Sunbeam Hot Beverage Maker KE9600 User Manual

VARIABLE TEMPERATURE KETTLE  
Instruction Booklet  
Please read these instructions carefully and retain for future reference  
Download from Www.Somanuals.com. All Manuals Search And Download.  
KE9600  
Contents  
Sunbeam’s Safety Precautions  
Congratulations  
Features of your Café Series  
1
2
®
Variable Temperature Kettle  
Using your Café Series  
3
®
Variable Temperature Kettle  
Tea Brewing Styles and Tips  
Sunbeam’s 3-Way Safety System  
Care and Cleaning  
5
7
8
9
Important instructions – retain for  
future use.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sunbeam’s Safety Precautions  
SAFETY PRECAUTIONS FOR YOUR  
SUNBEAM KETTLE.  
• Boiling water will scald. Do not leave a boiling  
or hot kettle near or where children  
may touch it.  
• Do not move kettle while switched on.  
• Always turn the power off and unplug the cord  
while the kettle is NOT in use.  
• Do not operate the kettle without water.  
®
• Your Café Series Variable Temperature Kettle  
• Boiling water may be ejected, if overfilled.  
must only be used with the power base  
supplied.  
• Always operate the kettle on a flat,  
level surface.  
• Do not leave the power cord near the edge  
of a bench top where children may touch  
or pull it.  
Sunbeam is very safety conscious when designing  
and manufacturing consumer products, but it is  
essential that the product user also exercise care  
when using an electrical appliance. Listed below are  
precautions which are essential for the safe use of  
an electrical appliance:  
• Do not use an appliance for any purpose other  
than its intended use.  
• Do not place an appliance on or near a hot gas  
flame, electric element or on a heated oven.  
• Do not place on top of any other appliance.  
• Do not let the power cord of an appliance hang  
over the edge of a table or bench top or touch any  
hot surface.  
• Read carefully and save all the instructions  
provided with an appliance.  
• Always turn the power off at the power outlet  
before you insert or remove a plug. Remove by  
grasping the plug - do not pull on the cord.  
• Do not operate any electrical appliance with a  
damaged cord or after the appliance has been  
damaged in any manner. If damage is suspected,  
return the appliance to the nearest Sunbeam  
Appointed Service Centre for examination, repair  
or adjustment.  
Turn the power off and remove the plug when the  
appliance is not in use and before cleaning.  
• Do not use your appliance with an extension cord  
unless this cord has been checked and tested by  
a qualified technician or service person.  
• For additional protection, Sunbeam recommend  
the use of a residual current device (RCD)  
with a tripping current not exceeding 30mA in  
the electrical circuit supplying power to your  
appliances.  
• Always use your appliance from a power outlet of  
the voltage (A.C. only) marked on the appliance.  
• This appliance is not intended for use by persons  
(including children) with reduced physical, sensory • Do not immerse the appliance in water or any  
or mental capabilities, or lack of experience  
and knowledge, unless they have been given  
supervision or instruction concerning use of the  
appliance by a person responsible for their safety.  
other liquid unless recommended.  
• Appliances are not intended to be operated by  
means of an external timer or separate remote  
control system.  
• Children should be supervised to ensure that they  
do not play with the appliance.  
• This appliance is intended to be used in  
household and similar applications such as: staff  
kitchen areas in shops, offices and other working  
environments; farm houses; by clients in hotels,  
motels and other residential type environments;  
bed and breakfast type environments.  
• The temperature of accessible surfaces may be  
high when the appliance is operating or when the  
heating cycle has finished  
• Never leave an appliance unattended while in use.  
If you have any concerns regarding the performance and use of your appliance,  
Ensure the above safety precautions are understood.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations  
Congratulations on the purchase of your  
Sunbeam Café Series Variable Temperature  
Kettle  
Uncompromising blends of stainless steel,  
brass and die-cast alloy characterise the  
range. This combined with advanced  
technology and functional design, guarantee  
the performance, that each product will  
surpass expectations.  
®
®
The Sunbeam Café Series delivers quality,  
style and superior performance capturing  
the essence of the commercial kitchen.  
Inspired by heavy-duty equipment found in  
restaurants, cafes and bars, the Sunbeam  
®
The Sunbeam Café Series Variable  
Temperature Kettle is designed with quality  
stainless steel components and includes  
many features that will help you brew the  
perfect cup of tea.  
®
Café Series is built to last. It brings together  
a range of appliances designed to expertly  
create authentic café food and beverages at  
home.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Features of your Cafe Series  
Variable Temperature Kettle  
Stylish stainless steel design  
Long life stainless steel with a premium  
brushed and polished finish delivers quality  
and style to suit any kitchen décor.  
