StarTechcom Server SV1115IPEXT User Manual

External KVM control over IP  
Server Remote Control External KVM control over IP  
SV1115IPEXT  
Instruction Manual  
Actual product may vary from photo  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Table of Contents  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Required cables and hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1  
Installing SV1115IPEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Connecting to the host computer and network . . . . . . . . . . . . . . . . . . . . . . . . .3  
Using PS/2 keyboard and mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3  
Using USB keyboard and mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4  
Connecting a local keyboard, mouse and monitor . . . . . . . . . . . . . . . . . . . . . . .6  
Connecting console devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6  
Disabling mouse acceleration on host computer . . . . . . . . . . . . . . . . . . .6  
Configuring SV1115IPEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Web configuration using the OSD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Web configuration using DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Web configuration using a static IP address . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Terminal configuration using a serial cable . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Using the Web interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
The login screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Web Interface introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Main Menu selections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Home . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
File transfer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Floppy mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
RAMdisk mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Disk formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
CD-ROM mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14  
Booting from USB disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Logout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
VNC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Network Config . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
DHCP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
IP Address and routing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Domain Name Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Ethernet Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Ethernet Bridging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
User Accounts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
System Ident . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17  
Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
RADIUS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Serial Ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Time/Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
Manual upload . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Auto Self Upgrade . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Purchase options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Port Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Help menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Site map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Copyright menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Using the Terminal Interface via Serial Port . . . . . . . . . . . . . . .21  
Accessing the VNC Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
Native VNC Client . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .22  
SSH Tunnel (with Native VNC client) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Using the VNC Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Bribar feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Main Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
VirtKeys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Video tuning menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Optimizing performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Choose the best video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
Network performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Using the Advanced Video Tuning feature . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Disk Control menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Using the IPMI feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Host Computer requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
If the host computer does not support IPMI . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Connecting the SV1115IPEXT for IPMI control . . . . . . . . . . . . . . . . . . . . . . . .32  
Configuring IPMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Accessing the Status screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Accessing IPMI controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Using the Modem feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Connecting a modem . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Modem configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Configuring the remote connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
ii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Accessing the Web Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
Serial Remote Control operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Connecting Serial Remote Control modules . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Configuring/viewing Remote Control modules via Web Interface . . . . . . . . . .40  
Advanced configuration using the integrated SSH shell . . . . . . . . . . . . . . . . .41  
Remote login via SSH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
About Security Certificate warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Introduction  
Thank you for purchasing a StarTech.com SV1115IPEXT Server Remote Control. Using  
the Internet or your TCP/IP enabled network, you can now remotely monitor and control  
critical PC servers and workstations using an industry-standard Web browser or VNC  
client.  
Features  
• Supports industry-standard networking and management protocols (i.e.TCP/IP and  
SNMP)  
Offers secure management options including SSL encryption, SSH tunneling, and  
RADIUS authentication  
Allows for disk emulation and file transfers, including completely remote application  
and operating system installations  
Transfers data at speeds up to 920 Kbits/sec  
Platform independent: can be managed using any Java-enabled Web browser and  
connected to virtually any host server or computer that supports PS/2 or USB input  
devices  
On Screen Display offers convenient control and configuration options  
Contents  
This package should contain:  
• 1 x SV1115IPEXT unit  
• 1 x Power adapter  
• 1 x Power cord  
• 1 x Integrated PS/2 and VGA Switchbox cable  
• 1 x Instruction Manual  
Required Cables and Hardware  
The included integrated KVM cable will allow you to connect the SV1115IPEXT to most  
IBM compatible computers. Depending on your requirements and how you wish to  
handle the initial configuration of the unit, you may wish to use the following additional  
cables and hardware.  
All applications  
• 1 x Straight-through Ethernet patch cable (to connect the unit to your LAN)  
StarTech.com part number: M45PATCHxxxx  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
To use the optional dedicated WAN port  
• An additional straight-through Ethernet patch cable to connect the unit directly  
to a dedicated WAN/Internet connection  
StarTech.com part number: M45PATCHxxxx  
Configuration via serial port  
• 1 x Straight-through RS-232 serial cable with 9-pin DB9 male/female  
connectors  
StarTech.com part number: MXT100  
–or—  
• 1 x Null modem RS-232 serial cable with 9-pin DB-9 female/female  
connectors  
StarTech.com part number: SCNM9FF  
To use USB connections on host and/or virtual disk emulation  
• 1 x USB Type A to B cable  
StarTech.com part number: USBFAB_3  
To install the SV1115IPEXT into a rack or cabinet  
• 1 x Rack kit (supports up to two units)  
StarTech.com part number: 1110EXTRACK  
To add a redundant power supply  
• StarTech.com part number: xxxxxxxxxxxxxxxx  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Installing the SV1115IPEXT  
Connecting the Unit to the Host Computer and Network  
Please note: It is important that multiple users not be connected to the same physical  
network.  
Video (IN)  
Host  
Keyboard Mouse  
Host  
USB  
WAN  
LAN  
DCE Serial  
DC  
(IN)  
DC  
(IN)  
(2)  
Local Keyboard, Mouse, Monitor  
(Native PS/2 or optional USB)  
USB Hub (Optional)  
Remote  
User  
Internet/  
Intranet  
USBFAB_3  
(Optional)  
Integrated  
KVM Cable  
Host Computer  
Ethernet Patch Cable(s) for  
LAN/WAN  
Network Infrastructure  
Follow these instructions if the host computer uses a PS/2 keyboard and mouse:  
1. Power down the computer to which the SV1115IPEXT will be connected (host  
computer). If purchased, install the unit in your rack or cabinet following the  
instructions that came with the 1110EXTRACK (optional, not included).  
2. If present, disconnect the existing monitor and PS/2 keyboard/mouse from the host  
computer.  
3. Using the provided integrated KVM cable, locate the end with the male VGA (monitor)  
connector and connect it to the VGA-out connector on the back of the host computer.  
4. Connect the PS/2 keyboard and mouse connectors on the same end of the integrated  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
KVM cable as the male VGA connection you completed in the previous step.  
5. Insert the connectors on the opposite end of the integrated KVM cable (female VGA  
monitor connector, keyboard, mouse) to the Video (IN), Host Keyboard, Host Mouse  
ports on the rear panel of the SV1115IPEXT as appropriate.  
6. Using a Category 5 Ethernet patch cable, connect the LAN connector on the rear  
panel of the SV1115IPEXT to a network data jack (usually on a hub, switch, router, or  
pre-wired wall jack).  
7. Optional: If needed, connect the WAN connector on the rear panel of the  
SV1115IPEXT to a network data jack (usually a hub, switch, router, or pre-wired wall  
jack). For more information on the WAN port, please refer to the section  
Configuring SV1115IPEXT (page 7) for important information.  
8. Important: If you want to continue to use the host computer locally, skip step 10 and  
go directly to “Connecting a Local Keyboard, Mouse, and Monitor” after completing  
step 9. Otherwise, complete steps 9 and 10 now and continue to Configuring  
SV1115IPEXT (page 7).  
9. Connect the power cord (provided) to an appropriate electrical outlet, plug the  
opposite end of the power cord into the AC/DC adapter, and insert the power  
connector into either the DC-in or DC-in-2 port on the rear panel of the unit. The LED  
underneath the power connectors will be solid green when the unit is powered.  
IMPORTANT: If you wish to add power redundancy to the unit, simply connect the  
optional second AC/DC adapter to the unit following the instructions in step 9 above.  
This provides a load-balancing feature between the two power sources and allows the  
unit to function if one adapter fails. *Please note: The additional power supply used  
with SV1110IPEXT can NOT be used with SV1115IPEXT.  
10. Power on the host computer.  
Follow these instructions if the host computer uses a USB keyboard and mouse:  
IMPORTANT: Not all computers fully support USB mice and keyboards and recognize  
them on startup. It is strongly recommended that you test the USB devices you will use  
with the host computer before configuring the SV1115IPEXT. If the computer does not  
work properly with USB devices, you can attempt to update the computer’s BIOS to the  
most recent version to see if it adds USB input device functionality. Consult your  
computer manufacturer for details.  
1. Power down the computer to which the SV1115IPEXT will be connected (host  
computer). If purchased, install the unit in your rack or cabinet following the  
instructions that came with the 1110EXTRACK (optional, not included).  
2. If present, disconnect the existing monitor and USB keyboard/mouse from the host  
computer.  
3. Using the provided integrated KVM cable, locate the end with the male VGA (monitor)  
connector and connect it to the VGA-out connector on the back of the host computer.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
4. Insert the female VGA connector on the opposite end of the integrated KVM cable to  
the Video (IN) port on the rear panel of the SV1115IPEXT.  
5. Connect a USB Type A to B cable to the USB port on the rear panel of the KVM.  
6. Connect the opposite end of the USB Type A to B cable to an available USB port on  
the managed computer.  
7. Using a Category 5 Ethernet patch cable, connect the LAN connector on the rear  
panel of the SV1115IPEXT to a network data jack (usually on a hub, switch, router, or  
pre-wired wall jack).  
8. Optional: If needed, connect the WAN connector on the rear panel of the  
SV1115IPEXT to a network data jack (usually a hub, switch, router, or pre-wired wall  
jack).  
9. Important: If you want to continue to use the host computer locally, skip step 11 and  
go directly to Connecting a Local Keyboard, Mouse, and Monitor (next page) after  
completing step 10. Otherwise, complete step 11 now and continue to the section  
entitled Configuring SV1115IPEXT (page 7).  
10. Connect the power cord (provided) to an appropriate electrical outlet, plug the  
opposite end of the power cord into the AC/DC adapter, and plug the power  
connector into either the DC-in or DC-in-2 ports on the rear panel of the unit. The  
LED underneath the power connectors will be solid green when the unit is powered.  
11. Power on the host computer.  
NOTE: If you are using cables other than those provided in the SV1115IPEXT package  
or branded by StarTech.com, ensure that the cables are of high quality and use the  
minimum possible distance necessary. Low quality or excessively long (particularly  
video) cables between the host computer and the SV1115IPEXT could degrade  
performance.  
NOTE: In the event that you do not have enough integrated USB ports available on the  
managed computer to directly connect the keyboard, mouse, and SV1115IPEXT, you  
may use a high-quality USB hub on one of the computer’s USB ports to make all of the  
connections.  
