DVR-IP4CF
U S E R M A N U A L
Speco Technologies
200 New Highway
Amityville, NY 11701
631-957-8700
DEFAULT PASSWORD : 111111
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3.8 RESOLUTION SETTING .......................................................................................48
9.3.9 ADVANCE SETTINGS ..........................................................................................48
9.4. CONFIGURATION .................................................................................................48
9.4.1 SYSTEM SETTING ..............................................................................................48
9.4.2 USER SETTING ..................................................................................................49
9.4.2.1 USER AUTHORIZATION SETTING......................................................................49
9.4.2.2 NEW USER/ CHANGE PASSWORD......................................................................50
9.4.2.3 DELETE USER.................................................................................................50
9.4.3 NETWORK SETTING ...........................................................................................50
9.4.3.1 FIXED IP........................................................................................................50
9.4.3.2 DHCP ...........................................................................................................51
9.4.3.3 CONNECT TO ADSL BY PPPOE MODE..............................................................51
9.4.4 DDNS SETTING ................................................................................................52
9.4.5 FIRMWARE UPDATE...........................................................................................54
10. CF Card/ HDD Player Software Description......................................................... 56
11. TROUBLESHOOTING ............................................................................ 62
12. SPECIFICATIONS .................................................................................. 63
The author assumes no responsibility for any errors or omissions that may appear in this
document nor does it make a commitment to update the information herein.
V1.0 P/N:%040605-CS1
2
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
1. SAFETY PRECAUTIONS
CAUTION
RISK OF ELECTRIC SHOCK.
DO NOT OPEN!
CAUTION :
TO REDUCE THE RISK OF ELECTRICAL SHOCK,
DO NOT OPEN COVERS (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
It is advised to read the Safety Precaution Guide through carefully before operating the
product, to prevent any possible danger.
WARNING: Alert the user to the presence of un-insulated “dangerous voltage”.
CAUTION: Alert the user the presence of important operating and maintenance
(Servicing) instructions in the literature accompanying the
appliance.
The power cord is the main power connection. Therefore, constantly plug and unplug
of the power cord might result in malfunction of the product.
Do not install the product in an environment where the humidity is high.
Unless the product is waterproof or weatherproof, otherwise poor image quality may
quality.
Do not drop the product or subject them to physical shocks.
Except for vandal-proof or shockproof product, otherwise malfunctions may occur.
Never keep the product to direct strong light.
It can damage the product.
Do not spill liquid of any kind on the product.
If it gets wet, wipe it dry immediately. Alcohol or beverage can contain minerals that corrode the
electronic components.
Do not expose to extreme temperatures.
Use the product at temperatures within -10∘C ~ +50∘C.
3
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
2. INTRODUCTION
2.1 Product Introduction
This world leading technology is perfect for office safety, personal home
security, public environments, industrial surveillance, schools, and so on. It features
quick and simple installation and is the best choice for your own ultimate protection.
This state-of-the-art 4-channel digital recording system is equipped with an
advanced embedded CPU operating system and powerful M-JPEG compression
technology. Standalone type DVR system that is based on embedded an OS,
replacing the conventional DVR. The most user-friendly surveillance System can
operate the functions by controlling the front panel, using time and event to playback
recorded materials, efficient live recording and playback functions, convenient CF
card function that supports ATA HDD, and the most useful storage device of
removable Hard Disc Drive. Password protection on remote controlling. What more
can you expect!
2.2 Application
z Security:
ATM, bank, gas station, shop, home and parking lot.
z Factory/ Office:
Factory, warehouse, remote technology support, conference room, and outdoor
parking lot.
z Education/ Military/ Government Organization:
Important facilities, important areas, rapid transit system, and railroad safety.
z Recreation/ Activities:
Sports and news broadcast.
z Home:
Elevator, doorway, community safety, and hotels.
z Hospital/ Kindergarten:
Hospital and isolated ward, home for the aged, kindergarten, and Day Care center.
4
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
3. FEATURES
z Auto video input detection
Auto detects video input (NTSC/ PAL) and supports combined use of color and
b/w cameras.
z Supports high quality digital video recording
Adopts M-JPEG compression technology (NTSC: 30fps/ PAL: 25fps).
z Video Size
Video Resolution
• NTSC: 640x 224
• PAL: 640x 272
Monitoring Resolution
• NTSC: 720x 480
• PAL: 720x 576
z Replaces a conventional VCR.
Stores video on hard disks instead of VCR tapes. Large disk capacity, there is no
need to replace the recording medium.
z Built-in motion detection function.
Motion detection sensitivity rate may be setup under motion detection function.
z High efficient event recording, saving storage capacity.
Motion detection function enables recording only when system detects motion,
thus increases the amount of time available for recording.
z Easy access to the desired record.
Time & date search supports instant retrieval of images and alarm event search
makes searching simpler.
z Data can be stored in CF card.
Cards inserted in the CF card slot makes it easier to back up recordings and
transfer images to a PC.
z Removable hard disk box.
Removable hard drive mechanism allows you to backup important data with ease.
z Live monitoring through Internet from anywhere.
Built-in TCP/ IP network interface (auto detects and switches to 10/ 100Base T).
5
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
4. PACKING LIST
Check to make sure all of the items shown below are included in your product
package. If something is missing, contact your dealer as soon as possible.
(1)DVR (digital video recorder)
(2)Power adapter
(3)Power Cord
(4) User Manual
(5) CD-ROM
6
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
5. INSTALLATION
5.1 Connectors on the Rear Panel
Please setup the connection by following the illustration shown below:
7
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
6. NAME and FUNCTION of EACH PART
6.1 Front Panel Buttons and Controls
1. Removable HDD Box
2. Front Panel Button Definition
Press this button under monitoring or quad mode to show quad
(2) QUAD
(3) CH 1
(4) CH 2
(5) CH 3
(6) CH 4
(7) SEQ
:
:
:
:
:
:
:
display.
