P R O V E N T I L AT I O N H O O D S
USE & CARE INFORMATION
Download from Www.Somanuals.com. All Manuals Search And Download.
I N T RO D U C I N G WOLF PRO VENTILATION HOODS
THANK YOU
Your purchase of a Wolf Pro ventilation hood
attests to the importance you place upon the
quality and performance of your cooking
equipment. We understand this importance
and have designed and built your ventilation
hood with quality materials and workmanship
to give you years of dependable service.
C O N TAC T
I N F O R M AT I O N
We know you are eager to start cooking, but
before you do, please take some time to read
this Use & Care Information. Whether you are
a beginning cook or an expert chef, it will be
to your benefit to familiarize yourself with the
safety practices, features, operation and care
recommendations of the Wolf Pro ventilation
hood.
Wolf Customer
Service:
800-332-9513
Website:
wolfappliance.com
We appreciate your choice of a Wolf
Appliance product and welcome any sugges-
tions or comments you may have. To share
your opinions with us, call 800-332-9513.
Your Wolf ventilation hood is protected by a
warranty that is one of the finest in the
industry. Take a moment to read the warranty
statement on page 15 and refer to it should
service become necessary.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
S A F E T Y I N S T RU C T I O N S A N D P R E C AU T I O N S
Read this Use & Care Information
carefully before using your new
To reduce the risk of fire and to
ventilation unit to reduce the risk of
properly exhaust air, be certain to
fire, electrical shock or injury to
duct air outside. Do not vent
persons.
exhaust air into spaces within
walls or ceilings or into attics,
crawl spaces or garages.
To reduce the risk of fire, electric
shock or injury to persons,
observe the following:
Follow the heating equipment
manufacturer’s guidelines and safety
standards, such as those published
by the National Fire Protection
Association (NFPA), the American
Society for Heating, Refrigeration
and Air Conditioning Engineers
(ASHRAE) and the local code
authorities.
Use this unit only in the manner
intended by Wolf Appliance
Company. If you have questions,
contact us at 800-332-9513.
Before servicing or cleaning unit,
switch power off at service panel
and lock the service disconnecting
means to prevent power from being
switched on accidentally. When the
service disconnecting means cannot
be locked, securely fasten a
When cutting or drilling into wall or
ceiling, do not damage electrical
wiring or other hidden utilities.
To reduce the risk of fire or electric
shock, do not use this hood with an
additional speed control device.
prominent warning device, such as
a tag, to the service panel.
Ducted fans must always be vented
to the outdoors.
Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards,
including fire-rated construction
codes and standards.
To reduce the risk of fire, use only
metal ductwork.
This unit must be grounded.
For best capture of cooking
impurities, the bottom of the hood
should be a minimum of 30" (762)
and a maximum of 36" (914) above
the countertop.
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel-
burning equipment to prevent
backdrafting.
Please read specification label on
product for further information and
requirements.
To reduce the risk of electric
shock, this fan should only be
used with fan speed control
CM-18RSTUZ (805330), manufac-
tured by Trivar Laboratories, Inc.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
TO REDUCE THE RISK OF A COOKTOP
GREASE FIRE:
USE AN EXTINGUISHER ONLY IF:
You know you have a Class ABC
extinguisher and you already know
how to operate it.
Never leave surface units
unattended at high settings.
Boilovers cause smoking and greasy
spillovers that may ignite. Heat oils
slowly on low or medium settings.
The fire is small and contained in
the area where it started.
The fire department is being called.
Always turn hood ON when cooking
at high heat or when flambéing food
(i.e. Crepes Suzette, Cherries
You can fight the fire with your back
to an exit (NFPA Fire Safety Tips).
Jubilee, Peppercorn Beef Flambé).
Clean ventilating fans frequently.
Grease should not be allowed to
accumulate on fan or filter.
For general ventilating use only.
Do not use to exhaust hazardous
or explosive materials and vapors.
Use proper pan size. Always use
cookware appropriate for the size of
the surface element.
To avoid motor bearing damage and
noisy and/or unbalanced impellers,
keep drywall spray, construction
dust, etc., off blower.
TO REDUCE THE RISK OF INJURY
TO PERSONS IN THE EVENT OF
A GREASE FIRE, OBSERVE THE
FOLLOWING:
Two installers are recommended
because of the large size and weight
of this hood.
Smother flames with a close-
fitting lid, baking sheet or other
metal tray, then turn off the gas
burner. Be careful to prevent
burns. If the flames do not go out
immediately, evacuate and call
the fire department.
