Stamina Products Exercise Bike 15 0200C User Manual

Owner's Manual  
WARNING  
Exercise can present a health  
risk. Consult a physician  
before beginning any exercise  
program with this equipment.  
If you feel faint or dizzy,  
immediately discontinue use  
of this equipment. Serious  
bodily injury can occur if this  
equipment is not assembled  
and used correctly. Serious  
bodily injury can also occur if  
all instructions are not followed.  
Keep others and pets away  
from equipment when in use.  
Always make sure all bolts and  
nuts are securely tightened  
prior to each use. Follow all  
safety instructions in this  
manual.  
When calling for parts or  
service, please specify the  
following number:  
Model#: 15-0200C  
STAMINA PRODUCTS  
MADE IN CHINA  
CAUTION:  
Weight on this product should not exceed 250 lbs.  
Product May Vary Slightly  
From Pictured.  
This Product is Produced Exclusively by  
2040 N. Alliance, Springfield, MO 65803  
Customer Service  
1 (800) 375-7520  
2010, 05  
2010 Stamina Products, Inc.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CALL US FIRST  
Customer Service  
1(800)375-7520  
THANK YOU FOR PURCHASING THE  
STAMINA INTONE Folding Recumbent Bike  
To help you get started, we have pre-assembled most of your  
INTONE Folding Recumbent Bike at the factory with the exception  
of those few parts left unassembled for shipping purposes.  
Simply follow the few assembly instructions set forth in this manual.  
With regular workouts, you will be getting your body into shape  
and be on your way to achieving a happier and healthier lifestyle.  
Should you have any questions,  
please call our Customer Service Department toll-free number,  
1 (800) 375-7520  
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.  
Friday, 8:00 A.M. - 3:00 P.M., Central Time.  
TELEPHONE  
CUSTOMER SERVICE  
Tel: 1 (800) 375-7520  
FAX  
ONLINE  
CUSTOMER SERVICE  
MAIL  
CUSTOMER SERVICE  
Fax: (417) 889-8064  
STAMINA PRODUCTS, INC.  
ATTN: Customer Service  
P.O. Box 1071  
Springfield, MO. 65801-1071  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
BEFORE YOU BEGIN  
Although Stamina constructs its products with the  
finest materials and uses the highest standards of  
manufacturing and quality control, there can  
sometimes be missing parts or incorrectly sized  
parts. If you have any questions or problems with  
Thank you for choosing the INTONE Folding  
Recumbent Bike. We take great pride in producing  
this quality product and hope it will provide many  
hours of quality exercise to make you feel better, look  
better, and enjoy life to its fullest.  
It's a proven fact that a regular exercise program the parts included with your INTONE Folding  
can improve your physical and mental health. Too Recumbent Bike, please do not return the product.  
often, our busy lifestyles limit our time and opportunity Contact us FIRST!  
If a part is missing or defective, please call us toll  
free at 1-800-375-7520 (in the U.S.). Our Customer  
Service Staff is available to assist you from 7:30A.M.  
to 5:00 P.M. (Central Time) Monday through Thursday  
and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.  
If you would like to contact us online, go to our  
Customer Service section.  
to exercise. The INTONE Folding Recumbent  
Bike provides a convenient and simple method to  
begin your assault on getting your body in shape and  
achieving a happier and healthier lifestyle.  
Before reading further, please review the drawing  
below and familiarize yourself with the parts that are  
labeled.  
Read this manual carefully before using the  
Be sure to have the name and model number of the  
product available when you contact us.  
INTONE Folding Recumbent Bike.  
Seat  
Back Cushion  
Back Support  
Adjustment Knob  
Tension Knob  
Handrail  
Seat Frame  
Main Frame  
Rear Frame  
Meter  
Left Pedal  
Left Cover  
Right  
Cover  
Front Stabilizer  
Leveling Cap  
Crank  
Rear Stabilizer  
Right Pedal  
Endcap  
Moving Wheels  
THE FOLLOWING TOOL IS INCLUDED FOR ASSEMBLY :  
Combination Wrench  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
HARDWARE IDENTIFICATION CHART  
This chart is provided to help identify the hardware used in the assembly process. Place the washers or the  
ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to check the  
length of the bolts and screws.  
