2-598-516-13(1)
FM Stereo
FM/AM Receiver
Operating Instructions
STR-DB798
©2005 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Settings
1: Check how to hookup your
components.......................................4
1a: Connecting components with
only analog audio jacks............11
2: Connecting the antennas ...................13
4: Connecting the AC power cord ........16
6: Adjusting the speaker levels and
Assigning the component video
digital components ......................... 37
Advanced settings................................. 40
Other Operations
Changing the command mode of the
Amplifier Operation
Listening to multi channel sound..........23
— MULTI CH IN
Storing FM stations automatically........24
— AUTOBETICAL
Before you use your remote.................. 48
Selecting the command mode of the
(Models of area code CEL, CEK
only)
Using the Radio Data System
(RDS)..............................................26
only)
Troubleshooting.................................... 58
Specifications........................................ 61
List of button locations and reference
pages............................................... 63
Index ....................................... Back cover
Enjoying Surround Sound
Using only the front speakers ...............30
— AUTO FORMAT DIRECT
Selecting a sound field..........................33
Selecting the surround back decoding
mode ...............................................35
— SURR BACK DECODING
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
1: Check how to hookup your components
Steps 1a through 1c beginning on page 6 describe how to hook up your components to this receiver.
Before you begin, refer to “Connectable components” below for the pages which describe how to
connect each component.
After hooking up all your components, proceed to “2: Connecting the antennas” (page 13).
Connectable components
Component to be connected
DVD player
Page
a)
With digital audio output
6–7
b)
With multi channel audio output
9–10
6–7
c)
With analog audio output only
TV monitor
With component video input
With S-Video or composite video input only
Satellite tuner
With digital audio output
With analog audio output only
Super Audio CD/CD player
With digital audio output
d)
7 or 10
12
a)
6–7
6–7
c)
a)
8
b)
With multi channel audio output
9
c)
With analog audio output only
11
MD/Tape deck
With digital audio output
With analog audio output only
Analog disc turntable
a)
8
c)
11
11
9
Multi channel decoder
VCR
12
Video game player
a)
With digital audio output
With analog audio output only
6–7
6–7
c)
a)
b)
Model with a DIGITAL OPTICAL OUTPUT or DIGITAL COAXIAL OUTPUT jack, etc.
Model with a MULTI CH OUTPUT jacks, etc. This connection is used to output the audio decoded by the
component’s internal multi-channel decoder through this receiver.
c)
d)
Model equipped only with AUDIO OUT L/R jacks, etc.
Model with component video (Y, PB/CB/B-Y, PR/CR/R-Y) input jacks.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Required cords
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (A to H) (not supplied).
A Audio cord
F Coaxial digital cord
White (L)
Red (R)
G Monaural audio cord
Black
B Audio/video cord
Yellow (video)
White (L/audio)
Red (R/audio)
Tip
Audio cord A can be torn into two monaural audio
cords G.
C Video cord
Yellow
H Component video cord
Green
Blue
D S-video cord
Red
E Optical digital cord
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the
components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Hooking up a DVD player, TV monitor, satellite tuner or video
game player
For details on the required cords (A–H), see page 5.
1 Connect the audio jacks.
DVD player
OUTPUT
AUDIO
OUT
OUTPUT
L
OUTPUT
DIGITAL
OPTICAL
DIGITAL
COAXIAL
R
*
*
F
E
A
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
To the VIDEO 3
INPUT jacks
(Front panel)
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
SPEAKERS
A,
E
E
A
OUTPUT
DIGITAL
OPTICAL
OUTPUT
AUDIO
OUT
L
R
Video game
player
Satellite tuner
* Connect to either the COAXIAL DVD IN or the OPTICAL DVD IN jack. We recommend making connections to
the COAXIAL DVD IN jack.
Note
You can also listen to the sound of your TV by connecting your TV’s audio output jacks to the TV/SAT AUDIO IN
jacks on the receiver. In this case, do not connect the TV’s video output jack to the TV/SAT VIDEO IN jack on the
receiver.
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect the video jacks.
The following illustration shows how to connect a TV or satellite tuner and a DVD player with
COMPONENT VIDEO (Y, PB/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component
video input jacks allows you to enjoy higher quality video.
Satellite tuner
TV monitor
OUTPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
OUTPUT
VIDEO
OUTPUT
VIDEO
INPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
INPUT
VIDEO
INPUT
VIDEO
S
S
P
P
Y
P
P
Y
H
C
D
H
C
D
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
To the VIDEO 3
INPUT jacks
(Front panel)
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
S-VIDEO
ANTENNA
AUDIO
VIDEO
SPEAKERS
C,
D
H
C
D
OUTPUT
OUTPUT
VIDEO
OUTPUT
COMPONENT
S
VIDEO
P
R/CR/R–Y
P
B/CB/B–Y
Y
Video game
player
DVD player
Tips
• When using the S-video jacks instead of the video jacks, your monitor must also be connected via an S-video jack.
S-video signals are on a separate bus from the video signals and will not be output through the video jacks.
• On this receiver, standard video signals can be converted to S-video signals and this upconverted video signals can
only be output from the MONITOR S-VIDEO OUT jack.
continued
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up an MD/Tape deck or a Super Audio CD/CD player
For details on the required cords (A–H), see page 5.
MD/Tape deck
INPUT OUTPUT
LINE
LINE
DIGITAL
L
OPTICAL
IN
OUT
R
E
E
A
A
OUT
IN
OUT
IN
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
SPEAKERS
F
A
OUTPUT
OUTPUT
LINE
DIGITAL
COAXIAL
L
R
Super Audio CD/
CD player
Tip
All the digital audio jacks are compatible with 32 kHz, 44.1 kHz, 48 kHz and 96 kHz sampling frequencies.
Notes
• It is not possible to record analog signals to components connected to the MD/TAPE OUT, VIDEO 1 AUDIO OUT
or VIDEO 2 AUDIO OUT jacks if you make only digital connections. Likewise, you cannot record digital signals
if you make only analog connections. To record analog signals, make analog connections. To record digital signals,
make digital connections.
• The sound is not output when you play a Super Audio CD on the Super Audio CD player connected to the
SA-CD/CD COAXIAL IN jack on this receiver. Connect to the analog input jacks (SA-CD/CD IN jacks). Refer to
the operating instructions supplied with the Super Audio CD player.
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1b: Connecting components with multi channel output
jacks
1 Connect the audio jacks.
If your DVD or Super Audio CD player is equipped with multi channel output jacks, you can connect
it to this receiver’s MULTI CH IN jacks to enjoy the multi channel sound. Alternatively, the multi
channel input jacks can be used to connect an external multi channel decoder.
For details on the required cords (A–H), see page 5.
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
SPEAKERS
A
A
G
G
L
CENTER
R
SUB
FRONT SURROUND WOOFER
MULTI CH OUT
DVD player,
Super Audio CD player,
Multi channel decoder, etc.
Tip
This connection also allows you to enjoy software with multi channel audio recorded in formats other than the Dolby
Digital and DTS.
Note
When you make connections to the MULTI CH IN jacks, you will need to adjust the level of the speakers and sub
woofer using the controls on the connected component.
continued
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connect the video jacks.
The following illustration shows how to connect a DVD player with COMPONENT VIDEO (Y,
P
B/CB/B-Y, PR/CR/R-Y) output jacks. Connecting a TV with component video input jacks allows you
to enjoy higher quality video.
DVD player
TV monitor
OUTPUT
COMPONENT
R/CR/R–Y B/CB/B–Y
INPUT
OUTPUT
VIDEO
OUTPUT
INPUT
VIDEO
INPUT
VIDEO
COMPONENT
S
VIDEO
S
P
P
Y
PR/CR/R–Y
PB/CB/B–Y
Y
H
C
D
H
C
D
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
S-VIDEO
ANTENNA
AUDIO
VIDEO
SPEAKERS
Tips
• When using the S-video jacks instead of the video jacks, your monitor must also be connected via an S-video jack.
S-video signals are on a separate bus from the video signals and will not be output through the video jacks.
• On this receiver, standard video signals can be converted to S-video signals and this upconverted video signals can
only be output from the MONITOR S-VIDEO OUT jack.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up audio components
For details on the required cords (A–H), see page 5.
Turntable
A
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
SPEAKERS
OUT
IN
A
A
A
OUTPUT
LINE
INPUT OUTPUT
LINE LINE
L
L
R
R
Super Audio CD/
CD player
MD/Tape deck
Note
If your turntable has a ground wire, connect it to the U SIGNAL GROUND terminal.
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking up video components
If you connect your TV to the MONITOR jacks, you can watch the video from the selected input
(page 22). For details on the required cords (A–H), see page 5.
VCR
INPUT OUTPUT
VIDEO
IN
VIDEO
OUT
TV monitor
AUDIO AUDIO
IN
OUT
INPUT
VIDEO
INPUT
VIDEO
L
S
R
B
B
C
D
OUT
IN
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
Y
R
R
L
P
B/CB
MONITOR
OUT
IN
IN
/B−Y
PHONO
DVD
IN
PR/CR
IN
VIDEO
1
/R−Y
TV/
SAT
IN
MD/
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
L
TAPE
OUT
OUT
MD/
TAPE
IN
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
COAXIAL
DVD
IN
DVD
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
OUT
IN
IN
OUT
B
B
D
D
INPUT OUTPUT
INPUT
VIDEO
OUTPUT
VIDEO
S
S
VIDEO
IN
VIDEO
OUT
AUDIO
OUT
AUDIO
IN
L
R
VCR
Tips
• When using the S-video jacks instead of the video jacks, your monitor must also be connected via an S-video jack.
S-video signals are on a separate bus from the video signals and will not be output through the video jacks.
• On this receiver, standard video signals can be converted to S-video signals and this upconverted video signals can
only be output from the MONITOR S-VIDEO OUT jack.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting the antennas
Connect the supplied AM loop antenna and FM wire antenna.
AM loop antenna
(supplied)
FM wire antenna
(supplied)
DIGITAL
OPTICAL
COMPONENT VIDEO
SIGNAL
GROUND
R
L
L
L
Y
R
R
L
L
P
B/CB
/B−Y
SURR
MONITOR
OUT
IN
PHONO
DVD
IN
P
R/CR
/R−Y
IN
IN
VIDEO
1
TV/
SAT
IN
MD/
TAPE
R
TV/SAT IN
ASSIGNABLE
DVD IN
MONITOR
OUT
OUT
OUT
MD/
TAPE
IN
FRONT
B
IN
IN
OUT
IN
SA-CD/
CD
MD/
TAPE
OUT
R
R
L
L
VIDEO
2
AM
FRONT
SURR
COAXIAL
R
COAXIAL
DVD
IN
DVD
FRONT
A
R
L
SA-CD/
CD
IN
TV/
SAT
IN
R
L
SUB WOOFER CENTER
MULTI CH IN
AUDIO
VIDEO
VIDEO
S-VIDEO
ANTENNA
AUDIO
SPEAKERS
*
* The shape of the connector varies depending on the area code.
Notes
• To prevent noise pickup, keep the AM loop antenna away from the receiver and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
• Do not use the U SIGNAL GROUND terminal for grounding the receiver.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3: Connecting speakers
Connect your speakers to the receiver. This receiver allows you to use a 7.1 channel speaker system.
To fully enjoy theater-like multi channel surround sound requires five speakers (two front speakers, a
center speaker, and two surround speakers) and a sub woofer (5.1 channel).
You can enjoy high fidelity reproduction of DVD software recorded in the Surround EX format if you
connect one additional surround back speaker (6.1 channel) or two surround back speakers (7.1
channel) (see “Selecting the surround back decoding mode” on page 35).
Example of 7.1 channel speaker system configuration
Center speaker
Front speaker (Right)
Surround speaker
(Right)
Front speaker (Left)
Sub woofer
Surround speaker (Left)
Surround back speaker (Right)
Surround back speaker (Left)
Tips
• When you connect 6.1 channel speaker system, place the surround back speaker behind the listening position (see
“When placing only one surround back speaker” illustration on page 19).
• Since the sub woofer does not emit highly directional signals, you can place it wherever you want.
Speaker impedance
(Except for models of area code CEK)
To enjoy the best possible multi channel surround, connect speakers with a nominal impedance of 8
ohms or higher to the FRONT A or FRONT B, CENTER, SURR and SURR BACK terminals, and set
the IMPEDANCE SELECTOR to “8Ω”. Use the screwdriver to set the impedance selector to the
correct position. Refer to the operating instructions supplied with your speakers if you are not sure of
their impedance. (This information is often on the back of the speaker.)
Alternatively, you may connect speakers with nominal impedances between 4 and 8 ohms to any or all
of the speaker terminals. However, be sure to set the IMPEDANCE SELECTOR to “4Ω” if you
connect even one speaker with a nominal impedance between 4 and 8 ohms.
