SRC-3820
Touch Screen Remote Control
User Manual
050805
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
About this manual
This manual is designed to make using the SRC-3820 Touch Screen
Universal Remote Control as easy as possible. Information in this
document has been carefully checked for accuracy; however, no
guarantee is given to the correctness of the contents. The information in
this document is subject to change without notice.
Copyright
© Copyright 2005
This document contains proprietary information protected by copyright.
All rights are reserved. No part of this manual may be reproduced by
any mechanical, electronic or other means, in any form, without prior
written permission of SUNWAVE Technology Corporation.
Trademarks
All trademarks and registered trademarks are the property of their
respective owners.
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Table of Contents
Chapter 1 - Introducing the SRC-3820 ……………………………….1
SRC-3820 Features ………………………………………………….2
Unpacking the SRC-3820............................................................ 2
Identifying Components ………………………………………….3
Chapter 2 - Getting Started............................................................. 4
Installing Batteries ........................................................................ 4
Battery Indicator .................................................................. 5
Battery Tips and Precautions.............................................. 5
About the Touch Screen ............................................................ 6
Turning the LCD On ............................................................. 6
Precautions of Using the Touch Screen............................ 6
Using Hard Buttons....................................................................... 7
Entering the Setup Menu............................................................ 8
Navigating the Setup Menu............................................... 8
Chapter 3 - Setting Up the SRC-3820............................................ 10
Device Menu.............................................................................. 10
Creating a New Device.................................................... 11
Re-labeling a Device ........................................................ 11
Deleting a Device.............................................................. 13
Code Menu ................................................................................ 14
Using Pre-code to Program Devices............................... 15
Using Code Learning Mode............................................. 17
Erasing a Key Code........................................................... 19
Erasing a Device Codes ................................................... 20
LCD Layout ................................................................................. 21
Using Macros .............................................................................. 22
Creating a New Macro..................................................... 23
Deleting a Macro............................................................... 25
Viewing a Macro ............................................................... 26
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
Setting Quick CHs ..................................................................... 27
Setting a QUICK CH........................................................... 27
Deleting a QUICK CH …………..…………………………..28
Relabeling a QUICK CH.................................................... 29
Using Timer …………….…………………………………………...30
Creating a timer at the SLEEP mode ………………...….31
Creating a timer at the DATE mode …………………….33
Creating a time at the WEEK mode …………………….34
Deleting a timer ……………………………………………..35
Using the Transmission Feature ................................................ 36
Miscellaneous Menu ................................................................. 37
Setting the Date and Time ............................................... 38
Setting the Power Time ..................................................... 39
Setting the Backlight ………………………………………..39
Setting the Beep …………………………………………….40
Checking the Version Number........................................ 40
Resetting the SRC-3820 back to Factory Default ................. 41
Appendix A - Specifications..........................................................42
Appendix B - Accessories..............................................................43
Appendix C – Troubleshooting ......................................................44
Troubleshooting Tables ............................................................. 44
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 - Introducing the SRC-3820
Congratulations on your purchase of the SRC-3820
Touch-Screen Universal Remote Control. The SRC-3820
is a digital remote control that is equipped with a LCD,
touch panel and smart program. You can simply
select a device by tough panel and the appropriate
control screen will appear as you wish. The maximum
devices you can control on SRC-3820 are sixteen,
including VCRs, DVDs, TVs, Tuners, Amps, satellite dishes
and other equipments with infrared system.
The SRC-3820 is easy to set up. You can quickly
configure each device in your household or office by
using the innovative “learning eye” feature. In addition,
the advanced macro function enables you to initiate
a chain of up to 60 commands with the touch of a
single button.
Convenient and easy to use, the SRC-3820 provides
you with a complete central control solution.
This manual helps you learn how to use the SRC-
3820. It does not explain how to use your devices.
For your device, please refer to original user's
manual.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
SRC-3820 Features
The following list illustrates the SRC-3820’s key features.
• Large Touch Screen display
• Timer macro enables SRC-3820 to send commands
at specific time
• Control up to 16 devices
• Built in the smartest Learning program
• Pre-programmed manufacturer’s codes
• Favorite channels grouping
• Soft Keys and layout on screen can be changed
• Built in motion detector
• LED Backlight
Unpacking the SRC-3820
After you have unpacked the SRC-3810, check its
contents to make sure the following items are included.
