3-856-873-11 (1)
Operating Instructions
GB
KV-14V4U
Trinitron Colour Video TV
PAL NTSC 4.43
© 1996 by Sony Corporation
Printed in Spain
SONY KV-14V4U (GB)_3-856-873-11 (1)
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
To prevent fire or shock hazard, do not expose the unit to
rain or moisture.
Dangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
For safe installation:
• Do not block the ventilation openings.
• Do not install the unit in hot, humid, or excessively dusty
places.
• Do not install the unit where it may be exposed to
mechanical vibrations.
• Position the unit so that there is a clear space of 10 cm
from a wall, allowing you to press the U (MAIN
POWER) switch to turn it on and off completely.
Caution
Television programmes, films, video tapes and other
materials may be copyrighted.
Unauthorized recording of such materials may be
contrary to the provisions of the copyright laws.
Colour System of Your
Set
10cm
This video TV is designed to receive TV programmes
based on PAL (I) colour system and to record and play on
PAL colour system. Also, the video TV can play tapes on
NTSC colour system.
Precautions
Safety Information
For general safety:
For your protection, refer all servicing to qualified
personnel.
• Do not expose the unit to rain or moisture.
• Do not open the rear cover.
rIMPORTANT
If the plug supplied is not suitable for the socket outlets
in your home, it should be cut off and an appropriate
plug fitted in accordance with the following instructions:
The wires in this mains lead are coloured in accordance
with the following code:
For safe operations:
• Do not operate the unit on anything but 220-240 V AC.
• Do not operate the unit if any liquid or solid object falls
in it—have it checked immediately.
• Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by the
cord.
Blue
Neutral
Live
Brown
As the colours of the wires in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug, proceed
as follows:
NOTICE FOR CUSTOMERS IN THE UNITED
KINGDOM
A moulded plug complying with BS1363 is fitted to this
equipment for your safety and convenience.
Should the fuse in the plug supplied need to be replaced,
a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.e.
marked with 2 or @ must be used.
When an alternative type of plug is used it should be
fitted with a 5 AMP FUSE, otherwise the circuit should
be protected by a 5 AMP FUSE at the distribution board.
If the plug supplied with this equipment has a detachable
fuse cover, be sure to attach the fuse cover after you
change the fuse. Never use the plug without the fuse
cover. If you should lose the fuse cover, please contact
your nearest Sony service station.
The wire which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the letter
L or coloured red. Do not connect either wire to the earth
terminal in the plug which is marked by the letter E or by
the safety earth symbol Y or coloured green or green and
yellow.
rWARNING
To prevent shock hazard, do not insert the plug cut off
from the mains lead into a socket outlet. This plug
cannot be used and should be destroyed.
rTo prevent fire or shock hazard, do not expose the unit to
rain or moisture.
rDangerously high voltages are present inside the set. Do
not open the cabinet. Refer servicing to qualified
personnel only.
How to replace the fuse
Open the fuse compartment with a blade screwdriver, and
replace the fuse.
FUSE
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Getting Started
Additional Operations
Step 1—Preparation ................................................... 4
Checking the supplied accessories ....................... 4
Inserting batteries into the Remote
Switching off automatically—Sleep timer ............ 31
Switching on at your desired time—On timer ..... 32
Enhancing video picture quality ............................ 33
Adjusting the tracking .......................................... 33
Adjusting with the optimum picture control
(OPC) ................................................................... 34
About the auto head cleaner ............................... 34
Connecting optional equipment ............................. 35
Watching the picture input from optional
Commander .......................................................... 4
Step 2—Connecting the aerial................................... 5
Connecting an indoor aerial .................................. 5
Connecting an outdoor aerial................................ 5
Step 3—Tuning in to TV stations ............................. 6
Selecting the language on the menu..................... 6
Presetting channels automatically ........................ 7
Presetting channels manually ............................... 8
Skipping programme positions ............................ 9
Captioning a TV station name ............................ 10
Manual fine-tuning ............................................... 11
Step 4 — Setting up VCR Plus+* ............................ 12
Setting the guide channels ................................... 12
Step 5—Setting the clock ......................................... 14
GB
equipment ........................................................... 35
Editing with another VCR ................................... 35
Additional Information
Troubleshooting ........................................................ 36
Taking care of your video TV ................................. 38
Video head cleaning ............................................. 38
Worn video heads ................................................. 38
Check the video heads after 1,000 hours
of use .................................................................... 38
Specifications ............................................................. 39
Television channel number guide .......................... 40
Index to parts and controls...................................... 41
Video TV set—front .............................................. 41
Remote Commander............................................. 42
Basic Operations
Watching the TV ....................................................... 15
Switching the video TV on and off .................... 15
Selecting TV programmes.................................... 15
Adjusting the volume ........................................... 15
Muting the sound.................................................. 16
Displaying the on-screen information ............... 16
Adjusting the picture ............................................ 16
Watching line input .............................................. 18
Listening with headphones ................................. 18
Playing a Tape ........................................................... 19
Inserting a video cassette ..................................... 19
Ejecting a video cassette ....................................... 19
Protecting your cassette against accidental
* VCR Plus+ and PlusCode are trademarks of Gemstar
Development Corporation. VCR Plus+ system is
manufactured under license from Gemstar Development
Corporation.
erasure ................................................................ 19
Playing a tape ........................................................ 20
Playing a tape repeatedly (Auto Repeat)........... 21
Displaying the on-screen indications ................. 21
Resetting the tape counter ................................... 21
Recording TV programmes ..................................... 22
Recording TV programmes ................................. 22
Recording with the TV off ................................... 22
Recording TV programmes using the timer ......... 23
Setting the timer .................................................... 23
Using the video TV before timer recording
starts ..................................................................... 25
Checking the timer settings ................................. 26
Changing or canceling the timer settings .......... 26
Recording using the quick-timer ........................ 27
Timer recording with PDC signals ..................... 28
Recording TV programmes using VCR Plus+ ..... 29
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1 — Preparation
Checking the Supplied Accessories
When you have taken everything out of the carton, check that you have
these items:
• Remote Commander
• Two R6 (size AA) batteries
• Loop aerial
Inserting Batteries into the Remote
Commander
Close the cover.
Check the polarities and
position two R6 batteries
correctly.
Turn the Commander over,
and remove the cover.
Getting Started
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 — Connecting the Aerial
Connecting an Indoor Aerial
If your local UHF signal is strong, an indoor aerial can be used to obtain a
clear picture. Connect the supplied loop aerial as follows.
1 Insert the aerial until it clicks.
2 Connect to the
(aerial) socket.
After you’ve turned on the video TV, adjust the aerial for best reception.
