Sony Universal Remote RCP D50 D51 User Manual

3-776-792-12(1)  
Remote Control  
Panel  
Operating Instructions  
Before operating the unit, please read this manual  
thoroughly and retain it for future reference.  
RCP-D50/D51  
2004 by Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Overview ............................................................................4  
Features ............................................................................... 4  
Locations and Functions of Parts ...................................5  
Operation Panel ................................................................... 5  
Connector Panel ................................................................ 13  
Mounting on a Console ..................................................14  
Menu Configuration and Basic Menu Operations........ 15  
Basic Operating Procedure ................................................ 15  
Basic Configuration of Menu Display .............................. 16  
Menu Items with the DXC-D50-Series Cameras .............. 20  
Menu Items with the DXC-D30/D35-Series Cameras ...... 27  
Menu Items with the DXC-637-Series Cameras ............... 34  
Menu Items with the CCU-TX50 ...................................... 38  
Initial Settings..................................................................45  
Setting the Operating Conditions of the RCP-D50/D51 ... 45  
Setting the Built-in Clock.................................................. 45  
Adjusting the Buzzer Sound.............................................. 46  
Adjusting the Brightness of the LEDs............................... 47  
Changing the Functions of the Rotary Encoders............... 47  
Adjusting the Brightness/Contrast of the LCD ................. 48  
Assigning a Function to the ASSIGN Button.................... 48  
Specifying the Security Codes .......................................... 49  
File Operations ................................................................51  
Operating Scene Files........................................................ 53  
Transferring Scene Files between the Camera and  
a Memory Stick (with the DXC-D50 Series) ............... 54  
Operating Setup Files (for DXC-D30/D35 Series only) ... 55  
Skin Detail Correction/Skin Matrix Adjustment  
(for DXC-D30/D35/D50 Series Only) .....................56  
Multi-Camera Control......................................................57  
Connections and Preparatons ............................................ 57  
Adjusting the Iris/Master Black of Multiple Cameras  
at One Time .................................................................. 57  
Data Transfer Among Multiple Cameras .......................... 57  
Operating Multiple Cameras from One RCP Unit —  
Command Link............................................................. 58  
Memory Sticks.................................................................59  
Using a Memory Stick....................................................... 59  
Notes on Memory Stick..................................................... 59  
Specifications..................................................................61  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
The RCP-D50/D51 Remote Control Panel enables  
remote operation of the DXC-D50-series, DXC-D30/  
D35-series,or DXC-637-series Color Video Cameras.  
Confirmation of camera conditions and  
operation status  
This unit’s LCD panel indicates camera conditions  
such as the optical filter position, value, and lens  
extender setting. The results of the camera’s self-  
diagnosis tests are also displayed on the LCD panel.  
The RCP-D50 and RCP-D51 are completely identical  
in their functions except with respect to the iris and  
master black adjustments.  
For the iris and master black adjustments, the RCP-  
D50 uses a joystick type control while the RCP-D51  
uses rotary knobs.  
Signal transmission via a digital line  
Between this remote control panel and the camera  
control unit, signals are digitally transmitted via a  
single connection cable (CCA-7), ensuring a reliable  
signal. Operating power is also supplied via the cable.  
Features  
Optimal control parts arrangement for  
basic camera operation  
Memory Stick slot  
Various data, including scene files, can be stored on a  
Memory Stick and reproduced at any time.  
This remote control panel is provided with essential  
control functions for basic operation of a camera.  
The buttons, knobs, and other controls have been  
arranged according to their functions and with  
consideration to their frequency of use. Indicators and  
buttons light or flash to indicate the status of the  
system operation. Also, guard frames are provided to  
protect against accidental use of those buttons vital to  
camera operation. These features ensure easy and  
error-free use of this remote control panel.  
Touch panel with 31/2-inch LCD for various  
operations  
The control panel has a touch panel that permits  
various items to be selected and adjusted on the LCD  
in menu format. (The menu items differ among the  
cameras to be connected.)  
Full control of shooting operations  
Video display function  
Besides controlling camera adjustments and settings,  
this unit can control tripod operations (pan and tilt) and  
lens settings (focus and zoom).  
The LCD can also display pictures from the connected  
camera, permitting you to use it as a convenient video  
monitor.  
Scene file  
Four units mountable on a 19-inch rack  
The unit provides memory to hold data on shooting  
conditions for 20 different scenes, to enable easy  
readjustment of the camera for any memorized scenes.  
(When a DXC-D50-series camera is connected, data  
are held in memory of the camera.)  
Up to four units of this control panel can be mounted  
in a line on a 19-inch EIA standard rack.  
Coordination of settings among several  
cameras  
In a system that includes several cameras that are  
connected via CCUs, connecting the CCUs allows this  
unit to set up all of the cameras into the same color  
condition.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locations and Functions of Parts  
Operation Panel  
1 MASTER and SLAVE buttons  
qa ASSIGN button  
qs Power and output select buttons  
MASTER SLAVE ASSIGN  
CAM PW  
AUTO SETUP  
BARS  
CLOSE  
2 PREVIEW button  
qd AUTO SETUP buttons  
3 STANDARD button  
SKIN DTL LEVEL START  
SET UP  
PREVIEW  
STANDARD  
WHITE BLACK  
qf White balance control buttons  
4 Camera/CCU function  
5600K  
AUTO  
KNEE  
SKIN  
DETAIL PRESET  
GATE  
A
B
DETAIL  
WHITE  
ON/OFF buttons  
PAINT1 PAINT2 PAINT3 SCENE OTHERS FUNCTION MONITOR  
MENU  
Menu operation block (page 9)  
MONITOR  
BRIGHT  
CONTRAST  
qg MASTER GAMMA knob  
qh DETAIL knob  
5 WHITE knobs  
MASTER  
GAMMA  
DETAIL  
WHITE  
6 BLACK/FLARE knobs and  
indicator  
qj MEMORY STICK slot and  
access lamp  
BLACK/FLARE  
a
EXT  
7 Camera number/tally indication  
window  
IRIS/M.BLACK  
ACTIVE  
OPEN  
IRIS/M.BLACK  
LINK  
MASTER  
BLACK  
SENS  
AUTO  
Iris/master black control block  
(page 10)  
RELATIVE  
RELATIVE  
CLOSE  
COARSE  
OPEN  
8 ALARM indicator  
ALARM  
CALL  
9 CALL button  
PANEL  
ACTIVE  
0 PANEL ACTIVE button  
IRIS  
CLOSE  
REMOTE CONTROL PANEL  
RCP-D50  
BLACK/FLARE  
7 Camera number/tally indication  
EXT  
window  
MASTER  
BLACK  
RELATIVE  
IRIS/  
M.BLACK  
LINK  
SENS  
OPEN  
CLOSE  
COARSE  
AUTO  
Iris/master black control block  
(page 12)  
IRIS/M.BLACK  
ACTIVE  
8 ALARM indicator  
ALARM  
CALL  
9 CALL button  
PANEL  
ACTIVE  
0 PANEL ACTIVE button  
IRIS  
REMOTE CONTROL PANEL  
RCP-D51  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locations and Functions of Parts  
1 MASTER and SLAVE buttons  
5 WHITE (white balance manual adjustment)  
knobs  
Used to manually adjust the white balance.  
The left knob is for the R signal and the right knob for  
the B signal.  
When adjusting the white balance of multiple cameras  
in Master/Slave mode, designate the master camera or  
the slave cameras. Press and light up the MASTER  
button to specify the connected camera for the master.  
Press and light up the SLAVE button to specify the  
connected camera for the slave. The slave cameras  
follow the master camera settings.  
6 BLACK/FLARE (black balance/flare balance  
manual adjustment) knobs and indicator  
Used to manually adjust the black balance (when the  
indicator is not lit) or the flare balance (when the  
indicator is lit).  
If you press a button when lit, it goes dark.  
2 PREVIEW button  
Press this button to control an external device  
connected to the EXT I/O connector on the connector  
panel.  
For the operational specifications, see “3 EXT I/O  
(external input/output) connector (9-pin)” in “Connector  
Panel” on page 13.  
From the left, the knobs are for R, G, and B signal  
adjustment.  
Selection between black balance and flare balance is  
made using the OTHERS menu.  
See “Changing the Functions of the Rotary Encoders” on  
page 47.  
3 STANDARD button  
7 Camera number/tally indication window  
The number of the camera being controlled from this  
panel is displayed in orange.  
When a red tally signal is sent to the camera, the  
number is displayed in black and the background of  
the number lights in red.  
When you press this button, the video camera is  
initialized to its standard state and the button lights for  
several seconds.  
If you press the button while it lights, the video camera  
retrieves the state before the button was lit.  
When a green tally signal is sent to the camera, the  
number is displayed in black and the background of  
the number lights in green.  
When both the red and green tally signals are  
simultaneously sent, the left half of the background  
lights in red and the right half lights in green.  
4 Camera/CCU function ON/OFF buttons  
Various functions of the video camera or the CCU can  
be turned on and off from this panel.  
8 ALARM indicator  
5600K  
AUTO  
KNEE  
SKIN  
DETAIL  
DETAIL  
GATE  
Lights when trouble occurs in the camera system and  
the self-diagnostic function activates at the video  
camera or the CCU.  
5600K (valid only with the DXC-D50 series):  
5600K electric color temperature conversion  
function  
9 CALL button  
When the camera is connected via a CCU, press to  
send a call signal to the video camera, on which the  
CALL button lights. The tally lamps on the camera  
and the red tally lamp on the CCU light when not lit,  
or go dark when lit.  
When the CALL button on the video camera is  
pressed, the CALL button on this panel lights and a  
buzzer sounds.  
AUTO KNEE: Auto knee function. When this button  
is lit (ON), the knee point is automatically adjusted  
according to the light content of the picture.  
SKIN DETAIL: Skin detail function  
DETAIL GATE: Skin detail gate function. When  
this button is lit (ON), the adjustment range of the  
skin tone detail is displayed in white on the  
monitor screen.  
For details on the Skin detail and Skin detail gate, see “Skin  
Detail Correction/Skin Matrix Adjustment (for DXC-D30/  
D35/D50-Series Only)” on page 56.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
0 PANEL ACTIVE button  
C CLOSE button  
Press and light up the button to permit this panel to  
control the camera system (Panel active status).  
The IRIS/M.BLACK ACTIVE button of the iris/  
master black control block also lights.  
If you press this button so that it goes dark, the panel  
will be locked, preventing accidental misoperation.  
If Panel Active Lock with a security code has been  
enabled, the PANEL ACTIVE and the IRIS/  
M.BLACK ACTIVE buttons are locked by pressing  
the PANEL ACTIVE button for more than 2 seconds  
in Panel active status.  
Press and light the button to close the iris. To release  
the close mode, press the button again so that it goes  
dark.  
The close mode is also released when you press the  
STANDARD or IRIS/M.BLACK LINK button, or  
operate a scene file.  
qd AUTO SETUP buttons  
A
B
C
D
For details on Panel Active Lock, see “Specifying the  
Security Codes” on page 49.  
AUTO SETUP  
SKIN DTL LEVEL START  
SET UP  
WHITE BLACK  
qa ASSIGN button  
Various functions can be assigned to this button using  
“SW Setting” of the RCP Config menu (No function is  
assigned at the factory).  
A Auto adjustment item select buttons  
Press and light up these buttons to select the items to  
be automatically adjusted.  
To assign a function, see “Assigning a Function to the  
ASSIGN Button” on page 48.  
SKIN DTL SETUP: Skin detail  
LEVEL: Gamma balance, knee point, master black  
level, etc.  
qs Power and output select buttons  
For details on the Skin detail setup, see “Skin Detail  
Correction/Skin Matrix Adjustment (for DXC-D30/D35/D50  
Series Only)” on page 56.  
B
A
C
B START button  
CAM PW  
BARS  
CLOSE  
Press to start automatic adjustment of the selected  
items.  
The button lights during adjustment and goes dark  
when adjustment is completed.  
A CAM PW (camera power) button  
When the unit is connected to the CCU-TX7, you can  
turn the power supply to the video camera ON by  
pressing and lighting up this button. (The button  
promptly flashes until the camera becomes ready for  
transmission.)  
C WHITE (white balance) button  
Press to automatically adjust the white balance.  
The button lights during adjustment and goes dark  
when adjustment is completed.  
When you press this button again, it starts flashing and  
the power supply is turned off.  
D BLACK (black balance) button  
Press to automatically adjust the black balance and  
black set.  
The button lights during adjustment and goes dark  
when adjustment is completed.  
B BARS (color-bar signal) button  
Press and light up this button to activate the color-bar  
signal generator of the video camera and send the  
respective the color-bar signal. When you press this  
button again, the button goes dark and the camera  
picture is displayed.  
Note  
If an error occurs during adjustment, the pressed  
button flashes.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locations and Functions of Parts  
qf White balance control buttons  
PRESET  
A
B
WHITE  
PRESET: Press and light this button to retrieve the  
preset white balance of the camera.  
A (memory A): Press and light this button to retrieve  
the white balance stored in memory A of the  
camera.  
B (memory B) (valid only with the DXC-D50  
series): Press and light this button to retrieve the  
white balance stored in memory B of the camera.  
Note  
When the ATW (automatic tracing white balance)  
function is active, the white balance control buttons are  
not operative.  
qg MASTER GAMMA knob  
Used to adjust the master gamma.  
qh DETAIL knob  
Used to adjust the detail level.  
qj MEMORY STICK slot and access lamp  
Insert a Memory Stick to store setting data, such as  
reference files and scene files of the video camera or  
CCU.  
The access lamp shows the status of the Memory  
Stick.  
Off: No Memory Stick is inserted.  
Lit in green: There is a Memory Stick in the slot. In  
this condition, you can safely eject the Memory  
Stick.  
Lit in red: Data are being read/written. If you eject  
the Memory Stick in this condition, the data are  
not guaranteed. All the data may be lost.  
Note  
If “Check Memory Stick” is displayed on the LCD in  
the menu operation block, check that the Memory  
Stick has sufficient unused storage space or it has been  
properly formatted.  
For details on Memory Sticks, see page 59.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 MONITOR button  
Press this button to display the picture from the  
connected camera on the LCD.  
Menu operation block  
Press the button again to return to the display of this  
unit.  
2
1
With a DXC-D50-series camera connected, eath time  
you press the MONITOR button, the camera picture,  
the camera picture with characters superimposed, and  
the menu display of this unit are displayed in sequence  
(When a CCU is used, the camera picture with  
characters is not displayed).  
PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS  
MENU  
MONITOR  
FUNCTION  
If no camera picture is displayed with the CCU-TX7  
connected, consult your Sony dealer.  
3
3 LCD/touch panel  
Normally displays the statuses (see page 16).  
When you press a MENU button, the corresponding  
menu is displayed to enable you to adjust the displayed  
items.  
When you press the MONITOR button, the picture  
from the camera is displayed.  
MONITOR  
BRIGHT  
CONTRAST  
4
4 Control knobs (rotary encoders)  
In Menu mode, adjust the selected items on the touch  
panel.  
1 MENU buttons  
Select the menu mode.  
When the picture from the camera is displayed on the  
LCD (MONITOR button lit), you can adjust the  
picture brightness with the second knob (BRIGHT)  
from the left and the picture contrast with the third  
knob (CONTRAST) from the left.  
If you press and light one of these buttons, the menu  
for the selected mode appears on the LCD.  
PAINT 1/2/3: Each selects the Paint menu to adjust  
various paint items, such as white, black, and flare.  
The configuration of the Paint menu depends on  
the connected camera. When Paint 4 and Paint 5  
are available, you can select them by pressing v or  
V on the Paint menu display (see page 16) or the  
PAINT 3 button.  
SCENE: Selects the File operation menu to register  
and retrieve scene files.  
