2-189-525-12 (1)
Making Video Connections
Best Video
Your TV includes
4 Programming the
Remote Control
Connector type
Performance
several types of video
KDE-37XS955
KDE-42XS955
KDE-50XS955
HDMI
(High-Definition
Multimedia Interface)
inputs. Use the inputs
that are available on
your components that
provide the best
video performance, as
described in right.
The remote control is preset to operate Sony brand video equipment.
Component video
S VIDEO
Qu ick Se t u p Gu id e
Sony Equipment
DVD/VCR
Programmable Code Number
601 (Sony Dream System)
801 (Sony Satellite Receiver)
Composite video
RF/Coaxial
SAT/Cable
If you have video equipment other than Sony brand that you want to
control with the TV’s remote control, use the following procedures to
program the remote control.
Please follow the steps to setup your TV:
Additional Connections
Note
For best audio performance, connect your digital audio components
using either digital optical or digital coaxial audio connections.
Depending on which components are in your system, you may need
to complete additional connections. For example, if you have a
satellite receiver, you’ll need to connect the satellite antenna. If you
have an AV receiver, you’ll need to connect speakers.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
zzzzzzzz
zzzzzzzz
zzzzzzzz
1 2 3 4
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
1 Press the DVD/ VCR (FUNCTION) and RESET
buttons simultaneously, or press the SAT/ CABLE
(FUNCTION) and RESET buttons simultaneously.
DVD/ VCR and SAT/ CABLE buttons flash.
5
Note
Checking the
Supplied Accessories
Connecting Your TV
(See reverse side)
Running Initial
Setup
Programming
the Remote Control
DVD/
SAT/ POWER
CABLE
The connection diagrams shown in the reverse side are recommendations only; other
possible solutions may exist. Connections that include an AV receiver can often be very
complex, so check your AV receiver’s instruction manual for additional details.
MUTING VCR
TV/
MODE
VIDEO
PICTURE WIDE DISPLAY
2 Press the function button you want to program.
To program a cable box or a satellite receiver
Press SAT/ CABLE (FUNCTION).
3
4
Activating CableCARD™ Service
Before you can use
R-AUDIO -L
VIDEO
S VIDEO
(MONO)
GUIDE
FAVORITES
MENU
4
5
R-AUDIO -L
Y
To program video equipment
Press DVD/ VCR (FUNCTION).
HD/DVD
CableCARD™ service,
you need to insert the
CableCARD™ (supplied
by your cable provider)
and activate the service,
as described in right.
(
1080i/720p/48
TOP MENU
If your product is not working properly
DO NOT RETURN TO THE STORE.
For service and technical assistance
Call our Customer Information Service Center (Toll Free):
1-800-222-SONY (7669) for US residents.
CableCARD
R-AUDIO -L
Y
HD/DVD IN
P
B
PR
(
)
1080i/720p/480p/480i
3 Enter the three-digit manufacturer’s code number
using the 0-9 buttons.
4 Press ENT (enter).
1, 2
POWER
SAVING
SOUND
MODE
1-877-899-SONY (7669) for Canadian residents.
/TV/SAT ANT
GUIDE
5 To check if the code number works, aim the TV’s
remote control at the equipment and press DVD/
VCR and/ or SAT/ CABLE (POWER) that corre-
sponds with that equipment. If it responds, the
programming is completed. If not, try using the
other codes listed for that manufacturer.
KDE-37/42XS955
KDE-50XS955
Note
RESET
MTS/SAP JUMP
Inserting the CableCARD™ incorrectly may result in permanent damage to the card and the
TV.
Sony Corporation © 2004 Printed in Japan
1
Tips
• If more than one code number is listed, try entering them one by
one until you come to the correct code for your equipment.
• If you enter a new code number, the code number you
previously entered at that setting is erased.
1 Checking the
2 Connecting Your TV 3 Running Initial Setup
Supplied Accessories
Remote control (RM-Y1004) (1)
and size AA batteries (2)
Manufacturer Code
Manufacturer Code
Manufacturer’s Codes
DVD Players
Aiwa*
338, 344
314, 337
319, 317
309, 308
332
Scott
312, 313, 321, 335,
323, 324, 325, 326
Audio Dynamic
Broksonic
Canon
Sharp
327, 328
• Review the following chart to determine which diagram to use to
connect the components in your system:
Manufacturer Code
1 Press POWER to turn on the TV.
Signature 2000 (M.Ward) 338, 327
Sony
751
755
758
756
757
761
753
757
752
755
758
754
760
SV 2000
Sylvania
Symphonic
Tashiro
Tatung
Teac
338
The Initial Setup screen appears.