Press this button under monitoring or record mode to show
CH 1 in full-screen.
Press this button under monitoring or record mode to show
CH 2 in full-screen.
Press this button under monitoring or record mode to show
CH 3 in full-screen.
Pres this button under monitoring or record mode to show
CH 4 in full-screen.
Press this button under monitoring or record mode. All
channels are displayed full-screen in turn repeatedly.
Press this button under monitoring mode to enter setup
menu and under setup mode to return to the previous
selection.
(8) MENU
(9) ENTER
: Press this button to confirm after data input.
: Press this button to move the cursor up or down.
(10) UP/ LEFT
(11) DOWN/ RIGHT : Press this button to move the cursor left or right.
(12) REC LED
: LED lights while recording.
8
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
(13) PLAY LED
(14) MENU LED
(15) STOP LED
(16) REC
: LED lights while playing playback.
: LED lights when entering setup menu.
: LED lights when entering stop mode.
: Press this button under monitoring mode to start recording.
: Press this button under playback to return to start monitoring.
: Press this button under playback to pause playback.
: Press this button under playback to start reverse scanning.
: Press this button under playback mode to start playback.
(17) STOP
(18) PAUSE
(19) REW
(20) PLAY
Press this button under playback mode to start fast-forward
scanning.
(21) F.F.
:
(22) CF-CARD SLOT
9
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Rear Panel Buttons and Controls
(1) RJ45: Internet connection terminal
(2) Video Input [VIDEO IN]: Connect to cameras.
(3) DC 12V (4A) [Power Input terminal]: Power socket.
(4) S-Video Output [S-VIDEO OUT]: Connect to the monitor.
(5) Video Output [VIDEO OUT]: Connect to the monitor.
(6) Video Loop [VIDEO LOOP THROUGH].
(7) I/O Block [I/O BLOCK]: Terminal function description is shown below.
No.
Name
GND
Function
Ground Terminal（signal）
Alarm Input Terminal
1
2
ALARM 1
GND
Ground Terminal（signal）
Alarm Input Terminal
3
4
ALARM 2
GND
Ground Terminal（signal）
Alarm Input Terminal
5
6
ALARM 3
GND
Ground Terminal（signal）
Alarm Input Terminal
7
8
ALARM 4
N.O.
9
Alarm Output (Normal Open)
Alarm Output Terminal (NC/ NO COM)
Alarm Output (Normal Close)
10
11
COM
N.C.
(8) Cooling Fan.
10
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
7. OPERATING PROCEDURE
7.1 Power On
When powered on, the DVR will auto-detect its peripherals (self-testing, warm-up,
auto detects the hard disk and starts CF-card testing, and etc.)
The system will detect the video input and judge whether the video system is
NTSC or PAL. When video input is unable to be detected (VIDEO LOSS), the
system will send out an alarm, press any button to stop the alarm (it will not affect
the actual recording). Always connect cameras to the DVR before powering up to
properly detect the cameras.
7.2 Monitoring Mode
This mode is the default for our system after power on. Under this mode, system
supports live view for monitoring. Press《REC》button, the system enters the record
mode, pres《s PLAY》button to start playback, pres《s MENU》button to enter the menu
setup display. During record or playback, press《STOP》button to stop the current
activity and returns to monitoring mode. Under the main menu, press《MENU》 to
return to monitoring mode.
During playback, press《STOP》button to return to monitoring mode. Press FF
to change the speed (FF1, FF2 or FF3), or press《REW》button to start reverse
playback.
~ To reset the DVR to factory defaults (under quad or single display), press
《PAUSE》button 5 times, the message《ALL SETTING DATAIS INITIALIZED.》
will be displayed by flashing 3 times, and after reset the password will be set as
default value (111111).
~ When the reset procedure has been completed, the message“DVR RESET
COMPLETED. TURN THE DVR ON & OFF＂will be displayed, then please
restart the DVR.
11
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Record Display
Note:CH1: No block figure next to CH1 indicates that it is not recording.
EACH: Record Type QUAD: Record Type
(T): TIMER RECORD (A): ALARM RECORD (M): MIX RECORD
(□): Currently under recording.
VIDEO LOSS: Video input unable to be detected.
CAMERA1: Name for CH 1.
OFF: Channel is set to “OFF”.
12
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
7.4 Playback Display
TIME SEARCH
HARD DRIVE: MASTER
03/11/27 18:20:42 - 03/11/27 19:32:32
>01 TIME 2003/11/27 18:20:42
02 TIME 2003/11/27 16:43:56
03 TIME 2003/11/27 15:07:11
(<,>) MOVE (ENTER)CHANGE (PLAY)PLAY
(MENU) EXIT (FF)SELECT EVENT OR TIME
>01 TIME
Total 7
>07
1. Press《STOP》button to stop recording, then press《PLAY》button to enter the search .
2. Pres《s FF》button, then《PLAY》button to playback data from old to new. Use
《↑》and《↓》button to move the cursor to the desired playback time, press
《PLAY》button to start playback.
3. When you wish to view recorded videos of a specific time, use《FF》button,
《↑》or《↓》button, and 《ENTER》button to make changes.
4. In playback press《PAUSE》button to pause and press《PLAY》button to play.
5. Press《FF》button to fast-forward playback.
6. Press《REW》button to reverse playback.
7. Press《STOP》button to stop playback.
13
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
7.5 Note!
1. “Auto Sequence” function operates only during recording and under live status
(Dwell Time: 5 seconds). Sequencing will bypass a channel with video loss if
programmed accordingly (Example: Video Loss occurs on CH3, sequencing
order: CH1→CH2→CH4→QUAD).