2400 watt concealed element  
The fast boil 2400 watt element is concealed  
in the base of the kettle for longer element  
life. The smooth stainless floor reduces scale  
build up and allows for easy cleaning.  
Twin water level gauges  
Full length water gauge indicates the volume  
of water in the kettle up to 1.8L. The two  
gauges make the kettle convenient to use for  
both left and right handed users.  
360 degree cordless power base  
Designed to allow you to place the kettle  
on the base in any direction. Convenient  
for both left and right handed users.  
Cord storage facility  
Excess cord can be wound around the cord  
storage facility underneath the power base.  
Removable mesh filter  
Keeps the water clean of any foreign matter  
and is removable for easy cleaning.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3-Way Safety System  
1 – Automatically switches the kettle off after boiling.  
2 – Cuts out for boil-dry protection.  
3 – Shuts down in case of an electrical fault.  
Hinged locking lid  
For ease of use the lid is activated by a  
single press of a button. The design is ideal  
for one-handed filling and also locks shut to  
prevent accidental scalding.  
Power base with LCD display panel  
The LCD screen displays the current  
temperature and the selected temperature.  
When the heating cycle is in progress it also  
displays the amount of time remaining (in  
minutes and seconds) before the selected  
temperature is reached.  
START / CANCEL  
Once the desired temperature has been  
selected the START/CANCEL button initiates  
the heating cycle.  
It is also a quick start function. If the  
START/CANCEL button is pressed before a  
temperature is selected, the previous settings  
are initiated.  
Temp  
Enables the user to select from 5 different  
temperatures; 80°C, 85°C, 90°C, 95°C and  
100°C (boil).  
Keep warm feature  
Convenient Keep Warm feature allows  
you to maintain the selected water  
temperature for up to 20 minutes.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Using your Cafe Series Variable  
Temperature Kettle  
®
Before using your kettle.  
Using your Cafe Series Variable Temperature  
Kettle  
It is recommended that you clean your kettle  
before using it by filling the kettle with water  
to the maximum level indicator, boiling the  
water and discarding.  
Tip: The Variable Temperature Kettle has five  
optimum tea temperatures you can select  
from: 80°C, 85°C, 90°C, 95°C and 100°C  
(boil). Refer to the ‘Tea Brewing Styles and  
Tips’ table on page 8 for the ideal water  
temperature for your tea.  
Important: Do not fill the kettle over the  
maximum level, as water may spill out of the  
spout when boiling.  
Note: The temperature settings are a guide  
only and may vary depending on personal  
preference.  
1.Press the ‘TEMP’ button to select from five  
pre-set temperatures: 80°C, 85°C, 90°C,  
95°C and 100°C (boil). Your selected  
water temperature will be displayed on the  
LCD display for 3 seconds. Press ‘START/  
CANCELto initiate the heating cycle.  
1.To fill the kettle, remove it from the power  
base and lift the lid, by pressing the button  
at the top of the handle. Do not fill the  
kettle below the 'min' indication.  
2.Fill the kettle with the desired amount of  
water. Always fill the kettle between the  
minimum and maximum marks. Too little  
water will result in the kettle switching off  
before the water has boiled.  
Note: If after 3 seconds nothing is pressed,  
the LCD display will revert back to showing  
the current water temperature.  
Note: If the START/CANCEL button is pressed  
without any temperatures being selected  
beforehand, it will automatically default to  
the last used setting. The START/CANCEL  
button is originally preset to 100°C (boil).  
3.Push the lid closed firmly until it locks into  
position.  
4.Place the kettle onto the power base. Plug  
the power cord into a 230-240 Volt AC  
power outlet and switch the power on.  
Note: If the kettle is not positioned on top of  
the power base correctly the LCD panel will  
show “--:---“.  
2.When the heating cycle is initiated, the  
LCD display will show the maximum  
amount of time required to reach the  
selected water temperature. The Time to  
Boil feature shown on the LCD display will  
count down and flash until the correct  
time is calculated. Once the correct time  
is calculated the Time to Boil recalibrates  
to the correct time remaining and will no  
longer flash.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Using your Cafe Series Variable Temperature Kettle continued  
Note: The maximum amount of time is  
dependent on the ambient temperature  
of the water. The colder the initial water  
temperature the longer the heating cycle.  
For example, if the initial temperature is  
20°C the time to boil feature will show a  
maximum time of 5min 24 seconds.  
