3-095-514-12(1)
Micro HI-FI
Component System
Operating Instructions
CMT-HX3
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback on
this product is not guaranteed.
Music discs encoded with copyright
protection technologies
is product is designed to playback
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some record
companies. Please be aware that among
those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MICROVAULT is a trademark of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and
their logos are trademarks of Sony
Corporation.
U.S. and foreign patents licensed from
Dolby Laboratories.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and omson.
ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to parts and controls
is manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Unit
Front panel
Top panel
Continued
ꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote
Unit: VOLUME control (page 13,
14, 15, 17)
Remote: VOLUME +/ button
(page 13, 14, 15, 17)
Turn or press to adjust the volume.
AUDIO IN jack (page 17)
Connect to an optional audio
component.
PHONES jack
Connect the headphones.
(open/close) button (page 13)
Press to open or close the disc tray.
(USB) port (page 15, 29)
Connect to an optional USB device
(Digital music player or USB storage
media).
/ (power) button (page 12, 21,
24, 25)
Press to turn on the system.
Playback buttons and function
buttons
Unit: USB (play/pause)
button (page 15)
STANDBY indicator (page 18, 22)
Lights up when the system is turned off.
Press to select the USB function.
Press to start or pause playback of an
optional USB device (Digital music
player or USB storage media).
Remote: USB button (page 15)
Press to select the USB function.
USB MEMORY indicator
Lights up when an optional USB device
(Digital music player or USB storage
media) is connected.
Remote sensor (page 22)
ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Unit: CD (play/pause)
/ (go back/go forward)
button (page 13, 16, 19)
Press to select a track or file.
button (page 13)
Press to select the CD function.
Press to start or pause playback of a disc.
Remote: CD button (page 13)
Press to select the CD function.
Unit: TUNE +/ (tuning) button
(page 14)
Remote: +/ (tuning) button
(page 14, 20)
Press to tune in the desired station.
Remote: (play) button,
(pause) button
Press to start or pause playback.
TUNER/BAND button (page 14)
Press to select the TUNER function.
Press to select FM or AM reception
mode.
+/ (select folder) button
(page 13, 16, 19)
Press to select a folder.
/ (rewind/fast forward)
button (page 13, 16)
Press to find a point in a track or file.
Unit: AUDIO IN button (page 17)
Press to select the AUDIO IN function.
FUNCTION button
Press to select the function.
PLAY MODE/TUNING MODE
button (page 13, 14, 16, 19, 20)
Press to select the play mode of a CD,
MP3 disc or an optional USB device
(Digital music player or USB storage
media).
Unit: /CANCEL (stop/cancel)
button (page 13, 14, 16)
Remote: (stop) button (page
13, 14, 16)
Press to stop playback.
Press to cancel search.
Press to select the tuning mode.
Sound buttons (page 17)
Unit: DSGX button
SEARCH button (page 13, 16)
Press to enter or exit search mode.
Remote: EQ button
Press to select the sound effect.
ENTER button (page 12, 19, 20,
21)
Press to enter the settings.
DISPLAY button (page 18)
Press to change the information on the
display.
Continued
ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CLOCK/TIMER SELECT button
(page 21)
CLOCK/TIMER SET button (page
12, 21)
Press to set the clock and the Play Timer.
REPEAT/FM MODE button (page
13, 14, 16)
Press to listen to a disc, a single track or
file repeatedly.
Press to select the FM reception mode
(monaural or stereo).
Battery compartment lid
(page 11)
CLEAR button (page 19)
Press to delete a pre-programmed track
or file.
TUNER MEMORY button (page
20)
Press to preset the radio station.
SLEEP button (page 21)
Press to set the Sleep Timer.
ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Information on the display
Play/Pause
Audio format
DSGX (page 17)
Play mode (page 13, 16)
Tuner reception mode (page 14)
Tuner reception (page 14)
Timer (page 21)
Text information
ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system securely
Wall socket
Right speaker
Left speaker
or
FM lead antenna (Extend it horizontally.)