2. To deactivate “Auto Sequence” function, press 1, 2, 3, 4, or QUAD.
3. Withdrawing the CF card, each time before the system (DVR) enters recording
or playback status, it auto detect the hard disk (detection time is about 5 seconds
- WD brand hard disk is about 30seconds).
4. When coping data from the hard disk to a CF card, make sure that the data has
been completely copied onto the CF card before withdrawing it from the slot.
Otherwise an error may occur. The system displays “CF CARD REMOVED”,
and auto returns to live display.
5. Camera name may only be viewed during recording display and under live display.
14
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8. SYSTEM SETUP
8.1 Menu
（1）
(3) > SYSTEM SETUP
CAMERA SETUP
(2)
RECORD SETUP
BUZZER SETUP
EVENT LIST
CF CARD SETTING
HARD DRIVE SETUP
(4) PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
(1) MAIN MENU: Item subject (First menu layer does not have a subject).
(2) Menu Layer Indication: The device consists of four menu layers.
■
：First Menu Layer (Main Menu)
：Second Menu Layer
：Third Menu Layer
■■
■■■
■■■■
：Fourth Menu Layer
(3) Menu Operation and Setup
Press《←》or《→》button to move the cursor ( > ).
Press《ENTER》button enter the sub menu.
Press《MENU》button:
ꢀ Under second or third menu layer, the system will return to the previous
menu layer (second layer to first layer or third layer to second layer)
and auto updates the modified data.
ꢀ Under main menu (first menu layer), the system will enter live mode.
Press《ENTER》button, to increase or decrease the setting values that has
been highlighted.
(4) Menu Layer Operation Guide
15
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 System Setup
SYSTEM SETUP
■■
>
TIME SET
PASSWORD SET
LOARD DEFAULT
VERSION
V1.0
PRESS(< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit “System Setup”.
5. “System Setup＂is situated on the second menu layer. Under this menu layer user
may setup the system time, password, and return system to default value, etc
(VERSION displayed represents the FIRMWARE version).
16
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.1 TIME SET
TIME
■■■
2005/01/11 17：23：06
^
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (^) position indicates the current time and date selected.
2. Use《←》or《→》button to move the cursor.
3. Use《ENTER》button to setup time and date.
4. Use《MENU》button to exit “Time Setup”.
17
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.2 PASSWORD SET
PASSWORD SETUP
■■■
> PASSWORD CHANGE
MENU PASSWORD
STOP REC PASSWORD
OFF
OFF
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Use《←》and《→》button to move the cursor to the desired item .
3. Use《ENTER》button to make changes.
4. Use《MENU》button to exit “Password Setup”.
5. When the password is setup to “ON”, user will be requested to enter the
correct password for entering from live display to menu selection (Default
Password: 111111).
6. When password is setup to “ON”, user will be requested to enter the correct
password to stop recording (Default Password: 111111).
18
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.2.1 PASSWORD CHANGE
■■■■
CURRENT PASSWORD ：_ _ _ _ _ _
NEW PASSWORD ：_ _ _ _ _ _
CONFIRM PASSWORD ：_ _ _ _ _ _
PRESS (MENU) TO EXIT
1. Press《ENTER》button to show the display above.
2. Enter the current password (CURRENT PASSWORD).
3. Enter new password (NEW PASSWORD).
4. Confirm the new password (CONFIRM PASSWORD).
5. When password change is successful, the system will display “PASSWORD
CHANGED”.
※ Default Value: 111111
If password entered is incorrect, you will receive a message “NO
PASSWORD CHANGED” to inform you (message flashes three times) and
the system returns to “Password setup” selection.
19
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2.3 LOAD DEFAULT
■■■
PRESS (ENTER) TO RESET
PRESS (MENU) TO EXIT
1. Press《ENTER》button to show the display above.
2. Press《ENTER》button the message《ALL SETTING DATA IS INITIALIZED》
will be displayed by flashing 3 times, and returns to default value. When reset
procedure has been completed, the message“DVR RESET COMPLETED
TURN OFF AND ON THE DVR＂will be displayed, please restart the DVR.
3. Press《MENU》button to exit “Load Default Setup” selection.
20
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3 Camera Setup
CAMERA SETUP
■■
>
CAMERA ENABLE
CAMERA TITLE
CAMERA SETTING
CH1 TITLE
CH2 TITLE
CH3 TITLE
1234
----
CAMERA1
CAMERA2
CAMERA3
CAMERA4
CH4 TITLE
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit.
5. “Camera Setup” is situated on the second menu layer. Under this menu layer
user may setup camera name (camera name for CH1, CH2, CH3 and CH4),
standard camera setup, etc.
6. Pres《s ENTER》button to change the camera view combination (select to view
the desired channel).
(It consists of 16 different optional camera view combinations)
1) Select (- - - -), all cameras are disabled (no image display).
2) Select (1 2 3 4), all cameras are operational (quad image display).
3) Select (- - - 4), only camera four is operational (CH4 image display only).
7. When proceeding “CH1 TITLE”, pres《s ENTER》button to show the display
21
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
below:
V
CH1 TITLE
CAMERA1
12345678
“V” indicates the position of the cursor. Press《←》and《→》button to move the
cursor, and press《ENTER》button to change the title (maximum 8 characters).
8. All channel titles are setup the same way.
Once the user formats the hard disk drive, the camera title returns to its default
setting (CAMERA1/ CAMERA2/ CAMERA3/ CAMERA4). It is because this
setup is stored in the hard disk drive.
22
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.3.1 CAMERA SETTING
CAMERA SEUP
> CAMERA SELECT
RECORD ENABLE
MOTION DETECTION
MOTION SENSITIVITY
HUE
■■■
CH1
ON
ON
03
08
CONTRAST
08
BRIGHTNESS
08
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor to the desired item.