Note
Be sure to turn the power off before adjusting the IMPEDANCE SELECTOR.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Required cords
A Speaker cords (not supplied)
B Monaural audio cord (not supplied)
(+)
(–)
Black
Surround speaker
(Left)
Surround back
Surround back
speaker (Left)2)
Center speaker
speaker (Right)2)
E
e E
e E
e E
e
A
A
A
A
IMPEDANCE
SELECTOR3)
IMPEDANCE SELECTOR
R
L
L
L
R
L
SURR
BACK
SURR
8
4
~ AC IN
R
AC IN4)
FRONT
B
CENTER
R
FRONT
A
AUDIO OUT
SPEAKERS
SUB WOOFER
SPEAKERS
FRONT B1)
A
A
A
B
INPUT
AUDIO
IN
E
e E
e E
e
Surround speaker
(Right)
(Right)
Front speaker
(Left)
Sub woofer
1)
If you have an additional front speaker system, connect them to the SPEAKERS FRONT B terminals. You can
select the front speakers you want to use with SPEAKERS (OFF/A/B/A+B) button. For details, see “Selecting the
speaker system” (page 46).
2)
3)
4)
If you connect only one surround back speaker, connect it to the SPEAKERS SURR BACK L terminals.
Except for models of area code CEK.
Except for models of area code TW (Taiwan). For details, see “Connecting the AC power cord” on page 16.
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
(Models of area code TW (Taiwan)
only)
Connect the AC power cord to a wall outlet.
4: Connecting the AC
power cord
AC power cord*
IMPEDANCE SELECTOR
8
Connecting the AC power
cord
4
b
(Models of area code CEL, CEK only)
To a wall
outlet
Connect the supplied AC power cord to the AC
IN terminal on the receiver, then connect the AC
power cord to a wall outlet.
AC power cord
(supplied)
* The AC power cord for Taiwan model is non-
detachable.
Performing initial setup
operations
AC IN terminal
IMPEDANCE SELECTOR
8
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure.
~
AC IN
4
This procedure can also be used to return
settings you have made to their factory defaults.
Use the buttons on the receiver for the operation.
1
2
Press ?/1 to turn off the receiver.
Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears in the
display alternatingly.
3
Press MEMORY/ENTER.
“CLEARING” appears in the display for a
while, then “CLEARED” appears.
The following are reset to their factory
settings.
• All settings in the SPEAKER SETUP,
LEVEL, EQUALIZER, CUSTOMIZE
and TUNER menus.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME –/+ is set to
“–oodB” (volume minimum).
• INPUT SELECTOR is set to “DVD”.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SW
x
S.W. XXX (Sub woofer selection)
• YES
If you connect a sub woofer, select “YES”.
• NO
5: Setting up the speakers
You can use the SPEAKER SETUP menu to set
the size and distance of the speakers connected
to this system.
If you did not connect a sub woofer, select
“NO”. The front speakers are automatically
set to “LARGE” and you cannot change this
setting. This activates the bass redirection
circuitry and outputs the LFE signals from
other speakers.
1
2
Press ?/1 to turn on the system.
Press MAIN MENU repeatedly to select
“SP SETUP”.
3
Turn MENU to select the parameter you
want to adjust.
Note
In order to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend that you set
the cut off frequency on the sub woofer as high as
possible.
For details, see “SPEAKER SETUP menu
parameters” below.
Note
L
R
Some speaker setup items may appear dimmed in
the display. This means that they have been
adjusted automatically due to other speaker
settings or may not be adjustable.
x
XXXXX (Front speakers size)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
• SMALL
4
5
The setting is entered automatically.
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center, surround and surround
back speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
Note
Press MEMORY/ENTER if you select the setting
for “SP PAT. X –X”.
Repeat steps 3 and 4 until you have set
all of the items that follow.
SPEAKER SETUP menu
parameters
C
x
XXXXX (Center speaker size)
The initial setting is underlined.
• LARGE
x XXXX SET (Speaker easy setup)
If you connect a large speaker that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the center speaker
to “LARGE”.
• EASY
If you want to set up your speakers
automatically, select “EASY SET”. You can
select a pre-defined speaker pattern (see the
supplied “Easy Setup Guide”).
• NORM.
• SMALL
If you want to adjust the settings of each
speaker manually, select “NORM. SET”.
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the front
speakers (if set to “LARGE”) or sub woofer.
x SP PAT. X –X (Speaker setup pattern)
When you select “EASY SET”, select the
speaker setup pattern. Turn –/+ to select the
speaker setup pattern and press MEMORY/
ENTER to enter the selection. Check your
speaker pattern using the supplied “Easy Setup
Guide”.
continued
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SBL
SBR
SB
x
/
XXXXXX
(Surround back speaker selection)
• DUAL
If you connect two surround back speakers,
• NO
If you did not connect a center speaker, select
“NO”. The sound of the center channel will be
output from the front speakers (DIGITAL
DOWNMIX).
select “DUAL”. The sound will be output to a
maximum of 7.1 channels.
• MIX
If you did not connect a center speaker but
want to downmix the center channel audio,
select “MIX”.
This setting only available when the front
speakers are set to “LARGE” (ANALOG
DOWNMIX). In other cases, the center
channel will be downmixed digitally
(DIGITAL DOWNMIX).
• SINGLE
If you connect only one surround back
speaker, select “SINGLE”. The sound will be
output to a maximum of 6.1 channels.
• NO
If you did not connect surround back
speakers, select “NO”.
Note
Note
When the surround speakers size parameter is set to
“NO”, the surround back speakers selection parameter
is also automatically set to “NO”.
When using MULTI CH IN sources, the sound of the
center channel is output from the front speakers if you
select either “NO” or “MIX”.
Tip
SL
SR
x
XXXXX (Surround speakers size)
The “LARGE” and “SMALL” settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount of
directionality, it is best not to cut them, if possible.
Therefore, even when using small speakers, you can
set them to “LARGE” if you want to output the bass
frequencies from that speaker. On the other hand, if
you are using a large speaker, but prefer not to have
“SMALL”.
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies, select
“LARGE”. Normally, select “LARGE”.
However, if the front speakers are set to
“SMALL”, you cannot set the surround
speakers to “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other “LARGE” speakers.
• NO
If the overall sound level is lower than you prefer, set
all speakers to “LARGE”. If there is not enough bass,
you can use the BASS parameter in the EQUALIZER
menu to boost the bass levels. To adjust the equalizer,
see page 39.
If you did not connect surround speakers,
select “NO”.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
L
R
SL
SR
x
DIST. X.X m
(Front speaker distance)
x
DIST. X.X m
(Surround speaker distance)
Initial setting: 3.0 m
Initial setting: 3.0 m
Lets you set the distance from your listening position
to the front speakers (A). You can adjust from 1.0
meter to 7.0 meters in 0.1 meter steps.
If both front speakers are not placed an equal distance
from your listening position, set the distance to the
closest speaker.
Lets you set the distance from your listening position
to the surround speakers. Surround speaker distance
should be set from a distance equal to the front speaker
distance (A) to a distance 4.5 meters closer to your
listening position (C).
If both surround speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
When placing only one surround back speaker
SBL
SBR
SB
x
/
DIST. X.X m
B
(Surround back speaker distance)
A
A
Initial setting: 3.0 m
30˚ 30˚
Lets you set the distance from your listening position
to the surround back speaker. Surround back speaker
distance should be set from a distance equal to the front
speaker distance (A) to a distance 4.5 meters closer to
your listening position (D).
100˚-120˚
100˚-120˚
C
C
If you connect two surround back speakers and both
surround back speakers are not placed an equal
distance from your listening position, set the distance
to the closest speaker.
D
When placing two surround back speakers
Tip
(The angle E should be the same)
The receiver lets you to input the speaker position in
terms of distance. However, it is not possible to set the
center speaker further than the front speakers. Also, the
center speaker cannot be set more than 1.5 meters
closer than the front speakers.
B
A
A
30˚ 30˚
100˚-120˚
100˚-120˚
Likewise, the surround speakers cannot be set further
away from the listening position than the front
speakers. And they can be no more than 4.5 meters
closer.
C
C
E
E
D
E
This is because incorrect speaker placement is not
conducive to the enjoyment of surround sound.
Please note that, setting the speaker distance closer than
the actual location of the speakers will cause a delay in
the output of the sound from that speaker. In other
words, the speaker will sound like it is further away.
For example, setting the center speaker distance 1–2
meters closer than the actual speaker position will
create a fairly realistic sensation of being “inside” the
screen. If you cannot obtain a satisfactory surround
effect because the surround speakers are too close,
setting the surround speaker distance closer (shorter)
than the actual distance will create a larger sound stage.
Adjusting these parameter while listening to the sound
often results in much better surround sound. Give it a
try!
D
C
x
DIST. X.X m
(Center speaker distance)
Initial setting: 3.0 m
Lets you set the distance from your listening position
to the center speaker. Center speaker distance should
be set from a distance equal to the front speaker
distance (A) to a distance 1.5 meters closer to your
listening position (B).
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
For advanced speaker setups
6: Adjusting the speaker
levels and balance
— TEST TONE
Set “MENU XXX” in the CUSTOMIZE menu
to “MENU EXP.” (page 40). This enables
advanced setups including those of the heights
of the surround speakers, positioning of the
surround speakers and speaker crossover
frequency.
Adjust the speaker levels and balance while
listening the test tone from your listening
position.
For details on how to set the items, see page 41.
Use the remote for the operation.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
1
2
Press ?/1 to turn on the receiver.
Press TEST TONE.
“AUTO L” appears in the display. The test
tone is output from each speaker in
sequence and the display will automatically
change as follows:
AUTO L (Front left) t AUTO C (Center)
t AUTO R (Front right) t AUTO SR
(Surround right) t AUTO SBR (Surround
back right)* t AUTO SBL (Surround
back left)* t AUTO SL (Surround left)
t AUTO SW (Sub woofer)
* You will only hear the test tone from the
– surround back left and right speakers when
surround back speaker selection parameter is
set to “DUAL”.
– surround back left speaker when surround
back speaker selection parameter is set to
“SINGLE”. “AUTO SB” appears in the
display instead of “AUTO SBR” or “AUTO
SBL”.
3
using the LEVEL menu so that the level
of the test tone sounds the same from
each speaker.
For details on the LEVEL menu settings,
see page 38.
Tips
• The adjusted value are shown in the display
during adjustment.
• To adjust the level of all speakers at the same
time, press MASTER VOL +/– on the remote or
turn MASTER VOLUME –/+ on the receiver.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press TEST TONE again after
adjustment.
To output the test tone only from
a specific speaker
Set “T. TONE” in the LEVEL menu to “FIX”
(page 38). The test tone is output only from the
selected speaker.
For more precise adjustment
You can output the test tone or sound source
from two adjacent speakers to adjust their
balance and level.
Set “MENU XXX” in the CUSTOMIZE menu
to “MENU EXP.” (page 40). Then select the two
speakers you want to adjust using “P. NOISE”
or “P. AUDIO” in the LEVEL menu (page 43).
Notes
• The test tone cannot be used when ANALOG
DIRECT or MULTI CH IN function is used.
• Although these adjustments can also be made via the
front panel using the LEVEL menu (when the test
tone is output, the receiver switches to the LEVEL
menu automatically), we recommend you follow the
procedure described above and adjust the speaker
levels from your listening position using the remote.
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the headphones
Connect the headphones to the PHONES jack.
output is automatically canceled and “SP A”
and “SP B” do not light up in the display.
• When the headphones are connected, you can
select only the following sound fields
(page 34).
Amplifier Operation
Selecting the component
1
Turn INPUT SELECTOR to select the
input.
The selected input appears in the display.
– HP 2CH (HEADPHONE 2CH)
To select the
Display
– HP DIR (HEADPHONE DIRECT)
– HP MULTI (HEADPHONE MULTI)
– HP THEA (HEADPHONE THEATER)
VCR
VIDEO 1 or
VIDEO 2
Video game player
DVD player
VIDEO 3
DVD
Satellite tuner
TV/SAT
MD/TAPE
SA-CD/CD
MD or tape deck
Super Audio CD or CD
player
Built-in tuner (FM)
Built-in tuner (AM)
Turntable
FM and frequency
AM and frequency
PHONO
2
3
Turn on the component and start
playback.
Note
If you select any video components, set the TV’s
video input to match the component you selected.
Turn MASTER VOLUME –/+ to adjust
the volume.
Note
To avoid damaging your speakers, make sure that
you turn down the volume before you turn off the
receiver.
To mute the sound
Press MUTING on the remote.
The muting function will be canceled when you
do the following.
• Press MUTING on the remote again.
• Turn the power off.
• Increase the volume.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to multi channel
sound
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
antennas to the receiver (see page 13).
— MULTI CH IN
You can select the audio directly from the
components connected to the MULTI CH IN
jacks. This enables you to enjoy high quality
analog inputs like DVD or Super Audio CD.
