Southwestern Bell
Call Waiting Caller ID Telephone
NEW
STOP - DON'T TAKE ME BACK TO THE STORE.
LOOK - FOR THE TOLL-FREE "HELP" TELEPHONE NUMBER.
LISTEN - AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.
For immediate answers to your questions regarding operation,
missing parts or installation, call:
Southwestern Bell Freedom Phone
Retail Sales Help Line at
R
1-800-366-0937
Monday - Friday 8:30 a.m. - 9:00 p.m. EST
Saturday 8:30 a.m. - 12:00 p.m. EST
Toll Free Helpline
1-800-366-0937
SOUTHWESTERN BELL FREEDOM PHONE
7475 N. GLEN HARBOR BLVD., GLENDALE, AZ 85307
FM2560
Printed in China
IB-4108A
FM2560 OWNER'S MANUAL
3/23/2002
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety Instructions for Batteries
CAUTION
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS,
READ AND FOLLOW THESE INSTRUCTIONS.
1. Use only the size and type of batteries mentioned in the Owner's
Manual.
11. To reduce the risk of electric shock, do not disassemble this
product, but take it to a qualified technician when some
service or repair work is required. Opening or removing
covers may expose you to dangerous voltages or other risks.
Incorrect reassembly can cause electric shock when the
appliance is subsequently used.
12. Unplug this product from the wall outlet and refer servicing
to qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
2. Do not dispose of the batteries in a fire. The cells may explode.
Check with local codes for possible special disposal instructions.
3. Do not open or mutilate the batteries. Released electrolyte is
corrosive and may cause damage to the eyes or skin. It may be toxic if
swallowed.
4. Exercise care in handling batteries in order not to short the batteries
with conducting materials such as rings, bracelets, and keys. The
batteries or conductors may overheat and cause burns.
5. Do not attempt to recharge the batteries identified for use with this
product. The batteries may leak corrosive electrolyte or explode.
6. Do not attempt to rejuvenate the batteries identified for use with this
product by heating it. Sudden release of the battery electrolyte may
occur, causing burns or irritation to eyes or skin.
7. When replacing batteries, all batteries should be replaced at the
same time. Mixing fresh and discharged batteries could increase
internal cell pressure and rupture the discharged batteries.
8. When inserting batteries into this product, the proper polarity or
direction must be observed. Reverse insertion of the batteries can
cause charging, and that may result in leakage or explosion.
9. Remove the batteries from this product if the product will not be
used for a long period of time (several months or more) since during
this time the batteries could leak in the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions because improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to normal operation.
e. If the product has been dropped or the cabinet has been
damaged.
f. If the product exhibits a distinct change in performance.
13. Avoid using a telephone (other than a cordless type) during
an electrical storm. There may be a remote risk of electric
shock from lightning.
14. Do not use the telephone to report a gas leak in the vicinity
of the leak.
15. Use only the power cord and batteries indicated in this manual.
Do not dispose of batteries in a fire. They may explode. Check
with local codes for possible special disposal instructions.
10. Discard "dead" batteries as soon as possible since "dead" batteries
are more likely to leak in a product.
11. Do not store this product, or the batteries identified for use with
this product, in high-temperature areas. Batteries that are stored in a
freezer or refrigerator for the purpose of extending shelf life should be
protected from condensation during storage and defrosting. Batteries
should be stabilized at room temperature prior to use after cold
storage.
SAVE THESE INSTRUCTIONS
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Telephone Controls
Location of Caller ID Controls
HOOK SWITCH
RECEIVER
VOLUME
CONTROL
NEW CALL
LED
BASE
RINGER
OFF/LO/HI
SWITCH
(ON
BOTTOM
OF BASE)
LCD DISPLAY
CONTRAST
CONTROL
BUTTON ( )
NEW
KEYPAD
FLASH
BUTTON
REDIAL
BUTTON
FLASH
MEMORY
STORE
RESET
MEMORY
BUTTON
MUTE
REDIAL
QUICK REVIEW
UP & DOWN
BUTTONS
STORE
BUTTON
Southwestern Bell
ERASE
BUTTON
MUTE
BUTTON
BATTERY
COMPARTMENT
REDIAL
BUTTON
COIL CORD
RESET
BUTTON
6
7
Download from Www.Somanuals.com. All Manuals Search And Download.
