Sylvania Flat Panel Television LD190552 User Manual

Español  
Français  
English  
19” LCD TV/DVD  
LD190SS2  
EN Owner's Manual  
Need help?  
Please call toll free or visit our web site below  
FR Manuel du Propriétaire Besoin d’aide?  
Appelez notre numéro gratuit ou visitez notre site web à l’adresse  
ES Manual del Propietario ¿Necesita ayuda? Llame por favor sin costo ó visite nuestro sitio web en  
1-866-321-3927  
  
MODEL NUMBER  
SERIAL NUMBER  
© 2011 Funai Electric Co., Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
English  
FCC WARNING  
This apparatus may generate or use radio frequency energy. Changes or modifications to this apparatus may cause harmful interference  
unless the modifications are expressly approved in the manual. The user could lose the authority to operate this apparatus if an  
unauthorized change or modification is made.  
RADIO-TV INTERFERENCE  
This apparatus has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.  
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This apparatus  
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause  
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.  
If this apparatus does cause harmful interference to radio or television reception, which can be determined by turning the apparatus off  
and on, the user is encouraged to try to correct the interference by one or more of the following measures:  
1) Reorient or relocate the receiving antenna.  
2) Increase the separation between the apparatus and receiver.  
3) Connect the apparatus into an outlet on a circuit different from that to which the receiver is connected.  
4) Consult the dealer or an experienced radio/TV technician for help.  
DECLARATION OF CONFORMITY  
Trade Name: SYLVANIA  
Responsible Party: FUNAI CORPORATION, Inc.  
Address: 19900 Van Ness Avenue, Torrance, CA 90501 U.S.A.  
Telephone Number: 1-866-321-3927  
Model: LD190SS2  
This Class B digital apparatus complies with Canadian ICES-003. StandardTelevision Receiving Apparatus, Canada BETS-7/NTMR-7  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
WARNING: Batteries (battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire or the like.  
Disconnect the mains plug to shut off when find trouble or not in use.The mains plug shall remain readily operable.  
This apparatus should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided.  
Make sure to leave a space of 4 inches (10cm) or more around this apparatus.  
WARNING: To prevent injury, this apparatus must be securely attached to the wall in accordance with the instructions.  
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing or  
climbing on it. A falling unit can cause serious injury or even death.  
LASER SAFETY  
This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due  
to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result  
in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlock defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This item incorporates copy  
protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation.  
Reverse engineering and disassembly are prohibited.  
LAMP IN LCD CONTAINS MERCURY,DISPOSEACCORDINGTO LOCAL,STATE OR FEDERAL LAW.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4
NOTE ABOUT RECYCLING  
Trademark Information  
This unit’s packaging materials are recyclable and  
can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
Batteries should never be thrown away or  
incinerated but disposed of in accordance with  
your local regulations concerning chemical wastes.  
HDMI, the HDMI Logo, and High-Denition Multimedia  
Interface are trademarks or registered trademarks of HDMI  
Licensing LLC in the United States and other countries.  
TO AVOID THE HAZARDS OF ELECTRICAL  
SHOCK AND FIRE  
Do not handle the AC power cord with wet hands.  
Do not pull on the AC power cord when disconnecting it  
from an AC outlet. Grasp it by the plug.  
Do not put your ngers or objects into the unit.  
LOCATION AND HANDLING  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of Dolby  
Laboratories.  
Do not install the unit in direct sunlight or in a place subject  
to dust or strong vibration.  
Avoid a place with drastic temperature changes.  
Install the unit in a horizontal and stable position. Do not place  
anything directly on top or bottom of the unit. Depending  
on your external devices, noise or disturbance of the picture  
and/or sound may be generated if the unit is placed too close  
to them. In this case, please ensure enough space between the  
external devices and the unit.  
ENERGY STAR® is a joint program of the U.S. Environmental  
Protection Agency and the U.S. Department of Energy helping  
us all save money and protect the environment through  
energy efcient products and practices.  
Depending on the environment, the temperature of this unit  
may increase slightly.This is not a malfunction.  
Be sure to unplug the AC power cord from the AC outlet  
before moving or carrying the unit.  
Consumer Notice:  
ThisTV has been set to maximize energy efciency while  
delivering the best possible picture using the factory installed  
home mode settings.  
Changing or enabling other features in thisTV (e.g. brightened  
backlighting) will possibly increase energy consumption  
beyond the original ENERGY STAR® qualied limits.  
DEW CONDENSATION WARNING  
Dew condensation may form inside the unit in the following  
conditions. If so, do not use this unit at least for a few hours  
until its inside gets dry.  
-The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
is a trademark of DVD Format/Logo Licensing  
Corporation.  
The American Academy of Pediatrics discourages television  
viewing for children younger than two years of age.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
English  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6
INTRODUCTION  
Language Code List  
27  
Contents  
Important Safety Instructions  
Trademark Information  
Child Safety  
2
4
5
OPERATING DVD  
Playable Media  
28  
28  
29  
29  
29  
29  
29  
30  
30  
30  
31  
31  
31  
31  
32  
32  
Unplayable Media  
Playback  
Disc Menu  
Resume Playback  
Paused and Step-by-step Playback  
Fast Forward/Fast Reverse  
Slow Forward/Slow Reverse  
Zoom  
INTRODUCTION  
Features  
7
7
8
8
8
Symbols Used in this Manual  
Supplied Accessories  
Mounting the Unit onYour Furniture  
Tilt Stand  
Search Functions  
Repeat Playback  
Attaching the Base  
Installing the Batteries  
Remote Control Function  
Control Panel  
8
8
9
10  
11  
Repeat A-B Playback  
Random Playback  
Programmed Playback  
On-screen Display  
Special Settings  
Terminals  
PREPARATION  
Antenna Connection  
12  
12  
12  
13  
CONNECTING DEVICES  
External Device Connection  
34  
Connection to Cable Receiver or Satellite Box  
Plug In the AC Power Cord  
Initial Setup  
USEFULTIPS  
Troubleshooting Guide  
FAQ  
36  
38  
WATCHINGTV  
SleepTimer  
14  
14  
14  
14  
Switching Each Input Mode  
Channel Selection  
Still Mode  
INFORMATION  
Glossary  
39  
39  
40  
40  
40  
41  
Maintenance  
General Specications  
Electrical Specication  
Other Specications  
Limited Warranty  
TV Screen Display Mode  
Sound Functions  
TV Screen Information  
15  
15  
16  
USING FUNCTIONS  
Picture  
Sound  
18  
18  
19  
20  
25  
25  
Channel  
Features  
Language  
DVD  
© 2011 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any  
storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial  
distribution of this manual or any revision hereto is strictly prohibited.  
Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation  
to notify any person or organization of such changes.  
with the  
design is a registered trademark of Funai Electric Co., Ltd. and may not be used in any way without the express written  
consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this  
manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse  
of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to  
the fullest extent of the law.  
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc., used under license.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7
English  
Resume Playback  
Lets you resume playback from the point at which playback was  
stopped.  
Features  
TV  
Bit Rate Indication  
DRC (dynamic range control)  
You can control the range of sound volume.  
DTV/TV/CATV  
You can use your remote control to select channels which are  
broadcast in digital format and conventional analog format.Also,  
cable subscribers can access their cableTV channels.  
Accessing from MODE button  
Information Display (ATSC only)  
During playback  
You can display the title, contents and other information of the  
current DTV program on theTV screen.  
Subtitles in a Desired Language  
You can select a desired language for displaying subtitle, if that  
language is available on a DVD-video.  
Autoprogram  
This unit automatically scans and memorizes channels available in  
your area, eliminating difcult setup procedures.  
Selecting a Camera Angle  
You can select the desired camera angle, if a DVD contains  
sequences recorded from different angles.  
Child Lock  
This feature allows you to block children’s access to inappropriate  
programs.  
Zoom  
Allows you to enlarge the size of picture image.  
Closed Caption Decoder  
Built-in closed caption decoder displays text for closed caption  
supported programs.  
Black Level Adjustment  
Virtual Surround  
MTS/SAPTuner  
Audio can be selected from the remote control.  
Search  
chapter search/title search/track search/time search  
Auto Standby  
If there is no input signal and no operation for 15 minutes, the  
unit will go into standby mode automatically.  
Marker  
The part on the disc designated by user can be called back.  
Repeat  
chapter/title/track/all/A-B  
SleepTimer  
You can set the unit to go into standby mode after a specic  
Accessing from MODE button  
amount of time.  
Choices for On-screen Language  
Select your on-screen language:  
English, Spanish or French.  
Stereo Sound Function  
PLL Frequency SynthesizedTuning  
Provides free and easy channel selection and lets you tune  
directly to any channel using the number and decimal point “•”  
buttons on the remote control.  
In stop mode  
Program Playback for audio CD  
You can program the order of tracks to play them back in  
designated order.  
Random Playback for audio CD  
This unit can shufe the order of tracks to play them back in  
randomly.  
Various Adjustment for Picture and Sound  
Customizes image quality suitable for your room and sets your  
sound preference.  
Accessing from AUDIO button  
During playback  
fun-Link via HDMI Link (HDMI Cable not Included)  
fun-Link allows your other HDMI link devices to be controlled by  
the HDMI cable connected to yourTV.  
Choices for Audio Language and Stereo Sound Function  
Select your desired languages or stereo sound function when  
different options are available on your disc.  
HDMI Input  
ComponentVideo Input  
PC Input  
S-Video Input  
AV Input  
Symbols Used in this Manual  
The following is the description for the symbols used in this  
Digital Audio Output  
Headphone Audio Output  
manual. Description refers to:  
TV FUNCTIONS  
ATSC  
NTSC  
: DigitalTV operation  
DVD  
:Analog/CableTV operation  
Dolby Digital Sound  
If neither symbol appears, the operation is applicable to  
both.  
Enjoy Dolby Digital multi-channel surround sound when you  
connect the unit to your Dolby Digital decoder.  
Still/Fast/Slow/Step Playback  
Various playback modes are available including still pictures, fast  
forward/reverse, slow motion and step frames.  
DVD FUNCTIONS  
DVD  
CD  
: Playback of DVD-video  
: Playback of audio CD  
DVD Menus in a Desired Language  
You can display DVD menus in a desired language, if available on  
a DVD-video.  
If neither symbol appears under the function heading,  
operation is applicable to both.  
Auto standby  
If there is no operation for 20 minutes, the unit will go into  
standby mode automatically.  
Parental Lock  
Block the viewing of a DVD-video unsuitable for children.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
Supplied Accessories  
Attaching the Base  
You must attach the base to the unit to have it as a table top  
unit. Be sure the front and rear of the base match the proper  
direction.  
Owner’s Manual  
Quick Start Guide Registration card  
If you have any questions, please visit our website at  
www.sylvaniaconsumerelectronics.com  
QSutickart  
1
Spread a thick and soft cloth over a table as shown at step 2.  
Place the main unit face down onto it. Make sure not to  
damage the screen.  
EN  
FR  
ES  
Installation  
Installation  
Instalación  
2
Insert 2 hooks under the  
bottom of the main unit into  
base holes. (shown by arrow  
TV base and 3 screws  
(M4 x 12)  
Remote Control  
(NF033UD)  
Batteries  
), then move the base in  
the direction as shown by  
(AA, 1.5V x 2)  
arrow until it stops and the screw holes are aligned.  
Make sure not to put the AC power cord between the  
base and the unit.  
3
Drive Phillips head screws  
into the 3 threaded holes at  
the bottom of the base until  
they are tight.  
Note  
• If you lose the screws, please purchase M4×12 Phillips head screws  
at your local store.  
• If you need to replace these accessories, please refer to the part  
No. with the illustrations and call our toll free customer support  
line found on the cover of this manual.  
To remove the base from this unit  
• Unscrew the Phillips head screws in step 3.  
After the screws are removed, move the base in the opposite  
direction as shown by arrow in step 2, then pull the base up toward  
the rear of the unit. Be careful not to drop the base when you  
remove it.  
When using a universal remote control to operate this unit.  
• Make sure the component code on your universal remote control  
is set to our brand. Refer to the manual accompanying your  
remote control for more details.  
• We do not guarantee 100% interoperability with all universal  
remote controls.  
Note  
• When attaching the base, ensure that all screws are tightly fastened.  
If the base is not properly attached, it could cause the unit to fall,  
resulting in injuries as well as damage to the unit.  
• Make sure to use a table which can support the weight of this unit  
and is larger than this unit.  
Mounting the Unit onYour Furniture  
Screw this unit on your furniture tightly using wood screws  
• Make sure the table is in a stable location.  
• When attaching the base, ensure that FRONT written on the  
(not supplied) in the 2 holes at the back of the base as shown.  
base is upward. If it’s not upward, the 2 hooks don’t t in the base.  
• Recommended screw dimension : 0.201 x 0.788 inches(5.1 x 20 mm)  
rear of this unit  
Installing the Batteries  
Install the batteries (AA, 1.5V x 2) matching the polarity  
indicated inside battery compartment of the remote control.  
screw holes  
Note  
• When you remove this unit make sure to unscrew the wood  
screws from your Wood Stand, Furniture and other wood item.  
Battery Precautions:  
• Be sure to follow the correct polarity as indicated in the battery  
compartment. Reversed batteries may cause damage to the  
device.  
• Do not mix different types of batteries together (e.g.Alkaline and  
Carbon-Zinc, or rechargeable batteries like ni-cad, ni-mh, etc) or  
old batteries with fresh ones.  
Tilt Stand  
You can adjust the stand to  
change the angle of the unit  
(-2.5° to 10°).  
