OWNER’S MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE
OPERATING YOUR NEW ELLIPTICAL!
Download from Www.Somanuals.com. All Manuals Search And Download.
CONGRATULATIONS ON YOUR
NEW ELLIPTICAL AND WELCOME
TO THE SPIRIT FAMILY!
Thank you for your purchase of this quality elliptical trainer from Spirit Manufacturing, Inc.
Your new elliptical was manufactured by one of the leading fitness manufacturers in the
world and is backed by one of the most comprehensive warranties available. Through
your dealer, Spirit will do all we can to make your ownership experience as pleasant as
possible for many years to come. The local dealership where you purchased this elliptical
is your administrator for all Spirit warranty and service needs. Their responsibility is to
provide you with the technical knowledge and service personnel to make your experience
more informed and any difficulties easier to remedy.
Please take a moment at this time to record the name of the dealer, their telephone
number, and the date of purchase below to make any future, needed contact easy. We
appreciate your support and we will always remember that you are the reason that we are
in business. Please complete and mail your registration card today and enjoy your new
elliptical.
Yours in Health,
Spirit Manufacturing, Inc.
Name of Dealer_______________________________________________
Telephone Number of Dealer___________________________________
Purchase Date_______________________________________________
Product Registration
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in the space provided below.
Serial Number_______________________________________
REGISTER YOUR PURCHASE
The self-addressed product registration card must be completed in full and returned to Spirit
ver. A
2
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
WARNING - Read all instructions before using this appliance.
ŶDo not operate elliptical on deeply padded, plush or shag carpet. Damage to both
carpet and elliptical may result.
Ŷ
Ŷ
Keep children away from the elliptical. There are obvious pinch points and other
caution areas that can cause harm.
Keep hands away from all moving parts.
ŶNever operate the elliptical if it has a damaged cord or plug. If the elliptical is not working
properly, call your dealer.
Ŷ
Ŷ
Keep the cord away from heated surfaces.
Do not operate where aerosol spray products are being used or where oxygen is
being administered. Sparks from the motor may ignite a highly gaseous environment.
Ŷ
Ŷ
Never drop or insert any object into any openings.
Do not use outdoors.
ŶTo disconnect, turn all controls to the off position, then remove the plug from the outlet.
ŶDo not attempt to use your elliptical for any purpose other than for the purpose it is
intended.
ŶThe hand pulse sensors are not medical devices. Various factors, including the user¶s
movement, may affect the accuracy of heart rate readings. The pulse sensors are
intended only as exercise aids in determining heart rate trends in general.
Ŷ
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable
for use on your elliptical. Quality athletic shoes are recommended to avoid leg fatigue.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
3
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Electrical Information
WARNING!
ƔNEVER remove any cover without first disconnecting AC power supply.
ƔIf A.C. voltage varies by ten percent (10%) or more, the performance of your elliptical may be
affected. Such conditions are not covered under your warranty. If you suspect the voltage is
low, contact your local power company or a licensed electrician for proper testing.
ƔNEVER expose this elliptical to rain or moisture. This product is NOT designed for
Use outdoors, near a pool or spa, or in any other high humidity environment.
Important Operation Instructions
ƔNEVER operate this elliptical without reading and completely understanding the results of any
operational change you request from the computer.
ƔUnderstand that changes in resistance do not occur immediately. Set your desired level on
the computer console and release the adjustment key. The computer will obey the command
gradually.
ƔNEVER use your elliptical during an electrical storm. Surges may occur in your household
power supply that could damage elliptical components.
Ɣ
Use caution while participating in other activities while using your elliptical such as watching
television, reading, etc. These distractions may cause you to lose balance which may result in
serious injury.
Ɣ
Always hold on to a handrail or hand bar while making control changes.
Do not use excessive pressure on console control keys. They are precision set to properly
function with little finger pressure. Pushing harder is not going to make the unit go faster or
slower. If you feel the buttons are not functioning properly with normal pressure, contact your
Spirit dealer.
4
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly Instructions
Ŷ UNPACKING THE UNIT
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box along the dotted Line. Lift
Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or missing parts. If damaged
parts are found, or parts are missing, contact your dealer immediately.
3. Locate the hardware package. The hardware is separated into steps. Remove the tools first.
Remove the hardware for each step as needed to avoid confusion.
STEP 1: CONSOLE MAST ASSEMBLY
1. Locate the Console Mast and Console Mast Cover and slide the Cover onto the Mast
as far as it will go. Make sure the Console Mast Cover is facing the correct way.
