Sylvania DVD Player SRD4900 User Manual

Owner’s Manual

Please read before using this equipment.

DVD/CD Player with Video Cassette Recorder

INSTRUCCIONES EN ESPAÑOL INCLUIDAS.

SRD4900

Table of Contents

Precautions

Laser Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

■ Important Safeguards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Installation Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Avoid the Hazards of Electrical Shock and Fire. . . . . . . . . . . . . . 4

Moisture Condensation Warning. . . . . . . . . . . . . . . . . . . . . . . . . 4

About Copyright . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Symbol Used in This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Setup

■ About the Video Cassettes and Discs . . . . . . . . . . . . . . . . . . . 5

Playable Video Cassettes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Unplayable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

■ Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

RF Output Channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Cable Box or Satellite Box Connection . . . . . . . . . . . . . . . . . . . . 6

Connection to an Audio System (DVD Audio Only) . . . . . . . . . . . 6

Connection to a TV (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Front & Rear Terminals. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

■ About the Remote Control and Front Panel. . . . . . . . . . . . . . . 8

■ VCR/DVD Selection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

■ First Time Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Turn on the unit for the first time . . . . . . . . . . . . . . . . . . . . . . . . 10

Clock Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Supplied Accessory

• Remote control

(NB111UD or NB161UD)

with two AA batteries

• RF cable

(WPZ0901TM002)

VCR Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ Recording & OTR (One Touch Recording) . . . . . . . . . . . . . . . 11

■ Other Operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

■ On-Screen Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

■ Recording Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Timer Recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

DVD Operation During Timer Recording . . . . . . . . . . . . . . . . . . 13

Copying a Video Tape. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

■ MTS System (Multi-Channel Television Sound) . . . . . . . . . . . 13

■ Special Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Time Search / Index Search / Auto Repeat . . . . . . . . . . . . . . . . 14

• Audio/Video cables

(WPZ0102TM015 or

WPZ0102LTE01)

• Owner’s Manual

(0VMN04014)

Owner's Manual

DVD Functions

■ Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

■ MP3 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ The On-Screen Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

■ Search Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Track Search / Title/Chapter Search / Time Search . . . . . . . . . 17

■ Marker Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

■ Repeat / Random / Programmed Playback . . . . . . . . . . . . . . 18

Repeat Playback / Repeat A-B Playback /

Random Playback / Programmed Playback. . . . . . . . . . . . . . . . 18

■ Special Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Subtitle Language / Audio Language / Camera Angle /

Black Level Setting / Stereo Sound mode / Virtual Surround . . . . . . . 19

■ DVD Set Up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

LANGUAGE Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

TV Display Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

AUDIO Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

PARENTAL Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting 22

If you need additional operating assistance after

reading this owner’s manual, please call

Information

■ Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

■ Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Language List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

■ Limited Warranty. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

TOLL FREE : 1-800-968-3429

Español . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Quick Use Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Basic TV Connection

(Back of

Cable

Signal

Antenna

Cable

Signal

Antenna

DVD/VCR)

(Back of TV)

outlets

(Back of TV)

ANT-IN

Plug in

ANT-OUT

Disconnect

From

Connect

DVD/VCR

Connect

From

RF Cable (supplied)

Download from Www.Somanuals.com. All Manuals Search And Download.

Please refer to "Connections" on page 5.

Important Safeguards

1. Read Instructions - All the safety and operating instruc-

tions should be read before the appliance is operated.

proper grounding of the mast and supporting structure,

grounding of the lead-in wire to an antenna discharge unit,

size of grounding conductors, location of antenna-dis-

charge unit, connection to grounding electrodes, and

requirements for the grounding electrode. (Fig. A)

2. Retain Instructions- The safety and operating instructions

should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in the

operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions

should be followed.

FIGURE A

ANTENNA

EXAMPLE OF ANTENNA GROUNDING

AS PER NATIONAL ELECTRICAL CODE

LEAD

WIRE

5. Cleaning - Unplug this video product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

cleaners. Use

damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupted

service and, that for some specific reason, such as the

possibility of the loss of an authorization code for a CATV

converter, is not intended to be unplugged by the user for

cleaning or any other purpose, may exclude the reference

to unplugging the appliance in the cleaning description

otherwise required in item 5.

6. Attachments - Do not use attachments not recommended

by the video product manufacturer as they may cause haz-

ards.

7. Water and Moisture- Do not use this video product near

water, for example, near a bath tub, wash bowl, kitchen

sink, or laundry tub, in a wet basement, or near a swim-

ming pool, and the like.

8. Accessories - Do not place this video product on an unsta-

ble cart, stand, tripod, bracket, or table. The video product

may fall, causing serious injury to a child or adult, and seri-

ous damage to the appliance. Use only with a cart, stand,

tripod, bracket, or table recommended by the manufactur-

er, or sold with the video product. Any mounting of the

appliance should follow the manufactur-

er's instructions and should use a

mounting accessory recommended by

the manufacturer. An appliance and cart

combination should be moved with care.

Quick stops, excessive force, and

uneven surfaces may cause the appli-

ance and cart combination to overturn.

9. Ventilation - Slots and openings in the cabinet are provid-

ed for ventilation and to ensure reliable operation of the

video product and to protect it from overheating, and these

openings must not be blocked or covered. The openings

should never be blocked by placing the video product on a

bed, sofa, rug, or other similar surface. This video product

should not be placed in a built-in installation such as a

bookcase or rack unless proper ventilation is provided or

the manufacturer's instructions have been adhered to.

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMP

NEC – NATIONAL ELECTRICAL CODE

S2898A

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

14. Lightning - For added protection for this video product dur-

ing a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall out-

let and disconnect the antenna or cable system. This will

prevent damage to the video product due to lightning and

power-line surges.

15. Power Lines - An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light or power circuits, or where it can fall into such

power lines or circuits. When installing an outside antenna

system, extreme care should be taken to keep from touch-

ing such power lines or circuits as contact with them might

be fatal.

16. Overloading - Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry - Never push objects of any kind

into this video product through any openings as they may

touch dangerous voltage points or short-out parts that

could result in a fire or electric shock. Never spill liquid of

any kind on the video product.

18. Servicing - Do not attempt to service this video product

yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing

to qualified service personnel.

19. Damage Requiring Service - Unplug this video product

from the wall outlet and refer servicing to qualified service

personnel under the following conditions:

a. When the power-supply cord or plug is damaged.

b. If liquid has been spilled, or objects have fallen into the

video product.

10. Power Sources - This video product should be operated

only from the type of power source indicated on the mark-

ing label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local power

company. For products intended to operate from battery

power, or other sources, refer to the operating instructions.

11. Grounding or Polarization - This video product is equipped

with a polarized alternating-current line plug (a plug having

one blade wider than the other). This plug will fit into the

power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try revers-

ing the plug. If the plug should still fail to fit, contact your

electrician to replace your obsolete outlet. Do not defeat

the safety purpose of the polarized plug.

12. Power Cord Protection - Power supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying par-

ticular attention to cords at plugs, convenience recepta-

cles, and the point where they exit from the appliance.

13. Outdoor Antenna Grounding - If an outside antenna or

cable system is connected to the video product, be sure

the antenna or cable system is grounded so as to provide

some protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with regard to

c. If the video product has been exposed to rain or water.

d. If the video product does not operate normally by following

the operating instructions. Adjust only those controls that

are covered by the operating instructions as an improper

adjustment of other controls may result in damage and will

often require extensive work by a qualified technician to

restore the video product to its normal operation.

e. If the video product has been dropped or damaged in any

way.

f. When the video product exhibits a distinct change in per-

formance this indicates a need for service.

20. Replacement Parts - When replacement parts are

required, be sure the service technician has used replace-

ment parts specified by the manufacturer or have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock or other haz-

ards.

21. Safety Check - Upon completion of any service or repairs

to this video product, ask the service technician to perform

safety checks to determine that the video product is in

proper operating condition.

22. Heat - This video product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Installation Location

Maintenance

For safety and optimum performance of this unit:

• Install the unit in a horizontal and stable position. Do

not place anything directly on top of the unit. Do not

place the unit directly on top of the TV.

• Shield it from direct sunlight and keep it away from

sources of intense heat. Avoid dusty or humid

places. Avoid places with insufficient ventilation for

proper heat dissipation. Do not block the ventilation

holes on the sides of the unit. Avoid locations sub-

ject to strong vibration or strong magnetic fields.

SERVICING

¡Please refer to relevant topics on the Troubleshooting

Guide on page 23 before return the product.

¡When this unit become inoperative, do not try to cor-

rect the problem by yourself. There are no user-ser-

viceable parts inside.Turn off, unplug the power plug,

and please call our help line mentioned on the front

page to locate an Authorized Service Center.

CLEANING THE CABINET

¡Use a soft cloth slightly moistened with a mild deter-

gent solution. Do not use a solution containing alco-

hol, spirits, ammonia or abrasive.

Avoid the Hazards of Electrical Shock and Fire

• Do not handle the power cord with wet hands.

• Do not pull on the power cord when disconnecting it

from AC wall outlet. Grasp it by the plug.

• If, by accident, water is spilled on this unit, unplug

the power cord immediately and take the unit to our

Authorized Service Center for servicing.

CLEANING DISCS

¡When a disc becomes dirty, clean it with a cleaning

cloth. Wipe the disc from the center out. Do not wipe

in a circular motion.

Do not use solvents such as benzine, thinner, commercial-

ly available cleaners, detergent, abrasive cleaning agents

or antistatic spray intended for analogue records.

• Do not put your fingers or objects into the DVD/VCR

cassette holder.

CLEANING THE DISC LENS

¡If this unit still does not perform properly although

you refer to the relevant sections and to “TROU-

BLESHOOTING GUIDE” in this Owner’s Manual, the

laser optical pickup unit may be dirty. Consult your

dealer or an Authorized Service Center for inspection

and cleaning of the laser optical pickup unit.

Moisture Condensation Warning

Moisture condensation may occur inside the unit

when it is moved from a cold place to a warm place,

or after heating a cold room or under conditions of

high humidity. Do not use this unit at least for 2 hours

until its inside gets dry.

DISC HANDLING

¡Handle the discs so that fingerprints and dust do not

adhere to the surfaces of the discs.

¡Always store the disc in its protective case when it is

not used.

About Copyright

Unauthorized copying, broadcasting, public perfor-

mance and lending of discs are prohibited.

This product incorporates copyright protection tech-

nology that is protected by method claims of certain

U.S. patents and other intellectual property rights

owned by Macrovision Corporation and other rights

owners. Use of this copyright protection technology

must be authorized by Macrovision Corporation, and

is intended for home and other limited viewing uses

only unless otherwise authorized by Macrovision

Corporation. Reverse engineering or disassembly is

prohibited.

AUTO HEAD CLEANING

¡Automatically cleans video heads as you insert or

remove a cassette, so you can see a clear picture.

¡Playback picture may become blurred or interrupted

while the TV program reception is clear. Dirt accu-

mulated on the video heads after a long period of

use, or the usage of rental or worn tapes can cause

this problem. If a streaky or snowy picture appears

during playback, the video heads in your DVD/VCR

may need to be cleaned.

1. Please visit your local Audio/Video store and pur-

chase a good quality VHS Video Head Cleaner.

2. If a Video Head Cleaner does not solve the problem,

please call our help line mentioned on the front page

to locate an Authorized Service Center.

Symbol Used in This Manual

The following symbols appear in some head-

ings and notes in this manual.

VCR

: Description refers to playback or recording

of video cassette tapes.

NOTES:

¡Remember to read the instructions along with the

video head cleaner before use.

¡Clean video heads only when problems occur.

: Description refers to playback of DVD-Video

discs.

DVD-V

: Description refers to playback of Audio

CDs.

Note to CATV system installer

This reminder is provided to call the CATV system

installer’s attention to Article 820-40 of the NEC that

provides guidelines for proper grounding and, in par-

ticular, specifies that the cable ground should be

connected to the grounding system of the building,

as close to the point of cable entry as practical.

MP3 : Description refers to playback of MP3 files.

Manufactured under license from Dolby

Laboratories. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Setup

About the Video Cassettes and Discs

Playable Video Cassettes

Use only cassettes marked

with this unit.

