Sylvania MP3 Docking Station SIP1005 User Manual

MODEL NO. SIP1005  
PORTABLE DOCKING STATION FOR iPOD  
OWNER'S MANUAL  
H
HOUR  
SKIP/REV  
SKIP/REV  
PM  
M
CLK SET  
PLAY/PAUSE  
MIN  
PLEASE READ BEFORE OPERATING THIS EQUIPMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY INSTRUCTIONS  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER (OR BACK). NO  
USER-SERVICEABLE PARTS INSIDE. REFER SERVIC-  
ING TO QUALIFIED SERVICE PERSONNEL.  
DANGEROUS VOLTAGE:  
INFORMATION:  
This equipment has been tested and  
The lightning flash with arrowhead  
symbol, within an equilateral trian-  
gle is intended to alert the user to  
the presence of uninsulated dan-  
gerous voltage within the product’s  
enclosure that may be of sufficient  
magnitude to constitute a risk of  
electric shock to persons.  
found to comply with the limits for a  
Class B digital device, pursuant to Part  
15 of the FCC Rules. These limits are  
designed to provide reasonable  
protection against harmful interference  
in a residential installation. This  
equipment generates, uses and can  
radiate radio frequency energy and, if  
not installed and used in accordance  
with the instructions, may cause harmful  
interference to radio communications.  
However, there is no guarantee that  
interference will not occur in a particular  
installation. If this equipment does  
cause harmful interference to radio or  
television reception, which can be  
determined by turning the equipment off  
and on, the user is encouraged to try to  
correct the interference by one or more  
of the following measures:  
ATTENTION:  
The exclamation point within an  
equilateral triangle is intended to  
alert the user to the presence of  
important operating and mainte-  
nance (servicing) instructions in  
the literature accompanying the  
appliance.  
FCC WARNING:  
This equipment may generate or use  
radio frequency energy. Changes or  
modifications to this equipment may  
cause harmful interference unless the  
modifications are expressly approved in  
the instruction manual. The user could  
lose the authority to operate this  
equipment if an unauthorized change or  
modification is made.  
* Reorient or relocate the receiving  
antenna.  
* Increase the separation between the  
equipment and receiver.  
* Connect the equipment into an outlet  
on a circuit different from that to which  
the receiver is connected.  
SURGE PROTECTORS:  
It is recommended to use a surge  
protector for AC connection. Lightning  
and power surges ARE NOT covered  
under warranty for this product.  
* Consult the dealer or an experienced  
radio/TV technician for help.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
SAFETY INSTRUCTIONS  
voltage points or short out parts that could result in  
fire or electric shock. Never spill or spray any type  
of liquid on the product.  
22. DAMAGE REQUIRING SERVICE  
Unplug the product from the wall outlet and refer  
servicing to qualified service personnel under  
the following conditions:  
17. OUTDOOR ANTENNA GROUNDING  
If an outside antenna is connected to the prod-  
uct, be sure the antenna system is grounded so  
as to provide some protection against voltage  
surges and built-up static charges. Section 810  
of the National Electric Code, ANSI/NFPA 70,  
provides information with respect to proper  
grounding of the mast and supporting structure,  
grounding of the lead-in wire to an antenna dis-  
charge product, size of grounding conductors,  
location of antenna discharge product, connec-  
tion to grounding electrodes and requirements  
for grounding electrodes.  
a. When the power-supply cord or plug is  
damaged.  
b. If liquid has been spilled or objects have  
fallen into the product.  
c. If the product has been exposed to rain or  
water.  
d. If the product does not operate normally by  
following the operating instructions. Adjust  
only those controls that are covered by the  
operating instructions, as an adjustment of  
other controls may result in damage and will  
often require extensive work by a qualified  
technician to restore the product to its  
normal operation.  
e. If the product has been dropped or the  
cabinet has been damaged.  
ANTENNA  
LEAD IN  
WIRE  
f. When the product exhibits a distinct change  
in performance this indicates a need for  
service.  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
23. HEAT  
The product should be situated away from heat  
sources such as radiators, heat registers, stoves  
or other products (including amplifiers) that pro-  
duce heat.  
