4-235-542-11(1)
FM Stereo
FM-AM Receiver
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear panel. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No.
Serial No.
STR-SL7
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Parts Identification
Receiving Broadcasts
Manual memory .................................. 24
Automatic memory .............................. 24
Tuning to preset stations...................... 25
Automatic tuning ................................. 25
Direct tuning ........................................ 25
Main unit ............................................... 4
Hooking Up the Components
Required cords ....................................... 5
Antenna hookups ................................... 6
Video component hookups .................... 7
Digital component hookups................... 8
Multi channel input hookups ................. 9
Other hookups ..................................... 10
Other Operations
Using the Sleep Timer ......................... 26
Adjustments using the SET UP button... 26
Additional Information
Hooking Up and Setting Up
the Speaker System
Precautions .......................................... 27
Troubleshooting................................... 27
Speaker system hookups ..................... 11
Performing initial setup operations ..... 13
Multi channel surround setup .............. 13
Checking the connections .................... 18
Specifications ...................................... 29
Tables of settings using LEVEL/SURR
and SET UP buttons ...................... 31
Adjustable parameters for each sound
field ............................................... 32
Before you use your remote ................ 33
Remote button description................... 33
Basic Operations
Selecting the component ..................... 18
Changing the factory setting of
a function button ............. Back cover
Enjoying Surround Sound
Selecting a sound field ........................ 19
Understanding the multi channel
surround displays .......................... 21
Customizing sound fields .................... 22
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
Main unit
1
2
3 456 7
8
9
0
qa
qs
ql
qk
qd
qjqhqgqf
AUX 6 (18)
Cursor buttons (U/u) qh (14, 22–
26)
Display qk (21)
DVD 3 (18)
LEVEL/SURR qj (22, 23)
MASTER VOLUME qa (17, 18)
MEMORY/ENTER qf (24)
MULTI CH IN 8 (18)
MULTI CHANNEL DECODING
indicator 5
MUTING qd (18)
PHONES jack ql (18)
SET UP q; (14, 26)
SOUND FIELD +/– qs (19, 23)
TUNER 9 (25)
TUNER FM/AM 7 (18, 24, 25)
TV 4 (18)
VIDEO 2 (18)
?/1 (power) 1 (13, 17, 18, 23)
+/– qg (14, 22–26)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the Components
Required cords
Before you get started
•
•
•
•
Turn off the power to all components before making any connections.
Do not connect the AC power cord until all of the connections are completed.
Be sure to make connections firmly to avoid hum and noise.
When connecting optical digital cords, take the caps off the connectors and insert the cord plugs straight
in until they click into place.
•
Do not bend or tie the optical digital cord.
A Audio cord (not supplied)
White (L)
Red (R)
White (L)
Red (R)
B S-video cord (not supplied)
Yellow (video)
Yellow (video)
Black
C Optical digital cord (not supplied)
Black
D Coaxial digital cord (supplied)
Orange
Orange
Black
E Monaural audio cord (not supplied)
Black
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna hookups
FM wire antenna
(supplied)
AM loop antenna
(supplied)
IN
IN
IN
IN
MONITOR OUT
ANTENNA
S-VIDEO
FM
U
AM
75Ω COAXIAL
L
OUT
CENTER
DIGITAL
R
OPTICAL OPTICAL COAXIAL
AUDIO IN
FRONT SURROUND SUB WOOFER
SUB
WOOFER
AUX
TV
DVD
VIDEO
MULTI CH INPUT
Notes on antenna hookups
•
To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
•
•
Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep it
as horizontal as possible.
•
Do not use the U SIGNAL GND terminal for
grounding the receiver.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Video component hookups
For details on the required cords (A – E), see page 5.
TV monitor
INPUT
S-VIDEO
IN
C
IN
IN
IN
IN
MONITOR OUT
ANTENNA
S-VIDEO
FM
U
AM
75Ω COAXIAL
L
OUT
CENTER
DIGITAL
R
OPTICAL OPTICAL COAXIAL
AUDIO IN
FRONT SURROUND SUB WOOFER
SUB
WOOFER
AUX
TV
DVD
VIDEO
MULTI CH INPUT
B
A
OUTPUT
S-VIDEO
OUT
AUDIO
OUT
VCR
L
R
To apply sound effects to the
audio from the TV
You can connect your TV’s audio output jacks
to the VIDEO AUDIO IN jacks on the receiver
and apply sound effects to the audio from the
TV. In this case, do not connect the TV’s video
output jack to the VIDEO IN jack on the
receiver.
To adjust the volume of TV using the remote,
assign the VIDEO button to TV (back cover).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Digital component hookups
Connect the digital output jacks of your DVD player (etc.) to the receiver’s digital input jacks to
bring the multi channel surround sound of a movie theater into your home. To fully enjoy multi
channel surround sound, five speakers (two front speakers, two surround speakers, and a center
speaker) and a sub woofer are required.
OUTPUT
S-VIDEO
OUT
DVD player
(etc.)
OUTPUT
DIGITAL
COAXIAL
D
B
IN
IN
IN
IN
MONITOR OUT
ANTENNA
S-VIDEO
FM
U
AM
75Ω COAXIAL
L
OUT
CENTER
DIGITAL
R
OPTICAL OPTICAL COAXIAL
AUDIO IN
FRONT SURROUND SUB WOOFER
SUB
WOOFER
AUX
TV
DVD
VIDEO
MULTI CH INPUT
C
B
S-VIDEO
OUT
OUTPUT
Digital
satellite
tuner (etc.)
DIGITAL
OPTICAL
OUTPUT
Notes
• The OPTICAL input jacks are compatible with 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
• The COAXIAL input jack is compatible with 96 kHz, 48 kHz, 44.1 kHz and 32 kHz sampling frequencies.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Multi channel input hookups
Although this receiver incorporates a multi channel decoder, it is also equipped with multi channel
input jacks. These connections allow you to enjoy multi channel software encoded in formats other
than Dolby Digital and DTS. If your DVD player is equipped with multi channel output jacks, you
can connect them directly to the receiver to enjoy the sound of the DVD player’s multi channel
decoder. Alternatively, the multi channel input jacks can be used to connect an external multi channel
decoder.
To fully enjoy multi channel surround sound, five speakers (two front speakers, two surround
speakers, and a center speaker) and a sub woofer are required. Refer to the operating instructions
supplied with your DVD player, multi channel decoder, etc., for details on the multi channel
hookups.
Tips
• To specify the video input to be used with the audio signals from the MULTI CH INPUT jacks, set the MULTI
CH IN visual input in the SET UP menu (page 26).
• You can use cord A instead of 2 cords E.
