Symphonic TV DVD Combo SC720FDF User Manual

20 inch DVD TRIPLE COMBO

Owner’s Manual

SC720FDF

FEATURES

• Auto Channel Programming

• Timer Recording

1 year 8 events programmable

Daily/Weekly recording

• One Touch Recording

• Auto Clock Setting

• Screen Saver

• Auto Power On and Off

• Parental Lock

• Resume Play (DVD)

• Closed Caption Decoder

• Virtual Surround

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that

all the accessories are included.

Owner's Manual

P Remote Control

P AA batteries x 2

P Owner's Manual

(NF101UD)

(1EMN21534)

INSTRUCCIONES EN ESPAÑOL INCLUDAS

PLEASE READ BEFORE USING THIS EQUIPMENT

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL,

PLEASE CALL TOLL FREE 1-800-242-7158 OR VISIT OUR WEB SITE AT

http://www.Symphonic.us

Download from Www.Somanuals.com. All Manuals Search And Download.

14. Lightning - For added protection for this unit receiver during

a lightning storm, or when it is left unattended and unused

for long periods of time, unplug it from the wall outlet and

disconnect the antenna or cable system. This will prevent

damage to the unit due to lightning and power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other elec-

tric light or power circuits, or where it can fall into such power

lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such

power lines or circuits as contact with them might be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this unit through openings as they may touch dangerous

voltage points or short out parts that could result in a fire or

electric shock. Never spill liquid of any kind on the unit.

18. Servicing - Do not attempt to service this unit yourself as

opening or removing covers may expose you to dangerous

voltage or other hazards. Refer all servicing to qualified ser-

vice personnel.

a. When the power-supply cord or plug is damaged or frayed.

b. If liquid has been spilled, or objects have fallen into the unit.

c. If the unit has been exposed to rain or water.

d. If the unit does not operate normally by following the operat-

ing instructions. Adjust only those controls that are covered

by the operating instructions, as improper adjustment of

other controls may result in damage and will often require

extensive work by a qualified technician to restore the unit to

its normal operation.

e. If the unit has been dropped or damaged in any way.

f. When the unit exhibits a distinct change in performance, this

indicates a need for service.

20. Replacement Parts - When replacement parts are required,

be sure the service technician has used replacement parts

specified by the manufacturer that have the same character-

istics as the original part. Unauthorized substitutions may

result in fire, electric shock, injury to persons or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs to

this unit, ask the service technician to perform routine safety

checks to determine that the unit is in proper operating con-

dition.

22. Heat - This unit product should be situated away from heat

sources such as radiators, heat registers, stoves, or other

products (including amplifiers) that produce heat.

19. Damage Requiring Service - Unplug this unit from the wall

outlet and refer servicing to qualified service personnel

under the following conditions:

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellec-

tual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is

intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to

this equipment may cause harmful interference unless the modifications are expressly approved in the

owner’s manual. The user could lose the authority to operate this equipment if an unauthorized change or

modification is made.

Download from Www.Somanuals.com. All Manuals Search And Download.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER

JUSQU'AU FOND.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guide-

lines for proper grounding and in particular, specifies that the cable ground shall be connected to the grounding system

of the building as close to the point of cable entry as practical.

LOCATION

For safe operation and satisfactory performance of the unit, keep the following in mind when selecting a place

for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the unit near strong magnetic fields.

• Avoid moving unit to locations where temperature differences are extreme.

• Be sure to remove disc and unplug the AC power cord from the outlet before carrying the unit.

TO AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to our

Authorized Service Center for servicing.

• Do not put your fingers or objects into the unit disc loading tray.

• Do not place anything directly on top of the unit.

MOISTURE WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. If you play a videotape or DVD in a moist

unit, it may damage the tape or DVD and the unit. When the condensation occurs inside the unit, turn the

unit on and leave it at least 2 hours to dry out.

NOTE ABOUT RECYCLING

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

Manufactured under license from Dolby Laboratories.

"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.

The serial number of this product may be found on the back of the unit. No other unit has the same serial

number as yours. You should record the number and other vital information here and retain this book as a

permanent record of your purchase to aid identification in case of theft. Serial numbers are not kept on file.

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

Download from Www.Somanuals.com. All Manuals Search And Download.

ABLE OF CONTENTS

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .2

IMPORTANT SAFEGUARDS . . . . . . . . . . . . . . . .2

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . .5

SYMBOLS USED IN THIS MANUAL . . . . . . . . . . . .5

PREPARATION FOR USE . . . . . . . . . . . . . . . . . .6

ANTENNA/CABLE CONNECTIONS . . . . . . . . . . . .6

CONNECTING TO AN EXTERNAL DEVICE (FRONT) . .6

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR) .7

INSTALLING THE BATTERIES IN REMOTE CONTROL .7

OPERATING CONTROLS AND FUNCTIONS . . .8

DVD SECTION

ABOUT THE DISCS . . . . . . . . . . . . . . . . . . . . .22

PLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . . . . .22

UNPLAYABLE DISCS . . . . . . . . . . . . . . . . . . . . . .22

PLAYING A DISC . . . . . . . . . . . . . . . . . . . . . . .23

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .23

DISC MENU / TITLE MENU . . . . . . . . . . . . . . . . . .23

SPECIAL PLAYBACK FUNCTIONS & SETTINGS . . .24

FUNCTION TABLE . . . . . . . . . . . . . . . . . . . . . . . .24

AUDIO MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

SUBTITLE LANGUAGE . . . . . . . . . . . . . . . . . . . . .25

ANGLE MENU . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

BLACK LEVEL MENU . . . . . . . . . . . . . . . . . . . . . .26

V.S.S(Virtual Surround System) . . . . . . . . . . . . . . .26

SEARCH MENU . . . . . . . . . . . . . . . . . . . . . . . . . .26

REPEAT PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .27

PROGRAMMED PLAYBACK . . . . . . . . . . . . . . . . .28

RANDOM PLAYBACK . . . . . . . . . . . . . . . . . . . . . .28

ON-SCREEN INFORMATION . . . . . . . . . . . . . .28

CHANGING THE DVD SET UP ITEMS . . . . . . .29

CUSTOM MENU . . . . . . . . . . . . . . . . . . . . . . . . . .29

INITIALIZE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

TROUBLESHOOTING GUIDE . . . . . . . . . . . . . .32

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .34

APPENDIX . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

CABLE CHANNEL DESIGNATIONS . . . . . . . . . . .35

LANGUAGE CODE LIST . . . . . . . . . . . . . . . . . . . .35

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .36

TV/VCR SECTION

TV OPERATION AND SETTINGS . . . . . . . . . . . .9

WATCHING A TV PROGRAM . . . . . . . . . . . . . . . . .9

SLEEP TIMER / PICTURE CONTROL . . . . . . . . . . .9

CLOCK SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .10

DAYLIGHT-SAVING TIME . . . . . . . . . . . . . . . . . . .11

ON-SCREEN MENU LANGUAGE . . . . . . . . . . . . .11

CLOSED CAPTION SYSTEM . . . . . . . . . . . . . . . .11

V-CHIP SET UP . . . . . . . . . . . . . . . . . . . . . . . . . .12

CHANNEL SET UP . . . . . . . . . . . . . . . . . . . . . . . .13

ON-SCREEN DISPLAY . . . . . . . . . . . . . . . . . . .14

STATUS DISPLAY . . . . . . . . . . . . . . . . . . . . . . . . .14

CHECKING THE STATUS . . . . . . . . . . . . . . . . . . .14

MTS (Multi-channel Television Sound) SYSTEM . .14

VIDEO CASSETTE . . . . . . . . . . . . . . . . . . . . . .15

PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . .15

SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . .16

RENTAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . .16

AUTO REPEAT PLAYBACK . . . . . . . . . . . . . . . . . .16

SEARCH FUNCTION . . . . . . . . . . . . . . . . . . . .16

ZERO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .16

PICTURE SEARCH . . . . . . . . . . . . . . . . . . . . . . . .17

TIME SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . .17

INDEX SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . .17

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .18

NORMAL RECORDING . . . . . . . . . . . . . . . . . . . . .18

OTR (One Touch Recording) . . . . . . . . . . . . . . . . .18

AUTOMATIC TIMER RECORDING . . . . . . . . . . . .19

AUTO RETURN . . . . . . . . . . . . . . . . . . . . . . . . . . .21

AUTO REWIND-EJECT . . . . . . . . . . . . . . . . . . . . .21

COPYING A VIDEO CASSETTE (from another source) .21

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .37

WARRANTY . . . . . . . . . . . . . . . . . .BACK COVER

SYMBOLS USED IN THIS MANUAL

The following symbols below appear in some headings and notes in this manual, with the following meanings.

Description refers to TV/VCR

operation (in the TV/VCR mode).

Description refers to playback of

audio CDs (in the DVD mode).

TV/VCR

Description refers to playback of

DVD video discs (in the DVD mode).

Description refers to the items

to be set by the QUICK mode

(in the DVD mode).

QUICK

Download from Www.Somanuals.com. All Manuals Search And Download.

REPARATION FOR USE

ANTENNA/CABLE CONNECTIONS

Plug the incoming cable into the ANT. jack on the rear of the unit.

If your cable service supplies you with a converter box or if you use a satellite system, connect the box with

this unit as shown below.

Cable

TV signal

Antenna

Rear of the unit

ANT.

COAXIAL

Incoming cable from home

Antenna / Cable Company

(No Cable Box)

ANT.

Cable Box or Satellite Box*

*NOTE

OUT

(DO NOT DISCONNECT FROM BOX)

Some cable TV systems use scrambled

signals and require a special converter to

receive these channels. Consult your local

cable company.

Incoming cable from Cable Company

or Satellite Antenna

NOTE:

Bent pin

For your safety and to

avoid damages to the unit,

unplug the antenna cable

from the ANT. jack before

moving the unit.

Before plugging the antenna into

the ANT. jack of the unit, check

that the pin is not bent. If it is bent,

straighten the pin as illustrated,

then plug the pin into the ANT. jack

of the unit.

Cable

Plug

(Needs to be

straightened)

(Straight pin)

CONNECTING TO AN EXTERNAL DEVICE (FRONT)

When you watch a program recorded on another source (VCR or video camera), use the

AUDIO/VIDEO input jacks on the front of the unit.

AUX

Connect the Audio/Video output jacks of another source to the AUDIO L/R and VIDEO

jacks of this unit.

Then use [SELECT] or [CH. K / L] until "AUX" appears on the screen.

OPEN/

STOP/

EJECT

POWER

PLAY

SELECT

PLAY

VOLUME

SKIP

STOP

CHANNEL

REC/OTR

REW

F.FWD

HEADPHONE

VIDEO

AUDIO

DVD

TV/VCR

ex.

VCR or video

camera, etc.

To the Audio output jacks

Audio Cable (commercially available)

(IN)

(OUT)

HEADPHONE

–

VIDEO

AUDIO

Front of the unit

To the Video output jack

(IN)

Video Cable (commercially available)

NOTE:

When you connect a monaural VCR (another source) to this unit, connect the Audio output jack of the monaural VCR

(another source) to the AUDIO L jack of this unit. The audio will output in both L and R channel equally.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTING TO A DIGITAL AUDIO DEVICE (REAR)

You can connect this unit to a digital audio device to enjoy the digital audio of DVD. Connect to an amplifier

equipped with digital input jacks, such as MD deck or DAT deck. To play a DVD disc in a Dolby Digital Multi-

channel surround format in this unit, connect to a Dolby Digital decoder.

Use an audio coaxial digital cable (commercially available) for the audio connections.

AUDIO OUT

COAXIAL

AUDIO OUT

COAXIAL

To AUDIO OUT

(OUT)

COAXIAL jack

(DVD AUDIO OUT Only )

Dolby Digital

decoder

To Coaxial digital

Audio input jack

(IN)

Audio coaxial digital cable

(commercially available)

MD deck,

DAT deck, etc.

To Coaxial digital

Audio input jack

(IN)

NOTES:

• The audio source on a disc in a Dolby Digital Multi-channel surround format cannot be recorded as digital sound by an

MD or DAT deck.

• Be sure to turn off the power to all devices in the system before connecting another device.

• Refer to the Owner's Manuals for the devices to be connected to the unit.

• To connect to a MD or DAT deck, set "DOLBY DIGITAL" to "PCM" for the audio output in the setup mode, and to con-

nect to a Dolby Digital decoder, set to "BITSTREAM" (Refer to "AUDIO SETTING" on page 30). Playing a unit using

incorrect settings may generate noise distortion and may also damage the speakers.

INSTALLING THE BATTERIES IN REMOTE CONTROL

1) Open the battery compartment cover by pressing

[BATTERY PRECAUTIONS]

the cover on the remote unit in the direction of

the arrow.

2) Insert 2 “AA” penlight batteries into the battery

compartment in the direction indicated by the

polarity (+/-) markings.

Be sure to follow the correct polarity as indicat-

ed in the battery compartment. Reversed batter-

ies may cause damage to the device.

•

Do not mix different types of batteries together

(e.g. Alkaline and Carbon-Zinc) or old batteries

with fresh ones.

3) Replace the cover.

If the device is not to be used for a long period

of time, remove the batteries to prevent damage

or injury from possible battery leakage.

Do not try to recharge batteries not intended to

be recharged; they can overheat and rupture.

Download from Www.Somanuals.com. All Manuals Search And Download.

PERATING CONTROLS AND FUNCTIONS

- FRONT PANEL -

DVD butttons

TV/VCR bbuttons

DVD

TV/VCR

8 9 10 11 1213 14

15 16 17 18 19 20 21

17 Remote sensor window

18 HEADPHONE Jack

- REMOTE CONTROL -

19 VIDEO input Jack [P.6]

20 AUDIO L/R input Jacks [P.6]

21 Cassette compartment

POWER

PICTURE/

REC

SLEEP

SELECT

[REMOTE CONTROL]

CH.

22 POWER Button [TV/VCR P.9 / DVD P.23]

23 PICTURE/SLEEP Button [TV/VCR P.9]

24 Number Buttons [TV/VCR P.9 / DVD P.26]

25 DISPLAY Button [TV/VCR P.14 / DVD P.28]

26 SPEED Button [TV/VCR P.18]

VOL.