ELECTRIC  
SERVICE  
EQUIPMENT  
GROUNDING CONDUCTORS  
(NEC SECTION 810-21)  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
24. NOTE TO CATV SYSTEM INSTALLER  
This reminder is provided to call the CATV sys-  
tem installer's attention to Article 820-40 of the  
NEC that provides guidelines for proper ground-  
ing and, in particular, specifies that the cable  
ground shall be connected to the grounding sys-  
tem of the building, as close to the point of cable  
entry as practical.  
NEC - NATIONAL ELECTRICAL CODE  
S2898A  
EXAMPLE OF ANTENNA GROUNDING AS PER  
NATIONAL ELECTRICAL CODE  
18. SERVICING  
Do not attempt to service this product yourself  
as opening or removing covers may expose you  
to dangerous voltage or other hazards. Refer all  
servicing to qualified service personnel.  
19. REPLACEMENT PARTS  
When replacement parts are required, be sure  
the service technician uses replacement parts  
specified by the manufacturer or those that have  
the same characteristics as the original part.  
Unauthorized substitutions may result in fire,  
electric shock or other hazards.  
20. SAFETY CHECK  
Upon completion of any service or repairs to this  
product, ask the service technician to perform  
safety checks to determine that the product is in  
proper operating condition.  
21. WALL OR CEILING MOUNTING  
The product should be mounted to a wall or ceil-  
ing only as recommended by the manufacturer.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
POWER SOURCE  
AC Operation:  
Unwind the AC power cord and extend it to  
its full length. Insert the small plug of the AC  
power cord to the unit. Insert the AC plug of  
the cord into any convenient 120V 60Hz  
household outlet.  
AC Outlet  
Please note that this unit is equipped with a  
polarized AC plug which has one blade wider  
than the other. This is a safety feature to  
AC Plug  
reduce the likelihood of electric shock. This polarized AC plug will only fit in a polarized  
AC outlet. If you find that you cannot insert this plug you’re your outlet, you may have an  
obsolete non-polarized outlet. Please do not try to defeat this safety feature by using a  
non-polarized adaptor or by filling the wider blade to make it fit into your outlet. If this plug  
does not fit into your outlet, you should contact a qualified licensed electrician to replace  
your obsolete outlet.  
DC Operation:  
Install eight (8) “C” size batteries (not included) into the battery compartment on the bot-  
tom of the unit as the polarity marking inside the battery compartment.  
Note: when the AC cord is plug in the unit. Battery power will be cut off automatically.  
Protect Your Furniture:  
This model is equipped with non-skid rubber ‘feet’ to prevent the product from moving  
when you operate the controls. These ‘feet’ are made from non-migrating rubber mate-  
rial specially formulated to avoid leaving any marks or stains on your furniture.  
However certain types of oil based furniture polishes, wood preservatives, or cleaning  
sprays may cause the rubber ‘feet’ to soften, and leave marks or a rubber residue on  
the furniture. To prevent any damage to your furniture we strongly recommend that you  
purchase small self-adhesive felt pads, available at hardware stores and home  
improvement centers everywhere, and apply these pads to the bottom of the rubber  
‘feet’ before you place the product on fine wooden furniture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
LOCATION OF CONTROLS  
15  
16  
14  
1. FUNCTION SELECTOR (POWER OFF -- IPOD/AUX -- RADIO)  
2. CLK (CLOCK) SET BUTTON  
3. BAND SWITCH (FM ST -- AM)  
4. HOUR BUTTON  
5. SKIP/FWD BUTTON  
6. PLAY/PAUSE  
7. FM ANTENNA  
BUTTON  
8. SKIP/REV BUTTON  
9. MIN (MINUTE) BUTTON  
10. TUNING KNOB  
11. AC IN JACK (REAR OF UNIT)  
12. AUX IN JACK (REAR OF UNIT)  
13. AUX OUT JACK (REAR OF UNIT)  
14. BATTERY COMPARTMENT (BOTTOM OF UNIT)  
15. LCD DISPLAY  
16. VOLUME KNOB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
PERIPHERALS  
iPod BRACKET NO.  
iPod MODEL  
iPod Nano 2GB, 4GB  
iPod Nano 2nd Gen.* 2GB, 4GB, 8GB  
iPod Mini 4GB, 6GB  
1
2
3
4
5
6
iPod with Video 30GB  
iPod with Video 60GB, 80GB  
3rd Gen. iPod 10GB, 15GB, 20GB  
4th Gen. iPod 20GB  
U2 iPod 20GB  
iPod Photo, Color, U2 iPod 20GB, 30GB  
iPod with Color Display 20GB  
PLEASE MOVE THE CONNECTOR TO THE LEFT SIDE BEFORE INSERTTING THE BRACKET.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
OPERATION  
CLOCK SETTING:  
Slide the FUNCTION Selector to POWER OFF or iPod/AUX position.  