-2.5°  
10°  
• If the device is not to be used for a long period of time, remove  
the batteries to prevent damage or injury from possible battery  
leakage.  
• Do not try to recharge batteries; they can overheat and rupture.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
English  
13 DISC MENU  
14 TITLE  
p.29  
Remote Control Function  
p.29  
1
2
15 A EJECT  
16 AUDIO  
p.29  
15  
p.7, 15, 32  
Digital mode (DTV)  
• Press to select the audio language.  
Analog mode (TV)  
3
• Press to select the audio mode.  
16  
17  
DVD mode  
• Press to select the audio language (DVD), or sound  
mode (CD).  
4
5
6
18  
17 SLEEP  
Press to activate the sleep timer.  
p.14  
18 SCREEN MODE  
p.15  
Press to select aspect ratio available for theTV screen.  
7
8
19  
20  
21  
11  
19 INFO  
Digital mode (DTV)  
p.16, 32  
• Press to display the channel information, signal type and  
TV setting.  
9
10  
Analog mode (TV)  
• Press to display the channel number, signal type andTV  
setting.  
11  
12  
22  
23  
External input mode  
• Press to display the external input mode, signal type  
andTV setting.  
13  
14  
24  
25  
DVD mode  
• Press to display the current status.  
1 INPUT SELECT  
2 POWER  
Press to turn the unit on and go into standby mode.To  
completely turn off the unit, you must unplug the AC  
power cord.  
p.14  
p.13  
20 CH /▼  
21 REV E/FWD D  
22 STOP C  
p.14  
p.29, 30  
p.29  
3 Number buttons  
- (hyphen)  
p.14  
23 PLAY B  
p.29  
24 CLEAR  
p.30, 31  
• Press to shift the subchannel from the main channel.  
• Press to clear the numbers entered incorrectly.  
• Press to cancel the point A for A-B repeat.  
+10 button  
• Press to select 10 or higher number of chapters.  
• Press to remove the track number in program input  
(CD).  
4 SETUP  
p.17  
p.13  
p.13  
p.16  
p.14  
25 MODE  
p.7  
5 ENTER  
• Press to arrange the playing order or playback  
randomly (CD).  
6 ///(cursor)  
7 BACK  
• Press to set the black level (DVD) and the virtual  
surround on or off.  
• Press to change the camera angle to see the sequence  
being played back from different angle (DVD).  
8 CH RETURN  
Press to return to previously viewed channel.  
• Press to search chapter, title (DVD), track (CD) or time.  
• Press to set the marker.  
• Press to repeat playback chapter, title (DVD), track, disc  
(CD) repeatedly or between designated point A and B.  
• Press to magnify the part of picture (2x and 4x : DVD).  
• Press to select the subtitles on the disc (DVD).  
9 VOL. /▼  
p.15  
p.15  
p.30  
10  
MUTE  
11 SKIP H/G  
Press to skip forward or backward chapters, titles (DVD)  
or tracks (CD).  
12 PAUSE F  
p.14, 29  
TV mode  
• Press to pause screen image.  
DVD mode  
• Press to pause the disc playback.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
10  
Control Panel  
1
(power)  
p.13  
Press to turn the unit on and go into standby mode.To  
completely turn off the unit, you must unplug the AC  
power cord.  
2 B (play)  
3 C (stop)  
4 A (eject)  
5 CH /▼  
p.29  
p.29  
p.29  
p.14  
Press to select channels or move up ()/down ()  
through the main menu items.  
8
6 SETUP  
7 VOL /▼  
p.17  
p.15  
9
10  
11  
Press to adjust the volume or move right ()/left ()  
through the main menu items.  
8 DVD indicator  
Lights up orange when a disc is inserted.  
9 STAND BY indicator  
Lights up red when the unit goes into standby mode.  
7
6
5
4
3
2
1
10 POWER ON indicator  
Lights up green when power is on.  
11 Infrared sensor window  
Receives infrared rays transmitted from the remote  
control.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
English  
Terminals  
16  
Side Panel  
12 HDMI 2 Input jack  
13 S-Video/CompositeVideo/Audio (L/R) Input jacks  
p.12, 34  
15  
*
forVIDEO  
p.34, 35  
14 Headphone Audio Output jack  
Headphone connection for personal listening.  
Rear Panel  
15 Antenna Input jack  
p.12  
12  
16 Disc loading slot  
17 AC power cord  
p.29  
HDMI 2  
p.12  
17  
18  
18 PC (VGA) Input jack  
19 HDMI 1 Input jack  
p.35  
p.12, 34  
20 ComponentVideo and Audio (L/R) Input jacks  
19  
13  
14  
p.12, 34  
21 Digital Audio Output jack  
p.35  
20  
21  
HEAD PHONE  
22 Analog Audio (L/R) Input jack for PC connection  
p.35  
22  
Mini-plug audio cable connection from PC.  
23 Analog Audio (L/R) Input jacks for HDMI 1  
23  
p.34  
Audio cable connection from a DVI device.  
(For HDMI 1 Input jack only)  
Note for service terminal  
service terminal (service use only)  
• Use this terminal only when a software update is necessary.  
• User should not connect any devices to the service terminal such  
as digital camera, keyboard, mouse, etc. (because these will not  
work).  
*
• The software update is, in most cases, handled by an authorized  
service person or in some circumstances the user may be asked  
to do the software update themselves.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12  
Connection to Cable Receiver or  
Satellite Box  
PREPARATION  
Use an HDMI or component video cables to connect the  
HDMI or the ComponentVideo Input jacks of the unit to  
the HDMI or the component video output jacks of the cable  
receiver/satellite box.  
No supplied cables are used with these connections:  
• Please purchase the necessary cables at your local store.  
If you connect to the unit’s ComponentVideo Input jacks,  
connect audio cables to the Audio L/R Input jacks right beside  
the ComponentVideo connector.  
Before you connect:  
Be sure your antenna or other device is connected properly  
before plugging in the AC power cord.  
component video cables  
(red/blue/green) and audio cables  
Antenna Connection  
Connect the RF coaxial cable on your home outlet to the  
(green) (blue) (red)  
antenna input jack of this unit.  
AUDIO OUT  
COMPONENT VIDEO OUT  
HDMI OUT  
L
R
Y
Pb/Cb  
Pr/Cr  
or  
VHF/UHF  
analog  
or  
STEREO  
PCM  
DTV antenna  
cable receiver/  
satellite box  
ANT IN  
or  
HDMI cable  
RF coaxial cable  
satellite dish  
or  
RF coaxial cable  
or  
cableTV signal  
includding PPV  
You can also connect this unit to the cable receiver or satellite  
box other than the HDMI or the component video output jacks  
because they might have different output jacks.  
cableTV signal  
Required cables and connecting methods of the cable receiver/  
satellite box, or the availability channel for the clear QAM may  
differ depending on the cable/satellite provider.  
Once connections are completed, turn on the unit and begin  
initial setup. Channel scanning is necessary for the unit to  
memorize all available channels in your area. [Initial Setup]  
For more information, please contact your cable/satellite provider.  
Note  
p.13  
• Use an HDMI cable with the HDMI logo (a certied HDMI cable).  
High Speed HDMI cable is recommended for the better  
compatibility.  
Note  
• If you have any question about the DTV’s antenna, visit  
• Depending on your antenna system, you may need different types  
of combiners (mixers) or separators (splitters). Contact your local  
electronics store for these items.  
• For your safety and to avoid damage to this unit, please unplug the  
RF coaxial cable from the antenna input jack before moving the  
unit.  
• If you did use an antenna to receive analogTV, it should also  
work for DTV reception. Outdoor or attic antennas will be more  
effective than a set top or inside antenna.  
To switch your reception source easily between antenna and cable,  
install an antenna selector.  
Plug In the AC Power Cord  
Make sure that the AC power cord must be plugged to an AC  
outlet after all the necessary connections are made.  
Caution:  
• Do not connect the AC power cord to a power supply outside  
the indicated voltage of this unit (AC 120V).  
Connecting the AC power cord to a power supply outside of this  
range may result in re or electrical shocks.  
• If you are not receiving a signal from your cable service, contact the  
Cable provider.  
Note  
• Each time you plug in the AC power cord, no operations will be  
performed for a few seconds.This is not a malfunction.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
English  
4
Use /to select the desired location setting, then press  
ENTER.  
These operations are accessible by remote control.  
Some may also be accessible by controls on the main unit.  
Initial Setup  
Select “Retail” or “Home” for your location.  
Initial Setup  
This section will guide you through the unit’s initial setting  
which includes selecting a language for your on-screen menu  
and autoprogram, which automatically scans and memorizes  
viewable channels.  
Home  
Retail  
Select  
ENTER  
Enter  
Before you begin:  
Make sure the unit is connected to antenna or cable.  
• Select [Retail] store, the unit will be set up with  
predefined setting for retail displays. In this setting, the  
power consumption may possibly exceed the limited  
requirement of the ENERGY STAR® qualification.  
• Select [Home], the unit is set to maximize the energy  
efficiency for home setting and it can be adjusted  
through a choice of picture and sound quality according  
to your preference.  
1
After making all the necessary connections,  
press POWER to turn on the unit.  
• It may take a few moments to turn on the unit for the  
first time.  
[Initial Setup] menu appears automatically after the  
unit is turned on.  
• When the initial setup is completed, the lowest  
memorized channel with the confirmation message of  
the location setting will be displayed on theTV screen.  
2
3
Use /to select the on-screen language from the  
choices (English/Español/Français) on the right side of the  
TV screen, then press ENTER.  
Note  
Use /to select [Antenna] forTV channels or [Cable]  
for CATV channels, then press ENTER.  
• If you are not receiving a signal from your cable service, contact  
the Cable provider.  
• If you press POWER or SETUP during autoprogram, this setting  
will be canceled.  
• The initial autoprogram function can be executed for either  
[Antenna] or [Cable] only once.When you change the  
Initial Setup  
Antenna  
Make sure the antenna is connected to ''ANT. IN'' jack.  
Cable  
Select your signal source.  
Skip  
connection (Antenna/Cable), set [Autoprogram] again.  
• If there is no signal input from the antenna terminal and no  
p.19  
operation for several seconds after you turn on the unit, helpful  
hints appears. Follow the instructions listed on theTV screen.  
Antenna  
Or  
Cable  
ANT.IN  
Initial Setup  
Retry  
Later  
ENTER  
Select  
Enter  
Back  
Skip  
No channel is registered.  
Try Autoprogram again?  
[Autoprogram] will begin.  
Verify that you have a cable connected to the “ANT. IN” jack  
on the back of the TV, the channel installation process  
searches this connection. If you are using a cable or satellite  
box, please confirm the input which you have connected to the  
box and press “INPUT SELECT” key on the remote control to  
select the appropriate source input.  
Initial Setup  
Please wait while the system is scanning for channels.  
Auto programming may take more than 20 minutes to  
complete.  
ENTER  
Select  
Enter  
Skip  
0%  
You must set [Home] in step 4. Otherwise, [Picture] and [Sound]  
settings you adjusted will not be memorized after the unit goes  
into standby mode.  
Digital channels  
Analog channels  
0 ch  
0 ch  
Skip  
After an initial setup is completed...  
• If you want to scan the channels automatically again.  
[Autoprogram]  
p.19  
You can add the desired cable and analog channels  
unmemorized by autoprogram.  
[Add Channels]  
p.20  
• If you want to change to another language.  
[Language] p.25  
• If you want to change the location setting.  
[Location] p.24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
WATCHINGTV  
SleepTimer  
can set the unit to go into standby mode after an incremental period of time.  
Press SLEEP repeatedly to change the amount of time (increases  
the time by 30 minutes up to 120 minutes).  
Sleep  
120min.  
Press SLEEP once to call up the display for checking the remaining time.  
To cancel sleep timer, press SLEEP repeatedly until [Sleep Off] is  
displayed.  
Switching Each Input Mode can easily switch with the remote control  
betweenTV (ATSC or NTSC) and external devices when they are connected to the unit.  
Press INPUT SELECT or CHrepeatedly to cycle through the input modes.  
Input Select  
e.g.)  
TV  
V
C
H
H
i
d
eo
om
onent  
I1
I2  
PC  
11-1  
Video  
Component  
HDMI1  
p
D
D
M
DTV/TV channel  
M
PC  
HDMI2  
Pressing CHreverses the direction of the input modes.  
Channel Selection  
Select channels by using CH/or the Number buttons.  
To select the memorized channels,  
use CH/or the Number buttons.  
To select the non-memorized channels,  
use the Number buttons.  
11-1  
To use the Number buttons  
ATSC  
-
When selecting digital channel 111  
Be sure to press before entering the subchannel number.  
NTSC  
-
When selecting cable or analog channel 11  
Press CH RETURN to return to the previously viewed channel.  
[No Signal] will appear on theTV screen after the subchannel  
broadcast is over.  
Note  
[Audio only program] message will appear on theTV screen, when you  
receive only sound signal.  
Still Mode can freeze the image shown on theTV screen for 5 minutes.  
Press PAUSE F to freeze the image.  
Still  
The sound output will not be paused.  
To cancel freeze mode, press any buttons except POWER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
English  
TV Screen Display Mode  
5 types of display modes can be selected when the broadcasting station is sending 16:9 or 4:3 video signal.And 3 types of display  
modes can be selected for PC input signal.  
Press SCREEN MODE repeatedly to switch theTV aspect ratio.  
Normal displays a 16:9 picture at its original size.  
For 16:9 video signal  
4:3 displays a 16:9 picture at a 4:3 size; the picture is  
shortened horizontally. Sidebars appear on both edges  
of the screen.  