• SRC-3820
• User’s Manual
• Pre-programmed Code list
If any of above items is missing or appears damaged,
please contact your dealer immediately. Do not throw
the shipping carton away in case you need to ship
your SRC-3820 thereafter.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying Components
Identifying Components
Refer to the following illustrations and identify related
key parts and components of the SRC-3820.
Infrared Eye: point the
infrared eye at the target
device
Quick Channel: enable
you to group channels
for easy access
LCD: stimulate
traditional controls on
key layout and provide a
better user interface
Touch Screen: replace
the function of rubber
buttons
Backlight: turn on LED
backlight
Hard Key: these
buttons include to turn
the target device on and
off, change channels,
and adjust or mute
volume
Page/Date: Exchange
page 1 and 2 each
device by pressing the
button, or display date
and time by pressing the
button
Device Keys: call
control screen for assign
device
Learning Eye: enable
users to learn original
remotes
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 - Getting Started
This chapter provides you to get using the SRC-3820
quickly.
Installing Batteries
The SRC-3820 is powered up by four AAA Alkaline
batteries (excluded). Batteries must be inserted
before you operate the SRC-3820. For more
understanding, the following steps will guide you how
to install batteries.
1. Turn the remote over, push the tab in the direction of
the arrow on the battery cover and slide the cover off.
2. Insert batteries, matching each battery to the (+) and
(–) marks as shown in the battery case.
3. Replace the battery cover.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Batteries
Battery Indicator
A battery power icon is displayed in the top right
corner of display.
Power
full
Power
Power
low
half of full
Figure 2: Battery Power Icon
When it gradually runs out of power, the low power
icon will appear.
When the battery low icon appears, you are not
allowed to enter in the setup mode.
Battery Tips and Precautions
• Immediately replace batteries when the battery low
icon appears.
• The SRC-3820 will not lose programmed data when
batteries are replaced, but will reset the time.
• Be sure to install fresh batteries. Alkaline batteries are
recommended. Do not mix different types of batteries.
• Be sure that the positive (+) and negative (–) polarities of
batteries match the diagram as shown in the battery
case.
• Do not expose batteries in the heat or flame.
• Keep batteries out of children.
• Low power batteries will reduce the control distance of
remote.
• Remove used batteries when used longer than two
years.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
About the Touch Screen
With a new user interface, the SRC-3820 enables you
to control all devices easily through the touch screen.
Turning the LCD On
Touch the screen or press any hard key to activate
the SRC-3820.
Precautions of Using the Touch Screen
Please read the following instructions carefully.
• Tap the LCD touch screen gently. Do not use force.
• Do not use a pen or any sharp object to tap the
screen, you might damage the surface.
• Keep the touch screen dry. Do not immerse it in liquid.
The SRC-3820 is not waterproof. If available, wipe off
any spills immediately.
• Do not expose the SRC-3820 to extreme temperatures.
Keep it away from heat sources.
• Avoid dropping the SRC-3820 to the ground.
• Do not drop anything on the touch screen.
• Clean the LCD touch screen with a soft cloth. If
needed, dampen the cloth slightly before cleaning.
Do not use abrasives or cleaning solutions.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
About the Touch Screen
Using Hard Buttons
The buttons on the SRC-3820 enable you to operate
devices as well as program the SRC-3820.
Among all hard buttons, there are 12 ones as
mentioned below with special functions.
• Favorite Channels Group Button
Press any QUICK CH (e.g., “NEWS”) to
enter control mode. Using
and
to browse through stored channels.
Press the QUICK CH (e.g., “NEWS”)
again to exit control mode.
• Macro Button
Display macro keys on each device
• Device Button
Enter device control page, or enter to
another target device
• Page/Date Button
Exchange Page 1 and 2 each device by
pressing the button, or display date and
time when pressing the button over two
seconds.
• Power Button
Turn devices on and off.
• Backlight
Press the button to turn on backlight.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Entering the Setup Menu
Press
and
at the same time over three seconds to
enter the setup menu.
Figure 3: Entering the Setup Menu
When the power low icon appears or the system is
located at the QUICK CH mode, you are not allowed
to enter the setup menu.
Navigating the Setup Menu
While in the setup mode, tap
and
to select
desired option and tap
to confirm or press
to
exit.
Figure 4: Navigating Menu
The standby time is set two minutes when the
system is in the state of setup mode. Once time
ends up, the system will compel you to exit the
setup mode and return to the operation mode.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Entering the Setup Menu
The following illustration shows you a setup menu tree of SRC-3820.
