion of blue the picture seems “colder”.

Picture Contrast: you can adjust this as required using the

buttons.

Freeze Picture: press the button to freeze the screen. If the PIP option is enabled

BOTH the main picture and PIP are frozen.

Note:You can also use the FREEZE button.

Screen saver: press the

button, then select an option and press the

button to

enable it:

- White: this can be used to eliminate any recent, slight occurrences of screen burnout.

- Inverted: this can be used to restore the screen in the event of major burnout.

Press the MENU button to cancel this.

Sound settings

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Display the main menu by pressing the MENU button, then select the Sound option.

Volume, Balance, Volume Line Out, Max. StartupVolume: adjust these according

as required using the

Volume:

Balance:

buttons.

Equalizer:

Option:

Volume Line Out:

Max Startup Volume:

AVC:

User

Stereo

Equalizer: select one of the preset options or the User option to define your own

settings. In this case, the User Equalizer option appears. Select it and press the

button to display the five frequency bands.Adjust these according as required using the

buttons.

User Equalizer:

Option: using the

button, select a sound type.

Note:You can also use the red (M/S) button.

AVC: select On if you want to keep the same sound level for all channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 13

Advanced Functions

Picture in picture (PIP)

The PIP function offers the possibility of viewing two image signals at the same time.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Main input:

Main input settings

PIP Mode:

Secondary input:

PIP Size:

PIP Horiz.Pos.:

PIP Vert.Pos.:

Quick swap

TUNER

PIP

SCART1

Display the main menu by pressing the MENU button, and then select the Inputs / PIP

option.

Under Main input, select the input for the main picture.This can be a television

channel (TUNER option) or a device attached to your TV set.

Under PIP Mode, select the PIP display mode:

- Main: PIP function disabled

- PIP: the PIP programme appears in a frame in a corner of the screen

- Split screen: the screen is split in two vertically and the PIP programme appears on

the right.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Main input:

Main input settings

PIP Mode:

Secondary input:

Quick swap

TUNER

Split Screen

SCART1

As soon as you select the PIP option, the related options appear.

Secondary input: select the source of the PIP.

Note: If no signal is received at this input, the frame remains dark.

PIP Size: set the frame size.

PIP Horiz.Pos., PIPVert.Pos.: set the horizontal and vertical frame position.

Note:Any change in size and position becomes visible immediately.

Quick swap: press the

button to toggle between the main picture and PIP picture.

Note:You can also press the SWAP button to toggle between main picture and PIP picture.

Use the PIP button on the remote control to enable the different display modes in

turn.

Customising your television

You can set preferences for some features.These preferences remain in force as long as

you do not change them.

Inputs / PIP

Picture

Display

Sound

Set Up

Info

Display the main menu by pressing the MENU button, and then select the Set Up

option.

Display Source Info:

Language:

OSD Set Up:

Pwr Down/Stand-By

Reset to factory defaults

Sleep Timer:

English

Display Source Info: select Off to disable the option for displaying status information

when you press the yellow (INFO) button, switch the TV set on or change channel (see

page 10).This function is enabled by default.

Off

Language: use the

buttons to select from the list the language you want the

menus to be displayed in.

OSD Set Up: this provides access to the following functions:

- Time Out: this can be used to set how long the menus are displayed for

Options: Off, 5s, 10s and 15s.

- Transparency: this can be used to display the menus against an opaque or

transparent background. Options: Off and On.

Pwr Down/Stand-By: this function applies to PC mode only.When it is enabled, the

device automatically goes into standby mode if no signal is received and restarts when a

signal is received again. Press the

button to access the option Reaction on PC

syncs, which is enabled by default.

Reset to factory defaults: to restore all the settings to the original default settings.

Press the button to access the option Yes, delete my settings. Press the

button again to confirm.

Sleep timer: you can set the TV set so that it automatically goes into stand-by mode

after a certain amount of time. Select one of the preset times (30 minutes, 60

minutes or 90 minutes). Set the time to Off to disable the function.

Info Menu

Display the main menu by pressing the MENU button, then select Info.The screen

appears, indicating the TV set’s internal temperature and providing technical information

about your appliance.The content of this screen cannot be changed.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 14

Advanced Functions

Teletext

The Teletext service is available in many countries under a variety of names (TOP Text,

Fastext, FLOF text,Videotext). It is provided as a free service by television broadcasters.