GB
Aerial
connector
(Supplied)
Do not use this aerial with any other TV product.
Connecting an Outdoor Aerial
For better TV reception and recording with clear video picture, connect an
outdoor aerial to your video TV.
To connect a UHF aerial—75-ohm coaxial
cable (round)
Attach an IEC aerial connector to 75-ohm coaxial cable.
Plug the connector into the
(aerial) socket of the video TV.
UHF aerial
On a wall
Rear
or
After connecting the aerial, connect the mains lead to a wall outlet.
Getting Started
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 — Tuning in to TV Stations
You should preset the channels (up to 60 channels) by choosing either the
automatic or manual method.
The automatic method is easier if you want to preset all receivable
channels at once. Use the manual method if you want to allocate
programme numbers to the channels one by one.
ON TIMER
SLEEP
MENU
OK
Before you begin
• Depress the U switch on the video TV to switch it on.
If the u lamp on the video TV is lit in red, press ;, PROGR +/– or a
number button on the Remote Commander.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
DAILY
7
WEEKLY
Selecting the Language on the
Menu
÷
PROGR
You can select one of several languages for the menu and on-screen
information.
The initial setting is English.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
1 Press MENU.
QUICK
TIMER
COUNTER
RESET
PAUSE
The main menu appears.
MENU
PLAY
VISUAL MODE
REW
FF
ON TIMER SET
CLOCK SET
TRACKING CONTROL
LANGUAGE
STOP
PROGRAMME PRESET
DEMONSTRATION
OK
and p r es s
Se l ec t
2 Move the cursor (z) to “LANGUAGE” with + ◊ or – √ and press OK.
The LANGUAGE menu appears.
LANGUAGE
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
PORTUGUÊS
OK
and p r es s
Se l ec t
Note on the DEMONSTRATION
function
3 Select the language you want with + ◊ or – √ and press OK.
The selected language is coloured green, and the menu appears in the
selected language.
If you choose “DEMONSTRATION”
on the main menu and press OK,
you can see a sequential
demonstration on the menu
functions on the screen. Press any
button (e.g. MENU) to stop this
function.
4 Press MENU to go back to the original screen.
Getting Started
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Channels Automatically
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and
press OK.
ON TIMER
SLEEP
MENU
OK
The PROGRAMME PRESET menu appears.
GB
PROGRAMME PRESET
AUTO PROGRAMME
MANUAL PROGRAMME
SET UP GUIDE CH
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
OK
and p r es s
Se l ec t
DAILY
7
3 Move the cursor (z) to “AUTO PROGRAMME” with + ◊ or – √ and press
WEEKLY
÷
OK.
PROGR
The AUTO PROGRAMME menu appears.
AUTO PROGRAMME
SYSTEM
I
PROG BAND
–– –––
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
OK
and p r es s
Se l ec t
QUICK
TIMER
COUNTER
RESET
PAUSE
4 Press OK.
PLAY
The programme number you previously watched appears in red in the
“PROG” position.
REW
FF
STOP
Using + ◊ or – √, select the programme number from which you want to
start presetting.
5 Press OK.
The tuning bar appears, and the video TV starts scanning and presetting a
receivable channel from programme number selected in step 4.
The band scanning by tuning bar is displayed in the “BAND” position.
AUTO PROGRAMME
SYSTEM
I
PROG BAND
01 UHF
To stop automatic channel
presetting
OK
and p r es s
Se l ec t
Press ? on the Remote
Commander.
The preset programme and channel numbers are displayed on the screen
in sequence. When presetting is finished, the original screen appears. All
available channels are now stored on successive number buttons.
Getting Started
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Channels Manually
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and
press OK.
ON TIMER
SLEEP
MENU
OK
The PROGRAMME PRESET menu appears.
PROGRAMME PRESET
AUTO PROGRAMME
MANUAL PROGRAMME
SET UP GUIDE CH
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
Se l ec t
and p r es s OK
DAILY
7
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
WEEKLY
÷
PROGR
The MANUAL PROGRAMME menu appears.
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
0
1
2
I
I
I
UHF
UHF
UHF
––––– ON
––––– ON
––––– ON
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
OK
and p r es s
Se l ec t
QUICK
TIMER
COUNTER
RESET
PAUSE
4 Using + ◊ or – √, move the cursor (z) to the programme position (number
button) to which you want to preset the channel, and press OK repeatedly
until the tuning bar turns red.
PLAY
REW
FF
STOP
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
UHF ––––– ON
0
1
2
I
I
I
UHF ––––– ON
UHF ––––– ON
OK
Se l ec t
and p r es s
5 Press + ◊ (up) or – √ (down).
The tuning bar turns green and starts scanning receivable channels. When
the receivable channel is found, the tuning bar stops. If you want to preset
this channel, press OK. If not, press + ◊ or – √ again to search for another
channel.
For programme positions
beyond 2
6 Repeat steps 4 and 5 to preset other channels.
The display scrolls by pressing – √
repeatedly.
7 After you finish presetting, press MENU to go back to the original screen.
If you have made a mistake
Press ? to go back to the previous
position.
Getting Started
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Skipping Programme Positions
You can skip unused programme positions when selecting programme
with PROGR +/– buttons. However, the skipped programmes may still
be called up when you select them with the number buttons.
ON TIMER
SLEEP
MENU
OK
1 Press MENU to display the main menu.
GB
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and
press OK.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
The PROGRAMME PRESET menu appears.
DAILY
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
7
WEEKLY
The MANUAL PROGRAMME menu appears.
÷
PROGR
4 Using + ◊ or – √, move the cursor (z) to the programme position which
you want to skip and press OK.
The “SYS” position turns red.
MANUAL PROGRAMME
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
PROG SYS
BAND LABEL AFT
0
1
2
I
I
I
UHF
UHF
UHF
––––– ON
––––– ON
––––– ON
QUICK
TIMER
COUNTER
RESET
PAUSE
OK
and p r es s
Se l ec t
PLAY
REW
FF
STOP
5 Press + ◊ or – √ until “---” appears in the “SYS” position and press OK.
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
0
1
2
I
UHF
UHF
UHF
––––– ON
––––– ON
––––– ON
–––
I
OK
and p r es s
Se l ec t
When you select programmes using the PROGR +/– buttons, the
programme position is skipped.
6 Repeat steps 4 and 5 to skip other programme positions.
For programme positions
beyond 2
7 Press MENU to go back to the original screen.
The display scrolls by pressing – √
repeatedly.
Getting Started
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Captioning a TV Station Name
You can name a channel using up to five characters (letters or numbers) to
be displayed on the TV screen (e.g. MTV). Using this function, you can
easily identify which channel you are watching.