OTHERS: Selects the OTHERS menu to set various  
settings, such as operational conditions of this  
control panel.  
FUNCTION: Selects the Function menu to control  
various camera and CCU functions.  
For the items of each menu, see “Menu Configuration and  
Basic Menu Operations” on page 15.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locations and Functions of Parts  
Iris/master black control block (RCP-D50)  
3 IRIS/M.BLACK LINK button  
4 IRIS/M.BLACK ACTIVE button  
5 AUTO button  
6 f-number display  
7 EXT indicator  
EXT  
IRIS/M.BLACK  
ACTIVE  
OPEN  
IRIS/M.BLACK  
LINK  
1 MASTER BLACK display  
8 SENS control knob  
MASTER  
BLACK  
SENS  
AUTO  
2 MASTER BLACK RELATIVE  
button  
9 COARSE control knob  
RELATIVE  
RELATIVE  
CLOSE  
OPEN  
COARSE  
0 Master black control ring  
qa IRIS control lever  
qs Preview switch  
IRIS  
CLOSE  
qd IRIS RELATIVE button  
1 MASTER BLACK display  
Displays the current master black setting in the range  
3 IRIS/M.BLACK LINK (iris/master black  
adjustment link) button  
from –99 to +99.  
Press and light up the button to perform linked  
adjustments of iris and master black for several  
cameras.  
For details, see “Adjusting the Iris/Master Black of Multiple  
Cameras at One Time” on page 57.  
2 MASTER BLACK RELATIVE button  
When the IRIS/M.BLACK ACTIVE button is lit, the  
master black adjustment mode can be selected with  
this button.  
4 IRIS/M.BLACK ACTIVE (iris/master black  
active) button  
Press and light up this button to enable the iris/master  
black control block of the panel.  
When the PANEL ACTIVE button is pressed, this  
button also lights.  
Press and light up the button for Relative mode, or  
press and turn it dark for Absolute mode.  
When the IRIS/M.BLACK ACTIVE button is not lit,  
Relative mode is automatically selected and this button  
is not operative.  
Note  
If you press this button so that it goes dark, the panel  
will be locked, preventing accidental misoperation.  
When VR STD MODE is set to Absolute with the VR  
Setting of the RCP Config menu, Relative mode is not  
selected even if you turn the IRIS/M.BLACK  
ACTIVE button off. When you turn the IRIS/  
M.BLACK ACTIVE button on, the master black value  
corresponding to the position of the master black  
control ring is restored.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 AUTO button  
qd IRIS RELATIVE (iris relative) button  
When the IRIS/M.BLACK ACTIVE button is lit, the  
iris adjustment mode can be selected with this button.  
Press and light up the button for Relative mode or  
press so that it goes dark for Absolute mode.  
When the IRIS/M.BLACK ACTIVE button is not lit,  
Relative mode is automatically selected and this button  
is not operative.  
Press and light the button to automatically adjust the  
iris according to the amount of input light.  
When this button is lit, the reference value for  
automatic iris adjustment can be set with the iris  
control.  
If you press the button when lit, it goes dark and  
manual iris adjustment is enabled.  
Note  
6 f-number display  
When VR STD MODE is set to Absolute with “VR  
Setting” of the RCP Config menu, Relative mode is  
not selected even if you turn the IRIS/M.BLACK  
ACTIVE button off. When you turn the IRIS/  
M.BLACK ACTIVE button on, the iris setting  
corresponding to the IRIS lever position is restored.  
Displays the f number of the current iris setting. When  
the iris is closed, “CL” is displayed.  
When the DXC-D50 series is connected, “OP” is  
displayed for the maximum f-number value.  
7 EXT (lens extender) indicator  
Lights when the lens extender is used.  
Iris adjustment functions  
Relative mode  
Absolute mode  
8 SENS (sensitivity) control knob  
Used for manual iris adjustment in Absolute mode.  
This control is not operative when Relative mode is  
selected.  
(RELATIVE button lit)  
(RELATIVE button not lit)  
IRIS lever  
Adjusts the iris with  
Adjusts the iris  
within the variable  
(RCP-D50)/ relative values from  
IRIS control OPEN to CLOSED.a) range set by the  
(RCP-D51)  
SENS and COARSE  
controls.  
See the table “Iris adjustment functions”to the right.  
COARSE  
control  
Adjusts the total  
range from OPEN  
to CLOSED in relative  
values.  
Sets the lower limit  
for CLOSED.  
9 COARSE control knob  
Used for manual iris adjustment.  
See the table “Iris adjustment functions”to the right.  
SENS  
control  
Does not function.  
Sets the upper limit  
for OPEN according  
to CLOSED value  
set by the COARSE  
control.  
0 Master black control ring  
Turn to manually adjust the master black level.  
qa IRIS control lever  
When the AUTO button is not lit, you can adjust the  
a) The adjustable range can be set with “VR Rel. Scale” of  
the RCP Config menu.  
iris manually by moving the lever.  
When the AUTO button is lit, the reference value for  
automatic iris adjustment can be set.  
See the table “Iris adjustment functions” to the right.  
qs Preview switch  
Press this switch to control an external device  
connected to the EXT I/O connector on the connector  
panel.  
For the operational specifications, see “3 EXT I/O  
(external input/output) connector (9-pin)” in “Connector  
Panel” on page 13.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locations and Functions of Parts  
Iris/master black control block (RCP-D51)  
4 IRIS RELATIVE button  
5 IRIS/M.BLACK LINK button  
1 MASTER BLACK display  
6 f-number display  
EXT  
7 EXT indicator  
2 MASTER BLACK control  
8 SENS control knob  
9 COARSE control knob  
MASTER  
BLACK  
IRIS/  
M.BLACK  
LINK  
SENS  
RELATIVE  
OPEN  
COARSE  
CLOSE  
3 IRIS/M.BLACK ACTIVE button  
AUTO  
IRIS/M.BLACK  
ACTIVE  
0 IRIS control  
qa Iris gauge  
IRIS  
qs AUTO button  
1 MASTER BLACK display  
Note  
Displays the current master black setting in the range  
from –99 to +99.  
When VR STD MODE is set to Absolute with “VR  
Setting” of the RCP Config menu, Relative mode is  
not selected even if you turn the IRIS/M.BLACK  
ACTIVE button off. When you turn the IRIS/  
M.BLACK ACTIVE button on, the iris setting  
corresponding to the position of the IRIS control is  
restored.  
2 MASTER BLACK control  
Manually adjust the master black level.  
The setting is displayed in the MASTER BLACK  
display.  
3 IRIS/M.BLACK ACTIVE (iris/master black  
active) button  
Press and light up this button to enable the iris/master  
black control block of the panel.  
When the PANEL ACTIVE button is pressed, this  
button also lights.  
If you press this button so that it goes dark, the panel  
will be locked, preventing accidental misoperation.  
5 IRIS/M.BLACK LINK (iris/master black  
adjustment link) button  
Press and light up the button to perform linked  
adjustments of iris and master black for several  
cameras.  
For details, see “Adjusting the Iris/Master Black of Multiple  
Cameras at One Time” on page 57.  
6 f-number display  
Displays the f number of the current iris setting. When  
the iris is closed, “CL” is displayed.  
When the DXC-D50 series is connected, “OP” is  
displayed for the maximum f-number value.  
4 IRIS RELATIVE (iris relative) button  
When the IRIS/M.BLACK ACTIVE button is lit, the  
iris adjustment mode can be selected with this button.  
Press and light up the button for Relative mode or  
press so that it goes dark for Absolute mode.  
When the IRIS/M.BLACK ACTIVE button is not lit,  
Relative mode is automatically selected and this button  
is not operative.  
7 EXT (lens extender) indicator  
Lights when the lens extender is used.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8 SENS (sensitivity) control knob  
Used for manual iris adjustment in Absolute mode.  
This control is not operative when Relative mode is  
selected.  
Connector Panel  
1 MONITOR connector  
See the table “Iris adjustment functions”on page 11.  
2 CCU/CAMERA connector  
3 EXT I/O connector  
9 COARSE control knob  
Used for manual iris adjustment.  
See the table “Iris adjustment functions” on page 11.  
CCU/  
CAMERA  
MONITOR  
EXT I/O  
0 IRIS control  
When the AUTO button is not lit, you can adjust the  
iris manually by turning the control.  
When the AUTO button is lit, the reference value for  
automatic iris adjustment can be set with this control.  
1 MONITOR connector (BNC type)  
Connect to a video monitor.  
See the table “Iris adjustment functions” on page 11.  
2 CCU/CAMERA (camera control unit/camera)  
connector (10-pin)  
Connect to the REMOTE connector of a camera  
control unit or a camera.  
qa Iris gauge  
Turn the gauge to set the line to the most frequently  
used iris position, and it can be used as the reference  
for manual iris adjustment.  
3 EXT I/O (external input/output) connector  
(9-pin)  
This connector permits you to control an external  
device using the PREVIEW button (page 6) or the  
preview switch (page 11).  
qs AUTO button  
Press and light the button to automatically adjust the  
iris according to the amount of input light.  
When this button is lit, the reference value for  
automatic iris adjustment can be set with the iris  
control.  
Operational specifications  
If you press the button when lit, it goes dark and  
manual iris adjustment is enabled.  
While the PREVIEW button or the preview switch  
(RCP-D50 only) is held pressed, pin 1 and pin 2 of the  
EXT I/O connector are short-circuited.  
Pin assignment of the EXT I/O connector  
1
5
9
6
Caution  
When installing this panel, provide a gap of 7 cm (3  
inches) or more behind the connector panel to prevent  
damage to cables.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Mounting on a Console  
The RCP-D50/D51 can be mounted on a console as  
shown below:  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
The RCP-D50/D51 provides menu operations for  
various functions such as adjustments of system  
equipment.  
When the selected menu is composed of  
multiple pages  
With the menu that is composed of multiple pages  
such as Paint menu, press v or V to flip the pages.  
See “Initial display (Paint menu)” on the next page.  
Basic Operating Procedure  
When a submenu is shown  
Press the desired submenu item to change the  
display.  
See “Submenu” on page 17.  
1
3 Set or adjust the item (parameters).  
FUNCTION MONITOR  
PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS  
MENU  
• Turn the control knobs (or press the button) to  
adjust (or set) the corresponding item  
(parameters) to the desired values.  
See “Adjustment display” on page 17.  
• When a message is displayed, follow the  
instruction and press [OK].  
2
3
When the adjustment is finished  
• To adjust another item of the same menu, press the  
names of that item.  
• To adjust items of another menu, press the  
corresponding MENU button.  
MONITOR  
BRIGHT  
CONTRAST  
• To release the menu operation mode, press the lit  
MENU button.  
• You may select Function menu without exiting the  
currently selected menu. When you exit Function  
menu by either of the following methods, the  
previous menu is restored.  
– Press the lit FUNCTION button so that it goes dark.  
– Press the lit MENU button for the previous menu.  
1 To display a menu, press and light one of the  
MENU buttons.  
The menu operation mode is initiated and the menu  
for the pressed button appears on the display.  
PAINT 1/2/3: Paint menu  
SCENE: Scene file operation menu  
OTHERS: OTHERS menu  
To monitor the camera picture  
Press the MONITOR button.  
The picture from the connected camera is displayed on  
the LCD.  
FUNCTION: Function menu  
With a DXC-D50-series camera connected, eath time  
you press the MONITOR button, the camera picture,  
the camera picture with characters superimposed, and  
the menu display of this unit are displayed in  
sequence. (When a CCU is used, the camera picture  
with characters is not displayed.)  
Note  
The menu items to be displayed depends on the  
connected camera.  
2 Select the item to be adjusted.  
Press the button that shows the name of the item on  
the menu to obtain the corresponding adjustment  
display or operation area.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Basic Configuration of Menu Display  
Status display  
When you do not select any menu or the signal from  
the camera, the LCD shows the following status  
display:  
On the status display, the set value  
of each item is only displayed. The  
setting is made with the Function  
menu or with the corresponding  
knob on the operation panel.  
The set values of the shutter and master gain  
are displayed. You may adjust these items  
using the Function menu.  
The ND filter number being selected  
on the camera is displayed.  
Status  
Shutter  
M. Gain  
Filter  
60  
12dB  
1
When you select a scene file,  
the filename is displayed.  
Scene File : 2 DXC-D50  
White  
You may adjust these items using the  
WHITE, MASTER GAMMA, BLACK/  
FLARE, and DETAIL knobs, and IRIS  
control (or IRIS lever).  
Gamma  
Detail  
0
0
Black  
0
0
Iris  
The “Black” columns can be changed to  
“Flare” using the OTHERS menu.  
0
0
0
2
Initial display (Paint menu)  
When you press and light the PAINT 1 (or PAINT 2,  
PAINT 3) button of the menu operation block, the  
initial display of the Paint menu is obtained.  
Current page number / total number of pages  
1 / 5  
Clear  
To clear the adjusted values  
Press either to flip the pages of the  
menu.  
Gamma  
/Knee  
White  
Black  
Flare  
The names of the items are  
displayed. Press the name  
of the item to be adjusted.  
The color of the pressed  
name area will change, and  
the lower half of the panel  
will become the adjustment  
display (see the next page).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustment display (Paint menu)  
When you select an item on the initial display of the  
Paint menu, the lower half of the panel becomes the  
adjustment display for the selected item.  
Example: when you select “White” from the PAINT 1 initial display with the DXC-D50 series  
connected  
The name of the item selected on  
the initial display is displayed.  
If you press this area after pressing  
[Clear], all the adjustment values for  
the selected item are initialized to  
standard.  
Clear  
White  
1 / 5  
Black  
Flare  
Gamma  
/Knee  
When you press this, the upper  
half of the panel becomes the  
monitor output setting display  
(see page 19).  
Monitor  
Select  
White  
Memory  
Preset  
Memory  
A
ATW  
When there are any ON/OFF  
functions related to the adjustment,  
the names of the functions are  
displayed on this line.  
B
R
B
The adjustment parameters  
for the selected item and their  
adjustment values are  
displayed.  
0
0
You may adjust these items  
using the corresponding  
control knobs.  
If you press a value area after  
pressing [Clear], that  
adjustment value is initialized  
to standard.  
Submenu  
If the selected item has many parameters, a submenu is  
displayed.  
Example: when you select “Skin Detail” from the PAINT 2 initial display (Advance mode)  
with the DXC-D50 series connected  
Clear  
2 / 5  
Detail  
Skin  
Detail  
Black  
Gamma  
WF/PIX  
Select  
Detail 1  
Submenu  
1
2
Level  
H/V Ratio Frequency  
0
0
0
Press to switch the parameters.  
WF/PIX  
Select  
Detail 2  
1
2
Crispening Level Dep  
0
0
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Function menu displays  
When you press and light the FUNCTION button of  
the menu operation block, the scene file operation  
menu display is obtained.  
When “Operation” is selected  
Example: with the DXC-D50 series connected  
The ND filter number being selected  
on the camera is displayed.  
Filter  
1
Opera-  
tion  
SW  
Lens  
/Pan  
White  
Black  
Flare  
Monitor  
Select  
Press one of these buttons  
calls the adjustment display of  
the corresponding paint item.  
The items to be displayed on  
this Function menu can be  
changed using the OTHERS  
menu. (You cannot jump to the  
items that are not available on  
the connected camera or  
disabled.)  
When you press this, the upper  
half of the panel becomes the  
monitor output setting display  
(see the next page).  
Gamma  
/Knee  
Detail  
CLS  
Skin  
Detail  
Matrix  
Shutter  
TLCS  
Master  
Gain  
60 50.31  
0dB  
You may adjust these items using the  
corresponding control knobs.  
