COMBINATION
DOME CAMERA SYSTEMS
Combination Dome Cameras
For Outdoor Use
For Indoor Use
C-CC564
C-CC764
multi function type
multi function type
C-CC514
C-CC714
standard type
standard type
with Ceiling Mount
Cover C-BC511C
Brackets and Cover
For Outdoor Use
For Indoor Use
C-BC711P
C-BC711PM
Pole Mounting
Bracket
C-BC511C
Ceiling Mount
Cover
C-BC511P
C-BC511U
C-BC511A
Ceiling Suspension
Bracket
Ceiling Suspension
Bracket
Flush Ceiling
Anchor Bracket
Mounting Bracket
C-BC711W
Wall Mounting
Bracket
C-A711DM
Smoked Dome
Cover
C-BC511C-S
Ceiling Mount
Cover (Smoked)
C-BC511W
Wall Mounting
Bracket
C-BC511U-S
Flush Ceiling Mounting
Bracket (Smoked)
Controller and Units
C-AL80
C-RM500
C-IF500
Alarm Unit
Remote Controller
Interface Unit
Download from Www.Somanuals.com. All Manuals Search And Download.
FEATURES
■
Programmable camera operation initiated
by alarm input.
■
Protecting user privacy.
a) Privacy Masking function.*
A useful Alarm function allows programming camera operation
that can be activated by an alarm input.
Depending on system use requirements, there may be
several areas that the system administrator decides does not
require surveillance for whatever reason. Users are allowed
to select in advance the locations they wish to be excluded
from surveillance in a camera's field of view.
Onscreen selected areas can be masked with a rectangle
and a maximum of 8 areas (a single screen can have 2
masked areas) can be masked for privacy.
Desired camera operations such as position replay, touring,
tracing, and control of the auxiliary terminal can be programmed
to activate when the camera receives an alarm input. Each
camera is equipped with three (C-CC564 has eight) alarm inputs
and each alarm input can be set to respond with different
preprogrammed operation.
■
Preset operation start with Timer program
function.
A camera can conveniently be set to begin operation at a
preset time with an builtin timer. Each camera has a clock
function that can be set to initiate operation at a preset time.
The timer can be set for a specific date, day of the week, or
daily. Up to 16 different timer programs can be set.
■
Software for maintenance.
b) Restricting camera movement.
TOA cameras include dedicated software that allows easy
titles to be set and to create a backup of parameters with
a PC.
In addition to masking areas for privacy, a hardware-oriented
method is also available. A camera's rotation range in both
horizontal and vertical directions can be restricted to exclude
areas from surveillance.
■
Flexible installation options.
TOA cameras can easily be installed on ceilings, walls or on
■
Outdoor installation ready.
(meets IP66 standards)
poles thanks to the wide range of mounting brackets available.
C-CC714 and C-CC764 utilize a waterproof and dustproof
design that fully conforms to IP66 standards and can be safely
installed outdoors. Cameras are cased in a special housing that
withstands outdoor conditions, allowing them to be installed
outdoors, even if the location is directly exposed to rain.
■
Titling options.
To facilitate camera use, various titles can be input and displayed
on the monitor. In addition to camera and position titles, other
titles for display include trace title, displayed while the trace
function is on, tour title, displayed when tour function is activated,
and alarm title displayed when an alarm input is received.
■
Withstands cold weather conditions.
■
Other functions.
C-CC714 and C-CC764 incorporate a heating circuit that allows
operation in severe temperatures down to –40°C. Heating is
automatically turned on when ambient temperatures go below
0°C and will automatically switch off when the temperatures rise.
•Tilt (vertical) range: +5° — –185°.*
•Auto flip function*
•Rotation speed can be varied to match lens zooming ratio
in manual operation mode.
Note: Turning the camera on if the camera interior is below 0°C may
not result in producing an immediately viewable image. Once the
camera interior temperature rises above 0°C, images will be viewable.
•Freeze preset function*
Displays the still image during camera movement between preset positions.
