QUANTUM Series GX3500S
25 Watt VHF/FM
ITU Class D DSC Marine Transceiver
Owner's Manual
ꢀ Oversized alphanumeric LCD, knobs and keys
ꢀ 30 W Loud Hailer with listen back and 4 fog horns, Bells & Whistles
ꢀ Direct keypad entry of a channel using the keypad
ꢀ Removable ClearVoice speaker microphone with 16/9 key and channel
selection
ꢀ Display shows channel names, and repeats GPS information8
ꢀ Capable of connecting 2 optional enhanced RAM+ second station re-
mote microphones
ꢀ DSC distress call automatically broadcasts lat/long and vessel ID8
ꢀ DSC position request function and NMEA data input/output to connect to
GPS Plotter8
ꢀ Versatile user-programmable Scanning, Priority Scan and Dual Watch
ꢀ One-button access to Channel 16 and 9
8 with GPS attached
Download from Www.Somanuals.com. All Manuals Search And Download.
TABLE OF CONTENTS
11.3 DSC DISTRESS CALL ................................................................................. 38
11.3.1 Tansmitting a DSC Distress Call ........................................................ 38
11.3.2 Receiving a DSC Distress Call.......................................................... 40
11.4 ALL SHIPS CALL ......................................................................................... 40
11.4.1 Transmitting an All Ships Call ............................................................ 41
11.4.2 Receiving an All Ships Call ............................................................... 41
11.5 INDIVIDUAL CALL ........................................................................................ 42
11.5.1 Setting up the Individual / Position Call Directory ............................. 42
11.5.2 Setting up Individual Ringer ............................................................... 43
11.5.3 Setting up Individual / Group Call Ringer .......................................... 44
11.5.4 Transmitting an Individual Call ........................................................... 45
11.5.5 Receiving an Individual Call ............................................................... 47
11.5.6 Setting up the Call Waiting Function ................................................ 47
11.6 GROUP CALL ............................................................................................... 48
11.6.1 Setting up a Group Call ..................................................................... 48
11.6.2 Transmitting a Group Call .................................................................. 49
11.6.3 Receiving a Group Call ...................................................................... 51
11.7 POSITION REQUEST................................................................................... 52
11.7.1 Setting up Position Reply ................................................................... 52
11.7.2 Transmitting a Position Request to Another Vessel......................... 53
11.7.3 Receiving a Position Request ............................................................ 55
11.8 POSITION SEND .......................................................................................... 56
11.8.1 Setting up Position Send Ringer ....................................................... 56
11.8.2 Transmitting a DSC Position Send Call............................................ 57
11.8.3 Receiving a DSC Position Send Call ............................................... 57
11.9 MANUAL INPUTTING OF THE GPS LOCATION (LAT/LON) ................... 59
12 RADIO SETUP MODE ........................................................................................... 60
12.1 LCD CONTRAST .......................................................................................... 60
12.2 TIME OFFSET .............................................................................................. 61
12.3 TIME LOCATION............................................................................................ 62
12.4 TRUE MAGNETIC CHANGE (NAV display)................................................. 62
12.5 PRIORITY CHANNEL SET .......................................................................... 63
12.6 SCAN TYPE .................................................................................................. 63
12.7 SCAN RESUME TIME ................................................................................. 64
12.8 KEY BEEP (ON/OFF) ................................................................................... 64
12.9 WX ALERT .................................................................................................... 65
12.10 CHANNEL NAME CHANGE ...................................................................... 66
12.11 NAMING THE RADIO OR RAM+ STATIONS ......................................... 67
12.12 FOG ALERT TONE FREQUENCY.............................................................. 68
13 ENHANCED RAM+ MIC OPERTION ..................................................................... 69
13.1 RAM+ MIC CONTROLS............................................................................... 69
13.2 INTERCOM OPERTION ............................................................................... 72
13.2.1 Communication ..................................................................................... 72
13.2.2 Calling ................................................................................................... 72
13.3 PA / FOG OPERATION ................................................................................. 73
13.3.1 Operating the PA / Hailer ....................................................................... 73
13.3.2 Operating the FOG / HORN................................................................... 73
13.3 DSC / RADIO SETUP MODE........................................................................ 74
14 MAINTENANCE ..................................................................................................... 75
14.1 REPLACEMENT PARTS .............................................................................. 75
14.2 FACTORY SERVICE .................................................................................... 75
14.3 TROUBLESHOOTING CHART .................................................................... 76
15 CHANNEL ASSIGNMENTS ................................................................................... 77
16 WARRANTY ........................................................................................................... 83
17 SPECIFICATIONS.................................................................................................. 86
18 APPENDIX ............................................................................................................. 87
GX3500S
Page 3
Download from Www.Somanuals.com. All Manuals Search And Download.
1 GENERAL INFORMATION
The Vertex Standard GX3500S is a VHF/FM transceiver designed for use in
the frequency range of 156.025 to 163.275 MHz. The GX3500S can be oper-
ated from 11 to 16 VDC and has a switchable RF output power of 1 watt or 25
watts.
The GX3500S is capable of DSC (Digital Selective Calling) Class D operation
and an Enhanced second station RAM+ mic (CMP25 remote-control speaker/
microphone with display). Class D operation allows continous receiving of Digi-
tal Selective Calling functions on channel 70 even if the radio is receiving a call.
Other features of the GX3500S include: Direct keypad entry of a channel using
the keypad, 30W PA/Fog, multi-station intercom, scanning, priority scanning,
submersible speaker mic, high and low voltage warning, and GPS repeatability.
2 PACKING LIST
When the package containing the transceiver is first opened, please check it
for the following contents:
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
GX3500S Transceiver
Mounting Bracket and attaching hardware
Owner’s Manual
Quick-Reference Card
Power Cord
3 OPTIONS
MMB-84 .......................................................................... Flush-Mount Bracket
CMP25B/W ............... Remote-Access Microphone (RAM+ Mic, Black/White)
CT-100 ............................................... 10-foot Extension Cable for RAM+ Mic
CVS2500 ............................................................................... Voice Scrambler
101W....................................................................... White Extension Speaker
201SW .................................................................... White Extension Speaker
201SWZ ............................................. White Flush Mount Extension Speaker
201SB...................................................................... Black Extension Speaker
201SBK ............................................... Black Flush Mount Extension Speaker
220SW ..................................................................... 4.5” Round Hail/PA Horn
240SW ........................................................... 5 x 8 Rectangular Hail/PA Horn
Page 4
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
4 SAFETY / WARNING INFORMATION
This radio is restricted to occupational use, work related operations only where
the radio operator must have the knowledge to control the exposure conditions
of its passengers and bystanders by maintaining the minimum separation dis-
tance of 0.6 m (2 feet).
Failure to observe these restrictions will result in exceeding the FCC RF expo-
sure limits.
Antenna Installation:
The antenna must be located at least 0.6 m (2 feet) away from passengers in
order to comply with the FCC RF exposure requirements.
ON-LINE WARRANTY REGISTRATION
VHF. It should be noted that visiting the Web site from time to time may
be beneficial to you, as new products are released they will appear on
the Marine Division of Vertex Standard Web site.
PRODUCT SUPPORT INQUIRIES
If you have any questions or comments regarding the use of the GX3500S,
you can visit the Marine Division of Vertex Standard Web site to send an
E-Mail or contact the Product Support team at 800-767-2450 M-F 7:00-
5:00PST.
GX3500S
Page 5
Download from Www.Somanuals.com. All Manuals Search And Download.
5 FCC RADIO LICENSE INFORMATION
Vertex Standard radios comply with the Federal Communication Commission
(FCC) requirements that regulate the Maritime Radio Service.
STATION LICENSE
An FCC ship station license is no longer required for any vessel traveling in
U.S. waters (except Hawaii) which is under 20 meters in length. However, any
vessel required to carry a marine radio on an international voyage, carrying a
HF single side band radiotelephone or marine satellite terminal is required to
have a ship station license. FCC license forms, including applications for ship
(506) and land station licenses can be downloaded via the Internet at
RADIO CALL SIGN
Currently the FCC does not require recreational boaters to have a Ship Radio
Station License. The USCG recommends the boats registration number and
the state to be used.
CANADIAN SHIP STATION LICENSING
You may need a license when traveling in Canada. If you do need a license
contact their nearest field office or regional office or write:
Industry Canada
Radio Regulatory Branch
Attn: DOSP
300 Slater Street
Ottawa, Ontario
Canada, KIA 0C8
FCC / INDUSTRY CANADA INFORMATION
The following data pertaining to the transceiver is necessary to fill out the li-
cense application.
Type Acceptance ......................................................................... FCC Part 80
Output Power ............................................... 1 Watt (low) and 25 Watts (high)
Emission......................................................................... 16K0G3E, 16K0G2B
Frequency Range ..................................................... 156.025 to 163.275 MHz
FCC Type Number.................................................................... K6630063X30
Industry Canada Type Approval .............................................511B-30063X3D
Page 6
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
6 FCC NOTICE
NOTICE
Unauthorized changes or modifications to this equipment may void com-
pliance with FCC Rules. Any change or modification must be approved
in writing by Marine Division of Vertex Standard.
NOTICE
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful in-
terference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to ra-
dio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be deter-
mined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
GX3500S
Page 7
Download from Www.Somanuals.com. All Manuals Search And Download.
7 GETTING STARTED
7.1 ABOUT VHF RADIO
The radio frequencies used in the VHF marine band lie between 156 and 158
MHz with some shore stations available between 161 and 163 MHz. The ma-
rine VHF band provides communications over distances that are essentially
“line of sight” (VHF signals do not travel well through objects such as buildings,
hills or trees). Actual transmission range depends much more on antenna type,
gain and height than on the power output of the transmitter. On a fixed mount
25W radio transmission expected distances can be greater than 15 miles.
7.2 SELECTING AN ANTENNA
Marine antennas are made to radiate signals equally in all horizontal directions,
but not straight up. The objective of a marine antenna is to enhance the signal
toward the horizon. The degree to which this is accomplished is called the
antenna’s gain. It is measured in decibels (dB) and is one of the major factors
in choosing an antenna. In terms of effective radiated power (ERP), antennas
are rated on the basis of how much gain they have over a theoretical antenna
with zero gain. A 3 foot, 3dB gain antenna represents twice as much gain over
the imaginary antenna.
Typically a 3 foot 3dB gain stainless steel whip is used on a sailboat mast. The
longer 8 foot 6dB fiberglass whip is primarily used on power boats that require
the additional gain.
Page 8
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 COAXIAL CABLE
VHF antennas are connected to the transceiver by means of a coaxial cable –
a shielded transmission line. Coaxial cable is specified by it’s diameter and
construction.
For runs less than 20 feet, RG-58/U, about 1/4 inch in diameter is a good choice.
For runs over 20 feet but less than 50 feet, the larger RG-8X or RG-213/U
should be used for cable runs over 50 feet RG-8X should be used. For installa-
tion of the connector onto the coaxial cable refer to the figure below.
Adapter
1/16''
3/4''
3/4''
1 1/8''
1/8''
3/8'' 5/8''
To get your coax cable through a fitting and into your boat’s interior, you
may have to cut off the end plug and reattach it later. You can do this if
you follow the directions that come with the connector. Be sure to make
good soldered connections.
GX3500S
Page 9
Download from Www.Somanuals.com. All Manuals Search And Download.
8 INSTALLATION
8.1 LOCATION
The radio can be mounted at any angle. Choose a mounting location that:
• is far enough from any compass to avoid any deviation in compass read-
ing due to the speaker magnet
• provides accessibility to the front panel controls
• allows connection to a power source and an antenna
• has nearby space for installation of a microphone hanger
• the antenna must be mounted at least 3 feet from radio
Note: To insure the radio does not affect the compass or radios performance is
not affected by the antenna location, temporarily connect the radio in the de-
sired location and:
a. Examine the compass to see if the radio causes any deviation
b. Connect the antenna and key the radio. Check to ensure the radio is
operating correctly by requesting a radio check.
8.2 ELECTRICAL CONNECTIONS
CAUTION
Reverse polarity connections will damage the radio!
Connect the power cord and antenna to the radio. Antenna and Power Supply
connections are as follows (see Figure 1):
Optional HAIL/PA Horn
Antenna
Optional Speaker
Water proof
Deck Outlet
Fuse
Accessory Cable
Red
Black
Power Source
GPS Navigation Receiver
Figure 1. General Installation
1. Mount the antenna at least 3 feet away from the radio. At the rear of the
radio, connect the antenna cable. It must have a PL259 connector. RG-8/U
coaxial cable must be used if the antenna is 25 feet or more from the radio.
RG58 cable can be used for distances less than 25 feet.
Page 10
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the red power wire to a 13.8 VDC 20% power source. Connect
the black power wire to a negative ground.
3. If an optional remote extension speaker is to be used, refer to next section
for connections.
4. It is advisable to have a Certified Marine Technician check the power output
and the standing wave ratio of the antenna after installation.
8.3 ACCESSORY CABLE
White: External speaker (+)
Shield: External speaker (–)
Red: PA speaker (+)
Shield: PA speaker (–)
Blue: NMEA IN (+) from GPS navigation receiver
Green: NMEA IN (–) from GPS navigation receiver
Gray: NMEA OUT (+) to GPS navigation receiver
Brown: NMEA OUT (–) to GPS navigation receiver
When connecting the external speaker or GPS navigation receiver, strip off
about 1 inch (2.5 cm) of the specified wire’s insulation, then splice the ends
together using proper waterproofing techniques.
PA Speaker
-/*
Shield
Red
JKL
(
(
)
)
Blue
NMEA OUT
NMEA OUT
Green
Gray
(
(
)
NMEA IN
NMEA IN
)
Brown
Shield
White
DISTRESS
PULL OPEN
GPS Receiver
External Speaker
Wire Color/Description
Connection Examples
( )
WHITE - External Speaker + Connect to external 4 Ohm audio speaker
(–)
SHIELD - External Speaker
( )
(–)
Connect to external 4 Ohm audio speaker
Connect to external 4 Ohm PA speaker
Connect to external 4 Ohm PA speaker
RED - PA Speaker +
SHIELD - PA Speaker
(+)
(–)
BLUE- NMEA Input (+)
GREEN - NMEA Input
Connect to NMEA
Connect to NMEA
output of GPS
output of GPS
(–)
( )
Connect to NMEA + input of GPS
GRAY- NMEA Output (+)
(–)
(–)
input of GPS
BROWN-NMEA Output
Connect to NMEA
GX3500S
Page 11
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4 CONNECTION OF GPS WITH NMEA OUTPUT
Manufacturer/Model
STANDARD HORIZON
Furuno GP30, 36
Wires
Green
GX3500S
Green
Gray
Manufacturer/Model
Wires
Orange
Black (GND)
Gray
GX3500S
Blue
Lowrance Portable
Blue
Green
Blue
Brown
White
Blue
Magellan Fixed Mount
Magellan Portable
Northstar
Blue
Black (GND)
Orange
Black (GND)
Yellow
Green
Blue
Blue
Green
Blue
Furuno GP1650, 1850
Garmin Fixed Mounts
Garmin Portables
White
Green
Blue
Black
Green
Blue
Blue
Black (GND)
Yellow
Green
Blue
Black (GND)
Brown
Black (GND)
Yellow
Green
Green
Blue
Raytheon 420
Brown
Green
Blue
Green
Blue
Raytheon 520 / 620
Raytheon RL SERIES
Simrad
Blue
JRC GPS500
Brown
Green
Blue
Green
Blue
White
JRC 100 SERIES
Green
Brown
Green
Blue
Black
Green
Blue
White
JRC 200 SERIES
White
Brown
Green
Blue
Black
Green
Blue
Sitex Neptune, Nautilus
Gray
Lowrance Fixed Mount
White
Brown
Green
Black (GND)
Green
•
•
The GPS must have the NMEA Output turned on and set to 4800 Baud in
the setup menu. If there is a selection for parity select none.