When “SW” is selected  
Example: with the DXC-D35 series connected  
Filter  
1
Opera-  
tion  
SW  
Lens  
/Pan  
Current page number /  
total number of pages  
1 / 2  
Skin  
Detail  
Skin  
Gate  
Press either to flip the pages of  
the menu.  
ATW  
TLCS  
Auto  
Knee  
Skin  
Matrix  
Flare  
Off  
These buttons turn on and off the  
corresponding functions.  
Any button whose designation includes “Off”  
turns the respective function OFF when you  
light it. Other buttons turn the respective  
functions ON when you light them.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor output set display (Expansion menu)  
When you press [Monitor Select] on an adjustment  
display of the Paint menu, the upper half of the panel  
becomes the monitor output setting display.  
When the CCU-TX7 is connected, you  
can select the WF/PIX output signals.  
R/G/B: To independently select the R,  
G, or B signal.  
Monitor Select  
R
G
B
RGB  
SEQ  
ENC  
RGB: To select the R, G, and B signals  
in combination.  
Monitor  
Select  
SEQ: Only the WF output is enabled,  
and you can monitor the waveforms of  
the R, G, and B signals in sequence.  
Press again to return to  
the previous display.  
ENC (encode): The encoded signal is  
output.  
Scene File operation menu display  
When you press and light the SCENE button of the  
menu operation block, the Scene File operation menu  
display is obtained.  
Scene Files  
Scene file store button  
Store  
Scene file recall buttons:  
Buttons 1 to 20 can be displayed  
by pressing v or V, or turning the  
leftmost (Page) control knob.  
1
2
3
4
5
Scene 1 : STUDIO1  
Scene 2 : DXC-D30  
Scene 3 : TEST 002  
Scene 4 :  
Scene :  
DXC_D  
2*  
Filename box:  
File list  
Enter a filename using the  
second (Char) from the right and  
the rightmost (Cur) control knob.  
Scene 5 :  
Page  
Char  
Cur  
For details on the scene file operations, see page 53.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu Items with the DXC-D50-Series Cameras  
z
The “Control items” marked with are those assigned  
to the control knobs. The other items are operated on  
the menu display.  
The items displayed differ according to whether the  
unit is in Advanced Setting mode or in Normal Setting  
mode. The items shaded (  
) in the table below are  
displayed only in Advanced Setting mode.  
Switching between Normal Setting mode and  
Advanced Setting mode is performed in RCP Config  
(Security Status) on the OTHERS menu.  
Paint menu (with the DXC-D50 series)  
Paint menu consists of pages 1 to 5.  
Paint 4 and 5 can also be selected in sequence by  
pressing the PAINT 3 button.  
You can select page 1 through 3 directly by pressing  
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.  
Pressing vor V of the page selected with a MENU  
button flip pages 1 through 5 in sequence.  
Page  
Menu  
Submenu  
Control item  
White Preset  
Memory A  
Function  
Paint 1  
White  
To retrieve the white balance settings preset by the camera  
To retrieve the white-balance settings stored in Memory A. The  
retrieved settings can be adjusted in Auto or Manual mode (the  
adjusted values are stored in Memory A).  
Memory B  
ATW  
To retrieve the white-balance settings stored in Memory B. The  
retrieved settings can be adjusted in Auto or Manual mode (the  
adjusted values are stored in Memory B).  
To turn ON/OFF the Auto Tracing White function (which  
automatically adjusts the white balance when lighting conditions  
change)  
• R  
• B  
To adjust the gain of the R signal in the white when Memory A or  
Memory B is pressed  
To adjust the gain of the B signal in the white when Memory A or  
Memory B is pressed  
Black  
Flare  
• R  
To adjust the gain of the R signal in the black  
To adjust the gain of the B signal in the black  
To adjust the master black  
• B  
• Master  
Flare Off  
To turn the flare (black level when flare is generated) correction  
function ON/OFF  
• R  
To adjust the amount of flare correction for the R signal  
To adjust the amount of flare correction for the G signal  
To adjust the amount of flare correction for the B signal  
To turn the Auto Knee circuit ON/OFF  
• G  
• B  
Gamma/Knee  
Auto Knee  
• Gamma  
• Blk Gamma  
• Knee Point  
To adjust the gamma level  
To adjust the black gamma level  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Knee Slope  
To adjust the knee slope (amount of knee correction)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page  
Menu  
Submenu  
Control item  
• Level  
Function  
Paint 2  
Detail  
Detail 1  
To adjust the detail (contour correction) level  
• H/V Ratio  
To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in  
detail correction. As the value becomes larger, the V detail ratio  
increases.  
• Frequency  
• Crispening  
• Level Dep  
• CCS Level  
Detail Gate  
Skin DTL  
To adjust the boost frequency (thickness of contour lines) for the  
detail correction  
Detail 2  
To adjust the crispening level (appropriate level at which details of  
noise signals are removed)  
To adjust the level dependence (level at which the detail signal starts  
being suppressed)  
Cross Color  
Skin Detail  
To adjust the cross color suppress level to suppress the phenomenon  
of color jittering or coloring when a minutely striped pattern is shot  
To turn ON/OFF the skin gate area (target color range of skin detail  
correction or skin matrix adjustment)  
To turn the skin detail function (which suppresses the contour  
correction in the selected area) ON/OFF  
Auto Skin  
The unit will go to Standby mode when this button is pressed, and  
will automatically start obtaining the skin gate area data when Start  
is pressed.  
• Level  
To adjust the amount of skin detail correction. As the value becomes  
larger, the amount of detail in the skin gate area decreases.  
• Phase  
• Width  
• Sat  
To adjust the color phase of the designated area  
To adjust the color width of the designated area  
To adjust the color saturation of the designated area  
To adjust the level of the black R gamma  
To adjust the level of the black B gamma  
To adjust the master black gamma  
Black Gamma  
Knee/DL  
• R  
• B  
• Master  
Auto Knee  
• Point  
Paint 3  
To turn the auto knee ON/OFF  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Slope  
• R  
To adjust the knee slope (amount of knee correction)  
To adjust the level of the R gamma  
Gamma  
Matrix  
• B  
To adjust the level of the B gamma  
• Master  
• Hue  
• Sat  
To adjust the master gamma  
Matrix 1  
To adjust the hue of the linear matrix  
To adjust the color saturation of the linear matrix  
• Matrix  
To select the Matrix Adjustment mode  
STD: Standard  
FL: For shooting under fluorescent light  
High Sat: High saturation (increasing the saturation of primary  
colors)  
Matrix 2  
Matrix 3  
• R-G/• G-B/• B-R  
To adjust the color tone for the R–G, G–B, or B–R elements of the  
matrix  
• Matrix  
To select the Matrix Adjustment mode  
• R-B/• G-R/• B-G  
To adjust the color tone for the R–B, G–R, or B–G elements of the  
matrix  
• Matrix  
Skin Matrix  
• Hue  
To select the Matrix Adjustment mode  
Skin Matrix  
To select the skin matrix function ON/OFF  
To adjust the hue of the designated area  
To adjust the color saturation of the designated area  
• Sat  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Page  
Menu  
Submenu  
Control item  
Function  
Paint 4  
White Clip  
• Master  
To adjust the amount of white clip (the highest white level). As the  
value becomes larger, the output level decreases.  
TLCS  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
• AGC/C.Point  
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris  
control is switched to AGC (auto gain control)  
• AGC/Limit  
• AE/C.Point  
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/  
18 dB) adjustment  
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris  
control is switched to the AE (auto exposure)  
• AE/Limit  
STD  
To set the upper limit value for AE control (100/150/200/250)  
To select the standard auto iris mode  
Auto Iris  
Spot Light  
Back Light  
TLCS  
To select the auto iris mode for shooting spot-lit subjects  
To select the auto iris mode for shooting back-lit subjects  
To turn the TLCS (total level control) function ON/OFF  
To turn the shutter function ON/OFF  
CLS/EVS  
Shutter  
CLS  
To turn the CLS (clear scan) function (which reduces noise on the  
horizontal scan lines when the monitor screen connected to a PC is  
shot) ON/OFF  
EVS  
To turn the EVS mode (which reduces flicker by increasing the  
vertical resolutions) ON/OFF  
• Shutter  
• CLS  
To select the shutter speed  
To adjust the CLS frequency  
To adjust the low key saturation level  
Paint 5  
Low Key Sat  
Auto Knee  
• Level  
Adaptive  
To turn ON/OFF the function that makes the knee correction slope  
smooth to make the gradation natural  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function menu (with the DXC-D50 series)  
Menu  
Control item  
Jump menu 1  
Jump menu 2  
Jump menu 3  
Jump menu 4  
Function  
Operation  
To jump to the adjustment screen designated for Menu 1 in Menu Set a)(Default: White of Paint 1)  
To jump to the adjustment screen designated for Menu 2 in Menu Set a) (Default:Black of Paint 1)  
To jump to the adjustment screen designated for Menu 3 in Menu Set a) (Default: Flare of Paint 1)  
To jump to the adjustment screen designated for Menu 4 in Menu Set a) (Default: Gamma/Knee  
of Paint 1)  
Jump menu 5  
Jump menu 6  
To jump to the adjustment screen designated for Menu 5 in Menu Set a) (Default: Detail of Paint 2)  
To jump to the adjustment screen designated for Menu 6 in Menu Set a) (Default: Skin Detail of  
Paint 2)  
Jump menu 7  
To jump to the adjustment screen designated for Menu 7 in Menu Set a) (Default: Matrix of Paint  
3)  
Shutter  
To turn the shutter function ON/OFF  
• Shutter  
CLS  
To select the shutter speed  
To turn the CLS (clear scan) function ON/OFF  
To select the CLS frequency  
• CLS  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To select the master gain value among –3/0/3/6/9/12/18/24/30/36 dB  
To turn the color temperature 5600K ON/OFF  
To turn the skin detail function ON/OFF  
• Master Gain  
5600K  
SW  
Skin Detail  
Detail Gate  
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail  
correction or the skin matrix adjustment)  
ATW  
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white  
balance when lighting conditions change) ON/OFF  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To turn the Auto Knee function ON/OFF  
To turn the skin matrix function ON/OFF  
To turn the flare correction function ON/OFF (OFF while the button is lit)  
To turn the option control function 1 ON/OFF  
To turn the option control function 2 ON/OFF  
To adjust the focus  
Auto Knee  
Skin Matrix  
Flare Off  
Option 1  
Option 2  
• Focus c)  
• Zoom c)  
• Pan d)  
Lens/Pan b)  
To adjust the zoom  
To adjust panning of the tripod head  
• Tilt d)  
To adjust tilting of the tripod head  
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.  
b) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.  
c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.  
d) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
OTHERS menu (with the DXC-D50 series)  
Menu  
2ndary menu Submenu  
Control item  
Function  
Adjusting  
White Shading  
• R  
To adjust the V white shading (vertical variation of the white) of the  
R signal  
• G  
To adjust the V white shading of the G signal  
To adjust the V white shading of the B signal  
• B  
Camera  
Config  
Camera ID  
CAM ID IND  
To turn the camera ID display ON/OFF while the camera is in Color  
Bars mode  
Clock IND  
• Char  
Switching of the clock indication  
Cam: To always display the clock indication  
Bars: To display only when the camera color bars are displayed  
Off: No clock indication  
To select characters when entering a camera ID (alphanumerics,  
symbols, and space)  
• Cur  
To move the cursor when entering a camera ID (eight characters)  
To register the entered camera ID  
ID SET  
Center Marker  
Center Marker  
Safety Zone  
Screen Mode  
Req  
To turn the center marker ON/OFF  
To set the safety zone (90%/80%/OFF)  
To select the Screen mode (4:3/16:9)  
Screen Mode a)  
Diag  
To request camera’s self-diagnostic data (available only when any  
abnormality has been detected during self-diagnosis)  
Reset  
• Sel  
To erase the camera’s self-diagnostic data  
To display the data read from the camera in order (No display when  
no abnormality has been detected during self-diagnosis)  
Bars  
Bars Type  
To select the type of color-bar signals:  
SMPTE(SPLIT)/SNG/FF 75%/FF 100%  
File  
Scene Trans  
CAM->MS  
MS->CAM  
To transfer a scene file (from the camera to the Memory Stick)  
To transfer a scene file (from the Memory Stick to the camera)  
To copy the status of the master unit to slave units  
To set the volume of the call buzzer  
Copy to Slave  
RCP Config RCP  
Adjusting  
Buzzer  
• Call  
Volume  
• Touch  
• Switch  
To set the responding sound volume of the touch panel  
To set the confirmation sound volume of the self-illuminating  
switches  
• Master  
To set the total buzzer sound volume  
Call Buzzer  
Touch Click  
SW Click  
All Off  
To turn the call buzzer ON/OFF  
To turn the responding sound of the touch panel ON/OFF  
To turn the confirmation sound of switches ON/OFF  
To turn the volume of all the buzzers ON/OFF  
To set the brightness of respective LEDs  
LED Bright  
• Switch  
• Tally  
• Other  
• Master  
To set the brightness of the all LEDs of the unit  
RE Setting  
VR Setting  
BLACK/FLARE  
To select the function for the BLACK/FLARE knob  
Black: Black balance adjustment  
Flare: Flare balance adjustment  
VR STD Mode  
To select the initial settings for IRIS or MASTER BLACK  
adjustment mode: Absolute or Relative  
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value  
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest  
response position)  
a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
2ndary menu Submenu  
Control item  
Function  
RCP Config VR Setting  
(cont.)  
M. Black VR  
(Only available for RCP-D50) To select the response rate of the  
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,  
and 1/4, where 1/1 is the quickest response position)  
(cont.)  
Information  
Cable Comp  
SW Setting  
To display the software version of the unit  
Cable Length  
To set the length of the remote cable (5 m/25 m/50 m)  
• SW Assign/Sel  
To allocate a function to the ASSIGN button  
No Assign: No assignment  
Black/Flare: Switching the function of the BLACK/FLARE knobs  
Black Auto: ON/OFF of the auto black (Not operative)  
ATW: ON/OFF of the auto tracing white balance  
TLCS: ON/OFF of the total level control function  
DynaLatitude: ON/OFF of the DynaLatitude function (Not operative)  
CAM No.  
CAM ID->No.  
To switch the display of the camera number/tally indication of the  
unit between camera ID and camera number  
• No.  
To select the camera number to be displayed on the RCP  
Date adjustment of the clock built into the unit  
Date/Time  
Set  
Date  
• Year  
• Month  
• Day  
Set  
Cancel  
• Hour  
• Minute  
• Second  
Set  
Time  
Time adjustment of the clock built into the unit  
Cancel  
Gain  
Comm Link  
To turn ON/OFF command link operation (activation of several  
cameras at the same time) of the gain  
Shutter  
To turn ON/OFF command link operation of shutter settings  
R/B White  
To turn ON/OFF command link operation of the white R/B  
adjustment  
R/B Black  
To turn ON/OFF command link operation of the black R/B  
adjustment  
R/G/B Flare  
Protocol Type a)  
To turn ON/OFF command link operation of the flare R/G/B  
adjustment  
Comm Type  
To set the connection mode  
P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,  
CCU-D50, DSR-300/370/390/500/570  
P Type 7: When connected to CCU-TX50  
a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu  
2ndary menu Submenu  
Control item  
Function  
RCP Config Security  
(cont.)  
Engineer Mode  
To set whether to display “Status”, “Menu Set”, and “Code No.” or  
not (With Engineer Mode ON, all operative menu items are  
displayed regardless of the Advance Mode setting.)  