Press and hold the CLK (Clock) button. Press the HOUR button simultaneously and  
repeatedly to adjust the hour.  
Press and hold the CLK (Clock) button. Press the MIN (Minute) button simultane-  
ously and repeatedly to adjust the minute.  
Note: If the unit has not connected to the AC power and the batteries had not installed.  
When you connect the unit to AC power or install the batteries again. Clock need to  
reset.  
Listening with Radio:  
Slide the FUNCTION Selector to RADIO position to power on the unit.  
Slide the BAND Switch to AM or FM-ST (Stereo) position as desire. The radio sta-  
tion frequency will appear on the display.  
Turn the TURNING Knob to receiver a radio station as desire.  
Turn the VOLUME Knob to adjust the volume as desire.  
When finished listening, slide the FUNCTION Selector to POWER OFF position to  
power off the unit.  
ANTENNAS  
AM - This unit has a build in ferrite rod antenna, which provides adequate reception in  
most areas. If reception is weak, turn the unit to improve reception.  
FM - The FM Rod Antenna is for FM reception only. If reception is weak, adjust the  
length and the direction of the antenna.  
Listening and Charging The iPod (iPod not included)  
Chose the correct adaptor as the list on page 6 to hold the iPod tightly on the unit.  
In power off mode, insert the iPod to the docking on the front of unit.  
Slide the FUNCTION Selector to the iPod/AUX position.  
The iPod will be power on automatically.  
Set the iPod to plays the music as usual, or  
Press the Play/Pause button on the unit to start playback.  
Press this button again to pause playback. Press again to resume normal  
playback.  
Press the SKIP FWD/REV buttons on the unit to searching  
music.  
Adjust the volume by turn the volume knob on the unit or press volume control but-  
tons on the iPod.  
When finished listening, power off the unit by slide the FUNCTION Selector to  
POWER OFF position.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
OPERATION  
NOTE:  
If your iPod don't fit to the enclosed adaptor ,connect it via the AUX IN jack as the  
section of AUX IN below.  
To recharge the iPod, insert the iPod to the docking, the iPod will be recharge auto-  
matically.  
AUX IN JACK:  
Connect a 3.5mm mini jack stereo connection cable (not included) to the AUX IN  
jack on the rear of unit to the Phones/Line out/ AUX out jack on the external device  
such like MP3 Players, CD Discman, MP4 Players …. etc.  
Slide the FUNCTION Selector to iPod/AUX position.  
Turn the VOLUME Knob to adjust the volume as desire.  
When finished listening, slide the FUNCTION Selector to POWER OFF position to  
power off the unit.  
AUX OUT JACK:  
To connect an external amplifier, connect a 3.5mm mini jack connection cable (not  
included) to the AUX OUT jack on the rear of unit to the AUX IN/LINE IN jack on the  
external amplifier.  
Plays the Radio or Music as above procedure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
TROUBLESHOOTING GUIDE  
PROBLEM  
POSSIBLE CAUSE  
GENERAL  
SOLUTION  
No sound is heard.  
Slide the FUNCTION Selector.  
Power is not on.  
VOLUME Control is set  
to minimum.  
Adjust the VOLUME  
Control.  
RADIO  
Station has not been  
tuned properly.  
Tune station prope.rly  
Extend the FM antenna.  
No sound is heard.  
FM reception is weak.  
Wrong function is  
selected.  
Slide the FUNCTION  
selector to the radio  
position.  
iPod does not  
dock properly  
Using no or wrong iPod insert.  
Make sure the dock insert is the  
proper fit for your iPod.  
iPod didn’t install properly .  