3/16"  
1/4"  
1
5/16"  
3/8"  
1/2  
1/2"  
INCHES  
0
0
1/2  
1/2  
2
3
1/2  
4
1/2  
5
1/2  
6
in.  
mm.  
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150  
length  
MILLIMETERS  
6
8
10  
12  
NOTICE: The length of all bolts and screws, except those with flat heads,  
is measured from below the head to the end of the bolt or screw.  
Flat head bolts and screws are measured from the top of the  
head to the end of the bolt or screw.  
length  
After unpacking the unit, open the hardware bag and make sure that you have all the following items.  
Some hardware may be already attached to the part.  
Part No. and Description  
Qty  
56  
57  
Carriage Bolt (M8 x 1.25 x 60mm)  
Carriage Bolt (M8 x 1.25 x 85mm)  
4
1
60  
Screw, Round Head (M5 x 0.8 x 10mm)  
2
64  
65  
Bolt, Hex Head (M8 x 1.25 x 20mm)  
Bolt, Hex Head (M8 x 1.25 x 40mm)  
4
2
69  
Acorn Nut (M8 x 1.25)  
4
74  
75  
Arc Washer (M8)  
Washer (M8)  
6
5
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all  
packing materials from your area and place them back into the box. Do not dispose of the packing materials  
until assembly is completed. Read each step carefully before beginning. If you are missing a part please call  
our toll-free number for assistance 1-800-375-7520 or e-mail us at [email protected].  
Nylock Nut(M8)  
Plastic Washer  
Fixing Tube  
R
NOTE: Remove the FIXING TUBES, WASHERS, andNUTS from MAIN FRAME(1) and REAR FRAME(2)  
before any assembly. These parts are only for packing, do not dispose of the packing materials  
until assembly is completed.  
STEP 1  
The FRONT STABILIZER(4) has two MOVING WHEELS(48) with an "R" decal on one end. Attach the  
FRONT STABILIZER(4) to the MAIN FRAME(1) with the wheels facing front and the "R" decal at the right  
side as shown in the illustration. Secure with the CARRIAGE BOLTS(M8x1.25x60mm)(56), ARC  
WASHERS(M8)(74), and ACORN NUTS(M8x1.25)(69).  
STEP 2  
Attach the REAR STABILIZER(3) to the REAR FRAME(2) with CARRIAGE BOLTS(M8x1.25x60mm)(56),  
ARC WASHERS(M8)(74), and ACORN NUTS(M8x1.25)(69).  
NOTE:  
You can adjust the LEVELING CAPS(50) on the REAR STABILIZER(3) to keep the INTONE  
Folding Recumbent Bike stable.  
STEP 3  
Store the PULL PIN(47) by inserting the pin into the hole in the REAR FRAME(2).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
Peg  
STEP 4  
Attach the SEAT(43) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x20mm)(64) and WASHERS(M8)  
(75). Pull the ADJUSTMENT KNOB(41), then insert the SEAT FRAME(5) into the MAIN FRAME(1) and  
secure with the ADJUSTMENT KNOB(41).  
NOTE: 1.  
It may be necessary to unscrew the ADJUSTMENT KNOB(41) slightly to insert the SEAT FRAME(5).  
Make sure that the pin on the ADJUSTMENT KNOB(41) is inserted into one of the holes in the  
SEAT FRAME(5).  
2.  
3.  
The ADJUSTMENT KNOB(41) should be screwed in tight to make the SEAT FRAME(5) fit securely  
in the MAIN FRAME(1).  
STEP 5  
Attach the BACK SUPPORT(6) to the SEAT FRAME(5) by sliding the slots in the end of the BACK  
SUPPORT(6) onto the pegs on the SEAT FRAME(5) and securing with CARRIAGE BOLT(M8x1.25x85mm)  
(57), SPACER(80) ,WASHER(M8)(75), and the LOCKING KNOB(45).  