Notes
• When using the connections described below, adjust the level of the surround speakers and sub woofer from the
DVD player or multi channel decoder.
• See page 11 for details on speaker system hookup.
IN
IN
IN
IN
MONITOR OUT
ANTENNA
S-VIDEO
FM
U
AM
75Ω COAXIAL
L
OUT
CENTER
DIGITAL
R
OPTICAL OPTICAL COAXIAL
AUDIO IN
FRONT SURROUND SUB WOOFER
SUB
WOOFER
AUX
TV
DVD
VIDEO
MULTI CH INPUT
A
A
E
E
FRONT SURROUND CENTER
L
DVD player,
Multichannel decoder, etc.
R
SUB
WOOFER
MULTI CH OUT
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Other hookups
IN
IN
IN
IN
MONITOR OUT
ANTENNA
S-VIDEO
FM
U
AM
75Ω COAXIAL
L
OUT
CENTER
DIGITAL
R
OPTICAL OPTICAL COAXIAL
AUDIO IN
FRONT SURROUND SUB WOOFER
SUB
WOOFER
AUX
TV
DVD
VIDEO
MULTI CH INPUT
C
B
S-VIDEO
OUT
OUTPUT
Audio/video
component
DIGITAL
OPTICAL
OUTPUT
AUX hookups
Connecting the AC power
cord
If you have an individual audio/video
component
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (see page 11).
Use an optical digital cord (not supplied) to
connect the optical output jack on the CD
player, MD deck, or video game player to the
AUX OPTICAL jack on the receiver so that
you can listen to stereo sources in surround
sound.
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
Note
If the AC power cord is disconnected for about two
weeks, the receiver’s entire memory will be cleared
and the demonstration will start.
Use the S-video cable (not supplied) to connect
the S-video output jack on your video
component to the AUX S-VIDEO IN jack on
the receiver.
AC power cord
b
10
To a wall outlet
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up and Setting Up the Speaker System
Speaker system hookups
Before connecting speakers, be sure to turn off this unit.
Required cords
A Speaker cords (not supplied)
(+)
(+)
(–)
(–)
B Monaural audio cord (not supplied)
Black
Black
Front speaker (R)
Active sub woofer
Center speaker
Front speaker (L)
INPUT
AUDIO
IN
E
e
E
e
e
E
A
A
B
A
+
+
–
+
–
+
–
OUT
–
R
L
R
L
SURROUND
CENTER
FRONT
SUB
WOOFER
(IMPEDANCE USE 8–16Ω)
SPEAKERS
A
A
e
E
e
E
Surround speaker
(R)
Surround speaker
(L)
continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker system hookups (continued)
After connecting all the components,
speakers, and AC power cord, output
a test tone to check that all the
speakers are connected correctly.
For details on outputting a test tone,
see page 17.
To avoid short-circuiting the
speakers
Short-circuiting of the speakers may damage
the receiver. To prevent this, make sure to take
the following precautions when connecting the
speakers.
If no sound is heard from a speaker while
outputting a test tone or a test tone is output
from a speaker other than the one whose name
is currently displayed on the receiver, the
speaker may be short-circuited. If this happens,
check the speaker connection again.
Make sure the stripped ends of each
speaker cord does not touch another
speaker terminal or the stripped end of
another speaker cord.
To avoid damaging your
speakers
Examples of poor conditions of the
speaker cord
Make sure that you turn down the volume
before you turn off the receiver. When you turn
on the receiver, the volume remains at the level
you turn off the receiver.
Stripped speaker cord is touching another
speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing initial setup
operations
Multi channel surround
setup
Once you have hooked up the speakers and
turned on the power, clear the receiver’s
memory. Then specify the speaker parameters
(size, position, etc.) and perform any other
initial setup operations necessary for your
system.
For the best possible surround sound, all
speakers should be the same distance from the
listening position (A).
However, the receiver lets you to place the
center speaker up to 5 feet closer (B) and the
surround speakers up to 15 feet closer (C) to
the listening position.
Tip
To check the audio output during settings (to set up
while outputting the sound), check the connection
(see page 18).
The front speakers can be placed from 3 to
40 feet from the listening position (A).
You can place the surround speakers either
behind you or to the side, depending on the
shape of your room (etc.).
Clearing the receiver’s
memory
Before using your receiver for the first time, or
when you want to clear the receiver’s memory,
do the following.
When placing surround speakers to your side
B
This procedure is not necessary if the
demonstration activates when you turn on the
power.
A
A
45°
C
C
1 Turn off the receiver.
90°
2 Hold down ?/1 for 5 seconds.
The demonstration starts (see page 2) and
all of the following items are reset or
cleared:
20°
• All sound field parameters are reset to
their factory settings.
When placing surround speakers behind you
• All SET UP parameters are reset to
B
their factory settings.
A
A
• The sound fields memorized for each
program source and preset stations are
cleared.
45°
C
C
• The master volume is set to “MIN”.
90°
Performing initial setup
operations
20°
Before using your receiver for the first time,
adjust SET UP parameters so that the receiver
correspond to your system. For the adjustable
parameters, see the table on page 31. See pages
13–17 for speaker settings and page 26 for
other settings.
Note
Do not place the center speaker farther away from the
listening position than the front speakers.
continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips for the speaker settings
Multi channel surround setup
(continued)
When you use micro satellite speaker system, you can
easily adjust the settings for the speaker size and sub
woofer selection. Turn off the power, then turn on
again while pressing the cursor button U. “MICRO
SP.” appears in the display and the speaker size and
the sub woofer selection are fixed to the following
settings.
Specifying the speaker
parameters
1 Press SET UP.
2 Press the cursor buttons (U or u) to
select the parameter you want to
adjust.
Speakers
Front
Settings
SMALL
SMALL
SMALL
S.W. YES
Center
Surround
Sub woofer
3 Press + or – to select the setting you
want.
The setting is stored automatically.
You cannot change the configuration if you choose
MICRO SP.
To reset to the normal settings, turn off the power,
then turn on again while pressing the cursor button U.
4 Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
L
R
x Front speaker size (
•
)
Parameter
Initial setting
LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”.
L
R
(FRONT)
C
(CENTER)
LARGE
SR
SL
•
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer.
(SURR)
LARGE
SW
L
(SUB WOOFER)
S.W. YES
R
(FRONT) XX.X m
DIST. 16 feet
DIST. 16 feet
DIST. 11 feet
PL. BEHD.
C
(CENTER) XX.X m
SR
SL
SL
SL
(SURR) XX.X m
•
When the front speakers are set to “SMALL”,
the center and surround speakers are also
automatically set to “SMALL” (unless
previously set to “NO”).