Power
White side for North American model
For models with a voltage selector, set
Brown side for other regions
AM loop antenna
VOLTAGE SELECTOR to the local
power line voltage.
Connect the power cord to a wall socket.
If the plug does not fit the wall socket,
detach the supplied plug adaptor (only
for models equipped with an adaptor).
Speakers
Antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
When carrying this system
With normal use, the batteries should last for
about six months.
Do not mix an old battery with a new one or
mix different types of batteries.
If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
1
2
3
Remove a disc to protect the CD
mechanism.
Press CD
function.
to select the CD
Hold down SEARCH
and press
on the unit,
on the unit until
“STANDBY”appears.
4
After “LOCK”appears, unplug the
power cord.
Speaker pads
Attach the supplied speaker pads to
the bottom of the speakers to prevent
slipping.
To use the remote
Slide and remove the battery
compartment lid , and insert the two
supplied R6 (size AA) batteries, side
first, matching the polarities shown
below.
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock
Use buttons on the remote to set the
clock.
1
2
Press /
system.
to turn on the
.
Press CLOCK/TIMER SET
If the current mode appears on
the display, press /
repeatedly to select “CLOCK SET?”
.
and then press ENTER
repeatedly
to set the hour, and then press
3
4
Press /
.
ENTER
Use the same procedure to set
the minutes.
e clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY . e clock is displayed
for about 8 seconds.
1ꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operation
Basic Operations
To
Press
Pause playback (or CD on the
unit) . To resume
Playing a CD/MP3 disc
play, press the button
again.
1
Select the CD function.
.
Stop playback
Press CD
.
Select a folder
on an MP3
disc
Select a track /
or file
+/
.
2
Place a disc.
Press
on the unit, and place
a disc with the label side up on the
disc tray.
.
Select a folder SEARCH . Press
and file on
/
to select
an MP3 disc the desired folder, then
to select
while viewing press ENTER . Press
the folder and /
file names on the desired file, then
.
the display
press ENTER
Find a point in Hold down /
a track or file
during playback, and
To close the disc tray, press
on
release the button at the
desired point.
the unit again.
Do not force the disc tray closed with
your finger, as this may damage the
unit.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
3
4
Start playback.
Press (or CD on the unit)
To change the play mode
.
Press PLAY MODE
repeatedly while
the player is stopped. You can select
normal play (“ *” for all MP3 files
in the folder on the disc), shuffle play
Adjust the volume.
Press VOLUME +/ (or turn the
.
VOLUME control on the unit)
(“SHUF” or “
play (“PGM”).
(SHUF)
Play performs the same operation as normal
(shuffle) play.
SHUF*”), or program
*
When playing a CD-DA disc,
Notes on Repeat Play
All tracks or files on a disc are played
repeatedly up to five times.
“REP1” indicates that a single track or file is
repeated until you stop it.
Continued
1ꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing MPꢁ discs
Do not save other types of files or
unnecessary folders on a disc that has MP3
files.
Folders that have no MP3 files are skipped.
MP3 files are played back in the order that
they are recorded onto the disc.
Listening to the radio
1
Select “FM”or “AM.”
Press TUNER/BAND
repeatedly.
e system can only play MP3 files that have
2
Select the tuning mode.
a file extension of “.MP3”.
Press TUNING MODE
until “AUTO” appears.
repeatedly
If there are files on the disc that have the
“.MP3” file extension, but that are not MP3
files, the unit may produce noise or may
malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 files is 511.
MP3 files and folders that can be
contained on a single disc is 512.
folder levels (the tree structure of files) is
8.
Compatibility with all MP3 encoding/writing
soſtware, recording device, and recording
media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted
audio or may not play at all.
3
4
Tune in the desired station.
Press +/ (or TUNE +/ on
the unit) . Scanning stops
automatically when a station is tuned
in, and then “TUNED” and “ST” (for
stereo programs only) appear.