General Information
UNPACKING
Installation
CAUTION:
1. Never install telephone wiring during a lightning storm.
2. Never install telephone jacks in wet locations unless the jack
is specifically designed for wet locations.
3. Never touch uninsulated telephone wires or terminals unless
the telephone line has been disconnected at the network
interface.
4. Use caution when installing or modifying telephone lines.
Note: Refer to the "FCC Requirements" section on page 26 before
connection to telephone line.
This package contains:
• FM2560 Telephone with Call Waiting Caller ID
• Owner's Manual
• One (1) Fully Modular Coil Cord
• One (1) Fully Modular Telephone Line Cord (Long Straight Cord)
• One (1) Fully Modular Telephone Line Cord (Short Straight Cord)
• One (1) Quick Installation Guide
• Warranty Card (Part of Owner's Manual)
If anything is missing or damaged, contact the place of purchase.
Keep the packaging to transport the telephone.
To Install Batteries
a. Open the battery door with a ball-point pen.
Helpful Tips From Customer Service
1. You must subscribe to Caller ID and Call Waiting service from your
local telephone company for your FM2560 to operate.
2. Remove the clear Caller ID label covering the FM2560's display.
3. Plug one end of the telephone line cord into the TELEPHONE
LINE jack on the FM2560 and the other end into the modular outlet in
your telephone wall jack.
Remarks:
If no battery is installed, the caller ID
function of the phone will not work.
4. Make sure you can read the display clearly. Adjust the display
contrast by pressing and holding the REDIAL and REVIEW s
buttons (in the location on the button labeled •) at the same time for 2
seconds. Press the REVIEW button to select the contrast level. Press
ERASE button to confirm the contrast.
b. Insert three AA alkaline batteries, making sure to observe the
correct battery polarity.
c. Replace the battery door.
Note: After installing the batteries, the system will display
"SET LANGUAGE s t". Your FM2560 enters setting mode. (See
setting up your FM2560 section for details).
8
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Replace the batteries when the
Battery Low Indicator
appears on the LCD display.
Installation
AM
b. Install the long telephone line cord into
the jack in the BASE. Thread it through
the groove, and plug it into the modular
wall jack as shown.
USING THE PHONE ON A DESK
c. Hang the base on the screws and pull it
down to lock it on.
a. Plug the long telephone line cord into the jack in the bottom of
the BASE. Thread it through the groove toward the back of the
unit, and then plug it into the modular wall jack.
b. Connect the COIL CORD to the jack in the HANDSET and the
BASE.
d. Plug the COIL CORD into the
HANDSET and BASE jacks.
Setting Up Your FM2560
NOTE: Do not lift the handset until you are finished setting the
Caller ID information.
HANGING THE PHONE ON THE WALL
When the FM2560 is wall-mounted, the HANDSET GUIDE
holds the HANDSET in place in the CRADLE.
To Set Language
1. If "SET LANGUAGE" is not
already displayed on the screen,
press and hold the REDIAL
Button (on the back of the
handset) for 2 seconds. The
LCD display will then show
"SET LANGUAGE s t".
2. Press the REVIEW s or t
Button to select English,
ON A WALL PHONE PLATE:
a. Plug the short telephone line cord into
the jack in the Base bottom and into the
jack on the plate.
b. Hang the BASE on the two pins and
push the BASE down to lock it on.
c. Plug the COIL CORD into the
HANDSET and BASE jacks.
French or Spanish.
3. Press the ERASE Button
to confirm the language selected.
The unit will then proceed to
the contrast setting mode.
