Fitness Bike
OWNER’S MANUAL
Please carefully read this entire manual before operating your new fitness bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Product Registration
1
2
Important Safety Instructions
Important Electrical Instructions
XBR95 Assembly Instructions
Product Features
3
4
9
Operation of Your Console
Programmable Features
Using A Heart Rate Transmitter
General Maintenance
11
15
26
28
29
Manufacturer’s Limited Warranty
ATTENTION
This fitness bike is intended for residential use only and is warranted for this
application.Any other application voids this warranty in its entirety.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Congratulations on your new fitness bike and welcome to the Spirit Fitness family!
Thank you for your purchase of this quality group fitness bike from Spirit Fitness.Your new
fitness bike was manufactured by one of the leading fitness manufacturers in the world and is
backed by one of the most comprehensive warranties available.Through your dealer, Spirit Fitness
will do all we can to make your ownership experience as pleasant as possible for many years to
come. If not purchased direct from Spirit Fitness, the local dealership where you purchased this
fitness bike is your administrator for all Spirit Fitness warranty and service needs.Their responsi-
bility is to provide you with the technical knowledge and service personnel to make your experi-
ence more informed and any difficulties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone number,
and the date of purchase below to make any future, needed contact easy.We appreciate your
support and we will always remember that you are the reason that we are in business. Please
complete and mail your registration card today and enjoy your new fitness bike.
Yours in Health,
Spirit Fitness
Name of Dealer
Dealer Phone #
Purchase Date
Record Your Serial Number
Please record the serial number of this fitness product
in the space provided below.
Serial Number
Register Your Purchase
The self-addressed product registration card must be completed in full and returned to Spirit
to register online.
XBR95_20110623
1
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING - Read all instructions before using this appliance.
ƒ Do not operate fitness bike on deeply padded, plush or shag carpet. Damage to both carpet
and fitness bike may result.
ƒ Keep children away from the fitness bike.There are obvious pinch points and other
caution areas that can cause harm.
ƒ Keep hands away from all moving parts.
ƒ Never drop or insert any object into any openings.
ƒ Do not use outdoors.
ƒ Do not attempt to use your fitness bike for any purpose other than for the purpose it is
intended.
ƒ The hand pulse sensors are not medical devices.Their purpose is to provide you with an ap-
proximate measurement in relation to your target heart rate. Use of a chest transmitter strap
is a much more accurate method of heart rate analysis .Various factors, including the user’s
movement, may affect the accuracy of heart rate readings.The pulse sensors are intended
only as exercise aids in
determining heart rate trends in general.
ƒ Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on
your fitness bike. Quality athletic shoes are recommended to avoid leg fatigue.
SAVETHESE INSTRUCTIONS -THINK SAFETY!
2
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING!
ƒƒ NEVER expose this fitness bike to rain or moisture.This product is NOT designed for use
outdoors, near a pool or spa, or in any other high humidity environment.The operating
temperature specification is 40 to 120 degrees Fahrenheit, and humidity is 95%
non-condensing (no water drops forming on surfaces).
ƒƒ NEVER operate this fitness bike without reading and completely understanding the
results of any operational change you request from the computer.
ƒ Understand that changes in resistance do not occur immediately. Set your
desired resistance level on the computer console and release the adjustment key.
The computer will obey the command gradually.
ƒ Use caution while participating in other activities while pedaling on your fitness bike; such as
watching television, reading, etc.These distractions may cause you to lose
balance which may result in serious injury.
ƒ Do not use excessive pressure on console control keys.They are precision set to function
properly with little finger pressure.
3
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Video
To assist you in assembling your new Spirit Fitness fitness bike, we have posted an assembly video at the
Pre-Assembly
1. Using a razor knife (Box Cutter), cut the banding straps that wrap around the carton. Reach under the bottom
edge of the carton and pull it away from the cardboard underneath, separating the staples that join the two
together. Lift the box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged parts are
found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package.The hardware is separated into four steps. Remove the tools first. Remove the
hardware for each step as needed to avoid confusion.The numbers in the instructions that are in parenthesis
(#) are the item number from the assembly drawing for reference.
Assembly Tools
#114.ƒPhillips Head
#115.ƒL Allen Wrench
Screwdriver
95
XBR
#112.ƒ12/14mm
#113.ƒ13/15mm
#130.ƒ13/14mm
Wrench
Wrench
Wrench
4
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 1: Rear Stabilizer & Seat Back
1. Attach the Rear Stabilizer (7) to the Main Frame (1) with the four Hex Head Bolts (65) and four Flat Washers
(84).Tighten completely with the wrench (112).
2. Attach the Seat Back (5) to the Seat Carriage (4) of the main frame. Slide a Hex Head Bolt (67) through each
side, then attach a Nyloc Nut (89) to each bolt.Tighten the bolts just enough so there is no side to side play, but
freedom of movement front to back. Use the wrenches provided (112 & 130).
HARDWARE
#89.ƒ3/8” x 7T
Nyloc Nut
(2 pcs)
#84.ƒ3/8” x 25 x 2T
Flat Washer
#65. 3/8” x 2-1/4”
Hex Head Bolt (4
pcs)
#67.ƒ3/8” x 4”
Hex Head Bolt
(2 pcs)
(4 pcs)
5
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 2: Console Mast
1. Slide the Computer Cable (44), Handlebar resistance control cable (148), and Hand pulse cable (133) through
the bottom of the Console Mast Cover (31) and then the bottom of the Console Mast (2). Make sure the
Console Mast Cover is correctly oriented (see illustration).
2. Install the Console Mast (2) into the receiving tube (make sure not to pinch cables; damage to the electronics
could occur) of the Main Frame (1). Insert two Hex Head Bolts (68) and two Flat Washers (76) on each side.
Insert two Hex Head Bolts and two Curved Washers (83) on the front.Tighten all six bolts firmly with the
Wrench (112).
3. Remove the white Styrofoam pad (factory installed to prevent bolts from being accidentally dropped into the
console mast tube).
4. Attach the Handle Bar Assembly (3) onto the Console Mast (2) bracket with the two Hex Head Bolts (68),
two Split Washers (82), and two Flat Washers (76). Completely tighten with the wrench (112).
