Sylvania DVD Player DV220SL8 A User Manual

Owner’s Manual  
Please read before using this unit.  
DVD/CD Player with Video Cassette Recorder  
INSTRUCCIONES EN  
ESPAÑOL INCLUIDAS.  
DV220SL8 A  
Supplied Accessories  
remote control unit  
(NB606UD /  
NB656UD)  
RCA audio/video cables  
(WPZ0102TM018 /  
WPZ0102LTE01)  
If you need additional operating assistance after  
reading this owner’s manual, please call  
Owner’s Manual  
batteries  
(AA × 2)  
owner’ manual  
(1VMN28434)  
TOLL FREE : 1-800-968-3429  
or visit our web site at  
Contents  
PRECAUTIONS  
DVD FUNCTIONS  
Safety Instructions...................................................................................2  
Symbols Used in This Manual..............................................................................4  
Maintenance ..............................................................................................................4  
Playback .................................................................................................15  
MP3 Playback .........................................................................................16  
On-Screen Display ..................................................................................16  
About Cassette Tapes and Discs .............................................................5  
Playable Media..........................................................................................................5  
Unplayable Discs ......................................................................................................5  
Search Functions ....................................................................................17  
Using Track Search..................................................................................................17  
Using Title / Chapter Search................................................................................17  
Using Time Search ..................................................................................................17  
Marker Setting..........................................................................................................17  
Repeat / Random / Programmed Playback ...........................................18  
Repeat Playback.......................................................................................................18  
Repeat A-B Playback ..............................................................................................18  
Random Playback....................................................................................................18  
Programmed Playback..........................................................................................18  
Special Settings ......................................................................................19  
Subtitle Language...................................................................................................19  
Audio Language ......................................................................................................19  
Camera Angles .........................................................................................................19  
Black Level Setting..................................................................................................19  
Stereo Sound Mode................................................................................................19  
Virtual Surround.......................................................................................................19  
DVD Setting ............................................................................................20  
LANGUAGE Setting.................................................................................................20  
DISPLAY Setting.......................................................................................................21  
AUDIO Setting ..........................................................................................................21  
PARENTAL Setting...................................................................................................22  
OTHERS Setting........................................................................................................22  
Reset to the Default Setting (Except for PARENTAL Setting)..................23  
SETUP  
Connections.............................................................................................6  
Connection to a TV..................................................................................................6  
Connection to an Audio System.........................................................................7  
Connection to a Cable/Satellite Box .................................................................7  
Preparation for Use .................................................................................8  
Turning on Unit for the First Time .....................................................................8  
Clock Setting..............................................................................................................8  
Function Overview ..................................................................................9  
Front Panel Indicator Lights.................................................................................9  
Selecting DVD or VCR Operation........................................................................9  
Front & Rear Terminals...........................................................................................9  
Remote Control........................................................................................................10  
Installing the Batteries for the Remote Control...........................................10  
VCR FUNCTIONS  
Playback .................................................................................................11  
Other Operations....................................................................................11  
Index Search..............................................................................................................11  
Time Search...............................................................................................................11  
Auto Repeat...............................................................................................................12  
Recording................................................................................................12  
Recording & One-touch Timer Recording (OTR)..........................................12  
Timer Recording ......................................................................................................12  
Notes for Timer Recording & One-touch Timer Recording (OTR).........13  
Satellite Link..............................................................................................................14  
Copying a Cassette Tape......................................................................................14  
INFORMATION  
Troubleshooting Guide ..........................................................................23  
Specifications .........................................................................................24  
Language Code List ................................................................................24  
LIMITED WARRANTY...............................................................................24  
Español ...................................................................................................25  
Quick Use Guide......................................................................................27  
Basic TV Connection  
rear of TV  
AC  
outlets  
connect  
plug in  
1
2
DVD/VCR  
AUDIO OUT  
VCR  
AUDIO IN  
rear of the unit  
L
L
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD/VCR  
AUDIO OUT  
VCR  
AUDIO OUT  
VIDEO OUT  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO OUT  
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
PB  
/
/
R
R
COAXIAL  
VIDEO OUT  
R
from the unit  
from TV  
C
PR  
R
VIDEO OUT  
VIDEO IN  
Please refer to “Connectionson page 6.  
3
© 2009 Funai Electric Co., Ltd.  
E8E0AUD_DV220SL8A_EN_v1.indd  
1
2009/09/17 13:53:12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.  
WARNING: Batteries (Battery pack or battery installed) shall not be exposed to excessive heat such as sunshine, fire, or the like.  
LASER SAFETY  
This apparatus employs a laser. Only a qualified service person should remove the cover or attempt to service this  
apparatus, due to possible eye injury.  
CAUTION: Use of controls or adjustments or performance of procedures other than those specified herein may result  
in hazardous radiation exposure.  
CAUTION: Visible and invisible laser radiation when open and interlocks defeated. Do not stare into beam.  
LOCATION: Inside, near the deck mechanism.  
IMPORTANT COPYRIGHT INFORMATION  
Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product  
incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.  
Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and  
other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is  
prohibited.  
Do not place the unit on the furniture that is capable of being tilted by a child and an adult leaning, pulling, standing  
or climbing on it. A falling unit can cause serious injury or even death.  
To Avoid the Hazards of Electrical Shock and Fire  
• Do not handle the power cord with wet hands.  
• Do not pull on the power cord when disconnecting it from an AC outlet. Grasp it by the plug.  
• Do not put your fingers or objects into the unit.  
Location and Handling  
• Do not install the unit in direct sunlight, near strong magnetic fields, or in a place subject to dust or strong vibration.  
• Avoid a place with drastic temperature changes.  
• Install the unit in a horizontal and stable position. Do not place anything directly on top or bottom of the unit.  
Depending on your external devices, noise or disturbance of the picture and/or sound may be generated if the unit is  
placed too close to them. In this case, please ensure enough space between the external devices and the unit.  
• Depending on the environment, the temperature of this unit may increase slightly. This is not a malfunction.  
• Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.  
Dew Condensation Warning  
• Dew condensation may form inside the unit in the following conditions. If so, do not use this unit at least for a few  
hours until its inside gets dry.  
- The unit is moved from a cold place to a warm place.  
- Under conditions of high humidity.  
- After heating a cold room.  
Note about Recycling  
• This unit’s packaging materials are recyclable and can be reused. Please dispose of any materials in  
accordance with your local recycling regulations.  
• Batteries should never be thrown away or incinerated but disposed of in accordance with your local  
regulations concerning chemical wastes.  
Notice for Progressive Scan Output  
• Consumers should note that not all high definition television sets are fully compatible with this product and may  
cause artifacts to be displayed in the picture. In case of picture problems with 525(480) progressive scan output,  
it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions  
regarding your TV set compatibility with this 525p(480p) DVD player, please contact our customer service center.  
3
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
3
2009/09/17 13:53:16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Head Cleaning  
• Automatically cleans video heads as you insert or remove a  
cassette tape, so you can see a clear picture.  
• Playback picture may become blurred or interrupted while the  
TV program reception is clear. Dirt accumulated on the video  
heads after a long period of use, or the usage of rental or worn  
cassette tapes can cause this problem. If a streaky or snowy  
picture appears during playback, the video heads in your unit  
may need to be cleaned.  
Note to CATV system installer:  
• This reminder is provided to call the CATV system installer’s attention to  
Article 820-40 of the NEC that provides guidelines for proper grounding  
and, in particular, specifies that the cable ground should be connected  
to the grounding system of the building, as close to the point of cable  
entry as practical.  
Symbols Used in This Manual  
1. Please visit your local audio/video store and purchase a good  
quality VHS video head cleaner.  
The following symbols appear in some headings in this manual.  
2. If a Video head cleaner does not solve the problem, please call  
our toll free customer support line found on the cover of this  
manual to locate an authorized service center.  
: Description refers to video cassette tapes.  
:
Description refers to DVD-video.  
Note:  
: Description refers to audio CD.  
• Remember to read the instructions along with the video head cleaner  
before use.  
: Description refers to CD-RW/-R with MP3 files.  
• Clean video heads only when problems occur.  
Maintenance  
© 2009 Funai Electric Co., Ltd.  
All rights reserved. No part of this manual may be reproduced, copied,  
transmitted, disseminated, transcribed, downloaded or stored in any  
storage medium, in any form or for any purpose without the express prior  
written consent of Funai. Furthermore, any unauthorized commercial  
distribution of this manual or any revision hereto is strictly prohibited.  
Servicing  
• Please refer to relevant topics on the “Troubleshooting Guide”  
on page 23 before returning the product.  
• If this unit becomes inoperative, do not try to correct the  
problem by yourself. There are no user-serviceable parts inside.  
Turn off, unplug the power plug, and please call our toll free  
customer support line found on the cover of this manual to  
locate an authorized service center.  
Information in this document is subject to change without notice.  
Funai reserves the right to change the content herein without the  
obligation to notify any person or organization of such changes.  
with the  
design is a registered trademark of Funai  
Electric Co., Ltd and may not be used in any way without the express  
written consent of Funai. All other trademarks used herein remain  
the exclusive property of their respective owners. Nothing contained  
in this manual should be construed as granting, by implication or  
otherwise, any license or right to use any of the trademarks displayed  
herein. Misuse of any trademarks or any other content in this manual  
is strictly prohibited. Funai shall aggressively enforce its intellectual  
property rights to the fullest extent of the law.  
Cleaning the Cabinet  
• Wipe the front panel and other exterior surfaces of the unit with  
a soft cloth.  
• Never use a solvent, thinner, benzene or alcohol to clean the unit.  
Do not spray insecticide liquid near the unit. Such chemicals may  
discolor the surface or damage the unit.  
SYLVANIA is a registered trademark of OSRAM SYLVANIA Inc., used  
under license.  
Cleaning Discs  
• When a disc becomes dirty, clean it with a cleaning cloth. Wipe  
the disc from the center to out. Do not wipe in a circular motion.  
• Do not use solvents such as benzine, thinner, commercially  
available cleaners, detergent, abrasive cleaning agents or antistatic  
spray intended for analog records.  
Manufactured under license from  
Dolby Laboratories. “Dolby” and the  
double-D symbol are trademarks of Dolby  
Laboratories.  
Cleaning the Disc Lens  
• If this unit continues to perform improperly even after you have  
referred to the relevant sections and to the “Troubleshooting  
Guide” in this manual, the laser optical pickup unit may be dirty.  
Consult your dealer or an authorized service center for inspection  
and cleaning of the laser optical pickup unit.  
Disc Handling  
• When you handle a disc, hold it by its edge and try not to touch  
the surface of the disc.  
• Always store the disc in its protective case when not in use.  
4
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
4
2009/09/17 13:53:16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About Cassette Tapes and Discs  
Playable Media  
Type of  
media  
Recorded  
signals  
Mark (logo)  
Region code  
Media size  
Tape speed and disc types  
tape width  
1/2 inches  
(12.65 mm)  
cassette  
tape  
SP: 1-5/16 inch/sec. (33.40 mm/sec.)  
SLP: 7/16 inch/sec. (11.12 mm/sec.)  
analog video  
DVD-video  
*1, 2, 3, 5, 9  
or  
5 inches  
(12 cm)  
or  
3 inches  
(8 cm)  
DVD-RW  
DVD-R  
*1, 3, 4, 5, 6,  
8, 9, 10  
e.g.)  
title 1  
title 2  
digital video  
(MPEG2)  
chapter 1 chapter 2 chapter 3 chapter 4 chapter 1  
chapter 2  
DVD+RW  
DVD+R  
*1, 3, 4, 5, 7,  
8, 9, 10  
audio CD  
*3, 5, 9  
audio CD  
MP3  
e.g.)  
track 1  
track 2  
track 3  
track 4  
track 5  
track 6  
5 inches  
(12 cm)  
or  
3 inches  
(8 cm)  
digital audio  
or  
MP3  
CD-RW  
CD-R  
e.g.)  
folder 1  
folder 2  
*3, 4, 5, 8, 9  
file 1  
file 2  
file 3  
file 4  
file 5  
file 6  
is a trademark of DVD Format/Logo Licensing Corporation.  
If you cannot play back a disc which bears one of the marks above, check the following.  
*1: This unit conforms to the NTSC color system. Discs recorded in other color systems such as PAL cannot be played back.  
*2: Certain DVD-video does not operate as described in this manual due to the intentions of the disc’s producers.  
*3: Scratched or stained discs may not be played back.  
*4: Some discs cannot be played back because of incompatible recording conditions, characteristics of the recorder or special prop-  
erties of discs.  
*5: You can play back discs which bear the marks above. If you use nonstandardized discs, this unit may not play them back. Even if  
they are played back, the sound or video quality will be compromised.  
*6: You may play back the unfinalized DVD-RW/-R recorded in the video format on our brand’s DVD recorder. However, depending  
on the recording status of a disc, the disc may not be played back at all or normally (the picture or sound may not be smooth,  
etc.). In this case, you need to finalize the disc with the DVD recorder. Refer to the manual accompanying the DVD recorder.  
*7: Only discs recorded in the video format and finalized can be played back.  
Unfinalized discs cannot be played back. Depending on the recording status of a disc, the disc may not be played back at all (the  
picture or sound may not be smooth, etc.).  
*8: If the recorded portion of the disc is too small (less than 2-3/16 inches (55 mm) across), it may not play back properly.  
*9: Do not glue paper or put stickers on to the disc. These may damage the disc, and the unit may not read it correctly.  
*10: Discs recorded in the VR (video recording) format cannot be played back.  
Unplayable Discs  
NEVER play the following discs as malfunction may result!  
DVD-RAM, DVD-audio, CD-i, photo CD, video CD, DVD with region codes other than 1 or ALL, DTS-CD, DVD-ROM for personal computers,  
CD-ROM for personal computers  
On the following disc, the sound MAY NOT be heard.  
super audio CD  
Note:  
• Only the sound recorded on the normal CD layer can be delivered. The sound recorded on the high density super audio CD layer cannot be delivered.  
Any other discs without compatibility indications  
5
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
5
2009/09/17 13:53:18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SETUP  
Connections  
Connection to a TV  
Please refer to “Basic TV Connection” on the front page before you use this unit.  
VCR and Basic DVD Connection  
Available for DVD only  
DVD’s picture quality  
analog audio  
standard picture  
good picture  
better picture  
COMPONENT  
VIDEO IN  
Y
COMPONENT  
VIDEO IN  
Y
AUDIO IN  
TV  
S-VIDEO IN  
VIDEO IN  
L
R
C
B
PB  
or  
or  
or  
and  
A
U
D
I
O
I
N
L
C
R
PR  
R
V
I
D
E
O
I
N
RCA audio cable  
RCA video cable  
S-video cable  
component video cable  
This unit  
DVD/VCR  
AUDIO OUT  
VR  
DVD/VCR  
VCR  
DVD  
DVD  
AUDIO S-VIDEO  
OUT OUT  
DVD  
AUDIO  
OUT  
COMPONENT  
VIDEO OUT  
COMPONENT  
AUDIO S-VIDEO  
VIDEO OUT  
OUT  
OUT  
L
Y
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
AUDIO S-VIDEO  
VIDEO OUT  
OUT OUT  
DIGITAL  
AUDIO OUT  
L
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
PB  
/
R
COAXIAL  
VIDEO OUT  
R
C
/
/
PB  
B
C
PR  
/
R
VIDEO OUT  
R
C
PR  
R
or  
AUDIO OUT  
COMPONENT  
VIDEO OUT  
VIDEO OUT  
S-VIDEO OUT  
Supplied cables used in this connection are as follows:  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your local store.  
