Quick Installation Guide
TEW-429UB
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Before You Start
Package Content
TEW-429UB
Driver & Utility CD-ROM
Quick Installation Guide
System Requirements
CD-ROM Drive
Computer with an available USB port
CPU: 300 MHz or above
Memory: 128 MB or above
Hard Drive Space: 20MB or above
802.11b or 802.11g Access Point (for Infrastructure Mode) or another
802.11g Wireless Adapter (for Ad-Hoc/Peer-to-Peer networking mode).
Windows XP/2000/ME/98SE
Application
108Mbps High Speed
802.11g Wireless Access Point
(TEW-450APB)
108Mbps High Speed 802.11g
Wireless Access Point
(TEW-453APB)
108Mbps 802.11a+g
Wireless Access Point
(TEW-510APB)
54Mbps 802.11g
Wireless Access Point
(TEW-430APB)
108Mbps 802.11g MIMO
Wireless Access Point
(TEW-610APB)
54Mbps 802.11g Wireless
USB 2.0 Adapter with HotSpot Finder
(TEW-429UB)
detected
connected
*Laptop/PC is not required to detect HotSpots
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Using the Hot Spot Detector
The following table illustrates each button's function.
Seek Next
Power
Button
Functions
Power
Switch Power on/off
1. Press [Seek] to search
hotspots
2. Press and hold the [Seek]
button for 2 seconds to use
different scanning features
Seek
Next
View the next access point
2
Download from Www.Somanuals.com. All Manuals Search And Download.
The following illustration explains the meaning for each symbol on the LCD
display.
Displays the SSID of the access point. If the SSID is
longer than 16 characters, it will scroll horizontally.
SSID
Displays the channel in use.
Channel
Entry
Displays the current entry. The TEW-429UB can hold a
maximum of 16 entries.
Indicate the battery life status.
Battery low
Power
Battery full
At “adapter” mode, or charging the battery through
USB port
3
Download from Www.Somanuals.com. All Manuals Search And Download.
There are 3 scan modes (S, F and D mode). Hold the
“Seek” button to toggle between scan modes. After
switching to the desired scan mode, press “Seek” button
again to do a site survey.
[S] Mode: Ranks access points in the order of
signal strength.
Scan
mode
[F] Mode: Lists all unecrypted access points
(access points without security) and ranks each
access piont in signal strength order.
[D] Mode: Locks onto one access point to test its
signal strength at different locations.
Indicates security setting of the wireless network.
WPA security is enabled
Security
WEP security is enabled
Wireless security is disabled (no security)
Indicates the signal strength and the radio band
(802.11b/g) of wireless network. There are 5 levels of
signal strength.
Signal
802.11g mode at 2.4 GHz band
802.11b mode at 2.4 GHz band
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. How to Install
Note: Do not connect the Wireless USB Adapter to your computer until you
have finished installing the Wireless Client Utility.
For Windows Users
1. Insert the Utility & Driver CD-
ROM into your computer's CD-
ROM Drive and then click Install
Utility.
2. Follow the InstallSheild Wizard
instructions. Click Finish.
Note: The TEW-429UB is hot pluggable, you can connect or disconnect the
TEW-429UB while the computer is on. After inserting the TEW-429UB into one
of your USB ports, the Found New Hardware window appears.
3. Connect the TEW-429UB into your
computer's USB port.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The Found New Hardware
Wizard appears, select No, and
then click Next.
5. Click Next.
6. Click Finish.
Your installation is now complete.
Note: After installation is complete, a Wireless icon will appear in you system
tray (next to the clock on the bottom right corner of your screen). If it does not
appear, restart your computer. Go to Section 4 Wireless Configuration to
configure the TEW-429UB.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Wireless Configuration
Note: Wireless configuration requires a 802.11b or 802.11g Access Point (for
Infrastructure Mode) or another 802.11g Wireless Adapter (for Ad-Hoc/Peer-to-
Peer networking mode).
1. Double-click the wireless icon on
your system tray.
2. Click Profile and then click Add.
3. Click Browse.
4. Double-click the SSID that
matches your wireless access
point.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Click Next.
6. Select Security corresponding to
the wireless network and then click
Next.
Note: If your wireless network has wireless security, then the Wireless Client
Utility will instruct you to enter wireless security settings before continuing to
the steps below. Refer to the User's Guide regarding Wireless Secuity.
7. Verify Advanced Settings and
Wireless Mode and then click
Next.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Click Activate Now.
9. Verify that the Link Status is
Connected.
Your installation is now complete.
For detailed information regarding the TEW-429UB configuration and advanced
settings, please refer to the User's Guide included on the Utility & Driver CD-
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Q1: I inserted the Utility & Driver CD-ROM into my computer's CD-ROM Drive and the
installation menu does not appear automatically. What should I do?
A1: If the installation menu does not appear automatically, click Start, click Run, and type
D:\Autorun.exe where "D" in "D:\Autorun.exe" is the letter assigned to your computer's CD-
ROM Drive. And then click OK to start the installation.
Q2: I completed all the steps in the Quick Installation Guide, but my Wireless USB Adapter
isn't connecting to my access point. What should I do?
A2: First, verify that the Network Name (SSID) matches your wireless router or wireless
access point's SSID. Second, you should check your TCP/IP properties to ensure that Obtain
an IP address automatically is selected. Third, you can click on the Site Survey tab of the
Wireless Client Utility to check and see if there are any available wireless networks listed.
Q3: Windows is unable to recognize my hardware. What should I do?
A3: Make sure your computer meets the minimum requirements as specified in Section 1 of
this Quick Installation Guide. Also make sure that you install the Wireless Client Utility
(as described in Section 3) before connecting the Wireless USB Adapter. If Windows is still
unable to recognize your hardware, then try installing the Wireless USB Adapter to a different
USB port of your computer.
Q4: I cannot open the Wireless Configuration Utility. What should I do?
A4: Go to your Device Manager to make sure the adapter is installed properly. If you see a
networking device with a yellow question mark or exclamation point, you will need to reinstall
the device and/or the drivers. To access your Device Manager, right-click My Computer, click
Properties, click the Hardware tab, and then click Device Manager.
If you still encounter problems or have any questions regarding the TEW-429UB, please refer to
the User's Guide included on the Utility & Driver CD-ROM or contact Trendnet's Technical Support
Department.
Certifications
This equipment has been tested and found to comply with FCC and CE Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received. Including interference that may cause
undesired operation.
Waste electrical and electronic products must not
be disposed of with household waste. Please
recycle where facilities exist. Check with you Local
Authority or Retailer for recycling advice.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE
CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS
COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
TRENDnet Technical Support
US/Canada Support Center European Support Center
Contact
Contact
Telephone: 1(866) 845-3673
Email: [email protected]
Visit our website for detail contact
information
Tech Support Hours
24/7 Toll Free Tech Support
Product Warranty Registration
Please take a moment to register your product online.
3135 Kashiwa Street
Torrance, CA 90505
USA
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright ©2006. All Rights Reserved. TRENDnet.
|