•Flicker-free operation
•The camera is equipped with 3 (C-CC564 has 8) alarm
inputs and 1 auxiliary contact output.
•RS-485 protocol control.
■
Route tracing facilitates subject monitoring.
In order to make it easy to follow a subject
along a route, the camera can be set to
automatically monitor preset points for
up to 60 seconds. Two different routes
can be programmed.
Function Comparison Chart
C-CC514
C-CC564
C-CC714
C-CC764
Minimum Illumination
1 lx (50 IRE)
3 lx (50 IRE)
1 lx (20 IRE)
1 lx (50 IRE)
0.3 lx (20 IRE)
3 lx (50 IRE)
1 lx (20 IRE)
(High-Sensitivity: OFF) 0.3 lx (20 IRE)
Wide Dynaic Function
—
—
●
●
—
—
●
●
B/W Mode Function
Optical Zooming
22x
23x
22x
23x
■
Configuring programmable tours.
Zoom Speed
(WIDE end to TELE end)
(preset operation)
Approx. 1.3s
Approx. 2.4s
Approx. 1.6s
Approx. 2.9s
Approx. 1.3s
Approx. 2.4s
Approx. 1.5s
Approx. 2.9s
Through combinations of the 255 preset positions and trace
function, a camera can be programmed to automatically and
continuously repeat a travel pattern as a tour. Up to 16 tour
patterns can be programmed. Any tour program is able to
have a different travel pattern that can be activated by an
alarm input or timer.
(manual operation)
Rotating Range (Tilting)
Operating Temperature
Dust/Water Capability
Auto Flip Function
+5° to – 95°
+5° to – 185°
+5° to – 90°
+5° to –185°
–10˚C to +50˚C
–40˚C to +50˚C
IP66
—
—
—
—
●
●
—
—
●
●
Freeze Preset Function
Privacy Mask Function
Up to 8
(up to 2 each frame)
Up to 8
(up to 2 each frame)
—
—
—
—
Motion Detection Function
●
●
*C-CC764 and C-CC564 only
Download from Www.Somanuals.com. All Manuals Search And Download.
C-CC764/C-CC-714
COMBINATION DOME CAMERA (OUTDOOR USE)
C-CC764 FEATURES
• 255 preset positions
C-CC714 FEATURES
• 255 preset positions
• 276X zoom (optical 23X, electronic 12X)
• Tilt rotation range +5° – -185°
(using Auto-Flip function)
• Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
• 264X zoom (optical 22X, electronic 12X)
• Tilt rotation range +5° – 90°
• Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
• Autofocus
• Wide dynamic range
• Autofocus
• High-sensitivity function
(color mode)
• Preset sequency function
• Restricting camera movement
• Auto-trace function
• Auto-tour function
• Auto-pan function
• High-sensitivity function
(color and B/W modes)
• Preset sequency function
• Privacy masking function
• Restricting camera movement
• Auto-trace function
• Dust/Water Protection: IP66
• RS-485 protocol compatible
• Auto-tour function
• Motion detection function
• Auto-pan function
• Preset image freeze function
• Dust/Water Protection: IP66
• RS-485 protocol compatible
C-CC714 SPECIFICATIONS
C-CC764 SPECIFICATIONS
Power source
Power consumption
Control
24V AC 50/60Hz (2P loose end)
Power source
Power consumption
Control
24V AC 50/60Hz (2P loose end)
10W (normal operation), 80W max.
10W (normal operation), 80W max.