Each main menu has one to several options. For detailed
description, please refer to page 10 of Setting up the SRC-3820.
Figure 5: Setup Menu Tree
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 - Setting Up the SRC-3820
This chapter will guide you how to setup a SRC-3820.
Before the SRC-3820 can be used, you are required to
configure the screen and program all keys with correct
codes.
Device Menu
Enter the setup mode, select Device option and tap
to enter the Device menu. In the Device menu,
please tap
options.
and
to browse through following
• New: set up a new device
• Relabel: rename a device
• Delete: delete a device
The SRC-3820 provides eight default devices:
TV DVD SAT VCR AMP TUNER CD AUX
When a new device is created, the SRC-3820 will
request to load a default device configuration
first.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Menu
Creating a New Device
The section will instruct you how to create a new
device.
1. Select NEWoption.
2. Tap
to confirm.
3. Each device name contains at
most 8 alphanumeric characters.
•
Tap
or
to search
desired letters (from A-Z, 0-9,
and space key).
•
Tap
or
to previous or
next character. The
character will blink when
cursor moves to there.
•
Press
to confirm settings.
4. You are prompted to select an
attribution for the new device.
•
Tap
or
to search a
desired attribution.
•
A selected attribution will
auto load the default keys
layout to the new device.
•
Press
to confirm settings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Re-labeling a Device
The section will instruct you how to edit a device label.
1. Select Relabeloption.
2. Tap
to confirm.
3. Among default devices, select
one of them that you desire to re-
label (TV for example).
4. Edit the device label.
•
Tap
or
to search desired
letters (from A-Z, 0-9, and the
space key).
•
Tap
or
to previous or
next character. The
character will blink when
cursor moves to there.
•
Press
Or, press
to confirm settings.
to cancel the
decision and exit.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Device Menu
Deleting a Device
The section will instruct you how to delete a device,
including the screen configuration and codes.
1. Select Deleteoption.
2. Tap
to confirm.
3. Among default devices, select
one of them that you desire to
delete (TV for example).
4. Press
to confirm the decision.
5. You are prompted to reconfirm
the action. Let 4 numbers
disappear by finger tapping.
When it is successful, the screen
will back to previous menu.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Code Menu
Enter the setup mode, select Code option and tap
to enter the Code menu. In the Code menu, please
tap
and
to browse through following options.
• Pre-Code: The function is the fastest way to set up a
remote control. All collected brands and
models are listed in the Pre-programmed
Code List. You are able to manually load a
code, or use auto search function to figure out
a compatible code. However, few of newest
and unpopular models may not be preset in
the code list, so you can not use Pre-code
function but the Learning Function will be
available.
• Learn: To retrieve shortcomings of preprogrammed
codes. By key to key transmitting, the function
allows you to learn codes from other remote
controls, and it would be the best solution for
newest and unpopular models.
• Del Key: delete a key code
• Del Bank: delete a set of codes for a device
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Menu
Using Pre-code to Program Devices
The section will instruct you how to program a device
using preprogrammed codes.
Enter the setup mode, select PRE-CODEoption and tap
to enter the Pre-Code menu.
Selecting the code manually
1. Select a device that you desire to
program in (TV for example).
2. According to the device’s brand
and model, you are able to figure
out plug-compatible codes from
the preprogrammed codes list. In
case there is nothing found in the
code list, please try the Learning
function.
3. Enter the four-digit code number
which you found from the code list
and press
to confirm settings.
4. To make sure the selected code
accuracy, please press Power
button for testing. If the device
could be turned on by SRC-3820,
you might take right code. For
more identification, go on trying
other keys. If code is incorrect,
please return to Step 3 to try
another code until the end.
Note: Some codes may be
compatible for several
models.
5. If code is correct, please press
to confirm settings and exit.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Selecting a code automatically
1. Turn on the target device that you
want to control.
2. Select a device you desire to
program in (TV for example).
3. Point the SRC-3820 at the target
device. Tap the AUTO key. An
“AUTO” message will be showed
on screen while the SRC-3820 is
automatically detecting
compatible codes. When the
device has been turned off, you
are required to press any button
or tap any key to stop searching
right away.
4. To make sure the code number is
compatible with the target
device, please press the POWER
button
for testing. If the
device can be turned on by SRC-
3820, you might take right code.