3. Press《ENTER》button to make changes.
4. Press《MENU》button to exit “CAMERA SETUP” selection.
5. CAMERA SELECT: Press《ENTER》button to select the desired channel.
6. RECORD ENABLE: Press《ENTER》button to switch the channel recording ON/ OFF.
7. MOTION DETECTION: Press《ENTER》button to switch the motion detection
function ON/ OFF.
8. MOTION SENSITIVITY: Press《ENTER》button to setup the motion sensitivity
rate (5 sensitivity rate values, 01 most sensitive).
9. HUE: Pres《s ENTER》button to adjust the color of cameras (15 color adjustment
values, default value: 08 ).
10. CONTRAST: Pres《s ENTER》button to adjust the camera contrast (15 contrast adjustment
values, default value: 08).
11. BRIGHTNESS: Press《ENTER》button to adjust camera brightness (15 color adjustment
values, default value: 08 ).
23
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.4 Record Setup
RECORD SETUP
■■
> RECORD TYPE
VIDEO QUALITY
EACH
NORMAL
TIME RECORD FRAMERATE
MOTION RECORD FRAMERATE
SENSOR RECORD FRAMERATE
ALARM REC TIME
04
15
15
10
RECORD MODE
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Use《←》and《→》button to move the cursor to the desired item.
3. Use《ENTER》button to make changes.
4. Use《MENU》button to exit “RECORD SETUP” selection.
5. “Record Setup” is situated on the second menu layer. Under this selection user may
setup the following function: Record Type, Video Quality, Time Record Framerate,
Motion Record Framerate, Sensor Record Framerate, Alarm Record Time, and Record
Mode.
6. RECORD TYPE: Press《ENTER》button to select between “QUAD” and
“EACH” mode.
7. VIDEO QUALITY: Press《ENTER》button to select different quality recordings
(HIGH, NORMAL or LOW).
8. TIME RECORD FRAMERATE: Press《ENTER》button to setup the
recording speed when “T” mode is setup under schedule record mode.
9. MOTION RECORD FRAMERATE: Press《ENTER》button to setup
24
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
different recording speeds per channel, suitable when the recording speed
under schedule record mode is setup to “M” (mix) or “A” (alarm).
10. SENSOR RECORD FRAMERATE: Press《ENTER》button to setup different
recording speed, when a sensor device has been triggered (this setup is only
active when the recording speed under schedule record mode is setup to
“M”(Mix) or “A” (Alarm)).
NTSC:30,15,10,7,5,4,3,2,1fps.
PAL :25,12,8,6,4,3,2,1fps.
11. ALARM REC TIME: Press《ENTER》button to setup sensor recording time
after a sensor device has been triggered (this setup functions is only active
when the recording speed under schedule record mode is setup to
“A”(Alarm)).
8.4.1 RECORD MODE
■■■
RECORD MODE
T: TIME A: MOTION+SENSOR
M: TIME+MOTION+SENSOR
V
< M A T T T T T T T T T T T T T T T T T T T T－T >
0
3
6
9
12
15
18
21
24
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
25
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Cursor (V) position indicates the current function selected.
2. Use《←》and《→》button to move the cursor to the desired item (time).
3. Use《ENTER》button to make changes.
4. Use《MENU》button to exit “SECHDULE RECORD MODE” selection.
5. T: Time, indicates continuous record.
6. M: TIME+MOTION+SENSOR.
(1) When motion has been detected, it will be recorded by “Motion Record
Speed”.
(2) When sensor has been triggered, it will be recorded by “Sensor Record
Speed”.
(3) Otherwise, it is recorded by “Time Record Speed”.
7. A: MOTION+SENSOR
(1) When motion has been detected, it will be recorded by “Motion Record
Speed”.
(2) When sensor has been triggered, it will be recorded by “Sensor Record
Speed”.
※ When both “MOTION” and “SENSOR” has been triggered, it will be
recorded by “Motion Record Speed”.
26
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.5 Buzzer Setup
BUZZER SETUP
> ALARM ALERT
VIDEO LOSS ALERT
HDD FULL ALERT
BUZZER TIME
■■
ON
ON
ON
05
RELAY OUT TIME
SENSOR TYPE
05
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current selected position.
2. Press《←》and《→》button to move the cursor to the desired item (time).
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit “BUZZER SETUP” selection.
5. “BUZZER SETUP＂is situated on the second menu layer. Under this menu
layer user may setup “ALARM ALERT”, “ VIDEO LOSS ALERT”, “ HDD
FULL ALERT”, “ BUZZER TIME”, “ RELAY OUT TIME”, and
“ SENSOR TYPE”.
6. ALARM ALERT: Press《ENTER》button to setup “ON” or “OFF”, whether
to trigger the alarm when motion event has been detected (this setup is only
active when the system is under record status and schedule record is setup to
“M”(Mix) or “A” (Alarm)).
7. VIDEO LOSS ALERT: Press《ENTER》button to setup “ON” or “OFF”, whether
to trigger the alarm when video loss has been detected (this setup is only active
when the system is under record or live status).
8. HDD FULL ALERT: Press《ENTER》button to setup “ON” or “OFF”, whether
27
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
to trigger the alarm when hard disk is full (this setup is only active when the
system is under record status).
9. BUZZER TIME: Press《ENTER》button to setup the buzzer time to continuous
(CONT), and press any button to release this setup.
10. RELAY OUT TIME: Press《ENTER》button to setup the relay out time to
continuous (CONT), and press any button to release this setup.
8.5.1 SENSOR TYPE:
SENSOR SETUP
■■■
> CHANNEL-1
CHANNEL-2
CHANNEL-3
CHANNEL-4
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
NOT INSTALLED
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current selected position.
