|
PF-16
PCMCIA 10/100 Mbps
Ethernet Card
User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • Preface
Table of contents
Regulatory compliance.........................................................................ii
Table of contents .................................................................................iii
About this manual................................................................................iv
CHAPTER 1
Introduction
1
1
Features ............................................................................................................1
CHAPTER 2
2
Hardware installation
2
What’s in the package.......................................................................................2
Hardware description........................................................................................2
Inserting the Ethernet Card...............................................................................3
Ethernet Card RJ-45 connector LEDs ..............................................................5
Disconnecting the Ethernet Card......................................................................5
CHAPTER 3
Driver installation for Win 95/98/NT
7
7
Driver installation for Windows 95 ..................................................................7
Driver installation for Windows 98 ..................................................................9
Driver installation for Windows NT 4.0.........................................................11
CHAPTER 4
Driver installation for DOS environments
14
14
System Requirements .....................................................................................14
Driver installation ..............................................................................14
Driver installation program.............................................................................14
Quick installation............................................................................................15
The Install program............................................................................16
Using the Install program ...............................................................................16
Auto configuration..........................................................................................18
Custom configuration .....................................................................................19
Manual installation ............................................................................21
Enablers..........................................................................................................21
Driver installation ..............................................................................24
Microsoft Windows NT 3.51..........................................................................24
Microsoft Windows for Workgroups 3.11......................................................25
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Netware 3.X/4.X client...................................................................................26
Microsoft LAN Manager ................................................................................26
Artisoft LANtastic version 6.0........................................................................27
CHAPTER 5
Installation for Linux
28
28
System Requirements .....................................................................................28
Installing the driver for Linux.........................................................................29
APPENDIX A
Troubleshooting
31
31
Q&A for Windows environments........................................................31
Windows 95/98...............................................................................................31
Windows NT 4.0 and 3.51..............................................................................32
APPENDIX B
Enabler program error messages
33
33
CARDGO.EXE...............................................................................................33
APPENDIX C 35
Specifications .....................................................................................35
About this manual
This user’s manual describes how to install and operate your PCMCIA
10/100 Mbps Ethernet Card. Please read this manual before you install
the product.
This manual includes the following topics:
!
!
!
!
Product description, features and specifications.
Hardware installation procedure.
Software installation procedure.
Trouble shooting procedures
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Introduction
Thank you for purchasing the PCMCIA 10/100 Mbps Ethernet
Card.
This high-speed Ethernet network adapter card complies with the
PCMCIA Type II standard and uses a female RJ-45 adapter to
connect to the network.
The Ethernet Card is switchless and software configurable. An
enabler program is used to set up the card for your operating sys-
tem; even without the card and socket service drivers for the
PCMCIA controller installed, you will still be able to use the card
by running the enabler program.
Features
•
•
Type II credit-card size (5.0 mm)
Complies with IEEE 802.3u 100Base-TX and 802.3
10Base-T protocols.
•
•
Supports all popular operating systems
Supports Nway auto-negotiation for 10/100 Mbps full/half-
duplex
•
•
•
•
•
Complies with PCMCIA Release 2.1 specifications and later
Supports hot swap card insertion and removal
PC Card standard 68-pin 16-bit PCMCIA interface
5V power consumption
FCC/VCCI/CE certified
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Hardware installation
This chapter covers inserting your Ethernet Card in the notebook’s
PCMCIA port, and connecting the card to a network.
What’s in the package
Please ensure that the following items are included in your pack-
age. If any items are missing, contact your dealer.
•
•
•
•
PCMCIA 10/100 Mbps Ethernet Card
RJ-45 adapter
Software and device driver disk
This user’s manual
Hardware description
The Ethernet Card is encased in a stainless compact frame and has
a 68-pin connector for attaching to the notebook’s PCMCIA port,
and a 15-pin flat connector for connecting to the Ethernet adapter.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Hardware installation
Inserting the Ethernet Card
These instructions apply to most notebook computers.