Playable Discs

Recorded

signals

Playable

Mark (logo)

discs

Disc size

Region code

Disc types

DVD-Video

* 1,2,4,6

Example

12 cm

8cm

Title 1

Title 2

Digital video

(MPEG2)

DVD-R

Chapter 1 Chapter 2 Chapter 3 Chapter 4 Chapter 1

Chapter 2

DVD-RW

* 1,2,3,4,5,6

DVD+R

DVD+RW

* 1,2,3,4,5,6

Digital audio

MP3

Example

Audio CD

* 4,6

Track 1

Track 2

Track 5

Track 6

Track 3

Track 4

Digital audio 12 cm

Example

CD-R

Group 1

Group 2

MP3

8cm

CD-RW

Track 1

Track 3

Track 2

Track 5

* 4,5,6

If you cannot play back a disc which bears one of the marks above, check the following notes.

*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.

*2: Certain DVD-Video discs do not operate as described in this manual due to the intentions of the disc’s producers.

*3: Only the discs which have been recorded in the video format and finalized can be played back.

Discs unfinalized or recorded in the video recording format cannot be played back.

Depending on the recording status of a disc, the disc may not be played back at all or normally

(the picture or sound may be not be smooth, etc.).

*4: Scratched or stained discs may not be played back.

*5: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special

properties of discs.

*6:You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back.

Even if they are played back, the sound or video quality will be compromised.

Unplayable Discs

On the following discs, only the sound can be heard (picture cannot be viewed).

CDV

CD-G

NEVER play back the following discs. Otherwise, malfunction may result!

DVD-RAM

CD-I

Photo CD

Video CD

DVD with region codes other than 1 or ALL

DTS-CD

DVD-ROM for personal computers

CD-ROM for personal computers

On the following disc, the sound MAY NOT be heard.

Super Audio CD

Note: Only the sound recorded on the normal CD layer can be delivered.

The sound recorded on the high density Super Audio CD layer cannot be delivered.

Any other discs without compatibility indications.

Connections

Please refer to “Basic TV Connection” on the front page before you use this unit.

RF Output Channel

If there is a TV station broadcasting on channel 3,

1) Set your TV to channel 4.

2) Insert a pre-recorded tape into this unit.

3) Press the OUTPUT button on the DVD/VCR so that the VCR OUTPUT light is lit.

• If noise appears on the TV screen, press the VCR/TV button on the remote control.

4) Press the PLAY button once.

Hint

• The RF output channel may

not change when you adjust

tracking during playback.

In this case, stop playback,

and start playback again.

After that, press the PLAY

button on the DVD/VCR for 3

seconds again.

5) After a few seconds, press the PLAY button on the DVD/VCR for 3 seconds.

•

The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.

• When a picture does not appear on the TV screen, repeat step [4].

6) Press the STOP button to stop playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Cable Box or Satellite Box Connection

(Back of DVD/VCR)

Connection B

Connection A

(Cable box or

ANT-IN

(Cable box or

Satellite box)

ANT-OUT

Cable

Signal

ANT-OUT

OUT

RF Cable

(supplied)

Cable

Signal

(Back of TV)

RF Cable (supplied)

RF Cable

With this connection, channels cannot be changed on the

DVD/VCR. You can view or record ONLY the channels you have

selected on the cable box or the satellite box.

• While you are recording, only the channel selected on the box

can be viewed.

Select this connection when you want to change channels on the

DVD/VCR. With this connection, you may watch one channel

while recording another.

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

1) Turn on the DVD/VCR by pressing the POWER button, and

1) At the cable box or satellite box, select channel 3 or 4 (the

same channel as the DVD/VCR’s RF output channel.)

then, press the VCR/TV button.The “POWER” and “VCR” lights • Refer to “RF Output Channel”.

on the front panel will appear. Then, press the CHANNEL but- 2) At the TV, select the same channel as the output channel (3 or

tons to select channel 3 or 4 (the same channel as the output

channel of the cable b ox or satellite box).

• If you use the channel 4, you need to change the DVD/VCR’s

RF output to channel 4. Refer to “RF Output Channel”.

2) At the TV, select channel 3 or 4 (the same channel as you

have selected at step 1).

4) of the cable box or satellite box.

3) Turn on the DVD/VCR by pressing the POWER button, and

then, press the VCR/TV button. The “POWER” and “VCR” lights

on the front panel will appear. Then, select the channel you

want to view or record.

To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to “Playback” on page 11.

3) At the cable box or satellite box, select the channel you want to

view or record.

To view one channel while recording another

1) While you are recording on the DVD/VCR, press the VCR/TV but-

ton so that the “VCR” light disappears on the DVD/VCR.

2) At the cable box or satellite box, select the channel you want to view.

Connection to an Audio System (DVD Audio Only)

Method 1

Method 2

Stereo system

Analog audio

input jacks

Audio receiver with

Dolby Digital decoder

AUDIO

COAXIAL

Digital audio

input jack

Audio cable

(supplied)

Audio Coaxial

Digital cable

DVD

COMPONENT

DVD/VCR

DIGITAL

AUDIO S-VIDEO

DIGITAL

AUDIO OUT

(DVD only)

VIDEO OUT

OUT OUT

AUDIO OUT

(Analog)

AUDIO OUT

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

COAXIAL

OUT

AUDIO OUT

COAXIAL

VIDEO OUT

VIDEO IN

Note

• If output is Dolby Digital encoded audio, connect to a Dolby

Digital decoder, and set “DOLBY DIGITAL” to “ON” for the

AUDIO setting in the setup mode. (Refer to pages 20-21.)

• The audio source on a disc in a Dolby Digital 5.1 channel

surround format cannot be recorded as digital sound by an

MD or DAT deck.

• Unless connected to a Dolby Digital decoder, set “DOLBY

DIGITAL” to “OFF” for the AUDIO setting in the setup mode.

Playing a DVD using incorrect settings may generate noise

distortion, and may also damage the speakers. (Refer to

pages 20-21.)

Note

• Set “DOLBY DIGITAL” to “OFF” for the AUDIO setting in

the setup mode for method 1 only. Playing a DVD using

incorrect settings may generate noise distortion, and

may also damage the speakers. (Refer to pages 20-21.)

• The DVD/VCR Audio Output jacks will output either

VCR or DVD signals, depending on which OUTPUT

mode you have selected.

• Set “DOLBY DIGITAL” to “OFF” for the AUDIO setting in the

setup mode for connecting to an MD deck or DAT deck.

(Refer to pages 20-21.)

The DVD Audio Output jacks will only output DVD sig-

nals, regardless of which OUTPUT mode you have

selected. See page 9.

• By hooking this unit up to a Multi-channel Dolby Digital

decoder, you can enjoy high-quality Dolby Digital 5.1 chan-

nel surround sound as heard in the movie theaters.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Connection to a TV (Video)

Method 1

Method 2

Method 3

Basic Audio

Good picture

Better picture

Best picture

COMPONENT

VIDEO IN

AUDIO IN

S-VIDEO IN

VIDEO IN

S-Video cable

(available at

retail stores)

Video

cable

(supplied)

Audio cable

(supplied)

Component Video cables

(available at retail stores)

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

AUDIO S-VIDEO

OUT OUT

DVD/VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO OUT

DVD

DVD/VCR

AUDIO OUT AUDIO IN

VCR

COMPONENT

VIDEO OUT

DIGITAL

AUDIO S-VIDEO

AUDIO OUT

OUT

ANT-IN

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

DVD

AUDIO S-VIDEO

OUT OUT

COAXIAL

COMPONENT

VIDEO OUT

VIDEO IN

DIGITAL

VIDEO OUT

VIDEO IN

AUDIO OUT

COAXIAL

VIDEO OUT

S-VIDEO OUT

(DVD only)

DVD

DIGITAL

AUDIO S-VIDEO

OUT OUT

AUDIO OUT

COMPONENT VIDEO OUT

(DVD only)

COAXIAL

(Analog) AUDIO OUT

Note

•

Connect this unit directly to the TV. If the A/V cables are connected to a VCR, pictures may be distorted due to the copy protection system.

•

The COAXIAL, DVD AUDIO OUT, S-VIDEO OUT, and COMPONENT VIDEO OUT jacks are only useful in DVD mode.

• The DVD/VCR Audio Output jacks will output either VCR or DVD signals, depending on which OUTPUT mode you have

selected. The DVD Audio Output jacks will only output DVD signals, regardless of which OUTPUT mode you have selected.

See page 9.

Front & Rear Terminals

DVD ANALOG AUDIO OUT

jacks

Connect the supplied audio

cables here to the Audio In

jacks of a television or other

audio equipment. (DVD only)

DVD/VCR AUDIO OUT jacks

Connect the supplied audio

cables here to the audio In

jacks of a television or other

audio equipment.

AUDIO IN jacks

Connect audio cables coming

from the audio out jacks of a

camcorder, another VCR, here.

ANT IN jack

Connect your antenna

or cable box here.

DVD

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

ANT-IN

POWER

COMPONENT

VIDEO OUT

COAXIAL jack

DIGITAL

AUDIO S-VIDEO

REW

F.FWD STOP/EJ

OUT

AUDIO OUT

Connect an optional coaxial

digital audio cable here to

the coaxial digital audio in

jack of an audio receiver.

(DVD only)

DVD

AUDIO S-VIDEO

DVD/VCR

AUDIO OUT AUDIO IN

VCR

COMPONENT

VIDEO OUT

DIGITAL

OUT

ANT-IN

AUDIO OUT

R ^L

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

P^R

[Front of

DVD/VCR]

[Back of DVD/VCR]

ANT OUT jack

Connect the

supplied RF

cable to the

antenna input

on your TV.

S-VIDEO OUT jack

Connect an optional

S-Video cable here

to the S-video in

jack of a television.

(DVD only)

COMPONENT VIDEO

OUT jacks

DVD/VCR VIDEO OUT jack VIDEO IN jack

Connect the supplied yellow Connect a cable com-

Connect optional component video cable here to the TV’s ing from the video out

video cables here to the

component video in jacks of

a television.

video in jack.

jack of a camcorder,

another VCR, here.

(DVD only)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

About the Remote Control and Front Panel

VCR mode

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

Remote Control

DVD-V

MP3

VCR

•To select channel.

•The +10 button has no effect

in VCR mode.

•

To select chapter or title directly. •To select track directly.

OPEN/CLOSE

+1 0

POWER

/EJECT

SPEED

AUDIO

•To search forward/backward

through a disc.

•To search forward/backward

through a disc.

•To forward/backward a tape.

•

To begin slow forward/reverse

playback during the pause mode.

SKIP/CH.

• To select an item

VCR/TV

SLOW

on the VCR Menu.

ENTER

•To move the cursor and

• To advance to the next

VCR Menu.

determine its position.

VCR

+1 0

DVD

•

To go back one step during

DISPLAY

PAUSE

clock and timer setting.

A-B

•To repeat between your

chosen point A and B.

•To repeat between your

chosen point A and B. (CD)

PLAY

ANGLE

AUDIO

•To select camera angles on

STOP

a disc.

REC/OTR

•To select audio languages on •To select STEREO,

a disc.

L-CH or R-CH. (CD)

ENTER

•To clear the markers. (CD)

SETUP TOP MENU

RETURN

CLEAR/

C. RESET

•To clear the markers.

•To clear the numbers

entered incorrectly.

•To remove status No.

•To exit the VCR Menu.

•To reset the tape counter.

MODE

CLEAR/

C. RESET

in program input.

MODE

V.SURR.

ANGLE

•To clear the numbers

SUBTITLE

T-SET

entered incorrectly.

REPEAT

A-B

DISPLAY

DVD

•To display the current disc

•To display the current time,

tape counter, and channel.

mode.

• To select the DVD output

mode.

• To select the DVD output

mode.

• To activate the remote control • To activate the remote control

in DVD mode.

MODE

•To call up the Menu

•To call up the MP3 menu.

•To call up the VCR Menu.

on a disc.

(MP3)

•To arrange the playing

order or play randomly.

•To set black level on/off.

OPEN/CLOSE

/EJECT

Installing the Batteries

for the Remote Control

•To open or close the disc

•To eject the video cassette

tray.

from the VCR.

• To pause tape playback or

recording.

•To advance playback

one frame at a time.

PAUSE

•To pause disc playback.

•To advance playback

one frame at a time.

• To pause disc playback.

Install two AA batteries

(supplied) matching the polarity indi-

cated inside battery compartment of

the remote control.

• To begin tape playback.

• To begin disc playback.

PLAY

POWER

•To turn the unit on or off.