For further information on interfacing /setting up your GPS. Please contact
the manufacturer of the GPS receiver.
•
•
GX3500S can read NMEA-0183 version 2.0 or higher.
The NMEA supported sentences are:
Input: GLL, GGA, RMC and GNS (RMC sentence is recommended)
Output:DSC and DSE
(DSC sentences to Standard Horizon Plotter for Position Polling)
If you have further inquires, please feel free to contact Product Support at:
Phone: (800) 767-2450
Email: [email protected]
8.5 CHECKING GPS CONNECTIONS
After connections have been made between the GX3500S and the GPS, a
small satellite icon will appear on the top right corner of
the LCD display. To see additional GPS information, press
[ ]
the F key momentarily, then press the 6 NAV key.
[ (
)]
The GX3500S shows the Date, Time, SOG and COG.
Page 12
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6 CHANGING THE GPS TIME
From the Factory the GX3500S shows GPS satellite time or UTC time. A time
offset is needed to show the local time in your area.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Time Set” with the
CHANNEL selector knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
[
]
5. Press the ENT key to store the time offset.
[
]
6. Press the 16/9 key or turn the CHANNEL selector knob to select “Exit,”
[
]
then press the ENT key to return to the “Radio Setup” menu, select “Exit”
[
and press the ENT key to return to radio operation.
]
OFFSET TIME TABLE
GX3500S
Page 13
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7 CHANGING THE TIME LOCATION
You may select the time display between local time and UTC (time GPS sends
to radio). Time is displayed when GPS position (LAT/LON) is displayed by press-
[ ]
ing the F key followed by the 6 NAV key.
[ (
)]
[
(
1. Press and hold down the CALL MENU key until
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Time Disp” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select “UTC” or
“Local.”
5. Press the ENT key to store the selected setting.
6. To exit this menu and return to radio operation mode
[
]
[
press the 16/9 key.
]
In the local time mode, the display shows the time by the 12-hour system.
Meanwhile, the display shows the time by the 24-hour system in the UTC mode.
(
)
(
)
“LOCAL” mode
“UTC” mode
Page 14
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
8.8 CHANGING COG TO TRUE OR MAGNETIC
Allows customizing the NAV data showing GPS Course Over Ground (COG).
Factory default is True however following the steps below the COG can be
changed to Magnetic.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Magnetic” with the
CHANNEL selector knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select “On” (rep-
resenting “Magnetic”) or “Off” (representing “True”).
[
5. Press the ENT key to store the selected setting.
]
6. Turn the CHANNEL selector knob to select “Exit,”
[
]
then press the ENT key to return to the “Radio
[
]
Setup” menu, select “Exit” and press the ENT key
to return to radio operation.
GX3500S
Page 15
Download from Www.Somanuals.com. All Manuals Search And Download.
8.9 OPTIONAL MMB-84 FLUSH MOUNT INSTALLATION
1. To assist in flush mounting, a template has been included. Use this tem-
plate to find the mounting location.
2. Use the template to mark the location where the rectangular hole is to be
cut. Confirm the space behind the dash or panel is deep enough to accom-
modate the transceiver (at least 6 inches or 15 cm deep).
There should be at least 1/2 inch (1.3 cm) between the transceiver’s heatsink
and any wiring, cables or structures.
3. Cut out the rectangular hole and insert the transceiver.
4. Fasten the brackets to the sides of the transceiver with the lock washer nut
combination; so that the mounting screw base faces the mounting surface
(see Figure 2).
5. Turn the adjusting screw to adjust the tension so that the transceiver is tight
against the mounting surface.
Bracket
Adjusting Screw
Lock-washer nut combination
Figure 2. MMB-84 Flush Mount Installation
Page 16
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
8.10 OPTIONAL ENHANCED RAM+ SECOND STATION MIC INSTALLATION
The GX3500S is capable of using up to 2 Enhanced RAM+ mics to remotely
control the Radio, DSC and PA/Fog functions. In addition the GX3500S can
operate as a full function intercom system. With 2 RAM+ mics connected the
GX3500S or RAM+ mics can selective call each station individually or all at one
time.
1. Connect the RAM+ MIC Cable to the RAM MIC CONNECTOR on the rear
panel, then tighten the Cable Nut (See Figure 3).
2. Referring to Figure 3, make a 1.2” (30 mm) hole in the wall, then insert the
RAM+ MIC Cable into this hole. Connect the Gasket and Mount Base to the
RAM+ MIC Cable Connector using the Nut.
3. Drill the four Screw holes (approx. 2 mm) on the wall, then install the Mounting
Base to the wall using four screws.
4. Put the Rubber Cap on to the Nut. The installation is now complete.
5. Wires for a external speaker are provided on the RAM+ mic cable. Connect
any 8 Ohm external speaker. When connected the RAM+ controls the vol-
ume level of this speaker.
RAM+ or External Speaker Selection
By default the RAM+ internal speaker is turned on, however using the RAM+
mic this speaker can be turned off so the external speaker can be used.
[
1. Press and hold the CALL/SET key on the RAM+ Mic.
]
[
]
[
]
2. Using the ꢀ or ꢁ keys to select “RAM
[
]
SPK” and press the CALL/SET key.
[
]
[
]
3. Press the ꢀ or ꢁ key to turn the RAM+
Speaker “oF.”
[
4. Press the 16/9 key to exit this mode.
]
EXP SP Cable for the RAM+ MIC
Wall
Gasket
Cap
RAM MIC Cable
Mounting Bracket
Nut
Figure 3. Enhanced RAM+ MIC Installation
GX3500S
Page 17
Download from Www.Somanuals.com. All Manuals Search And Download.
9 CONTROLS AND INDICATORS
NOTE
This section defines each control of the transceiver. See Figure 4 for
location of controls. For detailed operating instructions refer to section
“10 BASIC OPERATION.”
(
VOLUME CONTROL VOL
)
Adjusting this control clockwise, increases the audio volume level.
(
SQUELCH CONTROL SQL
)
Adjusting this control clockwise, sets the point at which random noise on
the channel does not activate the audio circuits but a received signal does.
This point is called the squelch threshold. Further adjustment of the squelch
control will degrade reception of wanted transmissions.
MICROPHONE CONNECTOR
Connect the supplied MH-63A6 Hand Microphone to this jack.
KEY BUTTON
[
]
16/9 Key
Immediately recalls channel 16 from any channel location. Holding down
[
]
this key recalls channel 9. Pressing the 16/9 key again reverts to the
previous selected working channel.
Secondary use
[
]
[
Press and hold the 16/9 key then press the WX key to switch the
]
Channel Group.
[
[
]
WX Key
Immediately recalls the previously selected NOAA weather channel from
any channel.
Secondary use
[
]
[
Holding down the 16/9 key while pressing the WX key changes the
]
Channel Group.
]
H/L Key
[
]
Toggles between 25 W (High) and 1 W (Low) power. When the H/L key
is pressed while the transceiver is on channel 13 or 67, the power will
temporarily switch from LO to HI power until the PTT is released.
[
The H/L key does not function on transmit inhibited and low power only
]
channels.
Page 18
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
-/*
JKL
DISTRESS
PULL OPEN
Figure 4. Controls and Connectors
GX3500S
Page 19
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
PWR Key
Turns the transceiver on and off. To turn the transceiver on, press and
hold this key until the LCD turns on. To turn it off, press and hold this key
until the LCD turns off. When the power is turned on, the transceiver is
set to the last selected channel.
CHANNEL SELECTOR KNOB
Rotary knob used to select channels and to choose menu items (such as the
[
DSC menu, radio setup menu, and DSC setup menu). The UP ꢀ
(
)]
/
[ ( )]
DOWN ꢁ keys on the microphone can also be used to select channels and
menu items.
When the PA/FOG mode is activated, the CHANNEL selector knob adjust
the audio output level.
Secondary Use (Depends on the transceiver version)
While holding down the [SCAN] key and turning the CHANNEL selector
knob, you can confirm memory channels for scanning.
KEYPAD
[ (
1 DIM Key
)]
When in radio mode, this key is used to directly select channel digit “1” in
a channel number.
Secondary use
[ ]
[ (
Press the F key first then press the 1 DIM key, access the LCD Dim-
)]
mer menu. Refer to section “10.15 LCD DIMMER” for details.
[ (
2 MEM Key
)]
When in radio mode, this key is used to directly select channel digit “2” in
a channel number.
Secondary use (Depends on the transceiver version)
[ ]
Press the F key first then press the 2 MEM key, memorize the se-
[ (
)]
lected channel into the transceiver scan memory for scanning. When
([ ]
[ (
repeat the same procedures F ꢁ 2 MEM , DELETES the channel
)])
from the scan memory. Refer to section “10.12 SCANNING” for details.
[ (
3 SCAN Key
)]
When in radio mode, this key is used to directly select channel digit “3” in
a channel number.
Secondary use (Depends on the transceiver version)
[ ]
[ (
)]
Press the F key first then press the 3 SCAN key, start and stop the
scanning of programmed channels. Refer to section “10.12 SCANNING”
for details.
Page 20
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
[ (
4 DW Key
)]
When in radio mode, this key is used to directly select channel digit “4” in
a channel number.
Secondary use (Depends on the transceiver version)
[ ]
[ (
)]
Press the F key first then press the 4 DW key, scan for voice commu-
nications on the priority channel and another selected channel until a
signal is received on either channel (Dual Watch). Refer to section “10.11
(
DUAL WATCH TO PRIORITY CHANNEL ” for details.
)
[ ( )]
5 IC Key
When in radio mode, this key is used to directly select channel digit “5” in
a channel number.
Secondary use
[ ]
[ ( )]
Press the F key first then press the 5 IC key, when the optional RAM+
Mic is connected, intercom operation will operate between radio and RAM+
Mic. Refer to section “10.16 INTERCOM OPERATION” for details.
[ (
6 NAV Key
)]
When in radio mode, this key is used to directly select channel digit “6” in
a channel number.
Secondary use
[ ]
[ (
)]
Press the F key first then press the 6 NAV key, the LCD displays NAV
GPS Data, Time, SOG (Speed Over Ground), and COG (Course Over
Ground) when a GPS is connected to the accessory cable of the
GX3500S. See section “8.4 CONNECTION OF GPS WITH NMEA OUT-
PUT” for details.
[ (
7 SCRM Key
)]
When in radio mode, this key is used to directly select channel digit “7” in
a channel number.
Secondary use
[ ]
[ (
)]
Press the F key first then press the 7 SCRM key, when the optional
CVS2500 Voice Scrambler Unit is installed, available to operate the Voice
Scrambler function. Refer to section “10.17 VOICE SCRAMBLER” for
details.
[ ( )]
8 PA Key
When in radio mode, this key is used to directly select channel digit “8” in
a channel number.
Secondary use
[ ]
[ ( )]
Press the F key first then press the 8 PA key, available to operate the
30 Watt PA function. Refer to section “10.13 PA/FOG OPERATION” for
details.
GX3500S
Page 21
Download from Www.Somanuals.com. All Manuals Search And Download.
[ (
9 FOG Key
)]
When in radio mode, this key is used to directly select channel digit “9” in
a channel number.
Secondary use
[ ]
[ (
)]
Press the F key first then press the 9 FOG key, available to operate
the Fog Horn function. Refer to section “10.13 PA/FOG OPERATION”
for details.
[ ]
0 Key
When in radio mode, this key is used to directly select channel digit “0” in
a channel number.
[
[
]
CLR Key
[
Press the CLR Key to cancel the menu selection and/or keypad entry.
]
]
ENT Key
[
]
Press the ENT Key to determine the menu selection and/or keypad
entry.
[
(
CALL MENU Key
)]
[
(
)]
Press the CALL MENU key to access the DSC OPERATION menu.
The “INDIVIDUAL CALL,” “GROUP CALL,” and “ALL SHIPS CALL” func-
tions can be accessed from the DSC OPERATION menu.
Secondary use
[
(
)]
Press and hold the CALL MENU key to access the “Radio Setup”
(refer to section “12 RADIO SETUP”) or “DSC Setup” menu (refer to
section “11 DIGITAL SELECTIVE CALLING”).
“Radio Setup” menu
“DSC Setup” menu
Page 22
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
[ ]
F Key
[ ]
Press the F key to activate the “Alternate” key function.
[
]
DISTRESS Key
Used to send a DSC Distress Call. To send the distress call refer to section
“11.3.1 (Transmitting A DSC Distress Call).”
ACCESSORY CONNECTION CABLE
Connects the GX3500S to a GPS, a PA speaker, and an external speaker.
DC INPUT CABLE
Connects the radio to a DC power supply capable of delivering 12V DC.
RAM+ MIC CONNECTORS
Connects the GX3500S to the enhanced RAM+ MIC (Remote Access Mi-
crophone). Refer to section “13 ENHANCED RAM+ MIC OPERATION” for
details.
ANTENNA JACK
Connects an antenna to the transceiver. Use a marine VHF antenna with
an impedance of 50 ohms.
PTT (Push-To-Talk) SWITCH
Keys the transmitter when the transceiver is in radio mode. If the transceiver
is in the intercom operation mode (between the RAM+ and the GX3500S),
or PA mode, it activates the GX3500S microphone for voice communica-
tions.
MICROPHONE
Transmits the voice message with reduction of background noise, using
Clear Voice Noise Reduction Technology.
MICROPHONE SPEAKER
The audio heard through internal radio speaker is heard through micro-
phone speaker.
[
(
)] [
(
)]
UP ꢀ / DOWN ꢁ KEYS
[
The UP ꢀ and DOWN ꢁ on the microphone function the same as the
( )]
[
( )]
CHANNEL selector knob on the front panel of the transceiver.
[
]
16/9 Key
[
Pressing the 16/9 key immediately recalls channel 16 from any location.
]
[
Press and hold the 16/9 key to recall channel 9. Pressing the 16/9 key
]
[
]
again will revert the radio to the previous selected channel.
GX3500S
Page 23
Download from Www.Somanuals.com. All Manuals Search And Download.
10 BASIC OPERATION
10.1 RECEPTION
1. After the transceiver has been installed, ensure that the power supply and
antenna are properly connected.
[
]
2. Press and hold the PWR key until the radio turns on.
3. Turn the SQL knob fully counterclockwise. This state is known as “squelch off”.
4. Turn up the VOL knob until noise or audio from the speaker is at a comfort-
able level.
5. Turn the SQL knob clockwise until the random noise disappears. This state
is known as the “squelch threshold.”
6. Turn the CHANNEL selector knob to select the desired channel. Refer to
the channel chart on page 78 for available channels.
7. The keypad on the front may be used to directly select channels. Example
to select channel 68:
[ (
)]
1. Press 6 NAV
[ ( )]
2. Press 8 PA
[
3. Press ENT
]
[ ]
In the USA and Canadian modes, press and hold in the 0 key to select the
“A” channel. Example to select channel 22A:
[ (
)]
)]
1. Press 2 MEM
[ (
2. Press 2 MEM
[ ]
3. Press 0 until “A” appears to the right of the channel number
[
4. Press ENT
]
8. When a message is received, adjust the volume to the desired listening
level. The “
” indicator in the LCD is displayed indicating that the chan-
nel is being used.
10.2 TRANSMISSION
1. Perform steps 1 through 6 of RECEPTION.
2. Before transmitting, monitor the channel to ensure it is clear.
THIS IS AN FCC REQUIREMENT!
3
Press the PTT (push-to-talk) switch. The “
” indicator in the LCD is
displayed.