For detailed information on inserting PC cards into
your notebook, consult the notebook user’s manual.
Follow the procedure below to install the Ethernet Card.
1. With the card’s 68-pin connector facing the notebook’s
PCMCIA slots, slide the card all the way into an empty slot.
Do not force the connection!
Figure 2-1: Inserting the Ethernet Card
2. Plug the RJ-45 adapter into the Ethernet Card’s 15-pin
connector.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
10/100M b ps Ethernet
Figure 2-2: Connecting the RJ-45 adapter
3. Connect the RJ-45 adapter to the network.
You can connect the Ethernet adapter cable to a port on a
hub or to a RJ-45 phone jack with another male-to-male
RJ-45 line or connector.
1
0
0
B
A
S
E
-
T
P
o
r
t
s
Connecting to a phone jack
Figure 2-3: Connecting to the network
Connecting to a hub
After you have inserted the Ethernet Card, you must install the
drivers. If your operating system is Windows 98, Window 95, or
Windows NT, refer to Chapter 3. If your operating system is
Windows NT 3.51 or another DOS environment network operat-
ing system, refer to Chapter 4. If your operating system is Linux,
refer to Chapter 5.
4
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Hardware installation
Ethernet Card RJ-45 connector LEDs
The following illustration shows the Ethernet Card RJ-45 con-
nector LEDs:
Fast
Ethernet
1
0
0
M
LNK
ACT
LNK
AC T
100M
Figure 2-4: RJ-45 connector LEDs
The following table describes the meaning of the LEDs:
LED
MEANING
Indicates transmit or receive activity. It is normally off.
When there is packet transmit or receive activity, this LED
is on.
ACT
Indicates the connection speed. When off, the connection
speed is 10 Mbps. When on, the connection speed is 100
Mbps.
100M
LNK
Indicates whether the link is active or not. When lit, indi-
cates that the link is active. When off, indicates that the link
is inactive.
Disconnecting the Ethernet Card
The Ethernet Card RJ-45 connector is designed to lock in place
when connected to the Ethernet Card. The following illustration
shows the location of the clips:
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
10/100Mb ps Ethe rnet
Figure 2-5: Disconnecting the RJ-45 cable
Do not pull on the RJ-45 cable to disconnect the RJ-45 con-
nector from the card. You may damage the RJ-45 connector
pins as well as the Ethernet Card.
Warning!
After you have disconnected the RJ-45 cable, you can eject the
Ethernet Card from the notebook’s PC Card slot.
In Win 95/98 operating systems, you do not have to
power down the notebook to remove the card. The card
is hot-swappable—you can remove the card when the
notebook is powered on. However, Microsoft recom-
mends that you stop the card. Refer to your Win 95/98
online help for information on stopping the Ethernet Card.
Most notebooks have an eject lever or button for ejecting PC cards
from the PC ports. Consult your notebook’s user’s manual for
details.
Do not eject the Ethernet Card when a data transmission is
taking place. Exit your communications program normally,
stop the card if necessary, and then remove the card.
Warning!
6
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Driver installation for Win 95/98/NT
The following sections cover PCMCIA 10/100 Mbps Ethernet
Card driver installation in the Windows 95, Windows 98, and
Windows NT operating systems.
Driver installation for Windows 95
Installation of the Ethernet Card is just the same as for any normal
Windows 95 Plug & Play device. Follow the steps below to in-
stall the driver in Windows 95.
1. Insert the Ethernet Card into an available PCMCIA slot in
your notebook (refer to page 3 “Inserting the Ethernet
Card”).
2. After Windows 95 detects the card, the Update Device
Driver Wizard window appears:
7
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
3. Insert the driver disk and click Next to continue the instal-
lation. Windows searches for the driver and the following
screen appears:
4. Click Finish. Windows 95 copies driver files to the hard
disk.
Windows 95 may need to copy re-
quired system files and will prompt you
to input the path to the files. Follow the
instructions on your screen, then click
OK to continue.