2. Pres《s ←》and《→》button to move the cursor to the desired item (CH1~CH4).
3. Press《ENTER》button to make changes.
4. Press《MENU》button to exit “SENSOR SETUP” selection.
5. CHANNEL-1: Press《ENTER》button to setup “NO” (Normal Open) or
“NC” (Normal Close).
6. CHANNEL-2 ~ CHANNEL-4: Please follow the setup shown above (CHANNEL-1).
28
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6 Event List
EVENT LIST
■■
>
TIME SEARCH
EVENT SEARCH
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to move the cursor to the desired item.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit “EVENT LIST” selection.
5. “EVENT LIST＂is situated on the second menu layer. Under this menu
layer user may setup “TIME SERACH” or “EVENT SEARCH”.
29
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6.1 TIME SEARCH
TIME SEARCH
■■■
05/01/13 19：27：16
BEGIN TIME：
END TIME：
05/01/13 19：27：16
05/01/15 15：00：06
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. TIME SEARCH: Displays system recording time (begin and end).
2. Press《←》and《→》button to select the desired time and date.
3. Press《ENTER》button to setup playback starting time and date.
4. Press《MENU》button to exit “TIME SEARCH” selection.
5. Press《PLAY》button to play.
30
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.6.2 EVENT SEARCH
EVENT SEARCH
END：
■■■
BEGIN：
05/01/15 15：00：01
05/01/15 15：00：06
> 01 ALARM
02 MIX
03 TIME
2005/01/15 15：00：01
2005/01/15 14：00：01
2005/01/15 13：00：01
2005/01/15 12：00：01
04 ALARM
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. EVENT SEARCH: Displays all recording events, every page consists of 7
events, and maximum 63 stored events.
2. Press《←》and《→》button to select the desired event to playback.
3. Press《MENU》button to exit “EVENT SEARCH” selection.
4. Press《PLAY》button to play.
※
BEGIN：
END：
05/01/15 15：00：01
05/01/15 15：00：06
Displays the beginning and end time of each event.
31
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7 CF Card Setup
CF CARD SETUP
■■
>
COPY
FORMAT/ERASE
TOTAL CAPACITY
512MB
100MB
REMAINING CAPACITY
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to select the desired item.
3. Press《ENTER》button to proceed.
4. Press《MENU》button to exit “CF CARD SETUP” selection.
5.“CF CARD SETUP＂is situated on the second menu layer. Under this menu
layer user may setup to “COPY” or “FORMAT/ ERASE”.
6. TOTAL CAPACITY: CF Card total capacity (MB per unit).
7. REMAINING CAPACITY: CF Card remaining capacity (MB per unit).
8. When remaining capacity equals zero, indicates that there’s no storage space
available. Please format the CF Card (FORMAT/ ERASE).
※ Note! When the screen displays “NO CF CARD EXIST”, indicates that the
system can not detect the CF-card.
※ Note! Format the CF card (FORMAT/ ERASE) before first time use.
※ Please do not use the format (FORMAT) function supplied by the personal
computer, data may be lost due to such action.
32
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7.1 SELECT TIME
SELECT TIME
■■■
> DAY
05/01/15
15：00：01
15：00：06
BEGIN TIME
END TIME
COPY
PRESS (< >), THEN (ENTER)
PRESS (MENU) TO EXIT
1. SELECT TIME: Displays the newest event date, begin and end time.
2. Press《←》and《→》button to select the desired item.
3. Press《ENTER》button to setup the desired date and time to proceed copy
(COPY) function.
4. Press《MENU》button to exit “SELECT TIME” selection.
※ When the message “CF CARD FULL” is displayed on the screen, indicates
that storage capacity （CF Card） is empty. Please format (FORMAT/
ERASE) to proceed.
※ When the message “Time Input Error” is displayed on the screen, indicates
that the time date entered is incorrect or no data. The system auto returns to
CF Card setup selection.
33
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7.1.1 COPY
■■■■
(1) SELECT DATA：10MB
(2) ESTIMATED TIME：2 Minute
(3) START COPY
(4) CAPACITY IS NOT ENOUGH
(5) 10% COPIED
(6) PRESS (ENTER) TO COPY
(7) PRESS (MENU) TO EXIT
（1）Data capacity.
（2）Estimated time to complete data copy.
（3）Request to confirm copy.
（4）When the data capacity is greater than the remaining storage capacity, the
message “CAPACITY IS NOT ENOUGH” will be displayed.
（5）Data copy percentage completed.
（6）Press《ENTER》button to start copy.
（7）Press《MENU》button to exit “Copy Display”.
34
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.7.2 FORMAT/ ERASE
■■■
PASSWORD INPUT （6） ：------
1. When proceeding “FORMAT/ ERASE” function, the above display will be
shown.
2. When password entered is correct, the screen will display the message
“PASSWORD CORRECT”, “CF CARD FORMATED” (flashes 3 times),
indicates CF Card format is successful.
3. When password entered is incorrect, the screen will display “PASSWORD
INCORRECT” (flashes 3 times), and returns to “CF CARD SETUP”
selection.
※ This password equals to hard disk format password.
35
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.8 Hard Drive Setup
HARD DRIVE SETUP
■■
> DISK FULL
HDD SIZE
OVERWRITE
120103MB
13321MB
HDD USED
HDD FORMAT
11%
PRESS (< >), THEN (ENTER)
1. Cursor (>) position indicates the current function selected.
2. Press《←》and《→》button to select the desired item.
3. Press《ENTER》button to make changes or to proceed.
4. Press《MENU》button to exit “HARD DRIVE SETUP” selection.
5. “HARD DRIVE SETUP” is situated on the second menu layer. Under this
menu layer user may setup to overwrite or format the hard disk.