Movie expand displays a 16:9 picture that is  
vertically stretched to ll the screen.This only crops  
Movie expand  
out the top of the picture.  
Normal  
4:3  
Zoom displays a 16:9 picture at its maximum size  
without changing its horizontal and vertical ratio.  
Wide displays a horizontally stretched picture.This  
crops out the left and right sides of the picture.  
Wide  
Zoom  
Normal displays a 4:3 picture at its original size.  
Sidebars appear on both edges of the screen.  
For 4:3 video signal  
16:9 displays a 4:3 picture at a 16:9 size; the picture is  
stretched horizontally to ll the screen.  
Movie expand displays a 4:3 picture at a 16:9 size;  
the picture is stretched more vertically at the top of  
Movie expand  
the screen.This crops out the top of the picture.  
Normal  
16:9  
Zoom displays a 4:3 picture at a 16:9 size; at its  
maximum size that is more vertically stretched to ll  
the screen.This crops out the top and bottom of the  
picture.  
Wide displays the picture with its center at the  
original size and the edges stretched horizontally to ll  
the screen.  
Wide  
Zoom  
Normal displays a proportionately stretched picture.  
Sidebars appear on both edges of the screen.  
For PC input signal  
Full displays a picture that is stretched out of  
proportion horizontally to ll the screen.  
Dot By Dot displays a picture in its original size.  
Normal  
Full  
Dot By Dot  
Sound Functions  
describe how to change the audio or the audio language as well as the volume.  
Volume Adjustment  
Use VOL./to adjust the volume.  
Volume  
30  
Silence Mode  
will be displayed for a few seconds when adjusting the volume.  
Press MUTE to turn off the sound temporarily.  
Mute  
will be is displayed for a few seconds.  
Press MUTE again or VOL./to recover the original  
volume.  
Switching Audio Mode  
ATSC  
NTSC  
Press AUDIO repeatedly to cycle through the available audio  
Press AUDIO to display the currently selected audio mode.  
While receiving an MTS broadcast, press repeatedly to cycle  
through the available audio channel.  
languages.  
Available languages differ depending on the broadcast.  
[Other] is displayed when the audio language cannot be  
acquired, or the acquired languages are other than English,  
Spanish or French.  
11  
SAP / STEREO  
e.g.) When all audio are available  
111  
English 1/3  
SAP / STEREO  
SAP / MONO  
SAP / STEREO  
STEREO : Outputs stereo-audio  
SAP  
: Outputs second audio program  
MONO : Outputs mono-audio  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
TV Screen Information  
You can display the currently selected channel or other  
information such as the audio mode on theTV screen.  
In the digital mode, the detailed broadcasting information for  
the current channel such as program title, program guides are  
displayed.  
1
Press INFO.  
ATSC  
1
2
3
4
A
A
Day of Memories  
KABC  
11-1  
English 1/2  
5
quarter-century ago,which may now qualify as the  
good old days of newspapering,run-of-paper sales  
accounted for 80 percent of the industry's advertising  
revenues.Department stores and supermarket were  
1080i HD  
16:9  
16:9  
6, 7, 8  
CC  
Rating  
TV: TV-14  
9
10  
NTSC  
4
5
SAP / STEREO  
6, 7, 8  
9
10  
1
2
program title  
program guide  
(The program guide added to broadcasting  
information is displayed to a maximum of 4 lines.)  
broadcast station  
channel number  
3
4
5
audio language (ATSC)/audio mode (NTSC)  
[Switching Audio Mode]  
effective scanning lines and scan mode  
TV format  
p.15  
6
7
8
9
program’s image aspect ratio  
CC (not available if closed caption is set to [Off])  
10 child lock rating  
2
Press INFO or BACK to hide the information.  
Note  
• When the program guide consists of more than 4 lines, use /▼  
to scroll to the next/previous lines.  
[No description provided.] is displayed when the program guide  
is not provided.  
• While the program guide is displayed, the closed caption function  
is interrupted.  
• In external input mode, the following screen is displayed;  
e.g.) When an external device is connected toVideo Input jack.  
Video  
480i SD  
CC  
TV-PG DLSV  
• The information display will automatically disappear in 1 minute.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
English  
USING FUNCTIONS  
This section describes the overview of the main menu  
displayed when you press SETUP.  
The main menu consists of the function setting items below.  
1
Press SETUP to display  
the main menu.  
2
Use /to select a desired menu and an item,  
then press ENTER to determine the setting.  
Picture  
Page 18  
Picture  
Sound  
Adjusting the picture mode, or customize the  
picture quality as your preference.  
Channel  
Features  
Language  
DVD  
Sound  
Page 18  
Adjusting the sound mode, equalizer and some  
other sound functions.  
Channel  
Page 19  
Scanning the channels available in your area and  
see what the antenna levels are.  
Features  
Page 20  
Adjusting the Closed Caption, parental guide and  
some other useful functions.  
Language  
Page 25  
You can choose English, Spanish, or French  
as your on-screen language.  
DVD  
Page 25  
You can choose the desired DVD settings.  
3
When the setting is completed, press SETUP to exit.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
Sound  
Picture  
Sound  
Picture  
Sound Mode  
Equalizer  
Standard  
TV Speakers  
Primary MTS  
Ext. Amp  
Stereo  
Before you begin:  
Channel  
Features  
Language  
DVD  
You must set [Home] in [Location]. p.24  
Otherwise, the settings you adjusted will not be memorized  
after the unit goes into standby mode.  
1
Use /to select the item you want to adjust, then press  
ENTER.  
2
Adjust the following items.  
Picture  
Picture  
Picture Mode  
Brightness  
Contrast  
Personal  
Sound Mode  
Use /to select the desired setting, then press ENTER.  
([Personal], [Standard], [Movie], [Music], and [News])  
Sound  
30  
60  
36  
0
Channel  
Features  
Language  
DVD  
Color  
Tint  
Equalizer  
Adjust tonal quality for each frequencies.  
Sharpness  
Color Temperature  
0
Normal  
Use /to select the specic frequency and use /to  
adjust the level, then press ENTER.  
2
Adjust the following items.  
TV Speakers  
Select the audio output from the unit’s speakers, or not. If your  
amplier is HDMI link function compatible and connected by  
an HDMI cable to this unit, some sound operations such as  
volume up can be changed by using this unit’s remote control.  
Picture Mode  
Use /to select the desired setting, then press ENTER.  
([Personal], [Standard], [Sports], [Movie], and [Game])  
Make sure [fun-Link Control] is set to [On].  
p.24  
Brightness, Contrast, Color, Tint, Sharpness,  
Use /to select the desired option, then press ENTER.  
ColorTemperature  
You can only adjust the following options when you set to  
[Personal] in [Picture Mode].  
On  
The sound will be output from the unit’s speakers.  
The sound will not be output from the unit’s  
speakers.  
Off  
You can control audio output from your  
connected HDMI link devices by using this unit's  
remote control.  
Use /to select the desired setting, then press ENTER.  
Then use /to adjust the setting.  
Ext. Amp  
Cursor  
Cursor ►  
Note  
Brightness  
Contrast  
to decrease brightness to increase brightness  
• We do not guarantee 100% interoperability with other brands of  
HDMI link compliant devices.  
to decrease contrast  
to increase contrast  
to decrease color  
intensity  
to increase color  
intensity  
Color  
Primary MTS  
You can set the output mode as a default for the sound mode  
(NTSC only).  
This setting is not interlocked when you change the output  
mode by pressing AUDIO. [Sound Functions]  
Tint  
to add red  
to soften  
to add green  
to sharpen  
Sharpness  
Color  
Temperature  
to add warm colors  
to add cool colors  
p.15  
Use /to select the desired option, then press ENTER.  
Sound  
Stereo  
Mono  
SAP  
Outputs stereo-audio.  
Outputs mono-audio.  
Before you begin:  
Outputs second audio program.  
You must set [Home] in [Location]. p.24  
Otherwise, the settings you adjusted will not be memorized  
after the unit goes into standby mode.  
1
Use /to select the item you want to adjust, then press  
ENTER.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
English  
Note  
Channel  
• After setting [Autoprogram], using CH /on the remote  
control skips unavailable programs automatically.  
• If you are not receiving a signal from your cable service, contact  
the Cable provider.  
• If you press POWER or SETUP during autoprogram, the setting  
will be canceled.  
Before you begin:  
Make sure the unit is connected to antenna or cable.  
• Even if [Autoprogram] is completed, the channel setting will be  
lost if the AC power cord is unplugged before the unit goes into  
standby mode by pressing POWER.  
1
Use /to select the item you want to adjust, then press  
ENTER.  
• The PIN code will be required once you set a PIN code in the  
Channel  
Picture  
[Child Lock].  
p.21  
• If you want to change your PIN code, follow the instruction of  
[Change PIN].  
Autoprogram  
p.23  
Sound  
Channel List  
Add Channels  
Antenna  
Channel  
Features  
Language  
DVD  
Channel List  
The channels selected here can be skipped when selecting the  
channels using CH /.  
Those channels can still be selected with the Number buttons.  
1
2
Use /to select [Channel List], then press ENTER.  
Use /to select the channel you want to remove, then  
press ENTER.  
2
Adjust the following items.  
Channel List  
Picture  
Autoprogram  
If you switch wires (e.g. between antenna and CATV) or if you  
DTV  
DTV  
6-1  
8-1  
9
Sound  
move the unit to a different area after the initial setting, or if  
you restore the DTV channels you deleted, it is recommended  
to use Autoprogram to perform a new channel search.  
Highlight channels for  
Ch Up / Down key selection.  
Channel  
Features  
Language  
DVD  
27  
DTV  
DTV  
48-1  
58  
1
2
Use /to select [Autoprogram], then press ENTER.  
67-1  
Use /to select an appropriate option, then press  
ENTER.  
ENTER  
Ch Select  
Watch/Skip  
Back  
• The channel display for the removed channel darkens.  
You will not be able to select the channel again using  
CH /.  
To reactivate a removed channel, use /and press  
ENTER.The registered channels are highlighted.  
• When you remove a main channel, its subchannels are  
removed as well.  
Autoprogram  
Picture  
Back  
Auto program will rescan all channels.  
Auto programming may take more than 20  
minutes to complete.  
Sound  
Antenna  
Cable  
Select your signal source.  
Channel  
Features  
Language  
DVD  
Antenna  
Note  
Cable  
Or  
ANT.IN  
• The channel with the [DTV] indicated on the display is ATSC.  
Otherwise the channel is NTSC.  
• When connected toVHF/UHF antenna, select [Antenna].  
• When connected to CATV, select [Cable].  
[Autoprogram] will begin.  
Please wait while the system is scanning for channels.  
Auto programming may take more than 20 minutes to  
complete.  
75%  
Digital channels  
Analog channels  
10 ch  
6 ch  
Exit  
• When the scanning and memorizing are completed, the  
lowest memorized channel will be displayed.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
Add Channels  
Features  
This function lets you add the channels that were not added  
by the autoprogram due to reception conditions at the initial  
setting.  
1
Use /to select the item you want to adjust, then press  
ENTER.  
1
2
Use /to select [Add Channels], then press ENTER.  
Features  
Picture  
Use the Number buttons to enter the number of the  
channel you want to add, then press ENTER.  
Closed Caption  
Sound  
Child Lock  
11  
PC Settings  
Channel  
Features  
Language  
DVD  
fun-Link (HDMI CEC)  
Energy Saving Mode  
Location  
On  
Add Channels  
Picture  
Home  
Add Channels  
Current Software Info  
Sound  
For analog channels, select a  
channel to be added using number  
keys.  
Channel  
For digital channels, you must  
perform Autoprogram function.  
2
Adjust the following items.  
Features  
Language  
DVD  
Closed Caption  
Ch Change  
Back  
You can view closed captioning (CC) forTV programs,  
movies and news. Closed caption refers to text of dialog or  
descriptions displayed on-screen.  
Note  
• If setup completes successfully, [Added to the channel list.] is  
displayed.  
• If external input is used, it is not possible to register the channel  
and [Unavailable] will be displayed on theTV screen.  
• By using CH /, you can select the memorized channels only.  
Use /to select [Closed Caption], then press ENTER.  
See the following description for setting each item.  
Closed Caption  
Picture  
Caption Service  
Digital Caption Service  
Caption Style  
Off  
Off  
A
B
C
Sound  
Antenna Conrmation  
Channel  
Features  
Language  
DVD  
ATSC  
This function lets you check the digital signal strength of each  
channel.  
1
2
Use /to select [Antenna], then press ENTER.  
Use the Number buttons or CH /to select the  
channel for which you want to check the digital signal  
strength.  
A. Caption Service  
1
2
Use /to select [Caption Service], then press ENTER.  
11-1  
Use /to select the desired closed caption, then press  
ENTER.  
Antenna  
Off  
Select if you do not want caption service.  
Picture  
Sound  
Back  
The primary caption and text services.The  
captioning or text is displayed in the same language  
CC-1 andT-1 as the program’s dialog (up to 4 lines of script on the  
TV screen, where it does not obstruct relevant parts  
of the picture).  
Channel  
Features  
Language  
DVD  
Current 50 Max  
50  
Serve as the preferred data channels.  
CC-3 andT-3 The captioning or text is often a secondary  
language.  
Ch Change  
Rarely available and broadcasters use them only in  
CC-2, CC-4,  
special conditions, such as when [CC-1] and [CC-3]  
T-2 andT-4  
or [T-1] and [T-3] are not available.  
Note  
• If the channel is set to analog (cable) channel or external input,  
you cannot conrm the antenna condition.  
• There are 3 display modes according to programs:  
Paint-on  
mode  
Displays input characters on theTV screen  
immediately.  