ON THE WALL WITHOUT A PLATE:
a. Install 2 screws with anchors into the
wall, one above the other, 3-1/4" apart,
extending 3/16" out from the wall, to
hold the base securely.
To Set LCD Display Contrast
1. Press the REVIEW s button to make the contrast darker or the
REVIEW t button to make the contrast lighter.
10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Your FM2560
2. Press ERASE Button to
confirm selection. The unit will
then proceed to the area code
setting mode.
Telephone Operation
flash
4. When the unit is in the standby mode (i.e. not displaying Caller ID
information), the current time will display in the middle of the screen.
In the situations when the Caller ID information is displayed, the
current time will be shown in a smaller size on the top line.
To Set Area Code
Note: In order for the Caller
ID Redial feature to work properly, you must set your area code.
1. Press the REVIEW s or tButton until you have entered the
Dialing a Call
1. Lift the HANDSET.
2. When you hear a dial tone,
dial the number. LCD Display
Shows:
3. At the end of the call, return
the HANDSET to the
CRADLE.
AM
NEW
CALL
flash
correct first digit of your
local area code. Press the Erase
Button to move to the next digit.
2. Repeat step 1 for the progra-
mming of the second and third
digits of your local area code.
3. Press the ERASE Button
again to end the setting. The
display will show the default
time and day. The unit is now
ready to receive calls.
Receiving a Call
1. When you hear your phone
ring, lift the HANDSET. After
the first ring, if you have Caller
ID service, the NEW CALL
icon and call information will
appear on the display, and the
NEW CALL LED will flash.
Day
Month
AM
NEW
CALL
AM
The correct date and time are
automatically set when your
FM2560 receives its first call.
The caller ID information will be stored in the order received.
2. At the end of your call, return the HANDSET to the CRADLE .
Note: 1. If you try to use the telephone before finishing the Caller ID
set up, or if you pause more than 40 seconds during any of the above
steps, the display will show "SET LANGUAGE" to remind you to
finish this sequence.
NOTE: 1. If you answer your telephone before the second ring, the
unit will not display any Caller ID information.
2. To set up your FM2560 again, press and hold the REDIAL Button
for 2 seconds to restart setup.
2. The information will be displayed on the LCD for 20 seconds. If
the received call information is the same as any of the new calls, the
unit displays "RPT" icon to indicate a REPEAT CALL.
3. The maximun number of digits that can be displayed on the LCD is
10 and the maximum call count is 64 (old calls + new calls). Your
FM2560 will automatically erase the oldest call record and replace it
with the newest call record when the memory is full.
3. If you only want to adjust the LCD display contrast in standby
mode or in review mode, press and hold the REDIAL and REVIEW
s Buttons (in the location on the button labeled •) at the same time.
LCD will show "CONTRAST s t", to indicate that your FM2560
has entered contrast setting mode.
13
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Features
FLASH
If call waiting is available from your telephone company and you have
this service, you will be alerted by a signal (determinded by your
telephone company) if there is another call.
Telephone Features
number into memory in order to access custom and telebanking
services, long distance, etc. Press the PAUSE (REDIAL) button at the
desired point in the number. Press PAUSE (REDIAL) again if an
additional 4 seconds are needed.
Note: The telephone will be muted momentarily while the LCD
display shows the Caller ID information.
1. When you hear the signal, to access the new call without
disconnecting the call you are on, press the FLASH Button.
2. To return to your original conversation, press the FLASH Button
again. This procedure can be repeated as frequently as you desire.
REDIAL BUTTON
The last number you dialed (up to 32 digits) is automatically stored in
redial memory. To redial that number:
A. Lift the HANDSET. You will hear a dial tone.
b. Press the REDIAL Button. The last number dialed is automatically
redialed, including any pauses. The LCD will display "REDIAL".
Note: No redial function is executed if the last number is more than 32
digits. "FULL" will be displayed.