SR
(SURR) PL. XXX
SR
(SURR) HGT. XXX
HGT. LOW
C
x Center speaker size (
)
•
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. However, if the front speakers are
set to “SMALL”, you cannot set the center
speaker to “LARGE”.
•
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.*1
•
If you do not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers.*2
14
Download from Www.Somanuals.com. All Manuals Search And Download.
SR
SW
SL
x Sub woofer selection (
)
x Surround speaker size (
)
•
•
If you connect a sub woofer, select “S.W. YES”.
•
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. However, if the front speakers are
set to “SMALL”, you cannot set the surround
speakers to “LARGE”.
If you do not connect a sub woofer, select
“S.W. NO”. This activates the bass redirection
circuitry and outputs the LFE signals from other
speakers.
•
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the sub
woofer or other “LARGE” speakers.
•
In order to take full advantage of the Dolby
Digital bass redirection circuitry, we
recommend setting the sub woofer’s cut off
frequency as high as possible.
L
R
x Front speaker distance (
)
•
If you do not connect surround speakers, select
“NO”.*3
Set the distance from your listening position to
the front speakers (A on page 13).
Tip
C
x Center speaker distance (
)
*1–*3 correspond to the following Dolby Pro Logic
Set the distance from your listening position to
the center speaker. Center speaker distance
should be set from a distance equal to the front
speaker distance (A on page 13) to a distance
5 feet closer to your listening position (B on
page 13).
modes
*1 NORMAL
*2 PHANTOM
*3 3 STEREO
Tip
Internally, the LARGE and SMALL settings for each
speaker determine whether or not the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount of
directionality, it best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to “LARGE” if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
bass frequencies output from that speaker, set it to
“SMALL”.
SR
SL
x Surround speaker distance (
)
Set the distance from your listening position to
the surround speakers. Surround speaker
distance should be set from a distance equal to
the front speaker distance (A on page 13) to a
distance 15 feet closer to your listening
position (C on page 13).
continued
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
SR
SL
Multi channel surround setup
(continued)
x Surround speaker position (
)*
This parameter lets you specify the location of
your surround speakers for proper
implementation of the Digital Cinema Sound
surround modes in the “VIRTUAL” sound
fields. Refer to the illustration below.
Tip
The receiver allows you to input the speaker position
in terms of distance. However, it is not possible to set
the center speaker further than the front speakers.
Also, the center speaker cannot be set more than
5 feet closer than the front speakers.
Likewise, the surround speakers can not be set farther
away from the listening position than the front
speakers. And they can be no more than 15 feet
closer.
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer
than the actual location of the speakers will cause a
delay in the output of the sound from that speaker. In
other words, the speaker will sound like it is farther
away.
•
Select “PL. SIDE” if the location of your
surround speakers corresponds to section A.
•
Select “PL. BEHD.” if the location of your
surround speakers corresponds to section B.
This setting only effects the surround modes in
the “VIRTUAL” sound fields.
For example, setting the center speaker distance
3~6 feet closer than the actual speaker position will
create a fairly realistic sensation of being “inside” the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound
stage.
90°
A
A
45°
B
B
20°
Adjusting these parameter while listening to the
sound often results in much better surround sound.
Give it a try!
SR
SL
x Surround speaker height (
)*
This parameter lets you specify the height of
your surround speakers for proper
implementation of the Digital Cinema Sound
surround modes in the “VIRTUAL” sound
fields. Refer to the illustration below.
•
Select “HGT. LOW” if the location of your
surround speakers corresponds to section A.
•
Select “HGT. HIGH” if the location of your
surround speakers corresponds to section B.
This setting only effects the surround modes in
the “VIRTUAL” sound fields.
B
A
B
A
60
30
*
These parameters are not available when
“Surround speaker size” is set to “NO”.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Adjusting the speaker level
The surround speaker position parameter is designed
specifically for implementation of the Digital Cinema
Sound modes in the “VIRTUAL” sound fields.
With the Digital Cinema Sound modes, speaker
position is not as critical as other modes. All of the
modes in the “VIRTUAL” sound fields were
designed under the premise that the surround speaker
would be located behind the listening position, but
presentation remains fairly consistent even with the
surround speakers positioned at a rather wide angle.
However, if the speakers are pointing toward the
listener from the immediate left and right of the
listening position, the “VIRTUAL” sound fields will
not be effective unless the surround speaker position
parameter is set to “PL. SIDE”.
Use the remote while seated in your listening
position to adjust the level of each speaker.
Note
The receiver incorporates a new test tone with a
frequency centered at 800 Hz for easier speaker level
adjustment.
1 Press ?/1 to turn on the receiver.
2 Press TEST TONE on the remote.
You will hear the test tone from each
speaker in sequence.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using “PL. BEHD.” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
3 Adjust the level parameters so that the
level of the test tone from each speaker
sounds the same when you are in your
main listening position.
Therefore, although it may result in a setting contrary
to the “Surround speaker position” explanation, we
recommend that you playback multi channel surround
encoded software and listen to the effect each setting
has on your listening environment. Choose the setting
that provides a good sense of spaciousness and that
best succeeds in forming a cohesive space between
the surround sound from the surround speakers and
the sound of the front speakers. If you are not sure
which sounds best, select “PL. BEHD.” and then use
the speaker distance parameter and speaker level
adjustments to obtain proper balance.
To adjust the balance and level of speakers,
press MENU < / > on the remote to select
the level parameter you want to adjust (page
22). Then press MENU +/– to select the
setting.
4 Press TEST TONE again to turn off the
test tone.
Tip
You can adjust the level of all speakers at the same
time. Turn MASTER VOLUME on the main unit or
press MASTER VOL +/– on the remote.
Notes
• The adjusted value are shown in the display during
adjustment.
• Although these adjustments can also be made via
the front panel using the LEVEL menu (when the
test tone is output, the receiver switches to the
LEVEL menu automatically), we recommend you
follow the procedure described above and adjust the
speaker levels from your listening position using the
remote.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Checking the connections
Selecting the component
After connecting all of your components to the
receiver, do the following to verify that the
connections were made correctly.
Function buttons
Press a function button to select the component
you want to use.
1 Press ?/1 to turn on the receiver.
2 Press a function button to select a
component (program source) that you
connected (e.g., DVD player).
To select
Press
VCR
VIDEO
DVD
DVD player
3 Turn on the component and start
Digital satellite tuner (etc.)
Tuner
TV
playing it.
TUNER FM/AM
AUX
4 Rotate MASTER VOLUME to turn up the
An audio/video
component
volume.