Remove your iPod from the dock  
and check for obstruction on the  
connectors in the dock and on your  
iPod. Then reseat it in the dock.  
iPod does not  
respond to the  
unit  
iPod is not installed properly.  
iPod is locked up.  
Remove your iPod from the dock  
and check for obstruction on the  
connectors in the dock and on your  
iPod.Then reseat it in the dock.  
Please make sure your iPod is  
working properly before docking into  
the unit. Please refer to your iPod  
manual for details.  
iPod didn’ t  
charge up  
iPod is not installed properly .  
Remove your iPod from the dock  
and check for obstruction on the  
connectors in the dock and on your  
iPod.Then reseat it in the dock.  
SPECIFICATION  
Power Requirement:  
Batteries:  
AC ~ 120V 60Hz  
DC12V (1.5V x 8 “C” size, UM-2 batteries)  
FM 88 - 108 MHz  
Frequency Range:  
AM 530 - 1710 KHz  
Power Consumption:  
18W  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED PRODUCT WARRANTY  
This quality product is warranted to be free from manufacturer’s defects in material and workman-ship,  
provided that the unit is used under the normal operating conditions intended by the manufacturer.  
Should you have any problem with this product, please and it is highly recommended to visit our website at  
operating manuals and trouble shooting tips on our website which gives you the answer on most of the  
questions you could have in operating the unit.  
TERMS OF WARRANTY  
C.I. Service Dept. warrants this product to be free from defects in materials and workmanship for 1 year on  
parts and 90 days on labor. If you originally purchased your product more than 90 days ago, a repair fee  
may apply.  
Nothing within this warranty shall imply that C.I. will be responsible or liable for any damage to any items  
placed in this product, whether due to any defect of the product, or its use, whether proper or improper.  
EXCLUSIONS  
Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service Dept. (USA), there are no other  
warranties, conditions, representations or guarantees, express or implied, made or intended by C.I. or its  
authorized distributors and all other warranties, conditions, representations or guarantees, including any  
warranties, conditions, representations or guarantees under any Sale of Goods Act or like legislation or  
statue is hereby expressly excluded. Save as herein provided, C.I. Service Dept. (Canada) or C.I. Service  
Dept. (USA), shall not be responsible for any damages to persons or property, including the unit itself,  
howsoever caused or any consequential damages arising from the malfunction of the unit and by the  
purchase of the unit, the purchaser does hereby agree to indemnify and save harmless C.I. from any claim  
for damages to persons or property caused by the unit.  
TO OBTAIN REPAIRS UNDER THE TERMS OF THIS WARRANTY  
1. The original purchaser must present a copy of the original bill of sale and the service warranty card.  
2. Any alterations, abuse, misuse, battery corrosion or accidental damage voids the warranty.  
3. The warranty does not cover cabinets and accessories.  
4. No warranty or insurance contained or set out shall apply when damage or repair is caused by power  
failure; damage in transit or when moving the unit; improper power supply; use for commercial or  
industrial purposes; service calls resulting in customer education, etc.  
5. The defective product should be mailed to:  
Canada  
U.S.A  
C.I. Service Dept.  
315 Attwell Dr  
C.I. Service Dept.  
2215 Kenmore Avenue  
Ste 100  
Toronto, Ontario  
M9W 5C1  
Buffalo, N.Y.  
14207  
For service assistance and product information, please call: 1-800-968-9853.  
If mailing the product, the freight must be prepaid and a money order for $7.00 should be included  
to cover the cost of insurance and the return of the product.  
6. C.I. reserves the right to repair or replace the parts which have become defective.  
Model No.  
Date Purchased  
Serial No.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Charcoal Grill IG A10EU User Manual
Sony DVD Recorder 3 295 080 121 User Manual
Sony Ericsson GPS Receiver 3200 LS Color User Manual
Sony Portable CD Player WM EX570 User Manual
Sony Speaker SA FT3H User Manual
Sony Universal Remote DAV SR2 User Manual
Stanton CD Player C503 User Manual
Sterling Power Products Battery Charger AB12160 User Manual
Subaru Robin Power Products Water Pump PKX301 User Manual
Swann Network Router Advanced Quad Processor User Manual