The FLASH Button can also be used to access a new dial tone without
hanging up, and also to signal PBX or to activate various services if
you are connected to PBX. If the FLASH Button is pressed, the LCD
display will be cleared until the number is entered.
MUTE BUTTON
Prevent sound from your room from being heard by another party on
the phone.
Press and HOLD the MUTE Button for as long as you want this
feature activated.
RINGER OFF/LO/HI SWITCH
Your FM2560 features a ringer which can be adjusted to loud (HI) or
soft (LO). When you don't want to be disturbed, set the switch to
"OFF". You can still make outgoing calls.
RESET BUTTON
At the end of a call, you can make your next call without replacing the
HANDSET in the cradle. Press and hold RESET to disconnect the
telephone.
LIGHTED KEYPAD
For better visibility when dialing in a dimly lit room, a lighted dial pad
is provided.
HEARING AID COMPATIBILITY
The FM2560 is compatible with inductively coupled hearing aids.
RECEIVER VOLUME CONTROL
The RECEIVER VOLUME CONTROL is located on the side of your
handset. This control allows you to adjust your handset volume from
normal to high for a more comfortable listening level.
CALL TIMER
When you dial a call, after the first 8 seconds, the call timer will
appear on the display for you to track the conversation time. It will
disappear 8 seconds after you hang up.
PAUSE
You can insert a 4-second PAUSE into the dialing or storing of a
14
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Dialing
Memory Dialing
If you wish to enter a 4-second Pause in the number you are storing,
press the REDIAL Button at the desired point in the number.
Your FM2560 is equipped with 10 memories for programming your
most frequently dialed telephone numbers. You can store up to 16
digits in each of the numeric keys 0 through 9 by following the steps
outlined. Numbers must be stored with the handset lifted.
To Dial Frequently Called Numbers:
1. Pick up Handset.
2. Press MEMORY Button. The LCD will show
"MEM".
MEMORY
To Program Frequently Called Numbers:
1. Lift the handset. You will hear a dial tone.
NOTE: YOU MUST COMPLETE STEPS 2-5 WITHIN 10
SECONDS, OR ELSE YOU WILL HEAR AN ERROR
MESSAGE FROM THE TELEPHONE COMPANY AND WILL
BE EXITED FROM THE MEMORY MODE.
3. Press the desired memory location Button (0-9).
4. Your call will automatically be dialed.
AM
NEW
CALL
2. Press the STORE Button.
The LCD will show "STORE".
To Erase A Stored Number
To erase a stored number, simply store a new number in the same
location. The new number will replace the old one.
3. Dial the phone number you
wish to store (16 digits
maximum). The LCD will
show the number you dialed.
Caller ID Features
New Call LED Indications
AM
NEW
CALL
SITUATION
No new call
NEW CALL LED INDICATOR
Off
There is a new call.
Flash
4. Press the STORE Button again.
When receiving a VIP call.
When the incoming VIP
call is a call waiting caller the call disappears.
ID call.
Flash 4 times each time the phone rings.
Flash 4 times every 6 seconds until
5. Press one of the 10 memory
AM
location buttons 0-9. Your
number is now stored in the
corresponding location. The
LCD will show the memory
location.
NEW
CALL
6. To continue programming numbers, return the HANDSET to the
CRADLE. Lift the handset, and repeat steps 2 through 5.
16
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Features
Receiving Call Waiting Caller ID
When you are on an existing phone call, your FM2560 will display
incoming call waiting Caller ID information.
1. You will hear a beep and the telephone will be muted momentarily
while the LCD display
Caller ID Features
NOTE: In the Caller ID Review mode, if your want to review the
Caller ID quickly (about 5 records/second), press and HOLD the
REVIEW s or t Button. The unit will then scroll through the
Caller ID records continuously.
Caller ID Redial
AM
NEW
CALL
shows the Caller ID
information of the
second caller.
The FM2560 allows you to redial a Caller ID record that you are
currently reviewing by simply pressing the Caller ID REDIAL Button.
