Sylvania TV VCR Combo 6727FRE User Manual

Owner’s Manual

6727FRE

SUPPLIED ACCESSORIES

This unit comes with the following accessories. Please confirm that all the accessories

are included.

P Owner's Manual

P Remote Control

P AA batteries x 2

(1EMN20176)

(NE237UD)

NOTE

If any of accessories are missing, please contact your dealer.

Thank you for purchasing this product.

Please make sure to read this manual before using the product and pay par-

ticular attention to the Safety Instructions enclosed within.

When you have finished reading this manual, store it in a safe place for easy

access in the future.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-605-8453 OR VISIT OUR WEB SITE AT http://www.funai-corp.com.

Before you use this unit, you need to complete connections.

Refer to “Connections” on pages 10-13.

To record a program easily, refer to “Easy DVD recording” on pages 46-47

after connections are completed.

(You CANNOT copy any copyright protected DVD disc with this unit.)

INSTRUCCIONES EN ESPAÑOL INCLUDAS.

Download from Www.Somanuals.com. All Manuals Search And Download.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

NEC

NATIONAL ELECTRICAL CODE

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

S2898A

13.Outdoor Antenna grounding - If an outside antenna or

cable system is connected to the TV/VCR/DVD, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect to

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

19.Damage Requiring Service - Unplug this TV/VCR/DVD

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into the

TV/VCR/DVD.

c. If the TV/VCR/DVD has been exposed to rain or water.

d. If the TV/VCR/DVD does not operate normally by follow-

ing the operating instructions. Adjust only those controls

that are covered by the operating instructions, as

improper adjustment of other controls may result in

damage and will often require extensive work by a qual-

ified technician to restore the TV/VCR/DVD to its normal

operation.

14.Lightning - For added protection for this TV/VCR/DVD

receiver during a lightning storm, or when it is left unat-

tended and unused for long periods of time, unplug it from

the wall outlet and disconnect the antenna or cable sys-

tem. This will prevent damage to the TV/VCR/DVD due to

lightning and power-line surges.

e. If the TV/VCR/DVD has been dropped or damaged in

any way.

15.Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touch-

ing such power lines or circuits as contact with them might

be fatal.

f. When the TV/VCR/DVD exhibits a distinct change in

performance-this indicates a need for service.

20.Replacement Parts - When replacement parts are

required, be sure the service technician uses replacement

parts specified by the manufacturer that have the same

characteristics as the original part. Unauthorized substitu-

tions may result in fire, electric shock, injury to persons or

other hazards.

16.Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17.Object and Liquid Entry - Never push objects of any kind

into this TV/VCR/DVD through openings as they may

touch dangerous voltage points or short out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the TV/VCR/DVD.

21.Safety Check - Upon completion of any service or repairs

to this TV/VCR/DVD, ask the service technician to perform

routine safety checks to determine that the TV/VCR/DVD

is in proper operating condition.

22.Heat - This TV/VCR/DVD product should be situated away

from heat sources such as radiators, heat registers,

stoves, or other products (including amplifiers) that pro-

duce heat.

18.Servicing - Do not attempt to service this TV/VCR/DVD

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

Download from Www.Somanuals.com. All Manuals Search And Download.

RECAUTIONS

IMPORTANT COPYRIGHT INFORMATION

Unauthorized copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by method claims of certain U.S.

patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use

of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for

home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse

engineering or disassembly is prohibited.

RADIO-TV INTERFERENCE

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-

ence in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the instructions, may cause harmful interference to radio commu-

nications. However, there is no guarantee that interference will not occur in a particular installation. If this equip-

ment does cause harmful interference to radio or television reception, which can be determined by turning the

equipment off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

1) Reorient or relocate the receiving antenna.

2) Increase the separation between the equipment and receiver.

3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4) Consult the dealer or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Este aparato digital de la Clase B cumple con la norma ICES-003 de Canadá.

FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equip-

ment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user

could lose the authority to operate this equipment if an unauthorized change or modification is made.

LASER SAFETY

This unit employs a laser. Only a qualified service person should remove the cover or attempt to service

this device, due to possible eye injury.

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER

THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED.

DO NOT STARE INTO BEAM.

LOCATION: INSIDE, NEAR THE DECK MECHANISM.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY

INSERT.

ATTENTION: POUR ÉVITER LES CHOC ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE

LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

LOCATION

For safe operation and satisfactory performance of your TV/VCR/DVD, keep the following in mind when

selecting a place for its installation:

• Shield it from direct sunlight and keep it away from sources of intense heat.

• Avoid dusty or humid places.

• Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes at the

top and bottom of the unit. Do not place the unit on a carpet because this will block the ventilation holes.

• Install unit in a horizontal position.

• Avoid locations subject to strong vibration.

• Do not place the TV/VCR/DVD near strong magnetic fields.

• Avoid moving TV/VCR/DVD to locations where temperature differences are extreme.

Download from Www.Somanuals.com. All Manuals Search And Download.

AVOID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it from an AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on your unit, unplug the power cord immediately and take the unit to a

Authorized Service Center for servicing.

• Do not put your fingers or objects into the TV/VCR/DVD disc loading tray or the cassette compartment.

• Do not place anything directly on top of the unit.

MOISTURE CONDENSATION WARNING

• Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place, or

after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until

its inside gets dry.

REGARDING THIS MANUAL

• Product and company names appearing within this manual are trademarks or registered trademarks of their

respective owners.

• Although special care has been taken to ensure that all information contained within this manual is correct

at time of writing, the information is subject to change without notice.

• Make sure to read the manual carefully and follow all instructions contained within. We will not be held

responsible for any damages caused by improper use or handling of this product.

• Reproducing this manual by any means, in whole or in part, is prohibited.

A NOTE ABOUT RECYCLING

This product's packaging materials are recyclable and can be reused. Please dispose of any materials in

accordance with your local recycling regulations.

Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula-

tions concerning chemical wastes.

The serial number of this product may be found on the back of this unit. No other TV/VCR/DVD has the same

serial number as yours. You should record the number and other vital information here and retain this book

as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase

Dealer

Dealer Phone No.

Model No.

Dealer Address

Serial No.

YMBOLS USED IN THIS MANUAL

The following is the description for the symbols used in this manual.

DVD-V

MP3

VCR

: Refers to DVD video discs.

: Refers to DVD-RW in Video mode.

: Refers to DVD-RW in VR mode.

: Refers to DVD-R discs.

: Refers to CD-R/RW discs with MP3

files.

DVD-RW (Video)

DVD-RW (VR)

DVD-R

: Refers to VHS tapes. Use only cas-

settes marked

: Refers to Audio CDs.

Download from Www.Somanuals.com. All Manuals Search And Download.

ONTENTS

Repeat/Random/Program Play . . . . . . . . . . . . . . . .40

Repeat Play. . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Random Play. . . . . . . . . . . . . . . . . . . . . . . . . . 40

Program Play. . . . . . . . . . . . . . . . . . . . . . . . . . 41

Selecting AUDIO / VIDEO Menu . . . . . . . . . . . . . .41

Switching Audio Soundtrack. . . . . . . . . . . . . . . 41

Switching Subtitles . . . . . . . . . . . . . . . . . . . . . 43

Switching Camera Angles . . . . . . . . . . . . . . . . 43

Reducing Block Noise . . . . . . . . . . . . . . . . . . . 44

Virtual Surround Setting. . . . . . . . . . . . . . . . . . 44

GUIDE TO DISPLAYS ON SCREEN MENU . . . .45

EASY DVD RECORDING . . . . . . . . . . . . . . . . .46

RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . .48

About DVD Recording . . . . . . . . . . . . . . . . . . . . . .48

Video mode/VR (Video Recording) mode. . . . . 48

Recording Speed . . . . . . . . . . . . . . . . . . . . . . 48

Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Copy Control . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Formatting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Format Setting. . . . . . . . . . . . . . . . . . . . . . . . . 49

Reformatting . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Basic Recording . . . . . . . . . . . . . . . . . . . . . . . . . .51

Recording TV Programs. . . . . . . . . . . . . . . . . . 51

Checking the recording picture quality . . . . . . . 52

One-Touch Timer Recording . . . . . . . . . . . . . . . . .53

Finalizing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Protecting Discs . . . . . . . . . . . . . . . . . . . . . . . . . .55

Connecting to External Video Products . . . . . . . . .56

Connections . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Recording from External Video Products . . . . . 56

DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

TIMER RECORDING . . . . . . . . . . . . . . . . . . . .58

Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . .58

Suggestions for Timer Recording . . . . . . . . . . 60

EDITING DISCS . . . . . . . . . . . . . . . . . . . . . . . .61

About Disc Editing . . . . . . . . . . . . . . . . . . . . . . . . .61

Title List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Editing in Video Mode . . . . . . . . . . . . . . . . . . . 61

Editing in VR Mode . . . . . . . . . . . . . . . . . . . . . 61

Editing Discs in Video Mode . . . . . . . . . . . . . . . . .62

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 62

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 63

Setting Chapter Markers . . . . . . . . . . . . . . . . . 63

Editing DVD-RW Discs in VR Mode(Original) . . . . .64

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 64

Deleting Parts of Titles. . . . . . . . . . . . . . . . . . . 65

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 65

Setting Chapter Markers . . . . . . . . . . . . . . . . . 66

Setting Pictures for Thumbnails . . . . . . . . . . . . 66

Protecting Titles . . . . . . . . . . . . . . . . . . . . . . . 67

Releasing Title Protect. . . . . . . . . . . . . . . . . . . 67

Editing DVD-RW Discs in VR Mode(Playlist) . . . . . .68

Deleting Titles . . . . . . . . . . . . . . . . . . . . . . . . . 68

Deleting Parts of Titles. . . . . . . . . . . . . . . . . . . 69

Naming Titles . . . . . . . . . . . . . . . . . . . . . . . . . 69

Setting Chapter Markers . . . . . . . . . . . . . . . . . 70

Setting Pictures for Thumbnails . . . . . . . . . . . . 70

Adding Titles to Playlist . . . . . . . . . . . . . . . . . . 71

Deleting Playlist. . . . . . . . . . . . . . . . . . . . . . . . 71

PARENTAL LOCK LEVEL SETTING . . . . . . . . .72

IMPORTANT SAFETY INSTRUCTIONS . . . . . . .2

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .4

SYMBOLS USED IN THIS MANUAL . . . . . . . . . .5

CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

COMPONENT NAMES . . . . . . . . . . . . . . . . . . . .7

Main Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Remote Control Unit . . . . . . . . . . . . . . . . . . . . . . . .8

Inserting Remote Control Batteries . . . . . . . . . . 9

Remote Control Range . . . . . . . . . . . . . . . . . . . 9

CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . .10

Connection of Main Unit . . . . . . . . . . . . . . . . . . . .10

Connection to Cable Box or Satellite Box . . . . . . . .10

Connection to Audio System . . . . . . . . . . . . . . . . .11

Audio Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

OSD DISPLAY SETTING . . . . . . . . . . . . . . . . . .14

OSD LANGUAGE SETTING . . . . . . . . . . . . . . .15

CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . .16

Auto Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Add/Delete Function . . . . . . . . . . . . . . . . . . . . . . .17

Selecting TV Stereo or SAP . . . . . . . . . . . . . . . . . .17

CLOCK SETTING . . . . . . . . . . . . . . . . . . . . . . .18

Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . .18

Manual Clock Setting . . . . . . . . . . . . . . . . . . . . . . .19

DAYLIGHT SAVING TIME . . . . . . . . . . . . . . . . .20

SELECTING TV DISPLAY MODE . . . . . . . . . . .21

GUIDE TO DISPLAY MENUS . . . . . . . . . . . . . .21

OPERATING TV

TV FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . .22

Watching TV Program . . . . . . . . . . . . . . . . . . . . . .22

Setting Sleep Timer . . . . . . . . . . . . . . . . . . . . . . . .22

Adjusting Picture . . . . . . . . . . . . . . . . . . . . . . . . . .23

Setting V-CHIP . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Setting MPAA Rating . . . . . . . . . . . . . . . . . . . . 24

Setting TV Rating . . . . . . . . . . . . . . . . . . . . . . 25

Setting V-CHIP Sub Ratings. . . . . . . . . . . . . . . 25

Setting V-CHIP Access Code. . . . . . . . . . . . . . 26

Selecting Closed Caption . . . . . . . . . . . . . . . . . . . .27

OPERATING VCR

VCR FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . .28

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

Normal Recording . . . . . . . . . . . . . . . . . . . . . . 28

One-Touch Timer Recording . . . . . . . . . . . . . . 29

Guide to Displays . . . . . . . . . . . . . . . . . . . . . . . . .29

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Auto Rewind-Eject . . . . . . . . . . . . . . . . . . . . . . 30

OPERATING DVD RECORDER

PLAYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

About DVD Playing . . . . . . . . . . . . . . . . . . . . . . . .31

Guide to Displays . . . . . . . . . . . . . . . . . . . . . . 31

Language Setting . . . . . . . . . . . . . . . . . . . . . . . . .32

Basic Playback . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Playback with Disc Menu. . . . . . . . . . . . . . . . . 35

Playback with Title Menu . . . . . . . . . . . . . . . . . 35

Special Playback . . . . . . . . . . . . . . . . . . . . . . . . . .36

Resume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Fast Forward / Fast Reverse . . . . . . . . . . . . . . 36

Slow Forward / Slow Reverse . . . . . . . . . . . . . 36

Step by Step . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Setting Marker . . . . . . . . . . . . . . . . . . . . . . . . 38

Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Title/Chapter Search . . . . . . . . . . . . . . . . . . . . 38

Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . 39

Time Search . . . . . . . . . . . . . . . . . . . . . . . . . . 39

CHANGING SETUP MENU

SETUP MENU LIST . . . . . . . . . . . . . . . . . . . . .73

OTHERS

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . .74

MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . .78

LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . .78

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . .79

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . .80

ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . .82

Download from Www.Somanuals.com. All Manuals Search And Download.

OMPONENT NAMES

Main Unit

Front

9 10 11 12

15 16 17 18 19 20 21

Cassette compartment (VCR): Insert a tape here.

12 RECORD indicator (VCR): Blinks during VCR

recording.

Disc tray (DVD): Place a disc on the tray when open.

13 DUBBING button (VCR➔DVD): Press to start VCR to

S-VIDEO input jack (DVD only): Use to connect the

S-Video output of external video components with an

S-Video cable.

DVD duplication.

14 VCR/DVD indicator: Shows the operating status.

Indicator for VCR illuminates during VCR playing and

one for DVD illuminates during DVD playing.

VIDEO input jack: Use to connect external video

components with a standard video cable.

15 CHANNEL

buttons: Press to change the chan-

AUDIO (L/R) input jack: Use to connect external

video/audio components with standard audio cables.

nel up or down. During DVD playback, press to

change the DVD chapter.

Receiving window for remote control signal:

Sensor that receives signal from the remote control unit.

STOP button (DVD): Press to stop playback or record-

ing. Press to stop the proceeding timer recording in DVD.

POWER button: Press to turn the unit on and off.

If timer programmings have been set, press to set the

unit in timer-standby mode. Press to cancel the timer-

standby mode, then turn the unit on.

17 B PLAY button (DVD): Press to start or resume play.

18 I RECORD button (DVD): Press once to start

recording. Press repeatedly to start a One-Touch

Recording.

K L

VOLUME

level.

buttons: Press to adjust the sound

19 RECORD indicator (DVD): Illuminates when you

have programmed the DVD or VCR timer recording

and blinks during DVD recording.

C STOP/A EJECT button (VCR):

A EJECT button- Press to remove the tape from the

unit.

C STOP button- Press to stop tape movement. Press

to stop the proceeding timer recording in VCR.

20 DUBBING button (VCR DVD): Press to start DVD to

VCR duplication.

21 A OPEN/CLOSE button (DVD): Press to open or

10 B PLAY button (VCR): Press to start playback.

close the disc tray.

11 I RECORD button (VCR): Press once to begin

recording. Press repeatedly to start a One-Touch

Recording.

22 HEADPHONE jack: To connect headphone (not sup-

plied) for personal listening.

Rear

AUDIO OUT

COAXIAL

AUDIO OUT COAXIAL jack (DVD sound only):

Use to connect an AV receiver with a coaxial digital

input jack.

• Only DVD, CD and MP3 audio will be output from

this jack.

AC Power Cord: Connect to a standard AC outlet to

supply power to this unit.

ANT. (Antenna input) jack: Use to connect an anten-

na, or cable system.

Download from Www.Somanuals.com. All Manuals Search And Download.

COMPONENT NAMES

Remote Control Unit

15 MUTE button: Press to eliminate the sound temporarily.

16 CHANNEL

buttons: Press to change the chan-

nel up and down.

buttons: During DVD playback, press to

change the DVD chapter.

Press to adjust the video tape playback tracking man-

ually.

17 VOLUME

buttons: Press to adjust the sound

level.

18 TIMER PROG. button: Press to display the timer

program setting menu.

19 DISC MENU button (DVD): Press to display the Disc

menu.

Press to change "Original" and "Playlist". (VR mode

only)

20 CLEAR button:

• During DVD operation

Press to clear the password once entered, to cancel

the programming for CD, to clear the selecting

marker number in the marker setup mode or to

clear the program once entered in the timer record-

ing setting mode, etc.

• During VCR operation

Press to reset the tape counter.

POWER button: Press to turn the unit on and off. If

timer programmings have been set, press to place the

unit in timer-standby mode. Press to cancel the timer

standby mode, then turn the unit on.

K L

/^s/B buttons: Press to select items or settings.

22 REC MONITOR button (DVD): Press to check the

video to be recorded before attempting.

DISPLAY button: Press to display or change the on-

screen display.

23 RETURN button: Press to return to the previously

displayed menu screen.

Number button: Press to select channel numbers.

Press to select a title/chapter/track. Also press to

enter values for the settings in the SETUP menu.

24 PLAY B (DVD) button: Press to start or resume play.

25 STOP C (DVD) button: Press to stop playback or recording.

PICTURE button: Press to adjust the picture.

SETUP button: Press to display the setup menu.

TOP MENU button (DVD): Press to display the top menu.

ENTER button: Press to confirm or select menu items.

26 REW E button:

• During DVD operation

During playback, press to fast reverse. During

pause, press to play slow reverse.

• During VCR operation

Press to rewind the tape or to view the picture

rapidly in reverse during the playback mode.

REC SPEED button: Press to switch DVD REC

MODE or VCR REC SPEED.

27 F.FWD D button:

9 DVD RECORD button: Press once to start a

• During DVD operation

recording.

During playback, press to play fast forward.

During pause, press to play slow forward.

• During VCR operation

Press to rapidly advance the tape or view the pic-

ture rapidly in forward during playback.

10 VCR AUDIO button: During playback a HiFi video tape,

press to change the audio out setting "HIFI" or "MONO."

11 TIME SEARCH button (VCR): Press to call up the

time search menu.

12 VCR RECORD button: Press once to start a

28 PAUSE F button: Press to pause or recording.

29 STOP C (VCR) button: Press to stop playback or recording.

30 PLAY B (VCR) button: Press to start playback.

recording.

13 DUBBING button:

Press VCR

DVD to start dubbing from video tape to DVD.

DVD to start dubbing from DVD to video tape.

14 SLEEP button: Press to activate the sleep timer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Inserting Remote Control Batteries

1 Slide the cover of the remote control unit down

3 Slide and close the cover of the remote control

until the battery compartment appears.

unit.

2 ^{Insert two AA size batteries, making sure that}

their polarities should match the symbols shown

inside the battery casing.

NOTE

• Do not insert old and new batteries mixed together.

• Do not insert different brands or types of batteries

mixed together.

• Always insert new batteries for replacement.

Remote Control Range

Operate the remote control within 30-degree angle

on both sides of the infrared sensor on the main

unit. You can operate the remote control from a dis-

tance of several feet away from the main unit.

NOTE:

Other devices that use infrared beams, sunlight, fluores-

cent lights may affect the range and effectiveness of the

remote control. Make sure that this unit should be posi-

tioned where there is the minimum interference from

other devices.