5. Insert the Computer Cable (44), Handlebar resistance control cable (148), and Hand Pulse Cable (133) into
their respective connectors in the back of the Console Assembly (19).Attach the
console onto the mounting plate with four Phillips Head Screws (99).Tighten with the Phillips Head Screw
Driver (114).
HARDWARE
#82.ƒ8 x 1.5T
Split Washer
(2 pcs)
#83.ƒ5/16” x 19 x 1.5T
Curved Washer
(2 pcs)
#76.ƒ5/16” x 18 x 1.5T
Flat Washer
#68.ƒ5/16” x 15mm Hex
Head Bolt
#99.ƒM5 x 12mm
Phillips Head Screw
(4 pcs)
(6 pcs)
(8 pcs)
6
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: Seat & Handle Bar
1. Install the Seat (61) on the Seat Carriage (4) with four Phillips Head Screws (98).Tighten with the Phillips Head
Screw Driver (114).
2. Attach the Seat Handle Bar (6) to the Seat Carriage (4) with the four Hex Head Bolts (71), four Flat Washers
(77), and four Nyloc Nuts (89).Tighten with the wrenches provided (112 & 130).
3. Plug the Hand Pulse Sensor Cables (27) into the rear two holes on the left side of the rear
plastic cover. Plug the Handlebar resistance cables (150) into the remaining front hole.
4. Attach the Front Stabilizer Cover (32) and the Rear Stabilizer Cover (37) to the Main Frame with four Phillips
Head Screws (99).Tighten with the Phillips Head Screw Driver (114).
HARDWARE
#77. 3/8” x 19 x 1.5T
Flat Washer
#98.ƒM6 x 15mm
Phillips Head Screw
(4 pcs)
#89.ƒ3/8” x 7T
Nyloc Nut
(4 pcs)
#99.ƒM5 x 12mm
Phillips Head Screw
(4 Pcs)
#71. 3/8” x 1-3/4” Hex
Head Bolt
(4 Pcs)
(4 Pcs)
7
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4: Plastic Parts
1. Put the Seat Recline Release Cable (58) on the U Bracket of the Seat Back Frame (5).
2. Install the Gas Cylinder (57) on the Seat Back Frame (5) with one Hex Head Bolt (70), one Flat Washer (76)
and one Nyloc Nut (91) by using the wrenches provided (112 & 113).
3. Remove the Button Head Socket Screws holding the clamps of the left and right Release Levers (40) by using
the M5 Allen Wrench (115). Install the Release Levers (40) onto the Seat Handle Bars (6) just behind the
Hand pulse sensors on each side. Install them at an angle that allows easy access for use, then reinsert and
tighten the socket screws removed earlier. Don’t over tighten these screws.
4. Secure the Steel Cables (58 & 59) to the Seat Handle Bar (6) with 2pcs ofVelcroTape.Wrap the tape around
the handlebars in places that will be under the beverage holders so they are out of sight.
5. Attach the Pedals (L, R)(116,117) to the Crank Arms (51L, 51R).Tighten with the wrench (113). Remember
that the left pedal has a reverse thread and will be threaded onto the Crank arm in a counterclockwise motion.
There is an “L” stamped in the end of the threaded post of the left pedal and an “R” in the right. Make sure to
tighten the pedals as firmly as you can. It may be necessary to re-tighten the pedals if you feel a thumping while
pedaling the bike.A thumping or clicking noise is usually caused by loose pedals.
6. Attach the Drink Bottle Holders (L39 & R38) to the sides of the Seat Handle Bar (6) with four Sheet Metal
Screws (105).Tighten with the Phillips Head Screw Driver (114).
HARDWARE
#76.ƒ5/16” x 18 x 1.5T
Flat Washer
#91.ƒ5/16” x 6T
Nyloc Nut
(1 pc)
#105.ƒ4 x 16mm
Sheet Metal Screw
(4 pcs)
#70.ƒ5/16” x 1-1/4”
Hex Head Bolt
(1 pc)
(1 pc)
8
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Footpads
Through research performed with a leading sports scientist and physical rehabilitation expert,
Spirit Fitness engineering has developed a breakthrough in pedal design.Typical stationary
exercise bikes are wider than a normal road bike.The reason is to allow for the braking
mechanism, pulleys, drive components and plastic covers. Since the bike is wider, so is the
distance between the pedals; this width between the pedals is called the Q factor.
Spirit Fitness has designed our pedal system so the Q factor is the smallest in the industry, but
we did not stop there.We have also custom designed and tooled a new pedal that provides
a 2° inward tilt to compensate for the Q factor not being perfect. Having a small Q factor in
addition to the 2° inward tilt of the pedals puts the user into a biomechanical neutral alignment.
This means that your feet, ankles, knees and hips are lined up properly ensuring a comfortable
workout.
Transportation
The fitness bike is equipped with two transport wheels that are engaged when the rear of the
XBR Series fitness bike is lifted.
Seat Adjustability
There is a cable activated hand lever on left side of the seat for convenient
adjustments of the seat location.This can be used from the seated position so you don’t have
get out of your seat and guess where the seat should be located.
Console
The console will display RPM, Calories burned,Time (elapsed or
countdown), Distance travelled, Pulse, Resistance Level, Program
Name, Speed,Watts, and number of Laps completed.There is also
a resistance level profile graph that lets you see how hard you
have worked and how challenging the upcoming segments will be.
9
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
MUSCLE ACTIVATION FIGURE
There is an anatomical figure located at the top of the console.This figure will light all areas that
are activated when using the fitness bikel.These will light up during any of the programs.You can
control which muscles are activated by changing the incline and swinging your arms.The pre-set
programs will determine which lower body muscles will be activated by automatically adjusting
the incline. Generally the
following guidelines hold true:
•
The upper body LED’s will light any time your hands aren’t in contact with
the pulse grip sensors
•
The lower body lights will activate in three degrees of engagement: Green
represents minimal muscle involvement,Amber represents medium
involvement, and Red represents full or heavy activation.