5. After all files have been copied, Windows 95 prompts you
to restart the system. Click Yes to complete the installation.
8
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for Win 95/98/NT
Driver installation for Windows 98
Follow the steps below to install the Ethernet Card drivers for
Windows 98.
1. Insert the Ethernet Card into an available PCMCIA slot on
your notebook (refer to page 3 “Inserting the Ethernet
Card”).
2. After Windows 98 detects the Ethernet Card, the Add New
Hardware Wizard window appears:
3. Click Next to continue the installation. A screen appears
prompting you to select an installation method:
4. Select Search for the best driver for your device and
click Next. The following screen appears:
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
9
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
5. Ensure that the Microsoft Windows Update box is un-
checked, and ensure that the Floppy disk drives box is
checked.
6. Insert the driver disk into your floppy disk drive and click
Next. The following screen appears:
7. Click Next. After Windows 98 copies files to your hard
disk drive, you are prompted to restart the system.
Windows 98 may need to copy re-
quired system files and will prompt you
to input the path to the files. Follow the
instructions on your screen, then click
OK to continue.
8. Click Yes to complete installation.
10
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for Win 95/98/NT
Driver installation for Windows NT 4.0
This installation procedure assumes that you have installed the
network component on your computer.
To check whether the network component has been installed, dou-
ble click the Network icon in the Control Panel. If it has not
been installed, refer to the Windows NT 4.0 installation guide for
instructions on installing the component.
While installing the network component, Windows NT 4.0 will
prompt you to install the network adapter driver. Follow the steps
below to install the driver.
1. Insert the Ethernet Card into an available PCMCIA slot on
your notebook (refer to page 3 “Inserting the Ethernet
Card”).
2. Log in to NT 4.0 as “Administrator”.
3. Double click the Network icon in the Control Panel, and
select the Adapters tab as shown in the following screen:
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
4. Click Add to add a new adapter. The following screen ap-
pears:
5. Click Have Disk. The following screen appears:
6. Type “A:\WINNT40” where “A” is your floppy drive letter.
Insert the driver disk, and click OK.
After finding the installation file, the Select OEM Option
window is displayed.
7. Click OK. The following screen appears, prompting you
to input the IRQ, I/O port address, and connection type:
12
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for Win 95/98/NT
8. Select the desired IRQ Level, I/O Port Address and Con-
nection Type.
You must select an IRQ and I/O port
address that is not being used by ano-
ther device; otherwise, you will have a
system conflict error.
To see the available IRQ and I/O port
addresses, use the Windows NT Diag-
nostics program in Windows NT
Administrator tools. Refer to the Win-
dows NT online help for information on
Windows NT diagnostics.
9. Click OK to continue. Windows will configure the Ether-
net Card. You are returned to the Network window.
10. Click Close to exit the Network window. Windows NT
4.0 will bind the adapter with the network component.
When Windows NT is finished binding the adapter to the
network component, you are prompted to restart the system.
11. Click Yes to finish the installation.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Driver installation for DOS environments
This section covers PCMCIA 10/100 Mbps Ethernet Card driver
installation for DOS environment operating systems.
System Requirements
Notebook equipped with Type II PC Card
slot and PC Card controller (compliant Rev.
2.1 or higher
Hardware Requirements
The Card & Socket service drivers should
comply with PCMCIA Release 2.1 or higher
Software Requirements
Driver installation
You must install the PCMCIA 10/100 Mbps Ethernet Card drivers
before your computer system can recognize your Ethernet Card.
The following sections cover client driver installation.
Driver installation program
INSTALL is the PCMCIA 10/100 Mbps Ethernet Card driver in-
stallation program. The INSTALL program automatically selects
the most suitable option settings, or you can perform a custom
configuration where you individually select each setting.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
Quick installation
This section gives a brief overview of the installation process. For
a more detailed description, refer to page 16, “The Install Pro-
gram”.