Approximately

16.5 feet (5 m)

Within 30 degrees

Approximately

22.8 feet (7 m)

Approximately

16.5 feet (5 m)

Download from Www.Somanuals.com. All Manuals Search And Download.

ONNECTIONS

Connection of Main Unit

Antenna

Cable

Signal

Connect

COAXIAL

(Rear of main unit)

Plug in the AC power cord of this unit.

Connection to Cable Box or Satellite Box

(Cable box or

Satellite box)

OUT

Cable

Signal

AUDIO OUT

COAXIAL

(Rear of main unit)

Select this connection when you want to view or record a scrambled channel. With this connection, channels

cannot be changed on the TV/VCR/DVD unit. You can view or record ONLY the channels you have selected

on the cable box or the satellite box.

• While you are recording, only the recorded channel can be viewed.

To select channels of the cable box or satellite box

K L

1) Turn on this unit by pressing POWER button. Then, press the CHANNEL

buttons to select channel 3

or 4 (the same channel as the output channel of the cable box or satellite box).

2) At the cable box or satellite box, select the channel you want to view or record.

Note for the Cable TV System Installer:

This reminder is provided to call the Cable TV system installer's attention to Article 820-40 of the National Electrical Code, which pro-

vides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the

building as close to the point of cable entry as possible.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to Audio System

• Before changing the connections or installing the unit, all devices should be turned off.

• Refer to each owner's manual for further information on other devices.

Receiver with Dolby Digital decoder

COAXIAL

Digital audio

input jack

Audio Coaxial Digital cable

(available wherever consumer

electronics are sold)

AUDIO OUT

COAXIAL

AUDIO OUT

COAXIAL

(digital)

COAXIAL

NOTE:

• When you play a DVD disc with connecting TV/VCR/DVD to a receiver with a Dolby Digital decoder, set "Dolby Digital" to "Stream" for

the "Digital Out" setting in the SETUP menu. (Refer to pages 12-13.)

• The audio source on a DVD disc in a Dolby Digital 5.1 channel surround format cannot be recorded as digital sound by an MD or DAT

deck.

• If the receiver does not have a Dolby Digital decoder, set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu.

Playing a DVD using incorrect settings may generate noise distortion and may also damage the speakers. (Refer to pages 12-13.)

• Set "Dolby Digital" to "PCM" for the "Digital Out" setting in the SETUP menu for connecting to an MD deck or DAT deck. (Refer to

pages 12-13.)

• By hooking this unit up to a Multi-channel receiver with a Dolby Digital decoder, you can enjoy high-quality Dolby Digital 5.1 channel

surround sound as heard in the movie theaters.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trade-

marks of Dolby Laboratories.

NOTE:

• Only DVD, CD and MP3 audio will be available at the AUDIO OUT COAXIAL jack.

Download from Www.Somanuals.com. All Manuals Search And Download.

CONNECTIONS

Digital Out

Audio Setting

Set the digital audio output.

Choose the appropriate audio setting when con-

necting the unit to an external audio system (sold

separately).

Setup > Playback

DVD

TV Mode

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

NOTE: DVD & CD Audio Only

• Only DVD and CD audio will be available to be amplified

through the external audio system.

Dynamic Range Control

Fast Forward with Audio

OFF

NOTE:

• Dynamic Range Control function is available only with discs

recorded in the Dolby Digital format.

Setup > Playback

DVD

• Select a setting using

TV Mode

4:3 Letter Box

All

buttons, then press ENTER

Parental Lock

POWER

SETUP

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

button.

PCM

Dolby Digital

Option window will appear.

Proceed to step [A] or [B].

Dynamic Range Control

Fast Forward with Audio

OFF

[A] Settings for PCM (Default: Auto)

Original

OFF

ENTER

PCM Auto

STOP C (DVD)

48kHz

96kHz

ntrol

udio

Dolby Digital

OFF

STOP C (VCR)

K L

• Select a setting using

ENTER button.

buttons, then press

Press STOP C (DVD) or STOP C (VCR) button

if you are playing a disc or tape.

Your setting will be activated.

Auto : Select "Auto" for normal playback.

1 Press POWER button to turn on the unit.

48kHz : If your amplifier/receiver is NOT compati-

ble with 96kHz PCM, select "48kHz".

Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

96kHz sound will be output in 48kHz.

3 ^{Select "SETUP" using}

buttons, then press

96kHz : If your amplifier/receiver is compatible

with 96kHz PCM, select "96kHz".

96kHz sound will be output.

ENTER button.

SETUP menu will appear.

NOTE:

4 Select "Playback" using / / / buttons, then

When playing disc with copyright protection

press ENTER button.

• If you select "Auto", the sound will be down sampled at 48kHz.

• If you select "96kHz", no digital sound will be output. Select

"Auto", so that outputting 48kHz digital sound.

Option window will appear.

K L

5 Select a desired item using

buttons, then

press ENTER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

[B] Settings for Dolby Digital (Default : Stream)

Fast Forward with Audio (Default : OFF)

Set to “ON” to hear the sound during playback in

fast forward of x2.

Original

OFF

PCM

Setup > Playback

DVD

ntrol

udio

Dolby Digital

PCM

Stream

TV Mode

4:3 Letter Box

All

Parental Lock

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

K L

• Select a setting using

buttons, then press

OFF

ENTER button.

Your setting will be activated.

PCM : Convert the Dolby Digital into PCM 2

channel (stereo).

Setup > Playback

DVD

• Select a setting using

TV Mode

4:3 Letter Box

All

buttons, then press ENTER

Parental Lock

When your amplifier/receiver is NOT

compatible with Dolby Digital, set to

"PCM".

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

button.

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

OFF

Stream : Outputs a Dolby Digital signal.

When your amplifier has a Dolby Digital

decoder, set to "Stream".

6 ^PressSETUP button to exit SETUP menu.

NOTE:

When playing a DVD-RW disc recorded in VR mode

• If the audio source on a disc is Dolby Digital format, set

"Dolby Digital" to "PCM" so that you can switch to main (L),

sub audio (R), or a mix of both (L/R) with your

amplifier/decoder.

Dynamic Range Control (Default : ON)

Set to “ON” to compress the range between soft

and loud sounds.

Setup > Playback

DVD

TV Mode

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

OFF

Setup > Playback

DVD

• Select a setting using

TV Mode

4:3 Letter Box

All

buttons, then press ENTER

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

button.

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

SD DISPLAY SETTING

OSD Background Color (Default : 1 Green)

POWER

Set the OSD screen color.

You can choose one from 1(Green), 2(Blue), and

3(Red).

Setup > Display

VCR DVD

SETUP

OSD Background Transparency 35%

OSD Background Color

OSD Language

Screen Saver

Caption

English

10 minutes

OFF

V-CHIP Setup

ENTER

STOP C (DVD)

STOP C (VCR)

Setup > Display

VCR DVD

K L

• Select a setting using

OSD Background Transparency 35%

Press STOP C (DVD) or STOP C (VCR) button

if you are playing a disc or tape.

buttons, then press ENTER

button.

OSD Background Color

OSD Language

Screen Saver

Caption

English

10 minutes

OFF

V-CHIP Setup

Your setting will be activated.

1 ^PressPOWER button to turn on the unit.

2 Press SETUP button to display SETUP/DISC

menu.

Screen Saver (Default : 10 minutes)

SETUP/DISC menu will appear.

Set the time before the screen saver appears on

the screen.

3 ^{Select "SETUP" using}

buttons, then press

ENTER button.

Setup > Display

VCR DVD

SETUP menu will appear.

OSD Background Transparency 35%

OSD Background Color

OSD Language

Screen Saver

Caption

English

10 minutes

OFF

4 ^{Select "Display" using}/ / / buttons, then

V-CHIP Setup

press ENTER button.

Option window will appear.

K L

5 Select a desired item using

buttons, then

press ENTER button.

Setup > Display

VCR DVD

K L

• Select a setting using

OSD Background Transparency 35%

buttons, then press ENTER

button.

OSD Background Color

OSD Language

Screen Saver

Caption

OFF

English

5 minutes

OSD Background Transparency (Default : 35%)

Set the background transparency of OSD screen.

You can choose between 0% through 100%.

10 minutes

15 minutes

OFF

30 minutes

V-CHIP Setup

Your setting will be activated.

Setup > Display

VCR DVD

OSD Background Transparency 35%

6 ^PressSETUP button to exit SETUP menu.

OSD Background Color

OSD Language

Screen Saver

Caption

English

10 minutes

OFF

V-CHIP Setup

Setup > Display

VCR DVD

K L

• Select a setting using

100%

OSD Background Transparency 35%

85%

70%

50%

buttons, then press ENTER

button.

OSD Background Color

OSD Language

Screen Saver

Caption

English

10 minutes

35%

25%

OFF

10%

V-CHIP Setup

Your setting will be activated.

Download from Www.Somanuals.com. All Manuals Search And Download.

SD LANGUAGE SETTING

You can select the language for on-screen display

(OSD).

POWER

SETUP

ENTER

1 Press POWER button to turn on the unit.

2 ^PressSETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

3 ^{Select "SETUP" using}

buttons, then press

ENTER button.

SETUP menu will appear.

4 Select "Display" using / / / buttons, then

press ENTER button.

Option window will appear.

K L

5 Select "OSD Language" using

buttons, then

press ENTER button.

NOTE:

• Default OSD language setting is English.

6 Select your desired language among "English",

K L

"Français" and "Español" using

buttons,

then press ENTER button.

Your language setting will be activated.

Setup > Display

VCR DVD

OSD Background Transparency 35%

OSD Background Color

OSD Language

Screen Saver

Caption

English

Français

10 minutes

Español

OFF

V-CHIP Setup

7 ^PressSETUP button to exit SETUP menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

HANNEL SETTING

It is recommended that you should preset channels

in your area using "Auto Preset" in the Channel

Preset of the SETUP menu.

5 Press SETUP button to exit.

You can select only the channels memorized in

K L

this unit by using the CHANNEL

buttons.

Auto Preset

NOTE:

K L

• If CHANNEL

buttons does not allow you to select chan-

nels after presetting, try Auto Preset again.

To select a channel :

CHANNEL

You can select a channel by directly entering

channel using the Number buttons on the

remote control.

Number

SETUP

Notes for using the Number buttons:

• When selecting cable channels which are higher than 99,

enter channel numbers as a three-digit number. (For exam-

ple: 117, press 1,1,7)

ENTER

RETURN

• You must precede single-digit channel numbers with a zero

(For example: 02, 03, 04 and so on).

• You can select the line input mode (“AUX”). To select “AUX”

by pressing [0], [0]. Details are on page 56.

1 ^PressSETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

2 ^{Select "SETUP" using}

buttons, then press

ENTER button.

SETUP menu will appear.

3 Select "Channel" using / / / buttons, then

press ENTER button.

Channel Preset menu will appear.

K L

4 Select "Auto Preset" using

buttons, then

press ENTER button.

The unit will begin scanning channels available

in your area.

To cancel the Auto Preset during scanning:

Press RETURN button or SETUP button to cancel.

CH 18

Auto Presetting Now

NOTES:

• If the Auto Preset is cancelled before completing the preset,

some channels that have not been preset may not be available.

• The selection will depend on how you receive the TV channels.

• Be sure to have some type of reception, cable or antenna

connected to the TV before presetting channels.

Download from Www.Somanuals.com. All Manuals Search And Download.

Add/Delete Function

The next channel number will appear so that you

can continue adding or deleting channels.

The channels you no longer receive or seldom

watch can be deleted from the memory. You can

also add channels into memory.

7 Press SETUP button to exit.

Selecting TV Stereo or SAP

SETUP

You can select stereo or SAP (Secondary Audio

Program). "Stereo" has been selected as the default.

ENTER

SETUP

1 Press SETUP button to display SETUP/DISC menu.

ENTER

SETUP/DISC menu will appear.

2 ^{Select "SETUP" using}

buttons, then press

ENTER button.

SETUP menu will appear.

1 Press SETUP button to display SETUP/DISC menu.

SETUP/DISC menu will appear.

3 ^{Select "Channel" using}/ / / buttons, then

press ENTER button.

2 ^{Select "SETUP" using}

buttons, then press

Channel Preset menu will appear.

ENTER button.

SETUP menu will appear.

4 Select "Manual Preset" using

buttons, then

press ENTER button.

3 ^{Select "Channel" using}/ / / buttons, then

Manual Preset menu will appear.

press ENTER button.

Setup > Channel Preset > Manual Preset

Channel Preset menu will appear.

CH2

Add

Delete

K L

4 Select "TV Audio Select" using

buttons,

then press ENTER button.

Option window will appear.

Setup > Channel Preset VCR DVD

Auto Preset

5 ^{To select the channel to add or delete;}

Manual Preset

TV Audio Select

Stereo

SAP

Press button to move to a lower channel number.

Press button to move to a higher channel

number.

Setup > Channel Preset > Manual Preset

K L

5 ^{Select "Stereo" or "SAP" using}

buttons,

then press ENTER button.

CH18

Add

Delete

Stereo:

Outputs main-audio.

SAP: (Secondary Audio Program)

Outputs second audio channel. Refer to the item

in "Glossary" on page 79 for more information.

K L

6 ^{Select "Add" or "Delete" using}

buttons, then

press ENTER button.

The channel number will be added or deleted

from the channel memory.

6 Press SETUP button to exit.

K L

To view TV channels, press CHANNEL

buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

LOCK SETTING

Set the clock before you try timer recording. If a

Public Broadcasting Station (PBS) is available in

your area, follow Auto Clock Setting below. If not,

follow Manual Clock Setting on page 19.

K L

5 Select "Manual" using

buttons, then press

ENTER button.

Enter your PBS channel number using Number

Important

buttons or

ton.

buttons, then press ENTER but-

You must know the local PBS station in your area.

Auto Clock Setting

Setup > Clock

VCR DVD

Clock Setting

Set Channel No.

OFF

Auto Clock Setting

Daylight Saving Time

Auto

CH1

NOTE:

Manual

Off

• Make sure that the antenna or cable are connected to the

unit.

• If the TV/VCR/DVD is connected directly to a cable converter

box or satellite box, the local PBS station must be selected

on the cable box itself, and the TV/VCR/DVD must be set to

the output channel of the cable converter box or satellite box

(usually channel 3 or 4), to be able to set up or correct the

clock automatically.

6 ^PressSETUP button to exit.

7 Press POWER button to turn off the unit.

This unit will search for the time when the power

is off. Leave it off for several minutes to give this

unit time to set the clock.

POWER

Number

NOTE:

• The clock may set itself automatically after you connect the

antenna/cable signal to this unit and plug in the power cord.

After setting, turn the power on to check the current time

appeared on the TV screen is correct.

SETUP

• If the current time is not displayed or the displayed clock is

not correct, set the clock manually.

ENTER

1 Press SETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

2 ^{Select "SETUP" using}

buttons, then press

ENTER button.

SETUP menu will appear.

3 ^{Select "Clock" using}/ / / buttons, then

press ENTER button.

Clock menu will appear.

K L

4 Select "Auto Clock Setting" using

buttons,

then press ENTER button.

Option window will appear.

Setup > Clock

VCR DVD

Clock Setting

Auto Clock Setting

Daylight Saving Time

OFF

Off

Manual

Off

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup > Clock

VCR DVD

Manual Clock Setting

Clock Setting

Auto Clock Setting

Daylight Saving Time

OFF

JAN / 12 / 2004 (MON)

09 : 24 AM

SETUP

ENTER

NOTE:

• Your clock setting will be lost if either there is a power failure

or this unit has been unplugged for more than 3 seconds

when you set the clock manually.

7 ^Press

buttons to select AM or PM, then

press ENTER button.

Clock menu will appear. The settings will be acti-

vated.

1 Press SETUP button to display SETUP/DISC

menu.

Setup > Clock

VCR DVD

Clock Setting

SETUP/DISC menu will appear.

Auto Clock Setting

Daylight Saving Time

OFF

2 Select "SETUP" using

buttons, then press

ENTER button.

SETUP menu will appear.

8 Press SETUP button to exit.

3 Select "Clock" using / / / buttons, then

press ENTER button.

Although seconds are not displayed, they begin

counting from zero.

Clock menu will appear.

4 ^{Select "Clock Setting" using}

buttons, then

When "Auto Clock Setting" is changed to

"Manual", select "OFF" using the following

steps.

press ENTER button.

A clock setting window will appear.

Repeat steps [1] to [3] in "Manual Clock Setting".

Setup > Clock

VCR DVD

Clock Setting

Auto Clock Setting

Daylight Saving Time

OFF

K L

4 Select "Auto Clock Setting" using

buttons,

- - - / - - / - - - - ( - - - )

- - : - -

then press ENTER button.

K L

5 Select "OFF" using

buttons, then press

ENTER button.

Press ENTER button.

Default date will appear.

6 ^PressSETUP button to exit.

K L

5 Enter the date (month / day / year) using

buttons.

Press

buttons to move the cursor.

Setup > Clock

VCR DVD

Clock Setting

Auto Clock Setting

Daylight Saving Time

OFF

JAN / 12 / 2004 (MON)

12 : 00AM

K L

6 Enter the time (hour / minute) using

but-

tons.

Press

buttons to move the cursor.

Download from Www.Somanuals.com. All Manuals Search And Download.

AYLIGHT SAVING TIME

When Daylight Saving Time is ON, the clock will

automatically move forward one hour on the first

Sunday in April and move back one hour on the last

Sunday in October.

SETUP

ENTER

1 Press SETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

2 Select "SETUP" using

buttons, then press

ENTER button.

SETUP menu will appear.

3 ^{Select "Clock" using}/ / / buttons, then

press ENTER button.

Clock menu will appear.

K L

4 ^{Select "Daylight Saving Time" using}

but-

tons, then press ENTER button.

Daylight Saving Time options will appear.

Setup > Clock

VCR DVD

Clock Setting

Auto Clock Setting

Daylight Saving Time

OFF

K L

5 Select "ON" or "OFF" using

buttons, then

press ENTER button.

Choose "ON" when currently observing the day-

light saving time.

6 ^PressSETUP button to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

ELECTING TV DISPLAY MODE

You can select the TV display mode to your viewing

preference for DVD viewing.

3 Select "Playback" using / / / buttons, then

press ENTER button.

"4:3 Letter Box" has been selected as the default.

Playback menu will appear.

K L

4 ^{Select "TV Mode" using}

buttons, then press

ENTER button.

SETUP

Option window will appear.

Setup > Playback

TV Mode

DVD

16:9 Wide

4:3 Letter Box

Parental Lock

4:3 Pan & Scan

ENTER

Disc Menu Language

Audio Language

English

Original

OFF

Subtitle Language

Digital Out

Dynamic Range Control

Fast Forward with Audio

OFF

1 Press SETUP button to display SETUP/DISC

"4:3 Letter Box": black bars appear on the top

and bottom of the screen.

menu.

SETUP/DISC menu will appear.

"4:3 Pan & Scan" : full height picture with both

sides trimmed.

2 Select "SETUP" using

buttons, then press

ENTER button.

K L

5 ^{Select a desired option using}

buttons, then

SETUP menu will appear.

press ENTER button.

6 ^PressSETUP button to exit.

UIDE TO DISPLAY MENUS

Every time you press DISPLAY button, the display will change as follows:

Press DISPLAY button.

Time and Channel display

12:00AM

Current

time

CH 21

Current

channel

number

DVD status display

Press DISPLAY button.

DVD-RW

0:00:00

Video mode

SP 1:25 Rem.

CH 21

For details, see page 31.

Press

DISPLAY

button.

Note:

This menu is available only when a disc is inserted into the unit.

DISC

VCR status display

Press DISPLAY button.

For details, see page 29.

VCR

SLP

COUNT

0:00:03

Press DISPLAY button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING TV

V FUNCTIONS

Watching TV Program

Setting Sleep Timer

POWER

Number

SLEEP

CHANNEL

VOLUME

The sleep timer function automatically turns off the

power at a specified time period.

1 ^PressPOWER button to turn on the unit.