REC/OTR

REPEAT

• To start a recording.

•To play a track or disc

repeatedly. (CD)

•To play a track, group or disc

repeatedly. (MP3)

•To return to the previous

operation on the DVD setup

menu.

•To play a chapter or title

repeatedly.

RETURN

•To return to the previous

operation on the DVD setup

menu.

•To search track.

•

To search chapter, title or time.

•To search time. (CD)

MODE

•To call up the index or time

search menu.

•To rapidly return to

a location of disc.

•Search the markers.

•Search the markers. (CD)

SETUP

•To call up the DVD setup

menu.

•To call up the DVD setup

menu.

SKIP/CH.

• To change channels.

•

To adjust the tracking manually

during playback.

• To skip chapters.

• To skip tracks.

SLOW

• To view the tape

in slow motion.

SPEED

STOP

Keep in mind the following when using

the remote control:

• Make sure that there is no obsta-

cle between the remote and the

remote sensor on the unit.

• Use within the operating range

and angle, as shown.

•To select the recording speed.

• To stop playback.

• To stop playback or recording.

SUBTITLE

T-SET

•To put the VCR into standby

mode for a timer recording.

•To select subtitles on a disc.

•

To return to the top file of the

highest hierarchy in the program

and MP3 menu. (MP3)

TOP MENU

VCR

•To call up the Top Menu

on a disc.

• To select the VCR output

mode.

• To activate the remote control

in VCR mode.

VCR/TV

V.SURR.

• To select DVD position or

TV position.

• To select CD/MP3 position

or TV position.

• To select VCR position or

TV position.

•To set virtual surround on/off. •To set virtual surround on/off.

Remote

control

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Front Panel Display

Lights up when the disc is inserted.

Lights up when the inserted

Illuminates when

the unit is on.

Lights up during a recording.

disc is being played back.

Flashes when an unaccept-

able disc is installed.

Flashes when a recording is paused.

OPEN/CLOSE

OUTPUT

POWER

VCR

DVD

SKIP

DISC IN

REW

F.FWD STOP/EJECT PLAY

REC/OTR

STOP

PLAY

G SKIP

CHANNEL

REV

FWD

Lights up when the timer recording

or an OTR recording has been set.

VCR/DVD Selection

Because this product is a combination of a VCR and a DVD player, you must select which com-

ponent you wish to operate with the OUTPUT button.

VCR MODE

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

OUTPUT

Press the VCR button on the remote control.

POWER

VCR

DVD

SKIP

DISC IN

REW

.FWD STOP/EJECT PLA

REC/OTR

STOP

PLAY

SKIP

CHANNEL

REV

FWD

(Verify that the VCR OUTPUT light is lit.)

SKIP/CH.

VCR/TV

SLOW

DVD MODE

VCR

+1 0

DVD

VCR button

DVD button

DISPLAY

PAUSE

Press the DVD button on the remote control.

(Verify that the DVD OUTPUT light is lit.)

OUTPUT

PLAY

STOP

VCR

DVD

REC/OTR

Note

DVD OUTPUT

light

ENTER

• Pressing only the OUTPUT button on the front

panel DOES NOT switch the mode of the

remote control. You MUST select the correct

mode on the remote control.

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

V. SURR.

ANGLE

SUBTITLE

T-SET

OUTPUT button

REPEAT

A-B

VCR OUTPUT

light

• The DVD/VCR Audio Out and Video out jacks

will output either VCR or DVD signals, depend-

ing on which mode you have selected. The

DVD Component Video, S-Video Out, Audio

Out, and Digital Audio Out jacks will only output

DVD player signals, no matter which mode you

have selected.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

First Time Use

Turn on the unit for the first

time

To Preset the Channel Again

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

0 3 1 5 2 0 0 4

menu appears.

VCR

HOUR MINUTE AM/PM

– – – – – –

2) Select "CHANNEL SET UP" by pressing

the K or L button. Then, press the B but-

ton.

VCR

Select the current year

3) Select "AUTO SET UP" by pressing the

K or L button. Then, press the B button.

After scanning, the tuner stops on the low-

est memorized channel.

Turn on the TV and select

channel 3.

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

To Change the On-Screen Language

1) Press the MENU button until the main

CLOCK SET

MONTH DAY YEAR

menu appears.

0 3 1 5 MON 2 0 0 4

POWER

Remote Control TV Screen

2) Select "LANGUAGE SELECT" by press-

HOUR MINUTE AM/PM

0 5 – – – –

ing the K or L button. Then, press the

button.

LANGUAGE SELECT

3) Select "ENGLISH" , "FRANCAIS" or

Select the current hour

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

"ESPAÑOL" by pressing the K or L but-

ton. Then, press the CLEAR/C.RESET

button.

Hint

CLOCK SET

MONTH DAY YEAR

• If you accidentally select Spanish or

French and need English: Press the

MENU button and choose SELEC.

0 3 1 5 MON 2 0 0 4

IDIOMA, or SELECTION LANGUE. Press

the B button, and select ENGLISH. Finally,

press the CLEAR/C.RESET button.

HOUR MINUTE AM/PM

0 5 4 0 – –

CH 01

AUTO SET UP

Select the current minute

Clock Set Up

VCR

Did you connect the cable from the cable box or

the satellite box to the DVD/VCR’s ANT IN jack?

YES

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

CLOCK SET

MONTH DAY YEAR

0 3 1 5 MON 2 0 0 4

Yes Press the MENU

HOUR MINUTE AM/PM

[ON]

button to exit

0 5

4 0

P M AM

B PM

• Refer to “Hint for Cable Box

or Satellite Box” section on

• Select CLOCK SET when

you press the MENU but-

ton. Go to step [2].

Select “AM” or “PM”

page 6.

No Please wait for a few minutes.

After TV station scanning...

• The tuner stops on the lowest memorized

channel.

• You can select only the channels memo-

rized in this unit by using the CHANNEL

buttons.

• If "AUTO SET UP" appears on the TV

screen again, check the cable connections.

Then, press the B button once again.

To exit the CLOCK SET

screen.

CLOCK SET

MONTH DAY

0 3 – –

YEAR

– – – –

HOUR MINUTE AM/PM

– – – – – –

Hint

Select the current month

• Repeat these steps only if either there

was a power failure or this unit has been

unplugged for more than 30 seconds.

• To go back one step, press the s button

(during the steps [2] to [7].)

•

Your clock setting will be lost if either there

is a power failure or this unit has been

unplugged for more than 30 seconds.

To Select a Channel

You can select a channel by directly

entering channel using the Number but-

tons on the remote control.

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

– – – –

Notes for using the Number buttons:

• When selecting cable channels which

are higher than 99, enter channel

numbers as a three-digit number.(For

example: 117, press 1,1,7)

HOUR MINUTE AM/PM

– – – – – –

Select the current day

• You must precede single-digit channel

numbers with a zero (For example:

02, 03, 04 and so on).

–

Download from Www.Somanuals.com. All Manuals Search And Download.

VCR Functions

Playback

Before:

Hint

Turn on the TV and select

channel 3.

• If channel 3 is already occupied for broad-

casting, see “RF Output Channel” section.

OPEN/CLOSE

POWER

/EJECT

SPEED

AUDIO

• When a tape with-

out record tab is

inserted, the

OPEN/CLOSE

SKIP/CH.

DVD/VCR will start

playback automati-

cally.

• Tracking will be

automatically

VCR

VCR/TV

SLOW

POWER

VCR

REW

F.FWD STOP/EJECT PLAY

REC/OTR

CHANNEL

VCR

+1 0

DVD

DISPLAY

PAUSE

Remote Control TV Screen

adjusted. To adjust

the tracking manu-

ally, press the

PLAY

PLAYB

PLAY

STOP

3 2

REC/OTR

CHANNEL buttons.

OPEN/CLOSE

/EJECT

STOP

EJECT

Recording & OTR (One Touch Recording)

Before:

Turn on the TV and selct

Hint

channel 3.

• To view one chan-

nel while recording

another

• If channel 3 is already occupied for

broadcasting, see “RF Output Channel” section.

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

VCR

1) While you are

recording on the

DVD/VCR, press

the VCR/TV button.

2) At the cable box

or satellite box,

select the channel

you want to view.

• If you have connect-

ed the DVD/VCR to

a cable box or satel-

lite box, refer to

VCR

OPEN/CLO

SKIP/CH.

Remote Control TV Screen

VCR/TV

SLOW

POWER

REW

F.FWD STOP/EJECT PLAY

REC/OTR

CHANNEL

SKIP/CH.

VCR

+1 0

DVD

DISPLAY

PAUSE

CH12

PLAY

• Select the

desired channel

with tab

STOP

REC/OTR

• Select the desired tape

speed

ENTER

“Hint for Cable Box

or Satellite Box”

section on page 6.

SPEED

SETUP TOP MENU

RETURN

Tape Speed

Recording/Playback Time

Type of tape

SP mode

SLP mode

T60

T120

2hours

6hour

T160

2-2/3hours

8hour

1hour

3hour

Accidental erasure prevention

To prevent accidental recording on a pre-

REC/OTR

recorded cassette, remove its record tab. To

record later, cover the hole with cellophane

tape.

REC

You can select a set recording time by pressing

the REC/OTR button repeatedly.

Record tab

REC

OTR(0:30)

OTR(1:00).....

(Normal recording)

INPORTANT: You CANNOT copy a DVD to a videotape.

OTR(8:00)

OTR(7:30)

To stop recording temporarily (Pause mode)

OPEN/CLOSE

/EJECT

STOP

EJECT

Press the PAUSE/STILL button.

STOP

• During the rec-pause mode, five

marks appear on the TV

mark represents one minute.

• Press it again to resume recording.

screen. Each

Other Operations

To cue or review picture during playback

(Picture Search)

Counter Reset

Hint

Press the CLEAR/C.RESET button.

•

Still/Slow/Pause

mode will be

Press the F.FWD or REW button.

To play back in slow motion

• Press it again and the DVD/VCR will search in

super high speed. (in the LP/SLP modes only)

automatically

cancelled after 5

minutes to pre-

vent damage to

the tape and the

video head.

Press the SLOW button during playback or the still

mode.

To freeze the picture on TV screen during play-

• If the noise bars appear on the TV screen, you can

reduce it by pressing the CHANNEL buttons.

back (Still mode)

Press the PAUSE/STILL button. Each time you

press the button, the picture will be forwarded by

one frame.

• To return to

playback from

the Picture

Search/Still/

Slow mode,

press the PLAY

button.

Auto Rewind

When a tape reaches its end during playback, fast-for-

ward, or recording (except timer recording and One

Touch Recording), the tape will automatically rewind

to the beginning. After rewinding finishes, the

DVD/VCR will eject the tape.

• If the picture begins to vibrate vertically during the

still mode, stabilize the picture by pressing the

CHANNEL buttons.

• If the picture is distorted or rolling vertically, adjust

the vertical hold control on your TV, if equipped.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display

VCR

SKIP/CH.

To call up the main menu 3 To select

VCR/TV

SLOW

-MENU-

CHANNEL SET UP

+1 0

DISPLAY

VCR

DVD

PAUSE

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

AUTO SET UP

B MANUAL SET UP

PLAY

STOP

LANGUAGE SELECT

REC/OTR

To choose an item

To exit the menu

ENTER

-MENU-

CLEAR/

C. RESET

SETUP TOP MENU

RETURN

TIMER PROGRAMMING

MODE

CLEAR/

C. RESET

AUTO REPEAT [OFF]

B CHANNEL SET UP

CLOCK SET

MODE

V.SURR.

ANGLE

SUBTITLE

T-SET

REPEAT

A-B

LANGUAGE SELECT

Recording Features

Timer Recording

•Insert a tape with its record tab into the DVD/VCR.

VCR

ONE TIME PROGRAM

PROGRAM NUMBER

Select the desired start time

VCR

DATE

0 5 / 0 3 MON

(hour)

-MENU-

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

ONE TIME PROGRAM

PROGRAM NUMBER

B TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

CHANNEL

1 6

DATE

0 5 / 0 3 MON

REC SPEED SP

B SP

SLP

START TIME 0 7 : 3 0 – –

END TIME – – : – – – –

CHANNEL

– –

[ON]

Select the desired recording speed

REC SPEED – –

• To set another program after step [9], press the

button. Then, continue with step [2].