IMPORTANT: The SV1115IPEXT is convection-cooled. As such, please ensure the  
vents on both sides are unobstructed.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Connecting a Local Keyboard, Mouse, and Monitor  
DTE Serial  
R Port  
USB 1, 2, 3  
Local  
Keyboard Mouse  
Local  
Local  
Video  
Reset  
Button  
SV1115IPEXT has the capability to connect a local keyboard, mouse, and monitor to the  
host computer for maintenance and monitoring, allowing users to physically use the host  
computer as though SV1115IPEXT were transparent. If needed, the unit can be run  
through a typical KVM switch like any other computer. Using a KVM cable, you can  
connect the Server Remote Control’s host computer inputs to the “console” connectors  
on a KVM switch allowing you to control more than one computer remotely using a single  
Server Remote Control. If you want to use SV1115IPEXT through a KVM switch, consult  
the documentation that came with the switch for more details on how to make the  
necessary connections. See the section entitled Configuring the SV1115IPEXT for more  
information on using a KVM switch with the SV1115IPEXT.  
To connect console devices:  
1. Connect a standard PS/2 keyboard to the Local Keyboard port on the front panel of  
the SV1115IPEXT.  
2. Connect a standard PS/2 mouse to the Local Mouse port on the front panel of the  
SV1115IPEXT.  
3. Connect a SVGA-compliant monitor to the Video (Out) port on the front panel of  
SV1115IPEXT.  
4. Power on the host computer.  
Disabling Mouse Acceleration on the Host Computer  
Please note: If you are using USB to connect SV1115IPEXT to the host computer, you  
will not be required to adjust the mouse settings on the host computer, as this device  
uses “Absolute” mode, which eliminates any problems you may otherwise experience  
with mouse synchronization or host mouse acceleration.  
Many operating systems offer a feature called mouse acceleration, allowing the user to  
adjust the responsiveness of the cursor on the screen in relation to physical movements  
of the mouse. While this is usually a beneficial interface enhancement, it can interfere  
with the operation of the SV1115IPEXT and should be disabled on the host computer  
before a remote session is attempted. Follow the instructions below to disable mouse  
acceleration for the operating system installed on the host computer.  
Windows 98  
1. From the Control Panel, click on Mouse.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
2. From Mouse Properties, click on the Motion tab.  
3. Make sure the Pointer speed bar is centered and Acceleration is set to None.  
Windows 2000  
1. From the Control Panel, Click on Mouse.  
2. From Mouse properties, click on the Motion tab.  
3. Make sure that the Pointer speed bar is centered and Acceleration is set to None.  
Windows XP and Windows Server 2003  
1. Go to Pointer Options and turn off Enhance Pointer Precision and ensure that the  
pointer speed bar is centered.  
Linux, Unix and X-Windows  
1. Add this command to your xinitrc, xsession or other startup script:  
xset m 0/0 0 (For more information, please refer to Troubleshooting)  
Configuring SV1115IPEXT  
SV1115IPEXT offers four distinct methods for configuring the unit for your network.  
Which method will work best will depend on your level of experience and your specific  
network configuration.  
Web Configuration Using the On-Screen Display  
Upon boot-up, including following a reset, SV1115IPEXT will display a window on the  
local video output (front VGA connector), that will appear as follows:  
The initial screen will display the IP address assigned by your existing DHCP server (if  
present on your network). If no DHCP server is detected, a factory assigned IP address  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
will be displayed in its place (10.0.0.15 by default). Please make note of the assigned IP  
address, as you will need to enter it into your web browser to access the Web Interface.  
If static IP addresses are assigned, you will likely need to change the Net Mask, IP  
Address and other details, prior to connecting via your Web browser. If this is the case,  
connect a local keyboard (USB or PS/2) and press the Enter key. In order to proceed,  
you will require an administrative username and password. By default, the username  
and password are admin. You will be given the opportunity to change the password  
(recommended) once the configuration is complete.  
Alternatively, you may press the Setup button on the front panel, and you will not be  
asked to enter the admin password if you just press Enter.  
At the main OSD menu (pictured below), you will be given several basic setup options.  
To configure SV1115IPEXT to your required network settings, use the Network Setup  
Wizard. To select from the menus provided, use the arrow keys on your keyboard. At  
any time, you can return to the previous menu by pressing the Page Up key.  
Web Configuration Using DHCP  
This method requires that your network implement DHCP (Dynamic Host Configuration  
Protocol), usually on a server or network access device such as a router that dynamically  
allows devices to join the network without pre-configuration. It also assumes that you will  
have easy access to your network’s DHCP log, since you will need to know the IP  
address of the unit to complete the configuration over your Web browser. (If you are  
unsure of how to access your network’s DHCP log, contact your System Administrator for  
details.) If the unit is powered on and connected to the network via LAN port on the rear  
panel, it will automatically attempt to lease an IP address using DHCP. Before you can  
begin the configuration process, you will need to access the DHCP log from your file  
server or other device that acts as the DHCP server on the network. A simple DHCP log  
looks similar to the following:  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
The information displayed for your own network may vary significantly from the data  
displayed in the image, but should supply (at minimum) three essential details: IP  
address, MAC address, and device (or machine) name for the computers and other  
devices connected to your network. The values for the SV1115IPEXT tested above are  
as follows:  
IP Address: 192.168.22.4  
MAC Address: 00-0E-C5-00-08-1A  
Device Name: (none)  
The easiest way to identify your SV1115IPEXT on the network is by its MAC address, a  
unique hardware identifier that is specific to your unit. The MAC address of the unit can  
be found using the OSD setup screen. Write down this number and keep it for future  
reference. Once you locate the MAC address of your unit in the DHCP log, you can  
match it to its leased IP address and proceed with the Web configuration.  
NOTE: Once you have located the IP address of the SV1115IPEXT and wish to proceed  
with the Web configuration, do not power off the unit or your DHCP server, since the  
Server Remote Control might lease a different IP address. Should this happen, re-  
examine the DHCP log to verify the IP address again.  
NOTE: DHCP functionality is not affected if you also connected the WAN port on the  
SV1115IPEXT to your network (see below). However, it is not recommended that you  
connect both the WAN and LAN ports to the same network segment.  
Web Configuration Using Static IP  
Since some networks rely on static IP addresses (every device has a pre-configured IP  
address that does not change), the DHCP access method described above is not  
applicable in those situations. To accommodate this type of installation, the WAN port on  
the rear panel of the SV1115IPEXT is factory-configured with its own IP address.  
NOTE: If you connected the LAN port on the rear panel of the unit to your network but  
did not connect the WAN port, you must disconnect the Ethernet cable from the LAN port  
and move it to the WAN port before attempting a static IP installation. (If desired, you  
can return the cable to the LAN port if you configure it with a static IP address during the  
configuration process.) If you have connected both the LAN and WAN ports on the unit  
to your network, you may proceed with a static IP Web configuration.  
The following are the default values for the WAN port, configured at the factory:  
IP Address: 192.168.1.123  
Subnet Mask: 255.255.255.0  
Default Gateway: 192.168.1.254  
Broadcast: 192.168.1.255  
To access the Web configuration for this product, you will need to configure the  
workstation you are using to the same subnet (255.255.255.0) and also assign it a valid  
IP address (i.e. 192.168.1.100). For details on how to change the IP address of your  
computer (if necessary), consult your documentation or System Administrator for  
assistance.  
NOTE: It is advisable to verify whether another device on your network is using the  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
same IP address as the SV1115IPEXT before connecting it to the network, to avoid a  
conflict. Should an IP address conflict occur with another device on the network, power  
off the conflicting device or assign it another IP address before continuing the installation.  
If you are configuring more than a single SV1115IPEXT using the factory default settings  
on the WAN port, they cannot be connected to the network at the same time as they will  
use the same IP address.  
NOTE: Not all IP addresses are valid for a given subnet. If you are required to change  
your subnet (and therefore IP address) to configure the unit, be sure the IP address you  
choose is within the allowable range for the 255.255.255.0 subnet.  
Once your computer is configured to the same subnet as the SV1115IPEXT, you can use  
the IP address 192.168.1.123 to access the Web configuration system.  
Terminal Configuration Using a Serial Cable  
Configuring the SV1115IPEXT using a serial cable is the best choice if you need to pre-  
configure the unit before attaching it to a network, i.e. when sending to a branch office,  
customer site, etc. In general, the Web configuration is preferable because of its intuitive  
interface and the fact that you do not have to be within close physical proximity to  
perform the configuration. However, if you wish to use the serial cable method to  
configure the SV1115IPEXT, you can use any typical communication software package  
(UNIX: tip, cu, kermit, minicom; Windows: HyperTerminal, kermit).  
You can use either serial port on the SV1115IPEXT to access the terminal configuration  
tool; your choice will dictate the type of cable you will use to make the connection. The  
DTE Serial port on the front panel requires the use of a null modem serial cable. The  
DCE Serial port on the rear panel requires the use of a straight through serial cable.  
Connect a female end of a serial cable to the serial port used for serial access on the  
host computer. Connect the opposite end (male if connecting to the DCE Serial port,  
female if connecting to the DTE Serial port) to the SV1115IPEXT. Configure the terminal  
software with “8N1” settings:  
Connection speed: 115200 bps  
No. of bits: 8  
Parity: None  
Stop bits: 1  
Sample HyperTerminal configuration  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Using the Web Interface  
The Web interface is the most intuitive way to configure the SV1115IPEXT. Offering a  
Java-based VNC client that can be used to control the host computer from a remote  
location, as well as support for any industry-standard HTML Web browser. You can  
access the Web interface by opening your Web browser and entering the IP address of  
the SV1115IPEXT you wish to access/configure. The IP address will be either a) the  
address assigned by your DHCP server as identified in the previous section, or b)  
192.168.1.123 if your network uses static IP addressing.  
The Login Screen  
Before you can access the Web configuration interface, you must enter a user name and  
password. The default username and password as shipped from the factory is  
username admin, with a password of admin.  
NOTE: Before the login screen appears, your Web browser may display a warning about  
an invalid security certificate. This does not affect the security of your data in any way.  
Whenever you are prompted about a certificate security problem by your browser or the  
Java VNC client, always choose the option to continue. For more information, please  
consult the section entitled About Security Certificate Warnings (page 42).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Web Interface Introduction  
After the inital login screen, the screen will be divided into several sections, four of which  
will remain on the screen at all times while viewing the Web Interface:  
Name  
Tip Line  
Help area  
Main  
Menu  
Name: At the top of the screen, the name of the machine being controlled is displayed  
Tip line: The area directly below the Name indicates what function each selection from  
the Main Menu performs. Hover the mouse pointer over each individual listing  
in the Main Menu to update this message according to the function performed  
by each listing.  
Main Menu: At the left-most side of each page, the Main Menu is displayed, allowing  
users to choose functions offered by the Web Interface.  
Help area: The right-most column offers an optional help summary for each page. If  
you don’t wish to use this information, it can be closed by clicking the small  
[x] at the top right (within the Web Interface). If closed, click on the Help  
button near the top right of each page to re-display it.  
Please note: While these four sections remain stationary, depending on your selections,  
the center of the page will display the desired content.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Main Menu selections  
Please note: Some of the following items may not be present, based on assigned user  
privileges (i.e. non-admin users will not see any items under the Admin category.)  