Once characters are stored in memory, they are  
displayed all at once.  
Pop-on mode  
Displays the characters continuously by scrolling  
(max. 4 lines).  
Roll-up mode  
Download from Www.Somanuals.com. All Manuals Search And Download.  
21  
English  
Background  
Color  
B. Digital Captiioon SSeerrvice  
ATSC  
Background color and opacity of the  
displayed caption can be switched.  
Background  
Background  
Opacity  
In addition to the basic closed caption, DTV has its own closed  
caption called digital caption service. Use this menu to change  
the settings for digital caption service.  
Edge Color  
EdgeType  
Edge color and type of the displayed  
caption can be switched.  
Edge  
Note  
1
2
Use /to select [Digital Caption Service], then press  
ENTER.  
• Closed caption will not be displayed when you are using an HDMI  
connection.  
To show the closed caption on yourTV screen, broadcast signal  
must contain the closed caption data.  
• Not allTV programs and commercials have the closed caption or  
all types of the closed caption.  
• Captions and texts may not exactly match theTV voice.  
• Changing channels may delay the closed caption for a few seconds.  
• Adjusting or muting the volume may delay the closed caption for  
a few seconds.  
Use /to select the desired digital caption service, then  
press ENTER.  
Select if you do not want digital caption  
service.  
Off  
Select one of these before changing any  
other item in [Closed Caption] menu.  
Choose [CS-1] under normal circumstances.  
CS-1 to CS-6  
• Abbreviations, symbols and other grammatical shortcuts may be  
used in order to keep pace with the on-screen action.This is not  
a malfunction.  
• The caption or text characters will not be displayed while the  
main menu or functions display is shown.  
• If a black box appears on theTV screen, this means that the closed  
caption is set to the text mode.To clear the box, select [CC-1],  
[CC-2], [CC-3], [CC-4] or [Off].  
Note  
[Digital Caption Service] that you can switch differs depending on  
the broadcast description.  
• If the unit receives poor quality television signals, the captions may  
contain errors, or there might be no captions at all. Some possible  
causes of poor quality signals are:  
C. Caption Style  
ATSC  
- Automobile ignition noise  
- Electric motor noise  
- Weak signal reception  
You can change the caption style such as font, color or size,  
etc.  
- Multiplex signal reception (ghosts or screen utter)  
- Data dropout and Pixelation (for DTV only)  
• The unit retains the closed caption setting if the power fails.  
• When the unit receives special effects playback signal (e.g. Search,  
Slow and Still) from aVCR’s video output channel (ch3 or ch4),  
the unit may not display the correct caption or text.  
1
2
3
4
Use /to select [Caption Style], then press ENTER.  
Use /to select [User Setting], then press ENTER.  
Use /to select [On], then press ENTER.  
Child Lock  
Use /to select an item, then press ENTER. Then use  
/to select the desired setting and press ENTER.  
Child lock reads the ratings for programs, then denies access  
to the programs which exceed the rating level you set.With  
this function, you can block certain programs inappropriate  
for children and any channels or external input modes can be  
invisible.  
Picture display  
So, you must bee Philip. Hi!  
Im pleaseed to meet you.  
1
Use /to select [Child Lock], then press ENTER.  
Edge  
Features  
Picture  
(Edge Color and EdgeType)  
Font  
Closed Caption  
(Font Style, Font Size, Font Color and Font Opacity or  
Transparency)  
Sound  
Child Lock  
PC Settings  
Channel  
Features  
Language  
DVD  
Background  
fun-Link (HDMI CEC)  
Energy Saving Mode  
Location  
(Background Color and Backgroouunndd OOppaacciittyy oorr  
Transparency)  
On  
Home  
Current Software Info  
• Review your setting choice made below by looking in  
the upper right corner of the displayed setting box (not  
all selections show the differences selected).  
Font Style  
2
Use the Number buttons to enter the 4-digit number for  
your PIN code.  
Font Size  
Closed captioning font style, size,  
color and opacity can be changed.  
Font  
Font Color  
Channel  
Features  
Enter PIN.  
- - - -  
Font  
Opacity  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
• When you have not set up your PIN code,  
2
Use /to select the desired rating, then press ENTER  
repeatedly to switch between [View] and [Block].  
enter 0, 0, 0, 0.  
• When the PIN code is correct, [Child Lock] menu is  
displayed.  
See the following description for setting each item.  
US Movie Ratings Lock  
Picture  
X
Sound  
Child Lock  
Picture  
NC-17  
R
Channel Lock  
Channel  
A
B
PG-13  
Sound  
US Movie Ratings Lock  
US TV Ratings Lock  
Canadian English Rating  
Canadian French Rating  
Region Ratings Lock  
Clear Region Ratings Lock  
Change PIN  
Features  
Language  
DVD  
PG  
G
C
Channel  
Features  
Language  
DVD  
NR  
ENTER  
Select  
View/Block  
Back  
D
Rating  
Category  
X
Mature audience only  
Note  
• When you select a rating and set it to [Block], the higher ratings  
will be blocked automatically.The lower ratings will be available for  
viewing.  
• When you set the highest rating to [View], all ratings turn to  
[View] automatically.  
To block any inappropriate programs, set your limits in [US Movie  
Ratings Lock], [USTV Ratings Lock] and [Region Ratings Lock].  
• The child lock setting will be retained after a power failure or after  
the power is removed for longer than 10 seconds (except the PIN  
NC-17  
No one under 17 admitted  
Restricted; under 17 requires accompanying  
parent or adult guardian  
R
PG-13  
PG  
Unsuitable for children under 13  
Parental guidance suggested  
General audience  
G
NR  
No rating  
code reverts to 0000). [Child Lock]  
• If the rating is blocked, will appear.  
p.21  
C. SettingTV ratings  
[Region Ratings Lock] will be available when the unit receives a  
digital broadcast using the new rating system.  
• For the United States, the unit may download the Region Ratings  
LockTable, if required.  
• The Canadian rating systems on this unit are based on CEA-766-A  
and CRTC policy.  
1
2
Use /to select [USTV Ratings Lock], then press  
ENTER.  
Use ///to select the desired rating, then press  
ENTER repeatedly to switch between [View] and [Block].  
US TV Ratings Lock  
Picture  
A. Channel Lock  
Particular channels or external input modes can be invisible in  
this function.  
FV  
V
S
L
D
Sound  
TV-MA  
TV-14  
TV-PG  
TV-G  
Channel  
Features  
Language  
DVD  
1
2
Use /to select [Channel Lock], then press ENTER.  
TV-Y7  
TV-Y  
Use /to select the desired rating, then press ENTER  
repeatedly to switch between [View] and [Block].  
ENTER  
Select  
View/Block  
Back  
Channel Lock  
Picture  
Rating  
TV-MA  
Category  
Video  
Mature audience only  
higher  
Sound  
Component  
TV-14  
TV-PG  
TV-G  
Unsuitable for children under 14  
Parental guidance suggested  
General audience  
HDMI 1  
Channel  
HDMI 2  
PC  
Features  
DVD  
Language  
40-1 DTV  
Appropriate for all children 7 and  
older  
TV-Y7  
TV-Y  
DVD  
ENTER  
Select  
View/Block  
Back  
Appropriate for all children  
lower  
B. Setting US Movie ratings  
US Movie ratings lock is the rating system created by MPAA.  
To set the sub ratings  
As forTV-MA,TV-14,TV-PG, orTV-Y7, you can further set the  
sub ratings to block specic elements of programming.To set  
the sub ratings, follow the step below.  
1
Use /to select [US Movie Ratings Lock], then press  
ENTER.  
Use ///to select the desired rating, then press  
ENTER repeatedly to switch between [View] and [Block].  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
English  
PC Settings  
US TV Ratings Lock  
Picture  
Sound  
This function lets you adjust the PC screen position, clock and  
phase during PC input.  
FV  
V
S
L
D
TV-MA  
TV-14  
TV-PG  
TV-G  
1
2
Use /to select [PC Settings], then press ENTER.  
Channel  
Features  
Language  
DVD  
Use /to select the setting you want to adjust, then  
press ENTER.  
TV-Y7  
TV-Y  
PC Settings  
Picture  
Auto Adjustment  
Sound  
ENTER  
Select  
View/Block  
Back  
Horizontal Position  
0
Sub Rating  
FV  
Category  
Rating  
TV-Y7  
Channel  
Vertical Position  
Clock  
0
0
0
FantasyViolence  
Features  
Language  
DVD  
V
S
Violence  
Phase  
TV-MA  
TV-14  
TV-PG  
Sexual Situation  
Coarse Language  
Suggestive Dialog  
L
D
TV-14,TV-PG  
3
Adjust the following items.  
Note  
• Blocked sub rating will appear beside the main rating category in  
[USTV Ratings Lock] menu.  
You cannot block a sub rating (D, L, S orV) if the main rating is set  
to [View].  
• Changing the category to [Block] or [View] automatically changes  
all its sub ratings to the same ([Block] or [View]).  
Auto Adjustment  
Use /to select [Adjust], then press ENTER.  
Auto Adjustment  
Picture  
Cancel  
Adjust  
Sound  
To automatically synchronize  
the phase and clock  
on the TV and PC.  
D. Change PIN  
Although the default PIN code (0000) is supplied with the unit,  
you can set your own PIN code.  
Channel  
Features  
Language  
DVD  
1
2
Use /to select [Change PIN], then press ENTER.  
Press the Number buttons to enter the new 4-digit PIN  
code.  
• The horizontal/vertical position, clock and phase of the  
PC screen are automatically adjusted.  
• Enter PIN code again in [Confirm PIN.] entry field.  
Horizontal Position,Vertical Position  
Use /to adjust.  
Change PIN  
Picture  
Sound  
Cursor ◄  
Cursor ►  
Enter PIN.  
- - - -  
Channel  
Horizontal  
Position  
to move PC screen left to move PC screen right  
Confirm PIN.  
- - - -  
Features  
to move PC screen  
to move PC screen up  
down  
Vertical  
Position  
Language  
DVD  
PIN Code  
Back  
Clock, Phase  
Use /to adjust [Clock] setting to stabilize  
the PC screen and [Phase] setting to improve the clarity  
of the PC screen.  
Note  
• Make sure new PIN code and conrm PIN code must be exactly  
the same. If they are different, the space is cleared for reentering.  
Your PIN code will be erased and returns to the default PIN code  
(0000) when a power failure occurs.  
• If you forget the PIN code, unplug the AC power cord then wait  
for 10 seconds to plug the AC power cord in again.  
Cursor ◄  
Cursor ►  
Clock  
Phase  
to decrease setting  
value  
to increase setting  
value  
The unit will restore the PIN code to 0000 as the factory default.  
Note  
You may not obtain an appropriate screen with  
[Auto Adjustment] for some signals. In this case, adjust the settings  
manually.  
• Adjust [Phase] setting after [Clock] setting has been properly  
adjusted.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
24  
Device List  
fun-Link (HDMI CEC)  
This function lets you see the product model number or name  
of connected devices.  
This function allows you to operate the linked functions  
between our brand devices with a fun-Link feature and this  
unit connecting through an HDMI cable.  
Use /to select the desired HDMI device listed on theTV  
screen, then press ENTER.  
1
Use /to select [fun-Link (HDMI CEC)], then press  
ENTER.  
Device List  
Picture  
HDMI1  
HDMI2  
NB530MGX  
fun-Link (HDMI CEC)  
Picture  
Sound  
MBP1100 / F7  
fun-Link Control  
Auto Device Off  
Auto TV On  
On  
On  
On  
Channel  
Features  
Language  
DVD  
Sound  
Channel  
Features  
Language  
DVD  
Device List  
ENTER  
Select  
Input Change  
Back  
Energy Saving Mode  
You can set whether the power consumption is saved or not.  
2
3
Use /to select the desired setting, then press ENTER.  
Adjust the following items.  
1
2
Use /to select [Energy Saving Mode], then press  
ENTER.  
fun-Link Control  
Set the fun-Link [On] or [Off].  
The following additional settings will be grayed out when you  
set to [Off].  
Use /to select the desired mode, then press ENTER.  
On  
Reduces the power consumption.  
The power consumption may possibly exceed  
the limited requirement of the ENERGY STAR®  
qualification.  
Use /to select the desired setting, then press ENTER.  
Off  
Selects if you have connected an external device  
that is compatible with the fun-Link function.  
On  
Note  
Off  
Disables all fun-Link.  
You must set [Home] in [Location]. p.24  
Otherwise, the settings you adjusted will not be memorized after  
the unit goes into standby mode.  
Auto Device Off  
You can set your device to turn off by interlocking from this  
unit’s power.  
Location  
Use /to select the desired setting, then press ENTER.  
When you select [Retail] store, the power consumption may  
possibly exceed the limited requirement of the  
ENERGY STAR® qualication.  
Your connected fun-Link device turns off  
automatically when the unit goes into standby  
mode.  
On  
Your connected fun-Link device stays on even if  
the unit goes into standby mode.  
Off  
1
2
Use /to select [Location], then press ENTER.  
AutoTV On  
Use /to select the desired location, then press  
ENTER.  
This unit will turn on detected when the power on signal is  
sent from your connected fun-Link device.  
The unit will be set up with predefined setting  
for retail displays. In this setting, the power  
Retail  
Use /to select the desired setting, then press ENTER.  
consumption may possibly exceed the limited  
requirement of the ENERGY STAR® qualification.  
This unit turns on automatically when you turn on  
your connected fun-Link device.  
On  
The unit is set to maximize the energy efficiency  
for home setting and it can be adjusted through a  
choice of picture and sound quality according to  
your preference.  