2 Select the desired channel using CHANNEL

1 Press SLEEP button.

K L

buttons or the Number buttons on the

Sleep timer menu will appear.

remote control.

If the TV/VCR/DVD is connected to a cable box

or satellite box, the TV/VCR/DVD must be on

channel 3 or channel 4, then the channel to be

viewed must be selected on the cable box or

satellite box.

SLEEP TIMER [OFF]

3 Adjust the volume to the desired listening level

X Y

using VOLUME

buttons.

2 Press SLEEP button repeatedly to change the

sleep time.

4 Adjust picture controls for a natural looking

The timer can be set up to 2 hours, by 30 min-

utes each time you press SLEEP button.

image. Refer to "Adjusting Picture" on page 23.

3 To cancel the sleep timer, press SLEEP button

repeatedly until "SLEEP TIMER [OFF]" is dis-

played.

Degaussing

Magnetism from nearby appliances and unshielded

speaker systems might affect the color of the TV

picture.

NOTE:

• If you disconnect the unit from the AC outlet, or if you have

a power failure, the sleep time setting will be lost.

If this happens, move this TV/VCR/DVD away from

the appliance. If the color is still not correct, unplug

the power cord, then plug it in again 30 minutes

later.

• This function does not operate during Recording mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adjusting Picture

The adjustments you can make are as follows:

PICTURE

BRIGHT

1 Press PICTURE button.

2 Select the setting item using

buttons.

CONTRAST

NOTE:

• You can use also PICTURE button to select the setting item.

Adjust using

buttons.

BRIGHT

CONTRAST

COLOR

TINT

to decrease brightness to increase brightness

to decrease contrast to increase contrast

COLOR

to pale

to brilliant

to green

to clear

to purple

SHARPNESS to soft

TINT

SHARPNESS

NOTE:

• In the above steps, the picture adjustment display will disap-

pear automatically in about 5 seconds if you do not press

any buttons.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING TV

TV FUNCTIONS

Setting V-CHIP

K L

4 Select "V-CHIP Setup" using

buttons, then

press ENTER button.

"ACCESS CODE" screen will appear.

Number

SETUP

ACCESS CODE

– – – –

ENTER

5 Enter the 4-digit access code using Number but-

tons.

The default access code is "0000". If you have

not set a personal access code, enter "0000".

V-CHIP enables parents to prevent their children

from watching inappropriate material on TV.

V-CHIP reads the ratings for programming (except

for news and sports programs, unedited movies on

premium cable channels and Emergency Broadcast

System signals), then denies access to program-

ming if the program's rating meets or exceeds the

limitations you select. In this case, a "PROTECTED

PROGRAM by..." message appears on the TV

screen.

K L

6 Select "MPAA RATING" using

buttons, then

press ENTER button.

- V-CHIP SET UP -

TV RATING

MPAA RATING

CHANGE CODE

To block certain ratings, follow the steps below.

K L

7 Select the desired limitation using

buttons.

NOTE:

• Programming may be rated by the Motion Picture Association of

America (MPAA) or according to the Television Parental

Guidelines. In order to block any inappropriate programming, set

your limits in both places (MPAA RATING and TV RATING).

[VIEW]

PG-13

• You cannot access the menu when the "PROTECTED PRO-

GRAM by..." message appears. In this case, change to an

unblocked channel, then press SETUP button.

NC-17

Setting MPAA Rating

Then press ENTER button to select [BLOCK] or

[VIEW].

1 ^PressSETUP button to display SETUP/DISC

NOTE:

• When you select a rating category and change it to

menu.

[BLOCK], all higher ratings will change to [BLOCK] automat-

ically. Also, the lower ratings will change to [VIEW] automati-

cally.

SETUP/DISC menu will appear.

2 Select "SETUP" using

buttons, then press

• When you turn "G" to [BLOCK] or [VIEW], all ratings will

change to [BLOCK] or [VIEW] automatically.

ENTER button.

SETUP menu will appear.

8 Press SETUP button to exit.

Rating Category Explanations

3 Select "Display" using / / / buttons, then

press ENTER button.

• G:

General Audience

Display menu will appear.

• PG:

Parental Guidance suggested.

• PG-13: Unsuitable for children under 13

• R:

Restricted; under 17 requires

accompanying

parent or adult guardian

• NC-17: No one under 17 admitted

• X: Mature audience only

Download from Www.Somanuals.com. All Manuals Search And Download.

• The sub ratings that are set to [BLOCK] appear next to the

rating category in TV RATING menu.

Setting TV Rating

• When you turn "TV-Y" to [BLOCK] or [VIEW], all ratings will

change to [BLOCK] or [VIEW] automatically.

1 Press SETUP button to display SETUP/DISC

menu.

8 ^PressSETUP button to exit.

SETUP/DISC menu will appear.

Rating Category Explanations

2 ^{Select "SETUP" using}

buttons, then press

• TV-Y:

Appropriate for all children

ENTER button.

• TV-Y7: Appropriate for children seven

and older

SETUP menu will appear.

• TV-G: General Audience

3 ^{Select "Display" using}/ / / buttons, then

• TV-PG: Parental Guidance suggested.

• TV-14: Unsuitable for children under 14

• TV-MA: Mature audience only

press ENTER button.

Display menu will appear.

K L

4 Select "V-CHIP Setup" using

buttons, then

press ENTER button.

Setting V-CHIP Sub Ratings

"ACCESS CODE" screen will appear.

When you select TV-Y7, TV-PG, TV-14 or TV-MA

and press ENTER button, the sub-rating menu will

appear.

ACCESS CODE

– – – –

If you select the rating category (example: TV-PG)

and change it to [BLOCK] or [VIEW], the sub-rat-

ings (example: V for Violence) will change to

[BLOCK] or [VIEW] automatically.

You can set the sub-ratings to [BLOCK] or [VIEW]

individually when the rating category is set to

[BLOCK]. To set the sub-ratings individually, follow

the procedure below.

5 ^{Enter the 4-digit access code using}Number

buttons.

The default access code is "0000". If you have

not set a personal access code, enter "0000".

NOTE:

K L

6 ^{Select "TV RATING" using}

buttons, then

• When you select TV-Y7:

press ENTER button.

Select "FV" (Fantasy Violence) using

buttons.

- V-CHIP SET UP -

TV-Y7

[BLOCK]

TV RATING

MPAA RATING

CHANGE CODE

Then, press ENTER button to select [BLOCK] or

[VIEW]. Press SETUP button to exit.

• When you select TV-PG, TV-14 or TV-MA:

Select "D" (Suggestive Dialog), "L" (Coarse Language),

K L

7 ^{Select the desired limitation using}

buttons.

TV-Y

[VIEW]

TV-Y7

TV-G

"S" (Sexual Situation) or "V" (Violence) using

tons.

but-

TV-PG

TV-14

TV-MA

TV-PG

[BLOCK]

Then press ENTER button to select [BLOCK] or

[VIEW].

NOTE:

• Refer to the next section, “Setting V-CHIP Sub Ratings” for

Press ENTER button to select [BLOCK] or [VIEW], then

press SETUP button to exit.

• When you select TV-MA, "D" will not appear.

the details about the sub-rating menu of TV-Y7, TV-PG, TV-

14 or TV-MA.

• When you select a rating category and change it to

[BLOCK], all higher ratings will change to [BLOCK] automat-

ically. Also, the lower ratings will change to [VIEW] automati-

cally.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING TV

TV FUNCTIONS

Setting V-CHIP Access Code

K L

6 Select "CHANGE CODE" using

buttons,

then press ENTER button.

- V-CHIP SET UP -

Number

SETUP

TV RATING

MPAA RATING

CHANGE CODE

The following screen will appear.

ENTER

NEW CODE

– – – –

^CONFIR–^M–^CO–^DE–

To change the access code, follow the procedure

below.

1 Press SETUP button to display SETUP/DISC

menu.

7 Enter the desired access code in NEW CODE

box using Number buttons, then enter the same

code in CONFIRM CODE box. Your new access

code is set. The display returns to "V-CHIP SET

UP" menu.

SETUP/DISC menu will appear.

2 ^{Select "SETUP" using}

buttons, then press

ENTER button.

SETUP menu will appear.

NOTE:

3 ^{Select "Display" using}/ / / buttons, then

• If the code in CONFIRM CODE does not match the code in

NEW CODE, repeat step [7], making sure you enter exactly

the same new code in CONFIRM CODE box.

press ENTER button.

Display menu will appear.

• If a power failure occurs, the access code returns to the

default access code, "0000".

K L

4 Select "V-CHIP Setup" using

buttons, then

• If you connect the power cord to an AC outlet that is con-

trolled by a wall switch, the access code will be erased

every time you turn off the power at the wall switch. The

access code returns to the default access code.

press ENTER button.

"ACCESS CODE" screen will appear.

ACCESS CODE

8 Press SETUP button to exit.

– – – –

If You Forget Your Access Code

Return the access code to the default code,

"0000". To restore "0000" as the personal

access code, unplug the TV's power cord for 10

seconds, then plug it in again.

5 ^{Enter the 4-digit access code using}Number but-

tons.

The default access code is "0000". If you have

not set a personal access code, enter "0000".

Download from Www.Somanuals.com. All Manuals Search And Download.

Selecting Closed Caption

SETUP

ENTER

You may view specially labeled (cc) TV programs,

movies, news, prerecorded tapes, etc. with either

dialogue captions or text added to the display.

1 Press SETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

2 Select "SETUP" using

buttons, then press

ENTER button.

SETUP menu will appear.

3 Select "Display" using / / / buttons, then

press ENTER button.

Display menu will appear.

K L

4 ^{Select "Caption" using}

buttons, then press

ENTER button.

Option window will appear.

Setup > Display

VCR

OSD Background Transparency 35%

OSD Background Color

OSD Language

Screen Saver

Caption

OFF

English

CAPTION 1

10 minutes

CAPTION 2

OFF

TEXT 1

TEXT 2

V-CHIP Setup

K L

5 Select a desired option using

buttons, then

press ENTER button.

Select “OFF” to cancel the closed caption sys-

tem.

6 ^PressSETUP button to exit.

NOTE:

• If the TV/VCR/DVD displays a black box on the TV screen,

this means that the TV/VCR/DVD is set to the TEXT mode.

To clear screen, select “CAPTION 1”, “CAPTION 2” or

“OFF”.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING VCR

CR FUNCTIONS

Playback

Recording

VCR

Normal Recording

VCR

POWER

Before recording, make sure:

CHANNEL

• Stereo or SAP is selected (page 17).

• The desired channel should be selected by press-

ing the Number buttons on the remote control or

K L

CHANNEL

buttons on the main unit.

•

A tape with a record tab should be loaded inside the unit.

The desired recording speed should be selected in SP

(standard play) or SLP (super long play) mode by

pressing REC SPEED button twice on the remote con-

K L

trol. Use

buttons to change the recording speed.

STOP C (VCR)

PLAY B (VCR)

•

Refer to page 58 for instructions on timer recording.

VCR

1 Press POWER button on the remote control or

the main unit.

Recording speed:

2 ^{Insert a prerecorded tape, then press}PLAY

Tape speed

Type of tape

SP mode

Recording/PlaybackTime

(VCR) button to begin playback.

T60

T120

2hours

6hours

T160

2-2/3hours

8hours

1hour

3hours

NOTE:

SLP mode

• When a tape without the record tab is inserted, the unit will

start playback automatically.

• Tracking will be automatically adjusted upon playback. To

CHANNEL

adjust the tracking manually, press the CHANNEL

but-

Number

tons on the main unit or CHANNEL

buttons on the

remote control.

3 Press STOP C (VCR) button to stop playback.

4 Press C STOP/A EJECT button on the main

unit to eject the tape.

REC SPEED

PAUSE

VCR RECORD

STOP C (VCR)

1 ^PressVCR RECORD button to begin the recording.

To temporarily stop recording, press PAUSE F button.

Press VCR RECORD button to resume the recording.

When 5 minutes have passed since the unit entered

Pause mode, the recording will automatically stop.

2 ^PressSTOP C (VCR) button when the recording

is completed.

Accidental erasure prevention

NOTES:

To prevent accidental recording

on a recorded cassette, remove

its record tab. To record on it

later,cover the hole with cello-

Record tab

phane tape.

• You can ONLY watch the same TV program that is being

recorded.

Download from Www.Somanuals.com. All Manuals Search And Download.

One-Touch Timer Recording

Time Search

VCR

This feature allows you to set the recording length

simply by pressing I RECORD (VCR) button on the

main unit.

This feature allows you to go to a specific point on a

tape by entering the exact amount of time you wish

to skip.

C STOP /

A EJECT

(VCR)

I RECORD

(VCR)

1 During normal recording, press I RECORD (VCR)

button on the main unit to begin one-touch timer

recording.

TIME SEARCH

You can select a fixed recording time by pressing

the I RECORD (VCR) button on the main unit

repeatedly.

1 Press TIME SEARCH button.

Time search menu will appear.

(0:30)

(1:00)

(Normal recording)

(8:00)

K L

2 ^{Enter your desired time to skip using}

but-

(7:30)

tons.

TIME SEARCH

2:50

When one-touch timer recording finishes, the

unit will turn off automatically.

To cancel the one-touch timer recording within

the specified time, press STOP C (VCR) button.

NOTE:

• If One-Touch Timer Recording finishes in VCR during play-

back or Record mode in DVD, the VCR will be in Stop mode

and the DVD keeps the current mode.

3 ^Press

buttons to start time search.

Forward or Reverse

If you want to move a tape forward, press but-

ton.

Guide to Displays

Press DISPLAY button repeatedly to bring up the

display for VCR status.

If you want to move a tape backward, press

button.

After time search, the unit will play the tape

automatically.

NOTES:

• Time Search function is not available during recording.

VCR

SLP

HIFI

COUNT

• To stop the time search, press STOP C (VCR) button at

step [3].

0:00:03

• To exit the time search menu, press RETURN button at

step [2].

• If a tape reaches to the end during the search, this unit

will cancel the search and rewind the tape.

1. Status of the current tape appears for 5 seconds

2. A recording speed appears for 5 seconds

3. Indicates a Tape Counter

4. Audio status of the played tape

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING VCR

VCR FUNCTIONS

• When you want to enjoy the sound in monaural,

select "MONO".

Other Functions

VCR

Your Selection

HIFI

MONO

Monaural

L+R

L-channel

R-channel

Type of recorded tape

non Hi-Fi tapes

Monaural

CHANNEL

Hi-Fi tapes

recorded in

Hi-Fi stereo

Hi-Fi tapes

recorded main

audio program

Main audio

program

Main audio

program

Main audio

program

CLEAR

Hi-Fi tapes

recorded second

audio program

Second audio Second audio Second audio

program program program

STOP C (DVD)

E /

VCR AUDIO

PAUSE

Auto Rewind-Eject

To cue or review picture during playback

(Picture Search):

VCR

• When the end of a tape is reached during record-

ing, playback or fast-forward, the tape will auto-

matically rewind to the beginning. After rewinding

finishes, the TV/VCR/DVD will eject the tape.

Press g or h buttons during playback.

Press it again and the unit will search in super high

speed. (in the SLP mode only)

• The tape will not auto-rewind during timer

recording or One-Touch Timer Recording.

To freeze the picture on TV screen during play-

back (Still mode):

Press PAUSE F button. Each time you press the

button, the picture will move forward by one frame.

If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

K L

CHANNEL

buttons.

Counter Reset:

Press CLEAR button. The counter appears on the

TV screen. Press CLEAR button again to reset.

To playback in slow motion:

Press PAUSE F button during playback, then press

D button. Playback in slow motion will start.

If noise bars appear on the TV screen, you can

K L

reduce them by pressing CHANNEL

buttons.

NOTE:

• Still/Slow/Pause mode will be automatically cancelled in 5

minutes to prevent damage to the tape and the video head.

• To return to playback from the Picture Search/Still/Slow mode,

press PLAY B (VCR) button.

When you playback a tape recorded in Hi-Fi

stereo:

Press VCR AUDIO button on the remote control to

select Hi-Fi or MONO for playback sound mode.

• When you want to enjoy the sound in stereo,

select "HIFI".

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

LAYING

About DVD Playing

Before you play DVD discs, read the following information.

Playable discs

Region codes

This unit is compatible to play the following discs.

This unit has been designed to play DVD discs with

Region One (1). DVDs must be labeled for ALL

regions or for Region 1 in order to play on this unit.

To play a DVD, make sure that it meets the requirements

for Region Codes and Color Systems as described below.

Discs with the following logos can be played on the unit.

Other Disc types are not guaranteed to play.

You cannot play DVDs labeled for other regions.

Make sure to check the symbols below on your

DVDs. If these region symbols are not found on your

DVD, you cannot play that DVD in this unit.

Color systems

Disc

Logo

DVDVIDEO

The number inside the globe refers to region of the

world. Region 1 represents the United States,

Canada, Bermuda, the U.S.Virgin Islands and small

regions near Australia.

DVD-RW (VIDEO/VR MODE)

DVD-R (VIDEO MODE)

A DVD labeled for a specific region can only play on

the unit with the same region code.

CD-DA (AUDIO CD)

DVD playback

The contents of DVD disc are generally divided into

titles. Titles may be further subdivided into chapters.

CD-R (CD-DA FORMAT, MP3 files)

CD-RW (CD-DA FORMAT, MP3 files)

Start Rec.

Title 1

Stop/Start

Stop Rec.

DVDs are recorded in different color systems

throughout the world. The most common color sys-

tems are NTSC (which are used primarily in the

United States and Canada), PAL and SECAM. This unit

uses NTSC, so DVDs you play must be recorded in

the NTSC system.You cannot play DVDs recorded in

other color systems.

Title 2

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

Guide to Displays

Press DISPLAY button repeatedly to bring up the

display menu for DVD status. This menu will give

you the information on the playing disc. Some oper-

ations are available while disc is playing.

1. Indicates a disc type and a format mode.

2. Indicates a recording speed and possible record-

ing time left.

3. Indicates a current channel number.

NOTE:

4. Indicates a title number, chapter number and the

time elapsed of disc play.

This menu is available only

when a disc is inserted into

the unit.

DVD-RW

0:00:00

Video mode

5. Icon Legend:

SP 1:25 Rem.

CH 1

: Search

: Marker

: Audio

: Noise Reduction

: Zoom

: Subtitle

: Angle (except VR mode)

: Repeat

: Virtual Surround

DISC

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

Language Setting

Audio Language (Default : Original)

Set the Audio language.

NOTE:

• Only the languages supported by the disc can be selected.

Setup > Playback

DVD

TV Mode

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Number

SETUP

Dynamic Range Control

Fast Forward with Audio

OFF

Setup > Playback

DVD

• Select a setting using

ENTER

TV Mode

4:3 Letter Box

All

buttons, then press ENTER

Parental Lock

Original

STOP C (DVD)

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

button.

Original

French

OFF

Spanish

Other

Your setting will be activated.

STOP C (VCR)

Dynamic Range Control

Fast Forward with Audio

OFF

Press STOP C (DVD) or STOP C (VCR) button if

you are playing a disc or tape.

Subtitle Language (Default : OFF)

1 ^PressSETUP button to display SETUP/DISC

Set the subtitle language.

menu.

Setup > Playback

DVD

SETUP/DISC menu will appear.

TV Mode

4:3 Letter Box

All

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

2 Select "SETUP" using

buttons, then press

ENTER button.

Dynamic Range Control

Fast Forward with Audio

OFF

SETUP menu will appear.

3 Select "Playback" using / / / buttons, then

press ENTER button.

Setup > Playback

DVD

• Select a setting using

Option window will appear.

TV Mode

4:3 Letter Box

All

buttons, then press ENTER

Parental Lock

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

K L

4 ^{Select a desired item using}

buttons, then

button.

Original

French

OFF

Other

Spanish

press ENTER button.

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

OFF

NOTE:

• Audio Language setting may not be available to some discs.

• You can change or switch off the subtitles on a DVD disc

also from the disc menu if it is available.

If "Other" is selected, press 4-digit code using

Number buttons.