Note:  
• Connect this unit directly to your TV. If an RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system.  
• DIGITAL AUDIO OUT (COAXIAL), DVD AUDIO OUT, S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.  
If your TV is compatible with 525 (480) progressive scanning, and you want to enjoy that high quality picture for DVD playing;  
You must select the connection COMPONENT VIDEO OUT above and progressive scanning mode. To set the mode, set  
“PROGRESSIVE” to “ON” in “DISPLAY” menu, so that the PROGRESSIVE SCAN indicator on this unit lights up. Refer to pages 20-21 for  
more details.  
• When “PROGRESSIVE” is “ON”, video signals from the unit’s VIDEO OUT and S-VIDEO OUT jacks will be distorted or not be output at  
all for DVD playing. The picture will be OK for VCR use from the VIDEO OUT jack.  
If your TV is not compatible with progressive scanning;  
Use this unit in interlace mode and set “PROGRESSIVE” to “OFF” either in “DISPLAY” menu or by pressing and holding [PLAY B] on  
the front of the unit on the DVD side for more than 5 seconds, so that the PROGRESSIVE SCAN indicator on this unit turns off.  
After connecting to your TV:  
You will need to switch to video input on your TV. This is usually marked TV/VIDEO, INPUT or AUX.  
Please refer to your TV’s owner’s manual for details.  
Input modes for common TV brands:  
Listed below are inputs for common brand name TV’s.  
Admiral:  
Curtis Mathis:  
GE:  
AUX  
Panasonic:  
RCA:  
TV/VIDEO  
LINE1, LINE2, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
INPUT, TV/VCR, 00, 90, 91, 92, 93  
Samsung:  
Sanyo:  
TV/VIDEO  
Hitachi:  
INPUT, AUX  
VIDEO  
JVC:  
VIDEO, VIDEO1, VIDEO2, VIDEO3  
Sharp:  
Sony:  
Toshiba:  
Zenith:  
00  
Kenwood:  
LXI-Series:  
Magnavox:  
AUX  
00  
VIDEO1, VIDEO2, VIDEO3  
TV/GAME  
00  
AUX CHANNEL  
6
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
6
2009/09/17 13:53:20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connection to an Audio System  
Playing 2 Channel Analog Audio  
stereo system  
Playing Multi Channel Digital Audio  
Dolby Digital decoder,  
MD deck or DAT deck  
Audio  
L
R
analog audio  
input jacks  
COAXIAL  
digital audio  
input jack  
RCA audio cable  
digital audio coaxial cable  
DVD  
DVD/VCR  
AUDIO OUT  
CR  
DVD  
AUDIO  
OUT  
COMPONENT  
AUDIO S-VIDEO  
VIDEO OUT  
OUT OUT  
DIGITAL  
AUDIO OU
This unit  
L
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT  
OUT  
OUT  
L
Y
L
AUDIO IN  
VIDEO IN  
L
R
C
B
/
R
PB  
COAXIAL  
VIDEO OUT  
R
C
/
PR  
R
COAXIAL  
R
or  
AUDIO OUT  
DIGITAL AUDIO OUT  
SETUP > QUICK >  
DOLBY DIGITAL  
Setting  
Supplied cables used in this connection are as follows:  
Connection  
• RCA audio cable (L/R) x 1  
Please purchase the rest of the necessary cables at your  
local store.  
Connecting to a Dolby Digital decoder  
for Dolby Digital audio output.  
BITSTREAM  
Connecting to other device (an MD deck  
or DAT deck etc.) without Dolby Digital  
decoder.  
PCM  
* To complete these settings, refer to pages 20-21.  
Note:  
• The audio source on a disc in a Dolby Digital multi channel surround  
format cannot be recorded as digital sound by an MD or DAT deck.  
• By hooking this unit up to a Dolby Digital decoder, you can enjoy  
high-quality Dolby Digital multi channel surround sound as heard in the  
movie theaters.  
• Playing back a DVD using incorrect settings may generate noise distor-  
tion and may also damage the speakers.  
Connection to a Cable/Satellite Box  
external tuner  
(cable/satellite box)  
rear of TV  
rear of the unit  
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
AUDIO OUT  
OUT  
OUT  
Y
L
AUDIO IN  
L
C
B
PB  
/
/
R
R
COAXIAL  
VIDEO OUT  
VIDEO IN  
R
C
PR  
R
A
U
D
I
O
I
N
L
L1  
R
V
I
D
E
O
I
N
DVD/VCR  
VCR  
AUDIO OUT  
AUDIO OUT  
AUDIO IN  
RCA audio cable  
RCA video cable  
L
L
L
AUDIO IN  
VIDEO IN  
RCA audio cable  
RCA video cable  
R
R
R
VIDEO OUT  
VIDEO OUT  
VIDEO IN  
Using the unit with a cable/satellite box  
Supplied cables used in this connection are as follows:  
1. Connect an RCA audio and video cables to the audio and  
video output jacks of your cable/satellite box and to the audio  
• RCA audio cable (L/R) x 1  
• RCA video cable x 1  
Please purchase the rest of the necessary cables at your  
local store.  
and video input jacks at the rear of the unit  
.
2. Press [INPUT SELECT] on your remote control until “L1” is  
displayed on your TV.  
Special note when connected to a cable/satellite box:  
Note:  
• Only the active channel on your cable/satellite box may be  
viewed or recorded when connected to this unit.  
Do not change channels during a recording. You cannot record  
on channel while viewing another.  
• Your cable/satellite box can be accessed only by connecting it to L1  
(rear panel jacks) of the unit. Even if the unit is turned off, the signal  
from the external tuner is output to the TV through the unit.  
• Always use the LEFT (white) audio output jack from the external  
tuner to ensure that the audio is mixed down correctly to mono  
for this unit. If you use the RIGHT (red) jack, you will record the  
right audio only.  
L1: Rear panel terminals  
L2: Front panel terminals  
Refer to “Front & Rear Terminals” on page 9 for more information.  
7
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
7
2009/09/17 13:53:21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation for Use  
Turning on Unit for the First Time  
Clock Setting  
VCR  
VCR  
Please note: most instructions in this man-  
ual refer to remote control use.  
Press [SETUP] and select “CLOCK SET”.  
- M E N U -  
Be sure your TV’s input is set to VIDEO. (Name may  
vary with TV manufacturer. See your TV manual for  
details.)  
1
1
2
TIMER PROGRAMMING  
SATELLITE LINK  
Then press [B] to go to next step.  
AUTO REPEAT [OFF]  
CLOCK SET  
B
SETUP  
LANGUAGE SELECT  
or  
Select your on-screen language.  
Then press [B] to continue.  
LANGUAGE SELECT  
B
ENGLISH  
[ON]  
FRANCAIS  
ESPAÑOL  
• If the clock is not set, the “CLOCK SET” menu appears when you  
POWER  
press [SETUP]. In this case, go to step 2.  
or  
CLOCK SET  
Select the current month.  
Then press [B] to go to next step.  
2
3
4
5
6
7
8
MONTH DAY  
1 0 - -  
YEAR  
/
- - - -  
When “CLOCK SET” menu appears,  
go to step 2 in “Clock Setting” on this page.  
CLOCK SET  
3
HOUR MINUTE  
AM/PM  
- -  
MONTH DAY  
1 0 – –  
YEAR  
- -  
:
- -  
/
– – – –  
or  
HOUR MINUTE  
– – – –  
AM/PM  
– –  
:
or  
CLOCK SET  
Select the current day.  
Then press [B] to go to next step.  
MONTH DAY  
1 0 0 6  
YEAR  
- - - -  
/
HOUR MINUTE  
AM/PM  
- -  
- -  
:
- -  
or  
To Change the Selected On-screen Language  
CLOCK SET  
Select the current year.  
Then press [B] to go to next step.  
- M E N U -  
MONTH DAY  
1 0 0 6  
YEAR  
TUE 2 0 0 9  
Press [SETUP] until the main menu appears.  
/
1
B
TIMER PROGRAMMING  
SATELLITE LINK  
HOUR MINUTE  
- - - -  
AM/PM  
- -  
SETUP  
:
AUTO REPEAT [OFF]  
CLOCK SET  
or  
LANGUAGE SELECT  
CLOCK SET  
Select the current hour.  
Then press [B] to go to next step.  
- M E N U -  
MONTH DAY  
YEAR  
TUE 2 0 0 9  
Select “LANGUAGE SELECT”.  
Then press [B] to go to next step.  
1 0 0 6  
/
2
TIMER PROGRAMMING  
SATELLITE LINK  
HOUR MINUTE  
0 5 - -  
AM/PM  
- -  
AUTO REPEAT [OFF]  
CLOCK SET  
:
or  
B
LANGUAGE SELECT  
or  
CLOCK SET  
Select the current minute.  
Then press [B] to go to next step.  
MONTH DAY  
YEAR  
TUE 2 0 0 9  
Select “ENGLISH”, “FRANCAIS” or  
“ESPAÑOL”. Then press [CLEAR/C.RESET].  
LANGUAGE SELECT  
1 0 0 6  
/
3
B
ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
HOUR MINUTE  
0 5 4 0  
AM/PM  
- -  
:
or  
CLEAR/  
C. RESET  
or  
CLOCK SET  
Select “AM” or “PM”.  
MONTH DAY  
YEAR  
TUE 2 0 0 9  
Note:  
1 0 0 6  
/
• If you accidentally select Spanish or French and need English:  
HOUR MINUTE  
0 5 4 0  
AM/PM  
P M AM  
B PM  
or  
:
Press [SETUP] and choose  
SELEC. IDIOMA  
or SELECTION LANGUE.  
Press [B] and select “ENGLISH”. Finally, press [CLEAR/C.RESET].  
Press [SETUP] to exit the “CLOCK SET” menu.  
SETUP  
Note:  
• To go back, press [s] during steps 2 to 7.  
• Clock setting will be lost after a power failure, or this unit has been  
unplugged for more than 30 seconds.  
8
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
8
2009/09/17 13:53:21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function Overview  
Front Panel Indicator Lights  
Lights up when the progressive scan system is activated.  
Lights up when the inserted disc  
is being played back.  
Blinks when an unplayable disc  
is inserted.  
Lights up during a recording or one-touch timer  
Lights up when this unit  
is in the DVD mode.  
recording (OTR). Blinks when a recording is paused.  
OPEN/CLOSE  
OUTPUT  
POWER  
VCR  
DVD PROGRESSIVE SCAN  
STOP PLAY  
REW  
F.FWD STOP/EJECT PLAY  
REC/OTR  
SKIP  
H
GSKIP  
TRACKING  
REV  
FWD  
Lights up when the unit is turned on.  
Lights up when this unit is in the VCR mode.  
Lights up when the timer recording or  
one-touch timer recording (OTR) has been set.  
Selecting DVD or VCR Operation  
You must first select either DVD or VCR operation.  
OPEN/CLOSE  
POWER  
OPEN/CLOSE  
TRACKING  
SPEED  
T-SET  
OUTPUT  
VCR MODE  
VCR  
DVD PROGRESSIVE SCAN  
STOP  
PLAY  
SKIP  
H
G
SKIP  
TRACKING  
1
4
7
2
5
8
3
6
9
REV  
FWD  
Press [VCR ] on the remote control.  
(The VCR OUTPUT light will illuminate.)  
CLEAR/  
INPUT  
SELECT  
C. RESET  
0
VCR  
+10  
DVD  
VCR button  
DVD button  
DISPLAY  
MODE  
DVD MODE  
Press [DVD ] on the remote control.  
(The DVD OUTPUT light will illuminate.)  
PLAY  
STOP  
SKIP  
OUTPUT  
OUTPUT button  
REC/OTR  
PAUSE  
AUDIO  
VCR  
DVD  
D
SEARCH  
MODE  
TOP MENU  
MENU  
S
DVD OUTPUT light  
VCR OUTPUT light  
ENTER  
SETUP  
ZOOM  
RETURN  
A-B  
SUBTITLE  
ANGLE  
REPEAT  
Front & Rear Terminals  
rear panel  
front panel  
1
2
3
DVD  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
DIGITAL  
AUDIO S-VIDEO  
OUT  
OUT  
AUDIO OUT  
L1  
Y
L
POWER  
AUDIO IN  
L
REW  
F.FWD STOP/EJECT PLAY  
REC/OTR  
C
/
/
PB  
B
R
COAXIAL  
VIDEO OUT  
VIDEO IN  
R
C
PR  
R
L2  
7 6 5 4  
8
4
3
1: DVD AUDIO OUT* (analog) jacks  
5: DVD/VCR VIDEO OUT jack  
Connect an audio cable from here to the audio input jack of your televi-  
sion or audio device.  
Connect a video cable from here to the VIDEO input jack of your televi-  
sion or audio device. Standard connection for DVD/VCR use.  
6: COMPONENT VIDEO OUT* jacks  
Connect component video cables from here to the component video  
input jacks of your television.  
2: DVD/VCR AUDIO OUT jacks  
Connect an audio cable from here to the audio input jack of your television  
or audio device. Standard connection for DVD/VCR use.  
7: S-VIDEO OUT* jack  
Connect an S-video cable from here to the S-video input jack of your  
television.  
3: VCR AUDIO IN jack  
Connect a monaural audio cable from the audio output jack of your  
camcorder, VCR, etc. to here. After making the connection, press  
[INPUT SELECT] on the remote control. Select “L1” to activate the rear  
AUDIO IN jack, or “L2” to activate the front.  
8: DIGITAL AUDIO OUT COAXIAL* jack  
Connect a digital audio coaxial cable from here to the digital audio input  
jack of your digital audio receiver.  
4: VCR VIDEO IN jack  
Connect a video cable from the video output jack of your camcorder, VCR,  
etc. to here. After making the connection, press [INPUT SELECT] on the  
remote control. Select “L1” to activate the rear VIDEO IN jack, or “L2” to  
activate the front.  
* For enhanced DVD viewing. DVD/VCR video and audio connection required  
to view cassette tapes.  
Note:  
• Audio and video cables are included for both VCR and DVD viewing.  
You can enhance your DVD picture and sound quality with an S-video  
cable, component video cables, or a digital audio coaxial cable. Please  
purchase the necessary cables at your local store. (Refer to pages  
6-7.)  
9
EN  
E8E0AUD_DV220SL8A_EN_v1.indd  
9
2009/09/17 13:53:24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
DVD mode  
VCR mode  
Media  
POWER  
OPEN/CLOSE  
TRACKING  
Button  
SPEED  
T-SET  
(Alphabetical order)  
1
4
7
2
5
8
0
3
1
4
7
2
5
8
3
6
9
6
• To select chapter or title directly. • To select track or file directly.  
• To search forward/backward  
9
+10  
CLEAR/  
INPUT  
SELECT  
• To forward/backward a tape.  
• To begin slow forward  
playback in the pause mode.  
C. RESET  
through a disc.  
• To search forward/backward  
through a disc.  
0
VCR  
+10  
DVD  
• To begin slow forward/reverse  
playback in the pause mode.  
DISPLAY  
MODE  
A-B  
• To repeat between your chosen • To repeat between your  
PLAY  
point of A and B.  
chosen point of A and B. (CD)  
ANGLE  
AUDIO  
STOP  
SKIP  
• To select camera angles on a  
disc.  