RS-485 communications system (new protocol compatible)
VBS 1.0V(p-p), 75Ω, BNC-R jack
RS-485 communications system (new protocol compatible)
VBS 1.0V(p-p), 75Ω, BNC-R jack
Video Output
Video Output
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)
Camera Control Terminal RS-485 camera control connector, multi-pair cable 8P, loose end (3P of 8P)
Alarm Input
3 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action),
multi-pair cable 8P, loose end (3P of 8P)
Alarm Input
3 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action),
multi-pair cable 8P, loose end (3P of 8P)
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)
permissible current: Under 100mA, multi-pair cable 8P, loose end (1P of 8P)
Synchronization
ID
Internal synchronization/power synchronization
Synchronization
ID
Internal synchronization/power synchronization
(phase adjustable when in power synchronization mode)
(phase adjustable when in power synchronization mode)
8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
No. of Preset Positions
Automatic Operation
Timer
255 Positions
No. of Preset Positions
Automatic Operation
Timer
255 Positions
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Camera
Camera
Image device
Resolution
S/N ratio
1/4 type CCD
Horizontal: 480 lines (at center)
50dB
Image device
Resolution
S/N ratio
1/4 type CCD
Horizontal: 480 lines (at center)
50dB
Minimum Illumination
High-sensitivity function 0FF: 1 lx (50 IRE), 0.3 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Minimum Illumination
High-sensitivity function 0FF: 3 lx (50 IRE), 1 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Backlight Compensation Pattern 1/Pattern 2/Pattern 3/OFF
High-Sensitivity Function Slow shutter mode (32 times max.)
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF
Dynamic Range 46dB (backlight compensation: WIDE DYNAMIC operation)
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)
White Balance
Flicker Reduction
Electronic Zooming
Auto-Focus
ATW/AWB
Automatic correction
12x zooming
White Balance
Flicker Reduction
Electronic Zooming
Auto-Focus
ATW/AWB
Automatic correction
12x zooming
One push/stop AF/continuous
Lens
One push/stop AF/continuous
Zooming
22x
Lens
Effective Focal Length
Effective Angle of View
Maximum Aperture
Zoom Speed
f = 4.0 – 88mm (22X)
Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)
F 1.6 (W) – F 3.8 (T)
WIDE end to TELE end
Approx. 1.3s (preset operation), Approx. 2.4s (manual operation)
Zooming
23x
Effective Focal Length
Effective Angle of View
Maximum Aperture
Zoom Speed
f = 3.6 – 82.8mm (23X)
Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)
F 1.6 (W) – F 3.7 (T)
WIDE end to TELE end
Approx. 1.5s (preset operation), Approx. 2.9s (manual operation)
Pan/Tilt Head
Rotating Range
Rotating Speed
Panning: Endless 360° rotation, Tilting: +5° to –90°
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Pan/Tilt Head
Rotating Range
Rotating Speed
Panning: Endless 360° rotation, Tilting: +5° to –185°
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Other Function
Manual Limit
Operating Temperature
Operating Humidity
Application
–40˚C to +50˚C
Under 90% RH (no due condensation produced)
Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)
IP66
Case, top cover and decorative frame: PC resin, light gray
Sunshade: Aluminum, light gray, paint
Dome cover: PC resin (transparent)
Camera section external diameter: ø230
Dome external diameter: ø 150mm
Other Function
Auto-Pan, Freeze Preset, Manual Limit, Privacy Masking (up to 8),
Motion Detect (each 8 presets at each 4 positions)
–40˚C to +50˚C
Under 90% RH (no due condensation produced)
Indoors and outdoors (except seaside, industrial districts and locations exposed to fine particles,
where the unit is subject to corrosion, and heights that expose the unit to strong wind pressure)
Operating Temperature
Operating Humidity
Application
Dust/Water Protection
Finish
Dust/Water Protection
Finish
IP66
Case, top cover and decorative frame: PC resin, light gray
Sunshade: Aluminum, light gray, paint
Dome cover: PC resin (transparent)
Dimensions
×
330.5 (H)mm
Weight
Accessory
3.9kg
Dimensions
Camera section external diameter: ø230
Dome external diameter: ø 150mm
3.9kg
×
330.5 (H)mm
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,
CD-R (Camera controller software, manual (PDF)) × 1
Weight
Option
Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM
Accessory
Top cover mounting screw (Hexagon socket screw M4 × 8) × 3,
CD-R (Camera controller software, manual (PDF)) × 1
Option
Wall mounting bracket: C-BC711W, Suspension bracket: C-BC711P,
Pole mounting bracket: C-BC711PM, Smoked dome cover: C-A 711DM
Download from Www.Somanuals.com. All Manuals Search And Download.