4. Speak slowly and clearly into the microphone.
5. When the transmission is finished, release the PTT switch.
NOTE
This is a noise-canceling microphone. The oval slot on the bottom of
microphone should be positioned within 1/2 inch (1.3 cm) from the mouth
for optimum performance.
Page 24
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
(
)
10.3 TRANSMIT TIME - OUT TIMER TOT
When the PTT switch on the microphone is held down, transmit time is limited to
5 minutes. This limits unintentional transmissions due to a stuck microphone.
About 10 seconds before automatic transmitter shutdown, a warning beep will be
heard from the speaker(s). The transceiver will automatically go to receive mode,
even if the PTT switch is continually held down. Before transmitting again, the PTT
switch must first be released and then pressed again.
10.4 SIMPLEX/DUPLEX CHANNEL USE
Refer to the VHF MARINE CHANNEL CHART (page 78) for instructions on use
of simplex and duplex channels.
NOTE
All channels are factory-programmed in accordance with International,
Industry Canada (Canada), and FCC (USA) regulations. Mode of opera-
tion cannot be altered from simplex to duplex or vice-versa.
10.5 INTERNATIONAL, USA, AND CANADA MODE
[
]
[
]
1. To change the modes, hold the 16/9 key and press the WX key. The
mode changes from International to Canadian to USA with each press of
[
the WX key.
]
2. “INTL” will be displayed for International mode, and “CAN” will be displayed
for Canadian mode, and “USA” will be displayed on the LCD for USA mode.
3. Refer to the VHF MARINE CHANNEL CHART (page 78) for allocated chan-
nels in each mode.
10.6 NOAA WEATHER CHANNELS
NOTE
NOAA Weather channels are available in the waters of USA and Canada only.
[
1. To receive a NOAA weather channel, press the WX key from any channel.
]
The transceiver will go to the last selected weather channel.
[
2. Turn the CHANNEL selector knob on the radio or UP ꢀ / DOWN ꢁ
(
)] [
(
)]
keys on the microphone to select a different NOAA weather channel.
[
3. To exit from the NOAA weather channels, press the WX key. The trans-
]
ceiver returns to the channel it was on prior to a weather channel.
10.6.1 NOAA Weather Alert
In the event of extreme weather disturbances, such as storms and hurricanes,
the NOAA (National Oceanic and Atmospheric Administration) sends a weather
alert accompanied by a 1050 Hz tone and subsequent weather report on one of
the NOAA weather channels. When the Weather Alert feature is enabled (see
GX3500S
Page 25
Download from Www.Somanuals.com. All Manuals Search And Download.
section “12.9 WX ALERT”), the transceiver is capable of receiving this alert if
the following is performed:
1. Program NOAA weather channels into the transceiver’s memory for scan-
ning. Follow the same procedure as for regular channels under section “10.12.”
[
2. Press the SCAN key once to start memory scanning or hold down the
]
[
]
SCAN key during memory scanning to start priority scanning.
3. The programmed NOAA weather channels will be scanned along with the
regular-programmed channels. However, scanning will not stop on a nor-
mal weather broadcast unless a NOAA alert is received.
4. When an alert is received on a NOAA weather channel, scanning will stop and
the transceiver will emit a loud beep to alert the user of a NOAA broadcast.
[
5. Press the WX key to stop the alert tone and receive the weather report.
]
NOTE
[
If the WX key is not pressed the alert tone will be emitted for 5 minutes
]
and then the weather report will be received.
NOTE
The Weather Alert feature is also engaged while the transceiver is re-
ceiving on one of the NOAA weather channels.
10.6.2 NOAA Weather Alert Testing
NOAA tests the alert system ever Wednesday between 11AM and 1PM. To test
the QUANTUM’s NOAA Weather feature, on Wednesday between 11AM and
1PM, setup as in previous section and confirm the alert is heard.
10.7 EMERGENCY (CHANNEL 16 USE)
Channel 16 is known as the Hail and Distress Channel. An emergency is de-
fined as a threat to life or property. In such instances, be sure the transceiver is
on and set to CHANNEL 16. Then use the following procedure:
1. Press the microphone push-to-talk switch and say “Mayday, Mayday, May-
” (your vessel’s name).
” (your vessel’s name).
day. This is
,
,
2. Then repeat once: “Mayday,
3. Now report your position in latitude/longitude, or by giving a true or mag-
netic bearing (state which) to a well-known landmark such as a navigation
aid or geographic feature such as an island or harbor entry.
4. Explain the nature of your distress (sinking, collision, aground, fire, heart
attack, life-threatening injury, etc.).
5. State the kind of assistance your desire (pumps, medical aid, etc.).
6. Report the number of persons aboard and condition of any injured.
7. Estimate the present seaworthiness and condition of your vessel.
Page 26
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Give your vessel’s description: length, design (power or sail), color and
other distinguishing marks. The total transmission should not exceed 1
minute.
9. End the message by saying “OVER.” Release the microphone button and
listen.
10. If there is no answer, repeat the above procedure. If there is still no re-
sponse, try another channel.
(
10.8 CALLING ANOTHER VESSEL CHANNEL 16 OR 9
Channel 16 may be used for initial contact (hailing) with another vessel.
)
However, its most important use is for emergency messages. This channel
must be monitored at all times except when actually using another channel.
It is monitored by the U.S. and Canadian Coast Guards and by other vessels.
Use of channel 16 for hailing must be limited to initial contact only. Calling
should not exceed 30 seconds, but may be repeated 3 times at 2-minute inter-
vals. In areas of heavy radio traffic, congestion on channel 16 resulting from its
use as a hailing channel can be reduced significantly in U.S. waters by using
channel 9 as the initial contact (hailing) channel for non-emergency communi-
cations. Here, also, calling time should not exceed 30 seconds but may be
repeated 3 times at 2-minute intervals.
Prior to making contact with another vessel, refer to the channel charts in this
manual, and select an appropriate channel for communications after initial con-
tact. For example, Channels 68 and 69 are some of the channels available to
non-commercial (recreational) boaters. Monitor your desired channel in advance
to make sure you will not be interrupting other traffic, and then go back to either
channel 16 or 9 for your initial contact.
When the hailing channel (16 or 9) is clear, state the name of the other vessel
you wish to call and then “this is” followed by the name of your vessel and your
Station License (Call Sign). When the other vessel returns your call, immedi-
ately request another channel by saying “go to,” the number of the other chan-
nel, and “over.” Then switch to the new channel. When the new channel is not
busy, call the other vessel.
After a transmission, say “over,” and release the microphone’s push-to-talk
(PTT) switch. When all communication with the other vessel is completed, end
the last transmission by stating your Call Sign and the word “out.” Note that it is
not necessary to state your Call Sign with each transmission, only at the begin-
ning and end of the contact.
Remember to return to Channel 16 when not using another channel. Some
radios automatically monitor Channel 16 even when set to other channels or
when scanning.
GX3500S
Page 27
Download from Www.Somanuals.com. All Manuals Search And Download.
10.9 MAKING TELEPHONE CALLS
To make a radiotelephone call, use a channel designated for this purpose, The
fastest way to learn which channels are used for radiotelephone traffic is to ask
at a local marina. Channels available for such traffic are designated Public
Correspondence channels on the channel charts in this manual. Some ex-
amples for USA use are Channels 24, 25, 26, 27, 28, 84, 85, 86, and 87. Call
the marine operator and identify yourself by your vessel’s name, The marine
operator will then ask you how you will pay for the call (telephone credit card,
collect, etc.) and then link your radio transmission to the telephone lines.
The marine telephone company managing the VHF channel you are using may
charge a link-up fee in addition to the cost of the call.
10.10 OPERATING ON CHANNELS 13 AND 67
Channel 13 is used at docks and bridges and by vessels maneuvering in port.
Messages on this channel must concern navigation only, such as meeting and
passing in restricted waters.
Channel 67 is used for navigational traffic between vessels.
By regulation, power is normally limited to 1 Watt on these channels. Your radio
is programmed to automatically reduce power to this limit on these channels.
However, in certain situations it may be necessary to temporarily use a higher
[
power. See page 18 ( H/L key) for means to temporarily override the low-power
]
limit on these two channels.
(
)
10.11 DUAL WATCH TO PRIORITY CHANNEL
Dual watch allows the radio to monitor one channel and the assigned Priority
channel. By default the priority channel is set to 16, however the priority chan-
nel may be changed by referring to section 12.5 Priority Channel set.
1. Adjust the SQL knob until the background noise disappears.
2. Select the channel you wish to dual watch to “Priority channel.”
[ ]
[ (
)]
3. Press the F key followed by the 4 DW key.
The display will scan between Priority channel and
the channel that was selected in step 2.
If a transmission is received on the channel selected
in step 2, the GX3500S will dual watch between the
working channel and the Priority channel.
[
4. To stop Dual Watch, press the CLR key or press the F key followed by
]
[ ]
[ ( )]
the 4 DW key again.
Page 28
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
10.12 SCANNING
Allows the user to select the scan type from Memory scan or Priority scan.
“Memory scan” scans the channels that were programmed into memory. “Pri-
ority scan” scans the channels programmed in memory with the priority chan-
nel.
10.12.1 Selecting the Scan Type
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “SCAN Type” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select “Prior-
ity” or “Memory.”
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
(
10.12.2 Memory Scanning M-SCAN
)
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[ ]
CHANNEL selector knob. Press the F key followed
[ (
)]
by the 2 MEM key, “MEM” will appear on the LCD
which indicates the channel has been programmed
into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
[ ]
then press the F key followed by the 2 MEM key, “MEM” will disappear
[ (
)]
in the LCD.
[ ]
5. To start scanning, press the F key followed by the
[ ( )]
3 SCAN key.
“M-SCAN” appears on the LCD. Scanning will pro-
ceed from the lowest to the highest programmed
channel number and will stop on a channel when a transmission is received.
6. The channel number will blink during reception.
[
7. To stop scanning, press the 16/9 , WX , CALL MENU , or PTT key.
] [
] [
(
)]
GX3500S
Page 29
Download from Www.Somanuals.com. All Manuals Search And Download.
(
10.12.3 Priority Scanning P-SCAN
)
In the default setting, Channel 16 is set as the priority channel. You may change
the priority channel to the desired channel from the Channel 16 by the Radio
Setup Mode, refer to section “12.5 PRIORITY CHANNEL SET.”
1. Adjust the SQL knob until background noise disappears.
2. Select a desired channel to be scanned using the
[ ]
CHANNEL selector knob. Press the F key followed
[ (
)]
by the 2 MEM key, “MEM” will appear on the LCD
which indicates the channel has been programmed
into the transceivers memory.
3. Repeat step 2 for all the desired channels to be scanned.
4. To DELETE a channel from the transceiver’s memory, select the channel
[ ]
then press the F key followed by the 2 MEM key, “MEM” will disappear
[ (
)]
in the LCD.
[ ]
5. To start priority scanning, press the F key followed
[ (
)]
by the 3 SCAN key. “P-SCAN” appears on the LCD.
Scanning will proceed between the memorized chan-
nels and the priority channel. CH 16 the priority chan-
nel will be scanned after each programmed channel.
[
6. To stop scanning, press the 16/9 , WX , CALL MENU , or PTT key.
] [
] [
(
)]
You may change the scan resume time by the Radio Setup Mode, refer to
section “12.7 SCAN RESUME TIME.”
10.13 PA/FOG OPERATION
PA/FOG mode allows the transceiver to be used as a 30W hailer when an
optional STANDARD HORIZON 220SW or 240SW HAIL/PA Horn is installed.
When in Hail mode the HAIL/PA Listen’s Back (acts as a microphone and sends
sound to the front panel speaker) through the HAIL/PA speaker which provides
two-way communications through the HAIL/PA speaker.
NOTE
When in PA or FOG mode the GX3500S will receive the last selected VHF
channel before entering into the PA or FOG mode and receive DSC calls.
PA HAIL mode:
Allows the transceiver to be used as a power hailer when
an optional STANDARD HORIZON 220SW or 240SW
HAIL/PA Horn is installed. The Hail mode has a listen-back
feature which provides two way communication through
the HAIL/PA speaker.
FOG HORN mode: Automatic signaling is transmitted through the HAIL/PA
speaker.
Page 30
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
10.13.1 Operating the PA HAIL mode
[ ] [ ( )]
1. Press the F key followed by the 8 PA key to acti-
vate the PA HAIL mode.
2. Press the PTT switch to speak through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
3. To exit the PA HAIL mode and return to radio opera-
[ ] [ ( )]
tion mode, press the F key followed by the 8 PA key again.
10.13.2 Operating the FOG HORN mode
Operator can select from Underway, Stop, Sail, Tow, Horn, Siren, Aground, or
Anchor. Please refer to page 87 for FOG Horn Timing Chart.
[ ]
1. Press the F key followed by the 9 FOG key, acti-
[ (
)]
vate the “FOG HORN” menu.
2. Turn the CHANNEL selector knob to select the one
of the eight functions described above.
[
]
3. Press the ENT key.
4. On the “Horn” and “Siren” modes, press the PTT
switch to activate the tone through the HAIL/PA
speaker.
Rotate the CHANNEL selector knob to control the
AF output level. The AF output level can be set from
0 to 30 watts.
5. To exit the “FOG HORN” mode and return to radio operation mode, press
[ ]
the F key followed by the 9 FOG key again.
[ (
)]
10.14 NAVIGATION INDICATION
The transceiver has the ability to display Date, Time, SOG, COG, as well as the
position (LAT/LON), when connected to a GPS receiver.
[ ]
[ (
)]
1. Press the F key followed by the 6 NAV key, dis-
play the position information on the LCD. If the GPS
receiver is not receiving a fix, the display will be as
shown in the illustration on the right.
[ ]
2. To hide the position information, press the F key
[ ( )]
followed by the 6 NAV key again.
GX3500S
Page 31
Download from Www.Somanuals.com. All Manuals Search And Download.
10.15 LCD DIMMER
Allows setting up the backlight intensity or to turn it off.
[ ]
[ (
)]
1. Press the F key followed by the 1 DIM key to en-
abling the setting up the backlight intensity.
2. Turn the CHANNEL selector knob to select the de-
sired backlight intensity. You will be able to see the
effects of your changes.
[ ]
3. When you have completed the adjustment, press the F key followed by
[ (
the 1 DIM key again, return to radio operation mode.
)]
10.16 INTERCOM OPERATION
If the RAM+ Mic is connected to the GX3500S, you may communicate between
the GX3500S and RAM+ Mic, or RAM+ and RAM+ Mic (Refer to section “13.2
INTERCOM OPERATION”).
RAM 1
RAM 2
RAM 1
RAM 2
M
E
M
IC
M
EM
IC
M
EM
IC
M
EM
I
C
WX
WX
WX
WX
S
CA
N
DW
S
CA
N
DW
SCA
N
DW
SCA
N
DW
CALL
ET
CALL
S
C
A
L
L
C
A
L
L
NA
V
16
9
NAV
16
9
NAV
16
9
NA
V
16
9
S
E
T
S
E
T
S
E
T
-/
*
-/
*
JKL
JK
L
D
IST
R
E
S
S
DISTRESS
PU LL OPE
P
U
L
L
O
P
E
N
N
RAM 1
ꢀ
GX3500S
RAM 1
RAM 2
RAM 1
RAM 2
M
E
M
IC
M
EM
IC
M
EM
IC
M
EM
I
C
WX
WX
WX
WX
S
CA
N
DW
S
CA
N
DW
SCA
N
DW
SCA
N
DW
CALL
ET
CALL
S
C
A
L
L
C
A
L
L
NA
V
NAV
NAV
NA
V
16
9
16
9
16
9
16
9
S
E
T
S
E
T
S
E
T
-/
*
-/
*
JKL
JK
L
D
IST
R
E
S
S
DISTRESS
PU LL OPE
P
U
L
L
O
P
E
N
N
RAM 1
ꢀ
RAM 2
Page 32
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
10.16.1 Communication
[ ]
1. Press the F key followed by the 5 IC key, the mode
[ ( )]
is changed to “INTERCOM” mode.