ƒ
0-4.5% Elevation: even muscle distribution, all four
muscle groups will be Amber
ƒ
5-15% Elevation: Quads are Amber and Glutes, Hamstrings,
and Calves are Red
HEART RATE % PROFILE
The console LCD screen will display your current heart rate anytime a
pulse is detected.The Bar Graph, located to the right of the LCD screen,
will show your current heart rate % in relation to your projected maximum
heart rate, which is determined by your age that you entered during the
programming phase of any of the 10 programs.The significance of the bar
graph colors are as follows:
•
•
•
50-60% of maximum is Amber
65-80% of maximum is Amber and Green
85-90% or more is Amber, Green, and Red
10
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
XBR95 Console
Integrated Speakers
for MP3 Player
Muscle
Activation Profile
Large LCD with
scrolling feedback
and scrolling
message center
Heart Rate % Profile
Swivel Fan to
keep you cool
Ten innovative
programs offer a
variety of work-outs
Convenient cargo
compartment for
keys, phone, or
MP3 player
Easy-Touch
Control Buttons
Power
The console power is created by a built in generator.When you begin pedaling the Fitness Bike,
the console will automatically power up. If there is no movement at the flywheel, the console will
go to stand-by mode. In stand-by mode the console
display will turn off.To turn the console on, begin pedaling.
When initially powered on the console will perform an internal self-test. During this time all the
lights will turn on.When the lights go off, the Message Center will show the software version (i.e.:
VER 1.0).The distance window shows the distance in miles and the time window shows the total
hours of use.
The odometer will remain displayed for only a few seconds then the console will go to the start
up display.The dot matrix display will be scrolling through the different profiles of the programs
and the Message Center will be scrolling the start up
message.You may now begin to use the console.
11
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Dot Matrix Center Display
Twenty columns of boxes (8 high) indicate each segment of a workout.The boxes only show an
approximate level (resistance) of effort.They do not necessarily indicate a specific value - only an
approximate percent to compare levels of intensity. In Manual Operation the resistance dot matrix win-
dow will build a profile “picture” as values are changed during a workout.
The speed and incline profiles will display half of the program at one time (9 columns).They will both
scroll right to left.The Lap track will move in a counterclockwise direction.
1/4 Mile Track
The 1/4-mile track (one lap) will be displayed around the dot matrix window.The flashing
segment indicates your progress. Once the 1/4-mile (Metric - 0.4k) is complete this feature will
begin again.There is a lap counter in the message window for monitoring your distance.
Pulse Grip Feature
The Pulse (Heart Rate) console window will display your current heart rate in beats per minute
during the workout.You must use both stainless steel sensors on the front cross bar or the heart
rate transmitter chest strap to display your pulse. Pulse value displays anytime the upper display is
receiving a Pulse signal.You may not use the Grip Pulse feature while in Heart Rate Programs.
Note: Refer to Important Safety Instructions (page 2) concerning Pulse Grip operation.
Calorie Display
Displays the cumulative calories burned at any given time during your workout.
Note:This is only a rough guide used for comparison of different exercise sessions, which cannot be used for
medical purposes.
Speakers
The console has built-in Speakers.You may plug an Audio Source (CD player, MP3, Computer,
etc.) into the Jack on the right side of console.There is no volume control on the console.The
volume must be controlled on the Audio Source.
12
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Start
This is the quickest way to start a workout.After the console powers
up you just press the Start key to begin, this will initiate the Quick
Start mode. In Quick Start theTime will count up from zero and the
workload may be adjusted manually by pressing the LevelƒUp/
Down buttons.The dot matrix display will have only the bottom row
lit at first.As you increase the work load more rows will light indicating
a harder workout.The fitness bike will get harder to pedal as the rows increase.
There are 20 levels of resistance available for plenty of variety.The first 5 levels are very easy
workloads and the changes between levels are set to a good progression for de-conditioned
users. Levels 6-10 are more challenging, but the increases in resistance from one level to the
next remain small. Levels 11-15 start getting tough as the levels jump more dramatically. Levels
16-20 are extremely hard and are good for short interval peaks and elite athletic training.
Basic Information
The Message Center will initially be displaying the Program name.
When in scan mode during a program, speed will be displayed for four
seconds, then move on and display Watts (indication of workload). If
100 watts is displayed, you are doing enough work to keep a 100-watt
light bulb lit.The data changes to Laps completed, Segment time, Max
level. Pressing the Enter button again will bring you back to
the beginning.
The Stop button actually has several functions. Pressing the Stop key
once during a program will pause the program for 5 minutes. If you
need to get a drink, answer the phone or any of the many things that
could interrupt your workout, this is a great feature.To resume your
workout during Pause, just press the Start key. If the Stop button is
pressed twice during a workout, the program will end and the console will display your
Workout Summary (Total time,Avg. Speed,Avg.Watts,Avg. HR, total Laps). If the Stop key is
held down for 3 seconds or a third time during the program, the console will perform a
complete Reset. During data entry for a program the Stop key performs a previous
screen or segment function.This allows you to go back to change programming data.
13
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Program Keys
The program keys are used to preview each program.When you first turn the console on you
may press each program key to preview what the program profile looks like. If you decide that
you want to try a program, press the corresponding program key and then press the Enter key
to select the program and enter into the data-setting mode.
The fitness bike has a built in heart rate monitoring system. Simply grasping the hand pulse sen-
sors on the stationary handle bars or wearing the heart rate transmitter (see Using Heart Rate
Transmitter section) will start the Heart Icon blinking (this may take a few seconds).The Pulse
Display Window will display your heart rate, or Pulse in beats per minute.
The console includes a built-in fan to help keep you cool.To turn the fan on, press the button on
the left side of the console.
Programming The Console
Each of the programs can be customized with your personal information and changed to suit
your needs. Some of the information asked for is necessary to ensure the readouts are correct.
You will be asked for your Age and Weight. Entering your Age is necessary during the Heart
Rate programs to ensure the correct settings are in the program for your Age. Otherwise the
work settings could be too high or low for you. Entering your Weight aides in calculating a more
correct Calorie reading.Although we cannot provide an exact calorie count, we do want to be
as close as possible.
CALORIE NOTE: Calorie readings on every piece of exercise equipment, whether it is in a gym
or at home, are not accurate and tend to vary widely.They are meant only as a guide to monitor
your progress from workout to workout.The only way to measure your calorie burn accurately
is in a clinical setting connected to a host of machines.This is because every person is different
and burns calories at a different rate. Some good news is that you will continue to burn calories
at an accelerated rate for at least an hour after you have finished exercising!