Also see “D.PWR XXX” (page 41).
Tip
The tuning scale differs depending on the area code as
shown in the following table. For details on area codes,
see page 2.
When the MULTI CH IN function is selected,
the equalizer and sound field cannot be used.
Area code
FM
AM
CEL, CEK, TW
50 kHz
9 kHz
Press MULTI CH IN.
Press again to cancel the MULTI CH IN
function.
Automatic tuning
If you do not know the frequency of the station
you want, you can let the receiver scan all
available stations in your area.
When a center speaker or sub
woofer is not connected
If you have set the center speaker to “NO” or
“MIX”, or set the sub woofer to “NO” in the
SPEAKER SETUP menu (page 17), and you
activate the MULTI CH IN function, the analog
center or sub woofer audio will be output from
the front left and right speakers.
1
Turn INPUT SELECTOR to select FM or
AM band.
The last received station is tuned in.
2
Press TUNING + or TUNING –.
Press TUNING + to scan from low to high;
press TUNING – to scan from high to low.
The receiver stops scanning whenever a
station is received.
When MULTI CHANNEL
DECODING indicator lights up
In case of poor FM stereo
reception
The MULTI CHANNEL DECODING indicator
lights up when the receiver is decoding multi
channel sources.
However, this indicator does not light up if you
select 2CH STEREO mode.
If the FM stereo reception is poor and
“STEREO” flashes in the display, select
monaural audio so that the sound will be less
distorted.
1 Press MAIN MENU repeatedly to select
“TUNER”.
2 Turn MENU to select “FM AUTO”.
3 Turn –/+ to select “FM MONO”.
The FM reception switches to monaural.
Tip
You will not be able to enjoy the stereo effect, but the
sound will be less distorted. To return to stereo mode,
select “FM AUTO” in step 3.
continued
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct tuning
Storing FM stations
automatically
You can enter the frequency of the station you
want directly.
Use the remote for the operation.
— AUTOBETICAL
1
Press TUNER repeatedly to select FM
or AM band.
(Models of area code CEL, CEK only)
This function lets you store up to 30 FM and FM
RDS stations in alphabetical order without
redundancy. Additionally, it only stores the
stations with the clearest signals.
If you want to store FM or AM stations one by
one, see “Presetting radio stations” (page 25).
Use the buttons on the receiver for the operation.
The last received station is tuned in.
Tip
You can also use INPUT SELECTOR on the
receiver.
2
3
Press D.TUNING.
Press the numeric buttons to enter the
frequency.
Note
To avoid damaging your speakers, make sure that you
turn down the volume before you use the
AUTOBETICAL function.
Example 1: FM 102.50 MHz
Press 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
1
2
Press ?/1 to turn off the receiver.
Press 1 b 3 b 5 b 0
If you have tuned in an AM station, adjust
the direction of the AM loop antenna for
optimum reception.
Hold down MEMORY/ENTER and press
?/1 to turn the receiver back on.
“AUTO-BETICAL SELECT” appears in
the display and the receiver scans and stores
all the FM and FM RDS stations in the
broadcast area.
If you cannot tune in a station
and the entered numbers flash
Make sure you have entered the right frequency.
If not, repeat step 3. If the entered numbers still
flash, the frequency is not used in your area.
For RDS stations, the tuner first checks for
then stores only the one with the clearest
signal. The selected RDS stations are sorted
alphabetically by their Program Service
name, then assigned a 2-character preset
code. For more details on RDS, see
page 26.
Regular FM stations are assigned 2-
character preset codes and stored after the
RDS station.
When done, “FINISH” appears in the
display momentarily and the receiver
returns to the normal operation.
Notes
• Do not press any button on the receiver or supplied
remote during autobetical operation, except ?/1.
• If you move to another area, repeat this procedure to
store stations in your new area.
• For details on tuning the stored stations, see “Tuning
to preset stations” (page 25).
• If you move the antenna after storing stations with
this procedure, the stored settings may no longer be
valid. If this happens, repeat this procedure to store
the stations again.
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning to preset stations
Presetting radio stations
1
Turn INPUT SELECTOR to select FM or
AM band.
You can preset up to 30 FM or AM stations.
Then you can easily tune in the stations you
often listen to.
The last received station is tuned in.
2
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select the
preset station you want.
Presetting radio stations
Each time you press the button, you can
select the preset station as follows:
1
AM band.
tA1yA2y...yA0yB1yB2y...yB0T
The last received station is tuned in.
2
3
Tune in the station that you want to
preset using automatic tuning
(page 23) or direct tuning (page 24).
tC0y...yC2yC1T
Using the remote
Press MEMORY/ENTER.
1 Press TUNER repeatedly to select FM or
“MEMORY” indicator lights up in the
display for a few seconds. Do steps 4 to 5
before the indication turns off.
AM band.
2 Press PRESET/CH/D.SKIP +/– repeatedly
to select the preset station you want.
4
Press PRESET TUNING + or PRESET
TUNING – repeatedly to select a preset
station number.
To select the preset station
directly
Each time you press the button, you can
select the preset station number as follows:
Press the numeric buttons on the remote.
The preset station of the selected number in the
current memory page is tuned in. Press SHIFT
repeatedly on the remote to change the memory
page.
tC0y...yC2yC1T
If “MEMORY” indication turns off before
you select the preset station number, start
again from step 3.
Tip
You can also use the remote to select a preset
station number. Press SHIFT repeatedly to select
a memory page (A, B or C) and then press the
numeric buttons to select a preset number.
5
number.
If “MEMORY” indication turns off before
you press MEMORY/ENTER, start again
from step 3.
6
Repeat steps 2 to 5 to preset another
station.
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
Using the Radio Data
System (RDS)
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS service,
“NO XXXX” (such as “NO TEXT”) appears in the
display.
(Models of area code CEL, CEK only)
This receiver also allows you to use RDS (Radio
Data System), which enables radio stations to
send additional information along with the
regular program signal. You can also display
RDS information.
Description of program types
Notes
Program type
indication
Description
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do they
provide the same types of services. If you are not
familiar with the RDS services in your area, check
with your local radio stations for details.
NEWS
News programs
AFFAIRS
Topical programs that expand on
current news
INFO
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
Receiving RDS broadcasts
Simply select a station on the FM band
using automatic tuning (page 24), direct
tuning (page 23), or preset tuning
(page 25).
SPORT
Sports programs
EDUCATE
Educational programs, such as
“how-to” and advice programs
DRAMA
Radio plays and serials
When you tune in a station that provides RDS
services, the “RDS” indicator lights up and the
program service name appears in the display.
CULTURE
Programs about national or
regional culture, such as language
and social concerns
Note
SCIENCE
VARIED
Programs about the natural
sciences and technology
RDS may not work properly if the station you tuned to
is not transmitting the RDS signal properly or if the
signal strength is weak.
Other types of programs such as
celebrity interviews, panel games,
and comedy
POP M
Popular music programs
Rock music programs
Easy Listening
Displaying RDS information
ROCK M
EASY M
LIGHT M
While receiving an RDS station, press
DISPLAY repeatedly.
Instrumental, vocal, and choral
music
Each time you press DISPLAY, RDS
information on the display changes cyclically as
follows:
CLASSICS
OTHER M
Performances of major orchestras,
chamber music, opera, etc.
Program Service name t Frequency t
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
a)
Program Type indication t Radio Text
b)
indication t Current Time indication (in 24-
hour system) t Sound field currently applied
t Volume level
WEATHER
FINANCE
Weather information
Stock market reports and trading,
etc.
a)
Type of program being broadcast (see page 26).
b)
CHILDREN
SOCIAL
Programs for children
Text messages sent by the RDS station.
Programs about people and the
things that affect them
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Program type
indication
Description
Changing the display
RELIGION
PHONE IN
Programs of religious content
Programs where members of the
public express their views by
phone or in a public forum
Changing the information in
the display
TRAVEL
LEISURE
Programs about travel. Not for
announcements that are located by
TP/TA.
You can check the sound field etc. by changing
the information in the display.
Press DISPLAY repeatedly.
Programs on recreational
activities such as gardening,
fishing, cooking, etc.
Each time you press DISPLAY, the display will
change cyclically as follows:
*
JAZZ
Jazz programs
Index name of the input t Selected input t
COUNTRY
NATION M
Country music programs
Sound field currently applied t Volume level
Programs featuring the popular
music of the country or region
When the tuner is selected
**
Program Service name or index name of the
*
OLDIES
Programs featuring oldies music
Folk music programs
preset station t Frequency t Program Type
**
**
FOLK M
DOCUMENT
NONE
indication t Radio Text indication
t
Current Time indication (in 24-hour system)
t Sound field currently applied t
Volume level
Investigative features
Any programs not defined above
* Index name appears only when you have assigned
one to the input or preset station (page 44). Index
name does not appear when only blank spaces have
been entered, or it is the same as the input name.
**During RDS reception only. (Models of area code
CEL, CEK only. See page 26.)
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About the indications in the display
1
2
3
4
5
6
7
8
LFE
;
DIGITAL EX
;
NEO:6
D.RANGE EQ
SP A
PRO LOGIC IIx DTS-ES
96/24
RDS
STEREOMONO MEMORY
SW
SP B SLEEP OPT COAX
DIRECT
L
SL
C
R
S
SR
qf qd qs
qa q;
9
SBL
SBR
SB
qg
A SW: Lights up when sub woofer selection is
set to “YES” (page 17) and the audio signal is
output from the SUB WOOFER jack. This
indicator does not light up during the 2CH
STEREO mode.
E ; PRO LOGIC IIx: “; PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “; PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “; PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated. However, these
indicators do not light up if both the center and
surround speakers are set to “NO” and you
select a sound field using the A.F.D. button.
B LFE: Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C SP A/SP B: Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals and for signals with a
sampling frequency of more than 48 kHz.
D ; DIGITAL EX: “; DIGITAL” lights up
when the receiver is decoding signals recorded
in the Dolby Digital format.
F DTS-ES 96/24: “DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
“; DIGITAL EX” lights up when the
receiver is decoding signals recorded in the
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 37).
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 37).
G NEO:6: Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H Tuner indicators: Lights up when using the
receiver to tune in radio stations, etc. See
pages 23–27 for tuner operations.
Note
“RDS” lights up for models of area code CEL,
CEK only.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
I DIRECT: Lights up when the ANALOG
DIRECT function is activated.
J EQ: Lights up when the equalizer is activated.
K D.RANGE: Lights up when dynamic range
compression is activated (page 43).
digital signal being input through the
COAXIAL terminal (page 37).
M OPT: Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal (page 37).
N SLEEP: Lights up when sleep timer is
activated.
O Playback channel indicators: The letters
(L, C, R, etc.) indicate the channels being
played back. The boxes around the letters vary
to show how the receiver downmixes the
source sound (based on the speakers settings).
L (Front Left), R (Front Right), C (Center
(monaural)), SL (Surround Left), SR
(Surround Right), S (Surround (monaural or
the surround components obtained by Pro
Logic processing)), SB (Surround Back (the
surround back components obtained by 6.1
channel decoding)), SBL (Surround Back
Left), SBR (Surround Back Right)
Example:
Recording format (Front /Surround): 3/2
Output channel: When the surround speakers size
parameter is set to “NO”
Sound Field: A.F.D. AUTO
L
C
R
SL
SR
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to analog audio
(ANALOG DIRECT)
Enjoying Surround Sound
You can switch the audio of the selected input to
the two channel analog input. This function
enables you to enjoy high quality analog
sources. Also see “D.PWR XXX” on page 41.
When using this function, only the volume and
front speaker balance can be adjusted.
Using only the front
speakers
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
1
Turn INPUT SELECTOR to select the
input you want to listen to in analog
audio.
Listening to 2 channel stereo
sources (2CH STEREO)
2
Press DIRECT.
“A. DIRECT” appears in the display and
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
Press again to cancel the ANALOG DIRECT
function.
Notes
Press 2CH.
• This function is cancelled when you switch the sound
field (pages 30-34).
“2CH ST.” appears in the display and the
receiver switches to the 2CH STEREO mode.
• When this function is used, test tone function cannot
be used.
Note
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to the 2 channel stereo
sources using the front left/right speakers and a sub
woofer, set A.F.D. mode to “A.F.D. AUTO”.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Decoding the input audio
signal automatically
Enjoying higher fidelity
sound
In this mode, the receiver automatically detects
the type of audio signal being input (Dolby
Digital, DTS, standard 2 channel stereo, etc.)
and performs the proper decoding if necessary.
This mode presents the sound as it was recorded/
encoded, without adding any surround effects.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.) it will generate a low
frequency signal for output to the sub woofer.
— AUTO FORMAT DIRECT
The Auto Format Direct (A.F.D.) mode allows
you to select the decoding mode you want for
your audio sound.
A.F.D. mode
(Display)
Decoding mode
A.F.D. AUTO
As encoded
(A.F.D. AUTO)
Press A.F.D. repeatedly to select “A.F.D.