This unit stays the standby mode even if you turn  
on your connected fun-Link device.  
Home  
Off  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
English  
Current Software Info  
This function shows what version of the software currently  
DVD  
used.  
Settings are only effective when the unit is in DVD mode  
and any discs should not be played back.  
1
2
Use /to select [Current Software Info], then press  
ENTER.  
1
Use /to select a desired setting and an item, then press  
ENTER to determine the setting.  
Conrm the version of the software currently used.  
Current Software Info  
Picture  
Back  
Sound  
Release Version:  
LANGUAGE  
Channel  
Features  
Language  
DVD  
XXXXXXX_XXX_X_XXXX  
AUDIO  
SUBTITLE  
DISC MENU  
ORIGINAL  
OFF  
ENGLISH  
ENTER/OK  
Language  
2
When the setting is completed, press SETUP to exit.  
Use /to select [English], [Español] or [Français], then  
press ENTER.  
DVD Language Setting  
You can change the desired language when playing back the disc.  
Language  
Picture  
Select the language for setup display.  
English  
Español  
1
2
Use /to select the item you want to adjust, then press  
ENTER.  
Sound  
Channel  
Features  
Language  
DVD  
Elija el idioma de ajuste.  
Adjust the following items.  
Français  
(Default: ORIGINAL)  
(Default: OFF)  
AUDIO *1, *2  
Select the desired audio language.  
Sélectionner langue écran config.  
SUBTITLE *1, *2  
Select the desired subtitle language.  
Note  
(Default: ENGLISH)  
DISC MENU *1  
• If you need the English menus instead of the Spanish or French  
menus, press SETUP. Use /to select [Idioma] or [Langue],  
then press ENTER.  
Use /to select [English], then press ENTER.  
Press SETUP to exit the main menu.  
Select the desired language in DVD menu.  
Note  
To change the on-screen language, call up [Language] from the  
main menu and set the desired language. [Language]  
p.25  
*1  
• Language options are not available with some discs.  
• If [OTHER] is selected in [AUDIO], [SUBTITLE] or  
[DISC MENU] menu, press 4-digit number to enter the code for  
the desired language. [Language Code List]. p.27  
• Only the languages supported by the disc can be selected.  
*2  
• Language setting for Audio and Subtitle are not available with  
some discs.  
-
-
Use MODE to select subtitles available on the DVD.  
Use AUDIO to select audio available on the DVD.  
• If the DVD’s default settings for audio and subtitle are the same  
language, the subtitles may not show unless you turn them on.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
DVD Audio Setting  
Choose the appropriate audio settings for your equipment. It only  
affects during the playback of DVD.  
Parental Setting  
Parental setting prevents your children from viewing inappropriate  
materials. (password protected.) Playback will stop if the ratings  
exceed the levels you set.  
1
Use /to select the desired item, then press ENTER.  
1
Use the Number buttons to enter the 4-digit password for  
your password, then press ENTER.  
AUDIO  
PARENTAL  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
PASSWORD  
Please enter a 4-digit password.  
ENTER/OK  
ENTER/OK  
2
Adjust the following items.  
• If you have set password already, use  
the Number buttons to enter the current 4-digit  
password.  
You cannot use the default password (4737) to play  
back a DVD.  
(Default: ON)  
DRC (dynamic range control)  
This function is available only on the discs which are recorded  
in the Dolby Digital format.  
Compress the range between soft and loud  
sounds.  
ON  
2
3
Use /to select the [PARENTAL LEVEL], then press  
ENTER.  
OFF  
No effects (original sound).  
Use /to select the desired item, then press ENTER.  
(Default: ON)  
DOWN SAMPLING  
This function is available only on digital outputting of a disc  
recorded in 96kHz.  
PARENTAL LEVEL  
ALL  
All parental locks are cancelled.  
ON  
When outputting in 48kHz.  
All ratings (adult/general/children) can be  
played back.  
8 [ADULT]  
OFF  
When outputting the original sound.  
Only DVD intended for general use and  
children can be played back.  
7 [NC-17]-2 [G]  
1 [KID SAFE]  
Note  
• When playing back a 96 kHz disc with the copyright protection  
or when [Virtual Surround] is set to [1] or [2], the sound will be  
down sampled at 48 kHz even if the [DOWN SAMPLING] is set  
Only DVD intended for children can be played  
back.  
To change the password  
to [OFF]. [Virtual Surround].  
p.33  
4
5
At step 2, use /to select [PASSWORD CHANGE]  
then press ENTER.  
(Default: BITSTREAM)  
Set to [BITSTREAM] when this unit is connected to a Dolby  
DOLBY DIGITAL  
Use the Number buttons to enter the new 4-digit  
password.  
Digital decoder.  
BITSTREAM Outputs Dolby Digital signals.  
Note  
• DVD-video may not respond to parental lock settings. Make sure  
this function works with your DVD-video.  
PCM  
Converts the Dolby Digital into PCM. (2 channel)  
• Record the password in case you forget it.  
• If you forget the password, press 4, 7, 3, 7, then enter your new  
password. Password will be cleared and parental levels will be set  
to [ALL].  
• A power failure will not erase your password.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
27  
English  
Language Code List  
Others  
You can change the other functions.  
Language  
Code  
Language  
Code  
Lithuanian  
Macedonian  
Malagasy  
Malay  
5866  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
A-B  
1
Use /to select the desired item, then press ENTER.  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Malayalam  
Maltese  
Maori  
Marathi  
OTHERS  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Moldavian  
Mongolian  
Nauru  
ANGLE ICON  
STILL MODE  
ON  
AUTO  
Nepali  
AUTO POWER OFF ON  
Norwegian [NOR]  
O-R  
Basque  
ENTER/OK  
Bengali;Bangla  
Bhutani  
Occitan  
Oriya  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Bihari  
Bislama  
Oromo(Afan)  
Panjabi  
Breton  
Bulgarian  
Burmese  
Byelorussian  
Pashto;Pushto  
Persian  
2
Adjust the following items.  
Polish [POL]  
Portuguese [POR]  
Quechua  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
S
C-E  
(Default: ON)  
ANGLE ICON  
Set to [ON] to show the angle icon when multiple camera  
angles are available during DVD playback.  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
Chinese [CHI]  
Corsican  
Croatian  
Czech [CZE]  
(Default:AUTO)  
STILL MODE  
Set the picture quality in the still mode.  
If you select [AUTO], it automatically selects the best  
resolution setting ([FRAME] or [FIELD]) based on the date  
characteristics of the pictures.  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
Serbo-Croatian  
Sesotho  
Setswana  
Shona  
F-H  
FIELD  
Faroese  
Fiji  
5261  
5256  
5255  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
The picture in the still mode will be stabilized.  
FRAME  
The picture in the still mode will be highly defined.  
Sindhi  
Finnish [FIN]  
French [FRE]  
Frisian  
Singhalese  
Siswat  
(Default: ON)  
Slovak  
Galician  
AUTO POWER OFF  
Set to [ON] if there is no operation for 20 minutes, the unit  
goes into standby mode.  
Slovenian  
Somali  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Spanish [SPA]  
Sundanese  
Swahili  
Swedish [SWE]  
T
Gujarati  
Hausa  
Reset to the Default Setting  
You can reset all the settings except for the parental setting and  
on-screen menu language.  
Hebrew  
Tagalog  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Hindi  
Tajik  
Hungarian [HUN]  
I-K  
Tamil  
Tatar  
Telugu  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
1
Use /to select [YES], then press ENTER.  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Irish [IRI]  
Italian [ITA]  
Japanese [JPN]  
Javanese  
Turkish [TUR]  
Turkmen  
Twi  
INITIALIZE  
Kannada  
U-Z  
Initialize?  
NO  
YES  
Kashmiri  
Ukrainian  
Urdu  
Uzbek  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Kazakh  
Kinyarwanda  
Kirghiz  
ENTER/OK  
Vietnamese  
Volapuk  
Welsh  
Kirundi  
Korean [KOR]  
Kurdish  
Wolof  
Xhosa  
L-N  
Yiddish  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
5861  
5847  
5868  
5860  
Note  
Yoruba  
Zulu  
• When you want to cancel the initialization, select [NO], then press  
ENTER.  
Note  
• If you choose a language that has a 3-letter abbreviation, the code  
will be displayed every time you change the audio or subtitle  
language setting above. If you choose any other language, [---] will  
be displayed instead. (3-letter abbreviation is written in bracket.)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
28  
Unplayable Media  
NEVER play back the following discs. Otherwise, malfunction  
may result!  
OPERATING DVD  
3 inches (8 cm) disc  
DVD-RAM  
DVD-audio  
CD-i  
Photo CD  
Video CD  
DVD with region codes other than 1 or ALL  
DTS-CD  
DVD-ROM for personal computers  
CD-ROM for personal computers  
The discs with labels, scratches, stains, blemishes, etc.  
HD DVD  
Blu-ray Disc  
DVD or CD contains MP3/JPEG les  
KODAK Picture CD  
Playable Media  
Recorded  
MediaType  
Logo  
Media Size  
Signal  
DVD-VIDEO  
digital video  
(MPEG2)  
DVD-RW  
On the following disc, the sound MAY NOT be heard.  
Super audio CD  
DVD-R  
CD-DA  
5 inches  
(12 cm)  
Any other discs without compatibility indications  
Note  
• Unnalized discs cannot be played back.  
• For DVD-RW/-R, discs recorded in theVR (video recording)  
format cannot be played back. Only the nalized video format  
discs can be played back.  
• Some discs cannot be played back because of incompatible  
recording conditions, characteristics of the recorder or special  
properties of discs.  
• Only the sound recorded on the normal CD layer can be  
delivered.The sound recorded on the high density super audio  
CD layer cannot be delivered.  
• Do not use a single CD adaptor which makes 3 inches (8 cm) to  
5 inches (12 cm) disc.  
You can play back discs with the marks listed in [Playable Media].  
If you use non-standardized discs, this unit may not play them back  
or the sound and video quality will be compromised.  
• If the recorded portion of the disc is too small (less than 2.17  
inches (55 mm) across), it may not play back properly.  
CD-RW  
CD-R  
digital audio  
Region Codes  
This unit has been designed to play back DVD with  
region 1. DVD must be labeled for ALL regions or  
for region 1 in order to play back on the unit.You  
cannot play back DVD that are labeled for other  
regions. Look for the symbols on your DVD. If these  
region symbols are not on your DVD, you cannot  
play back the DVD in this unit.  
The number inside the globe refers to region of the world.  
A DVD labeled for a specic region can only be played back  
on the unit with the same region code.  
Color Systems  
DVD is recorded in different color systems throughout the  
world.The most common color system is NTSC (which is used  
primarily in the United States and Canada).  
This unit uses NTSC, so DVD you play back must be recorded  
in the NTSC system.You cannot play back DVD recorded in  
PAL color systems.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
English  
To display the DVD menu, press DISC MENU and use  
///to select an item, then press ENTER (or  
PLAY B).  
These operations are accessible by remote control. Some  
may also be accessible by controls on the main unit.  
To display the top menu, press TITLE and use  
///to select an item, then press ENTER (or  
PLAY B).  
Playback  
Note  
• Menu operations may vary depending on the disc.  
Refer to the manual accompanying the disc for more details.  
Before you begin:  
Turn on the amplier and any other equipment which is  
connected to this unit. Make sure the external audio receiver (not  
included) are set to the correct channel.  
Resume Playback  
Press STOP C during playback. Resume message will appear  
on theTV screen.  
1
2
Press POWER to turn on the unit.  
Insert a disc with label facing forward.  
Press PLAY B. Playback will resume from the point at which  
playback was stopped.  
label  
Note  
#
CAUTION  
To cancel resume, press STOP C one more time in the stop mode.  
On some discs, STOP C will not work while the resume message  
appears. Please wait until the message disappears.  
Do not put coins or  
foreign objects into  
the disc loading slot.  
The resume information will be kept even when the unit goes  
into standby mode. However, ejecting the disc will cancel the  
resume feature. Playback will start at the beginning the next time  
you insert the disc.  
• In case the DVD was recorded on both sides, make  
sure the label of the side you want to play back is facing  
forward.  
3
4
5
The unit switches to the DVD mode when the unit was in  
TV mode and detects the type of disc.  
• Press PLAY B if the unit does not go to the DVD mode.  
Paused and Step-by-step Playback  
The unit starts playback.  
• If playback does not start automatically, press PLAY B  
again.  
Press PAUSE F during playback.  
• Playback will be paused and sound will be muted.  
Press STOP C to stop playback temporarily.  
• If playback remains stopped for 20 minutes, the unit will  
go into standby mode automatically when  
[AUTO POWER OFF] is set to [ON].  
DVD  
Each time you press PAUSE F in the pause mode, the disc  
goes forward one frame at a time.  
To continue playback, press PLAY B.  
E
6
Press A JECT to eject the disc.  
Note  
[  
operation is prohibited by the disc or this unit.  
• Some DVD may start playback from title 2 or 3 due to specic  
programs.  
Note  
] may appear at the top-right on theTV screen when the  
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures  
in the pause mode are blurred.  
p.27  
• During the playback of a 2-layered disc, pictures may stop for a  
moment.This happens while the 1st layer is being switched to the  
2nd layer.This is not a malfunction.  
• When you cannot remove the disc, you may try either following  
operations.  
Fast Forward/Fast Reverse  
- Press and hold A EJECT on the unit for more than 5 seconds.  
- Unplug the AC power cord and plug it in again, then press  
A EJECT.  
Press FWD D or REV E repeatedly during playback to  
select the desired forward or reverse speed.  
It will take about 10 seconds to eject the disc, while that the unit  
will not respond to any key commands.  