After turning on the component you selected,
select the component and play the program
source.
If you do not obtain normal sound output after
performing this procedure, see
“Troubleshooting” on page 27 and take the
appropriate measures to correct the problem.
MULTI CH IN
Press MULTI CH IN to enjoy the audio source
connected to the MULTI CH INPUT jacks with
the video from the selected component.
•
When the MULTI CH IN is selected, the sound
field and surround parameters do not function.
MUTING
Press MUTING to mute the sound. MUTING
appears on the display when the sound is
muted. The muting function is canceled when
turning the power off, or disconnecting the
power cord.
PHONES
Use the PHONES jack to connect headphones.
•
When the headphones are connected, speaker
output is automatically cancelled.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Surround Sound
About DCS (Digital Cinema Sound)
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home. You can also
customize the sound fields to obtain the sound
you want by changing the various surround
parameters.
To fully enjoy surround sound, you must
register the number and location of you
speakers. See “Multi channel surround setup”
starting from page 13 to set the speaker
parameters before enjoying surround sound.
DCS is the concept name of the surround
technology for home theater developed by
Sony. DCS uses the DSP (Digital Signal
Processor) technology to reproduce the sound
characteristics of an actual cinema cutting
studio in Hollywood.
When played at home, DCS will create a
powerful theater effect that mimics the artistic
combination of sound and action as envisioned
by the movie director.
x NORM.SURR. (Normal Surround)
Software with multi channel surround audio
signals is played back according to the way it
was recorded. Software with 2 channel audio
signals is decoded with Dolby Pro Logic to
create surround effects.
Selecting a sound field
You can enjoy surround sound simply by
selecting one of the pre-programmed sound
fields according to the program you want to
listen to.
x STUDIO A–C (Cinema Studio A–C)
DCS
•
CINEMA STUDIO A reproduces the sound
characteristics of Sony Pictures Entertainment’s
classic editing studio.
Press SOUND FIELD +/– repeatedly to
select the sound field you want.
•
CINEMA STUDIO B reproduces the sound
characteristics of Sony Pictures Entertainment’s
mixing studio which is one of the most up-to-
date facilities in Hollywood.
The current sound field is indicated in the
display. See pages 19–20 for information on
each sound field.
•
CINEMA STUDIO C reproduces the sound
characteristics of Sony Pictures Entertainment’s
BGM recording studio.
To turn the surround effect off
Select A.F.D. or 2CH ST. (page 20).
Tips
• The receiver memorizes the last sound field selected
for each program source (Sound Field Link).
Whenever you select a program source, the sound
field that was last applied is automatically applied
again. For example, if you listen to DVD with
HALL as the sound field, change to a different
program source, then return to DVD, HALL will be
applied again.
continued
• You can identify the encoding format of program
software by looking at its packaging.
Dolby Digital discs are labeled with the
logo, and Dolby Surround encoded programs are
labeled with the
logo.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting a sound field (continued)
Use the buttons on the remote to operate the
following modes.
A.F.D. (AUTO FORMAT DECODING)
Automatically detects the type of audio signal
being input (Dolby Digital, DTS, or standard 2
channel stereo) and performs the proper
decoding if necessary. This mode presents the
sound as it was recorded/encoded, without
adding any effects (ex. reverberation).
x V.M.DIMENS.* (Virtual Multi Dimension)
DCS
Uses 3D sound imaging to create an array of
virtual surround speakers positioned higher
than the listener from a single pair of actual
surround speakers. This mode creates 4 sets of
virtual speakers surrounding the listener at
approximately a 30° angle of elevation.
2CH ST. (2 CHANNEL)
x V.SEMI M.D.* (Virtual Semi Multi
Outputs the sound from the front left and right
speakers only. Standard 2 channel (stereo)
sources completely bypass the sound field
processing. Multi channel surround formats are
downmixed to 2 channel.
Dimension) DCS
Uses 3D sound imaging to create virtual
surround speakers from the sound of the front
speakers without using actual surround
speakers. This mode creates 5 sets of virtual
speakers surrounding the listener at a 30° angle
of elevation.
Notes
• No sound is output from the sub woofer when you
select NORM. SP. (page 6) and “2CH ST.” is
selected. To listen to 2 channel (stereo) sources
using the front left and right speakers and a sub
woofer, select “A.F.D.”.
• When you select MICRO SP., internal sound
processor will automatically redirect bass sound to
subwoofer.
x HALL
Reproduces the acoustics of a rectangular
concert hall.
x JAZZ (Jazz Club)
Reproduces the acoustics of a jazz club.
x L.HOUSE (Live House)
Reproduces the acoustics of a 300-seat live
house.
x GAME
Obtains maximum audio impact from video
game software.
* “VIRTUAL” sound field: Sound field with virtual
speakers.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the multi channel surround displays
q; qa
1
2
3
4
SLEEP
PRO LOGIC DTS
STEREO/MONO
MEMORY
DIGITAL
a
D.RANGE
SP. OFF OPT COAX
SW
L
C
R
L F E
S
7
6
5
SL
SR
8
9
1 ; DIGITAL: Lights up when the receiver is
decoding signals recorded in the Dolby
Digital format.
8 Playback channel indicators: The letters
light up to indicate the channels being played
back.
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SW (Sub woofer)
2 PRO LOGIC: Lights up when the receiver
applies Pro Logic processing to 2 channel
signals in order to output the center and
surround channel signals. However, this
indicator does not light if the center and
surround speakers are set to “NO”, and
“A.F.D.” or “NORMAL SURROUND” is
selected.
The boxes around the letters light up to
indicate the speakers used to playback the
channels.
L F E
3 DTS: Lights up when DTS signals are input.
9
: Lights up when the disc being
played back contains the LFE (Low
Frequency Effect) channel and when the
sound of the LFE channel signal is actually
being reproduced.
4 Tuner indicators: Light up when using the
receiver to tune in radio stations, etc. See
pages 24–25 for tuner operations.
5 D.RANGE: Lights up when dynamic range
compression is activated. See page 23 to
adjust the dynamic range compression.
0 SLEEP: Lights up when sleep timer is
activated.
qa SP.OFF: Lights up when headphones are
6 COAX: Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal.
inserted.
7 OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial settings
Customizing sound fields
Parameter
Initial setting
BALANCE
BALANCE
CTR 0 dB
FRONT BALANCE*
SURR BALANCE*
CENTER LEVEL*
SURR LEVEL*
By adjusting the surround and level parameters
of the front, center, and surround speakers, you
can customize the sound fields to suit your
particular listening situation.
