FUNAI CORPORATION
LIMITED WARRANTY
Owner’s
Manual
20 INCH
FUNAI CORP. will repair this product, free of charge in CANADA in the event of defect in materials or workmanship as follows:
COLOR TELEVISION
DURATION:
PARTS:
FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of
original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded from this warranty.
FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original
retail purchase.
CWF203
LABOR:
FEATURES
LIMITS AND EXCLUSIONS:
THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE
RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH
THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.
●
Flat Screen Picture Tube
MTS/SAP Tuner
●
●
●
181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.
PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-
ing system provides easy channel selection, and lets you tune directly to any channel using the
channel number buttons (0~9 and +100-key) on the remote control.
On-Screen Function Display.
Full-Function Remote Control
Sleep Timer
Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,
prerecorded tapes, etc. with either a dialogue caption or text display added to the program.
Auto Shut Off Function- If there is no air signal input from the antenna terminal and no
user operation for 15 minutes, the TV will turn itself off automatically.
V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.
This warranty shall not be extended to any other person or transferee.
This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or
if service was attempted by AUTHORIZED SERVICE FACILITY. This FUNAI CORPORATION Limited warranty
does not apply to any the product not purchased and used in CANADA.
●
●
●
●
This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It
does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or product not
supplied by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication,
alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this prod-
uct or damage which results from fire, flood, lightning or other acts of God.
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE
CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.
●
●
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY
GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE
USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL
OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF
FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY, AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTA-
TIVES IN CANADA.
PRECAUTIONS
ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AUTHORIZED SERVICE
FACILITY.
THIS WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AUTHORIZED SERVICE FACILITY.
●
●
●
●
Place your TV in a room with adequate ventilation.
Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.
Do not place your TV on soft surfaces, such as rugs or blankets.
Leave enough room for air to circulate around the bottom, top and back of the set.
THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.
IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS
COSTS WILL BE CHARGED.
ATTENTION:
The serial number of this product may be found on the back of the TV. No others have the same
serial number as yours. You should record the number and other vital information here and retain
this book as a permanent record of your purchase to aid identification in case of theft.
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR
NOTICE.
To locate your nearest AUTHORIZED SERVICE FACILITY or general service procedure, please contact to us:
Date of Purchase
Dealer Purchase from
Dealer Address
Dealer Phone No.
Model No.
Serial No.
FUNAI CORPORATION
Customer Service
100 North Street; Teterboro, NJ 07608 , USA
Tel: 1-800-242-7158
PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.
IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING
AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE
Printed in China
L6510HL * * * * *
0EMN02312
ANTENNA/CABLE CONNECTIONS
*Some cable TV systems use scram-
bled signals and require a special con-
verter to receive these channels.
CAUTION: TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
UHF/VHF Rod
Antenna
(Not supplied)
Consult your local cable company.
VHF
Antenna
(Not supplied)
CATV Box *
or Satellite Box
(Not supplied)
ATTENTION:
POUR ÉVITER LES CHOC
FCC WARNING- This equip-
ment may generate or use radio
frequency energy. Changes or
modifications to this equipment
may cause harmful interference
unless the modifications are
expressly approved in the
instruction manual. The user
could lose the authority to oper-
ate this equipment if an unau-
thorized change or modification
is made.
UHF
Antenna
(Not supplied)
ÉLECTRIQUES, INTRODUIRE
LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE
CORRESPONDANTE DE LA
PRISE ET POUSSER
OUT
IN
From Cable System
or Satellite Antenna
75-ohm
ANT. IN
R
L
VIDEO
INPUT
VIDEO1
–
JUSQU’AU FOND.
Coaxial Cable
75-ohm
Coaxial Cable
ANT. IN
OR
OR
From Cable System
VHF/UHF Combiner
(Not supplied)
Note to CATV system installer:
AV input (stereo)
This reminder is provided to call the CATV system installer's attention to Article
820-40 of the NEC that provides guidelines for proper grounding and, in particu-
lar, specifies that the cable ground shall be connected to the grounding system of
the building as close to the point of cable entry as practical.
VHF/UHF
Combination Antenna
(Not supplied)
CLOSED CAPTION
This TV can receive C1 and C2 Caption and Text.
Notes:
(1)When your TV receives a special effects playback signal (i.e., Search, Slow, Still) from a
VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or
text.
(2)Captions and texts may not match the TV voice exactly.