DISPLAY

+100

+10

SET-UP

MUTE

SPEED

TV/VCR Audio

27 TV/VCR Audio Button [TV/VCR P14]

28 PLAY B Button [TV/VCR P.15 / DVD P.23]

29 REV E Button [TV/VCR P.15 / DVD P.23]

SKIP H Button [DVD P.26]

30 PAUSE F Button [TV/VCR P.15 / DVD P.23]

31 TITLE Button [DVD P.23]

PLAY

FWD

REV

STOP

SLOW

PAUSE

TITLE

DISC MENU

RETURN

ENTER

CLEAR

MODE

32 CLEAR Button [TV/VCR P.9 / DVD P.26]

33 MODE Button [DVD P.24]

34 REC Button [TV/VCR P18]

35 SELECT Button [TV/VCR P.9]

36 CH.

Buttons [TV/VCR P.9]

[FRONT PANEL]

01 POWER Button [TV/VCR P.9 / DVD P.23]

02 VOLUME

37 VOL.

38 MUTE Button [TV/VCR P.9]

Buttons [P.9]

39 SET-UP Button [TV/VCR P.10 / DVD P.29]

40 FWD D Button [TV/VCR P.15 / DVD P.23]

SKIP G Button [DVD P.26]

41 STOP C Button [TV/VCR P.15 / DVD P.23]

42 DISC MENU Button [DVD P.23]

03 SKIP H / G Buttons [DVD P.26]

SEARCH E / D Buttons [DVD P.23]

04 PLAY B Button [TV/VCR P.15 / DVD P.23]

05 STOP C Button [DVD P.23]

06 OPEN/CLOSE A Button [DVD P.23]

07 Disc loading tray

08 DVD Indicator

09 SELECT Button [TV/VCR P.9]

10 TV/VCR Indicator

11 CHANNEL

12 Recording Indicator

13 REC/OTR Button [TV/VCR P.18]

14 REW E Button [TV/VCR P.15]

15 F.FWD D Button [TV/VCR P.15]

16 STOP/EJECT C /A Button [TV/VCR P.15]

43 ENTER Button [TV/VCR P.10 / DVD P.23]

/{ / B Buttons [TV/VCR P.9 / DVD P.23]

45 RETURN Button [TV/VCR P.10 / DVD P.25]

NOTES:

• We do not recommend the use of universal remote con-

trols as it may not control all the functions. Note that the

code number given by universal remote controls may

not program with this unit. For more details, contact the

manufacturer of the universal remote control.

• Unless stated, all operations described are based on

remote control use. Some operations can be carried

out using the menu bar on the TV screen.

Buttons [TV/VCR P.9]

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

V OPERATION AND SETTINGS

WATCHING A TV PROGRAM

SLEEP TIMER / PICTURE CONTROL

You can set Sleep Timer and picture

adjustment with [PICTURE / SLEEP].

TV/VCR

1 After antenna or cable connection is

completed, connect the power cord into

a standard AC outlet.

TV/VCR

• The menu changes as described below every time

you press [PICTURE / SLEEP].

Sleep Timer

BRIGHT

CONTRAST

COLOR

2 Press [POWER] to turn on the unit.

] or the Number buttons to

3 Use [CH.

SHARPNESS

TINT

select your desired channel number.

To use the number buttons

SLEEP TIMER SETTING

•Single digit channels: (Ex. 02, 03, 04 and so on)

Press [0] first to select a single digit channel.

The Sleep Timer function is used to turn off the

unit without pressing [POWERy] after a desired

time.

•Two digit channels: (Ex. 12, 38, 95 ...)

Press two digits directly.

•Three digit channels: (Ex. 115, 125 ...)

Press [+100] first, then press the last two digits.

1 Press [PICTURE / SLEEP] to

SLEEP 0 MINUTE

display the Sleep Timer menu.

] to adjust the volume.

2 Within 5 seconds, set your desired sleep time

4 Use [VOL.

using [s / B].

Press [MUTE] to instantly

mute the sound. Press it again

to restore the previous sound

level.

VOLUME 20

• [B]...Increase by 30 min. (Up to 120 min.)

• [s]...Decrease by 30 min.

NOTE:

• To cancel the Sleep Timer, use [CLEAR] or [s / B]

• Even if you turn off the unit in the DVD mode, the unit

will be in the TV/VCR mode when you turn it on again.

to set the time to "0".

3 To confirm the remainder time to shutdown,

press [PICTURE / SLEEP].

TO WATCH CABLE OR SATELLITE CHANNEL

If the unit is connected to a cable box or satellite

box, use [CH. K / L] to select CH3 or CH4 accord-

ing to the output channel setting of the device and

select desired channel on that device.

PICTURE CONTROL

1 Press [PICTURE / SLEEP]

BRIGHT

–

P +

repeatedly until desired control

is displayed.

TO WATCH EXTERNAL INPUT

2 Use [s / B] to adjust to your desired level within

When an external equipment is

AUX

5 seconds.

connected to the front AUDIO/

VIDEO input jacks, press

[SELECT] or [CH. K / L] repeat-

edly until "AUX" appears on the

screen.

BRIGHT

to decrease brightness to increase brightness

CONTRAST to decrease contrast to increase contrast

COLOR

TINT

SHARPNESS to soft

to pale

to brilliant

to green

to clear

to purple

NOTE:

• If there is no signal input from the antenna terminal

and no operation for 15 minutes, the unit will turn

itself off automatically.

• Even if any power failure occurs, the unit will

retain its memory for this feature.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

TV OPERATION AND SETTINGS

AUTOMATIC CLOCK SETTING

CLOCK SET UP

NOTES:

Set the unit clock correctly for VCR timer

recording. We suggest that you should

TV/VCR

• If a cable converter box is being used, make sure it is

turned on.

set the clock manually when you first set up the

unit, then set the auto clock setting to "ON" to cor-

rect the time periodically.

• You must use the remote control for the clock setting.

• If the unit is connected directly to a cable converter

box or satellite box, the local PBS station must be

selected on the cable box itself and the unit must be

set to the output channel of the cable converter box

or satellite box (usually channel 3 or 4), to enable to

set up or correct the clock automatically.

NOTE:

• If you cannot receive a station with time signals, auto

clock setting is not available. Use manual setting only.

MANUAL CLOCK SETTING

1 Press [SET-UP].

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

Using [K / L] select "SETTING

In the example below, the clock is to be set to:

CLOCK", then press [ENTER].

DATE:

May 5th, 2006

5:40PM

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

SETTING TIME:

– SETTING CLOCK –

2 Press [ENTER] to select "ON".

INDEX SEARCH

AUTO CLOCK

[ON]

AUTO CLOCK CH SEARCH

1 Press [SET-UP].

Use [K / L] to point to

"SETTING CLOCK", then

press [ENTER].

- TV/VCR SETUP -

AUTO CLOCK CH

[ 02 ]

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

MANUAL CLOCK SET

3 Press [L] to select

– SETTING CLOCK –

AUTO CLOCK

[ON]

ZERO RETURN

TIME SEARCH

"AUTO CLOCK CH SEARCH".

Then press [ENTER].

AUTO CLOCK CH SEARCH

– SETTING CLOCK –

2 Use [K / L] to point to

"MANUAL CLOCK SET", then

press [ENTER].

AUTO CLOCK CH

MANUAL CLOCK SET

D.S.T.

[ 02 ]

AUTO CLOCK

[ON]

• The unit begins searching for

the station which contains the

auto clock set signal. The

search for a signal may take up

to 20 seconds per channel.

AUTO CLOCK CH SEARCH

[OFF]

AUTO CLOCK CH

MANUAL CLOCK SET

D.S.T.

[ 02 ]

• If there is no local PBS station in

your area or on your cable sys-

tem, select "AUTO CLOCK" and press [ENTER]

[OFF]

– AUTO CLOCK CH SEARCH –

to turn "OFF" the function before this step.

• When the search has finished,

"_ _" appears at the lower left of

the screen.

_ _

– MANUAL CLOCK SET –

3 Use [K / L] to set your

desired month, day, year, hour

MONTH DAY

YEAR

NOTES:

0 5

0 5 FRI

2 0 0 6

and minute.

• During AUTO CLOCK CH SEARCH, the picture may

be distorted.

HOUR

0 5

MINUTE

4 0 PM

Use [s / B] to move to

another item.

• If no number appears on the TV screen, there are no

stations in your area which contain the Auto Clock

signal. Auto Clock Setting is not possible. Please use

Manual Clock Setting on this page.

4 Press [SET-UP].

5:40 PM

Although seconds are not

displayed, they begin counting

from 00 when you press

[SET-UP]. Use this feature to

synchronize the clock with the correct time.

4 Write down the numbers that appear on the

screen. They are the auto clock stations in your

area.

5 Press [RETURN] to go back to

NOTE:

"SETTING CLOCK" menu.

– SETTING CLOCK –

• When unplugging the AC cord or if there is a power

failure for more than 3 seconds, you may have to

reset the clock.

AUTO CLOCK

[ON]

Press [ ] to select

AUTO CLOCK CH SEARCH

"AUTO CLOCK CH".

AUTO CLOCK CH

MANUAL CLOCK SET

D.S.T.

[ 08 ]

Use [s / B] until you locate an

auto clock station number.

[OFF]

TO CHANGE CLOCK SETTING

1 Follow steps 1 to 2 above.

6 Press [SET-UP] to exit the menu.

2 Select the item you want to change using [B].

3 Enter correct numbers using [K / L].

4 Press [SET-UP] to start the clock.

NOTE:

• Once the unit is turned off, it will periodically check

and set the correct date and time.

Download from Www.Somanuals.com. All Manuals Search And Download.

DAYLIGHT-SAVING TIME

CLOSED CAPTION SYSTEM

Select this feature and the unit clock will

automatically advance one hour in April,

then reverse one hour in October.

TV/VCR

You can view specially labeled (cc) TV

programs, movies, news and pre-recorded

tapes with either a dialogue caption or text display.

TV/VCR

• First Sunday of April : At 2 AM, the clock imme-

diately changes to 3 AM. Any timer programming

you have set to occur between 2 AM and 3 AM will

be canceled.

- TV/VCR SETUP -

1 Press [SET-UP].

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

Use [K / L] to point to

"CAPTION".

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

• Last Sunday of October : At 2 AM, the clock

immediately changes to 1 AM.

- TV/VCR SETUP -

INDEX SEARCH

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

2 Press [ENTER] repeatedly to

select your desired caption

mode.

LANGUAGE [ENGLISH]

CAPTION [CAPTION1]

ZERO RETURN

1 Press [SET-UP].

- TV/VCR SETUP -

TIMER PROGRAMMING

TIME SEARCH

INDEX SEARCH

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

] to point to

Use [

"SETTING CLOCK", then

press [ENTER].

• CAPTION mode: You can watch dramas, movies and

news while captioning the dialogues and the contents

of news.

TIME SEARCH

INDEX SEARCH

– SETTING CLOCK –

2 Use [K / L] to point to "D.S.T.".

AUTO CLOCK

[ON]

• TEXT mode: You can watch half screen text informa-

AUTO CLOCK CH SEARCH

tion if you want.

AUTO CLOCK CH

MANUAL CLOCK SET

D.S.T.

[ 02 ]

[ON]

*"CAPTION2" is usually used for a second language (if

available).

3 ^Press[SET-UP] to exit the menu.

3 Press [ENTER] to select "ON".

NOTES:

NOTE:

• Even if any power failure, the unit will retain its mem-

ory for this feature.

• To cancel the setting, select "OFF".

• Some programs are not broadcasted with closed

captions. The unit is designed to provide error-free

closed captions with high quality antenna, cable and

VCR signals. Conversely, poor quality signals are

likely to result in caption errors or no captions at all.

4 Press [SET-UP] to exit the menu.

• Common signal conditions which may cause caption

errors are listed below:

ON-SCREEN MENU LANGUAGE

- Electric motor brush noise

You can select the language of on-screen

menu among English, Spanish and French.

TV/VCR

- Weak snowy reception on TV screen

- Multiplex signal reception displaying picture

ghosts or airplane flutte

1 Press [SET-UP].

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

• If the unit displays a black box on

the TV screen, this means that

the unit is set to the TEXT mode.

To clear screen, select "CAP-

TION1", "CAPTION2" or "OFF".

Use [

K / L] to point to

"LANGUAGE".

TIME SEARCH

INDEX SEARCH

2 Press [ENTER] repeatedly to select "ENGLISH",

"ESPAÑOL" or "FRANÇAIS".

TO CANCEL THE CLOSED CAPTION SYSTEM

3 Press [SET-UP] to exit the menu.

1 Press [SET-UP]. Use [K / L] to point to

"CAPTION".

NOTES:

• This function effects only the language on the screen

menu and not the audio source.

2 Press [ENTER] repeatedly to select "OFF".

• If for some reason the menu is already in Spanish or

French, press [SET-UP], using [K / L] point to

"IDIOMA [ESPAÑOL]" or "LANGAGE [FRANÇAIS]",

then press [ENTER] repeatedly to select desired lan-

guage, then press [SET-UP].

3 Press [SET-UP] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

TV OPERATION AND SETTINGS

TV RATING SET UP

V-CHIP SET UP

4 Use [K / L] to select a rating

This feature enables parents to prevent

their children from watching inappropriate

material on TV. When you try to access a blocked

program, “PROTECTED PROGRAM by ...” mes-

sage appears on the TV screen.

TV/VCR

TV–Y

TV–Y7

TV–G

TV–PG (

TV–14

TV–MA(

[VIEW]

that you wish to block.

(

)

Press [ENTER] repeatedly to

set it to "BLOCK" or "VIEW".

(

Selection Rating Category Explanations

TV-Y

NOTE:

Appropriate for all children

Appropriate for children seven and older

General Audience

Parental Guidance suggested

Unsuitable for children under 14

Mature audience only

• To change the rating, the TV

must be turned to an unprotect-

ed program. If the screen on the

right is displayed, change the

channel to a station that is not

protected.

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

PROTECTED PROGRAM

by TV-Y

1 Press [SET-UP].

- TV/VCR SETUP -

NOTES:

TIMER PROGRAMMING

Use [

K / L] to select

• When you select a rating and set

it to "BLOCK", the higher ratings

will be blocked automatically.

The lower ratings will be avail-

able for viewing.

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TV–Y

TV–Y7

TV–G

TV–PG (DLSV)

TV–14 (DLSV)

TV–MA ( LSV)

[VIEW]

"V-CHIP SET UP", then press

[ENTER].

(

)

[VIEW]

[BLOCK]

TIME SEARCH

INDEX SEARCH

2 Use the Number buttons to

ACCESS CODE

• When you set the lowest rating to

"VIEW", all other ratings will be automatically avail-

able for viewing.

enter the access code.

• For the first time set-up or in

the event the unit has lost

power, enter the default code of 0000.

5 The TV-Y7, TV-PG, TV-14 and

TV-MA ratings have the option

TV–Y

TV–Y7

TV–G

TV–PG (

TV–14

TV–MA(

[VIEW]

3 Use [K / L] to select "TV RATING", "MPAA

RATING" or "CHANGE CODE", then press

[ENTER].

(

)

of sub rating categories.

Use [K / L] to select a rating

with sub-ratings, then press

[ENTER] twice.

)

(

Refer to the pages below to set up each item.

– V-CHIP SET UP –

6 Use [K / L] to select a sub-

rating, then press [ENTER] to

set it to "BLOCK" or "VIEW".

P 12

P 13

B TV RATING

MPAA RATING

CHANGE CODE

TV–PG

[BLOCK]

NOTE:

• The blocked sub-ratings will

appear next to the rating cate-

gory in the "TV RATING" menu.

TV–Y

TV–Y7

TV–G

TV–PG (DLSV)

TV–14 (DLSV)

TV–MA ( LSV)

[VIEW]

(

)

[VIEW]

[BLOCK]

Selection Rating Category Explanations

TV-Y7

Fantasy Violence

TV-PG, TV-14, TV-MA

Suggestive Dialog (TV-PG, TV-14 only)

Coarse Language

Sexual Situation

Violence

7 Press [SET-UP] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

MPAA RATING SET UP

CHANGE ACCESS CODE

4 Use [K / L] to point to your

desired item, then press

[ENTER] to select "BLOCK"

or "VIEW".