Disc Menu Language (Default : English)

Setup > Playback

TV Mode

4:3 Letter Box

All

Set the language for Disc Menu.

Parental Lock

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

French

Original

Spanish

Setup > Playback

DVD

OFF

Other

TV Mode

4:3 Letter Box

All

Code Input

- - - -

Parental Lock

Dynamic Range Control

Fast Forward with Audio

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Dynamic Range Control

Fast Forward with Audio

• When you finish entering the code, press

ENTER button. Refer to the language code

table on page 78.

OFF

5 Press SETUP button to exit SETUP menu.

Setup > Playback

DVD

• Select a setting using

buttons, then press

ENTER button.

TV Mode

4:3 Letter Box

All

Parental Lock

English

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

French

Original

Spanish

OFF

Other

Your setting will be activated.

Dynamic Range Control

Fast Forward with Audio

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Playback

VR mode:

Original

Playback

DVD-R DVD-RW (Video) DVD-RW (VR)

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

POWER

JAN/1 3:00AM

JAN/1 4:00AM

DISC MENU button

Playlist

TOP MENU

ENTER

DISC MENU

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

STOP C (DVD)

NOTE:

• Press the TOP MENU button to exit the menu.

• Disc menu is only available for VR mode recorded disc.

1 ^PressPOWER button.

• For DVD-R (Video mode) and DVD-RW (Video mode) discs

which are already finalized, a title list will be displayed

instead of thumbnails as shown below.

2 Press OPEN/CLOSE button on the main unit

to open the disc tray.

Title Menu

The disc tray will open.

JAN/1 12:24AM CH96 XP

3 ^{Place the disc onto the disc tray with its label}

facing up and make sure to align the disc to the

disc tray guide. Press

OPEN/CLOSE button

again to close the disc tray.

NOTE:

5 ^{Select a desired title using}/ / / buttons,

• This operation may take a few minutes to complete.

then press ENTER button.

• Some discs may start playing automatically.

Playback will start.

6 ^PressSTOP C (DVD) button to stop playback.

NOTE:

disc

tray

guide

• You can resume play from where you stopped playing the

disc. (Resume play) Refer to page 36 for details about

resume play.

To eject the disc, press

OPEN/CLOSE button

4 Press TOP MENU button to display the title

to open the disc tray, then remove the disc

before turning off the unit.

menu.

You can change "Original" or "Playlist" of VR

mode using DISC MENU button.

Video mode:

Title List

JAN/1 12:00AM

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

DVD-V

MP3

POWER

TOP MENU

ENTER

RETURN

STOP C (DVD)

1 In stop mode, press TOP MENU button to bring

up the MP3 menu.

PLAY B (DVD)

STOP C (DVD)

List of MP3 Files

DISC NAME

FOLDER NAME 1

FOLDER NAME 2

FOLDER NAME 3

FOLDER NAME 4

FOLDER NAME 5

FOLDER NAME 6

1 Press POWER button.

FILE NAME 1

FILE NAME 2

2 Press OPEN/CLOSE button on the main unit

1/2

to open the disc tray.

The disc tray will open.

To exit the menu, press TOP MENU button again.

NOTE:

3 Place the disc onto the disc tray with its label

facing up and make sure to align the disc to the

disc tray guide.

• If you press

OPEN/CLOSE button to close the disc tray,

the automatic playback will not start, but MP3 menu will

appear.

4 ^PressPLAY B (DVD) button to start playing.

2 Press

buttons to select a desired folder

(group) or track, then press ENTER button.

Playback will start.

When selecting track:

• If you are playing a DVD-Video disc, a menu

may appear.

Refer to page 35 for details about a disc menu.

Playback will start.

When selecting the folder:

The files in the folder will appear.

5 ^PressSTOP C (DVD) button to stop playing.

Press or button to select the track or folder

NOTE:

• Some discs may start playing automatically.

you want, then press ENTER button.

• Press button or RETURN button to go to the

previous hierarchy.

• Press STOP C (DVD) button to return to the

first item.

Hints for MP3 files:

•

Folders are known as Groups, files are known as Tracks.

• Folders are accompanied by

• MP3 files are accompanied by

icon.

Playback will start from the selected track and go to

the next one in turn.

• The system can recognize up to 255 groups (or fold-

ers) and up to 255 tracks.

• The name of the group and track can be displayed in

up to 32 characters. Unrecognizable characters will

be replaced with asterisks.

•

If the folder includes no files, "No Files" will be displayed.

• The audio source of MP3 files cannot be recorded as

digital sound by an MD or DAT deck.

• Files whole extension other than ".mp3 (MP3)" will

not be listed in the MP3 menu.

• Some unplayable folders or tracks may be listed in the

MP3 menu due to the recording status.

This unit recommends the files recorded under the fol-

lowing circumstances:

• Sampling frequency: 44.1kHz or 48kHz.

• Constant bit rate: 112kbps - 320kbps.

Download from Www.Somanuals.com. All Manuals Search And Download.

Playback with Disc Menu

Playback with Title Menu

DVD-V

A DVD disc contains a disc menu that describes the

contents or allows you to customize the playback.

For example, the menu may offer choices for subti-

tle languages, special features, or chapter selection.

Some DVDs have a title menu, which lists the titles

available on them. It helps you to start playback at a

specific title.

Some disc menus are automatically displayed when

you start playback, others only appear when you

press DISC MENU button.

Number

TOP MENU

Number

ENTER

DISC MENU

1 ^PressTOP MENU button.

The title menu will appear.

NOTE:

ENTER

• The TOP MENU button will not always be active with all

DVDs.

1 ^PressDISC MENU button.

The DVD main menu will appear.

NOTE:

• Menus vary among discs. Refer to the information accompa-

nying the disc for details.

If the feature is not available,

the TV screen.

may appear on

• Menus vary among discs. Refer to the information accompa-

nying the disc for details.

If the feature is not available,

the TV screen.

may appear on

2 Select a title to play using the / / / buttons,

then press ENTER button.

Playback will begin at the title you selected.

2 Select an item using / / / buttons, then

TOP MENU button:

press ENTER button to confirm.

Displays the 'Title menu' of a DVD disc that

varies with the disc.

Continue this step to set up all the features you

want or to start playing the disc from the menu.

/ / / buttons:

DISC MENU button:

Moves the cursor on the screen.

ENTER button:

Displays a DVD disc menu which varies with the

disc and may be the same as the 'Title menu.'

/ / / buttons:

Selects the current highlighted menu option.

Number buttons:

Moves the cursor on the screen.

ENTER button:

Selects a numbered menu option (only for some

discs). ENTER button should be pressed after

pressing Number buttons.

Selects the currently highlighted menu option.

Number buttons:

Selects a numbered menu option (only for some

discs). ENTER button should be pressed after

pressing Number buttons.

3 ^PressTOP MENU button to exit the title menu.

3 Press DISC MENU button to exit the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

Fast Forward / Fast Reverse

Special Playback

DVD-V DVD-R DVD-RW (Video)

Resume

DVD-RW (VR)

MP3

DVD-V DVD-R DVD-RW (Video)

DVD-RW (VR)

MP3

PLAY B (DVD)

E D

You can resume play from where you stopped play-

ing the disc last.

NOTE:

1 During playback, press D or E button.

• For MP3 files, playback will resume from the beginning of the

track at which playback was stopped.

Every time you press D or E button, approxi-

mate speed changes as follows.

Normal

speed

PLAY B (DVD)

STOP C (DVD)

x40

x20

x40

playback

For Audio CDs, approximate speed is set at x8

with sound.

1 During playback, press STOP C (DVD) button.

The resume message will appear.

For MP3 files, approximate speed is set at x16.

To return to the normal playback, press PLAY

DISC Resume ON

(DVD) button.

NOTE:

2 Press PLAY B (DVD) button.

• For DVD discs, the sound will be output during playback in

fast forward of x2 only if you set "Fast Forward with Audio" to

"ON" for the "Playback" setting in the SETUP menu.

In a few seconds, playback will resume from the

point at which it stopped last.You can resume

play at the same point even if you turn off the unit.

• Forward/reverse speed will be indicated with icons as follows.

Forward (Approx. Speed)

Reverse (Approx. Speed)

x2 :

x20:

x40:

x5 :

x20:

x40:

To cancel the resume play and start playing the

disc from the beginning, press STOP C (DVD)

button again while the playback is stopped.

Slow Forward / Slow Reverse

Pause

DVD-V DVD-R DVD-RW (Video) DVD-RW (VR)

DVD-V DVD-R DVD-RW (Video)

DVD-RW (VR)

MP3

PLAY B (DVD)

E D

PAUSE

PLAY B (DVD)

PAUSE

1 During playback, press PAUSE F button, then

press D or E button.

Every time you press D or E button, approxi-

mate speed will be changed as follows.

1 During playback, press PAUSE F button.

Playback will pause and sound will be muted.

Pause

x1/4

x1/8

x1/16

x1/8

x1/2

To return to the normal playback, press PLAY

(DVD) button.

DISC

NOTE:

• The sound will remain mute.

2 ^PressPLAY B (DVD) button to resume play.

• Forward/reverse speed will be indicated with icons as fol-

lows.

Forward (Approx. Speed)

Reverse (Approx. Speed)

x1/16:

x1/8 :

x1/2 :

x1/16:

x1/8 :

x1/4 :

Download from Www.Somanuals.com. All Manuals Search And Download.

Step by Step

Zoom

DVD-V DVD-R DVD-RW (Video) DVD-RW (VR)

DISPLAY

CHANNEL

PLAY B (DVD)

ENTER

PAUSE

1 During playback, press PAUSE F button.

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

Playback will pause and sound will be muted.

DVD-Video

1:23:45

2 Select

ENTER button.

Zoom option menu will appear.

icon using

buttons, then press

DISC

2 ^PressCHANNEL button repeatedly.

DVD-Video

01:23:45

Every time you press the button, the playback

will go forward by one frame (or step) with the

sound muted.

x1.2

x1.5

x2.0

Three options (x1.2, x1.5, x2.0) excluding the

current zoom rate are displayed.

Press CHANNEL button repeatedly.

Every time you press the button, the playback

will go backward by one frame.

3 Select a desired zoom factor to zoom using

buttons, then press ENTER button.

The zoom area will be displayed.

3 Press PLAY B (DVD) button to resume play.

4 ^{Select a desired zoom position using}/ / /

buttons, then press ENTER button.

The zoom play will start.

NOTE: Zoom

• When selecting a smaller factor than the current one, the

zoom area will not be displayed.

•

To remove the zoom menu, press DISPLAY button again at step [1].

• To cancel the zoom function, select x1.0 using s / B but-

tons, then press ENTER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

Setting Marker

DVD-V DVD-R DVD-RW (Video)

DVD-V DVD-R DVD-RW (Video) DVD-RW (VR)

Title/Chapter Search

DVD-RW (VR)

This feature allows you to assign a specific point on

a disc to be returned to later.

DISPLAY

CHANNEL

DISPLAY

Number

CLEAR

ENTER

Using CHANNEL

buttons

1 During playback, press CHANNEL button to

1 ^{During playback, press}DISPLAY button repeated-

skip the current title or chapter and move to the

next.

ly until the DVD status display menu appears.

DVD-Video

The title or chapter will move forward by one title

at a time.

1:23:45

To go back to the previous title or chapter, press

CHANNEL button. The title or chapter will

2 Select

ENTER button.

Marker setup menu will appear.

Screen for DVD: Screen for CD:

icon using

buttons, then press

move backward by one title at a time.

Only press CHANNEL button once to go back

to the top of the current title.

DVD-Video

Audio CD

01:23:45

Using DISPLAY button

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

3 ^{Select a desired marker number using}

but-

DVD-Video

1:23:45

tons.

When it reaches the desired point, press ENTER

button.

2 ^Select

icon using

ENTER button.

buttons, then press

4 To return to the marker later, select the desired

marker number using

buttons, then press

'T' for title will be highlighted.

ENTER button.

Title:

NOTE: Marker

K L

Enter a desired title number to search using

• You can mark up to 6 points.

• To clear a marker, select the marker number to be cleared,

then press CLEAR button.

• All markers will be erased by the following operation:

Opening the disc tray

Turning off the power

Recording to a recordable disc

Changing the mode between Original and Playlist

(VR mode)

buttons or Number buttons, then press ENTER

button. Title search will start.

Chapter:

To move to 'C' for chapter, press ^Bbutton.

Enter a desired chapter number to search using

K L

buttons or Number buttons, then press

Editing the disc

ENTER button.

Chapter search will start.

Download from Www.Somanuals.com. All Manuals Search And Download.

Track Search

Time Search

MP3

DVD-V DVD-R DVD-RW (Video)

DVD-RW (VR)

DISPLAY

Number

DISPLAY

Number

CHANNEL

ENTER

Using CHANNEL

buttons

1 During playback, press CHANNEL button to

1 During playback, press DISPLAY button repeated-

skip the current track and move to the next.

ly until the DVD status display menu appears.

The track will move forward one at a time.

Screen for DVD:

To go back to the previous track, press CHAN-

NEL button. The track will move backward one

DVD-Video

1:23:45

track at a time.

Screen for CD:

Using DISPLAY button

Audio CD

01:23:45

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

Audio CD

01:23:45

2 Select

ENTER button.

'T' for title or track will be highlighted.

icon using

buttons, then press

2 Select

icon using

ENTER button.

buttons, then press

(clock) icon, press button.

To move to the

'T' for track will be highlighted.

3 Enter a desired time to search using

but-

tons or Number buttons, then press ENTER but-

3 Enter a desired track number to search using

ton.

K L

buttons or Number buttons, then press

Time search will start.

ENTER button.

NOTE:

Track search will start.

• Time search function is available only in the same track or

title.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

Repeat/Random/Program Play

Track: CD, MP3 only

The current track will be played repeatedly.

Group: MP3 only

Repeat Play

DVD-V DVD-R DVD-RW (Video)

The current group will be played repeatedly.

DVD-RW (VR)

MP3

NOTE:

• You cannot select "Group" during the random playback of

MP3 files.

DISPLAY

Random Play

MP3

You can play tracks on a disc randomly instead of

playing it in the recorded sequence.

ENTER

SETUP

1 ^{During playback, press}DISPLAY button repeated-

ly until the DVD status display menu appears.

DVD-Video

1:23:45

ENTER

STOP C (DVD)

2 Select

ENTER button.

Repeat menu will appear.

icon using

buttons, then press

1 In the stop mode, press SETUP button to display

SETUP/CD menu.

DVD-Video

01:23:45

SETUP/CD menu will appear.

OFF

Title

Chapter

A-B

2 ^{Select "CD" using}

buttons, then press

ENTER button.

NOTE:

• To cancel the repeat playback, select OFF.

CD Playback Mode menu will appear.

K L

3 Select a desired option to repeat using

but-

K L

3 ^{Select "Random Play" using}

buttons, then

tons, then press ENTER button.

press ENTER button.

Title: DVD only

Random playback will start.

The current title will be played repeatedly.

NOTE:

• To cancel random playback, press STOP C (DVD) button

Chapter: DVD only

during random playback.

The current chapter will be played repeatedly.

All: CD, MP3 and DVD-RW (VR mode only)

The current disc will be played repeatedly.

A-B:

The A-B point will be played repeatedly.

When pressing ENTER button while A-B is high-

lighted, the starting point (A) will be decided.

Press ENTER button again to select the ending

point (B).

NOTE:

• The A-B Repeat playback can only be set within the current

title (for DVDs) or current track (for Audio CDs).

Download from Www.Somanuals.com. All Manuals Search And Download.

Program Play

Selecting AUDIO / VIDEO Menu

You can select an audio or video format, as you pre-

fer depending on the contents of the disc you are

playing.

You can program tracks on a disc to be played in

your desired order.

Switching Audio Soundtrack

NOTE:

• You can make program up to 50 tracks.

DVD-V DVD-RW (VR)

When playing a DVD-Video disc recorded with two

or more soundtracks (mostly in different languages),

you can switch between them anytime during play-

back.

Number

SETUP

CLEAR

NOTE:

• Some discs will only allow you to change the soundtrack

from the disc's menu. Press TOP MENU button or DISC

MENU button to display the disc's menu.

ENTER

PLAY B (DVD)

• On DVD-RW discs recorded in VR mode that may have both

a main and a sub audio channel, you can switch to main (L),

sub audio (R) or a mix of both (L/R).

STOP C (DVD)

1 ^{In the stop mode, press}SETUP button to display

DISPLAY

SETUP/CD menu.

SETUP/CD menu will appear.

2 Select "CD" using

buttons, then press

ENTER button.

CD Playback Mode menu will appear.

K L

3 Select "Program Play" using

buttons, then

ENTER

press ENTER button.

Program Play list will appear.

1 ^{During playback, press}DISPLAY button repeated-

CD Playback Mode > Program Play

ly until the DVD status display menu appears.

- - - - - - - - - - - - - - - - - - - -

DVD-Video

1:23:45

Total

00:00:00

2 Select

icon using

ENTER button.

buttons, then press

4 ^{Select a desired track using K/L buttons, then}

press ENTER button or button.

Audio menu will appear.

<DVD-Video>

A cursor will move to the next.

CD Playback Mode > Program Play

DVD-Video

1:23:45

07 - - - - - - - - - - - - - - - - - -

- - - - - - - - - - - - - - - - - - - -

Dolby Digital 5.1ch English

Dolby Digital 2ch Japanese

Total

00:04:30

<DVD-RW VR mode>

DVD-RW

VR Original

1:23:45

NOTE:

Dolby Digital Dual L/R

Dolby Digital 2ch ----

• You may also select a desired track using Number buttons.

• To erase tracks you selected, press CLEAR button.

Press PLAY B (DVD) button to start program playback.

Program playback will start according to your program.

NOTE:

Continue on next page.

• To cancel program playback, press STOP C (DVD) button

twice during program playback.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

MP3

3 Select a desired audio soundtrack using

buttons, then press ENTER button.

When playing Audio CDs or MP3 files you can

switch between stereo, the left channel only or the

right channel only.

<DVD-Video>

Audio soundtrack will switch.

<DVD-RW VR mode>

DISPLAY

You can switch to main (L), sub audio (R) or a

mix of both (L/R). In this case, follow the step [4].

DVD-RW

VR Original

1:23:45

Dolby Digital Dual

Dolby Digital 2ch

L/R

K L

4 Select a desired audio channel using

but-

tons, then press ENTER button.

ENTER

Audio channel will switch.

NOTE:

1 During playback, press DISPLAY button repeated-

• This unit CANNOT record in both stereo and SAP

(Secondary Audio Program) at the same time.

ly until the DVD status display menu appears.

Audio CD

1:23:45

2 ^Select

icon using

ENTER button.

Audio menu will appear.

buttons, then press

K L

3 ^{Select a desired audio channel using}

but-

tons, then press ENTER button.

Audio channel will change.

Audio CD

1:23:45

L/R

Download from Www.Somanuals.com. All Manuals Search And Download.

Switching Subtitles

Switching Camera Angles

DISPLAY

DVD-V DVD-RW (VR)

DVD-V

Many DVD Video discs have subtitles in one or

more languages. The case usually tells you which

subtitle languages are available. You can switch sub-

title languages anytime during playback.

NOTE:Top Menu / Disc Menu

• Some discs allow you to change the subtitle only from the

disc's menu. Press TOP MENU button or DISC MENU but-

ton to display the disc's menu.

DISPLAY

ENTER

Some DVD Video discs feature scenes shot

from two or more angles, check the case of

the DVD for details:

it should be marked with an angle icon if it

contains multi-angle scenes.

DISC MENU

ENTER

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

DVD-Video

01:23:45

1 ^{During playback, press}DISPLAY button repeated-

ly until the DVD status display menu appears.

DVD-Video

1:23:45

DISC

Angle icon appears when a switching camera

angle is available.

2 Select

ENTER button.

Subtitle menu will appear.

icon using

buttons, then press

2 ^Select

icon using

buttons, then press

ENTER button.

DVD-Video

1:23:45

Angle will switch each time you press ENTER

button.