2. At the top opening of the Main Frame of the elliptical is a Computer Cable. Unravel and
straighten out the Computer Cable and feed it into the bottom of the console mast tube
and out of the top opening.
3. Install the Console Mast into the receiving bracket in the top of the Main Frame.
Put the 4pcs of 5/16"x 23 x1.5T Flat Washers onto the 4pcs of 5/16" x 15m/m Hex
Head Screws and the 2pcs of 5/16´ x 23 x 2T Curved Washers onto the 2pcs of 5/16" x
15m/m Hex Head Screws. Install, and hand tighten by using the 12m/m Wrench.
NOTE: There is a electrical wire running through the Console Mast Tube.
Be careful not to damage or pinch this Computer Cable during this procedure.
4. Locate the Console and the 4 pcs of M5 x 10m/m Phillips Head Screws.
5. There will be three electrical wire connectors at the top opening of the Console Mast,
two 2 pin Hand pulse Cables, one Computer Cable. Connect these to the mating
connectors on the back of the Console. The connectors are keyed so you cannot plug
them in the wrong way so do not force them. The 2 pin Hand pulse Cables are both the
same. It does not matter how you connect them.
6. Storing the excess wire back into the Console Mast, carefully install the Console onto
the mounting plate of Console Mast and secure using the 4 pcs of M5 x 10m/m Phillips
Head Screws.
STEP 2: HANDLE BAR ASSEMBLY
1. Install the 2 pcs of 17m/m Wave Washers onto the Left and Right side of the Handle Bar
axle.
2. Slide the Lower Left and Right Handle Bars onto the appropriate side of the axle.
3. Put the 2 pcs of 5/16" x 23 x 1.5T Flat Washers onto the 2 pcs of 5/16" x 15m/m Hex
Head Screws and install, and tighten, in the threaded holes in the ends of the axle.
4. Install the Left and Right Handle Bars into the Lower Left and Right Handle Bars with
6pcs of 5/16 x15m/m Button Head Socket Screws by using the Combination M5 Allen
Wrench & Phillips Head Screw Driver.
5
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3: CONNECTING ARM ASSEMBLY
1. Align the hole in the end of the Connecting arms (L&R)(pivoting rod end) with the hole
in the bracket of the Lower Handle Bars (L&R). The rod end should be on the inside of
the Lower Handle Bars (L&R) bracket. Take 2pcs of 5/16" x 1-1/4" Hex Head Screws
and install it through the Lower Handle Bars (L&R) bracket and the rod end. Install
2pcs of 5/16" x 20 x 1.5T Flat Washers, 2pcs of 5/16" x 7T Nyloc Nuts tighten firmly
using the 12m/m Wrench on the 5/16" x 7T Nyloc Nut and one on the 5/16" x 1-1/4"
Hex Head Screw.
2. Install the 2 pcs of Rails into the receiving bracket in the end of Main Frame with 2 pcs
of 3/8´ x 2-1/4´ Button Head Socket Screws, 2pcs of 3/8" x 19 x 1.5T Flat Washers and
2 pcs of 3/8" x 7T Nyloc Nut by using 2 pcs of 13/14m/m Wrench.
3. Put the Lug Covers (L&R) onto the Rail Strap. Slip the Rail Strap through the slots in the
Lug Covers, then Install onto the Rails with 2 pcs of 5/16´ x 3/4´ Button Head Socket
Screws and 2 pcs of 5/16" x 20 x 1.5T Flat Washers by using Combination M5 Allen
Wrench & Phillips Head Screw Driver.
STEP 4: PLASTICS ASSEMBLY
1. Install the Connecting Arm Covers (L & R) over the connection of the rod end and
Lower Handle Bars (L & R) with 4pcs of M5 x 15m/m Phillips Head Screws and 2pcs of
3.5x12m/m Self Tapping Screws by using the Combination M5 Allen Wrench & Phillips
Head Screw Driver.
2. Install the 2pcs of Wheel Covers using the 4pcs of M5x15m/m Phillips Head Screws.
3. Install the Front Handle Bar Cover (L & R) and Rear Handle Bar Cover (L & R) over the
Handle Bars axle connections with the 6 pcs of 3.5x12m/m Self Tapping Screws by
using Phillips Head Screw Driver.
PLEASE ENSURE ALL FASTENERS ARE TIGHT AFTER THE COMPONENTS HAVE
BEEN ASSEMBLED.
POWER CONNECTOR LOCATED ON
FRONT, LEFT HAND SIDE OF UNIT.