(3)Interference may cause the closed caption system not to function properly.
(4)The caption or text characters will not be displayed while the menu display or functions dis-
play is shown.
Caption Mode
(1)Closed Caption Characters can be displayed on the TV screen only when the received broad-
cast signal contains Caption Signals.
(2)Paint-on mode: Displays input characters on the screen immediately.
Pop-on mode: Once characters are stored in memory, they are displayed all at once.
Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)
Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters
will not be displayed.
(5)If you see this screen:
Text Mode
(1)Displays the text on the screen by scrolling (max. 7 lines)
(2)If the received broadcast signal does not contain caption or text signals, no change will occur.
If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To
clear screen, select CAPTION C1, C2 or CAPTION [OFF].
Download from Www.Somanuals.com. All Manuals Search And Download.
PREPARATION FOR USE
3) Press the VOL(ume) ▲ button so that "ADD/DELETE" is selected.
4) Use the CH(annel) ▲ or ▼ button to select the channel you wish to put
into memory or to erase from memory.
Note: The display will return to the normal screen automatically in about
10 seconds.
Perform "ADD/DELETE" function while this display appears on the screen.
ADD/DELETE
AUTO MEMO
LANGUAGE SELECTION
If you want to change the language of the on-screen menu, follow the proce-
dure below.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
1) Connect the power cord to a standard AC outlet.
Note: If some digits appear in the corner of the screen,
press the POWER button without unplugging the power cord.
2) Press the POWER button to turn on the TV.
3) Press the MENU button so that the menu display appears
on the TV screen.
4) Press the CH(annel) ▲ or ▼ button to point to "[ENGLISH]".
5) Select "ENGLISH" or "FRANÇAIS" = French by using
the VOL(ume) ▲ or ▼ button.
●
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT BLUE if you wish to add the channel into memory.
●
Press the VOL(ume) ▲ or ▼ button to light up the channel number
in LIGHT RED if you wish to erase the channel from memory.
5) Press the MENU button to exit the menu.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
MTS (Multi-Channel Television Sound) System
You can listen to a program in MTS stereo by following the steps below..
Menu
6) Press the MENU button to exit the menu.
To show the status, press the
DISPLAY button on the remote
control.
CHANNEL PRESETTING
Selection
MAIN
MONO
SAP
Type of
Note:You MUST PRESET channels BEFORE using CHANNEL ▲ or ▼ button.
To preset a channel or to change a preset channel, follow the procedure below.
1) Press the POWER button to turn on the TV.
2) Press the MENU button so that the menu display appears
on the TV screen.
broadcast
-None-
-None-
MONO
MAIN
-None-
Regular
SAP: Second Audio Program,
which means your program, can
also be received in a second lan-
guage or sometimes a radio station.
PICTURE
Stereo
broadcast
STEREO
STEREO
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
MAIN
SAP
SAP
3) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
[To Select STEREO, MONO or SAP in Stereo broadcast]
4) Press the CH(annel) ▲ or ▼ button to point to "AUTO MEMO".
Then, press the VOL(ume) ▲ button.
The tuner scans and memorizes all active channels in your area.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point to "TV SOUND".
3) Press the VOL(ume) ▲ or ▼ button to select your desired stereo mode. ([MAIN], [MONO] or
[SAP])
ADD/DELETE
AUTO MEMO
●
●
●
●
The TV distinguishes between standard TV channels and cable (CATV)
channels.
When AUTO MEMO action is completed, the lowest memorized channel reappears on the
screen.
When you press the CH(annel) ▲ or ▼ button after selecting AUTO MEMO,
the tuner will stop at the memorized channels only.
The TV may memorize TV channels as CATV channels if the reception conditions are poor. If
this happens, try the AUTO MEMO action again when reception conditions are better.
: Press the VOL(ume) ▲ or ▼ button.
PICTURE
PICTURE
CHANNEL SET
PICTURE
CHANNEL SET
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [SAP]
[ENGLISH]FRANÇAIS
[ENGLISH]FRANÇAIS
V-CHIP SET UP
V-CHIP SET UP
CAPTION [OFF]
CAPTION [OFF]
TV SOUND [MAIN]
TV SOUND [MONO]
[ADD/DELETE FUNCTION]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "CHANNEL SET".
Then, press the VOL(ume) ▲ button.
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
RESUME FUNCTION
If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-
ly when the power resumes.