The Home screen offers  
a Screen Thumbnail  
view of the controlled  
computer, as well as  
basic file transfer  
functions, Monitoring  
Information, System  
Identification and VNC  
Client options.  
The USB File Transfer  
function allows you to  
upload files to a virtual  
(emulated) USB drive. For more information, please view the Help listing for this section.  
The Preferences screen offers several configuration options,  
pertaining to the functionality of SV1115IPEXT. Here, you will be  
able to customize settings to optimize overall performance, (i.e.  
Encryption options, VNC options, display and bandwidth options  
etc.), according to each user’s individual preferences. Please  
save your selections by clicking the Save Changes button.  
The Snapshots screen allows you to view and save a screenshot  
of the controlled computer in its current state. This screenshot  
will update periodically (automatically). Saved image files are  
stored in .PNG format.  
The SV1115IPEXT is able to emulate a virtual disk drive attached to the host via USB,  
and must have the optional USB cable connected to the SV1115IPEXT and the host  
computer to function. Depending on configuration, it will appear to the host as a floppy  
drive (1.44MB), an 8MB RAMdisk or a CD-ROM. The host computer does not require any  
special drivers or other configuration. You can transfer files to the virtual disk at any time.  
SV1115IPEXT will wait until the host is not using the disk, and add or remove the files.  
When the host computer next looks at the drive, it will notice the changes. You can read  
files from the virtual disk at any time, as long as the host is not actively writing to the  
disk. All of this happens in the background, and you may treat the virtual disk as a  
shared drive without restrictions.  
Access to the files is performed through the web interface. The contents of the root  
directory are shown on the home page. You can download files as you would any file on  
the web (right-click and Save target as). To upload a file, click Browse, select a file, and  
then click Upload. Files and directories may be deleted using the Delete button situated  
to their right.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
When emulating a floppy disk or RAMdisk, the data is stored in RAM on the  
SV1115IPEXT itself. In order to emulate a CD-ROM disk drive, a web server is required  
to provide the CD-ROM image data. The Web server must be accessible to the unit,  
which communicates with it constantly as data is needed.  
Floppy mode  
Choose the Format as floppy button to switch to floppy mode. Under Windows, the drive  
will be identified as a “high density floppy” and will typically be assigned a drive letter of  
B:. The capacity is limited to 1.44 megabytes in this mode. The purpose of supporting  
floppy mode is to permit the use of floppy-disk images generated by other systems. For  
example, the flash BIOS upgrade process is performed with a special floppy and is  
bootable. You can transfer bits from that floppy to the SV1115IPEXT (use the upload disk  
image form). Now, you can boot from the special floppy. In addition, emergency repair  
disks are often restricted to floppies.  
RAMdisk mode  
Choose the Format as ramdisk button to switch to RAMdisk mode. This mode is  
intended to facilitate simple data transfer between the remote user and the host  
computer. It will be recognized by Windows as an eight megabyte removable disk and  
assigned a drive letter. You can easily drag and drop files up to 8MB in size to this  
device. In Windows Explorer, you can choose the Eject option to make the data available  
to remote users.  
Disk Formats  
When you choose the Format as... button, the disk image stored in RAM is formatted as  
an empty MS-DOS disk, with a single file called Put files here...TXT. SV1115IPEXT is  
able to read most MS-DOS/Windows formatted disks and presents the files via the Web  
interface. However, disk emulation occurs at the lowest level so that other disk formats  
can be used, if you have the tools needed to create and read the disk images. At the  
bottom of the page are the upload and download options for the entire disk image. Any  
image that is exactly 1,474,560 bytes long will be treated as a floppy. Images of other  
sizes are supported up to 8MB.  
CD-ROM Mode  
The SV1115IPEXT does not store any data in this mode. Instead, it emulates a USB CD-  
ROM drive with a disk inserted. The data from that disk must be provided by an external  
web server. You will need a copy of the CD-ROM contents that you want to emulate as an  
ISO file. This is a byte-for-byte copy of track one (the data track) of a data CD-ROM. The  
ISO file must be made available on a web server that can be accessed by SV1115IPEXT.  
To switch to this mode, type in a URL pointing to the ISO image, and click on Commit.  
The system will connect to the web server and test the file for access. If successful, you  
will be shown a short report on the file contents, and the disk will be ready to use.  
Currently there is no other way to preview or browse the contents of the CD-ROM image,  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
except from the host.  
CD-ROM Web Server Requirements:  
• Data must be hosted on a web server that the SV1115IPEXT can access directly.  
• An image of a bootable CD-ROM disk can be used by the BIOS to boot an operating  
system.  
• The image file itself may be any size, but it will typically be less than 700 megabytes.  
Normally this file will be an ISO image (an ISO-9660 file system) but any disk image  
may be used.  
• Web server must support “byte ranges”. Persistent connections are used, if available, as  
this greatly improves performance. “Read-only” access is provided; writing is not  
supported.  
• CD-Rom block size must be 2048 bytes. Unfortunately, XA-Data type tracks are not  
supported.  
Booting from USB Disk  
If the host computer's BIOS supports USB boot devices, it is possible to boot from the  
emulated CD-ROM or floppy. This allows complete operating system replacement without  
any on-site intervention.  
The first step is getting a bootable disk image onto the emulated floppy or CD-ROM. For  
CD-ROM images, you will need an ISO image from a disk that contains special bits to  
enable boot (“El Torito” standard). Nothing special is needed when reading the ISO from  
a working, bootable CD-ROM. To create a bootable floppy, you can format the emulated  
floppy from the target system, or read the data from a working boot floppy. This can be  
done from Windows using Disk Copy (right click on the drive letter in the Windows  
Explorer) or by using a program like “RAWRITE”.  
Once you have a bootable image (CD-ROM or floppy) working on the Server Remote  
Control unit, you must adjust your BIOS settings to tell it to boot from a USB device.  
NOTE:You must select USB CD-ROM as the boot device for the BIOS, if using a CD-  
ROM image and USB Floppy if using a floppy image.  
Clicking on Logout will terminate your Web Interface section. To re-initiate the Web  
Interface, you will be required to re-enter your username and password.  
To launch or disconnect a Virtual Network connection with the  
controlled computer, click on Connect or Disconnect as  
appropriate  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
The Admin functions allow you to access all of the features you will need to perform an  
initial configuration of the SV1115IPEXT.  
Dynamic Host Configuration Protocol (DHCP)  
Automatic network configuration using DHCP is: Enabled/Disabled. This feature applies  
only to the LAN port on the rear panel, and is enabled by default. When enabled, the  
unit will automatically configure itself with an IP address when a DHCP server is present.  
When disabled, the LAN port will use the values assigned to it on the IP Addresses and  
Routing table below.  
IP Addresses and Routing  
This table allows you to assign IP information for the LAN and WAN ports separately. If  
you are using DHCP, the values for the LAN port will be filled in automatically and any  
changes made will not affect the setup. If Ethernet Bridging is enabled, the WAN port  
will use the same settings as the LAN port, and any changes will not affect the setup for  
that port. Adjusting the setting for the WAN port allows you greater control over how the  
SV1115IPEXT is configured for access from outside the local network, particularly if a  
firewall or proxy is in use.  
Domain Name Server (optional)  
This section allows you to specify DNS servers and the default DNS domain suffix in use  
on the network. If DHCP is enabled, some of these values may be supplied  
automatically.  
Clicking the Commit button applies any changes made on this page, but leaves the old  
settings active until the next time the unit restarts. Clicking Make changes effective  
now applies the changes and restarts SV1115IPEXT so the new settings take effect  
immediately.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Ethernet Address (MAC Address)  
This is the Ethernet hardware address of this unit's LAN/WAN port. It is set at the factory  
and cannot be changed. You may need this number to configure your DHCP server.  
Ethernet Bridging  
When Ethernet bridging is enabled, the two Ethernet ports are virtually connected inside  
the SV1115IPEXT. Packets arriving on either port that are not meant for it will be  
forwarded out to the other port, when appropriate. IEEE-802.1d (“Spanning Tree  
Protocol”) is implemented to avoid broadcast storms and to determine the topology of the  
network.  
You may connect both the WAN and LAN ports to the same logical network through  
redundant Ethernet switches. If one switch fails, the other will be used. When bridging is  
enabled, both ports share the same configuration (DHCP or static IP addresses) and the  
WAN port may not be separately configured. Using DHCP with Bridging increases boot  
time, because the 802.1d (STP) algorithm must finish before the DHCP broadcast can go  
out. To change this setting, select either Enabled or Disabled from the drop-down menu  
and click Commit and Apply.  
User Accounts  
This menu will allow you to add accounts other than admin to the  
system. These accounts will not have the authority to change  
settings, but can access the Web interface and log into the VNC  
console. Selecting Delete permanently removes the user from the  
system. If you enter values for a user that does not already exist  
under Edit User Details, the system will create that user for you  
when you click Record changes. If the user already exists, you will  
change the password for that user.  
Machine Name  
This is a name that is used to uniquely identify this machine. You  
might want to create a DNS entry that matches this name. The name  
is provided as the Client Name for the DHCP server. It is also shown  
at the top of each page in the web browser interface and is the  
“desktop name” for VNC clients.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Other identification details  
These values are for information purposes. They are visible from the  
VNC client and via SNMP (if enabled).  
Location  
This string is sent as the system.sysLocation value over SNMP. It  
should describe the location of this system.  
Contact Name  
This string is sent as the system.sysContact value over SNMP. It  
should describe who to contact regarding this machine. Typically it  
includes an email address.  
Network Address  
This value is not used in our configuration, but is meant to store a  
user-defined value that identifies the controlled machine on the  
network. The official DNS name of the controlled machine is a  
obvious value to put here, but you may use it for any purpose.  
Description  
A user-defined description for the controlled machine.  
This menu allows you to configure a number of settings, including  
changing the default password for admin (recommended). Read and  
consider the comments and instructions on this menu before making  
any changes, as changing these features could make the unit  
inaccessible through Web configuration (i.e. due to firewall filtering).  
Note that any password changes you make will have to be entered in  
duplicate to prevent the chance for error.  
The Compatibility menu offers features that may offer enhanced  
functionality with certain KVM and power products, such as  
StarTech.com’s Remote Power Switch (PCM8155HNA). These can  
be left at their default values if you are not connecting the unit to a  
KVM or power management device.  
The SNMP menu allows you to configure the SV1115IPEXT so it can  
be recognized and managed using industry-standard Simple Network  
Management Protocol software.  
The RADIUS server requires the IP address, the UDP port number  
(1812 - default or 1645) and the shared secret. The shared secret is  
used to encrypt communications and corresponds to a shared  
password for the RADIUS server and the client machine. Two  
additional servers may be defined for backup purposes. Each server  
will be tried in order, using the indicated number of retries and  
timeout period, which are configurable on the same page.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Remember to enable RADIUS after configuring it. While RADIUS  
authentication is enabled, the locally defined accounts on the Server  
Remote Control unit will not be used, except for the SSH login.  