C-CC564/C-CC514
COMBINATION DOME CAMERA (INDOOR USE)
C-CC564 FEATURES
• 255 preset positions
C-CC514 FEATURES
• 255 preset positions
• 276X zoom (optical 23X, electronic 12X)
• Tilt rotation range +5° – -185°
(using Auto-Flip function)
• Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
• 264X zoom (optical 22X, electronic 12X)
• Tilt rotation range +5° – 90°
• Pan rotation range continuous 360°
• Pan/tilt maximum rotating speed is 360°/sec
• 1/4 type CCD image device
• 480 lines high resolution
• Autofocus
• Wide dynamic range
• Autofocus
• High-sensitivity function
(color mode)
• Preset sequency function
• Restricting camera movement
• Auto-trace function
• Auto-tour function
• Auto-pan function
• High-sensitivity function
(color and B/W modes)
• Preset sequency function
• Privacy masking function
• Restricting camera movement
• Auto-trace function
• RS-485 protocol compatible
• Auto-tour function
• Motion detection function
• Auto-pan function
• Preset image freeze function
• RS-485 protocol compatible
C-CC514 SPECIFICATIONS
C-CC564 SPECIFICATIONS
Power source
Power consumption
Control
24V AC 50/60Hz
Power source
Power consumption
Control
24V AC 50/60Hz
9W (normal operation), 19W max. (1.3A max.).
RS-485 communications system (new protocol compatible)
VBS 1.0V(p-p), 75Ω, BNC-R jack
9W (normal operation), 19W max. (1.3A max.)
RS-485 communications system (new protocol compatible)
VBS 1.0V(p-p), 75Ω, BNC-R jack
Video Output
Video Output
Camera Control Terminal RS-485 camera control connector
Alarm Input 3 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action)
Camera Control Terminal RS-485 camera control connector
Alarm Input 8 channels, no-voltage make contact input, open voltage: 18V DC,
short-circuit current; Under 2mA (settable alarm action)
Auxiliary Contact Output 1 channel, open collector output, withstand voltage: 30V DC,
Auxiliary Contact Output 2 channels, open collector output, withstand voltage: 30V DC,
permissible current: Under 100mA,
permissible current: Under 100mA
relay contact output, permissible voltage: 110V DC, 125V AC,
permissible current: Under 1A
Synchronization
ID
Internal synchronization/power synchronization
(phase adjustable when in power synchronization mode)
Synchronization
ID
Internal synchronization/Power synchronization
8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
(phase adjustable when in power synchronization mode)
8 characters (alphanumeric and symbols)
Camera, Position, Trace, Auto-pan, Tour, Home, Alarm, Sector, AUX
No. of Preset Positions
Automatic Operation
Timer
255 Positions
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
No. of Preset Positions
Automatic Operation
Timer
255 Positions
Auto-pan, Preset sequence, Auto-trace (2 preset patterns (60s)), Tour (16 preset patterns)
Refresh: Starts at the preset time every day or every week by timer settings
Program: Settable 16 actions
Camera
Image device
Resolution
S/N ratio
1/4 type CCD
Horizontal: 480 lines (at center)
50dB
Camera
Image device
Resolution
S/N ratio
1/4 type CCD
Horizontal: 480 lines (at center)
50dB
Minimum Illumination
High-sensitivity function 0FF: 1 lx (50 IRE), 0.3 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Minimum Illumination
High-sensitivity function 0FF: 3 lx (50 IRE), 1 lx (20 IRE)
High-sensitivity function 0N: 0.03 lx (50 IRE), 0.01 lx (20 IRE)
Backlight Compensation Pattern 1/Pattern 2/Pattern 3/OFF
High-Sensitivity Function Slow shutter mode (32 times max.)