When you tune in a station that
provides RDS services, the station
name appears on the display
(European model only).
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3)
session, it is recognized as a CD-DA (or
MP3) disc, and other sessions are not played
back.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
A disc with a mixed CD format is recognized
as a CD-DA (audio) disc.
To stop automatic scanning
.
Press
To tune in a station with a weak signal
If “TUNED” does not appear and the
scanning does not stop, press TUNING
MODE
repeatedly until “AUTO” and
“PRESET” disappear, and then press
+/ (or TUNE +/ on the unit)
repeatedly to tune in the desired station.
To reduce static noise on a weak FM
stereo station
Press FM MODE
repeatedly until
“MONO” appears to turn off stereo
reception.
1ꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Select the USB function.
Listening to music of
an USB device
Press USB
.
Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
You can connect an optional USB device
(Digital music player or USB storage
media) to the
(USB) port
on the
port
as shown below.
unit and listen to music stored in the USB
device. See “Playable USB devices” (page
29) for a list of USB devices that can be
connected to this system.
e audio formats that can be played
back by this system are as follows:
ATRAC/MP3*/WMA*/AAC*
*
Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
USB device (Digital
music player or USB
storage media)
When USB cable connection is
necessary, connect the USB cable
supplied with the USB device to be
connected.
See the operation manual supplied
with the USB device to be connected
for details on the operation method.
When the USB device is connected,
the display changes as follows:
“Reading”
“ATRAC AD1)” or
“STORAGE DRIVE2)”
1)
When connecting a digital music player.
When connecting USB storage media.
2)
e volume label is displayed next if
recorded.
Note
It may take about 10 seconds before “Reading”
appears depending on the type of USB device
connected.
3
4
Start playback.
Press (or USB on the unit)
.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
Continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on the USB device
Other operation
Do not connect the system and the USB
device through a USB hub.
To
Press
With some connected USB devices, aſter an
operation is performed, there may be a delay
before it is performed by this system.
is system does not necessarily support all
the functions provided in a connected USB
device.
Pause playback (or USB on
the unit) . To resume
play, press the button
again.
Stop playback
Select a folder
.
e playback order for the system may differ
from the playback order of the connected
USB device.
.
+/
Select a file
/
.
Always hold down
and make sure that
Select a folder SEARCH . Press
“No Device” appears before removing the
USB device. Removing the USB device while
“No Device” is not displayed may corrupt the
data on it or damage the USB device itself.
and file while /
viewing the the desired folder, then
folder and file press ENTER . Press
to select
to select
names on the /
Do not save other types of files or
unnecessary folders on an USB device that
has audio files.
system display* the desired file, then
press ENTER
.
Find a point in Hold down /
Folders that have no audio files are skipped.
Files are played back in the order that they
are transferred to the USB device.
e maximum numbers of folders and files
that can be contained on a single USB device
are as follows:
Digital music player: 65,535 groups
(maximum 999 tracks per group)
a file
during playback,
and release the button
at the desired point.
Select Repeat REPEAT
repeatedly
Play
until “REP” or “REP1”
appears.
Remove the
USB device
Hold down
until
USB storage media: 999 files
“No Device” appears,
then remove the USB
device.
e maximum number of files and folders
may vary depending on the file and folder
structure.
e audio formats that you can listen to with
this system are as follows:
*
You can search by different information such
as album or genre for digital music players.
MP3: file extension “.mp3”
Windows Media Audio file: file extension
To change the play mode
“.wma”
AAC: file extension “.m4a”
Press PLAY MODE
repeatedly while
the USB device is stopped. You can
select normal play (“ ” for all files in
the folder on the digital music player),
shuffle play (“SHUF” or “ SHUF”), or
program play (“PGM”).
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
soſtwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
1ꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using optional audio
components
Adjusting the sound
To add a sound effect
To
Press
1
Connect additional audio
component to the AUDIO
Generate a
more dynamic
sound
DSGX
on the unit.