REC/OTR  
TOP MENU  
MENU  
PAUSE  
AUDIO  
• To select audio languages on a • To select “STEREO”, “L-ch” or  
disc.  
SEARCH  
MODE  
“R-ch”. (CD)  
ENTER  
• To clear the markers. (CD)  
• To remove status number in  
program input.  
• To clear numbers entered  
incorrectly.  
• To cancel the point for A-B  
repeat. (CD)  
• To clear the markers.  
• To clear numbers entered  
incorrectly.  
• To cancel the point for A-B  
repeat.  
SETUP  
ZOOM  
RETURN  
A-B  
CLEAR/  
C. RESET  
• To exit the VCR menu.  
• To reset the tape counter.  
SUBTITLE  
ANGLE  
REPEAT  
DISPLAY  
DVD  
• To display the current disc  
mode.  
• To display the current disc  
mode.  
• To display the current time, tape  
counter, and L1 or L2.  
• To select DVD output mode.  
• To activate DVD mode.  
• To select the DVD output mode.  
• To activate DVD mode.  
• To select an item on  
the VCR menu.  
ENTER  
• To advance to the  
next VCR menu.  
• To move the cursor and  
determine its position.  
• To move the cursor and  
determine its position.  
• To go back one step  
during clock and  
timer programming.  
Installing the Batteries for  
the Remote Control  
INPUT  
SELECT  
• To select input “L1” or “L2”.  
Install the batteries (AA x 2) matching  
the polarity indicated inside battery  
compartment of the remote control.  
MENU  
MODE  
• To call up the disc menu on a  
disc.  
• To call up the file list. (MP3)  
• To arrange the playing order or  
play randomly.  
• To set virtual surround on/off.  
• To set black level on/off.  
• To set virtual surround on/off.  
1
2
3
OPEN/CLOSE  
PAUSE  
• To eject the cassette tape from  
the cassette compartment.  
• To open or close the disc tray.  
• To open or close the disc tray.  
• To pause tape playback or  
recording.  
• To advance playback one frame  
at a time.  
• To pause disc playback.  
• To advance playback one frame • To pause disc playback.  
at a time.  
• To begin disc playback.  
• To begin disc playback.  
• To begin tape playback.  
PLAY  
Keep in mind the following when using the  
remote control:  
• To turn the unit on or to turn  
• To turn the unit on or to turn  
• To turn the unit on or to turn  
POWER  
the unit into the standby mode. the unit into the standby mode. the unit into the standby mode.  
(To completely turn off the unit, (To completely turn off the unit, (To completely turn off the unit,  
you must unplug the AC power you must unplug the AC power you must unplug the AC power  
Make sure that there are no obstacles  
between the remote control and the infra-  
red sensor window on the unit.  
cord.)  
cord.)  
cord.)  
REC/OTR  
REPEAT  
RETURN  
• To start recording or one-touch  
timer recording. (OTR)  
• The maximum operable ranges from the  
unit are as follows.  
- Line of sight: approx. 23 feet (7m)  
- Either side of center:  
approx. 16 feet (5m) within 30°  
- Above: approx. 16 feet (5m) within 15°  
- Below: approx. 10 feet (3m) within 30°  
• To play back a track or disc  
repeatedly. (CD)  
• To play back a file, folder or disc  
repeatedly. (MP3)  
• To play back a chapter or title  
repeatedly.  
• To select the repeat mode on/  
off.  
• To return to the previous opera- • To return to the previous opera-  
tion in menu.  
tion in menu.  
SEARCH  
MODE  
• To search track.  
• To search chapter, title or time.  
• To set or search the markers.  
• To call up the index or time  
search menu.  
• To search time. (CD)  
• To set or search the markers. (CD)  
SETUP  
SKIP  
• To call up the DVD menu.  
• To skip chapters or titles.  
• To call up the DVD menu.  
• To skip tracks or files.  
• To call up the VCR menu.  
SPEED  
• To select the recording speed.  
• To stop playback or recording.  
STOP  
• To stop playback.  
• To stop playback.  
SUBTITLE  
Note:  
• To select subtitles on a disc.  
• Do not mix alkaline and manganese batteries.  
• Do not mix old and new batteries.  
• To return to the top file of the  
highest hierarchy in the  
program and file list. (MP3)  
TOP MENU  
• To call up the top menu on a  
disc.  
• Always remove batteries from remote control  
if they are dead or if the remote control is not  
to be used for an extended period of time.  
This will prevent battery acid from leaking  
into the battery compartment.  
TRACKING  
TRACKING  
• To adjust the tracking manually  
during playback.  
T-SET  
• To put the VCR into standby  
mode for a timer recording.  
If you turn off this unit, [OPEN/CLOSE A] on the  
remote control is not available.  
Be sure to use [OPEN/CLOSE A] or  
[STOP/EJECT C A] on the unit.  
VCR  
• To select the VCR output mode.  
• To activate VCR mode.  
ZOOM  
• To magnify part of a picture.  
(2x/4x)  
10  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 10  
2009/09/17 13:53:25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VCR FUNCTIONS  
Playback  
Before: Turn on the TV.  
Note:  
4
1
VCR  
• When a cassette tape  
without a record tab is  
inserted, the unit will  
start playback automati-  
cally.  
• Tracking will be auto-  
matically adjusted upon  
playback. To adjust the  
tracking manually, press  
[TRACKING K / L]  
during playback.  
POWER  
OPEN/CLOSE  
SPEED  
T-SET  
Insert a cassette tape  
into this unit.  
To start playback  
1
2
4
1
4
7
2
5
8
3
6
9
TRACKING  
POWER  
REW  
F.FWD STOP/EJECT PLAY  
REC/OTR  
PLAY  
CLEAR/  
INPUT  
SELECT  
C. RESET  
0
VCR  
+10  
DVD  
DISPLAY  
MODE  
To stop playback  
To eject the cassette tape  
3
OPEN/CLOSE  
PLAY  
STOP  
2
STOP  
3
4 3  
2
Other Operations  
To cue or review picture during playback (picture search)  
To play back in slow motion (slow mode)  
Use  
[
g
]
or  
[
h
]
([ F.FWD  
g
]
or [REW  
h
]
on this unit).  
Press [PAUSE  
F]  
during playback, then press  
[
g
]
([ F.FWD  
g
]
on this  
unit).  
• Press it again and the unit will search in super high speed. (in the  
SLP mode only)  
To freeze the picture on TV screen during playback (still mode)  
Press [PAUSE F]. Each time you press the button, the picture will  
be forwarded by one frame.  
• If the picture begins to vibrate vertically in the still mode,  
stabilize the picture by using [TRACKING K / L].  
• If the picture is distorted or rolling vertically, adjust the vertical  
hold control on your TV if equipped.  
• If you want to change speed in slow mode, press [g] or [h]  
([ F.FWD g] or [REW h] on this unit), slow speed will be more  
fast and slow mode.  
If the noise bars appear on the TV screen, you can reduce it by using  
[TRACKING  
K
/
L].  
To rewind the cassette tape automatically (auto rewind)  
When a cassette tape reaches its end during playback, fast-  
forward or recording (except timer recording and one-touch  
timer recording), the cassette tape will automatically rewind to  
the beginning. After rewinding finishes, the unit will eject the  
cassette tape.  
To Reset the Cassette Tape Counter (counter reset)  
Press [DISPLAY] to display the cassette tape counter on the TV.  
Press [CLEAR/C.RESET] to reset the counter to “0:00:00”.  
Note:  
• To prevent damage to the cassette tape, still or slow mode will auto-  
matically stop after 5 minutes.  
• To return to playback from the picture search, still or slow mode, press  
[PLAY B].  
Time Search  
Index Search  
To search by index mark. The index mark will be made automati-  
cally at the beginning of each recording.  
To search by length of time.  
VCR  
VCR  
• Insert a cassette tape into this unit.  
• Insert a cassette tape into this unit.  
Press [SEARCH MODE] twice.  
1
2
TIME SEARCH  
– : – –  
Press [SEARCH MODE] once.  
SEARCH  
MODE  
1
INDEX SEARCH  
SEARCH  
MODE  
– –  
Select the desired length of time  
for fast forwarding or rewinding.  
To select index mark  
TIME SEARCH  
2 : 5 0  
2
INDEX SEARCH  
0 3  
01 ~ 20  
0:01~ 9:59  
or  
beginning of  
the contents  
current program  
end of the  
contents  
or  
(1 minute~9 hours and 59 minutes)  
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5  
To rewind  
02  
01  
01  
02  
03  
3
4
ss  
index mark  
To rewind  
3
4
ss  
To fast forward  
BB  
To fast forward  
BB  
When selected length of time is  
reached, playback will start  
automatically.  
PLAY B  
When index mark is reached,  
playback automatically begins.  
PLAY B  
Note for Index Search & Time Search:  
• These functions are not available during recording.  
• Press [STOP C] to stop the search.  
• If a cassette tape ends during a search, your search will be canceled and  
Note:  
• The time gap between index marks should be more than 1 minute for SP  
mode, 2 minutes for LP mode and 3 minutes for SLP mode.  
the cassette tape will rewind to the beginning.  
11  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 11  
2009/09/17 13:53:29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Auto Repeat  
When “AUTO REPEAT“ is set to “ON“, the cassette tape will automatically rewind and start over when it reaches the end.  
This will continue until auto repeat function is turned off.  
VCR  
- M E N U -  
- M E N U -  
Press [SETUP], and choose “AUTO REPEAT”.  
Press [B] to “AUTO REPEAT” to set “ON” or “OFF”.  
1
2
TIMER PROGRAMMING  
SATELLITE LINK  
TIMER PROGRAMMING  
SATELLITE LINK  
B
AUTO REPEAT [ON]  
CLOCK SET  
B
AUTO REPEAT [OFF]  
CLOCK SET  
SETUP  
LANGUAGE SELECT  
LANGUAGE SELECT  
or  
Press [SETUP] to exit.  
Note:  
• The auto repeat function can also be set “ON” or “OFF” by pressing [REPEAT] on the remote control.  
• To cancel auto repeat function, follow step 1 above. Then, press [B] so that “OFF” appears beside “AUTO REPEAT”. Press [SETUP] to exit.  
• The auto repeat playback will start automatically if you select “AUTO REPEAT” to “ON” in the stop mode.  
Recording  
This unit has no tuner system so it cannot receive TV broadcasts without external  
tuner or such devices.  
Note:  
TV  
this unit  
external tuner  
• You can also set to external tuner. Refer to “Satellite Link” on page 14.  
Recording & One-touch Timer Recording (OTR)  
VCR  
6
3
2
POWER  
OPEN/CLOSE  
TRACKING  
SPEED  
T-SET  
1
4
7
2
5
8
3
6
9
Insert a recordable  
cassette tape.  
Press [INPUT SELECT] until “L1” or  
“L2” is displayed on the TV screen.  
Select “L1” to activate rear input jacks.  
Select “L2” to activate front input jacks.  
1
2
POWER  
CLEAR/  
INPUT  
SELECT  
C. RESET  
REW  
F.FWD STOP/EJECT PLAY  
REC/OTR  
0
VCR  
+10  
DVD  
DISPLAY  
MODE  
INPUT  
SELECT  
PLAY  
STOP  
SKIP  
5
4
REC/OTR  
PAUSE  
See note on the right.  
5 6  
4
1
Press [SPEED] to select the desired tape speed.  
3
4
5
To stop recording temporarily (Pause mode)  
SPEED  
Tape speed  
Type of tape  
SP mode  
Recording / playback time  
Press [PAUSE F].  
T60  
T120  
T160  
2-2/3hours  
8hours  
• During the recording in pause mode, 5  
C
marks appear on the  
mark represents 1 minute.  
• Press it again to resume recording.  
1hour  
3hours  
2hours  
6hours  
TV screen. Each  
C
SP  
SLP mode  
• Pause mode will be automatically canceled after 5 minutes to  
prevent damage to the cassette tape and the video head.  
Press [REC/OTR] until desired recording time is selected.  
REC/OTR  
REC  
(normal recording)  
OTR (0:30)  
OTR (1:00).....  
OTR (7:30)  
Note:  
• Do not change the external tuner’s channel while you are recording.  
You CANNOT watch one channel and record another at the same time.  
• Connect your external tuner to the L1 (rear panel) jacks of the unit.  
Connect camcorders and other such devices to the L2 (front panel)  
jacks. Refer to page 7, 9.  
OTR (8:00)  
REC  
Press [STOP C] to  
stop recording.  
Press [OPEN/CLOSE A] to eject the  
recorded cassette tape.  
6
OPEN/CLOSE  
STOP  
Accidental Erasure Prevention  
To prevent accidental recording, remove erase-  
protection tab of the cassette tape. To record  
on it later, cover the hole with adhesive tape.  
You CANNOT dub a DVD to a video cassette tape.  
erase-protection tab  
Timer Recording  
VCR  
• Insert a recordable cassette tape.  
• Make sure to turn on the external  
tuner.  
Press [SETUP]. Select “TIMER PROGRAMMING”.  
Select an empty program number.  
Then press [B] to go to next step.  
PROGRAM NUMBER  
DATE – – / – –  
START TIME – – : – – – –  
1
1
2
- M E N U -  
TIMER PROGRAMMING  
PROG 12345678  
DATE  
START TIME  
END  
L1/L2  
REC  
TIME – – : – – – –  
– –  
SPEED – –  
B
TIMER PROGRAMMING  
SETUP  
SATELLITE LINK  
AUTO REPEAT [OFF]  
CLOCK SET  
LANGUAGE SELECT  
or  
END  
TIME  
L1/L2  
REC SPEED  
Available program number flashes.  
12  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 12  
2009/09/17 13:53:32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.  
Then press [B] to go to next step.  
Select recording speed.  
Then press [CLEAR/C.RESET].  
PROGRAM NUMBER  
1
3
4
9
1
B
ONCE  
DATE  
1 0 / 0 6 TUE  
DAILY  
WEEKLY  
START TIME 0 7 : 3 0 PM  
END  
L1/L2  
REC  
TIME 0 8 : 3 0 PM  
CLEAR/  
C. RESET  
L1  
or  
SPEED SP  
or  
B
SP  
SLP  
[B].  
To set another program after step 9, press  
Then continue with step 2.  
Select the desired date.  
Then press [B] to go to next step.  
ONE TIME PROGRAM  
PROGRAM NUMBER  
Press [T-SET] to set the timer standby mode.  
or  
10  
1
DATE  
1 0 / 0 6 TUE  
T-SET  
START TIME – – : – – – –  
END  
L1/L2  
REC  
TIME – – : – – – –  
– –  
SPEED – –  
indicator on this unit lights up and the unit goes to the DVD  
mode.  
or  
• You can program the unit to record up to 8 programs, for up to  
a year in advance.  
Note:  
• To go back one step, press [s] during steps 3 to 9.  
Select the desired starting time (hour).  
Then press [B] to go to next step.  
5
6
• Select “L1” to activate rear input jacks. Select “L2” to activate front input  
jacks.  
ONE TIME PROGRAM  
or  
PROGRAM NUMBER  
DATE 1 0 / 0 6 TUE  
START TIME 0 7 : 3 0 – –  
1
To check, correct or cancel a timer program  
END  
L1/L2  
REC  
TIME – – : – – – –  
– –  
SPEED – –  
1) Press [T-SET] then, [VCR ] on the remote control.  