CLEAR/

C. RESET

Select the minute

PROGRAM NUMBER

DATE – – / – –

START TIME – – : – – – –

END TIME – – : – – – –

SUBTITLE

T-SET

CHANNEL

– –

REC SPEED – –

•

light on the front panel appears.

The DVD/VCR will change to the DVD mode.

Select an empty program

number

Hint

ONE TIME PROGRAM

PROGRAM NUMBER

• To go back one step, press the

the steps [3] to [9].)

button (during

DATE

0 5 / 0 3 MON

START TIME 0 7 : 3 0 PM

END TIME – – : – – – –

CHANNEL

– –

To Check, Correct, or Cancel a

Timer Program

REC SPEED – –

B PM

PROGRAM NUMBER

B ONCE

DAILY

WEEKLY

Select “AM” or “PM”

1) Press the SUBTITLE/T-SET button

then, the VCR button on the remote

control.

2) Select main menu by pressing the

MENU button.

Repeat the procedure in steps 5

and 6 to set the end time.

Select “ONCE”, “DAILY”

(Mon-Fri), or “WEEKLY”

3) Select "TIMER PROGRAMMING"

by pressing the K or L button.

Then, press the B button.

4) Select the program number which

you want to check by pressing the

or L button. The details of the pro-

gram you selected will appear on

the TV screen.

Select the desired month

ONE TIME PROGRAM

PROGRAM NUMBER

DATE 0 5 / 0 3 MON

START TIME 0 7 : 3 0 PM

END TIME 0 8 : 3 0 PM

PROGRAM NUMBER

• Go to the digit you want to change

by pressing the B or s button.

Then, enter correct numbers by

pressing the K or L button.

• You may cancel the entire program

by pressing the s button while the

program number flashes.

5) Press the CLEAR/C.RESET button

to exit.

6) Press the SUBTITLE/T-SET button

to return to timer stand-by mode.

DATE

0 5 / 0 3 MON

START TIME – – : – – – –

END TIME – – : – – – –

CHANNEL

1 6

REC SPEED – –

CHANNEL

– –

REC SPEED – –

Select the desired channel

•

If you have connected the DVD/VCR to a

cable box or satellite box as the Connection

A on page 6, select the VCR to channel 3

or 4 (the RF output channel of the cable or

satellite box). Then, select the channel to be

recorded at the cable box or satellite box.

Leave the cable box or satellite box on for

timer recording.

Select the desired day

• You can program one

year in advance.

To cancel a Timer Recording in

progress

Press the STOP/EJECT button on

the DVD/VCR.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Operation During Timer Recording

• If there is a power failure or the DVD/VCR has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

• If a tape is not in the DVD/VCR or does not have the record tab, the

insert a recordable tape.

• If a tape ends during timer recording, the VCR will stop, eject the tape, and switch to the DVD mode automatically as the

(If the DVD power is off, the VCR will become STANDBY status).

light flashes and timer recording cannot be performed. Please

light flashes.

• When all timer recordings are finished, the

• When timer recordings are set, the light will appears. To use the VCR as usual until the time for the recording, press the SUBTITLE/T-

SET button so that the light disappears. Press the VCR/TV button to choose the VCR position. Select either VCR or DVD mode, then

light will flash.

continue with the other features as described in this manual.

If you want to use the DVD player during a VCR timer recording or while the

light is on or flashes.

• You can use the DVD player while the

light is on or flashes, or during a timer recording. Press the POWER button to turn on the DVD.

Press the DVD button on the remote control to choose DVD mode, then continue with the other DVD features as described in this manu-

al. You don’t have to set the TIMER off to use the DVD only.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

1) Insert a pre-recorded tape into the playing VCR.

(Back of TV)

2) Insert a tape with its record tab into the recording

(Back of another source)

(Back of Recording DVD/VCR*)

DVD/VCR.

AUDIO OUT

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

DVD

AU-VIOIDEO

DVD/VCR

AUDIO OUT

VCR

AUDIO IN

COMPONENT

VIDEO OUT

3) Press the SPEED button on the remote control of the

recording DVD/VCR to select the desired recording

speed (SP/SLP).

COMPONENT

VIDEO OUT

ANT-IN

DIGITAL

AUDIO OUT

OU UT

ANT-IN

Connect

VIDEO OUT ^IN

VIDEO OUT

VIDEO

ANT-OUT

COAXIAL

VIDEO OUT

VIDEO IN

ANT-OUT

RF cable

(supplied)

*Front input jacks are also available

4) Select the "L1" or "L2" position on the recording DVD/VCR.

•

To use the input jacks on the back of this unit, select

"L1" position by pressing [0], [0], [1] on the remote

control or the CHANNEL buttons.

Audio/Video cables

(supplied)

Hint

• To use the input jacks on the front of this unit, select

"L2" position by pressing [0], [0], [2] on the remote

control or the CHANNEL buttons.

• For best results during dubbing, use the front panel controls whenever possible.

The remote control might affect another source’s operation.

• Always use video-quality shielded cables with RCA-type connectors. Standard

5) Press the REC/OTR button on the recording DVD/VCR.

6) Begin playback of the tape.

audio cables are not recommended.

• You can use a video disc player, satellite receiver, or other audio/video compo-

nent with A/V outputs.

• “L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

• “L2” input jacks are on the front of this DVD/VCR.

7) To stop recording, press the STOP/EJECT button on

the recording DVD/VCR, then stop playback of the tape

in another source

MTS System (Multi-Channel Television Sound)

VCR

WhenYou Receive or Record a

VCR

Program Broadcast in MTS

-MENU-

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

• When you receive a broadcast on

the VCR, you can check the type

of the broadcast by pressing the

DISPLAY button.

• When "TV STEREO" or "SAP"

selection is valid, select them by

following steps. This selection is

needed when you record the pro-

gram.

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

B TV STEREO

LANGUAGE SELECT

B AUDIO OUT

TV STEREO

SAP

[ON]

SAP

Select “TV STEREO” or

“SAP”

• SAP means Second Audio

Program (usually second lan-

guage).

To exit the menu.

CLEAR/

C. RESET

AUDIO OUT

B HIFI

MONO

[ON]

When You Play Back a Tape

Recorded in Hi-Fi Stereo

Display on the

TV screen

Type of

broadcast

STEREO/SAP

Selection

Regular

-None-

-Invalid-

(monaural audio)

• If you have connected a stereo TV to

this DVD/VCR, select "STEREO".

• If you have connected a monaural TV

to this DVD/VCR, select "MONO".

Stereo

broadcast

STEREO

Select “HIFI” or “MONO”

TV STEREO

(main audio program)

Bilingual

broadcast

SAP

(second audio program)

TV STEREO

Your Selection

STEREO

Stereo &

Bilingual

broadcast

(stereo main audio program)

MONO

Monaural

L+R

STEREO

SAP

L-channel

R-channel

Type of recorded tape

SAP

(second audio program)

To exit the menu.

non Hi-Fi tapes

Monaural

Hi-Fi tapes

recorded in

Hi-Fi stereo

CLEAR/

C. RESET

Hi-Fi tapes

recorded main

audio program

Main audio

program

Main audio

program

Main audio

program

Hi-Fi tapes

recorded second

audio program

Second audio Second audio Second audio

program

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Features

Time Search

Index Search

Auto Repeat

You can repeat playback of a

whole tape automatically.

You can select a specific time for

fast forwarding or rewinding.

You can specify the number of pro-

grams to be skipped.

• Insert a tape into this unit.

VCR

-MENU-

INDEX SEARCH

TIME SEARCH

– : – –

MODE

– –

TIMER PROGRAMMING

B AUTO REPEAT [OFF]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

[ON]

x2 (Twice)

x1 (Once)

Select the desired length of

time for fast forwarding or

rewinding

INDEX SEARCH

0 3

-MENU-

TIME SEARCH

TIMER PROGRAMMING

B AUTO REPEAT [ON]

CHANNEL SET UP

CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

2 : 5 0

01 ~ 20

CURRENT PROGRAM

Beginning

End

of tape

[ON]

Pro.1 Pro.2 Pro.3 Pro.4 Pro.5

02 01 01 02 03

INDEX MARK

0:01~ 9:59

(1 minute~9 hours

and 59 minutes)

AUTO REPEAT

To rewind

To fast forward

After searching,

To rewind

To fast forward

After searching,

Hint

• To cancel Auto Repeat, follow steps [1]-[2]

above. Then, press the B button, so that

[OFF] appears beside AUTO REPEAT. Press

the CLEAR/C.RESET button to exit.

• If menu remains on the TV screen at step [3],

press the CLEAR/C.RESET button to exit.

PLAYB

Hint

• This unit stores index mark at the begin-

ning of the recording. There should be

time gap between two index marks for the

Index Search.

Hint for Timer Search & Index Search

• These functions are not available during recording.

• Press the STOP button to stop the search.

• If the end of the tape is reached during a Search, this unit will cancel the search and

rewind the tape.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD Functions

Playback

Before: Turn on the TV, amplifier and any other components which

are connected to this unit. Make sure the TV and audio receiver

are set to the correct channel or input.

Hint

OPEN/CLOSE

/EJECT

POWER

• When you play an MP3

file, details on page 16.

SPEED

AUDIO

• A “prohibited icon” may

SKIP/CH.

(

⇒p.16

)

appear at the

DVD-V

DVD

MP3

top-right on

VCR/TV

SLOW

the TV

screen when the opera-

tion is prohibited by the

disc or this unit.

VCR

+1 0

DVD

DISPLAY

PAUSE

PLAY

• Some DVDs may be

played from title 2 or 3

due to specific pro-

grams.

• During the playback of a

two-layered disc, pic-

tures may stop for a

moment. This happens

while the 1st layer is

being switched to the

2nd layer. This is not a

malfunction.

OPEN/CLOSE

/EJECT

POWER

STOP

REC/OTR

Remote Control TV Screen

STOP

PLAY

OPEN/CLOSE

OUTPUT

POWER

VCR

DVD

SKIP

DISC IN

REW

F.FWD STOP/EJECT PLAY

REC/OTR

STOP

PLAY

G SKIP

CHANNEL

REV

FWD

OPEN/CLOSE

/EJECT

4 3

DVD menu

To use the SKIP/REV, FWD/SKIP buttons on the

Main Unit

DVDs may contain menus to access special features. Press

appropriate Number buttons or use the arrow (K/L/s /B)

buttons to highlight your selection on the DVD main menu

and press the ENTER button to confirm.

DVD-V

MP3

Press once to skip chapters or tracks to a desired point.

Press and hold to change forward or reverse playback

speed.

Calling up a Menu Screen during Playback

• Press the MENU button to call up the DVD menu.

• Press the TOP MENU button to call up the title menu.

Note

Fast Forward/Reverse Search

DVD-V

MP3

• Menu operations may vary depending on the disc. Refer to

the manual accompanying the disc for details.

Press the g or h button repeatedly dur-

ing playback to select the required forward or

reverse speed.

Resume

To continue playback, press the PLAY

DVD-V

MP3

button.

Press the STOP button. Resume message will appear on

the TV screen.

• For DVDs, fast forward or reverse search speed is different

depending on the disc. Approximate speed is

1(x2),2(x8),3(x50),4(x100).

• For Audio CDs, approximate speed is x16.

• For MP3, approximate speed is x8.

Press the PLAY button, play-

back will resume from the

point at which playback was

Press 'PLAY' to play from here.

To play the beginning,

press 'STOP' first and then 'PLAY'.

stopped.

Hint

• To cancel resume, press the

STOP button one more time

during the Stop mode.

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-

back mode are blurred. (Refer to pages 20-21.)

• For MP3, playback will resume from the beginning of the

track at which playback was stopped.

Slow Forward/Slow Reverse

DVD-V

Paused and Step-by-Step Playback

Press the g or h button repeatedly dur-

ing the pause mode to select the required for-

ward or reverse speed.

To continue playback, press the PLAY button.

• Slow forward or reverse speed is different depending on

the disc. Approximate speed is 1(1/16),2(1/8),3(1/2).

DVD-V

MP3

Press the PAUSE button during playback.

To continue playback, press the PLAY

button.

DVD-V

Hint

The disc goes forward by one frame each time the PAUSE

button is pressed during the pause mode.

To continue playback, press the PLAY button.

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the slow play-

back mode are blurred. (Refer to pages 20-21.)

Hint

• Set “STILL MODE” to “FIELD” in the Display menu if pictures in the pause

mode are blurred. (Refer to pages 20-21.)