Entering A Program And Changing Settings
When you enter a program, by pressing a program key, then Enter key, you have the option of
entering your own personal settings. If you want to workout without entering new settings, then
just press the Start key.This will bypass the programming of data and take you directly to the
start of your workout. If you want to change the personal settings then just follow the
instructions in the Message Center. If you start a program without changing the settings,
the default or saved settings will be used.
NOTE:Age and Weight default settings will change when you enter a new number. So the last
Age and Weight entered will be saved as the new default settings. If you enter your Age and
Weight the first time you use the fitness bike, you will not have to enter it every time you work
out unless either your Age or Weight changes, or someone else enters a different Age and
Weight.
14
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual
The Manual program works as the name implies, manually.This means that you control the
workload and not the computer.To start the Manual program, follow the instructions below or
just press the Manual button, then the Enter key and follow the directions in the
Message Center.
1. Press the Manual key, then press the Enter key.
2. The Message Center will ask you to enter your Age.You may
enter your age, using the Up/Down keys, then press the Enter
key to accept the new value and proceed on to the next screen.
3. You are now asked to enter your Weight.You may adjust the
Weight value using the Up/Downƒkeys, then press Enter to
continue.
4. Next isTime.You may adjust theTime and press Enter to
continue.
5. Now you are finished editing the settings and can begin your
workout by pressing the Start key.You can also go back and
modify your settings by pressing the Stop key. NOTE:At any time
during the editing of Data you can press the Stop key to go back
one level, or screen.
6. Once the program starts you will be at level one.This is the
easiest level and it is a good idea to stay at level one for a while
to warm up. If you want to increase the work load at any time
press the Up key; the Down key will decrease the work-load.
7. During the Manual program you will be able to scroll through the
data in the Message Center by pressing the Enter key.
8. When the program ends you may press Start to begin the same program again or Stop
to exit the program or you can save the program you just completed as a custom user
program by pressing a User key and following the instructions in the Message Center.
15
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Calorie Program
1. Press the Calorie key. Press Enter to select the program.The display will prompt you through the
programming.
2. If Enter was pressed, the Message Center will now be blinking a value, indicating your Age (default is 35).
Entering your correct age affects the heart rate Bar Graph Display and the Heart Rate programs. Use the
LevelƒUp/Down keys to adjust, then press Enter.Your age determines your recommended maximum
heart rate. Since the Bar Graph Display and the Heart Rate program features are based on a percentage of
your maximum heart rate, it is important to enter the correct age for these features to work properly.
3. The Message Center will now be blinking a value, indicating your Body Weight (default is100). Entering the
correct body weight will affect the calorie count. Use the LevelƒUp/Down keys to adjust, then press Enter.
A note about the Calorie display: No exercise machine can give you an exact calorie count because there are too
many factors which determine exact calorie burn for a particular person. Even if someone is the exact same body
weight, age and height, their calorie burn may be very different than yours.The Calorie display is to be used as a
reference only to monitor improvement from workout to workout.
4. The Message Center displays “Use Level Up or Down keys to adjust Calorie burn” (default is 300) After
adjusting, press Enter.
5. The Message Center will now be blinking the preset Avg. pedal RPM (revolutions per minute) (default is 50);
After adjusting press Enter.
6. The Message Center will now be blinking the preset top resistance of the selected program (default is Level
5). Use the LevelƒUp/Down keys to adjust, then press Enter. Each program has various resistance changes
throughout; this allows you to limit the highest resistance the program can reach.
7. The Message Center displays the ProgramTime (a value that that was determined by the data you entered in
steps 3-6); Press Start to accept the calculatedTime or the Enter key to return to steps 4-6 and change the
data, which will recalculate the ProgramTime.
•
•
•
When the Start key is pressed, the program begins with a 3:00 warm up (1:00 @ Level 1, 1:00 @ Level 2, and
1:00 @ Level 3) or you have the option of pressing the Enterƒkey again to bypass and begin the workout.
When the program begins both the Calorie andTime windows will count down to 0. If theTime expires
before calories burned reaches 0, theTime window will begin accumulated time, until Calories reach 0.
After the program has ended, there will be a 3:00 cool down (1:00 @ Level 3, 1:00 @ Level 2, and 1:00 @ Level
1) or you have the option of pressing the Enter key to end the workout.
16
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Fusion Program
In this interval program you will alternate between mid-high intensity cardiovascular intervals on the bike, strength
exercises off of the bike, and low intensity recovery intervals on the bike.You will need a pair of objects that can be
comfortably held in your hands (dumbbells, water jugs, soup cans, etc.) for 4 of the 5 strength exercises performed in
this program
1. Press the Fusion key. Press Enter to select the program.The display will prompt you through the
programming.
2. If Enter was pressed, the Message center will now be blinking a value, indicating your Age (default is 35).
Entering your correct age affects the heart rate Bar Graph Display and the Heart Rate programs. Use the
LevelƒUp/Down keys to adjust, then press Enter.Your age determines your
recommended maximum heart rate. Since the Bar Graph Display and the Heart Rate features are based on
a percentage of your maximum heart rate, it is important to enter the correct age for these features to work
properly.
3. The Message Center will now be blinking a value, indicating your Body Weight (default is 150 lbs). Entering the
correct body weight will affect the calorie count. Use the LevelƒUp/Down keys to adjust, then press Enter.
A note about the Calorie display: No exercise machine can give you an exact calorie count because there are too many factors which determine
exact calorie burn for a particular person. Even if someone is the exact same body weight, age and height, their calorie burn may be very different
than yours.The Calorie display is to be used as a reference only to monitor improvement from workout to workout.The calorie count displayed in
this program won’t be accurate because the machine can’t calculate calories expended while strength training.
4. The Message Center will now be blinking the preset top Resistance level of the selected program (default/mini-
mum resistance is Level 5). Use the LevelƒUp/Down keys to adjust, then press Enter.This value will be the
Level for all cardio intervals.The resistance level can be adjusted at any time during the program.