Your hood motor has a thermal
overload that will automatically
shut off the motor if it becomes
overheated. The motor will restart
when it cools down. If the motor
continually shuts off and restarts,
contact a Wolf authorized service
center.
Do not use water, including wet
dishcloths or towels—a violent
steam explosion will result.
Avoid using food products that
produce flames under the wall hood
or island hood.
Never pick up a flaming pan—
you may be burned.
Take care when using cleaning
agents or detergents.
Dimensions in parentheses are in
millimeters unless otherwise specified.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD F E AT U R E S
PRO LOW-PROFILE WALL H O O D S
22" (559) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067)
and 48" (1219) widths
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Classic stainless steel finish
Halogen lighting with two settings
Low-Profile Wall Hood
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Transition with backdraft damper included
Internal, in-line and remote blower options
UL listed to US and Canadian safety
standards
Low-Profile Wall Hood
(R) Rail Option
Heavy-duty, 16-gauge brushed stainless
steel construction
UL approved for covered outdoor
applications
Stainless steel enclosed liner
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
Recessed easy-access controls
Infinite-speed blower control
L OW- P RO F I L E WA L L H O O D
Model W482210R shown
Hand-finished
craftsmanship
Classic stainless
steel finish
Decorative rail
(optional)
Backdraft damper
Welded seams
and hemmed edges
Stainless steel
baffle filters
Location of rating
plate
Recessed easy-
access controls
Halogen lighting
Infinite-speed
blower control
Dimensions in parentheses are in
millimeters unless otherwise specified.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD F E AT U R E S
PRO 24" (610) DEEP WALL H O O D S
24" (610) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067),
48" (1219), 54" (1372), 60" (1524) and 66"
(1676) widths
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Halogen lighting with two settings
24" (610) Wall Hood
Classic stainless steel finish
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Transition with backdraft damper included
UL listed to US and Canadian safety
standards
Internal, in-line and remote blower options
24" (610) Wall Hood
(R) Rail Option
Heavy-duty, 16-gauge brushed stainless
steel construction
UL approved for covered outdoor
applications
Stainless steel enclosed liner
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
WO L F
2 4 " ( 6 1 0 ) D E E P WA L L H O O D
WA R R A N T Y
Model W482418R shown
Wolf products are
covered by a two
and five year
Hand-finished
craftsmanship
Classic stainless
steel finish
Decorative rail
(optional)
residential warranty
(exclusions apply).
See warranty
Backdraft damper
Welded seams
and hemmed edges
details at the end
of this guide.
Stainless steel
baffle filters
Location of rating
plate
Recessed easy-
access controls
Halogen lighting
Infinite-speed
blower control
7
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD F E AT U R E S
PRO 27" (686) DEEP WALL H O O D S
27" (686) deep wall ventilation hood
available in 30" (762), 36" (914), 42" (1067),
48" (1219), 54" (1372), 60" (1524) and 66"
(1676) widths
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Halogen lighting with two settings
27" (686) Wall Hood
Classic stainless steel finish
Heat lamps—two R40 250-watt maximum
bulbs required (bulbs not included)
Rail option wall hoods (R) come with a
classic stainless steel decorative rail and
stand-offs—optional platinum or brass rail
available to match dual fuel range bezels
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Internal, in-line and remote blower options
27" (686) Wall Hood
(R) Rail Option
Transition with backdraft damper included
Heavy-duty, 16-gauge brushed stainless
steel construction
UL listed to US and Canadian safety
standards
Stainless steel enclosed liner
UL approved for covered outdoor
applications
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
Recessed easy-access controls
Infinite-speed blower control
2 7 " ( 6 8 6 ) D E E P WA L L H O O D
Model W482718R shown
Hand-finished
craftsmanship
Classic stainless
steel finish
Decorative rail
(optional)
Backdraft damper
Welded seams
and hemmed edges
Stainless steel
baffle filters
Location of rating
plate
Heat lamps
Halogen lighting
Infinite-speed
blower control
Recessed easy-
access controls
Dimensions in parentheses are in
millimeters unless otherwise specified.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD F E AT U R E S
PRO ISLAND H O O D S
Island ventilation hood available in 36"
(914), 42" (1067), 54" (1372) and 66" (1676)
widths
Heat Sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
Classic stainless steel finish
Halogen lighting with two settings
Island Hood
Rail option island hoods (R) come with
classic stainless steel decorative rails and
stand-offs for both sides of the hood—
optional platinum or brass rails available to
match dual fuel range bezels
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters and
grease cups
Transition with backdraft damper included
UL listed to US and Canadian safety
standards
Internal, in-line and remote blower options
Island Hood
(R) Rail Option
Heavy-duty, 16-gauge brushed stainless
steel construction
UL approved for covered outdoor
applications
Stainless steel enclosed liner
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
Continually welded seams, hemmed edges
and sides, and hand-finished craftsmanship
Recessed easy-access controls
Infinite-speed blower control
WO L F
I S L A N D H O O D
WA R R A N T Y
Model I543418R shown
Wolf products are
covered by a two
and five year
Hand-finished
craftsmanship
Classic stainless
steel finish
Decorative rail
(optional)
residential warranty
(exclusions apply).