1. Card and Socket Services software should be bundled with
your computer; if it is not, contact your dealer. It is re-
commended that you use this software when installing your
PCMCIA 10/100 Mbps Ethernet Card.
A system with Card and Socket Services installed allows
the PCMCIA card to automatically configure itself. While
the system is on, available system resources and insertion
or removal of the card will automatically be detected.
2. Run the INSTALL.EXE program found on your driver disk.
The install program guides you through the installation
process and will install the network drivers needed to run
the card on your network operating system.
If you successfully completed the installation, go to step 5.
If installation was unsuccessful, then go to the next step.
3. If you are using Card and Socket Services, select auto-
configuration. The install program will prompt Card and
Socket Services to assign an available hardware resource
configuration.
4. If you do not have Card and Socket Services or if your card
does not work with your version of Card and Socket Serv-
ices, the enabler program can communicate directly with
the PCMCIA controller on your system. However, you
must select hardware resource settings that are not being
used by other devices; otherwise, your PC system may
have device conflicts.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
15
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
5. Insert the PCMCIA 10/100 Mbps Ethernet Card into the
PCMCIA socket (refer to page 3). Then attach the network
cable to the card.
6. Restart your computer and connect to your network. If you
cannot connect to the network, refer to Appendix B and
Appendix C.
The Install program
Before you can use your PCMCIA 10/100 Mbps Ethernet Card,
you need to install and modify some files in your computer system.
You can make these changes manually, or you can let the
INSTALL.EXE program make them for you.
This section explains how you can use the INSTALL.EXE pro-
gram to install the enablers and the files needed by the network
operating system.
Using the Install program
To run the INSTALL.EXE program, follow these instructions:
At the DOS prompt type “INSTALL” and press [Enter]. You see
an opening screen, which welcomes you to the program and asks if
you wish to continue.
PC M C IA 10/100M bps E thernet C ard In stallation P rogram
D O Y O U WA N T T O P R O C E E D ?
W elco m e to th e PC M C IA 10 /1 0 0 M b p s E th ern et C ard In stallatio n P rog ra m .
IN S TA L L w ill set u p y o ur P C M C IA 1 0/10 0 M bp s E th ern et C a rd .
If yo u r n etw ork op erating system is in stalled , in sert y ou r PC M C IA 1 0 /1 0 0
E th er ne t C ard in any av ailable P C M C IA slo t o n y o u r co m p uter a n d p re ss
< E n ter> to co n tin u e .
O th erw ise p re ss < F 3 > to return to D O S .
< En ter> to con tinu e
< F3> to return to D O S
16
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
Press [Enter] to continue the installation.
The program prompts you for the directory where you want to in-
stall the driver files. You can choose the default directory name or
enter a new name. Then, press <Enter> to continue with the in-
stallation.
PC M CIA 10/100M bps E thern et C ard In stallation P rogram
EN TERIN G TH E INS TA LL AT IO N PAT H
IN S TA L L w ill c re a te
a
d irec to ry w ith all o f th e n e c essa r y file s to u se th e
P C M C IA 1 0 /10 0 M bp s E th e rn e t C a rd . P lea se e nter th e d riv e an d d ire c to ry
n a m e , o r co n fir m th e d e fa u lt dire c to ry.
C :\PC M C IA
<Enter> to con tin ue
< F3> to return to D O S
The next screen asks if you want to do an Auto Configuration or a
Custom Configuration.
PCMCIA 10/100M bps Ethernet Card Installation Program
SELECTING AUTO OR CUSTOM CONFIGURATION
To co nfig ure yo ur P C M C IA 10 /100M bps E th ernet C ard, y ou can select either
A uto C onfiguration or C u stom C on figu ratio n. U sing the A u to C o nfig uration
op tio n, the IN S TA L L program w ill autom atically co nfig ure your P C M C IA
10 /100M bps Ethernet C ard. S elect C ustom C on figu ration if the default
configuratio n does not w o rk for yo u or if yo u w ant to specify the interru pt (IR Q ),
I/O ad dress, an d m em ory ad dress.