5. The Message Center will be blinking the number of intervals desired (default is 10); you may select 10 (5 cardio
& 5 strength), 20 (10 cardio & 10 strength), or 30 (15 cardio & 15 strength). Use the LevelƒUp/Down keys
to adjust, then press Enter.
6. The Message Center will be blinking the desired Interval time (default is 2:00).The time you select will be the
duration of each cardio interval. Note:As a general rule, the longer the interval, the less resistance (fitness bike) is
required and the more repetitions you perform, the less weight
(dumbbells) you need to use; use the LevelƒUp/Down keys to adjust, then press Enter.
7. The Message Center will be blinking the recovery time you desire (default is 0:30) after completing both the
cardio & strength intervals. Use the LevelƒUp/Down keys to adjust, then press Enter.
CAUTION: the shorter the recovery time, the longer your heart rate will stay elevated; if you are new to exercise or have recently resumed an exer-
cise program after a considerable amount of time off, it is recommended that your recovery interval length either matches or exceeds the length of
the cardio interval.
PROGRAM EXAMPLE
•
•
•
•
The user selects 10 intervals (5 cardio and 5 strength) with the following interval durations – length of each cardio and recovery interval is
1:00
Program begins with a 3:00 warm up (1:00 @ Level 1, 1:00 @ Level 2, and 1:00 @ Level 3).You have the option to press Enter to bypass
the warm up.
1st cardio interval begins, lasting 1:00; console counts down to 0:00 and the Message Center displays “STRENGTH INTERVAL BEGIN
DUMBBELL ROW”
User exits the bike to perform the strength exercise.The user now performs 8-20 repetitions (each repetition is 1 up and down portion of
the exercise).
Note: if you are a beginner or are in below average physical condition, perform each repetition in approximately 2 seconds (1 second up, 1 second down); if you are
in average or above average physical condition, with no medical issues, you have the option to perform the repetitions faster (1 second total: .5 seconds up, .5 seconds
down).After completing all of your repetitions, sit back on the bike to proceed with your recovery interval.
•
•
•
Console displays “PRESS ENTERTO BEGIN RECOVERY”; user pedals @ Level 1 for 1:00
Console then displays 2nd cardio interval and the process proceeds until the user has performed
5 cardio, 5 strength, and 5 recovery intervals; the 5 strength exercises will be performed 1x each. If you selected 20 intervals, you would
perform each strength exercise twice, before proceeding to the next exercise. If you selected 30 intervals, you will perform each strength
exercise 3x (each exercise once, until all five have been performed, then repeat the sequence twice more).
The last 2 segments of the program are a Cool Down phase with the user pedaling @ Level 1.This can be bypassed by pressing Enter to
end the program.
•
Caution: Exercises that require dumbbell use - Select a pair of dumbbells that you will be able to
safely and effectively maneuver for all of the strength intervals.
17
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
DUMBBELL SHOULDER PRESS
EMPHASIS: SHOULDERS
1. Hold the dumbbells at shoulder height with an
overhand (palms facing forward) or neutral
(palms facing one another) grip
2. Press the dumbbells straight overhead until
your arms are fully extended
3. Slowly lower to the start position
4. Repeat this sequence for the duration of the
strength interval
DUMBBELLTRICEP OVERHEAD EXTENSION
EMPHASIS: BACK OF ARMS
1. Hold the dumbbells at shoulder height behind your
head with a neutral grip (palms facing one another);
your elbows should be pointed straight ahead
2. Raise the dumbbells overhead until your arms are fully
extended; your upper arms should remain
stationary, pivoting at the elbows
3. Slowly lower to the start position
4. Repeat this sequence for the duration of the
strength interval
DUMBBELL BICEP CURL
EMPHASIS: FRONT OF ARMS
1. Hold the dumbbells with an underhand grip
(palms facing forward) beside your thighs
2. Tuck your upper arms into your ribcage
3. Curl the dumbbells to shoulder height by pivoting at
your elbows
4. Slowly lower to the start position
5. Repeat this sequence for the duration of the
strength interval
18
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
DUMBBELL BENT OVER ROW
EMPHASIS:MID/UPPER BACK & FRONT OF ARMS
1. Grasp the dumbbells with an overhand grip and
arms fully extended in front of thighs; feet are
spaced shoulder width apart
2. Maintain a slightly arched lower back throughout
the exercise (see side view)
3. Begin the exercise by drawing your elbows up
and out until there is a 90˚ bend in your elbows
4. Slowly lower the dumbbells back to the start
position
5. Repeat this sequence for the duration of the
strength interval
PUSH UP
EMPHASIS: CHEST, SHOULDERS, & BACK OF ARMS
There are two variations of this exercise. If you
aren’t able to perform the exercise as shown in
this illustration, place your knees on the floor, a
padded mat, or a pillow.Also, a wider hand position
places more emphasis on the chest and shoulder
muscles, while a narrower hand position places
more emphasis on theTricep muscles (back of the
arm)
1. Place your hands on the floor or a set of
dumbbells (Caution: be aware that the
dumbbells may roll and result in injury,
especially if the ends are round); draw your
stomach muscles towards your spine to
maintain a straight line between your ankles
and shoulders
2. Begin with your elbows bent at 90˚
3. Fully straighten your arms
4. Repeat this sequence for the duration of the
strength interval
19
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Programming Preset Programs
1. Select the desired program button then press the Enter key.
2. The Message Center will ask you to enter your Age.You may adjust
the age setting, using the LevelƒUp/Down keys, then press the
Enter key to accept the new number and proceed on to the next
screen.
3. You are now asked to enter your Weight.You may adjust the Weight
value using the Level Up/Down keys, then press Enter to
continue.
4. Next isTime.You may adjust the time and press Enter to continue.
5. Now you are asked to adjust the Max Resistance Level.This is the
peak exertion level you will experience during the program.Adjust
the level and then press Enter.
6. Now you are finished editing the settings and can begin your
workout by pressing the Start key.You can also go back and
modify your settings by pressing the Enter key.
7. If you want to increase or decrease the resistance at any time
during the program, press the LevelƒUp/Down keys on the
console or above the heart rate sensor grips of the stationary
handlebars.This will change the resistance settings of the entire
profile, although the profile picture on the screen will not change.