STEP 6  
Attach the HANDRAIL(7) to the SEAT FRAME(5) with HEX BOLTS(M8x1.25x40mm)(65) and ARC  
WASHERS(M8)(74).  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
ASSEMBLY INSTRUCTIONS  
STEP 7  
The RIGHT PEDAL(40) has R stamped on the end of the pedal shaft. The RIGHT PEDAL(40) has  
right hand threads and is tightened by turning clockwise. The LEFT PEDAL(39) has L stamped on  
the end of the pedal shaft. The LEFT PEDAL(39) has left hand threads and is tightened by turning  
counter clockwise.  
NOTE:  
Thread the RIGHT PEDAL(40) onto the right side of the CRANK(8). Thread the LEFT PEDAL(39) onto the  
left side of the CRANK(8).  
STEP 8  
Refer to the illustration. Swing the METER BRACKET(31) up to a position where it can be seen while  
working out. NOTE: If necessary, loosen or tighten the HEX BOLT(M8x1.25x55mm)(66). The HEX  
BOLT(M8x1.25x55mm)(66) should be tight enough to secure and hold the METER(32) in place yet loose  
enough for the METER(32) to be adjusted.  
Install two AA batteries into the METER(32), two batteries included. See page 10 for detailed battery  
installation instructions. Run the connection wire on the METER(32) through the hole in the METER  
BRACKET(31). Then attach the METER(32) to the METER BRACKET(31) with ROUND HEAD  
SCREWS(M5x0.8x10mm)(60). Plug the SENSOR WIRE(33) into the connection wire of the METER(32).  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
SET UP INSTRUCTIONS  
Place the INTONE Folding Recumbent Bike in the area where it will be used. It is recommended that the  
INTONE Folding Recumbent Bike be placed on an equipment mat. The maximum operation dimensions  
of the INTONE Folding Recumbent Bike are approximately 42 1/4" long x 25 3/8" wide x 44 1/4" tall.  
(These dimensions may vary up to one inch.) An area 4 feet wide x 6 feet long is required for safe operation  
of the INTONE Folding Recumbent Bike. Make sure that adequate space is available for access to and  
passage around the INTONE Folding Recumbent Bike.  
LEVELING:  
Adjust the LEVELING CAPS(50) on the REAR STABILIZER(3) so that the INTONE Folding  
Recumbent Bike sits on the floor without rocking.  
MOVING: The INTONE Folding Recumbent Bike has a pair of MOVING WHEELS(48) on the FRONT  
STABILIZER(4). Fold the INTONE Folding Recumbent Bike. Grasp the HANDRAIL(7) and  
tip the INTONE Folding Recumbent Bike forward to move.  
Equipment Mat  
(not included)  
FUNCTION INSPECTION:  
Visually inspect the INTONE Folding Recumbent Bike to verify that assembly is as shown in the above  
illustration. Check the function of the INTONE Folding Recumbent Bike. Turn the crank slowly through  
one complete revolution to verify that the drive train functions properly. Adjust the TENSION KNOB(29) and  
verify that it functions properly.  
CAUTION:  
Locate and read the WARNING LABEL(77) on the INTONE Folding Recumbent Bike. Make  
sure that all users read the WARNING LABEL(77).  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONAL INSTRUCTIONS  
USING THE ELECTRONIC METER  
Pedal movement or press any button.  
POWER ON:  
POWER OFF:  
Automatic shut off after three minutes of inactivity.  
FUNCTION BUTTONS :  
MODE : Press and release to select the function to display on  
the screen.  
RESET : Press the button and hold it down for two seconds to  
reset all functions to zero.  
FUNCTIONS:  
SCAN: Automatically scans SPEED, DISTANCE, TIME, and CALORIE in sequence with a change  
every five seconds. Press and release the MODE button until the arrow on the display  
points to "SCAN".  
SPEED: Displays the current speed from zero to 999.9 miles per hour.  
DISTANCE: Displays distance from the time the meter is turned on to 999.9 miles.  
TIME: Displays the time from one second up to 99:59 minutes.  
CALORIE: Displays the calorie consumption from zero to 999.9 Kcal.  
The calorie readout is an estimate for an average user. It should be used only as a comparison  
between workouts on this unit.  
NOTE: The meter will shut off automatically after four minutes of inactivity. All function values will  
be kept. Push the RESET button to reset the functions to zero.  