AUTO”.
PRO LOGIC
(DOLBY PL)
Dolby Pro Logic
The receiver automatically detects the type of
decoding if necessary.
PRO LOGIC II MOVIE Dolby Pro Logic II
(PLII MV)
PRO LOGIC II MUSIC
(PLII MS)
Tip
In most cases, “A.F.D. AUTO” provides the most
appropriate decoding. You may want to use SURR
BACK DECODING (page 35) to match the input
stream to the mode you prefer.
PRO LOGIC II GAME
(PLII GM)
PRO LOGIC IIx MOVIE Dolby Pro Logic IIx
(PLIIX MV)
PRO LOGIC IIx MUSIC
(PLIIX MS)
PRO LOGIC IIx GAME
(PLIIX GM)
Neo:6 Cinema
(NEO6 CIN)
DTS Neo:6
Neo:6 Music
(NEO6 MUS)
MULTI STEREO
(MULTI ST.)
continued
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x PLIIX GM (PRO LOGIC IIx GAME)
Enjoying stereo sound in multi
channel (2 channel decoding
mode)
Performs Dolby Pro Logic IIx Game mode decoding.
This setting delivers full-impact special effect signals
panned to the surround speakers.
Note
This mode lets you specify the type of decoding
for 2 channel audio sources. This receiver can
reproduce 2 channel sound in 5 channels
Dolby Pro Logic IIx decoding does not function for
DTS format signals and for signals with a sampling
frequency of more than 48 kHz.
through Dolby Pro Logic II; 7 channels through
Dolby Pro Logic IIx; 6 channels through DTS
Neo:6; or 4 channels through Dolby Pro Logic.
However, DTS 2CH sources are not decoded by
DTS Neo:6; they are output in 2 channels.
x NEO6 CIN (Neo:6 Cinema)
Performs DTS Neo:6 Cinema mode decoding.
x NEO6 MUS (Neo:6 Music)
Performs DTS Neo:6 Music mode decoding. This
setting is ideal for normal stereo sources such as CDs.
Press A.F.D. repeatedly to select the 2
channel decoding mode.
x MULTI ST. (MULTI STEREO)
The selected type of decoding appears in the
display.
Outputs the 2 channel left/right signals from all
speakers. The sound of speakers may not output
depending on the speakers settings.
x DOLBY PL (PRO LOGIC)
Performs Dolby Pro Logic decoding. The source
recorded in 2 channel is decoded into 4.1 channels.
If you connect a sub woofer
When the audio signal is 2 channel stereo or if
the source signal does not include a LFE signal,
the receiver generates a low frequency signal for
output to the sub woofer. However the low
frequency signal is not generated for “NEO6
CIN” or “NEO6 MUS” when all speakers are set
to “LARGE”.
x PLII MV (PRO LOGIC II MOVIE)
Performs Dolby Pro Logic II Movie mode decoding.
This setting is ideal for movies encoded in Dolby
Surround. In addition, this mode can reproduce sound
in 5.1 channel when watching videos of overdubbed or
old movies.
x PLII MS (PRO LOGIC II MUSIC)
Performs Dolby Pro Logic II Music mode decoding.
This setting is ideal for normal stereo sources such as
CDs.
x PLII GM (PRO LOGIC II GAME)
Performs Dolby Pro Logic II Game mode decoding.
This setting is ideal for video game softwares.
x PLIIX MV (PRO LOGIC IIx MOVIE)
Performs Dolby Pro Logic IIx Movie mode decoding.
This setting expands Dolby Pro Logic II Movie or
Dolby Digital 5.1 to discrete 7.1 movie channels.
x PLIIX MS (PRO LOGIC IIx MUSIC)
Performs Dolby Pro Logic IIx Music mode decoding.
This setting shares hard “back” effects across all
surround speakers.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x C.ST.EX B (CINEMA STUDIO EX B)
DCS
Selecting a sound field
Reproduces the sound characteristics of the Sony
Pictures Entertainment “Kim Novak Theater” cinema
production studio. This mode is ideal for watching
science-fiction or action movies with lots of sound
effects.
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
x C.ST.EX C (CINEMA STUDIO EX C)
DCS
Reproduces the sound characteristics of the Sony
Pictures Entertainment scoring stage. This mode is
ideal for watching musicals or films where orchestra
music is featured in the soundtrack.
Selecting a sound field for
movies
Press MOVIE repeatedly to select the
sound field you want.
x V. M. DIM (VIRTUAL MULTI DIMENSION)
DCS
The selected sound field appears in the display.
Creates 5 sets of virtual speakers from a single pair of
actual surround speakers.
Sound field
Display
CINEMA STUDIO EX A DCS
CINEMA STUDIO EX B DCS
CINEMA STUDIO EX C DCS
C.ST.EX A
C.ST.EX B
C.ST.EX C
V. M. DIM
About CINEMA STUDIO EX modes
CINEMA STUDIO EX modes are suitable for
watching motion picture DVDs (etc.), with
multi channel surround effects. You can
reproduce the sound characteristics of Sony
Pictures Entertainment’s dubbing studio in your
home.
VIRTUAL MULTI DIMENSION
DCS
About DCS (Digital Cinema
Sound)
The CINEMA STUDIO EX modes consist of
the following three elements.
Sound fields with DCS marks use DCS
technology.
• Virtual Multi Dimension
DCS is the concept name of the surround
technology for home theater developed by Sony.
DCS uses the DSP (Digital Signal Processor)
technology to reproduce the sound
characteristics of an actual cinema cutting studio
in Hollywood.
When played at home, DCS will create a
powerful theater effect that mimics the artistic
combination of sound and action as envisioned
by the movie director.
Creates 5 sets of virtual speakers from a single
pair of actual surround speakers.
• Screen Depth Matching
Creates the sensation that the sound is coming
from inside the screen like in theaters.
• Cinema Studio Reverberation
Reproduces the type of reverberation found in
theaters.
The CINEMA STUDIO EX modes integrate
these three elements simultaneously.
x C.ST.EX A (CINEMA STUDIO EX A)
Notes
DCS
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
Reproduces the sound characteristics of the Sony
Pictures Entertainment “Cary Grant Theater” cinema
production studio. This is a standard mode, great for
watching most any type of movies.
continued
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the surround effect
Selecting a sound field for
music
Press 2CH to select “2CH ST.” or press A.F.D.
repeatedly to select “A.F.D. AUTO”.
Press MUSIC repeatedly to select the
sound field you want.
Tip
You can identify the encoding format of DVD
software, etc. by looking at the logo on the package.
The selected sound field appears in the display.
–
–
–
: Dolby Digital discs
: Dolby Surround encoded programs
: DTS Digital Surround encoded programs
Sound field
HALL
Display
HALL
JAZZ CLUB
LIVE CONCERT
JAZZ
Notes
CONCERT
• Sound fields do not function for the signals with a
sampling frequency of more than 48 kHz.
• When one of the following sound fields are selected,
no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the SPEAKER
SETUP menu. However, the sound will be output
from the sub woofer if the digital input signal
contains LFE (Low Frequency Effect) signals, or if
the front, center, or surround speakers are set to
“SMALL”.
x HALL
Reproduces the acoustics of a classical concert hall.
x JAZZ (JAZZ CLUB)
Reproduces the acoustics of a jazz club.
x CONCERT (LIVE CONCERT)
Reproduces the acoustics of a 300-seat live house.
When the headphones are
connected
– HALL
– JAZZ CLUB
– LIVE CONCERT
You can select only from the following sound
fields.
x HP 2CH (HEADPHONE 2CH)
Outputs the sound in 2 channel (stereo). Standard 2
channel stereo sources completely bypass the sound
field processing and multi channel surround formats
are downmixed to 2 channels.
x HP DIR (HEADPHONE DIRECT)
Outputs the analog signals without processing by
equalizer, sound field, etc.
x HP MULTI (HEADPHONE MULTI)
Outputs the front analog signal from MULTI CH IN
jacks.
x HP THEA (HEADPHONE THEATER)
DCS
Allows you to experience a theater-like environment
while listening through a pair of headphones.
Note
If you connect a pair of headphones while a sound field
is operating, the system will automatically switch to
HEADPHONE 2CH if using a sound field selected
with the 2CH or A.F.D. button, or to HEADPHONE
THEATER if using a sound field selected with the
MOVIE or MUSIC button.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the surround
back decoding mode
— SURR BACK DECODING
This function lets you select the decoding mode
for the surround back signals of the multi
channel input stream.
By decoding the surround back signal of DVD
software (etc.) recorded in Dolby Digital EX,
DTS-ES Matrix, DTS-ES Discrete 6.1, etc.
format, you can enjoy the surround sound
intended by the filmmakers.
to select the surround back decoding
mode.
“SB XXXX” appears in the display.
For details, see “How to select the surround back
decoding mode” on page 36.
Tip
“SB XXXX” in the CUSTOMIZE menu (page 40).
Note
You can select the surround back decoding mode only
when A.F.D. mode is selected except for Dolby Pro
Logic IIx mode (page 31).
continued
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to select the surround back decoding mode
You can select the surround back decoding mode you want according to the input stream.
When you select “SB AUTO”
a)
When the input stream contains the 6.1 channel decode flag , the appropriate decoder is applied to
decode the surround back signal.
Input stream
Dolby Digital 5.1
Dolby Digital EX
DTS 5.1
Output channel
Applied surround back decoder
e)
5.1
—
b)
6.1
Matrix decoder conforms to Dolby Digital EX
—
e)
5.1
c)
e)
DTS-ES Matrix 6.1
6.1
DTS Matrix decoder
d)
e)
DTS-ES Discrete 6.1
6.1
DTS Discrete decoder
b)
Dolby Digital EX
7.1
Matrix decoder conforms to Dolby Pro Logic IIx
When you select “SB ON”
a)
To decode the surround back signal regardless of the 6.1 channel decode flag , Dolby Digital EX is
applied when the output channel is 6.1 and Dolby Digital EX or Dolby Pro Logic IIx is applied when
the output channel is 7.1.
Input stream
Dolby Digital 5.1
Dolby Digital EX
DTS 5.1
Output channel
Applied surround back decoder
6.1
6.1
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Digital EX
Matrix decoder conforms to Dolby Pro Logic IIx
Matrix decoder conforms to Dolby Pro Logic IIx
b)
e)
6.1
c)
e)
DTS-ES Matrix 6.1
6.1
d)
e)
DTS-ES Discrete 6.1
Dolby Digital 5.1
6.1
7.1
7.1
b)
Dolby Digital EX
When you select “SB OFF”
Surround back decoding is not performed.
a)
6.1 channel decode flag is the information recorded in software like DVDs.
b)
Dolby Digital DVD that includes a Surround EX flag. The Dolby Corporation web page can help you distinguish
Surround EX films.
c)
d)
Software encoded with a flag to denote it has both Surround EX and 5.1 channel signals.
Software encoded with both 5.1 channel signals and an extension stream designed for returning those signals to
6.1 discrete channels. Discrete 6.1 channel signals are DVD specific signals not used in movie theaters.
When two surround back speakers are connected, the output channel will be 7.1 channels.
e)
Note
There may be no sound from the surround back speaker in Dolby Digital EX mode. Some discs have no Dolby Digital
EX flag even though the packages have Dolby Digital EX logos. In this case, select “SB ON”.
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching the audio input
mode for digital
components
Advanced Adjustments and Settings
Assigning the component
video input
— INPUT MODE
— COMPONENT VIDEO INPUT
ASSIGN
You can switch the audio input mode for
components which have digital audio input
jacks.
You can assign a component video input for
another visual input.
1
2
Turn INPUT SELECTOR to select the
input.
1
Press MAIN MENU repeatedly to select
“CUSTOM”.
Press INPUT MODE repeatedly to
select the audio input mode.
2
3
4
Turn MENU to select “COMP. V. A.”.
Press MEMORY/ENTER.
The selected audio input mode appears in
the display.
Turn MENU to select the component
video input you want to assign.
Audio input modes
5
input jacks selected in step 4.
Gives priority to digital signals when there are both
digital and analog connections. If there are no digital
signals, analog is selected.
The input you can assign varies for each
component video input. For details, see
“Selectable visual inputs for each
component video input”.
x COAX IN (COAX FIXED)
Specifies the digital audio signals input to the
DIGITAL COAXIAL input jack.
Selectable visual inputs for each
component video input
x OPT IN (OPT FIXED)
Specifies the digital audio signals input to the
DIGITAL OPTICAL input jacks.
The initial setting is underlined.
x ANALOG (ANALOG FIXED)
(Assignable
Display
component video
inputs)
Selectable visual inputs
Specifies the analog audio signals input to the AUDIO
IN (L/R) jacks.
Notes
(DVD)
• When signals with a sampling frequency of more
than 48 kHz is input, the equalizer and sound field
cannot be used.