Status a)  
Advance Mode  
To switch between the Normal Setting mode and Advanced Setting  
mode of the menu  
Screen Md Enable  
Pan/Tilt Enable  
Power On Active  
To set whether switching between 4:3 and 16:9 is enabled or not  
To set whether panning/tilting adjustment is enabled or not  
To specify the Panel Active and Iris/Master Black Active statuses  
when the unit is started up  
Full Active: To set the unit to the Panel Active status when started up  
IRIS/M.Black: To set the unit to the Iris/Master Black Active  
status when started up  
Lock: To set the unit to the Panel Lock status when started up  
Keep state: To set the unit to the previous state when started up  
Panel Active Lock  
To set whether to use the Panel Active Lock function with a security  
code or not.  
Disable: Not to use the Panel Active Lock function  
Enable: To use the Panel Active Lock function by specifying a  
new security code  
Enable (Engineer Code): To use the Panel Active Lock function  
with the same security code as that for Engineer Mode  
Code Change  
To change the security code for Panel Active Lock (displayed only  
when a security code for Panel Active Lock has been set)  
Menu Set a)  
Code No. a)  
To select an item to be displayed on the function menu. Select the  
number (1-7) using • Cur, and select the item with • Sel: White,  
Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black  
STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White  
Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump  
Code No.  
To enable/disable the security code setting for Engineer Mode  
Code Change  
To change the security code for Engineer Mode (displayed only  
when a security code for Engineer Mode has been set)  
LCD  
LCD Brightness/Contrast  
• Bright  
• Cont  
To set the brightness of the LCD of the unit  
To set the contrast of the LCD of the unit  
LCD Moni. LCD Monitor  
• Bright  
To set the brightness of the LCD of the unit when displaying the  
camera picture  
Brightness/Contrast  
• Cont  
To set the contrast of the LCD of the unit when displaying the  
camera picture  
Memory Stick Memory Stick  
Format  
To perform formatting of the Memory Stick  
a) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Items with the DXC-D30/D35-Series Cameras  
z
The “Control items” marked with are those assigned  
to the control knobs. The other items are operated on  
the menu display.  
The items displayed differ according to whether the  
unit is in Advanced Setting mode or in Normal Setting  
mode. The items shaded (  
) in the table below are  
displayed only in Advanced Setting mode.  
Switching between Normal Setting mode and  
Advanced Setting mode is performed in RCP Config  
(Security Status) on the OTHERS menu.  
Paint menu (with the DXC-D30/D35 series)  
Paint menu consists of pages 1 to 4.  
Paint 4 can also be selected by pressing the PAINT 3  
button.  
You can select page 1 through 3 directly by pressing  
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.  
Pressing vor V of the page selected with a MENU  
button flip pages 1 through 4 in sequence.  
Page  
Menu  
Submenu  
Control item  
White Preset  
Auto  
Function  
Paint 1  
White  
To retrieve the preset white balance settings in the camera  
To select the auto white balance adjustment mode  
To select the manual white balance adjustment mode  
Manual  
ATW  
To turn ON/OFF the Auto Tracing White function (which  
automatically adjusts the white balance when lighting conditions  
change)  
• R  
• B  
To adjust the gain for the R signal in the white when Manual is  
pressed  
To adjust the gain for the B signal in the white when Manual is  
pressed  
Black  
Auto  
To select the auto black balance adjustment mode  
To select the manual black balance adjustment mode  
To adjust the gain of the R signal in the black  
To adjust the gain of the B signal in the black  
To adjust the master black  
Manual  
• R  
• B  
• Master  
Flare Off  
Flare  
To turn the flare (black level when flare is generated) correction  
function ON/OFF  
• R  
• G  
• B  
DL  
To adjust the amount of flare correction for the R signal  
To adjust the amount of flare correction for the G signal  
To adjust the amount of flare correction for the B signal  
Gamma/Knee  
To turn ON/OFF the DynaLatitude function (for automatically  
setting the contrast between the bright and dark areas by detecting  
the levels of the subject in these areas)  
Knee Preset  
Auto Knee  
• Gamma  
To turn ON/OFF the mode that uses the preset knee correction value  
To turn the Auto Knee circuit ON/OFF  
To adjust the gamma level  
• Knee Point  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Knee Slope  
To adjust the knee slope (amount of knee correction)  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Page  
Menu  
Submenu  
Control item  
• Level  
Function  
Paint 2  
Detail  
Detail 1  
To adjust the detail (contour correction) level  
• H/V Ratio  
To adjust the ratio of V (vertical) detail to H (horizontal) detail in  
detail correction. As the value becomes larger, the V detail ratio  
increases.  
• Frequency  
To adjust the boost frequency (thickness of contour lines) for the  
detail correction  
• V-Limit  
To adjust the limit value for vertical detail  
Detail 2  
• Crispening  
To adjust the crispening level (appropriate level at which details of  
noise signals are removed)  
• Level Dep  
• High L.  
To adjust the level dependence (level at which the detail signal starts  
being suppressed)  
To adjust the amount of suppression of highlight detail (detail added  
to a high-luminance area)  
• AFT GAM  
Aperture  
To adjust the amount of detail added after gamma correction  
To turn the aperture correction ON/OFF  
Detail 3  
Knee Apert  
To turn ON/OFF the detail correction to the level higher than the  
knee point  
• Aperture  
To adjust the amount of aperture correction  
• Knee Apert  
To adjust the amount of detail correction to the level higher than the  
knee point  
Cross Color  
Skin Detail  
Comb Filter R  
Comb Filter G  
• CCS Level  
To turn the red comb filter in the detail circuit ON/OFF. If OFF is  
selected, clarity improves, but cross color increases.  
To turn the green comb filter in the detail circuit ON/OFF. If OFF is  
selected, clarity improves, but cross color increases.  
To adjust the cross color suppress level to suppress the phenomenon  
of color jittering or coloring when a minutely striped pattern is shot  
Skin Detail 1 Detail Gate  
Skin DTL  
To turn ON/OFF the skin gate area (target color range of skin detail  
correction or skin matrix adjustment)  
To turn the skin detail function (which suppresses the contour  
correction in the selected area) ON/OFF  
Auto Skin  
The unit will go to Standby mode when this button is pressed, and  
will automatically start obtaining the skin gate area data when Start  
is pressed.  
• Level  
• Size  
To adjust the amount of skin detail correction. As the value becomes  
larger, the amount of detail in the skin gate area decreases.  
To adjust the R–Y and B–Y ranges of the skin gate area (for setting  
each range to the same value at the same time)  
• R-Y  
• B-Y  
To adjust the R–Y range of the skin gate area  
To adjust the B–Y range of the skin gate area  
To turn the display of skin gate area ON/OFF  
To turn the skin detail function ON/OFF  
Skin Detail 2 Skin Gate  
Skin DTL  
Auto Skin  
The unit will go to Standby mode when this button is pressed, and  
will automatically start obtaining the skin gate area data when Start  
is pressed.  
• Level  
• Posi  
To adjust the skin detail level  
To adjust the R–Y and B–Y position of the skin detail gate area (for  
setting each range to the same value at the same time)  
• R-Y  
• B-Y  
To adjust the R–Y position of the skin detail gate area  
To adjust the B–Y position of the skin detail gate area  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page  
Menu  
Submenu  
Black  
Control item  
Function  
Paint 2  
(cont.)  
Black STR  
• Level  
To adjust the black stretch level  
Stretch 1  
• Stretch Level/Point 1 To adjust the upper limit of the signal levels that activate the black  
stretch function  
• Stretch Level/Point 2 To adjust the lower limit of the signal levels that activate the black  
stretch function  
Black  
• Level  
To adjust the black stretch level  
Stretch 2  
• Compress Level/  
Point 1  
To adjust the upper limit of the signal levels that activate the black  
compress function  
• Compress Level/  
Point 2  
To adjust the lower limit of the signal levels that activate the black  
compress function  
Paint 3  
Knee/DL  
DL  
To turn ON/OFF the DynaLatitude function (for automatically  
setting the contrast between the bright and dark areas by detecting  
the levels of the subject in these areas)  
Knee Preset  
Auto Knee  
• DL  
To turn ON/OFF the mode that uses the preset knee correction value  
To turn the Auto Knee function ON/OFF  
To select the level of the DynaLatitude effects (Low/STD/High)  
• Point  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Slope  
• Master  
Init 3.5  
To adjust the knee slope (amount of knee correction)  
To adjust the master gamma  
Gamma  
To set the value of the initial part of the gamma curve for low  
brightness to 3.5  
Init 4.0  
To set the value of the initial part of the gamma curve for low  
brightness to 4.0  
• R  
To adjust the level of the R gamma  
To adjust the level of the B gamma  
To turn the matrix ON/OFF  
• B  
Matrix  
Matrix 1  
Matrix Off  
• Hue  
To adjust the hue of the linear matrix  
To adjust the color saturation of the linear matrix  
• Sat  
Matrix 2  
Matrix 3  
• R-G/• G-B/• B-R  
To adjust the color tone for the R–G, G–B, or B–R elements of the  
matrix  
• R-B/• G-R/• B-G  
To adjust the color tone for the R–B, G–R, or B–G elements of the  
matrix  
Skin Matrix  
Skin Matrix  
• Hue  
To select the skin matrix function ON/OFF  
To adjust the hue of the designated area  
• Sat  
To adjust the color saturation of the designated area  
Paint 4  
White Clip  
TLCS  
• Master  
To adjust the amount of white clip (the highest white level). As the  
value becomes larger, the output level decreases.  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
• AGC/C.Point  
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris  
control is switched to AGC (auto gain control)  
• AGC/Limit  
• AE/C.Point  
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/18  
dB) adjustment  
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris  
control is switched to the AE (auto exposure)  
Auto Iris  
STD  
To select the standard auto iris mode  
Spot Light  
Back Light  
AI  
To select the auto iris mode for shooting spot-lit subjects  
To select the auto iris mode for shooting back-lit subjects  
To select the intelligent auto iris mode a)  
a) Only with models with the AI function  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Page  
Menu  
Submenu  
Control item  
TLCS  
Function  
Paint 4  
(cont.)  
CLS/EVS  
To turn the TLCS (total level control) function ON/OFF  
To turn the shutter function ON/OFF  
Shutter  
CLS  
To turn the CLS (clear scan) function (which reduces noise on the  
horizontal scan lines when the monitor screen connected to a PC is  
shot) ON/OFF  
EVS  
To turn the EVS mode (which reduces flicker by increasing the  
vertical resolutions) ON/OFF  
• Shutter  
• CLS  
To select the shutter speed  
To adjust the CLS frequency  
Function menu (with the DXC-D30/D35 series)  
Menu  
Submenu Control item  
Jump menu 1  
Function  
Operation  
To jump to the adjustment screen designated for Menu 1 in Menu Set a)(Default: White of Paint 1)  
To jump to the adjustment screen designated for Menu 2 in Menu Set a) (Default:Black of Paint 1)  
To jump to the adjustment screen designated for Menu 3 in Menu Set a) (Default: Flare of Paint 1)  
Jump menu 2  
Jump menu 3  
Jump menu 4  
To jump to the adjustment screen designated for Menu 4 in Menu Set a) (Default: Gamma/Knee  
of Paint 1)  
Jump menu 5  
Jump menu 6  
To jump to the adjustment screen designated for Menu 5 in Menu Set a) (Default: Detail of Paint 2)  
To jump to the adjustment screen designated for Menu 6 in Menu Set a) (Default: Skin Detail of  
Paint 2)  
Jump menu 7  
To jump to the adjustment screen designated for Menu 7 in Menu Set a) (Default: Matrix of Paint  
3)  
Shutter  
• Shutter  
CLS  
To turn the shutter function ON/OFF  
To select the shutter speed  
To turn the CLS (clear scan) function ON/OFF  
To select the CLS frequency  
• CLS  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To select the master gain value among –3/0/3/6/9/12/18/18+DPR/24/24+DPR/HYPER Gain  
To turn the skin detail function ON/OFF  
• Master Gain  
SW  
Page1  
Skin Detail  
Detail Gate  
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail  
correction or the skin matrix adjustment)  
ATW  
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white  
balance when lighting conditions change) ON/OFF  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To turn the Auto Knee function ON/OFF  
Auto Knee  
Skin Matrix  
Flare Off  
To turn the skin matrix function ON/OFF  
To turn the flare correction function ON/OFF (OFF while the button is lit)  
Page 2  
Knee Aperture To turn ON/OFF the detail correction to the level higher than the knee point  
Aperture  
DL  
To turn the aperture correction ON/OFF  
To turn ON/OFF the DynaLatitude function (for automatically setting the contrast between the  
bright and dark areas by detecting the levels of the subject in these areas)  
White Clip Off To turn the white clip function ON/OFF (OFF while the button is lit)  
Detail Off  
Gamma Off  
Matrix Off  
To turn the detail adjustment function ON/OFF (OFF while the button is lit)  
To turn the gamma adjustment function ON/OFF (OFF while the button is lit)  
To turn the linear matrix adjustment function ON/OFF (OFF while the button is lit)  
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
Lens/Pan a)  
Submenu Control item  
Option 1  
Function  
To turn the option control function 1 ON/OFF  
To turn the option control function 2 ON/OFF  
To adjust the focus  
Option 2  
• Focus b)  
• Zoom b)  
To adjust the zoom  
• Pan c)  
• Tilt c)  
To adjust panning of the tripod head  
To adjust tilting of the tripod head  
a) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.  
b) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.  
c) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.  
OTHERS menu (with the DXC-D30/D35 series)  
Menu  
2ndary menu Submenu  
Control item  
Function  
Adjusting  
White Shading  
• R  
To adjust the V white shading (vertical variation of the white) of the  
R signal  
• G  
To adjust the V white shading of the G signal  
To adjust the V white shading of the B signal  
• B  
Camera  
Config  
Camera ID  
CAM ID IND  
To turn the camera ID display ON/OFF while the camera is in Color  
Bars mode  
Clock IND  
• Char  
Switching of the clock indication  
Cam: To always display the clock indication  
Bars: To display only when the camera color bars are displayed  
Off: No clock indication  
To select characters when entering a camera ID (alphanumerics,  
symbols, and space)  
• Cur  
To move the cursor when entering a camera ID (eight characters)  
To register the entered camera ID  
ID SET  
Center Marker  
Center Marker  
Safety Zone  
Screen Mode  
Req  
To turn the center marker ON/OFF  
To set the safety zone (90%/80%/OFF)  
To select the Screen mode (4:3/16:9)  
Screen Mode a)  
Diag  
To request camera’s self-diagnostic data (available only when any  
abnormality has been detected during self-diagnosis)  
Reset  
• Sel  
To erase the camera’s self-diagnostic data  
To display the data read from the camera in order (No display when  
no abnormality has been detected during self-diagnosis)  
Bars  
Bars Type  
To select the type of color-bar signals:  
SMPTE (SPLIT)/SNG/FF 75%/FF 100%  
File  
Setup File  
To store/retrieve a setup file  
Copy to Slave  
To copy the scene files to slave units  
To set the volume of the call buzzer  
To set the responding sound volume of the touch panel  
RCP Config RCP  
Adjusting  
Buzzer  
Volume  
• Call  
• Touch  
• Switch  
To set the confirmation sound volume of the self-illuminating  
switches  
• Master  
To set the total buzzer sound volume  
Call Buzzer  
Touch Click  
SW Click  
All Off  
To turn the call buzzer ON/OFF  
To turn the responding sound of the touch panel ON/OFF  
To turn the confirmation sound of switches ON/OFF  
To turn the volume of all the buzzers ON/OFF  
a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu  
2ndary menu Submenu  
Control item  
• Switch  
Function  
RCP Config RCP  
(cont.) Adjusting  
LED Bright  
To set the brightness of respective LEDs  
• Tally  
(cont.)  