This service provides a real wealth of information, available at any time, on weather,

sports results, news, games, etc.The information is presented in pages or organised in

topics specified in colour on the screen and you can access this information by simply

pressing the buttons of the relevant colour on the remote control.

1. Select a television channel with Teletext.

2. Press the TEXT button on the remote control to display Teletext.To display a page,

enter its 3-digit number.

Note:The red, green, yellow and blue buttons on the remote control have different functions

depending on the type of Teletext.They are displayed at the bottom of the Teletext screen.

If the current page includes subpages, the page number is displayed in green. In this

mode, pressing the

subpages.

buttons will allow you to step through all the available

Stop

Some information is spread over several subpages which will be displayed one after the

other.To stop subpage scrolling, press the FREEZE button. Press FREEZE to allow the

information to move again.

Hidden answers

To reveal a hidden answer (for example, in games), press RETURN. Press RETURN

once more to hide the answer again.

Zoom

Press ZOOM once to zoom in on the top part of the screen, twice to zoom in on the

bottom part of the screen and three times to return to normal display.

Mixed display

Press the SWAP button to display Teletext against a transparent background. Press the

TEXT button to display Teletext in the right half of the screen.

Press the EXIT button to close Teletext.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 15

Advanced Functions

PC Mode

1. Switch off the TV set and PC.

2. Connect the PC to the TV set using a video cable (DVI socket on the TV set and a

VGA or DVI socket on the PC).

3. Switch the TV set and PC on again. Display the main menu by pressing the MENU

button, then select Inputs / PIP, then Main input. Select the appropriate signal

source: PC (RGB) (for analogue signals) or PC (DVI) (for digital signals).You can

also press the AV button as many times as required to select the desired input.

Settings

Display the main menu by pressing the MENU button, select Inputs / PIP, then Main

input settings.The first four options in the Main input settings menu are for

information purposes only.

Auto Setup

Main input:

Main input settings

PIP Mode:

PC (RGB)

Off

When an analogue video format (RGB) is used for the first time, the TV set carries out

an automatic setup: the picture moves back and forth slightly, looking for the best

position and picture.

60.0 kHz

75.0 Hz

78.75 MHz

+/-

H Freq.:

V Freq.:

Pixel Clk:

H / V Pol:

User timings

Auto Setup

V Pos:

Note: Some computer formats require the picture’s position (horizontal/vertical) and size to

be set manually.The result from auto setup depends a great deal on the picture displayed.

V Size:

H Size:

H Pos:

To carry out an automatic setup manually, display the main menu by pressing the MENU

button, select Inputs / PIP, Main input settings, then Auto Setup.

Phase:

Setting user formats

60.0 kHz

75.0 Hz

78.75 MHz

H Freq.:

V Freq.:

Pixel Clk:

H / V Pol:

User timings

Auto Setup

V Pos:

V Size:

H Size:

H Pos:

You can store frequently used formats as user formats.The TV set will detect them and

display them immediately in the correct manner, without running the Auto setup

function.

+/-

Position:

Recall

Save

Delete all

1. Display the main menu by pressing the MENU button, select Inputs / PIP, Main

input settings, then User timings.

2. You can then, for instance, save the format currently being used in position 1 (8

positions are possible) by selecting Save.

Phase:

The Recall option allows you to select a user format that has been saved and with

Delete all you can delete all stored user formats.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 16

Other Information

Sockets

SCART 1 and SCART 2 sockets (input-output)

SCART 2

These can be used to connect a video recorder, camcorder, decoder, satellite receiver,

DVD player or video game console.

The SCART 1 socket can also be used for connecting an appliance supplying an RGB

signal (DVD player, video recorder, etc.).

Note: If you connect the decoder to the TV set using a SCART cable, select Inputs / PIP

from the main menu. Under Main input, select the AV socket (SCART1 or SCART2)

which the decoder is connected to. Select Main input settings. Under TV SCART,

select Not used.

SCART 1

CVBS/YUV

Video component (YUV) and LINE IN CVBS/YUV L/R

audio sockets (input)

To connect a DVD player or another video source equipped with aYUV output.