AA Batteries  
HOW TO INSTALL AND REPLACE BATTERIES:  
1. Open the Battery Door on the back of the meter.  
2. The meter operates with two AA batteries, included. Refer to the  
illustration to install or replace the batteries.  
NOTE:  
1. Do not mix a new battery with an old battery.  
2. Use the same type of battery. Do not mix an alkaline battery with  
another type of battery.  
3. Rechargeable batteries are not recommended.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATIONAL INSTRUCTIONS  
SEAT ADJUSTMENT  
Proper seat adjustment is important.  
1. Turn the ADJUSTMENT KNOB(41) to loosen, then pull  
the ADJUSTMENT KNOB(41) to release the pin. Slide  
the SEAT FRAME(5) until the SEAT(43) is at the proper  
height. Release the ADJUSTMENT KNOB(41) making  
sure the pin catches in one of the holes of the SEAT  
FRAME(5) and tighten the ADJUSTMENT KNOB(41).  
2. Sit on the seat and place your feet on the pedals. You  
should be able to move through a complete pedal stroke  
without locking your knees or shifting your hips on the  
seat. The seat is too close to the pedals if you have more  
than a slight bend in your knees at the bottom of the pedal  
stroke. The seat is too far from the pedals if you have to  
completely straighten your knees at the bottom of the  
pedal stroke. Refer to the illustration.  
CAUTION:  
1. Do not attempt to adjust the seat while you are on the  
INTONE Folding Recumbent Bike.  
2. Always tighten the ADJUSTMENT KNOB(41) after  
adjusting the seat to a new position.  
LOAD ADJUSTMENT  
To increase the load, turn the TENSION KNOB(29) clockwise.  
To decrease the load, turn the TENSION KNOB(29) counterclockwise.  
MAINTENANCE  
The safety and integrity designed into the INTONE Folding Recumbent Bike can only be maintained  
when the INTONE Folding Recumbent Bike is regularly examined for damage and wear. Special attention  
should be given to the following:  
1. Adjust the TENSION KNOB(29) and verify that the Magnetic System provides tension. The Magnetic  
System should provide many years of use.  
2. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.  
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten  
loose nuts and bolts.  
4. Worn or damaged components shall be replaced immediately or the INTONE Folding Recumbent  
Bike removed from service until repair is made.  
5. Only Stamina Products supplied components shall be used to maintain/repair the INTONE Folding  
Recumbent Bike.  
6. Keep your INTONE Folding Recumbent Bike clean by wiping with an absorbent cloth after use.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
STORAGE  
1. To store the INTONE Folding Recumbent Bike simply keep it in a clean dry place.  
2. The minimum folded dimensions of INTONE Folding Recumbent Bike are approximately 21 5/8" long  
x 25 3/8" wide x 42 1/4" tall. Please measure your INTONE Folding Recumbent Bike if exact dimensions  
are needed.  
3. The INTONE Folding Recumbent Bike has a pair of MOVING WHEELS(48) built into the FRONT  
STABILIZER(4). To move the bike, grasp the HANDRAIL(7), tip the INTONE Folding Recumbent  
Bike forward slowly, and roll into or out of the storage area.  
4. To avoid damage to the METER(32), remove the batteries before storing the INTONE Folding  
Recumbent Bike for one year or more.  
5. Follow the illustrated process below to fold the INTONE Folding Recumbent Bike.  
a. Loosen the LOCKING KNOB(45). Lift up the BACK SUPPORT(6) and fold it forward. Tighten the  
LOCKING KNOB(45) after folding.  
b. Remove the PULL PIN(47) from the REAR FRAME(2). Fold the REAR FRAME(2) close to the MAIN  
FRAME(1) and lock it in folded position with the PULL PIN(47).  
NOTE: Make sure the LOCKING PIN(47) goes through the holes on both sides of the REAR FRAME(2)  
and the ring on the MAIN FRAME(1).  
A
B
NOTE:  
When you fold the INTONE Folding Recumbent Bike without changing the seat height or the  
angle of the METER(32) as described in the steps above and as shown in illustration C, there is  
no need to readjust your seat height or meter angle before your next workout. You can fold your  
INTONE Folding Recumbent Bike smaller by following the next step.  
c. Loosen and pull the ADJUSTMENT KNOB(41), then lower the SEAT FRAME(5) to the lowest position.  