To redial a call record, follow these steps.
2. The NEW CALL
LED indicator will flash.
NOTE: The handset must be in the base to review Caller ID
information.
1. Press the REVIEW s or t Button to select the Caller ID number
that you want to dial.
2. Press and release the Caller ID REDIAL Button. The display will read
" PICKUP PHONE".
3. When you press the FLASH Button to access the call waiting call,
the LCD will display the call waiting Caller ID information.
IMPORTANT:
You must subscribe to call waiting Caller ID service from your local
telephone company in order to receive call information.
3. When you lift the handset, "PICKUP PHONE" will clear and the
number will be automatically dialed.
With current Telecom redialing situations, there are 4 redial options: (1)
7 digits without a 1 prefix; (2) 7 digits with a 1 prefix; (3) 10 digits
without a 1 prefix; and (4) 10 digits with a 1 prefix.
1. 7 digits without a 1 : Assuming that you have programmed your
correct area code, redial your local call by pressing the REDIAL Button
ONCE.
2. 7 digits with a 1 : Assuming that you have programmed your correct
area code, scroll to the local 7 digit call you wish to redial. Simply press
the REDIAL Button TWICE.
3. 10 digits without a 1 : Due to the software setup of the FM2560 you
are instructed to enter your 3 digit local area code. In some areas of the
country, you must include your area code when making a local call. To
solve this issue, you should reprogram your FM2560 to another 3 digit
"fictitious" area code. We recommend using an area code not currently
being use in the U.S., (i.e... 100 etc.) Once your area code is
programmed as above, your FM2560 will show all "10 digits" for every
incoming call. To redial a local 10 digit call, press the REDIAL Button
twice in succession. The "1" prefix is then omitted and the local 10 digit
Reviewing New Call Records
NOTE: The handset must be in the base to review Caller ID
information.
1. When the Time/Day screen is displayed, press the REVIEW s or
t button, and the display will show the last new call information.
2. Continue pressing the REVIEW s or t button to review all new
call information in the order the calls were received.
3. After the final call has been reviewed, the display will show "END
OF NEW CALL", and the NEW CALL LED will stop flashing.
Reviewing Call Records Stored in Memory
NOTE: The handset must be in the base to review Caller ID
information.
1. When the Time/Date screen is displayed, press the REVIEW s or
t button, and the display will show the calls stored in memory.
2. Continue pressing the REVIEW s or t button to display all call
records in the order they were received, from the oldest to the newest,
or from the newest to the oldest.
3. Continue to review all calls until "END" is displayed.
call is redialed out.
18
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Caller ID Features
Caller ID Features
NOTE:
1. If there are messages that have not been reviewed, the "Erase All
Calls" function cannot be performed.
2. VIP (priority) calls will not be erased when you erase all calls. See
VIP CALLS section for details.
If you have priority calls in memory, the display will show "CALL
4. 10 digits with a 1 prefix: Simply review to the desired Long
Distance 10 digit call you wish to dial out. Press down the REDIAL
Button once and release. If your area requires that you add 1 and your
area code even if the call is within the same area code, then you must
reprogram your FM2560 to another 3 digit "fictitious" area code. The
"1" prefix will be added before the 10 digit number and your long
distance call will be dialed out.
XX" when all other calls have been erased.
VIP (Priority) Calls
The FM2560 allows you to
create VIP (priority) call
records. When a VIP (priority)
call is received, the new call
LED will flash 4 times each
time the phone rings, to alert
you this is a VIP (priority) call.
Caller ID Erase
NOTE: The handset must be in the base to review Caller ID
information.
AM
NEW
CALL
V I P
To Erase a Single Call
1. Press the REVIEW s or t Button to review the Caller ID records
you received.
2. Press ERASE Button
to erase the call
displayed; the LCD will
show "ERASE?".