The reason for this is so that you can see the entire profile at all
times. If the profile picture is changed, it also would be
distorted and not a true representation of the actual profile.When
you make a change to the resistance, the Message Center will show
the current column and program maximum levels of work.
8. During the program you will be able to scroll through the data in
the message window by pressing the Enter key.
9. When the program ends the Message Center will show a summary of your workout.The
summary will be displayed for a short time, then the console will return to the start-up
display.
20
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Custom User Defined Programs
There are two customizable User programs that allow you to build and save your own workout.
The two programs, Userƒ1 and Userƒ2, operate exactly the same way so there is no reason
to describe them separately.You can build your own custom program by following the
instructions below or you can save any other preset program you complete as a custom
program. Both programs allow you to further personalize it by adding your name.
1. Press the Userƒ1 or Userƒ2 key.The Message Center will show a welcome message. If you
had previously saved a program the message will contain your name.Then press the Enter
key to begin programming.
2. When you press Enter, the Message Center will show “Name - A”, if there is no name
saved. If the name “David” had been previously saved the Message Center will show “Name -
David” and the D will be blinking. If there is a name saved you can change it or you may press
the Stop key to keep the name and continue to the next step. If you want to enter a name
use the Up/Down key to change the first letter then press Enter to save the first letter
and continue to the next letter.When you have finished entering the name press the Stop
key to save the name and continue to the next step.
3. The Message Center will ask you to enter your Age.You may enter your age, using the Levelƒ
Up/Down keys, then press the Enter key to accept the new value and proceed on to the
next screen.
4. You are now asked to enter your Weight.You may adjust the weight value using the Up/
Down keys or the numeric key pad, then press Enter to continue.
5. Next isTime.You may adjust the time and press Enter to continue.
6. Now you are asked to adjust the Max Resistance Level of the program, press Enter when
resistance has been selected.
7. Now the first column will be blinking and you are asked to adjust the resistance level for the
first segment(SEGMENT > 1) of the workout by using the LevelƒUp key.When you finish
adjusting the first segment, or if you don’t want to change, then press Enter to continue to
the next segment.
8. The next segment will show the same workload resistance level as the previously adjusted
segment. Repeat the same process as the last segment then press Enter. Continue this
process until all twenty segments have been set.
9. The Message Center will then tell you to press Enter to save the program.After saving the
program the Message Center says “New program saved” then will give you the option to
start or modify the program. Pressing Stop will exit to the start up screen.
21
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Programs
The fitness bike has seven different programs that have been designed for a variety of workouts.
These five programs have factory preset work level profiles for achieving different goals.
HILL
This program follows a triangle or pyramid type of gradual progression from approximately 10% of maximum effort
(the level that you chose before starting this program) up to a maximum effort which lasts for 10% of the total
workout time, then a gradual regression of resistance back to approximately 10% of maximum effort
RESISTANCE
FAT BURN
This program follows a quick progression up to the maximum resistance level (default or user input level) that is sus-
tained for 2/3 of the workout.This program will challenge your ability to sustain your energy output for an extended
period of time.
RESISTANCE
CARDIO
This program presents a quick progression up to near maximum resistance level (default or user input level). It has
slight fluctuations up and down to allow your heart rate to elevate, and then recover repeatedly, before beginning a
quick cool down.This will build up your heart muscle and increase blood flow and lung capacity
RESISTANCE
22
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
STRENGTH
This program has a gradual progression of resistance up to 100% of maximum effort that is sustained for 25% of
workout duration.This will help build strength and muscular endurance in the lower body and gluts.A brief cool
down follows.
RESISTANCE
INTERVAL
This program takes you through high levels of intensity followed by recovery periods of low intensity.This program
utilizes and develops your “FastTwitch” muscle fibers which are used when performing tasks that are intense and
short in duration. These deplete your oxygen level and spike your heart rate, followed by periods of recovery and
heart rate drop to replenish oxygen.Your cardiovascular system gets programmed to use oxygen more efficiently.
RESISTANCE
CALORIES
This program follows a quick progression up to the maximum resistance level (default or user input
level) that is sustained for 2/3 of the workout. This program will challenge your ability to sustain your
energy output for an extended period of time.
RESISTANCE
FUSION
This program takes you through high levels of cardio & strength intensity followed by recovery periods
of low intensity. This program utilizes and develops your “Fast Twitch” muscle fibers which are used
when performing tasks that are intense and short in duration. These deplete your oxygen level and
spike your heart rate, followed by periods of recovery and heart rate drop to replenish oxygen. Your
cardiovascular system gets programmed to use oxygen more efficiently.
RESISTANCE
23
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Programs
The old motto,“no pain, no gain”, is a myth that has been overpowered by the benefits of
exercising comfortably.A great deal of this success has been promoted by the use of heart rate monitors.
With the proper use of a heart rate monitor, many people find that their usual choice of exercise intensity
was either too high or too low and exercise is much more enjoyable by
maintaining their heart rate in the desired benefit range.
To determine the benefit range in which you wish to train, you must first determine your
Maximum Heart Rate.This can be accomplished by using the following formula: 220 minus your age.This
will give you the Maximum Heart Rate (MHR)for someone of your age.To determine the effective heart
rate range for specific goals you simply calculate a percentage of your MHR.Your Heart rate training zone
is 50% to 90% of your maximum heart rate. 60% of your MHR is the zone that burns fat while 80% is for
strengthening the cardio vascular system.This 60% to 80% is the zone to stay in for maximum benefit.
For someone who is 40 years old their
target heart rate zone is calculated:
220 – 40 = 180 (maximum heart rate)
180 x .6 = 108 beats per minute
(60% of maximum)
180 X .8 = 144 beats per minute
(80% of maximum)
So for a 40 year old the training zone would be 108
to 144 beats per minute.
If you enter your age during programming the
console will perform this calculation
automatically. Entering your age is used for the
Heart Rate programs.After calculating your MHR
you can decide upon which goal you would like to pursue.
The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the
heart and lungs) and weight control.The black columns on the chart above represent the MHR for a
person whose age is listed at the bottom of each column.The training heart rate, for either cardiovascular
fitness or weight loss, is represented by two different lines that cut diagonally through the chart.A defini-
tion of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or
if it is weight loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on a schedule
approved by your physician. Consult your
physician before participating in any exercise program.