2. If your GX3500S is equipped two RAM+ Mic’s, se-
lect the companion you wish to communicate (RAM1,
[
]
RAM2, or ALL) with the CHANNEL selector knob, then press the ENT key.
3. When the “INTERCOM” operation is
activated, “Intercom” is displayed on
the GX3500S, and “IC” is displayed on
the RAM+ Mic.
(
)
GX3500S’s PTT switch is pressed
4. Press the PTT switch. “Talk” will be
shown on the display.
NOTE: A warning beep will be emitted
when the GX3500S microphone’s PTT
switch is pressed while the RAM+ Mic’s
PTT switch is pressed.
(
)
RAM+ Mic’s PTT switch is pressed
5. Speak slowly and clearly into the microphone, hold the microphone about
1/2 inch away from your mouth.
6. When finished, release the PTT switch.
7. To exit the “INTERCOM” mode and return to radio operation mode, press
[ ] [ ( )]
the F key followed by the 5 IC key again.
10.16.2 Calling
Press and hold the 5 IC key for 1 second when the “INTERCOM” operation is
activated, a calling beep is emitted twice from the transceiver speaker.
[ ( )]
NOTE
When both RAM+ microphones are set to inter-
com mode, the GX3500S will be temporarily dis-
abled until the RAM+(s) exit the RAM+ to RAM+
intercom mode.
GX3500S
Page 33
Download from Www.Somanuals.com. All Manuals Search And Download.
10.17 VOICE SCRAMBLER
If privacy of communications is desired, a CVS2500 voice scrambler (VS) can
be installed in the transceiver. Contact your Dealer to have a CVS2500 installed.
[ ]
[ (
)]
1. Press the F key followed by the 7 SCRM key, the
voice scrambler is activated. “VS” will appear on the
LCD.
[ ]
2. Press the F key then press and hold the 7 SCRM
[ (
)]
key for 1 second, the “SCRM Code” will appear.
3. Turn the CHANNEL selector knob to change the
scrambler code. The scrambler code can be set from
“0” to “3.”
[
]
4. Press the ENT key to save the scrambler code and return to radio opera-
tion mode (with voice scrambler).
5. Monitor the channel before transmitting.
[ ]
6. To disable the voice scrambler, press the F key followed by the 7 SCRM
[ (
)]
key again.
Page 34
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
GX3500S
Page 35
Download from Www.Somanuals.com. All Manuals Search And Download.
11 DIGITAL SELECTIVE CALLING
11.1 GENERAL
WARNING
This radio is designed to generate a digital maritime distress and safety
call to facilitate search and rescue. To be effective as a safety device,
this equipment must be used only within communication range of a shore-
based VHF marine channel 70 distress and safety watch system. The
range of signal may vary but under normal conditions should be approxi-
mately 20 nautical miles.
NOTE
WARNING
STICKER
A DSC Warning sticker is included
with the GX3500S. To comply with
FCC regulations this sticker must be
-*/
JK
L
mounted in a location that can be eas-
ily viewed from the location of the
GX3500S. Make sure the chosen lo-
cation is clean and dry before apply-
ing the sticker.
DI
S
T
R
E
S
S
P
U
L
L
O
P
E
N
Digital Selective Calling is a semi-automated method of establishing a radio
call, it has been designated by the International Maritime Organization (IMO)
as an international standard for establishing VHF, MF and HF radio calls. It has
also been designated as part of the Global Maritime Distress and Safety Sys-
tem (GMDSS). It is planned that DSC will eventually replace aural watches on
distress frequencies and will be used to announce routine and urgent maritime
safety information broadcasts.
This new system allows mariners to instantly send a distress call with GPS posi-
tion (when connected to the transceiver) to the Coast Guard and other vessels
within range of the transmission. DSC will also allow mariners to initiate or receive
Distress, Urgency, Safety, Routine, POSITION REQUEST, POSITION SEND, and
Group calls to or from another vessel equipped with a DSC transceiver.
Page 36
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.2 MARITIME MOBILE SERVICE IDENTITY (MMSI)
11.2.1 What is an MMSI?
An MMSI is a nine digit number used on Marine Transceivers capable of using
Digital Selective Calling (DSC). This number is used like a telephone number to
selectively call other vessels.
THIS NUMBER MUST BE PROGRAMMED INTO THE RADIO TO OPERATE
THE GX3500S DSC FUCTIONS.
How can I obtain an MMSI assignment?
11.2.2 Programming the MMSI
WARNING
User MMSI can be input only twice. If the user tries to input an MMSI
more than twice, the radio will show the display on
the right. If the user needs to change the MMSI
more than twice, the transceiver will have to be
sent to Factory Service. Refer to the section “14.2.
FACTORY SERVICE.”
[
1. Press and hold down the CALL MENU key until
(
)]
the “Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to the left to se-
lect “DSC Setup” menu.
[
]
3. Press the ENT key, then select “User MMSI” with
the CHANNEL selector knob.
[
]
4. Press the ENT key. The “User MMSI” number will
appear, and the first digit will be flashing.
5. Enter the your MMSI (up to nine digits) from the key-
pad.
[
]
6. Press and hold the ENT key to store the number in
memory.
7. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
GX3500S
Page 37
Download from Www.Somanuals.com. All Manuals Search And Download.
11.3 DSC DISTRESS CALL
The GX3500S is capable of transmitting and receiving DSC Distress messages
to all DSC radios. The GX3500S may be connected to a GPS to also transmit
the Latitude, Longitude of the vessel.
11.3.1 Transmitting a DSC Distress Call
NOTE
To be able to transmit a DSC distress call an MMSI number must be
programmed, refer to section “11.2.2 Programming the MMSI.”
In order for your ships location to be transmitted a GPS must be connected to
the GX3500S, refer to section “8.4 CONNECTION OF GPS WITH NMEA OUT-
PUT.”
[
1. Lift the red spring loaded DISTRESS cover and press the DISTRESS key.
]
The “DISTRESS” menu will appear on the LCD.
[
]
2. Press and hold the DISTRESS key. The radios dis-
play will count down (3-2-1) and then transmit the
Distress call.
3. When the distress signal is sent, CH70 and “
”
icon will appear on the LCD. After the message has
been sent, the radio will sound a Distress Alarm.
4. The transceiver will watch for a DSC acknowledg-
ment transmission on CH70 and also receive calls
on CH16.
5. If an acknowledgement is received, select channel
16 and advise your distress situation.
6. If no acknowledgment is received, the distress call is
repeated in 4 minute intervals until a DSC acknowl-
edgment is received.
7. When a DSC Distress acknowledgment is received,
a distress alarm sounds and channel 16 is automati-
cally selected. The LCD shows the MMSI of the ship
responding to your distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast station.
8. To cancel the DSC distress alarm signal from the speaker, press any key.
Page 38
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmitting a DSC Distress Call with Nature of Distress
The GX3500S is capable of transmitting a DSC Distress Call with the following
“Nature of Distress” categories:
Undesignated, Fire, Flooding, Collision, Grounding, Capsizing, Sinking,
Adrift, Abandoning, Piracy, MOB
1. Lift the red spring loaded DISTRESS cover and press the [DISTRESS] key.
The “DISTRESS” menu will appear on the LCD.
2. Turn the CHANNEL selector knob to select the de-
sired nature of distress category.
[
]
3. Press and hold the DISTRESS key. The radios dis-
play will count down (3-2-1) and then transmit the
Distress call.
4. When the distress signal is sent, CH70 and “
”
icon will appear on the LCD. After the message has
been sent, the radio will sound a Distress Alarm.
5. The transceiver will watch for a DSC acknowledg-
ment transmission on CH70 and also receive calls
on CH16.
6. If an acknowledgement is received, select channel
16 and advise your distress situation.
7. If no acknowledgment is received, the distress call is
repeated in 4 minute intervals until a DSC acknowl-
edgment is received.
8. When a DSC Distress acknowledgment is received,
a distress alarm sounds and channel 16 is automati-
cally selected. The LCD shows the MMSI of the ship
responding to your distress.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast station.
9. To cancel the DSC distress alarm signal from the speaker, press any key.
Cancel a DSC Distress Call
If a DSC Distress call was sent by error the GX3500S
allows you to send a message to other vessels to cancel
the Distress Call that was made in error.
[
Press the CLR key, then press the ENT key.
]
[
]
GX3500S
Page 39
Download from Www.Somanuals.com. All Manuals Search And Download.
11.3.2 Receiving a DSC Distress Call
1. When a DSC Distress call is received, an emergency
alarm sounds.
Then channel 16 is automatically selected.
2. Press any key to stop the alarm.
3. Turn the CHANNEL selector knob to change the dis-
play to show the position of the vessel in distress.
4
If the position of the vessel distress data does not
include position, the LCD will show the display on the
left.
NOTE
You must continue monitoring channel 16 as a coast station may require
assistance in the rescue attempt.
11.4 ALL SHIPS CALL
The All Ships Call function allows contact to be established with other vessel
stations without having their ID in the individual calling directory. Also, priority
for the call can be designated as Urgency or Safety.
URGENCY Call: This type of call is used when a vessel may not truly be in
distress, but have a potential problem that may lead to a dis-
tress situation. This call is the same as saying PAN PAN PAN
on channel 16.
SAFETY Call: Used to transmit boating safety information to other vessels.
This message usually contains information about an overdue
boat, debris in the water, loss of a navigation aid or an impor-
tant meteorological message. This call is the same as saying
Securite, Securite, Securite.”
Page 40
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.4.1 Transmitting an All Ships Call
[
1. Press the CALL MENU key. The “DSC Operation”
(
)]
menu will appear.
2. Turn the CHANNEL selector knob to select “All Ships.”
[
3. Press the ENT key. (To cancel, turn the CHANNEL
]
selector knob to select “Exit.”)
4. Turn the CHANNEL selector knob to select the call
(“Urgency” or “Safety”).
[
]
5. Press the ENT key to transmit the selected type of
all ships DSC call.
6. After the ALL SHIPS CALL is transmitted, the trans-
ceiver will switch to CH16.
7. Listen to the channel to make sure it is not busy, then
key the microphone and say PAN PAN PAN or
“Securite, Securite, Securite” depending on the pri-
ority of the call. Say your call sign and announce the
channel you wish to switch to for communications.
11.4.2 Receiving an All Ships Call
1. When an all ships call is received, an emergency
alarm sounds.
The radio will automatically change to channel 16.
2. Press any key to stop the alarm.
3. Turn the CHANNEL selector knob to see the MMSI
of the vessel transmitting the All Ships Call.
4. Monitor channel 16 or traffic channel until the UR-
GENCY voice communication is completed.
GX3500S
Page 41
Download from Www.Somanuals.com. All Manuals Search And Download.
11.5 INDIVIDUAL CALL
This feature allows the GX3500S to contact another vessel with a DSC VHF
radio and automatically switch the receiving radio to a desired communications
channel. This feature is similar to calling a vessel on CH16 and requesting to
go to another channel (switching to the channel is private between the two
stations).
11.5.1 Setting up the Individual / Position Call Directory
The GX3500S has a DSC directory that allows you to store a vessel or person’s
name and the MMSI number associated with vessels you wish to transmit Indi-
vidual calls, Position Requests and Position Send transmissions.
To transmit an Individual call you must program this directory with information
of the persons you wish to call, similar to a cellular phones telephone directory.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
3. Press the ENT key, then select “INDIV DIR” with the
]
CHANNEL selector knob.
[
4. Press the ENT key, then select “Add” with the CHAN-
]
NEL selector knob.
[
5. Press the ENT key.
]
6. Press the one of the Keypad keys to enter the first
letter of the name of the vessel or person you want to
reference in the directory.
[ (
Example: Press the 2 MEM key repeatedly to toggle
)]
among the seven available characters associated
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
with that key: 2
If a mistake was made entering in the name, press-
A
B
C
a
b
c.
[
ing the CLR key to delete the wrong character.
]
[
]
7. Press the ENT key to store the first letter in the name
and step to the next letter to the right.
8. Repeat step 6 and 7 until the name is complete. The
name can consist of up to eleven characters, if you
[
do not use all eleven characters press the ENT key to move to the next
]
space. This method can also be used to enter a blank space in the name.
[
To clear the previous letter, press the CLR key.
]
[
]
9. After the eleventh letter or space has been entered, press the ENT key to
advance to the MMSI (Maritime Mobile Service Identity Number) number
entry.
Page 42
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Enter the MMSI number by the keypad. If a mistake
[
was made entering in the number, pressing the CLR
]
key to delete the wrong character.
11. To store the data entered, press and hold the ENT
key.
[
]
12. To enter another individual address, repeat steps 4 through 12.
[
13. To exit this menu and return to radio operation mode press the 16/9 key.
]
NOTE
Selecting “Next” or “Exit” will automatically save the name and MMSI
number into memory.
11.5.2 Setting up Individual Reply
Allows setting up the radio to automatically (default setting) or manually re-
spond to a DSC Individual call requesting you to switch to a working channel for
voice communications. When Manual is selected the MMSI of the calling ves-
sel is shown allowing you to see who is calling. This function is similar to caller
id on a cellular phone.
[
(
1. Press and hold down the CALL MENU key until
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
]
3. Press the ENT key, then select “INDIV Reply” with
the CHANNEL selector knob.
[
]
4. Press the ENT key.
5. Turn the CHANNEL selector knob to select “Auto”
or “Manual.”
[
6. Press the ENT key to store the selected setting.
]
7. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
GX3500S
Page 43
Download from Www.Somanuals.com. All Manuals Search And Download.
11.5.3 Setting up the Individual/Group Call Ringer
When a Individual Call or Group Call is received the radio will produce a ringing
tone for 3 minutes. This selection allows the Individual Call ringer time to be
changed.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
3. Press the ENT key, then select “INDIV Ring” with
]
the CHANNEL selector knob.
[
]
4. Press the ENT key.
5. Turn the CHANNEL selector knob to select ringing
time of a Individual Call.
[
6. Press the ENT key to store the selected setting.
]
7. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
The GX3500S has the capability to turn off the Individual call ringer.
[
(
1. Press and hold down the CALL MENU key until
)]
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
3. Press the ENT key, then select “DSC Beep” with the
]
CHANNEL selector knob.
[
4. Press the ENT key.
]
5. Turn the CHANNEL selector knob to select “Individual”
if you wish to disable the Individual Call ringer, or
“Group” if you wish to disable the Group Call ringer
[
]
and press the ENT key.
6. Turn the CHANNEL selector knob to select “Off.”
[
7. Press the ENT key to store the selected setting.
]
8. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “On” in step “6” above.
Page 44
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.5.4 Transmitting an Individual Call
This feature allows the user to contact another vessel with a DSC radio. This
feature is similar to calling a vessel on CH16 and requesting to go to another
channel.
Pre-Programmable Calling
[
1. Press the CALL MENU key. The “DSC Operation”
(
)]
menu will appear.
2. Turn the CHANNEL selector knob to select “Indi-
vidual.” (To cancel, select “Exit” with the CHANNEL
[
]
selector knob or press the 16/9 key.)
[
3. Press the ENT key. The transceiver will beep, and
]
the “Individual directory” will appear.
4. Turn the CHANNEL selector knob to select the “Indi-
vidual” you want to contact.
[
5. Press the ENT key, then turn the CHANNEL selec-
]
tor knob to select the operating channel you want to
[
communicate on and press the ENT key.
]
[
6. Press the ENT key again to transmit the individual
]
DSC signal.