4 Use the Number buttons to

enter your desired access

code in the "NEW CODE",

then enter the same code in

the "CONFIRM CODE". When

completed, the menu will

[VIEW]

NEW CODE

PG–13

NC–17

[VIEW]

[BLOCK]

X X X X

CONFIRM CODE

Selection Rating Category Explanations

return to "V-CHIP SET UP".

General Audience

PG-13

Parental Guidance suggested.

Unsuitable for children under 13

Restricted; under 17 requires acco-

mpanying parent or adult guardian

No one under 17 admitted

Mature audience only

5 Press [SET-UP] to exit the menu.

NOTE:

• Your personal access code will be erased and will

return to the default (0000) when a power failure

occurs or when you turn off the power using a wall

switch. If you forget the code, unplug the power cord

for 10 seconds to restore the access code to 0000.

NC-17

5 Press [SET-UP] to exit the menu.

CHANNEL SET UP

Channel presetting is necessary at the start or in case you moved the TV to a different area.

TV/VCR

AUTO CHANNEL PROGRAMMING

ADDING/DELETING CHANNELS

1 Press [SET-UP].

You can add channels that was not memorized due

to the bad reception status and also delete chan-

nels you no longer receive or seldom watch.

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

Use [K / L] to point to

"CHANNEL SET UP", then

press [ENTER].

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

1 Press [SET-UP].

TIME SEARCH

INDEX SEARCH

Use [K / L] to point to

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

– CHANNEL SET UP –

2 Use [K / L] to point to "AUTO

CH PROGRAMMING", then

press [ENTER].

"CHANNEL SET UP", then

press [ENTER].

ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

TIME SEARCH

INDEX SEARCH

The tuner scans and memorizes all the active

channels in your area.

– CHANNEL SET UP –

2 Use [K / L] to point to

"ADD/DELETE CH", then

press [ENTER].

ADD / DELETE CH (CATV)

AUTO CH PROGRAMMING

3 When the scanning is comple-

CH 15

ted, the lowest memorized

channel is displayed.

3 Use the Number buttons or

[CH. K / L] to select your

desired channel number.

(You can also use [K / L] to

enter it.)

If "NO TV SIGNALS" appears

on the TV screen, check the

antenna connection and try

again.

ADD / DELETE

NO TV SIGNALS

• Refer to page 9 on how to use

the Number buttons.

(Example: CH8)

NOTES:

• The unit may recognize CATV channels to be TV

channels if reception condition is poor. In this case,

check the antenna connection and try "AUTO CH

PROGRAMMING" again.

4 Press [ENTER] repeatedly. The channel number

changes to red (deleted) or blue (added) every

time you press the button.

• To delete another channel, repeat steps 3 to 4.

• Auto channel programming is NOT necessary

when connected to a cable box or satellite box.

Just select the channel for cable box or satellite

input (ex. CH3 or CH4) on the unit, then select

your desired channel on the cable box or satellite

box.

5 Press [SET-UP] to exit the menu.

NOTE:

• To confirm that channel(s) has been deleted or

added, select it (them) using [CH. K / L].

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

N-SCREEN DISPLAY

STATUS DISPLAY

CHECKING THE STATUS

On screen display examples are shown

below.

While receiving a broadcast or playing a

VHS tape, you can check the status dis-

TV/VCR

played on the screen by pressing [DISPLAY]. You

can also check the status of the preset MTS (Multi-

Channel Television sound). The display will change

as shown below each time you press [DISPLAY].

PLAY

HIFI

12:00AM

CH 123

STEREO/SAP

WHEN THE CLOSED CAPTION IS OFF

COUNT 0:00:00

The display switches among VCR counter and clock.

1. VCR status

Display OFF

COUNTER display

CLOCK display

Displays the current VCR motion:

PLAY / STOP / REC / OTR / PAUSE / FF / REW

STOP

5:40PM

CH2

STOP

2. VCR sound mode status (during playback)

Displays "HIFI" when the tape is recorded in

Hi-Fi stereo mode.

COUNT 0:12:34

After 5 seconds

3. Tape speed (during recording)

5:40PM

CH2

Displays the tape speed: SP / SLP

4. Clock

COUNT 0:12:34

5. Channel number (in TV mode)

Displays the current channel number.

"AUX" is displayed in external input mode.

WHEN THE CLOSED CAPTION IS ON

6. MTS status (in TV mode)

Displays the current sound status of the broad-

cast: STEREO / SAP

The display switches among VCR counter and clock.

Display OFF

CLOCK/COUNTER

display

7. Tape counter (during playback or recording)

Shows the elapsed recording or playback time.

(Not available for a blank tape or blank portions

on the tape.) You can reset the counter by press-

ing [CLEAR].

STOP

5:40PM

CH2

*The display will disappear

after 5 seconds

COUNT 0:12:34

MTS (Multi-channel Television Sound) SYSTEM

MTS allows for reception of sound other than the main audio program. You can listen or record

monaural audio sound, stereo sound or Secondary Audio Program (SAP).

TV/VCR

WHEN RECEIVING AN MTS BROADCAST

WHEN PLAYING CASSETTES

Press [TV/VCR Audio] repeatedly to select a sound

Press [TV/VCR Audio] repeatedly to select "HIFI"

mode when you watch or record a TV program.

or "MONO".

• The mode changes according to

the broadcast among "STEREO",

"SAP" and "MONO" every time

• This setting is saved until the cassette is ejected.

NOTE:

STEREO

• The initial setting is "HIFI". When you play non-HIFI tapes,

the unit will play only in the monaural mode even if the

setting is "HIFI".

you press the button.

NOTES:

• The initial setting is "STEREO". The unit records auto-

matically MTS broadcasts in Hi-Fi stereo sound unless

you select "SAP" beforehand.

(

)

WHEN IN THE EXTERNAL INPUT "AUX" MODE

Any output mode setting does not affect the audio

output and the current audio output mode does not

appear on the TV screen.

• If you select "SAP" when second audio is not available,

the unit will record in normal audio.

• This setting returns to the initial value when you turn off

the unit or unplug the power cord.

Download from Www.Somanuals.com. All Manuals Search And Download.

IDEO CASSETTE

This unit will operate with any cassette that has the

mark. For best results, we recommend the

use of high-quality tapes. Do not use poor quality or

damaged tapes.

ERASE PREVENTION

Break off the tab on the

back edge of the cassette

to prevent accidental eras-

ing of recording.

SELECTING TAPE SPEEDS

Tab

Before recording, select the tape speed from : SP

mode (Standard Play) or SLP mode (Super Long

Play).You can also play a tape recorded in LP mode

(Long Play).

Cover the hole with plastic

tape to record on the tape

again.

Tape Speed

Type of tape

SP mode

Recording/Playback time

T60

T120

T160

1 hour

2 hours 2-2/3 hours

Plastic Tape

SLP mode

3 hours 6 hours 8 hours

NOTES:

• In the TV/VCR mode, if the cassette without tab is insert-

ed, playback will start automatically.

• If you press [REC/OTR] or [REC] when a cassette with-

out tab is inserted, the unit will eject it automatically.

LAYBACK

BASIC PLAYBACK

TRACKING ADJUSTMENT

1 Insert a pre-recorded tape so that the

unit turns on automatically (Auto

Power On).

• Tracking adjustment will be set automatically when

you start playback (Digital tracking function).

TV/VCR

• If noise lines (black and white streaks) appear on

the playback picture, use [CH. K / L] until the

streaks disappear (Manual tracking adjustment).

This is available in Pause/Still/Slow mode, too.

2 Select TV/VCR mode by pressing [SELECT].

• To release manual tracking mode, stop the tape

once and start playback again.

NOTE:

• If the erase-prevention tab has been removed, the

unit will change the VCR mode and starts playback

automatically.

STILL PICTURE

• During playback, press [PAUSE F] to freeze the

picture.

You can advance the picture frame by frame by

pressing [PAUSE F] repeatedly.

3 To start playback,

PLAY

press [PLAY B].

NOTE:

• Even in the DVD mode, you can start the VCR play-

back if you press [PLAY B] on the front panel (of

the TV/VCR side).

• To release the Still mode, press [PLAY B].

SLOW MOTION

STOP

4 To stop the playback,

• During playback, press [PAUSE F] then press

[FWDD].

press [STOP C].

REW

5 To rewind the tape,

• To release the Slow mode, press [PLAY B].

press [REVE].

NOTE:

To forward the tape,

press [FWDD].

To stop winding, press [STOP C].

• If the unit keeps the slow mode or still mode for more

than 5 minutes, it will automatically enter the stop mode.

EJECT

6 To eject the tape from the unit,

press [STOP/EJECT C /A]

on the front panel.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

PECIAL PLAYBACK

RENTAL PLAYBACK

AUTO REPEAT PLAYBACK

This function enables you to improve the

picture quality when playing back worn

cassettes such as rented tapes.

This function allows you to repeat a tape

indefinitely.

TV/VCR

- TV/VCR SETUP -

TIMER PROGRAMMING

1 Press [SET-UP].

Use [K / L] to point to

"USER’S SET UP", then press

[ENTER].

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

1 Press [SET-UP].

- TV/VCR SETUP -

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

Use [K / L] to point to

"USER’S SET UP", then press

[ENTER].

TIME SEARCH

INDEX SEARCH

TIME SEARCH

INDEX SEARCH

2 Use [K / L] to point to "REPEAT PLAY".

USER’S SET UP

–

] to point to

Press [ENTER] repeatedly

2 Use [

USER’S SET UP

–

"RENTAL".

Press [ENTER] to select "ON".

until your desired selection

"ALL" or "BLANK" appears.

RENTAL

REPEAT PLAY

AUTO RETURN

[ON]

[OFF]

RENTAL

REPEAT PLAY

AUTO RETURN

[OFF]

[ALL]

[OFF]

• ALL:

Repeat playback from the

beginning to the end of the tape.

NOTE:

• To cancel the setting, select "OFF" at this step.

• BLANK: Repeat playback from the beginning to a part,

which is blank for more than 10 seconds.

Cancel repeat playback.

3 Press [SET-UP] to exit the menu.

• OFF:

4 Press [PLAY B] to start

RENTAL PLAY

3 Press [SET-UP] to exit the menu.

playback.

NOTE:

REPEAT PLAY

4 Press [PLAY B] to start the

• This setting will not change even if you turn off the

unit.

Repeat Play.

NOTES:

• If the rental mode is set to "ON", “RENTAL PLAY B”

display has priority.

• This setting will not change even if you turn off the

unit.

EARCH FUNCTION

ZERO RETURN

- TV/VCR SETUP -

4 Press [SET-UP].

TIMER PROGRAMMING

This function allows you to search easily

a beginning point that you want to review

by rewinding or fast forwarding.

SETTING CLOCK

CHANNEL SET UP

TV/VCR

Use [K / L] to point to "ZERO

USER’S SET UP

V-CHIP SET UP

RETURN", then press

[ENTER].

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

NOTE:

The unit will begin rewinding

and the counter will appear on the TV screen.

• Zero Return WILL NOT work on a blank tape or a

blank portion of a tape.

The tape will automatically stop when the

counter returns to 0:00:00 (approx.).

1 Rewind or forward the tape to the beginning

point at which you want to review.

2 Press [CLEAR] repeatedly to

COUNT

0:00:00

set the counter to "0:00:00".

3 Press [PLAY B] for playback or [REC] for

recording.

Press [STOP C] when playback or recording is

completed.

Download from Www.Somanuals.com. All Manuals Search And Download.

PICTURE SEARCH

INDEX SEARCH

This function is useful in finding or

skipping over a particular scene on a

tape. In this mode, the sound will be muted.

TV/VCR

This function allows you to index the

starting point to make it easy to reach

TV/VCR

the point in either fast forward or rewind mode.

1 During playback, press [REV E] or [FWD D]

• Every time you start recording, an index is marked

automatically. The index mark also works as the

starting point of Timer recording and OTR.

to view at a high speed (in forward/reverse).

2 Press [REV E] or [FWD D] again to view at

• The index mark will not be recorded if [PAUSE F]

is used during recording.

super high speed (in LP/SLP modes only).

NOTE:

• The time gap between making the index marks on

the tape should be greater than 1 minute for SP

recording, 2 minutes for LP recording and 3 min-

utes for SLP recording.

• Tapes recorded in the SP or LP mode will normally

display a noise bar on the TV screen and the picture

may revert to black and white.

3 Press [PLAY B] to return to normal playback.

• In some cases, the index mark at the beginning of

video tape cannot be detected.

Example: You are watching program number 4 and

want to fast forward to program number

7. Skip three programs.

TIME SEARCH

This function allows you to quickly

advance the tape to your desired posi-

tion simply by entering the exact amount of playback

time you want to skip.

TV/VCR

CURRENT PLAYBACK PROGRAM

Beginning of

the tape

End of

the tape

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5 Pro.6 Pro.7

In the example below: To watch a program before/

after 2 hour 50 minutes from the present position,

in either direction.

INDEX MARK

- TV/VCR SETUP -

1 Press [SET-UP].

TIMER PROGRAMMING

SETTING CLOCK

1 Press [SET-UP].

Use [K / L] to point to

- TV/VCR SETUP -

Use [K / L] to point to "TIME

CHANNEL SET UP

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

USER’S SET UP

V-CHIP SET UP

SEARCH", then press

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

TIME SEARCH

INDEX SEARCH

"INDEX SEARCH", then press

[ENTER].

TIME SEARCH

INDEX SEARCH

2 Use [K / L] until your desired

time appears.

TIME SEARCH

2 : 50

2 Use [K / L] until the number

of programs that you want to

skip appears.

INDEX SEARCH

0 3

To cancel the Time Search at

this point, press [SET-UP].

NOTE:

3 Use [s / B]. The unit begins rewinding or fast

• Time Search can be set up to a maximum of 9 hours

50 minutes (9:50) by 10 minutes at a time.

forwarding to the beginning of desired program.

4 When the search is completed, the unit will start

3 Use [s / B] to rewind or fast forward to the

playback automatically.

specified point.

• The numbers of Index Search can be set up to

20.

• This function is not available during recording.

The time counts down during the search. When

the counter reaches "0:00:00", the tape will start

playback automatically.

TO CANCEL DURING INDEX SEARCH

TO CANCEL DURING TIME SEARCH

Press [STOP/EJECT C /A] on the unit or [STOP C].

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

ECORDING

NOTES:

OTR (One Touch Recording)

• Insert a cassette tape with its erase-prevention tab in place.

• This unit cannot record the contents from the built-in DVD.

• You can ONLY watch the same TV program that is being

recorded.

This function enables you to start record-

ing for specified length simply by press-

ing [REC/OTR] on the unit.

TV/VCR

] or the Number buttons to

1 Use [CH.

NORMAL RECORDING

select the channel to be recorded.

1 Use [CH.

] or the Number

TV/VCR

CH 10

NOTE:

buttons to select the channel to

• If the unit is connected to a cable box or satellite

box, the unit must be on CH3 or CH4. Select the

channel to be recorded on the cable box or satellite

box.

be recorded.

NOTE:

• If the unit is connected to a cable box or satellite

box, the unit must be on CH3 or CH4. Select the

channel to be recorded on the cable box or satellite

box.

2 Press [SPEED] to select the desired tape speed

(SP/SLP).

(Refer to "SELECTING TAPE SPEEDS" on page 15.)

2 Press [SPEED] to select the

OTR (2 : 30)

desired tape speed (SP/ SLP).