Lock the SEAT FRAME(5) into position by releasing and retightening the ADJUSTMENT KNOB(41).  
Swing the METER(32) down toward the floor as shown in illustration D.  
C
D
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONDITIONING GUIDELINES  
How you begin your exercise program depends on your physical condition. If you have been inactive for  
several years or are severely overweight, start slowly and increase your workout time gradually. Increase  
your workout intensity gradually by monitoring your heart rate while you exercise.  
Remember to follow these essentials:  
Have your doctor review your training and diet programs.  
Begin your training program slowly with realistic goals that have been set by you and your physician.  
Warm up before you exercise and cool down after you work out.  
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower  
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and  
build up to higher intensity as you become more aerobically fit.  
If you feel dizzy or lightheaded you should slow down or stop exercising.  
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic  
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise so  
you don't tire too quickly.  
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table below.  
For effective aerobic exercise, your heart rate should be maintained at a level between 60% and 90% of  
your maximum heart rate. If just starting an exercise program, work out at the low end of your target heart  
rate zone. As your aerobic capacity improves, gradually increase the intensity of your workout by increasing  
your heart rate.  
Measure your heart rate periodically during your workout by stopping the  
exercise but continuing to move your legs or walk around. Place two or three  
fingers on your wrist and take a six second heartbeat count. Multiply the results  
by ten to find your heart rate. For example, if your six second heartbeat count  
is 14, your heart rate is 140 beats per minute. A six second count is used  
wrist pulse  
because your heart rate will drop rapidly when you stop exercising. Adjust the  
intensity of your exercise until your heart rate is at the proper level.  
Target Heart Rate Zone Estimated by Age*  
Target Heart Rate Zone  
(55%-90% of Maximum Heart Rate)  
Average Maximum  
Heart Rate 100%  
Age  
20 years  
25 years  
30 years  
35 years  
40 years  
45 years  
50 years  
55 years  
60 years  
65 years  
70 years  
110-180 beats per minute  
107-175 beats per minute  
105-171 beats per minute  
102-166 beats per minute  
99-162 beats per minute  
97-157 beats per minute  
94-153 beats per minute  
91-148 beats per minute  
88-144 beats per minute  
85-139 beats per minute  
83-135 beats per minute  
200 beats per minute  
195 beats per minute  
190 beats per minute  
185 beats per minute  
180 beats per minute  
175 beats per minute  
170 beats per minute  
165 beats per minute  
160 beats per minute  
155 beats per minute  
150 beats per minute  
*For cardiorespiratory training benefits, theAmerican College of Sports Medicine recommends working  
out within a heart rate range of 55% to 90% of maximum heart rate. To predict the maximum heart  
rate, the following formula was used: 220 - Age = predicted maximum heart rate  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARM-UP and COOL-DOWN  
Warm-Up The purpose of warming up is to prepare your body for exercise and to minimize injuries. Warm  
up for two to five minutes before strength training or aerobic exercising. Perform activities that raise your  
heart rate and warm the working muscles. Activities may include brisk walking, jogging, jumping jacks, jump  
rope, and running in place  
Stretching Stretching while your muscles are warm after a proper warm-up and again after your strength  
or aerobic training session is very important. Muscles stretch more easily at these times because of their  
elevated temperature, which greatly reduces the risk of injury. Stretches should be held for 15 to 30 seconds.  
Do not bounce.  
Suggested Stretching Exercises  
Lower Body Stretch  
Place feet shoulder-width  
apart and lean forward.  
Keep this position for 30  
seconds using the body as a  
natural weight to stretch the  
backs of the legs.  
Floor Stretch  
While sitting on the floor,  
open the legs as wide as  
possible. Stretch the upper  
body toward the knee on the  
right leg by using your arms  
to pull your chest to your  
thighs. Hold this stretch 10  
to 30 seconds.  
DO NOT BOUNCE!  
When the pull on the back of  
the legs lessens, gradually  
try a lower position.  
DO NOT BOUNCE!  
Do this stretch 10 times.  