7. After INDIVIDUAL CALL is transmitted, the trans-
ceiver will wait 8 seconds for the acknowledgment. If
the reply signal is not received, the transceiver will
transmit again.
8. After the second INDIVIDUAL CALL is transmitted, if the reply signal is not
received, the display will be as shown in the illustra-
tion on the right. To send the call again, press the
[
]
ENT key.
9. When an individual call acknowledgment is received,
the established channel is automatically changed to
the channel which is selected on step 5 above and a
ringing tone sounds.
any
10. Press
key to listen to the channel to make sure it
is not busy, then key the microphone and call the
other vessel you desire to communicate with.
GX3500S
Page 45
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual Directory.
[
1. Press the CALL MENU key. The “DSC Operation”
(
)]
menu will appear.
2. Turn the CHANNEL selector knob to select “Indi-
vidual.” (To cancel, select “Exit” with the CHANNEL
[
selector knob or press the 16/9 key.)
]
[
]
3. Press the ENT key. The transceiver will beep, and
the “Individual directory” will appear.
4. Turn the CHANNEL selector knob to select “Manual,”
[
then press the ENT key.
]
5. Enter the MMSI number (nine digits) which you want
[
to contact by the keypad, then press the ENT key.
]
6. Turn the CHANNEL selector knob to select “Manual,”
[
]
then press the ENT key.
7. Turn the CHANNEL selector knob to select the oper-
ating channel which you want to use for communica-
[
tion, then press the ENT key.
]
[
]
8. Press the ENT key again to transmit the individual
DSC signal.
9. After INDIVIDUAL CALL is transmitted, the trans-
ceiver will wait 8 seconds for the acknowledgment. If
the reply signal is not received, the transceiver will
transmit again.
10. After the second INDIVIDUAL CALL is transmitted, if
the reply signal is not received, the display will be as
shown in the illustration on the right. To send the call
[
]
again, press the ENT key or to exit the mode, press
[
the CLR key.
]
11. When an individual call acknowledgment is received,
the established channel is automatically changed to
the channel which is selected on step 5 above and a
ringing tone sounds.
any
9. Press
key to listen to the channel to make sure it is not busy, then key
the microphone and call the other vessel you desire to communicate with.
Page 46
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.5.5 Receiving an Individual Call
When receiving an individual call, an acknowledgment must be sent back to the
calling station. The GX3500S default setting is Automatic, but has a selection
that allows you to manually send a reply before the radio will switch to the re-
quested calling channel. This selection is useful if you want to see who is calling
and requesting you to switch to a channel for communications, similar to caller id
on a cellular phone.
1. When an individual call is received, an individual call ringing alarm sounds.
The radio automatically switches to the requested
channel.
2. Press any key to stop the alarm.
3. Press the PTT on the mic and talk to the calling ship.
11.5.6 Setting Up the Call Waiting Function
Allows the GX3500S to be setup to reply (ABLE) or set the radio so it transmits
a call that advises the calling vessel the person is UNABLE to reply to the call at
this time. This function is similar to an answering machine. When set up in
UNABLE and a individual call is received the Individual call from the other ves-
sel is logged in the CALL WAITING directory for you to review and call back at
a later time.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
]
3. Press the ENT key, then select “INDIV ACK” with
the CHANNEL selector knob.
[
4. Press the ENT key.
]
5. Turn the CHANNEL selector knob to select “Able” or
“Unable.”
[
6. Press the ENT key to store the selected setting.
]
7. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
GX3500S
Page 47
Download from Www.Somanuals.com. All Manuals Search And Download.
11.6 GROUP CALL
This feature allows the user to contact a group of specific vessels (example
members of a yacht club) using DSC radios with Group call function to auto-
matically switch to a desired channel for voice communications.
11.6.1 Setting up a Group Call
For this function to operate the same Group MMSI must be programmed into
all the DSC VHF radios within the group of vessels that will be using this fea-
ture. The group MMSI is a 9 digit (first digit permanently set to “0”) that will allow
other radios to call your vessel along with others to automatically switch to a
working channel for voice communications. This function is very useful for yacht
clubs and vessels traveling together that want to collectively make announce-
ments on a predetermined channel.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
]
3. Press the ENT key, then select “Group DIR” with
the CHANNEL selector knob.
[
]
4. Press the ENT key, then select “Add” with the
CHANNEL selector knob.
[
5. Press the CALL MENU key.
(
)]
6. Press the one of the Keypad keys to enter the first
letter of the name of the group you want to reference
in the directory.
[ (
Example: Press the 2 MEM key repeatedly to toggle
)]
among the seven available characters associated
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
with that key: 2
If a mistake was made entering in the name, press-
A
B
C
a
b
c.
[
ing the CLR key to delete the wrong character.
]
[
]
7. Press the ENT key to enter the desired letter and
move the cursor one space to the right.
8. Repeat step 6 and 7 until the name is complete. The name can consist of
up to eleven characters, if you do not use all eleven
[
]
characters press the ENT key to move to the next
space. This method can also be used to enter a blank
space in the name. To clear the previous letter, press
[
the CLR key.
]
[
9. After the eleventh letter or space has been entered, press the ENT key to
]
advance to the GROUP MMSI (Maritime Mobile Service Identity Number)
Page 48
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
number entry.
10. Enter the MMSI number by the keypad. If a mistake
[
was made entering in the number, press the CLR
]
key to delete the wrong character.
11. To enter the desired number and move one space to
[
the right press the ENT key. Repeat procedure until all nine spaces of
]
MMSI number are entered.
12. If a mistake was made entering in the name or the MMSI number repeat
[
]
pressing the ENT key until the wrong character is selected, then move the
CHANNEL selector knob to correct the entry.
13. To store the data entered, press and hold the ENT key.
[
]
14. To enter another individual address, repeat steps 4 through 13.
15. To exit this menu and return to radio operation mode press the 16/9 key.
[
]
11.6.2 Transmitting a Group Call
Pre-Programmable Calling
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear.
2. Turn the CHANNEL selector knob to select “Group.”
(To cancel, select “Exit” with the CHANNEL selector
[
knob or press 16/9 key.)
]
[
3. Press the ENT key. The transceiver will beep, and
]
the “Group Directory” will appear.
4. Turn the CHANNEL selector knob to select the
“Group” you want to contact.
[
]
5. Press the ENT key, then turn the CHANNEL selec-
tor knob to select the operating channel you want to
[
communicate on and press the ENT key.
]
[
6. Press the ENT key again to transmit the Group Call
]
signal.
7. After the GROUP CALL is transmitted, all the radios
in the group will switch to the designated channel.
8. Listen to the channel to make sure it is not busy, then
key the microphone and call the other vessels you
desire to communicate with.
GX3500S
Page 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Group call number.
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear.
2. Turn the CHANNEL selector knob to select “Group.”
(To cancel, select “Exit” with the CHANNEL selector
[
]
knob or press 16/9 key.)
[
3. Press the ENT key. The transceiver will beep, and
]
the “Group Directory” will appear.
4. Turn the CHANNEL selector knob to select “Manual,”
[
then press the ENT key.
]
5. Enter the MMSI number (eight digits) which you want
[
to contact by the keypad, then press the ENT key.
]
6. Turn the CHANNEL selector knob to select “Manual,”
[
then press the ENT key.
]
7. Turn the CHANNEL selector knob to select the oper-
ating channel which you want to communicate on,
[
]
then press the ENT key.
[
]
8. Press the ENT key again to transmit the Group Call
signal.
9. After the GROUP CALL is transmitted, all the radios
in the group will switch to the designated channel.
10. Listen to the channel to make sure it is not busy, then
key the microphone and call the other vessels you
desire to communicate with.
Page 50
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.6.3 Receiving a Group Call
1. When a group call is received, the GX3500S will pro-
duce a ringing alarm sound.
2. The radio automatically switches to the requested
channel.
3. Press any key to stop the alarm.
4. Monitor the channel for the person calling the Group
for a message.
5. If you want to respond, monitor the channel to make sure it is clear, then
press the PTT on the mic and talk to the calling ship(s).
NOTE
After a Group call is received, the time the call was made and the ships
MMSI or vessels name will appear on the LCD.
GX3500S
Page 51
Download from Www.Somanuals.com. All Manuals Search And Download.
11.7 POSITION REQUEST
Advancements in DSC have made it possible to poll the location of another
vessel and show the position of that vessel on the display of the GX3500S.
Standard Horizon has taken this feature one step further, if any Standard Hori-
zon GPS is connected to the GX3500S, the polled position of the vessel is
shown on the display of the GPS chart plotter making it easy to navigate to the
location of the polled vessel. This is a great feature for anyone wanting to know
the position of another vessel. For example your buddy that is catching fish, or
finding the location of a person you are cruising with.
NOTE
The other vessel must have an operating GPS receiver connected to its
DSC transceiver and must not have its transceiver set to deny position
requests. (Refer the section 11.5.1 to enter information into the indi-
vidual directory).
11.7.1 Setting up Position Reply
The GX3500S can be set up to automatically or manually send your position to
another vessel. This selection is important if you are concerned about some-
one polling the position of your vessel that you may not want to. In the manual
mode you will see the MMSI or persons name shown on the display allowing
you to choose to send your position to the requesting vessel.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
]
3. Press the ENT key, then select “POS Reply” with
the CHANNEL selector knob.
[
4. Press the ENT key.
]
5. Turn the CHANNEL selector knob to select “Auto”
or “Manual.” In “Auto” mode, after a DSC POS Re-
quest is received, the radio will automatically trans-
mit your vessels position. In “Manual” mode, the dis-
play of the GX3500S will show who is requesting the
position.
[
6. Press the ENT key to store the selected setting.
]
[
7. To exit this menu and return to radio operation mode press the 16/9 key.
]
Page 52
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
The GX3500S has the capability to turn off the Position Request ringer.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appear.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
3. Press the ENT key, then select “DSC Beep” with the
]
CHANNEL selector knob.
[
]
4. Press the ENT key.
5. Turn the CHANNEL selector knob to select “POS
Request.”
6. Turn the CHANNEL selector knob to select “Off.”
[
7. Press the ENT key to store the selected setting.
]
8. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “On” in step “6” above.
11.7.2 Transmitting a Position Request to Another Vessel
Pre-Programmable Request
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select “POS Re-
quest.”
[
]
3. Press ENT key to show the Position request direc-
tory. This directory uses the INDIVIDUAL Directory
information.
4. Turn the CHANNEL selector knob to select a name,
[
]
then press the ENT key.
[
]
5. Press the ENT key to transmit the position request
DSC call.
6. When the GX3500S receives the position from the
polled vessel it is shown on the radio display and
also transferred to the GPS Chart plotter.
7. If the GX3500S does not receive a reply, the display
will be as shown in the illustration on the right. To
[
send again, press the ENT key.
]
GX3500S
Page 53
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE
If the GX3500S does not receive position data from the polled vessel,
the LCD will show “NO POSITION DATA.”
Manual Request
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select “POS Re-
quest.”
[
]
3. Press ENT key to show the Position request direc-
tory. This directory uses the INDIVIDUAL Directory
information.
4. Turn the CHANNEL selector knob to select the
]
[
“Manual,” then press the ENT key.
5. Enter the MMSI number (eight digits) which you want
[
to contact by the keypad, then press the ENT key.
]
[
6. Press the ENT key to transmit the position request
]
DSC call.
7. When the GX3500S receives the position from the
polled vessel it is shown on the radio display and
also transferred to the GPS Chart plotter.
8. If the GX3500S does not receive a reply, the display
will be as shown in the illustration on the right. To
[
send again, press the ENT key.
]
Page 54
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.7.3 Receiving a Position Request
When a position request call is received from another vessel, a ringing alarm
will sound and POS REQUEST will be show in the LCD. Operation and trans-
ceiver function differs depending on “POS Reply” in the “DSC Setup” menu
setting.
Automatically reply:
1. When a position request call is received, a calling alarm sounds 4 times.
Then requested position coordinates are transmit-
ted automatically to the vessel requesting your ves-
sels position.
2. To exit from position request display, press any key.
Manually reply:
1. When a position request call is received from an-
other vessel, the LCD will be as shown in the illustra-
tion at the right.
2. A ringing alarm sounds 4 times. Then select type of
reply function “Send” or “No Reply” by using the
CHANNEL selector knob.
3. The GX3500S display will show “Send” or “No Re-
ply” allowing you to send your vessels location by
using the CHANNEL selector knob.
[
]
4. When “Send” is selected, press the ENT key. And your position will be
transmitted to the requesting vessel.
[
5. To exit from position request display, press the 16/9 key.
]
GX3500S
Page 55
Download from Www.Somanuals.com. All Manuals Search And Download.
11.8 POSITION SEND
The feature is similar to Position Request, however instead of requesting a
position of another vessel this function allows you to send your position to an-
other vessel. Your vessel must have an operating GPS receiver connected for
the GX3500S to send the position.
11.8.1 Setting up a Position Send Ringer
The GX3500S has the capability to turn off the Position Send ringer.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
3. Press the ENT key, then select “DSC Beep” with the
]
CHANNEL selector knob.
[
]
4. Press the ENT key.
5. Turn the CHANNEL selector knob to select “POS
Send.”
6. Turn the CHANNEL selector knob to select “Off.”
[
7. Press the ENT key to store the selected setting.
]
8. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
If you wish to return to enabling the ringer tone, just re-
peat the above procedure, turning the CHANNEL selec-
tor knob to select “On” in step “6” above.
Page 56
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
11.8.2 Transmitting a DSC Position Send Call
Pre-Programmable Calling
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS
Send.”
[
3. Press the ENT key to select the Individual directory.
]
4. Turn the CHANNEL selector knob to select a name
[
in the directory, then press the ENT key.
]
[
5. Press the ENT key to send your position to the se-
]
lected vessel.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
[
(
)]
1. Press the CALL MENU key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS
Send.”
[
]
3. Press ENT key to show the Position Send directory.
This directory uses the INDIVIDUAL Directory infor-
mation.
4. Turn the CHANNEL selector knob to select “Manual,”
[
then press the ENT key.
]
5. Enter the MMSI number (eight digits) which you want
[
to contact by the keypad, then press the ENT key.
]
[
6. Press the ENT key to send your position to the se-
]
lected vessel.
GX3500S
Page 57
Download from Www.Somanuals.com. All Manuals Search And Download.
11.8.3 Receiving a DSC Position Send Call
When another vessel transmits their vessels location to the GX3500S the fol-
lowing will happen:
1. A ringing sound will be produced when the call is received.
[
2. Press the 16/9 key to stop ringing
]
3. The position from the vessel sending it's position will be shown on the dis-
play of the radio and also transferred to any Standard Horizon GPS Chart
plotter if connected.
Page 58
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
(
11.9 MANUAL INPUTTING OF THE GPS LOCATION LAT/LON
You may send the Latitude/Longitude of your vessel manually even if the
)
GX3500S is not connected the GPS receiver unit.
After the position is entered, transmitting a DSC Distress, Position Request, or
Position Send will contain the manually entered position.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
2. Turn the CHANNEL selector knob to select “DSC
Setup” menu.
[
]
3. Press the ENT key, then select “POS Input” with
the CHANNEL selector knob.
[
]
4. Press the ENT key. The transceiver will beep, and
the display will be as shown in the illustration on the
right.
5. Enter the your local time from the keypad by the 24-
[
hour system on the UTC time, then press the ENT
]
key.
6. Enter the Latitude/Longitude of your vessel location
[
by the keypad, then press the ENT key. To select
]
[ ( )]
North (N) press 6 NAV key, South (S) press the
[ ( )] [ ( )]
7 SCRM key, East (E) press the 3 SCAN key or
[ ( )]
West (W) press the 9 FOG key.