SURR 0 dB
S.W. 0 dB
Once you customize a sound field, the changes
are stored in the memory indefinitely (unless
the receiver is unplugged for about two weeks).
You can change a customized sound field any
time by making new adjustments to the
parameters.
SUB WOOFER LEVEL*
LFE MIX LEVEL
DYNAMIC RANGE COMP
L.F.E. 0 dB
COMP. OFF
* These parameters can be adjusted separately for
MULTI CH IN.
L
R
Front balance (
)
See the tables on page 32 for the parameters
available in each sound field.
Lets you adjust the balance between front left
and right speakers.
To get the most from multi
channel surround sound
SR
SL
Surround balance (
)
Lets you adjust the balance between surround
left and right speakers.
Position your speakers and do the procedures
described in “Multi channel surround setup”
starting from page 13 before you customize a
sound field.
C
Center level (
)
Lets you adjust the level of the center speaker.
SR
SL
Surround level (
)
Lets you adjust the level of the surround left
and right speakers.
Adjusting the level
parameters
SW
Sub woofer level (
)
The LEVEL menu contains parameters that let
you adjust the balance and volumes of each
speaker. The settings are applied to all sound
fields.
Lets you adjust the level of the sub woofer.
LFE
Low Frequency Effect (
)
Lets you attenuate the level of the LFE (Low
Frequency Effect) channel output from the sub
woofer without effecting the level of the bass
frequencies sent to the sub woofer from the
front, center or surround channels via the
Dolby Digital or DTS bass redirection
circuitry.
1 Start playing a program source
encoded with multi channel surround
sound.
2 Press LEVEL/SURR.
The button lights up and the first parameter
is displayed.
•
“0 dB” outputs the full LFE signal at the mix
3 Press the cursor buttons (U or u) to
select the parameter you want to
adjust.
level determined by the recording engineer.
•
To mute the sound of the LFE channel from the
sub woofer, select “OFF”. However, the low
frequency sounds of the front, center, or
surround speakers are output from the sub
woofer according to the settings made for each
speaker in the speaker setup (page 14–15).
4 Press + or – to select the setting you
want.
The setting is stored automatically.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Dynamic range compressor (
)
Initial settings
D. RANGE
Lets you compress the dynamic range of the
Parameter
Initial setting
sound track. This may be useful when you want
to watch movies at low volumes late at night.
We recommend using the “MAX” setting.
EFFECT LEVEL
WALL TYPE
(depends on the sound field)
WALL MID
REVERBERATION
TIME
REVB. MID
•
To reproduce the sound track with no
compression, select “COMP. OFF”.
•
To reproduce the sound track with the dynamic
range intended by the recording engineer, select
“COMP. STD”.
Effect level (EFFECT)
Lets you adjust the “presence” of the current
surround effect.
•
•
To compress the dynamic range in small steps
to achieve the sound you desire, select “COMP.
0.1”–“COMP. 0.9”.
Wall type (WALL)
Lets you control the level of the high
frequencies to alter the sonic character of your
listening environment by simulating a softer (S)
or harder (H) wall. The midpoint designates a
neutral wall (made of wood).
To reproduce a dramatic compression of the
dynamic range, select “COMP. MAX”.
Note
Dynamic range compression is possible with Dolby
Digital sources only.
Reverberation (REVERB)
Lets you control the spacing of the early
reflections to simulate a sonically longer (L) or
shorter (S) room. The midpoint designates a
standard room with no adjustment.
Adjusting the surround
parameters
The SURR menu contains parameters that let
you customize various aspects of the current
sound field. The settings are stored individually
for each sound field.
Resetting customized sound
fields to the factory settings
1 Start playing a program source
encoded with multi channel surround
sound.
1 If the power is on, press ?/1 to turn off
the power.
2 Hold down SOUND FIELD + and press
2 Press LEVEL/SURR.
The button lights up and the first parameter
is displayed.
?/1.
“S.F. CLR.” appears in the display and all
sound fields are reset at once.
3 Press the cursor buttons (U or u) to
select the parameter you want to
adjust.
4 Press + or – to select the setting you
want.
The setting is stored automatically.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving Broadcasts
Automatic memory
Before receiving broadcasts, make sure you
have connected FM and AM antennas to the
receiver (see page 6).
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area and preset the
stations to the receiver.
Manual memory
Press and hold MEMORY/ENTER, then
press ?/1.
“AUTO MEMORY START” appears in the
display.
You can enter a frequency of the station you
want directly by using the cursor buttons, and
preset the stations to the receiver.
1 Press TUNER FM/AM to select the FM
The receiver scans from low to high
frequencies of FM stations, then repeat
scanning of AM stations.
or AM band.
2 Press MEMORY/ENTER.
The receiver enters the Manual Memory
mode.
When a station is tuned in, the station is
automatically stored in the memory in the
following order.
The current frequency appears and the
preset number flashes in the display.
tA1tA2t...tA0tB1tB2t...tB0
Do steps 3 to 5 before “PUSH” and
“ENTER” flashes in the display.
C0T...C2TC1T
If all preset channels are memorized before
scanning all stations, scanning stops and
“MEM. FULL” appears in the display.
3 Press +/– to tune in a station.
If “PUSH” and “ENTER” flashes before
you tune in a station, start again from step 2.
To cancel
Press ?/1 during any step.
4 Press the cursor buttons (U or u) to
select a preset number.
If “PUSH” and “ENTER” flashes before
you select the preset number, start again
from step 2.
5 Press MEMORY/ENTER.
6 Repeat steps 2 to 5 to preset another
station.
Tip
When the FM station is tuned in, you can press
TUNER to switch the MONO mode to STEREO
mode manually.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning to preset stations
Automatic tuning
After preseting radio stations, you can tune in
any of them directly by entering its
2-character preset code using the supplied
remote. Up to 30 FM or AM stations can be
preset. The receiver will also scan all the
stations that you have preset.
If you don’t know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
1 Press TUNER FM/AM to select the FM
or AM band.
The last received station is tuned in.
You can tune the preset stations by either of the
following two ways.
2 Press + or –.
Press + to scan from low to high; press – to
scan from high to low.
Scanning the preset stations
1 Press TUNER.
2 Press the cursor buttons (U or u)
repeatedly to select the preset station
you want.
The receiver stops scanning whenever a
station is received.
When the receiver reaches either end of
the band
Each time you press the button, the receiver
tunes in one preset station at a time, in the
corresponding order and direction as
follows:
Scanning is repeated in the same direction.
3 To continue scanning, press + or –
again.
Tips
tA1yA2y...yA0yB1yB2y...yB0T
• If you press + or – during Automatic Tuning,
Automatic Tuning stops.