For more identification, go on
trying other keys. If code is
incorrect, please return to Step 3
to try another code until the end.
Note: Some codes may be
compatible for several
models.
5. If code is correct, please press
to confirm settings and exit.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Menu
Using Code Learning Mode
The Learning function enables the SRC-3820 to program
other remote controls.
Learning from another Remote Control
Put the target remote control under the SRC-3820 and
point at the SRC-3820’s learning eye, which is located
at the bottom of the unit.
1. Select Learnoption.
2. Tap
to confirm.
3. Point the infrared eye of target
remote control at the learning
eye of SRC-3820 (see Page 3)
and keep apart between 2~4
inches (5~10cm).
4. Select a device to learn codes
from the target remote control
(AMP for example). The screen
firstly will display a page of soft
keys that correspond to under
hard buttons for you to learn
codes. Every key on screen will
be flashing. If you desire to end
off flashing on that key, you need
to learn the corresponding
button from your original remote
control now.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
5. At the target remote control
side, you are required to press
the corresponding button as
same as the key while it is
flashing on the screen of SRC-
3820. If the code is successfully
learned, the screen will display
an “OK” message. If not, it will
display an “ERROR” message.
6. If needed, you also can tap
desired soft key and make it
flash to learn code.
Note: Each device has 3 pages
of default soft keys while
Learning. You can press
to move on next
page.
7. When all keys have learned,
please press
to exit the
Learning mode.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Menu
Erasing a Key Code
The section will instruct you how to delete key codes.
1. Select del keyoption.
2. Tap
to confirm.
3. Select target device (TV for
example).
4. Tap the key or press the button
that you desire to delete its code.
Once the screen displays an “OK”
message, it means the code is
successfully deleted.
5. If finished, please press
exit.
or
to
19
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Erasing a Device Codes
The section will instruct you how to delete entire codes
of a device.
1. Select del bank option.
2. Tap
to confirm.
3. Press the target device that you
desire to delete its codes (TV for
example).
4. Press
to confirm the decision.
5. You are prompted to reconfirm
the action. Let 4 numbers
disappear by finger tapping.
When it is successful, the screen
will back to previous menu.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Layout
LCD Layout
The SRC-3820 enables users to change layout in order to
match key allocation of original remote controls.
1. Select layoutoption.
2. Tap
to confirm.
3. Press the target device that you
desire to edit (TV for example).
4. Tap the key that you desire to
change its icon. All available
choices make a cycle will
appear one by one as you tap.
Select one of choices and leave
it on screen.
Note: Press
to display all
available icons stored in all
keys.
5. Press
press
to confirm settings, or
to cancel the decision
and exit.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Using Macros
A macro key can be composed of a series of
commands that enable you to control several devices
at one time with a single button.
You cannot assign any of Device key, the Page/Date
key, the Backlight key, or three QUICK CH keys to be
a macro key.
Enter the setup mode, select Macro option and tap
to enter the Macro menu. In the Macro menu, tap
and
to browse through following options:
• New: set up a new macro key
• Delete: delete a macro key
• View: review commands of a macro key
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Macros
Creating a New Macro
The section instructs you how to create a macro key.
A macro key is allowed to store at most 60
commands.
1. Select NEWoption.
2. Tap
to confirm.
3. Tap the target device that you
desire to put the macro key in (TV for
example). If it is successful, you will
hear three beeps.
Note: When the key stores new
macro commands, it will
replace original data.
4. Assign a key to be the macro key.
Start to input commands, and they
all will be stored in the macro key
one after another until you input a
time delay or save settings. Please
press
to proceed
5. If you want to input a time delay,
please tap the number key and tap
to confirm. At the time, the
system will go back to last screen as
step 4 in order for you to set up other
commands. Until you finish setting,
please press
two times to save
settings and exit.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
The following example will help you to get more
understanding of how to create a macro key.
Example: We set up a macro key to watch a movie.
1. Tap
store the following commands
2. Press the TV device button
3. Press power button
4. Press to select a time delay (00-99 sec)
key to be the macro key in order to
5. Tap TV/Video key
6. Press the DVD device button
7. Press power
8. Press to select a time delay (00-99 sec)
9. Tap play key
10. Press two times to save settings and exit
button
How to set up a time delay?