Auto Configuration
Custom Configuration
<Enter> to continue
<F3> to return to DOS
Select Auto Configuration if you want to do a quick installation
and use the default configuration settings. If you wish to individu-
ally set any of the settings, then select Custom Configuration.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Auto configuration
To use auto configuration, you must have Card and Socket service
drivers installed. Refer to your computer user’s manual for infor-
mation.
If you selected Auto Configuration, the program auto detects whi-
ch IRQ, I/O Port, and memory space (MEMBASE) the PCMCIA
10/100 Mbps Ethernet Card can use. After successfully auto-
detecting the configuration, the program shows the following
screen:
PC M C IA 10/100M bps Ethernet C ard Installation Program
C O N F IG U R IN G TH E PC M C IA 10/100M bps ET H ER N E T C A R D
The IN STA L L program has detected the follow ing configuration options for your
P C M CIA 10/100M bps Ethernet C ard.
IR Q
I/O BA SE
M EM B A SE
:
:
:
5
0x400
0xD 400
<Enter> to con tinue
<F3> to return to D O S
After the configuration process, you are prompted to select the ty-
pe of network that you are installing. Select a network operating
system from the list by moving the cursor to your selection and
pressing <Enter>.
18
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
PC M C IA 10/100M bps Ethernet C ard Installation Program
SELEC TIN G D R IV ER S
S elect the network drivers that you w ant to install. U se the up and dow n arrow
keys to highlight the desired item . W hen
a
item is highlighted press <E nter>
to select it. If the network driver that you w ant to install is not in the following
list, press <Esc> to continue.
N etware O DI D river
Packet D river
W indows for W orkgroups
LA N M anager
A rtisoft LA Ntastic
<Enter> to continue <Esc>to continue <F3> to return to DO S
After selecting the network operating system, the INSTALL pro-
gram will copy and modify files on your boot drive. Your
CONFIG.SYS file will also be modified to include the Enabler
Driver. You should see the following message if the installation
has been successful:
PCMCIA 10/100M bps Ethernet Card Installation Program
INSTALLATION SUCCESSFUL
IN S TA L L has created/m odified you r A U T O E X E C .B AT and C O N F IG .SY S file
to en able the PC M C IA 10/1 00M bps E th ernet C ard. Th e original files have been
ren am ed to A U T O E X E C .PC M and C O N F IG .PC M . If y ou have any p rob lem s
w ith th e new C O N F IG .SY S file w hen you reb oot you r com p uter, you sh ould
resto re th e original files.
R em ov e the D river D isk and reboot you r com pu ter now.
Press any key to return to DOS
Custom configuration
To perform a custom installation, you need to select the Custom
Configuration Menu after you begin the INSTALL program.
After selecting the Custom Installation Menu, you see a series of
submenus prompting you to select an IRQ and I/O address.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
19
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Interrupt select
The first submenu is the Interrupt submenu. Move the cursor to
the interrupt of your choice and select it by pressing <Enter>. In-
terrupts available for your PCMCIA 10/100 Mbps Ethernet card
include 3, 4, 5, 9, 10, and 11.
PC MC IA 10/100Mbps Ethernet Card Installation Program
SELECTING IN TERRUPTS
Please select the hardware interrupt that you w ould like your PC M CIA
10/100M bps Ethernet Card to use. Use the up and dow n arrow keys to
highlight the desired value. W hen the desired value is highlighted, press
<Enter> to select it.
3
4
5
9
10
11
<Enter> to continue
<F3> to return to DOS
IO port select
Move the cursor to the desired I/O address and press <Enter>.
Available I/O Ports are 300H, 320H, 340H, 360H, 240H and 280H.
CardB us 10/100M bps E thernet Card Installation Program
SELE CTING A N I/O PO RT
Please select the I/O Port that you w ould like your PC M C IA 10/100M bps
Ethernet Card to use.