See warranty
Backdraft damper
Welded seams
and hemmed edges
details at the end
of this guide.
Stainless steel
baffle filters
Location of rating
plate
Recessed easy-
access controls
Halogen lighting
Infinite-speed
blower control
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD F E AT U R E S
PRO HOOD L I N E R S
Stainless steel enclosed liner with seamed
construction
Halogen lighting with two settings
Removable, dishwasher-safe, restaurant-
grade stainless steel baffle filters
Available for use with 30" (762), 36" (914), 42"
(1067), 48" (1219), 54" (1372) and 60" (1524)
custom hoods
Pro Hood Liner
Transition with backdraft damper included
Two and five year residential warranty
(exclusions apply); see warranty at the end
of this guide
Internal, in-line and remote blower options
Recessed easy-access controls
Infinite-speed blower control
Heat sentry feature automatically turns unit
on when heat is sensed and automatically
adjusts blower speed
P RO H O O D L I N E R
Model L462212 shown
Stainless steel
enclosed liner
Seamed
construction
Backdraft damper
Stainless steel
baffle filters
Location of rating
plate
Recessed easy-
access controls
Halogen lighting
Infinite-speed
blower control
Dimensions in parentheses are in
10
millimeters unless otherwise specified.
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD U S E & C A R E
R E C E S S E D CONTROLS
HEAT SENTRY F E AT U R E
Controls for Pro ventilation hoods and hood
liners are recessed under the front edge of the
hood. Refer to the illustration below.
Heat Sentry feature turns the ventilation hood
on when heat is sensed and adjusts the blower
speed automatically. The Heat Sentry feature is
activated when the exhaust temperature from
the hood reaches 200˚F (95˚C) and deactivated
when the exhaust temperature decreases to
186˚F (85˚C).
L I G H T C O N T RO L
The left rotary switch operates the halogen
lights. There are two settings, HIGH and LOW.
The LOW setting can be used as a night-light.
From the OFF position, turn the switch to the
desired light setting, left for LOW and right for
HIGH light setting.
At 200˚F (95˚C) the blower motor will automati-
cally adjust to HIGH speed. When the sensor
cools down to 186˚F (85˚C) it adjusts the blower
back to the setting that is set on the blower
control. For example, if blower motor is in LOW
speed and threshold temperature is reached,
the blower will increase to HIGH speed.
H E AT L A M P C O N T RO L
If your hood is equipped with heat lamps, a
center rotary switch will control the lamps.
Each heat lamp may function independently or
both lamps may be activated simultaneously
from the single switch. From the OFF position,
simply turn the switch to the right to activate
the right heat lamp or to the left to activate the
left lamp. When the switch is in the vertical
position, both heat lamps will be activated.
FILTER R E M OVA L
To remove the stainless steel filters, push each
filter up at the angle it is placed in, and rotate
down. Remove the center filter first. Take out
the grease cups (if applicable) placed on the
bottom edge of the hood coinciding with the
bottom edge of the filters. Gloves should be
worn to provide the proper grip. Reinstall using
the reverse procedure as shown in the illustra-
tion below. Outer filters may need to be pushed
over while the center filter is reinstalled.
B L OW E R C O N T RO L
The right rotary switch that operates the
blower is variable, allowing infinite control of
the blower speed. Rotate the switch fully
counterclockwise to turn the blower off.
IMPORTANT NOTE: DO NOT operate the
ventilation hood without the filters. This may
cause damage to the blower or other internal
components of the hood.
Blower
Control
Spring
Heat Lamps
Control
Halogen
Lights Control
Filter
Grease Cup
SIDE VIEW
Recessed controls
Filter reinstallation
11
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD U S E & C A R E
HALOGEN L I G H T I N G
CLEANING A N D CARE
All Wolf Pro ventilation hoods and hood liners
have halogen lighting with two settings.
Halogen bulbs are included with the hood.
Most surfaces of your Wolf Pro hood are
stainless steel. Although resistant to most
stains, it is not totally impervious to damage.