ON TIMER
SLEEP
MENU
OK
1 Press MENU to display the main menu.
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and
press OK.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
The PROGRAMME PRESET menu appears.
DAILY
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
7
WEEKLY
The MANUAL PROGRAMME menu appears.
÷
PROGR
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
0
1
2
I
I
I
UHF
UHF
UHF
––––– ON
––––– ON
––––– ON
OK
and p r es s
Se l ec t
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
4 Using + ◊ or – √, move the cursor (z) to the programme position you want
to caption and press OK repeatedly until the first element of the “LABEL”
position turns red.
PAUSE
PLAY
REW
FF
STOP
5 Select a letter or number with + ◊ or – √ and press OK.
The next element turns red. Select other characters in the same way. For
the element you want to leave blank, select “-” and press OK.
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
0
1
2
I
I
I
UHF
––––– ON
UHF
––––– OFF
UHF MTV–– ON
OK
Se l ec t
and p r es s
6 After selecting all the characters, press OK repeatedly until the cursor
appears. Now the caption you chose is stored.
If you have made a mistake
Press ? to go back to the previous
position.
7 Repeat steps 4 to 6 to caption other channels.
8 Press MENU to go back to the original screen.
Getting Started
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Fine-Tuning
Normally, the automatic fine-tuning (AFT) is already working. However, if
the picture of a programme is distorted, you can use the manual fine-
tuning function to obtain better picture reception.
ON TIMER
SLEEP
MENU
OK
1 Press MENU to display the main menu.
GB
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and press
VIDEO Plus+
ONCE
OK.
3
6
9
1
4
2
5
8
0
The PROGRAMME PRESET menu appears.
DAILY
3 Move the cursor (z) to “MANUAL PROGRAMME” with + ◊ or – √ and
press OK.
7
WEEKLY
The MANUAL PROGRAMME menu appears.
÷
PROGR
4 Using + ◊ or – √, move the cursor (z) to the programme position which
you want to manually fine-tune.
MANUAL PROGRAMME
PROG SYS
BAND LABEL AFT
TIMER REC
ON/OFF
0
1
2
I
I
I
UHF
UHF
UHF
––––– ON
––––– ON
––––– ON
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
OK
and p r es s
Se l ec t
PLAY
REW
FF
5 Press OK repeatedly until the AFT position turns red, then press + ◊ or – √
STOP
to select OFF.
6 Press OK.
The tuning bar turns red.
While holding down + ◊ or – √, the tuning bar flashes red and green by
turns, and the channel is fine-tuned. When the best TV reception is found,
release + ◊ or – √.
7 Press OK.
The cursor (z) appears. Now the fine-tuned level is stored.
8 Repeat steps 4 to 7 to fine-tune other channels.
To reactivate automatic fine-
tuning (AFT)
Repeat from the beginning and
select “ON” in step 5.
9 Press MENU to go back to the original screen.
Getting Started
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 — Setting up Video Plus+
VIDEO plus+ is a feature that simplifies programming the video TV to
make timer recording. To use VIDEO plus+, each programme position
needs to be matched with its VIDEO plus+ guide channel. To get the
guide channel numbers, see “Guide channels for VIDEO plus+” on page
13, or look in the programme guide for your area that features PlusCodes.
ON TIMER
SLEEP
MENU
OK
Before you begin
• If the u lamp on the video TV is lit in red, press ;, PROGR +/– or a
number button on the Remote Commander.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
Setting the Guide Channels
DAILY
7
1 Press MENU to display the main menu.
WEEKLY
The main menu appears.
÷
PROGR
MENU
VISUAL MODE
ON TIMER SET
CLOCK SET
TRACKING CONTROL
LANGUAGE
PROGRAMME PRESET
DEMONSTRATION
OK
and p r es s
Se l ec t
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
2 Move the cursor (z) to “PROGRAMME PRESET” with + ◊ or – √ and
press OK.
PLAY
The PROGRAMME PRESET menu appears.
REW
FF
STOP
PROGRAMME PRESET
AUTO PROGRAMME
MANUAL PROGRAMME
SET UP GUIDE CH
OK
and p r es s
Se l ec t
3 Move the cursor (z) to “SET UP GUIDE CH” with + ◊ or – √ and press
OK.
The SET UP GUIDE CH menu appears.
SET UP GUIDE CH
PROG LABEL GUIDE CH
1
2
3
1
2
3
- - - - -
- - - - -
- - - - -
If you have made a mistake
Press ? to go back to the previous
position.
LABEL is set by
MANUAL PROGRAMME
OK
Se l ec t and p r es s
Getting Started
12
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Using + ◊ or – √, move the cursor (z) to the programme position (number
button) to which you want to preset the guide channel, and press OK.
The GUIDE CH position turns red.
SET UP GUIDE CH
PROG LABEL GUIDE CH
1
2
3
1
2
3
- - - - -
- - - - -
- - - - -
LABEL is set by
MANUAL PROGRAMME
GB
OK
Se l ec t and p r es s
5 Select the guide channel you want to preset with + ◊ or – √, and press OK.
SET UP GUIDE CH
PROG LABEL GUIDE CH
1
2
56
1
2
3
- - - - -
- - - - -
- - - - -
LABEL is set by
MANUAL PROGRAMME
OK
Se l ec t and p r es s
6 Repeat steps 4 and 5 to preset other channels.
7 After you finish presetting, press MENU to go back to the original screen.
Guide channels for VIDEO plus+
Guide
channel
Station name
Guide
channel
Station name
001
002
003
004
005
006
101
102
103
104
105
106
BBC1
122
123
124
TELECLUB
BBC2
UK GOLD
ITV
DISCOVERY
THE LEARNING CHANNEL
BRAVO
ADULT CHANNEL
CNN
EURONEWS
QVC
UK LIVING
CHANNEL 4
RTE (IRELAND)
NETWORK 2 (IRELAND)
SKY ONE
125
126
127
129
130
131
132
133
134
135
136
137
138
139
SKY NEWS
SKY MOVIES
THE MOVIE CHANNEL
SKY SPORT
RAI 1
RAI 2
NICKELODEON
VH-1 GERMANY
EUROSPORT
GALAVISION
MTV EUROPE
CHILDERN’S CHANNEL
THE FAMILY CHANNEL
SKY MOVIES GOLD
BBC WORLD SERVICE
RTL 4
TV5 EUROPE
TVE INTERNATIONAL
MBC/ARABIC
VTM
107
108
109
110
SPORTNET
COUNTRY MUSIC TV
VIDEO HITS ONE
VH-1
111
112
113
114
140
SKY SPORT 2 & SOAPS &
TRAVEL
SUPER SPORT
FILMNET 2
FILMNET +
141
142
143
144
145
146
147
149
TV ASIA
LA-5
115
116
117
118
119
120
121
RTL PLUS INTERNATIONAL
SAT 1
LIVE TV
SUPERCHANNEL
JAPAN TV
PREMIERE
3 SAT
SELECT TV
MOVIE CHANNEL FILMNET 1
TNT
ARD
PRO 7
TELE 5
CARTOON NETWORK
Getting Started
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 — Setting the Clock
You need to set the clock for using timer recording and quick-timer
recording functions.