• If you press + or – within a second after the
Automatic Tuning stops, the frequency changes by
a single step.
tC0y...C2yC1T
Using the preset codes
Use the supplied remote to perform the
following operations. For details on the buttons
used in this section, see pages 33–34.
Direct tuning
1 Press TUNER.
You can enter a frequency of the station you
want directly by using the numeric buttons on
the supplied remote.
The last received station is tuned in.
2 Press SHIFT to select a memory page
(A, B, or C), then press the preset
number of the station you want using
the numeric buttons.
1 Press TUNER on the remote.
2 Press FM/AM to select the FM or AM
band.
3 Press D.TUNING.
4 Press the numeric buttons to enter the
frequency.
If you cannot tune in a station and
the entered numbers flash
Make sure you’ve entered the right frequency.
If not, repeat steps 3 and 4. If the entered
numbers still flash, the frequency is not used in
your area.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
Adjustments using the
SET UP button
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
The SET UP button allows you to make the
following adjustments.
Press SLEEP on the remote while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
1 Press SET UP.
2 Press the cursor buttons (U or u) to
select the parameter you want to
adjust.
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When you select MULTI VI. or TUNER
VI., M[XXX] or T[XXX] appears in the
display after about 2 seconds.
The display dims after you have specified the
time.
3 Press + or – to select the setting you
Tips
want.
• You can freely specify the time. After pressing
SLEEP, specify the time you want using the cursor
buttons (U or u) on the receiver. The sleep timer
can be set with an interval of 1 minute between
1 minute and 5 hours, and with an interval of
1 second for less than 1 minute.
• To check the remaining time before the receiver
turns off, press SLEEP. The remaining time
appears in the display.
The setting is stored automatically.
4 Repeat steps 2 to 3 until you have set
all of the parameters that follow.
Initial settings
Parameter
MULTI VI.
TUNER VI.
Initial setting
DVD
OFF
x MULTI CH IN visual select
Lets you specify the video input to be used
with the audio signals from the MULTI CH
INPUT jacks.
x TUNER visual select
Lets you specify the video input to be used
with the built-in tuner.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
Precautions
On cleaning
On safety
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
On power sources
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
• Before operating the unit, check that the operating
voltage is identical with your local power supply.
The operating voltage is indicated on the nameplate
at the rear of the receiver.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
• If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the
wall outlet. To disconnect the AC power cord,
grasp the plug itself; never pull the cord.
• AC power cord must be changed only at the
qualified service shop.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem. Also, see “Checking the connections”
on page 18 to verify that the connections are
correct. Should any problem persist, consult
your nearest Sony dealer.
On heat buildup
Although the unit heats up during operation, this is
not a malfunction. If you continuously use this unit at
a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
There is no sound no matter which component
is selected.
• Check that both the receiver and all components
are turned on.
On placement
• Check that the MASTER VOLUME control is
not set at “MIN”.
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Check that all speaker cords are connected
correctly.
• Press MUTING to cancel the muting function.
• Check that the headphones are not connected to
the PHONES jack. No sound will come from the
speakers if the headphones are connected.
• Check that the receiver is not in “Demonstration
Mode” (see page 2).
There is no sound from a specific component.
• Check that the component is connected correctly
to the audio input jacks for that component.
• Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (continued)
There is no sound from the center speaker.
• Make sure the sound field function is on (press
SOUND FIELD +/–).
There is no sound from one of the front
speakers.
• Select a sound field containing the word
“CINEMA” or “VIRTUAL” (see page 19–20).
• Connect a pair of headphones to the PHONES
jack to verify that sound is output from the
headphones (see page 18).
• Adjust the speaker level (see page 17).
• Make sure the center speaker size parameter is
set to either “SMALL” or “LARGE” (see page
16).
If only one channel is output from the
headphones, the component may not be
connected to the receiver correctly. Check that
all the cords are fully inserted into the jacks on
both the receiver and the component.
There is no sound or only a very low-level sound
is heard from the surround speakers.
• Make sure the sound field function is on (press
SOUND FIELD +/–).
If both channels are output from the headphones,
the front speaker may not be connected to the
receiver correctly. Check the connection of the
front speaker which is not outputting any sound.
• Select a sound field containing the word
“CINEMA” or “VIRTUAL” (see page 19–20).
• Adjust the speaker level (see page 17).
• Make sure the surround speaker size parameter is
set to either “SMALL” or “LARGE” (see page
15).
There is no sound or only a very low-level sound
is heard.
• Check that the speakers and components are
connected securely.
There is no sound from the active sub woofer.
• Check that you have selected the correct
• When you select NORM. SP., make sure the sub
component on the receiver.
woofer is set to “S.W. YES” (see page 15).
• Check that the headphones are not connected.
• Check that “2CH ST.” is not selected (see page
20).
• Press MUTING if muting function is activated.
• The Thermal Protection has been activated
because the receiver is overheated
(“OVERHEAT” flashes in the display). Turn off
the receiver, leave the receiver for a while, then
turn on the power again.
Radio stations cannot be tuned in.
• Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
Manual tuning.
• The Over Current Protection has been activated
because of low impedance or short circuit
(“PROTECT” flashes in the display). Turn off
the receiver, eliminate the short-circuit problem
and turn on the power again after about
20 seconds.
• No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations (see
page 24).
The left and right sounds are unbalanced or
reversed.
“PCM--kHz” appears on the display.
• The sampling frequency is more than 48 kHz.
Change the input player setting to 48 kHz.
• Check that the speakers and components are
connected correctly and securely.
• Adjust balance parameters in the LEVEL menu.
The surround effect cannot be obtained.
• Make sure the sound field function is on (press
SOUND FIELD +/–).
There is severe hum or noise.
• Check that the speakers and components are
connected securely.
There is no picture or an unclear picture appears
on the TV screen or monitor.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
• Select the appropriate function on the receiver.
• Set your TV to the appropriate input mode.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs (Analog)
Sensitivity: 250 mV
Impedance: 50 kilohms
S/N2): 95 dB
The remote does not function.
• Point the remote at the remote sensor on the
receiver.
(A, 20 kHz LPF,
250 mV3))
• Remove any obstacles in the path between the
remote and the receiver.
2) INPUT SHORT.
3) Weighted network, input level.
Inputs (Digital)
• Replace both batteries in the remote with new
ones, if they are weak.
• Make sure you select the correct function on the
remote.
DVD (Coaxial)
TV, AUX (Optical)
Outputs
Sensitivity: –
Impedance: 75 ohms
S/N: 95 dB
(A, 20 kHz LPF)
• If the remote is set to operate the TV only, use
the remote to select a source or component other
than TV before operating the receiver or other
component.