U se the up and dow n arrow keys to highlight the desired value. W hen
highlighted press <E nter> to select it.
a
value is
300H
320H
340H
360H
240H
280H
<Enter> to continue
<F3> to return to DO S
20
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
Memory space select
Move the cursor to the desired memory space address and press
<Enter>. Available memory space addresses are D000H, D400H,
D800H, and DC00H.
CardB us 10/100M bps Ethernet Card Installation Program
SELECTING
A
M EM ORY ADDR ESS
Please select the m em ory address that you w ould like your PCM C IA 10/100M bps
Ethernet Card to use.
Use the up and down arrow keys to highlight the desired value. W hen
highlighted press <Enter> to select it.
a
value is
D000H
D400H
D800H
DC 00H
<Enter> to continue
<F3> to return to DOS
Manual installation
In most cases, the INSTALL program can make all system
changes necessary for using your PCMCIA 10/100 Mbps Ethernet
Card. However, in some cases, you may wish to make changes
manually. This section explains how to manually make driver and
file modifications to enable your card.
Enablers
You can use CARDGO.EXE to enable the PCMCIA 10/100 Mbps
Ethernet Card.
The CARDGO program
The program CARDGO.EXE communicates with the PC Card
controller of your computer. This program is needed only for
DOS environment network operating systems. You may install
the Socket and Card Services to your notebook before executing
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
21
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
the driver. If you do not have the Socket and Card Services pro-
gram, please contact your notebook vendor.
22
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
The Install program will automatically add a line to your
CONFIG.SYS file using the following syntax and format:
DEVICE=[path_name]CARDGO.EXE [/IRQ=xx] [/IO=xxx][/MEM=xxxx][/?]
where
[/IRQ=xx]
Specifies the hardware interrupt of your card. Default
value is 5.
Valid IRQs are 3, 4, 5, ,9, 10, and 11.
[/IO=xxx]
Specifies the I/O address. Default value is 300.
Valid port addresses are 300, 320, 340, 360, 240, and
280.
[/MEM=xxxx]
Specifies the memory address. Default value is
D400H.
Valid memory addresses are D000H, D400H, D800H,
and DC00H.
[/?]
Displays all possible command syntax.
You can also run CARDGO.EXE by typing “CARDGO” at the
D O S p r o mp t o r b y i n c l u d i n g i t a s a l i n e i n y o u r
AUTOEXEC.BAT file.
After you executed CARDGO.EXE, you will see a display similar
to the following indicating that the installation was successful:
Socket
:
:
:
:
0
05
300H
D000H
IRQ Number
I/O PORT Base
MEM Base
The list of error messages the client driver may display and the
correction methods suggested are given in Appendix B.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Driver installation
The following sections cover installation of the client driver for
Windows NT 3.51, Windows for Workgroups 3.11, Netware
3X/4X, Microsoft LAN Manager, and Artisoft LANtastic Version
6.0.
Microsoft Windows NT 3.51
Follow these instructions to install the Microsoft Windows NT
3.51 client for your Ethernet Card:
1. Insert the Ethernet Card into an available PCMCIA slot.
2. Boot the computer.
3. Click Control Panel in the main window and click the
Network icon.
4. Click Add Adapter. Pull down the adapter’s list and se-
lect <other> Requires disk from manufacturer, then
click Continue.
5. Type “A:\winnt351” (where “A” is your floppy drive) and
click OK.
6. Set the proper IRQ, I/O port, memory address settings, and
connection type for this card.
7. Reboot the computer to complete the installation.
24
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
Microsoft Windows for Workgroups 3.11
Follow these instructions to install the Windows for Workgroups
3.11 client for your Ethernet Card:
1. Run INSTALL.EXE, and choose Windows for Work-
groups.
2. Run Windows by typing “WIN” at the DOS prompt.
3. Click the Network icon in the Main Program Group.
4. Click the Network Setup icon from the Network window.
5. Select the Drivers item from the Network Setup dialog box.
6. Select the Add Adapters item in the Option dialog box.
7. Select Unlisted or Updated Network Adapter when the
Install driver field appears.