VIDEO 1
VIDEO 2
VIDEO 3
DVD
DVD- VD1
DVD- VD2
DVD- VD3
DVD- DVD
• Some audio input modes may be dimmed depending
on the input. This means that the selected input is
unavailable.
(TV/SAT)
VIDEO 1
VIDEO 2
VIDEO 3
TV/SAT
TV - VD1
TV - VD2
TV - VD3
TV - TV
Note
You cannot assign a visual input to more than one
component video input.
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
L
R
x
BAL. L/R XXX
(Front speaker balance)
Customizing sound fields
Initial setting: 0 (BALANCE)
Lets you adjust the balance between front left and right
speakers. You can adjust in the range of BAL. L (+1 to
+16), BALANCE (0), BAL. R (+1 to +16) in 33 steps.
By adjusting the LEVEL menu, you can
customize the sound fields to suit your particular
listening situation.
x CTR XXX.X dB
(Center speaker level)
Note on the displayed items
The setup items you can adjust in each menu vary
depending on the sound field. Certain setup parameters
may be dimmed in the display. This means that the
selected parameter is either unavailable or fixed and
unchangeable.
x SUR.L. XXX.X dB
(Surround speaker (left) level)
x SUR.R. XXX.X dB
(Surround speaker (right) level)
x SB XXX.X dB
(Surround back speaker level)*
Adjusting the LEVEL menu
parameters
x SBL XXX.X dB
(Surround back speaker (left) level)**
You can adjust the balance and level of each
speaker. These settings are applied to all sound
fields except for effect level parameter. The
effect level parameter settings are stored
individually for each sound field.
x SBR XXX.X dB
(Surround back speaker (right) level)**
x S.W. XXX.X dB
(Sub woofer level)
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
Initial setting: 0 dB
You can adjust from –20 dB to +10 dB in 0.5 dB steps.
2
3
Press MAIN MENU repeatedly to select
“LEVEL”.
* Only when the surround back speaker selection
parameter is set to “SINGLE” in the SPEAKER
SETUP menu (page 18).
Turn MENU to select the parameter you
want to adjust.
**Only when the surround back speaker selection
parameter is set to “DUAL” in the SPEAKER
SETUP menu (page 18).
For details, see “LEVEL menu parameters”
below.
MULTI CH IN
x
S.W. XXX dB
4
5
While monitoring the sound, turn –/+
to select the setting you want.
(Multi channel sub woofer level)
Initial setting: 0 dB
The setting is entered automatically.
Lets you increase the level of the MULTI CH IN sub
woofer channel by +10 dB. This adjustment may be
necessary when connecting a DVD player to the
MULTI CH IN jacks. The sub woofer level from DVD
player is 10 dB lower than Super Audio CD player.
Repeat steps 3 and 4 to adjust the other
parameters.
LEVEL menu parameters
x EFCT. XXX (Effect level)
x T. TONE (Test Tone)
Initial setting: STD
Initial setting: Off (T. TONE)
Lets you adjust the “presence” of the surround effect in
3 levels – MIN (minimum effect), STD (standard
effect) and MAX (maximum effect).
Lets you output the test tone sequentially from each
speaker. When set to “AUTO XXX”, the test tone is
output from each speaker automatically. When set to
“FIX XXX”, you can select which speaker will output
the test tone.
Note
This parameter is valid only when you use a sound
field selected with the MOVIE or MUSIC buttons.
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
For advanced LEVEL menu
adjustments
Adjusting the equalizer
Set “MENU XXX” in the CUSTOMIZE menu
to “MENU EXP.” (page 40). This enables
advanced setups including those of phase noise,
phase audio and dynamic range compressor.
For details on how to set the items, see page 43.
You can adjust the tonal quality (bass, treble
level) of the front speakers using the
EQUALIZER menu.
1
Start playing a source encoded with
multi channel surround effects (DVD,
etc.).
Resetting sound fields to the
initial settings
2
3
“E Q”.
Use the buttons on the receiver for the operation.
Turn MENU to select the parameter you
want to adjust.
1
2
Press ?/1 to turn off the power.
For details, see “EQUALIZER menu
parameters” below.
While holding down 2CH, press ?/1.
“SF. CLR.” appears in the display and all
sound fields are reset to the initial setting.
4
5
While monitoring the sound, turn –/+ to
select the setting you want.
The setting is entered automatically.
Repeat steps 3 and 4 to adjust the other
items.
Note
You cannot adjust the equalizer when the receiver is
decoding signals with a sampling frequency of more
than 48 kHz, or when DTS 96/24, DTS-ES Matrix or
DTS Neo:6 decoding is applied.
EQUALIZER menu parameters
x EQ XXX (Equalizer on/off)
Initial setting: OFF
Select “ON” to activate the equalizer.
Note
The “EQ” indicator lights up in the display when the
equalizer is turned on. When you adjust the equalizer
using the EQUALIZER menu parameters, the settings
are applied to all sound fields and can be reproduced
whenever you turn on the equalizer.
L
R
x
BASS XXX dB
(Front speaker bass level)
L
R
x
TREB. XXX dB
(Front speaker treble level)
Initial setting: 0 dB
You can adjust from –10 dB to +10 dB in 1 dB steps.
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x SB XXXX
(Surround back decoding mode)
Advanced settings
You can also press SURR BACK DECODING to
select the surround back decoding mode (page 35).
Using the CUSTOMIZE menu
to adjust the receiver
For details on each decoding mode, see page 36.
• OFF
• AUTO
• ON
You can adjust various receiver settings using
the CUSTOMIZE menu.
1
2
“CUSTOM”.
This parameter is valid only when A.F.D. mode is
selected except for Dolby Pro Logic IIx mode
(page 31).
Turn MENU to select the parameter you
want to adjust.
x S.F XXXX (Sound field link)
For details, see “CUSTOMIZE menu
parameters” below.
• LINK
Lets you apply the last selected sound field to an
input whenever it is selected. For example, if you
select HALL for the SA-CD/CD input, then change
to a different input and return to SA-CD/CD, HALL
will automatically be applied again.
• FIX
3
4
Turn –/+ to select the setting you want.
The setting is entered automatically.
Repeat steps 2 and 3 to adjust the other
items.
Sound field link is not activated.
CUSTOMIZE menu parameters
x A.V.SYNC.XX
(Time alignment)
The initial setting is underlined.
Initial setting: 0 (0 ms)
Let you delay the output of audio to adjust the gap
between video and audio. You can adjust from 0 (0 ms)
to 20 (200 ms) in 10 ms steps.
• EXP.
The advanced parameters for the SPEAKER SETUP
and LEVEL menus are displayed and can be
adjusted. For details on each setup item, see pages
17, 38 and the following pages.
x DEC. XXXX
(Digital audio input decoding priority)
• STD
Lets you specify the input mode for the digital signal
input to the DIGITAL IN jacks.
The advanced parameters for SPEAKER SETUP and
LEVEL menus are not displayed.
The initial setting is “DEC. AUTO” for VIDEO 3 and
TV/SAT, and “DEC. PCM” for DVD, MD/TAPE and
SA-CD/CD.
DTS 96/24
x
96 XXXX
(DTS 96/24 decoding mode)
• AUTO
• AUTO
Automatically switches the input mode between
DTS, Dolby Digital, or PCM.
When a DTS 96/24 signal is input, it is played back
at 96 kHz sampling frequencies.
• OFF
• PCM
PCM signals are given priority (to prevent the
interruption when playback starts). Even when other
signals are input, the sound is output. However, this
receiver cannot decode DTS-CD when set to “DEC.
PCM”.
Even when a DTS 96/24 signal is input, it is played
back at 48 kHz sampling frequencies.
Notes
• This parameter is valid only in A.F.D. mode
(page 31). In other sound fields, this parameter is
automatically set to “OFF”.
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for SA-CD/CD, etc.) is interrupted
when playback starts, set to “DEC. PCM”.
• Even when a DTS 96/24 signal is input, standard 48
kHz decoding is used if any speakers are set to
“SMALL” or if the sub woofer is set to “NO”.
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x D.PWR XXX
(Digital power management)
Advanced SPEAKER SETUP
menu parameters
• OFF
Lets you turn off the power of the unnecessary digital
circuits automatically when outputting the analog
audio signals using the ANALOG DIRECT or
MULTI CH IN function. You can enjoy high quality
analog audio without the influence of digital circuits.
• ON
When “MENU XXX” is set to “MENU EXP.”,
the following parameters are displayed and
adjustable in addition to the SPEAKER SETUP
menu parameters on page 17.
The initial setting is underlined.
Lets you keep the power of digital circuits on. Select
if you do not like the time lag that occurs with the
“D.PWR OFF” setting.
x DISTANCE (Distance unit)
Lets you select the unit of measure for setting
distances.
x DUAL XXX
• ft.
(Digital broadcast language selection)
The distance is displayed in feet.
• m
Lets you select the language you want to listen to
during digital broadcast. This feature only functions
for Dolby Digital sources.
The distance is displayed in meters.
SL
SR
x
PL. XXXX
(Surround speaker position)*
• M/S (Main/Sub)
Sound of the main language will be output through
the front left speaker and sound of the sub language
will be output through the front right speaker
simultaneously.
Lets you specify the location of your surround speakers
for proper implementation of the surround effects in
the Cinema Studio EX modes (page 33).
• M (Main)
Sound of the main language will be output.
• S (Sub)
Sound of the sub language will be output.
• M+S (Main + Sub)
120˚
100˚
Mixed sound of both the main and sub languages will
be output.
A
A
x COMP. V. A.
(Component video input assignment)
B
B
Lets you assign the component video input to another
visual input. For details, see “Assigning the component
video input” on page 37.
• SIDE
Select if the location of your surround speakers
x [DIMMER]
(Brightness of the display)
• BEHD
Lets you adjust the brightness of the display in 3 steps.
Select if the location of your surround speakers
corresponds to section B.
x NAME IN
(Naming preset stations and inputs)
* This setup item is not available when the surround
speaker size parameter is set to “NO”.
Lets you set the name of preset stations and inputs
selected with INPUT SELECTOR. For details, see
“Naming preset stations and inputs” on page 44.
continued
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
x SP > XXX Hz
Surround speaker position is designed specifically for
implementation of the Cinema Studio EX modes.
For other sound fields, speaker position is not so
critical. Those sound fields were designed under the
premise that the surround speakers would be located
behind the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects becomes unclear unless set to “PL.
SIDE”.
(Speaker crossover frequency)*
Initial setting: 100 Hz
Lets you adjust the bass crossover frequency of
speakers in SPEAKER SETUP menu. You can adjust
the bass crossover frequency from 40 Hz to 160 Hz in
10 Hz steps.
* This setup item is only available when at least one
speaker is set to “SMALL” and the corresponding
speaker segment flashes in the display.
Nevertheless, each listening environment has many
variables, like wall reflections, and you may obtain
better results using “PL. BEHD” if your speakers are
located high above the listening position, even if they
are to the immediate left and right.
Therefore, although it may result in a setting contrary
to the above explanation, we recommend that you
playback multi channel surround encoded software and
select the setting that provides a good sense of
spaciousness and that best succeeds in forming a
cohesive space between the surround sound from the
surround speakers and the sound of the front speakers.
If you are not sure which sounds best, select “PL.
BEHD” and then use the speaker distance parameter
SL
SR
x
HGT. XXXX
(Surround speaker height)*
Lets you specify the height of your surround speakers
for proper implementation of the surround effects of
the Cinema Studio EX modes (page 33).
B
A
B
A
60
30
• LOW
Select if the height of your surround speakers
corresponds to section A.
• HIGH
Select if the height of your surround speakers
corresponds to section B.
* This setup item is not available when the surround
speaker size parameter is set to “NO”.
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced LEVEL menu
parameters
When “MENU XXX” is set to “MENU EXP.”,
the following parameters are displayed and
adjustable in addition to the LEVEL menu
parameters on page 38.
The initial setting is underlined.
x P. NOISE (Phase noise)
Initial setting: Off
Lets you output the test tone sequentially from two
adjacent speakers.
x P. AUDIO (Phase audio)
Initial setting: Off
Lets you output the front 2 channel source sound
(instead of the test tone) sequentially from adjacent
speakers.
D.RANGE
x
COMP. XXX
(Dynamic range compressor)
Lets you compress the dynamic range of the sound
track. This may be useful when you want to watch
movies at low volumes late at night.
• OFF
The dynamic range is not compressed.
• STD
The dynamic range is compressed as intended by the
recording engineer.
• MAX
The dynamic range is compressed dramatically.
Tip
Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the dynamic
range information included in the Dolby Digital signal.
“COMP. STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the “COMP. MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
Note
Dynamic range compression is possible with Dolby
Digital sources only.
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note (Models of area code CEL, CEK only)
When you name an RDS station and tune in the station,
the Program Service name appears instead of the name
you entered. (You cannot change the name of a
Program Service name. The name you entered will be
overwritten by the Program Service name.)