2) Press [SETUP] to call up the main menu.  
3) Select “TIMER PROGRAMMING” by using [K / L], then press  
[B].  
4) Select the program number which you want to check by  
using [K / L]. The details of the program you selected will  
appear on the TV screen.  
or  
ONE TIME PROGRAM  
PROGRAM NUMBER  
Select “AM” or “PM”.  
Then press [B] to go to next step.  
1
DATE  
1 0 / 0 6 TUE  
START TIME 0 7 : 3 0 PM  
END  
TIME – – : – – – –  
L1/L2  
REC  
– –  
SPEED – –  
AM  
or  
• Go to the digit you want to change by using [s / B]. Then,  
B
PM  
enter correct numbers by using [K / L].  
• You may cancel the entire program by pressing [s] while  
the program number blinks.  
Repeat the procedure in steps 5 and 6 to set the ending time.  
7
8
5) Press [CLEAR/C.RESET] to exit.  
6) Press [T-SET] to return to the timer standby mode.  
ONE TIME PROGRAM  
Select “L1” or “L2”.  
Then press [B] to go to next step.  
PROGRAM NUMBER  
DATE 1 0 / 0 6 TUE  
START TIME 0 7 : 3 0 PM  
1
To cancel a timer recording in progress  
END  
L1/L2  
REC  
TIME 0 8 : 3 0 PM  
L1  
or  
Press [STOP/EJECT  
C
A] on the unit.  
SPEED – –  
Notes for Timer Recording & One-touch Timer Recording (OTR)  
• If a cassette tape is not in the unit or does not have the erase-protection tab, indicator on this unit blinks and timer recording cannot  
be performed. Please insert a recordable cassette tape.  
• When timer recordings are set, indicator on this unit lights up. To use the VCR as usual until the time for the recording, press [T-SET]  
so that indicator lights off.  
After an one-touch timer recording or a timer recording has been set, this unit operates as follows:  
• If a cassette tape runs out before an one-touch timer recording or a timer recording is finished, the unit ejects the cassette tape. Press  
[T-SET] on the remote control or [STOP/EJECT  
C
A] on the unit, then press [VCR ] to activate the VCR function again.  
• Once the unit turns to the timer standby mode, no VCR functions are available until [T-SET] is pressed.  
• To cancel the timer standby mode, press [T-SET] on the remote control or [STOP/EJECT  
the VCR function again.  
C
A] on the unit, then press [VCR ] to activate  
When an one-touch timer recording or a timer recording is completed...  
• If auto power off for DVD has been activated and there are timer recordings on standby, the unit turns off automatically, and  
indicator on this unit lights to indicate the unit is in the timer standby mode.  
indicator on this unit flashes if there are no more timer recordings on standby.  
• If auto power off for DVD has NOT been activated, the unit goes to the DVD mode and all the VCR functions will be unavailable. All the  
DVD functions are available during one-touch timer recording, timer standby mode and timer recording.  
Press [STOP/EJECT  
• Press [OUTPUT] on this unit or [VCR ] on the remote control to use the VCR when the unit is turned on. In case timer recording is in  
standby mode, press [STOP/EJECT A] on this unit or [T-SET] on the remote control, and then press [OUTPUT] on this unit or  
[VCR ] on the remote control.  
C
A]  
on this unit or [T-SET] on the remote control to use the VCR when the unit is turned off.  
C
If you want to use the DVD player during a timer recording or while indicator on this unit is on or blinking.  
• Press [POWER] to turn on the unit. Press [DVD ] on the remote control to choose DVD mode, then continue with the other DVD  
features as described in this manual.  
Note for timer recording:  
If there is a power failure or the unit is unplugged for more than 30 seconds, clock setting and all timer programs will be lost.  
13  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 13  
2009/09/17 13:53:34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Satellite Link  
You can set the unit to start recording whenever it detects a video signal from the external tuner.  
Preparing for the Satellite Link Timer Recording:  
Preparation on the tuner  
Preparation on this unit  
• Satellite link accepts only the connection from L1 (rear) with the  
external tuner. (The connection from L2 cannot read any signals  
from the cable/satellite box.)  
L1  
external tuner  
DVD  
AUDIO  
OUT  
DVD/VCR  
AUDIO OUT  
VCR  
COMPONENT  
VIDEO OUT  
S-VIDEO  
OUT  
DIGITAL  
AUDIO OUT  
Y
C
L
The external tuner should be equipped with some kind of timer  
function. Using timer function of the tuner, set it to output audio/video  
signals when it comes to the time you want to start recording, and  
stop output audio/video signals when it comes to the time you want to  
finish recording. Refer to the tuner’s manual on how to set the timer.  
AUDIO IN  
VIDEO IN  
L
/
/
PB  
B
R
COAXIAL  
VIDEO OUT  
R
C
PR  
R
RCA audio/video cables  
• Make sure to turn off the tuner when you finish setting.  
VCR  
Press [SPEED] to select the desired tape speed.  
Set the desired start minutes.  
If you wish to go back to the left, press [s ].  
SATELLITE LINK  
1
5
6
SPEED  
Tape speed  
Type of tape  
SP mode  
Recording / playback time  
0 1  
:
0 0 PM  
T60  
T120  
T160  
2-2/3hours  
8hours  
1hour  
3hours  
2hours  
6hours  
or  
SP  
SLP mode  
In stop mode, press [SETUP].  
Press [B] to set satellite link standby mode.  
SATELLITE LINK  
2
3
SETUP  
0 1  
:
3 0 PM  
[ON]  
- M E N U -  
Select “SATELLITE LINK”.  
Then press [B] to go to next step.  
TIMER PROGRAMMING  
SATELLITE LINK  
B
indicator on this unit lights up and the unit goes to the DVD  
mode. If you do not use DVD function, turn off the unit.  
AUTO REPEAT  
CLOCK SET  
[OFF]  
LANGUAGE SELECT  
or  
• Satellite unit must be turned on for VCR satellite link to start.  
If cable/satellite box is not set to output signals, satellite link will  
remain in standby mode.  
Set the desired start hour.  
Then press [B] to go to next step.  
SATELLITE LINK  
4
To cancel the satellite link function in standby mode:  
1 2  
:
0 0 AM  
Press [T-SET] on the remote control or [STOP/EJECT  
C
A] on this  
or  
unit.  
To cancel the satellite link function while the satellite link  
recording is in progress:  
• The hour can be selected from 1-12 with AM or PM.  
• When the external tuner signal is stopped, recording will be stopped.  
Press [STOP/EJECT  
C
A] on this unit.  
Note:  
• If you have not set the clock, “CLOCK SET” menu will appear at step 2. Refer to “Clock Setting” on page 8.  
• You cannot set the ending time for the satellite link timer recording on this unit.  
• Recording picture will be distorted if the copy protection signal is being detected during satellite link timer recording.  
• When a regular timer recording and the satellite link timer recording are overlapped, those recordings are recorded as illustrated below.  
e.g.) In case of the satellite link timer recording is overlapped  
on the existing timer recording.  
e.g.) In case of the timer recording is programmed in the middle  
of the satellite link timer recording  
e.g.) In case of the timer recording is overlapped on the existing  
satellite link timer recording.  
timer recording  
satellite link  
timer recording  
satellite link  
timer recording  
satellite link  
recording result  
recording result  
recording result  
Copying a Cassette Tape  
Warning: Unauthorized recordings of copyrighted cassette tapes  
output jacks of  
rear of the unit  
L1  
may be an infringement of copyright laws.  
external device  
AUDIO OUT  
L
DVD/VCR  
AUDIO OUT  
VCR  
1) Insert a pre-recorded cassette tape into another external  
device for playback.  
2) Insert a recordable cassette tape into this unit for recording.  
3) Press [SPEED] on the remote control to select recording  
speed (SP or SLP).  
4) Press [INPUT SELECT] on the remote control to select L1 or  
L2. Choose L1 if device is connected to rear input jacks, or L2  
if connected to the front. Refer to Front & Rear Terminalson  
page 9 for more details.  
RCA audio/video  
cables  
or  
L
AUDIO IN  
VIDEO IN  
R
R
VIDEO OUT  
VIDEO OUT  
You can use a video disc player, cable/satellite box or other audio/video  
component with audio/video output jacks.  
Note:  
• For best results during dubbing, use buttons on this unit whenever  
possible. The remote control might affect another device’s operation.  
• Always use video-quality shielded cables with RCA-type connectors.  
Standard audio cables are not recommended.  
5) Press [REC/OTR] on the unit.  
6) Press “PLAY” button on the external device.  
7) To stop recording, press [STOP/EJECT  
C
A] on this unit,  
• L2 input jacks are on the front of this unit.  
then stop playback of the external device.  
14  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 14  
2009/09/17 13:53:36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD FUNCTIONS  
Playback  
Before:  
Turn on the TV, amplifier and any other  
components which are connected to this  
unit. Make sure the TV and audio receiver  
POWER  
OPEN/CLOSE  
SPEED  
T-SET  
OPEN/CLOSE  
1
1
4
7
2
5
8
3
6
9
TRACKING  
OUTPUT  
are set to the correct channel.  
POWER  
VCR  
DVD PROGRESSIVE SCAN  
REW  
F.FWD STOP/EJECT PLAY  
REC/OTR  
STOP  
PLAY  
SKIP  
H
GSKIP  
TRACKING  
DVD  
CLEAR/  
INPUT  
SELECT  
C. RESET  
REV  
FWD  
0
VCR  
+10  
DVD  
DISPLAY  
MODE  
(
1
on page 16  
)
3
4
PLAY  
STOP  
Insert a disc with  
label facing up.  
1
1
2
4
3
Lights up when power is on.  
2
OPEN/CLOSE  
POWER  
Note:  
• When you play a CD-RW/-R with MP3 files, details on page 16.  
may appear at the top-right on the TV screen when the operation is prohibited by  
the disc or this unit.  
• Some DVD may be played from title 2 or 3 due to specific programs.  
• During the playback of a 2-layered disc, pictures may stop for a moment. This happens while the 1st  
layer is being switched to the 2nd layer. This is not a malfunction.  
To start playback  
To stop playback  
3
4
STOP  
PLAY  
• You can change the on-screen language for DVD function in “PLAYER MENU” menu. Refer to page 20.  
Disc Menu  
Fast Forward / Reverse Search  
DVD  
DVD  
E
1
Some discs contain menus which allow you to customize DVD  
playback. Use [K / L / s / B] to select an item, then press  
[ENTER] (or [PLAY B]).  
Press [g] or [h] repeatedly during playback to  
select the required forward or reverse speed.  
To use [SKIP H / REV], [G SKIP / FWD] on this unit  
Pressing and holding [SKIP  
H
/ REV] or  
[
G
SKIP / FWD] on this unit  
Calling Up a Menu Screen during Playback  
will also change forward or reverse playback speed.  
DVD  
To continue playback, press [PLAY B].  
Note:  
• Press [MENU] to call up the disc menu.  
For DVD, fast forward or reverse search speed is different depending on the  
• Press [TOP MENU] to call up the title menu.  
disc. Approximate speed is 1(2x), 2(8x), 3(20x), 4(50x), 5(100x).  
• For audio CD and MP3, approximate speed is 1(2x), 2(8x), 3(30x).  
Note:  
• Menu operations may vary depending on the disc. Refer to the manual  
accompanying the disc for details.  
Slow Forward / Reverse Search  
DVD  
Resume Playback  
1
DVD  
Press [g] or [h] repeatedly in the pause mode to  
select the required forward or reverse speed.  
Press [STOP C] during playback.  
To use [SKIP H / REV], [G SKIP / FWD] on this unit  
Resume message will appear on the  
Pressing and holding [SKIP  
H
/ REV] or  
[G  
SKIP / FWD] on this  
Resume ON  
TV screen.  
unit in the pause mode will also change forward or reverse  
playback speed.  
Press 'PLAY' to play from here.  
To play the beginning,  
press 'STOP' first and then 'PLAY'.  
Press [PLAY B], playback will resume  
from the point at which playback was  
To continue playback, press [PLAY B].  
stopped.  
e.g.) DVD  
Note:  
Note:  
• Slow forward or reverse speed is different depending on the disc. Ap-  
proximate speed is 1(1/16x), 2(1/8x), 3(1/2x).  
• To cancel resume, press [STOP C] one more time in the stop mode.  
• For MP3, playback will resume from the beginning of the track at which  
playback was stopped.  
• Set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in the slow  
playback mode are blurred. Refer to pages 20-21.  
• The resume playback information stays on even when the power is  
turned off, as long as the disc stays in the unit.  
Zoom  
DVD  
Paused and Step-by-Step Playback  
1) Press [ZOOM] during playback.  
2) Press [ZOOM] repeatedly to select the required zoom factor:  
2x, 4x or off.  
DVD  
Press [PAUSE F] during playback.  
x2  
x4  
To continue playback, press [PLAY B].  
DVD  
The disc goes forward by one frame each time [PAUSE F] is  
pressed in the pause mode.  
3) Press [K / L / s / B] to slide the zoomed picture across the TV  
screen.  
To continue playback, press [PLAY B].  
4) To exit zoom mode, press [ZOOM] to select OFF.  
Note:  
• For DVD, set “STILL MODE” to “FIELD” in “DISPLAY” menu if pictures in  
the pause mode are blurred. Refer to pages 20-21.  
Note:  
• Zoom function does not work while the disc menu is displayed.  
• 4x zoom is not available on some discs.  
• The picture may be distorted when you press [PAUSE k] or [h]  
repeatedly in the zoom mode.  
To use [SKIP H / REV], [G SKIP / FWD] on this unit  
DVD  
• In the zoom mode, it automatically changes  
position guide.  
2x (4x) to the zoomed  
Press once to skip chapters, tracks or titles to a desired point.  
15  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 15  
2009/09/17 13:53:38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
MP3 Playback  
MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit.  
DVD  
Insert a CD-RW/-R with MP3 files, the file list will automatically  
appear on the TV screen. Press [MENU] when you want to call up  
the file list again while CD-RW/-R with MP3 files is already inserted.  
Note:  
When selecting the folder:  
FILE LIST  
1
DISC NAME  
FOLDER  
MP3  
3
Depending on some sections, it may take a while to be recognized.  
folder name  
folder name  
folder name  
1
2
3
4
ENTER  
• Press [TOP MENU] to return to the first item.  
• Folders and MP3 files are displayed respectively as  
folder name  
3
or  
file name  
file name  
file name  
1
2
3
3
3
PLAY  
3
and  
.
ENTER  
PLAY  
1/  
2
folder name  
1
• A maximum of 255 folders or 999 files may be recognized on one disc.  
• Up to 8 hierarchies can be recognized in one folder. File in the 9th or  
deeper hierarchies cannot be played back.  
This unit recommends files recorded under the following circum-  
stances:  
• Press [B] when you want to go to the next hierarchy.  
• Press [s] when you want to go back to the previous  
hierarchy (except for the top hierarchy).  
• Sampling frequency: 44.1kHz or 48kHz  
• Constant bit rate: 32kbps ~ 320kbps  
• For MP3 file recorded in VBR (variable bit rate), the unit may not display the  
actual elapsed time.  
Press [STOP C] once to stop MP3  
2
playback temporarily.  
STOP  
Refer to “Resume Playback”  
on page 15.  
On-Screen Display  
You can check the information about the current disc by pressing [DISPLAY] on the remote control.  
DVD  
DVD  
appears only in a case multi-  
angle is available on the DVD.  