However, if a user name of the form “name.local” is given at the  
RADIUS prompt, the system will use “name”; check the password  
locally, and skip RADIUS authentication. Delete all local accounts to  
avoid this behavior. When connecting via VNC, a login screen is  
generated that asks for a RADIUS username and password.  
Enable this to allow the modem to answer the phone and start a PPP  
connection.  
Enable modem connections (PPP) via serial port/modem.  
The Serial Ports menu allows you to manage and connect to devices  
connected to the unit using the R-Port on the SV1115IPEXT.  
Date and time are stored without consideration for time zone. If you  
are controlling multiple sites in different time zones, we recommend  
you use UTC (Universal Coordinated Time, also sometimes called  
GMT or Zulu) for all machines.  
If the computer you are using to view this page knows the correct  
time, just press the button to set the time and date to the same time  
as your browser.  
The firmware on the Server Remote Control is field upgradeable. To  
upgrade to another version, login as admin.  
Auto Self Upgrade  
The SV1115IPEXT unit includes an innovative feature allowing it to  
upgrade itself over the Internet. Simply click on the button labeled  
Upgrade to Latest and the unit will go out to the Internet and  
download the latest version of the system firmware and then install it.  
If it cannot access the Internet directly (perhaps due to a web proxy  
or other firewalls), then a page will be shown that causes your  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
browser to download the required file. Save this file to disk and then upload it as  
described in the next section, Manual Upload.  
Manual Upload  
Enter the name of the firmware file that you downloaded from StarTech.com into the field  
provided (or use the Browse... button). Press Start Upload and wait until a successful  
upload message is shown.  
NOTE: Remember the following during the firmware upgrade:  
• Do NOT turn off power to the unit before this operation completes successfully.  
• The unit will sometimes reboot as part of the upgrade procedure, depending on which  
system component is upgraded. You will have to reconnect and re-login in those cases.  
• Wait at least two minutes after pressing Start. Do not assume the upload did not work,  
the upload could simply be slow.  
• Each distributed file upgrades a different component of the system. Be sure to apply all  
files provided as part of an upgrade. The system knows what to do with each file you  
give it, and they are checked for validity before being applied.  
Auto Self Upgrade  
Clicking the Upgrade to latest button will automatically download and install necessary  
revisions. To download upgrades for manual installation, please click on Get latest  
version.  
Purchase Options  
Certain firmware features may be offered separately from the base unit, in order to  
reduce the initial cost for the Server Remote Control unit.  
NOTE: If you wish to upgrade after the system is in operation, go to the Manage  
Firmware page and scroll down to the section entitled Purchase Options.  
Look for a unique code, such as: 4-C80C-B960-1-0. If you provide this code to the  
technical support department, they can give you an unlock code that will open any  
feature you request. Type in the code provided, exactly, into the area provided and click  
Submit. The new features opened by the code will be enabled immediately, but you may  
need to reboot the unit to begin using certain features.  
The Status screen displays a system security log, various system  
settings, and the ability to generate a copy of the system  
configuration in plain text format.  
Port Numbers provides a table allowing you to change TCP port values for services  
available on the SV1115IPEXT. By default, they are factory-set to common Internet  
values. You may wish to enhance security by disabling services that you will not use with  
the unit. To disable a service, change its port number to 0. For flexibility, both the LAN  
and WAN ports can be configured separately. When you have made any necessary  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
changes, click Commit Changes to use the settings the next time the SV1115IPEXT  
restarts. To force the unit to restart immediately, click Restart Servers.  
Help Menu  
Provides an FAQ (Frequently Asked Questions) listing to assist you with the features and  
operation of the SV1115IPEXT.  
Site map Menu  
This menu provides a hyperlinked directory of each setting available on the Web  
configurator.  
Copyright Menu  
Provides the Terms of Use and other information related to the firmware and software on  
the SV1115IPEXT.  
Using the Terminal Interface via Serial Port  
The terminal interface you can access via the serial port permits the configuration of the  
basic settings of the SV1115IPEXT. While not intended to be a substitute for the Web  
interface, it does allow you to configure some of the same functions. The menu list below  
describes the options that can be modified through the terminal interface.  
Note that you must use the W option to confirm and apply any changes made before you  
-----------------------------------  
Server Remote Control Network Setup  
-----------------------------------  
NOTE: This interface is used to set network parameters and perform  
certain recovery procedures, but the majority of setup and  
configuration can only be done using the web interface.  
Primary Ethernet Port (LAN)  
(00:0e:c5:00:08:1a)  
DHCP is enabled. Current lease information:  
IP Address: 192.168.22.4  
Netmask: 255.255.255.0  
Gateway: 192.168.22.1  
Broadcast: 192.168.22.255  
Secondary Ethernet Port (WAN)  
(00:0e:c5:00:08:1b)  
IP Address: 192.168.1.123  
Netmask: 255.255.255.0  
Gateway: 192.168.1.254  
Broadcast: 192.168.1.255  
Ethernet bridge: Disabled  
Machine name: noname  
Commands (press one key, then Enter):  
D - Disable DHCP, and use fixed IP address.  
*
*
*
*
I - Set IP address.  
N - Set netmask.  
G - Set default gateway.  
B - Set broadcast address (optional).  
I2 - Set IP address (WAN).  
N2 - Set netmask (WAN).  
G2 - Set default gateway (WAN).  
B2 - Set broadcast address (WAN, optional).  
E - Ethernet bridging (enable or disable).  
M - Change machine name (DHCP client name).  
H - Reset/disable firewall, TCP ports, SNMP, RADIUS.  
F - Reset everything to factory defaults.  
S - Change system admin password.  
P - Send ICMP ping packets (testing purposes).  
? - Show TCP/IP ports and servers enabled.  
R - Revert to current settings (undo changes).  
W - Commit changes to configuration.  
*
-> These values ignored due to DHCP.  
Choice:  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
exit the terminal session. If you changed the status of the Ethernet Bridging feature,  
you will also need to power the SV1115IPEXT on and off again to enable your changes.  
Accessing the VNC Interface  
There are three ways to communicate with the Server Remote Control unit in order to  
control the host computer:  
Web interface: The integrated Web server includes a Java-based VNC client. This  
allows easy browser-based remote control.  
Native VNC client: There are several third-party software programs that use the  
standard VNC protocol, available in open source and commercial VNC clients.  
SSH access: By default, there is a standard SSH server running on port 22 (the  
standard SSH port). Once connected via SSH, the VNC traffic is tunneled through the  
SSH connection and encrypts the VNC session. Each method will be discussed briefly  
in the following section. The type of encryption method or client used is not critical.  
Web Interface  
Using SV1115IPEXT’s web interface requires a browser, with cookies and JavaScript  
enabled. To start the Java VNC client, login to the Web configuration interface and click  
on the thumbnail of the desktop on the Home menu, or click on the Connect button,  
located in the Main Menu.  
You may need to upgrade Java support in your browser; however, most modern browsers  
come with a version of Java that is compatible with this application. The Java VNC client  
makes a connection back to the Server Remote Control unit over port 5900 (by default)  
or 15900, if encrypted. The encrypted connection is a standard SSL (Secure Socket  
Layer) encrypted link that encrypts all data from the session, including the actual video  
pictures.  
Because Java is considered a “safe” programming language, the Java VNC client has  
some limitations. Certain special keystrokes cannot be sent, such as “Scroll Lock” on the  
keyboard.  
This client software requires the use of Java 2 (JRE 1.4) to enable features like wheel  
ensure your browser and operating system are updated accordingly.  
Native VNC Client  
This system implements the VNC protocol, so any off the shelf VNC client can be used.  
There are over 17 different VNC clients available and they should all work with this  
system. This system automatically detects and makes use of certain extensions to the  
basic RFB protocol that is provided by the leading VNC clients. Depending on your  
needs, there are several popular freeware, shareware, and commercial VNC clients  
available. Contact your system administrator or local software vendor for assistance.  
NOTE: Some native VNC clients may require a flag or setting indicating they should use  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
BGR233 encoding by default. If this flag is not set, you may see a garbled picture and the  
client will fail. The Unix versions of VNC require the flag -bgr233. For examples on using  
this flag, review the commands in the following section.  
SSH Tunnel (with Native VNC client)  
If you are using openssh, here is the appropriate Unix command to use, based on the  
default settings on a machine at 10.0.0.34:  
ssh -f -l admin -L 15900:127.0.0.1:5900 10.0.0.34 sleep 60  
vncviewer -bgr233 127.0.0.1::15900  
Same command, but using the WAN port:  
ssh -f -l admin -L 15900:127.0.0.1:5900 10.0.0.98 sleep 60  
vncviewer -bgr233 127.0.0.1::15900  
Notes:  
• A copy of these commands, with appropriate values filled in for your current system  
setting, is provided in the on-line help page. This allows you to “cut-and-paste” the  
required commands accordingly.  
You have 60 seconds to type the second command before the SSH connection will be  
terminated.  
• The port number “15900” is arbitrary in the above example and can be any number  
(1025...65535). It is the port number used on your client machine to connect your local  
SSH instance with the VNC client. If you want to tunnel two or more systems, you will  
need to use a unique number for each instance on the same SSH client machine.  
• Some Unix versions of the VNC client have integrated SSH tunneling support. Some  
clients require your local user id to be the same as the userid on the system.  
Use a command like this: vncviewer -bgr233 -tunnel 10.0.0.34:22  
Using the VNC Menu  
One of the unique features of this product is the VNC menu system. Whenever you see a  
window with a dark blue background and grey edges, this window has been inserted into  
the VNC datastream so that it is effectively laid over the existing video. These menus  
allow you to control the many features of the SV1115IPEXT without using the web  
interface or a custom client.  
Welcome Window  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
When you initially connect to the system, a Welcome Window will appear, indicating  
which system you are controlling, what encryption algorithm was used and what key  
strength is currently in effect. Click anywhere inside the window to clear it, or wait ten  
seconds.  
Bribar Feature  
Along the bottom of the VNC screen is a dark blue bar with various buttons known as the  
bribar. Its purpose is to show a number of critical status values and to provide shortcuts  
to commonly used features. Here is a snapshot of what it may look like. There will be  
slight differences based on optional features and system configuration. Starting from the  
left side of the Bribar, each feature and its function is outlined below.  
Bandwidth: Indicates current average bandwidth coming out of the Server Remote  
Control unit. The second number measures round trip time (RTT) of the connection when  
it was first established.  
Resync: Re-aligns the remote and local mouse points so they are on top of each other.  
Redraw: Redraws the entire screen contents; occurs immediately.  
PS/2: Resets the PS/2 keyboard and mouse emulation. Useful to recover failed mouse  
and/or keyboard connections in PS/2 mode.  