3. Press ERASE Button
AM
NEW
CALL
NOTE: When the incoming VIP call is a call waiting Caller ID
call, NEW CALL LED will flash 4 times every 6 seconds until the call
information disappears.
To Create a VIP Call:
again; the call information will
be erased and the LCD will display the next call message.
NOTE: The handset must be in the base to review Caller ID
information.
1. Press the REVIEW s or t
NOTE: The handset must be in the base to review Caller ID
information.
AM
NEW
Button to view the caller ID
CALL
V I P
information you received.
2. Press and hold REDIAL
Button for 2 seconds until the
VIP icon is displayed.
Erase All Calls
1. Review all Caller ID records received before erasing all calls.
2. While the display is in the
standby mode, press and hold
AM
CALL
To Remove a VIP Call:
1. Press the REVIEW s or t
Button to display the call you
have marked "VIP".
2. Press and hold REDIAL
Button for 2 seconds. The VIP
icon will disappear.
the ERASE Button for 2
seconds. The LCD will show:
"ERASE ALL?".
3. Press the ERASE Button
again, ALL VIEWED
messages will be erased.
AM
NEW
CALL
20
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LCD Description
Answers To Commonly Asked Questions.
Section One - General
LCD Display
Description
Q. My unit won't work. What do I do?
A. You may need to install your unit again. Replace the three AA
Alkaline Batteries. If that doesn't work, call the Toll Free Help Line
at 1-800-366-0937 Monday - Friday 8:30 am - 9:00 pm or
Saturday 8:30 am - 12:30 pm (EST). You can also visit our website at
The Caller's number is
AM
NEW
CALL
8522605281. The Caller's
name is JANE. (When you
are on an existing phone call,
the call you received is a call
waiting caller ID. )
Q. Can my unit be left on for a long period of time?
A. Your unit is designed to be on 24 hours a day.
The Caller ID information is
missing the Caller's name and
number because it is
AM
NEW
CALL
Q. Will my unit operate in a very cold or hot environment?
A. Your unit is designed to perform most efficiently at room
temperature. However, it can be used in environments ranging
from 50 F to 120 F .
Out-of -Area.
AM
NEW
CALL
The Caller ID information is
missing the caller's name and
number because it is a Private
Call.
Section Two - Caller ID
Q. Why are some of the digits on the display missing?
A. Information in the Transmission is unable to be decoded by your
unit and could not be displayed. If the error affects only a single digit,
the display will sometimes show a "_" in the area of the digit effected.
Your telephone is able to recover all available information, making it
possible for you to determine who the call is from.
AM
The Caller ID is a VIP
(priority) call.
NEW
CALL
V I P
Q. How many calls can be stored in Caller ID memory?
A. The telephone number, name (if available), and time/day of up to
64 calls will be stored in memory.
The Caller ID information
received is invalid; the call
counter remains unchanged.
RPT
AM
NEW
CALL
The same call has been
received more than one time.
The time will be updated
with each call.
22
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Trouble Shooting Guide
Trouble Shooting Guide (Cont.)
PROBLEM
No dial tone
POSSIBLE CAUSE
Improper installation.
CORRECTIVE ACTION
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Recheck all modular plug
connections.
You cannot
redial a call
record.
Your local area
code is not
programmed.
Reprogram the local area code.
Problem with the wiring.
Try another phone jack. If your
phone works on another jack, it is
likely you have a problem with
your wiring. Contact your local
phone company.
The number
displayed is
incorrect.
Verify the number displayed
during redial. Data received were
possibly corrupted during the
transmission through the
telephone lines. Dial the
telephone number manually on
your telephone.
The phone
does not ring.
Ringer Off/Low/High switch
is not set correctly.
Set the ringer Off/Low/High
switch to the Low or High
position.
"Error" appears
on the display.
Bad data may have
been received.
Pick up the phone after the second
ring.
Too many telephones are
installed on the same line.
Contact your local telephone
company to determine the
maximum number of extensions
for your calling area.