–

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 Playback

MP3 is a method of compressing files. You can copy MP3 files on CD-R/RWs from a computer and play the files on this unit.

DVD

MP3

STOP

Insert a MP3-format disc, then press

the MENU button to call up the MP3

menu on the TV screen.

Hint

FILE LIST

• Some selections may take a while to be recognized.

DISC NAME

FOLDER

MP3

• Press the TOP MENU button to return to the first item.

• Folders are known as Groups; files are known as Tracks.

• MP3 files are accompanied by

• Folders are accompanied by

folder name

file name

icon.

ENTER

PLAY

1/2

folder name

icon.

• A maximum of 255 folders can be recognized.

• A maximum of 512 files can be recognized.

• Up to 8 hierarchies can be created.

When selecting the folder:

• Press the B button when you

want to go to the next hierar-

chy.

• Press the s button when you

want to go back to the previ-

ous hierarchy.

ENTER

This player recommends the files recorded under the following circumstances:

• Sampling frequency: 44.1kHz or 48kHz

• Constant bit rate: 112kbps ~ 320kbps.

The On-Screen Display

You can check the information about the DVD disc by pressing the DISPLAY button on the remote control.

DVD

DVD-V

DISPLAY

Current playback status

4/12 0:03:21 - 0:02:15

Remaining time of the current track

Elapsed time of the current track

Current playback status

11/16 0:00:00 - 0:03:30

Remaining time of the current chapter

Elapsed time of the current chapter

TR(Track):

Current track number / Total tracks

DISPLAY

CH(Chapter):

Current chapter number / Total chapters

ALL:

DISPLAY

Current track number / Total tracks

4/12 0:13:45 - 0:45:40

Current repeat setting appears only when

the repeat setting is active

T: Track repeat

1/3 0:00:00 - 1:23:45

A: All Tracks repeat

Remaining time of the current title

Elapsed time of the current title

B: A-B repeat

Remaining time of the current audio CD

Elapsed time of the current audio CD

DISPLAY

TT(Title):

Current title number / Total titles

DISPLAY

DVD

Layer numbers, appears only when playing

a two-layered Disc

MP3

DISPLAY

L0: Layer 0 is playing

Current playback status

L1: Layer 1 is playing

TRACK 01

Current repeat setting appears only when

the repeat setting is active

The name of the file currently in play

will be displayed.

C: Chapter repeat / T: Title repeat /

DISPLAY

B: A-B repeat

TR(Track):

Current Track number / Total Tracks

BIT RATE: The amount of audio and video

data currently being read

1/36 0:01:15

DISPLAY

Current Repeat setting, if active

T: Track repeat

G: Group (folder) repeat

A: Disc repeat

Elapsed playing time of the current track

DISPLAY

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Search Function

Track Search

Title / Chapter Search

Time Search

DVD

MP3

DVD-V

Using the number buttons

Using the SEARCH MODE button

PLAY

TOTAL 1:29:00

MODE

/12

MODE

x repeatedly until this

screen appears

+1 0

x1(Press once) for the chapter search

x2 (Press twice) for the title search

•For single digit tracks (1-9), press a

single number (eg. track 3, press 3).

•To play track 26, press +10, 2, 6 of the

Number buttons.

TOTAL 1:29:00

/12

Within 30 seconds

+1 0

Using the SEARCH MODE button

Within 30 seconds

• e.g. When there is no need to enter a

number, “0” appears automatically. For

example, “0:0_:_ _” appears in the

Time Search display if the total time

of the disc is less than 10 minutes.

MODE

Using the SKIP

buttons

PLAY

Current Chapter

(CH)

+1 0

CH 1 CH 2 CH 3 CH 4

Within 30 seconds

SKIP/CH.

SKIP

Using the SKIP

buttons

Note

¡Depending on the disc being played,

this function can also be performed by

directly entering the desired chapter

number with the number buttons.

Refer to the manual accompanying

the disc.

PLAY

Current Track

(TR)

TR 1 TR 2 TR 3 TR 4

SKIP/CH.

SKIP

Marker Setup

DVD

To return to the marker

later

To exit the marker screen

DVD-V

This feature allows you to assign a specific

point on a disc to be called back later.

To set a marker

RETURN

PLAY

MODE

x repeatedly until this

screen appears

MODE

x repeatedly until this

screen appears

Notes

¡Opening the disc tray or turning off the

power will erase all markers.

¡Selecting “AC” at step [2] in the sec-

tion “To set a marker” will also erase

all markers.

¡To clear a marker, select the marker to

be cleared at step [2] in the section

“To return to the marker later,” and

then press the CLEAR/C.RESET but-

ton.

ENTER

at the desired marker

•Playback will restart from the specific point

which you set.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Repeat / Random / Programmed Playback

Repeat Playback

Repeat A-B Playback

Programmed Playback

DVD

DVD-V

DVD

MP3

DVD-V

MP3

You may determine the order in which

tracks will play.

PLAY

A-

Repeat function is available only during playback.

STOP

CD-DA

TOTAL 0:00:00

A-B

PLAY

at your desired starting point (A).

ENTER

MODE

REPEAT

x1 (Press once)

A-B

Each time the REPEAT button is pressed...

DVD-V

CD-DA

TOTAL 0:08:00

at your desired end point (B).

3:30

2:30

10 1:30

ALL CLEAR

¡Point B should be in the same title

or track as point A is.

(current chapter repeat)

(current title repeat)

(repeat off)

CHAPTER

ENTER

2/2

3:30

TITLE

ENTER

¡To exit the sequence, press the A-B

button.

¡To cancel Point A, press the

CLEAR/C.RESET button.

¡This function does not work in the

other repeat modes.

Up to 99 programs can be

stored.

OFF

While a MP3 folder is open:

• For the next hierarchy,

press the B button.

• For the previous hierarchy,

(current track repeat)

(entire disc repeat)

(repeat off)

press the s button.

TRACK

ALL

• When there are more than

eight tracks, press CH.L

button to see the next

page.

Random Playback

OFF

This shuffles the playing order of tracks

instead of playback in the sequence.

DVD

PLAY

MP3

(current track repeat)

(current group repeat)

(entire disc repeat)

(repeat off)

TRACK

GROUP

ALL

Notes

RANDOM

STOP

CD-DA

TOTAL 0:45:55

¡Press the CLEAR/C.RESET button

at step [2] to erase the most recent-

ly entered program.

RANDOM PROGRAM

--no indication--

MODE

PLAY

¡To erase all programs at once,

select “ALL CLEAR’’ and press the

ENTER button at step [2].

OFF

x2 (Press twice)

¡While a program is being played

back, the STOP button works as fol-

lows;

¡Repeat setting will be cleared when

moving to another title, chapter, or track.

¡Repeat playback are not available with

all discs or during repeat A-B playback.

PLAY

⇒

Press the STOP button and then

PLAY button, so that the pro-

grammed playback restarts. (CD

playback restarts from the current

point. MP3 playback restarts from

the beginning of the current track.)

Press the STOP button twice and

then PLAY button, so that playback

restarts from the first track in the

original order. However, your pro-

grammed playback can be restarted

when you follow the above steps.

(Your programs are still stored until

either the disc tray is open or power

is turned off.)

Note

¡If you want to repeat the current

track in the random selections,

press the REPEAT button repeat-

⇒

edly until

TRACK appears dur-

ing playback. If you want to repeat

the entire random selections,

press the REPEAT button repeat-

edly until

playback.

ALL appears during

¡To repeat the current track in the

program, press the REPEAT but-

ton repeatedly until “

TRACK’’

appears during playback.

To repeat the entire program press

the REPEAT button repeatedly until

“

ALL’’ appears during playback.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Special Settings

Subtitle Language

Audio Language

Stereo Sound mode

DVD

DVD-V

This unit allows you to select a subtitle

language (if available) during DVD play-

back.

This unit allows you to select an audio

language (if multiple languages are

available) during DVD playback.

This unit allows you to select a sound

mode during CD playback.

PLAY

STEREO

PLAY

1.ENG/6

1.ENG Dolby D 3/2.1ch 48k/3

AUDIO

SUBTITLE

T-SET

Each time you press the AUDIO button;

For example

Each time you press the SUBTITLE/T-

SET button, subtitle languages change.

For example

Each time you press the AUDIO button;

(right and left channels

are active)

(left channel is active)

STEREO

L-CH

(English audio)

(Spanish audio)

ENG

(English subtitles)

(French subtitles)

ENG

SPA

FRE

(right channel is active)

R-CH

Note

¡If the Virtual Surround setting is “1’’ or

“2’’, the sound mode will be fixed to

STEREO, and can not be changed.

(French audio)

FRE

OFF

(no subtitles)

Camera Angle

Virtual Surround

DVD

To set subtitle ON/OFF

DVD-V

MP3

Some DVD discs may con-

tain scenes which have

DVD

PLAY

1.ENG/6

been shot simultaneously

from various angles. You can change

You can enjoy simulated surround

sound on your existing 2 channel

stereo system.

the camera angle if the (

) icon

SUBTITLE

T-SET

appears on the screen. If the “ANGLE

ICON” setting is “OFF” in the Display

menu, the (

) icon will not appear.

PLAY

(Refer to pages 20-21.)

OFF

V.SURR.

PLAY

1 / 8

Notes

¡If your language is not shown after

pressing the AUDIO or SUBTITLE/T-

SET button several times, the disc

may not have that language. However,

some discs allow audio language or

subtitle language setting on the disc

menu. (Operation varies depending

on the discs, so refer to the manual

along with the disc.)

¡When “NOT AVAILABLE” appears on

the TV screen, it means no subtitle is

recorded on the scene.

¡If you choose a language that has a 3

letter language code, the code will be

displayed every time you change the

subtitle language setting. If you choose

any other languages, ‘---’ will be dis-

played instead. (Refer to page 24.)

ANGLE

V.SURR.

Black Level Setting

DVD

1: Natural effect

2: Emphasized effect

OFF: No effects (original sound)

DVD-V

Adjust the Black Level Setting to make

the dark areas of the TV picture brighter.

RETURN

PLAY

Note (for CD play back only)

¡Virtual Surround will not be effective if

the sound mode is set to something

other than STEREO and will not work

when using the digital audio output.

MODE

ENTER

OFF

ON: Makes the dark areas brighter.

OFF: Shows the original picture as recorded.

RETURN

–

Download from Www.Somanuals.com. All Manuals Search And Download.

DVD

DVD Set Up

QUICK SETUP Menu

You can select the “PLAYER MENU”, “TV ASPECT”, or “DOLBY DIGITAL” from the QUICK SETUP menu quickly.

SETUP

STOP

Select the desired item

Confirm that QUICK is selected

ENTER

SETUP

QUICK

ENGLISH

SETUP

P20

P21

(Step 5)

PLAYER MENU

TV ASPECT

QUICK

CUSTOM

INITIALIZE

4:3 LETTER BOX

DOLBY DIGITAL

ENTER

•Refer to the sections “PLAYER

MENU”, “TV ASPECT”, or “DOLBY

DIGITAL” section on page 20 or 21.

CUSTOM Menu

You can change the DVD player’s settings.

ENTER

SETUP

STOP

to decide

Select CUSTOM

To select the desired item

ENTER

SETUP

CUSTOM

SETUP

LANGUAGE

DISPLAY

AUDIO

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

PARENTAL

LANGUAGE menu

DISPLAY menu

AUDIO menu

PARENTAL menu

SETUP

LANGUAGE

SETUP

DISPLAY

SETUP

AUDIO

SETUP

PARENTAL

PASSWORD

AUDIO

ORIGINAL

OFF

ENGLISH

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

DRC

Please enter a 4-digit password.

SUBTITLE

DISC MENU

PLAYER MENU

DOWN SAMPLING ON

DOLBY DIGITAL ON

AUTO POWER OFF ON

page 20

page 21

page 22

LANGUAGE Setting

Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired language

Select the desired item

To exit the menu

ENTER

SETUP

ENTER

AUDIO ∗1 ∗2

(Default: ORIGINAL)

Sets the audio language.

AUDIO

Hint

ORIGINAL

ENGLISH

FRENCH

∗1

• Language options are not available with

some discs.

• If OTHER is selected on the AUDIO, SUBTI-

TLE or DISC MENU screen, press four-digit

number to enter the code for the desired lan-

guage. (Refer to the language code list on

page 24.)