1 Press MENU to display the main menu.
MENU
VISUAL MODE
ON TIMER
SLEEP
MENU
OK
ON TIMER SET
CLOCK SET
TRACKING CONTROL
LANGUAGE
PROGRAMME PRESET
DEMONSTRATION
OK
and p r es s
Se l ec t
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
2 Move the cursor (z) to “CLOCK SET” with + ◊ or – √ and press OK.
The CLOCK SET menu appears.
DAILY
CLOCK SET
7
––. ––. –––– ––– –– : ––
WEEKLY
÷
PROGR
OK
p r es s
3 Press OK to start setting the clock.
The day section turns red.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
CLOCK SET
QUICK
TIMER
COUNTER
RESET
1. 1. 1996 MON 0 : 00
PAUSE
PLAY
REW
FF
OK
p r es s
STOP
4 Set the day with + ◊ or – √ and press OK.
The month section turns red.
CLOCK SET
4. 1. 1996 THU 0 : 00
OK
and p r es s
Se l ec t
5 Using + ◊ or – √ and OK, set the month, year, hour and minute in the
same way as in step 4.
If you have made a mistake
CLOCK SET
Press ? to go back to the previous
position.
4. 12. 1996 WED 15 : 30
If the clock has stopped and
“--/--” is displayed
You have to re-set the clock.
OK
and p r es s
Se l ec t
6 After setting the minute, press OK.
The clock starts working.
7 Press MENU to go back to the original screen.
Getting Started
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Muting the Sound
Press ¤.
The ¤ indicator appears and stays on the screen.
To resume normal sound, press ¤ again or Á +.
ON TIMER
SLEEP
MENU
OK
Displaying the On-screen
Information
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
Press
to display the following on-screen information.
To have the programme number and caption stay on the screen, press
again.
DAILY
7
To make the indications disappear, press
displayed on the screen.
until no indications are
WEEKLY
÷
PROGR
ABC
Caption
Programme position
12
TIMER REC
ON/OFF
TIMER ON
SCREEN
4.12WED
20:00
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
Current date and time
PLAY
REW
FF
Adjusting the Picture
STOP
You can select one of four settings for picture effect in the menu. You can
also adjust the picture to suit your own taste.
Selecting the picture effect
1 Press MENU to display the main menu.
MENU
VISUAL MODE
ON TIMER SET
CLOCK SET
TRACKING CONTROL
LANGUAGE
PROGRAMME PRESET
DEMONSTRATION
OK
and p r es s
Se l ec t
2 Move the cursor (z) to VISUAL MODE with + ◊ or – √ and press OK.
The VISUAL MODE menu appears.
VISUAL MODE
PICTURE CONTROL
STANDARD
MILD
MOVIE
OPC: ON
OK
and p r es s
Se l ec t
Basic Operations
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press MENU to go back to the original screen.
The adjusted control levels are stored.
Effect of each control
PICTURE CONTROL
CONTRAST
COLOUR
Effect
Less
More
Less
More
BRIGHTNESS
HUE
Darker
Greenish
Brighter
Reddish
RESET
Resets all the items to the factory preset levels.
Watching Line Input
Press … repeatedly until the desired input indicator appears.
To go back to the normal TV picture, press … until the programme
position appears, or press ; on the Remote Commander once. For details
of the video input picture, see page 35.
ON TIMER
SLEEP
MENU
OK
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
Listening with Headphones
Plug the headphones (not supplied) to the 2 (headphones) jack inside the
front panel on the video TV.
DAILY
7
The sound from the speaker is shut off.
WEEKLY
÷
PROGR
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
PLAY
REW
FF
STOP
Basic Operations
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
1 Press ;, PROGR +/– or number buttons on the Remote Commander, or
PROGR +/– on the video TV when the u lamp is lit in red.
2 Insert a cassette.
If you insert a cassette with its safety tab removed, playback starts
automatically.
3 Set the COLOUR SYSTEM switch to conform to the colour system of the
tape to be played. Normally, set it to AUTO. If streaks appear when
playing a tape, switch it to select the colour system.
PAL: to play a tape recorded in PAL colour system
NTSC: to play a tape recorded in NTSC colour system
4 Press PLAY ·.
Playback starts. On-screen information is displayed for some seconds.
To stop playback
Press STOP p.
The video TV goes back to the normal TV picture.
ON TIMER
SLEEP
MENU
OK
VIDEO Plus+
ONCE
To stop playback for a moment
Press PAUSE P. The picture pauses.
Press PAUSE P again or press PLAY · to resume playback.
If you leave your video TV in pause mode, normal playback resumes after
about 5 minutes to protect the quality of video tapes.
3
6
9
1
4
2
5
8
0
DAILY
7
WEEKLY
÷
To fast forward the tape
PROGR
Press STOP p, then press FF ).
To rewind the tape
Press STOP p, then press REW 0.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
To search a tape at high speed
QUICK
TIMER
COUNTER
RESET
PAUSE
During playback, press and hold REW 0 (rewind) or FF ) (fast
forward).
A high-speed picture appears on the TV screen.
To resume normal playback, release the button.
PLAY
REW
FF
STOP
To view the picture in fast forward or rewind mode
Press and hold FF ) during fast forward or REW 0 during rewind.
While you hold the button, you can view the picture.
When you release the button, fast forward or rewind mode is resumed.
Basic Operations
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV Programmes
Recording TV Programmes
1 Press ;, PROGR +/– or number buttons on the Remote Commander, or
PROGR +/– on the video TV when the u lamp is lit in red.
2 Insert a cassette with a safety tab.
3 Select the programme position with PROGR +/–. You can also use
number buttons on the Remote Commander. For double-digit numbers
(e.g.14), first press ÷, then press 1 and 4.
4 Press REC r.
The REC lamp on the front of the video TV lights up and recording begins.
To stop recording
Press STOP p.
When the tape reaches the end, the video TV rewinds the tape
automatically to the beginning, then stops. This function does not work
when the power of the video TV is off.