6. DISK FULL: Press《ENTER》button to setup “ON” or “OFF”, whether to
overwrite or stop recording when the hard disk is full.
7. HDD SIZE: Displays hard disk capacity.
8. HDD USED: Displays the capacity already used.
36
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
8.8.1 HDD FORMAT:
■■■
PASSWORD INPUT （6） ：------
1. When proceeding “HDD FORMAT” function, the above display will be shown.
2. When password entered is correct, the screen will display the message “HDD
FORMATTED” (flashes 3 times), indicates hard disk format is successful.
3. When password entered is incorrect, the screen will display “PASSWORD
INCORRECT” (flashes 3 times), and returns to “HARD DRIVE SETUP” selection.
37
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9. NETWORK OPERATION
9.1 Network DVR Setup
Before installing the Network DVR, you need to first setup an IP Address, connect it
to the ADSL Modem or LAN Hub, and use IPEdit.exe to test the DVR.
Note: Before using PPPoE and DDNS connection method, one must first setup an IP
Address (using IPEDIT.exe).
9.1.1 Online with DHCP Server
Use IPEDIT.exe to find the installed Network DVR. Select this Network DVR in the
Camera List Window. The default configuration will be shown on the right window.
Update the IP status.
Online with DHCP Server
38
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.1.2 Online without DHCP Server
1. Use IPEdit.exe to find the installed Network DVR.
2. The Internet DVR without IP allocated by DHCP will have a default IP
Address of 169.254.1.13.
3. Select this Internet DVR on Camera List Window.
4. The default configuration will be shown on the right window.
5. Under DOS mode enter “IPCONFIG” to access Gateway, IP, and Netmask
setting values.
Online without DHCP Server
After the “Submit” button is clicked, the IP information of this Network DVR
will be updated.
9.2 Connecting Network DVR
3 methods for connecting Network DVR:
1. Online using Intranet or Fixed IP
2. Online using ADSL (PPPoE) Router
3. Online using DDNS Server
39
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.2.1 Online using Intranet or Fixed IP
Setup similar to “9.1 Network DVR Setup” .
9.2.2 Online using ADSL (PPPoE) Router
Setup similar to “9.4.3.3 Connect to ADSL by PPPoE mode”.
9.2.3 Online using DDNS Server
The DDNS service provides the dynamic IP to users to gain access to resources
connected to the Internet via a cable or DSL connection. Once you’ve decided to
apply this function, please register your domain name at http://www.dyndns.org
(this website supports register free service). Paid DDNS service is applied to
long-term users. For more information, please refer to “9.4.4 DDNS Setup”.
9.2.4 Online Connection
Start Internet Explorer, enter the IP Address of the Network DVR into the Address
field, such as 192.168.1.31 or click twice on IPEdit.
Before connection, “User name” and “Password” will be requested:
Default User Name: admin
Default Password: 1234
40
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.2.4.1 Install ActiveX
Before entering remote connection, please install ActiveX and check your
browser setup by following the procedures below:
a. Open Internet Explorer under “Tools” and select “Internet Options”.
Tools Æ Internet Options
b. Select “Security”, and then press “Custom Level”.
Security -> Custom Level
41
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
Start-up ActiveX Control
42
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
The graphic below will be shown when first time installing ActiveX Mode. Please,
select “Yes” to accept installation.
Download ActiveX Control
Live view will be displayed when installation is successful.
43
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
Live display under ActiveX mode
9.3 Main Display
1
○
3
○
4
○
2
○
Remote control DVR - Main Menu
1
○Live Display
2
○DVR Control Button
3
○Video Setup
4
○Configuration: Enter detail setup
Recording: Displays recording setup menu (for video recording).
Snapshot: Pop-up window displays live images, right mouse click to save.
Note! To view complete interface, PC resolution must be adjusted to 1024*768.
9.3.1 Live Display
z
z
z
z
z
z
View/ Make changes on image display
Rotate/ Make changes on image direction
Image Recording/ Record function setup
Save Current Picture/ Save the current image
Welcome! Administrator/ Display current user name
About/ Version description
Move the cursor inside the image range, right mouse click to display 9 function selections:
44
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3.2 View
Two types of display method:
a.Resizable: Adjustable image size.
b.Actual size: The actual image size.
9.3.3 Rotate
Four types of rotate settings:
a.Rotate 0: Default state
b.Rotate 180: Rotate the image by 180 degrees.
c.Flip horizontal: Image flips horizontally
d.Flip vertical: Image flips vertically
45
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3.4 Image Recording
Image Recording Setup Display:
Save as JPEG: Save as picture file
Save as AVI: Save as AVI animation file
Save as JPEG:
No Limit: Unrestricted image storage (continuous).
Number: Image storage according to “number”.
Save interval: Image storage according to “1/10 second” (e.g.: Enter “10”, then 1
frame is stored per second. Enter “50”, then 1 frame is stored in 5 seconds).
Size: Image storage according to “size”.
Time: Image storage according to “time”.
Save Path: Image storage according to “Save Path”.
Pre Name: Image storage according to “Prefix Name”.
Save as AVI:
No Limit: Unrestricted image storage (continuous).
Number: Image storage according to “number”.
Save interval: Image storage according to “1/10 second” (e.g.: Enter “10”, then 1
avi file is stored per second. Enter “50”, then 5 avi files are stored in 5 seconds).
Size: Image storage according to “size”.
Frame Rate: Image storage according to “frame rate”.
Time: Image storage according to “time”.
Maximum Number of Frame in Each File: Image storage according to “maximum
frame”.
Save Path: Image storage according to “Save Path”.
Pre Name: Image storage according to “Prefix Name”.
46
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3.5 Save Current Picture
Select to save live images.
9.3.6 DVR Control Setup
Supports DVR remote control function (Please refer to 6-1 Front Panel Buttons
and Controls, on page 8).