OFF

1English

2Japanese

K L

3 ^{Select a desired subtitle language using}

buttons, then press ENTER button.

Subtitle will be displayed in the selected lan-

guage.

When selecting "OFF", subtitle will disappear.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

PLAYING

Reducing Block Noise

Virtual Surround Setting

DVD-V DVD-R DVD-RW (Video) DVD-RW (VR)

This function reduces noise in the playback picture.

Switching to virtual surround setting allows you to

enjoy DVD disc with a surround effect.

DISPLAY

ENTER

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

1 During playback, press DISPLAY button repeated-

ly until the DVD status display menu appears.

DVD-Video

1:23:45

DVD-Video

1:23:45

2 ^Select

icon using

ENTER button.

NR menu will appear.

buttons, then press

2 ^Select

icon using

ENTER button.

Virtual surround menu will appear.

buttons, then press

DVD-Video

1:23:45

DVD-Video

01:23:45

OFF

Type 1

Type 2

OFF

K L

3 ^{Select a desired option using}

buttons, then

K L

press ENTER button.

3 Select "ON" using

buttons, then press

ENTER button.

Your setting will be activated.

Virtual surround setting will be activated.

When playing back discs recorded in long time

mode such as SLP or SEP mode, select "Type

1" or "Type 2". ("Type 2" is more effective.) When

playing back prerecorded DVD discs with little or

no noise, select "OFF".

NOTE:

• To turn off virtual surround, select "OFF" in Virtual Surround

menu screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

UIDE TO DISPLAYS ON SCREEN MENU

This unit uses the following types of display for most operations. SETUP/DISC/CD menu, Title List, and DIS-

PLAY, which allows you to change the playing status of disc during play.

SETUP/DISC/CD menu

Press SETUP button to display the setup main menu, then choose either of SETUP/DISC/CD by pressing s /B

buttons.Then, press ENTER button to display each menu. This provides entries to all main functions of the unit.

"SETUP" is available only

in the Stop mode.

"CD" is available only

when an Audio CD disc or

a CD-R/RW disc with MP3

files is inserted into the

unit.

"DISC" can be only selected when a

DVD-R/RW disc is inserted into the unit.

When a prerecorded DVD Video disc, a

new DVD-R disc or the finalized DVD-R

disc is inserted into the unit, you cannot

select "DISC".

Setup Menu

Setup

Disc Setting

CD Playback Mode

Disc

Edit

Random Play

Program Play

Format

Finalize

Disc Protect OFF ON

1 2 3 4

1 2

Playback Setting

1. Playback:

1. Edit:

1. Random Play:

To set up the unit to play discs to

your preference.

2. Recording:

To set up the unit to record to

Turns on a title list, (when a disc

with VR mode is inserted,

'Original' or 'PlayList' is available),

which shows the recorded titles

on the disc.

To set the random CD tracks play-

back.

2. Program Play (Audio CD

only):

To activate the programmed play-

discs or VHS tape.

3. Display:

2. Format:

back of CD tracks.

To set up the OSD screen.

Allows you to erase all of the

4. Select Video:

recorded content on the disc. The

To choose a line input to record to DVD disc will be completely blank.

discs or VHS tapes from other video

components.

3. Finalize:

Allows you to finalize a disc

5. Clock:

recorded titles.

To set up the clock.

6. Channel:

To preset the TV channels.

4. Disc Protect (VR mode only) :

Allows you to protect a disc from

accidental editing or recording.

You will need to finalize the DVD discs before they can be played in other DVD players.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

ASY DVD RECORDING

The following will help you to understand easily how to record to DVD discs.

NOTE:

• Make sure that you have completed connections and batteries should be inserted in the remote control.

Step 1: Choose a disc

type

Step 3: Select the

Recording

speed

Step 2: Insert a

blank

disc

There are several types of DVD disc

recordable to choose from. Choose an

applicable type by "DVD disc types" on

this page.

This unit can record on the following

type of discs only.

Turn on the unit

To select the recording

speed, press REC

SPEED button once,

then change the record-

Open the disc tray

Close the disc tray

K L

ing speed using

buttons.

Remote Control

(or)

* This unit cannot record on the follow-

ing discs.

• DVD-R General Ver 2.0 / 8x

• DVD-RW Ver 1.2 / 2-4x CPRM com-

patible

For example, when you want to

record repeatedly on the same disc

or when you want to edit the disc

after recording, select the rewritable

DVD-RW type disc.

SP 1:01 Rem.

When you want to save recordings

without any alteration, a non-

rewritable DVD-R can be your choice.

NOTE:

• This operation may take a

few minutes to complete.

DVD disc types

Important

: Most suitable.

You want to

Record TV programs

: Can be used.

: Some functions are limited.

: Cannot be used.

Format the disc

DVD-RW VR

DVD-RW Video

DVD-R

Insert the disc in the unit,

then format the disc from

SETUP menu. Video format

(Video mode) or Video

Reuse by deleting unwanted contents

Edit recorded contents

Edit/Record from connected equipment

Copy discs for distribution

recording format (VR mode)

will be available depending

on the disc type inserted.

This is necessary to prepare

the disc for recording. Details

are on pages 48-49.

* When you format, the

entire contents on that disc

will be erased.

Play on other DVD equipment

Features

Recording

Rewritable?

DVD-RW VR

DVD-RW Video

DVD-R

Yes

Can create chapters at fixed intervals (auto.)

Can create chapters wherever you like (manual)

Can record 16:9 size pictures

Yes

Can record Copy-Once programs

Editing

Can perform basic edit functions

Yes

Finalize the disc

After recording, you will need

to finalize the DVD discs

recorded in this unit before

they can be played in other

DVD players. See page 54.

Can perform advanced edit functions (Playlist edit)

DVD-RW (VR mode) can only be played on

DVD equipment that is VR compatible.

NOTE:

For details of the above functions and implied

restrictions, see the explanations inside the manual.

Download from Www.Somanuals.com. All Manuals Search And Download.

Step 4: Select the

desired

Step 5: Press DVD

RECORD

Step 6: Stop the

Recording

channel

button

58%

Writing to Disc

DISC

NOTE:

• This operation may take a few

minutes to complete.

CH 1

DISC

Playing the recorded contents

You can select the title you want to play from a displayed menu

and immediately start to play. Recorded contents are very accessi-

ble on a disc, the procedure is really simple as you choose a title

on a chapter from the menu screen.

Start Rec.

Title 1

Stop/Start

Stop Rec.

Title 2

What are titles and chapters?

The contents of DVD disc are generally divided into titles. Titles

may be further subdivided into chapters.

Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2

Editing the recorded disc

You will find editing discs very easy. This unit offers convenient edit functions, which are possible

only with DVD-R/RW discs.

You can edit the following from a Title list.

• Naming titles

• Setting pictures for thumbnails (VR mode)

• Setting/clearing chapter markers

• Deleting title part or scene (VR mode)

Title Delete : This deletes an entire scene permanently from the disc.

Scene Delete : This allows a user to edit within a specific scene (ex. commercials).

Original and Playlist (VR mode)

You can edit the recordings in Playlist without changing the original recordings. Any Playlist

does not take up much disc space.

What "Original" or "Playlist" is for?

Throughout this manual, you will find Original and Playlist to refer to the actual content and the

edited version.

• Original content refers to what's actually recorded on the disc.

• Playlist content refers to the edited version of the disc; how the Original content is to be played.

Finalize the Disc

• This will allow a disc that is recorded on our unit to be played back on a different DVD player

without finalization it will not be playable on another player.

• After finalizing a disc if the recording was in video mode, you can not edit any information that

is on that disc.

• If you have recorded in VR mode on DVD-RW disc then editing is still permitted after finalizing.

See page 54.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

ECORDING

About DVD Recording

Disc type Disc format Functions

Video mode

This unit can record to DVD-R and DVD-RW discs. When

recording, you will need to select a recording format between

Video mode and VR mode depending on the disc format.The

disc format for DVD-R is always "Video format," so a recording

format will be "Video mode". On the other hand, when record-

ing to DVD-RW, a recording format will be "Video mode" or

"VR mode" because a disc format is available between "Video

Recording format" and "Video format" for DVD-RW.

Playing, limited recording,

limited editing

DVD-RW (Video)

VR mode

DVD-RW DVD-RW (VR)

Playing, recording,

Original/Playlist editing

Video mode

DVD-R

Playing, limited recording,

limited editing

DVD-R

Logo

Attributes

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

Recording Speed

You can select a recording speed among 6 options.

The recording time depends on the recording speed

you select as follows:

DVD-RW

12cm, single-sided, single layer disc

Approx. max. recording time (SEP mode):

600 minutes (4.7GB)

Recording Recording

Video/Sound Quality

speed

time *

DVD-R

(Highest)

XP (1H)

60 min

* This unit cannot record on the following discs.

•DVD-R General ver 2.0/8x

•DVD-RW ver 1.2/2-4xCPRM compatible.

SP (2H)

LP (4H)

EP (6H)

120 min

240 min

360 min

Important

Video mode / VR (Video Recording) mode

SLP (8H) 480 min

Video Format

Select the Video Recording Mode to record discs that can

played back on most standard DVD players. Video Recording

Mode creates discs compatible with most DVD players, but

there is no capability to edit the recordings. DVD-R discs can

only be formatted in the Video mode, DVD-RW discs can be

formatted in the Video mode or the VR mode.

(Lowest)

SEP (10H) 600 min

* This table is designed for a new single-sided 12cm

disc as the standard. The recording time shown

above may differ from actual recording time.

VR Format

* The audio and video quality is poorer as the

recording time becomes longer.

Select the VR Recording Mode to record discs that can

be edited, but can be played back only on DVD recorders

and players that support the VR mode with DVD-RW

discs. DVD-R discs cannot be formatted in the VR mode,

only DVD-RW discs can be formatted in the VR mode.

* Discs recorded in SLP or SEP on this recorder

may not be playedback on other DVD recorders or

DVD players.

DVD players with

can play DVD-RW

recorded in VR mode.

NOTE:

• This unit cannot record CD-R or CD-RW discs.

•

DVD-R/RW and CD-R/RW discs recorded on a personal computer or

a DVD or CD recorder may not be played in this unit if the disc is dam-

aged or dirty or if there is dirt of condensation on the units lens.

• Even if you record a disc using a personal computer in a

compatible format, you may not play it in this unit due to the

application software used to create the disc. (Check with the

software distributor for more detailed information.)

• Discs recorded in Video mode on this unit cannot be record-

ed additionally using other DVD recorders.

Download from Www.Somanuals.com. All Manuals Search And Download.

Restrictions

Formatting

You cannot record copy-protected video using this

unit. Copy-protected video includes DVD-Video

discs and some satellite broadcasts. If copy-protect-

ed material is encountered during a recording, the

unit will pause or stop automatically and an error

message will be displayed on-screen. "Copy-once

only" video can be recorded only using a DVD-RW

disc in VR mode with CPRM (see below). When

recording a TV broadcast or through an external

input, copy control information can be displayed on

screen.

Format Setting

DVD-RW (Video) DVD-RW (VR)

When inserting a blank disc, the unit starts to initialize

the blank disc. After that, you can record to the disc in

the recording format selected in SETUP menu. You

can set a specified time for chapter marks.

NOTE:

• The recording format setting is available only for DVD-RW

discs. You cannot change the recording format on a DVD-R

disc. DVD-R discs will always be in Video mode.

• You cannot mix two formats on one DVD-RW disc. When you

load a disc once recorded before, the recording format can-

not be changed even if you change it in SETUP menu.

What is "CPRM"?

CPRM is a copy protection system with scramble

system regarding the recording of "copy once"

broadcast programs. CPRM stands for Content

Protection for Recordable Media. This unit is

CPRM compatible, which means that you can

record copy-once broadcast programs, but you

cannot make a copy of those recordings. CPRM

recordings can only be made on DVD-RW discs

formatted in VR mode, and CPRM recordings can

only be played on players that are specifically

compatible with CPRM.

• When inserting a blank DVD+R or DVD+RW disc, the error

message ("Disc Error") will appear. This unit is not compati-

ble with a DVD+R/RW disc.

• PLAYLIST will be created automatically when recording on

DVD-RW in VR mode.

SETUP

ENTER

Copy Control

Some satellite broadcasts include copy-protected

contents. Refer to the following condition on copy

control.

Copy-

prohibited

1 Press SETUP button to display SETUP/DISC

Disc type / format

Copy-free Copy-once

menu.

ver.1.1

DVD-RW

SETUP/DISC menu will appear.

ver.1.1 CPRM compatible

ver.1.1

2 ^{Select "SETUP" using}

buttons, then press

Video

DVD-RW

ENTER button.

ver.1.1 CPRM compatible

SETUP menu will appear.

ver.2.0

DVD-R

3 ^{Select "Recording" using}/ / / buttons, then

Recordable

Not Recordable

press ENTER button.

Recording menu will appear.

K L

4 Select "DVD-RW Recording Format" using

buttons, then press ENTER button.

Option window will appear.

Setup > Recording

DVD

Video mode

VR mode

DVD-RW Recording Format

Auto Chapter

VR mode

10 minutes

Timer Programming

Video mode

DVD Player Compatibility mode.

VR mode

Editing possibility mode.

Video mode has been selected as the default.

Continue on next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

RECORDING

Reformatting

K L

5 Select "Video mode" or "VR mode" using

buttons, then press ENTER button.

DVD-RW (Video) DVD-RW (VR)

The recording mode will be set.

If you are using a DVD-RW disc, by default it will be

Video mode.

K L

6 ^{Select "Auto Chapter" using}

buttons, then

You can change this to VR mode from SETUP

menu.

press ENTER button.

Option window will appear.

Caution: Erasing - Reformatting

• Reformatting will erase the contents of the disc. Once

erased, the material cannot be retrieved.

Setup > Recording

DVD

DVD-RW Recording Format

Auto Chapter

VR mode

OFF

5 minutes

10 minutes

15 minutes

VCR DVD

30 minutes

Timer Programming

60 minutes

SETUP

"10 minutes" has been selected as the default.

K L

7 ^{Select a desired time option using}

buttons,

ENTER

then press ENTER button.

Chapter marks will be put as you specified.

• The time for chapter marks is not accurate in

Video mode.

1 Press SETUP button to display SETUP/DISC

8 ^PressSETUP button to exit SETUP menu.

menu.

NOTE: 2 formats on same disc

SETUP/DISC menu will appear.

You cannot mix both recording formats on a single DVD disc.

NOTE: Finalize

2 Select "DISC" using

buttons, then press

You must "Finalize" all recorded discs before they can be

played on other DVD players. Without finalization, Video mode

discs cannot be played back on other DVD players, and VR

mode discs cannot be played back on other VR compatible

players. See page 54.

ENTER button.

DISC menu will appear.

3 ^{Select "Format" using}

buttons, then press

ENTER button.

Option window will appear.

* VR mode only

Disc

Edit

Format

Finalize

Disc Protect OFF ON

Yes

4 ^{Select "Yes" using}

buttons, then press

ENTER button.

Option window will appear.

* VR mode only

Disc

Edit

Format

Finalize

Disc Protect OFF ON

Yes

Are you sure?

Yes No

Download from Www.Somanuals.com. All Manuals Search And Download.

Basic Recording

5 Select "Yes" using

buttons, then press

ENTER button.

Recording TV Programs

Formatting will start.

DVD-R DVD-RW (Video) DVD-RW (VR)

Follow the steps below to record TV programs.

NOTE:

• Select "No" to cancel formatting.

CHANNEL

Number

58%

Formatting

6 Formatting is complete.

REC SPEED

100% will be indicated.

DVD RECORD

PAUSE

STOP C (DVD)

1 ^{Turn on the unit and load a recordable disc.}

NOTE:

100%

Formatting

• This operation may take a few minutes to complete.

NOTE:

2 ^PressREC SPEED button, then change the

• This operation may take a few minutes to complete.

K L

recording speed using

buttons.

SP 1:01 Rem.

Refer to "Recording speed" on page 48.

3 Make sure that the recording format is set to the

desired mode.

Refer to "Formatting" on pages 49-50.

When a DVD-RW disc is loaded:

Choose Video mode or VR mode from SETUP

menu. "Video mode" has been selected as the

default. Refer to "Format Setting" on pages 49-

50.

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

NOTES:

• If the clock has not been set, the space for a date

and time of title names in the original or playlist

will be blank.

• You cannot mix two formats on one DVD-RW

disc. When you load a disc once recorded before,

the recording format cannot be changed even if

you change it in SETUP menu.

Continue on next page.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

RECORDING

Checking the recording picture quality

4 Select a desired channel to record using CHAN-

K L

NEL

buttons or Number buttons.

DVD-R DVD-RW (Video) DVD-RW (VR)

You can confirm the recording speed you have

selected before recording to a DVD disc.

CH 1

5 Press DVD RECORD button to start recording.

NOTE:

REC

MONITOR

• Recording starts immediately and continues until the disc is

full or you stop recording.

REC SPEED

DISC

I mark will be displayed for 5 seconds.

1 While the unit is in STOP or REC with a record-

able DVD disc inserted, press REC MONITOR

button.

DISC

2 ^{The TV program will be shown on the screen}

with the recording speed you have selected.

Please confirm this is the speed you wish to

record.

To pause the recording, press PAUSE F button.

Press DVD RECORD button to restart the

recording.

NOTE:

• The recording picture can be confirmed with the Rec moni-

tor function. (See "Recording Speed" on page 48.)

• You cannot change the recording speed during the REC

pause mode.

• You can change a channel during the REC pause mode.

XP 0:30 Rem

CH 18

6 Press STOP C (DVD) button to stop recording.

NOTE:

• This operation may take a few minutes to complete.

Rec Monitor

3 ^{To change the recording speed, press}REC

K L

SPEED button, then use

buttons.

The recording speed will change as you press

the button as shown.

SEP

SLP

DVD mode

NOTE:

• You cannot change the recording speed during recording.

4 Press REC MONITOR button again to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

One-Touch Timer Recording

DVD-R DVD-RW (Video) DVD-RW (VR)

This is a simple way to set the recording time in

blocks of 30 minutes. Check that the disc you are

recording onto has enough space for the time you

set.

0:30

DISC

0:30

OFF (Normal Recording) 1:00

Remote control

CHANNEL

Number

8:00

7:30

When the unit reaches the specified time, it will

turn off automatically.

NOTE: Automatic Turn Off

• The unit will turn off automatically under the following condi-

tions:

REC SPEED

Main Unit

1) No space remained on the disc.

2) When a power failure occurs.

STOP C (DVD)

• If One-Touch Timer Recording finishes in DVD during play-

back or in REC mode in VCR, the DVD will be in STOP

mode and the VCR keeps the current mode.

To cancel the one-touch timer recording within

the specified time, press STOP C (DVD) button.

C STOP

(DVD)

I RECORD

(DVD)

NOTE:

• This operation may take a few minutes to complete.

1 Turn on the unit and load a recordable disc.

Important

NOTE:

You must "Finalize" all recorded discs before

they can be played on other DVD players.

Without finalization, Video mode discs cannot be

played back on other DVD players and VR mode

discs cannot be played back on other VR com-

patible players. See page 54.

• This operation may take a few minutes to complete.

2 Press REC SPEED button, then change the

K L

recording speed using

buttons.

Refer to "Recording speed" on page 48.

3 Make sure that the recording format is set to the

desired mode.

Refer to " Format Setting " on pages 49-50.

When a DVD-RW rewritable disc is loaded:

Choose Video mode or VR mode from SETUP

menu.

"Video mode" has been selected as the default.

Refer to " Format Setting" on pages 49-50.

When a DVD-R disc is loaded:

DVD-R discs will always be in Video mode.

4 Select a desired channel to record using CHAN-

K L

NEL

buttons or Number buttons.

5 Press I RECORD (DVD) button on the main

unit repeatedly until a desired recording time (30

minutes to 8 hours) appears on the TV screen.

Recording will start.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

RECORDING

You cannot cancel finalizing the DVD-R disc once it

starts.