3 Press [REC/OTR] on the unit

(Refer to "SELECTING TAPE

SPEEDS" on page 15.)

repeatedly until your desired

length appears on the screen.

The recording time will increase

REC

3 Press [REC] to start recording.

by 30 minutes up to 8 hours.

Recording starts immediately when you press

[REC/OTR].

NOTE:

• If you press [REC/OTR] when "8:00" is displayed,

the unit returns to the normal recording mode.

4 Press [PAUSE F] to tempo-

PAUSE

rarily stop recording unwanted

scenes.

Time(s)

1 time

2 times

3 times

↓

Display

Recording length

(normal recording)

Press [PAUSE F] again or

[REC] to resume recording.

0:30

1:00

↓

30 minutes

60 minutes

↓

NOTE:

• If the recording is paused for more than 5 minutes,

the unit will automatically switch to the recording

mode to prevent tape damage.

17 times

8:00

480 minutes

NOTES:

• Even if you press [POWER] during OTR, the unit

5 Press [STOP C] to stop recording.

continues recording.

• You cannot start OTR with the remote control.

• In the SLP mode, maximum recording time, assum-

ing the tape starts at the beginning, is 8 hours using

T-160 (or 6 hours using T-120).

• If the tape runs out before the end time, the unit will

switch to the stop mode immediately, eject the tape

and turn itself off.

• To show the remaining time of OTR, press [DISPLAY]

on the remote control to display "OTR" on the TV

screen. (It will show up momentarily then disappear.)

TO CANCEL OTR IN PROGRESS

Press [STOP/EJECT C /A] on the unit or [STOP C].

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTOMATIC TIMER RECORDING

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON 7:30^P

- - -/- - - - - -:- -

5 Use [K / L] to set the desired

begin/end hour and minute.

You can set 8 programs to record on

TV/VCR

8:50^PM- -

-:- - - -

specific days, daily or weekly within

1 year period.

Press [B] to move to next item.

– TIMER PROGRAMMING –

CH DATE BEGIN END

61 7/03 MON 7:30^P

- - -/- - - - - -:- -

6 Use [K / L] until the desired

tape speed appears.

In the example below, the timer is being set to record:

8:50^PMSP

-:- - - -

DATE:

July 3rd, 2006

(Refer to "SELECTING TAPE

SPEEDS" on page 15.)

SETTING TIME: from 7:30PM to 8:50PM

CHANNEL:

CH61

7 Press [ENTER] to complete setting.

TAPE SPEED:

• To set another program, repeat steps 2 to 7.

• To correct the program while setting, press [s]

- TV/VCR SETUP -

1 Press [SET-UP].

] to enter

to go back one step and use [

TIMER PROGRAMMING

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

Use [K / L] to select

"TIMER PROGRAMMING",

then press [ENTER].

the correct numbers.

• Press [SET-UP] to exit the menu.

TIME SEARCH

INDEX SEARCH

8 Press [POWER] to set automatic timer recording.

NOTE:

The recording indicator lights up.

• If you have not yet set the clock, "MANUAL CLOCK

SET" menu appears. Set to the present time and

date (refer to "MANUAL CLOCK SETTING" on page

10) then start setting the timer recording.

NOTES:

• You MUST turn off the unit to activate automatic

timer recording.

• If power is not turned off and

you continue watching TV,

– TIMER PROGRAMMING –

2 Use [K / L] to select the

CH DATE

BEGIN END

"TIMER REC STANDBY" starts

desired program position, then

TIMER REC STANDBY

- - -/- - - - - -:- -

-:- -

- -

flashing on the TV screen 2 min-

utes before the programmed

start time.

• Make sure a cassette with erase-prevention tab is

inserted before turning off the unit. If the cassette does

not have the tab, it will be ejected when you press

[POWER] to turn off.

press [B].

-:- - - -

– TIMER PROGRAMMING –

- - -/- - - - - -:- -

-:- - - -

3 Use [

K / L] until the desired

channel number appears, then

CH DATE

BEGIN END

61 -/- - - - - -:- -

- - -/- - - - - -:- -

-:- -

- -

-:- - - -

press [B].

NOTE:

9 At the programmed start time, the unit begins

• If the unit is connected to a cable box or satellite box,

the unit must be on CH3 or CH4. Select the channel

to be recorded on the cable box or satellite box.

recording.

NOTES:

• The recording starts without turning on the TV screen.

4 Set the starting date.

• During recording, you can watch only currently

being recorded TV program or DVD playback.

Press [POWER] and [SELECT] to select the desired

mode.

• If the tape runs out before the end time, the recording

stops immediately and the cassette will be ejected.

– TIMER PROGRAMMING –

CH DATE BEGIN END

For once recording :

Press [ ] until the desired

61 7/03 MON -:- -

- - -/- - - - - -:- -

-:- -

-:- - - -

- -

date appears. Then press [B].

For every day recording :

To record the same channel

at the same time every day.

-–- TI-M/-E-R -P-R-OG-:R- A- MMIN-:G- -–- -

- - -/- - - - - -:- -

-:- - - -

CH DATE

BEGIN END

61 EVRY DAY -:- -

- - -/- - - - - -:- -

-:- - - -

TO CONFIRM THE PROGRAM

Press [L] until "EVRY DAY"

appears, then press [B].

1 Press [POWER] to turn on the unit.

(The Recording indicator turns off.)

For weekly recording :

To record the same channel

at the same time every week.

– TIMER PROGRAMMING –

CH DATE BEGIN END

2 Press [SET-UP].

Use [K / L] to select "TIMER PROGRAMMING",

then press [ENTER].

61 EVRY MON -:- -

- - -/- - - - - -:- -

-:- -

-:- - - -

- -

Press [ ] until "EVRY" and

your desired day of the week

(Ex. Every Monday) appear,

then press [B].

3 Confirm the details of programs that appear on

the TV screen.

4 Press [SET-UP] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

TV/VCR SECTION

RECORDING

ABOUT OVERLAP OF PROGRAMS

TO CORRECT A PROGRAM AFTERWARD

When programs overlap, a program may not be

recorded.

1 Press [POWER] to turn on the unit.

2 Repeat steps 1 to 2 of "AUTOMATIC TIMER

• The program with an earlier start has priority.

• Once the earliest program finishes, the overlapping pro-

grams will begin recording in sequence.

• When the starting time is the same, the program set on

the highest position in the program list has priority.

• The illustration below demonstrates the sequence of

recordings.

RECORDING" on page 19.

3 Press [B] (or press [s] to go back one step)

until the part you want to correct begins flashing,

then use [K / L] to make the changes.

Press [ENTER] to confirm.

4 Press [POWER] to set automatic timer recording.

Recording Sequence

Program 1

10:00AM-11:00AM

Program 2

9:00AM-10:00AM

Program 3

9:30AM-12:00PM

TO CANCEL A PROGRAM

1 Press [POWER] to turn on the unit.

9:00AM

10:00AM

11:00AM

12:00PM

2 If recording is in progress, press

*Recording period is SHADED

[STOP/EJECT C /A] on the unit.

TIMER PROGRAM EXTENSION

3 Press [SET-UP].

Use [K / L] to select "TIMER PROGRAMMING",

then press [ENTER].

You can shift the time schedule of an automatic timer

recording after programming or during recording.

4 Use [K / L] to select a program you want to

1 Press [POWER] to turn on the unit.

cancel and press [CLEAR].

2 Press [SET-UP].

5 Press [SET-UP] to exit the menu.

Use [K / L] to select "TIMER PROGRAMMING",

then press [ENTER].

– TIMER PROGRAMMING –

3 Press [REC] and use

CH DATE

BEGIN END

[K / L] to select the desired

61 7/03 MON 7:30^P

8:50^PMSP

-:- - - -

- - -/- - - - - -:- -

program.

4 Press [REC] repeatedly until your desired

begin/end time appears.

Each press will shift forward the begin/end time

for recording by 10 minutes.

NOTES:

• When the recording is already in progress, each

press will shift forward the end time only.

• If you want to cancel while setting, press [PAUSE F]

on the remote control. The recording time returns to

the original time.

• When you shift forward the time schedule during

recording, the recording speed will be automatically

set to the SLP mode.

5 Press [ENTER] to complete the setting. Then

press [SET-UP] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

AUTO RETURN

This function allows you to automatically

search the beginning of the recorded

program(s) after timer recording finishes.

COPYING A VIDEO CASSETTE

(from another source)

TV/VCR

You can make copies of video tapes for

your enjoyment.

You CANNOT copy a DVD to a videotape.

TV/VCR

- TV/VCR SETUP -

TIMER PROGRAMMING

1 Press [SET-UP].

Use [K / L] to point to

"USER’S SET UP",

then press [ENTER].

SETTING CLOCK

CHANNEL SET UP

USER’S SET UP

V-CHIP SET UP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

WARNING: Unauthorized recordings of copyrighted

video tapes may be an infringement of copyright

laws.

TIME SEARCH

INDEX SEARCH

USER’S SET UP

–

2 Use [K / L] to point to

"AUTO RETURN", then press

[ENTER] to select "ON".

Connect the unit and a source (for playing) device

as shown the following diagram.

RENTAL

REPEAT PLAY

AUTO RETURN

[OFF]

[ON]

[This unit]

3 When all the timer recordings are completed, the

unit will rewind to the beginning of the recorded

program(s) and then turn itself off.

NOTE:

[Ex: Jacks of

source device]

• If you turn off the unit while rewinding the tape, the

AUTO RETURN will stop.

Audio/Video

cables

AUDIO

(not supplied)

OUT

TO CANCEL THE AUTO RETURN MODE

VIDEO

Repeat steps 1 to 2 and press [ENTER] to select

OUT

"OFF".

• Even if any power failure occurs, the unit will

retain its memory for this feature.

1 Insert a pre-recorded video cassette into the

source device (VCR, camcorder, etc.).

2 Insert a video cassette to record into this unit’s

cassette compartment.

3 Press [SPEED] to select the

desired recording speed

(SP/SLP).

AUTO REWIND-EJECT

• When the end of a tape is reached

during recording, playback, or fast-

forward, the tape will automatically rewind to the

beginning. After rewinding finishes, the unit will

eject the tape and turn itself off.

TV/VCR

4 Press [SELECT] until "AUX"

AUX

appears on the screen.

5 Press [REC/OTR] on the unit.

• This function is operative when REPEAT PLAY is

set to "OFF".

6 Begin playback of the tape

in the source device.

• The tape will not auto-rewind during timer record-

ing or One Touch Recording (OTR).

NOTE:

• For best results during copying, use the front panel

controls whenever possible. The remote control might

affect the operation of the source device.

7 To stop copying, press [STOP/EJECT C /A] on

the unit, then stop the playback on the source

device.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

BOUT THE DISCS

PLAYABLE DISCS

Playable

discs

Region Recorded Disc

Mark (logo)

Disc types

code

signals size

DVD-Video

* 1,2,4,6,

10,11

Digital

12 cm

Example

DVD-RW

DVD-R

Title 1

Title 2

video

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

(MPEG2)

8 cm

* 1,3,4,5,

6,7,9,10

DVD+RW

DVD+R

* 1,3,4,5,6,8,9,10

Audio CD

* 4,6,10

Example

12 cm

8 cm

Digital

audio

CD-RW

CD-R

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

* 4,5,6,9,10

is a trademark of DVD Format/Logo Licensing Corporation.

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot

be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc's producers.

*3: Discs recorded in the VR (Video Recording) format cannot be played back.

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the

recorder or special properties of discs.

*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may

not play them back. Even if they are played back, the sound or video quality will be compromised.

*7:You may play back the unfinalized DVD-R/RW disc recorded in the video format on our brand's DVD

recorder. However, depending on the recording status of a disc, the disc may not be played back at all

or normally (the picture or sound may not be smooth, etc.). In this case, you need to finalize the disc

with the DVD recorder. Refer to the manual accompanying the DVD recorder.

*8: Only the discs recorded in the video format and finalized can be played back.

Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not

be played back at all or normally (the picture or sound may not be smooth, etc.).

*9: If there is too much recording space left on a disc (the used portion is less than 55mm across), it may

not play back properly.

*10: Do not glue paper or put stickers on to the disc. These may damage the disc and the unit may not read

it correctly.

*11: The number inside the symbol refers to a region of the world and a disc encoded in a specific region

format can only be played back on unit with the same region code.

UNPLAYABLE DISCS

• NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM / CD-i / Photo CD / Video CD / DVD-Audio / DVD with region codes other than 1 or ALL /

DTS-CD / DVD-ROM for personal computers / CD-ROM for personal computers / MP3

• The sound MAY NOT be heard: Super Audio CD

NOTE:

Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density Super Audio

CD layer cannot be delivered.

• Any other discs without compatibility indications

Download from Www.Somanuals.com. All Manuals Search And Download.

LAYING A DISC

FAST FORWARD / FAST REVERSE

BASIC PLAYBACK

• During playback, press and hold

[FWD D] for fast forward or

[REV E] for fast reverse.

1 Press [POWER] to turn on the

unit.

• Every time you press and hold

the button, playback speeds up

and the level of the speed

appears on the screen.

2 Press [OPEN/CLOSE A] on the unit.

3 Place the disc in the tray, with

the label facing up.

NOTES:

• For DVDs, fast forward/reverse speed is different

depending on the disc. Approximate speed is 1 (×2),

2 (×8), 3 (×20), 4 (×50) and 5 (×100).

4 Press [PLAY B].

• The tray will close automatically and playback will

start. When you play back a DVD which features a

title menu, it may appear on the screen.

• For Audio CDs approximate speed is 1 (×2), 2 (×8)

and 3 (×30).

• When you use buttons on the front panel, use

[SEARCH E / D].

NOTES:

• Closing the disc tray manually or by pressing

[OPEN/CLOSE A] also starts playback.

• To return to normal playback, press [PLAY B].

SLOW FORWARD / SLOW REVERSE

• With DVDs that use titles for play back program sig-

nals, playback may start from the second title or it may

skip these titles.

• During playback, press [PAUSE F].

• Press and hold [FWD D] for slow for-

ward or [REV E] for slow reverse.

5 To freeze the picture, press [PAUSE F] during

playback.

• Every time you press and hold

the button, playback is slowed

down and the level of the speed

appears on the screen.

NOTE:

• The sound will be muted in pause mode.

6 Press [STOP C] to stop

NOTES:

playback temporarily.

Resume ON

• Slow forward / reverse speed varies with the disc.

Approximate speed is 1 (1/16), 2 (1/8) and 3 (1/2).

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

• Press [PLAY B] to resume

the playback.

• To cancel resume and stop the

disc, [STOP C] again.

• When you use buttons on the main unit, use

[SEARCH E / D].

• To return to normal playback, press [PLAY B].

NOTES:

• The resume information stays on even if the unit is

turned off.

• A "prohibited icon" may appear

at the top-right on the TV screen

during operation. This means

DISC MENU / TITLE MENU

DVD may contain menus to navigate the

disc and access special features.

that the operation is not available on the disc.

1 Press [DISC MENU] or [TITLE].

• The DVD main menu / the title menu will appear.

• You can call up the menu even during playback.

STEP BY STEP PLAYBACK

• During playback, press [PAUSE F].

You can advance the picture frame by

frame by pressing [PAUSE F] repeatedly.