IN jack
on the unit using
an audio analog cord (not
supplied).
(Dynamic
Sound
Generator
X-tra)
2
Turn down the volume.
Press VOLUME (or turn the
VOLUME control on the unit)
Set the sound EQ
effect
repeatedly
.
to select “BASS”
or “TREBLE,” and
3
4
5
Select the AUDIO IN function.
then press +/
repeatedly to adjust the
level.
Press AUDIO IN
on the unit.
Start playing the connected
component.
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)
.
1ꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display
To
Press
Change
DISPLAY
repeatedly
information on when the system is on.
the display1)
Check the
DISPLAY
when
clock when the the system is off2). e
system is off
clock is displayed for 8
seconds.
1)
For example, you can view CD/MP3 disc
information or the USB device information,
such as the track or file number or folder
name during normal play, or the total
playing time while the player is stopped.
2)
e STANDBY indicator
on the unit
lights up when the system is off.
Notes on the display information
Characters that cannot be displayed appear
as “_”.
e following are not displayed:
total playing time for a CD-DA disc
depending on the play mode.
total playing time and remaining playing
time for an MP3 disc and USB device.
e following are not displayed correctly:
folder and file names that do not follow
either the ISO9660 Level 1, Level 2 or
Joliet in the expansion format.
e following are displayed:
ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
ID3 tag information for “ATRAC” files
when ID3 version 2 tags are used.
1ꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press ENTER
to add the track
Other Operations
or file to the program.
CD
Creating your own
“ . ” appears when the total
program time exceeds 100 minutes
for a CD, or when you select a CD
track whose number is 21 or over, or
when you select an MP3 file.
program
(Program Play)
1
Select the desired function.
USB
e total program time cannot be
displayed, so “ . ” appears.
CD
Press CD
function.
to select the CD
5
6
Repeat steps 3 through 4 to
program additional tracks or
files, up to a total of 25 tracks or
files.
USB
Press USB
function.
to select the USB
repeatedly
2
3
Press PLAY MODE
until “PGM”appears while the
system is stopped.
To play your program of tracks
.
or files, press
e program remains available until
you open the disc tray or remove
the USB device. To play the same
Press /
until the desired track or file
number appears.
repeatedly
.
program again, press
When programming files, press
To cancel Program Play
+/
repeatedly to select the
Press PLAY MODE
repeatedly until
desired folder, and then select the
desired file.
Example: When programming tracks
on a CD
“PGM” disappears while the system is
stopped.
To delete the last track or file of the
program
Press CLEAR
stopped.
while the system is
Selected track or file number Total playing time of
program (including
selected track or file)
1ꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
To call up a preset radio
Presetting radio
stations
You can preset your favorite radio
stations and tune them in instantly
by selecting the corresponding preset
number.
Use buttons on the remote to preset
stations.
station, press TUNING MODE
repeatedly until “PRESET”
appears, and then press +/
repeatedly to select the desired
preset number.
1
Tune in the desired station (see
“Listening to the radio”(page
14)).
.
2
Press TUNER MEMORY
Preset number
3
Press +/
repeatedly to
select your desired preset
number.
If another station is already assigned
to the selected preset number,
the station is replaced by the new
stations.
.
4
5
Press ENTER
Repeat steps 1 through 4 to
store other stations.
You can preset up to 20 FM and 10
AM stations. e preset stations are
retained for about half a day even if
you disconnect the power cord or if a
power failure occurs.
ꢀ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Select the sound source.
Using the Timers
e system offers two timer functions.
If you use the Play Timer with the Sleep
Timer, the Sleep Timer has priority.
Press /
repeatedly until
the desired sound source appears, and
then press ENTER . e display
shows the timer settings.
Press /
to turn off the
Sleep Timer:
system.