For example: 0 second = tap ‘0’ + ’0’ + ’Enter’
1 second = tap ‘0’ + ‘1’ + ’Enter’
10 seconds = tap ‘1’ + ‘0’ + ’Enter’
11 seconds = tap ’1’ + ’1’ + ’Enter’
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Macros
Deleting a Macro
The section will instruct you how to delete a macro key.
1. Select deleteoption.
2. Tap
to confirm.
3. Press the target device which has
stored the macro key you desire
to delete (VCR for example).
4. Tap the key or press the button
you desire to delete.
5. Press
or
to exit
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Viewing a Macro
The section will instruct you how to display preset
commands of a macro key.
1. Select Viewoption.
2. Tap
to confirm.
3. Press the target device which
stores the macro key you desire to
review its content (VCR for
example)
4. Tap the said macro key. On
screen, it will display a series of
commands step by step.
5. Press
to exit.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting QUICK CHs
Setting QUICK CHs
The SRC-3820 enables you to classify favorite channels
into groups.
Enter the setup mode, select QUICK CH option and tap
to enter the QUICK CH menu. In the QUICK CH
menu, tap
options:
and
to browse through following
• ADD: set up a QUICK CH
• Delete: delete a QUICK CH
• Relabel: rename a classification label
The SRC-3820 has three QUICK CH groups as
NEWS, MOVIES and KIDS for each device. Each
device can store at most 50 channels.
For example, if 40 channels have been stored in the
"News" CH group and 8 channels in the "Movie" CH
group, the "Kids" CH group only can store 2 more
channels.
Setting a QUICK CH
This section will instruct you how to set up a QUICK CH
group.
1. Select ADDoption.
2. Tap
to confirm.
3. Press the target device that you
desire to set up(TV for example)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
4. Input the channel number you like
(e.g. 12).
5. Select a QUICK CH to store the
channel (e.g. NEWS).
6. Repeat steps 4 ~ 5 to input other
channels.
7. Press
to confirm settings and exit.
Deleting a QUICK CH
This section will instruct you how to delete a QUICK CH
group.
1. Select deleteoption.
2. Tap
to confirm.
3. Press the target device that you
desire to set up (TV for example).
4. Select target QUICK CH group (e.g.,
NEWS).
5. Tap
or
to find out which
channel number you desire to
delete.
6. Tap
to delete the channel.
7. Repeat Step 5~6 to delete other
channels.
8. Press
to exit.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting QUICK CHs
Relabeling a QUICK CH
This section will instruct you how to edit a QUICK CH
group name on screen.
1. Select relabeloption.
2. Tap
to confirm.
3. Select target QUICK CH that you
desire to re-label (e.g., NEWS).
4. Edit the QUICK CH name (at most
8 letters).
•
Tap
or
to search desired
letters (from A-Z, 0-9, and the
space key).
•
Tap
or
to previous or next
character. The character will
blink when cursor moves to
there.
•
Tap
to confirm settings and
exit. Or, click
to exit.
After you have set up the QUICK CH, press any QUICK CH
(e.g., “NEWS”) to open the QUICK CH display. Using
and
to browse through all channels, stored in this
QUICK CH. Press the QUICK CH (e.g., “NEWS”) again to exit
the QUICK CH display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Using Timer
Through timer function added, it enhances the
capability of SRC-3820 in the use of Macro. The
following instruction will guide you how to use it.
Enter the setup mode, select Timer option and tap
to enter the Timer menu. In the Timer menu, there are 9
space keys allowing you to set up. Each space key
can be set as a timer with macro keys. Before setting
timer, there are 4 options in the following for your
selection.
• Sleep: set up a timer at sleep mode (setting will be
erased automatically after executing one cycle)
• Date mode: set up a timer at date mode (setting will be
erased automatically after executing one
cycle)
• Week mode: set up a timer at week mode
• Delete: delete a timer
Before setting timer, users should finish system date
and time setting. Please refer to page 38 of Setting
the Date and Time.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Timer
Creating a timer at the SLEEP mode
A device with sleep mode enables you to turn its power
off after a time period. If the timer function links up
macro function, it enables the SRC-3820 to implement
commands at the specific time.
1. Tap
2. Tap
key for an example.
to confirm and enter timer
options
.
3. Tap
or
to search the SLEEP
to confirm and
mode, and tap
enter the timer setting screen.
4. Edit the timer
•
•
Tap
or
to search desired
time (0~23 for hour, 0~59 for
minute).