With all Spirit Fitness Heart Rate programs fitness bikes you may use the heart rate monitor feature with-
out using the Heart Rate program.This function can be used during manual mode or during any of the
nine different programs.The Heart Rate program automatically controls
resistance at the pedals.
24
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Rate of Perceived Exertion
Heart rate is important but listening to your body also has a lot of advantages.There are more
variables involved in how hard you should workout than just heart rate.Your stress level, physical
health, emotional health, temperature, humidity, the time of day, the last time you ate and what
you ate, all contribute to the intensity at which you should workout. If you listen to your body, it
will tell you all of these things.
The rate of perceived exertion (RPE), also know as the Borg scale, was developed by Swedish
physiologist G.A.V. Borg.This scale rates exercise intensity from 6 to 20 depending upon how you
feel or the perception of your effort.
The scale is as follows:
Rating Perception of Effort
6 Minimal
7Very,very light
8Very,very light +
9Very light
10Very light +
11 Fairly light
12 Comfortable
13 Somewhat hard
14 Somewhat hard +
15 Hard
16 Hard +
17Very hard
18Very hard +
19Very,very hard
20 Maximal
You can get an approximate heart rate level for each rating by simply adding a zero to each rat-
ing. For example a rating of 12 will result in an approximate heart rate of 120 beats per minute.
Your RPE will vary depending up the factors discussed earlier.That is the major benefit of this
type of training. If your body is strong and rested, you will feel strong and your pace will feel
easier.When your body is in this condition, you are able to train harder and the RPE will support
this. If you are feeling tired and sluggish, it is because your body needs a break. In this condition,
your pace will feel harder.Again, this will show up in your RPE and you will train at the proper
level for that day.
25
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Wearing The Chest Strap
1. Attach the transmitter to the elastic strap using the locking parts.
2. Adjust the strap as tightly as possible as long as the strap is not too tight to
remain comfortable.
3. Position the transmitter with the logo centered in the middle of your torso facing
away from your chest (some people must position the
transmitter slightly left of center).Attach the final end of the elastic strap by
inserting the round end and, using the locking parts, secure the transmitter and
strap around your chest.
4. Position the transmitter directly below the pectoral muscles.
5. Sweat is the best conductor to measure very minute heart beat electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas on the reverse side of
the belt and both sides of the transmitter). It’s also recommended that you wear the
transmitter strap a few minutes before your work out. Some users, because of body chemistry, have a more
difficult time in achieving a strong, steady signal at the beginning.After “warming up”, this problem lessens.As
noted, wearing clothing over the transmitter/strap doesn’t affect performance.
6. Your workout must be within range - distance between transmitter/receiver – to achieve a strong steady
signal.The length of range may vary somewhat but generally stay close enough to the
console to maintain good, strong, reliable readings.Wearing the transmitter directly on bare skin
assures you of proper operation. If you wish, you may wear the transmitter over a shirt.To do so, wet the
areas of the shirt that the electrodes will rest upon.
Note:The transmitter is automatically activated when it detects activity from the user’s heart.Additionally, it
automatically deactivates when it does not receive any activity.Although the transmitter is water resistant,
moisture can have the effect of creating false signals, so you should take precautions to completely dry the
transmitter after use to prolong battery life (estimated transmitter battery life is 2500 hours).The replacement
battery is Panasonic CR2032.
Erratic Operation
Caution! Do not use this fitness bike for Heart Rate programs unless a steady, solid Actual Heart
Rate value is being displayed. High, wild, random numbers being displayed
indicate a problem.
Areas to look for interference which may cause erratic heart rate:
1. Microwave ovens,TV’s, small appliances, etc.
2. Fluorescent lights.
3. Some household security systems.
4. Perimeter fence for a pet.
5. Some people have problems with the transmitter picking up a signal from their skin. If you have problems try
wearing the transmitter upside down. Normally the transmitter will be oriented so the Spirit Fitness logo is
right side up.
6. The antenna that picks up your heart rate is very sensitive. If there is an outside noise source,
turning the whole machine 90 degrees may de-tune the interference.
7. Another Individual wearing a transmitter within 3’ of your machine’s console.
If you continue to experience problems contact your dealer.
26
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Heart Rate Program Operation
Note:You must wear the heart rate transmitter strap for these programs
Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set
to 80% of the maximum heart rate.They both are programmed the same way.
To start an HR program follow the instructions below or just select the HR1 or HR2
program, then the Enter button and follow the directions in the Message Center.
After selecting your heart rate target the program will attempt to keep you at or within 3-5
heart beats per minute of this value. Follow the prompts in the Message Center to
maintain your selected heart rate value.
1. Press the HRƒ1 or HRƒ2 key then press the Enter key.
2. The Message Center will ask you to enter your Age.You may enter your age, using the
LevelƒUp/Down keys, then press the Enter key to accept the new value and proceed
on to the next screen.
3. You are now asked to enter your Weight.You may adjust the weight value using the Levelƒ
Up/Down keys, then press Enter to continue.
4. Next isTime.You may adjust the time and press Enter to continue.
5. Now you are asked to adjust the Heart RateTarget.This is the heart rate level you will
strive to maintain during the program.Adjust the level using the LevelƒUp/Down keys,
then press Enter. Note:The heart rate that appears is based on the % you accepted in Step 1. If you
change this number it will either increase or decrease the % from Step 1.
6. Now you are finished editing the settings and can begin your workout by pressing the
Start key.You can also go back and modify your settings by pressing the Enter key.
Note:At any time during the editing of Data you can press the Enter key to go back one screen.
7. If you want to increase or decrease the workload at any time during the program press
the LevelƒUp/Down key.This will allow you to change your target heart rate at any
time during the program.
8. During the HR 1 or HR 2 programs you will be able to scroll through the data in the
Message Center by pressing the Enter key.
9. When the program ends you may press Start to begin the same program again or Stop
to exit the program or you can save the program you just completed as a custom user
program by pressing a User key and following the instructions in the Message Center.