• Other  
• Master  
To set the brightness of the all LEDs of the unit  
RE Setting  
BLACK/FLARE  
To select the function for the BLACK/FLARE knob  
Black: Black balance adjustment  
Flare: Flare balance adjustment  
VR Setting  
VR STD Mode  
To select the initial settings for IRIS or MASTER BLACK  
Adjustment mode: Absolute or Relative  
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value  
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest  
response position)  
M. Black VR  
(Only available for RCP-D50) To select the response rate of the  
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,  
and 1/4, where 1/1 is the quickest response position)  
Information  
Cable Comp  
SW Setting  
To display the software version of the unit  
Cable Length  
To set the length of the remote cable (5 m/25 m/50 m)  
• SW Assign/Sel  
To allocate a function to the ASSIGN button  
No Assign: No assignment  
Black/Flare: Switching the function of the BLACK/FLARE knobs  
Black Auto: ON/OFF of the auto black  
ATW: ON/OFF of the auto tracing white balance  
TLCS: ON/OFF of the total level control function  
DynaLatitude: ON/OFF of the DynaLatitude function  
CAM No.  
CAM ID->No.  
To switch the display of the camera number/tally indication of the  
unit between camera ID and camera number  
• No.  
To select the camera number to be displayed on the RCP  
Date adjustment of the clock built into the unit  
Date/Time  
Set  
Date  
• Year  
• Month  
• Day  
Set  
Cancel  
• Hour  
• Minute  
• Second  
Set  
Time  
Time adjustment of the clock built into the unit  
Cancel  
Gain  
Comm Link  
To turn ON/OFF command link operation (activation of several  
cameras at the same time) of the gain  
Shutter  
To turn ON/OFF command link operation of shutter settings  
R/B White  
To turn ON/OFF command link operation of the white R/B  
adjustment  
R/B Black  
To turn ON/OFF command link operation of the black R/B  
adjustment  
R/G/B Flare  
Protocol Type a)  
To turn ON/OFF command link operation of the flare R/G/B  
adjustment  
Comm Type  
To set the connection mode  
P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,  
CCU-D50, DSR-300/370/390/500/570  
P Type 7: When connected to CCU-TX50  
a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
2ndary menu Submenu  
Control item  
Function  
RCP Config Security  
(cont.)  
Engineer Mode  
To set whether to display “Status”, “Menu Set”, and “Code No.” or  
not (With Engineer Mode ON, all operative menu items are  
displayed regardless of the Advance Mode setting.)  
Status a)  
Advance Mode  
To switch between the Normal Setting mode and Advanced Setting  
mode of the menu  
Screen Md Enable  
Pan/Tilt Enable  
Power On Active  
To set whether switching between 4:3 and 16:9 is enabled or not  
To set whether panning/tilting adjustment is enabled or not  
To specify the Panel Active and Iris/Master Black Active statuses  
when the unit is started up  
Full Active: To set the unit to the Panel Active status when started up  
IRIS/M.Black: To set the unit to the Iris/Master Black Active  
status when started up  
Lock: To set the unit to the Panel Lock status when started up  
Keep state: To set the unit to the previous state when started up  
Panel Active Lock  
To set whether to use the Panel Active Lock function with a security  
code or not.  
Disable: Not to use the Panel Active Lock function  
Enable: To use the Panel Active Lock function by specifying a  
new security code  
Enable (Engineer Code): To use the Panel Active Lock function  
with the same security code as that for Engineer Mode  
Code Change  
To change the security code for Panel Active Lock (displayed only  
when a security code for Panel Active Lock has been set)  
Menu Set a)  
Code No. a)  
To select an item to be displayed on the function menu. Select the  
number (1-7) using • Cur, and select the item with • Sel: White,  
Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black  
STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White  
Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump  
Code No.  
To enable/disable the security code setting for Engineer Mode  
Code Change  
To change the security code for Engineer Mode (displayed only  
when a security code for Engineer Mode has been set)  
LCD  
LCD Brightness/Contrast  
• Bright  
• Cont  
To set the brightness of the LCD of the unit  
To set the contrast of the LCD of the unit  
LCD Moni. LCD Monitor  
• Bright  
To set the brightness of the LCD of the unit when displaying the  
camera picture  
Brightness/Contrast  
• Cont  
To set the contrast of the LCD of the unit when displaying the  
camera picture  
Memory Stick Memory Stick  
Format  
To perform formatting of the Memory Stick  
a) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu Items with the DXC-637-Series Cameras  
z
The “Control items” marked with are those assigned  
to the control knobs. The other items are operated on  
the menu display.  
The items displayed differ according to whether the  
unit is in Advanced Setting mode or in Normal Setting  
mode. The items shaded (  
) in the table below are  
To operate the DXC-637-series cameras from this unit,  
it is necessary to connect the camera and this unit via  
the CCU-TX7.  
displayed only in Advanced Setting mode.  
Switching between Normal Setting mode and  
Advanced Setting mode is performed in RCP Config  
(Security Status) on the OTHERS menu.  
Paint menu (with the DXC-637 series)  
Paint menu consists of pages 1 to 3.  
Page  
Menu  
Control item  
White Preset  
Auto  
Function  
Paint 1  
White  
To retrieve the preset white balance settings in the camera  
To select the auto white balance adjustment mode a)  
To select the manual white balance adjustment mode a)  
Manual  
ATW  
To turn ON/OFF the Auto Tracing White function (which  
automatically adjusts the white balance when lighting conditions  
change)  
• R  
• B  
To adjust the gain for the R signal in the white when Manual is  
pressed  
To adjust the gain for the B signal in the white when Manual is  
pressed  
Black  
Auto  
To select the auto black balance adjustment mode a)  
To select the manual black balance adjustment mode a)  
To adjust the gain of the R signal in the black  
To adjust the gain of the B signal in the black  
To adjust the master black  
Manual  
• R  
• B  
• Master  
Knee Preset  
Auto Knee  
• Knee Point  
Gamma/Knee  
To turn ON/OFF the mode that uses the preset knee correction value  
To turn the Auto Knee circuit ON/OFF  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
Paint 2  
Paint 3  
Detail  
• Level  
To adjust the detail (contour correction) level  
Knee/DL  
Knee Preset  
Auto Knee  
• Point  
To turn ON/OFF the mode that uses the preset knee correction value  
To turn the Auto Knee function ON/OFF  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
Matrix  
• Matrix  
To select the Matrix Adjustment mode  
STD: Standard  
FL: For shooting under fluorescent light  
High Sat: High saturation (increasing the saturation of primary  
colors)  
a) The Auto/Manual setting for Black is synchronized with that for White.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function menu (with the DXC-637 series)  
Menu  
Control item  
Jump menu 1  
Jump menu 2  
Jump menu 3  
Jump menu 4  
Function  
Operation  
To jump to the adjustment screen designated for Menu 1 in Menu Set a)(Default: White of Paint 1)  
To jump to the adjustment screen designated for Menu 2 in Menu Set a) (Default:Black of Paint 1)  
To jump to the adjustment screen designated for Menu 3 in Menu Set a) (Default: Flare of Paint 1)  
To jump to the adjustment screen designated for Menu 4 in Menu Set a) (Default: Gamma/Knee  
of Paint 1)  
Jump menu 5  
Jump menu 6  
To jump to the adjustment screen designated for Menu 5 in Menu Set a) (Default: Detail of Paint 2)  
To jump to the adjustment screen designated for Menu 6 in Menu Set a) (Default: Skin Detail of  
Paint 2)  
Jump menu 7  
To jump to the adjustment screen designated for Menu 7 in Menu Set a) (Default: Matrix of Paint  
3)  
Shutter  
• Shutter  
CLS  
To turn the shutter function ON/OFF  
To select the shutter speed  
To turn the CLS (clear scan) function ON/OFF  
To select the CLS frequency  
• CLS  
• Master Gain  
ATW  
To select the master gain setting from among Hi/Mid/Low  
SW  
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white  
balance when lighting conditions change) ON/OFF  
Auto Knee  
Option 1  
Option 2  
• Focus c)  
• Zoom c)  
• Pan d)  
To turn the Auto Knee function ON/OFF  
To turn the option control function 1 ON/OFF  
To turn the option control function 2 ON/OFF  
To adjust the focus  
Lens/Pan b)  
To adjust the zoom  
To adjust panning of the tripod head  
To adjust tilting of the tripod head  
• Tilt d)  
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.  
b) The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.  
c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.  
d) To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
OTHERS menu (with the DXC-637 series)  
Menu  
2ndary menu Submenu  
Control item  
Function  
Camera  
Config  
Title ID  
Title IND  
To turn the title display ON/OFF while the camera is in Color Bars  
mode  
Clock IND  
Switching of the clock indication  
Cam: To always display the clock indication  
Off: No clock indication  
File  
Copy to Slave  
To copy the status of the master unit to slave units  
To set the volume of the call buzzer  
RCP Config RCP  
Adjusting  
Buzzer  
• Call  
Volume  
• Touch  
• Switch  
To set the responding sound volume of the touch panel  
To set the confirmation sound volume of the self-illuminating  
switches  
• Master  
To set the total buzzer sound volume  
Call Buzzer  
Touch Click  
SW Click  
All Off  
To turn the call buzzer ON/OFF  
To turn the responding sound of the touch panel ON/OFF  
To turn the confirmation sound of switches ON/OFF  
To turn the volume of all the buzzers ON/OFF  
To set the brightness of respective LEDs  
LED Bright  
• Switch  
• Tally  
• Other  
• Master  
To set the brightness of the all LEDs of the unit  
VR Setting  
VR STD Mode  
To select the initial settings for IRIS or MASTER BLACK  
Adjustment mode: Absolute or Relative  
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value  
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest  
response position)  
M. Black VR  
(Only available for RCP-D50) To select the response rate of the  
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,  
and 1/4, where 1/1 is the quickest response position)  
Information  
Cable Comp  
SW Setting  
To display the software version of the unit  
Cable Length  
To set the length of the remote cable (5 m/25 m/50 m)  
• SW Assign/Sel  
To allocate a function to the ASSIGN button  
No Assign: No assignment  
Black/Flare: Switching the function of the BLACK/FLARE knobs  
Black Auto: ON/OFF of the auto black (not operative)  
ATW: ON/OFF of the auto tracing white balance  
TLCS: ON/OFF of the total level control function (not operative)  
DynaLatitude: ON/OFF of the DynaLatitude function (not operative)  
CAM No.  
• No.  
To select the camera number to be displayed on the RCP  
Date adjustment of the clock built into the unit  
Date/Time Set Date  
• Year  
• Month  
• Day  
Set  
Cancel  
• Hour  
• Minute  
• Second  
Set  
Time  
Time adjustment of the clock built into the unit  
Cancel  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
2ndary menu Submenu  
Control item  
Function  
RCP Config Comm Link  
(cont.)  
Gain  
To turn ON/OFF command link operation (activation of several  
cameras at the same time) of the gain  
Shutter  
To turn ON/OFF command link operation of shutter settings  
R/B White  
To turn ON/OFF command link operation of the white R/B  
adjustment  
R/B Black  
To turn ON/OFF command link operation of the black R/B  
adjustment  
R/G/B Flare  
Protocol Type a)  
To turn ON/OFF command link operation of the flare R/G/B  
adjustment  
Comm Type  
Security  
To set the connection mode  
P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,  
CCU-D50, DSR-300/370/390/500/570  
P Type 7: When connected to CCU-TX50  
Engineer Mode  
Status b)  
To set whether to display “Status”, “Menu Set”, and “Code No.” or  
not (With Engineer Mode ON, all operative menu items are  
displayed regardless of the Advance Mode setting.)  
Advance Mode  
To switch between the Normal Setting mode and Advanced Setting  
mode of the menu  
Screen Md Enable  
Pan/Tilt Enable  
Power On Active  
To set whether switching between 4:3 and 16:9 is enabled or not  
To set whether panning/tilting adjustment is enabled or not  
To specify the Panel Active and Iris/Master Black Active statuses  
when the unit is started up  
Full Active: To set the unit to the Panel Active status when started up  
IRIS/M.Black: To set the unit to the Iris/Master Black Active  
status when started up  
Lock: To set the unit to the Panel Lock status when started up  
Keep state: To set the unit to the previous state when started up  
Panel Active Lock  
To set whether to use the Panel Active Lock function with a security  
code or not.  
Disable: Not to use the Panel Active Lock function  
Enable: To use the Panel Active Lock function by specifying a  
new security code  
Enable (Engineer Code): To use the Panel Active Lock function  
with the same security code as that for Engineer Mode  
Code Change  
To change the security code for Panel Active Lock (displayed only  
when a security code for Panel Active Lock has been set)  
Menu Set b)  
Code No. b)  
To select an item to be displayed on the function menu. Select the  
number (1-7) using • Cur, and select the item with • Sel: White,  
Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black  
STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White  
Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump  
Code No.  
To enable/disable the security code setting for Engineer Mode  
Code Change  
To change the security code for Engineer Mode (displayed only  
when a security code for Engineer Mode has been set)  
LCD  
LCD Brightness/Contrast  
• Bright  
• Cont  
To set the brightness of the LCD of the unit  
To set the contrast of the LCD of the unit  
LCD Moni. LCD Monitor  
• Bright  
To set the brightness of the LCD of the unit when displaying the  
camera picture  
Brightness/Contrast  
• Cont  
To set the contrast of the LCD of the unit when displaying the  
camera picture  
Memory Stick Memory Stick  
Format  
To perform formatting of the Memory Stick  
a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.  
b) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu Items with the CCU-TX50  
z
The “Control items” marked with are those assigned  
to the control knobs. The other items are operated on  
the menu display.  
The items displayed differ according to whether the  
unit is in Advanced Setting mode or in Normal Setting  
mode. The items shaded (  
) in the table below are  
displayed only in Advanced Setting mode.  
Switching between Normal Setting mode and  
Advanced Setting mode is performed in RCP Config  
(Security Status) on the OTHERS menu.  
Paint menu (with the CCU-TX50)  
Paint menu consists of pages 1 to 5.  
Paint 4 and 5 can also be selected in sequence by  
pressing the PAINT 3 button.  
You can select page 1 through 3 directly by pressing  
the MENU buttons, PAINT 1, PAINT 2, or PAINT 3.  
Pressing vor V of the page selected with a MENU  
button flip pages 1 through 5 in sequence.  
Page  
Menu  
Submenu  
Control item  
White Preset  
Memory A  
Function  
Paint 1  
White  
To retrieve the white balance settings preset by the camera  
To retrieve the white-balance settings stored in Memory A. The  
retrieved settings can be adjusted in Auto or Manual mode (the  
adjusted values are stored in Memory A).  
Memory B  
ATW  
To retrieve the white-balance settings stored in Memory B. The  
retrieved settings can be adjusted in Auto or Manual mode (the  
adjusted values are stored in Memory B).  
To turn ON/OFF the Auto Tracing White function (which  
automatically adjusts the white balance when lighting conditions  
change)  
• R  
• B  
To adjust the gain of the R signal in the white when Memory A or  
Memory B is pressed  
To adjust the gain of the B signal in the white when Memory A or  
Memory B is pressed  
Black  
Flare  
• R  
To adjust the gain of the R signal in the black  
To adjust the gain of the B signal in the black  
To adjust the master black  
• B  
• Master  
Flare Off  
To turn the flare (black level when flare is generated) correction  
function ON/OFF  
• R  
To adjust the amount of flare correction for the R signal  
To adjust the amount of flare correction for the G signal  
To adjust the amount of flare correction for the B signal  
To turn the Auto Knee circuit ON/OFF  
• G  
• B  
Gamma/Knee  
Auto Knee  
• Gamma  
• Blk Gamma  
• Knee Point  
To adjust the gamma level  
To adjust the black gamma level  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Knee Slope  
To adjust the knee slope (amount of knee correction)  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Page  
Menu  
Submenu  
Control item  
• Level  
Function  
Paint 2  
Detail  
Detail 1  
To adjust the detail (contour correction) level  
• H/V Ratio  
To adjust the ratio of V (Vertical) detail to H (Horizontal) detail in  
detail correction. As the value becomes larger, the V detail ratio  
increases.  