2 Use [

s / B] to select an item, and press

[ENTER].

• To return to normal playback, press [PLAY B].

NOTES:

• If disc menu is available on the disc, audio language,

subtitle options, chapters for the title and other

options will appear for selection.

• Contents of menu and corresponding menu opera-

tions may vary between discs. Refer to the manual

accompanying the disc for details.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

PECIAL PLAYBACK FUNCTIONS & SETTINGS

FUNCTION TABLE

Setting menu switches as below every time you press [MODE] during playback.

See the reference page for how to set each menu. Some functions are not available in specific

modes, but this is not a malfunction.

DVD-V

Press [MODE]

AUDIO STREAM 1

...

AUDIO STREAM 8

STEREO

L-ch

R-ch

AUDIO MENU (p25)

V.S.S. MENU (p26)

SEARCH MENU (p26)

REPEAT MENU (p27)

A-B REPEAT MENU (p27)

MENU OFF

OFF

SUBTITLE MENU (p25)

SUBTITLE STREAM 1

....

SUBTITLE STREAM 32

TRACK SEARCH

TIME SEARCH

MARKER SEARCH

ANGLE 1

....

ANGLE 8

ANGLE MENU (p25)

(If available)

OFF

TRACK

ALL

OFF

ZOOM MENU (p25)

ZOOM 1 (×1.3)

ZOOM 2 (×2.0)

ZOOM 3 (×4.0)

OFF

A-

A-B

OFF

BLACK LEVEL MENU (p26)

V.S.S. MENU (p26)

OFF

SEARCH MENU (p26)

CHAPTER SEARCH

TITLE SEARCH

TIME SEARCH

MARKER SEARCH

OFF

CHAPTER

TITLE

REPEAT MENU (p27)

A-B REPEAT MENU (p27)

MENU OFF

OFF

A-

A-B

Download from Www.Somanuals.com. All Manuals Search And Download.

ANGLE MENU

AUDIO MENU

Some DVD discs contain scenes which

have been shot from various angles and

you can change them as you like.

AUDIO LANGUAGE

You can select audio language during DVD playback

(if multi languages are available).

1 During playback, press

1 / 8 (ANGLE)

[MODE] repeatedly until

1.ENG Dolby D 3/2.1ch 48k/3

1 Press [MODE] during playback.

ANGLE menu appears.

2 Use [K / L] to select your desired angle.

] to select your desired language.

2 Use [

3 Press [RETURN] to exit the menu.

NOTES:

• This function may not work on some DVDs with mul-

tiple audio languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

NOTE:

• If multiple angle function is not available, this menu

does not appear on the screen.

• When "NOT AVAILABLE" appears

(

)

NOT AVAILABLE AUDIO

on the TV screen, it means this

function is not available on the

disc.

ZOOM

The Zoom function allows you to enlarge

the video image and to pan through the

enlarged image.

3 Press [RETURN] to exit the menu.

STEREO SOUND MODE

1 During playback, press

OFF (ZOOM)

You can select sound output mode.

[MODE] repeatedly until

ZOOM menu appears.

STEREO (AUDIO)

1 Press [MODE] during

playback.

2 Press [ENTER] repeatedly to select the required

zoom factor.

] to select the sound mode.

2 Use [

OFF

ZOOM1(×1.3) ZOOM2(×2.0) ZOOM3(×4.0)

ZOOM1 ZOOM2 ZOOM3

• STEREO: stereo sound with left and right channels

OFF (ZOOM)

L-ch:

R-ch:

left channel sound only

right channel sound only

3 Press [RETURN] to exit the menu.

] to move the zoomed picture

3 Use [

across the screen.

SUBTITLE LANGUAGE

You can select a language for subtitles

during DVD playback (if available).

4 Press [RETURN] to exit.

• The zoomed position guide

appears on the right corner

of the TV screen in the zoom mode.

1 During playback, press

[MODE] repeatedly until

SUBTITLE menu appears.

1.ENG/6 (SUBTITLE)

NOTES:

• Zooming function does not work while disc menu is shown.

• Zooming function is not available on some discs.

• It may take several seconds to slide the zoomed picture.

• The picture may be distorted if you operate other

functions (ex. pause, fast forward etc.) repeatedly in

the zoom mode.

2 Use [K / L] to select your desired subtitle lan-

guage. To cancel subtitles, select "OFF".

3 Press [RETURN] to exit the menu.

• To cancel the zoom mode, repeat steps 1-2 and

press [ENTER] until "OFF" appears.

NOTES:

• This function may not work on some DVDs with mul-

tiple subtitle languages. In this case, set it on the disc

menu. (Operation varies depending on discs. Refer to

the manual of the disc.)

• If the selected language does not have 3-letter code,

"---" will be displayed on the screen. (Refer to

"LANGUAGE CODE LIST" on page 35.)

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

BLACK LEVEL MENU

SEARCH MENU

You can adjust the Black Level to make the

black parts of the picture brighter.

You can begin playback at a specific track, title,

chapter or from a specific point on a disc.

1 During playback, press

TRACK SEARCH

OFF (BLACK LEVEL)

[MODE] repeatedly until

BLACK LEVEL menu

appears.

1 During playback, press [MODE]

__/12 (SEARCH)

repeatedly until SEARCH

menu appears.

] to select "ON" or "OFF".

2 Use [

2 Within 60 seconds, use the Number buttons to

select the desired track number. Playback will

start from the selected track.

• ON: Makes the dark parts brighter.

OFF: Shows the original picture as recorded.

(Initial setting)

NOTES:

3 Press [RETURN] to exit the menu.

• For single digit press [0] first, if the total track of the

disc is 10 tracks or more.

NOTE:

• During playback or pause, you can also select tracks

by skipping with [H / G] (or [SKIP H / G] on

the front panel), or entering the desired track number

with the Number buttons.

• The setting will be saved even if the unit is turned off.

V.S.S. (Virtual Surround System)

You can enjoy surround-sound effect

over two speakers on this unit.

3 Press [RETURN] to exit the menu.

CHAPTER SEARCH

1 During playback, press

OFF (V.S.S.)

1 During playback, press

__/21 (SEARCH)

[MODE] repeatedly until

V.S.S. menu appears.

SEARCH menu appears.

2 Use [K / L] to select the desired sound effect.

2 Use the Number buttons to enter the desired

chapter number. Playback will start at the selected

chapter.

• 1:

Natural effect

Emphasized effect

OFF: No effect (Initial setting)

• Press [CLEAR] to erase the incorrect input.

• For single digit press [0] first, if the total number of

chapters of the disc is 10 or more.

3 Press [RETURN] to exit the menu.

NOTES:

• When playing back 96kHz with Virtual Surround func-

tion, the sound will be down sampled at 48kHz and

output as digital audio.

3 Press [RETURN] to exit the menu.

TITLE SEARCH

(for CD play only)

1 During playback, press [MODE] repeatedly until

• Virtual Surround System will be effective only when

you set the sound mode to "STEREO". (Refer to

"STEREO SOUND MODE" on page 25.)

SEARCH menu appears.

_/2 (SEARCH)

] to display

2 Use [

TITLE SEARCH menu.

3 Use the Number buttons to enter the desired title

number. Playback will start at the selected title.

• Press [CLEAR] to erase the incorrect input.

• For single digit press [0] first, if the total number of

titles of the disc is 10 or more.

4 Press [RETURN] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

REPEAT PLAYBACK

TIME SEARCH

1 During playback, press [MODE] repeatedly until

REPEAT TRACK

SEARCH menu appears.

1 During playback, press

[MODE] repeatedly until

REPEAT menu appears.

OFF (REPEAT)

TOTAL

0:0 _:_ _

0:04:23

] repeatedly to

2 Use [

display TIME SEARCH menu.

2 Use [K / L] to select your desired repeat mode.

• OFF: Repeat function off

TRACK: Current track repeat

ALL: All track repeat

NOTE:

3 Within 60 seconds, use the Number buttons to

enter a desired disc time. Playback will start at

the specified time.

• Press [CLEAR] to erase the incorrect input.

• When there is no need to enter a number, "0"

appears automatically.

• Repeat Track setting will be cleared when moving to

other track.

4 Press [RETURN] to exit.

3 Press [RETURN] to exit the menu.

MARKER SEARCH

REPEAT TITLE / CHAPTER

You can set markers to memorize your favorite

places on a disc.

1 During playback, press

OFF (REPEAT)

[MODE] repeatedly until

1 During playback, press [MODE] repeatedly until

REPEAT menu appears.

SEARCH menu appears.

2 Use [K / L] to select your desired repeat mode.

2 Use [K / L] repeatedly to

10 AC

• OFF:

Repeat function off

__ __:__:__

display MARKER SEARCH

menu.

CHAPTER: Current chapter repeat

<Example: CD>

TITLE:

Current title repeat

3 Use [s / B] to select a marker number among

NOTES:

1 to 10.

• Repeat Title/Chapter is not available in some scenes.

• The REPEAT setting will be cleared when moving to

other title or chapter.

4 When the track (or title) reaches your desired

point, press [ENTER] to set a marker.

3 Press [RETURN] to exit the menu.

• The track (or title) number and

elapsed playing time will appear

on the TV screen.

00:15:30

REPEAT A-B

OFF (A-B REPEAT)

A- (A-B REPEAT)

A-B (A-B REPEAT)

1 Press [MODE] repeatedly until

5 You can play from the desired point by selecting

the marker number by using [s / B] and then

pressing [ENTER].

A-B REPEAT menu appears.

2 Press [ENTER] at your desired

starting point (A).

6 To clear a marker, select the marker number and

press [CLEAR]. To clear all markers at once,

select "AC" with [s / B] and press [ENTER].

To cancel it, press [CLEAR].

3 Press [ENTER] again at your

desired ending point (B).

NOTE:

The repeat sequence begins.

• The following operation will also erase all markers:

– Opening the disc tray

– Turning off the power

– Pressing [SELECT]

4 To exit the sequence, follow step1 and press

[ENTER] repeatedly until "OFF" appears and

press [RETURN] to exit the menu.

7 Press [RETURN] to exit the menu.

NOTES:

• The A-B repeat section can be set only within the cur-

rent title (for DVDs) or current track (for Audio CDs).

• A-B repeat is not available with some scenes in DVD.

• A-B repeat playback is not available during other

repeat playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

SPECIAL PLAYBACK FUNCTIONS & SETTINGS

PROGRAMMED PLAYBACK

You can determine the playing order of tracks.

5 Press [STOP C] to temporarily stop the playback.

You can resume the playback by pressing

[PLAY B].

1 In the stop mode, press

Press [STOP C] twice to cancel the pro-

grammed playback.

PROGRAM

CD-DA

TOTAL 0:00:00

[MODE].

3:40

4:30

5:00

3:10

5:10

1:30

2:30

• The PROGRAM screen appears.

NOTE:

ENTER

1/4

1/1

PLAY

3:40

CLEAR

• REPEAT setting is available during programmed

playback. (Refer to "REPEAT TRACK" on page 27.)

] to select a track,

2 Use [

PROGRAM

CD-DA

RANDOM PLAYBACK

This function shuffles the playing order of

tracks.

TOTAL 0:14:25

then press [ENTER].

3:40

5:00

4:30

5:00

3:10

5:10

1:30

2:30

10 1:30

12 2:45

1:30

NOTES:

• Up to 99 tracks can be entered.

ENTER

1/4

1/1

PLAY

1:30

CLEAR

• Press [CLEAR] to erase the

most recently entered track.

1 In the stop mode, press

RANDOM

CD-DA

TOTAL 0:45:55

[MODE] twice.

RANDOM PROGRAM

no indication

• If you enter more than 8 tracks, you can change pages

of the program list with [H / G].

• The RANDOM screen appears.

PLAY

• To erase all tracks in the program at once, select "ALL

CLEAR" at the bottom of the track list.

2 Press [PLAY B] to start random playback.

3 Repeat step 2 until you select all the tracks you

want to play in the program.

NOTE:

• REPEAT setting is available during random playback.

(Refer to "REPEAT TRACK" on page 27.)

4 Press [PLAY B] to play the programmed tracks.

3 Press [STOP C] to stop random playback.

N-SCREEN INFORMATION

You can check the information about the current disc by pressing [DISPLAY].

For DVD-Videos

For Audio CDs

1 Press [DISPLAY] during playback to show cur-

rent Chapter.

1 Press [DISPLAY] during playback to show the

current Track.

4/12 0:03:21 - 0:02:15

• The elapsed and remaining

playing time of the current

track will be displayed.

9/49

0:00:00 -0:03:30

playing time of the current

chapter will be displayed.

2 Press [DISPLAY] again to show current Title.

2 Press [DISPLAY] again to show current Total

• The elapsed and remaining

Track.

4/12 0:13:45 - 0:45:40

1/3 0:00:00 - 1:23:45

playing time of the current title

will be displayed.

• The elapsed and remaining

playing time of the total track

will be displayed.

PROGRAM

3 ^Press[DISPLAY] again.

• The bit rate and the current

repeat setting will be displayed.

When in the PROGRAM

mode or RANDOM

mode.

• If you are playing a dual layered disc, the layer

number will also be displayed.

(L0: Layer 0 is playing. L1: Layer 1 is playing).

3 Press [DISPLAY] again to exit.

4 ^Press[DISPLAY] again to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

HANGING THE DVD SET UP ITEMS

You can change the DVD player’s settings by pressing [SET-UP] in DVD mode.

The set up items are shown in the diagram below.

Press [SET-UP] twice

QUICK

CUSTOM

INITIALIZE

AUDIO

SUBTITLE

LANGUAGE (p29)

DISC MENU

TV MODE

STILL MODE

TV MODE

DISPLAY (p30)

AUDIO (p30)

DRC

DOWN SAMPLING

DOLBY DIGITAL

PARENTAL LEVEL

PASSWORD CHANGE

PARENTAL (p30)

OTHERS (p31)

ANGLE ICON

AUTO POWER OFF

CUSTOM MENU

1 In the stop mode, press

[SET-UP] twice to display the

DVD SETUP menu.

SETUP

LANGUAGE SETTING

QUICK

CUSTOM

INITIALIZE

SETUP

LANGUAGE

4 Use [K / L] to select the

desired item, then press

[ENTER].

AUDIO

SUBTITLE

DISC MENU

ORIGINAL

OFF

ENGLISH

NOTES:

• Pressing [SET-UP] once will

show TV/VCR SETUP menu partly.

SET:ENTER

SELECT:

EXIT:SETUP CANCEL:RETURN

• AUDIO:

Sets the audio language.

• If the menu does not appear, press [STOP C] first.

Make sure the unit is in DVD mode before setting.

• SUBTITLE: Sets the subtitle language.

• DISC MENU: Sets the language for DVD menu.

5 Use [K / L] to select your desired language

2 Use [K / L] to select "CUSTOM", then press

from the list, then press [ENTER].

[ENTER].

SETUP

CUSTOM

6 Press [SET-UP] to exit the menu.

3 Use [K / L] to select the

desired item, then press

[ENTER].

LANGUAGE

DISPLAY

AUDIO

PARENTAL

OTHERS

NOTES:

SETUP

LANGUAGE

• If your desired language is not

on the list, select "OTHER" and

enter the code of the language.

(Refer to "LANGUAGE CODE

LIST" on page 35.)

LANGUAGE CODE

Refer to the pages below for

continuation to set up each item.