ON TIMER
SLEEP
MENU
OK
To pause recording
Press PAUSE P.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
To resume recording, press PAUSE P again.
DAILY
You can cut out an unwanted scene during recording with this button.
1 Press PAUSE P when an unwanted scene appears on the screen.
Recording pauses.
2 Press PAUSE P again to release the pause mode at the desired scene.
Recording resumes from the point set in step 1.
7
WEEKLY
÷
PROGR
When the recording pause mode lasts for about 5 minutes, the video TV
stops recording to protect the quality of video tapes.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
Recording with the TV Off
Press u.
PLAY
REW
FF
The TV screen is turned off and the u lamp lights up.
The video TV continues recording.
STOP
Basic Operations
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
7
Press OK, then set the minute of the recording start time to “15” with + ◊
or – √.
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
––
––
––
––
––
FRI 20 : 15 –– : ––
––
––
––
––
––
––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
ON TIMER
SLEEP
MENU
OK
OK
Se l ec t
and p r es s
Press OK, then set the hour of the recording stop time to “21” with + ◊ or
– √.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
––
––
––
––
––
FRI 20 : 15 21 : ––
––
––
––
––
––
––
DAILY
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
7
WEEKLY
÷
OK
Se l ec t
and p r es s
PROGR
Press OK, then set the minute of the recording stop time to “55” with + ◊
or – √.
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
––
––
––
––
––
TIMER REC
ON/OFF
TIMER ON
SCREEN
FRI 20 : 15 21 : 55
––
––
––
––
––
––
REC
CLEAR
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
QUICK
TIMER
COUNTER
RESET
PAUSE
OK
Se l ec t
and p r es s
PLAY
REW
FF
8
9
Press OK, then set the programme position to “26” with + ◊ or – √.
STOP
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
––
––
––
––
––
FRI 20 : 15 21 : 55
26
––
––
––
––
––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
–– : –– –– : ––
OK
Se l ec t
and p r es s
Press OK.
The cursor (z) appears at the left margin.
10 When you want to set other programmes, press – √ to move down the
If you have made a mistake
during timer setting
cursor to the next line, then repeat steps 2 to 9.
Press ? to go back to the previous
position and correct the setting.
11 Press TIMER REC ON/OFF.
The TIMER REC lamp on the front of the video TV lights up and the video
TV enters timer recording standby mode.
If you try to enter the
recording start time prior to
the current time
All the items of the setting will be
erased.
Press TIMER ON SCREEN to erase the PROGRAMME LIST.
Press u to turn the video off TV if you do not want to watch the TV.
The video TV turns on automatically and starts recording at the preset
start time, and goes off at the preset stop time.
If you try to do incorrect
operation
The video TV displays a message on
the screen to interrupt your setting.
If you turn the U switch off
The TIMER REC buttons do not
fonction.
Basic Operations
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Daily/weekly recording
You can preset your video TV to record the same programme every day of
the week (daily recording) or the same programme on the same day every
week (weekly recording). Press – √ in step 3 until the desired setting
appears in the “DATE” position. With each press, the setting changes as
follows:
ON TIMER
SLEEP
MENU
OK
GB
4 (today) n MON–SUN n MON–SAT n MON–FRI n EVERY SAT n
EVERY FRI n EVERY THU n EVERY WED n EVERY TUE n EVERY
MON n EVERY SUN n 3 (next month) n 2......
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
DAILY
To stop timer recording
7
WEEKLY
Press TIMER REC ON/OFF.
The TIMER REC lamp turns off.
÷
PROGR
Using the Video TV before Timer
Recording Starts
You can watch a TV programme, check the timer settings and reset the
counter in timer recording standby mode. However, press TIMER REC
ON/OFF to turn off the TIMER REC lamp on the front of the video TV to
do the following operations:
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
PLAY
REW
FF
STOP
• ejecting the cassette
• using the tape operation buttons
• changing or cancelling the timer settings
Remember to press TIMER REC ON/OFF again to make the TIMER REC
lamp light after the above operations.
Basic Operations
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the Timer Settings
You can display the list of the timer settings which you preset.
Press TIMER ON SCREEN.
The PROGRAMME LIST appears.
ON TIMER
SLEEP
MENU
OK
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
FRI 20 : 15 21 : 55
26
50
1
7
SAT
8 : 30 10 : 15
0 : 00
MON-SAT 23 : 00
VIDEO Plus+
ONCE
EVERYSUN
––
––
9 : 55 12 : 30
–– : –– –– : ––
–– : –– –– : ––
12
––
––
3
6
9
1
4
2
5
8
0
OK
Se l ec t
and p r es s
DAILY
7
Press TIMER ON SCREEN again to erase the PROGRAMME LIST.
WEEKLY
÷
PROGR
Changing or Canceling the Timer
Settings
1 Press TIMER REC ON/OFF to turn off the TIMER REC lamp on the front
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
of the video TV.
QUICK
TIMER
COUNTER
RESET
PAUSE
2 Press TIMER ON SCREEN to display the PROGRAMME LIST.
PLAY
REW
FF
3 Select the setting you want to change or cancel with + ◊ or – √.
STOP
PROGRAMME LIST
20 : 00
4. 12WED
START STOP PROG
PDC
DATE
6
FRI 20 : 15 21 : 55
26
50
1
7
SAT
8 : 30 10 : 15
0 : 00
MON-SAT 23 : 00
EVERYSUN
––
––
9 : 55 12 : 30
–– : –– –– : ––
–– : –– –– : ––
12
––
––
OK
Se l ec t
and p r es s
4 To change the setting
Using + ◊ or – √ and OK, re-enter all the items.
Refer to “Setting the timer” steps 2 to 9 on pages 23 and 24.
To cancel the setting
Press TIMER REC CLEAR.
5 Press TIMER ON SCREEN to go back to the original screen.
6 If there are other timer settings on the list, press TIMER REC ON/OFF to
set the video TV to timer recording standby mode.
Basic Operations
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording Using the Quick-Timer
You can preset your video TV to start timer recording immediately and to
automatically stop recording after a specific time period.
If you have not set the clock, quick-timer recording cannot be done.
ON TIMER
SLEEP
MENU
OK
GB
If you are recording
1 Press QUICK TIMER on the Remote Commander.
VIDEO Plus+
ONCE
The “QUICK TIMER 0:00” appears on the screen.
3
6
9
1
4
2
5
8
0
2 Press QUICK TIMER repeatedly to select the recording time period. With
DAILY
each press, the time period changes as follows:
7
WEEKLY
÷
0:00
0:30
1:00
....