Sensitivity: –
Impedance: –
S/N: 95 dB
(A, 20 kHz LPF)
Reference sections for clearing the
receiver’s memory
FRONT L/R, CENTER, SURROUND L/R,
SUB WOOFER
To clear
See
Voltage: 2 V
Impedance: 1 kilohms
All memorized settings
Customized sound fields
page 13
page 23
Video section
Inputs
S-video:
Y: 1 Vp-p, 75 ohms
Specifications
C: 0.286 Vp-p, 75 ohms
Outputs
S-video:
Y: 1 Vp-p, 75 ohms
AUDIO POWER SPECIFICATIONS:
C: 0.286 Vp-p, 75 ohms
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
FM tuner section
Tuning range
87.5 – 108.0 MHz
with 8 ohm loads both channels driven, from
120 Hz – 10 kHz; rates 100 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion from 250 milliwatts to
rated output.
Antenna terminals
75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Sensitivity
Mono: 18.3 dBf,
2.2 µV/75 ohms
Stereo: 38.3 dBf,
22.5 µV/75 ohms
Amplifier section
POWER OUTPUT
Rated Power Output at Stereo mode
(8 ohms 1 kHz, THD 0.09 %)
80 W + 80 W
Usable sensitivity
S/N
11.2 dBf, 1 µV/75 ohms
Mono: 76 dB
Stereo: 70 dB
Reference Power Output
(THD 0.3%)
Front1): 80 W/ch
Center1): 80 W
Harmonic distortion at 1 kHz
Mono: 0.3%
Surround1): 80 W/ch
Stereo: 0.5%
1) Depending on the sound field settings and the
source, there may be no sound output.
Separation
45 dB at 1 kHz
Frequency response
MICRO SP.:
Frequency response 30 Hz – 15 kHz
150 Hz – 20 kHz
0/–3 dB
+0.5/–2 dB
150 Hz (6 dB/oct)
Low cut Filter ON
Selectivity
60 dB at 400 kHz
NORMAL SP.:
20 Hz – 20 kHz
+/–0.5 dB
continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (continued)
AM tuner section
Tuning range
With 10-kHz tuning
scale: 530 – 1710 kHz4)
With 9-kHz tuning
scale: 531 – 1710 kHz4)
Antenna
Loop antenna
Intermediate frequency
450 kHz
Usable sensitivity
S/N
50 dB/m (at 1,000 kHz or
999 kHz)
54 dB (at 50mV/m)
Harmonic distortion 0.5% (50mV/m, 400 Hz)
Selectivity
At 9 kHz: 35 dB
At 10 kHz: 40 dB
4) You can change the AM tuning scale to 9 kHz y
10 kHz. After tuning in any AM station, turn off
the receiver. Hold down the + button and press the
?/1 button. All preset stations will be erased when
you change the tuning scale. To reset the scale to
10 kHz (or 9 kHz), repeat the procedure.
General
Power requirements 120 V AC, 60 Hz
Power consumption 98 W
Dimensions (w/h/d)
430 × 83 × 289 mm
including projecting parts
and controls
Mass (Approx.)
3.1 kg
Supplied accessories
Remote commander RM-U305S (1)
R6 (size-AA) batteries (2)
Coaxial digital cord (1)
Design and specifications are subject to change
without notice.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Tables of settings using LEVEL/SURR and SET UP buttons
You can make various settings using the LEVEL/SURR, SET UP buttons, cursor buttons, and +/–
buttons. The tables below show each of the settings that these buttons can make.
Press
Press U or u to select
Turn jog dial to select
Page
LEVEL/SURR FRONT BALANCE
SURR BALANCE
–8 to +8 (1 increment steps)
–8 to +8 (1 increment steps)
–10 dB to +6 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
–10 dB to +6 dB (1 dB steps)
OFF, –20 dB to 0 dB (1 dB steps)
OFF, 0.1 to 0.9 (0.1 steps), STD, MAX
depends on the sound field (16 steps)
S (–8 to +8), MID, H (–8 to +8) (1 increment steps)
S (–8 to +8), MID, L (–8 to +8) (1 increment steps)
LARGE, SMALL
22
CENTER LEVEL
SURR LEVEL
SUB WOOFER LEVEL
LFE MIX LEVEL
DYNAMIC RANGE COMP
EFFECT LEVEL
23
14
WALL TYPE
REVERBERATION TYPE
L
R
SET UP
(FRONT)
C
(CENTER)
LARGE, SMALL, NO
SR
SL
SW
L
(SURR)
LARGE, SMALL, NO
(SUB WOOFER)
S.W. YES, S.W. NO
R
(FRONT) XX.X m
3 feet to 40 feet (1 foot steps)
3 feet to 40 feet (1 foot steps)
3 feet to 40 feet (1 foot steps)
PL. SIDE, PL. BEHD.
C
(CENTER) XX.X m
SR
SL
SL
SL
(SURR) XX.X m
SR
(SURR) PL. XXX
SR
(SURR) HGT. XXX
HGT. LOW, HGT. HIGH
MULTI VI.
TUNER VI.
TV, DVD, VIDEO, AUX, OFF
TV, DVD, VIDEO, AUX, OFF
26
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustable parameters for each sound field
The adjusted LEVEL parameters are applied to all the sound fields. The adjusted SURR parameters
are stored in each sound field.
<
LEVEL
>
FRONT
BAL.
SURR
BAL.
CENTER
LEVEL
SURR
LEVEL
SUB WOOFER LFE
D.RANGE
COMP.
LEVEL
MIX
z
z
z
z
z
z
z
z
z
z
z
z
2CH
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
A.F.D.
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
NORM.SURR.
STUDIO A
STUDIO B
STUDIO C
V.M.DIMENS.
V.SEMI M.D.
HALL
z
z
z
z
z
z
z
z
z
z
JAZZ
L.HOUSE
GAME
MULTI CH IN
<
SURR
>
EFFECT
LEVEL
WALL
TYPE
REVERB
TIME
2CH
A.F.D.
NORM.SURR.
STUDIO A
STUDIO B
STUDIO C
V.M.DIMENS.
V.SEMI M.D.
HALL
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
JAZZ
L.HOUSE
GAME
MULTI CH IN
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you use your remote
Remote button description
You can use the remote to operate the
components in your system. The tables below
show the settings of each button.
Inserting batteries into the
remote
Insert R6 (size-AA) batteries with the + and –
properly oriented in the battery compartment.
When using the remote, point it at the remote
sensor on the receiver.
Remote
Button
Operations
Function
SLEEP
Receiver
Activates the sleep
function and the duration
which the receiver turns
off automatically.