• Frequency  
• Crispening  
• Level Dep  
• CCS Level  
Detail Gate  
Skin DTL  
To adjust the boost frequency (thickness of contour lines) for the  
detail correction  
Detail 2  
To adjust the crispening level (appropriate level at which details of  
noise signals are removed)  
To adjust the level dependence (level at which the detail signal starts  
being suppressed)  
Cross Color  
Skin Detail  
To adjust the cross color suppress level to suppress the phenomenon  
of color jittering or coloring when a minutely striped pattern is shot  
To turn ON/OFF the skin gate area (target color range of skin detail  
correction or skin matrix adjustment)  
To turn the skin detail function (which suppresses the contour  
correction in the selected area) ON/OFF  
Auto Skin  
The unit will go to Standby mode when this button is pressed, and  
will automatically start obtaining the skin gate area data when Start  
is pressed.  
• Level  
To adjust the amount of skin detail correction. As the value becomes  
larger, the amount of detail in the skin gate area decreases.  
• Phase  
• Width  
• Sat  
To adjust the color phase of the designated area  
To adjust the color width of the designated area  
To adjust the color saturation of the designated area  
To adjust the level of the black R gamma  
To adjust the level of the black B gamma  
To adjust the master black gamma  
Black Gamma  
Knee/DL  
• R  
• B  
• Master  
Auto Knee  
• Point  
Paint 3  
To turn the auto knee ON/OFF  
To adjust the level at which the knee correction starts. As the value  
becomes larger, the start level decreases, which enhances the knee  
correction effects.  
• Slope  
• R  
To adjust the knee slope (amount of knee correction)  
To adjust the level of the R gamma  
Gamma  
Matrix  
• B  
To adjust the level of the B gamma  
• Master  
• Hue  
• Sat  
To adjust the master gamma  
Matrix 1  
To adjust the hue of the linear matrix  
To adjust the color saturation of the linear matrix  
• Matrix  
To select the Matrix Adjustment mode  
STD: Standard  
FL: For shooting under fluorescent light  
High Sat: High saturation (increasing the saturation of primary  
colors)  
Matrix 2  
Matrix 3  
• R-G/• G-B/• B-R  
To adjust the color tone for the R–G, G–B, or B–R elements of the  
matrix  
• Matrix  
To select the Matrix Adjustment mode  
• R-B/• G-R/• B-G  
To adjust the color tone for the R–B, G–R, or B–G elements of the  
matrix  
• Matrix  
Skin Matrix  
• Hue  
To select the Matrix Adjustment mode  
Skin Matrix  
To select the skin matrix function ON/OFF  
To adjust the hue of the designated area  
To adjust the color saturation of the designated area  
• Sat  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Page  
Menu  
Submenu  
Control item  
Function  
Paint 4  
White Clip  
• Master  
To adjust the amount of white clip (the highest white level). As the  
value becomes larger, the output level decreases.  
TLCS  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
• AGC/C.Point  
To set the f-stop value (f-2, f-2.8, f-4, or f-5.6) at which the iris  
control is switched to AGC (auto gain control)  
• AGC/Limit  
• AE/C.Point  
To set the upper limit value for the AGC (3 dB/6 dB/9 dB/12 dB/  
18 dB) adjustment  
To set the f-stop value (f-5.6, f-8, f-11, or f-16) at which the iris  
control is switched to the AE (auto exposure)  
• AE/Limit  
STD  
To set the upper limit value for AE control (100/150/200/250)  
To select the standard auto iris mode  
Auto Iris  
Spot Light  
Back Light  
TLCS  
To select the auto iris mode for shooting spot-lit subjects  
To select the auto iris mode for shooting back-lit subjects  
To turn the TLCS (total level control) function ON/OFF  
To turn the shutter function ON/OFF  
CLS/EVS  
Shutter  
CLS  
To turn the CLS (clear scan) function (which reduces noise on the  
horizontal scan lines when the monitor screen connected to a PC is  
shot) ON/OFF  
EVS  
To turn the EVS mode (which reduces flicker by increasing the  
vertical resolutions) ON/OFF  
• Shutter  
• CLS  
To select the shutter speed  
To adjust the CLS frequency  
To adjust the low key saturation level  
Paint 5  
Low Key Sat  
Auto Knee  
• Level  
Adaptive  
To turn ON/OFF the function that makes the knee correction slope  
smooth to make the gradation natural  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function menu (with the CCU-TX50)  
Menu  
Control item  
Jump menu 1  
Jump menu 2  
Jump menu 3  
Jump menu 4  
Function  
Operation  
To jump to the adjustment screen designated for Menu 1 in Menu Set a)(Default: White of Paint 1)  
To jump to the adjustment screen designated for Menu 2 in Menu Set a) (Default:Black of Paint 1)  
To jump to the adjustment screen designated for Menu 3 in Menu Set a) (Default: Flare of Paint 1)  
To jump to the adjustment screen designated for Menu 4 in Menu Set a) (Default: Gamma/Knee  
of Paint 1)  
Jump menu 5  
Jump menu 6  
To jump to the adjustment screen designated for Menu 5 in Menu Set a) (Default: Detail of Paint 2)  
To jump to the adjustment screen designated for Menu 6 in Menu Set a) (Default: Skin Detail of  
Paint 2)  
Jump menu 7  
To jump to the adjustment screen designated for Menu 7 in Menu Set a) (Default: Matrix of Paint  
3)  
Shutter  
To turn the shutter function ON/OFF  
• Shutter  
CLS  
To select the shutter speed  
To turn the CLS (clear scan) function ON/OFF  
To select the CLS frequency  
• CLS  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To select the master gain value among –3/0/3/6/9/12/18/24/30/36 dB  
To turn the color temperature 5600K ON/OFF  
To turn the skin detail function ON/OFF  
• Master Gain  
5600K  
SW  
Skin Detail  
Detail Gate  
To turn ON/OFF the display for the skin detail gate area (target color range for the skin detail  
correction or the skin matrix adjustment)  
ATW  
To turn the ATW (auto tracing white balance) function (which automatically adjusts the white  
balance when lighting conditions change) ON/OFF  
TLCS  
To turn the TLCS (total level control) function ON/OFF  
To turn the Auto Knee function ON/OFF  
To turn the skin matrix function ON/OFF  
To turn the flare correction function ON/OFF (OFF while the button is lit)  
To turn the option control function 1 ON/OFF  
To turn the option control function 2 ON/OFF  
To adjust the focus  
Auto Knee  
Skin Matrix  
Flare Off  
Option 1  
Option 2  
• Focus c)  
• Zoom c)  
• Pan d)  
Lens/Pan b)  
To adjust the zoom  
To adjust panning of the tripod head  
• Tilt d)  
To adjust tilting of the tripod head  
a) The submenu “Menu Set” can be selected from Security of RCP Config on the OTHERS menu.  
b)The item “Lens/Pan” is displayed when Pan/Tilt Enable is set to ON with Security of RCP Config on the OTHERS menu.  
c) To control the lens from this unit, the optional focus zoom servo unit and the interface unit for the camera adapter and lens are required.  
In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.  
d)To control the tripod head from this unit, an electric tripod head and the interface unit for the camera adapter and tripod head are required.  
In addition, special settings must be made on the connected CA-TX50. For details, consult your Sony dealer.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
OTHERS menu (with the CCU-TX50)  
Menu  
2ndary menu Submenu  
Control item  
Function  
Adjusting  
White Shading  
• R  
To adjust the V white shading (vertical variation of the white) of the  
R signal  
• G  
To adjust the V white shading of the G signal  
To adjust the V white shading of the B signal  
To select the Screen mode (4:3/16:9)  
• B  
Camera  
Config  
Screen Mode a)  
Scene Trans  
Screen Mode  
File  
CAM->MS  
MS->CAM  
• Call  
To transfer a scene file (from the camera to the Memory Stick)  
To transfer a scene file (from the Memory Stick to the camera)  
To set the volume of the call buzzer  
RCP Config RCP  
Adjusting  
Buzzer  
Volume  
• Touch  
To set the responding sound volume of the touch panel  
• Switch  
To set the confirmation sound volume of the self-illuminating  
switches  
• Master  
To set the total buzzer sound volume  
Call Buzzer  
Touch Click  
SW Click  
All Off  
To turn the call buzzer ON/OFF  
To turn the responding sound of the touch panel ON/OFF  
To turn the confirmation sound of switches ON/OFF  
To turn the volume of all the buzzers ON/OFF  
To set the brightness of respective LEDs  
LED Bright  
• Switch  
• Tally  
• Other  
• Master  
To set the brightness of the all LEDs of the unit  
RE Setting  
VR Setting  
BLACK/FLARE  
To select the function for the BLACK/FLARE knob  
Black: Black balance adjustment  
Flare: Flare balance adjustment  
VR STD Mode  
To select the initial settings for IRIS or MASTER BLACK  
adjustment mode: Absolute or Relative  
VR Rel. Scale IRIS VR To select the response rate of the IRIS knob (relative-value  
adjustment rates: 1/1, 1/2, and 1/4, where 1/1 is the quickest  
response position)  
M. Black VR  
(Only available for RCP-D50) To select the response rate of the  
MASTER BLACK knob (relative-value adjustment rates: 1/1, 1/2,  
and 1/4, where 1/1 is the quickest response position)  
Information  
Cable Comp  
SW Setting  
To display the software version of the unit  
Cable Length  
To set the length of the remote cable (5 m/25 m/50 m)  
• SW Assign/Sel  
To allocate a function to the ASSIGN button  
No Assign: No assignment  
Black/Flare: Switching the function of the BLACK/FLARE knobs  
Black Auto: ON/OFF of the auto black (Not operative)  
ATW: ON/OFF of the auto tracing white balance  
TLCS: ON/OFF of the total level control function  
DynaLatitude: ON/OFF of the DynaLatitude function (Not operative)  
CCU character: Switching the CCU-TX50 character pages  
CAM No.  
CAM ID->No.  
• No.  
To switch the display of the camera number/tally indication of the  
unit between camera ID and camera number b)  
To select the camera number to be displayed on the RCP  
a) The item “Screen Mode” is displayed when Screen Md Enable is set to ON with Security of RCP Config on the OTHERS menu.  
b) Camera ID cannot be displayed when connected to the CCU-TX50.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu  
2ndary menu Submenu  
Control item  
• Year  
Function  
RCP Config Date/Time  
Date  
Date adjustment of the clock built into the unit  
(cont.)  
Set  
• Month  
• Day  
Set  
Cancel  
Time  
• Hour  
Time adjustment of the clock built into the unit  
• Minute  
• Second  
Set  
Cancel  
Comm Type  
Security  
Protocol Type a)  
To set the connection mode  
P Type 2: When connected to DXC-D35, DXC-D50, CCU-TX7,  
CCU-D50, DSR-300/370/390/500/570  
P Type 7: When connected to CCU-TX50  
Engineer Mode  
Status b)  
To set whether to display “Status”, “Menu Set”, and “Code No.” or  
not (With Engineer Mode ON, all operative menu items are  
displayed regardless of the Advance Mode setting.)  
Advance Mode  
To switch between the Normal Setting mode and Advanced Setting  
mode of the menu  
Screen Md Enable  
Pan/Tilt Enable  
Power On Active  
To set whether switching between 4:3 and 16:9 is enabled or not  
To set whether panning/tilting adjustment is enabled or not  
To specify the Panel Active and Iris/Master Black Active statuses  
when the unit is started up  
Full Active: To set the unit to the Panel Active status when started up  
IRIS/M.Black: To set the unit to the Iris/Master Black Active  
status when started up  
Lock: To set the unit to the Panel Lock status when started up  
Keep state: To set the unit to the previous state when started up  
Panel Active Lock  
To set whether to use the Panel Active Lock function with a security  
code or not.  
Disable: Not to use the Panel Active Lock function  
Enable: To use the Panel Active Lock function by specifying a  
new security code  
Enable (Engineer Code): To use the Panel Active Lock function  
with the same security code as that for Engineer Mode  
Code Change  
To change the security code for Panel Active Lock (displayed only  
when a security code for Panel Active Lock has been set)  
Menu Set b)  
Code No. b)  
To select an item to be displayed on the function menu. Select the  
number (1-7) using • Cur, and select the item with • Sel: White,  
Black, Flare, Gamma/Knee, Detail, Cross Color, Skin Detail, Black  
STR, Black Gamma, Knee/DL, Gamma, Matrix, Skin Matrix, White  
Clip, TLCS, Auto Iris, CLS/EVS, Auto Knee, Low Key Sat, no jump  
Code No.  
To enable/disable the security code setting for Engineer Mode  
Code Change  
To change the security code for Engineer Mode (displayed only  
when a security code for Engineer Mode has been set)  
a) Be sure to power off the camera system and then power it on again after changing the “Protocol Type” setting.  
b) The items “Status,” “Menu Set,” and “Code No.” are displayed only in Engineer Mode.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Configuration and Basic Menu Operations  
Menu  
2ndary menu Submenu  
Control item  
• Bright  
Function  
LCD  
(cont.)  
LCD Brightness/Contrast  
To set the brightness of the LCD of the unit  
To set the contrast of the LCD of the unit  
• Cont  
LCD Moni. LCD Monitor  
Brightness/Contrast  
• Bright  
To set the brightness of the LCD of the unit when displaying the  
camera picture  
• Cont  
To set the contrast of the LCD of the unit when displaying the  
camera picture  
Memory Stick Memory Stick  
Format  
To perform formatting of the Memory Stick  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings  
RCP Config. Menu  
Setting the Operating Conditions  
of the RCP-D50/D51  
Exit  
RCP  
Adjusting  
RE  
Setting  
By using the RCP Config menu or LCD setting  
display, you can set the built-in clock of the RCP-D50/  
D51 and adjust various conditions of the RCP-D50/  
D51, such as the sound volume of the warning buzzer  
and the brightness of the indicators and LCD.  
Cable  
Comp  
SW  
Setting  
Camera  
No.  
Date  
Time  
Secu-  
rity  
To obtain the LCD setting display, press [LCD].  
Displaying the RCP Config menu/LCD  
setting display  
The LCD setting display (page 48) appears.  
Proceed as follows:  
Setting the Built-in Clock  
1
The RCP-D50/D51 has a built-in clock to record the  
date and time when scene files are saved to Memory  
Sticks.  
PAINT 1 PAINT 2 PAINT 3 SCENE OTHERS FUNCTION MONITOR  
MENU  
To set the clock, proceed as follows:  
Others Menu  
Camera  
1 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
Adjusting  
File  
Config  
2
RCP  
Config  
Memory  
Stick  
LCD  
LCD  
Moni.  
2 Set the menu to Advanced Setting mode.  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
MONITOR  
BRIGHT  
CONTRAST  
The [Status], [Menu Set], and [Code No.]  
buttons are displayed.  
3)Press [Status].  
The Security Status menu appears.  
4)Press [Advance Mode].  
1 Press to light the OTHERS button of the menu  
operation block.  
The OTHERS menu appears.  
3 Press [Date/Time] on the RCP Config menu.  
The current setting is displayed on the Date/Time  
Set menu.  
2 To display RCP Config menu, press  
[RCP Config].  
The RCP Config menu appears.  
Date Time Set Menu  
Exit  
2001/11/17  
(Sat)  
22:12:31  
Date  
Time  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings  
4 To set the date:  
Adjusting the Buzzer Sound  
1)Press and light [Date].  
A buzzer sounds on the RCP-D50/D51 when it  
receives call signal or a panel control is operated.  
When required, you may turn on/off the buzzer or  
adjust the sound volume.  