CVBS

S-VIDEO and LINE IN S-VIDEO L/R audio sockets

(input)

S-VIDEO

These can be mainly used to connect camcorders (S-VHS or Hi 8 format).

S-VIDEO

PC DVI-I

PC DVI-1 video and LINE IN PC audio sockets (input)

They can be used to connect a PC with a compatible video card, certain DVD players

or a high-definition compatible digital satellite decoder.The formats supported are 480i,

480p, 576p, 720p and 1080i.

Notes:

- On older PC graphic cards it is possible that pin 9 is barred. Should this be the case, please

contact the service hotline.

- The DVI socket is compatible with HDCP format.

Connecting active speakers

The audio LINE OUT sockets at the back of the television can be used to connect

active speakers (with a built-in amplifier) replacing the television’s built-in speakers.

LINE

OUT

Left and right speakers: connect the left speaker to the LINE OUT L socket and the

right speaker to the LINE OUT R socket.

Subwoofer: connect the subwoofer to the LINE OUT SUB socket.

LINE

OUT

SUB

Connecting an amplifier

You can connect an amplifier and two speakers to replace your television’s side

speakers.

Connect your television’s left L and right R LINE OUT sockets to the amplifier’s L and

R inputs.

Connecting a video recorder

To obtain optimum picture quality, use a SCART cable. However, you can also connect a

video recorder to the television using the aerial socket.

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 17

Other Information

Troubleshooting

The table below provides a list of the possible problems that can occur and the solutions. Please refer to this table before contacting the

after-sales department.

If you are unable to resolve the problem using the instructions provided below, set the main switch to “0” and unplug the power cable

from the mains socket.Then contact the after-sales department.

Never attempt to remove the TV set’s cover or repair it yourself.

FAULT

POSSIBLE CAUSE

POSSIBLE SOLUTION

No picture and no sound, although the mains

plug is inserted and the unit is switched on.

ꢀ Mains switch in position “0” (OFF). ꢀ Set mains switch to position “I”.

ꢀ Display’s mains plug is not inserted in the ꢀ Insert the mains cable plug into the

socket.

ꢀ Defective mains cable.

ꢀ Call the service hotline.

Screen is dark.

ꢀ Contrast setting too low.

ꢀ Adjust the brightness and/or contrast

correctly (see Picture menu).

Blue screen.

ꢀ No input signal, wrong input selected. ꢀ Check the cable and connection;

assign correct input to source.

Weak or excessive colours.

ꢀ Colour not set correctly.

ꢀ Adjust the colour in the Picture menu.

ꢀ Connection cable not correctly inserted. ꢀ Connect the cable correctly.

The picture is cut off or off centre.

The picture is too large or too small.

The remote control is not working.

ꢀ Picture position not set correctly.

ꢀ Picture format set wrongly.

ꢀ The batteries are flat.

ꢀ Correct the picture position. Use the

auto setup function (PC mode).

ꢀ Press ZOOM button repeatedly until the

picture is displayed as full screen.

ꢀ Insert new batteries.

ꢀ There is an obstruction between the ꢀ Remove the obstruction between the

remote control and the sensor. remote control and the sensor.

ꢀ The remote control is located outside of ꢀ Use the remote control within the

its operating range. specified range.

The displayed picture is too dark.

ꢀ The picture quality is not set correctly. ꢀ Adjust the picture brightness and

contrast using the Picture menu.

The picture is displayed, but there is no

sound.

ꢀ The sound is muted.

ꢀ Press the

button on the remote

control.

ꢀ Volume set to minimum.

ꢀ Increase the volume.

Certain letters do not display correctly (PC

mode).

ꢀ Set the phase position via the option

Main input settings in the Inputs /

PIP menu.

ꢀ Check the picture width setting.

ꢀ Run an Auto Setup.

Horizontal stripes with TV or video signals.

Some pixels are not active.

ꢀ Signal source has been set up before the ꢀ Always place the signal sources at the

TV set. side of or behind the TV set.

ꢀ Video cable screening is inadequate. ꢀ Use only a high-grade signal cable with a

high screening attenuation.

ꢀ Plasma screens are based on state-of-

the-art technology. It is possible that

some inactive pixels occasionally appear

on screen in the form of tiny blue, green

or red fixed dots.This is not an operating

fault.