Backlight Compensation WIDE DYNAMIC/Pattern 1/Pattern 2/Pattern 3/OFF
Dynamic Range 46dB (backlight compensation: WIDE DYNAMIC operation)
High-Sensitivity Function B/W mode and slow shutter mode (32 times max.)
White Balance
Flicker Reduction
Electronic Zooming
Auto-Focus
ATW/AWB
Automatic correction
12x zooming
White Balance
Flicker Reduction
Electronic Zooming
Auto-Focus
ATW/AWB
Automatic correction
12x zooming
One push/stop AF/continuous
Lens
Zooming
22x
One push/stop AF/continuous
Effective Focal Length
Effective Angle of View
Maximum Aperture
Zoom Speed
f = 4.0 – 88mm (22X)
Horizontal: 47.3° (W) – 2.2° (T), Vertical: 36.5° (W) – 1.7° (T)
F 1.6 (W) – F 3.8 (T)
WIDE end to TELE end
Approx. 1.3s (preset operation), Approx. 2.4s (manual operation)
Lens
Zooming
23x
Effective Focal Length
Effective Angle of View
Maximum Aperture
Zoom Speed
f = 3.6 – 82.8mm (23X)
Horizontal: 54° (W) – 2.5° (T), Vertical: 41.6° (W) – 1.9° (T)
F 1.6 (W) – F 3.7 (T)
WIDE end to TELE end
Approx. 1.5s (preset operation), Approx. 2.9s (manual operation)
Pan/Tilt Head
Rotating Range
Rotating Speed
Panning: Endless 360° rotation, Tilting: +5° to –90°
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Pan/Tilt Head
Rotating Range
Rotating Speed
Panning: Endless 360° rotation, Tilting: +5° to –185°
Panning/Tilting: 360°/s max. (preset operation), 360°/s max. (manual operation)
Other Function
Operating Temperature
Operating Humidity
Application
Manual Limit
–10˚C to +50˚C (continuously active for operation at temperature below 0°C)
Under 90% RH (no due condensation produced)
Indoor used
Other Function
Auto-Pan, Freeze Preset, Manual Limit, Privacy Masking (up to 8),
Motion Detect (each 8 presets at each 4 positions)
Finish
Base: PC/ABS resin, cool gray
Camera: PC/ABS resin, black
Operating Temperature
Operating Humidity
Application
–10˚C to +50˚C (continuously active for operation at temperature below 0°C)
Under 90% RH (no due condensation produced)
Indoor used
Dimensions
Weight
ø168
1.7kg
×
234 (H)mm
Finish
Base: PC/ABS resin, cool gray
Camera: PC/ABS resin, black
Accessory
Camera mounting screw × 4, Safety wire × 1,
CD-R (Camera controller software, manual (PDF)) × 1
Dimensions
Weight
ø168
1.7kg
×
234 (H)mm
Option
Ceiling mount cover: C-BC511C, C-BC511C-S
Flush ceiling mounting bracket: C-BC511U, C-BC511U-S
Ceiling suspension bracket: C-BC511P
Wall mounting bracket: C-BC511W
Accessory
Camera mounting screw × 4, Safety wire × 1,
CD-R (Camera controller software, manual (PDF)) × 1
Anchor bracket: C-BC511A
Option
Ceiling mount cover: C-BC511C, C-BC511C-S
Flush ceiling mounting bracket: C-BC511U, C-BC511U-S
Ceiling suspension bracket: C-BC511P
Wall mounting bracket: C-BC511W
Anchor bracket: C-BC511A
Download from Www.Somanuals.com. All Manuals Search And Download.
Brackets and Dome Cover for C-CC764/C-CC-714 (Outdoor Use)
C-A711DM
C-BC711P
C-BC711W
Smoked Dome Cover
Suspension Bracket
Wall Mounting Bracket
The C-BC711P is exclusively designed to be
used to suspend TOA's outdoor
combination camera from a ceiling or eaves.
The C-BC711W is designed to be used to
mount TOA's outdoor combination camera
on a wall.