3:30
4:00
PROGR
Even if you switch off the video TV, it continues recording. After the
selected time period has elapsed, recording stops automatically.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
If you are not recording
QUICK
TIMER
COUNTER
RESET
PAUSE
1 Press ;, PROGR +/– or number buttons on the Remote Commander, or
PROGR +/– on the video TV to switch it on.
PLAY
REW
FF
STOP
2 Insert a cassette with its safety tab.
3 Select the programme position which you want to record.
4 Press QUICK TIMER on the Remote Commander.
The “QUICK TIMER 0:00” appears on the screen.
5 Press QUICK TIMER repeatedly to select the recording time period. With
each press the time period changes as follows:
0:00
0:30
1:00
....
3:30
4:00
To change the recording time
period after quick-timer
recording begins
The time period turns yellow and recording starts.
Even if you switch off the video TV, it continues recording.
When the preset time period has elapsed, the video TV stops recording.
Press QUICK TIMER until the
desired time period appears.
To display the remaining time
period during quick-timer
recording
Press
. The recording time
period decreases minute by minute.
To stop quick-timer recording
Press TIMER REC ON/OFF.
Basic Operations
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer Recording with PDC Signals
The German broadcasting system transmits PDC (Programme Delivery
Control) signals with the TV programmes. These signals assure you that
your timer recordings are made regardless of broadcast delays, early starts,
or broadcast interruptions. For example, if an urgent news bulletin
interrupts a regular programme, recording stops. As soon as the
interrupted programme resumes, recording starts again.
1 If the TIMER REC lamp is lit on the front panel, press TIMER REC ON/
OFF to turn it off.
2 Before setting the timer, press PDC on the inside of the front panel so that
Notes on PDC recording
the PDC lamp lights up.
• If you use PDC recording while
watching the TV, the programme
automatically changes to the timer
recording programme and you
cannot change programmes.
Make sure to use PDC recording
only when the video/TV set is in
standby mode or in power switch
off mode. If you watch the TV
continuously, cancel the PDC
timer recording.
3 Set the timer following the steps in “Setting the timer” (pages 23 and 24).
• If recording times overlap due to a
PDC time shift, the programme
that was broadcast first has
priority. Recording of the second
programme begins when the first
programme has finished.
• If the video TV could not receive a
PDC signal because it was too
weak or because the station failed
to transmit PDC signals, timer
recording is made without the
PDC function.
Basic Operations
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using
VIDEO Plus+
Just enter the programme’s “PlusCode” listed in the TV programme guide.
The date, times and programme position of that programme are set
automatically.
Before you begin
• Press ;, PROGR +/– or a number button on the Remote Commander, or
ON TIMER
SLEEP
MENU
OK
GB
PROGR +/– on the video TV to switch on the video TV.
• Make sure that the time and date clock are set correctly. If not, refer to
“Setting the clock” on page 14.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
• Make sure that the loaded cassette has its safety tab.
1 Press VIDEO Plus+.
DAILY
The SHOWVIEW menu appears.
7
WEEKLY
SHOWVIEW
20:00
4. 12WED
÷
SHOWVIEW NO
]
[
- - - - - - - - -
PROGR
Set 0-9 and
press ONCE DAILY WEEKLY
2 Press the number buttons to enter the desired programme’s PlusCode.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
SHOWVIEW
20:00
4. 12WED
QUICK
TIMER
COUNTER
RESET
SHOWVIEW NO
PAUSE
[
]
82477691-
PLAY
REW
FF
Set 0-9 and
press ONCE DAILY WEEKLY
STOP
3 Press ONCE, DAILY or WEEKLY you want to set.
For each setting, see table below.
To record the programme
Only once
Press
ONCE
Monday to Friday at the same scheduled time
Every week at the same scheduled time
DAILY
WEEKLY
The recording information appears: date, start and stop times,
programme position number.
If you have made a mistake
entering programme‘s
PlusCode
SHOWVIEW
20:00
4. 12WED
SHOWVIEW NO
82477691-
[
]
Press TIMER REC CLEAR and re-
enter the correct number.
DATE START STOP PROG
6
FRI 20:00 22:00 58
Press TIMER REC
[ON/OFF]button
Check that the information is correct. If it is not, press TIMER CLEAR to
cancel the setting.
Basic Operations
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Repeat steps 2 and 3 to preset another timer setting.
5 Press TIMER REC ON.
The TIMER REC lamp on the front of the video TV lights up and the video
TV enters timer recording standby mode.
ON TIMER
SLEEP
MENU
OK
To stop recording
To stop the video TV while recording a programme, press pSTOP.
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
DAILY
7
WEEKLY
÷
PROGR
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
PLAY
REW
FF
STOP
Basic Operations
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Operations
Switching off Automatically — Sleep
Timer
You can automatically switches the video TV into standby mode after a
selected time period.
Press SLEEP.
With each press, the time period (in minutes) changes as follows:
ON TIMER
SLEEP
MENU
OK
OFF
30
60
90
GB
VIDEO Plus+
ONCE
One minute before the TV switches into standby mode, a message ‘‘Good
night’’ is displayed on the screen.
3
6
9
1
4
2
5
8
0
DAILY
7
WEEKLY
÷
PROGR
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
PLAY
REW
FF
STOP
To cancel the timer
Press SLEEP to select “OFF”.
Additional Operations
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on at Your Desired Time
— On Timer
You can preset your video TV to automatically switch on at a desired time.
You can select the TV programme or video playback to be switched on.
1 Press MENU to display the main menu.
2 Move the cursor (z) to “ON TIMER SET” with + ◊ or – √ and press OK.
ON TIMER
SLEEP
MENU
OK
The ON TIMER SET menu appears.
ON TIMER SET
20 : 00
4. 12WED
TIME:
SOURCE:
ON TIMER:
6 : 00
TV PROG
OFF
1
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
OK
Se l ec t
and p r es s
DAILY
7
3 Press OK.
WEEKLY
The timer setting hour section turns red.
÷
PROGR
4 Set the hour with + ◊ or – √ and press OK.
The minute section turns red.
5 Set the minutes (by one minute) with + ◊ or – √ and press OK.
TIMER REC
ON/OFF
TIMER ON
SCREEN
REC
CLEAR
The cursor appears beside “TIME.”
QUICK
TIMER
COUNTER
RESET
PAUSE
6 Move the cursor (z) to “SOURCE” with + ◊ or – √ and press OK.
PLAY
7 Select TV or VCR (video playback) to be switched on with + ◊ or – √ and
REW
FF
press OK.
STOP
When you select TV, select the programme position with + ◊ or – √ and
press OK.