OPERATIONS
WATCHING A TV PROGRAM
PICTURE ADJUSTMENT
1) Press the POWER button to turn on the TV.
2) Select the desired channel with the CH(annel) ▲ or ▼ button.
3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or ▼ button.
1) Press the MENU button so that the menu display appears on the TV screen.
2) Press the VOL(ume) ▲ button so that "PICTURE" is selected.
3) Select the feature you wish to adjust with the CH(annel) ▲ or ▼ button and adjust it with the
VOL(ume) ▲ or ▼ button.
4) Adjust picture controls for a natural looking image. (See "PICTURE ADJUSTMENT".)
●
GAME MODE
Set to the most suitable position for TV
GAME.
In the above steps, the picture adjustment
display will disappear from the TV screen
automatically after about 10 seconds if you
do not press any buttons. Press the MENU
and VOL(ume) ▲ button so that "PIC-
TURE" is selected. Then, press the
CH(annel) ▲ or ▼ button repeatedly until
the display returns to the screen.
If you adjust any Picture control after you
set the Game mode to [ON], the Game mode
is set to [OFF] automatically.
SETTING THE SLEEP TIMER
The sleep timer function allows you to have the power automatically turn off
after a set time period.
1) Press the POWER button to turn on the TV and press the SLEEP button
on the remote control .
[+] : ON
[-] : OFF
BRIGHT
Adjust until the darkest parts of the picture are
as bright as you prefer.
2) You may change the sleep time by pressing the SLEEP
button on the remote control repeatedly. The timer can be
set up to 90 minutes, 10 minutes each time the SLEEP
button is pushed. (The timer display counts up and sleep
timer will be displayed on the screen when you press the
SLEEP button on remote control.)
SLEEP 10
[+] : increase brightness
[-] : decrease brightness
●
To cancel the sleep timer:
Press the SLEEP button repeated-
ly until "SLEEP 0" is displayed.
CONTRAST
Adjust to increase or decrease contrast.
[+] : increase contrast
[-] : decrease contrast
[USING THE GAME BUTTON]
You may also set the Game mode and external
input mode at the same time by pressing the
GAME button on the remote control. "GAME"
appears on the TV screen. In this case, connect
the external source to the AUDIO/VIDEO
jacks on the front panel.
Note: When you disconnect the unit from the AC outlet, or if you have a power failure, the
sleep time will be lost.
COLOR
Adjust to be brilliant or pale color.
[+] : be brilliant color
[-] : be pale color
CLOSED CAPTION SELECTION
You may view specially labeled (cc) TV pro-
grams, movies, news, prerecorded tapes, etc.
with either a dialogue caption or text display
added to the program.
1) Press the MENU button so that the menu
display appears on the TV screen.
2) Press the CH(annel) ▲ or ▼ button to point
to "CAPTION".
TINT
●
To exit the Game mode and external input
Adjust to obtain natural skin tones.
[+] : greenish tone
[-] : reddish tone
mode, press the INPUT SELECT button on
the remote control.
To cancel the Game mode only, adjust the pic-
ture control. In this case, "VIDEO2" instead
of "GAME" appears on the TV screen.
If you press the GAME button when the TV
3) Press the VOL(ume) ▲ or ▼ button to select
the mode you wish.
●
SHARPNESS
4) When done, press the MENU button to exit
the menu.
: Press the VOL(ume) ▲ or ▼ button.
Adjust to detail in the picture.
[+] : increase sharpness
[-] : decrease sharpness
●
PICTURE
PICTURE
PICTURE
PICTURE
PICTURE
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
CHANNEL SET
[ENGLISH]FRANÇAIS
V-CHIP SET UP
CAPTION
TV SOUND [MAIN]
is off, the TV turns on and will be in the
Game mode and external input mode auto-
matically.
Notes:
[
C1]
[
C2]
[
T1]
[
T2]
●
“+” is achieved by pressing the VOL(ume)
▲ button and “-” by pressing the VOL(ume)
▼ button.
: Press the CH(annel) ▲ or ▼ button.
[-]
OFF
[+]
ON
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
[-]
[+]
GAME MODE
BRIGHT
CONTRAST
COLOR
TINT
SHARPNESS
Download from Www.Somanuals.com. All Manuals Search And Download.
[TV RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
3) Press the CH(annel) ▲ or ▼ button to point to "TV RATING". Then,
press the VOL(ume) ▲ button.