8. Type the path “A:\WFW311” and press <Enter>.
9. When the PCMCIA 10/100 Mbps Ethernet Card dialog
box appears, select the options step by step.
10. Follow the instructions on the screen.
11. Reboot your computer.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
25
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Netware 3.X/4.X client
Follow these instructions to install the Netware 3.X/4.X client for
your Ethernet Card:
1. Run the INSTALL program, and select the Netware ODI
Driver.
2. Follow the instructions on the screen to complete the in-
stallation.
3. Reboot the computer.
4. When the computer reboots, log on to the network.
Microsoft LAN Manager
Follow these instructions to install the Microsoft LAN Manager
client for your Ethernet Card:
1. Run the INSTALL program, and choose LAN Manager.
2. Type “lmsetup” in the LAN Manager Directory. Press
<Enter>.
3. Select Network Drivers in “Configuration”. Press <En-
ter>.
4. Select Add New Configs and then press <Enter>.
5. Select Other Driver and press <Enter>.
6. Insert the driver disk into the FDD and click OK.
7. Select the Network Adapter Driver, PCMCIA 10/100
Mbps Ethernet Card, then click OK.
8. Press <Spacebar> to select the desired protocol.
26
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Driver installation for DOS environments
9. Click OK. The message “Configuration Complete” ap-
pears.
10. Click Save, then press <F3> to exit.
Artisoft LANtastic version 6.0
Follow these instructions to install the Artisoft LANtastic Version
6.0 client for your Ethernet Card:
1. Run the INSTALL program, and choose LANtastic.
2. Select Artisoft LANtastic, and specify C:\LANTASTI as
the destination directory.
3. When the Select network adapter screen appears, choose
NDIS Support for Network Adapters.
4. When the install program prompts you for the manufac-
turer’s driver disk in the Enter NDIS driver directory
screen, insert the driver disk.
5. Follow the instructions on the screen to complete the in-
stallation, then reboot the computer to start LANtastic.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Installation for Linux
This section covers the PCMCIA 10/100 Mbps Ethernet Card
driver installation for the Linux environment operating system.
Before you install the PCMCIA 10/100 Ethernet card
Linux driver, you must first configure the PCMCIA
interface in your Linux working environment.
System Requirements
•
•
Linux kernel version 2.0.x or later
PCMCIA interface 3.0.x or later
You can get the latest version of the PCMCIA interface package
from the one of the following URLs:
•
•
After downloading the PCMCIA interface package, refer to the
PCMCIA-HOWTO file for installation instructions.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
• • ! • • • • • • • —Installation for Linux
Installing the driver for Linux
Follow these instructions to install the driver for the Linux op-
erating system:
1. Log on as the “root”.
2. Copy the driver code from the Installation disk using the
following syntax:
mount /dev/fd0 /mnt
cp /mnt/linux/en0100a.tar /tmp
cd /tmp
tar xvf en0100a.tar
3. Generate the driver using the following syntax:
cd /tmp/en0100a
make all
If the path of your PCMCIA source is not
“/usr/src/linux/pcmcia-3.0.9”, you need to modify the
“PCMCIASRC” variable of the “Makefile” file.
Consult your Linux documentation for details.
If the path of your loadable module is not
“/lib/modules/2.0.35”, you need to modify the
“DEST1” & “DEST2” variables of the “Makefile” file.
Consult your Linux documentation for details.
4. Install the driver using the following syntax:
make install
5. Configure the PCMCIA 10/100 Ethernet card using the
following syntax:
cd /etc/pcmcia
Add the following text to the “config” file. The config file
must be in “write” mode.