Pro wall hoods, 30" (762), 36" (914) and 42"
(1067) wide require two 50W, 120V par 20
halogen bulbs. 48" (1219), 54" (1372), 60"
(1524) and 66" (1676) wide hoods require
three 50W, 120V par 20 halogen bulbs.
G E N E R A L C L E A N I N G
S I G N AT U R E
P O L I S H
Salt and some cooking liquids may pit and
stain the surface. Always remove any film
or spills immediately.
Signature Polish
is available from
Signature Limited
Laboratory,
P.O. Box 13436,
Dayton, Ohio
45413-0436, or
call 877-376-5474
(toll free).
Pro island hoods, 36" (914) and 42" (1067)
wide require two 50W, 120V par 20 halogen
bulbs. 54" (1372) and 66" (1676) wide hoods
require three 50W, 120V par 20 halogen
bulbs.
Avoid using abrasive cleaners. They will
permanently scratch the surface.
Do not use steel wool pads.
Be careful not to soak the rotary switches.
Although they are sealed, excessive
moisture may cause damage to the
controls.
Pro hood liners, 28" (711), 34" (864), 40"
(1016) and 46" (1168) wide require two 50W,
120V par 20 halogen bulbs. 52" (1321) and
58" (1473) wide hood liners require three
50W, 120V par 20 halogen bulbs.
Use a clean cloth or sponge, wipe with
warm water and mild detergent. Rinse and
dry immediately. Apply protective polish,
always in the same direction as the grain.
To replace halogen bulbs, turn off the ventila-
tion hood blower and lights. Once the halogen
bulb is cool, use a soft cloth to unscrew the
bulb and replace.
A spray degreaser will remove fingerprints
and greasy spatters. Spray on a cloth and
wipe surface. Buff dry immediately to avoid
streaking.
Be sure that the bulb is cool before
replacing. Halogen bulbs get hot instantly
and adjacent parts may retain heat.
Apply a protective polish to the surface to
maintain luster and protect against food
stains.
Use white vinegar and water to remove
hard water stains.
HEAT L A M P S
D E C O R AT I V E R A I L
Wolf Pro 27" (686) deep wall hoods are
equipped with two heat lamp locations that
require R40, 250W maximum bulbs. Heat lamp
bulbs are not included with the hood.
Clean the decorative hood rail using warm
soapy water. Then hand dry with a clean,
soft cloth.
To replace, turn off the ventilation hood blower
and lights. Once the heat lamp bulb is cool, use
a soft cloth to unscrew the bulb and replace.
It is not necessary to remove the decorative
rail from the hood assembly. It should be
cleaned in place.
Be careful not to pull or hang on the bar, as
this could damage the hood assembly.
Be sure that the heat lamp bulb is cool
before touching.
Dimensions in parentheses are in
12
millimeters unless otherwise specified.
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F PRO VENTILATION HOOD U S E & C A R E
TROUBLESHOOTING G U I D E
S TA I N L E S S S T E E L F I N I S H
P RO B L E M
P O S S I B L E S O L U T I O N
Use a soft, nonabrasive stainless steel cleaner
like Signature Polish (see side note on page 12)
and apply with a soft lint-free cloth. To bring
out the natural luster, lightly wipe the surface
with a water-dampened microfiber cloth,
followed with a dry microfiber cloth. All work
should follow the same grain direction as the
finish. Best results are obtained by keeping the
cloth in continuous contact with the metal.
Motor and lights
do not operate
A fuse in your home may be blown or the
circuit breaker tripped. Replace the fuse or
reset the circuit breaker.
Electrical connections at the electrical box
may be made incorrectly. Contact your
installer.
Motor runs but lights
will not operate
The bulb may have burned out.
Switch operation may be faulty.
Under no circumstances should you use a
metallic or highly abrasive cleaner or
cloth, as this will damage the finish.
Motor does not
function, but lights
are operational
Check to ensure blower is plugged into
hood receptacle.
Connect motor directly to a supply cord,
bypassing hood. If the motor runs, contact a
Wolf authorized service center to check
switch operation and wiring between hood
and blower.
F I LT E R C A R E
The stainless steel baffle filters and grease
cups (if applicable) should be cleaned approxi-
mately every month, depending on use. You
may need to clean the filters more often if your
cooking style generates large amounts of
grease (for example, frying or wok cooking).
Excessive fan speed
and/or noise
Check to ensure blower wheel is not hitting
side of blower. Adjust if necessary.
Check blower mounting hardware. Tighten
if necessary.
The filters are dishwasher safe and are
designed to fit most dishwashers. Wolf recom-
mends wiping filters and grease cups to
remove any excess grease before placing in
the dishwasher.