You can't
receive call
waiting
This service is not
available.
You must subscribe to this service
from your local phone company.
The phone must be off-hook to hear
the call waiting Caller ID alert
signal.
Memory
dialing does
not work.
The memory storage
procedure was not followed
correctly.
Carefully review the store
sequence and re-enter your
programmed number.
messages.
Your telephone The telephone line is not
Connect the telephone line into the
back of the unit. Check with your
local telephone company to be
sure Caller ID service is being
provided on your telephone line.
rings but the
FM2560
connected properly to the unit.
doesn't show
any Caller ID
information.
The display
screen is blank. installed or replaced.
The battery needs to be
Replace the three AA alkaline
batteries.
24
25
Download from Www.Somanuals.com. All Manuals Search And Download.
This equipment may not be used on coin service provided by the
telephone company. Connection to party lines is subject to state tariffs.
This equipment is hearing aid compatible.
Warning: Changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user's authority
to operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Call B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation.
The compliant jack USOC RJ11C is provided and that is complied
with TIA/EIA-IS-968 or FCC part 68.
NOTICE: If your home has specially wired alarm equipment
connected to the telephone line, ensure the installation of this
[equipment ID] does not disable your alarm equipment. If you have
questions about what will disable alarm equipment, consult your
telephone company or a qualified installer.
FCC WANTS YOU TO KNOW
This equipment complies with Part 68 of the FCC rules and the
requirements adopted by the ACTA. On the bottom of this equipment is
a label that contains, among other information, a product identifier in the
format US:3F8MT09BFM2560S. If requested, this number must be
provided to the telephone company. On the bottom of the base of this
equipment is a label that contains, among other information, the
Registration Number and Ringer Equivalence Number (REN) for this
equipment. You must, upon request, provide this information to your
telephone company. The REN is used to determine the number of
devices that may be connected to a telephone line. Excessive RENs on a
telephone line may result in the devices not ringing in response to an
incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be
connected to a line, as determined by the total RENs, contact the local
telephone company. [For products approved after July 23, 2001, the REN
for this product is part of the product identifier that has the format
US:AAAEQ##TXXXX. The digits represented by ## are the REN
without a decimal point (e.g., 03 is a REN of 0.3). For earlier products,
the REN is separately shown on the label. you should contact your local
telephone company to determine the maximum REN for your calling
area.
An applicable certification jacks Universal Service Order Codes
(USOC) for the equipment is provided (i.e., RJ11C) in the
packaging with each piece of approved terminal equipment.
A plug and jack used to connect this equipment to the premises
wiring and telephone network must comply with the applicable
FCC Part 68 rules and requirements adopted by the ACTA. A
compliant telephone cord and modular plug is provided with this
product. It is designed to be connected to a compatible modular
jack that is also compliant. See installation instructions for
details.
If your telephone equipment causes harm to the telephone network, the
telephone company may discontinue your service temporarily. If
possible, they will notify you as soon as possible. If possible, they will
notify you in advance, but if advance notice isn't practical, you will be
notified as soon as possible. You will be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes in its facilities, equipment,
operations, or procedures that could affect the proper functioning of your
equipment. If they do, you will be notified in a advance to give you an
opportunity to maintain uninterrupted telephone service. If you
experience trouble with this telephone equipment the telephone company
may ask that you disconnect this equipment from the network until the
problem has been corrected or until you are sure that the equipment is
not malfunctioning.
26
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SERVICE
LIMITED WARRANTY
According to FCC regulations, this equipment, which has been
certified and registered by the FCC, may only be repaired by
authorized persons. If repairs or adjustments are made by an
unauthorized person, the FCC certification may be voided. Should
you encounter any problems, please call the Southwestern Bell
Freedom Phone toll-free Customer Help Line for assistance:
1-800-366-0937, Monday-Friday 8:30 am - 9:00 pm, and Saturday
8:30 am - 12:30 pm (EST). You can also visit our website at
This Southwestern Bell Freedom Phone is warranted to the original
purchaser to be free from defects in materials and workmanship under
normal installation, use, and service for a period of one (1) year from
the date of purchase as shown on the purchaser's receipt.