To continue playback, press PLAY B.  
Note  
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures  
in the fast playback mode are blurred.  
p.27  
Disc Menu  
• Fast forward/fast reverse speed varies with disc.Approximate  
speed is 1(2x), 2(8x), 3(20x), 4(50x) and 5(100x) on DVD and  
1(2x), 2(8x) and 3(30x) on audio CD.  
• For DVD, sound will be muted during this function.  
• For audio CD, sound will be intermittent during the search.  
DVD  
Some discs contain disc menus which describe the contents of  
the disc or allow you to customize disc playback, or title menu  
which lists the titles available on the DVD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
3
Playback will start automatically from the chapter, title or  
track you selected.  
Slow Forward/Slow Reverse  
DVD  
Note  
• Chapter, title or track search can only be performed during  
playback or when the unit has kept the resume information. It  
cannot be performed in the stop mode.  
• The total number of chapters/titles/tracks in your disc; with  
less than 10 chapters/titles/tracks, press the chapter/title/track  
number directly.To play a double-digit chapter/title/track, press  
the chapter/title/track number.  
Press FWD D or REV E repeatedly during the paused  
mode to select the desired forward or reverse speed.  
To continue playback, press PLAY B.  
Note  
• Set [STILL MODE] to [FIELD] in the [OTHERS] menu if pictures  
in the slow playback mode are blurred.  
• Slow forward/slow reverse speed varies with disc.Approximate  
speed is 1(1/16x), 2(1/8x) and 3(1/2x).  
p.27  
Track search is not available for programmed or random playback.  
Using SKIP H/G  
• The sound will be muted during this function.  
1
During playback, press SKIP H/G repeatedly until a  
desired chapter, title or track will be selected.  
Zoom  
current chapter/track  
(CH) (TR)  
current title  
(TT)  
DVD  
CH/TR 1 CH/TR 2 CH/TR 3 CH/TR 4  
or  
TT 1 TT 2 TT 3 TT 4  
[SKIP H]  
[SKIP G]  
[SKIP H]  
[SKIP G]  
The zoom function allows you to enlarge the video image and  
to pan through the enlarged image.  
2
Playback will start automatically from the chapter, title or  
track you selected.  
1
During playback, press MODE repeatedly until  
] appears.  
• The picture becomes twice as large.  
Note  
[
SKIP H/G are not available when playback is stopped.  
2
3
4
Press ENTER repeatedly to change the zoom factor, [2x]  
or [4x].  
Time Search  
You can select the desired time which the disc is played back  
from.  
Once a desired zoom factor is set, use ///to slide  
the zoomed picture across theTV screen.  
To exit zoom, repeat steps 1 to 2 above and press ENTER  
repeatedly until [OFF] appears.  
1
During playback, press MODE repeatedly until  
]/[ ] appears.  
[
Note  
• The gray box with an inner blue box that shows during zoomed  
playback is the position guide indicates the position of the zoomed  
image within the overall image.  
Position guide stays on theTV screen until you press ENTER.  
Press ENTER one more time to recall the position guide when  
disappears.  
• Zoom function does not work while the disc menu is displayed.  
• 4x zoom is not available on some discs.  
• Zoom function is also available during pause mode.  
2
3
Use /repeatedly until [  
] appears.  
Press the Number buttons to select your desired time  
lapse within 60 seconds.  
4
Note  
Playback will start automatically from the time you selected.  
• When there is no need to enter a number, [0] appears  
automatically. For example, [0: 0_: _ _] appears in the time search  
menu if the total time of the title or track is less than 10 minutes.  
• Press CLEAR to erase the incorrect input at step 3.  
• Time search can only be performed during playback or when the  
unit has kept the resume information.  
Search Functions  
It cannot be performed in the stop mode.  
Chapter/Title /Track Search  
You can select chapters, titles or tracks on the disc.  
Direct Search  
Press the Number buttons to select your desired chapter, title  
or track.  
1
2
During playback, press MODE repeatedly until  
]/[ ] appears.  
• If you want to perform the title search, use  
/repeatedly until [ ] appears.  
[
Note  
To select a single-digit chapter, title or track number, press the  
number directly.  
To select double digit chapter, title or track number:  
- If the disc contains more than 9 and less than 100 chapter, title  
or track, press +10 rst, then enter the double digit chapter, title  
or track number.  
Press the Number buttons to select your desired chapter,  
title or track within 60 seconds.  
To play back a single-digit chapter, title or track when  
there are more than 10 chapters, titles or tracks, press  
ENTER after entering the chapter, title or track number.  
(e.g., for track 26, press +10, 2 and 6)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
English  
2
Press PLAY B to start random playback.  
Repeat Playback  
Note  
Repeat function is available only during playback.  
To repeat the current track in the random mode, follow the steps  
1 and 2 in [Repeat Playback] and select [ TRACK]. p.31  
To repeat the entire random selections, follow the steps 1 and 2 in  
[Repeat Playback] and select [ ALL]. p.31  
1
2
During playback, press MODE repeatedly until [  
appears.  
]
Press /to change the repeat mode.  
DVD  
Programmed Playback  
OFF  
repeat off  
CD  
CHAPTER  
TITLE  
current chapter repeat  
current title repeat  
You may determine the order in which tracks will play back.  
CD  
1
2
In stop mode, press MODE repeatedly until [PROGRAM]  
menu appears.  
OFF  
repeat off  
TRACK  
ALL  
current track repeat  
entire disc repeat  
Use /to select a desired track, then press ENTER to  
store.  
• Additional tracks may be on other screens. Use /▼  
to go on to the next/previous pages.  
3
Press BACK to exit.  
• Repeat this step until you have selected all the tracks  
you wish to play back in the program.  
• Up to 99 tracks can be ordered.  
• If 8 or more tracks were in a program, use  
SKIP H/G to see all the tracks.  
Repeat A-B Playback  
You can repeat playback between A and B on a disc.  
3
Note  
Press PLAY B to start programmed playback.  
1
During playback, press MODE repeatedly until  
A
B
[
] appears.  
• Press CLEAR to erase the last track in the program if you make  
an error.  
To erase all programmed tracks at once, select [ALL CLEAR] and  
2
3
Press ENTER at your desired starting point (A).  
Press ENTER at your desired ending point (B).  
• Point B should be in the same title or track as point A.  
• Within a few seconds, the section A-B will begin to play  
back repeatedly.  
press ENTER at step 2.  
• While a program is being played back, STOP C works as follows:  
- Pressing STOP C once:The track will be in the resume standby  
mode. Next time you press PLAY B, the playback will resume  
from the point where it is stopped in the programmed playback.  
4
To cancel repeat A-B playback, press MODE repeatedly  
- Pressing STOP C twice: Resume mode will be canceled. Next  
time you press PLAY B, playback will restart from the rst track  
in the original order. However, your programmed playback can  
be restarted when you follow the above steps. (Your programs  
are still stored until either the disc is ejected or the unit goes into  
standby mode.)  
A
B
until [  
] appears.  
Press ENTER so [OFF] appears.  
Note  
• Repeat setting (except [ALL]) will be cleared when moving to  
another title or chapter, track.  
- On some discs, STOP C will not work while the resume message  
appears. Please wait until the message disappears.  
• During programmed playback, repeat setting will be effective for  
the tracks in the program.  
• Repeat playback or repeat A-B playback may not available with  
some discs.  
• Repeat A-B playback does not function during other repeat mode.  
To cancel point A, press CLEAR at step 2 in  
[Repeat A-B Playback].  
To repeat the current track in the program, follow the steps 1 and  
2 in [Repeat Playback] and select [TRACK].  
p.31  
To repeat the entire program, follow the steps 1 and 2 in [Repeat  
Playback] and select [ALL]. p.31  
• Ejecting the disc or the unit goes into standby mode will erase the  
program.  
You cannot use the Number buttons to select another track  
during programmed playback. Use SKIP H/G to select other  
tracks in the program.  
• Stopping playback will cancel repeat A-B playback.  
You cannot combine random playback with programmed playback.  
You cannot alter a programmed order during playback.  
You can start programmed playback only while in [PROGRAM]  
menu.  
Random Playback  
CD  
This function shufes the playing order of tracks instead of  
playback in the sequence.  
1
In stop mode, press MODE repeatedly until [RANDOM]  
menu appears.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
On-screen Display  
Special Settings  
Subtitle Language  
DVD  
You can check the information about the current disc by  
pressing INFO on the remote control.  
This unit allows you to select a subtitle language (if available)  
during DVD playback.  
remaining time of the current  
chapter  
DVD  
appears only when multi-  
angle is available on the DVD  
current playback status  
1
2
During playback, press MODE repeatedly until  
] appears.  
[
11/16 0:00:00 - 0:03:30  
Use /repeatedly until your desired language appears.  
elapsed time of the current  
chapter  
(
)
1.ENG / 6 SUBTITLE  
CH (Chapter):  
current chapter number /  
total chapters  
subtitles can be varied on the  
displayed number  
current subtitles language  
1/3 0:00:00 - 1:23:45  
3
Each time you press /, the subtitle language changes  
as follows.  
remaining time of the current title  
elapsed time of the current title  
OFF  
ENG  
SPA  
no subtitles  
TT (Title):  
current title number/total titles  
layer number, appears only when  
playing a 2-layered disc  
English audio  
Spanish audio  
T
L1  
L0 : Layer 0 is playing  
L1 : Layer 1 is playing  
4
Press BACK to exit.  
current repeat setting appears only  
when the repeat setting is active  
C : Chapter repeat  
Note  
To cancel the subtitle, select [OFF] at step 2.  
• If your language is not shown after pressing  
/several times, the disc may not have that language. However,  
some discs allow you to change subtitle languages setting in the  
disc menu. (Operation varies depending on the disc, so refer to  
the manual along with the disc.)  
T : Title repeat  
B : A-B repeat  
A
bit rate indication for the amount  
of audio and video data currently  
being read  
• When [NOT AVAILABLE] appears on theTV screen, it means no  
subtitle is recorded on the scene.  
• If you choose a language that has 3-letter-language code, the code  
will be displayed every time you change the subtitle language  
setting. If you choose any other languages, [---] will be displayed  
CD  
elapsed time of the current track  
remaining time of the current  
track  
instead.  
p.27  
• Ejecting the disc will cancel your subtitle setting.  
current playback status  
4/12 0:03:21 - 0:02:15  
T
Audio Language  
DVD  
TR (Track):  
current track number/total tracks  
ALL:  
This unit allows you to select an audio language (if multiple  
languages are available) during DVD playback.  
current track number/total tracks  
4/12 0:13:45 - 0:45:40  
T
current repeat setting appears  
only when the repeat setting is  
active  
T : Track repeat  
A : All tracks repeat  
1
During playback, press AUDIO repeatedly until the  
desired language appears.  
A
B : A-B repeat  
1.ENG Dolby D 3/2.1ch 48k/3  
remaining time of the entire disc  
elapsed time of the entire disc  
audio can be varied on the  
displayed number  
current audio language  
2
Each time you press AUDIO, the audio language changes  
as follows.  
Note  
• When you are playing back an audio CD in program or random  
ENG  
SPA  
FRE  
English audio  
Spanish audio  
French audio  
mode, [  
PROGRAM] (or [  
.
RANDOM]) will be displayed  
instead of  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
33  
English  
STEREO  
L-ch  
Stereo sound with left and right channels.  
Left channel sound only.  
Note  
• Some discs will only allow you to change the audio setting from  
the disc menu. Refer to the manual accompanying the discs for  
details.  
R-ch  
Right channel sound only.  
• If your language is not shown after pressing AUDIO several times,  
the disc may not have that language.  
Note  
• Virtual surround cannot be changed when the sound mode is set  
to either [L-ch] or [R-ch].  
However, some discs allow you to change multiple audio languages  
setting in the disc menu. (Operation varies depending on the disc,  
so refer to the manual along with the disc.)  
• When [NOT AVAILABLE] appears on theTV screen, it means  
audio language is not available.  
Virtuaal Surround  
You can enjoy virtual surround on your 2 channel stereo  
system.  
Camera Angles  
DVD  
1
2
During playback, press MODE repeatedly until [  
appears.  
]
Some DVD may contain scenes which have been shot  
simultaneously from various angles.You can change the camera  
angle if [ ] appears on the screen. If [ANGLE ICON] is set  
Press /to select the sound level.  
to [OFF] in [OTHERS] menu, [ ] will not appear.  
p.27.  
1
Natural effect.  
2
Emphasized effect.  
1
2
During playback, press MODE repeatedly until [  
appears.  
]
OFF  
No effects (original sound).  
3
Press BACK to exit.  
Use /repeatedly until your desired camera angle  
appears.  
Note  
• The setting will be kept even if the unit is turned off.  
• For audio CD, virtual surround will not be effective if the sound  
mode is set to something other than [STEREO].  
(
)
1 / 8 ANGLE  
angles can be varied on the  
displayed number  
[Stereo Sound Mode].  
Turn down the level or select [OFF] if the sound is distorted.  
p.33  
3
Press BACK to exit.  
Marker Setup  
Black Level Setttiinngg  
This feature allows you to assign a specic point on a disc to  
DVD  
be called back later.  
Adjust the black level to make the dark areas of theTV picture  
brighter.  
To set a marker  
1
During playback, press MODE repeatedly until  
]/[ ] appears.  
[
1
2
During playback, press MODE repeatedly until [  
appears.  
]
2
3
4
Use /repeatedly until marker search menu appears.  
Press /to adjust the black level.  
Use /to select an available marker within 60 seconds.  
ON  
Makes the dark areas brighter.  