Please enter a 4-digit language code.

• LANGUAGE setting: P29

• DISPLAY setting:

• AUDIO setting:

• PARENTAL setting: P30

• OTHERS setting: P31

P30

• This feature may not be valid due to default setting

of the disc. In this case, press [MODE] to select the

language. (Refer to "AUDIO MENU" on page 25.)

• If you select a language that is not supported by the

disc, subtitle will be "OFF" automatically and the

default language of the disc will be selected.

• To change the language for the on-screen menus,

call up the TV/VCR SETUP menu by pressing

[SET-UP] once and set the language. (Refer to "ON-

SCREEN MENU LANGUAGE" on page 11.)

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD SECTION

CHANGING THE DVD SET UP ITEMS

DISPLAY SETTING

AUDIO SETTING

4 Use [K / L] to select an item,

SETUP

DISPLAY

Choose the appropriate Audio settings for your

equipment as it only affects during the playback of

DVD discs.

then press [ENTER].

TV MODE

STILL MODE

4:3 LETTER BOX

AUTO

QUICK

• TV MODE:

] to select an item,

4 Use [

SETUP

AUDIO

You can change certain aspects of the DVD display

screens and on-screen messages on the TV screen.

then press [ENTER] repeated-

ly until your desired setting

appears.

DRC

DOWN SAMPLING

DOLBY DIGITAL

BITSTREAM

• 4:3 LETTER BOX (default):

To show black bars on top and

bottom of the screen.

• 4:3 PAN & SCAN:

To show a full height picture with both sides

trimmed.

SETUP

DISPLAY

TV MODE

4:3 LETTER BOX

4:3 PAN & SCAN

• DRC (Dynamic Range Control):

• ON : To compress the range of soft to loud sound.

(default)

• OFF : Output the original sound.

NOTE:

• DOWN SAMPLING:

• ON : Output in 48kHz. (default)

• OFF : Output the original sound.

• You can access this setting directly by selecting

"QUICK" at step 2 on page 29.

• STILL MODE:

This function allows you to adjust picture resolution

and quality in the still mode.

NOTE:

• When playing a disc with copyright protection, the

sound will be output at 48kHz even if the setting is

"OFF".

SETUP

DISPLAY

STILL MODE

AUTO

FIELD

FRAME

• AUTO (default):

Automatically select the best

QUICK

• DOLBY DIGITAL:

• BITSTREAM: Output a Dolby Digital signal.

(default)

resolution setting (FRAME or FIELD) based on

the data characteristics of the pictures.

• FIELD:

Select "FIELD" when the pictures are still unstable

even if "AUTO" is selected. FIELD stabilizes the

pictures, although the picture quality may become

coarse due to the limited amount of data.

• FRAME:

Select "FRAME" to display relatively motionless

pictures in higher resolution. FRAME improves

the picture quality, although it may unstabilize the

pictures due to simultaneous output of two field

data.

• PCM:

Convert the Dolby Digital to PCM.

(2 channel stereo)

NOTES:

• You can access this setting directly by selecting

"QUICK" at step 2 on page 29.

• Set to "BITSTREAM" when the unit is connected to

a Dolby Digital Decoder.

5 Press [SET-UP] to exit the menu.

PARENTAL SETTING

This feature allows you to set the rating level of your

DVD discs. Playback will stop if the disc ratings

exceed the level you set.

PARENTAL LEVEL

4 Enter four-digit password with

SETUP

PARENTAL

PASSWORD

the Number buttons, then

Please enter a 4-digit password.

press [ENTER].

NOTE:

• Enter any 4 digits (except for 4737) to set the pass-

word for the first time, and record it for your memory.

5 Use [K / L] to select

SETUP

PARENTAL

"PARENTAL LEVEL", then

PARENTAL LEVEL

PASSWORD CHANGE

ALL

press [ENTER].

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS SETTING

SETUP

PARENTAL

6 Use [K / L] to select the

desired level, then press

[ENTER].

PARENTAL LEVEL

] to select an item,

4 Use [

SETUP

OTHERS

ALL

8 [ADULT]

7 [NC-17]

6 [R]

ANGLE ICON

AUTO POWER OFF

then press [ENTER] repeated-

ly to set the feature "ON" or

"OFF".

7 Press [SET-UP] to exit the menu.

• ANGLE ICON:

CONTROL LEVELS

• ON: To show the angle icon when multiple

camera angles are available during DVD

playback. (default)

• ALL: All parental locks are canceled.

• 8 [ADULT]: DVD software of any grade

(adult/general/children) can be played back.

• OFF: To keep angle icon from the display.

• 7 to 2: Only DVD software intended for general

use and children can be played back.

• AUTO POWER OFF:

• ON: To activate screen saver program and turn

off the unit automatically. (default)

• 1 [KID SAFE]: Only DVD software intended for

children can be played back, with those intended

for adult and general use prohibited.

• OFF: To deactivate Auto Power Off function.

NOTE:

• The screen saver program starts when there is no

input from the unit for 5 minutes in the stop mode.

After the screen saver program is activated for 15

minutes, the power is automatically turned off.

NOTE:

• With some DVDs, it may be difficult to find if they are

compatible with parental lock. Be sure to check if the

parental lock function operates in the way that you

have set.

5 Press [SET-UP] to exit the menu.

PASSWORD CHANGE

SETUP

PARENTAL

4 Enter current password with

the Number buttons, then

press [ENTER].

PASSWORD

Enter current password.

INITIALIZE

This allows you to return all items of

SETUP

PARENTAL

5 Use [K / L] to select

"PASSWORD CHANGE", then

press [ENTER].

PARENTAL LEVEL

PASSWORD CHANGE

ALL

SETUP menu (except for PARENTAL

setting and menu language) to their default settings.

SETUP

PASSWORD

Please enter a 4-digit password.

PARENTAL

6 Enter four-digit password with

the Number buttons, then

press [ENTER].

1 In the stop mode, press [SET-UP] twice to

display the DVD SETUP menu.

Don't forget the password.

Press 'ENTER' to activate password.

SETUP

2 Use [K / L] to select

QUICK

"INITIALIZE", then press

CUSTOM

7 Press [SET-UP] to exit the menu.

INITIALIZE

[ENTER].

NOTE:

• If you forget the current password, enter 4737 first,

then enter your new password.

The former password will be cleared and parental

level will be set to "ALL" (default).

3 Use [K / L] to select "YES",

SETUP

INITIALIZE

then press [ENTER] twice.

• To cancel the initialization,

select "NO".

Initialize?

YES

4 Press [SET-UP] to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

ROUBLESHOOTING GUIDE

If the unit does not perform properly when operated as instructed in this Owner’s Manual, check the following

guide for the possible remedy of a problem before contacting the Customer Service. Sometimes a perfor-

mance problem can be easily solved by checking seemingly apparent but often overlooked possibilities. It

could save your time and money.

SYMPTOM

No power

POSSIBLE REMEDY

Make sure the power plug is connected to an AC outlet.

(In case of power failure) Check the breaker.

PAGE

•

No operation by remote control

Check if the batteries are weak or inserted incorrectly.

Replace weak batteries and insert with their polarities (+/-

signs) as indicated.

•

Aim the remote control at the remote sensor and operate

within 23 feet (7m) of the unit.

•

Remove all obstacles to clear the path of the infrared signal.

Refer to the infrared signal.

Select the correct mode to operate by pressing [SELECT].

The operable range from the unit is 10 feet (3m) within 15˚.

•

Poor or no picture

Check if antenna or cable is connected properly.

Check for the broken pin or wire of antenna cable.

Check for source of reception disturbance.

•

Press [SELECT] to select the correct mode.

Perform channel scanning to memorize available TV channels.

Try another channel. If OK, then possible station problem.

Adjust picture control (COLOR/CONTRAST/BRIGHT etc.).

Check for magnetism from nearby appliances and try

degaussing.

Poor or no picture in playback

Poor or no sound

Adjust tracking control.

Try video head cleaning.

The videotape may be old or worn. Replace with new one.

•

Adjust volume control using [VOL.

Try another channel. If OK, then possible station problem.

Check if the unit is in Still mode or Slow motion playback.

If so, press [PLAY B] to return to normal playback.

•

Cannot go into recording mode

Make sure the cassette has an erase-prevention tab. If neces-

sary, cover the hole with plastic tape.

•

Timer recording does not work

or results in failure

Make sure the begin/end time is set correctly.

Make sure the power is off to activate timer recording.

Check if the unit’s clock is set to current time and date.

The program may contain copy protection signals that restricts

copying.

•

The timer setting overlapped with another setting has priority.

Check if the tape reached the end during recording.

Check if the power failure during recording.

•

Picture or color fades in and out

when copying a videotape

You cannot copy a copyrighted videotape. You are experienc-

ing copy guard protection.

•

Download from Www.Somanuals.com. All Manuals Search And Download.

SYMPTOM

Misspelling in captions

POSSIBLE REMEDY

PAGE

Error committed by the closed captioning production company.

•

Possible in a live broadcast. Not in case of a prerecorded pro- --

gram.

Text is not shown in its entirety

or a delay occurs from what is

being said

A few seconds of delay is common for live broadcast.

If a dialogue exceeds the display capacity (220 words per

minute), selective editing is used so that the captions remain

up-to-date with the current TV screen dialogue.

•

Captions scrambled with white

boxes

Caused by interferences of building, power lines, thunder-

storms, etc.

•

No captions in a program which The broadcast may use a time compression process to speed --

•

must contain closed caption

up the program. The decoder cannot read the compressed

information and captions will be lost.

No captions in a pre-recorded

videotape with indicated closed

captions included

Possibility of a illegal copy or an erroneous copying process

accidentally performed by the fabricator.

•

Black box in the TV screen

No picture

You are in TEXT mode. Select CAPTION mode or "OFF"

•

This unit cannot play DVD-RAM/CD-i/Photo CD/Video

CD/DVD with region codes other than "1" and "ALL".

Disc cannot be played

No sound

Clean the disc.

Place the disc correctly, with the label side up.

Cancel the parental setting or change the control level.

•

Correct the audio output settings.

Confirm the power and audio settings of external audio com-

ponent.

•

No DTS audio is output

Distorted picture

This unit does not support DTS audio. This is not a malfunc-

tion.

•

During the playback of a 2-layered disc, pictures may stop for --

a moment. This happens while the 1st layer is being switched

to the 2nd layer. This is not a malfunction.

This happens right after fast forwarding or rewinding.

•

Audio or subtitle language does The selected language is not available for audio or subtitle on

•

not match the setting

the DVD.

The camera angle cannot be

changed

The DVD does not contain sequences recorded from different

camera angles.

•

Audio or subtitle language can-

not be changed

The DVD does not contain audio source or subtitles in the

selected language.

"Prohibited icon" appears on the That operation is not available by the unit or the disc.

•

screen

CD/DVD sound dropout

No CD/DVD reproduction

DVD picture poor

Scratched disc. Replace with an unscratched one.

•

NOTES:

• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s

Manual for details on correct operations.

• Playback from a desired track and random playback are not available during playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

AINTENANCE

DEGAUSSING

CABINET CLEANING

A degaussing circuit in this unit clears up color

errors on the TV screen. Color errors occur when

there is any excess magnetism close to the unit.

This circuit is designed to operate once when the

unit is first plugged in. If you see minor color

errors on the screen, unplug the unit for approx-

imately 30 minutes. When you plug the unit again,

the degaussing circuit will operate to clear errors.

Take this step any time the TV screen is accidental-

ly magnetized or when you move the unit.

• Wipe the front panel and other exterior surfaces of

the unit with a soft cloth immersed in lukewarm

water and wrung dry.

• Never use a solvent or alcohol. Do not spray

insecticide liquid near the unit. Such chemicals

may cause damage and discoloration to the

exposed surfaces.

SERVICING

• Should your unit become inoperative, do not try to

correct the problem by yourself. There are no

user-serviceable parts inside. Turn off, unplug the

power cord and please call our help line men-

tioned on the front page, to locate an Authorized

Service Center.

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or

remove a cassette, so you can see a clearer pic-

ture.

• Playback picture may become blurred or interrupt-

ed while the TV program reception is clear. Dirt

accumulated on the video heads after long peri-

ods of use or the usage of rental or worn tapes

can cause this problem.

If a streaky or snowy picture appears during play-

back, the video heads in your unit may need to be

cleaned.

IR SIGNAL CHECK

Use the AM radio or the digital camera to check if

the remote control properly sends out the infrared

signal. It will help to define the cause of malfunction.

Using AM radio

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

• Tune the AM radio to no broadcasting band.

Press any button on remote control toward

the radio. If the radio receives the signal

from remote control properly, the sound will

flutter.

2. If a Video Head Cleaner does not solve the prob-

lem, please call our help line mentioned on the

front page, to locate an Authorized Service

Center.

Using digital camera

(including built-in camera of cellular

NOTES:

phone)

• Press and hold any button on remote control

toward a digital camera. The remote control is

working if you confirm infrared light through the

digital camera.

• Remember to read the instructions included with the

video head cleaner before use.

• Clean video heads only when problems occur.

IF THE LASER OPTICAL PICKUP UNIT IS

DIRTY

DISC HANDLING

• Handle the discs so that fingerprints and dust do

not adhere to the surfaces of the discs.

• If the unit still does not perform properly when it is

operated, while referring to the relevant sections

and to “TROUBLESHOOTING GUIDE” in this

Owner’s Manual, the laser optical pickup unit may

be dirty. Consult your dealer or an Authorized

Service Center for inspection and cleaning of the

laser optical pickup unit.

• Always store the disc in its protective case when it

is not used.

• To clean-off, use a soft cloth.

• Do not use a hard cloth since this

will mar the disc.

• Wipe the disc in a straight line from center to edge.

• Never wipe with a circular motion.

• Do not use detergent or abrasive clean-

ing agents.

Download from Www.Somanuals.com. All Manuals Search And Download.

PPENDIX

CABLE CHANNEL DESIGNATIONS

If you subscribe to cable TV, the channels are displayed as 1-125. Cable companies often designate channels

with letters or letter-number combinations. Please check with your local cable company. The following is a

chart of common cable channel designations.