The C-A711DM Smoked Dome Cover is specially designed to
be used in conjunction with TOA's Combination Cameras.
The Dome Cover is used to make it difficult for individuals to
see the camera's orientation.
Finish
Base: Aluminum, light gray, paint
Pipe: Stainless steel (SUS304)
Finish
Base: Aluminum, light gray, paint
Pipe: Stainless steel (SUS304)
Dimensions
Weight
140 (W) × 164 (H) × 200 (D)mm
Dimensions
Weight
140 (W) × 240 (H) × 188.1 (D)mm
1.3kg
1kg
Transmissivity Approx. 30%*
Accessory
Camera mounting screw (M5×12, with washer) × 3
Accessory
Camera mounting screw (M5×12, with washer) × 3
Finish
Dome: PC resin, smoked
Frame: PC resin, light gray
Note: pay attention to the strength of the attaching portion.
Note: pay attention to the strength of wall surface.
Dimensions
Weight
ø219.8 × 128 (H)mm
(Dome external diameter: ø150mm)
400g
C-BC711PM
*As a general guideline, the minimum object illumination of the camera equipped with the
Smoked Dome Cover is approximately 3.3 times that of the camera without the cover.
Note: Be careful when installing the camera with this cover in low illumination location as the
cover may cause camera sensitivity to decrease.
Pole Mounting Bracket
Using the optional YS-60B and C-BC711W, the
C-BC711PM can mount the outdoor combination
camera on a pole.
Finish
Stainless steel (SUS304)
140 (W) × 200 (H) × 60 (D)mm
700g
Dimensions
Weight
Note: Reinforce the pole mounting bracket and mounting band separately for security when
installing the camera in locations exposed to vibration or strong winds.
Maintenance the unit, mounting bracket and mounting band periodically to ensure that there
are no loose joint nor rickety parts.
Brackets and Dome Cover for C-CC564/C-CC-514 (Indoor Use)
C-BC511A
C-BC511C
C-BC511C-S
Anchor Bracket
Ceiling Mount Cover
Ceiling Mount Cover (Smoked)
The C-BC511A is specially designed to
mount TOA's Combination Cameras directly
on the wall. The bracket facilitates mounting of the camera on the
plasterboard in the double ceiling or other locations where the
mounting screws cannot be installed securely.
The C-BC511C is a camera installation cover
designed solely for mounting TOA's
The C-BC511C-S is a camera installation
cover designed solely for mounting TOA's
Combination Cameras. The cover is used when
Combination Cameras. The cover is used when
mounting the Combination camera directly to a
ceiling or wall or suspending it from the ceiling. The cover is used
to make it difficult for individuals to see the camera's orientation.
mounting the Combination camera directly to a
ceiling or wall or suspending it from the ceiling. The cover is used
to make it difficult for individuals to see the camera's orientation.
Finish
Case: PC/ABS resin, cool gray
Dome cover: Acrylic resin, transparent
Transmissivity Approx. 20%*
Finish
Surface-treated steel plate, black, paint
132 (W) × 30 (H) × 70 (D)mm
Finish
Case: PC/ABS resin, cool gray
Dome cover: Acrylic resin, smoked
Dimensions
Weight
Dimensions
Weight
ø168 × 182.2 (H)mm
(Dome external diameter: ø125mm)
1.1kg
Dimensions
Weight
ø168 × 182.2 (H)mm
(Dome external diameter: ø125mm)
Accessory
Camera mounting screw × 4, Safety wire × 1, Paper pattern × 1
220g
220g
*As a general guideline, the minimum object illumination of the camera equipped with the
Ceiling Mount Cover is approximately 5 times that of the camera without the cover.
Note: Be careful when installing the camera with this cover in low illumination location as the
cover may cause camera sensitivity to decrease.
C-BC511P
Ceiling Suspension Bracket
The C-BC511P is a Ceiling Suspension Bracket
designed solely for suspending TOA's
Combination Cameras from the ceiling.