The obligation of Southwestern Bell Freedom Phone Retail Sales
under this warranty shall be limited to repair or replacement (at our
option) during the warranty period of any part which proves defective
in material or workmanship under normal installation, use, and
service, provided the product is returned to Southwestern Bell
Freedom Phone Retail Sales TRANSPORTATION CHARGES
PREPAID (California residents call 1-800-366-0937 for shipping
instructions). Products returned to us or to an Authorized Service
Center must be accompanied by a copy of the purchase receipt. In the
absence of such purchase receipt, the warranty period shall be one (1)
year from the date of manufacture. To obtain service under this
warranty, return the defective product to the service center nearest you
together with your sales slip and $9.50 for postage and handling
(California residents need only provide proof of purchase). You may
also have other warranty rights which vary from state to state.
FOR IN - WARRANTY SERVICE:
Package your complete unit (including all line cords, and other
accessories ) and ship the unit postage prepaid* and insured
(for your protection ) to:
SOUTHWESTERN BELL FREEDOM PHONE
DEPT.:Warranty Repair
7475 N. Glen Harbor Blvd., Glendale, AZ 85307
Be sure to include your return address, proof of purchase, a daytime
phone number, $9.50 for postage and handling*, and a brief
explanation of your difficulties.
*NOTE: California residents need only provide proof of purchase
and should call 1-800-366-0937 for shipping instructions.
FOR OUT-OF WARRANTY SERVICE:
You may call our toll-free Help Line for the price of a replacement
before returning your unit. Please follow all instructions for In-
Warranty service (above) to return your unit, and mark the package:
DEPT.: Out-of-Warranty.
If you have called and know the cost of your replacement, please
include this information with your unit for prompt service.
This warranty shall be invalid if the product is damaged as a result
of defacement, misuse, abuse, neglect, accident, destruction, or
alteration of the serial number, improper electrical voltages or
currents, repair, alteration or maintenance by any person or party other
than our own service facility or an authorized Service Center, or any
use violative of instructions furnished by us.
This warranty is also rendered invalid if this product is removed from
the country in which it was purchased, if it is used in a country in
which it is not registered for use, and/or if it is used in a country for
which it was not designed. Due to variations in telephone systems and
communications laws, this product may be illegal for use in some
countries. Southwestern Bell Freedom Phone Retail Sales assumes
no responsibility for damages or penalties incurred resulting from the
use of this product in a manner or location other than that which it is
intended.
QUESTIONS?
STOP...DON'T TAKE ME BACK TO THE STORE.
LOOK...FOR THE TOLL-FREE "HELP" TELEPHONE
NUMBER.
For immediate answers to your questions regarding operation,
missing parts or installation, call the
SOUTHWESTERN BELL FREEDOM PHONE HELP LINE AT
1-800-366-0937
28
29
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
This one-year limited warranty is in lieu of all other expressed
warranties, obligations, or liabilities. ANY IMPLIED WARRANTIES,
OBLIGATIONS, OR LIABILITIES, INCLUDING
BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, SHALL BE LIMITED IN DURATION TO THE
ONE-YEAR DURATION OF THIS WRITTEN LIMITED
WARRANTY. SOME STATES DO NOT ALLOW LIMITATIONS
ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATIONS MAY NOT APPLY TO YOU.
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL,
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESSED OR
IMPLIED, WHATSOEVER.
Some states do not allow the exclusion or limitation of special,
incidental, or consequential damages, so the above limitation or
exclusion may not apply to you. This warranty gives you specific
legal rights, and you may also have rights which vary from state to
state.
Covered under one or more of the following US patents: 5,263,084
Download from Www.Somanuals.com. All Manuals Search And Download.
|