V-CHIP SET UP
PICTURE
CHANNEL SET
[ENGLISH] FRANÇAIS
B V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
V-CHIP enables parents to prevent their children from watching inappropriate material on TV.
V-CHIP reads the ratings for programming (except for news and sports programs, unedited
movies on premium cable channels, and Emergency Broadcast System signals), then denies
access to programming if the program's rating meets or exceeds the limitations you select. In this
case, "PROTECTED PROGRAM by ..." message appears on the TV screen.
To block certain ratings, follow the steps below.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
●
Programming may be rated by the Motion Picture Association of America (MPAA) or accord-
ing to the Television Parental Guidelines. In order to block any inappropriate programming, set
your limits in both places (MPAA RATING and TV RATING).
B TV RATING
MPAA RATING
●
You cannot access the menu when the "PROTECTED PROGRAM by ..." message appears. In
this case, change to an unblocked channel, then press the MENU button.
<Selection>
• TV-Y:
• TV-Y7:
<Rating Category Explanations>
Appropriate for all children
Appropriate for children seven and
older
B TV-Y
TV-Y7(
TV-G
TV-PG(
TV-14(
TV-MA(
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
)
[MPAA RATING SET UP]
1) Press the MENU button so that the menu display appears on the TV
screen.
2) Press the CH(annel) ▲ or ▼ button to point to "V-CHIP SET UP".
Then, press the VOL(ume) ▲ button.
• TV-G:
General Audience
• TV-PG:
• TV-14:
• TV-MA:
Parental Guidance suggested.
Unsuitable for children under 14
Mature audience only
)
)
)
PICTURE
CHANNEL SET
[ENGLISH] FRANÇAIS
B V-CHIP SET UP
CAPTION [OFF]
TV SOUND [MAIN]
3) Press the CH(annel) ▲ or ▼ button to point to "MPAA RATING". Then,
press the VOL(ume) ▲ button.
4) Press the CH(annel) ▲ or ▼ button to point to your desired item.
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
●
●
●
When you select the rating category and turn it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.
When you turn "TV-Y" to [BLOCK] or [VIEW], then all ratings will turn to [BLOCK] or
[VIEW] automatically.
TV RATING
B MPAA RATING
When you turn "TV-MA" to [VIEW], then all ratings will turn to [VIEW] automatically.
<Selection>
• G:
• PG:
• PG-13:
• R:
<Rating Category Explanations>
General Audience
Parental Guidance suggested.
Unsuitable for children under 13
Restricted; under 17 requires
accompanying
parent or adult guardian
No one under 17 admitted
Mature audience only
When you select TV-Y7, TV-PG, TV-14, or TV-MA and you press the VOL(ume) ▲ button, the
sub-ratings will appear on the TV screen.
If you select the rating category (example: TV-PG) and turn it to [BLOCK] or [VIEW], the sub-
ratings (example: V for Violence) will turn [BLOCK] or [VIEW] automatically.
You can set the sub-ratings to [BLOCK] or [VIEW] individually when the rating category is set
to [BLOCK]. To set the sub-ratings individually, follow the steps below.
B G
PG
PG-13
R
NC-17
X
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
[VIEW]
• NC-17:
• X:
●
When you select [TV-Y7]:
TV-Y7
B FV
[BLOCK]
[BLOCK]
Press the CH(annel) ▲ or ▼ button to select "FV" (Fantasy Violence).
Then, press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
When you select [TV-PG], [TV-14] or [TV-MA]:
●
●
●
When you select the rating category and turn it to [BLOCK], the higher rating will turn
[BLOCK] automatically. Also, the lower rating will turn [VIEW] automatically.
●
Press the CH(annel) ▲ or ▼ button to select "D" (Suggestive Dialog),
"L"(Coarse Language), "S"(Sexual Situation), or "V" (Violence). Then,
press the VOL(ume) ▲ button to select [BLOCK] or [VIEW].
When you turn "G" to [BLOCK] or [VIEW], the all ratings will turn to [BLOCK] or [VIEW]
automatically.
When you turn "X" to [VIEW], then all ratings will turn to [VIEW] automatically.
TV-PG
B D
L
S
V
[BLOCK]
5) Press the MENU button to exit the menu.
[BLOCK]
[BLOCK]
[BLOCK]
[BLOCK]
Notes:
●
When you select [TV-MA], "D" does not appear on the TV screen.