Repeat the stretch with the  
left leg.  
Bent Torso Pulls  
Bent Over Leg Stretch  
Stand with feet shoulder-  
width apart and lean forward  
as illustrated. Using the  
arms, gently pull the upper  
body towards the right leg.  
Let the head hang down.  
DO NOT BOUNCE!  
While sitting on the floor,  
have legs apart, one leg  
straight and one knee bent.  
Pull the chest down to touch  
the thigh on the leg that is  
bent, and twist at the waist.  
Hold this position at least 10  
seconds. Repeat 10 times  
on each side.  
Hold the position a minimum  
of 10 seconds. Repeat  
pulling the upper body to the  
left leg. Do this stretch  
several times slowly.  
Remember to always check with your physician before starting any exercise program.  
Cool-Down The purpose of cooling down is to return the body to its normal, or near normal, resting state  
at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to  
return to the heart. Your cool-down should include the stretches listed above and should be completed after  
each strength training session.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
MODEL 15-0200C  
WARRANTY  
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship  
under normal use, service and proper operation for a period of 90 days on the parts and three years on the  
frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL NOT  
APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE, MISUSE,  
ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY REPAIR,  
REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED BY STAMINA  
PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health clubs, spas,  
gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the product's use is  
in furtherance of a profit making enterprise, and all other use which is not for personal, family, or household  
purposes.  
To implement this limited warranty, send a written notice stating your name, date, and place of purchase and  
a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071, Springfield  
Missouri, USA, 65801-1071, or email us at [email protected], or call us at  
1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to return the  
product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH OF THIS  
LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE DATE THE  
ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR BREACH OF  
ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER DELIVERY OF  
THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF ANY PART OF THE  
PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY IMPLIED WARRANTY,  
THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDYAVAILABLE TO YOU. In  
the event that the purchaser makes any claim under this limited warranty or any implied warranty, the Warrantor  
reserves the right to require the product to be returned for inspection, at the purchaser's expense, to the  
Warrantor's premises in Springfield, Missouri. Return of the enclosed warranty registration card is not required  
for warranty coverage, but is merely a way of establishing the date and place of purchase.  
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS OF  
TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,  
SPECIAL OR INCIDENTALDAMAGESDUE TO BREACH OF THEABOVE WARRANTY ORANY IMPLIED  
WARRANTY.  
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This warranty  
gives you specific legal rights, and you may also have other legal rights which vary from state to state.  
ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED INDURATION TO THE  
DURATION OF THIS WARRANTY.  
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods to  
disclaim or limit implied warranties and consequential and incidental damages with respect thereto. If any  
such law is found to be applicable, the foregoing disclaimers and limitations of and on implied warranties and  
consequential and incidental damages with respect thereto shall be disregarded and shall be deemed not to  
have been made to the extent necessary to comply with such legal restriction.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PRODUCT PARTS DRAWING  