ON TIMER SET
20 : 00
4. 12WED
TIME:
SOURCE:
ON TIMER:
7 : 30
TV PROG 12
OFF
OK
Se l ec t
and p r es s
8 Move the cursor (z) to “ON TIMER” with + ◊ or – √ and press OK, then
select ON with + ◊ or – √ and press OK.
To erase the message
9 Press MENU to go back to the original screen.
Press any button on the video TV or
Remote Commander.
10 Press ON TIMER.
The ON TIMER lamp on the front of the video TV lights up.
If you are not using the video TV, press u to set the video TV in standby
mode.
At the preset time, the video TV automatically switches on and a message
“Good morning” is displayed for five minutes.
If you do not press any button for 2 hours, the video TV automatically
shuts off.
Additional Operations
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Function
Problems
Possible causes and remedies
TV reception
No picture (screen is • The mains lead is disconnected.
dark), no sound /Connect the mains lead.
• The video TV is switched off.
/Press ;, PROGR +/– or programme number on the Remote
Commander, or PROGR +/– on the video TV.
Good picture but no • The headphones are connected to 2 jack.
sound
/Disconnect the headphones.
• The ¤ is displayed on the screen.
/Press ¤.
• Press Á +/–.
No colour or poor
colour(screen is
dark) for colour
programmes, but
good sound.
• Adjust “CONTRAST,” “COLOUR,” and “BRIGHTNESS” in the
PICTURE CONTROL menu. (page 17)
No picture, no
sound
• The connecting cord between the video TV and the input source is
disconnected.
from video input /Connect it firmly.
source
• Input is not selected correctly.
/Press … until the desired input indicator appears. (page 35)
Clock and
timer
The clock has
stopped and “--/--”
is displayed.
• The power has been interrupted, the U switch is turned off or the
mains lead is disconnected for more than a week.
/Re-set the clock and timer settings if necessary. (pages 14, 23)
The clock loses or
gains.
• The power has been interrupted, the U switch is turned off or the
mains lead is disconnected for less than a week.
/Re-set the clock and timer settings if necessary. (pages 14, 23)
Playback
Power is on, but the
tape does not run.
• The safety device has been activated.
/Switch off, disconnect the mains lead, and leave the set for about
one minute.
Poor playback
picture
• The COLOUR SYSTEM switch is set to incorrect position.
/Set COLOUR SYSTEM to the position corresponding to the colour
system with which the tape is recorded. (page 20)
• Adjust the tracking. (page 33)
• The video heads are dirty.
/Clean the heads using the Sony V-25CL video head cleaning tape
(page 38). If the cleaning tape is not available in your area, have
the heads cleaned at your nearest Sony service facility. (Do not use
a commercially available wet-type cleaning tape, as it may
damage the video heads.)
• The tape is worn out.
/Use a new tape.
The sound drops
out.
• The tape is defective.
/Use a new tape.
Additional Information
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Function
Problems
Possible causes and remedies
• The safety tab of the cassette has been removed.
/Cover the tab hole with adhesive tape, or use another cassette
with a safety tab. (page 19)
Recording
The cassette is ejected
when you press
REC r.
Recording cannot be • No cassette has been inserted.
done.
/Insert a cassette with the safety tab.
• The tape is at its end.
GB
/Rewind the tape.
Timer
recording
Timer settings cannot • The clock has not been set.
be made. /Set the current time and date. (page 14)
• You have made a mistake when setting the timer.
/Check the setting steps. (pages 23 to 25)
The cassette is ejected • The safety tab of the cassette has been removed.
when you press /Cover the tab hole with adhesive tape, or use another cassette
TIMER REC ON/
OFF.
with a safety tab.
The TIMER REC lamp
does not light up
even though you
press TIMER REC
ON/OFF.
• No cassette has been inserted.
/Insert a cassette with its safety tab.
• The tape is at its end.
/Rewind the tape.
• No setting is made for timer recording.
/Set the programme for timer recording. (pages 23 to 25)
Timer recording was
not made.
• You did not press TIMER REC ON/OFF.
• There has been a power interruption lasting more than a week.
A cassette cannot be
inserted.
• Another cassette is already inserted.
/Press 6 to eject the cassette.
Others
The Remote
Commander does not
work.
• The batteries are low.
/Replace the batteries. (page 4)
• The batteries are installed incorrectly.
/Install the batteries with correct polarities. (page 4)
Additional Information
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Care of Your Video TV
Video Head Cleaning
When playback pictures are noisy and hardly visible, or when no picture
appears, the video heads may be contaminated. In such a case, clean the
video heads using the V-25CL video head cleaning tape (not supplied), or
ask Sony service personnel to clean the video heads, with this service there
would be a standard charge.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
terminal
Worn Video Heads
If your video TV displays a poor picture after you clean the video heads,
you may need to replace them. Consult your dealer or the Sony Service
Center nearest you.
Check the Video Heads after 1,000
Hours of Use
A video TV is a high precision machine. It must record on or play from
magnetic tapes on which the image signals from the colour TV or the
video camcorder are recorded.
Note
The video heads or mechanical parts for transporting the tape are
contaminated or worn after extended use. You should have your video TV
checked after each 1,000 hours of use.
Do not use a commercially available
wet-type cleaning tape, as it may
damage the video heads.
About Moisture Condensation
If the unit is brought directly from a cold place to a warm place, moisture
may condense on the video head drum. If this happens, the tape may stick
to the head drum and it may be damaged or the unit may not operate
correctly. To avoid possible damage caused by moisture condensation, be
sure not to leave a cassette inside the compartment when the unit is not in
use. When bringing the unit from a cold place to a warm place, wait for
about 10 minutes before operating it.
If the tape operation buttons do not work due to moisture condensation,
leave the unit for more than one hour with the power on.
Additional Information
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
TV Section
Television system I
Colour system
Channel coverage See “Television channel number
guide” at the next page.
General
Clock
Clock back up
Clock requirements
Quartz locked
Approx. 7 days
PAL
220-240 V AC, 50 Hz
Picture tube
Trinitron
Power consumption
Approx. 37 cm (145/8 inches)
(Approx. 34 cm picture
measured diagonally)
UHF
60 W
Operating temperature
5°C to 40°C (41°F to 104°F)
Storage temperature
–20°C to 60°C (-4°F to 140°F)
GB
Aerial in
Video Section
Format
Video recording system
Rotary 2-head helical scanning
system
Audio recording system
Dimensions
Approx. 391 × 409 × 443 mm
(w/h/d) (151/2 × 161/8 × 171/2
inches)
VHS standard
Mass
Approx. 15 kg (33 lb 1 oz)
Accessories supplied
Remote Commander (1)
Monaural
PAL
PAL: 23.39 mm/sec.