The sub-ratings which set to [BLOCK] appear next to the rating category
in the TV RATING menu.
●
B TV-Y
TV-Y7(
TV-G
[VIEW]
[VIEW]
[BLOCK]
)
5) Press the MENU button to exit the menu.
TV-PG(DLSV) [BLOCK]
TV-14 (DLSV) [BLOCK]
TV-MA( LSV) [BLOCK]
TROUBLESHOOTING GUIDE
Sometimes a performance problem can be easily solved by checking seemingly apparent but often over-
looked possibilities. Before arranging for service, check these items. It could save you time and money.
MAINTENANCE
CABINET CLEANING
PICTURE TUBE CLEANING
●
Wipe the front panel and other exterior sur-
Wipe the picture tube of the TV with a soft
cloth. Before cleaning the picture tube, discon-
nect the power cord.
faces of the TV with a soft cloth immersed
in lukewarm water and wrung dry.
Never use a solvent or alcohol. Do not spray
●
QUICK SERVICE CHECK LIST
liquid near the TV. Such chemicals may
cause damage and discoloration to the
exposed surfaces.
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
SUPPLIED ACCESSORIES
Is TV plugged in?
Power at outlet?
Owner’s Manual
(0EMN02312)
Remote control unit
(NE122UD or NE151UD)
Owner’s
Manual
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference.
Batteries ("AA" x 2)
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust CONTRAST & BRIGHT control.
Check batteries in Remote Control.
Move the TV away from the nearby appliances or unshielded speakers which
have Magnetism.
SPECIFICATIONS
GENERAL SPECIFICATIONS
Television system:
ELECTRICAL SPECIFICATIONS
Turn off using the POWER button, then turn it on again 30 minutes or so later.
NTSC-M
Sound output:
1W, 8 ohm x2
Closed Caption Problem
Possible Remedy
TV Standard
My TV is showing captions that are
misspelled.
You are watching a live broadcast and spelling errors made by the
closed captioning production company may pass through uncorrect-
ed. A prerecorded program will not show any misspelled words
because of the normal time available for editing the captions.
Closed Caption
System:
OTHER SPECIFICATIONS
Remote control:
§15.119/FCC
Digital encoded
infrared light system
Channel coverage
VHF:
UHF:
2 ~ 13
14 ~ 69
Operating
My TV will not show the text in its entirety Captions that are delayed a few seconds behind the actual dialogue
temperature:
5°C to 40°C
CATV:
2 ~ 13, A ~ W,
W+1 ~ W+84,
A-5 ~ A-1, 5A
181 channel
frequency synthesized
tuning system
Direct access keyboard,
programmable
scan and up/down
or there is a delay of what is being said.
are common for live broadcasts. Most captioning production compa-
nies can display a dialogue to a maximum of 220 words per minute.
If a dialogue exceeds that rate, selective editing is used to insure that
the captions remain up-to-date with the current TV screen dialogue.
(41°F~104°F)
Power requirements: AC120V, 60Hz
Power consumption
Tuning System
Channel access:
(Maximum):
Picture tube:
Dimensions:
75W
20"
My captions are scrambled with white
boxes on the TV screen.
Interference caused by building, power lines, thunderstorms, etc.
may cause scrambled or incomplete captions to appear.
H : 18-5/16" (465mm)
W: 19-15/16" (506mm)
D : 19-13/16" (504mm)
52.9 lbs. (24kg)
My program guide listed a TV show as
being closed captioned
but none of the captions were displayed.
Broadcasters may at times use a time compression process to the
actual program so that additional advertising time can be given.
Since the decoder cannot read the compressed information, captions
will be lost.
Weight:
Terminals
Antenna input:
VHF/UHF/CATV
75 ohm unbalanced
(F-type)
My prerecorded videotape does not show
any captions. The tape box mentions it
being closed captioned.
The videotape was either an illegal copying or the tape duplicating
company accidentally left out the captioning signals during the
copying process.
•Designs and specifications are subject to
change without notice.
•If there is a discrepancy between languages,
the default language will be English.
Video input:
Audio input:
RCA connector x 2
RCA connector x 4
My TV screen shows a black box on certain You are in the TEXT mode. Select CAPTION mode or CAPTION
channels. [OFF].
Stereo Sound System
2 speakers
As an ENERGY STAR® Partner, our company has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency. ENERGY STAR® is a U.S. registered mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
|