• Only the languages supported by the disc

can be selected.

∗2

LANGUAGE menu

SUBTITLE: ∗1 ∗2

(Default: OFF)

Sets the subtitle language.

SUBTITLE

OFF

ENGLISH

FRENCH

SETUP

LANGUAGE

AUDIO

ORIGINAL

SUBTITLE

DISC MENU

PLAYER MENU

OFF

ENGLISH

DISC MENU: ∗1

(Default: ENGLISH)

Sets the language for DVD

menu.

DISC MENU

ENGLISH

FRENCH

SPANISH

• Language Setting for Audio and Subtitle is

not available with some discs. Then use the

AUDIO and the SUBTITLE/T-SET button.

Details are on page 19.

PLAYER MENU

ENGLISH

FRANÇAIS

ESPAÑOL

QUICK

PLAYER MENU:

(Default: ENGLISH)

Sets the language for the

On-screen display.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

TV Display Selection

You can change the display functions. Follow the step 1) to 3) in the “CUSTOM Menu” section on page 20.

Select the desired item

6 To exit the menu

SETUP

QUICK

TV ASPECT:

(Default: 4:3 LETTER BOX)

See Hint to the right.

Select the

desired

setting

ENTER

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

4:3 LETTER BOX

4:3 PAN & SCAN

16:9 WIDE

AUTO POWER OFF ON

DISPLAY menu

ENTER

Hint

SETUP

DISPLAY

STILL MODE:

(Default: AUTO)

See Hint to the right.

TV ASPECT:

Select the

desired

setting

• Select “4:3 LETTER BOX”,

so that black bars appear on

the top and bottom of the

screen.

• Select “4:3 PAN & SCAN” for

a full height picture with

both sides trimmed.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTER BOX

AUTO

ENTER

AUTO POWER OFF ON

STILL MODE

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

FIELD

FRAME

AUTO

AUTO POWER OFF ON

ENTER

• Select “16:9 WIDE” if a

wide-screen TV is connect-

ed to this unit.

ANGLE ICON:

(Default: ON)

Set to “ON” to show the angle icon when multiple camera

angles are available during DVD playback.

STILL MODE:

• Select “AUTO”.

If your TV picture is not

clear, review 2 options

below.

4:3 LETTERBOX

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

OFF

AUTO POWER OFF ON

• If you select “FIELD”, the

picture in the still mode will

be stabilized.

• If you select “FRAME”, the

picture in the still mode will

be highly defined.

ENTER

AUTO POWER OFF:

(Default: ON)

Set to “ON” to turn this unit off automatically after

35 minutes of no use.

TV ASPECT

STILL MODE

ANGLE ICON

4:3 LETTERBOX

AUTO

4:3 LETTERBOX

AUTO

AUTO POWER OFF ON

OFF

ENTER

AUDIO Setting

Choose the appropriate audio settings for your equipment. It only affects during the playback of DVD discs. Follow the step 1)

to 3) in the “CUSTOM Menu” section on page 20.

6 To exit the menu

Select the desired item

SETUP

DRC (Dynamic Range Control):

(Default: ON)

Set to “ON” to compress the range between soft and loud sounds.

DRC

OFF

DOWN SAMPLING ON

DOLBY DIGITAL

ENTER

Hint

AUDIO menu

DRC:

DOWN SAMPLING:

(Default: ON)

Set to “ON” when outputting in 48 kHz.

SETUP

AUDIO

• This function is available

only on the discs which are

recorded in the Dolby Digital

format.

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

Set to “OFF” when outputting the original sound.

DOWN SAMPLING:

DRC

OFF

• When playing disc with

sound will be down sampled

at 48kHz, even if you set to

OFF.

DOWN SAMPLING ON

DOLBY DIGITAL

ENTER

• This function is available

only on digital output of a

disc recorded in 96kHz.

QUICK

DOLBY DIGITAL:

(Default: ON)

Set to “ON” when the unit is connected to a Dolby Digital receiver.

• ON: Outputs a Dolby Digital Signals

• OFF: Convert the Dolby Digital into PCM (2 channel)

DRC

DOWN SAMPLING ON

DOLBY DIGITAL ON

OFF

ENTER

–

Download from Www.Somanuals.com. All Manuals Search And Download.

PARENTAL Setting

Parental Control limits the disc viewing that exceed your settings. (an incorrect password will not play.)

This feature prevents your children from viewing inappropriate materials.

Parental Levels

Parental Level allows you to set the rating levels of your DVD discs. Playback will stop if the ratings exceed the levels you set.

Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Enter your desired four-

digit password (except

for 4737)

Select “PARENTAL

LEVEL”

Select the

desired levels

SETUP

ENTER

PARENTAL LEVEL

ALL

PARENTAL LEVEL

CHANGE

ALL

7 [NC-17]

6 [R]

PARENTAL menu

SETUP

PARENTAL

PASSWORD

Please enter a 4-digit password.

Hint

CONTROL LEVELS

• ALL:

• Levels 8:

All parental locks are cancelled.

DVD softwares of any grades (adult/general/children)

can be played back.

Only DVD softwares intended for general use and chil-

dren can be played back.

Only DVD softwares intended for children can be played

back, with those intended for adult and general use pro-

hibited.

If you have set a password already,

enter the current four-digit

password.

• Levels 7 to 2:

• Level 1:

SETUP

PARENTAL

PASSWORD

Enter current password.

To Change the Password for Parental Controls

You can change your password for parental controls. Follow the steps 1) to 3) in the “CUSTOM Menu” section on page 20.

To exit

the menu

Select “CHANGE”

Enter your new

four-digit password

(except for 4737)

Enter your desired four-

digit password (except

for 4737)

SETUP

ENTER

PARENTAL LEVEL

CHANGE

ALL

Hint

• Record the password in

case you forget it.

SETUP

PASSWORD

Please enter a 4-digit password.

PARENTAL

PARENTAL menu

SETUP

PARENTAL

• If you forget the password,

press 4, 7, 3, 7 at step 4,

then enter your new pass-

word.

PASSWORD

Enter current password.

• Password will be cleared

and parental levels will be

set to ALL.

To return the All Selections of SET UP (except for PARENTAL) to the Default Setting

To exit

the menu

SETUP

STOP

SETUP

ENTER

Select “YES”

Select INITIALIZE

(twice)

SETUP

INITIALIZE

SETUP

Hint

• When you cancel

to initialize at step

3,select “NO”.

SETUP

Initialize?

YES

QUICK

CUSTOM

INITIALIZE

QUICK

CUSTOM

INITIALIZE

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Information

Troubleshooting Guide

If this unit does not perform properly when operated as instructed in this Owner's Manual, check this unit consulting the follow-

ing checklist.

PROBLEM

No power.

CORRECTIVE ACTION

• Make sure the power plug is connected to an AC outlet.

• Make sure the power is turned on.

This unit does not respond to • Check if the power plug is connected to an AC outlet.

the remote control.

• Check the batteries in the remote control.

• Aim the remote control directly at the remote sensor. If necessary, remove all the

obstacles between the sensor and the remote.

• You have to be within 23 feet of this unit.

• Check if the right mode is selected. If it’s not in the right mode, press the DVD or

VCR buttons, whichever you need, on the remote control.

• Check if a cassette tape is in this unit.

• Tune your radio to an empty AM station so that you hear a lot of noises. Turn the vol-

ume up, then. If you hear some signal sound from the radio in response to your

pressing buttons on the remote, the remote control is working.

Timer recording is impossible. • Make sure the timer recording is set correctly.

• Make sure the

light appears on the DVD/VCR. If not, press the SUBTITLE/T-SET

button.

• Make sure the VCR clock is set correctly.

Cannot go into Record mode. • Make sure the tape has a safety tab. If needed, cover the hole with cellophane tape.

• Activate this unit in VCR mode. Press the VCR button on the remote control so that the

green VCR OUTPUT light is lit.

(

)

Playback picture is partially noisy. • Adjust tracking control for a better picture by pressing the CHANNEL

buttons

on the DVD/VCR or the SKIP/CH.(K/L) buttons on the remote control.

• Head cleaning may be necessary. Refer to “AUTO HEAD CLEANING” .

• Make sure the VCR is not in the Menu mode.

• Change the RF output channel to CH4. Then select the same channel on the TV.

• Fine tune your TV.

Cannot view a tape but the

audio is OK.

No, or poor, playback picture.

TV programs cannot be seen

normally.

• Re-check the ANT. IN and ANT. OUT connections. See pages 1 and 6.

• Press the VCR/TV button.

•

Press the VCR button on the remote control to activate it in the VCR mode. Check if the green

VCR OUTPUT light is lit. Then, set it to the TV position by pressing the VCR/TV button.

You cannot copy a copyrighted video tape. You are experiencing copy guard protection.

Video or color fades in and out when

making a copy of a video tape.

Cannot remove the tape.

• Check if this unit is in the VCR mode. If not, press the VCR button on the remote control

to switch the mode.

No picture.

• Connect the video cables firmly.

• Insert a correct video disc that plays on this unit.

• Press the DVD button on the remote control. Check if the DVD OUTPUT light is lit. Then

try other DVD features.

• Insert the disc.

• Clean the disc.

Disc cannot be played

• Place the disc correctly with the label side up.

• Cancel the parental lock or change the control levels.

• Handle a disc with special care so that it does not have fingerprints, scratches, or

dust on its surface.

• Connect the audio cables firmly.

• Turn the power of the audio component on.

• Correct the audio output settings.

No sound

• Correct the input settings on the audio component.

• This unit does not support DTS audio. This is not a malfunction.

• Connect this unit directly to the TV.

No DTS audio is output

Distorted picture

•

There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.

• Although pictures may stop for a moment, this is not a malfunction.

• The selected language is not available for audio or subtitles on the DVD.

This is not a malfunction.

• The DVD does not contain sequences recorded from different camera angles.

This is not a malfunction.

Audio or subtitle language

does not match the set up.

The camera angle cannot be

changed.

Audio or subtitle language

cannot be changed.

• The DVD does not contain audio source or subtitles in the selected language.

This is not a malfunction.

“Prohibited icon” appears on the • That operation is prohibited by this unit or the disc.

screen, prohibiting an operation This is not a malfunction.

•

Some functions are not available in specific modes, but this is not a malfunction. Read the description in this Owner’s Manual

for details on correct operations.

•

Playback from a desired track and random playback are not available during program playback.

Some functions are prohibited on some discs.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

• Designs and specifications are subject

to change without notice.

• If there is a discrepancy between lan-

guages, the default language will be

English.