3. During the heating cycle the TEMP button  
will flash and the START/CANCEL button  
will be illuminated. The LCD panel will  
display the increasing temperature and the  
number of minutes and seconds remaining  
until the selected temperature is reached  
4. The kettle will beep once when the  
selected water temperature has been  
reached.  
Note: To cancel the heating process at any  
time during the boiling cycle, simply press  
the ‘START/CANCELbutton once.  
Time to Boil Feature  
The Time to Boil feature calculates the  
amount of time remaining until the selected  
water temperature is reached.  
Note: Water does not boil evenly and the  
amount of time it takes to boil is dependent  
on factors such as the volume of water,  
the ambient temperature, levels of mineral  
content and the selected temperature.  
Therefore, the Time to Boil is a guide only  
and is not scientifically exact.  
When the heating cycle is initiated, the LCD  
display will show the maximum amount of  
time required to reach the selected water  
temperature. The Time to Boil shown on the  
LCD display will count down and flash until  
the correct amount of time is calculated.  
Once the correct time is calculated the  
Time to Boil may jump to the correct time  
remaining and will no longer flash.  
Note: The Time to Boil feature does not  
calculate the remaining time before the  
temperature is reached when the initial  
temperature is 75ºC and above.  
Note: If the kettle is removed from the power  
base during the heating process, the kettle  
will automatically reset, cancelling the  
heating cycle. However, when the kettle is  
replaced the Keep Warm function will remain  
illuminated if it was previously selected..  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
®
Using your Cafe Series Variable Temperature Kettle continued  
Keep Warm Function  
Sleep mode  
1.To maintain the temperature of the  
selected water temperature, simply press  
the ‘KEEP WARM’ button. This will maintain  
the temperature selected for up to 20  
minutes. The ‘KEEP WARM’ button will  
remain illuminated to indicate that it has  
been selected.  
The kettle will automatically switch off the  
LCD screen after 20 minutes to save power.  
To exit the standby mode, press any button.  
Note: If START/CANCEL is selected during  
Sleep Mode, the kettle will automatically  
initiate the previous settings (including  
temperature and Keep Warm).  
Figure 1  
Note: The ‘KEEP WARM’ button can be  
pressed when selecting your desired water  
temperature or after the power START/  
CANCEL button has been pressed (during the  
boiling cycle). It will then continue to flash  
during the heating cycle and will remain  
illuminated during the keep warm period.  
The ‘KEEP WARM’ button will illuminate to  
indicate that it has been selected.  
Note: If the ‘KEEP WARM’ button is selected  
when the 100°C (boil) temperature has been  
selected, the kettle will boil to 100°C and  
maintain at 100°C for up to 20 minutes.  
Note: If the kettle is removed from the power  
base during the keep warm period, the kettle  
will automatically resume the keep warm  
period at the set temperature when the kettle  
is replaced  
Note: During the heating cycle, the LCD  
display panel will remain illuminated,  
showing the temperature of the kettle as  
it increases and also the amount of time  
left before the kettle reaches the selected  
termperature.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tea Brewing Styles and Tips  
Optimum Tea Temperatures  
The Variable Temperature Kettle has five optimum tea brewing temperatures 80°C, 85°C,  
90°C, 95°C and 100°C (boil). Refer to the table below for Sunbeam’s recommended  
temperature for a range of tea varieties:  
OPTIMUM TEA TEMPERATURES  
Asatsutu  
Bancha  
Ceylon Green  
China Chun  
Mee  
Apple  
China Rose  
Darjeeling  
Earl Grey  
Ensemble  
Indian Chai  
Irish  
Breakfast  
Keeman  
Pouchong  
Ti Kuan Yin  
Wuyi  
Assam  
Chai  
Blackcurrant  
China Yin Zhen  
Elderflower  
Ginger  
Lemon  
Lychee  
Orange  
Peony  
Silver  
Needle  
Chamomile  
Cinnamon  
Herbal  
Lemongrass  
Peppermint  
Rooibos  
Green  
Dragon Well  
Fukamushi  
Sencha  
Gunpowder  
Gyokuro  
Jasmine  
Kukicha  
Nepal Green  
Pi Lo Chun  
Sencha  
Spearmint  
Snowbud  
Strawberry  
Instant Coffee  
Plunger Coffee  
Tencha  
Brew Strength and Time  
The brew strength preference will vary from individual to individual, however we have provided  
below some suggested brew times dependant on how strong you like the flavour of your tea.  
Note: Certain teas should not be brewed for  
more than 3 minutes, including certain green  
teas, white teas and oolong teas.  
We recommend you read the packaging of  
your purchased tea variety for more detailed  
brewing instructions.  