Other Operations
Naming preset stations
and inputs
You can enter a name of up to 8 characters for
preset stations and inputs selected with INPUT
SELECTOR, and display it in the receiver’s
display.
Use the buttons on the receiver for the operation.
1 To index a preset station
Turn INPUT SELECTOR to select the
FM or AM band, then tune in the preset
station you want to create an index
name for (page 25). Then, press MAIN
MENU repeatedly to select “TUNER”.
To index an input
Turn INPUT SELECTOR to select the
input you want to create an index name
for. Then, press MAIN MENU repeatedly
to select “CUSTOM”.
2
3
Turn MENU to select “NAME IN”.
Press MEMORY/ENTER.
The cursor flashes and you can select a
character.
4
Use MENU and –/+ to create an index
name.
Turn –/+ to select a character, then turn
MENU to move the cursor to the next
position.
Tips
• You can select the character type as follows by
turning –/+.
Alphabet (upper case) t Numbers t Symbols
• To enter a blank space, turn –/+ until a blank
space appears in the display.
• If you made a mistake, turn MENU until the
character you want to change flashes, then turn
–/+ to select the correct character.
5
Press MEMORY/ENTER to store the
index name.
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the command
mode of the receiver
Using the Sleep Timer
You can set the receiver to turn off automatically
at a specified time.
Use the remote for the operation.
This function is useful when you use 2 Sony
receivers in the same room.
1
2
Press ALT to light up the button.
1
2
Turn off the receiver.
Press SLEEP repeatedly while the
power is on.
Hold down INPUT MODE and press ?/1
to turn on the receiver.
Each time you press SLEEP, the display
changes cyclically as follows:
2-00-00 t 1-30-00 t 1-00-00 t
0-30-00 t OFF
“C.MODE.AVX” appears in the display.
Each time you repeat the procedure above,
the display changes as follows:
C.MODE.AV1 y C.MODE.AV2
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
The initial setting is “C.MODE.AV2”.
Tip
Notes
To check the remaining time before the receiver turns
off, press ALT to light up the button (page 49), then
press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
• The initial setting for the command mode of the
supplied remote is “AV2”.
• If the command mode of the receiver and the remote
is different, you cannot use the remote to operate the
receiver.
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the speaker
system
Recording
Before you begin, make sure you have
connected all components properly.
You can select the front speaker system you
want to use.
Recording on an audio tape or
MiniDisc
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front speaker
system you want to use.
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
The selected speaker system indicator lights up
in the display. To turn off the speaker output,
press SPEAKERS (OFF/A/B/A+B) repeatedly
until “SP A” and “SP B” indications in the
display turn off.
1
2
Select the component to be recorded.
Prepare the component for playing.
To select
Indicator
lights up in
the display
For example, insert a CD into the CD
player.
The speaker connected to the
SP A
3
4
Insert a blank tape or MiniDisc into the
recording deck and adjust the
recording level, if necessary.
SPEAKERS FRONT A terminals.
The speaker connected to the
SP B
SPEAKERS FRONT B terminals.
Start recording on the recording deck,
then start playback on the playback
component.
The speakers connected to both the SP A and SP B
SPEAKERS FRONT A and B
terminals (parallel connection).*
Notes
* (Except for models of area code CEK)
• You cannot record a digital audio signal using a
component connected to the analog MD/TAPE OUT
jacks. To record a digital audio signal, connect a
digital component to the DIGITAL OPTICAL
MD/TAPE OUT jack.
When the IMPEDANCE SELECTOR is set to “8Ω”,
connect the speakers with a nominal impedance of
16 ohms or higher. When the IMPEDANCE
SELECTOR is set to “4Ω”, connect the speakers
with a nominal impedance of 8 ohms or higher. For
details, see “Speaker impedance” on page 14.
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from the MD/TAPE OUT jacks even when
MULTI CH IN is being used. The analog audio
signals of the current or previously used input are
output.
(Models of area code CEK only)
If you connect speakers to both SPEAKERS FRONT
A and B terminals, connect the speakers with a
nominal impedance of 16 ohms or higher.
• No signals are output from DIGITAL OPTICAL
MD/TAPE OUT jack when ANALOG DIRECT
function is being used. The digital circuitry power is
cut off to ensure superior sound quality when
“D.PWR XXX” is set to “D.PWR OFF”.
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to record
from the sources.
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording on a video tape
You can record from a VCR, a TV or a DVD
player using the receiver. You can also add
audio from a variety of audio sources when
editing a video tape. See the operating
instructions of your VCR or DVD player if you
need help.
1
2
Select the program source to be
recorded.
Prepare the component for playing.
For example, insert a video tape you want to
record into VCR.
3
4
Insert a blank video tape into the VCR
(VIDEO 1 or VIDEO 2) for recording.
Start recording on the recording VCR,
then start playing the video tape or
DVD you want to record.
Notes
• You cannot record a digital audio signal using a
component connected to the analog VIDEO 1
AUDIO OUT or VIDEO 2 AUDIO OUT jacks.
• Make sure to make both digital and analog
connections to the TV/SAT and DVD inputs. Analog
recording is not possible if you make only digital
connections.
• The analog audio signals of the current input are
output from the VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks.
• The signals input to the MULTI CH IN jacks are not
output from VIDEO 1 AUDIO OUT or VIDEO 2
AUDIO OUT jacks even when MULTI CH IN is
being used. The analog audio signals of the current or
previously used input are output.
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Using the Remote RM-AAP002
You can use the remote RM-AAP002 to operate
the components in your system.
Remote button
description
Before you use your
remote
ej
1
TV ?/1
AV ?/1
P
?/1
RM SET UP
2
3
eh
eg
Inserting batteries into the
remote
SYSTEM STANDBY SLEEP
VIDEO1 VIDEO2 VIDEO3 DVD
4
5
ef
ed
es
ea
e;
AV1
AV2
Insert R6 (size-AA) batteries with the + and –
properly oriented in the battery compartment.
When using the remote, point it at the remote
TV/SAT MD/TAPE SA-CD/CD TUNER
6
7
8
9
PHONO
2CH
AUX
MULTI CH SOURCE
sensor
on the receiver.
A.F.D.
DIRECT
ANGLE
MOVIE
DUAL
MUSIC
SB
1
4
7
2
5
8
3
TEST
TONE
MONO DECODING
q;
wl
6
JUMP/
TIME
PRESET/
AUDIO
CH/D.SKIP
9
qa
SUBTITLE ENTER
.
>
wk
wj
0/10
>10/11
12
qs
qd
qf
qg
SHIFT D.TUNING
DISC
ALT
-
m
M
ANT
CLEAR SEARCH MODE
*
X
x
H
wh
wg
Tip
TOP MENU/
GUIDE
MUTING
Under normal conditions, the batteries should last for
about 6 months. When the remote no longer operates
the receiver, replace all batteries with new ones.
AV MENU
qh
MASTER
VOL
F
f
G
g
wf
Notes
*
qj
• Do not leave the remote in an extremely hot or humid
place.
O
ENTER
DISPLAY
TV VOL
RETURN/EXIT
TV/
qk
ql
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a
malfunction.
MAIN
MENU
TV CH
VIDEO
*
*
wd
ws
WIDE DIMMER
w;
wa
• If you do not use the remote for an extended period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
* The H, TV VOL +, TV CH + and MASTER VOL
+ buttons have a tactile dot. Use the tactile dot as a
reference when operating the receiver and other
audio/video components.
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The tables below show the settings of each
button.
Remote
Button
Operations
Function
CLEAR wj Satellite tuner/ Clears a mistake when
CD player/ you press the incorrect
Remote
Button
Operations
Receiver
Remote
Function
DVD player/ numeric buttons or
Blu-ray disc returns to continuous
recorder/PSX playback etc.
A.F.D. wl
Selects the decoding
mode for audio sound.
ALT qd
When ALT button
DIMMER Receiver
w;
Adjusts the brightness
of the display.
lights up, it changes
remote key function to
activate those buttons
with orange printing.
DIRECT
wl
Receiver
Selects ANALOG
DIRECT.
ANGLE wl DVD player/ Selects viewing angle
Blu-ray disc or changes the angles.
recorder
DISC qf
CD player/
VCD player
Selects a disc directly
(multi-disc changer
only).
ANT wj
VCR/
Selects output signal
DISPLAY Receiver/
wf TV/VCR/
Selects information
displayed on the TV
Satellite tuner from the antenna
terminal: TV signal or
VCR program.
Satellite tuner/ screen.
CD player/
VCD player/
LD player/
DVD player/
MD deck/
Blu-ray disc
recorder/
Hard disc
AUDIO wl TV/VCR/
Changes the sound to
Satellite tuner/ Multiplex, Bilingual
DVD player/ or Multi channel TV
Blu-ray disc Sound.
recorder/
Hard disc
recorder/PSX
recorder/PSX
AUX e;
Receiver
To listen to an audio
equipment.
D.TUNING Receiver
Enters direct tuning
mode.
wj
AV MENU VCR/
wf Satellite tuner/
Displays menu.
DUAL
MONO wl
Receiver
Receiver
Selects the language
you want during digital
broadcast.
DVD player/
Blu-ray disc
recorder/
DVD 4
To watch DVD.
Hard disc
recorder/PSX
ENTER wf Receiver/
Enters the selection.
VCR/
AV 1 ef and Remote
AV 2 eg
Select the command
mode of the remote.
Satellite tuner/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
AV ?/1
TV/VCR/
Turns the audio and
1
Satellite tuner/ video components on
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Blu-ray disc
recorder/
or off.
ENTER qs TV/VCR/
After selecting a
Satellite tuner/ channel, disc or track
LD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
using the numeric
buttons, press to enter
the value.
Hard disc
recorder/PSX
Hard disc
recorder/PSX
continued
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Button
Operations
Function
Remote
Button
Operations Function
SB
Receiver
Selects the surround
back decoding modes.
JUMP/TIME Satellite tuner Toggles between the
DECODING
q;
wl
previous and the
current channels.
SEARCH
MODE qf
DVD player Selectssearchingmode.
Press to select the unit
for search (track, index,
etc.)
CD player/
Shows the time or
VCD player/ displays the playing
DVD player/ time of disc, etc.
MD deck/
Blu-ray disc
recorder
SHIFT wj
Receiver
Selects a memory page
for presetting radio
stations or tuning to
preset stations.
MAIN
MENU ql
Receiver
Receiver
Selects the menu of the
receiver.
SLEEP 2 Receiver
Activates the sleep
function and the
duration which the
receiver turns off
automatically.
MASTER
VOL +/– qj
Adjusts the master
volume of the receiver.
MD/TAPE Receiver
To listen to Minidisc
or audio tape.
ed
MOVIE wl Receiver
Selects the pre-
programmed sound
fields for movie.
SOURCE
7
Remote
Selects 2ND ZONE
output.
SUBTITLE DVD player Changes the subtitles.
wk
MULTI CH Receiver
8
Selects MULTI CH IN
source.
SYSTEM
STANDBY TV/VCR/
(Press AV
Receiver/
Turns off the receiver
and other Sony audio/
MUSIC 9 Receiver
Selects the pre-
programmed sound
fields for music.
Satellite tuner/ video components.
?/1 1 and CD player/
?/12 atthe VCD player/
same time) LD player/
DVD player/
MUTING
qh
Receiver
Mutes the sound from
the receiver.
PHONO ea Receiver
To listen to turntable.
Selects preset stations.
Selects preset
MD deck/
DAT deck
PRESET/
Receiver
CH/
TV/VCR/
TEST
Receiver
Outputs test tone.
D.SKIP +/– Satellite tuner/ channels.
TONE wl
qa
Blu-ray disc
recorder/Hard
disc recorder
TOP MENU/ DVD player Displays DVD title.
GUIDE wf Satellite tuner/ Displays guide menu.
CD player/
VCD player/ changer only).
LD player/
Skips discs (multi-disc
Blu-ray disc
recorder/
Hard disc
DVD player/
recorder/PSX
MD deck
TUNER 6 Receiver
To listen to radio
programs.
RETURN/
VCD player/ Returnsto the previous
EXIT wf
LD player/
DVD player
menu.
TV CH +/– TV
ws
Selects preset TV
channels.
Satellite tuner Exits the menu.
TV/SAT es Receiver
To watch TV programs
or satellite receiver.
RM SET UP Remote
To set up the remote.
ej
TV/VIDEO TV
qk
Selects input signal: TV
input or video input.
SA-CD/CD Receiver
5
To listen to Super
Audio CD or compact
disc.
TV VOL
TV
Adjusts the volume of
the TV.
+/– wd
TV ?/1 eh TV
Turns the TV on or off.
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Button
Operations
Receiver
Receiver
Receiver
Function
Remote
Button
Operations
Function
VIDEO1
ef
To watch VCR.
(VTR mode 3)
./> VCR/
wk CD player/
Skips tracks.