27
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely one of two
reasons:
I. The hardware was not sufficiently tightened during assembly.All bolts that were installed
during assembly need to be tightened as much as possible. It may be necessary to use a larger wrench
than the one provided if you cannot tighten the bolts sufficiently. I cannot stress this point enough; 90% of
calls to the service department for noise issues can be traced to loose hardware.
II. The crank arm nut needs to be retightened
III. If squeaks or other noises persist, check that the unit is properly leveled.There are 2 leveling pads on the
bottom of the rear stabilizer, use a 14mm wrench (or adjustable wrench) to adjust the levelers.
Engineering Mode Menu
The console has built in maintenance/diagnostic software.The software will allow you to change
the console settings from English to Metric and turn off the beeping of the speaker when a key
is pressed for example.To enter the Engineering Mode Menu, press and hold down the Start,
Stop and Enter keys. Keep holding the keys down for about 5 seconds and the Message
Center will display Engineering Mode Menu. Press the Enter button to access the menu below:
a. KeyTest (Will allow you to test all the keys to make sure they are functioning)
b. Security (Allows the keypad to be locked to prevent unauthorized use)
c. Functions (Press Enter to access settings and Up arrow to scroll)
i. Sleep Mode (Turn on to have the console power down automatically after 20 minutes of
inactivity)
ii. DATest (Tests the brake resistance)
iii. Beep (Turns off the speaker so no beeping sound is heard)
iv. Units (Sets the display to readout in English or Metric display measurements)
v. ODO Reset (Resets the odometer)
vi. Pause Mode (Turn on allow 5 minutes of pause, turn off to have the console pause indefinitely)
d. LCDTest (Tests all the display functions)
28
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
Fitness Bike Warranty - Effective September 15, 2010
Spirit Fitness, Inc. (Spirit Fitness) warrants all its fitness bike parts for a period of time listed below from the date of retail sale, as determined by
sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date. Spirit Fitness’ responsibilities include
providing new or remanufactured parts, at Spirit Fitness’ option, and technical support to our independent dealers and servicing organizations. In
the absence of a dealer or service organization, these warranties will be administered by Spirit Fitness directly to a consumer.The warranty period
applies to the following components:
Warranty
Light Commercial
Frame
Lifetime
Brake
5Years
Partsƒ
3Years
WearƒItems*
6 Months
Laborƒ
1Year
(5 Hours use or less in a
non-dues paying facility)
Residential
Lifetime
Lifetime
10Years
1Year
*Wear items are rubber hand grips, pedals, console overlay and drive belts
NORMAL RESPONSIBILITIES OFTHE CONSUMER
This warranty applies only to products in ordinary household or Light Commercial use (see restrictions above), and the consumer/facility is
responsible for the items listed below:
1.
The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to
validate the manufacturer’s limited warranty.
2.
3.
4.
Proper use of the fitness bike in accordance with the instructions provided in this manual
Proper installation in accordance with instructions provided with the fitness bike and with all local electric codes.
Expenses for making the fitness bike accessible for servicing, including any item that was not part of the fitness bike at the time it was
shipped from the factory.
5.
6.
Damages to the fitness bike finish during shipping, installation or following installation.
Routine maintenance of this unit as specified in this manual.
EXCLUSIONS
This warranty does not cover the following:
1.
CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OFTHIS WRITTEN OR ANY IMPLIED WARRANTY.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or exclusion may not
apply to you.
2.
3.
Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or defects in
workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call reimbursement period, for
fitness bike not requiring component replacement, or fitness bike not in ordinary household or light commercial use.
Damages caused by services performed by persons other than authorized Spirit Fitness service companies; use of parts other than original
Spirit Fitness parts; or external causes such as corrosion, discoloration of paint or plastic, alterations, modifications, abuse, misuse, accident,
improper maintenance, inadequate power supply, or acts of God.
4.
5.
6.
Products with original serial numbers that have been removed or altered.
Products that have been: sold, transferred, bartered, or given to a third party.
Products that do not have a warranty registration card on file at Spirit Fitness. Spirit Fitness reserves the right to request proof of
purchase if no warranty record exists for the product.
7.
THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDINGTHE WARRANTIES
OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
8.
9.
Product use in any environment other than a residential setting or non-dues paying facility with 5 hours use or less per day.
Warranties outside of North America may vary. Please contact your local dealer for details.
SERVICE
Keep your bill of sale.Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping as
determined by the serial number establishes the labor warranty period should service be required. If service is performed, it is in your best
interest to obtain and keep all receipts.This written warranty gives you specific legal rights.You may also have other rights that vary from
state to state. Service under this warranty must be obtained by following these steps, in order:
1.
2.
3.
4.
Contact your selling authorized Spirit Fitness dealer. OR
Contact your local authorized Spirit Fitness service organization.
If there is a question as to where to obtain service, contact our service department at (870) 935-1107.
Spirit Fitness’ obligation under this warranty is limited to repairing or replacing, at Spirit Fitness’ option, the product through one of our
authorized service centers.All repairs must be preauthorized by Spirit Fitness. If the product is shipped to a service center freight charges to
and from the service
center will be the customer’s responsibility. For replacement parts shipped while the product is under warranty, the customer will be
responsible for shipping and handling charges. For in-home service, the customer will be responsible for a trip charge.There will be an
additional trip charge if the customer is located over 100 miles from the nearest service center.
The owner is responsible for adequate packaging upon return to Spirit Fitness. Spirit Fitness is not responsible for damages in shipping. Make
all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY UNITTO OUR FACTORY WITHOUT A RETURN
AUTHORIZATION NUMBER.All units arriving without a return authorization number will be refused.
For any further information, or to contact our service department by mail, send your correspondence to:
5.
6.
Spirit Fitness, Inc.
P.O. Box 2037
Jonesboro, AR 72402-2037
Product features or specifications as described or illustrated are subject to change without notice.All warranties are made by Spirit Fitness, Inc.
This warranty applies only in the 50 states of the U.S.A.
29
XBR95 Fitness Bike
Download from Www.Somanuals.com. All Manuals Search And Download.
2601 Commerce Drive Jonesboro, AR 72401 - Phone: 800-258-4555 - Fax: 870-935-7611
© 2011 All Rights Reserved.
XBR95 Owner’s Manual 11.
Rev. 1
www.spiritfitness.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|