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
29
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
card “PCMCIA 10/100 Ethernet Card”
version “PCMCIA”, “10/100 Ethernet Card”
bind “pcnet_cs”
6. Configure the PCMCIA NIC interface using the following
syntax:
vi network.opts
7. Reboot Linux using the following syntax:
sync;sync;reboot
30
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Troubleshooting
Q&A for Windows environments
These guidelines give you tips to deal with some problems on us-
ing Ethernet Card. If the problems remain unsolved, contact your
dealer for assistance.
Windows 95/98
Problem: Ejecting the card from the PCMCIA socket
hangs or reboots the computer.
Solution: To prevent this phenomenon from occurring,
stop the card by using the PC Card tool in the Control
Panel or the PC Card icon on the taskbar before you re-
move the card.
Problem: The card cannot be detected when reinserted.
Cause: This is caused by certain unstable PCMCIA status
lines when the card is removed and reinserted. The Win-
dows 95/98 drivers may read an incorrect status during
this period of signal instability, and fail to detect the cor-
rect status of the card.
Solution: The card can be detected by clicking “Refresh”
in Device Manager.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Windows NT 4.0 and 3.51
Question: Does the driver support “hot-swap” on NT 4.0
and 3.51?
Answer: Windows NT 4.0 and 3.51 don’t support hot
swapping. If you want to remove the card, shut down the
computer and remove it.
32
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B
Enabler program error messages
CARDGO.EXE
Here is the list of error messages the CARDGO.EXE may display.
Error
Message
Solution
“The PCMCIA controller is
not present or recognized”
There is no PCMCIA con-
troller on your computer.
Install a PCMCIA controller
from another computer.
[Error 1]
“There is no card in the
PCMCIA slot. Insert the
card.”
Ensure that the PC card is
correctly inserted into the
PCMCIA slot.
[Error 2]
[Error 3]
“The card in PCMCIA slot is
not PCMCIA 10/100 Mbps
Ethernet Card. Insert it”
Ensure that the PC Card in
the notebook’s PCMCIA
slot is the Ethernet Card
and that it is correctly in-
serted.
“The I/O ports do not re-
spond. Change to another
one”
Change to another I/O port
using /IO=xxx. Refer to
“Manual Installation” in
Chapter 4.
[Error 4]
“The I/O ports specified are
invalid. Change to another
one”
Valid I/O addresses are
240, 280, 300, 320, 340,
and 360.
[Error 5]
[Error 6]
“The IRQ specified is invalid. Valid IRQ values are 3, 4,
Change to another one” 5, 9, 10, and 11.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
PCMCIA 10/100 Mbps Ethernet PC Card User’s Manual
Error
Message
Solution
“The memory address
specified is invalid. Change
to another one”
Valid memory addresses
are D000, D400, D800, and
DC00.
[Error 7]
“Enabler has been regis-
tered”
The client driver has al-
ready been registered. You
don’t need to install the
client driver again.
[Error 8]
[Error 9]
These three errors are con-
cerned with Socket and
Card services of the
•
“Enabler can’t be
registered as a client”
•
•
“Can’t map memory”
PCMCIA controller.
“Configuration can’t be
requested”
Try using another third
party Socket and Card
service that supports this
PCMCIA controller.
34
ꢀꢁ! ꢂꢃꢄꢅꢆꢇ
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix C
Specifications
IEEE 802.3 10Base-T, 802.3u 100Base-TX
Standards Compliance:
Card Size:
5.0mm Type II
Full or Half duplex for both 10 and 100 Mbps
Connection Mode:
Media Supported:
Category-3,4,5 for 10Base-T
Category 5 for 100Base-TX
100m maximum hub-to-node distance
Female RJ-45 connector
68-pin 16-bit PCMCIA socket connector
10ºC to 50ºC
Operating Distance:
Network Interface:
Socket Interface:
Operating Temperature:
Certification:
FCC/VCCI/CE Class B
85.6 x 54 x 5 mm
Dimensions:
5V power supply and 3.3V operation
Power Consumption:
750mW/10 Mbps mode, 1150mW/100 Mbps mode
35
Download from Www.Somanuals.com. All Manuals Search And Download.
|