MILD  
3 minutes  
4 minutes  
5 minutes  
MEDIUM  
STRONG  
NOTE: These two tables are recommendations only and may vary depending on personal  
preference, brand and age of tea/coffee used.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sunbeam’s 3-Way  
Safety System  
Safety is a major consideration in the design  
of a Sunbeam kettle. This is why we have  
developed our 3-Way Safety System, which  
ensures that your kettle will:  
3.Shut-down in case of overheating.  
In the event of overheating, the kettle will  
automatically shut down to prevent further  
damage. Should this occur, take your kettle  
to a Sunbeam Service Centre or Appointed  
Service Agent.  
1.Automatically switch off after boiling.  
For convenience, safety and energy  
efficiency, your Sunbeam kettle will  
automatically switch off after boiling.  
2.Cut-out for boil-dry protection.  
If the kettle is operated without water, it  
will automatically cut-out, preventing any  
damage to the element.  
If this occurs, allow the kettle to cool  
before filling with cold water and  
re-boiling.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Care and Cleaning  
Always disconnect the kettle from the power  
outlet before cleaning.  
Never immerse the kettle switch area, cord  
or power base in water, or allow moisture to  
come into contact with these parts.  
To clean the stainless exterior  
The stainless steel surface may be wiped over  
with a damp cloth and polished with a soft  
dry cloth.  
CAUTION: Do not use chemicals, steelwool,  
or abrasive cleaners to clean the outside of  
the kettle, as these will scratch the stainless  
steel surface.  
Descale Your Kettle Regularly  
Mineral deposits in tap water solidify when  
the water is heated; lime scale may be white,  
coloured, even rusty-looking and is normally  
visible but phosphate scale isn’t generally  
visible although may cause the water to  
appear cloudy when heated. This may cause  
the interior of the water gauge to discolour,  
cause overheating, trigger the boil-dry cut-out  
mechanism or even reduce the kettle’s life.  
To clean the mesh filter  
Press the button on the handle to open  
the hinged lid. Grasp the top of the mesh  
filter and pull upwards to remove. Wash in  
warm soapy water and dry thoroughly before  
replacing in the kettle.  
Even in soft water areas it is important  
to descale your kettle regularly to help  
maintains its lifecyle.  
To remove this build-up, use Sunbeam Liquid  
Descaler, a simple to use, non-toxic cleaner  
available from Sunbeam Appointed Service  
Agents.  
Alternatively:  
1.Fill the kettle with 3 cups of white vinegar  
and the remainder with water and allow to  
stand overnight. DO NOT BOIL.  
2.Empty the solution from the kettle. Any  
stains remaining inside the spout can be  
removed by rubbing with a damp cloth. Fill  
the kettle with clean water, bring to boil  
and then discard the water. Repeat and the  
kettle will then be ready to use.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Sunbeam  
2 Year Element  
Guarantee  
Sunbeam has built its reputation  
on manufacturing quality electrical  
appliances. Our Cafe Series® Variable  
Temperature Kettle is constructed from  
the highest quality materials. So much  
so, we guarantee our Kettle element for  
(2) two years against faulty materials  
or manufacture. This guarantee is just  
another expression of our confidence in  
the way we make appliances at Sunbeam.  
In order to be eligible for this guarantee,  
you must retain your receipt as proof of  
purchase.  
If a fault should develop with the element  
The benefits given to you by this guarantee  
are in addition to your other rights and  
remedies under any laws which relate to  
the appliance.  
after the period covered by the 12 Month  
Replacement Guarantee, please call  
Sunbeam Customer Service on the number  
listed below or send a written claim to  
Sunbeam at the address listed below.  
On receipt of your claim, Sunbeam will  
advise you on how to obtain a replacement  
element if your element is defective.  
Alternatively, you can return the Cafe  
Series® Variable Temperature Kettle to any  
of Sunbeam’s authorised service centres,  
together with your receipt. The service  
centre will examine the element and if it  
is faulty or defective, the element will be  
replaced free of charge.  
Our goods come with guarantees that  
cannot be excluded under the Australian  
Consumer Law and under the New Zealand  
Consumer Guarantees Act. In Australia you  
are entitled to a replacement or refund for  
a major failure and for compensation for  
any other reasonably foreseeable loss or  
damage. You are also entitled to have the  
goods repaired or replaced if the goods fail  
to be of acceptable quality and the failure  
does not amount to a major failure.  
Your Cafe Series® Variable Temperature  
Kettle is covered for the first year against  
faulty material or manufacture by  
the Sunbeam 12 Month Replacement  
Guarantee. Should you experience any  
difficulties with your appliance within  
this 12 Month period, please phone our  
customer service line for advice on 1300  
881 861 in Australia, or 0800 786 232 in  
New Zealand.  