NTSC (playback only): 33.35
mm/sec.
Video signal
Tape speed
R6 (size AA) batteries (2)
Loop aerial (1)
Design and specifications are subject to change
without notice.
Maximum recording time
240 minutes with E-240
Note
Inputs and Outputs
This appliance conforms with the EU Directive 89/
336/EEC regarding interference suppression.
Inputs
LINE IN VIDEO: phono jack (1)
1 Vp-p, 75 ohms, unbalanced,
sync negative
LINE IN AUDIO: phono jack (1)
Input level: 500 mVrms (100%
modulation)
EURO-AV: 21-pin
EURO-AV: 21-pin
Output
Headphones jack Monaural minijack
Additional Information
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Television Channel Number Guide
Only the main transmitters are listed. Information regarding the regional sub-relay channel numbers can be
obtained by contacting The BBC Engineering Information Dept. (0181) 752 5040.
MAIN TRANSMITTERS BBC1 BBC2 ITV CH4
London & South East
1 Bluebell Hill
2 Crystal Palace
3 Dover
40
26
50
49
57
46
33
56
52
63
43 65
23 30
66 53
64 67
60 53
4 Heathfield
5 Oxford
South-West
6 Beacon Hill
7 Caradon Hill
8 Huntshaw Cross
9 Redruth
!º Stockland Hill
Channel Islands
!¡ Fremont Point
South
57
22
55
51
33
63
28
62
44
26
60 53
25 32
59 65
41 47
23 29
51
44
41 47
!™ Hannington
!£ Midhurst
!¢ Rowridge
West
39
61
31
45
55
24
42 66
58 68
27 21
!∞ Mendip
58
64
61 54
East
!§ Sandy Heath
!¶ Sudbury
31
51
62
27
44
55
24 21
41 47
59 65
!• Tacolneston
Midlands (West)
!ª Ridge Hill
@º Sutton Coldfiled
@¡ The Wrekin
Midlands (East)
@™ Waltham
Northern Ireland
@£ Brougher Mountain
@¢ Divis
22
46
26
28
40
33
25 32
43 50
23 29
58
64
61 54
22
31
55
28
27
62
25 32
24 21
59 65
@∞ Limavady
North
@§ Belmont
@¶ Emley Moor
North-West
@• Winter Hill
North-East
22
44
28
51
25 32
47 41
55
62
59 65
@ª Bilsdale West Moor
#º Caldbeck
#¡ Chatton
33
30
39
56
26
34
45
64
29 23
28 32
49 42
61 54
#™ Pontop Pike
Scotland
#£ Angus
57
40
22
–
31
33
22
33
40
33
39
31
55
63
46
67
–
27
26
28
26
46
26
45
27
62
60 53
43 50
#¢ Black Hill
#∞ Sandale
–
–
#§ Caldbeck
#¶ Craigkelly
#• Darvel
28 32
24 21
23 29
25 32
23 29
43 50
23 29
49 42
24 21
59 65
#ª Durris
$º Eitshal (Lewis)
$¡ Keelylang Hill
$™ Knock More
$£ Rosemalkie
$¢ Rumster Forest
$∞ Selkirk
Wales
$§ Blaenplwyf
$¶ Carmel
31
57
57
52
46
44
27
63
63
45
40
51
24 21
60 53
60 53
49 42
43 50
41 47
$• Llanddona
$ª Moel-y-Parc
%º Presely
%¡ Wenvoe
Additional Information
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
Video TV Set—Front
This section briefly describes the buttons and controls on the video TV set and on the Remote Commander.
For more information, refer to the pages next to each description.
GB
OPEN
EJECT
PROOR
REC
TIMER REC
ON TIMER
OPC
u
AUTO
ON
OFF
PAL
NTSC
PDC
TIMER REC
ON/OFF
REC
AUTO
REPEAT
COLOUR
SYSTEM
1 Lamps
REC(recording) (page 22)
9 Á (volume) +/– buttons (page 15)
!º PROGR(programme) +/– buttons (page 15)
!¡ Remote sensor
TIMER REC(recording) (page 24)
ON TIMER (page 32)
PDC (page 28)
2 u (standby) lamp (page 15)
3 u (standby) button (page 15)
4 Cassette compartment (page 19)
!™ Tape transport buttons (page 20)
!£ … (input select) button (pages 18, 35)
!¢ PDC button (page 28)
5 …2/≤2 (video/audio input) jacks (page 35)
6 2 (headphones) jack (page 18)
!∞ TIMER REC ON/OFF button (pages 25, 26)
!§ REC(recording) r button (page 22)
7 U (MAIN POWER) switch (page 15)
8 EJECT 6 button (page 19)
!¶ AUTO REPEAT ON/OFF switch (page 21)
!• COLOUR SYSTEM switch (page 20)
Additional Information
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Commander
1 6 (eject)button (page 19)
2 ; (TV power on) button (pages 6, 15)
3 ¤ (muting) button (page 16)
4 ON TIMER button (page 32)
5 SLEEP button (page 31)
6 VIDEO Plus+ buttons
ONCE button (page 29)
DAILY button (page 29)
WEEKLY button (page 29)
ON TIMER
SLEEP
MENU
OK
7 Teletext operation buttons
The buttons do not function on this video TV.
8 REC (recording) r button (page 22)
9 QUICK TIMER button (page 27)
!º Tape transport buttons (page 20)
· PLAY, p STOP, P PAUSE, 0 REW
(rewind), ) FF (fast forward)
!¡ u (standby) button (page 15)
VIDEO Plus+
ONCE
3
6
9
1
4
2
5
8
0
DAILY
7
WEEKLY
÷
PROGR
!™
(Teletext) button
The button does not function on this video
TV.
!£ … (input select)/ button (pages 18, 35)
TIMER REC
ON/OFF
TIMER ON
SCREEN
The
TV.
button does not function on this video
REC
CLEAR
QUICK
TIMER
COUNTER
RESET
PAUSE
!¢ Menu operation buttons (pages 6, 7)
MENU
PLAY
REW
FF
+ ◊/– √
STOP
?
OK
!∞ Number button (page 6, 15)
!§
(on-screen display) button (pages 16, 21)
!¶ PROGR (programme) +/– buttons (page 15)
!• Á (volume) +/– /√/◊ (Teletext page access)
buttons (page 15)
The √/◊ buttons do not function on this
video TV.
!ª TIMER REC buttons
TIMER ON SCREEN (pages 24, 26)
ON/OFF (pages 24, 26)
CLEAR (page 26, 29)
@º COUNTER RESET button (page 21)
Additional Information
42
Download from Www.Somanuals.com. All Manuals Search And Download.
|