Date Time Setting  
Exit  
2001/11/17  
(Sat)  
22:12:31  
To adjust the buzzer, proceed as follows:  
1 Press [RCP Adjusting] on the RCP Config menu.  
Date  
Year  
Time  
Set  
Day  
Cancel  
Month  
The RCP adjustment menu appears.  
2001  
8
8
Clear  
Exit  
Buzzer  
Volume  
LED  
Bright  
2)Set the Year, Month and Day with the left three  
control knobs.  
3)Press [Set].  
The set date becomes valid.  
To restore the previous setting, press [Cancel]  
instead of [Set].  
5 To set the time:  
2 Press and light [Buzzer Volume].  
1)Press and light [Time].  
The lower half of the display becomes the Buzzer  
Volume adjustment display.  
Date Time Setting  
Exit  
Clear  
Exit  
2001/11/17  
(Sat)  
22:12:31  
Buzzer  
Volume  
LED  
Bright  
Date  
Hour  
Time  
Minute  
32  
Set  
Second  
25  
Cancel  
Buzzer  
Volume  
Call  
Touch  
Click  
SW  
Click  
All  
Buzzer  
Off  
17  
Call  
Touch  
Switch  
Master  
50  
50  
50  
50  
2)Set the Hour, Minute and Second with the left  
three control knobs.  
3)Press [Set] in synchronization with a time  
signal.  
3 Adjust the levels with the corresponding control  
knobs (50 is the standard value with all items).  
Call: Sound volume of the buzzer when a call  
signal is received  
The set time becomes valid.  
To resume the previous setting, press [Cancel]  
instead of [Set].  
Touch: Sound volume of the buzzer when a  
button displayed on the menu display is operated  
Switch: Sound volume of the buzzer when a  
button on the panel is operated  
The master volume can be adjusted with the  
rightmost control knob (Master).  
When the clock setting is completed  
Press [Exit] to leave the menu.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To turn on/off the buzzers independently  
Press the corresponding button. When it is lit, the  
buzzer is on.  
[Call Buzzer]: For the buzzer sound when a call signal  
is received  
lamps, including the master black indicator and  
f-number indicator  
The master brightness can be adjusted with the  
rightmost control knob (Master).  
[Touch Click]: For the buzzer sound when a button  
displayed on the menu display is operated  
[SW Click]: For the buzzer sound when a button on  
the panel is operated  
When the adjustment is completed  
Press [Exit] to leave the menu.  
Changing the Functions of the  
Rotary Encoders  
To turn off all the buzzers  
Press and light [All Off].  
You can change the functions of BLACK/FLARE  
control knobs.  
Proceed as follows:  
When the adjustment is completed  
Press [Exit] to leave the menu.  
1 Press [RE Setting] on the RCP Config menu to  
Adjusting the Brightness of the  
LEDs  
obtain the Rotary Encoder Setting display.  
RCP Config Menu  
Exit  
RE Setting  
You can adjust the brightness of the LEDs of the panel  
buttons and camera number/tally indication window.  
To adjust the brightness, proceed as follows.  
Rotary Encoder  
Setting  
1 Press [RCP Adjusting] on the RCP Config menu to  
display the RCP adjustment menu.  
BLACK / FLARE  
Black  
Flare  
2 Press and light [LED Bright].  
The lower half of the display becomes the LED  
Brightness adjustment display.  
2 When changing the function of the BLACK/  
FLARE control knobs, press [Black] or [Flare] as  
desired.  
Clear  
Exit  
Buzzer  
Volume  
LED  
When the adjustment is completed  
Press [Exit] to leave the menu.  
Bright  
LED  
Brightness  
Switch  
Tally  
Other  
Master  
50  
50  
50  
50  
3 Adjust the brightness with the corresponding  
control knobs (50 is the standard value with all  
items).  
Switch: Brightness of the built-in LEDs of the  
control buttons  
Tally: Brightness of the built-in LEDs of the  
camera number/tally indication window  
Other: Brightness of the other LED indicators/  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings  
2 Set the menu to Advanced Setting mode.  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
Adjusting the Brightness/  
Contrast of the LCD  
You can adjust the brightness and contrast of the  
display of the menu control block.  
Proceed as follows:  
The [Status], [Menu Set], and [Code No.] buttons  
are displayed.  
3)Press [Status].  
1 Press [LCD] on the OTHERS menu to display the  
The Security Status menu appears.  
4)Press [Advance Mode].  
LCD setting display.  
Clear  
Exit  
3 Press [SW Setting] on the RCP Config menu to  
obtain the SW Setting display.  
LCD Brightness  
/Contrast  
RCP Config Menu  
Exit  
SW Setting  
Bright  
Cont  
SW Assign  
NoAssign  
Black/Flare  
BlackAUTO  
ATW  
5
5
TLCS  
DynaLatitude  
Sel  
2 Adjust Bright and Cont (5 is the standard value  
with both items).  
To adjust the brightness and contrast for  
camera pictures  
4 Turn the second left control knob (Sel) to highlight  
the function to be assigned.  
NoAssign (default): No assignment  
Black/Flare: Switching the function of the  
BLACK/FLARE knobs  
1 Press [LCD Moni.] on the OTHERS menu to  
display the LCD setting display.  
Black AUTO: ON/OFF of the auto black  
ATW: ON/OFF of the auto tracing white balance  
TLCS: ON/OFF of the total level control function  
DynaLatitude: ON/OFF of the DynaLatitude  
function  
2 Adjust Bright and Cont (5 is the standard value  
with both items).  
When the adjustment is completed  
Press [Exit] to leave the menu.  
Note  
Some functions may be unoperative, depending on the  
connected camera.  
Assigning a Function to the  
ASSIGN Button  
When the assignment is completed  
Press [Exit] to leave the menu.  
You can assign a function to the ASSIGN button.  
Note that the assignable functions depend on the  
connected camera.  
Proceed as follows:  
1 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If you enter an incorrect security code, the message  
“!!!Code No. NG!!!” is displayed.  
Specifying the Security Codes  
You can authorize specific persons to set the menu to  
Engineer mode, to operate this panel, and to adjust the  
iris and master black by specifying a security code.  
When you enter the correct security code, the  
Security Code setting display is resumed with  
highlighted [Enable] and additional [Code  
Change].  
Locking Engineer mode with a security  
code  
After this setting, the Security Code input display  
appears when you press [Engineer Mode] of the  
Security menu.  
1 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
Releasing the security code lock of  
Engineer mode  
2 Set the menu to Engineer mode.  
1 When a security code for Engineer mode has been  
set, operate in the same manner as step 1 through  
step 4 in “Locking Engineer mode with a security  
code.”  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
The [Status], [Menu Set], and [Code No.] buttons  
are displayed.  
The Security Code input display appears.  
2 Enter the security code and press [Enter].  
The security code lock is released.  
3 Press [Code No.].  
The Security Code setting display appears.  
4 Press [Enable].  
Locking panel operations, iris/master  
black adjustments menu with a security  
code (Panel Active Lock)  
The Security Code input display now appears and  
“Input New Code No.” is displayed.  
1 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
5 Enter a security code and press [Enter].  
Use [0] to [9] to enter the security code (up to 8  
digits).  
2 Set the menu to Engineer mode.  
Asterisks, each representing one digit of the  
entered security code, are displayed in the upper  
New Code No. box.  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
The [Status], [Menu Set], and [Code No.] buttons  
Press [Back Space] to cancel previous input one at  
are displayed.  
a time.  
3 Press [Status].  
When you press [Enter], the message “Input Again  
to Confirm” is displayed.  
The Security Status menu appears.  
6 Enter the security code again and press [Enter].  
4 Press B to display the second page and press  
[Enable].  
Asterisks, each representing one digit of the  
entered security code, are displayed in the lower  
New Code No. box.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Initial Settings  
The Security Code input display appears.  
(Pressing [Enable $ENG Code%] registers the same  
security code as Engineer mode for Panel Active  
Lock.)  
2 Press B to display the second page and press  
[Disable].  
The security code is disabled.  
5 Operate in the same manner as step 5 and step 6 in  
Changing a security code  
“Locking Engineer mode with a security code.”  
1 Press [Code Change] on the Security Code setting  
The Security Status menu is resumed with  
highlighted [Enable] and additional [Code  
Change].  
display.  
The Security Code input display appears and the  
message “Input Old Code No.” is displayed.  
After this setting, when you hold the PANEL ACTIVE  
button pressed for more than 2 seconds, the message  
“!!Panel Locked!!” is displayed and the panel is  
locked.  
When the panel is locked, the Security Code input  
display appears when you press the PANEL ACTIVE  
or IRIS/M. BLACK ACTIVE button.  
If the correct security code is not entered, the lock is  
not released.  
2 Enter the current security code and press [Enter].  
Asterisks, each representing one digit of the  
entered security code, are displayed in the Old  
Code No. box.  
When you press [Enter], the message “Input New  
Code No.” is displayed.  
Notes  
3 Enter a new security code and press [Enter].  
• If no security code has been set for Engineer mode,  
[Enable $ENG Code%] is not displayed.  
• When the panel is locked with a security code, the  
panel lock is not released even when power to this  
unit is shut off.  
The message “Input Again to Confirm” is  
displayed.  
4 Enter the new security code again and press  
The panel lock is released when you select Engineer  
mode.  
[Enter].  
• When the panel is locked with a security code, only  
Security from RCP Config can be selected in the  
OTHERS menu.  
The new security code becomes valid.  
Note  
• If you specify a security code only for Panel Active  
Lock without setting a security code for Engineer  
mode, Engineer mode is also locked with the security  
code for Panel Active Lock when the panel is locked.  
If no security code has been set, [Code Change] is not  
displayed.  
If you forget the specified security code(s)  
Disabling the security code for Panel  
Active Lock  
1 Shut down power to the unit, then reapply power  
while holding the MASTER and CLOSE buttons  
pressed.  
1 When Panel Active Lock has been enabled, operate  
in the same manner as step 1 through step 3 in  
“Locking panel operations, iris/master black  
adjustments menu with a security code (Panel  
Active Lock).”  
The confirmation display for canceling the  
securing code appears.  
2 Press [OK].  
The Security Code input display appears.  
The message “Code No. cleared” is displayed, and  
the security code settings are canceled.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
File Operations  
This unit can operate two types of files: scene files and  
setup files.  
The table below shows the setting items which can be  
registered as either of the files.  
Setting data of cameras can be registered as scene files  
or setup files and recalled as required.  
Setup file  
Scene file  
Setting item  
DXC-D30/D35  
series only  
DXC-D30/D35  
series  
DXC-D50  
series  
DXC-637  
series  
Selecting shooting picture or color bars  
Master black  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Iris  
Auto iris mode  
yes  
yes  
Master gain  
TLCS  
Upper limit value for AGC  
Initial F-stop value for AGC  
Initial F-stop value for AE  
Shutter/Clear scan  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Shutter speed  
Clear scan frequency  
Filter position  
Selecting white balance or black balance adjustment  
ATW ON/OFF  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
R/B white balance adjustment  
R/B black balance adjustment  
Flare correction ON/OFF  
R/G/B flare correction  
Detail correction ON/OFF  
Detail level  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Detail boost frequency  
Crispening level  
Level dependence value  
Detail H/V  
V-detail limit value  
Highlight detail  
After gamma detail  
Aperture correction ON/OFF  
Aperture correction value  
Knee aperture correction ON/OFF  
Knee aperture correction value  
Cross color suppress value  
R/G comb filter ON/OFF  
Knee correction mode  
Master knee point  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Master knee slope  
White clip circuit ON/OFF  
White clip value  
yes  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
File Operations  
Setup file  
Scene file  
Setting item  
DXC-D30/D35  
series only  
DXC-D30/D35  
series  
DXC-D50  
series  
DXC-637  
series  
Gamma correction on/off  
Master gamma  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
R/B gamma  
Master black gamma  
R/B black gamma  
Gamma initial gain  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Black stretch level  
Upper/lower limit value for black stretch  
Upper/lower limit value for black compress  
DynaLatitude effect  
Matrix adjustment ON/OFF  
Saturation/hue  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
yes  
Matrix adjustment mode  
Matrix parameter (R-G, R-B, G-R, G-B, B-R, B-G)  
Skin detail level  
yes  
yes  
yes  
yes  
yes  
yes  
Skin matrix saturation/hue  
Skin gate position/size  
Position/size of skin gate detect window  
EVS  
yes  
yes  
Low Key saturation  
Focus/zoom  
yes  
yes  
yes  
yes  
yes  
yes  
Pan/tilt  
ON/OFFselection of optional control 1 or 2  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If the scene file button corresponding to the  
memory cell in which you wish to store data is not  
displayed, press either the v or V button at the  
lower-right position. You can change the scene file  
buttons by 5, in the order of [1] to [5], [6] to [10],  
[11] to [15], and [16] to [20]. You can also change  
the buttons one by one. When the knob at the  
leftmost position (Page) is turned clockwise,  
larger-numbered buttons are displayed one by one.  
When the knob is turned counterclockwise,  
smaller-numbered buttons are displayed in turn.  
Operating Scene Files  
Scene files are stored in the memory of this unit (or of  
the camera when using the DXC-D50-series camera).  
Among the setting items listed in the table on pages 51  
and 52, the settings for those items that have “yes” in  
the scene-file column can be stored as a scene file. Up  
to 20 scene files can be registered and retrieved as  
required. To register or retrieve scene files, use the  
Scene File Operation menu.  
The selected file number is displayed above the  
filename input box.  
Registering a scene file  
Use the Scene File Operation menu for storing a scene  
file, in the following manner:  
Retrieving a scene file  
1 Make the adjustment for the setting items that have  
“yes” in the scene-file column in the table on pages  
51 and 52, until the values you wish to store are  
obtained.  
Use the Scene File operation menu for retrieving a  
scene file.  
1 Press the SCENE button in the menu operation  
block to display the Scene File Operation menu on  
the LCD.  
2 Press the SCENE button in the menu operation  
block to display the Scene File operation menu on  
the LCD.  
2 Press either the v or V button, or turn the knob at  
the leftmost position (Page) until the file button  
corresponding to the desired file is displayed.  
Scene Files  
Store  
3 Press the button corresponding to the scene file to  
1
2
3
4
5
be retrieved.  
Scene 1 : STUDIO1  
Scene 2 : DXC-D30  
Scene 3 : TEST 002  
Scene 4 :  
Scene :  
DXC_D  
2*  
The selected scene file is retrieved, and the settings  
of the camera are replaced with the data of the  
retrieved file.  
Scene 5 :  
Page  
Char  
Cur  
3 Press [Store].  
4 Enter a filename (up to eight characters) in the  
filename input box.  
Moving the cursor: Turn the rightmost knob  
(Cur) until the cursor comes to the position  
where you wish to enter a character.  
Selecting a character: Turn the second knob  
(Char) from the left until the character which  
you wish to enter appears.  
5 Press a scene file select button (1 to 20)  
corresponding to the memory cell in which you  
wish to store the setting data.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
File Operations  
Reading the scene files from a Memory  
Stick  
Transferring Scene Files between  
the Camera and a Memory Stick  
(with the DXC-D50 Series)  
Proceed as follows:  
1 Insert the Memory Stick (see page 59).  
When a DXC-D50-series camera is connected, the  
registered scene files can be stored as a data block and  
can be read when required.  
2 Operate in the same manner as when you stored  
the files until the Scene File Transfer display  
appears.  
Storing the scene files on a Memory Stick  
3 Press [MS -> CAM].  
Proceed as follows:  
A confirmation display appears.  
1 Insert the Memory Stick (see page 59).  
4 Press [Start].  
The scene files are transferred from the Memory Stick  
2 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
to the connected camera.  
When the transfer is finished  
The termination message “COMPLETED” appears.  