CATV channel

TV Display

CATV channel

TV Display

CATV channel

TV Display

W+1

W+2

W+3

W+4

W+5

W+6

W+7

W+8

W+9

CATV channel

TV Display

W+10 W+11 W+12 W+13 W+14 W+15 W+16 W+17 W+18 W+19 W+20 W+21 W+22 W+23 W+24

46 47 48 49 50 51 52 53 54 55 56 57 58 59 60

W+25 W+26 W+27 W+28 W+29 W+30 W+31 W+32 W+33 W+34 W+35 W+36 W+37 W+38 W+39

61 62 63 64 65 66 67 68 69 70 71 72 73 74 75

W+40 W+41 W+42 W+43 W+44 W+45 W+46 W+47 W+48 W+49 W+50 W+51 W+52 W+53 W+54

CATV channel

TV Display

CATV channel

TV Display

W+55 W+56 W+57 W+58

91 92 93 94

W+59 W+60 W+61 W+62 W+63 W+64

100 101 102 103 104 105

A-5

A-4

A-3

A-2

A-1

CATV channel

TV Display

CATV channel W+65 W+66 W+67 W+68 W+69 W+70 W+71 W+72 W+73 W+74 W+75 W+76 W+77 W+78 W+79

TV Display

106

W+80 W+81 W+82 W+83 W+84

121 122 123 124 125

107

108

109

110

111

112

113

114

115

116

117

118

119

120

CATV channel

TV Display

LANGUAGE CODE LIST

Language

Code Language

German [GER]

Code

Language

Code Language

Code

A-B

5051

5158

5758

5360

5367

5447

5569

5455

5467

Mongolian

Nauru

Nepali

5960

6047

6051

Somali

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

Chinese [CHI]

Corsican

Croatian

Czech [CZE]

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

F-H

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Spanish [SPA]

Sundanese

Swahili

Norwegian [NOR] 6061

O-R

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Occitan

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish [POL]

6149

6164

6159

6247

6265

5247

6258

Hebrew

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Portuguese [POR] 6266

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

Quechua

6367

Rhaeto-Romance 6459

Irish [IRI]

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

Setswana

Shona

Sindhi

6461

6467

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

6565

6557

6558

U-Z

Kashmiri

Kazakh

Ukrainian

Urdu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

Kinyarwanda

Kirghiz

Kirundi

Korean [KOR]

Kurdish

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

Singhalese

Siswat

Slovak

Slovenian

Faroese

Fiji

Finnish [FIN]

French [FRE]

Frisian

Galician

Georgian

5261

5256

5255

5264

5271

5358

5747

If you choose a language that has a 3 letter language

code, the code will be displayed every time you change

the AUDIO or SUBTITLE language setting. If you

choose any other languages, '---' will be displayed

instead. (3 letter language code is written in bracket.)

Marathi

Moldavian

Download from Www.Somanuals.com. All Manuals Search And Download.

PECIFICATIONS

GENERAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS

Sound output:

2 speakers, 1W, 8 ohm

TV/VCR

CRT:

20 inch in-line gun,

90˚ deflection tube

NTSC-M

§15.119/FCC

Rotary four-head

1/2 inch

OTHER SPECIFICATIONS

Television system:

Closed caption system:

Video Heads:

Terminals

Antenna input:

VHF/UHF/CATV

75 ohm unbalanced

(F-type)

Tape width:

Tape speed

SP:

Video input:

RCA connector × 1

RCA connector × 2

1/8" stereo (3.5 mm)

33.40 mm/sec.

16.67 mm/sec.

11.12 mm/sec.

Audio L/R input:

Headphone:

Coaxial digital

audio output:

LP:

SLP:

Tuner channel

TV VHF Low:

TV VHF High:

TV UHF:

One pin jack,

500 m Vpp (75 ohm)

Digital encoded

infrared light system

5°C to 40°C

(41°F~104°F)

AC 120 V, 60 Hz

90 W

#2~#6

#7~#13

#14~#69

Remote control:

CATV

VHF:

MID band:

SUPER band:

HYPER band:

Operating temperature:

Power requirements:

Power consumption

(Maximum):

A5~A1, A~I

J~W

W+1~W+84

Picture tube:

Dimensions:

20"

H: 20-3/16" (513 mm)

DVD

Product type:

Discs:

W: 22-1/8" (562 mm)

DVD Player

DVD video, Audio CD

NTSC color

D: 19-7/8" (505 mm)

51.1 lbs. (23.2 kg)

Weight:

Output signal format:

• Designs and specifications are subject to change without notice.

• If there is a discrepancy between languages, the default language will be English.

Download from Www.Somanuals.com. All Manuals Search And Download.

NDICE DE CONTENIDO

PREPARATIVOS PARA EL USO . . . . . . . . . . . .37

CONEXIONES DE ANTENA/CABLE . . . . . . . . . . .37

CONEXIÓN A UN DISPOSITIVO EXTERNO

REPRODUCCIÓN . . . . . . . . . . . . . . . . . . . . . . .41

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .41

GRABACIÓN . . . . . . . . . . . . . . . . . . . . . . . . . . .41

GRABACIÓN NORMAL . . . . . . . . . . . . . . . . . . . . .41

GRABACIÓN CON TEMPORIZADOR

(FRONTAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL

(TRASERA) . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

AUTOMÁTICO . . . . . . . . . . . . . . . . . . . . . . . . . .42

SECCIÓN TV/VCR

SECCIÓN DVD

FUNCIONAMIENTO Y AJUSTES DEL

REPRODUCCIÓN BÁSICA . . . . . . . . . . . . . . . . . .43

MENÚ DE DISCO/MENÚ DE TÍTULO . . . . . . . . . .43

TELEVISOR . . . . . . . . . . . . . . . . . . . . . . . . . . .39

PARA VER UN PROGRAMA DE TELEVISIÓN . . . .39

AJUSTE DEL RELOJ . . . . . . . . . . . . . . . . . . . . . .39

AJUSTE DE CANAL . . . . . . . . . . . . . . . . . . . . . . .40

IDIOMA DE MENÚ DE PANTALLA . . . . . . . . . . . . .40

REPARATIVOS PARA EL USO

CONEXIONES DE ANTENA/CABLE

Enchufe el cable entrante en la toma ANT., en la parte trasera de la unidad.

Si su servicio de cable le suministra una caja convertidora o si usted utiliza un sistema de satélite, conecte

la caja con esta unidad, como se indica a continuación.

Antena

Cable

Señal de TV

ANT.

AUDIO OUT

COAXIAL

Parte trasera de la

unidad

Cable entrante desde antena

casera/empresa de cable (sin

caja de cable)

ANT.

Caja de cable o caja de satélite*

*NOTA

(NO DESCONECTAR DE LA CAJA)

Algunos sistemas de TV por cable utilizan

señales cifradas y requieren un convertidor

especial para recibir estos canales.

Cable entrante desde empresa de cable

o antena de satélite

Consulte con su empresa de cable local.

NOTA:

Para su seguridad y

Patilla doblada

Antes de enchufar la antena en la

toma ANT. de la unidad, compruebe

que la patilla no está doblada. Si

está doblada, enderece la patilla

como se indica en la ilustración y

enchufe la patilla a la toma ANT. de

la unidad.

para evitar daños en la

unidad, desenchufe el

cable de la antena de la

toma ANT. antes de

mover la unidad.

Cable

Enchufe

(Debe ser

enderezada)

(Patilla recta)

Download from Www.Somanuals.com. All Manuals Search And Download.

PREPARATIVOS PARA EL USO

CONEXIÓN A UN DISPOSITIVO EXTERNO (FRONTAL)

Cuando vea un programa grabado en otra fuente (videograbadora o videocámara), utilice

las tomas de entrada AUDIO/VIDEO en la parte frontal de la unidad.

Conecte las tomas de salida de Audio/Vídeo de otra fuente a las tomas AUDIO L/R y

VIDEO de esta unidad.

AUX

A continuación, utilice [SELECT] o [CH.

] hasta que aparezca "AUX" en la pantalla.

OPEN/

STOP/

EJECT

POWER

PLAY

SELECT

PLAY

VOLUME

SKIP

STOP

CHANNEL

REC/OTR

REW

F.FWD

HEADPHONE

VIDEO

AUDIO

DVD

TV/VCR

Por ejemplo,

videograbadora o

videocámara, etc.

Parte frontal de

la unidad

A las tomas de salida de audio

(ENTRADA)

Cable de audio

(SALIDA)

HEADPHONE

–

VIDEO

AUDIO

(disponible en el mercado)

A la toma de salida de vídeo

(ENTRADA)

Cable de vídeo (disponible en el mercado)

(SALIDA)

NOTA:

Cuando conecte una videograbadora monoaural (otra fuente) a esta unidad, conecte la toma de salida de audio de la

videograbadora monoaural (otra fuente) a la toma AUDIO L de esta unidad. El sonido saldrá igualmente por ambos

canales L y R (izquierdo y derecho).

CONEXIÓN A UN DISPOSITIVO DE AUDIO DIGITAL (TRASERA)

Puede conectar esta unidad a un dispositivo de audio digital para disfrutar del sonido digital de DVD.

Conecte a un amplificador equipado con tomas de entrada digital, tales como una platina MD o DAT. Para

reproducir un disco DVD en un formato ambiental multicanal Dolby Digital en esta unidad, conéctela a un

decodificador Dolby Digital.

Utilice un cable coaxial digital de audio (disponible en el mercado) para las conexiones de audio.

AUDIO OUT

COAXIAL

AUDIO OUT

COAXIAL

A la toma AUDIO

(SALIDA)

OUT COAXIAL

(Solamente DVD

AUDIO OUT)

Decodificador

Dolby Digital

A la toma de entrada de

audio coaxial digital

(ENTRADA)

Cable de audio coaxial digital

(disponible en el mercado)

Platina MD, plati-

na DAT, etc.

A la toma de entrada de

audio coaxial digital

(ENTRADA)

NOTAS:

• La fuente de audio de un disco en formato ambiental multicanal Dolby Digital no puede ser grabado como sonido digital

por una platina MD o DAT.

• Asegúrese de apagar todos los dispositivos del sistema antes de conectar otro dispositivo.

• Consulte los manuales del usuario de los dispositivos que van a conectarse a la unidad.

• Para conectar a una platina MD o DAT, ajuste "DOLBY DIGITAL" en "PCM" para la salida de audio en el modo de

ajuste, y para conectar a un decodificador Dolby Digital, ajuste en "BITSTREAM" (consulte "AUDIO SETTING en pági-

na 30). Utilizar una unidad con unos ajustes incorrectos puede generar distorsión de ruido y puede asimismo dañar los

altavoces.

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN TV/VCR

UNCIONAMIENTO Y AJUSTES DEL TELEVISOR

PARA VER UN PROGRAMA DE TELEVISIÓN

AJUSTE DEL RELOJ

TV/VCR

Ajuste correctamente el reloj de la

unidad para grabación con temporizador

1 Después de finalizar la conexión de la

antena o del cable, conecte el cable de

alimentación a una toma estándar de

CA.

para videograbadora. Se sugiere ajustar el reloj

manualmente cuando se configure por primera vez

la unidad, y luego fijar el ajuste automático del reloj

en "ON" para corregir la hora periódicamente.

2 Presione [POWER] para encender la unidad.

] o los botones numéricos

3 Utilice [CH.

NOTA:

• Si no pude recibir una emisora con las señales

horarias, el ajuste automático del reloj no estará

disponible. Utilice únicamente el ajuste manual.

para seleccionar el número de canal deseado.

Para utilizar los botones numéricos

•Canales de un dígito: (Ej.: 02, 03, 04, etc.)

Presione primero [0] para seleccionar un canal de un dígito.

AJUSTE MANUAL DEL RELOJ

•Canales de dos dígitos: (Ej.: 12, 38, 95 ...)

Presione dos dígitos directamente.

En el siguiente ejemplo, el reloj está ajustado en:

•Canales de tres dígitos: (Ej. 115, 125 ...)

Presione primero [+100], y luego presione los últimos

dos dígitos.

FECHA:

5 de mayo de 2006

5:40PM

HORA DE AJUSTE:

- TV/VCR PREP. -

COMO PROGRAMAR

AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

LANGUAGE [ENGLISH]

CAPTION [OFF]

ZERO RETURN

1 Presione [SET-UP].

Utilice [K / L] para ir hasta

"AJUSTE RELOJ", y presione

[ENTER].

4 Utilice [VOL. X / Y] para ajustar el volumen.

Presione [MUTE] para

TIME SEARCH

INDEX SEARCH

VOLUMEN 20

silenciar al instante el sonido.

Presione de nuevo para

restaurar el nivel de sonido

anterior.

– AJUSTE RELOJ –

2 Utilice [K / L] para ir hasta

"AJUSTE MANUAL RELOJ", y

presione [ENTER].

RELOJ AUT.

[ON]

BUSQ. AUTO RELOJ CA.

CAN. RELOJ AUT.

[ 02 ]

AJUSTE MANUAL RELOJ

• Si no hay ninguna emisora local

PBS en su zona o en su sistema

de cable, seleccione "RELOJ AUT." y presione

[ENTER] para desactivar la función antes de este

paso.

NOTA:

HORA VER.

[OFF]

• Incluso aunque apague la unidad en el modo DVD,

la unidad estará en el modo TV/VCR cuando vuelva

a encenderse.

PARA VER UN CANAL DE CABLE O SATÉLITE

– AJUSTE MANUAL RELOJ –

3 Utilice [K / L] para ajustar los

Si la unidad está conectada a una caja de cable o de

satélite, utilice [CH. K / L] para seleccionar CA3 o

CA4 según el ajuste de canal de salida del dispositivo

y seleccionar el canal deseado en dicho dispositivo.

datos deseados de mes, día,

año, hora y minuto.

MES

0 5

DIA

AÑO

0 5 VIE

2 0 0 6

HORA

0 5

MINUTO

4 0 PM

Utilice [s / B] para pasar a

otro elemento.

PARA VER UNA ENTRADA EXTERNA

4 Presione [SET-UP].

Cuando un equipo externo esté

AUX

5:40 PM

Aunque los segundos no se

muestran, se comienzan a

contar desde 00 cuando se

presiona [SET-UP]. Utilice esta función para

sincronizar el reloj con la hora correcta.

conectado a las tomas de entrada

frontales AUDIO/VIDEO, presione

[SELECT] o [CH. K / L]

repetidamente hasta que

aparezca "AUX" en la pantalla.

NOTA:

• Cuando desenchufe el cable de CA o si hay un corte

del suministro eléctrico durante más de 3 segundos,

es posible que tenga que reajustar el reloj.

• Si no hay entrada de señal del terminal de antena ni

se hace funcionar durante 15 minutos, el TV se apa-

gará automáticamente.

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN TV

FUNCIONAMIENTO Y AJUSTES DEL TELEVISOR

AJUSTE DE CANAL

IDIOMA DE MENÚ DE PANTALLA

TV/VCR

Es necesario preseleccionar el canal al

principio o en caso de haber movido el

televisor a una zona distinta.

Puede seleccionar el idioma del menú

de pantalla entre inglés, español y

francés.

- TV/VCR PREP. -

COMO PROGRAMAR

AJUSTE RELOJ

1 Presione [SET-UP].

AUTOPROGRAMACIÓN DEL CANAL

Utilice [K / L] para ir hasta

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

TÍTULO [OFF]

1 Presione [SET-UP].

- TV/VCR PREP. -

COMO PROGRAMAR

AJUSTE RELOJ

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

TÍTULO [OFF]

"IDIOMA".

Utilice [K / L] para ir hasta

ZERO RETURN

TIME SEARCH

INDEX SEARCH

"AJUSTE DE CANAL", y

presione [ENTER].

ZERO RETURN

TIME SEARCH

INDEX SEARCH

2 Presione [ENTER] repetidamente para

seleccionar "ENGLISH", "ESPAÑOL" o

"FRANÇAIS".

2 Utilice [K / L] para ir hasta

"AUTOPROGRAMACIÓN DE

CA.", y presione [ENTER].

– AJUSTE DE CANAL –

AGREGAR / BORRAR (CATV)

AUTOPROGRAMACIÓN DE CA.

3 Presione [SET-UP] para salir del menú.

El sintonizador explora y memoriza todos los

canales activos de su zona.

NOTAS:

• Esta función afecta solamente al idioma del menú de

pantalla y no a la fuente de sonido.