DISPLAY  
DISPLAY  
current playback status  
current playback status  
4/12 0:03:21 - 0:02:15  
T
1
2
11/16 0:00:00 - 0:03:30  
1
remaining time of the current track  
elapsed time of the current track  
current track number / total tracks  
remaining time of the current  
chapter  
DISPLAY  
elapsed time of the current  
chapter  
ALL:  
current track number / total tracks  
CH(Chapter):  
current chapter number /  
total chapters  
4/12 0:13:45 - 0:45:40  
T
current repeat setting, if active  
DISPLAY  
T:  
Track repeat  
A: All Tracks repeat  
B: A-B repeat  
A
1/3 0:00:00 - 1:23:45  
2
3
remaining time of the entire disc  
elapsed time of the entire disc  
remaining time of the current title  
elapsed time of the current title  
TT(Title):  
current title number / total titles  
DISPLAY  
3
DISPLAY  
Note:  
layer numbers, appears only when  
playing a two-layered disc.  
• When you are playing a disc in program or random mode,  
T
L1  
2
PROGRAM (or RANDOM) will be displayed instead of  
.
L0:  
L1:  
Layer 0 is playing  
Layer 1 is playing  
DVD  
current repeat setting, appears  
only when the repeat setting is  
active.  
DISPLAY  
current playback status  
C: Chapter repeat  
T:  
Title repeat  
B: A-B repeat  
TRACK 01  
1
2
A
the name of the file currently in  
play will be displayed.  
bit rate: the amount of audio and  
video data currently being read  
DISPLAY  
DISPLAY  
TR(Track):  
current track number / total tracks  
1/36 0:01:15  
T
current repeat setting, if active  
4
T:  
Track repeat  
G: Group (folder) repeat  
A: Disc repeat  
elapsed playing time of the  
current track  
DISPLAY  
PROGRAM  
RANDOM  
3
or  
(Only when you are playing a disc in program or random mode.)  
DISPLAY  
4
16  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 16  
2009/09/17 13:53:41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Search Functions  
Search function does not work during programmed or random playback.  
Using Track Search  
Using Time Search  
DVD  
DVD  
Press [SEARCH MODE].  
Press [SEARCH MODE] repeatedly until the time search display  
1
2
1
appears.  
SEARCH  
MODE  
SEARCH  
MODE  
/29  
TOTAL 1:29:00  
PLAY  
Select a desired disc time by using [the Number buttons] within 30  
Select track number by using [the Number buttons] within 30 seconds.  
2
seconds.  
1
4
7
2
5
8
0
3
1
4
7
2
5
8
0
3
6
6
TOTAL 1:29:00  
/29  
9
9
+10  
+10  
For the disc with less than 10 tracks, press the track number directly.  
For discs with more than 10 but less than 99 tracks, to play back single-  
digit track, press [0] first, then the track number (e.g., for track 3, press  
[0], [3]). To play back a double-digit track, press the track number.  
For discs with more than 100 tracks, to play back a single or a double-  
digit track, press [0] first, then the track number (e.g., for track 3, press  
[0], [0], [3], and for track 26, press [0], [2], [6]). To play back a triple-digit  
track, press the track number.  
Note:  
• When there is no need to enter a number, “0” appears automatically.  
For example, “0: 0_: _ _” appears in the time search display if the total  
time of the title or track is less than 10 minutes.  
• Press [CLEAR/C.RESET] to erase the incorrect input at step 2.  
• For audio CD, time search is not available for programmed and random  
playback.  
Using [SKIP H, G]  
Marker Setting  
Press [SKIP H, G] during playback.  
1
DVD  
Current Track  
(TR)  
SKIP  
This function allows you to assign a specific point on a disc to be  
called back later.  
TR 1 TR 2 TR 3 TR 4  
PLAY  
SKIP  
SKIP  
To set a marker  
Press [SEARCH MODE] repeatedly until the marker display  
appears.  
1
Note:  
[+10] can also bring the track search display, except for the disc with  
less than 10 tracks. For such a disc, track search can be performed by  
just pressing the track number.  
SEARCH  
MODE  
PLAY  
• For audio CD and MP3, track search is not available for programmed  
and random playback.  
Select a marker.  
2
or  
Using Title / Chapter Search  
Press [ENTER].  
3
DVD  
ENTER  
Press [SEARCH MODE] once for the chapter search.  
1
Press [SEARCH MODE] twice for the title search.  
To return to the marker later  
SEARCH  
MODE  
/12  
Press [SEARCH MODE] repeatedly until the marker display  
1
appears.  
PLAY  
SEARCH  
MODE  
Select title/chapter number by using [the Number buttons]  
within 30 seconds.  
2
Select the marker.  
1
4
7
2
5
8
0
3
2
6
or  
/12  
9
+10  
Press [ENTER] at the desired marker.  
3
ENTER  
Using [SKIP H, G]  
Press [SKIP H, G] during playback.  
1
Current Chapter  
(CH)  
To exit the marker screen  
1
CH 1 CH 2 CH 3 CH 4  
SKIP  
RETURN  
Press [RETURN ].  
SKIP  
SKIP  
SKIP  
PLAY  
or  
Current Title  
(TT)  
Note:  
• The marker display will disappear in about 30 seconds when there is no  
output.  
TT 1 TT2 TT3 TT4  
SKIP  
• To clear a marker, select the marker to be cleared at step 2 in the  
section “To set a marker” or “To return to the marker later” and then  
press [CLEAR/C.RESET].  
• Opening the disc tray or turning off the power will erase all markers.  
• Selecting “AC” at step 2 in the section “To set a marker” or “To return to  
the marker later” will also erase all markers.  
(If the disc has no chapters)  
Note:  
• Depending on the disc being played back, this function can also be  
performed by directly entering the desired chapter number with  
[the Number buttons]. Refer to the manual accompanying the disc.  
17  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 17  
2009/09/17 13:53:45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat / Random / Programmed Playback  
Repeat Playback  
Random Playback  
DVD  
DVD  
This function shuffles the playing order of tracks instead of playback  
in sequence.  
Repeat function is available only during playback.  
Press [REPEAT] during playback.  
1
Press [MODE] twice.  
RANDOM  
1
REPEAT  
CD-DA  
TOTAL 0:45:55  
PLAY  
RANDOM PROGRAM  
--no indication--  
MODE  
STOP  
PLAY  
e.g.) DVD  
e.g.) CD  
Each time you press [REPEAT], repeat function changes as exam-  
ple below.  
Press [PLAY B] to start random playback.  
2
(repeat off)  
OFF  
PLAY  
(current chapter repeat)  
(current title repeat)  
(repeat off)  
CHAPTER  
TITLE  
OFF  
Note:  
• To repeat the current track in the random mode, press  
[REPEAT] repeatedly until “ TRACK” appears during playback.  
• To repeat the entire random selections, press [REPEAT] repeatedly until  
ALL” appears during playback.  
• During random playback, you cannot go back to the previous track.  
(current track repeat)  
(entire disc repeat)  
TRACK  
ALL  
Programmed Playback  
DVD  
OFF  
(repeat off)  
You may determine the order in which tracks will play back.  
TRACK  
GROUP  
ALL  
(current file repeat)  
(current folder repeat)  
(entire disc repeat)  
Press [MODE] once.  
1
CD-DA  
TOTAL 0:00:00  
MODE  
STOP  
e.g.) CD  
Note:  
• Repeat setting (except “ALL”) will be cleared when moving to another  
title, chapter, track/file or folder.  
Using [K / L] to select desired track.  
2
3
CD-DA  
TOTAL 1:03:30  
Press [ENTER].  
1
5
3:30  
5:10  
10 4:20  
11 3:00  
12 3:20  
17 4:10  
22 2:50  
2/3  
• This function is not available with some discs or during repeat A-B  
playback.  
ENTER  
or  
Repeat A-B Playback  
• Up to 99 tracks can be programmed.  
• If eight or more tracks were in a program,  
use [SKIP H, G] to see all the tracks.  
• While an MP3 folder is open:  
DVD  
–Press [B] when you want to go to the next hierarchy.  
–Press [s] when you want to go back to the previous  
hierarchy (except for the top hierarchy).  
Repeat function is available only during playback.  
Press [A-B] at your desired starting point (A).  
1
Press [PLAY B] to start programmed playback.  
A-  
A-B  
PLAY  
PLAY  
Press [A-B] at your desired ending point (B).  
2
Note:  
A-B  
A-B  
• Press [CLEAR/C.RESET] at step 2 to erase the most recently entered  
track.  
• To erase all programmed tracks at once, select “ALL CLEAR’’ and press  
[ENTER] at step 2.  
Point B should be in the same title or track as point A.  
• While a program is being played back, [STOP C] works as follows;  
- Press [STOP C] and [PLAY B] next, so that the programmed  
playback restarts. (CD playback restarts from the current point. MP3  
playback restarts from the beginning of the current file.)  
- Press [STOP C] twice and [PLAY B] next, so that playback restarts  
from the first track in the original order. However, your programmed  
playback can be restarted when you follow the above steps. (Your  
programs are still stored until either the disc tray is open or power is  
turned off.)  
Note:  
• To exit the sequence, press [A-B] so that “OFF” appears.  
• To cancel point A, press [CLEAR/C.RESET] at step 1.  
• This function is not available in the other repeat modes.  
• To repeat the current track in the program, press [REPEAT] repeatedly  
until  
appears during playback.  
TRACK’’  
• To repeat the entire program, press [REPEAT] repeatedly until  
ALL’’ appears during playback.  
18  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 18  
2009/09/17 13:53:50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Special Settings  
Subtitle Language  
Camera Angles  
DVD  
DVD  
This unit allows you to select a subtitle language (if available)  
Some DVD may contain scenes which have been shot  
simultaneously from various angles. You can change  
during DVD playback.  
the camera angle if  
appears on the TV screen.  
Press [SUBTITLE] during playback.  
1
If the “ANGLE ICON” is set to “OFF” in “OTHERS” menu,  
will not appear. Refer to pages 20-22.  
1.ENG/6  
SUBTITLE  
PLAY  
Press [ANGLE] during playback.  
Each time you press [SUBTITLE], subtitle language changes as  
example below.  
1
1 / 8  
ANGLE  
OFF  
PLAY  
(no subtitles)  
Each time you press [ANGLE] or [s / B], camera angle changes.  
ENG  
FRE  
(English subtitles)  
Black Level Setting  
(French subtitles)  
DVD  
Adjust the black level to make the dark  
areas of the TV picture brighter.  
To cancel subtitle  
1
Press [MODE] during playback.  
1
ON  
MODE  
Press [SUBTITLE] during playback.  
PLAY  
1.ENG/6  
SUBTITLE  
PLAY  
ENTER  
Press [ENTER] to  
adjust the black level.  
2
OFF  
Press [s / B] to set subtitle to “OFF”.  
2
ON: makes the dark areas brighter.  
OFF: shows the original picture as recorded.  
OFF  
or  
RETURN  
Press [RETURN  
] to exit.  
3
Note:  
• If your language is not shown after pressing [SUBTITLE] several times,  
the disc may not have that language. However, some discs have the  
subtitle language setting on the disc menu. (Operation varies depending  
on the discs, so refer to the manual along with the disc.)  
Stereo Sound Mode  
DVD  
This unit allows you to select a sound mode  
during CD playback.  
• When “NOT AVAILABLE” appears on the TV screen, it means no subtitle  
is recorded on the scene.  
• If you choose a language that has a 3-letter language code, the code will  
be displayed every time you change the subtitle language setting. If you  
choose any other languages, ‘---’ will be displayed instead. Refer to page 24.  
• Some discs will only allow you to change the subtitle from the disc  
menu. Refer to the manual accompanying the discs for details.  
Press [AUDIO ] during CD playback.  
1
STEREO  
AUDIO  
PLAY  
Each time you press [AUDIO], sound mode changes as example below.  
STEREO  
(right and left channels are active)  
Audio Language  
L-ch  
(left channel is active)  
DVD  
R-ch  
(right channel is active)  
This unit allows you to select an audio language (if multiple  
languages are available) during DVD playback.  
Virtual Surround  
Press [AUDIO ] to change audio language.  
1
DVD  
1.ENG Dolby D 3/2.1ch 48k/3  
AUDIO  
PLAY  
You can enjoy stereophonic virtual world on your existing 2  
channel stereo system.  
Each time you press [AUDIO ], the audio language changes as  
example below.  
Press [MODE] twice (once for CD and MP3) during playback.  
1
ENG  
SPA  
FRE  
(English audio)  
(Spanish audio)  
(French audio)  
MODE  
OFF  
PLAY  
Press [ENTER] for the desired effect.  
2
3
ENTER  
1
1: natural effect  
2: emphasized effect  
OFF: no effects (original sound)  
RETURN  
Note:  
Press [RETURN  
] to exit.  
• If your language is not shown after pressing [AUDIO ] several times,  
the disc may not have that language. However, some discs allow audio  
language setting on the disc menu. (Operation varies depending on the  
disc, so refer to the manual along with the disc.)  
• When “OFF” appears on the TV screen, it means audio language is not  
available.  
Note:  
• For audio CD, virtual surround will not be effective if the sound mode is  
set to something other than “STEREO”. Refer to “Stereo Sound Mode”.  
• For DVD when playing back 96kHz with virtual surround function, the  
sound will be down sampled to 48kHz.  
• Some discs will only allow you to change the audio setting from the  
disc menu. Refer to the manual accompanying the discs for details.  
19  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 19  
2009/09/17 13:53:53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DVD  
DVD Setting  
QUICK Menu  
You can select the “PLAYER MENU”, “TV ASPECT”, “PROGRESSIVE” or “DOLBY DIGITAL” from “QUICK” menu quickly.  
1 Press [SETUP] in the stop mode.  
2 Select the desired item.  
or  
SETUP  
STOP  
SETUP  
QUICK  
ENGLISH  
ENTER  
SETUP menu  
A
B
C
P20  
P21  
P21  
Step 5  
Step 5  
Step 5  
PLAYER MENU  
TV ASPECT  
PROGRESSIVE  
DOLBY DIGITAL  
Confirm that “QUICK” is selected.  
4:3 LETTER BOX  
OFF  
BITSTREAM  
SETUP  
QUICK  
CUSTOM  
INITIALIZE  
ENTER  
• Refer to the sections “PLAYER MENU”, “TV ASPECT”,  
“PROGRESSIVE” or “DOLBY DIGITAL” section on page 20 or 21.  
CUSTOM Menu  
You can change the settings of the unit.  
QUICK on pages 20-21 indicates DVD setting menus also accessible from “QUICK” menu.  
1 Press [SETUP] in the stop mode.  
2 Select “CUSTOM”.  
3 Select the desired item.  
ENTER  
SETUP  
STOP  
or  
or  
SETUP menu  
ENTER  
SETUP  
CUSTOM  
SETUP  
SETUP  
LANGUAGE  
DISPLAY  
AUDIO  
PARENTAL  
OTHERS  
QUICK  
CUSTOM  
INITIALIZE  
QUICK  
CUSTOM  
INITIALIZE  
LANGUAGE menu  
OTHERS menu  
DISPLAY menu  
AUDIO menu  
PARENTAL menu  
SETUP  
LANGUAGE  
SETUP  
DISPLAY  
SETUP  
PARENTAL  
SETUP  
OTHERS  
SETUP  
AUDIO  
PASSWORD  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
Please enter a 4-digit password.  