Check for obstructions in damper flap and
ductwork.
Check for excessive length of duct run,
number of transitions and elbows, and duct
diameter.
Refer to page 11 for the stainless steel filter
removal and reinstallation procedures.
Low fan speed adjustment may be needed.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
WO L F SERVICE I N F O R M AT I O N
SERVICE I N F O R M AT I O N
When requesting information, literature,
replacement parts or service, always refer to
the model and serial number of your ventila-
tion hood. This information is found on the
product rating plate located inside the left wall
of the hood shell. Refer to the illustration for
your specific model on pages 6–10 for the
location of the rating plate. Record the rating
plate information below for future reference.
P RO D U C T R E G I S T R AT I O N
Register your new Wolf product today so that
we may ensure your satisfaction. You may
register by one of the following options:
C O N TAC T
I N F O R M AT I O N
1) Mail in the completed Wolf Product
Registration Card.
2) Register online at wolfappliance.com
.
Wolf Customer
Service:
800-332-9513
3) Register by phone by calling the Wolf
Customer Service Department at
Model Number
800-332-9513
.
Website:
wolfappliance.com
The model and serial numbers of your appli-
ance are printed on the enclosed Wolf Product
Registration Card. If you provide us with your
e-mail address, we will send you exciting new
product updates and recipes as they become
available, along with information on special
events.
Serial Number
Installation Date
Wolf Authorized Service Center and Phone
Wolf Dealer and Phone
B E F O R E C A L L I N G F O R S E RV I C E
Before calling your Wolf authorized service
center, refer to the Troubleshooting Guide on
page 13. Check the household fuse or circuit
breaker to see if it has been blown or tripped
and that the electrical connection to the
appliance has not been disconnected. A power
outage may also have caused a disruption in
service.
The information and images are the copyright
property of Wolf Appliance Company, Inc.,
an affiliate of Sub-Zero Freezer Company, Inc.
Neither this book nor any information or images
contained herein may be copied or used in
whole or in part without the express written
permission of Wolf Appliance Company, Inc.,
an affiliate of Sub-Zero Freezer Company, Inc.
©Wolf Appliance Company, Inc. all rights
reserved.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
W O L F A P P L I A N C E P R O D U C T S
L I M I T E D W A R R A N T Y
RESIDENTIAL USE ONLY
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Wolf Appliance product warranty covers all
parts and labor to repair or replace any part of the product that proves to be defective in materials
or workmanship. All service provided by Wolf Appliance Company under the above warranty must
be performed by a Wolf Appliance authorized service center, unless otherwise specified by Wolf
Appliance Company. Service will be provided in the home during normal business hours.
LIMITED THIRD THROUGH FIFTH YEAR WARRANTY
From the third through fifth year from the date of original installation, Wolf Appliance Company will
repair or replace the following parts that prove to be defective in materials or workmanship. Labor to
remove and replace defective parts is not covered. Wolf Appliance Company recommends that you
use a Wolf Appliance authorized service center to perform such service.
Gas Burners (excluding appearance), Electric Heating Elements, Blower Motors (vent hoods),
Electronic Control Boards, Magnetron Tubes and Induction Generators
LIMITED LIFETIME WARRANTY
For the life of the product, Wolf Appliance Company will repair or replace any BBQ body or BBQ hood
that rusts through due to defective material or workmanship. Labor to remove and replace defective
parts is not covered. Wolf Appliance Company recommends that you use a Wolf Appliance author-
ized service center to perform such service.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only
to products installed in any one of the fifty states of the United States, the District of Columbia or
the ten provinces of Canada. This warranty does not cover any parts or labor to correct any defect
caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT WOLF
APPLIANCE COMPANY, INC. WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY
WARRANTY ARISING BY OPERATION OF LAW. WOLF APPLIANCE COMPANY, INC. WILL NOT BE
RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM THE
BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS, IMPLIED OR
STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and
you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of the Wolf Appliance authorized service center
nearest you, contact Wolf Appliance Company, Inc., P.O. Box 44848, Madison, Wisconsin 53744;
check the Locator section of our website, wolfappliance.com, or call 800-332-9513.
*Stainless Steel (classic, platinum and carbon) doors, panels and product frames are covered by a
limited 60 day parts and labor warranty for cosmetic defects.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
WOLF APPLIANCE COMPANY, INC.
P. O. BOX 44848
MADISON, WI 53744
800-332-9513
WOLFAPPLIANCE.COM
809341
7 / 2006
Download from Www.Somanuals.com. All Manuals Search And Download.
|