Finalizing Discs

DVD-R DVD-RW (Video) DVD-RW (VR)

SETUP

You must "Finalize" all recorded discs before they

can be played on other DVD players. Without final-

ization, Video mode discs cannot be played back on

other DVD players, and VR mode discs cannot be

played back on other VR compatible players.

ENTER

STOP C (DVD)

Press SETUP button to display SETUP/DISC menu.

Finalizing*

SETUP/DISC menu will appear.

2 Select "DISC" using

buttons, then press

ENTER button.

Playable

DISC menu will appear.

DVD player

K L

3 ^{Select "Finalize" using}

buttons, then press

Not Playable

ENTER button.

This Unit

Option window will appear.

Disc

Edit

*You cannot finalize discs in other DVD recorders.

Format

Finalize

Disc Protect OFF ON

Yes

Finalizing may take several minutes up to an hour.

(A disc recorded in Video mode can take up to 15

minutes. A disc recorded in VR mode can take up to

60 minutes.)

* VR mode only

A shorter recording period on the disc will require a

longer time period for finalization. Do not unplug the

power cord during finalization.

4 ^{Select "Yes" using}

buttons, then press

ENTER button.

Finalizing will start.

After finalizing:

• Once DVD-R/RW (Video mode) is finalized, you

cannot record additionally or edit.

• Even if DVD-RW (VR mode) is finalized, you can

record additionally to or edit.

58%

Finalizing

• When DVD-R/RW (Video mode) is finalized, title

menu will be created automatically.

NOTE: Finalizing

• This operation may take a few minutes to complete.

•

Finalizing discs in Video mode automatically create title menus.

To play in other DVD players, finalize discs

recorded on this unit with the following condi-

tion.

• Once you have finalized a disc recorded in Video mode, you

cannot edit or record any contents on that disc.

Discs recorded in VR mode can still be recorded and edited

on this unit even after finalized.

• To cancel finalizing, press STOP C (DVD) button. Select

"Yes" using s/B buttons, then press ENTER button.

Disc type

Mode

DVD-R

ver.2.0

• When you insert a DVD-RW disc finalized with this unit,

"Undo Finalize" will appear instead of "Finalize".

Video mode

DVD-RW

Disc

ver.1.1

Video mode

VR mode

Edit

Format

ver.1.1 CPRM compatible

Undo Finalize

To release the finalizing for the disc, select "Undo Finalize"

at step [3].

• If

appear when pressing STOP C (DVD) button, you

cannot cancel finalizing because the finalizing has been in

certain progress.

When selecting "No", press ENTER or RETURN button,

finalizing will be continued.

Download from Www.Somanuals.com. All Manuals Search And Download.

TO CANCEL THE DISC PROTECT :

• When you insert a disc protected with this unit, “Disc Protect

Protecting Discs

ON ➔ OFF” will appear instead of “OFF ➔ ON”.

DVD-RW (VR)

Disc

To prevent accidental recording, editing or erasing

the titles, you can protect them.

Edit

Format

Finalize

Disc Protect ON OFF

Yes

SETUP

To release the protect for the disc, select “Disc Protect ON

➔ OFF” at step [3], then select “Yes”.

ENTER

1 ^PressSETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

2 Select "DISC" using

buttons, then press

ENTER button.

DISC menu will appear.

K L

3 Select "Disc Protect OFF ➔ ON" using

but-

tons, then press ENTER button.

Option window will appear.

Disc

Edit

Format

Finalize

Disc Protect OFF ON

Yes

4 Select "Yes" using

buttons, then press

ENTER button.

A disc will be protected.

58%

Writing to Disc

NOTE:

• This operation may take a few minutes to complete.

• The Disc Protect setting is available only when a disc with

VR mode is inserted.

• You can only select Disc Protect Menu when a protected

disc is inserted.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

RECORDING

Recording from External Video Products

Connecting to External Video Products

Connections

DVD-R DVD-RW (Video) DVD-RW (VR)

VCR

Before recording from an external video product,

see the instructions for the connection in the previ-

ous section, “Connections”.

Connect the external video products properly to the

unit by using input jacks on the front of this unit.

Use S-Video or video cable and an audio cable for

this connection.

CHANNEL

OUTPUT

Other devices

S- VIDEO

VIDEO AUDIO

(ex.VCR camcorder etc.)

Video

cable

Audio

cable

DVD RECORD

REC SPEED

VCR RECORD

STOP C (DVD)

S-Video

cable

STOP C (VCR)

S-VIDEO

Recording

onto DVD

only

1 Turn the unit on.

2 When you want to record onto a DVD:

Press

OPEN/CLOSE button on the main unit

to open the disc tray, then place the disc to

To record onto a

VHS tape, use the

VIDEO input.

record properly, then press

OPEN/CLOSE

button again to close the disc tray.

NOTE:

• This operation may take a few minutes to complete.

1 Press SETUP button to display SETUP/DISC

When you want to record to a tape:

menu.

Insert the tape with a safety tab into the cassette

compartment.

2 ^{Select "SETUP" using}

buttons, then press

ENTER button.

3 Select the external input mode (“AUX” or “S”)

K L

using CHANNEL

buttons.

3 Select "Select Video" using / / / buttons,

then press ENTER button.

4 Press REC SPEED button (For VCR, press REC

SPEED button twice), then change the recording

Setup > Select Video

Line

DVD

AUX

K L

speed using

buttons until your desired speed

is displayed. Refer to "Recording Speed" on page

48 for DVD or page 28 for VCR.

Press ENTER button.

Option window will appear.

SLP

SEP

SLP

DVD mode

VCR mode

4 ^{Select the input jack type to connect using}

buttons, then press ENTER button.

5 ^PressDVD RECORD button or VCR RECORD

If you want to use S-VIDEO INPUT, select "S".

button to start recording.

If you want to use VIDEO INPUT (Composite),

select "AUX".

Press PLAY button on the external video product.

7 For disc:

Setup > Select Video

Line

DVD

Video In

AUX

Press STOP C (DVD) button to stop recording.

NOTE:

• This operation may take a few minutes to complete.

For tape:

5 Press SETUP button to exit.

Press STOP C (VCR) button to stop recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

UBBING

DVD-R DVD-RW (Video) DVD-RW (VR)

VCR

You can copy a DVD disc to a videotape or copy a

videotape to a DVD disc. This function will be possi-

ble only if the DVD disc or the tape is not copy pro-

tected. Before starting this function, prepare for the

recording on the DVD-R/RW disc or the videotape.

Refer to pages 48-55, 28-30.

NOTE: Load Recording Media

• Insert a DVD disc or videotape with the available recording

space.

REC SPEED

STOP C (DVD)

STOP C (VCR)

VCR DVD

VCR to DVD

DVD to VCR

The DVD recording speed and format should be

selected first. Refer to "Recording" on page 48 and

"Formatting" on pages 49-50.

The tape's record tab should be intact.

The videotape should have enough available space

to record the DVD disc.

1 Press REC SPEED button first, and select a

1 ^PressREC SPEED button twice and select a

K L

recording speed using

buttons.

K L

recording speed using

buttons.

2 Press VCR

DVD button on the remote control

or on the main unit.

2 ^PressVCR

DVD button on the remote control

or on the main unit.

VCR to DVD duplication will start.

DVD to VCR duplication will start.

3 Press STOP C (DVD) or STOP C (VCR) button

on the remote control or on the main unit to stop

the recording.

3 ^PressSTOP C (DVD) or STOP C (VCR) button

on the remote control or on the main unit to stop

the recording.

NOTE:

NOTE: DVD Dubbing

• After starting VCR to DVD duplication, the picture may be

distorted because of the auto tracking function. This is not a

malfunction. Be advised to playback the tape until the pic-

ture is stabilized, then set the starting point you wish to start

recording, and start VCR to DVD duplication.

• Duplicating operation from DVD to VCR is only available

when DVD stops or during DVD playing, and when VCR

stops.

• You cannot make a dub from a DVD disc protected by copy-

right, such as a prerecorded DVD.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

IMER RECORDING

Timer Recording

6 Enter the date using K/L buttons, then press

DVD-R DVD-RW (Video) DVD-RW (VR)

VCR

button.

Setup > Recording > Timer Programming

You can program up to 7 programs 1 year in

advance. Daily or weekly program recordings are

also available.

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Date

Start

End

JAN / 01 - - : - -AM - - : - -AM CH8 DVD

- - -

e.g. January 1st

NOTE:Time must be set

• Be sure to set the clock before making a timer programming.

NOTE:

• Insert a recordable disc or a tape with a safety tab.

• When pressing L button at the current date, timer recording

mode will change as follows:

POWER

JAN/01

Daily

MON-SAT

MON-FRI

SAT

TIMER PROG.

SETUP

FRI

ENTER

SUN

DEC/31

1 ^PressSETUP button to display SETUP/DISC

menu.

K L

7 ^{Enter the time to start and to end using}

but-

SETUP/DISC menu will appear.

tons, then press button.

2 ^{Select "SETUP" using}

buttons, then press

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

ENTER button.

Date

Start

End

JAN/01 10 :00PM - - : - -AM CH8 DVD

- - -

SETUP menu will appear.

NOTE:

3 Select "Recording" using / / / buttons, then

• Press s or B buttons to move the cursor to the left and the

press ENTER button.

right in the timer programming menu.

Recording menu will appear.

8 ^{Select the channel number to record using}

K L

buttons, then press button.

4 Select "Timer Programming" using

buttons,

then press ENTER button.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Timer Programming list will appear.

Date

Start

End

JAN/01 10:00PM 10:30PM CH8 DVD

- - -

NOTE:Timer Program Menu

• Timer Programming menu can also be selected by pressing

• To record from external input, select “AUX”.

TIMER PROG. button. In this case, continue with step [5].

• If you have not set the clock yet:

A clock setting window will appear after step [4]. Before

making a timer programming, press ENTER button then fin-

ish setting the clock, referring to the step [5] in "Manual

Clock Setting" on page 19.

9 Select a recording media using

buttons,

then press button.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Date

Start

End

Setup > Recording > Timer Programming

JAN/01 10:00PM 10:30PM CH8 DVD

- - -

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Date

- - -

Start

End

• To record on to a tape, select VCR.

• To record on to a disc, select DVD.

K L

5 ^{Select the blank program using}

buttons,

then press ENTER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

Checking, canceling, or correcting the timer pro-

gramming information

10 Select a recording speed using K/L buttons.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Date

Start

End

JAN/01 10:00PM 10:30PM CH8 DVD 1H

- - -

POWER

Refer to "Recording speed" on page 48 for DVD

or page 28 for VCR.

TIMER PROG.

CLEAR

• If you set Recording speed to “Auto” at step

[10], this unit will automatically adjust the

recording speed so that the program will fit into

one disc.

(You can select “Auto” in the first program only.)

ENTER

11 Press ENTER button when all information

1 Press POWER button.

required is entered.

Your program setting will be entered.

• To set another program, repeat steps [5] to [11].

• To exit, press SETUP button.

2 ^PressTIMER PROG. button. Timer Programming

list will appear.

Setup > Recording > Timer Programming

JAN / 1/ 2004 (THU) 12 : 00 PM

DVD

Speed

VCR

Date

Start

End

JAN/01 10:00PM 10:30PM CH8 DVD 1H

- - -

12 Press POWER button to turn off.

Important

When you set the timer program in either DVD

mode or VCR mode, RECORD indicator (DVD)

will illuminate on the front of the TV. See item

No.19 on page 7.

3 Check the information.

4 To clear the timer programming, select your

desired program using

buttons, then press

CLEAR button.

NOTE:

• If power is not turned off and you continue watching TV,

“TIMER REC STANDBY” starts flashing on the TV screen 2

minutes before the programmed start time. In this case,

press POWER button to turn off to activate the timer record-

ing.

To correct the timer programming, select your

desired program using

ENTER button.

buttons, then press

Next, correct the timer programming using

• You may turn on the unit once the timer recording has start-

ed.

/ / / buttons.

Finally, press ENTER button again.

5 Press TIMER PROG. button to exit.

6 Press POWER button to return to the timer

standby mode.

NOTE:

• Press TIMER PROG. button to check the timer programming

in process.

When the timer recording is in process, that program will be

highlighted in red. In this case, you cannot select any other

program.

To stop the timer recording in process

Press POWER button first to turn on the unit. Then,

on the front panel of the unit, press STOP C (DVD)

button to stop the recording or C STOP/A EJECT

to stop the tape recording. STOP C button on the

remote control does not work for timer recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

TIMER RECORDING

Suggestions for Timer Recording

• If there is a power failure or this unit has been unplugged for more than 3 seconds, the clock setting and all timer settings will be lost.

• If a disc is not on the tray, timer recording cannot be performed. Please insert a recordable disc.

• If a tape with a record tab is not in the cassette compartment, timer recording cannot be performed. Please insert a recordable tape.

See "Accidental erasure prevention" on page 28.

• The main unit automatically ejects a tape without a record tab inserted in the compartment when you turn off the power and move to

timer standby mode.

• When all the timer recording is completed, the RECORD indicator disappears. To play the recorded disc (or the tape), press POWER

button first and then press PLAY B (DVD) or PLAY B (VCR). To eject the recorded disc (or the tape), press

OPEN/CLOSE (or

STOP/ EJECT) button.

• The timer recording is not performed in DVD and VCR at the same time. If you set two programs with the same channel and time both

in DVD and VCR, the program that has priority will be recorded.

• During timer recording or timer standby (RECORD indicator is on the front display), any operations on the unit will not be available. To

make these operations available, cancel the timer recording or timer standby first (RECORD indicator disappears).

• To cancel the timer standby mode, press POWER button.

• When the Start and the End time are the same, the length of the recording will be set for 24 hours. When the disc reaches at the end

during the recording, the unit turns itself off.

• When the programmed Start and End time are earlier than the current time, the recording will be set on the same date in the next year.

• If your programmed Start time for DVD recording is within 2 minutes from the current time, the power will turn on for recording standby

right after you turn the power off. For a videotape recording, the power will turn on shortly before the Start time.

• If a videotape ends during timer recording, the unit will stop, eject the videotape and turn itself off.

• When two or more programmings are overlapped, "Overlap" will be displayed.

The priority of overlapped settings

This unit records the programs according to priority if the timer programs are overlapped. The timer program set first is given priority.

A timer recording of lower priority will be canceled, begin from the middle or stopped at the end.

Check the overlapped timer programs and change the priority if necessary.

A programming set previously has priority

When some programming have been

made at the end time of the

programming currently being recorded:

A program set previously (PROG. B) has priority.

When the starting time is the same:

A program set previously (PROG.A) has priority.

ex.1

ex. 2

PROG.A

PROG. B

PROG.A

PROG. B

PROG. C

Actual

recording

Actual

recording

PROG.A

PROG. B

PROG.A

PROG. B

When the recording time is partially overlapped:

PROG. A will start after PROG. B is complete to be recorded.

When the recording time is entirely overlapped:

PROG. A will not be recorded.

PROG.A

PROG. B

Actual

recording

Actual

recording

PROG. B

PROG.A

PROG. B

Note for DVD timer recording

Example:

• When the recording time

of two programs are over-

lapped or the End time of

a program and the Start

time of another is the

same, the first 20-90 sec-

onds of the subsequent

program will be cut off.

When the end time of the programming currently

being recorded and the starting time of the one to be recorded

sequentially are same:

PROG.A

PROG. B

Actual

PROG.A

PROG. B

recording

The first 20-90 seconds will be cut off.

Download from Www.Somanuals.com. All Manuals Search And Download.

DITING DISCS

Editing in Video Mode

About Disc Editing

You can edit the following items for discs in Video

mode. Be sure that once you edit titles, they will not

remain as recorded originally.

Title List

Title list allows you to check the titles recorded on

the disc easily. You can choose a title to edit from

this screen and easily edit the titles as you prefer.

• Deleting titles (Refer to page 62)

• Putting names on titles (Refer to page 63)

•

Setting or clearing chapter markers (Refer to page 63)

Disc > Edit > Original

NOTE: Finalized Discs

• Once a disc is finalized, editing the disc or recording to the

disc will not be available. (Except DVD-RW discs in VR

mode.)

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

• A playlist is not available with the DVD-R discs and DVD-RW

discs in Video mode.

JAN/1 6:00AM

JAN/1 4:00AM

JAN/1 5:00AM

Editing in VR Mode

For discs in VR mode, you can edit from "Original"

menu or "Playlist" menu, which is created from the

original.

Disc > Edit > Original

Title Delete

Scene Delete

Editing original titles

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

The following operations can be used to edit the

original titles.

JAN/1 1:00AM CH12 XP

-Deleting titles (Refer to page 64)

0:01:25

-Deleting parts of titles (Refer to page 65)

-Putting names on titles (Refer to page 65)

-Setting or clearing chapter markers (Refer to page 66)

-Setting pictures for thumbnails (Refer to page 66)

-Setting titles to protect (Refer to page 67)

-Releasing titles from protecting (Refer to page 67)

Editing playlists

8 7

1. Titles recorded on the disc can be selected to

edit by pressing ENTER button with the cursor on

the title.

2. Protect icon, which appears when the title has

been protected.

3. The arrow icon, which means the title list includes

a next or a previous page. Press ^Bor s button by

following direction of the icon.

You can create a playlist from original titles, so that

you can edit as you prefer without losing original

titles. The following operations you can edit with a

playlist.

4. The menus for editing titles as you prefer. The

available menu depends on the disc type and the

format type.

-Deleting titles (Refer to page 68)

-Deleting parts of titles (Refer to page 69)

-Putting names on titles (Refer to page 69)

-Setting or clearing chapter markers (Refer to page 70)

-Setting pictures for thumbnails (Refer to page 70)

-Adding titles to a playlist (Refer to page 71)

-Deleting a playlist (Refer to page 71)

5. The details of the title, which can be changed to

the title name you will edit.

6. Time status bar of the title.

7. The selected title thumbnails from the title list.

8. Playback status of the current disc.

NOTE: Original Titles

• Original titles once edited will not remain as recorded origi-

nally. When you want to leave the original as it is, edit the

playlist as you prefer. (Refer to pages 68-71.)

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

EDITING DISCS

Editing Discs in Video Mode

K L

4 Select "Title Delete" using

buttons, then

press ENTER button.

Deleting Titles

Option window will appear.

DVD-R DVD-RW (Video)

Disc > Edit

Caution:

Title Delete

Edit Title Name

Chapter Mark

You can delete titles that you do not need anymore.

The titles once deleted cannot be recovered to the

disc. When the last title in the title list in Video mode

is deleted, the disc space to record will be

increased. For DVD-R disc, the disc space to record

will not be changed.

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

5 ^{Select "Yes" using}

buttons, then press

ENTER button.

Title will be deleted.

SETUP

NOTE:

• This operation may take a few minutes to complete.

6 After writing to disc is completed, press SETUP

ENTER

button to exit DISC menu.

1 Press SETUP button. Select "DISC" using

buttons, then press ENTER button.

DISC menu will appear.

Disc

Edit

Format

Finalize

K L

2 ^{Select "Edit" using}

buttons, then press

ENTER button.

Title list will appear.

Disc > Edit

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

3 Select a desired title using / / / buttons,

then press ENTER button.

Edit menu will appear.

Disc > Edit

Title Delete

Edit Title Name

Chapter Mark

JAN/ 1 1:00AM CH12 XP

0:01:25

• You cannot select “Chapter Mark” when a DVD-R

disc is inserted into this unit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Naming Titles

Setting Chapter Markers

DVD-R DVD-RW (Video)

DVD-RW (Video)

You can name the titles and change the names from

this menu.

You can put chapter markers in each title. Once a

chapter is marked, you can use it for the chapter

search.You can set chapter markers at a specified

time you selected for titles with more than 5 minutes.

The title names will be displayed on a Title List.

SETUP

NOTE:

•

You cannot select a time for putting markers beyond a length of a title.

When recording at the recording speed other than XP or SEP, the

length of chapters may be slightly longer or shorter than the one spec-

ified at the step [2].

ENTER

•

A chapter marker may be delayed according to the recording content.

Follow the steps [1] to [3] on page 62 to display the

Edit menu.