7. To store the data entered, press the 16/9 key to exit
this menu and return to radio operation mode.
[
]
GX3500S
Page 59
Download from Www.Somanuals.com. All Manuals Search And Download.
12 RADIO SETUP
NOTE
The optional RAM+ MIC CMP25 can also change the RADIO SETUP
menu. Refer to page 74 for details.
12.1 LCD CONTRAST
This selection sets up the display for best viewabilty for the varying mounting
locations (overhead or below).
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Contrast” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select the de-
sired level. The contrast level can be set from “0” to
“31.”
[
5. Press the ENT key to store the selected level.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
Page 60
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
12.2 TIME OFFSET
This selection sets the time offset between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
[ ]
by pressing the F key followed by the 6 NAV key.
[ (
)]
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Time Set” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select time off-
set from UTC. See illustration below to find your off-
set time from UTC. If “0:00” is assigned, the time is
the same as UTC (Universal Time Coordinated or
GMT Greenwich Mean Time).
[
5. Press the ENT key to store the time offset.
]
[
6. To exit this menu and return to radio operation mode press the 16/9 key.
]
OFFSET TIME TABLE
GX3500S
Page 61
Download from Www.Somanuals.com. All Manuals Search And Download.
12.3 TIME LOCATION
This selection selects the time display between local time and UTC (time GPS
sends to radio). Time is displayed when GPS position (LAT/LON) is displayed
[ ]
by pressing the F key followed by the 6 NAV key.
[ (
)]
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Time Disp.” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select “UTC” or
“Local.”
5. Press the ENT key to store the selected setting.
6. To exit this menu and return to radio operation mode
[
]
[
press the 16/9 key.
]
n the local time mode, the display shows the time by the 12-hour system. Mean-
while, the display shows the time by the 24-hour system in the UTC mode.
(
)
(
)
“LOCAL” mode
“UTC” mode
(
)
12.4 TRUE MAGNETIC CHANGE NAV display
This selection allows customizing the GPS COG (Course Over Ground) dis-
played on the LCD to be in True or Magnetic.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Magnetic” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select “On” (rep-
resenting “Magnetic”) or “Off” (representing “True”).
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
Page 62
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
12.5 PRIORITY CHANNEL SET
Allows selection of the priority channel.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Priority CH” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select the chan-
nel to be a priority.
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
12.6 SCAN TYPE
This selection selects the scan mode between “Memory Scan” and “Priority
Scan.”
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “SCAN Type” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select “Prior-
ity” or “Memory.”
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
GX3500S
Page 63
Download from Www.Somanuals.com. All Manuals Search And Download.
12.7 SCAN RESUME TIME
This selection is used to select the time the GX3500S waits after a transmis-
sion ends before starting scanning.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “SCAN Resume” in
the “Radio Setup” menu with the CHANNEL selec-
tor knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select the de-
sired resume time. The resume time can be set to
“1sec,” “2sec,” “3sec,” or “Off.” In the “Off” selec-
tion, the scanner will resume after the other station
stops transmitting (carrier drops).
[
]
5. Press the ENT key to store the selected setting.
6. To exit this menu and return to radio operation mode press the 16/9 key.
[
]
(
12.8 KEY BEEP ON/OFF
This selection allows the beep tone when a key is pressed to be turned off.
)
[
(
)]
1. Press and hold down the CALL MENU key until
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Key Beep” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select “On” or
“Off.”
5. Press the ENT key to set the key beep condition.
6. To exit this menu and return to radio operation mode
[
]
[
press the 16/9 key.
]
NOTE
Emergency alarm and beeps for DSC operation cannot be turned OFF.
Page 64
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
12.9 WX ALERT
This selection allows the radios NOAA Weather alert to be turned off. Default
setting is ON.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “WX Alert” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select the de-
sired WX alert mode. The WX alert mode can be set
to “On WX,” “On SCAN,” “On SCAN/WX,” or “Off.”
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
GX3500S
Page 65
Download from Www.Somanuals.com. All Manuals Search And Download.
12.10 CHANNEL NAME CHANGE
This selection allows you to customize the name of a channel from the default
name.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “CH Name” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select the chan-
[
]
nel to be named, then press the ENT key.
5. Press the one of the Keypad keys to enter the first
letter of the channel name.
[ (
Example: Press the 2 MEM key repeatedly to toggle
)]
among the seven available charactors associated
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
with that key: A
B
C
a
b
c
2.
[
]
6. Press the ENT key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
[
do not use all twelve character, press the ENT key
]
to move to the next space. To clear the previous let-
[
(
)]
ter, press the H/L NAV key.
[
]
8. Press and hold the ENT key to enter the name and exit from the “CH
Name” menu. The LCD will return to the “Radio Setup” menu.
9. If you want to enter the name of another channel, repeat steps 3 through 8.
[
10. To exit this menu and return to radio operation mode press the 16/9 key.
]
Page 66
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
12.11 NAMING THE RADIO OR RAM+ STATIONS
This selection allows you to provide the name to the radio and optional RAM+
Mic’s when connected.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appears.
[
]
2. Press the ENT key, then select “Unit Name” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
3. Press the ENT key.
]
4. Turn the CHANNEL selector knob to select the Unit
(Radio, RAM 1, or RAM2) to be named, then press
[
the ENT key.
]
5. Press the one of the Keypad keys to enter the first
letter of the unit name.
[ (
Example: Press the 2 MEM key repeatedly to toggle
)]
among the seven available charactors associated
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
with that key: 2
A
B
C
a
b
c.
[
]
6. Press the ENT key to enter the desired letter and
move the cursor one space to the right.
7. Repeat procedure until the name is complete. The
name can consist of up to twelve characters. If you
[
do not use all twelve character, press the ENT key
]
to move to the next space.
[
]
8. Press and hold the ENT key to enter the name and
exit from the “Unit Name” menu. The LCD will return to the “Radio Setup”
menu.
9. If you want to enter the name of another unit, repeat steps 3 through 8.
[
10. To exit this menu and return to radio operation mode press the 16/9 key.
]
GX3500S
Page 67
Download from Www.Somanuals.com. All Manuals Search And Download.
12.12 FOG ALERT TONE FREQUENCY
This selection allows you to select the Alert Tone Frequency for the PA/FOG
Operation. Available selections are “200 Hz” through “850 Hz” in 50 Hz steps.
The default Alert Tone Frequency is 400 Hz.
[
1. Press and hold down the CALL MENU key until
(
)]
“Radio Setup” menu appear.
[
]
2. Press the ENT key, then select “Fog Freq.” in the
“Radio Setup” menu with the CHANNEL selector
knob.
[
]
3. Press the ENT key.
4. Turn the CHANNEL selector knob to select desired
tone frequency.
[
5. Press the ENT key to store the selected setting.
]
6. To exit this menu and return to radio operation mode
[
press the 16/9 key.
]
Page 68
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
13 ENHANCED RAM+ MIC OPERATION
When the RAM+ microphone is connected to the GX3500S, most VHF, DSC,
setup menus and PA modes can be remotely operated. The RAM+ Mic sup-
plied with 23 feet (7 m) of routing cable and can be extended up to 70 feet (21
m) using three 23 feet extension cables model CT-100. The intercom operation
can be used between the RAM+ Mic and the transceiver.
13.1 RAM+ MIC CONTROLS
MEM
IC
WX
SCAN
DW
CALL
SET
NAV
16
9
(
)
SQUELCH CONTROL SQL
Activates the squelch adjusting mode.
Press this key to activate the squelch adjusting mode. Press the
[
]
[
]
microphone’s ꢀ or ꢁ key to adjust the squelch.
When this key is pressed and held down for 1 second or more, the squelch
is turned off.
(
VOLUME KEY VOL
)
Activates the volume adjusting mode.
Press this key to activate the volume adjusting mode. Press the
[
microphone’s ꢀ or ꢁ to adjust the volume.
]
[
]
GX3500S
Page 69
Download from Www.Somanuals.com. All Manuals Search And Download.
(
POWER SWITCH PWR
)
Press and hold down this key to turn to the transceiver and RAM+ Mic on
and off.
(
PTT Push-To-Talk SWITCH
)
Activates transmission.
[
]
H/L KEY
[
Toggles between high and low power. When the H/L key is pressed while
]
the transceiver is on channel 13 or 67, the power will temporarily switch
[
]
from LO to HI power until the PTT is released. The H/L key does not
function on transmit inhibited and low power only channels.
[
]( ) [ ](
ꢀ UP / ꢁ DOWN KEY
)
These keys are used to select channels, adjust the volume and squelch
level, and to choose the item selection of different functions (such as the
DSC operation). In many ways, these keys emulate the function of the
transceiver’s CHANNEL selector knob.
[
]
16/9 KEY
Immediately recalls channel 16 from any channel location. Holding down
[
this key recalls channel 9. Pressing the 16/9 key reverts to the previous
]
selected working channel.
Secondary use
Please see secondary use for the WX and MEM key.
[
]
[
]
KEY PAD
[
]
SCAN Key
1. Starts and stops scanning of programmed channels.
[
(
)]
[
(
)]
2. If held while the UP ꢀ or DOWN ꢁ key on the microphone are
pressed, the radio will show the channels programmed in scan
memory. This function will not work if the unit is scanning.
NOTE: The priority channel by default is Channel 16, however the
priority channel can be changed. To select a different priority channel
refer to section “12.6 SCAN TYPE.”
[
]
CALL/SET Key
The [CALL/SET] key functions as the enter key.
Secondary use
[
Press the CALL/SET key to access the DSC OPERATION menu.
]
[
Press and hold the CALL/SET key to access the SETUP menu.
]
Page 70
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
[
[
]
DW Key
Watches for a transmission on CH16 and another selected channel until
either signal is received. (Dual watch)
Secondary use
[
Press and hold DW key, intercom operation will operate between radio
]
and RAM+ Mic.
]
NAV Key
Press this key, when connected to the GPS receiver, the LCD displays
Position Data and Time from the GPS.
Secondary use
[
Press and hold NAV key to access PA/FOG function menu.
]
[
]
WX Key
Immediately recalls the previously selected US NOAA weather channel from
any channel location.
Secondary use
Holding down the 16/9 key while pressing the WX key switch the Chan-
nel Group.
[
]
[
]
NOTE: If position is displayed, this icon will be hidden.
[
]
DISTRESS KEY
Used to send a DSC Distress Call. To send the distress call:
1. Lift the red rubber cover.
2. Press and hold the Red button. The RAM+ display will count down (3-2-
1) and then transmit the Distress call.
3. When the distress signal is sent, Ch70 and “
” icon will appear on
the LCD. After the message has been sent, the radio and RAM+ will
sound a Distress Alarm.
4. The transceiver “shadow-watches” for a transmission on
CH16 or CH70 until an acknowledgment signal is re-
ceived. “DISTRESS” and “WAITING” will appear on the
LCD.
5. If an acknowledgement is received, select channel 16
and advise your distress situation.
6. If no acknowledgment is received, the distress call is
repeated in 4 minute intervals until an acknowledgment
is received.
7. When a DSC Distress acknowledgment is received, a
distress alarm sounds and channel 16 is automatically
selected. The LCD shows the MMSI of the ship responding to your dis-
tress.
GX3500S
Page 71
Download from Www.Somanuals.com. All Manuals Search And Download.
RECEIVED ACK: acknowledgment signal is received.
RECEIVED RLY: relay signal is received from another vessel or coast
station.
8. To cancel the DSC distress alarm signal from the speaker, press any
key.
13.2 INTERCOM OPERATION
13.2.1 Communication
[
1. Press and hold the DW key while in the “RADIO” mode, the mode is
]
changed to “INTERCOM” mode.
2. If your GX3500S is equipped with two RAM+ Mic, select the companion you
[
wish to communicate (RADIO, RAM, or ALL) with the ꢀ / ꢁ key, then
] [
]
[
press the CALL/SET key.
]
3. When the “INTERCOM” operation is activated, “IC” is dis-
played on the RAM+ Mic and “INTERCOM” is displayed on
the GX3500S.
4. Press the PTT switch, “TALK” is displayed.
NOTE: Awarning beep is emitted when the RAM+ Mic PTT switch is pressed
while the transceiver microphone’s PTT
switch is pressed.
5. Speak slowly and clearly into the mi-
crophone, hold the microphone about
1/2 inch away from your mouth.
(
)
RAM+ Mic’s PTT switch is pressed
6. When finished, release the PTT switch.
[
7. Press the DW key again the mode will
]
revert to “RADIO” mode.
(
)
GX3500S’s PTT switch is pressed
13.2.2 Calling
[
Hold down the DW key for 1 second or more, when the “INTERCOM” opera-
]
tion is activated. A calling beep is emitted twice from the transceiver speaker.
Page 72
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
13.3 PA/FOG OPERATION
The RAM+ is capable of controlling the 30W Public address, 4 fog horns, bells
and whistles.
13.3.1 Operating the PA / Hailer
[
1. Press and hold the NAV key then select PA with the ꢀ or
]
[ ]
[
]
ꢁ key.
[
2. Press the CALL/SET key.
]
3. Press the PTT switch and speak into the microphone.
4. To turn up the PA Volume, press the PTT switch and press
[
the ꢀ or ꢁ keys to adjust the Audio output level. The
]
[
]
level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
[
press the VOL Key, then press the ꢀ or ꢁ key to the
]
[
]
[
]
desired listen back volume.
[
] [
]
To exit from the PA Hailer mode, press the CALL/SET , 16/9 ,
[
or WX key.
]
13.3.2 Operating the FOG Horn
The GX3500S is capable of sending Underway, Stop, Sail, Tow, Horn, Siren,
Aground and Anchor signals.
[
]
1. Press and hold the NAV key then select FOG with the ꢀ
[ ]
[
or ꢁ key.
]
[
2. Press the CALL/SET key.
]
3. Select the one of the eight functions described above with
[
]
[
]
[
]
the ꢀ or ꢁ key and press the CALL/SET key.
4. On the “Horn” and “Siren” modes, press the PTT switch to
activate the tone through the HAIL/PA speaker.
[
]
Press the ꢀ or ꢁ keys to adjust the Audio output level.
[
]
The level can be set from 0 to 30W.
5. To adjust the listen back volume, (while in listenback mode)
[
press the VOL Key, then press the ꢀ or ꢁ key to the
]
[
]
[
]
desired listen back volume.
[
To exit from the FOG HORN mode, press the 16/9 , WX , or
] [
]
[
]
CALL/SET key.
GX3500S
Page 73
Download from Www.Somanuals.com. All Manuals Search And Download.
13.4 DSC/RADIO SETUP MODE
The RAM+ can access the DSC / RADIO setup menu (refer to section “10
DIGITAL SELECTIVE CALLING” and section “12 RADIO SETUP” for details).
The LAMP, CONTRAST, and KEY BEEP menu item accessed from the RAM+
only controls the RAM+’s display and speaker.
DSC/RADIO Setup mode from the RAM+:
[
]
1. Press and hold down the CALL/SET key until “RADIO SETUP” menu ap-
pears.
[
] [
]
2. Press the ꢀ / ꢁ key to select “RADIO SETUP” or “DSC SETUP” menu.
[
3. Press the CALL/SET key, then select the menu item you wish to work on
]
[
by pressing the ꢀ / ꢁ key.
] [
]
[
]
4. Press the CALL/SET key.
[
5. Press the ꢀ / ꢁ key to change the value or condition for the menu item,
] [
]
then press the [CALL/SET] key to save the new setting.
[
[
] [
]
]
6. Press the ꢀ / ꢁ key to select “EXIT,” then press the CALL/SET key to
return to the normal operation.
RADIO SETUP-menu
DSC SETUP-menu
Page 74
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
14 MAINTENANCE
The inherent quality of the solid-state components used in this transceiver will
provide many years of continuous use. Taking the following precautions will pre-
vent damage to the transceiver.