IMPORTANT NOTE  
For a complete list of Sunbeam’s authorised  
service centres visit our website or call:  
Sunbeam agrees to replace the element in  
the event of the element developing a fault  
or defect, within the one year after the  
12 Month Replacement Guarantee.  
Sunbeam Corporation Ltd.  
Australia  
As your Cafe Series® Variable Temperature  
Kettle needs to be assessed at a Sunbeam  
authorised service centre, it will not be  
accepted through retail stores.  
1300 881 861  
Units 5 & 6, 13 Lord Street  
Botany NSW 2019 Australia  
The Sunbeam (2) two year element  
guarantee begins from date of purchase  
and extends for one year beyond the 12  
Month Replacement Guarantee. It covers  
only the element, guaranteeing it against  
faulty materials or manufacture. It does  
not cover damage caused by accident,  
misuse or being used in a manner not  
in accordance with the Instruction Book.  
Similarly, this element guarantee does not  
cover freight or any other costs incurred in  
making a claim.  
If using the Cafe Series® Variable  
Temperature Kettle for commercial use this  
element guarantee is limited to 12 months  
from the date of purchase.  
Sunbeam Corporation Ltd.  
New Zealand  
0800 786 232  
26 Vestey Drive, Mt Wellington  
Auckland, New Zealand  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12 Month Replacement Guarantee  
In the unlikely event that this appliance develops any malfunction  
within 12 months of purchase (3 months commercial use) due  
to faulty materials or manufacture, we will replace it for you free  
of charge.  
Should you experience any difficulties with  
your appliance, please phone our customer  
service line for advice on 1300 881 861 in  
Australia, or 0800 786 232 in New Zealand.  
Alternatively, you can send a written claim  
to Sunbeam at the address listed below.  
On receipt of your claim, Sunbeam will  
seek to resolve your difficulties or, if the  
appliance is defective, advise you on how  
to obtain a replacement or refund.  
In Australia you are entitled to a  
replacement or refund for a major failure and  
for compensation for any other reasonably  
foreseeable loss or damage. You are also  
entitled to have the goods repaired or  
replaced if the goods fail to be of acceptable  
quality and the failure does not amount to  
a major failure.  
Should your appliance require repair or  
service after the guarantee period, contact  
your nearest Sunbeam service centre.  
Your Sunbeam 12 Month Replacement  
Guarantee naturally does not cover misuse  
or negligent handling and normal wear and  
tear.  
For a complete list of Sunbeam’s authorised  
service centres visit our website or call:  
Australia  
Similarly your 12 Month Replacement  
Guarantee does not cover freight or any other  
costs incurred in making a claim. Please  
retain your receipt as proof of purchase.  
1300 881 861  
Units 5 & 6, 13 Lord Street  
Botany NSW 2019 Australia  
The benefits given to you by this guarantee  
are in addition to your other rights and  
remedies under any laws which relate to the  
appliance.  
New Zealand  
0800 786 232  
26 Vestey Drive, Mt Wellington  
Auckland, New Zealand  
Our goods come with guarantees that cannot  
be excluded under the Australian Consumer  
Law and under the New Zealand Consumer  
Guarantees Act.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Need help with your appliance?  
Contact our customer service team or visit  
our website for information and tips on  
getting the most from your appliance.  
In Australia  
Or call 1300 881 861  
In New Zealand  
Or call 0800 786 232  
is a registered trademark.  
Cafe Series’ logo and words are registered trademarks of  
Sunbeam Corporation.  
Made in China.  
Due to minor changes in design or otherwise,  
the product may differ from the one shown in this leaflet.  
© Copyright. Sunbeam Corporation Limited 2006.  
ABN 45 000 006 771  
Sunbeam Corporation is a division of GUD Holdings Ltd.  
Units 5 & 6, 13 Lord Street  
Botany NSW 2019 Australia  
Unit 3, Building D  
26 Vestey Drive  
Mt Wellington Auckland  
New Zealand  
03/12  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sentry Industries Clock Radio HR100 User Manual
Shark Iron GI576 User Manual
Singer Sewing Machine 11W8 User Manual
Singer Sewing Machine 114W121 User Manual
Sony Cell Phone LT30p User Manual
Sony Home Theater System HTSS370 User Manual
Southbend Fryer BELM 30 User Manual
Spendor Speaker System SR5 Loudspeaker User Manual
Star Manufacturing Food Warmer 11RW User Manual
Sunbeam Scale 78411 04 User Manual