Video Heads :

Operating temperature :

41°F (5°C) to 104°F (40°C)

Dimensions :

W : 17 3/16”(435mm)

H : 3 3/4” (94mm)

D : 9 3/16” (233mm)

Weight :

Four Heads

Output signal format :

NTSC color

Power source :

120 V AC +/- 10%, 60 Hz +/- 0.5%

Power consumption :

21 W (standby: 3.6W)

Approx 6lbs (2.7kg)

Language List

Language

Code

Language

French [FRE]

Frisian

Galician

Georgian

German [GER]

Greek [GRE]

Greenlandic

Guarani

Gujarati

Hausa

Hebrew

Hindi

Hungarian [HUN]

I-K

Icelandic [ICE]

Indonesian

Interlingua

Interlingue

Inupiak

Irish [IRI]

Italian [ITA]

Japanese [JPN]

Javanese

Kannada

Kashmiri

Kazakh

Kinyarwanda

Kirghiz

Kirundi

Code

Language

Macedonian

Malagasy

Malay

Code

Language

Siswat

Slovak

Slovenian

Somali

Code

A-B

5264

5271

5358

5747

5051

5158

5758

5360

5367

5447

5569

5455

5467

5957

5953

5965

5958

5966

5955

5964

5961

5960

6047

6051

6061

6565

6557

6558

6561

5165

6567

6569

6568

Abkhazian

Afar

Afrikaans

Albanian

Amharic

Arabic

Armenian

Assamese

Aymara

Azerbaijani

Bashkir

Basque

4748

4747

4752

6563

4759

4764

5471

4765

4771

4772

4847

5167

4860

5072

4854

4855

4864

4853

5971

4851

Malayalam

Maltese

Maori

Spanish [SPA]

Sundanese

Swahili

Marathi

Moldavian

Mongolian

Nauru

Swedish [SWE]

Tagalog

Tajik

Tamil

Tatar

Telugu

Thai

Tibetan

Tigrinya

Tonga

Tsonga

Turkish [TUR]

Turkmen

Twi

6658

6653

6647

6666

6651

6654

4861

6655

6661

6665

6664

6657

6669

Nepali

Norwegian [NOR]

O-R

Occitan

Bengali;Bangla

Bhutani

Bihari

6149

6164

6159

6247

6265

5247

6258

6266

6367

6459

6461

6467

5565

5560

5547

5551

5557

5347

5566

5647

5669

5760

5765

5757

6469

5771

6460

5761

5767

Oriya

Oromo(Afan)

Panjabi

Pashto;Pushto

Persian

Polish

Portuguese [POR]

Quechua

Rhaeto-Romance

Romanian [RUM]

Russian [RUS]

Samoan

Sangho

Sanskrit

Bislama

Breton

Bulgarian

Burmese

Byelorussian

C-E

Cambodian

Catalan

5759

4947

7254

4961

5464

4965

5047

6058

5160

5161

5166

U-Z

Ukrainian

Urdu

Uzbek

Vietnamese

Volapuk

Welsh

Wolof

Xhosa

Yiddish

Yoruba

Zulu

6757

6764

6772

6855

6861

4971

6961

7054

5655

7161

7267

Chinese [CHI]

Corsican

Croatian

6559

6553

6547

5350

6564

6554

6566

6660

6560

6550

6555

Czech

Danish [DAN]

Dutch [DUT]

English [ENG]

Esperanto

Estonian

Korean [KOR]

Kurdish

Scots Gaelic

Serbian

Serbo-Croatian

Sesotho

L-N

Laothian

Latin

Latvian;Lettish

Lingala

Lithuanian

5861

5847

5868

5860

5866

F-H

Setswana

Shona

Sindhi

Faroese

Fiji

Finnish [FIN]

5261

5256

5255

Singhalese

If you choose a Language that has a 3 letter language code, the code will be displayed every time you change the Audio or Subtitle language setting on page 19. If

you choose any other languages, ‘---’ will be displayed instead. (3 letter language code is written in bracket.)

Get it fixed, at your home or ours!

Your Home

For repair in your home-of all major brand appliances,

lawn and garden equipment, or heating and cooling systems,

LIMITED 90 DAY WARRANTY

no matter who made it, no matter who sold it!

If this (product) experiences any failure due to a defect in

material or workmanship within 90 days from the date of

purchase, return it to your nearest Sears store, and it will

be replaced free of charge.

For the replacement parts, accessories and

owner's manuals that you need to do-it-yourself.

For Sears professional installation of home appliances

and items like garage door openers and water heaters.

1-800-4-MY-HOME ^R(1-800-469-4663)

Call anytime, day or night (U.S.A. and Canada)

www.sears.com

www.sears.ca

This warranty applies only if this (product) is used for pri-

vate household purposes.

Our Home

For repair of carry-in items like vacuums, lawn equipment,

This warranty gives you specific legal rights, and you

may also have other rights which vary from state to

state.

and electronics, call or go on-line for the location of your nearest

Sears Parts & Repair Center.

1-800-488-1222

Call anytime, day or night (U.S.A. only)

www.sears.com

Sears, Roebuck and Co., D/817WA, Hoffman Estates,

IL 60179

To purchase a protection agreement on a product serviced by Sears:

1-800-827-6655 (U.S.A.)

1-800-361-6665 (Canada)

Para pedir servicio de reparación

a domicilio, y para ordenar piezas:

Au Canada pour service en français:

1-800-LE-FOYER

1-888-SU-HOGAR

(1-800-533-6937)

(1-888-784-6427)

www.sears.ca

For the location of a Sears store in your area :

1-800-488-1222

Registered Trademark / ^TMTrademark / ^SMService Mark of Sears, Roebuck and Co.

Marca Registrada / ^TMMarca de Fábrica / ^SMMarca de Servicio de Sears, Roebuck and Co.

^MCMarque de commerce / ^MDMarque déposée de Sears, Roebuck and Co.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Conexiones

Activación de la unidad

por primera vez

Ajuste del reloj

VCR

Consulte la "Conexión básica del

televisor" en la página delantera

antes de utilizar esta unidad.

VCR

-MENU-

VCR

PROGRAMAR

AUTOREPETIR [OFF]

AJUSTE CANAL

B AJUSTE DE RELOJ

SELEC. IDIOMA

SALIDA DEL AUDIO

TV ESTEREO [ON]

SAP

Canal de salida RF

Si el canal 3 se está utilizando para

una transmisión.

1)Programe su televisor al canal 4.

2)Inserte una cinta pregrabada en esta

unidad.

3)Pulse el botón OUTPUT en el

DVD/VCR para que se encienda la

luz VCR OUTPUT.

Encienda el televisor y sin-

tonice al canal 3.

• Si el canal 3 se está utilizando para una trans-

misión, vea la sección "Canal de salida RF".

•

Si no se ha ajustado el reloj,

aparece la pantalla AJUSTE

DE RELOJ cuando pulse el

botón MENU. En este caso,

vaya al paso (2).

• Si aparecen ruidos en la pantalla del

televisor,pulse el botón VCR/TV en

el mando a distancia.

4)Pulse una vez el botón PLAY.

5)Después de unos segundos, pulse el

botón PLAY en el DVD/VCR durante

3 segundos.

• El canal de salida RF cambiará del

canal 3 al canal 4 y podrá ver una

imagen reproducida.

• Cuando no aparezca una imagen en

la pantalla del televisor, repita el

paso (4).

POWER

Mando a distancia

Pantalla del televisor

SELEC. IDIOMA

ENGLISH

AJUSTE DE RELOJ

MES

0 3

DIA

– –

AÑO

– – – –

FRANCAIS

B ESPAÑOL

[ON]

HORA MINUTO AM/PM

– – – – – –

Seleccione el mes actual

AJUSTE DE RELOJ

MES

0 3

DIA

1 5

AÑO

– – – –

CA 01

6)Pulse el botón STOP para parar la

reproducción.

HORA MINUTO AM/PM

– – – – – –

AJUSTE AUTO

Instalación de las pilas

del mando a distancia

Seleccione el día actual

Conecta el cable de la caja de canales de cable o la

caja de satélite en la toma ANT IN de DVD/VCR?

AJUSTE DE RELOJ

MES

0 3

DIA

1 5

AÑO

2 0 0 4

HORA MINUTO AM/PM

– – – – – –

Pulse el botón

MENU para salir.

Seleccione el año actual

Conmutación VCR/DVD

No Espere unos minutos.

Después del escaneo

• El sintonizador se detiene en el canal

memorizado más abajo.

• Puede seleccionar sólo los canales memo-

rizados en esta unidad con los botones

CANAL.

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

OUTPUT

POWER

VCR

DVD

REW

REC/OTR

SKIP

STOP

PLAY

SKIP

CHANNEL

AJUSTE DE RELOJ

REV

FWD

SKIP/CH.

MES

0 3

DIA

AÑO

VCR/TV

SLOW

1 5 LUN 2 0 0 4

VCR

DVD

1 0

Botón VCR

Botón DVD

DISPLAY

PAUSE

HORA MINUTO AM/PM

0 5 – – – –

OUTPUT

PLAY

STOP

VCR

DVD

REC/OTR

Seleccione la hora actual

ENTER

Luz

DVD OUTPUT

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

V.SURR.

ANGLE

SUBTITLE

-SET

REPEAT

A-B

Botón OUTPUT

AJUSTE DE RELOJ

Luz

VCR OUTPUT

MES

0 3

DIA

AÑO

1 5 LUN 2 0 0 4

HORA MINUTO AM/PM

0 5 4 0 – –

MODO VCR

Seleccione los minutos actuales

AJUSTE DE RELOJ

Pulse el botón VCR en el mando a dis-

tancia.

(Compruebe que está encendida la luz

VCR OUTPUT.)

MODO DVD

Pulse el botón DVD en el mando a dis-

tancia

(Compruebe que está encendida la luz

DVD OUTPUT.)

MES

0 3

DIA

AÑO

1 5 LUN 2 0 0 4

HORA MINUTO AM/PM

0 5

4 0

P M AM

B PM

Seleccione "AM" o "PM".

Nota

• Si pulsa sólo el botón OUTPUT en el

panel frontal NO conmuta el modo del

mando a distancia. DEBE seleccionar

también el modo correcto en el

mando a distancia.

Para salir de la pantalla AJUSTE DE

RELOJ.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Español

Reproducción de la grabadora de vídeo

Reproducción de DVD/CD

Antes: Encienda el televisor y cambie al canal 3.

• Si el canal 3 se está utilizando para una transmisión, vea la

sección "Canal de salida RF".

Antes: Encienda el televisor, amplificador y otros equipos que puedan estar

conectados a esta unidad. Asegúrese que el televisor y el sintoamplificador de

audio (de venta en los comercios) están en el canal correcto.

DVD

VCR

DVD-V

OPEN/CLOSE

/EJECT

OPEN/CLOSE

/EJECT

POWER

Mando a distancia

Pantalla del televisor

SPEED

AUDIO

SPEED

AUDIO

OPEN/CLOSE

/EJECT

POWER

REPRODUCIR

SKIP/CH.

PLAY

VCR/TV

SLOW

VCR/TV

SLOW

Mando a distancia

Pantalla del televisor

VCR

+1 0

DVD

VCR

+1 0

DVD

DISPLAY

PAUSE

DISPLAY

PAUSE

STOP

PLAY

OPEN/CLOSE

/EJECT

PLAY

STOP

PARAR

EXPULSAR

STOP

REC/OTR

OPEN/CLOSE

/EJECT

Mando a distancia

Modo DVD

Modo de grabadora de vídeo

Disco/cinta

₍B_Oo_rdt_eó_nn_alfabético)

DVD-V

CD MP3

VCR

•Para seleccionar el canal.

•El botón +10 no tiene efecto

en el modo de grabadora de

vídeo.

•

Para seleccionar directamente

el capítulo o el título.

•

Para seleccionar directamente

la canción.

+1 0

•

Para buscar en avance/retroceso

en un disco.

Para empezar la reproducción en avance/

retroceso lento durante el modo de pausa.

•Para buscar en avance/

retroceso en un disco.

•Para el avance/retroceso

de una cinta.

•

Para seleccionar un ítem

en el menú de la grabadora

de vídeo.

Para avanzar al siguiente

menú de la grabadora de

vídeo.

Para volver un paso

durante el ajuste del reloj y

temporizador.

ENTER

•Para mover el cursor y

determinar su posición.

•Para mover el curso y

determinar su posición.

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

A-B

•Para repetir entre los puntos

A y B elegidos

•

Para repetir entre los puntos A

y B elegidos (disco compacto)

SKIP/CH.

ANGLE

AUDIO

•Para seleccionar los ángulos

de la cámara en un disco.

VCR/TV

SLOW

•Para seleccionar el idioma de •Para seleccionar ESTÉREO,

audio en un disco.

L-CH o R-CH (disco compacto)

•Para borrar los marcadores.

CLEAR/

C. RESET

(Disco compacto)

•Para salir del menú de la

grabadora de vídeo.

•Para reponer el contador de

cinta.

VCR

+1 0

DVD

•Para borrar los marcadores.

•Para borrar los números

entrados incorrectamente.

•Para retirar el Nº de estado

en la entrada de programa.

•Para borrar los números

entrados incorrectamente.

DISPLAY

PAUSE

DISPLAY

DVD

•Para indicar el modo de

disco actual.

•Para indicar el modo de

disco actual.

•Para indicar la hora actual,

contador de cinta y canal.

PLAY

• Para seleccionar el modo

de salida de DVD.

• Para seleccionar el modo de

salida de DVD

STOP

• Para activar el mando a

distancia en el modo DVD.

•Para llamar el menu en un

•

Para activar el mando a

distancia en el modo DVD

REC/OTR

MODE

•Para llamar el menú MP3

(MP3)

•Para llamar el menú de la

grabadora de vídeo.

disco.

ENTER

•Para disponer el orden de

reproducción o la

reproducción aleatoria.

•Para activar/desactivar el

nivel del negro.

SETUP TOP MENU

RETURN

MODE

CLEAR/

MODE

V.SURR.