SUBTITLE  
DISC MENU  
PLAYER MENU  
page 20  
page 21  
page 21  
page 22  
page 22  
A
B
C
D
E
LANGUAGE Setting  
Follow steps 1 to 3 in the “CUSTOM Menu” section above.  
A
5 Select the desired language.  
4 Select the desired item.  
ENTER  
6 To exit the menu  
SETUP  
ENTER  
or  
or  
AUDIO: *1 *2  
(Default: ORIGINAL)  
Sets the audio language.  
LANGUAGE menu  
AUDIO  
Note:  
ORIGINAL  
ENGLISH  
FRENCH  
SETUP  
LANGUAGE  
*1  
• Language options are not available  
with some discs.  
AUDIO  
ORIGINAL  
OFF  
ENGLISH  
ENGLISH  
SUBTITLE  
DISC MENU  
PLAYER MENU  
SUBTITLE: *1 *2  
SUBTITLE  
OFF  
ENGLISH  
FRENCH  
(Default: OFF)  
• If “OTHER” is selected on “AUDIO”,  
“SUBTITLE” or “DISC MENU” screen,  
press 4-digit number to enter the code  
for the desired language. Refer to the  
“Language Code List” on page 24.  
• Only the languages supported by the  
disc can be selected.  
Sets the subtitle language.  
DISC MENU: *1  
(Default: ENGLISH)  
Sets the language for DVD  
menu.  
DISC MENU  
ENGLISH  
FRENCH  
Note:  
• In “QUICK” menu, “PLAYER  
MENU”, “TV ASPECT”, “PROGRES-  
SIVE” or “DOLBY DIGITAL” are  
available. “QUICK “ menu consists  
of the setting menu frequently  
used, and they are accompanied  
with QUICK . You can make all  
settings in “CUSTOM” menu.  
SPANISH  
PLAYER MENU: QUICK  
(Default: ENGLISH)  
Sets the language for the  
on-screen display.  
PLAYER MENU  
ENGLISH  
FRANÇAIS  
ESPAÑOL  
*2  
• “LANGUAGE” setting for “AUDIO” and  
“SUBTITLE” are not available with some  
discs. Then use [AUDIO ] and  
[SUBTITLE]. Refer to page 19.  
20  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 20  
2009/09/17 13:53:58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DISPLAY Setting  
B
You can change the display functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
6 To exit “TV ASPECT” or “STILL  
4 Select the desired item.  
5
MODE” menu  
TV ASPECT: QUICK  
(Default: 4:3 LETTER BOX)  
See note on the right.  
Select the  
desired  
setting.  
SETUP  
or  
TV ASPECT  
ENTER  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
4:3 LETTER BOX  
4:3 PAN & SCAN  
16:9 WIDE  
OFF  
To complete  
“PROGRESSIVE” setting  
or  
ENTER  
DISPLAY menu  
ENTER  
SETUP  
DISPLAY  
STILL MODE:  
(Default: AUTO)  
See note on the right.  
Select the  
desired  
setting.  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
STILL MODE  
Note:  
• Select “4:3 LETTER BOX”, so  
that black bars may appear  
on the top and bottom of the  
TV screen.  
ENTER  
TV ASPECT  
STILL MODE  
PROGRESSIVE OFF  
4:3 LETTER BOX  
AUTO  
AUTO  
FIELD  
FRAME  
TV ASPECT:  
or  
ENTER  
Note:  
• Select “4:3 PAN & SCAN” for a  
full height picture with both  
sides adjusted.  
PROGRESSIVE: QUICK  
(Default: OFF)  
PROGRESSIVE:  
• You can set “PROGRESSIVE” to  
“OFF” in “DISPLAY” menu or  
press and hold [PLAY B] on this  
unit for more than 5 seconds  
during playback until the PRO-  
GRESSIVE SCAN indicator on this  
unit turns off.  
• When “PROGRESSIVE” is “ON”,  
video signals from the unit’s  
VIDEO OUT and S-VIDEO OUT  
jacks will be distorted or not be  
output at all.  
See note on the left.  
• Select “16:9 WIDE” if a wide-  
screen TV is  
TV ASPECT  
STILL MODE  
PROGRESSIVE  
4:3 LETTER BOX  
AUTO  
OFF  
4:3 LETTER BOX  
AUTO  
ON  
SETUP  
connected to this unit.  
STILL MODE:  
• Select “AUTO” usually.  
• If you select “AUTO”, it  
automatically selects the  
best resolution setting  
(“FRAME” or “FIELD”) based  
on the data characteristics of  
the pictures. (default)  
• If you select “FIELD”, the  
picture in the still mode will  
be stabilized.  
ENTER  
If there is no picture  
or you do not press  
any buttons for 15  
seconds, “PROGRES-  
SIVE” will switch to  
“OFF” and it will exit  
the “SETUP” menu.  
Before proceeding…  
Select “Yes”.  
1. Make sure your TV has progressive scan.  
2. Connect with component video cable  
NOTE: If there is no picture or picture is  
distorted after selecting ‘YES’,  
wait about 15 seconds for auto recovery.  
or  
Activate Progressive?  
NO  
YES  
SELECT:  
K
/
L
SET:ENTER  
• If you select “FRAME”, the  
picture in the still mode will  
be highly defined.  
• An individual picture on  
the TV screen is called a  
“frame”, which consists of  
two separate images called  
as “field”.  
• Some pictures may be  
blurred if you select “AUTO”  
in the still mode due to their  
data characteristics.  
Note:  
ENTER  
• In “QUICK” menu, “PLAYER  
MENU”, “TV ASPECT”,  
“PROGRESSIVE” or “DOLBY  
DIGITAL” are available. “QUICK”  
menu consists of the setting  
menu frequently used, and they  
are accompanied with QUICK  
You can make all settings in  
“CUSTOM” menu.  
Select “Yes”.  
Confirm again to use progressive scan.  
If Picture is good, select ‘YES’.  
or  
NO  
YES  
.
SET:ENTER  
SELECT:  
K
/
L
AUDIO Setting  
C
Choose the appropriate audio setting for your device. It only affects during the playback of DVD discs. Follow steps 1 to 3 in the  
“CUSTOM Menu” section on page 20.  
5
6 To exit the menu  
4 Select the desired item.  
DRC (Dynamic Range Control):  
SETUP  
(Default: ON)  
Set to “ON” to compress the range between soft and loud sounds.  
or  
DRC  
ON  
OFF  
DOWN SAMPLING ON  
ON  
DOLBY DIGITAL  
BITSTREAM  
BITSTREAM  
Note:  
ENTER  
DRC:  
AUDIO menu  
• This function is available  
only on the discs which are  
recorded in the Dolby Digital  
format.  
DOWN SAMPLING:  
(Default: ON)  
SETUP  
AUDIO  
Set to “ON” when outputting in 48kHz.  
DRC  
ON  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
Set to “OFF” when outputting the original sound.  
DOWN SAMPLING:  
• When playing back a 96kHz  
disc with the copyright  
protection, or when virtual  
surround is set to “1” or “2”,  
the sound will be down  
sampled at 48kHz even if the  
“DOWN SAMPLING” is set to  
“OFF”.  
DRC  
ON  
ON  
OFF  
BITSTREAM  
DOWN SAMPLING ON  
DOLBY DIGITAL  
BITSTREAM  
ENTER  
DOLBY DIGITAL: QUICK  
(Default: BITSTREAM)  
Set to “BITSTREAM” when the unit is connected to a Dolby Digital decoder.  
BITSTREAM: outputs Dolby Digital signals.  
PCM: converts the Dolby Digital into PCM (2 channel).  
Note:  
• In “QUICK” menu, “PLAYER  
MENU”, “TV ASPECT”,  
This function is available only  
on digital outputting of a disc  
recorded in 96kHz.  
“PROGRESSIVE” or “DOLBY  
DIGITAL” are available. “QUICK”  
menu consists of the setting  
menu frequently used, and they  
DRC  
DOWN SAMPLING ON  
DOLBY DIGITAL BITSTREAM  
ON  
ON  
ON  
PCM  
are accompanied with QUICK  
You can make all settings in  
“CUSTOM” menu.  
.
ENTER  
21  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 21  
2009/09/17 13:54:01  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARENTAL Setting  
D
This function prevents unit from playing material inappropriate for children.  
Parental Levels  
Parental level allows you to set the rating levels of your DVD software. Playback will stop if the ratings exceed the levels you set. Follow  
steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4 Enter your desired 4-digit  
5 Select “PARENTAL  
6 Select the desired level.  
7 To exit the menu  
password (expect for 4737).  
LEVEL”.  
SETUP  
1
4
7
2
5
8
0
3
6
or  
or  
ENTER  
ENTER  
ENTER  
PARENTAL LEVEL  
ALL  
9
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
8 [ADULT]  
7 [NC-17]  
6 [R]  
+10  
PARENTAL menu  
CONTROL LEVELS  
• ALL:  
SETUP  
PARENTAL  
all parental locks are canceled.  
PASSWORD  
• Level 8:  
DVD software of any grades (adult/general/children) can be played back.  
Please enter a 4-digit password.  
• Levels 7 to 2:  
• Level 1:  
only DVD software intended for general use and children can be played back.  
only DVD software intended for children can be played back, with those intend-  
ed for adult and general use prohibited.  
TIPS FOR LEVELS  
• 8 [ADULT]:  
• 7 [NC-17]:  
or  
DVD software of any grades (adult/general/children) can be played back.  
no one under 17 admitted  
If you have set a password  
already, enter the current 4-digit  
password.  
• 6 [R]: restricted; under 17 requires accompanying parent or adult guardian  
• 5 [PGR]:  
• 4 [PG13]:  
• 3 [PG]:  
parental guidance recommended  
unsuitable for children under 13  
parental guidance suggested  
general audience  
SETUP  
PARENTAL  
• 2 [G]:  
PASSWORD  
• 1 [KID SAFE]:  
suitable for children  
Enter current password.  
Note:  
• Some DVD-video may not respond to “PARENTAL“ setting. Make sure this function works with  
your DVD-video.  
To Change the Password for Parental Controls  
You can change your password for parental controls. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4 Enter current 4-digit password.  
5 Select “PASSWORD  
6 Enter your new  
4-digit password (except  
for 4737).  
7 To exit the menu  
CHANGE”.  
SETUP  
1
4
7
2
5
8
0
3
6
or  
1
4
7
2
5
8
0
3
6
ENTER  
ENTER  
9
Note:  
9
PARENTAL LEVEL  
PASSWORD CHANGE  
ALL  
+10  
• Record the password in  
case you forget it.  
+10  
• If you forget the  
PARENTAL menu  
password, press [4],  
[7], [3], [7] at step 4,  
then enter your new  
password. Password will  
be cleared and parental  
levels will be set to “ALL”.  
SETUP  
PASSWORD  
Please enter a 4-digit password.  
PARENTAL  
SETUP  
PARENTAL  
PASSWORD  
Enter current password.  
OTHERS Setting  
E
You can change the other functions. Follow steps 1 to 3 in the “CUSTOM Menu” section on page 20.  
4 Select the desired item.  
5
6 To exit the menu  
ANGLE ICON:  
SETUP  
(Default: ON)  
Set to “ON” to display  
when multiple camera angles are  
available during DVD playback.  
or  
OFF  
ON  
ANGLE ICON  
AUTO POWER OFF ON  
ON  
ENTER  
OTHERS menu  
SETUP  
OTHERS  
AUTO POWER OFF:  
(Default: ON)  
ANGLE ICON  
AUTO POWER OFF  
ON  
ON  
Set to “ON” to turn this unit off automatically after 30 minutes of  
no use.  
ANGLE ICON  
ON  
ON  
AUTO POWER OFF ON  
OFF  
ENTER  
22  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 22  
2009/09/17 13:54:03  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reset to the Default Setting (Except for PARENTAL Setting)  
1 Press [SETUP] in the  
2 Select “INITIALIZE”.  
3 Select “YES”.  
4 To exit the menu  
stop mode.  
SETUP  
SETUP  
ENTER  
ENTER  
STOP  
or  
or  
SETUP menu  
Press  
twice.  
Note:  
SETUP  
SETUP  
INITIALIZE  
SETUP  
When you do not wish  
to initialize, select  
“NO” at step 3.  
QUICK  
CUSTOM  
INITIALIZE  
Initialize?  
NO  
YES  
QUICK  
CUSTOM  
INITIALIZE  
INFORMATION  
Troubleshooting Guide  
If this unit does not perform properly when operated as instructed in this manual. Refer to the following:  
Problem  
Corrective action  
No power.  
• Make sure the power plug is connected to an AC outlet.  
• Make sure the power is turned on.  
This unit does not respond to the  
remote control.  
• Check if the power plug is connected to an AC outlet.  
• Check the batteries in the remote control.  
Aim the remote control directly at the infrared sensor window. If necessary, remove all the obstacles between the sensor and the remote control.  
• You have to be within 23 feet (7m) of this unit.  
• Check if a cassette tape is in this unit.  
• Tune your radio to an empty AM station so that you hear a lot of static. Turn up the volume, then if you hear some signal sound from  
the radio in response to your pressing buttons on the remote control, the remote control is working.  
• Press and hold any button on remote control toward a digital camera. The remote control is working if you confirm infrared light  
through the digital camera.  
Poor picture or noise.  
• Interference signal may be received. Change the position and direction of the unit.  
Cannot record a TV program.  
• This unit does not have a tuner to receive TV broadcasting.  
• You must connect this unit to TV with audio/video output jacks or an external tuner to record TV programs. Refer to “Recording & One  
-touch Timer Recording (OTR)” on page 12 and “Satellite Link” on page 14.  
Timer recording is impossible.  
• Make sure the timer program is set correctly.  
• Make sure indicator on this unit lights up. If not, press [T-SET].  
• Make sure the VCR clock is set correctly.  
Cannot go into record mode.  
• Make sure the cassette tape has a record tab. If needed, cover the hole with adhesive tape.  
• Activate this unit in VCR mode. Press [VCR  
] on the remote control so that the VCR OUTPUT light will illuminate.  
Playback picture is partially noisy.  
Adjust tracking control for a better picture by pressing [TRACKING L / K]] on the unit or [TRACKING K / L] on the remote control.  
Cannot view a picture but the  
audio is OK.  
• Head cleaning may be necessary. Refer to “Auto Head Cleaning”.  
• Make sure the VCR is not in the VCR menu mode.  
No or poor, playback picture.  
• Fine tune your TV.  
Video or color fades in and out when • You cannot copy a copyrighted cassette tape.  
making a copy of a cassette tape.  
Cannot remove the cassette tape. • Check if this unit is in the VCR mode. If not, press [VCR  
] on the remote control to switch the mode.  
No picture.  
• Connect the video cable firmly.  
• Insert a correct video disc that can be played back on this unit.  
• Press [DVD ] on the remote control. Check if the DVD OUTPUT light will illuminate. Then try other DVD features.  
• Set “PROGRESSIVE” correctly in “DISPLAY” menu. Turn it on only if your TV has progressive scan and you are using the component video  
connections between the unit and the TV. Disable progressive scan for all other connections. Refer to page 6.  
Disc cannot be played back.  
No sound.  
• Insert the disc.  
• Clean the disc.  
• Place the disc correctly with the label side up.  
• Cancel the parental lock or change the control levels.  
• Handle a disc with special care so that it does not have fingerprints, scratches, or dusts on its surface.  