You can fall asleep to music. is
function works even if the clock is not
set.
e system turns on 15 seconds
before the preset time. If the system is
on at the preset time, the Play Timer
will not play.
Press SLEEP
repeatedly.
If you select “AUTO,” the system
automatically turns off aſter the current
disc stops or in 100 minutes.
To activate or check the timer again
Press CLOCK/TIMER SELECT , press
/
repeatedly until “PLAY
Play Timer:
SEL?” appears, and then press ENTER
You can wake up to CD, tuner or optional
USB device at a preset time.
Use buttons on the remote to control the
Play Timer. Make sure you have set the
clock.
.
To cancel the timer
Repeat the same procedure as above until
“TIMER OFF?” appears, and then press
.
ENTER
1
Prepare the sound source.
Prepare the sound source, and then
To change the setting
press VOLUME +/
to adjust the
Start over from step 1.
volume.
To start from a specific track or file,
create your own program (page 19).
Tip
e Play Timer setting remains as long as the
setting is not canceled manually.
.
2
3
Press CLOCK/TIMER SET
Press /
repeatedly
to select “PLAY SET?,”and then
.
press ENTER
“ON TIME” appears, and the hour
indication flashes.
4
5
Set the time to start playing.
Press /
repeatedly to set
the hour, and then press ENTER
.
e minute indication flashes. Use the
procedure above to set the minutes.
Use the same procedure as in
step 4 to set the time to stop
playing.
ꢀ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Severe hum or noise.
Move the system away from sources of
Others
noise.
Connect the system to a different wall
socket.
Install a noise filter (available
separately) to the power cord.
Troubleshooting
Make sure the power cord and
speaker cords are correctly and firmly
connected.
1
The remote does not function.
Remove any obstacles between the
on
2
Find your problem in the checklist
below, and take the indicated
corrective action.
remote and the remote sensor
the unit, and position the unit away
from fluorescent lights.
If the issue persists, contact your
nearest Sony dealer.
Point the remote at the system’s sensor.
Move the remote closer to the system.
The STANDBY indicator
remains lit
If the STANDBY indicator flashes
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set to
the correct voltage?
after unplugging the power cord.
e STANDBY indicator
may not
turn off immediately aſter unplugging
the power cord. is is not a
malfunction. e indicator will turn off
aſter about 40 seconds.
Are you using only the supplied
speakers?
CD/MP3 player
Is anything blocking the ventilation
holes on the top or back of the
system?
The sound skips, or the disc will not
play.
Wipe the disc clean, and replace it.
Move the system to a location away
from vibration (for example, on top of
a stable stand).
Move the speakers away from the
system, or place them on separate
stands. At high volume, speaker
vibration may cause the sound to skip.
Aſter the STANDBY indicator
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
General
Sound comes from one channel,
or the left and right volumes are
unbalanced.
Place the speakers as symmetrically as
possible.
Connect only the supplied speakers.
ꢀꢀGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Play does not start from the first
track.
There is no sound.
e USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
the USB MEMORY indicator
up.
Press PLAY MODE
repeatedly until
both “PGM” and “SHUF” disappear to
return to normal play.
lights
Starting playback takes more time
than usual.
The sound is distorted.
e following discs take a longer time
e bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
to start playback.
a disc recorded with a complicated
tree structure.
a disc recorded in multisession
mode.
a disc that has not been finalized (a
disc to which data can be added).
a disc that has many folders.
There is noise or the sound skips.
Turn off the system, then reconnect the
USB device.
e music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
USB device
When using the USB storage media,
copy the files to your computer, format
the USB storage media in FAT16 or
FAT32 format, and copy the files to the
USB storage media again.*
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices”
(page 29) for the supported device
types.
e USB device is not recognized.
File or folder names are not
displayed on this system.
The USB device cannot be connected
.
into the
(USB) port
e USB device is being connected
backwards. Connect the USB device in
the correct orientation.
Playback is not possible.
e sound skips.
ere is noise.