]
AV ?/1 TV/VCR/
Turns the audio and
CD player/
DVD player/ off.
video components on or
}
}
]
MD deck/
VCD player/
LD player/
DAT deck
Tip
?/1
Receiver
Turns the receiver on or
off.
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace all batteries with new ones.
VIDEO
DVD
TV
Receiver
Receiver
Receiver
To watch VCR.
To watch DVD.
Notes
To watch TV programs
or satellite receiver.
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you don’t use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
AUX
Receiver
Receiver
To listen to an audio
equipment.
TUNER
To listen to radio
programs.
MULTI CH Receiver
To listen to the sound
from MULTI CH INPUT
jacks.
0-9
Receiver
Use with “SHIFT” button
to select tuner preset
station numeric input
during DIRECT
TUNING or MEMORY
mode.
CD player/
MD deck/
VCD player/
LD player/
DAT deck
Selects track numbers.
0 selects track 10.
TV/VCR/SAT Selects channel numbers.
>10
CD player/
MD deck/
Tape deck/
LD player/
VCD player
Selects tracks numbers
over 10.
continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote button description
(continued)
Remote
Button
Operations
Function
X
CD player/
Pauses play or record.
Remote
Button
Operations
Function
MD deck/Tape (Also starts recording
deck/VCR/ with components in
DVD player/ record standby.)
VCD player/
LD player/
ENTER
TV/VCR/SAT/ After selecting a channel,
Tape deck/
LD player/
disc or track using the
numeric buttons, press
DAT deck
VCD player/ to enter the value.
MD deck/
DAT deck
x
CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
Stops play.
SHIFT
-/--
Receiver
Press repeatedly to select
a memory page for
presetting radio stations
or tuning to preset
stations.
DAT deck
POSITION* TV
Changes the position of
the small picture.
TV
Selects the channel entry
mode, either one or two
digit.
SWAP*
DISC
TV
Swaps the small and the
large picture.
D.TUNING Receiver
Tuner station direct key-
in mode.
CD player
Select discs (Mega
storage CD player only).
./> CD player/
MD deck/
Skips tracks.
SUB CH TV
+/–*
Selects preset channels
for the small picture.
DVD player/
LD player/
VCD player/
Tape deck/VCR/
DAT deck
D. SKIP/CH/ Receiver
PRESET +/–
Scans and selects preset
stations.
TV/VCR/SAT Selects preset channels.
CD player/
MD deck/
Skips discs (multi-disc
changer only).
m/M CD player/
Searches tracks
DVD player/ (forward or backward).
DVD player/
VCD player
VCD player/
MD deck/
LD player
DISPLAY TV/VCR/
LD player/
Selects information
displayed on the TV
Tape deck/
VCR/
DAT deck
Fastforwards or rewinds.
rewinds.
Searches tracks when
pressed during playback.
DVD player/ screen.
VCD player
P IN P*
JUMP
TV
Activates the picture-in-
picture function.
n
N
Tape deck
Starts play on the reverse
side.
TV
TV
Toggles between the
previous and the current
channels.
CD player/
MD deck/Tape
deck/VCR/
DVD player/
VCD player/
LD player/
Starts play.
WIDE
Selects the wide picture
mode.
DAT deck
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Button
Operations
Function
ANT
TV/VTR
VCR
Selects output signal
from the aerial terminal:
TV signal or VCR
program.
TV/VIDEO TV
Selects the input of TV.
Select the band.
FM/AM
A.F.D.
Receiver
Receiver
Auto Format Decoding.
2CH/OFF Receiver
Turns off sound field or
selects 2CH mode.
MODE +/– Receiver
Selects sound field mode.
MUTING Receiver
Mutes the sound from the
receiver.
TEST
TONE
Receiver
Receiver
Press to output test tone.
MAIN
MENU
Selects the set up mode
of the receiver.
MASTER Receiver
Adjusts the master
VOL +/–
volume of the receiver.
MENU </> Receiver
Selects a menu item.
MENU +/– Receiver
Makes adjustment or
change the setting.
MENU
DVD player
Displays DVD menu.
Selects a menu item.
Enters the selection.
F/f/G/g DVD player
ENTER
DVD player
RETURN DVD player
Returns to the previous
menu or exits the menu.
TITLE
DVD player
Displays DVD title.
* Only for Sony TVs with the picture-in-picture
function.
Notes
• Some functions explained in this section may not
work depending on the model of the receiver.
• The above explanation is intended to serve as an
example only.
Therefore, depending on the component the above
operation may not be possible or may operate
differently than described.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Hold down the Function button whose
function you want to change (for
example, DVD).
Changing the factory
setting of a function button
2 Press the corresponding button of the
component you want to assign to the
Function button (for example, 4 – Tape
deck).
If the factory settings of the function buttons do
not match your system components, you can
change them. For example, if you have an MD
player and a tape deck and you do not have a
DVD player, you can assign the DVD button to
your tape deck.
The following buttons are assigned to select
the functions:
To operate
Press
CD player
1
Note that the settings of the TUNER button
cannot be changed.
DAT deck
2
MD deck
3
AV ?/1
AV
?/1
Tape deck A
4
?/1
SLEEP
?/1
Tape deck B
5
SYSTEM
STANDBY
LD player
6
VIDEO
AUX
DVD
TV
Function
buttons
VCR (command mode VTR 1*)
VCR (command mode VTR 2*)
VCR (command mode VTR 3*)
TV
7
TUNER MULTI CH
8
9
F
MENU
1
4
7
2
5
8
0
3
6
9
g
G
ENTER
Numeric
buttons
0
f
TITLE
DSS (Digital Satellite Receiver)
DVD player
>10
ENTER
.
SHIFT
RETURN
ENTER
>10
>10
ENTER
–
/–
–
D.TUNING
POSITION
SWAP
=
=
+
VCD player
D.SKIP/
CH/PRESET
–
SUB CH
+
)
0
ANT
DISPLAY
P IN P
TV/VTR
* Sony VCRs are operated with a VTR 1, 2 or 3
setting. These correspond to Beta, 8mm and
VHS respectively.
9
(
DISC
TV/
JUMP
WIDE
VIDEO
P
p
SOUND FIELD
A.F.D.
2CH/OFF
FM/AM
MUTING
+
–
MODE
Now you can use the DVD button to control
the tape deck.
MASTER
VOL
TEST TONE MAIN MENU
MENU
To reset a button to its factory
setting
MASTER VOL –
RM-U305S
g
Repeat the above procedure.
To reset all the function buttons to
their factory setting
AV SYSTEM
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
Sony Corporation
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|