Tap
setting or minute setting. The
character will blink when cursor
moves to there.
or
to select hour
•
Tap
click
to confirm settings. Or,
to exit.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
5. Edit macro commands.
The following steps about setting
macro commands are same as
creating a macro, besides you don’t
need to assign a macro key. Please
refer to page 23 of Creating a new
macro key.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Timer
Creating a timer at the DATE mode
This section will instruct you how to set up a timer at the
Date mode.
1. Tap
2. Tap
key for an example.
to confirm and enter timer
options
.
3. Tap
or
to search the DATE
to confirm and
mode, and tap
enter the timer setting screen.
4. Edit the timer
When setting date:
•
Tap
or
to search desired
date (Jan~Dec for month,
01~31 for day).
•
Tap
or
to select month
setting or day setting. The
character will blink when cursor
moves to there.
•
Tap
click
to confirm settings. Or,
to exit.
When setting time:
•
•
•
Tap
or
to search desired
time (1am~12am and
1pm~12pm for hour, 0~59 for
minute).
Tap
or
to select hour
setting or minute setting. The
character will blink when cursor
moves to there.
Tap
click
to confirm settings. Or,
to exit.
5. Edit macro commands
It’s the same way as you set macro
commands at the SLEEP mode.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Creating a timer at the WEEK mode
This section will instruct you how to set up a timer at the
Week mode.
1. Tap
2. Tap
key for an example.
to confirm and enter timer
options
.
3. Tap
or
to search the WEEK
to confirm and
mode, and tap
enter the timer setting screen.
4. Edit the timer
When setting the weekday:
•
Tap
or
to search desired
to
weekdays, and tap
confirm each day. When
weekdays setting finished, press
to confirm settings and exit.
Note: there are 7 cursors
represent Sunday ~ Saturday.
When setting the time:
•
It’s the same way as you set
timer at the DATE mode.
5. Edit macro commands
It’s the same way as you set macro
commands at the SLEEP mode.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Timer
Deleting a timer
The section will instruct you how to delete a timer.
1. Tap
2. Tap
key for an example.
to confirm and enter timer
options
.
3. Tap
or
to search the Delete
function, and tap
and exit.
to confirm
35
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Using the Transmission Feature
The SRC-3820 can transmit inner data to another SRC-
3820 by the optional UART cable.
1. Take a UART cable and connect
the source SRC-3820 to another
target one.
2. On the source SRC-3820, enter the
setup mode and select TRANS
option and tap
to confirm.
3. A confirmation screen will pop up.
You are prompted to reconfirm the
action. Let 4 numbers disappear by
finger tapping.
4. During transmitting, the LCD will
show processing message as
.
5. When the transmission is successful,
it will show “OK” message. In case
the transmission is failed, it will show
“ERROR” message.
6. Whatever it is successful or not, the
screen will back to the setup mode
when completion.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous Menus
Miscellaneous Menus
Enter the setup mode, select OTHER option and tap
to enter OTHER menu. Tap
through following options:
and
to browse
• Clock: set the date and time
• Power: set a time period to remain power on
• backlit: set a time period to remain the backlight on
• beep: set beep sound on and off for all keys and
buttons
• version: display program version and
preprogrammed codes database version
37
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Setting the Date and Time
1. Select CLOCK option.
2. Tap
to confirm.
3. Enter the date and time
When setting date:
•
Tap
or
to search desired
month, day and year
Month: Jan~Dec
Day: 01~31
Year: 02~50 (2002~2050)
•
Tap
or
to select month,
day, or year setting. Each
character will blink when the
cursor moves to there.
When setting time:
•
•
Tap
time
or
to search desired
Hour: 1~12am and 1~12pm (12
hours format)
Minute: 00~59
Tap
or
to select hour or
minute setting. Each
character will blink when the
cursor moves to there.
4. Press
press
to confirm settings. Or,
to exit.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Miscellaneous Menus
Setting the Power Time
1. Select poweroption.
2. Tap
3. The default time period is 20 minutes.
Tap or to set desired time
(1~90 minutes).
4. Press to confirm settings or
to confirm.
to
exit.
Setting the Backlight
1. Select backlitoption.
2. Tap
3. The default time period is 10
seconds. Tap or to set desired
time (00~60 seconds).
to confirm.
Note: If you choose 0 second, the
Backlight function will be
disabled.