9.3.7 Quality Setting
Network DVR provides 5 image quality settings. The user can select the quality
setting from the “Quality” list box.
z
z
z
z
z
Highest
High
Medium
Low
Lowest
47
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.3.8 Resolution Setting
Network DVR provides six resolution settings. The user can select the quality
setting from the “Resolution” list box.
z
z
z
z
z
z
176x144
160x120
320x240
352x288
640x480
704x576
Note! The device supports auto video system detection (NTSC/ PAL).
9.3.9 Advance Settings
Network DVR provides the advanced settings for the following:
z
z
z
z
Brightness
Contrast
Saturation
Hue
9.4. Configuration
Only the administrator can select the “Configuration”; the ordinary user account
does not have this privilege to access this function.
9.4.1 System Setting
The number on Port 1 and Port 2 may be changed, press “OK” button to save the
setting.
System Setting Display
48
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
z
Reboot DVR: The system need 20 seconds to reboot the DVR (Rebooting
does not effect the recording function).
z
z
FirmWare update (Please refer to 6.7).
ReStore Factory Default
9.4.2 User Setting
z
z
z
z
User Authorization Setting
Add User or Change Password
Delete User Account
Current Users
User Setting Display
9.4.2.1 User Authorization Setting
Select item “Needed” to enable user authorization function, then each time before
login to Network DVR the Login window will request for “Username” and
“Password”. To disable user authorization function, select item “No Need”.
49
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.4.2.2 New user/ Change Password
Enter a new user name and password information to create a new user account, or
enter an existing user account, then set a new password to replace the old
password, and select “OK” to create the account or change password. After
selecting “OK” button, the “Current User List” would display the newly created
user account.
9.4.2.3 Delete User
Enter the user account that you wish to delete, click “OK” to delete the account.
After selecting “OK” button, the selected user account will be deleted from the
“Current User List”.
9.4.3 Network Setting
9.4.3.1 Fixed IP
To setup follow the steps below:
1. Select item “Manually”.
2. Enter “IP Address”, “Subnet mask”, and ”DNS”.
3. Click “OK” button to save the setting.
Network Setting Display
50
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.4.3.2 DHCP
The “DHCP” is automatically set as the default network setting of the Network
DVR. When a Network DVR is connected into the LAN, it will issue DHCP
packets to request an IP address that is dynamically assigned by the DHCP server.
If it is unable to get a DHCP address on a limited tries, the Network DVR will
assign a default IP address such as “169.254.1.13”.
9.4.3.3 Connect to ADSL by PPPoE mode
To setup follow the steps below:
1. After setup, rebooting enables automatic connection to ADSL.
2. Enter the “Username” and “Password” fields with the account and password
provided by the ISP.
3. If item “Send mail after connected” is selected, the mail will be automatically
sent when connected to the ISP.
4. Click “OK” button to save the settings.
Note: In order to activate the function, it is necessary to reboot the device after the
setup.
1
2
ADSL Setting Display
If the Network DVR and ADSL modem are connected by a hub, the user can select
item “Dial On Power Up” to perform the connect operation. On contrary, if the
Network DVR and ADSL modem are connected directly, then please note the
following steps below:
51
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Power off Network DVR.
2. Connect Network DVR directly to the ADSL modem (using RJ-45 Ethernet port).
3. Power-up Network DVR.
4. Network DVR start dialing.
5. Once connected, mail the IP address information to the preset e-mail address.
6. After 10 times of connection failure, it aborts the operation and the user can
reconnect it by LAN to find the cause.
Note: If item “Send mail after connected” is selected, then the Network DVR will
send a mail that contains the message “Dial Up IP Address/ Netmask/
Gateway/ DNS Server” will be mailed to the preset e-mail address.
Connection Message Send to User
9.4.4 DDNS Setting
Press “DDNS” server connection to start-up the function. It can autonomously and
automatically contact DDNS provider service whenever the router detects that its
public IP address has changed. The router logs on to an account you setup and
maintain, and updates the account with its latest public IP address. You may
52
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
To setup follow the steps below:
2. Apply domain name.
3. Click the “Enable” button. Enter “UserName” and “Password” with
“DomainName”.
DDNS Setting
After registering the domain name, please enter the information supplied by the
administrator to the Network DVR DDNS Account Setting. Select “Enable” button
to start-up DDNS server, and press “Submit” button to save the setting.
53
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
9.4.5 Firmware Update
When new firmware (bin file) is supplied, you may update the new version
firmware (bin file) to your PC by following the procedures below:
Select the Firmware to be Updated
Uploading the Selected Firmware
Press “Upload” button to display the message below, and follow the instruction to
make the necessary setup.
(1)
(2)
Firmware Update
54
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
Press “here” button (1) to update Firmware. Press “here” button (2) to delete the
file. The message below displays the writing progress of the firmware update.
When Firmware update is completed, it will show 100%, and a message “Click
here to reboot DVR browser” will be displayed, requesting to restart the Network
DVR.
Firmware Update Display
Firmware Update Completed, prompt to restart the device.
55
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
10. CF Card/ HDD Player Software
Description
PC Player Software
System Requirement
※ OS (Operating System) Windows 2000/ XP or later.
※ Use your PC to install DirectX (version DirectX 7.0 or above).
※ Using remote control software, please setup the resolution to 1024x768 or above.
Hardware Requirement
※CPU 1.0 GHz or higher.
※RAM 256 Mbyte or higher.
1. Installation
A. Hardware Installation
Make sure that HDD or CF card is connected through IDE or USB interface to the
PC.
B. Software Installation
1. During installation, you will need a desktop or laptop computer that meets these
minimum requirements: Windows 2000 or XP.