USB: Resets the USB connection by simulating an unplug and replug. Forces operating  
system to recognize the USB keyboard, mouse and emulated disk drive.  
÷4, ÷8: Switches to thumbnail mode, at indicated size (i.e. 1/8th, 1/4)  
Ctrl-Alt-Del: Sends this key sequence to the host. Works immediately.  
Alt-F4: Sends the key sequence to host (closes windows).  
KVM: Sends the KVM “hotkey” sequence. This function is only enabled when you have  
configured the unit to expect a particular brand of KVM downstream. It sends the key  
sequence to launch the KVM's on-screen display (OSD) menu. This button is only  
present when a KVM model is selected in the Web interface.  
Menu: Shows the main menu.  
Video: Shows the video-tuning menu where the picture quality can be adjusted.  
Keys: Shows the VirtKeys menu, which allows you to simulate pressing special keys  
such as the Windows key or complex multi-key sequences.  
Disk: Shows the USB emulated disk menu.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
In/Ej: Insert or eject the emulated USB disk. Enabled only if the host recognizes the USB  
disk.  
R/W: Shows if the disk image is readable and/or writable. If the disk is readable, the R  
letter will be white. Whenever the host reads from the disk, the R letter will glow green for  
a few seconds. Whenever the host is writing to the disk, the W letter will glow for a few  
seconds.  
8M: The type of USB disk selected is indicated here. The letters Flpy indicate floppy  
disk and CD indicates emulated CD-ROM.  
PS/2: This area will show either PS/2 (as in this example) or USB to indicate if keyboard  
and mouse are being emulated via USB connection or PS/2 signals. If Autosync  
appears beneath this indicator, the mouse pointers on the local mouse and the VNC  
session will be synchronized automatically.  
[1][A][S]: These flags show the state of the keyboard lights, NumLock, ShiftLock and  
ScrollLock respectively.  
X: Click this button to close the Bribar and hide it. This can be very useful on a client  
machine that has a screen size the same as the remote machine. No vertical screen  
space is wasted with the Bribar. Use double-F7 to start the main menu, then click on  
the Bribar to restore the feature.  
Other items: If the server's screen is larger than 1024x768, additional buttons will be  
shown to the right of the above listed items. These are all keyboard shortcuts and are  
duplicated in the Keys menu.  
Main Menu  
To access the main menu, quickly press F7 twice quickly. You must press the key twice  
within one second. If you press it once or too slowly, then the F7 key(s) are sent to the  
host, just like any other key. This is the only way to get into the menu system, if the Bribar  
is disabled. Here is the main menu for a typical system:  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
The main menu window may be moved by clicking and dragging on the title bar. It can be  
closed by pressing Escape, or by clicking on the red X in the top right corner.  
Here is a guide outlining various fields from the Main Menu. Most of the functions  
operate immediately. Other functions require a response to a confirmation prompt first  
before performing the requested function.  
Identification: Fixed text label that is defined by the user in the Web interface. This  
does not affect the operation of the system and is intended to assist with  
administration.  
Status: Current status of the attached system and the status of the unit.  
B/W Min/Avg/Max/Auto: Bandwidth control. current operation will be indicated with  
white highlighting. If you choose Min/Avg/Max then you will override the default, Auto.  
As the automatic mode measures actual network performance, you may see the  
current mode switch from Min up to Avg or Max. The different modes indicate more  
time spent on compression versus more bandwidth. There is no visual difference  
between the modes, but there can be a noticeable difference in speed and  
smoothness.  
Mouse Resync: Resynchronizes the mouse pointer so that the local and remote  
mouse pointers are on top of each other.  
PS/2 Reset: Resets the PS/2 emulation going to the host and to the attached PS/2  
devices. This can be used if the mouse stops responding or the PS/2 keyboard isn't  
working.  
USB Replug: Simulates unplugging the USB connector and then plugging it back in. If  
the host is not recognizing USB input devices, this button may be used to restore  
functionality.  
Take Control: When multiple users are connected to the same system, use this button  
to take control away from another user. Only one user may control the keyboard and  
mouse at any time. All users see the same picture. Please note: It is important that  
multiple users not be connected to the same physical network.  
Thumbnails: Switch to smaller thumbnail size screen images (click anywhere on  
thumbnail to restore it). Each button corresponds to a different sized image, from half  
size to one-sixteenth.  
Logout: End the VNC login session and disconnect.  
Video Tuning: Sub-menu with video adjustments, to be used when automatic picture  
adjustment does not provide a good quality picture.  
VirtKeys: Virtual keyboard provides a menu with special keys that are often hard to  
generate but needed by the remote system. The most common key sequence is the  
[Ctrl] – [Alt] – [Del].  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Disk Ctrl: Emulated USB disk control submenu. Shows status of floppy/Ramdisk or  
CD-ROM and permits easy “insertion” or “eject”.  
KVM Menu: Generates the key sequence used to access the on-screen menu for an  
enterprise-class KVM switch. When these conventional KVM switches are combined  
with the SV1115IPEXT, this key makes accessing their built-in menu easier, especially  
from the Java client. This button will only be shown when an external KVM has been  
enabled via the web interface.  
Bribar: Closes or reopens the Bribar window along the bottom of the screen.  
VirtKeys Menu  
Clicking any button in the top half of the window simulates pressing and releasing the  
indicated key. In the bottom area of the screen, clicking will simulate the indicated Meta  
key being pressed. You may then click in the top part to send another key and release the  
Meta key at the same time. Alternatively, you may move the mouse outside this window,  
press the regular key, and then choose -RESET- to release all depressed keys.  
The VirtKeys menu can be left open while using the host system. You can then click the  
required button at the suitable time, and still interact with the host in a normal fashion.  
Examples:  
[Ctrl]-[Alt]-[F4]: Use L-Ctrl then L-Alt in the Toggles area. Then click F4.  
To bring up the Start menu under Windows: Click the L-Windows button at the top left  
of the above window.  
Video Tuning Menu  
Use the Auto Everything button to automatically fine-tune all three adjustments. If the  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
test pattern for Color Offset calibration is not present on the screen, then the Color Offset  
adjustment is skipped.  
Changes/frame indicates the number of 16x16 blocks of video that are being sent, on  
average, for every frame of video. With a static image being displayed by the server, this  
number will be zero (shown as -nil-). Moving the mouse, for example, will cause the  
number to jump to about 2 or 3. You may use this number to judge the picture quality as  
you adjust the controls on this menu.  
Picture Positioning affects the image position on your screen. If you see a black line on  
either side of your screen, or at the top or bottom, you can use the arrow buttons to shift  
the image in that direction. Pressing Auto does the same thing for you automatically. Use  
Save to save the changes you have made manually. Since this adjustment depends on  
the video mode, separate values are stored for each video mode.  
Color Offset is a fine tuning adjustment that requires the use of a test pattern. There is  
a copy of the test pattern available on the Help! menu of the integrated web server. You  
must arrange for that image to be shown on the host computer. Do not allow scaling,  
cropping or any other changes to that image. Press the Auto button and the system will  
calibrate color for the best possible picture in approximately one minute. If the system  
cannot find the test pattern on the screen, it will say so. Check that the pattern isn't  
scaled or covered up. It's important to perform this operation in 24-bit or 32-bit color  
video mode (i.e. truecolor). Although the algorithm may work in 16-bit or 8-bit color video  
modes, the results will not be optimum and usually it won't be able to recognize the test  
pattern.  
Pressing the Advanced button will open the Advanced Video Tuning menu. While the  
vast majority of users will not need to adjust these settings, it offers added control of the  
video settings of your VNC sessions.  
Sampling Phase does not normally need to be used since SV1115IPEXT tunes the  
sampling phase whenever the video mode changes. This button does not require a test  
pattern, but will perform optimally when used with our standard test pattern. For your  
reference, the sampling phase number is shown to the right of the Filtering button.  
Noise Filter controls the advanced video filtering of our system. Unlike other filtering  
algorithms, our noise filter will only remove noise. It does not degrade the signal quality  
or readability of small text. You may turn it on and off using the indicated button, or set it  
to other values using the arrows. Higher numbers cause more filtering and may cause  
artifacts when moving windows. The most common visual artifact is a vertical line  
dropping when moving windows horizontally. You may use the Redraw button to correct  
these, or use a lower filter number. At minimum, these values must be greater than two.  
Getting Peak Performance  
Choose the best video mode  
• We recommend using 60Hz refresh rate and 1024x768 resolution. Using a smaller  
resolution like this allows you to fit multiple windows on your remote desktop. Higher  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
refresh rates stress the video card's quality and do not provide any additional  
information or benefit.  
Noisy video cards  
• A digital KVM works by converting the analog video signals emitted by your video card  
into digital data. If there is noise on that signal, then it must also be digitized and sent  
over the network. Quality video cards, in our experience, offer better performance  
simply because they don't add analog noise.  
• Some external KVM switches generate video noise as well. Try to keep cables short, in  
order to reduce this effect.  
• Enable the Noise Filter option (on the Video Tuning menu) to mitigate noise issues.  
Network performance  
• The SV1115IPEXT will always send as much data as it can, given what's happening on  
the screen and the actual network performance. When nothing is changing on the  
video screen, zero bytes are sent over the network. If the whole screen is changing,  
then the unit will send as much data as your network connection and VNC client allow.  
• Network latency, which is the total time it takes for a packet to get to the SV1115IPEXT  
and come back, has the biggest impact on perceived performance and usability.  
Network bandwidth has a lesser effect, particularly when just moving the mouse  
around. Only a few bytes need to be sent when the mouse is moving (and nothing else  
is changing on the screen), but the round-trip-time limits the hand-eye coordination of  
the user if it is too great. Both actual bandwidth and measured network latency are  
shown in the Main Menu.  
Using the Advanced Video Tuning Feature  
The Advanced Video Tuning menu allows you to adjust the qualities of the video in your  
VNC sessions, and can be accessed by clicking the Advanced button on the Video  
Tuning VNC menu. While many users will probably allow the SV1115IPEXT to  
automatically configure the video properties, you can use this menu to exercise a great  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
deal of control over the settings if you wish.  
The Presets section contains up to sixteen different settings, plus the factory setting. If a  
number is highlighted, then that preset has been programmed with valid settings and  
may be used. Note that the Factory preset is always available. Simply click on the  
appropriate button and those settings will be restored.  
To save settings to a preset, click on the Save->Preset button in the Actions pane. The  
preset buttons will highlight. Click the desired preset button to save the values. Note that  
any previous settings assigned to that button will be lost. If you do not wish to save the  
presets after clicking the Save->Preset button, click the Save->Preset button a second  
time and the save function will be cancelled.  