VCD player/
DVD player/
LD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
VIDEO2
eg
To watch VCR.
(VTR mode 1)
VIDEO3
3
To watch VCR.
(VTR mode 2)
WIDE wa TV
Selects the wide picture
mode.
?/1 2
Receiver
Receiver
Turns the receiver on or
off.
Hard disc
recorder/PSX
2CH wl
Selects 2CH STEREO
mode.
m/M CD player/
Searches tracks in the
wj
VCD player/ forward or backward
DVD player/ direction.
LD player/
MD deck/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
1-9 wl and Receiver
0/10 wk
Use with SHIFT to
preset radio station or
tuning to preset stations
and with D.TUNING
for direct tuning.
CD player/
VCD player/ 0/10 selects track 10.
DVD player/
LD player/
MD deck/
Selects track numbers.
VCR/
DAT deck/
Tape deck
Fastforwards or
rewinds.
DAT deck/
Tape deck
H wh
VCR/
Starts playback.
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
TV/VCR/
Satellite tuner/ numbers.
Blu-ray disc
recorder/
Hard disc
Selects channel
recorder/PSX
>10/11 wk CD player/
Selects track numbers
VCD player/ over 10.
LD player/
Hard disc
recorder/PSX
MD deck/
Tape deck
X wg
VCR/
CD player/
VCD player/ recording with
LD player/
DVD player/ standby.)
MD deck/
DAT deck/
Pauses playback or
record. (Also start
TV/VCR/
Selects channel
Satellite tuner/ numbers over 10 or
Blu-ray disc selects number 11.
recorder/
Hard disc
recorder/PSX
components in record
Tape deck/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
continued
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Remote
Button
Operations
Function
• The 12, AUX and SOURCE buttons on the remote
are not available for receiver operation.
x qg
VCR/
Stops playback.
• Some functions explained in this section may not
work depending on the model.
CD player/
VCD player/
LD player/
DVD player/
MD deck/
DAT deck/
Tape deck/
Blu-ray disc
recorder/
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component the above operation may not be possible
or may operate differently than described.
• When you press input buttons (VIDEO1, VIDEO2,
VIDEO3, TV/SAT or DVD), the input mode of the
TV might not switch to the corresponding input
mode that you want. In this case, press TV/VIDEO
button to switch the input mode of the TV.
Hard disc
recorder/PSX
O wf
Satellite tuner/ Returns to the previous
VCD player/ menu or exits the menu.
LD player/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
V/v wf
Receiver
Receiver
Selects a menu item.
B/b wf
Adjusts or changes the
setting.
V/v/B/b
wf
VCR/
Selects a menu item.
Satellite tuner/
DVD player/
Blu-ray disc
recorder/
Hard disc
recorder/PSX
-/-- qf
TV/
Selects the channel
Satellite tuner/ entry mode, either one
Blu-ray disc or two digit.
recorder/
Hard disc
recorder/PSX
Tips
• You need to assign a component to the AUX and
MULTI CH buttons before you can use the buttons to
control your audio/video equipment. For details,
refer “Programming the remote” on page 53.
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
• Before you use the V/v/B/b buttons for receiver
operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the input button.
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the command
mode of the remote
Programming the remote
You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.
Furthermore, you can also program the remote
for Sony components that the remote is unable to
components that accept infrared wireless control
signals.
Set the remote command mode using the RM
SET UP button and the remote command mode
buttons.
Use a suitable tool to press the RM SET UP
button.
Selecting the command mode
AV2) of the remote. If the command mode of the
receiver and the remote is different, you cannot
use the remote to operate the receiver. To
change the command mode of the receiver, see
page 45.
1
Press AV ?/1 while holding down RM
SET UP.
The indicator lights up.
2
Press the input button (including TV
?/1) for the component you want to
control.
Press AV1 (or AV2) while holding down RM
SET UP.
For example, if you are going to control a
CD player, press SA-CD/CD.
The indicator flashes once (twice for AV2), then
the command mode switches.
3
Press the numeric buttons to enter the
more than one code exists)
corresponding to the component and
the maker of the component you want
to control.
To check the command mode of
the remote
Press RM SET UP. You can check the remote by
the indicator.
Mode
AV1
AV2
Indicator flashes
See the tables on pages 54–56 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit and
the last two digits of the numeric code
correspond to the category and the maker’s
code respectively.)
once
twice
To reset the remote to factory
settings
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
4
5
Press ENTER.
The indicator flashes 3 times, then goes off.
Once the numeric code has been verified,
the indicator slowly flashes twice and the
remote automatically exits the
programming mode.
Repeat steps 1 to 4 to control other
components.
continued
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel programming
The numeric codes
corresponding to the component
and the maker of the component
Press RM SET UP during any step. The remote
automatically exits the programming mode.
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than one
numeric code may be assigned to a component.
the codes, try using other codes.
To activate the input after
programming
Press the programmed button to activate the
input you want.
If programming is unsuccessful,
check the following:
• If the indicator does not light up in step 1, the
batteries are weak. Replace both batteries.
• If the indicator flashes 4 times in quick
an error has occurred. Start again from step 1.
Notes
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.
Notes
• All of the input buttons on this remote may not be
available when used with your particular component.
• The indicator turns off while a valid button is
pressed.
• In step 2, if several input buttons are pressed, only the
last pressed button is valid.
To control a CD player
Maker
Code(s)
101, 102, 103
104, 123
105, 106, 107
108, 109, 110
111, 116
116
• In step 2, if you press TV ?/1, only TV VOL +/– ,
TV CH +/–, TV/VIDEO and WIDE buttons are
reprogrammed.
SONY
DENON
• In step 3, if an input button is pressed, the new input
is selected and the programming procedure returns to
the beginning of step 3.
JVC
KENWOOD
MAGNAVOX
MARANTZ
ONKYO
• For the numeric codes, only the first three numbers
entered are valid.
112, 113, 114
115
To clear the memory of the
remote
PANASONIC
PHILIPS
116
To clear all programmes, do the following to
reset the remote to factory settings.
PIONEER
TECHNICS
YAMAHA
117
115, 118, 119
120, 121, 122
Press ?/1, AV ?/1 and MASTER VOL – at
the same time.
The indicator flashes 3 times, then goes off.
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a DAT deck
To control a VCR
Maker
Code(s)
203
Maker
Code(s)
SONY
SONY
701, 702, 703, 704, 705,
706
PIONEER
219
AIWA*
710, 750, 757, 758
707, 708, 709, 759
740
AKAI
To control an MD deck
BLAUPUNKT
EMERSON
Maker
Code(s)
301
711, 712, 713, 714, 715,
716, 750
SONY
DENON
JVC
302
FISHER
717, 718, 719, 720
721, 722, 730
723, 753
303
GENERAL ELECTRIC
GOLDSTAR
GRUNDIG
KENWOOD
304
724
To control a tape deck
HITACHI
722, 725, 729, 741
717
ITT/NOKIA
JVC
Maker
Code(s)
201, 202
204, 205
206, 207, 208, 209
210
726, 727, 728, 736
730, 731, 738
732, 733, 734, 735
736
SONY
MAGNAVOX
MITSUBISHI/MGA
NEC
DENON
KENWOOD
NAKAMICHI
PANASONIC
PHILIPS
PANASONIC
729, 730, 737, 738, 739,
740
216
211, 212
213, 214
215, 216
217, 218
PHILIPS
729, 730, 731
729
PIONEER
TECHNICS
YAMAHA
PIONEER
RCA/PROSCAN
722, 729, 730, 731, 741,
747
SAMSUNG
SANYO
742, 743, 744, 745
717, 720, 746
748, 749
To control an LD player
SHARP
Maker
Code(s)
601, 602, 603
606
TELEFUNKEN
TOSHIBA
ZENITH
751, 752
SONY
747, 755, 756
754
PIONEER
To control a video CD player
* If an AIWA VCR does not work even though you
enter the code for AIWA, enter the code for Sony
instead.
Maker
Code(s)
SONY
605
To control a DVD player
Maker
Code(s)
401, 402, 403
406, 408
407
SONY
PANASONIC
PHILIPS
PIONEER
TOSHIBA
DENON
409
404
405
continued
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a TV
To control a hard disc recorder
Maker
Code(s)
Maker
Code(s)
SONY
501, 502
SONY
307, 308, 309
DAEWOO
FISHER
GOLDSTAR
504, 505, 506, 515, 544
508
To control a blu-ray disc recorder
Maker
Code(s)
503, 511, 512, 515, 534,
544
SONY
310, 311, 312
GRUNDIG
HITACHI
517, 534
513, 514, 515, 544
521, 522
To control a PSX
ITT/NOKIA
JVC
Maker
Code(s)
516
SONY
313, 314, 315
MAGNAVOX
MITSUBISHI/MGA
NEC
503, 518, 544
503, 519, 544
503, 520, 544
509, 524
PANASONIC
PHILIPS
515, 518
PIONEER
509, 525, 526
510, 527, 529, 544
RCA/PROSCAN
SAMSUNG
503, 515, 531, 532, 533,
534, 544
SANYO
508, 545, 547
535
SHARP
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
523, 537, 547
530, 537, 547
535, 541
542, 543
To control a satellite tuner or
cable box
Maker
Code(s)
SONY
801, 802, 803, 804
JERROLD/G.I.
806, 807, 808, 809, 810,
811, 812, 813, 814
PANASONIC
RCA
818
805, 819
815, 816, 817
S. ATLANTA
To control a tuner
Maker
Code(s)
SONY
002, 003, 004, 005
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On cleaning
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
Additional Information
Precautions
On safety
Should any solid object or liquid fall into the cabinet,
unplug the receiver and have it checked by qualified
personnel before operating it any further.
If you have any question or problem concerning your
receiver, please consult your nearest Sony dealer.
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local power
supply. The operating voltage is indicated on the
nameplate at the rear of the receiver.
• The receiver is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the receiver itself has been turned off.
• If you are not going to use the receiver for a long
time, be sure to disconnect the receiver from the wall
outlet. To disconnect the AC power cord, grasp the
plug itself; never pull the cord.
• AC power cord must be changed only at the qualified
service shop.
On heat buildup
Although the receiver heats up during operation, this is
not a malfunction. If you continuously use this receiver
at a large volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid burning
yourself, do not touch the cabinet.
On placement
• Place the receiver in a location with adequate
ventilation to prevent heat buildup and prolong the
life of the receiver.
• Do not place the receiver near heat sources, or in a
place subject to direct sunlight, excessive dust or
mechanical shock.
• Do not place anything on top of the cabinet that
might block the ventilation holes and cause
malfunctions.
• Use caution when placing the receiver on surfaces
that have been specially treated (with wax, oil,
polish, etc.) as staining or discoloration of the surface
may result.
On operation
Before connecting other components, be sure to turn
off and unplug the receiver.
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from digital sources (from
COAXIAL or OPTICAL input jack).
• Check that the INPUT MODE is not set to
“ANALOG” (page 37). Check that the INPUT
MODE is not set to “COAX IN” for the sources
from OPTICAL input jack, or set to “OPT IN” for
the sources from COAXIAL input jack.
• Check that you have not selected MULTI CH IN
function.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
There is no sound or only very low-level
sound no matter which component is
selected.
• Check that the speakers and components are
connected securely and correctly.
• Check that both the receiver and all components
are turned on.
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
• Adjust balance parameters in the LEVEL menu.
• Check that you have selected the correct
component on the receiver.
There is severe hum or noise.
• Check that the speakers and components are
connected securely.
• Check that MASTER VOLUME –/+ is not set to
“–oodB” (volume minimum).
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters away
from a TV set or fluorescent light.
• Check that the SPEAKERS (OFF/A/B/A+B) is
not set to off (page 46).
• Check that the headphones are not connected.
• Press MUTING on the remote to cancel the
muting function.
• Move your audio components away from the TV.
• Make sure you have grounded U SIGNAL
GROUND terminal (only when a turntable is
connected).
There is no sound from a specific component.
• Check that the component is connected correctly
to the audio input jacks for that component.
• Check that the cord(s) used for the connection is
(are) fully inserted into the jacks on both the
receiver and the component.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
There is no sound from the surround back
speakers.
• Some discs have no Dolby Digital EX flag even
though the packages have Dolby Digital EX
logos. In this case, select “SB ON” (page 40).
• Check that you have selected the correct
component on the receiver.
There is no sound from one of the front
speakers.
There is no sound or only a very low-level
sound is heard from the center/surround/
surround back speakers.
• Select a CINEMA STUDIO EX mode (page 33).
• Make sure the center/surround speakers size
parameter are set to either “SMALL” or
“LARGE” (page 17 and 18).
• Connect a pair of headphones to the PHONES
jack to verify that sound is output from the
headphones. If only one channel is output from the
headphones, the component may not be connected
to the receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both channels are
output from the headphones, the front speaker
may not be connected to the receiver correctly.
Check the connection of the front speaker which is
not outputting any sound.