When the playback reaches the point at which you want to  
set a marker, press ENTER.  
OFF  
Shows the original picture as recorded.  
• Marker is now set.  
3
Note  
Press BACK to exit.  
5
Press BACK to exit.  
To return to the marker later  
• The setting will be kept even if the unit goes into standby mode.  
1
2
Repeat steps 1-2 in [To set a marker]. Use /to select  
the desired marker.  
Stereo Sound Mode  
Press ENTER at the desired marker to restart playback  
from the specic point which you set.  
CD  
This unit allows you to select a sound mode during CD  
playback.  
Note  
• Marker search menu will disappear in about 60 seconds when  
there is no input.  
You can mark up to 10 points.  
To clear a marker, select the marker to be cleared, and then press  
CLEAR.  
• Ejecting the disc or turning off the power will erase all markers.  
1
2
During playback, press AUDIO repeatedly until the  
desired sound mode appears.  
Each time you press AUDIO, the sound mode changes as  
follows.  
• Selecting [  
] at step 3 in the section [To set a marker] will  
also erase all markers.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
34  
Note  
CONNECTING DEVICES  
• Use an HDMI cable with the HDMI logo (a certied HDMI cable).  
High Speed HDMI cable is recommended for the better  
compatibility.  
For HDMI connection (use HDMI 1 or 2 jack)  
• The unit accepts 480i, 480p, 720p, 1080i and 1080p 24/60 Hz of  
video signals, and 32kHz, 44.1kHz and 48kHz of audio signals.  
• This unit accepts only 2 channel audio signal (LPCM).  
You need to select "PCM" for the digital audio of the device you  
connected or check the HDMI audio setting.There may be no  
audio output if you select "Bitstream", etc.  
No supplied cables are used with these connections:  
• Please purchase the necessary cables at your local store.  
Before you connect:  
Be sure other device is connected properly before plugging in  
the AC power cord.  
• This unit accepts only signals in compliance with EIA861.  
For HDMI-DVI connection  
• The unit accepts 480i, 480p, 720p, 1080i and 1080p video signals.  
• HDMI-DVI connection requires separate audio connections as well  
and the audio signals are converted from digital to analog.  
• DVI does not display 480i image which is not in compliance with  
EIA/CEA-861/861B.  
External Device Connection  
HDMI Connection  
HDMI connection offers the highest picture quality.  
HDMI (High-Denition Multimedia Interface) transports high denition  
digital video and multi-channel digital audio through a single cable.  
ComponentVideo Connection  
ComponentVideo connection offers better picture quality for  
video devices connected to the unit.  
If you connect to the unit’s ComponentVideo Input jacks,  
connect audio cables to the Audio L/R Input jacks right beside  
the ComponentVideo connector.  
BD/DVD recorder  
with the HHDMI output jack  
TITLE  
5
CHAPTER 15  
REPEAT A-B  
HDMI OUT  
component video cables  
(red  
/
blue green)  
/
audio cables  
or  
HDMI cable  
(green) (blue) (red)  
AUDIO OUT  
COMPONENT VIDEO OUT  
Pb/Cb Pr/Cr  
L
R
Y
HDMI-DVI Connection  
TITLE  
5
CHAPTER 15  
REPEAT A-B  
Use an HDMI-DVI conversion cable to connect the unit to  
external video devices equipped with DVI output jack.  
(Use HDMI 1 Input jack only and Audio L/R below HDMI 1  
Input jack on rear of TV.)  
BD/DVD recorder  
with tthe component video output jacks  
cable receiver or satellite box  
with the DDVI output jack  
Note  
STEREO  
PCM  
• The unit accepts 480i/480p/720p and 1080i of video signals for  
this connection.  
AUDIO OUT  
DVI OUT  
L
R
S-Video Connection  
S-Video connection offers good picture quality for video  
devices connected to the unit.  
To HDMI 1 Input  
jack only  
If you connect to the unit’s S-Video Input jack, connect audio  
cables to the Audio L/R jacks below theVideo connector.  
HDMI-DVI  
conversion cable  
audio cables  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
English  
BD/DVD recorder, camcorder and  
VCR withh the S-VVideo output jack  
DIGITAL AUDIO  
COAXIAL IN  
TITLE  
5
CHAPTER 15  
REPEAT A-B  
Dolby Digital  
decoder  
S-VIDEO  
OUT  
AUDIO OUT  
L
R
S-Videeo cable  
audio cables  
digital audio coaxial cable  
PC Connection  
CompositeVideo Connection  
This unit is equipped with a PC input jack. If you connect this  
unit to your PC, you can use this unit as a PC monitor.  
Use anVGA cable for this connection and it requires stereo  
mini plug audio cable as well.  
CompositeVideo connection offers standard picture quality  
for video devices connected to the unit. If you connect to the  
unit’s CompositeVideo Input jack, connect audio cables to  
the Audio L/R Input jacks right beside the CompositeVideo  
connector.  
VGA cable  
When the audio jack of the video device is monaural, connect  
an audio cable to the Audio L Input jack.  
VGA cable should be  
with ferrite core.  
camcorder  
video game  
stereo mini plug cable  
STAND-BY  
STEREO  
VCR  
VIDEO  
OUT  
AUDIO OUT  
L
R
personal computer  
The following video signals can be displayed:  
Format  
VGA  
Resolution  
Refresh rate  
video cable  
640  
x
x
x
x
x
480  
SVGA  
XGA  
800  
1,024  
1,280  
1,360  
600  
768  
768  
768  
60Hz  
audio cables  
WXGA  
Note  
• If you connect to the S-Video Input jack and the CompositeVideo  
Input jack at the same time, the S-Video connection will have  
priority.  
Other formats or non-standard signals will not be displayed  
correctly.  
Note  
• Please purchase theVGA cable that has a ferrite core.  
• The following operations may reduce noise.  
- Attach a ferrite core to the AC power cord of your PC.  
- Unplug the AC power cord and use the built-in battery of your  
PC.  
Digital Audio Output Connection  
(for digital broadcasting and DVD functions only)  
If you connect this unit to an external digital audio device, you  
can enjoy multi-channel audio like 5.1ch digital broadcasting  
sound.  
Use a digital audio coaxial cable to connect the unit to  
external digital audio devices.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
36  
USEFULTIPS  
Troubleshooting Guide  
If the unit does not perform properly when operated as instructed in this manual,  
check the following chart and all connections once before calling for service.  
Symptom  
Remedy  
Make sure the AC power cord is plugged in.  
Make sure that the AC outlet supplies the proper voltage, plug another electrical appliance into  
the AC outlet to ensure that AC outlet operates normally.  
No power  
If a power failure occurs, unplug the AC power cord for 1 minute to allow the unit to reset itself.  
Press only one button at a time. Do NOT press more than one button at the same time.  
Ensure that no buttons on the remote are depressed and move freely.  
Control button's do not work.  
Check whether the connection of the antenna, cable receiver or satellite box is connected  
correctly.  
Check whether all the cables to the unit are connected to the correct output jack of your device  
like BD/DVD recorder.  
Power is ON but no screen image.  
Make sure that the selected input mode is connected to the working input jack.  
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.  
Tap any key on the keyboard to wake up your computer.  
Check if the power is on.  
Check if the correct input mode is selected.  
Check whether all the cables to the unit are connected to the correct output jack of your device  
like BD/DVD recorder.  
View otherTV channels.The problem might be limited to the broadcasting station or weak signal  
strength.  
Unplug the AC power cord and wait for about 1 minute, then plug the AC power cord and turn  
on the unit again.  
Check whether the connection of the antenna, cable receiver or satellite box is connected  
correctly.  
No picture or sound  
Make sure that the selected input mode is connected to the working input jack.  
Check if your computer is NOT in sleep mode when the input mode of this unit is in PC mode.  
Tap any key on the keyboard to wake up your computer.  
Make sure that the sound is not muted. Press  
volume level will appear on theTV screen.  
MUTE so that the volume bar and current  
Make sure that the volume is NOT set to [ ] or [Mute]. If so, use VOL. /to adjust the desired  
0
T
V
volume.  
View otherTV channels.The problem might be limited to the broadcasting station.  
Adjust [Color] in the main menu.  
No color  
Adjusted [Picture] or [Sound]  
settings are not effective every time  
the unit is turned on.  
You must set [Home] in [Location]. p.24  
Otherwise, the settings you adjusted will not be memorized after the unit goes into standby mode.  
Electrical interference from nearby appliances may affect picture quality.  
Adjust [Contrast] and [Brightness] in the main menu.  
View otherTV channels.The problem might be limited to the broadcasting station or weak signal  
strength.  
For the best picture quality, watch "High Definition" wide screen programs.  
If the HD content is not available, watch "Standard Definition" programs instead.  
Sound okay, picture poor  
Picture okay, sound poor  
View otherTV channels.The problem might be limited to the broadcasting station or weak signal  
strength.  
Check if the audio cable is connected in correctly.  
You may be getting interference from electrical appliances, automobiles, motorcycles or uorescent  
lights.  
Try moving the unit to another location to see if this is the cause of the problem.  
You see a distorted picture or hear  
an unusual sound.  
Electrical interference from nearby appliances may affect picture quality.  
View otherTV channels.The problem might be limited to the broadcasting station.  
Ghosts, lines or streaks in picture  
You see "noise" or "trash" on the  
screen.  
When the capabilities of the unit exceed the capabilities of the digital broadcasting, the signal will  
be increased to match the capabilities of the display of the unit.This may cause noise or trash.  
Different color marks on theTV  
screen  
View otherTV channels.The problem might be limited to the broadcasting station, missing data or  
pixelation.  
This unit will memorize the volume level froam the last time you adjusted it.  
If the volume of the sound from another device is higher or lower, then the loudness will change.  
You switch to a different input and  
the volume changes.  
You switch to a different input and  
the screen size changes.  
This unit will memorize the viewing mode from the last time you used the particular input modes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
English  
Symptom  
Remedy  
If you are using the unit as a PC monitor, make sure that [Horizontal Position] and  
The display image does not cover  
the entire screen.  
[Vertical Position] in [PC Settings] are set correctly.  
If you are watchingTV or using the CompositeVideo, ComponentVideo or HDMI with 480i Input,  
press SCREEN MODE  
repeatedly to switch various screen modes.  
Captions are displayed as a white  
box. No caption is displayed in  
the Closed Caption-supported  
program.  
Interference from buildings or weather conditions may cause captioning to be incomplete.  
Broadcasting station may shorten the program to insert advertisement.  
The closed caption decoder cannot read the information of the shortened program.  
T
V
No caption is displayed when  
playing back a disc or a cassette  
tape containing captions.  
The disc or cassette tape may be illegally copied, or the caption signal might not have been read  
during copying.  
Black box is displayed on theTV  
screen.  
The text mode is selected for caption. Select [CC-1], [CC-2], [CC-3], [CC-4] or [Off].  
Make sure the disc is compatible with the unit.  
Completely distorted picture or  
black/white picture with DVD.  
Picture freezes momentarily during  
playback.  
Check the disc for nger prints/scratches and clean with a soft cloth wiping from center to edge.  
Clean the disc.  
Ensure the disc is correctly inserted.  
Check if the disc is defective by trying another disc.  
Cancel the parental lock or change the control level.  
Insert a correct disc that plays on this unit.  
Handle a disc with special care so that it does not have ngerprints, scratches, or dusts on its  
surface.  
Disc cannot be played.  
D
V
D
Buttons do not work or the unit  
stops responding.  
To completely reset the unit, unplug the AC power cord from the power outlet for 5-10 seconds.  
Operations may not be permitted by the disc. Refer to the instructions of the disc.  
The unit does not respond to  
some operating commands during  
playback.  
The angle cannot be switched for DVD which do not contain multiple angles. In some cases  
multiple angles are only recorded for specic scenes.  
Angle does not switch.  
Playback does not start when the  
title is selected.  
Check the [PARENTAL] setting.  
The password for rating level has  
been forgotten.  
Enter the default password (4737), then your forgotten password will be cleared.  
Note  
• The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a xed point of blue,  
green or red.  
This is not to be considered a defect in the LCD screen.  
• Some functions are not available in specic modes, but this is not a malfunction. Read the description in this manual for more details on  
correct operations.  
• Some functions are prohibited on some discs.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
38  
FAQ  
Question  
Answer  
Check the antenna or cable connection to the main unit.  
Check the batteries of the remote control.  
Check if there is an obstacle between the infrared sensor window and the remote control.  
Test the signal output. If okay, then possible infrared sensor trouble. [IR Signal Check]  
p.39  
Aim the remote control directly at the infrared sensor window on the front of the unit.  
Reduce the distance to the unit.  
My remote control does not work.  
What should I do?  
Re-insert the batteries with their polarities (+/signs) as indicated.  
When there is an infrared-equipped device such as PC near this unit, it may interrupt the remote  
control signal of this unit.  
Move the infrared-equipped device away from this unit, change the angle of the infrared sensor or  
turn off the infrared communication function.  
How come the Initial setup  
appears every time I turn on this  
unit?  
Connect the RF coaxial cable to the unit directly and run the initial setup.  
Make sure to complete the channel scan before the unit goes into standby mode.  
Make sure [Autoprogram] has been completed.  
p.19  
Autoprogram must be completed when you set up the unit for the rst time or move it to a location  
where previously unavailable channels are broadcast.  
The selected channel may not be broadcasting.  
When [Autoprogram] is interrupted and not completed, some channels will not be received. Make  
Why can I not watch some RF  
signalTV programs.  
sure to complete the Autoprogram.  
p.19  
The selected channel cannot be viewed by the [Child Lock] setting.  
p.21  
The unit requires some kind of antenna input.An indoor antenna (VHF/UHF), an external antenna  
(VHF/UHF) or an RF coaxial cable from your wall cable/satellite box needs to be plugged into the  
unit.  