The section of the screen marked Current Values indicates the various video  
parameters that can be adjusted. For each parameter, there are a series of buttons: [, <<,  
-, Auto, +, >, ]. The ’[’ and ’]’ buttons set the parameter to its smallest or largest values,  
respectively. The ’<<’ and ’>>’ buttons decrease or increase the parameter by a large  
amount. In the case of phase, this is 4 units. For all the others, this is 10 units. The ’-’ and  
’+’ buttons decrease or increase the parameter by one unit. The middle button sets the  
parameter to the middle value. The text of the middle button also indicates which  
parameter is being controlled. Note that in the case of phase, the middle button invokes  
the auto-phase algorithm.  
The Performance section of the screen gives an indication of the quality of the video.  
Changes/frame is the average number of tiles that change for each frame sampled by  
the hardware. Flatness is an indication of what percentage of the screen contains tiles  
that are comprised of only one color.  
The Regrab Screen button in the Actions section causes the screen to be re-captured.  
When making small changes to the video parameters, sometimes these changes are not  
reflected in the displayed screen immediately, particularly if the noise filter is enabled.  
Press this button to see the immediate effect of the changes.  
Use the Show Diffs button to learn which parts of the screen are being sent over the  
Internet. When you click this button, the screen is cleared to a medium grey color. All  
blocks that are sent from that point on will show up on the screen as they are sent. Click  
the button again to reset the screen to grey. To return to normal operation, click the  
Regrab button. It is very easy to visually identify the effect noise has on signal  
processing, using this feature.  
The Auto Offset & Gain button in the Actions section invokes the automatic algorithm  
for setting the video parameters. The algorithm requires the factory calibration test  
pattern to be correctly displayed on the screen.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Disk Control Menu  
Aside from status information, there are only three buttons in this window. Insert and  
Eject will simulate that action, and only one option is enabled at any time, based on the  
current state of the emulated disk. USB Replug can be used to force the host to  
recognize the disk. It is not needed unless the host OS or hardware does not recognize it  
automatically.  
Using the IPMI Feature  
Background  
To offer a more complete remote server control solution, the SV1115IPEXT offers a  
power management feature that allows remote hardware restarts and the ability to power  
the host computer on and off. You may be able to take advantage of this feature if the  
host computer you are managing supports IPMI (Intelligent Platform Management  
Interface).  
Host Computer Requirements  
The host computer must support the IPMI standard version 1.5 to use this option. Most  
popular server motherboards now support the IPMI standard. To determine if your  
computer supports this IPMI, consult its documentation for more information.  
IPMI is used to configure and control a device on the motherboard called the BMC  
(Baseboard Management Controller) using a dedicated serial port. Once the computer is  
configured for IPMI management, the serial port on the host computer is normally  
reserved by the BIOS solely for that purpose and cannot be accessed or recognized by  
the operating system. It is therefore unlikely that a serial port provided by an add-in card  
will be able to act as an IPMI port, so you must use a serial port integrated on the  
motherboard of the host computer. If the computer you are managing only has a single  
serial port, you must add an additional port (or ports) via an add-in card if you need a  
serial port for other purposes (i.e. modem). Enabling IPMI support usually requires  
enabling options in the host computer’s BIOS setup software, and the instructions will  
vary considerably from make to make and model to model. Normally, a password will be  
created by the BIOS that allows the IPMI feature to be accessed; this password is  
exclusive to the IPMI feature and does not correspond to a password or account in the  
host computer’s operating system.  
If the Host Computer Does Not Support IPMI  
If the host computer you are managing with the SV1115IPEXT does not support IPMI,  
StarTech.com offers a non-IPMI solution that also works via serial port and acts as a  
power concentrator and a power management device: the 8 Outlet Serial Remote Power  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
contact your local StarTech.com dealer.  
Connecting the SV1115IPEXT for IPMI Control  
You can use either serial port on the SV1115IPEXT to send IPMI access; your choice will  
determine the type of cable you will use to make the connection. The DTE Serial port on  
the front panel requires the use of a null modem serial cable. The DCE Serial port on  
the rear panel requires the use of a straight through serial cable.  
Connect a female end of a serial cable to the serial port that is configured for IPMI  
access on the host computer. Connect the opposite end (male if connecting to the DCE  
Serial port, female if connecting to the DTE Serial port) to the SV1115IPEXT.  
DTE Serial (Front Panel)  
DCE Serial (Rear Panel)  
Configuring IPMI on the SV1115IPEXT  
Once you have connected the IPMI-configured serial port to the SV1115IPEXT and  
enabled the software option, you can begin to configure IPMI settings through the Web  
interface. Log in to the Web interface as admin. Click the Admin/Setup link at the top of  
the page and choose IPMI/IPMB setup (Intelligent Platform Management).  
You will be presented with the IPMI Status menu. Make the following changes to enable  
IPMI:  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
• Enable IPMI (Intelligent Platform Management Interface via serial port: select Enabled.  
• Select which serial port to use: select either Front serial port (DTE pin out) or Rear  
serial port (DCE pin out) based on how the SV1115IPEXT is connected to the IPMI  
serial port on the host computer.  
• Select baud rate to use: select a value from the menu between 9600 bps and 115,200  
bps based on the configuration on the host computer’s IPMI settings.  
• BMC Password: Enter the password twice assigned to the BMC in the host computer’s  
BIOS setup software.  
Note that the selected baud rate should match the host computer’s setting. Problems  
with the BMC password (as well as any other error information) will be recorded in the  
SV1115IPEXT’s system log on the Status page of the Web interface. If the host  
computer’s BIOS setup allows for multiple levels of security for the BMC, ensure the  
password you enter on the menu offers sufficient authority to control chassis power and  
monitor fan status.  
Once you have made the necessary changes on this screen, click Commit to activate  
IPMI with the settings you entered. Note that clicking Commit will cause any active VNC  
sessions to fail and you will need to re-establish them.  
Accessing the Status Screen  
The SV1115IPEXT allows you to monitor the status of the host computer via IPMI using  
either the Web interface or the VNC client. The information you will be able to view using  
the status screen will depend on the model of host computer being managed. Since  
IPMI implementations vary widely across manufacturers, the information you are able to  
see on your status screen may differ from the examples. Note that the Status screen will  
not allow you to make any configuration changes and is for monitoring purposes only.  
To access the Status (IPMI Sensor Report) screen (shown above):  
From the Web interface: Click View IPMI sensor report next to the thumbnail image on  
the Home screen  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
From the VNC interface: Click IPMI from the Bribar at the bottom of the VNC window  
Accessing IPMI Controls  
There are two ways to access power controls for the managed computer. The first is  
through the Home screen on the Web interface. The second is through the Bribar during  
an active VNC session.  
Once IPMI is enabled and functioning correctly, a set of controls will appear immediately  
under the thumbnail image of the host computer on the Home screen on the Web  
interface. Note that you must be logged in as admin to use this feature.  
From the Home screen:  
Hard Reset: Equivalent to pressing the RESET button on the managed computer. (The  
computer will restart.)  
Power Cycle: The computer will power off, pause for a moment, and power on again  
automatically; equivalent to pressing the POWER button off and on again  
on the host computer.  
Turn ON: Powers on the host computer.  
Turn OFF: Powers off the host computer.  
Pulse Diag Int: Restarts operating system on host computer.  
Graceful off: Powers down operating system on host computer.  
From the VNC:  
If you are inside an active VNC session and are logged in as admin you can use the  
Bribar to access IPMI features. You have two choices from the Bribar:  
Reset: Equivalent to pressing the RESET button on the managed computer. (The  
computer will restart.)  
ON/OFF: Powers the host computer on or off depending on the current state of the host  
computer; equivalent to pressing the POWER button on the host computer.  
NOTE: IPMI may not automatically close the host computer software safely when you  
issue a reset or power off command. Since these features are equivalent to pressing  
hardware buttons on the computer itself, the computer will respond in exactly the same  
way. Always shut down your operating system and application software normally before  
issuing an IPMI command to avoid data loss or corruption.  
Using the Modem Feature  
Background  
The modem feature allows the SV1115IPEXT to act as an Internet connection server for  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
increased security and flexibility in connecting with the host computer. Unlike the TCP/IP  
connection used with the standard Web configuration and VNC clients, the modem  
creates a one-to-one connection between the SV1115IPEXT and the computer you are  
using to manage the host computer that is essentially private, as it bypasses the public  
Internet completely. Note: this feature requires both an external modem (most standard  
connection protocols are supported) and a dedicated phone line that can be connected  
to the modem for external access. While it is possible to use the modem feature through  
some PBX systems, this increases the complexity and reduces the performance of the  
connection. For clarity, the instructions presented here assume that the modem is  
connected to a typical POTS (plain old telephone system) line that is not routed through  
a phone management system or shared with other devices. If you wish to use this  
feature through a PBX system, it may require some experimentation and additional  
support from your telecom services provider, and is not supported by StarTech.com.  
Connecting a Modem  
The SV1115IPEXT will work with virtually any Hayes-compatible modem that recognizes  
the standard AT command set. Some modem manufacturers offer “enterprise” grade  
modem products (at a premium price) that include technology to improve the stability of  
connections; whether this type of product would be beneficial to your application depends  
on whether you consider the modem connection to be mission-critical, the quality of your  
telecom infrastructure, and your budget for implementing this solution. The model of  
modem attached is essentially transparent to the SV1115IPEXT.  
It is important to note that modems that offer “56K” (or 56,000 bps) connections often  
achieve connection speeds that are far lower than their maximum capabilities. Given the  
limitations of telecom infrastructure (many locations have yet to implement fully digital  
switching technology, and still rely on older analog technology for some segments), the  
maximum “upstream” transfer rate is limited to a maximum of 33,600 bps between two  
modems; the “downstream” rate is often within a similar range for a typical connection.  
Therefore, speeds below 56,000 bps do not indicate a problem with the modem or the  
SV1115IPEXT, but simply reflect the line conditions at the time the connection is made.  
The DTE Serial port on the front panel can be used for serial port configuration when the  
modem is connected. It requires the use of a null modem serial cable.  
The DCE Serial port on the rear panel is used to connect the modem to the  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
SV1115IPEXT and requires the use of a straight through serial cable.  
Rear Panel (DCE Serial port)  
Front Panel (DTE Serial port)  
Place the modem near the SV1115IPEXT and an available telephone jack. Connect the  
modem to the telephone jack, data cable, and power source according to the instructions  
in its documentation. The opposite end of the modem’s data cable should be a DB9  
female serial connection. Connect that end of the cable to the DCE Serial connection on  
the rear panel of the SV1115IPEXT.  
Modem configuration  
Although most connections will work appropriately with the default settings on  
SV1115IPEXT, manual changes can be made. To do so:  
Login to the Web interface as Admin. Click Modem, listed on the left side of the main  
page. You will then be presented with the Modem Option menu (see above). Make the  
following changes to enable and configure the modem connection.  
Enable modem connections (PPP) via serial port/modem: select Enabled.  
Baud rate to use (affects connection between us and the modem only): select  
115200.  