• Connect the audio cables firmly.  
• Turn on the power of the audio component.  
• Correct the audio output settings.  
• Correct the input settings on the audio component.  
No DTS audio is output.  
Distorted picture.  
• This unit does not support DTS audio.  
-This is not a malfunction.  
• Connect this unit directly to the TV.  
• There are some cases where pictures may be slightly distorted, and those are not a sign of a malfunction.  
• Although pictures may stop for a moment, this is not a malfunction. Refer to page 15.  
• Check if the progressive mode is set correctly according to your TV. Refer to pages 20-21.  
Audio or subtitle language does  
not match the setting.  
• The selected language is not available for audio or subtitles on the DVD.  
-This is not a malfunction.  
The camera angle cannot be  
changed.  
• The DVD does not contain sequences recorded from different camera angles.  
-This is not a malfunction.  
Audio or subtitle language  
cannot be changed.  
• The DVD does not contain audio source or subtitles in the selected language.  
-This is not a malfunction.  
” appears on the TV screen,  
• That operation is prohibited by this unit or the disc.  
-This is not a malfunction.  
prohibiting an operation.  
• Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for details on correct operations.  
• Playback from a desired track and random playback are not available during programmed playback.  
• Some functions are prohibited on some discs.  
23  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 23  
2009/09/17 13:54:05  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
• Designs and specifications are subject to  
change without notice.  
• If there is a discrepancy between  
languages, the default language will be  
English.  
Video heads :  
Operating temperature :  
41°F (5°C) to 104°F (40°C)  
Dimensions :  
4-heads  
Output signal format :  
NTSC color  
W : 17 3/16”  
(435mm)  
(94mm)  
H
D
: 3 3/4”  
: 9 3/16”  
Power source :  
(233mm)  
120 V AC +/- 10%, 60Hz +/- 0.5%  
Power consumption :  
16W (standby : 2.8W)  
Weight :  
Approx 5.8lbs (2.6kg)  
Language Code List  
Language  
Code  
Language  
French [FRE]  
Frisian  
Code  
Language  
Macedonian  
Malagasy  
Malay  
Code  
Language  
Siswat  
Slovak  
Slovenian [SLO]  
Somali  
Code  
A-B  
5264  
5271  
5358  
5747  
5051  
5158  
5758  
5360  
5367  
5447  
5569  
5455  
5467  
5957  
5953  
5965  
5958  
5966  
5955  
5964  
5961  
5960  
6047  
6051  
6061  
6565  
6557  
6558  
6561  
5165  
6567  
6569  
6568  
Abkhazian  
Afar  
Afrikaans  
Albanian  
Amharic  
Arabic  
Armenian  
Assamese  
Aymara  
Azerbaijani  
Bashkir  
Basque  
Bengali;Bangla  
Bhutani  
Bihari  
Bislama  
Breton  
4748  
4747  
4752  
6563  
4759  
4764  
5471  
4765  
4771  
4772  
4847  
5167  
4860  
5072  
4854  
4855  
4864  
4853  
5971  
4851  
Galician  
Georgian  
German [GER]  
Greek [GRE]  
Greenlandic  
Guarani  
Gujarati  
Hausa  
Hebrew  
Malayalam  
Maltese  
Maori  
Spanish [SPA]  
Sundanese  
Swahili  
Marathi  
Moldavian  
Mongolian  
Nauru  
Swedish [SWE]  
T
Tagalog  
Tajik  
Tamil  
Tatar  
Telugu  
Thai  
Tibetan  
Tigrinya  
Tonga  
Tsonga  
Turkish [TUR]  
Turkmen  
Twi  
6658  
6653  
6647  
6666  
6651  
6654  
4861  
6655  
6661  
6665  
6664  
6657  
6669  
Nepali  
Norwegian [NOR]  
Hindi  
Hungarian [HUN]  
O-R  
I-K  
Occitan  
Oriya  
6149  
6164  
6159  
6247  
6265  
5247  
6258  
6266  
6367  
6459  
6461  
6467  
Icelandic [ICE]  
Indonesian  
Interlingua  
Interlingue  
Inupiak  
5565  
5560  
5547  
5551  
5557  
5347  
5566  
5647  
5669  
5760  
5765  
5757  
6469  
5771  
6460  
5761  
5767  
Oromo(Afan)  
Panjabi  
Pashto;Pushto  
Persian  
Bulgarian [BUL]  
Burmese  
Byelorussian  
Irish [IRI]  
Polish [POL]  
Portuguese [POR]  
Quechua  
Italian [ITA]  
Japanese [JPN]  
Javanese  
C-E  
Cambodian  
Catalan  
5759  
4947  
7254  
4961  
5464  
4965  
5047  
6058  
5160  
5161  
5166  
Rhaeto-Romance  
Romanian [RUM]  
Russian [RUS]  
U-Z  
Kannada  
Kashmiri  
Kazakh  
Kinyarwanda  
Kirghiz  
Kirundi  
Korean [KOR]  
Kurdish  
Ukrainian  
Urdu  
Uzbek  
Vietnamese  
Volapuk  
Welsh  
Wolof  
Xhosa  
6757  
6764  
6772  
6855  
6861  
4971  
6961  
7054  
5655  
7161  
7267  
Chinese [CHI]  
Corsican  
S
Croatian  
Samoan  
Sangho  
Sanskrit  
Scots Gaelic  
Serbian  
Serbo-Croatian  
Sesotho  
6559  
6553  
6547  
5350  
6564  
6554  
6566  
6660  
6560  
6550  
6555  
Czech [CZE]  
Danish [DAN]  
Dutch [DUT]  
English [ENG]  
Esperanto  
Estonian  
L-N  
Yiddish  
Yoruba  
Zulu  
Laothian  
Latin  
Latvian;Lettish  
Lingala  
Lithuanian  
5861  
5847  
5868  
5860  
5866  
F-H  
Setswana  
Shona  
Sindhi  
Faroese  
Fiji  
Finnish [FIN]  
5261  
5256  
5255  
Singhalese  
If you choose a Language that has a 3-letter language code, the code will be displayed every time you change the audio or subtitle language setting on page 19. If you choose any  
other languages, ‘---’ will be displayed instead. (3-letter language code is written in bracket.)  
LIMITED WARRANTY  
FUNAI CORP. will repair this product, free of charge in the USA in the event of defect  
ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY,  
AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI  
AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS  
AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS  
WARRANTY IS VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE  
CENTER.  
in materials or workmanship as follows:  
DURATION:  
PARTS:  
FUNAI CORP. will provide parts to replace defective parts without  
charge for one (1) year from the date of original retail purchase. Certain  
parts are excluded from this warranty.  
FUNAI CORP. will provide the labor without charge for a period of  
ninety (90) days from the date of original retail purchase.  
IMPORTANT:  
LABOR:  
THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE  
OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING  
THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE  
REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.  
LIMITS AND EXCLUSIONS:  
This warranty is extended only to the original retail purchaser. A purchase receipt  
or other proof of original retail purchase will be required together with the product  
to obtain service under this warranty.  
ATTENTION:  
FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT  
WITHOUT PRIOR NOTICE.  
This warranty shall not be extended to any other person or transferee.  
This warranty is void and of no effect if any serial numbers on the product are  
altered, replaced, defaced, missing or if service was attempted by an unauthorized  
service center. This limited warranty does not apply to any product not purchased  
and used in the United States.  
This product is produced for home use and this warranty only covers failures due  
to defects in material or workmanship which occurs during normal use. It does not  
cover damage which occurs in shipment, or failures which are caused by repairs,  
alterations or product not supplied by FUNAI CORP., or damage which results from  
accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation,  
improper maintenance, commercial use such as hotel, rental or office use of this  
product or damage which results from fire, flood, lightning or other acts of God.  
WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS:  
To obtain warranty service, you must take the product, or deliver the product  
freight prepaid, in either its original packaging or packaging affording an equal  
degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not  
reimburse you for any service done by unauthorized service providers without  
prior written approval.  
To locate your nearest AUTHORIZED SERVICE CENTER or for general service  
inquiries, please contact us at:  
THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES  
(EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS,  
DEMO OR FLOOR MODELS.  
FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE  
LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING  
OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS  
PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES,  
EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI,  
FUNAI SERVICE CORPORATION  
Tel: 1-800-968-3429  
2200 Spiegel Drive, Groveport, OH 43125  
24  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 24  
2009/09/17 13:54:08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Conexiones  
Ajuste del reloj  
5
1
VCR  
Consulte la “Basic TV Connection” en la página delantera antes  
de utilizar esta unidad.  
Pulse [SETUP] para seleccionar “AJUSTE DE RELOJ”.  
A continuación, pulse [B] para ir al siguiente paso.  
1
Instalación de las pilas del control remoto  
2
- M E N U -  
PROGRAMAR  
SETUP  
CONEXIÓN SATÉLITAL  
AUTOREPETIR [OFF]  
AJUSTE DE RELOJ  
SELEC. IDIOMA  
o
1
2
3
B
• Si no se ha ajustado el reloj, aparece la pantalla “AJUSTE DE  
RELOJ” cuando pulse [SETUP]. En este caso, vaya al paso 2.  
Seleccione el mes actual.  
A continuación, pulse [B] para ir al siguiente paso.  
2
3
4
5
6
Conmutación VCR/DVD  
3
AJUSTE DE RELOJ  
OPEN/CLOSE  
MES  
1 0  
DIA  
- -  
AÑO  
- - - -  
POWER  
OPEN/CLOSE  
TRACKING  
/
SPEED  
T-SET  
OUTPUT  
o
VCR  
DVD PROGRESSIVE SCAN  
STOP PLA  
Y
SKIP  
H
G
SKIP  
TRACKING  
HORA MINUTO  
- - - -  
AM/PM  
- -  
1
4
7
2
5
8
3
6
9
REV  
FWD  
:
CLEAR/  
INPUT  
SELECT  
C. RESET  
0
VCR  
+10  
DVD  
Botón VCR  
Botón DVD  
DISPLAY  
MODE  
Seleccione el dia actual.  
A continuación, pulse [B] para ir al siguiente paso.  
PLAY  
STOP  
SKIP  
OUTPUT  
Botón OUTPUT  
D
REC/OTR  
PAUSE  
AUDIO  
VCR  
DVD  
AJUSTE DE RELOJ  
DIA  
SEARCH  
MODE  
TOP MENU  
MENU  
S
Luz DVD OUTPUT  
Luz VCR OUTPUT  
ENTER  
MES  
1 0  
AÑO  
- - - -  
/
0 6  
SETUP  
ZOOM  
RETURN  
A-B  
o
SUBTITLE  
ANGLE  
REPEAT  
HORA MINUTO  
- - - -  
AM/PM  
- -  
:
Seleccione el año actual.  
A continuación, pulse [B] para ir al siguiente paso.  
MODO VCR  
AJUSTE DE RELOJ  
DIA  
MES  
1 0  
AÑO  
2 0 0 9  
Pulse [VCR ] en el control remoto. (Compruebe que está  
encendida la luz VCR OUTPUT.)  
/
0 6  
o
HORA MINUTO  
- - - -  
AM/PM  
- -  
:
MODO DVD  
Pulse [DVD ] en el control remoto. (Compruebe que está  
encendida la luz DVD OUTPUT.)  
Seleccione la hora actual.  
A continuación, pulse [B] para ir al siguiente paso.  
AJUSTE DE RELOJ  
DIA  
MES  
1 0  
AÑO  
/
0 6 MAR 2 0 0 9  
Activación de la unidad por primera vez  
4
o
HORA MINUTO  
0 5 - -  
AM/PM  
- -  
:
VCR  
Seleccione los minutos actuales.  
A continuación, pulse [B] para ir al siguiente paso.  
Asegúrese de que la entrada de su TV esté en VIDEO.  
(El nombre puede cambiar según el fabricante del TV.  
Consulte el manual de su TV para conocer más detalles.)  
1
2
AJUSTE DE RELOJ  
DIA  
MES  
1 0  
AÑO  
/
0 6 MAR 2 0 0 9  
Seleccione su idioma la primera vez que encienda esta unidad.  
A continuación, pulse [B] para ir al siguiente paso.  
SELEC. IDIOMA  
o
HORA MINUTO  
AM/PM  
- -  
0 5  
:
4 0  
POWER  
ENGLISH  
FRANCAIS  
ESPAÑOL  
o
Seleccione “AM” o “PM”.  
AJUSTE DE RELOJ  
DIA  
B
[ON]  
7
8
MES  
1 0  
AÑO  
/
0 6 MAR 2 0 0 9  
o
HORA MINUTO  
0 5 4 0  
AM/PM  
P M AM  
B PM  
:
Cuando “AJUSTE DE RELOJ” aparesca,  
avance al segundo paso de “Ajuste del reloj”  
en esta pagina.  
3
AJUSTE DE RELOJ  
MES  
1 0  
DIA  
- -  
AÑO  
- - - -  
/
Presione [SETUP] para salir del menú “AJUSTE DE RELOJ”.  
HORA MINUTO  
- - - -  
AM/PM  
- -  
o
:
SETUP  
25  
ES  
E8E0AUD_DV220SL8A_EN_v1.indd 25  
2009/09/17 13:54:08  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Español  
Modo DVD  
Modo de grabadora de video  
Reproducción de la  
grabadora de vídeo  
6
Soporte  
Botón  
(Orden alfavético)  
1
4
7
2
5
8
0
3
6
Antes:  
• Para seleccionar directamente el • Para seleccionar directamente la  
capítulo o el título.  
canción.  
9
Encienda el televisor.  
+10  
VCR  
• Para buscar en avance/  
retroceso en un disco.  
• Para empezar la reproducción en  
avance/retroceso lento durante el  
modo de pausa.  
• Para el avance/retroceso de una  
cinta.  
• Para empezar la reproducción en  
avance lento durante el modo de  
pausa.  
• Para buscar en avance/  
retroceso en un disco.  
Inserte un casete  
de vídeo en esta  
unidad.  
Para empezar la  
reproducción  
1
2
4
A-B  
• Para repetir entre los puntos A y B • Para repetir entre los puntos A y B  
elegidos.  
elegidos. (CD)  
ANGLE  
AUDIO  
• Para seleccionar los ángulos de la  
cámara en un disco.  
PLAY  
• Para seleccionar el idioma de  
audio en un disco.  
• Para seleccionar “ESTÉREO”,  
“L-ch” o “R-ch”. (CD)  
• Para borrar los marcadores. (CD)  
• Para eliminar el Nº de estado en la  
entrada de programa.  
Para parar la  
reproducción  
Para expulsar  
• Para borrar los marcadores.  
• Para borrar los números  
mal entrados.  
• Para borrar el punto para la  
repetición A-B.  
3
CLEAR/  
C. RESET  
• Para salir del menú de la  
grabadora de vídeo.  
• Para reponer el contador de cinta.  
• Para borrar los números  
mal entrados.  
OPEN/CLOSE  
• Para borrar el punto para la  
repetición A-B. (CD)  
STOP  
DISPLAY  
DVD  
• Para indicar el modo de disco  
actual.  
• Para indicar el modo de disco  
actual.  
• Para indicar la hora actual, conta-  
dor de cinta y L1 o L2.  
• Para seleccionar el modo de salida  
de DVD.  
• Para activar el mando a  
distancia en el modo DVD.  
• Para seleccionar el modo de salida  
de DVD.  