•
•
•
•
Keep the microphone connected or the jack covered at all times to prevent
corrosion of electrical contacts;
Never key the microphone unless an antenna or suitable dummy load is con-
nected to the transceiver.
Ensure that the supply voltage to the transceiver does not exceed 16 VDC or
fall below 11 VDC.
Use only STANDARD HORIZON-approved accessories and replacement parts.
In the unlikely event of serious problems, please contact your Dealer or our repair
facility. Address and phone numbers for this facility, as well as warranty informa-
tion, are contained in section “16 WARRANTY.”
14.1 REPLACEMENT PARTS
Occasionally an owner needs a replacement mounting bracket or knob.
These can be ordered from our Parts Department by writing or calling:
Marine Division of Vertex Standard
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
Telephone (714) 827-7600
Commonly requested parts, and their part numbers are listed below.
• Power Cord: T9023306
• VOL/SQL Knob: RA0542600
• Rotary Channel Knob: RA0569500
• Mounting Bracket: RA0544200A
• Mounting Bracket Knob: RA045910A
• Microphone Hanger: RA0458800
• Microphone Assembly: M3090118
• RAM+ Mic Routing Cable Assembly: S8101512
14.2 FACTORY SERVICE
In the unlikely event that the radio fails to perform or needs servicing, please con-
tact the following:
Standard Horizon
Attention Marine Repair Department
10900 Walker Street, Cypress, CA 90630
Telephone (800) 366-4566
An “RA” Return Authorization number is not necessary to send a product in for
service. Include a brief note describing the problem along with your name, return
address, phone number, and proof of purchase.
GX3500S
Page 75
Download from Www.Somanuals.com. All Manuals Search And Download.
14.3 TROUBLESHOOTING CHART
SYMPTOM
PROBABLE CAUSE REMEDY
Transceiver fails to No DC voltage to the a. Check the 12VDC battery connections and
power up.
transceiver, or blown
fuse.
the fuse.
b. The PWR key needs to be pressed and held
to turn the radio on.
Transceiver blows fuse Reversed power Check the power cable for DC voltage, or re-
when connected to wires.
power supply.
place the fuse (6A 250V).
Make sure the red wire is connected to the posi-
tive (+) battery post, and the black wire is con-
nected to the negative (-) battery post. If the
fuse still blows, contact your Dealer.
Popping or whining Engine noise.
noise from the speaker
while engine runs.
Reroute the DC power cables away from the
engine. Add noise suppressor on power cable.
Change to resistive spark plug wires and/or add
an alternator whine filter.
Sound is not emitted Accessory cable.
from the internal or ex-
ternal speaker.
Check the connections of the accessory cable
(Possible short circuit on the External speaker
cable WHITE/SHIELD).
Receiving station re- Antenna.
port low transmit
power, even with trans-
Have the antenna checked or test the trans-
ceiver with another antenna. If the problem per-
sists, contact your Dealer for servicing.
ceiver set to HI power.
“HI BATTERY” or “LO The power supply Confirm that the connected power supply volt-
BATTERY” message is voltage is too high or age is not 17 volts or lower than 10 volts. Con-
appeared when the too low.
power is turned on.
firm that the generator has not malfunctioned.
“PA ERROR” or “FOG Accessory cable.
ERROR” message is
shown when the PA/
FOG mode is acti-
vated.
Check the accessory cable connection (Pos-
sible short circuit on the PA speaker cable RED/
SHIELD).
Your position is not dis- Accessory cable.
played.
Check the accessory cable connection.
Some GPS use the battery ground line for
NMEA connection.
Setting of the GPS Check the output signal format of the GPS navi-
navigation receiver. gation receiver. This radio requires NMEA0183
format with GLL, RMB, GGA, or GNS sentence
as an output signal. If the GPS has a baud rate
setting make sure to select 4800 and parity to
NONE.
Page 76
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
15. CHANNEL ASSIGNMENTS
Tables on the following columns list the VHF Marine Channel assignments for
U.S.A. and International use. Below are listed some data about the charts.
1. VTS. Where indicated, these channels are part of the U.S. Coast Guard’s
Vessel Traffic System.
2. Alpha channel numbers, that is, channel numbers followed by the letter A
(such as Channel 07A) are simplex channels on the U.S.A. or Canadian
channel assignments whose counterparts in the International assignments
are duplex channels. International channels do not use “alpha” numbers. If
you call the Coast Guard on Channel 16, they will sometimes ask you to
“go to channel 22 Alpha.” This is a channel assigned to U.S.A, and Cana-
dian Coast Guards for handling distress and other calls. If your radio is set
for International operation you will go to Channel 22 instead of 22A, and
will not be able to communicate with the Coast Guard. To use Channel 22A,
your radio must be set for USA or Canada operation, usually by a U/I/C
(USA/International/Canada) control or combination of controls. Channel 22
(without an “A”) is an International duplex channel for port operations.
Some radios indicate an “A” adjacent to the alpha channels on the display;
on others “alpha” is not indicated but the proper channel is selected based
on the U/I/C setting.
3. Bridge-to-Bridge channels (for example, Channel 13) are for use by bridge
operators on intercoastal waterways and rivers. It is also used by marine
vessels in the vicinity of these bridges for navigation and for communicat-
ing with the bridge operators. Note that a limit of 1 Watt is specified for
these channels. See page 27 for additional information.
4. The S/D column on the chart indicates either S (simplex) or D (duplex).
Simplex means transmitting and receiving on the same frequency. Only
one party at a time can talk, unlike a telephone. Be sure to say “over” and
release your microphone push-to-talk switch at the end of each transmis-
sion. Duplex operation involves the use of one frequency for transmitting
and a separate frequency for receiving. On channels specified as duplex
on the charts, correct mode of operation is established automatically by
your radio when you select a channel; you cannot change the mode. And
you still must release the push-to-talk switch after each transmission in
order to listen to the radio.
5. Channels normally used by recreational boaters are those that include the
term “non-commercial” in the Channel Use column of the chart. Some of
these are shared with other users and some are used only in certain geo-
graphic regions.
GX3500S
Page 77
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Marine vessels equipped with VHF radios are required to monitor
Channel 16.
VHF MARINE CHANNEL CHART
CH
01
U
C
X
I
X
S/D
D
TX
156.050 160.650 Public Correspondence (Marine Operator)
RX
CHANNEL USE
01A
X
S
156.050
Port Operation and Commercial.
VTS in selected areas
02
03
03A
04
X
X
X
X
D
D
S
D
156.100 160.700 Public Correspondence (Marine Operator)
156.150 160.750 Public Correspondence (Marine Operator)
X
156.150
US Government only, Coast Guard
X
156.200 160.800 Public Correspondence (Marine Operator),
Port operation, ship movement
04A
05
X
S
D
156.200
Pacific coast: Coast Guard, East Coast:
Commercial fishing
X
156.250 160.850 Public Correspondence (Marine Operator),
Port operation, ship movement
05A
06
07
X
X
X
X
S
S
D
156.250
156.300
Port operation. VTS in Seattle
Inter-ship Sefety
X
X
156.350 160.950 Public Correspondence (Marine Operator),
Port operation, ship movement
07A
08
09
X
X
X
X
X
X
S
S
S
156.350
156.400
156.450
Commercial
Commercial (Inter-ship only)
Boater Calling channel, Commercial &
Non-commercial (Recreational)
Commercial
Commercial. VTS in selected areas.
Port operation. VTS in selected areas.
Inter-ship Navigation Safety (Bridge-to-bridge)
Port operation. VTS in selected areas.
X
X
10
11
12
13
14
15
15
16
17
18
18A
19
19A
19A
20
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
S
S
S
S
S
S
S
S
S
D
S
D
S
S
D
156.500
156.550
156.600
156.650
156.700
- - -
156.750
156.800
156.850
156.750 Environmental (Receive only)
X
X
X
X
X
X
X
Commercial, non-commercial, ship movement (1 W)
International Distress, Safety and Calling
State Controlled (1 W)
X
X
156.900 161.500 Port operation, ship movement
156.900 Commercial
156.950 161.550 Port operation, ship movement
X
X
X
X
X
156.950
156.950
US: Commercial
Coast Guard
X
X
X
X
157.000 161.600 Canadian Coast Guard Only,
International: port operations and shipment
Port operation
157.050 161.650 Port operation, ship movement
20A
21
21A
22
S
D
S
D
S
157.000
X
X
X
X
157.050
157.100 161.700 Port operation, ship movement
U.S. Government Only, Canadian Coast Guard
22A
X
X
157.100
US and Canadian Coast Guard Liaison and
Maritime Safety Information Broadcasts announced
on channel 16
Page 78
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
VHF MARINE CHANNEL CHART
TX RX CHANNEL USE
157.150 161.750 Public Correspondence (Marine Operator)
157.150 U.S. Government Only
157.200 161.800 Public Correspondence (Marine Operator)
157.250 161.850 Public Correspondence (Marine Operator)
157.300 161.900 Public Correspondence (Marine Operator)
157.350 161.950 Public Correspondence (Marine Operator)
157.400 162.000 Public Correspondence (Marine Operator)
156.025 160.625 Public Correspondence (Marine Operator)
CH
23
23A
24
25
26
27
28
U
C
X
I
X
S/D
D
S
D
D
D
D
D
D
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
60
61
D
156.075 160.675 Public Correspondence (Marine Operator),
Port operation, ship movement
61A
62
X
X
S
D
S
D
S
D
S
D
156.075
U.S. Government Only, Canadian Coast Guard-
Pacific Coast, Commercial Fishing-East Coast
X
X
X
156.125 160.725 Public Correspondence (Marine Operator),
Port operation, ship movement
62A
63
X
156.125
Public Coast: Coast Guard;
East Coast: commercial fishing only
156.175 160.775 Public Correspondence (Marine Operator),
Port operation, ship movement
63A
64
X
X
X
156.175
Port Operation and Commercial.
VTS in selected areas.
X
156.225 160.825 Public Correspondence (Marine Operator),
Port operation, ship movement
64A
65
X
156.225
U.S. Government Only,
Canadian Commercial Fishing
X
X
X
156.275 160.875 Public Correspondence (Marine Operator),
Port operation, ship movement
65A
66
X
S
D
156.275
Port Opeations
156.325 160.925 Public Correspondence (Marine Operator),
Port operation, ship movement
66A
67
X
X
X
X
S
S
156.325
156.375
Port Operations
US: Commercial. Used for Bridge-to-bridge com
muni-cations in lower Mississippi River. Inter-ship
only,
Canada: Commercial fishing, S&R
Non-commercial (Recreational)
US: Non-commercial (Recreational),
Canada: Commercial fishing only,
International: Inter-ship, Port opertions and Ship
movement
68
69
X
X
X
X
X
X
S
S
156.425
156.475
70
71
X
X
X
X
X
X
S
S
156.525
156.575
Digital selective calling (voice communications not
allowed)
US, Canada: Non-commercial (Recreational),
International: Port opertions and Ship movement
Non-commercial (Inter-ship only)
72
73
X
X
X
X
X
X
S
S
156.625
156.675
US: Port Operations,
Canada: Commercial fish ing only,
International: Inter-ship, Port opertions and Ship
movement
74
X
X
X
S
156.725
US: Port Operations,
Canada: Commercial fishing only,
International: Inter-ship, Port opertions and Ship
movement
GX3500S
Page 79
Download from Www.Somanuals.com. All Manuals Search And Download.
VHF MARINE CHANNEL CHART
RX
CH
75
76
77
77
78
U
X
X
X
C
I
S/D
S
S
S
S
TX
CHANNEL USE
156.775
Port Operations (Inter-ship only) (1W)
Port Operations (Inter-ship only) (1W)
Port Operations (Inter-ship only) (1W)
Port Operations (Inter-ship only)
156.825
156.875
156.875
X
X
X
D
156.925 161.525 Public Correspondence (Marine Operator),
Port operation, ship-movement
78A
79
79A
80
80A
81
81A
X
X
X
X
X
X
X
X
S
D
S
D
S
D
S
156.925
156.975 161.575 Port operation and Ship movement
156.975 Commercial
157.025 161.625 Port operation, ship movement
157.025 Commercial
157.075 161.675 Port operation, ship movement
Non-commercial (Recreational)
X
X
X
157.075
U.S. Government Only -
Environmental protection operations.
82
X
X
D
157.125 161.725 Public Correspondence (Marine Operator),
Port operation, ship movement
82A
X
X
X
S
157.125
U.S. Government Only,
Canadian Coast Guard Only
83
83A
X
X
D
S
157.175 161.775 Canadian Coast Guard Only
157.175
U.S. Government Only,
Canadian Coast Guard Only
83
84
85
86
87
88
X
X
X
X
X
X
X
X
X
X
X
X
D
D
D
D
D
D
S
D
D
D
D
D
D
D
D
D
D
157.175 161.775 Public Correspondence (Marine Operator)
157.225 161.825 Public Correspondence (Marine Operator)
157.275 161.875 Public Correspondence (Marine Operator)
157.325 161.925 Public Correspondence (Marine Operator)
157.375 161.975 Public Correspondence (Marine Operator)
157.425 162.025 Public Correspondence (ship-to-coast)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
88A
WX01
WX02
WX03
WX04
WX05
WX06
WX07
WX08
WX09
WX10
157.425
Commercial, Inter-ship Only
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
- - -
162.550 Weather (receive only)
162.400 Weather (receive only)
162.475 Weather (receive only)
162.425 Weather (receive only)
162.450 Weather (receive only)
162.500 Weather (receive only)
162.525 Weather (receive only)
161.650 Weather (receive only)
161.775 Weather (receive only)
163.275 Weather (receive only)
The above BOLD channels are not for use of the general public in U.S. waters, unless proper authorization is
given.
Page 80
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
Points of communica-
tion (Intership and be-
tween coast and ship
unless otherwise
iandicated)
Points of communica-
tion (Intership and be-
tween coast and ship
unless otherwise
iandicated)
Carrier frequency
Carrier frequency
(
)
(
)
MHz
MHz
Channel
designator
Channel
designator
Coast
transmit
Coast
transmit
Ship
transmit
Ship
transmit
Port Operations
Noncommercial
01A1
63A1
052
65A
66A
123
73
156.050 156.050
6817
0916
69
71
72
78A
79A
80A
6714
156.425 156.425
156.450 156.450
156.475 156.475
156.575 156.575
156.625 ........ Intership only.
156.925 156.925
156.975 156.975 Great Lakes only.
157.025 157.025 Do.
156.375 ....... Internship only.
156.175 156.175
156.250 156.250
156.275 156.275
156.325 156.325
156.600 156.600
156.675 156.675
156.700 156.700
156.725 156.725
156.875
143
74
774
Intership only.
Intership only.
Distress, Safety and Calling
156.800 156.800 EPRIB
Intership Safety
20A12 157.000
16
06
Navigational (Bridge-to-Bridge)5
136
677
156.650 156.650
156.375 156.375
156.300 ........ a. Intership, or
b. For SAR: Ship
and aircraft for the
Commercial
01A1
63A1
07A
677
08
09
156.050 156.050
156.175 156.175
156.350 156.350
U.S. Coast Guard.
Environmental
1513
........ 156.750 Coast to ship only.
Maritime Control
156.375
Intership only.
156.400 ........ Do.
156.450 156.450
156.500 156.500
156.550 156.550
156.900 156.900
156.950 156.950
156.975 156.975
157.025 157.025
157.425 ........ Intership only.
156.625 ........ Internship only.
179,10
156.850 156.850
10
113
Liaison, U.S. Coast Guard
18A
19A
79A
80A
88A8
7214
22A11 157.100 157.100 Ship, aircraft, and
coast stations of
the U.S. Coast
Guard and at
Lake Mead, Nev.,
ship and coast
stations of the
National Park
Service, U.S.