SETUP

K L

1 ^{Select "Edit Title Name" using}

buttons, then

press ENTER button.

A window for entering a title name will appear.

ENTER

Disc > Edit > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

Follow the steps [1] to [3] on page 62 to display the

Edit menu.

JAN/ 1 1:00AM CH12 XP

0:01:25

K L

1 ^{Select "Chapter Mark" using}

buttons, then

press ENTER button.

2 To enter a title name, follow the steps shown in

"Guide to edit title name" below.

Option window will appear.

Disc > Edit > Edit Title Name

Disc > Edit

A B C

a b c

1 2 3

@ ! ?

Title Delete

OFF

character set

Edit Title Name

5 minutes

Chapter Mark

10 minutes

15 minutes

30 minutes

60 minutes

area for enter-

ing title names

JAN/ 1 1:00AM CH12 XP

0:01:25

When you finish entering a title name, press

ENTER button.

2 Select a desired time using K/L buttons, then

[

]

press ENTER button.

Guide to edit title name

Select

ABC

abc

123

@ ! ?

Option window will appear.

Press

[

]

Step1 : Select a desired character set using

<space>

L buttons, then

A B C

a b c

1 2 3

@ ! ?

! ” # $ %

press ENTER button.

Disc > Edit

( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

Title Delete

OFF

5 minutes

Chapter Mark

10 minutes

Edit Title Name

[

]

Step2 : Press Number buttons following by the

15 minutes

30 minutes

60 minutes

list.

ABC

DEF

abc

def

*1 Press

Yes

JAN/ 1 1:00AM CH12 XP

changed to the " @ " mode automatically.

*2 Press

GHI

ghi

0:01:25

will be changed to the previous input mode

automatically.

JKL

jkl

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

・

To delete letters, press CLEAR button

repeatedly.

・To go on to the next entering area for

3 ^{Select "Yes" using}

buttons, then press

　letters, press

wxyz

・You can enter up to 30 letters.

ENTER button.

Chapter marks will be put as you specified.

3 ^{Select "Yes" using}

buttons, then press

NOTE:

ENTER button.

• This operation may take a few minutes to complete.

The name you entered will be activated for the title.

NOTE:

4 After writing to disc is completed, press SETUP

• This operation may take a few minutes to complete.

button to exit DISC menu.

4 After writing to disc is completed, press SETUP

button to exit DISC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

EDITING DISCS

Editing DVD-RW Discs in VR Mode

(Original)

4 Select a desired title using / / / buttons,

then press ENTER button.

Deleting Titles

Original menu will appear.

Disc > Edit > Original

DVD-RW (VR)

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

When a title is deleted from an original list in VR

mode, the disc space to record will be increased.

JAN/ 1 1:00AM CH12 XP

Caution:

0:01:25

Be advised that the titles once deleted cannot be

brought back to the disc.

K L

5 ^{Select "Title Delete" using}

buttons, then

press ENTER button.

Option window will appear.

SETUP

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture

Protect OFF ON

Yes

JAN/ 1 1:00AM CH12 XP

ENTER

0:01:25

Caution:

Once erased, the material cannot be retrieved.

1 ^PressSETUP button. Select "DISC" using

6 ^{Select "Yes" using}

buttons, then press

buttons, then press ENTER button.

ENTER button.

DISC menu will appear.

Title will be deleted.

Disc

NOTE:

Edit

• This operation may take a few minutes to complete.

Format

Finalize

Disc Protect OFF ON

7 After writing to disc is completed, press SETUP

button to exit DISC menu.

K L

2 Select "Edit" using

buttons, then press

ENTER button.

Original/PlayList menu will appear.

Disc > Edit

Original

3 ^{Select "Original" using}

buttons, then press

ENTER button.

Original list will appear.

Disc > Edit > Original

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting Parts of Titles

Naming Titles

DVD-RW (VR)

You can delete part of a title so that the disc space

to record will increase.

You can name the titles and change the names from

this menu.

The title names will be displayed on a Title List.

Caution:

Be advised that the parts once deleted cannot be recovered.

SETUP

ENTER

Follow the steps [1] to [4] on page 64 to display the

Original menu.

Follow the steps [1] to [4] on page 64 to display the

Original menu.

K L

1 ^{Select "Edit Title Name" using}

buttons, then

K L

1 Select "Scene Delete" using

buttons, then

press ENTER button.

A window for entering a title name will appear.

Option window will appear.

Disc > Edit > Original > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

Disc > Edit > Original

Title Delete

Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

Delete

Index Picture

Protect OFF

JAN/ 1 1:00AM CH12 XP

0:01:25

JAN/ 1 1:00AM CH12 XP

0:00:55

2 To enter a title name, follow the steps shown in

2 ^PressENTER button to decide a start point, then

"Guide to edit title name" below.

press ENTER button to decide an end point.

Disc > Edit > Original > Edit Title Name

A cursor will move to "Preview." You can check a preview.

A B C

a b c

1 2 3

@ ! ?

character set

Start point End point

area for enter-

ing title names

JAN/ 1 1:00AM CH12 XP

Before

editing

0:01:25

When you finish entering a title name, press

ENTER button.

Edited

[

]

Guide to edit title name

Select

3 ^{Select "Delete" using K/L buttons, then press}

ABC

abc

123

@ ! ?

Press

[

]

Step1 : Select a desired character set using

<space>

ENTER button.

L buttons, then

A B C

a b c

1 2 3

@ ! ?

! ” # $ %

press ENTER button.

( ) *

Option window will appear.

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

[

]

Step2 : Press Number buttons following by the

Disc > Edit > Original

list.

Title Delete

ABC

DEF

abc

def

*1 Press

button, character set will be

Scene Delete

Start

changed to the " @ " mode automatically.

buttons, character set

Edit Title Name

End

Chapter Mark

Preview

*2 Press

GHI

ghi

Index Picture

Delete

will be changed to the previous input mode

automatically.

Protect OFF

JKL

jkl

Yes

JAN/ 1 1:00AM CH12 XP

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

・

To delete letters, press CLEAR button

repeatedly.

0:01:25

・To go on to the next entering area for

　letters, press

button.

wxyz

・You can enter up to 30 letters.

4 ^{Select "Yes" using}

buttons, then press

ENTER button.

3 ^{Select "Yes" using}

buttons, then press

ENTER button.

Part of a title will be deleted.

The name you entered will be activated for the title.

NOTE:

• This operation may take a few minutes to complete.

NOTE:

• You cannot select "Scene Delete" when the number of chap-

ter markers in the original or playlist is more than 900.

• This operation may take a few minutes to complete.

4 After writing to disc is completed, press SETUP

5 ^{After writing to disc is completed, press}SETUP

button to exit DISC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

EDITING DISCS

Setting Chapter Markers

Setting Pictures for Thumbnails

DVD-RW (VR)

You can put chapter markers in each title. Once a chap-

ter is marked, you can use it for chapter search.

You can set a picture to each title for a thumbnail. It

helps you to remember the contents of the title you

are playing. The beginning picture has been select-

ed as the default.

You can put a chapter marker anywhere you want.

NOTE:

• When the number of chapter markers in the original list comes

to 999 in total, you cannot add any more chapter markers.

SETUP

ENTER

PLAY B (DVD)

PAUSE

Follow the steps [1] to [4] on page 64 to display the

Original menu.

Follow the steps [1] to [4] on page 64 to display the

Original menu.

K L

1 ^{Select "Index Picture Set" using}

buttons.

1 ^{Select "Chapter Mark" using}

buttons, then

Use

, PLAY (DVD) and

press ENTER button.

PAUSE F buttons to decide the picture you want

to select as a thumbnail, then press ENTER but-

ton.

Option window will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Option window will appear.

Add

Delete

Chapter 1/1

Index Picture

Protect OFF ON

Disc > Edit > Original

JAN/ 1 1:00AM CH12 XP

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

0:01:25

Yes

K L

JAN/ 1 1:00AM CH12 XP

2 Select "Add" or "Delete" using

buttons, then

0:01:25

press ENTER button.

Option window will appear.

2 Select "Yes" using

buttons, then press

<Add>:

<Delete>:

ENTER button.

Disc > Edit > Original

A picture for thumbnail will be set.

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Scene Delete

Edit Title Name

NOTE:

Add

Delete

Add

Chapter Mark

Chapter 1/1

Chapter 2/2

Delete

Index Picture

• This operation may take a few minutes to complete.

Protect OFF ON

Yes

• If a selected picture for a thumbnail is deleted by deleting a

part of a title, a default picture will be selected.

JAN/ 1 1:00AM CH12 XP

0:01:25

3 ^{After writing to disc is completed, press}SETUP

• You cannot delete the first chapter marker of

each title.

button to exit DISC menu.

3 Select "Yes" using

buttons, then press

ENTER button.

A chapter marker will be added or deleted.

NOTE:

• These operations may take a few minutes to complete.

4 ^{After writing to disc is completed, press}SETUP

button to exit DISC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Protecting Titles

Releasing Title Protect

DVD-RW (VR)

To prevent accidental editing or erasing the titles,

you can protect them from the original menu.

You can release the title protection once you pro-

tected.

SETUP

ENTER

Follow the steps [1] to [4] on page 64 to display the

Original menu.

Follow the steps [1] to [3] on page 64 to display the

Original list.

K L

1 Select "Protect OFF ➔ ON" using

buttons,

1 Select a desired title using / / / buttons,

then press ENTER button.

Option window will appear.

Original menu will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect ON OFF

Yes

JAN/ 1 1:00AM CH12 XP

JAN/ 1 2:00AM CH12 XP

0:01:25

"Protect ON ➔ OFF" is selected.

2 ^{Select "Yes" using}

buttons, then press

ENTER button.

2 Press ENTER button.

Option window will appear.

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect OFF ON

Disc > Edit > Original

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Protect ON OFF

Yes

JAN/ 1 1:00AM CH12 XP

Writing to Disc

Yes

JAN/ 1 2:00AM CH12 XP

0:01:25

NOTE:

• This operation may take a few minutes to complete.

3 ^{Select "Yes" using}

buttons, then press

3 ^{After writing to disc is completed, press}SETUP

ENTER button.

button to exit DISC menu.

NOTE:

To protect a whole disc (DVD-RW VR mode Only):

• This operation may take a few minutes to complete.

Select "Disc Protect" from Disc menu, then select "Yes".

Refer to page 55.

4 ^{After writing to disc is completed, press}SETUP

button to exit DISC menu.

NOTE:Title Protection

• Once you protect the titles, other editing operations are not

available until you release the title protection.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

EDITING DISCS

Editing DVD-RW Discs in VR Mode

(Playlist)

4 Select a desired title using / / / buttons,

then press ENTER button.

Deleting Titles

Playlist menu will appear.

Disc > Edit > Playlist

DVD-RW (VR)

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

In VR mode, even when a title is deleted from a

Playlist, the original title will remain in an Original

list. The disc space to record will not increase.

JAN/ 1 1:00AM CH12 XP

0:01:25

K L

5 ^{Select "Title Delete" using}

buttons, then

press ENTER button.

SETUP

Option window will appear.

Disc > Edit > Playlist

Title Delete

ENTER

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

1 ^PressSETUP button. Select "DISC" using

6 ^{Select "Yes" using}

buttons, then press

buttons, then press ENTER button.

ENTER button.

DISC menu will appear.

Title will be deleted.

Disc

NOTE:

Edit

• This operation may take a few minutes to complete.

Format

Finalize

Disc Protect OFF ON

7 After writing to disc is completed, press SETUP

button to exit DISC menu.

K L

2 Select "Edit" using

buttons, then press

ENTER button.

Original/PlayList menu will appear.

Disc > Edit

Original

3 ^{Select "PlayList" using}

buttons, then press

ENTER button.

Playlist will appear.

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

JAN/1 4:00AM

JAN/1 5:00AM

Download from Www.Somanuals.com. All Manuals Search And Download.

Deleting Parts of Titles

Important

Naming Titles

DVD-RW (VR)

ou can name the titles and change the names from this menu.

You can delete a specific part of a title. Even when a

title is deleted from the Playlist, the original title will

remain. The disc space to record will not be increased.

The title names will be displayed on a Title List.

SETUP

ENTER

Follow the steps [1] to [4] on page 68 to display the

Playlist menu.

Follow the steps [1] to [4] on page 68 to display the

Playlist menu.

K L

1 Select "Edit Title Name" using

buttons, then

press ENTER button.

K L

1 Select "Scene Delete" using

buttons, then

A window for entering a title name will appear.

press ENTER button.

Option window will appear.

Disc > Edit > Playlist > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

Disc > Edit > Playlist

Title Delete

Scene Delete

Start

Edit Title Name

End

Chapter Mark

Preview

JAN/ 1 1:00AM CH12 XP

Index Picture

Delete

0:01:25

JAN/ 1 1:00AM CH12 XP

0:00:55

2 To enter a title name, follow the steps shown in

"Guide to edit title name" below.

2 Press ENTER button to decide a start point, then

press ENTER button to decide an end point.

Disc > Edit > Playlist > Edit Title Name

A B C

a b c

1 2 3

@ ! ?

A cursor will move to "Preview". You can check a preview.

character set

area for enter-

ing title names

JAN/ 1 1:00AM CH12 XP

Start point End point

0:01:25

Before

editing

When you finish entering a title name, press

ENTER button.

Edited

[

]

Guide to edit title name

Select

ABC

abc

123

@ ! ?

Press

K L

3 ^{Select "Delete" using}

buttons, then press

[

]

Step1 : Select a desired character set using

<space>

L buttons, then

A B C

a b c

1 2 3

@ ! ?

ENTER button.

! ” # $ %

press ENTER button.

( ) *

+ , - . / : ;

< = > ?

@ [ ] ^

_ { | }

Option window will appear.

[

]

Step2 : Press Number buttons following by the

list.

Disc > Edit > Playlist

ABC

DEF

abc

def

*1 Press

button, character set will be

Title Delete

changed to the " @ " mode automatically.

buttons, character set

Scene Delete

Start

Edit Title Name

End

*2 Press

GHI

ghi

Chapter Mark

will be changed to the previous input mode

automatically.

Preview

Delete

Index Picture

JKL

jkl

MNO

PQRS

TUV

WXYZ

mno

pqrs

tuv

・

To delete letters, press CLEAR button

repeatedly.

Yes

JAN/ 1 1:00AM CH12 XP

・To go on to the next entering area for

0:01:25

　letters, press

button.

wxyz

・You can enter up to 30 letters.

4 Select "Yes" using

buttons, then press

3 Select "Yes" using

buttons, then press

ENTER button.

Part of a title will be deleted.

The name you entered will be activated for the title.

NOTE:

• This operation may take a few minutes to complete.

• You cannot select "Scene Delete" when the number of chap-

ter markers in the original or playlist is more than 900.

4 ^{After writing to disc is completed, press}SETUP

5 After writing to disc is completed, press SETUP

button to exit DISC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

EDITING DISCS

Setting Chapter Markers

Setting Pictures for Thumbnails

DVD-RW (VR)

You can put chapter markers in each title. Once a chap-

ter is marked, you can use it for the chapter search.

You can set a picture to each title for a thumbnail. It

helps you to remember the contents of the title you

are playing. The beginning picture has been select-

ed as the default.

You can put a chapter marker anywhere you want.

NOTE:

• When the number of chapter markers in the original list comes

to 999 in total, you cannot add any more chapter markers.

SETUP

ENTER

SETUP

ENTER

PLAY B (DVD)

PAUSE

Follow the steps [1] to [4] on page 68 to display the

Playlist menu.

Follow the steps [1] to [4] on page 68 to display the

Playlist menu.

1 Select "Index Picture Set" using

buttons.

Use

, PLAY (DVD), and

K L

1 ^{Select "Chapter Mark" using}

buttons, then

PAUSE buttons to decide the picture you want

to select as a thumbnail. Then, press ENTER

button.

press ENTER button.

Option window will appear.

Option window will appear and the video in the

thumbnail will begin to play.

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Add

Chapter 1/1

Chapter Mark

Delete

Index Picture Set

Disc > Edit > Playlist

Title Delete

Scene Delete

Edit Title Name

Chapter Mark

Index Picture Set

JAN/ 1 1:00AM CH12 XP

0:01:25

Yes

JAN/ 1 1:00AM CH12 XP

K L

0:01:25

2 Select "Add" or "Delete" using

buttons, then

press ENTER button.

Option window will appear.

2 ^{Select "Yes" using}

buttons, then press

ENTER button.

<Add>:

<Delete>:

A picture for thumbnail will be set.

Disc > Edit > Playlist

Title Delete

NOTE:

Scene Delete

Edit Title Name

Scene Delete

Edit Title Name

• This operation may take a few minutes to complete.

Add

Chapter 1/1

Chapter Mark

Chapter 2/2

Chapter Mark

Delete

Index Picture Set

Delete

Index Picture Set

• If a selected picture for a thumbnail is deleted by deleting a

part of a title, a default picture will be selected.

Yes

JAN/ 1 1:00AM CH12 XP

0:01:25

3 ^{After writing to disc is completed, press}SETUP

• You cannot delete the first chapter of each title.

button to exit DISC menu.

3 Select "Yes" using

buttons, then press

ENTER button.

A chapter marker will be added or deleted.

NOTE:

• These operations may take a few minutes to complete.

4 ^{After writing to disc is completed, press}SETUP

button to exit DISC menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Adding Titles to Playlist

Deleting Playlist

DVD-RW (VR)

You can add or delete a title in the playlist as you

prefer. You can add titles to a Playlist up to 99.

A Playlist can be deleted if no longer needed.

SETUP

ENTER

Follow the steps [1] to [3] on page 68 to display the

Playlist.

Follow the steps [1] to [3] on page 68 to display the

Playlist.

1 ^{Select "Delete Playlist" using}/ / / buttons,

then press ENTER button.

1 Select "Add New Title" using / / / buttons,

Option window will appear.

then press ENTER button.

NOTE: Playlist

Original list will appear.

• Deleting a Playlist will not increase the available recording

time on disc.

Disc > Edit > Playlist > Add New Title

Disc > Edit > Playlist

JAN/10 10:30AM

JAN/12 5:00PM

JAN/12 8:00PM

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

Add New

Title

Delete

Playlist

Yes

JAN/1 4:00AM

JAN/1 5:00AM

2 ^{Select a desired title using}/ / / buttons,

then press ENTER button.

2 ^{Select "Yes" using}

buttons, then press

The selected title will be added in Playlist.

ENTER button.

Playlist will be erased. The display will return to

TV screen.

Disc > Edit > Playlist > Add New Title

58%

Writing to Disc

Disc > Edit > Playlist

JAN/1 1:00AM

JAN/1 2:00AM

JAN/1 3:00AM

JAN/1 4:00AM

JAN/1 5:00AM

JAN/12 8:00PM

3 After writing to disc is completed, press SETUP

button to exit DISC menu.

• To delete a title from Playlist, refer to "Deleting

Titles" on page 68.

• To delete a Playlist, refer to "Deleting Playlist"

in the next section.

Download from Www.Somanuals.com. All Manuals Search And Download.

OPERATING DVD RECORDER

ARENTAL LOCK LEVEL SETTING

Some DVD-Video discs feature a Parental Lock

level. Playback will stop if the ratings exceed the lev-

els you set, it will require you to enter a password

before the disc will playback. This feature prevents

your children from viewing inappropriate material.

[A] A password has not been set yet

Setup > Playback

DVD

• If you select "No", proceed

to step [5].

TV Mode

4:3 Letter Box

Change Password?

All

Yes

Parental Lock

All

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

NOTE: Parental Lock Availability

Dynamic Range Control

Fast Forward with Audio

OFF

• Parental lock function may not be available to some discs.

• With some DVDs, it may be difficult to find if they are com-

patible with parental lock. Be sure to check if the parental

lock function operates as you have set.

Yes

Setup > Playback

DVD

• Select "Yes" using

but-

TV Mode

4:3 Letter Box

Password

All

- - - -

tons, then enter a new pass-

word using Number buttons.

Then, press ENTER button.