• Para activar el modo DVD.  
Reproducción de DVD/CD  
7
• Para seleccionar un  
ítem en el menú de la  
grabadora de vídeo.  
• Para avanzar al  
siguiente menú de la  
grabadora de vídeo.  
• Para volver un paso  
durante el ajuste del  
reloj y temporizador.  
Antes:  
ENTER  
Encienda el televisor, amplificador y otros  
equipos que puedan estar conectados a  
esta unidad. Asegúrese que el televisor y  
el sintoamplificador de audio están en el  
canal correcto.  
• Para mover el cursor y  
determinar su posición.  
• Para mover el cursor y  
determinar su posición.  
INPUT  
SELECT  
• Para seleccionar L1 o L2.  
MENU  
MODE  
• Para llamar la lista de archivo.  
• Para llamar el menu en un disco.  
(MP3)  
• Para activar/desactivar el nivel del • Para disponer el orden de reproduc-  
negro. ción o la reproducción aleatoria.  
• Para activar/desactivar el ambien- • Para activar/desactivar el envol-  
tal virtual. vente virtual.  
DVD  
OPEN/CLOSE  
PAUSE  
• Para abrir o cerrar la bandeja del • Para abrir o cerrar la bandeja del • Para expulsar la cinta de casete del  
Ponga un disco  
con la etiqueta  
hacia arriba.  
disco.  
disco.  
compartimiento del casete.  
1
2
4
• Para hacer una pausa de repro-  
ducción del disco.  
• Para avanzar la reproducción un  
cuadro a la vez.  
• Para hacer una pausa de la  
• Para hacer una pausa en la repro- reproducción o grabación de la cinta.  
OPEN/CLOSE  
POWER  
ducción del disco.  
• Para avanzar la reproducción un  
cuadro a la vez.  
• Para empezar la reproducción del • Para empezar la reproducción del • Para empezar la reproducción de  
PLAY  
disco.  
disco.  
la cinta.  
• Para encender o para pasar la  
• Para encender o para pasar la  
• Para encender o para pasar la  
POWER  
unidad al modo de espera. (Para  
unidad al modo de espera. (Para  
unidad al modo de espera. (Para  
apagar completamente la unidad, apagar completamente la unidad, apagar completamente la unidad,  
debe desconectar el cable de  
alimentacion de CA.)  
debe desconectar el cable de  
alimentacion de CA.).  
debe desconectar el cable de  
alimentacion de CA.)  
Para empezar la  
reproducción  
Para parar la  
reproducción  
3
REC/OTR  
REPEAT  
RETURN  
• Para empezar una grabaciòn  
una grabaciòn de un toque.  
o
• Para reproducir repetidamente  
STOP  
• Para reproducir repetidamente un una canción o disco. (CD)  
• Para activar/desactivar el modo de  
repetición.  
PLAY  
capítulo o título.  
• Para reproducir repetidamente una  
canción, grupo o disco. (MP3)  
• Para volver a la operación previa • Para volver a la operación previa  
en el menú.  
en el menú.  
• Para buscar un capítulo, título u  
hora.  
• Para buscar una canción.  
• Para buscar el tiempo. (CD)  
• Para colocar o buscar los  
marcadores. (CD)  
SEARCH  
MODE  
• Para llamar el menú de búsqueda  
de índice u hora.  
Control remoto  
8
• Para colocar o buscar los  
marcadores.  
SETUP  
SKIP  
• Para llamar el menú de  
programación de DVD.  
• Para llamar el menú de  
programación de DVD.  
• Para llamar el menú de la graba-  
dora de vídeo.  
POWER  
OPEN/CLOSE  
SPEED  
T-SET  
1
4
7
2
5
8
3
6
9
• Para saltar capítulos o titulo.  
• Para saltar canciones.  
TRACKING  
SPEED  
• Para seleccionar la velocidad de  
grabación.  
CLEAR/  
INPUT  
SELECT  
C. RESET  
0
VCR  
+10  
DVD  
• Para parar la reproducción o gra-  
bación.  
DISPLAY  
MODE  
STOP  
• Para parar la reproducción.  
• Para parar la reproducción.  
SUBTITLE  
PLAY  
• Para seleccionar subtítulos en un  
disco.  
STOP  
SKIP  
REC/OTR  
TOP MENU  
MENU  
PAUSE  
AUDIO  
TOP MENU  
• Para volver al archivo superior de  
la jerarquía más alta en el programa  
y en la lista de archivo.(MP3)  
• Para llamar el menú superior en  
un disco.  
SEARCH  
MODE  
ENTER  
TRACKING  
TRACKING  
• Para ajustar manualmente  
elseguimiento durante la repro-  
ducción.  
SETUP  
ZOOM  
RETURN  
A-B  
SUBTITLE  
ANGLE  
REPEAT  
T-SET  
• Para poner la grabadora de vídeo  
en el modo de espera para una  
grabación con temporizador.  
• Para seleccionar el modo de salida  
de la grabadora de vídeo.  
• Para activar el modo de la graba-  
dora de vídeo.  
VCR  
ZOOM  
• Para ampliar parte de la  
imagen. (2x/4x)  
26  
ES  
E8E0AUD_DV220SL8A_EN_v1.indd 26  
2009/09/17 13:54:11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
Clock Setting  
Connections  
Please refer to “Basic TV Connection” on the front page before  
you use this unit.  
1
5
VCR  
Press [SETUP] and select “CLOCK SET“.  
- M E N U -  
1
TIMER PROGRAMMING  
SATELLITE LINK  
Then press [B] to go to next step.  
Installing the Batteries for the Remote Control  
AUTO REPEAT [OFF]  
CLOCK SET  
2
B
SETUP  
LANGUAGE SELECT  
or  
1
2
3
• If the clock is not set, “CLOCK SET” menu appears when you press  
[SETUP]. In this case, go to step 2.  
Select the current month.  
Then press [B] to go to next step.  
CLOCK SET  
2
3
4
5
6
7
8
MONTH DAY  
1 0 - -  
YEAR  
/
- - - -  
HOUR MINUTE  
AM/PM  
- -  
- -  
:
- -  
or  
VCR/DVD Switching  
3
OPEN/CLOSE  
POWER  
OPEN/CLOSE  
TRACKING  
SPEED  
T-SET  
Select the current day.  
Then press [B] to go to next step.  
OUTPUT  
CLOCK SET  
VCR  
DVD PROGRESSIVE SCAN  
STOP PLA  
Y
SKIP  
H
G
SKIP  
TRACKING  
1
4
7
2
5
8
3
6
9
REV  
FWD  
MONTH DAY  
1 0 0 6  
YEAR  
- - - -  
/
CLEAR/  
INPUT  
SELECT  
HOUR MINUTE  
AM/PM  
- -  
C. RESET  
or  
0
VCR  
+10  
DVD  
- -  
:
- -  
VCR button  
DVD button  
DISPLAY  
MODE  
PLAY  
STOP  
SKIP  
OUTPUT  
OUTPUT button  
D
REC/OTR  
PAUSE  
AUDIO  
Select the current year.  
Then press [B] to go to next step.  
CLOCK SET  
VCR  
DVD  
SEARCH  
MODE  
TOP MENU  
MENU  
S
MONTH DAY  
1 0 0 6  
YEAR  
DVD OUTPUT light  
VCR OUTPUT light  
ENTER  
/
TUE 2 0 0 9  
SETUP  
ZOOM  
RETURN  
A-B  
HOUR MINUTE  
- - - -  
AM/PM  
- -  
SUBTITLE  
ANGLE  
REPEAT  
or  
:
Select the current hour.  
Then press [B] to go to next step.  
CLOCK SET  
MONTH DAY  
1 0 0 6  
YEAR  
VCR MODE  
/
TUE 2 0 0 9  
HOUR MINUTE  
0 5 - -  
AM/PM  
- -  
Press [VCR ] on the remote control.  
(The VCR OUTPUT light illuminates.)  
:
or  
DVD MODE  
Select the current minute.  
Then press [B] to go to next step.  
CLOCK SET  
Press [DVD ] on the remote control.  
(The DVD OUTPUT light illuminates.)  
MONTH DAY  
1 0 0 6  
YEAR  
/
TUE 2 0 0 9  
HOUR MINUTE  
0 5 4 0  
AM/PM  
- -  
:
or  
Turning on Unit for the First Time  
4
Select “AM” or “PM”.  
CLOCK SET  
VCR  
MONTH DAY  
1 0 0 6  
YEAR  
/
TUE 2 0 0 9  
HOUR MINUTE  
0 5 4 0  
AM/PM  
P M AM  
B PM  
or  
:
Be sure your TV’s input is set to VIDEO. (Name may  
vary with TV manufacturer. See your TV manual for  
details.)  
1
2
Press [SETUP] to exit the “CLOCK SET” menu.  
Press [K / L] to select your on-screen language.  
SETUP  
Then press [B] to continue.  
LANGUAGE SELECT  
B
ENGLISH  
FRANCAIS  
ESPAÑOL  
[ON]  
POWER  
or  
When “CLOCK SET” menu appears,  
go to step 2 in “Clock Setting” on this page.  
CLOCK SET  
3
MONTH DAY  
1 0 - -  
YEAR  
- - - -  
/
HOUR MINUTE  
- - - -  
AM/PM  
- -  
:
or  
27  
EN  
E8E0AUD_DV220SL8A_EN_v1.indd 27  
2009/09/17 13:54:14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Use Guide  
DVD mode  
VCR mode  
VCR Playback  
6
Media  
Button  
(Alphabetical order)  
Before:  
Turn on the TV.  
1
4
7
2
5
8
0
3
6
VCR  
• To select chapter or title  
directly.  
• To select track or file directly.  
9
+10  
• To search forward/backward  
through a disc.  
Insert a cassette  
tape into this unit.  
To start playback  
1
3
2
4
• To forward/backward a tape.  
• To begin slow forward  
playback in the pause mode.  
• To search forward/backward  
through a disc.  
• To begin slow forward/reverse  
playback in the pause mode.  
A-B  
• To repeat between your chosen • To repeat between your  
point of A and B.  
chosen point of A and B. (CD)  
PLAY  
ANGLE  
AUDIO  
• To select camera angles on a  
disc.  
To stop playback  
To eject the  
cassette tape  
• To select audio languages on a • To select “STEREO”, “L-ch” or  
disc.  
“R-ch”. (CD)  
• To clear the markers. (CD)  
• To remove status number in  
program input.  
OPEN/CLOSE  
• To clear the markers.  
• To clear numbers entered  
incorrectly.  
• To cancel the point for A-B  
repeat.  
STOP  
CLEAR/  
C. RESET  
• To exit the VCR menu.  
• To reset the tape counter.  
• To clear numbers entered  
incorrectly.  
• To cancel the point for A-B  
repeat. (CD)  
DISPLAY  
DVD  
DVD/CD Playback  
• To display the current disc  
mode.  
• To display the current disc  
mode.  
• To display the current time,  
tape counter, and L1 or L2.  
7
Before:  
• To select DVD output mode.  
• To activate DVD mode.  
• To select the DVD output mode.  
• To activate DVD mode.  
Turn on the TV, amplifier and any other  
components which are connected to  
this unit. Make sure the TV and audio  
receiver are set to the correct channel.  
• To select an item on  
the VCR menu.  
ENTER  
• To advance to the  
next VCR menu.  
• To move the cursor and deter- • To move the cursor and deter-  
mine its position.  
mine its position.  
• To go back one step  
during clock and  
timer programming.  
INPUT  
SELECT  
• To select input L1 or L2.  
DVD  
MENU  
MODE  
• To call up the disc menu on a  
disc.  
• To call up the file list. (MP3)  
Insert a disc with  
label facing up.  
1
2
4
• To arrange the playing order or  
play randomly.  
• To set virtual surround on/off.  
• To set black level on/off.  
• To set virtual surround on/off.  
OPEN/CLOSE  
PAUSE  
OPEN/CLOSE  
POWER  
• To eject the cassette tape from  
the cassette compartment.  
• To open or close the disc tray. • To open or close the disc tray.  
• To pause tape playback or  
recording.  
• To advance playback one frame  
at a time.  
• To pause disc playback.  
• To advance playback one frame • To pause disc playback.  
at a time.  
To start playback  
To stop playback  
3
• To begin disc playback.  
• To begin disc playback.  
• To begin tape playback.  
PLAY  
• To turn the unit on or to turn the • To turn the unit on or to turn the • To turn the unit on or to turn the  
POWER  
STOP  
unit into the standby mode. (To  
unit into the standby mode. (To  
unit into the standby mode. (To  
PLAY  
completely turn off the unit, you completely turn off the unit, you completely turn off the unit, you  
must unplug the AC power cord.) must unplug the AC power cord.) must unplug the AC power cord.)  
REC/OTR  
REPEAT  
RETURN  
• To start recording or one-touch  
timer recording.  
• To play back a track or disc  
Remote Control  
8
repeatedly. (CD)  
• To play back a chapter or title  
repeatedly.  
• To select the repeat mode on/  
off.  
• To play back a file, folder or  
disc repeatedly. (MP3)  
POWER  
OPEN/CLOSE  
• To return to the previous  
operation in menu.  
• To return to the previous  
operation in menu.  
SPEED  
T-SET  
SEARCH  
MODE  
• To search track or file.  
• To search time. (CD)  
1
4
7
2
5
8
3
6
9
• To search chapter, title or time.  
• To set or search the markers.  
• To call up the index or time  
search menu.  
TRACKING  
• To set or search the markers. (CD)  
SETUP  
SKIP  
CLEAR/  
INPUT  
SELECT  
• To call up the DVD menu.  
• To skip chapters or titles.  
• To call up the DVD menu.  
• To skip tracks or files.  
• To call up the VCR menu.  
C. RESET  
0
VCR  
+10  
DVD  
DISPLAY  
MODE  
PLAY  
SPEED  
STOP  
SKIP  
• To select the recording speed.  
• To stop playback or recording.  
REC/OTR  
TOP MENU  
MENU  
PAUSE  
AUDIO  
STOP  
SEARCH  
MODE  
• To stop playback.  
• To stop playback.  
SUBTITLE  
ENTER  
• To select subtitles on a disc.  
SETUP  
ZOOM  
RETURN  
A-B  
• To return to the top file of the  
highest hierarchy in the pro-  
gram and file list. (MP3)  
TOP MENU  
SUBTITLE  
ANGLE  
REPEAT  
• To call up the top menu on a  
disc.  
TRACKING  
TRACKING  
• To adjust the tracking manually  
during playback.  
T-SET  
• To put the VCR into standby  
mode for a timer recording.  
VCR  
• To select the VCR output mode.  
• To activate VCR mode.  
ZOOM  
• To magnify part of a picture.  
(2x/4x)  
E8E0AUD  
1VMN28434 ★★★★★  
Printed in China  
E8E0AUD_DV220SL8A_EN_v1.indd 28  
2009/09/17 13:54:17  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Stereo Receiver EM 1031 U User Manual
Sharp Convection Oven R 200V User Manual
Sharp DVD Player DV SL80U User Manual
Sharp Fax Machine FO 175 User Manual
Sherwood Stereo Receiver R 965 User Manual
Shindaiwa Saw 68006 94310 User Manual
Sony Car Stereo System CDX C5750 User Manual
Sony CRT Television KV 36HS500 User Manual
Sony Door BE369 User Manual
Tailgator Blender The Original Portable Gas Powered Blender User Manual