FRONT  
BACK  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
PART#  
PART NAME  
QTY  
1
2
3
4
5
6
7
8
Main Frame  
Rear Frame  
Rear Stabilizer  
Front Stabilizer  
Seat Frame  
Back Support  
Handrail  
Crank  
Bearing Housing  
Ball Bearing  
Inside Bearing Collar  
Outside Bearing Collar  
Bearing Washer  
Bearing Snap Washer  
Bearing Nut  
Pulley  
1
1
1
1
1
1
1
1
2
2
1
1
1
1
2
1
1
1
2
2
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
1
2
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
41  
42  
43  
44  
45  
46  
47  
48  
V-Ribbed Belt  
Idler Arm  
Bearing (608zz)  
C Ring (8mm)  
Tension Spring  
Magnetic Flywheel  
Small Pulley/w Shaft  
Bearing (6004zz)  
C Ring (20mm)  
Key  
Wave Washer (M8)  
Magnetic Brake  
Tension Knob  
Spring  
Meter Bracket  
Meter  
Sensor Wire  
Grommet Plug  
Magnet  
Left Cover  
Right Cover  
Ring Cap  
Left Pedal  
Right Pedal  
Adjustment Knob  
Bushing  
Seat  
Back Cushion  
Locking Knob  
Foam Grip  
Pull Pin  
Moving Wheel  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PARTS LIST  
PART#  
PART NAME  
QTY  
49  
50  
51  
52  
53  
54  
55  
56  
57  
58  
59  
60  
61  
62  
63  
64  
65  
66  
67  
68  
69  
70  
71  
72  
73  
74  
75  
76  
77  
78  
79  
80  
Protection Pad  
Leveling Cap (50mm)  
Endcap (50mm)  
Rectangular Plug (30mm x 60mm)  
Square Plug (30mm x 30mm)  
Dome Plug (25mm)  
Oval Plug (20mm x 40mm)  
Carriage Bolt (M8 x 1.25 x 60mm)  
Carriage Bolt (M8 x 1.25 x 85mm)  
Screw, Round Head (M3 x 10mm)  
Screw, Round Head (M4 x 20mm)  
Screw, Round Head (M5 x 0.8 x 10mm)  
Screw, Round Head (M5 x 0.8 x 15mm)  
Bolt, Round Head (M6 x 1 x 15mm)  
Bolt, Hex Head (M6 x 1 x 47mm)  
Bolt, Hex Head (M8 x 1.25 x 20mm)  
Bolt, Hex Head (M8 x 1.25 x 40mm)  
Bolt, Hex Head (M8 x 1.25 x 55mm)  
Bolt, Hex Head (M10 x 1.5 x 110mm)  
Nut (M6 x 1)  
Acorn Nut (M8 x 1.25)  
Nylock Nut (M6 x 1)  
Nylock Nut (M8 x 1.25)  
Nylock Nut (M10 x 1.5)  
Lock Washer (M8)  
Arc Washer (M8)  
Washer (M8)  
Washer (M10)  
Warning label  
1
2
2
2
1
2
2
4
1
2
6
2
1
1
2
5
4
1
1
1
4
2
2
2
1
6
11  
3
1
1
1
1
Combination Wrench  
Manual  
Spacer  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FAX/MAIL ORDERING FORM  
Please do not return the product. For your convenience, Stamina's Customer Service Department can be  
reached by email at [email protected] or toll free at 1-800-375-7520 (in the U.S.).  
Should a part be missing or a defective part found, please call us from 7:30 A.M. to 5:00 P.M. Central Time,  
Monday through Thursday and 8:00 A.M. to 3:00 P.M. on Friday or fill out the fax sheet ordering form below  
and fax it to (417)889-8064. Our Customer Service Department will be able to assist you with your problem  
and the part will be mailed directly to your house.  
TELEPHONE  
FAX  
ONLINE  
MAIL  
CUSTOMER SERVICE  
Tel: 1 (800) 375-7520  
CUSTOMER SERVICE  
Fax: (417) 889-8064  
CUSTOMER SERVICE  
STAMINA PRODUCTS, INC.  
ATTN: Customer Service  
P.O. Box 1071  
Springfield, MO. 65801-1071  
Detach and Mail or Fax the Form Below  
Stamina Products, Inc.  
P.O. Box 1071  
Springfield, MO 65801-1071  
Mr./Ms:  
Address:  
City:  
Apt. #:  
Zip Code:  
State:  
IMPORTANT: We must have your phone number in order to process the order!  
Phone #: (  
)
Work Phone #: (  
)
Date Purchased:  
Model #:  
Purchased From:  
IMPORTANT : Before filling out the form below make sure you have the right information.  
Refer to the parts list to make sure you're ordering the right parts!  
PART #  
1
DESCRIPTION  
QUANTITY  
1
EXAMPLE:  
Rear Unit Assembly  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Flat Panel Television LC 13S2U LC 15S2U LC 20S2U User Manual
Shure Headphones GLX D User Manual
Sony Home Theater System BDV N5200W User Manual
Sony Projector 330 User Manual
Sony VCR HKSR 5803HQ User Manual
StarTechcom Switch IPUSB2HD2 User Manual
Stovax Indoor Fireplace PR0741 User Manual
SunBriteTV Car Satellite TV System SB 5517HD User Manual
Sunpak Barcode Reader ALLIN1 CR BK User Manual
Tannoy Speaker B475 User Manual