C-BC511U
Flush Ceiling Mounting
Bracket
C-BC511U-S
Flush Ceiling Mounting
Bracket (Smoked)
The C-BC511U bracket is designed to be
exclusively used for flush ceiling mounting
of TOA's combination camera. Use this bracket
when mounting the camera to the ceiling surface
The C-BC511U-S bracket is designed to
be exclusively used for flush ceiling
Finish
Top cover: PC/ABS resin, cool gray
Pipe: Stainless steel (SUS304)
Bracket: Surface-treated steel plate, black, paint
mounting of TOA's combination camera.
Use this bracket when mounting the camera to
Dimensions
Weight
ø150 × 233mm
where the fixing screws cannot be securely installed, such as on
the plaster panel of the dual-construction ceiling. Also, use this
bracket to minimize the exposure of the camera.
the ceiling surface where the fixing screws cannot be securely
installed, such as on the plaster panel of the dual-construction
ceiling. Also, use this bracket to minimize the exposure of the
camera. The bracket is used to make it difficult for individuals to
see the camera's orientation.
1.2kg
Accessory
Top cover × 4, Safety wire × 1, Pattern paper × 1
Finish
Bezel: PC/ABS resin, cool gray
Dome cover: Acrylic resin, transparent
Bracket: Aluminum, black, paint
Surface-treated steel plate, black, paint
Transmissivity Approx. 20%*
C-BC511W
Finish
Bezel: PC/ABS resin, cool gray
Dimensions
ø250 × 282.7 (D)mm
(Dome external diameter: ø125mm)
Dome cover: Acrylic resin, smoked
Bracket: Aluminum, black, paint
Surface-treated steel plate, black, paint
Wall Mounting Bracket
Weight
1.2kg
The C-BC511W Wall Mounting
Bracket is specially designed to mount
TOA's Combination Cameras to wall
surfaces. Install the unit only in a location
that can structurally support weight of the
unit and camera.
Dimensions
ø250 × 282.7 (D)mm
(Dome external diameter: ø125mm)
Accessory
Safety wire × 1, Paper pattern × 1
Weight
1.2kg
Accessory
Safety wire × 1, Pattern paper × 1
* As a general guideline, the minimum object illumination of the camera equipped with the
Flush Ceiling Mounting Bracket is approximately 5 times that of the camera without the bracket.
Note: Be careful when installing the camera with this bracket in low illumination location as the
cover may cause camera sensitivity to decrease.
Finish
Top cover: PC/ABS resin, cool gray
Pipe: Stainless steel (SUS304)
Bracket: Surface-treated steel plate, black, paint
Dimensions
Weight
150 (W) × 203 (H) × 203 (D)mm
1.1kg
Accessory
Top cover × 4, Safety wire × 1, Paper pattern × 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Combination Dome Camera
SETTING GUIDE
SETTING GUIDE
The camera menu screens are comprised of the following
Sets the stop duration of trace movements.
Sets the operation to be programmed.
TRACE 2 PAUSETIME
TOUR
setting item screens.
CAMERA MENU
PRESET
Sets alarm operations.
ID SETTING
CAMERA
ALARM SETTINGS
AUTO MODE
Sets input number of alarm input.
INPUT
Sets the terminal that transmits the alarm
information.
REPORT
Setting Item
Selects whether to activate the alarm input
with make or break contacts.
ACTIVE
Programs the camera position (camera orientation),
displays setting status, and performs reset.
PRESET SETTING
Sets whether to forcibly execute action or to
set priority order to operation.
PRIORITY*4
ACTION*4
CLOCK
PRESET MEMORY*1
Programs the camera position.
Sets camera operation when alarm signal
is received.
GLOBAL PRESET
MEMORY CORRECTION
Sets the period of time that alarm conditions
are maintained.
Corrects all preset camera positions.
Sets camera operation when the alarm
conditions are released.
RESET ACTION*4
ALARM LOGS
PRESET MEMORY RESET
PRESET MEMORY ALL RESET
AUTOMATIC RETURN
Resets preset camera position.