• Make sure the surround back speaker selection
parameter is set to either “DUAL” or “SINGLE”
(page 18).
• Make sure you have turn on your sub woofer.
• Check that the sub woofer is connected correctly
and securely.
There is no sound from analog 2 channel
sources.
• Check that the INPUT MODE is not set to
“COAX IN” or “OPT IN” (page 37).
• Check that you have not selected MULTI CH IN
function.
• Make sure the sub woofer selection parameter is
set to “YES” (page 17).
• There is no sound output from the sub woofer
depending on the sound field.
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The surround effect cannot be obtained.
• Make sure the sound field function is on (press
MOVIE or MUSIC).
• Check that the antennas are connected securely.
Adjust the antennas and connect an external
antenna if necessary.
• Sound fields do not function for the signals with a
sampling frequency of more than 48 kHz.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning (page 24).
Dolby Digital or DTS multi channel sound is
not reproduced.
• Make sure you set the tuning interval correctly
(when tuning in AM stations with direct tuning).
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
preset stations). Preset the stations (page 25).
• Press DISPLAY repeatedly so that the frequency
appears in the display.
• Check that the playing DVD, etc. is recorded in
Dolby Digital or DTS format.
• When connecting the DVD player, etc. to the
digital input jacks of this receiver, check the audio
setting (settings for the audio output) of the
connected component.
Recording cannot be done.
• Check that the components are connected
correctly.
RDS does not work.*
• Make sure that you are tuned to an FM RDS
station.
• Select the source component with INPUT
SELECTOR.
• Select a stronger FM station.
• Make sure that INPUT MODE is set to
“ANALOG” (page 37) before recording from a
digital component connected to the analog MD/
TAPE jacks.
The RDS information that you want does not
appear.*
• Contact the radio station and find out whether they
actually provide the service in question. If so, the
service may be temporarily out of order.
• Make sure that INPUT MODE is set to “COAX
IN” or “OPT IN” (page 37) before recording from
a digital component connected to the DIGITAL
OPTICAL MD/TAPE OUT jack.
There is no picture or an unclear picture
appears on the TV screen or monitor.
• Select the appropriate input on the receiver.
• Set your TV to the appropriate input mode.
• Move your audio components away from the TV.
• Connect your TV to the receiver using the same
type of connecting cord as the one used to connect
the receiver and video component (pages 7 and
10).
The FM reception is poor.
• Use a 75-ohm coaxial cable (not supplied) to
connect the receiver to an outdoor FM antenna as
shown below. If you connect the receiver to an
outdoor antenna, ground it against lightning. To
prevent a gas explosion, do not connect the ground
wire to a gas pipe.
The DIGITAL OPTICAL MD/TAPE OUT jack
flashes red.
• When “AUTO IN” is selected for INPUT MODE,
the jack flashes red when no digital audio signal is
input. This is depends on the INPUT MODE
function, and is not a malfunction.
Outdoor FM antenna
Receiver
AM
Ground wire
COAXIAL
(not supplied)
* Models of area code CEL, CEK only.
ANTENNA
To ground
continued
59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Error messages
If there is a malfunction, the display shows a
message. You can check the condition of the
receiver by the message. Refer to the following
table to solve the problem.
The remote does not function.
• The 12, AUX and SOURCE buttons on the remote
are not available for receiver operation.
• Point the remote at the remote sensor
receiver.
on the
DEC. ERR.
• Remove any obstacles in the path between the
remote and the receiver.
Appears when the signal which the receiver cannot
decode (ex. DTS-CD) is input when “DEC. XXXX”
in the CUSTOMIZE menu is set to “DEC. PCM”.
Set to “DEC. AUTO”.
• Replace all the batteries in the remote with new
ones, if they are weak.
• Check if the command modes of the receiver and
the remote is the same. If the command mode of
the receiver and the remote is different, you
cannot operate the receiver with the remote. To
switch the command mode of the receiver, press
pressing INPUT MODE. Each time you press
?/1, the command mode switches between
“C.MODE.AV2” and “C.MODE.AV1”. (The
initial setting is “C.MODE.AV2”.) To switch the
command mode of the remote, see “Selecting the
command mode of the remote” on page 53.
remote.
PROTECT
Irregular current is output from the speakers. The
receiver will automatically turn off after a few
seconds. Check the speaker connection and turn on
the power again. If this problem persists, consult
your nearest Sony dealer.
If you are unable to remedy the
problem using the
Clearing the receiver’s memory may remedy the
problem (page 16). However, note that all
memorized settings will be reset to their factory
settings and you will have to readjust all settings
on the receiver.
• You need to assign a component to the AUX and
MULTI CH buttons before you can use the
buttons to control your audio/video equipment.
For details, refer “Programming the remote” on
page 53.
If the problem persist
• To activate the buttons with orange printing, press
ALT first before pressing the buttons.
Consult your nearest Sony dealer.
• Before you use the V/v/B/b buttons for receiver
operation, press MAIN MENU. To operate other
components, press TOP MENU/GUIDE or AV
MENU after pressing the function button.
Reference sections for clearing
the receiver’s memory
To clear
See
All memorized settings
Customized sound fields
page 16
page 39
60GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Inputs (Analog)
PHONO
Specifications
Sensitivity: 2.5 mV
Impedance: 50 k ohms
3)
S/N : 86 dB
Amplifier section
Power Output
4)
(A, 2.5 mV
)
MULTI CH IN, SA-CD/ Sensitivity: 150 mV
CD, MD/TAPE, DVD, Impedance: 50 k ohms
TV/SAT, VIDEO 1, 2, 3 S/N : 96 dB
Models of area code CEL, CEK, TW
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
100 W + 100 W
(8 ohms 1 kHz, THD 0.7%)
3)
4)
1)
1)
1)
(A, 150 mV
)
110 W + 110 W
135 W + 135 W
3) INPUT SHORT.
(8 ohms 1 kHz, THD 10%)
4) Weighted network, input level.
1)
Reference Power Output
Inputs (Digital)
(8 ohms 20 Hz – 20 kHz, THD 0.09%)
2)
DVD, SA-CD/CD
(Coaxial)
Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
FRONT
:
100 W/ch
100 W
100 W/ch
100 W/ch
2)
CENTER
2)
:
SURR
:
2)
(A, 20 kHz LPF)
SURR BACK
:
DVD, TV/SAT,
MD/TAPE, VIDEO 3
(Optical)
Sensitivity: –
Impedance: –
S/N: 100 dB
(8 ohms 1 kHz, THD 0.7%)
2)
FRONT
:
110 W/ch
110 W
110 W/ch
110 W/ch
2)
CENTER
2)
:
(A, 20 kHz LPF)
SURR
:
2)
SURR BACK
(8 ohms 1 kHz, THD 10%)
FRONT
:
Outputs (Analog)
2)
:
135 W/ch
135 W
135 W/ch
135 W/ch
MD/TAPE (OUT),
VIDEO 1, 2
(AUDIO OUT)
Voltage: 150 mV
Impedance: 2.2 k ohms
2)
CENTER
2)
:
SURR
:
2)
SURR BACK
:
SUB WOOFER
Voltage: 2 V
Impedance: 1 k ohm
1) Measured under the following conditions:
Area code
CEL, CEK
TW
Power requirements
230 V AC, 50 Hz
110 V AC, 60 Hz
Outputs (Digital)
MD/TAPE (Optical)
Sensitivity: –
Equalizer
2) Depending on the sound field settings and the
source, there may be no sound output.
Gain levels
10 dB, 1 dB step
Frequency response
PHONO
RIAA equalization curve
0.5 dB
MULTI CH IN, SA-CD/ 10 Hz – 100 kHz
CD, MD/TAPE, DVD, +0.5/–2 dB (when
TV/SAT, VIDEO 1, 2, 3 ANALOG DIRECT is
selected)
continued
61GB
Download from Www.Somanuals.com. All Manuals Search And Download.
FM tuner section
Video section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
Sensitivity
Mono:
Stereo:
Useable sensitivity
S/N
87.5 - 108.0 MHz
FM wire antenna
75 ohms, unbalanced
10.7 MHz
Inputs/Outputs
Video:
S-video:
1 Vp-p, 75 ohms
Y: 1 Vp-p, 75 ohms
C: 0.286 Vp-p, 75 ohms
COMPONENT VIDEO: Y: 1 Vp-p, 75 ohms
PB/CB/B-Y: 0.7 Vp-p,
75 ohms
18.3 dBf, 2.2 µV/75 ohms
38.3 dBf, 22.5 µV/75 ohms
11.2 dBf, 1 µV/75 ohms
PR/CR/R-Y: 0.7 Vp-p,
75 ohms
Mono:
Stereo:
76 dB
70 dB
80 MHz HD Pass Through
Harmonic distortion at 1 kHz
General
Power requirements
Mono:
0.3%
Stereo:
0.5%
Area code
CEL, CEK
TW
Power requirements
230 V AC, 50/60 Hz
110 V AC, 50/60 Hz
Separation
Frequency response
45 dB at 1 kHz
30 Hz – 15 kHz,
+0.5/–2 dB
Selectivity
60 dB at 400 kHz
Power consumption
AM tuner section
Tuning range
Models of area code CEL, CEK, TW
With 9-kHz tuning scale: 531 – 1,602 kHz
Area code
CEL, CEK
TW
Power consumption
290 W
520 W
Antenna
Loop antenna
Intermediate frequency
Usable sensitivity
450 kHz
50 dB/m (at 1,000 kHz or
999 kHz)
Power consumption (during standby mode)
0.3 W
Dimensions (w/h/d) (Approx.)
S/N
54 dB (at 50 mV/m)
0.5% (50 mV/m, 400 Hz)
397 × 160.5 × 430 mm
including projecting parts
and controls
Harmonic distortion
Selectivity
At 9 kHz:
35 dB
Mass (Approx.)
13.5 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAP002 (1)
R6 (size-AA) batteries (2)
AC power cord (Except for models of area code TW
(Taiwan)) (1)
For details on the area code of the component you
are using, see page 2.
Design and specifications are subject to change
without notice.
62GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of button locations and reference pages
Illustration number
How to use this page
r
Use this page to find the location of buttons and other
parts of the receiver that are mentioned in the text.
DISPLAY 9 (26, 27, 59)
R
R
Name of button/part
Reference page
Receiver
PUSH wf (63)
ALPHABETICAL ORDER
M - Z
SPEAKERS (OFF/A/B/A+B) wh
(15, 46, 58)
MAIN MENU 4 (17, 38, 39, 44)
MASTER VOLUME –/+ qa (16,
20, 22, 58)
A - L
SURR BACK DECODING ql
(35)
A.F.D. qj (32, 34)
Cover ws (63)
25, 44)
TUNING –/+ w; (23)
VIDEO 3 INPUT (jacks) wd (6, 7)
MOVIE qh (33, 34, 59)
MULTI CHANNELDECODING
(indicator) 8 (23)
DISPLAY 9 (26, 27, 59)
Display 7 (28)
NUMBERS AND SYMBOLS
INPUT MODE q; (37)
INPUT SELECTOR qf (22, 23,
25, 30, 37, 41, 44, 59)
IR (receptor) 1 (48, 60)
2CH qk (30, 34, 39)
–/+ 6 (17, 38, 40, 44)
?/1 (power) 2 (16, 17, 24, 39,
60)
MULTI CH IN qd (23)
MUSIC qg (34, 59)
PHONES (jack) wg (22, 58)
PRESET TUNING –/+ wa (25)
1
0
qa
2 3
4
5
6
7
8
9
wh
wg wf
ws
wa
w; ql qk qj qh qg
qf
qd
qs
wd
To remove the cover
P
U
S
H
Press PUSH to remove the cover. When you remove the
cover, keep the cover out of reach of the children.
63GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
Adjusting
CUSTOMIZE parameters 40
RDS 26
Recording
EQUALIZER parameters 39
LEVEL parameters 38, 43
speaker levels and balance 20
Automatic tuning 23
on a video tape 47
on an audio tape or MD 46
Remote commander 48–56
S
Selecting
C
component 22
Changing
sound field 33–34
speaker system 46
Sleep Timer 45
display 27
Clearing receiver’s memory 16
CUSTOMIZE menu 40
Sound field
customizing 38
pre-programmed 33–34
resetting 39
selecting 33–34
D
Digital Cinema Sound 33
Direct tuning 24
Speaker crossover frequency 42
SPEAKER SETUP menu 17, 41
Speakers
Dual Mono 41
Dubbing. See Recording
adjusting speaker levels and balance 20
connection 14
impedance 14
E
Editing. See Recording
placement 14
EQUALIZER menu 39
Supplied accessories 62
I
Indexing. See Naming
Test tone 20
Tuning
automatically 23
directly 24
to preset stations 25
L
Labeling. See Naming
LEVEL menu 38, 43
N
Naming 44
P
Preset stations
how to 25
how to tune 25
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|