The USB storage media which has
been used on another device does
not work.
It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB storage media by copying them to
your computer hard disk. Next, format
the USB storage media with a FAT16
or FAT32 file system and transfer the
backed-up audio files onto the USB
storage media again.*
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port . Turn off the system and
remove the USB device from the
(USB) port . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
Continued
ꢀꢁGB
Download from Www.Somanuals.com. All Manuals Search And Download.
“Reading” is displayed for a long
time.
It may take a while to finish reading the
USB device if there are many folders
or files on it. us, we recommend
following these guidelines.
Tuner
Severe hum or noise, or stations
cannot be received. (“TUNED” or “ST”
flashes on the display.)
Connect the antenna properly.
Total folders on USB device: 100 or
Find a location and an orientation that
provide good reception, and then set
up the antenna again.
less
Total files per folder: 100 or less
Keep the antennas away from the
speaker cords, the power cord and the
USB cable to avoid picking up noise.
Connect a commercially available
external antenna.
Erroneous display
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
Consult your nearest Sony dealer if the
supplied AM antenna has come off the
plastic stand.
Play does not start.
Turn off the system, then reconnect the
USB device.
Connect the USB device that this
system can play.
Turn off nearby electrical equipment.
To change the AM tuning interval
Press (or USB on the unit)
e AM tuning interval is factory-preset
to 9 kHz (or 10 kHz, for some areas; this
function is not available on the European
model).
to start play.
Play does not start from the first
track.
Set the play mode to Normal Play
mode.
Use buttons on the unit to change the
AM tuning interval.
1
Tune in any AM station, and then
turn off the system.
Files cannot be played back.
USB storage media formatted with file
systems other than FAT16 or FAT32
are unsupported.*
If you use partitioned USB storage
media, only files on the first partition
can be played.
2
While holding down TUNER/BAND
.
, press /
All the AM preset stations are erased.
To reset the interval to the factory
preset, repeat the procedure.
Files that are encrypted or protected by
passwords, etc. cannot be played back.
*
is system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
ꢀꢂGB
Download from Www.Somanuals.com. All Manuals Search And Download.
To improve tuner reception
Turn off CD player power by using the
CD power management function. By
default, CD power is turned on.
Messages
CD/MP3 player, Tuner
Complete!: e preset operation ended
repeatedly to
1
Press FUNCTION
normally.
select the CD function, and then turn
off the system.
Invalid: You pressed an invalid button.
LOCKED: e disc tray does not open.
2
After “STANDBY”stops flashing, press
Contact your nearest Sony dealer.
/
on the unit while holding
No Disc: ere is no disc in the system,
or you have loaded a disc that cannot
be played.
No Step: All of the programmed tracks
or files have been erased.
down /CANCEL
on the unit.
“CD POWER OFF” appears. With CD
player power turned off, disc access
time is increased. To turn on CD
player power, repeat the procedure
until “CD POWER ON” appears.
Over: You have reached the end of the
disc while pressing
playback or pause.
during
To reset the system to factory settings
Push SELECT!: You tried to set the clock
or timer during timer operation.
If the system still does not operate
properly, reset the system to factory
settings.
Push STOP!: You pressed PLAY MODE
during playback.
Use buttons on the unit to reset the
system to its factory default settings.
Reading: e system is reading
information of the disc. Some buttons
are not available.
SET CLOCK!: You tried to select the timer
when the clock is not set.
SET TIMER!: You tried to select the timer
when the Play Timer is not set.
Step Full!: You tried to program more
than 26 tracks or files (steps).
1
Disconnect and reconnect the power
cord, and then turn on the system.
2
Press /CANCEL , DSGX
and
/
at the same time.
All user-configured settings, such as
preset radio stations, timer, and the
clock, are deleted.
TIME NG!: e Play Timer start and end
times are set to the same time.
USB device
ATRAC AD: An ATRAC Audio Device is
connected.
Error: e USB device could not be
recognized or an unknown device is
connected.