Notes:

- To restore all settings to their original status, select the option Reset to factory defaults in the Set Up menu.

- If the TV set is operated without sufficient ventilation, the internal temperature can rise excessively. If the ambient or internal temperature rises above

a certain value, first of all, the warning window on the left-hand side of the screen will appear.As a result, the TV set may automatically switch to

standby mode. Make sure sufficient ventilation is provided!

Download from Www.Somanuals.com. All Manuals Search And Download.

42PB120S5-EN2 22/03/05 15:37 Page 18

Other Information

Technical specifications

DISPLAY

Size / diagonal

106 cm, 16:9 format

920 mm (horizontal) x 518 mm (vertical)

852 x 480 pixels

Displayable picture size

Resolution

Colour display

16.7 million colours

160° typical

Viewing angle

Contrast ratio

3000:1 typical

VIDEO STANDARDS

Video

PAL / SECAM / NTSC

TV tuner

PAL (BG, I, DK, L) / SECAM (L/L’), 47 - 861 MHz (VHF, UHF, Hyperband)

Automatic format detection (full screen)

PALplus, Cinescope

Formats

4:3, 16:9, Cinerama, full screen, user zoom (40%-160%)

PC FREQUENCY RANGE

Horizontal frequency

Vertical frequency

Clock frequency

Resolutions

30 - 80 kHz

50 - 90 Hz

max. 140 MHz

DOS: 640 x 480 - 60 Hz, 720 x 400 - 70 Hz,

VGA: 640 x 480, SVGA: 800 x 600;WVGA: 848 x 480 50 Hz - 90 Hz

XGA: 1024 x 768 50 Hz - 90 Hz

WXGA: 1280 x 768 - 60 Hz

SXGA: 1280 x 1024 50 Hz - 75 Hz

Recommended resolution

Formats

848 x 480 - 60 Hz

1:1, full screen, full format, zoom, user zoom (40%-160%)

INPUTS / CONNECTIONS / SYNCHRONISATION

PC /Video input port

Video connections

RGB analogue and automatic sync detection

TV tuner: IEC, 75 ohms input resistance

SCART1: RGB, CVBS input, CVBS output

SCART2: CVBS input, CVBS output

SCART1 / SCART2: audio input/output

CVBS: RCA

Y/C: MiniDIN (HOSIDEN)

YUV (CVBS): 3 x RCA

DVI-I

PC analogue/digital connection

Audio sockets

DVI-I

Built-in loudspeakers: 2 x 2 broadband - 2 x 7 W sinusoidal

OUT LINE SUB: 1 x active subwoofer

Stereo input: 3 x RCA L/R 1Vrms (YUV (CVBS),YC, PC), 2 x SCART 1Vrms

Stereo output: 1 x RCA (LINE OUT)

Synchronisation

Sync on green, composite sync with automatic detection, Separate H andV sync

OPERATING CONDITIONS

Temperature

+5 °C - +35 °C (in operation), -20 °C - +60 °C (storage)

20 % - 85 % (non-condensing) - 40 °C

max. 2,000 m

Air humidity

Elevation

DATA MAINS CONNECTION

Voltage supply

240V AC 10 %

Mains frequency

50 / 60 Hz 6 %

Power consumption

DIMENSIONS AND WEIGHT

TV set with stand H x W x D

Weight (total)

250 W (EN61000-3-2), 6 W in standby mode

694 mm x 1150 mm x 200 mm ( 2 mm)

35.6 kg 10%

Weight (without stand)

34 kg 10%

Download from Www.Somanuals.com. All Manuals Search And Download.

Targus Mouse Wireless Laser Mouse User Manual
Thermador Ventilation Hood PH30CS User Manual
Thule Automobile Accessories C29 User Manual
TOA Electronics Music Mixer M 243 User Manual
Toshiba Flat Panel Television 65L9300U User Manual
Uniden Scanner BC340CRS User Manual
Univex Stereo Amplifier 160ss User Manual
Vidikron Stereo Receiver VDP 80 User Manual
Vivitar Flash Memory VIV DF 186 User Manual
Vox DJ Equipment AC15H1TV User Manual