Verify alarm logs.
Resets all preset camera positions.
The camera returns to the preset position
automatically when the preset period of
time elapses by external control.
Sets contact output.
CONTACT OUTPUT SETTINGS
Designates the program the camera
automatically returns to.
HOME
Sets contact output.
Sets contact output.
AUX1
Displays the still image during camera
movement between preset positions.
FREEZE PRESET
AUX2*5
Sets the title.
ID (TITLE) SETTINGS
Sets the timer.
TIMER SETTINGS
DISPLAY
Sets to display or hides the title.
Sets ID.
Sets predetermined operations to be
performed at preset times.
PROGRAM*4
TIME DISPLAY
DATE DISPLAY
TIMER
ID SETTINGS*2
Sets time display to 12-hour or 24-hour
display formats.
DISPLAY POSITION SETTINGS*2
FRAME ADJUSTMENT SETTINGS
ANGLE ORIGIN POINT SETTING
Sets title display position and its length.
Sets date display.
Sets the time.
Sets the date.
Sets the character display position.
Sets the origin point of the angle display.
DATE
Sets camera properties.
CAMERA SETTINGS
Individual settings.
MANUAL SETTINGS
WHITE BALANCE*2
Sets the camera's white balance.
Sets the backlight compensation.
Adjusts the camera's brightness.
Resets zoom interlocking.
ZOOM INTERLOCKING
ROTATION LIMIT
ROTATION LIMIT SETTING
MANUAL SPEED
FLIP*3
BACKLIGHT COMPENSATION*2
Designate the pan and tilt rotation limits.
Sets the pan and tilt rotation limits.
BRIGHTNESS*2
Sets to give operation priority to black &
white mode or slow shutter mode
depending on the subject’s brightness.
DAY AND NIGHT*2 *3
Sets the maximum speed of pan and tilt
operation.
Sets whether to set the tilt rotation range to
90 or over.
Sets Auto Focus mode.
Sets AGC.
AUTO FOCUS
AGC*2
Sets the tilt angle limit.
TILT ANGLE LIMIT
SLOW SHUTTER*2
SHUTTER SPEED*2
ELECTRONIC ZOOM
ENHANCER*2
CHROMA*2
Sets slow shutter.
Sets shutter speed.
Sets functions during maintenance.
MAINTENANCE SETTINGS
Sets a maximum enlargement of
electronic zoom.
Corrects deviation of stepping motor.
Corrects deviation of position.
INITIALIZING
REFLESH
Sets contour enhancement.
Adjusts the chroma.
Sets the password required when activating
maintenance menu screen.
PASSWORD
Improves deviation of preset position.
MOTOR POWER
INITIAL STATUS
AUTOMATIC CORRECTION
DATA BACKUP
Switches sync. system and adjusts phase.
SYNC SYSTEM
INITIALIZING
Returns all setting to initial status set by
the factory.
Return each item on the camera setting
screen to the factory default status.
Automatically corrects deviation of position.
Sets data writing and reading.
Sets motion detection.
Sets automatic operation of Auto-Pan, Preset
sequence, Trace and Tour.
AUTOMATIC OPERATION
Assigns automatic functions to the
Auto key.
MOTION DETECTION*3 *4
PRIVACY MASKING*3
AUTO KEY
Sets privacy masking area.
AUTO PAN
Sets the Auto-Pan operations.
Sets the preset sequence order.
Stores trace movements.
SEQUENCE
TRACE
*1 Setting for this item can be entered by the Main Menu screen not by the Camera Menu screen
when the equipments other than the C-RM500 are connected.
*2 Can also be changed for individual positions at the Camera setting screen for individual positions.
*3 Can be only set for the C-CC564 and C-CC764.
TRACE 1 PAUSETIME
Sets the stop duration of trace movements.
*4 Can be only set when the C-RM500 is connected.
*5 Can be only set for the C-CC564.
Download from Www.Somanuals.com. All Manuals Search And Download.
|