Check if the correct input mode is selected by pressing INPUT SELECT or using CH /.  
[Switching Each Input Mode]  
p.14  
How come there is no image from  
the connected external devices?  
Check the antenna or cable connection to the unit.  
When using the ComponentVideo Connection check that the Green (Y), Blue (Pb/Cb) and Red (Pr/  
Cr) connectors are connected to their corresponding colored jacks on the unit.  
Many digital channels have alternate channel numbers.The unit changes the numbers automatically to  
the ones signifying the broadcasting station channel number.These basic numbers used for previous  
analog broadcasts. (e.g., input ch#30 auto changes to ch#6.1)  
When I enter a channel number, it  
changes automatically.  
Clean the disc.  
Ensure the disc is correctly inserted.  
Check if the disc is defective by trying another disc.  
Cancel the parental lock or change the control level.  
Insert a correct disc that plays back on this unit.  
Handle a disc with special care so that it does not have ngerprints, scratches or dusts on its surface.  
My disc cannot be played back.  
Is there any way I can play my disc?  
Captions that are delayed a few seconds behind the actual dialog are common for live broadcasts.  
Most captioning production companies can display a dialog to maximum of 220 words per minute. If  
a dialog exceeds that rate, selective editing is used to insure that the captions remain up-to date with  
the currentTV screen dialog.  
Why are captions not displayed  
entirely? Or, captions are delayed  
behind the dialog.  
There is no clock function on this unit.  
How can I set the clock ?  
I cannot change the [Child Lock]  
setting because my PIN code no  
longer works.  
If a Power failure occurs for longer than 10 seconds the child lock setting is retained, but the PIN code  
is set to the default code “0000”. [Child Lock]  
p.21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
English  
INFORMATION  
Maintenance  
Glossary  
ATSC  
Cabinet Cleaning  
Wipe the front panel and other exterior surfaces of the  
unit with a soft cloth.  
Never use a solvent or alcohol. Do not spray insecticide  
liquid near the unit. Such chemicals may cause damage and  
discoloration to the exposed surfaces.  
Acronym that stands for AdvancedTelevision Systems Committee and  
the name of the digital broadcasting standards.  
Aspect Ratio  
The width of aTV screen relative to its height. ConventionalTVs are 4:3  
(in other words, theTV screen is almost square); widescreen models  
are 16:9 (theTV screen is almost twice as wide as its height).  
(Consumer Electronics Control)  
CEC  
Panel Cleaning  
Wipe the panel of the unit with a soft cloth. Before cleaning  
the panel, disconnect the AC power cord.  
This allows you to operate the linked functions between our brand  
devices with CEC feature and this unit.We do not guarantee 100%  
interoperability with other brands of CEC compliant devices.  
ComponentVideo  
Disc Handling  
Handle the discs so that ngerprints and dust do not adhere  
to the surfaces of the discs.  
This is a video signal format that conveys each of 3 principal colors  
of light (red, blue and green) through different signal lines.This allows  
the viewers to experience picture colors as original as it is.There are  
several signal formats, includingY/Pb/Pr andY/Cb/Cr.  
Dolby Digital  
The system developed by Dolby Laboratories to compress digital  
sound. It offers stereo sound (2ch) or multi-channel audio.  
(High-Definition Multimedia Interface)  
HDMI  
Always store the disc in its protective case when it is not  
used.  
To clean-off, use a soft cloth.  
Do not use a hard cloth since this will mar the disc.  
Wipe the disc in a straight line form center to edge.  
Never wipe with a circular motion.  
Interface that supports all uncompressed, digital audio/video formats  
including set-top box, BD/DVD recorder or digital television, over a  
single cable.  
(High DefinitionTV)  
HDTV  
Ultimate digital format that produces high resolution and high picture  
quality.  
Do not use detergent or abrasive cleaning agents.  
NTSC  
Acronym that stands for NationalTelevision Systems Committee and  
the name of analog broadcasting standards.  
Servicing  
Should your unit become inoperative, do not try to correct  
the problem yourself.There are no user serviceable parts  
inside. Call our toll free customer support line found on the  
cover of this manual to locate an authorized service center.  
Off the air NTSC signals are no longer being sent by major  
broadcasting stations in the USA.  
PIN code  
A stored 4-digit number that allows access to parental control features.  
Region Code  
If the Laser Optical Pickup Unit is Dirty  
Regions associate discs and players with particular areas of the world.  
This unit will only play back discs that have compatible region codes.  
You can find the region code of your unit by looking on the rear panel.  
Some discs are compatible with more than one region (or all regions).  
If the unit still does not perform properly when it is operated,  
while referring to the relevant sections and to [Troubleshooting  
Guide] in this manual, the laser optical pickup unit may be  
dirty. Consult your dealer or an Authorized Service Center for  
inspection and cleaning of the laser optical pickup unit.  
(Secondary Audio Program)  
SAP  
Second-audio channel delivered separately from main-audio channel.  
This audio channel is used as an alternate in bilingual broadcasting.  
IR Signal Check  
(Standard DefinitionTV)  
SDTV  
If the remote control is not working properly, you can use a  
digital camera (including a cellular phone with built-in camera)  
to see if it is sending out an infrared signal.  
Standard digital format that is similar to the NTSC picture quality.  
S-Video  
Offers higher quality images by delivering each signal, color (c) and  
luminance (y) independently of each other through a single cable.  
With a digital camera  
(including built-in cell phone cameras):  
Point the Digital Camera towards the remote  
control infrared diode at the front of the  
remote control. Press any button on the  
remote control and look through the camera  
display. If the infrared pulsating light appears  
through the camera, the remote control is  
sending out an IR signal.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
General Specications  
Other Specications  
Terminals  
Antenna Input VHF/UHF/CATV  
Audio Input  
CompositeVideo Input  
RCA jack x 1  
TV  
75Ω unbalanced (F-type)  
500mV rms  
TV format  
Closed Caption system  
ATSC/NTSC-MTV standard  
RCA jack (L/R) x 6  
§15.122/FCC (digital CC)  
§15.119/FCC (analog CC)  
1V p-p (75Ω)  
S-Video Input  
Channel coverage (ATSC/NTSC)  
Terrestrial DTV (ATSC)  
VHF 2~13  
Mini DIN 4 pin jack x 1  
Y
C
1V p-p (75Ω)  
286mV p-p (75Ω)  
ComponentVideo Input  
RCA jack x 3  
Y
1V p-p (75Ω)  
UHF 14~51 each channel has e.g.)  
2.1~2.9, 3.1~3.9, etc.  
Pb/Cb 700mV p-p (75Ω)  
Terrestrial Analog (NTSC)  
VHF 2~13  
Pr/Cr 700mV p-p (75Ω)  
HDMI Input  
PC Input  
HDMI 19pin x 2  
D-Sub 15pin x 1(RGB)  
UHF 14~69  
Mini jack ø3.5mm x 1(audio)  
CATV  
2~13,A~W,  
W+1~W+94 (analog W+1~W+84),  
A-5~A-1, 5A  
Digital Audio Output (coaxial)  
RCA jack x 1  
1/8 inches x 1(3.5mm)  
500mV p-p (75Ω)  
Headphone  
Tuning system  
Channel access  
Channel frequency synthesized tuning  
system  
Direct access keyboard,  
Programmable scan, and up/down  
Remote control  
Digital encoded infrared light system  
Operating temperature  
DVD  
41°F (5°C) to 104°F (40°C)  
Discs (playback compatibility)  
DVD-video, DVD-RW/-R,  
audio CD, CD-RW/-R  
Power requirements  
120V~ AC +/10%, 60Hz +/0.5%  
Frequency response  
DVD (linear sound) 20 Hz to 20 kHz (sample rate: 48 kHz)  
Power consumption (maximum)  
57W  
19inches  
(18.5 inches measured diagonally)  
<with base>  
20 Hz to 44 kHz (sample rate: 96 kHz)  
20 Hz to 20 kHz  
Signal-to-noise ratio (S/N ratio)  
LCD  
Dimensions  
CD  
<without base>  
Width 18.8 inches (477.5mm) 18.8 inches (477.5mm)  
Height 13.1 inches (330.4mm) 14.5 inches (365.8mm)  
Depth 5.4 inches (134.7mm) 8.3 inches (210.0mm)  
CD  
90 dB (JEITA)  
Total distortion factor  
9.15 lbs.  
(4.15kg)  
9.71 lbs.  
(4.40kg)  
DVD  
CD  
1 KHz 0.007% (JEITA)  
1 KHz 0.007% (JEITA)  
Weight  
Electrical Specication  
Audio Output  
1W, 16Ω x 2  
Designs and specications are subject to change without  
notice and without our legal obligation.  
If there is a discrepancy between languages, the default  
language will be English.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
English  
LIMITED WARRANTY  
( )  
(
)
NINETY 90 DAY LABOR / ONE 1 YEAR PARTS  
WARRANTY COVERAGE:  
This warranty obligation is limited to the terms as set forth  
below.  
mission, or (d) if any serial number has been removed or defaced,  
or (e) product, accessories or consumables sold “AS IS” without  
warranty of any kind by including refurbished product sold “AS  
IS” by some retailers.  
WHO IS COVERED:  
This product warranty is issued to the original purchaser or the  
person receiving the product as a gift against defects in materials  
and workmanship as based on the date of original purchase  
(“Warranty Period”) from an Authorized Dealer. The original  
sales receipt showing the product name and the purchase date  
from an authorized retailer is considered such proof.  
This Limited Warranty does not cover:  
Shipping charges to return defective product.  
Labor charges for installation or setup of the product, adjust-  
ment of customer controls on the product, and installation or  
repair of antenna/signal source systems outside of the product.  
Product repair and/or part replacement because of improper  
installation or maintenance, connections to improper voltage  
supply, power line surge, lightning damage, retained images or  
WHAT IS COVERED:  
This warranty covers new products if a defect in material or  
workmanship occurs and a valid claim is received within the  
Warranty Period. At its option, the company will either (1)  
repair the product at no charge, using new or refurbished  
replacement parts, or (2) exchange the product with a product  
that is new or which has been manufactured from new, or ser-  
viceable used parts and is at least functionally equivalent or most  
comparable to the original product in current inventory, or (3)  
refund the original purchase price of the product.  
tent for extended periods, product cosmetic appearance items  
due to normal wear and tear, unauthorized repair or other  
cause not within the control of the company.  
Damage or claims for products not being available for use, or  
for lost data or lost software.  
Damage from mishandled shipments or transit accidents when  
returning product.  
Replacement products or parts provided under this warranty are  
covered against defects in materials and workmanship from the  
date of the replacement or repair for ninety (90) days or for the  
remaining portion of the original product’s warranty, whichever  
provides longer coverage for you. When a product or part is  
exchanged, any replacement item becomes your property and the  
replaced item becomes company property. When a refund is  
given, your product becomes company property.  
it to operate in any country other than the country for which  
it was designed, manufactured, approved and/or authorized, or  
A product used for commercial or institutional purposes  
(including but not limited to rental purposes).  
can be provided.  
Failure to operate per Owner’s Manual.  
Note: Any product sold and identified as refurbished or  
renewed carries a ninety (90) day limited warranty.  
TO OBTAIN ASSISTANCE…  
Contact the Customer Care Center at:  
1-866-321-3927  
Replacement product can only be sent if all warranty  
requirements are met. Failure to follow all requirements  
can result in delay.  
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS  
WARRANTY IS THE EXCLUSIVE REMEDY FOR THE CON-  
SUMER, WITH THE ISSUING COMPANY NOT LIABLE FOR  
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR  
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON  
THIS PRODUCT. EXCEPT TO THE EXTENT PROHIBITED BY  
APPLICABLE LAW, ANY IMPLIED WARRANTY OF MER-  
CHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE  
ON THIS PRODUCT IS LIMITED IN DURATION TO THE  
DURATION OF THIS WARRANTY.  
WHAT IS NOT COVERED - EXCLUSIONS AND LIMI-  
TATIONS:  
This Limited Warranty applies only to new company manufac-  
to any hardware product or any software, even if packaged or  
sold with the product, as manufacturers, suppliers, or publishers  
may provide a separate warranty for their own products pack-  
aged with the bundled product.  
The company is not liable for any damage to or loss of any pro-  
grams, data, or other information stored on any media contained  
within the product, or other additional product or part not cov-  
ered by this warranty. Recovery or reinstallation of programs,  
data or other information is not covered under this Limited  
Warranty.  
Some states do not allow the exclusions or limitation of inciden-  
tal or consequential damages, or allow limitations on how long an  
implied warranty lasts, so the above limitations or exclusions may  
not apply to you.  
This warranty does not apply (a) to damage caused by accident,  
abuse, misuse, neglect, misapplication, or non-supplied product,  
(b) to damage caused by service performed by anyone other than  
company approved Authorized Service Location, (c) to a product  
FUNAI CORPORATION, Inc. 19900 Van Ness Avenue, Torrance, CA 90501  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Singer Sewing Machine CSP1 User Manual
Sonic Alert Thermometer SBT425SS User Manual
Sony Cell Phone PEG SJ20 User Manual
Sony Home Theater System FST ZX8 User Manual
Sony Indoor Furnishings SU 36F2 User Manual
Sony Personal Computer VPCL14 Series User Manual
Sony Snowshoes SNC RZ30 User Manual
Star Micronics Printer LC 15 User Manual
Sunrise Medical Mobility Aid C001022 User Manual
Swann DVR DVR8 8600 User Manual