Init string: leave as ATE0S0=1&K3 (see below).  
The baud rate dictates the connection speed between the SV1115IPEXT’s serial port  
and the modem, and does not affect the connection speed between the local and remote  
modems, as they will negotiate their own connection speed when a connection is made.  
It is highly recommended that this setting be left at the default for best performance.  
The initialization (“init”) string is the command (using the standardized Hayes AT  
command set) that the SV1115IPEXT will send to the modem to activate it. The string  
included should work with the majority of modems and configures the following  
connection properties: answer incoming calls on the first ring, enable hardware flow  
control, and lock the connection speed. Your modem’s documentation will describe other  
potential init strings that you can use to alter the connection properties. For instance,  
you could commit the settings to the modem’s non-volatile memory (NVRAM) or allow  
the modem to adjust the connection speed for greater stability (and so on). You may  
wish to test the connection with the default init string first, before making changes  
specific to your modem model or situation, to simplify the troubleshooting process.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Click the Commit button to save your changes and activate the modem feature with the  
specified settings.  
Configuring the Remote Connection  
This section describes how to configure a typical Windows dial-up session to access the  
modem connection on the SV1115IPEXT. The instructions here relate to a Windows XP  
configuration; other versions of Windows are similar.  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Open My Network Places from the desktop or the Start menu.  
Click View network connections.  
Click Create a new connection under Network Tasks.  
The New Connection Wizard window will open. Click Next.  
Select Connect to the Internet and click Next.  
Select Set up my connection manually and click Next.  
Select Connect using a dial-up modem and click Next.  
In the space provided under ISP Name, type an appropriate name of your  
choosing for the connection. Click Next.  
9.  
In the space provided under Phone Number enter the phone number for the  
line to which the SV1115IPEXT’s modem is connected. You may need to add  
the area code, country code, or other digits needed to access the outside line  
as appropriate. When finished, click Next.  
10.  
11.  
Make your choice from Anyone’s use or My use only and click Next.  
Beside User name enter the user name of any valid user created using the  
Web interface of the SV1115IPEXT. Beside Password and Confirm password  
enter the password that the user you entered above uses to access the Web  
interface.  
12.  
13.  
14.  
This screen also includes 3 checkboxes. Uncheck all 3 checkboxes.  
Click Next.  
You may select to add a shortcut to the desktop for this connection. Click  
Finish.  
PPP (Point-to-Point Protocol) must be used; no other authentication methods  
are supported.  
TCP/IP must be installed/enabled on the computer making the connection, and  
must be used for the dial-up connection.  
The connection must be configured to obtain a dynamic IP address.  
The user name/password must match a user currently configured on the  
SV1115IPEXT.  
For best performance and to simplify the troubleshooting process, firewall  
software should not be used with the dial-up connection.  
Accessing the Web Interface  
Once a dial-up connection has been established, you can access the Web interface or  
start a VNC session using the following IP address:  
You can now login to the Web interface (and/or VNC session) normally. Note that the  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
remote machine (the one you dialed from) is automatically assigned the IP address  
99.99.99.100 for the PPP session. This, and the IP address of the SV1115IPEXT, cannot  
be modified. The following TCP/IP port numbers are assigned for a PPP connection,  
regardless of the settings configured in the Web interface for the LAN or WAN ports:  
HTTPS: 443  
VNC (clear-text): 5900  
VNC (SSL secured): 15900  
SSH: 22  
Performance Notes  
• All images over the PPP connection will be grayscale to conserve bandwidth. If other  
users are connected while a PPP session is active, their screens will be in grayscale  
as well. When PPP in inactive, color is automatically re-enabled.  
• Some areas of the screen may not be updated as frequently as others, and animations  
or other auto-updating areas of the screen may appear out-of-focus or “blocky” as a  
result. Since the area around the mouse pointer is refreshed most frequently, hold the  
pointer over an area to improve its clarity.  
• It may be beneficial to minimize any unnecessary icons, backgrounds, or other clutter  
on the host computer’s desktop to make the dial-up connection as efficient as possible.  
• When the modem feature is enabled, you can use a “line modem” connection on the  
serial port using a serial cable to begin a PPP session. If you are using the DTE Serial  
port on the front panel, use a null modem serial cable. If you have disconnected the  
modem and are using the DCE Serial port on the rear panel for the PPP connection,  
use a straight through serial cable. When the modem is not actively connected, you  
can begin a PPP session at up to 460 kbps. To hang up and re-connect the modem,  
end the PPP session.  
• If you need to configure the device over a serial connection while the modem option is  
enabled, connect a serial cable (see immediately above for instructions on what type of  
cable to use for the port you are accessing on the SV1115IPEXT) and begin a terminal  
session following the instructions under Terminal Configuration Using a Serial Cable  
in this manual. Once connected, you will see the following message:  
Expecting a modem, if human, type admin password (Or start PPP)  
Type the password for user admin and press Enter. The password will not appear on  
the screen. The configuration menu will appear. Make the changes you wish or press q  
and Enter to exit and leave the modem connection active.  
Troubleshooting Guide  
The following messages will appear in the system log on the Status screen in the Web  
interface and may help to diagnose problems with the modem configuration.  
Starting PPP (for auth) on port…  
Modem is connecting and the PPP login process is starting.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Modem hang up. Resetting  
The connection has been closed or terminated unexpectedly.  
Timeout during login process. Giving up  
The PPP client connecting over the modem has waited too long to complete the  
authentication process or supplied an invalid user name and/or password.  
Modem init chat script failed  
The modem did not respond to the initialization string from the SV1115IPEXT. You may  
need to change the init string or verify the cabling and modem status.  
Modem init okay  
The modem has responded appropriately to the init string.  
Saw PPP startup from client  
A PPP authentication has occurred and a session has started.  
Phone line rings  
An incoming call has been detected by the modem.  
Modem answers: xxxxxxxxx  
The connection speed and protocol used for a connection, as reported by the modem.  
The exact contents of the message will vary depending on the modem make and model.  
Using Optional Serial Remote Control (R-Port) Modules  
Serial Remote Control operation  
Background  
The SV1115IPEXT offers a unique way to expand the functionality of the base product.  
Using the integrated R-Port on the rear panel, you can manage up to 8 serial devices  
using a specialized daisy-chain technology. The SV1115IPEXT includes integrated  
control functionality that allows you to monitor and configure serial devices using the  
interactive Web interface. To minimize space and infrastructure requirements, the R-Port  
modules use a single cable to carry both power and the data signal. All configuration  
settings are stored separately in each attached device in non-volatile memory so that  
they will not be lost in the event of a power outage or disconnection.  
Connecting Serial Remote Control Modules to the SV1115IPEXT  
The cable for each serial device is similar to a phone cable and uses an RJ-14  
connector. For the first module, connect the cable (provided) to the R-Port on the rear  
panel of the SV1115IPEXT. Connect the opposite end to the DATA OUT (or similar) port  
on the Serial Remote Control unit. Note that some devices may use an integrated cable,  
so you will not need to make a separate connection on the serial device. Once you have  
added the first serial device to the SV1115IPEXT, you can connect additional modules to  
the DATA IN (or similar) port on the previous module in the chain. Once the cabling is  
attached, the module becomes active after a 15 second initialization period. For specific  
information regarding cabling and status indicators for a specific serial console, refer to  
the instructions that came with the product.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Configuring/Viewing Serial Remote Control Modules through the Web Interface  
Once you have one or more R-Port serial devices connected, you will able to configure  
and manage them through the Web interface. You may need to modify the default  
settings on SV1115IPEXT to match your various R-Port modules’ default configuration.  
Consult the documentation that came with your R-Port module to determine if you need  
to modify the default settings to complete the installation. To be able to configure your R-  
Port modules, you must be logged in as admin. Other users will be able to view which  
modules are active but cannot configure them.  
Once you are logged in, choose the Admin/Setup option from the menu at the top of the  
Home screen in the Web interface. Click External Serial consoles setup and control.  
You will be presented with the Serial Consoles Attached menu, and a table with the  
following headings:  
#:You can assign a value (1 ~ 99) to each attached serial remote control module. This  
does not affect the configuration or operation of the device in any way, but is simply a  
means to sort this list for ease of management.  
Name/Description: An identifier for the R-Port module. Like the number assignment, it  
is for ease of administration only.  
Baud (bps): This is the communication speed for the device, and the setting here must  
match the setting on the module itself. All common baud rates between 300 and 115,200  
bps are supported.  
Mode: Sets the character framing scheme that the SV1115IPEXT will use with the R-  
Port module. You can choose from the following selections:  
8N1: Eight bits, no parity, one stop bit (default and most common)  
7N1/701/7E1/7M1/7S1: Seven bits, (none/odd/even/mark/space) parity, one stop bit  
8N1/801/8E1/8M1/8S1: Eight bits, (none/odd/even/mark/space) parity, one stop bit  
8N2: Eight bits, no parity, two stop bits  
Force DCD: Forces the Carrier Detect signal to be active at all times. Normally, DCD  
becomes active when a new user connects and is dropped when the last user  
disconnects (a response that is similar to many modems). When active, the device will  
logout and reset itself if the carrier signal is lost, increasing security. Note that this may  
not work with all devices and could impair proper operation in some circumstances. The  
default setting is off.  
Console Log: Clicking this link will open a separate Web page that will display the last  
200 characters committed to that device’s console log. Note that existing data is  
overwritten automatically when the 200 character limit is reached.  
IPMI: Shows the IPMI command interface for the device, if applicable.  
You can make as many changes as needed on this menu at one time, before applying  
your changes. Once you are satisfied with the changes you have made, click Commit  
changes to apply the new settings. Click Refresh at any time to see an updated list of  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
attached R-Port modules.  
Advanced Configuration Using the Integrated SSH Shell  
In most cases, configuring the SV1115IPEXT to the same settings as the R-Port devices  
you are connecting should allow the devices to work with a minimum amount of  
configuration. However, you can also change the default settings on each R-Port device  
to fit your preferences and the needs of your application.  
If you click the Connect… button next to the device you want to configure, two new  
windows will appear. The smaller of the two is a login screen; the other is a SSH  
terminal window. Click the login window and sign in as admin (using the same  
password as the Web interface) to activate the terminal window. You will see a welcome  
banner similar to the following:  
Baud rate: 115200 bps, 8N1  
Connected to #1: (none)... (Press Ctrl-Shift-_ for menu).  
You are now connected to the R-Port module in a live terminal session. Commands you  
type will be echoed on the terminal screen. The module also offers a simple menu  
system that allows you to change its configuration settings (similar to the function of the  
menus in a terminal software package). Press [Ctrl] - [Shift] [_] (underscore) on the  
keyboard to access the menu. It will be similar to the following:  
RS-232 Menu (#1: (none), 115200 bps, 8N1)  
Q – Disconnect  
# - Send break  
H – Hangup line (drop DCD)  
E – Send Ctrl-Shift-_  
L – Low log entries (line buffer)  
1 – Show last 10 log entries  
other – Return to connection  
Press key ->  
To execute the desired command, simply press the corresponding key on the keyboard.  