Citizen
General Electric
Hitachi
308, 309, 338, 310
338
Craig
302, 332
304, 338, 309
341, 312, 309
314, 336, 337
304
For these components
See reverse
side
Curtis Mathes
Daewoo
DBX
2 Press V or v to select the on-screen display language. Then press
.
JVC
332
Magnavox
Mitsubishi
Panasonic
Philips
314, 336, 337
314, 336, 338, 337
309, 308
The message “Start auto program now?” appears.
Dimensia
Emerson
AC pow er cord (1)
Technics
Toshiba
Wards
319, 320, 316, 317,
318, 341
3 Press V or v to select “Yes”, then press
Auto Program automatically creates a list of receivable channels.
When finished, the lowest numbered channel is displayed.
.
312, 311
or
Pioneer
A
B
Fisher
330, 335
327, 328, 335, 331,
332
RCA/PROSCAN
Samsung
Toshiba
Funai
338
Yamaha
Zenith
314, 330, 336, 337
331
General Electric
Go Video
Goldstar
329, 304, 309
322, 339, 340
332
Zenith
or
or
• AC plug holder (1)
• Cable band (1)
• Cable band screw (1)
• AC cord clamp (1)
• Cleaning cloth (1)
Cable Boxes
Hitachi
306, 304, 305, 338
309, 308
DVD Changers
To run Auto Program again at a later time
Instant Replay
JC Penney
Manufacturer Code
• Operating Instructions (1)
• Quick Setup Guide (1)
• Warranty Card (1)
Manufacturer Code
309, 305, 304, 330,
314, 336, 337
Sony
230
s Use the Auto Program feature in the operating instructions.
Sony
765
Hamlin/Regal
222, 223, 224, 225,
226
JVC
314, 336, 337, 345,
346, 347
Panasonic
766
Jerrold, G.I.
201, 202, 203, 204,
205, 206, 207, 208,
218, 222
Kenwood
LG
314, 336, 332, 337
332
To add individual digital channels
C
D
E
DVD/VCR Combo Units
Manufacturer Code
Oak
227, 228, 229
219, 220, 221
214, 215
s Use the Digital Channels feature in the operating instructions.
LXI (SEARS)
332, 305, 330, 335,
338
Sony
767
768
773
774
775
776
777
Panasonic
Pioneer
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
Zenith
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the e and E on
the batteries to the diagram inside the remote control’s battery
compartment.
Toshiba
Samsung
JVC
Scientific Atlanta
Tocom
209, 210, 211
216, 217
Note
Memorex
Minolta
309, 335
Zenith
212, 213
Auto Program may take up to 50 minutes or more to complete.
A progress bar is displayed while the channel list is being created.
305, 304
Broksonic
Panasonic
Mitsubishi/MGA
Multitech
NEC
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Satellite Receivers
Manufacturer Code
or
HDD/DVD Combo Units
Manufacturer Code
Sony
801
Olympic
Optimus
Orion
Dish Network
Echostar
810
327
Sony
770, 771, 772
810
317
General Electric
Hitachi
802
F
Panasonic
Pentax
308, 309, 306, 307
305, 304
5.1ch DVD AV System
Manufacturer Code
805
Hughes
804
Philco
308, 309
Mitsubishi
Panasonic
RCA/PROSCAN
Toshiba
809
• See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
Sony (DAV)
601, 602, 603, 604
Philips
308, 309, 310
308
803
Pioneer
802, 808
806, 807
Quasar
308, 309, 306
AV Receivers
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
Manufacturer Code
Sony
764
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
Realistic
309, 330, 328, 335,
324, 338
• Turn off and unplug all components before making connections.
• If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
VCRs
Sansui
Samsung
Sanyo
314
Manufacturer Code
322, 313, 321
330, 335
Sony
301, 302, 303
Admiral (M. Ward)
327
Download from Www.Somanuals.com. All Manuals Search And Download.
|