6
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Assembly drawing
step 1
7
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
step 2
8
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
step 3
9
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
step 4
10
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Transportation
The elliptical is equipped with two transport wheels which are engaged when rear of
XE Series Elliptical is lifted.
Operation of Your Elliptical
Getting familiar with the control panel
Starting a program
Quick Start
After the console powers up you may press the Start key to begin, this will initiate the Quick Start
mode. In Quick Start the Time will count up from zero and the workload may be adjusted manually
by pressing the Up/Down buttons. Distance and Calories will accrue, starting from zero.
The Calorie window will switch between Calories and Watts every 5 seconds. The Calorie reading
shows total Calories burned and is an approximate number. The Watt reading indicates how much
work you are doing. If the Watt reading is 100, this means you are doing enough work to light a
100 watt light bulb.
The bottom left data window will switch between RPM and Speed every 5 seconds. RPM is your
actual pedal rotation speed, and the Speed readout is in MPH, indicating approximate road speed
as if pedaling a bicycle in 7th gear.
The Distance window shows distance traveled, based on pedal speed, in miles. The Pulse window
will display your heart rate in beats per minute if you are holding the heart rate hand sensors, or
wearing a chest strap transmitter.
11
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual
Using the Up/Down keys, highlight the Manual icon at the top of the display and press Enter key.
The profile will be blinking and you may use the Up/Down keys to adjust the program work level
and then press Enter. The Time window will now be blinking. Use the Up/Down keys to adjust the
program Time and then press Enter. The Distance window will now be blinking and you can adjust
a target Distance using the Up/Down keys then press Enter. Calories will now be blinking, repeat
the same process as above to set, then press Enter. The Watt icon will be blinking. If you choose
to set the Watts then the machine will automatically adjust the workload to maintain continuous
work. What this means is that if you set the Watt to 100 the machine will try to keep you working at
a rate of work that equals 100 Watts (or working at a rate that will keep a 100 Watt light bulb
burning). Watts are determined by the amount of work you are doing. On the Elliptical this means
the speed you are pedaling at combined with the workload of the machine. In Watt mode, if you
change your speed the machine will automatically change the workload to maintain the same Watt
level. If you pedal faster the workload will decrease and if you pedal slower the workload
increases.
After adjusting all the parameters, press Start to begin your workout.
Preset Programs
There are 12 preset programs to choose from. After power up, or reset, press the Up/Down keys to
highlight the Program icon. Press the Enter key to enter the program mode. The display will show
P1, for two seconds, then change to the P1 program profile. You may keep pressing the Up/Down
keys to scroll through the 12 programs. When you see a program you want, press the Enter key to
enter. At this point you may press start to begin the program with the default settings or you may
customize the program.
To customize the work level, press the Up key. You will see the profile increase in size. When the
work level is where you like it press the Enter key (If you do not want to customize the profile, just
press the Enter key to bypass).
The Time window will now be blinking. Use the Up and Down keys to adjust the workout time and
then press Enter.
The Distance window will now be blinking. Repeat the same process to set the distance to count
down, if desired, and press Enter.
The Calorie window will now be blinking. Repeat the same process then press Enter.
The Pulse window will now be blinking. Entering a Pulse number will set an alarm that will beep
when your heart rate reaches the programmed number to let you know you have reached your
target.
Once you have set the data you may press Start to begin the program. You may also press Start at
any time during the programming to begin. Any data that is not programmed at that point will count
up from zero.
When the program ends there is a series of audible beeps. You may press Start to restart the
program or press Reset to return to the start-up screen.
12
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
User Program
This mode allows you to build and save your own custom program.
Press the Up or Down key until the User icon at the top of the display is blinking then press Enter.
The first column of the profile will be blinking. Use the Up/Down keys to adjust the work level then
press Enter. The second column will now be blinking. Repeat the same process as above and
press Enter. Repeat this process until all the columns are adjusted to your liking. All the settings
will be saved as a custom program.
Target HR
This program allows you to set a target heart rate and the machine will automatically adjust the
work load to safely reach the target and maintain that target.
Use the Up/Down keys to select the Target HR program and press Enter. The display will show a
number and the age icon at top will be blinking. Use the Up/Down keys to adjust the age and press
Enter. The display will now show a blinking percent number or the letters THR.
You may use the Up/Down keys to choose either 55%, 75%, 90% or THR. The percentage
choices will automatically set the target to a percent of your maximum heart rate, based on your
age. This is why it is important to adjust the age properly. The console will use a formula to
determine the correct percentage: 220 ± age = maximum HR. For example a 30 year old persons¶
Max HR is 190 BPM (220 ± 30 = 190 BPM). If the 30 year old wants to work at 75%, their target
HR will be 142BPM.
