| 	
		 REQUIRED TOOLS   
					AND MATERIALS:   
					Sports Table   
					Owner’s Manual   
					Customer Service Center   
					• Two (2) capable   
					adults   
					• N53 W24700 South Corporate Circle • Sussex, WI 53089 • U.S.A.   
					Adult Assembly Required.   
					This manual, accompanied by sales receipt, should be saved and kept on hand as a   
					convenient reference, as it contains important information about your model.   
					• Hammer   
					• Safety Glasses   
					• (2 each) Wrenches and/or   
					Socket Wrenches and   
					Sockets (Deep-Well   
					Sockets are   
					Recommended).   
					• Extension is Recommended.   
					7/16" 1/2" 9/16" 3/4"   
					AND/OR   
					7/16" 1/2" 9/16" 3/4"   
					WARNING!   
					Write Model Number   
					From Box Here:   
					READ AND UNDERSTAND   
					OPTIONAL TOOLS   
					AND MATERIALS:   
					OPERATOR'S MANUAL   
					BEFORE USING THIS UNIT.   
					FAILURE TO FOLLOW   
					OPERATING INSTRUCTIONS   
					COULD RESULT IN INJURY   
					OR DAMAGE TO   
					• Large and Small   
					Adjustable Wrenches   
					PROPERTY.   
					Toll-Free Customer Service Number for U.S: 1-800-558-5234,   
					For Canada: 1-800-284-8339,   
					For Europe: 00 800 555 85234 (Sweden: 009 555 85234),   
					For Australia: 1-800-632 7921   
					Internet Address: http://www.huffysports.com   
					1 
					08/06   
					ID# M300011   
					© COPYRIGHT 2005 by SPALDING   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				HARDWARE IDENTIFIER   
					(NUTS AND WASHERS)   
					Get to know the basic parts   
					of your system...   
					2 
					12   
					12   
					12   
					12   
					11   
					12   
					12   
					1 
					7 
					#7 (2)   
					#8 (1)   
					3 
					6 
					9 
					#11 (1)   
					#10 (4)   
					4 
					5 
					5 
					5 
					7 
					8 
					5 
					10   
					10   
					3 
					08/06   
					ID# M300011   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Screw glider feet (5) into the bottom surface   
					of the table base (4) as shown.   
					Install net (3)   
					as shown.   
					1.   
					4.   
					1 
					10   
					5 
					4 
					3 
					Place the rod (6) through the table base (4)   
					2.   
					and   
					install flat washer (7) and jam nut (8)   
					as shown.   
					OUTSIDE VIEW   
					6 
					A.   
					B.   
					C.   
					D.   
					4 
					7 
					8 
					Position pole (9) over the rod (6) and into   
					the recessed location on the base (4) as   
					shown.   
					3.   
					6 
					1 
					9 
					4 
					3 
					4 
					ID# M300011   
					08/06   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				Attach the bumpers (12) to   
					the top of the rim (1) surface   
					as shown.   
					6.   
					5.   
					11   
					Install the rim (1)   
					assembly onto the   
					rod (6) above the   
					pole (9). Secure   
					with washer (7)   
					and acorn nut (11)   
					as shown. Tighten   
					completely.   
					7 
					1 
					12   
					1 
					9 
					4 
					4 
					Position table top (2) as shown.   
					7.   
					2 
					5 
					08/06   
					ID# M300011   
					Download from Www.Somanuals.com. All Manuals Search And Download.   
				 |