3 Cuando la exploración ha

finalizado, se muestra el canal

memorizado más bajo.

CA 15

• Si por alguna razón el menú ya está en inglés o en

francés, presione [SET-UP] y mediante [K / L] vaya

a "LANGUAGE [ENGLISH]" o "LANGAGE

[FRANÇAIS]", y presione [ENTER] repetidamente

para seleccionar el idioma deseado, y presione

[SET-UP].

Si en la pantalla del televisor

aparece "NO HAY SEÑAL DE

TV", compruebe la conexión

de la antena y vuelva a

intentar.

NO HAY SEÑAL DE TV

NOTAS:

• La unidad puede reconocer canales de CATV como

canales de TV si el estado de la recepción es

deficiente. En tal caso, compruebe la conexión de la

antena y vuelva a intentar "AUTOPROGRAMACIÓN

DE CA.".

• La autoprogramación del canal NO es necesaria

cuando está conectado a una caja de cable o de

satélite. Simplemente seleccione el canal para

entrada de caja de cable o de satélite (ej. CA 3 o

CA 4) en la unidad, y seleccione el canal desea-

do en la caja de cable o de satélite.

Download from Www.Somanuals.com. All Manuals Search And Download.

EPRODUCCIÓN

RABACIÓN

NOTAS:

REPRODUCCIÓN BÁSICA

• Inserte una cinta de casete con la lengüeta de protec-

ción contra borrado sin quitar.

TV/VCR

1 Inserte una cinta pregrabada para

encender la unidad

• Esta unidad no puede grabar el contenido del DVD

incorporado.

• SOLAMENTE podrá ver el mismo programa de tele-

visión que se esté grabando.

automáticamente (Auto Power

On/Actividad automática).

2 Seleccione el modo TV/VCR presionando

[SELECT].

GRABACIÓN NORMAL

NOTA:

TV/VCR

CA 10

1 Utilice [CH. K / L] o los

botones numéricos para

seleccionar el canal donde se

va a grabar.

•

Si se ha quitado la lengüeta de protección contra bor-

rado, la unidad cambiará en el modo VCR y empezará

la reproducción automáticamente.

REPRODUCIR

3 Para iniciar la reproducción,

presione [PLAY B].

NOTA:

• Si la unidad está conectada a una caja de cable o

de satélite, deberá estar en CA3 o CA4. Seleccione

en la caja de cable o de satélite el canal donde se

va a grabar.

NOTA:

•

Incluso en el modo DVD, puede iniciar la reproducción

en videograbadora si presiona [PLAY

frontal (del lateral de TV/VCR).

] en el panel

PARAR

Para interrumpir la reproducción,

2 Presione [SPEED] para selec-

presione [STOP

cionar la velocidad de cinta

deseada (SP/SLP). (Consulte

"SELECTING TAPE SPEEDS"

en página 15.)

Para rebobinar la cinta, presione

[REV ].

Para hacer avanzar la cinta, pre-

sione [FWD ].

Para interrumpir el movimiento de

la cinta, presione [STOP ].

REBOBINAR

AV RAPIDO

3 Presione [REC] para iniciar la

GRABAR

grabación.

EXPULSAR

Para expulsar la cinta de la unidad,

presione [STOP/EJECT C /A] en

el panel frontal.

4 Presione [PAUSE F] para

AJUSTE DE SEGUIMIENTO

PAUSA

interrumpir temporalmente la

•

El ajuste de seguimiento se establecerá automáticamente

al iniciar la reproducción (función de seguimiento digital).

Si aparecen líneas de ruido (rayas negras y blancas) en la ima-

grabación de escenas no

deseadas.

Presione [PAUSE F] de

nuevo o [REC] para reanudar

la grabación.

•

gen de reproducción, utilice [CH.

] hasta que las rayas

desaparezcan (ajuste de seguimiento manual). Esto también

está disponible en el modo Pausa/Imagen fija/Cámara lenta.

Para desactivar el modo de seguimiento manual, pare

la cinta una vez e inicie de nuevo la reproducción.

•

NOTA:

• Si la grabación se mantiene en pausa durante más

de 5 minutos, la unidad pasará automáticamente al

modo de grabación para que la cinta no sufra daños.

IMAGEN FIJA

• Durante la reproducción, presione [PAUSE F]

para congelar la imagen.

Puede avanzar la imagen fotograma a fotograma

presionando repetidamente [PAUSE F].

5 Presione [STOP C] para interrumpir la

grabación.

•

Para desactivar el modo de imagen fija, presione [PLAY

CÁMARA LENTA

• Durante la reproducción, presione [PAUSE F] y, a

continuación presione [FWDD ].

Para desactivar el modo de cámara lenta, presione [PLAY

•

NOTA:

•

Si la unidad se mantiene en el modo cámara lenta o imagen fija durante

más de 5 minutos, entrará automáticamente en el modo de parada.

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN TV/VCR

GRABACIÓN

GRABACIÓN CON TEMPORIZADOR AUTOMÁTICO

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 7/03 LUN 7:30^P

- - -/- - - - - -:- -

] para ajustar la hora

Utilice [

y el minuto de inicio/fin deseados.

Presione [ ] para pasar al

siguiente elemento.

8:50^PM- -

-:- - - -

TV/VCR

Puede ajustar ocho programas para grabar en

días concretos, diariamente o semanalmente,

dentro de un periodo de un año.

En el siguiente ejemplo, el temporizador está

ajustado para grabar:

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

61 7/03 LUN 7:30^P8:50^P

Utilice [

] hasta que aparezca la

velocidad de cinta deseada.

(Consulte "SELECTING TAPE SPEEDS"

en página 15.)

- - -/- - - - - -:- -

-:- - - -

FECHA:

3 de julio de 2006

de7:30PM a 8:50PM

CA61

HORA DE AJUSTE:

CANAL:

7 Presione [ENTER] para finalizar el ajuste.

VELOCIDAD DE CINTA: SP

•

Para ajustar otro programa, repita los pasos 2 a 7.

• Para corregir el programa durante el ajuste,

presione [s] para retroceder un paso y utilice

[K / L] para introducir los números correctos.

• Presione [SET-UP] para salir del menú.

- TV/VCR PREP. -

1 Presione [SET-UP].

COMO PROGRAMAR

AJUSTE RELOJ

Utilice [K / L] para seleccionar

"CÓMO PROGRAMAR", y

presione [ENTER].

AJUSTE DE CANAL

AJUSTE DE USER

AJUSTE DE V-CHIP

IDIOMA [ESPAÑOL]

CAPTION [OFF]

ZERO RETURN

8 Presione [POWER] para ajustar la grabación

con temporizador automático.

TIME SEARCH

INDEX SEARCH

NOTA:

El indicador de grabación se enciende.

• Si todavía no ha ajustado el reloj, aparece el menú

"AJUSTE MANUAL RELOJ". Ajuste la hora y la

fecha actuales (consulte "AJUSTE MANUAL DEL

RELOJ" en página 39) e inicie el ajuste de la

grabación con temporizador.

NOTAS:

• DEBE apagar la unidad para activar la grabación

con temporizador automático.

•

Si no se apaga la unidad y sigue

usted viendo la televisión, "PRG.

ESTAR LISTO" empieza a parpadear

en la pantalla del televisor 2 minutos

antes de la hora de inicio programada.

– COMO PROGRAMAR –

2 Utilice [K / L] para seleccionar

PRG. ESTAR LISTO

CA FECHA

INICIO FINAL

la posición del programa

- - -/- - - - - -:- -

-:- -

-:- - - -

- -

deseado y presione [B].

•

Asegúrese de insertar una cinta con lengüeta de

protección contra borrado antes de apagar la unidad.

Si la cinta no tiene la lengüeta, será expulsada

cuando se presione [POWER] para apagar.

- - -/- - - - - -:- -

-:- - - -

– COMO PROGRAMAR –

3 Utilice [K / L] hasta que

aparezca el número del canal

deseado y presione [B].

CA FECHA INICIO FINAL

61 -/- - - - - -:- -

- - -/- - - - - -:- -

-/- - - - - -:- -

-:- -

- -

9 En la hora de inicio programada, la unidad

-:- - - -

NOTA:

•

empieza a grabar.

Si la unidad está conectada a una caja^-d^-e cable o de

NOTAS:

satélite, deberá estar en CA3 o CA4. Seleccione en la

caja de cable o de satélite el canal donde se va a grabar.

• La grabación comienza sin encenderse la pantalla

del televisor.

• Durante la grabación, puede ver solamente el

programa de televisión que se esté grabando

actualmente o una reproducción de DVD.

Presione [POWER] y [SELECT] para seleccionar el

modo deseado.

4 Ajuste la fecha de inicio.

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

Para una única grabación :

Presione [K] hasta que

aparezca la fecha deseada. A

continuación, presione [B].

61 7/03 LUN -:- -

- - -/- - - - - -:- -

-:- -

-:- - - -

- -

•

Si la cinta se acaba antes de la hora de finalización, la grabación

se interrumpe inmediatamente y la cinta es expulsada.

– COMO PROGRAMAR –

Para una grabación cada día

Para grabar el mismo canal a la

misma hora cada día.

CA FECHA INICIO FINAL

PARA CONFIRMAR EL PROGRAMA

61 CADA DIA -:- -

- - -/- - - - - -:- -

-:- - - -

1 Presione [POWER] para encender la unidad.

Presione [ ] hasta que

(El indicador de grabación se apaga.)

aparezca "CADA DIA", y

2 Presione [SET-UP].

presione [B].

Utilice [K / L] para seleccionar "CÓMO

PROGRAMAR", y presione [ENTER].

– COMO PROGRAMAR –

CA FECHA INICIO FINAL

Para una grabación semanal

Para grabar el mismo canal a la

misma hora cada semana.

61 CADA LUN -:- -

- - -/- - - - - -:- -

-:- -

-:- - - -

-:- -

- -

3 Confirme los detalles de los programas que

Presione [ ] hasta que aparezca_-"_-CADA" y su_{- -}

-/- - - - - -:- -

aparecen en la pantalla del televisor.

día deseado de la semana (por ejemplo, "Cada

lunes"), y presione [B].

4 Presione [SET-UP] para salir del menú.

Download from Www.Somanuals.com. All Manuals Search And Download.

SECCIÓN DVD

AVANCE RÁPIDO / RETROCESO RÁPIDO

REPRODUCCIÓN BÁSICA

• Durante la reproducción, mantenga

presionado [FWD D] para avance

rápido o [REV E] para retroceso rápido.

• Cada vez que mantenga

1 Presione [POWER] para

encender la unidad.

2 Presione [OPEN/CLOSE A] en la unidad.

presionado el botón, la

reproducción se acelera y el

nivel de velocidad aparece en la pantalla.

3 Coloque el disco en la

bandeja, con la etiqueta hacia

arriba.

NOTAS:

•

En los discos DVD, la velocidad de avance/retroceso

rápido es diferente según el disco. La velocidad

aproximada es 1 (×2), 2 (×8), 3 (×20), 4 (×50) y 5 (×100).

• En discos de CD de audio la velocidad aproximada

es 1 (×2), 2 (×8) y 3 (×30).

• Cuando utilice los botones del panel frontal, utilice

[SEARCH E / D].

4 Presione [PLAY B].

• La bandeja se cerrará automáticamente y se

empezará la reproducción. Cuando reproduzca un

DVD que incluya un menú de títulos, este menú

puede aparecer en pantalla.

•

Para volver a la reproducción normal, presione [PLAY

NOTAS:

AVANCE LENTO / RETROCESO LENTO

• Cerrar la bandeja del disco manualmente o

presionando [OPEN/CLOSE A] también inicia la

reproducción.

•

Durante la reproducción, presione [PAUSE

• Mantenga presionado [FWD D] para

• Con discos DVD que utilicen títulos para señales de

programa de reproducción, la reproducción puede

comenzar desde el segundo título o puede omitir

dichos títulos.

avance lento o [REV E] para retroceso lento.

• Cada vez que mantenga

presionado el botón, la

reproducción se ralentiza y el

nivel de velocidad aparece en la pantalla.

5 Para congelar la imagen, presione [PAUSE F]

durante la reproducción.

NOTAS:

• La velocidad de avance/retroceso lento varía según

NOTA:

el disco. La velocidad aproximada es 1 (1/16), 2 (1/8)

y 3 (1/2).

• El sonido se silenciará en modo de pausa.

• Cuando utilice los botones de la unidad principal,

utilice [SEARCH E / D].

6 Presione [STOP C] para

REPRISE EN COURS

interrumpir temporalmente la

Appuyez sur 'PLAY' pour commencer

à partir d'ici.

Pour commencer depuis le début,

appuyez d'abord sur 'STOP' puis sur

• Para volver a la reproducción normal, presione

reproducción.

[PLAY B].

'PLAY'.

• Presione [PLAY B] para

reanudar la reproducción.

• Para cancelar la reanudación y parar el disco,

presione [STOP C] de nuevo.

MENÚ DE DISCO/MENÚ DE TÍTULO

Un DVD puede contener menús para explorar

el disco y acceder a funciones especiales.

NOTAS:

• La información de reanudación se conserva aunque

se apague la unidad.

1 Presione [DISC MENU] o [TITLE].

• Puede aparecer un "icono

prohibido" en la zona superior

derecha de la pantalla del

•

Aparecerá el menú principal/menú de título del DVD.

Puede activar el menú incluso durante la reproducción.

televisor durante la operación. Esto significa que la

operación no está disponible en el disco.

] para seleccionar un

2 Utilice [

elemento y presione [ENTER].

REPRODUCCIÓN PASO A PASO

NOTAS:

• SI el disco tiene un menú de disco, aparecerán

distintas opciones de selección: idioma de sonido,

subtítulos, capítulos del título y otras.

• El contenido del menú y las correspondientes

operaciones de menú pueden variar según los

discos. Para más detalles, consulte el manual que

acompaña el disco.

• Durante la reproducción, presione

[PAUSE F].

Puede avanzar la imagen fotograma a

fotograma presionando repetidamente [PAUSE F].

• Para volver a la reproducción normal, presione

[PLAY B].

Download from Www.Somanuals.com. All Manuals Search And Download.

FUNAI CORPORATION

LIMITED WARRANTY

FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS:

FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the

date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this

warranty.

LABOR:

FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE

RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH

THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing

or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product

not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It

does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not

supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,

alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this

product or damage which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS

REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE

PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE

UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS

THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE

UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI

CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:

To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original

packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER.

FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior writ-

ten approval.

To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please

FUNAI CORPORATION

Customer Service

Tel :1-800-242-7158

http://www.Symphonic.us

19900 Van Ness Avenue, Torrance, CA 90501

Printed in Malaysia

1EMN21534

T1203UD★★★★★

Download from Www.Somanuals.com. All Manuals Search And Download.

Sennheiser MP3 Player MX 200 User Manual
Smooth Fitness Treadmill FX20HR User Manual
Sony MP3 Player D EJ1000 User Manual
Sony Portable CD Player CXS 3100 User Manual
Sony Printer DPP FP30 User Manual
StarTechcom Home Theater System POEINJ1GI User Manual
Sunbeam Iron 3056 User Manual
Sunbeam Microwave Oven SBMW709BLS User Manual
Superior Gas Heater VFST 27VSN 2 User Manual
SUPER MICRO Computer Server AS1041M 82 User Manual