Your setting will be activated.

Parental Lock

All

OFF

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

SETUP

Dynamic Range Control

Fast Forward with Audio

OFF

ENTER

[B] A password has been set already

STOP C (DVD)

Setup > Playback

DVD

• Enter the current pass-

word using Number but-

tons.

TV Mode

4:3 Letter Box

All

Password

All

OFF

Parental Lock

* * * *

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

Press STOP (DVD) button if you are playing a disc.

Dynamic Range Control

Fast Forward with Audio

OFF

1 Press SETUP button to display SETUP/DISC

menu.

SETUP/DISC menu will appear.

Setup > Playback

DVD

• If you select "No", proceed

to step [5].

2 Select "SETUP" using

buttons, then press

TV Mode

4:3 Letter Box

Change Password?

All

Yes

Parental Lock

All

ENTER button.

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

SETUP menu will appear.

Dynamic Range Control

Fast Forward with Audio

OFF

3 ^{Select "Playback" using}/ / / buttons, then

press ENTER button.

Yes

Change the password

Option window will appear.

K L

4 ^{Select "Parental Lock" using}

buttons, then

Setup > Playback

DVD

• Select "Yes" using

but-

press ENTER button.

TV Mode

4:3 Letter Box

Password

All

- - - -

tons, then enter a new pass-

word using Number buttons,

then press ENTER button.

Your setting will be activated.

Parental Lock

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

Parental Lock (Default :All)

Dynamic Range Control

Fast Forward with Audio

Set the Parental Lock level.

OFF

Setup > Playback

DVD

NOTE: Forget Password

TV Mode

4:3 Letter Box

All

Parental Lock

• Record the password in case you forget it.

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

Original

OFF

• Press CLEAR button to erase numbers entered incorrectly.

• When you forget the password or you want to clear all set-

tings in Parental lock, enter 4,7,3,7 using Number buttons in

option window. Password will be cleared and parental levels

will be set to All.

Dynamic Range Control

Fast Forward with Audio

OFF

5 Press SETUP button to exit SETUP menu.

Setup > Playback

DVD

• Change the parental level

TV Mode

4:3 Letter Box

All

K L

using

buttons, then

OFF

Parental Lock

All

Disc Menu Language

Audio Language

Subtitle Language

Digital Out

English

press ENTER button.

Original

Option window will appear.

Proceed to step [A] or [B].

Dynamic Range Control

Fast Forward with Audio

OFF

Download from Www.Somanuals.com. All Manuals Search And Download.

CHANGING SETUP MENU

ETUP MENU LIST

The following table shows the contents you can set, including the default settings.

Refer to the following table for useful operation.

SETUP menu Items (highlight is the default)

Contents

1.Language setting

English

French

Spanish

Disc Menu

Language

Set the language for disc menu.

Page 32

Original

English

French

Audio Language

Set the language for audio.

Set the language for subtitle.

OFF

English

French

Subtitle Language

2.Audio setting

Pages 12-13

PCM

Digital Out

Set whether the sound recorded in

96kHz will be down sampled in 48kHz.

Auto

48kHz

96kHz

Dolby Digital

PCM

Set the type of sound signal which outputs

from the digital audio output jack.

Stream

Compressing the range of sound volume.

Dynamic Range

Control

OFF

Outputting the sound during play in fast

forward.

Fast Forward with

Audio

OFF

100%

OSD Background

Transparency

Set the background transparency of

OSD screen.

3. OSD Display setting

Pages 14-15,

24-27

35%

25%

OSD Background

Color

Set the OSD screen color.

1 (Green), 2 (Blue), 3 (Red)

OSD Language

English

Français

Español

Select the language for OSD.

Screen Saver

OFF

5 minutes

10minutes

Set the time to work the screen saver

on the screen.

Set the closed caption mode.

Caption

OFF

CAPTION1

V-CHIP Setup

TV RATING

MPAA RATING

CHANGE CODE

Prevent their children from watching

inappropriate material on TV.

4.Parental setting

Page 72

ALL

Set the parental level of your DVD discs.

Set and change the password.

Parental Lock

level 8 to 1

Enter the current

four-digit password

(Change password)

NOTE:

• If you change the setting in SETUP menu, the information remains even when the power is turned off.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS

ROUBLESHOOTING

Before requesting service for this unit, check the table below for a possible cause of the problem you are

experiencing. Some simple corrections may solve the problem and restore the proper operation.

Symptom

Power

Remedy

The power does not turn on.

• Check that the AC power cord is connected securely.

Picture

• Re-connect the connecting cord securely.

• The connecting cords are damaged.

• The Setup Display appears. Press SETUP or RETURN

button to turn off the display.

There is no picture.

•

Check antenna/cable wire and the fittings at each end of the wire.

• The disc is dirty or flawed.

Picture noise appears.

• Head cleaning for VCR may be necessary. Refer to "AUTO

HEAD CLEANING".

•

Adjust tracking control for better picture by pressing

CHANNEL

buttons while you are playing a video tape.

•

Check antenna/cable wire and the fittings at each end of the wire.

Try to set the channels with "Auto Preset" in SETUP menu (page 16).

TV program reception does not fill the

screen.

• Select a channel of any TV program using the CHANNEL

K L

buttons.

•

Check antenna/cable wire and the fittings at each end of the wire.

• Adjust antenna.

• Adjust the picture.

TV program pictures are distorted.

•

Place this unit and any bunched antenna cables farther apart.

Check antenna/cable wire and the fittings at each end of the wire.

TV channels cannot be changed.

Distorted color appears on screen

• Connect the antenna cable correctly (page 10).

• Perform auto channel preset on page 16.

•

Check antenna/cable wire and the fittings at each end of the wire.

• Magnetism from nearby appliances and unshielded

speakers and geomagnetism might affect the color of the

TV picture. Move the TV/VCR/DVD away from the

appliances or unshielded speakers, the TV/VCR/DVD can

repair itself automatically. If you want to repair

immediately, unplug the power cord, then plug it in again

after 30 minutes later or so.

Sound

No sound is output.

• Adjust volume control.

• The disc is dirty or flawed.

• Re-connect all connections securely.

• The connecting cord is damaged.

• Check the connections to the amplifier input.

• The input source setting on the amplifier is incorrect.

• The unit is in Pause mode or in Slow-motion play mode.

• The unit is in fast forward or fast reverse mode.

•

If the audio signal does not come through the AUDIO OUT

COAXIAL jack, check the Audio Setup settings (pages 12-13).

• The disc is dirty or flawed.

When playing a DTS-CD, noise may come from the speakers.

This unit is not compatible with DTS-CD.

Sound is noisy.

•

• This unit is not compatible with DTS sound.

No DTS sound is output.

Download from Www.Somanuals.com. All Manuals Search And Download.

Symptom

Playback

Remedy

The disc does not play.

• No disc is inserted.

• A blank disc is inserted.

• No cassette tape is inserted.

• The disc is upside down. Insert the disc with the labeled

side facing up.

• The disc is not correctly inserted.

•

The unit cannot play certain discs (such as a CD-ROM) (page 31).

The region code on the DVD VIDEO does not match the unit (page 31).

• Moisture has condensed inside the unit. Remove the disc

and leave the unit turned on at least for 2 hours until the

moisture evaporates (page 5).

• If the disc was recorded on other recorder, the unit cannot

play the disc if it was not finalized (page 54).

The disc does not start playback from

the beginning.

•

Resume play was activated (page 36). Press STOP C (DVD)

button twice.

You have inserted a disc whose Title menu or DVD menu

automatically appears on the TV screen when it is first inserted.

•

The unit starts playing from the disc

automatically.

• The DVD VIDEO features an auto playback function.

Some functions such as Stop, Search, or

Slow-motion Play cannot be performed.

•

Depending on the disc, you may not be able to do some of the

operations above. See the instruction manual supplied with the disc.

The language for the sound track

cannot be changed.

• Multilingual tracks are not recorded on the DVD VIDEO,

DVD-R or DVD-RW being played.

• The DVD VIDEO prohibits the changing of the language

for the sound track.

• Try changing the language using the DVD VIDEO's menu.

The subtitle language cannot be

changed or turned off.

• Multilingual subtitle are not recorded on the DVD VIDEO.

• The DVD VIDEO prohibits changing of the subtitles.

• Try changing the subtitle using the DVD VIDEO's menu.

The angles cannot be changed.

•

Multi-angles are not recorded on the DVD VIDEO being played.

• You are trying to change the angles when

not appear on the TV screen (page 43).

• The DVD VIDEO prohibits changing angles.

icon does

• Try changing the angle using the DVD VIDEO’s menu.

Recording/Timer recording/Editing

The channel cannot be changed from

the channel you are recording.

• You can only watch the channel currently being recorded.

Recording does not start immediately

after you press DVD RECORD or

VCR RECORD button.

• An unused DVD-R or DVD-RW was inserted. It takes a

while for the unit to automatically format a disc.

•

Make sure the tape has a record tab when you record to a

cassette tape. If needed, cover the hole with cellophane tape.

Nothing was recorded even though

you set the timer setting correctly.

• There was a power failure during recording.

•

The units internal clock stopped due to a power failure that

lasted for more than 3 seconds. Reset the clock (page 19).

• Disconnect the AC power cord from the AC outlet and

connect it again.

•

The program contains copy protection signals that restrict copying.

• The timer setting overlapped with another setting that was

set later or has priority.

Recording does not stop immediately

after you press STOP C button.

• It will take a few seconds for the unit to input disc data

before recording stops.

Timer recording is not completed or

did not start from the beginning.

• The timer setting overlapped with another setting that was

set later or has priority (page 60).

• Disc space was not enough.

Timer recording is not available.

• Make sure that the recordable tape or disc should be

inserted in the unit. If not, press POWER button.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS

TROUBLESHOOTING

Symptom

Remedy

Remote control

The remote control does not function.

• Batteries are weak.

• There are obstacles between the remote control unit and

the main unit.

• The remote control unit is far from the main unit.

• There are no batteries in the remote control unit.

•

The remote control is not pointed at the remote sensor on the unit.

• Check if a cassette tape is in this unit.

Others

The unit does not operate properly.

• When static electricity causes the unit to operate

abnormally, unplug the unit and wait a few minutes, then

plug it in again.

The disc tray does not open when you • It may take a few seconds for the disc tray to open after

press A OPEN/CLOSE button in the

main unit.

you have recorded or edited a disc.

• The unit may be adding disc data to the disc.

• The unit may still be recording.

My TV/VCR/DVD is showing captions

that are misspelled.

• You are watching a live broadcast and spelling errors

made by the closed captioning production company may

pass through uncorrected. A prerecorded program will not

show any misspelled words because of the normal time

available for editing the captions.

My TV/VCR/DVD will not show the text • Captions that are delayed a few seconds behind the actual

dialogue in its entirety or there is a

delay of what is being said.

are common for live broadcast. Most captioning production

companies can display a dialogue to a maximum of 220

words per minute. If a dialogue exceeds that rate, selective

editing is used to insure that the captions remain up-to-

date with the current TV screen dialogue.

My captions are scrambled with white

boxes on the TV screen.

• Interference caused by building, power lines,

thunderstorms, etc. may cause scrambled or incomplete

captions to appear.

My program guide listed a TV show as • Broadcasters may at times use a time compression

being closed captioned but none of

the captions were displayed.

process to speed up the actual program so that additional

advertising time can be given. Since the decoder cannot

read the compressed information, captions will be lost.

My prerecorded video tape does not

show any captions. The tape box

mentions it being closed captioned.

• The video tape was either an illegal copy or the tape

duplicating company accidentally left out the captioning

signals during the copying process.

My TV screen shows a black box on

certain channels.

• You are in the TEXT mode. Set CAPTION mode to

CAPTION [OFF].

"Repairing" appears on the display.

• If there is a power failure or unplugging during recording,

finalizing, formatting or editing, a Repairing process will

begin automatically just after turning the unit on again. It

may take several minutes up to about four hours.

Repairing

The DVD disc that I recorded will

not be played on other DVD units.

• You must "Finalize" all recorded discs before they can be

played on other DVD players. Without finalization, Video

mode discs cannot be played back on other DVD players

and VR mode discs cannot be played back on other VR

compatible players (See "Finalizing Discs" on page 54).

The edited Playlist can not be used

with other DVD units.

• Confirm that the disc is recorded in VR mode and finalized

properly.

• This feature may not be available according to circumstances.

I have finalized the DVD disc, but it will still • Not all DVD recordable discs will be played on all DVD

not be played back on other DVD units. units. This is inherent in the DVD recordable format.

Download from Www.Somanuals.com. All Manuals Search And Download.

Error message

Cause

Solution

Disc Error

--- Please eject the disc. ---

Playback feature may not be

available on this Disc.

Unplayable disc is inserted

in the DVD recorder.

Insert the standardized disc which

bear the marks on page 31.

Region Error

Playback is not authorized

because the region code of the

DVD video disc you inserted

is different.

Insert the DVD-Video disc with

region codes 1 or ALL.

--- Please eject the disc. ---

Playback is not authorized in your

region.

Parental Lock On

--- Please eject the disc. ---

The current selected parental level

Prohibits playback.

The current selected parental

level in the SETUP Menu

prohibits playback.

Check the "Parental Lock" setting

(page 72).

Recording Error

The recording function encountered

the copy prohibited program.

You cannot record copy prohibited

programs.

This program is not allowed

to be recorded.

Recording Error

This program is not

recordable in Video mode.

You are trying to record the copy-

once program onto the DVD-RW

disc in Video mode or the DVD-R

disc.

Set "DVD-RW Recording Format"

to "VR mode" (page 49-50).

Recording Error

You are trying to record onto the

disc which is unrecordable, or the

disc status prevents recording.

Insert the recordable disc, and

ensure the disc status satisfies

the recording requirements

(pages 48-55).

Can not record on this disc.

Recording Error

You are trying to record a copy-

once program onto a DVD-RW

disc which is not compatible with

CPRM.

Insert a ver.1.1 CPRM compatible

DVD-RW disc (page 49).

This program is not allowed to

be recorded on this disc.

Recording Error

You are trying to record on to the

protected disc which is set in the

Disc Setting Menu.

Release the disc protect setting

in the Disc Setting menu (page 55).

This disc is protected and not

recordable.

Recording Error

Disc is full.

(No area for new recording)

You are trying to record onto

the disc which has no space

for recording.

Insert the recordable disc with

enough recording space.

Recording Error

You are trying to record onto the

disc on which the number of

recording titles comes up to the

maximum (99).

Delete unnecessary titles

(pages 62, 64).

You cannot record more

than 99 titles on one disc.

(The maximum is 99)

Recording Error

You cannot record more the

999 chapters on one disc.

You are trying to record onto the

VR mode DVD-RW disc on which

the number of recording chapters

comes up to the maximum (999).

Delete unnecessary chapter

markers (pages 63, 66).

(The maximum is 999)

Recording Error

This disc has no space to write the

Control Information when recording

or deleting contents.

Delete unnecessary titles

(pages 62, 64).

You cannot record on this disc

as Control Information is full.

When editing has been repeatedly

performed, the control Information

area may come up to be full even

the recording area has enough space.

Recording Error

This disc's working area for

recording is full.

Insert a new disc.

You cannot record on the

disc as Power Calibration

Area is full.

When recordings are performed

repeatedly onto an unstable disc,

this area may fill up.

Recording Error

You are trying to record onto

the disc already finalized.

Release the finalizing for this disc

(page 54).

This disc is already finalized.

Download from Www.Somanuals.com. All Manuals Search And Download.

OTHERS

AINTENANCE

CLEANING DISCS

When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center out. Do not wipe in a circular motion.

•

• Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or

antistatic spray intended for analogue records.

CLEANING THE DISC LENS

• If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING

GUIDE” in this Owner’s Manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service

Center for inspection and cleaning of the laser optical pickup unit.

DISC HANDLING

• Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

• Always store the disc in its protective case when it is not used.

CABINET CLEANING

•

Wipe the front panel and other exterior surfaces of the TV/VCR/DVD with a soft cloth immersed in lukewarm water and wrung dry.

• Never use a solvent or alcohol. Do not spray insecticide liquid near the TV/VCR/DVD. Such chemicals may cause damage

and discoloration to the exposed surfaces.

AUTO HEAD CLEANING

• Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

• Playback picture may become blurred of interrupted while the TV program reception is clear. Dirt accumulated on the video

heads after long periods of use, or the usage of rental or worn tapes can cause this problem.

If a streaky or snowy picture appears during playback, the video heads in your TV/VCR/DVD may need to be cleaned.

1. Please visit your local Audio/Video store and purchase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem, please call our help line at 1-800-605-8453, to locate an

Authorized Service Center.

NOTES:

• Remember to read the instructions included with the video head cleaner before use.

• Clean video heads only when problems occur.

SERVICING

•

Should your TV/VCR/DVD become inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts

inside. Please refer to the warranty statement page at the rear of this manual.

ANGUAGE CODE

Language

Code

Language

Finnish

French

Frisian

Code

Language

Lingala

Code

Language

Sindhi

Code

(Afan) Oromo

Abkhazian

Afar

6159

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

5261

5256

5255

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

5861

5847

5868

5860

5866

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6149

6164

6247

6265

5247

6258

6266

6367

6550

6555

6565

6557

6558

6561

5165

6567

6569

6568

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Lithuanian

Macedonian

Malagasy

Malay

Malayalam

Maltese

Maori

Singhalese

Siswat

Slovak

Slovenian

Somali

Spanish

Sundanese

Swahili

Swedish

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish

Turkmen

Twi

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

Afrikaans

Albanian

Amharic

Arabic

Galician

Georgian

German

Greek

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Marathi

Moldavian

Mongolian

Nauru

Nepali

Bengali;Bangla

Bhutani

Bihari

Bislama

Breton

Bulgarian

Burmese

Byelorussian

Cambodian

Catalan

Chinese

Corsican

Croatian

Czech

Danish

Dutch

English

Esperanto

Estonian

Faroese

Fiji

Hungarian

Icelandic

Indonesian

Interlingua

Interlingue

Inupiak

Norwegian

Occitan

Oriya

Panjabi

Pashto; Pushto

Persian

Polish

Portuguese

Quechua

Irish

Italian

Japanese

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Korean

Kurdish

Laothian

Latin

Latvian; Lettish

Rhaeto-Romance 6459

Romanian

Russian

Samoan

Sangho

Sanskrit

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

6461

6467

6559

6553

6547

5350

6564

6554

6566

6660

6560

Setswana

Shona

Download from Www.Somanuals.com. All Manuals Search And Download.

LOSSARY

Analog audio

Dolby Digital

Regions code

An electrical signal that directly

represents sound.

Compare this to digital audio

which can be an electrical signal,

but is an indirect representation of or multi-channel audio (up to

sound. See also "Digital audio".

The system to compress digital

sound developed by Dolby

Laboratories.

Regions associate discs and play-

ers with particular areas of the

world. This unit will only play discs

that have compatible region

codes. You can find the region

code of your unit by looking on

the rear panel. Some discs are

compatible with more than one

region (or all regions).

It offers you sound of stereo(2ch)

6 channels (5.1ch)).

Aspect ratio

MP3 (MPEG Audio Layer 3)

The width of a TV screen is rela-

MP3 is a method of compressing

tive to its height. Conventional TVs files. You can copy MP3 files on

Sampling frequency

are 4:3 (in other words, the

screen is almost square);

widescreen models are 16:9 (the

screen is almost twice as wide as

it is high).

CD-R/RW discs from the comput-

er and play the files on this unit.

The sound rate is measured by a

specified interval to turn into digi-

tal audio data. The numbers of

sampling in one second defines

as sampling frequency. The higher

the rate, the better the sound

quality as possible as it is.

Finalize

To make DVD discs, which have

been recorded on, possible to

play in other DVD players. With

Chapter

Just as a book is split up into sev- this unit, it is possible to finalize

eral chapters, a title on a DVD

disc is usually divided into chap-

ters.

DVD-R/DVD-RW discs.

SAP

(Secondary Audio Program)

PCM (Pulse Code Modulation)