3 Set the menu to Advanced Setting mode.  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
The [Status], [Menu Set], and [Code No.]  
buttons are displayed.  
3)Press [Status].  
The Security Status menu appears.  
4)Press [Advance Mode].  
4 Return to the OTHERS menu, and press [File].  
5 Press [File Trans].  
The Scene File Transfer display appears.  
6 Press [CAM -> MS].  
A confirmation display appears.  
7 Press [Start].  
The registered scene files are transferred to the  
Memory Stick.  
When the transfer is finished  
The termination message “COMPLETED” appears.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5 Press [Store].  
Operating Setup Files (for DXC-  
D30/D35 Series only)  
The current settings of the camera are stored as a  
setup file with the name entered in Step 4, and that  
filename is displayed on the list.  
Among the setting items listed in the table on pages 51  
and 52, the settings for those items that have “yes” in  
the Setup-file column are stored as a setup file in the  
memory of the camera. In addition to five files  
Retrieving a setup file  
(PRESET 1 to PRESET 5) that have already been  
registered in the camera, three more files (USER 1 to  
USER 3) can be registered and retrieved as required.  
1 Call the Setup File operation display, then turn the  
knob at the leftmost position (Sel) to select the file  
you wish to retrieve from among PRESET 1 to  
PRESET 5 (preset files 1–5) and USER 1 to USER  
3 (user’s registration files 1–3) from the list.  
To register or retrieve setup files, use the Setup File  
operation display.  
2 Press [Recall].  
Registering a setup file  
The selected file is retrieved, and the settings of the  
camera are replaced with the data of the retrieved  
file.  
1 Press the OTHERS button in the menu operation  
block to display the OTHERS menu on the LCD,  
then press [File] to call the File menu.  
2 Press [Setup File].  
The Setup File operation display appears.  
Setup Files  
Exit  
PRESET 1 : STD  
PRESET 2 : HISAT  
PRESET 3 : FL  
Recall  
PRESET 4 : FILMLIKE  
PRESET 5 : SVHS/VHS  
USER 1 : USER 1  
USER 2 : USER 2  
USER 3 : USER 3  
Sel  
DXC_D  
Store  
Cur  
Char  
3 Turn the knob at the leftmost position (Sel) to  
select a file to which you wish to register data  
among USER 1 to USER 3 (user’s registration files  
1-3) from the list.  
4 Enter a filename (up to eight characters) in the  
filename input box.  
Moving the cursor: Turn the rightmost knob  
(Cur) until the cursor comes to the position  
where you wish to enter a character.  
Selecting a character: Turn the second knob  
(Char) from the right until the character which  
you wish to enter appears.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Skin Detail Correction/Skin Matrix Adjustment (for  
DXC-D30/D35/D50 Series Only)  
The skin detail and skin matrix functions can adjust  
detail level and matrix (saturation and hue) of a  
selected skin gate area (area designated by color  
range).  
Once a skin gate area has been selected, it can be used  
as a target for both skin detail correction and skin  
matrix adjustment, and activation of each function can  
be performed independently.  
If you power off the unit or store the current  
settings as a scene file while setting the detail level  
to the minimum value, the skin detail function will  
be set to off when you power on the unit or recall  
the scene file next time.  
To store the skin detail settings  
Set the SKIN DETAIL button on before powering off  
the unit or storing the settings as a scene file. If the  
button is off, the skin detail settings will not be stored.  
Selecting the skin gate area  
Normally, use the SKIN DTL SETUP button of the  
AUTO SETUP block to designate the skin gate  
position (target color) automatically.  
Performing skin matrix adjustment  
Follow the procedure described below to adjust the  
matrix (saturation and hue) of the skin gate area.  
1 Press and light the SKIN DTL SETUP button  
1 Select [Skin Matrix] in Paint menu 3.  
(ON).  
2 Set [Skin Matrix] to ON.  
The window which shows the skin gate and target  
area appears in the camera’s viewfinder.  
You can also see the skin gate with a picture  
output from the CCU’s PIX connector.  
3 Set the saturation and hue using the leftmost  
control knob (Hue) or the second control knob  
(Sat) from the left.  
2 Press the START button.  
Selecting 00 causes the same situation as the skin  
matrix function is set off.  
The skin gate is designated automatically.  
If you power off the unit or store the current  
settings as a scene file while selecting 00, the skin  
matrix function will be set to off when you power  
on the unit or recall the scene file next time.  
When using a DXC-D30/D35-series camera, you can  
manually adjust the position of the designated skin  
gate in Paint menu.  
Note  
When using the DXC-D30 series, this adjustment is  
valid when the matrix adjustment function is active.  
Performing skin detail correction  
By skin detail correction, you can lower the detail level  
of the skin gate area to the detail level outside of the  
area.  
To store the skin matrix settings  
Activate both the matrix adjustment and skin matrix  
adjustment functions before powering off the unit or  
storing the settings as a scene file. Otherwise, the skin  
matrix settings will not be stored.  
1 Press and light the SKIN DETAIL button (ON).  
2 Select [Skin Detail] in Paint menu 2.  
3 Set the detail correction level using the leftmost  
control knob (Level).  
Setting the level to the max. value (+99): The  
detail level of the area is set to the lowest level.  
Setting the level to the min. value (0): The detail  
level of the area is set to the same level with the  
outside of the area. (The same situation as the  
skin detail function is set to off.)  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-Camera Control  
Connections and Preparatons  
Adjusting the Iris/Master Black  
of Multiple Cameras at One Time  
In a multi-camera system, connecting all the CCU-  
TX7 units via the RS232C connectors allows one RCP  
unit selected from all the RCP units in the system to  
control the multiple cameras.  
If the selected unit is set as the master unit and the rest  
are set as slave units, the setting data of the camera  
connected to the master unit can be transferred to other  
cameras.  
For iris and master black adjustments, you can use any  
one of the RCP units (whether it is the master unit or a  
slave unit) specified with the IRIS/M.BLACK LINK  
button.  
1 Select the cameras for which you will adjust the  
iris or master black by pressing the IRIS/  
M.BLACK LINK buttons on the connected RCP  
units. (The buttons light when pressed.)  
To make connections among the CCU-TX7  
units  
Connect RS-232C cross (or reverse) cables with D-sub  
25-pin plugs (not supplied) to the RS232C connectors  
on each CCU to make a daisy chain of the CCUs.  
2 Adjust the iris or master black on one RCP unit  
whose IRIS/M.BLACK LINK button lights.  
For more information about cables which can be used,  
consult your Sony dealer.  
On the cameras connected to the RCP units whose  
IRIS/M.BLACK LINK buttons light, the iris or  
master black adjustments are performed by the  
same amount and at the same time (on relative  
mode).  
Notes  
• It is impossible to assure that all the cameras can be  
set up to the same conditions under the multi-camera  
control. Setting purposes and the current condition of  
each camera may cause variation of the setting  
condition.  
Note  
The IRIS/M.BLACK LINK function is released while  
transferring the scene files.  
• In a system which contains more than two types of  
cameras, the setting items, adjustment range and  
adjustment accuracy available at the multi-camera  
operation are determined depending on the efficiency  
of the camera connected to the master unit.  
• There are two setting modes: Absolute mode and  
Relative mode.  
Data Transfer Among Multiple  
Cameras  
The settings made on the master unit can be transferred  
to the cameras connected to the slave units, if they can  
be registered as a scene file.  
• Settings performed on a slave unit are valid only to  
the connected camera.  
Perform as follows:  
Setting a unit to the master unit or a slave  
unit  
1 Select [File] from the OTHERS menu, and press  
[Copy to Slaves].  
Note  
Perform the following procedure after making sure all  
the cameras in the system are powered on. Note that  
executing the procedure when there is any cameras  
powered off may result in failure.  
2 Press [Start].  
Data transfer begins.  
Meanwhile, on all the linked RCP units (including  
units selected as neither the master unit nor slave  
units), the message “IN PROGRESS” is displayed on  
the LCD and all buttons and knobs are locked.  
1 Select one RCP unit for the master unit, and press  
the MASTER button. (The button lights when  
pressed.)  
When the data transfer completes, the message  
“COMPLETED” appears on the LCD. The LCD soon  
returns to the original status.  
2 Select one RCP unit (or more) for a slave unit, and  
press the SLAVE button. (The button lights when  
pressed.)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multi-Camera Control  
Notes  
• The command link adjustment of R/G/B flare  
correction is available only with the DXC-D30/D35/  
D50 series.  
• While scene file transfer is in progress on a slave  
unit, do not tranfer data from the master unit to the  
slave unit. Scene file transfer will fail.  
• The master/slave setting is released while transferring  
the scene files.  
Activating command link adjustments/  
settings  
1 Press the OTHERS button in the Menu operation  
block so that the OTHERS menu is displayed on  
the LCD, then press [RCP Config] to call the RCP  
Config menu.  
Operating Multiple Cameras from  
One RCP Unit —Command Link  
Command link allows one RCP selected as the master  
unit to control the adjustments or settings of the  
cameras connected to the slave units.  
To perform command link operation, activate the  
command link on the Command Link operation  
display on the master unit.  
2 Set the menu to Advanced Setting mode.  
1)Press [Security] on the RCP Config menu.  
2)Press and highlight [Engineer Mode].  
The [Status], [Menu Set], and [Code No.]  
buttons are displayed.  
Note  
3)Press [Status].  
The Command Link operation display can be  
displayed from the RCP Config menu only in  
Advanced Setting mode.  
The Security Status menu appears.  
4)Press [Advance Mode].  
3 Return to the RCP Config menu, and press  
Command Link items  
[Comm Link].  
• Gain setting (Absolute mode)  
• Shutter settings (Absolute mode)  
- Shutter on/off  
The Command Link Items are displayed.  
- Clear scan mode on/off  
- EVS function on/off  
RCP Config Menu  
Exit  
Command Link Item  
- Shutter speed  
- Clear scan frequency  
R/B  
White  
Gain  
• R/B manual white balance adjustment (Relative  
mode)  
R/B  
Shutter  
Black  
• R/B manual black balance adjustment(Relative  
mode)  
R/G/B  
Flare  
• R/G/B manual flare correction (Relative mode)  
Notes  
• Do not perform command link operation in a system  
containing multiple cameras of different types. If the  
camera connected to a slave unit is different in type  
from the camera connected to the master unit,  
changing the gain value on the master unit will set the  
gain value of the camera connected to the slave unit  
to 0 dB or the LOW position. The CLS frequency  
does not exceed the limit for the camera.  
4 Press and highlight the button for the item for  
which you wish to activate the command link.  
5 Press [Exit] to leave the menu.  
When you adjust the item for which you wish to  
activate the command link on the master unit, the  
adjustment becomes valid on the cameras  
connected to the slave units.  
• When adjusting the white balance, black balance and  
flare with the command link, select Manual  
Adjustment mode for white balance, black balance  
and flare also on slave units.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory Sticks  
Using a Memory Stick  
Notes on Memory Stick  
When a Memory Stick is inserted in the panel, the file  
data can be stored on the Memory Stick, which  
enables you to share data among RCPs.  
On Memory Stick  
Memory Stick is a new compact, portable and  
versatile IC recording medium with a data capacity  
that exceeds that of a floppy disk. Memory Stick is  
specially designed for exchanging and sharing digital  
data among Memory Stick compatible products.  
Because it is removable, Memory Stick can also be  
used for external data storage.  
Inserting a Memory Stick  
Insert a Memory Stick with the label side to the left  
into the Memory Stick slot until it clicks and the  
access lamp lights in red.  
Types of Memory Stick  
Label side  
There are two types of Memory Stick: “MagicGate  
Memory Stick” that are equipped with the MagicGate  
copyright protection technology and general “Memory  
Stick.” You can use either type of Memory Stick with  
your camera. However, because your camera does not  
support the MagicGate standards, data recorded with  
your camera is not subject to MagicGate copyright  
protection.  
Access lamp  
Memory Stick  
EXT  
On MagicGate  
MagicGate is copyright-protection technology that  
uses encryption technology.  
Note  
Structure of Memory Stick  
Never insert/remove a Memory Stick while the access  
lamp is lit in red.  
Terminal  
To remove a Memory Stick  
If you push the inserted Memory Stick, the Memory  
Stick will pop out a little. Then pull the Memory  
Stick out.  
Write-Protect tab  
Access lamp  
The access lamp shows the status of the Memory  
Stick.  
Off: No Memory Stick is inserted.  
Lit in green: There is a Memory Stick in the slot. In  
this condition, you can safely eject the Memory  
Stick.  
Labeling position  
You cannot record or erase data when the write-protect  
tab on the Memory Stick is set to LOCK.  
Lit in red: Data are being read/written. If you eject  
the Memory Stick in this condition, the data are  
not guaranteed. All the data may be lost.  
We recommend backing up important data.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memory Sticks  
Handling of Memory Stick  
• Image data may be damaged in the following cases:  
– If you remove the Memory Stick, or turn the power  
off when the access lamp is lit in red  
– If you use a Memory Stick near static electricity or  
a magnetic field  
We recommend backing up important data.  
• Prevent metallic objects or your finger from coming  
into contact with the terminal of the connecting  
section.  
• Do not attach any material other than the supplied  
label to the label space.  
• Attach the label at the prescribed labeling position.  
Make sure the label is attached at the labeling  
position properly.  
• Do not bend, drop, or apply strong shock to a  
Memory Stick.  
• Do not disassemble or modify a Memory Stick.  
• Do not let the Memory Stick get wet.  
• Do not use or keep a Memory Stick in locations that  
are:  
– Extremely hot such as in a car parked in the sun  
– Under direct sunlight  
– Very humid or subject to corrosive gases  
• When you carry or store a Memory Stick, keep it in  
its case.  
Memory Sticks of the sizes that can be used with the  
RCP-D50/D51 may not be used with some cameras.  
To exchange the setting data with a camera via a  
Memory Stick, be sure to use Memory Sticks of a  
size that can be used with both the RCP-D50/D51 and  
the camera.  
Memory Stick and  
Corporation.  
MagicGate Memory Stick and  
are the trademarks of Sony  
are the  
trademarks of Sony Corporation.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
General  
Power requirements 10.5 to 17 V DC  
Power consumption 4.5 W  
Cable length  
50 m (164 feet) max.  
(when the CCA-7 cable is used)  
Operating temperature  
5°C to 40°C (41°F to 104°F)  
Dimensions (w/h/d) RCP-D50:  
102 × 354 × 126.5 mm  
(4 1/8 × 14 × 5 inches)  
RCP-D51:  
102 × 354 × 86.5 mm  
(4 1/8 × 14 × 31/2 inches)  
RCP-D50: 1.5 kg (3 lb 5 oz)  
RCP-D51: 1.3 kg (2 lb 14 oz)  
Mass  
Inputs/outputs  
CCU/CAMERA  
MONITOR  
EXT I/O  
10-pin multiconnector (1)  
BNC type (1)  
9-pin D-sub connector (1)  
Supplied accessories  
Remote cable CCA-7-5 (5 m) (1)  
Operating instructions (1 set)  
Optional accessories  
Remote cable CCA-7-5 (5 m)  
Remote cable CCA-7-25 (25 m)  
Memory Stick  
Design and specifications are subject to change  
without notice.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Shindaiwa Trimmer 81646 User Manual
SMSC Switch USB2514i User Manual
Snell Acoustics Speaker 650r User Manual
Sony Camcorder 4 171 501 121 User Manual
Sony Headphones MDR D777LP User Manual
Sony Portable DVD Player D V55 User Manual
Sony Radio Antenna ICF CD2000 User Manual
Sony Stereo System 3 300 703 112 User Manual
Spalding Fitness Equipment M8660411 User Manual
SVAT Electronics Security Camera CV1010 User Manual