2. Copy the PC Player Software to your PC (under any directory, e.g.: C:\ ). When
user start-up PC Player Software, it will auto create a directory “_config”, the
purpose is to store all parameter setup supplied by the PC Player Software.
2. Operation
Move the cursor to PC Player Software and double left mouse click to proceed.
When proceeding PC Player Software, it auto-detects the CF card or HDD (about 1
min. to auto detect, and may differ depending on file size).
Network DVR does not support player software other then PC Player software.
※
56
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Software Playback Interface Description
A. User Interface
Play System
System Status
Figure 1
When the system detects stored materials (HDD or CF card), the above graphic
(Figure 1) will be shown. User may operate the function buttons to make
necessary playback adjustment or store recordings onto the PC.
57
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
：
：
：
：
：
：
：
：
：
：
No Recording Materials Stored
Recording Material Stored
Step Back One Frame
Pause Playback
Fast Rewind
：
：
：
：
：
Rewind
Forward
Step Forward One Frame
Quad split screen display
CH2 Full Screen Display
CH4 Full Screen Display
Fast Forward
CH1 Full Screen Display
CH3 Full Screen Display
Click this button to capture images as BMP file, graphic shown by “Figure 2”
will be shown and PC Player Software auto creates a storage content
“Capture MYS”.
：
When recording videos onto the PC, first click the “Pause” button, then
“Now Recording” button on the graphic shown by “Figure 3”. Click again
to stop recording (shown on the graphic by “Figure 4”) and the PC Player
Software auto creates a storage content “Capture MYS”.
※
Note! Maximum storage capacity is 700MB, PC Player Software will create
one or more files to continue record (e.g.: Recorded video is 30 min. and
capacity is 1000MB > 700MB. Therefore, the system will store the recorded
material into 2 files: one file (700MB) and the other file (300MB)).
：
Click this button to playback recorded materials (stored on PC), graphic
show by “Figure 5” will be displayed. Please select the file to playback,
press “open” to playback. This button function is similar to “File Player”
function.
：
Click this button to shut the system.
58
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 2
Figure 3
59
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
Figure 4
Figure 5
60
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
B. Parameter Setup
To setup the parameter, click “Parameter Setup” button to show the graphic
display below (Figure 6):
Figure 6
61
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
11. TROUBLESHOOTING
Question
Answer
Why can’t the device read the hard Please reinstall the hard disk, make sure that it
disk? is properly connected, and reboot the device.
Why can’t the device read the CF Please reinsert the CF card, make sure that it
card?
is properly connected and reboot the device.
Suggested HDD Brand
Maxtor, Seagate, and Hitachi.
Apacer, Sandisk, Transcend, Hagiware, A-DATA
and Silicon.
Suggested CF card Brand
※CF Card Notice!
After inserting the CF card to the CF card slot on the front panel of the DVR, status LED will
lit (orange). Enter menu, select “CF card setting＂ function to detect the CF card, and to
display the total capacity and remaining capacity. Error may occur when using certain brands.
When error occurs, the message “HDD R/W IS NOT READY＂ or “HARD DISK
FAIL＂ will be displayed, informing that the total capacity and remaining capacity displayed
is incorrect.
When error is encountered (mentioned above), please note the following:
1. After inserting the CF card to the CF card slot on the front panel of the DVR. Please wait
for 30 seconds (when the status LED goes off (orange)) before proceeding CF card
detection or backup function.
2. During recording, do not insert the CF card, recording errors may occur.
3. Imprudently inserting the CF card during recording, results recording errors. Please
reboot the DVR and when the message “RECOVER HDD＂ appears, press
“ENTER＂ button to repair the previous recorded videos.
Please take note on the condition mentioned above.
62
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
12. SPECIFICATIONS
Format
NTSC/EIA or PAL/CCIR
Compression Modified M-JPEG
Video
Input
4CH, BNC
Output
1 x BNC, 1 x S-Video
Resolution
Frame Rate
Division
Resolution
Frame Rate
Quality
720 x 480 (NTSC), 720 x 576 (PAL)
Max. 120/100 fps (NTSC/PAL)
Single, Quad, Sequence
Display
Max. 640 x 244 (NTSC), 640 x 272 (PAL)
Max. 30/25 fps (NTSC/PAL)
High / Normal / Low
Recording
HDD
Mode
Manual / Schedule / Alarm / Motion Detection
1 x 3.5” IDE HDD (Max. 250GB)
1 x HDD RACK
Format
Removable
Input/ Output 4/ 1
Alarm
Trigger Mode Motion Detection, Sensor Input
Function
Recording, Relay Output, Sound Alert
5~30sec
Post Alarm
Search Method
Internet
By Date, Time, Event
10/100BaseT Ethernet (RJ45)
CF-Card, HDD, VCR,
Backup Device
TCP/IP network (live & playback)
DC 12V / 4A
Power Supply
Weight
5kg
Dimension (W*H*D)
Operating Environment
430mm x 320mm x 80mm
30 ~ 80% RH, 5 ﾟ C ~ 40 ﾟ C (41 ﾟ F ~ 104 ﾟ F)
63
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
64
DVR-IP4CF
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sharp MP3 Docking Station DK CL8PHBK User Manual
Sharp VCR VC H680X User Manual
Snapper Vacuum Cleaner 1694496 User Manual
Sony MP3 Player TCM 900DV User Manual
Sony Projector Accessories LMP P201 User Manual
Star Trac Fitness Electronics S RBX User Manual
Sterling Plumbing Indoor Furnishings 11400 User Manual
Stiga Lawn Mower 8211 0223 07 User Manual
Studer Innotec Battery Charger HPC 2800 12 HPC 4400 24 HPC 6000 48 HPC 8000 48 User Manual
Sub Zero Beverage Dispenser ICB424 User Manual