4. Press
to confirm settings. Or, press
to exit.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Setting the Beep
1. Select Beepoption.
2. Tap
off. When buzzer is switched on,
the symbol of will appear on
screen.
3. Press
to switch buzzer on and
to exit.
Checking the Version Number
1. Select versionoption.
2. Tap
to confirm.
3. Tap
or to show version
number of programand pre-code
(pre-programmed coded
database).
4. Press
to exit.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting the SRC-3820 back to Factory Default
Resetting the SRC-3820 back to Factory Default
This section will instruct you how to reset the SRC-3820
back to factory default.
All individual defined keys will be erased while
resetting the SRC-3820.
1. Select Resetoption.
2. Click
to confirm.
3. A confirmation screen will pop up.
You are prompted to reconfirm
the action. Let 4 numbers
disappear by finger tapping
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A - Specifications
Model
SRC-3820
Dimension (W x H x D)
2.4 x 8.3 x 1.0 inches
(6.0 x 21.0 x 2.5 cm)
Weight (without
Batteries)
5.3 oz (150 g)
Number of Device
LCD Screen (W x H)
Soft key
16 devices
1.6 x 3.6 inches (4.0 x 9.0 cm)
42 keys
Hard Button
20 buttons
Backlight
LED type
Learning Frequency
Memory
20 kHz – 455 kHz & Pulse
512 KB flash memory
Battery
AAA x 4 alkaline batteries
LCD Off: 35 µA
Power Consumption
LCD On: 420 µA
Operation: 30 - 150 mA (Max)
Battery Life
Approx. 3 - 6 months
8 – 10 meters
Operating Distance
PC Interface (option)
USB cable (SLC-2080)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B - Accessories
＊SLC–2080
USB cable
Transmit wire
The SLC–2080 is an optional link cable that enables
SRC-3820 to transmit data to another one or to
upgrade program from computer.
With the Upgrade Tools, it enables uses to upgrade
program and preprogrammed codes database.
●
●
●
Upgrade Memory: It will erase old preset data, and
memory will be replaced by new factory default.
Upgrade Pre-programmed code: Preset codes
database only.
Upgrade MCU: MCU program only.
If you have any question, please refer to the SLC-2080
user manual for more information.
Using the Transmit wire, you are able to connect both
SRC-3820 for data transmission. Please refer to page 36
for more information.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
SRC-3820 User’s Manual
Appendix C – Troubleshooting
Troubleshooting Tables
Problem
Solution
1. Batteries may be dead. Renew
batteries with 4 x AAA alkaline
batteries.
LCD does not
show anything
when you tap it or
press any hard
buttons
2. Check the batteries if they are
properly installed.
1. Make sure that you turn on the
control screen of device on SRC-
3820.
One of devices
can not be
controlled
2. Move closer to the target device. The
maximum operating distance is
approximately 30 feet.
3. Ensure that the SRC-3820 is aiming at
the target device, and there is no
obstruction between remote and the
target device.
4. Ensure that the SRC-3820 has codes
inside for the target device.
An “ERROR”
message is
displayed on
screen while the
Learning function
is in progress
1. Make sure you press each hard
button of original remote at least over
2 seconds.
2. Make sure the original remote would
aim at learning eye of SRC-3820
straightly.
3. Keep 2~4 inches (5~10 cm) apart
between SRC-3820 and the original
remote.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting Tables
Problem
Solution
1. There is no code in the key or button.
An “ERROR”
message is
displayed while
operating
“REC” key can not 1. For safety issue, the SRC-3820 requests
be used
users to tap “REC” key over 2 seconds
at least.
The code can not 1. Make sure the SRC-3820 and original
be learned
successfully
remote renew batteries.
2. Make sure you press each hard
button of original remote at least over
2 seconds.
3. Make sure the original remote would
aim at learning eye of SRC-3820
straightly.
4. Keep 2~4 inches (5~10 cm) apart
between SRC-3820 and the original
remote.
5. Do not learn near an incandescent
lamp.
6. Memory capacity is full.
7. Make sure the original device is using
IR system.
A button stores
two or more
codes
1. In SRC-3820, you should store each
code to individual key by learning.
1. The code number doesn’t exist in the
code list.
When you enter
a code number
but coming out
an “ERROR”
2. The code number doesn’t belong
to the attribution same with your
target device.
message
45
Download from Www.Somanuals.com. All Manuals Search And Download.
|