Department of the
Interior.
Digital Selective Calling
7015
156.525 156.525
1: 156.050 MHz and 156.175 MHz are available for port operations and commercial com-
munications purposes when used only within the U.S. Coast Guard designated Vessel
Traffic Services (VTS) area of New Orleans, on the lower Mississippi River from the
various pass entrances in the Gulf of Mexico to Devil’s Swamp Light at River Mile 242.4
above head of passes near Baton Rouge.
2: 156.250 MHz is available for port operations communications use only within the U.S.
Coast Guard designated VTS radio protection areas of New Orleans and Houston de-
scribed in Sec. 80.383. 156.250 MHz is available for intership port operations communi-
cations used only within the area of Los Angeles and Long Beach harbors, within a 25-
nautical mile radius of Point Fermin, California.
3: 156.550 MHz, 156.600 MHz and 156.700 MHz are available in the U.S. Coast Guard
designated port areas only for VTS communications and in the Great Lakes available
primarily for communications relating to the movement of ships in sectors designated by
the St. Lawrence Seaway Development Corporation or the U.S. Coast Guard. The use of
these frequencies outside VTS and ship movement sector protected areas is permitted
provided they cause no interference to VTS and ship movement communications in thier
respective designated sectors.
GX3500S
Page 81
Download from Www.Somanuals.com. All Manuals Search And Download.
4: Use of 156.875 MHz is limited to communications with pilots regarding the movement
and docking of ships. Normal output power must not exceed 1 watt.
5: 156.375 MHz and 156.650 MHz are available primarily for intership navigational commu-
nications. These frequencies are available between coast and ship on a secondary basis
when used on or in the vicinity of locks or drawbridges. Normal output power must not
exceed 1 watt. Maximum output power must not exceed 10 watts for coast stations or 25
watts for ship stations.
6: On the Great Lakes, in addition to bridge-to-bridge communications, 156.650 MHz is
available for vessel control purposes in established vessel traffic systems. 156.650 MHz
is not available for use in the Mississippi River from South Pass Lighted Whistle Buoy “2”
and Southwest Pass entrance Midchannel Lighted Whistle Buoy to mile 242.4 above
Head of Passes near Baton Rouge. Additionally it is not available for use in the Missis-
sippi River-Gulf Outlet, the Mississippi River-Gulf Outlet Canal, and the Inner Harbor
Navigational Canal, except to aid the transition from these areas.
7: Use of 156.375 MHz is available for navigational communications only in the Mississippi
River from South Pass Lighted Whistle Buoy “2” and Southwest Pass entrance Mid-
channel Lighted Whistle Buoy to mile 242.4 above head of Passes near Baton Rouge,
and in addition over the full length of the Mississippi River-Gulf Outlet Canal from en-
trance to its junction with the Inner Harbor Navigation Canal, and over the ull length of
the Inner Harbor Navigation Canal from its junction with the Mississippi River to its entry
to Lake Pontchartrain at the New Seabrook vehicular bridge.
8: Within 120 km (75 miles) of the United States/Canada border, in the area of the Puget
Sound and the Strait of Juan de Fuca and its approaches, 157.425 MHz is half of the
duplex pair designated as Channel 88. In this area, Channel 88 is available to ship
stations for communications with public coast stations only. More than 120 km (75 miles)
from the United States/Canada border in the area of the Puget Sound and the Strait of
Juan de Fuca, its approaches, the Great Lakes, and the St. Lawrence Seaway, 157.425
MHz is available for intership and commercial communications. Outside Puget Sound
area and its approaches and the Great Lakes, 157.425 MHz is also available for commu-
nications between commercial fishing vessels and associated aircraft while engaged in
commercial fishing activities.
9: When the frequency 156.850 MHz is authorized, it may be used additionally for search
and rescue training exercises conducted by state or local governments.
10: The frequency 156.850 MHz is additionally available to coast stations on the Great Lakes
for transmission of scheduled Coded Marine Weather Forecasts (MAFOR), Great Lakes
Weather Broadcast (LAWEB) and nscheduled Notices to Mariners or Bulletins. F3C and
J3C emissions are permitted. Coast Stations on the Great Lakes must cease weather
broadcasts which cause interference to stations operating on 156.800 MHz until the
interference problem is resolved.
11: The frequency 157.100 MHz is authorized for search and rescue training exercises by
state or local government in conjunction with U.S. Coast Guard stations. Prior U.S. Coast
Guard approval is required. Use must cease immediately on U.S. Coast Guard request.
12: The duplex pair for channel 20 (157.000/161.600 MHz) may be used for ship to coast
station communications.
13: Available for assignment to coast stations, the use of which is in accord with an agreed
program, for the broadcast of information to ship stations concerning the environmental
conditions in which vessels operate, i.e., weather; sea conditions; time signals; notices
to mariners; and hazards to navigation.
14: Available only in the Puget Sound and the Strait of Juan de Fuca.
15: The frequency 156.525 MHz is to be used exclusively for distress, safety and calling
using digital selective calling techniques. No other uses are permitted.
16: The frequency 156.450 MHz is available for intership, ship and coast general purpose
calling by noncommercial vessels, such as recreational boats and private coast stations.
17: The frequency 156.425 MHz is assigned by rule to private coast stations in Alaska for
facsimile transmissions as well as voice communications.
Page 82
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
16. WARRANTY
Marine Products Limited Warranty
STANDARD HORIZON (a division of Vertex Standard) warrants, to the original
purchaser only, each new Marine Communications Product (“Product”) manu-
factured and/or supplied by STANDARD HORIZON against defects in materi-
als and workmanship under normal use and service for a period of time from
the date of purchase as follows:
Fixed Mount and Portable Transceivers
1 year - if purchased before 01/01/91
3 years - if purchased between 01/01/91 and 01/01/94
3 years Waterproof - if purchased after 01/01/94
Loud hailers
1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91
Associated Chargers
1 year - if purchased before 01/01/91
3 years - if purchased after 01/01/91
Associated Batteries - 1 year. Note: Batteries will be deemed deflective only if
storage capacity drops below 80% of rated capacity or if leakage develops.
Associated Accessories - 1 year. Includes: Microphones/Handsets, External
Speakers,Antennas, CarryingAccessories, Power Supplies, and Signaling Boards.
To receive warranty service, the purchaser must deliver the Product, transpor-
tation and insurance prepaid, to STANDARD HORIZON (a division of Vertex
Standard), Attention Marine repairs 10900 Walker Street, Cypress, CA 90630.
Include proof of purchase indicating model. serial number, and date of pur-
chase. STANDARD HORIZON will return the Product to the purchaser freight
prepaid. Products purchased prior to January 1, 1991 will bear the STANDARD
HORIZON warranty terms in effect prior to that date.
In the event of a defect, malfunction or failure of the Product during the war-
ranty period, STANDARD HORIZON’s liability for any breach of contract or any
breach of express or implied warranties in connection with the sale of Products
shall be limited solely to repair or replacement, at its option, of the Product or
part(s) therein which, upon examination by STANDARD HORIZON, appear to
be defective or not up to factory specifications. STANDARD HORIZON may, at
its option, repair or replace parts or subassemblies with new or reconditioned
parts and subassemblies. Parts thus repaired or replaced are warranted for the
balance of the original applicable warranty.
GX3500S
Page 83
Download from Www.Somanuals.com. All Manuals Search And Download.
STANDARD HORIZON will not warrant installation, maintenance or service of
the Products. In all instances, STANDARD HORIZON’s liability for damages shall
not exceed the purchase price of the defective Product.
This warranty only extends to Products sold within the 50 States of the United
States of America and the District of Columbia.
STANDARD HORIZON will pay all labor to repair the product and replacement
parts charges incurred in providing the warranty service except where purchaser
abuse or other qualifying exceptions exist. The purchaser must pay any trans-
portation expenses incurred in returning the Product to STANDARD HORIZON
for service.
This limited warranty does not extend to any Product which has been subjected
to misuse, neglect, accident, incorrect wiring by anyone other than STANDARD
HORIZON, improper installation, or subjected to use in violation of instructions
furnished by STANDARD HORIZON, nor does this warranty extend to Prod-
ucts on which the serial number has been removed, defaced, or changed. STAN-
DARD HORIZON cannot be responsible in any way for ancillary equipment not
furnished by STANDARD HORIZON which is attached to or used in connection
with STANDARD HORIZON’s Products, or for the operation of the Product with
any ancillary equipment, and all such equipment is expressly excluded from
this warranty. STANDARD HORIZON disclaims liability for range, coverage, or
operation of the Product and ancillary equipment as a whole under this war-
ranty. STANDARD HORIZON reserves the right to make changes or improve-
ments in Products, during subsequent production, without incurring the obliga-
tion to install such changes or improvements on previously manufactured Prod-
ucts.
The implied warranties which the law imposes on the sale of this Product are
expressly LIMITED, in duration, to the time period specified above. STANDARD
HORIZON shall not be liable under any circumstances for consequential dam-
ages resulting from the use and operation of this Product, or from the breach of
this LIMITED WARRANTY, any implied warranties, or any contract with STAN-
DARD HORIZON. IN CONNECTION WITH THE SALE OF ITS PRODUCTS,
STANDARD HORIZON MAKES NO WARRANTIES, EXPRESS OR IMPLIED
AS TO THE MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR-
POSE OR OTHERWISE, EXCEPT AS EXPRESSLY SET FORTH HEREIN.
Some states do not allow the exclusion or limitation of incidental or consequen-
tial damages, or limitation on how long an implied warranty lasts, so the above
limitations or exclusions may not apply. This warranty gives specific legal rights,
and there may be other rights which may vary from state to state.
Page 84
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
ONLY PRODUCTS SOLD ON OR AFTER JANUARY 1, 1991 ARE COVERED
UNDER THE TERMS OF THIS LIMITED WARRANTY.
ON-LINE WARRANTY REGISTRATION
THANK YOU for buying Marine Division of Vertex Standard products!
We are confident your new radio will serve your needs for many years!
Marine VHF. It should be noted that visiting the Web site from time to
time may be beneficial to you, as new products are released they will
appear on the STANDARD HORIZON Web site. Also a statement re-
garding product support should be added to the manual.
Product Support Inquiries
If you have any questions or comments regarding the use of the GX3500S,
you can visit the STANDARD HORIZON Web site to send an E-Mail or
contact the Product Support team at (714) 827-7600 ext 6300 M-F 7:00-
5:00PST.
In addition to the warranty, STANDARD HORIZON includes a lifetime “flat
rate” and “customer loyalty” programs to provide service after the warranty
period has expired. If you wish to obtain the flat rate price for out-of-war-
ranty repair, you must include the information on the Owner’s Record with
the unit when you return it to your Dealer or to STANDARD HORIZON.
Lifetime Flat Rate Service Program: For the original Owner only, for the
lifetime of the unit, STANDARD HORIZON will repair the unit to original
specifications.
Note: The flat rate amount is payable by the Owner only if STANDARD
HORIZON or the STANDARD HORIZON Dealer determines that a re-
pair is needed. After the repair, a 90-day warranty will be in effect from
the date of return of the unit to the Owner.
This service program is not available for equipment which has failed as a
result of neglect, accident, breakage, misuse, improper installation or
modification, or water damage (depending on the product).
GX3500S
Page 85
Download from Www.Somanuals.com. All Manuals Search And Download.
17 SPECIFICATIONS
Performance specifications are nominal, unless otherwise indicated, and are
subject to change without notice.
17.1 GENERAL
Channels ............................................................. All USA, International and Canadian
Input Voltage ....................................................................................... 13.8 VDC 20%
Current Drain
Standby ........................................................................................................... 0.5 A
Receive ........................................................................................................... 1.5 A
Transmit................................................................................... 5.0 A (Hi); 1.5 A (Lo)
Dimensions ........................................................... 3-9/16” H x 9-1/16” W x 5-29/32” D
(90 H x 230 W x 150 D mm)
Flush-Mount Dimensions ........................................ 2-27/32” H x 8-5/64” W x 5-1/8” D
(72 H x 205 W x 130 D mm)
Weight................................................................................................. 3.2 lbs (1.45 kg)
17.2 TRANSMITTER
Frequency Range ..................................................................156.025 to 157.425 MHz
RF Output ......................................................................................25 W (Hi); 1 W (Lo)
Conducted Spurious Emissions ................................................. 80 dB (Hi); 60 dB (Lo)
Audio Response ..............................................................within +1/-3 of a 6 dB/octave
pre-emphasis characteristic at 300 to 3000 Hz
Audio Distortion ...................................................................................................... 5 %
Modulation ..................................................................... 16K0G3E, for DSC 16K0G2B
Frequency Stability (-20°C to +50°C)............................................................ 0.0005%
FM Hum and Noise .............................................................................................. 50 dB
17.3 RECEIVER
Frequency Range ..................................................................156.050 to 163.275 MHz
Sensitivity
12 dB SINAD ............................................................................................... 0.25 µV
12 dB SINAD (70 CH Receiver) ..................................................................0.30 µV
Squelch Sensitivity (Threshold)...................................................................0.13 µV
Modulation Acceptance Bandwidth ................................................................. 7.5 kHz
Selectivity
Spurious and Image Rejection ................................................... better than -70 dB
Intermodulation and Rejection at 12 dB SINAD ......................... better than -70 dB
Audio Output ........................................................................................................4.5 W
Audio Response ............................................................within + 2/–8 of a 6 dB/octave
de-emphasis characteristic at 300 to 3000 Hz
Frequency Stability (-20°C to +50°C)........................................................... 0.0005 %
Channel Spacing ................................................................................................ 25 kHz
DSC Format ............................................................................................. RTCMSC101
NMEA Input/Output ........................................................................ Output - DSC, DSE
Input - GLL, GGA, RMC and GNS
Page 86
GX3500S
Download from Www.Somanuals.com. All Manuals Search And Download.
18 APPENDIX
FOG HORN TIMING CHART
The fog horn function sounds a horn repeatedly until the function is turned off.
TYPE
UNDERWAY
PATTERN
One 5-second blasts evey 120 seconds.
USAGE
Motor vessel underway and
making way.
Listen Back
120s
STOP
SAIL
Two 5-second blasts (separated by 2
seconds) evey 120 seconds.
Motor vessel underway but
stopped (not making way).
5s
5s
Listen Back
120s
2s
2s
One 5-second blasts followed by two 1-
second blasts (separated by 2 seconds)
evey 120 seconds.
Sailling vessel underway, fish-
ing vessel (underway or an-
chored), vessel not under
command, a vessel restricted
in her ability to maneuver (un-
derway or at anchor), or a
vessel towing or pushing an-
other ahead.
1s 1s
1s 1s
Listen Back
120s
2s 2s
2s 2s
TOW
One 5-second blasts followed by three 1-
second blasts (separated by 2 seconds)
evey 120 seconds.
Vessel under tow (manned).
1s 1s 1s
1s 1s 1s
Listen Back
2s 2s 2s
2s 2s 2s
120s
AGROUND
One 11-second rings evey 60 seconds.
Vessel is aground.
Listen Back
60s
ANCHOR
One 5-second rings evey 60 seconds.
Vessel is at anchor.
Listen Back
60s
GX3500S
Page 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright 2004
VERTEX STANDARD CO., LTD.
All rights reserved.
Marine Division of VERTEX STANDARD
US Headquarters
10900 Walker Street, Cypress, CA 90630, U.S.A.
No portion of this manual
may be reproduced
without the permission of
VERTEX STANDARD CO., LTD.
E M 0 0 6 N 2 0 0
0410p-0Y
Download from Www.Somanuals.com. All Manuals Search And Download.
|