You can also execute the command and avoid the menu by pressing the [Ctrl] – [Shift] –  
[_] key combination quickly and pressing the letter of the command. To quit the menu,  
press [Q] on the keyboard when the menu is active. These commands are not sent to  
the device you are managing and relate to the RPORT module itself.  
Remote Login via SSH  
You can also use a standard SSH client to access the R-Port options if you wish to avoid  
using the Java-based SSH client in the Web interface. Simply use your SSH client  
(several freeware packages are available for download, along with commercial  
applications) and connect to the IP address of the SV1115IPEXT using port 22 (default).  
Log in to the SSH session as admin using the same password as the Web interface. At  
the command prompt type connect x (where x is the number of the R-Port devices you  
wish to manage). Alternatively, you can enter the command connect -l to see a list of  
active devices.  
Operating Notes  
• If the power supply to the R-Port modules you have connected becomes faulty (short,  
overload) then the R-Port LED on the front panel of the SV1115IPEXT will show red.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Under normal operations, this light should remain green. The R-Port connector on the  
rear panel also has an LED that mirrors the status of the light on the front panel.  
(Note: The rear LED status was reversed on some early units, where red=normal and  
green=fault. This does not affect operation in any way, but a green LED on the front  
panel and a red LED on the rear panel indicates that you have one of these units.)  
• Hardware handshaking (CTS/RTS) is required for speeds exceeding 9600 bps. It is  
enabled by default on the SV1115IPEXT, but may need to be enabled on the other end  
of the connection. For Unix systems, the command is:  
stty –crtscts < /dev/[serial port]  
• A maximum of four users may simultaneously login to the same module. All users may  
type commands at any time, and all users will see the same output. Note the following:  
All users have equal access to all channels.  
A maximum of 16 R-Port modules may be connected at any one time.  
You plug-in and unplug any R-Port module at any time. When reconnected, it  
will automatically become available after a 15 second initialization period. Any  
log entries will be retained by the R-Port module while deactivated, but will not  
be available to users until it is re-initialized.  
About Security Certificate Warnings  
What is a security certificate?  
Sites that employ secure TCP/IP (Internet) connections include a certificate that confirms  
that users are connecting to a legitimate site and are not being redirected without their  
knowledge. Certificates are issued by trusted third parties called Certificate Authorities  
(CAs) and contain essential details about a site that must match the information supplied  
to your Web browser.  
Why do I receive a warning when I access the login screen on the SV1115IPEXT?  
As it redirects you to a secure (SSL) session by default, the login screen may generate a  
warning from your Web browser or the VNC Java client for two different reasons. First,  
the CA that has issued the certificate on StarTech.com’s behalf may not yet be  
recognized as a trusted source by the computer you are using to access the  
SV1115IPEXT. Second, since the unit could be configured in a number different ways, it  
is impossible to supply a generic certificate that will match your exact network settings.  
Is my data safe?  
Yes. The security certificate does not affect encryption effectiveness in any way, nor  
does it make the SV1115IPEXT any more vulnerable to outside attacks.  
Can I prevent the warning from occurring?  
Yes. You have two options that may prevent the warning from occurring. First, if the Web  
browser you are using offers the option to ignore the warning for future visits, the browser  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
will no longer generate a warning if that option is selected. Second, if you install the  
certificate from the SV1115IPEXT onto the host computer (see below) and if the unit is  
configured with a domain name ending in .com, .net, .org, .gov, .edu, .us, .ca, .uk, .jp, or  
.tw (i.e. remotecontrol.mydomain.net) then the warning should no longer occur.  
Installing the new certificate…  
The following instructions detail how to install the certificate from the SV1115IPEXT onto  
your local computer (in this case, when using Internet Explorer with Windows XP).  
1. Open your Web browser and go to the SV1115IPEXT login screen. Click the Update  
security certificate link.  
2. When prompted, choose Open.  
3. A Window will appear that offers information about the certificate. Click Install  
Certificate.  
4. The Certificate Import Wizard will appear. Select Automatically select the  
certificate store… (default) and click Next. When the next window appears, click  
Finish.  
5. A confirmation dialog will appear asking you if you wish to install the certificate. Click  
Yes.  
6. A message should appear saying the import was successful. Click OK.  
Troubleshooting  
Forgotten master password.  
You can reset the master password using the serial interface on the unit. Use the S  
command, and type a new password. The old password is not required for this  
procedure.  
Remote mouse and local mouse don't line up.  
Use the Mouse resync command in the main menu or press the Resync button on the  
Bribar. If the mouse pointers still don't line up, verify that mouse acceleration has been  
disabled.  
NOTE: The Windows login screen does not accept the “mouse acceleration”  
configuration, and always has the mouse accelerated regardless of your configuration.  
Therefore, on this screen it is best to avoid using the mouse.  
After resync, the mouse pointers are still not aligned.  
Use the video adjust menu to position your video image exactly where it should be.  
Normally a slight video positioning error is perceived as a mouse sync issue. A video  
positioning error is visible as a black line along the top or bottom (and right or left) edges  
of the remote screen. Remember to save your position changes!  
Cannot login via SSH.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Remember to use either admin or a username created in the system as the user name  
you give your SSH client.  
If you see a warning about identity of host cannot be verified, and a question about  
saving the host's fingerprint, this is normal for the first time you connect to any machine  
running SSH. You should answer yes so that your SSH client saves the public key of this  
host and doesn't re-issue this warning.  
Certificate warning shown when connecting via HTTPS.  
It is normal for a warning dialog to be shown when connecting via HTTPS. The SSL  
certificate SV1115IPEXT uses is created when the unit is first produced. It does not  
contain the correct hostname (subject name) because you can change the hostname as  
required. Also, it is not signed by a recognized certificate authority (CA) but is signed by  
our own signing authority.  
Don't set LAN and WAN to the same IP Address.  
This type of installation will not work. If you want to use both ports in redundant mode,  
enable the Ethernet bridging option and plug both into the same network. The WAN IP  
address is not used in that configuration.  
Mouse performance is erratic when using the GNOME or KDE desktop in a Linux  
X-Window environment.  
The mouse controls in GNOME and KDE environments offer both an acceleration and  
sensitivity setting. The following directions correct this issue, and apply to Red Hat  
Fedora Core 2, but should be similar for other distributions that use GNOME or KDE:  
1.  
2.  
3.  
4.  
5.  
Click the Launch menu icon.  
Choose Preferences > Mouse.  
Click the Motion tab.  
Set the Acceleration bar to the setting immediately left of center.  
Set the Sensitivity bar to the leftmost settings (lowest possible)  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Specifications  
General Specifications  
Maximum supported video mode 1600 x 1200 @85Hz  
640x400 @ 85Hz  
720x400 @ 85Hz  
640x480 @ 60Hz, 72Hz, 75Hz, 85Hz  
800x600 @ 56Hz, 60Hz, 72Hz, 75Hz, 85Hz  
Standard video modes supported 1024x768 @ 60Hz, 70Hz, 75Hz, 85Hz  
1152x864 @ 75Hz  
1280x960 @ 60Hz, 85Hz  
1280x1024 @ 60Hz, 75Hz, 85Hz  
1600x1200 @ 60Hz, 65Hz, 70Hz, 75Hz,  
Maximum power consumption  
Input Connectors  
15 Watts (5VDC, 3A)  
Video In  
PS/2 Keyboard  
PS/2 Mouse  
USB ‘A’ x 3  
USB ‘B’ x 1  
LAN (RJ45)  
WAN (RJ45)  
R-Port (RJ11)  
DB9 RS-232 Female (Serial DCE)  
DB9 RS-232 Male (Serial DTE)  
DC IN (2, with redundancy)  
FCC Class A, CE, ROHS  
Regulatory certifications  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Instruction Manual  
Specifications - Cont’d  
Supported Protocols  
Service  
Description  
Benefit  
May be used to securely “tunnel” VNC and HTTP  
protocols.  
SSH  
Secure Shell  
Web redirector (to Convenience server to redirect all web traffic to  
HTTP  
HTTPS)  
encrypted port. Clear-text HTTP is not supported  
SNMP agent  
(UDP)  
Allows integration with existing SNMP network  
management systems.  
SNMP  
Secure control and management of the device  
and attached system. Screen snapshots may be  
SSLTLS  
HTTPS  
Encrypted web downloaded. Integrated Java VNC client (with or  
control  
without encryption) allows control from any Java-  
enabled browser. Password protected.  
VNC/RFB  
Protocol Server  
Standardized real-time KVM network protocol.  
Compatible with existing VNC client software.  
VNC protocol tunneled via SSLTLS encryption.  
For secure real-time control of the server over  
public networks.  
VNC  
SSL-tunneled  
VNC  
VNCS  
DHCP Dynamic IP  
Setup Config  
Eases network setup by fetching IP address and  
other network settings from a centralized server.  
Allows integration with existing RADIUS servers,  
so that user management can be centralized.  
Supports challenge response  
RADIUS  
Centralized  
authentication  
authentication using hardware tokens (like  
SecurID) and conventional passwords.  
System event  
logging to another  
system  
MIT-LCS UDP protocol. Must be configured via  
DHCP option.  
SYSLOG  
DNS  
Converts text name into IP Address Only used in  
the URL specification needed to emulate a CD-  
ROM. Use is optional.  
Domain Name  
Service  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About StarTech.com  
StarTech.com is “The Professionals’ Source for Hard-to-Find Computer  
Parts”. Since 1985, we have been providing IT professionals with the  
quality products they need to complete their solutions. We offer an  
unmatched selection of computer parts, cables, server management  
solutions and A/V products and serve a worldwide market through our  
locations in the United States, Canada, the United Kingdom and Taiwan.  
Visit www.startech.com for complete information about all our products  
and to access exclusive interactive tools such as the Parts Finder and the  
KVM Reference Guide. StarTech.com makes it easy to complete almost  
any IT solution. Find out for yourself why our products lead the industry in  
performance, support, and value.  
Revised: 18 May 2007 (Rev. A)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Stereo System XL MP131 User Manual
Sony Computer Monitor CPD 100ES CPD 100EST CPD 200ES CPD 200EST User Manual
Sony Ericsson Personal Computer VGN AR600 User Manual
Sony Flat Panel Television 32CX52X User Manual
Sony Portable CD Player NW S202 User Manual
Speed Queen Washer 801529 User Manual
Stiga Trimmer ST 1200 BAT User Manual
Stow Chainsaw CC813H20 User Manual
Strong Enterprises Work Light 48057 User Manual
Sunbeam Blood Pressure Monitor 7656 10 User Manual