If you want to choose to work at 75% - for example - then use the Up/Down arrows to highlight
75% and press Enter. Now the Time window will be blinking and you can program it and other data
the same as other programs. If you want to set your own custom Target HR then use the Up/Down
arrow to highlight THR and press Enter. The Pulse window will now be blinking. Use the Up/Down
arrows to set your own Target HR and press Enter to continue.
Recovery
Used to measure how fast your heart rate (HR) recovers from exercise. The faster your HR returns
to normal from exercise level, the better aerobic shape you are in. Pressing the recovery button
will start a 60 second count down. Hold the hand pulse sensors and do not exercise during the
count down. At the end of the 60 seconds a score will be displayed ranging from F1 to F6 with F1
being the highest score and F6 being the lowest.
13
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
FUNCTIONS
TIME:
Count up: accumulates training time from zero to 99:59.
Count down: counts down from preset time to zero.
SPEED/ RPM:
DISTANCE:
CALORIES:
Automatically toggles between SPEED and RPM every 6 seconds. Speed is in
miles per hour (or kilometers per hour)
Count up: accumulates training distance from 0.00 to 99.99 miles.
Count down: counts down from preset distance to zero.
Accumulates calories burned from 0 to 9999. This is an estimated number only
to be used from workout to workout to compare your progress. Actual calorie
burn cannot be measured accurately on any consumer exercise equipment
because every individual burns calories at a different rate.
WATTS:
PULSE:
Indicates the amount of work being done in Watts.
Displays your current heart rate when you grasp the hand sensors or wear the
chest strap transmitter.
LEVEL:
Shown next to the workout profile. Indicates the level of work being done from 1
to 16.
14
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer’s Limited Warranty
Effective September 15, 2006
ELLIPTICAL WARRANTY
Spirit Manufacturing Inc. warrants all its elliptical parts for a period of 2 years from the date of retail sale, as determined by sale receipt, or in the
absence of a receipt eighteen (18) months from the original factory shipping date, Spirit¶s responsibilities include providing new or remanufactured
parts, at Spirit¶s option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or service
organization, these warranties will be administered by Spirit directly to a consumer. An extended warranty period applies to the following
components:
Labor
Frame Weldments
All Other Components
1 Year
Lifetime
3 Years
NORMAL RESPONSIBILITIES OF THE CONSUMER
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the original purchase to
validate the manufacturer¶s limited warranty.
2. Proper use of the elliptical in accordance with the instructions provided in this manual
3. Proper installation by an authorized Spirit service company in accordance with instructions provided with the elliptical and with all local electric
codes.
4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections or defects in house
wiring.
5. Expenses for making the elliptical accessible for servicing, including any item that was not part of the elliptical at the time it was shipped from the
factory.
6. Damages to the elliptical finish during shipping, installation or following installation.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES
RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or
exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or
defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call
reimbursement period, for elliptical not requiring component replacement, or elliptical not in ordinary household use.
3. Damages caused by services performed by persons other than authorized Spirit service companies; use of parts other than original
Spirit parts; or external causes such as alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts
of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been sold, transferred, bartered, or given to a third party.
6. Products that do not have a warranty registration card on file at Spirit Mfg. Spirit reserves the right to request proof of
purchase if no warranty record exists for the product.
7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE WARRANTIES OF
MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
SERVICE
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory
shipping as determined by the serial number establishes the warranty period should service be required. If service is performed,
it is in your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have
other rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized Spirit dealer. OR
2. Contact your local authorized Spirit service organization.
3. If there is a question as to where to obtain service, contact our service department at (870) 935-1107.
4. If no local service is available, Spirit will repair or replace the parts, at Spirit¶s option, within the warranty period at no charge
for parts. All transportation costs, both to our factory and upon return to the owner, are the responsibility of the owner. The owner is responsible for
adequate packaging upon return to Spirit. Spirit is not responsible for damages in shipping. Make all freight damage claims with the appropriate
freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION NUMBER. All units arriving without a return
authorization number will be refused.
5. For any further information, or to contact our service department by mail, send your correspondence to:
Spirit Manufacturing, Inc.
P.O. Box 2037
Jonesboro, AR 72402-2037
Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by
Spirit Manufacturing, Inc. This warranty applies only in the 50 states of the U.S.A. and Canada.
15
XE Series Elliptical
Download from Www.Somanuals.com. All Manuals Search And Download.
|