ANGLE

C. RESET

OPEN/CLOSE

/EJECT

•Para abrir o cerrar la bandeja •Para abrir o cerrar la bandeja •Para expulsar el videocasete

del disco.

de la grabadora de vídeo.

SUBTITLE

T-SET

REPEAT

A-B

•

Para hacer una pausa de la

reproducción o grabación de la cinta.

Para avanzar la reproducción

un cuadro a la vez.

•Para hacer una pausa de

reproducción del disco.

•Para avanzar la reproducción

un cuadro a la vez.

PAUSE

• Para hacer una pausa en la

reproducción del disco.

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

del disco.

•

Para empezar la reproducción

de la cinta.

PLAY

POWER

•Para activar o desactivar la

unidad.

•Para activar o desactivar la

unidad.

•Para activar o desactivar la

unidad.

REC/OTR

REPEAT

• Para empezar una grabaciòn.

•Para reproducir repetidamente una

Para reproducir repetidamente canción o disco (Disco compacto)

•

un capítulo o título.

•

Para reproducir repetidamente una

canción, grupo o disco (MP3).

•Para volver a la operación

RETURN

•Para volver a la operación

previa en el menú de

programación de DVD.

previa en el menú de

programación de DVD.

Para buscar una canción.

•

Para buscar un capítulo, título u hora.

Para volver rápidamente a un

lugar o disco.

Para buscar la hora (Disco compacto)

MODE

•Para llamar el menú de

búsqueda de índice u hora.

Para volver rápidamente a un lugar

o disco.

•

Buscar los marcadores.

•

•Para llamar el menú de

Buscar los marcadores. (Disco compacto)

SETUP

•Para llamar el menú de

programación de DVD.

SKIP/CH.

•

Para cambiar de canal.

Para ajustar manualmente el

seguimiento durante la reproducción.

•

• Para saltar capítulos

• Para saltar canciones.

SLOW

• Para ver la cinta en cámara

lenta.

SPEED

STOP

•Para seleccionar la velocidad

de grabación.

• Para parar la reproducción o

grabación.

• Para parar la grabación.

SUBTITLE

T-SET

•

Para poner la grabadora de

vídeo en el modo de espera

para una grabación con temporizador.

•Para seleccionar subtítulos

en un disco.

•

Para volver al archivo superior

de la jerarquía más alta en el

programa y menú MP3. (MP3)

TOP MENU

VCR

•Para llamar el menú superior

en un disco.

•

Para seleccionar el modo de

salida de la grabadora de vídeo.

Para activar el mando a distancia

en el modo de la grabadora de vídeo.

VCR/TV

V.SURR.

•

Para seleccionar la posición

de DVD o posición del televisor.

Para seleccionar la posición de

CD/MP3 o la posición del televisor.

•

Para seleccionar la posición de la

grabadora de vídeo o posición del televisor.

•Para activar/desactivar el

envolvente virtual.

•Para activar/desactivar el

envolvente virtual.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

Connections

Turn on the unit for the

Clock Set Up

first time

VCR

Please refer to “Basic TV

Connection” on the front page

before you use this unit.

VCR

-MENU-

VCR

TIMER PROGRAMMING

AUTO REPEAT [OFF]

CHANNEL SET UP

B CLOCK SET

LANGUAGE SELECT

AUDIO OUT

TV STEREO

SAP

RF Output Channel

If there is a TV station broadcasting

on channel 3,

1)Set your TV to channel 4.

2)Insert a pre-recorded tape into this

unit.

3)Press the OUTPUT button on the

DVD/VCR so that the VCR OUTPUT

light is lit.

Turn on the TV and set it

to channel 3.

[ON]

• If channel 3 is already occupied for broadcasting,

see“RF Output Channel” section.

• Select CLOCK SET when

you press the MENU but-

ton. Go to step [2].

• If noise appears on the TV screen,

press the VCR/TV button on the

remote control.

4)Press the PLAY button once.

5)After a few seconds, press the PLAY

button on the DVD/VCR for 3 sec-

onds.

• The RF output channel will change

to channel 4 from channel 3 and you

will see a playback picture.

• When a picture does not appear on

the TV screen, repeat step [4].

6)Press the STOP button to stop play-

back.

POWER

Remote Control TV Screen

LANGUAGE SELECT

CLOCK SET

B ENGLISH

FRANCAIS

ESPAÑOL

[ON]

MONTH DAY

0 3 – –

YEAR

– – – –

HOUR MINUTE AM/PM

– – – – – –

Select the current month

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

CH 01

– – – –

HOUR MINUTE AM/PM

– – – – – –

Installing the Batteries

for the Remote Control

AUTO SET UP

Select the current day

Do you connect the cable from the cable box or

the satellite box to the DVD/VCR’s ANT IN jack?

YES

CLOCK SET

MONTH DAY

0 3 1 5

YEAR

2 0 0 4

HOUR MINUTE AM/PM

– – – – – –

Yes Press the MENU

VCR/DVD Selection

button to exit

Select the current year

OPEN/CLOSE

/EJECT

POWER

SPEED

AUDIO

OUTPUT

POWER

VCR

DVD

REW

REC/OTR

SKIP

STOP

PLAY

SKIP

CHANNEL

No Please wait for a few minutes.

After TV station scanning...

REV

FWD

SKIP/CH.

CLOCK SET

VCR/TV

SLOW

MONTH DAY

YEAR

VCR

DVD

1 0

VCR button

DVD button

• The tuner stops on the lowest memorized

DISPLAY

PAUSE

0 3 1 5 MON 2 0 0 4

channel.

OUTPUT

PLAY

STOP

HOUR MINUTE AM/PM

0 5 – – – –

• You can select only the channels memo-

rized in this unit by using the CHANNEL

buttons.

VCR

DVD

REC/OTR

DVD OUTPUT

light

ENTER

Select the current hour

SETUP TOP MENU

RETURN

MODE

CLEAR/

C. RESET

MODE

V. SURR.

ANGLE

SUBTITLE

OUTPUT button

-SET

REPEAT

A-B

VCR OUTPUT

light

CLOCK SET

MONTH DAY

YEAR

0 3 1 5 MON 2 0 0 4

VCR MODE

HOUR MINUTE AM/PM

0 5 4 0 – –

Press the VCR button on the remote

Select the current minute

CLOCK SET

control.

(Verify that the VCR OUTPUT light is lit.)

DVD MODE

Press the DVD button on the remote

control.

MONTH DAY

YEAR

0 3 1 5 MON 2 0 0 4

(Verify that the DVD OUTPUT light is lit.)

HOUR MINUTE AM/PM

0 5

4 0

P M AM

B PM

Note

Select “AM” or “PM”

• Pressing only the OUTPUT button on

the front panel DOES NOT switch the

mode of the remote control. You

MUST select the correct mode on the

remote control.

To exit the CLOCK SET

screen.

–

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Use Guide

VCR Playback

DVD/CD Playback

Before: Turn on the TV and set it to channel 3.

• If channel 3 is already occupied for broadcasting,

see “RF Output Channel” section.

Before: Turn on the TV, amplifier and any other components

which are connected to this unit. Make sure the TV and audio

receiver are set to the correct channel or input.

DVD

VCR

DVD-V

OPEN/CLOSE

/EJECT

OPEN/CLOSE

/EJECT

POWER

Remote Control TV Screen

SPEED

AUDIO

SPEED

AUDIO

OPEN/CLOSE

/EJECT

POWER

PLAYB

SKIP/CH.

PLAY

VCR/TV

SLOW

VCR/TV

SLOW

Remote Control TV Screen

VCR

+1 0

DVD

VCR

+1 0

DVD

DISPLAY

PAUSE

DISPLAY

PAUSE

STOP

PLAY

OPEN/CLOSE

/EJECT

PLAY

STOP

EJECT

STOP

REC/OTR

OPEN/CLOSE

/EJECT

Remote Control

VCR mode

VCR

DVD mode

Disc/Tape

₍B_Au_lpt_ht_ao_bn_{etical order)}

DVD-V

MP3

•To select channel.

•The +10 button has no effect

in VCR mode.

•

To select chapter or title directly. •To select track directly.

+1 0

•To search forward/backward

through a disc.

To begin slow forward/reverse

playback during the pause mode.

•To search forward/backward

through a disc.

•To forward/backward a tape.

•

• To select an item

on the VCR Menu.

• To advance to the next

VCR Menu.

ENTER

•To move the cursor and

determine its position.

•To move the cursor and

determine its position.

OPEN/CLOSE

/EJECT

POWER

•

To go back one step during

SPEED

AUDIO

clock and timer setting.

A-B

•To repeat between your

chosen point A and B.

•To repeat between your

chosen point A and B. (CD)

ANGLE

AUDIO

•To select camera angles on

a disc.

SKIP/CH.

•To select audio languages on •To select STEREO,

a disc.

VCR/TV

SLOW

L-CH or R-CH. (CD)

•To clear the markers. (CD)

•To remove status No.

in program input.

•To clear the numbers

entered incorrectly.

CLEAR/

C. RESET

•To clear the markers.

•To clear the numbers

entered incorrectly.

•To exit the VCR Menu.

•To reset the tape counter.

VCR

+1 0

DVD

DISPLAY

PAUSE

DISPLAY

DVD

•To display the current disc

mode.

•To display the current disc

mode.

•To display the current time,

tape counter, and channel.

• To select the DVD output

mode.

• To select the DVD output

mode.

• To activate the remote control • To activate the remote control

in DVD mode.

PLAY

STOP

in DVD mode.

MODE

REC/OTR

•To call up the Menu

on a disc.

•To call up the MP3 menu.

(MP3)

•To call up the VCR Menu.

ENTER

•To arrange the playing

order or play randomly.

•To set black level on/off.

OPEN/CLOSE

/EJECT

SETUP TOP MENU

RETURN

•To open or close the disc

tray.

•To open or close the disc

tray.

•To eject the video cassette

from the VCR.

MODE

CLEAR/

C. RESET

MODE

V.SURR.

ANGLE

• To pause tape playback or

recording.

•To advance playback

one frame at a time.

PAUSE

•To pause disc playback.

•To advance playback

one frame at a time.

SUBTITLE

T-SET

• To pause disc playback.

REPEAT

A-B

• To begin disc playback.

• To begin tape playback.

•To turn the unit on or off.

• To start a recording.

PLAY

POWER

•To turn the unit on or off.

REC/OTR

REPEAT

•To play a track or disc

repeatedly. (CD)

•To play a track, group or disc

repeatedly. (MP3)

•To play a chapter or title

repeatedly.

RETURN

•To return to the previous

operation on the DVD setup

menu.

•To return to the previous

operation on the DVD setup

menu.

•To search track.

•

To search chapter, title or time.

•To rapidly return to

MODE

•To search time. (CD)

•To rapidly return to

a location of disc.

•To call up the index or time

search menu.

a location of disc.

•Search the markers.

•Search the markers. (CD)

SETUP

•To call up the DVD setup

menu.

•To call up the DVD setup

menu.

SKIP/CH.

• To change channels.

•

To adjust the tracking manually

during playback.

• To skip chapters.

• To skip tracks.

SLOW

• To view the tape

in slow motion.

SPEED

STOP

•To select the recording speed.

• To stop playback.

• To stop playback or recording.

SUBTITLE

T-SET

•To put the VCR into standby

mode for a timer recording.

•To select subtitles on a disc.

•

To return to the top file of the

highest hierarchy in the program

and MP3 menu. (MP3)

TOP MENU

VCR

•To call up the Top Menu

on a disc.

• To select the VCR output

mode.

• To activate the remote control

in VCR mode.

VCR/TV

V.SURR.

• To select DVD position or

TV position.

• To select CD/MP3 position

or TV position.

• To select VCR position or

TV position.

•To set virtual surround on/off. •To set virtual surround on/off.

Download from Www.Somanuals.com. All Manuals Search And Download.

0VMN04014 / H9602UD ★★★★★

Printed in China

Sennheiser Satellite Radio SER 1 3 User Manual
Snell Acoustics Speaker AMC Sub 88 User Manual
Sony Camcorder Accessories HVR MRC1 User Manual
Sony Printer UP 610 User Manual
SpectronIQ Home Theater System PHT 300X User Manual
SRS Labs Speaker System CSD 07D User Manual
State Industries Water Heater Collins User Manual
Sunfire Power Supply 200 seven User Manual
Sunrise Medical Patio Furniture 4 Extender User Manual
Tandy Portable Radio 120 2157 User Manual