Invalid: You have made an invalid or
currently prohibited operation.
No Device: No USB device is connected
or the connected USB device has been
stopped.
Continued
ꢀꢃGB
Download from Www.Somanuals.com. All Manuals Search And Download.
No Step: All of the programmed tracks
or files have been erased.
No Track: No playable file is loaded in
the system.
Not Supported: An unsupported USB
device is connected.
Please Wait: e system is readying for
usage of an USB device.
Reading: e system is recognizing the
USB device.
Removed: e USB device has been
removed.
Step Full!: You tried to program more
than 26 tracks or files (steps).
STORAGE DRIVE: USB storage media is
connected.
Precautions
Discs that this system CAN play
Audio CD
CD-R/CD-RW (audio data/MP3 files)
Discs that this system CANNOT play
CD-ROM
CD-R/CD-RW other than those
recorded in music CD format or MP3
format conforming to ISO9660 Level
1/Level 2, Joliet or multisession
CD-R/CD-RW recorded in
multisession that have not ended by
“closing the session”
CD-R/CD-RW of poor recording
quality, CD-R/CD-RW that have
scratches or are dirty, or CD-R/CD-
RW recorded with an incompatible
recording device
CD-R/CD-RW which is finalized
incorrectly
Discs containing files other than
MPEG 1 Audio Layer-3 (MP3) files
Discs of non-standard shape (for
example, heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink
that feels tacky when touched
Notes on discs
Before playing, wipe the disc with a
cleaning cloth from the center out to
the edge.
Do not clean discs with solvents, such
as benzine thinner, or commercially
available cleaners or anti-static spray
intended for vinyl LPs.
Do not expose discs to direct sunlight
or heat sources such as hot air ducts,
nor leave it in a car parked in direct
sunlight.
ꢀꢄGB
Download from Www.Somanuals.com. All Manuals Search And Download.
On safety
On the speaker system
is speaker system is not magnetically
shielded, and the picture on nearby TV
sets may become magnetically distorted.
In this situation, turn off the TV, wait
15 to 30 minutes, and turn it back on.
If there is no improvement, move the
speakers far away from the TV.
Completely disconnect the power
cord (mains lead) from the wall socket
(mains) if it is not going to be used
for an extended period of time. When
unplugging the unit, always grip the
plug. Never pull the cord itself.
Should any solid object or liquid get
into the system, unplug the system, and
have it checked by qualified personnel
before operating it again.
Cleaning the cabinet
Clean this system with a soſt cloth
slightly moistened with a mild detergent
solution. Do not use any type of abrasive
pad, scouring powder, or solvent, such as
thinner, benzine, or alcohol.
e AC power cord can be changed
only by a qualified service facility.
On placement
Do not place the system in an inclined
position or in locations that are
extremely hot, cold, dusty, dirty, or
humid or lacking adequate ventilation,
or subject to vibration, direct sunlight
or a bright light.
Be careful when placing the unit
or speakers on surfaces that have
been specially treated (for example,
with wax, oil, polish) as staining or
discoloration of the surface may result.
If the system is brought directly
from a cold to a warm location or is
placed in a very damp room, moisture
may condense on the lens inside the
CD player, and cause the system to
malfunction. In this situation, remove
the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On heat buildup
Heat buildup on the unit during
operation is normal and is not cause
for alarm.
Do not touch the cabinet if it has been
used continuously at a high volume
because the cabinet may have become
hot.
Do not obstruct the ventilation holes.
ꢀꢅGB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System: Compact disc and digital audio
system
Specifications
Main unit
Laser Diode Properties
Emission duration: continuous
Laser Output*: Less than 44.6µW
* is output is the value measurement
at a distance of 200mm from the
objective lens surface on the Optical
Pick-up Block with 7mm aperture.
Frequency response: 20 Hz 20 kHz
Signal-to-noise ratio: More than 90 dB
Dynamic range: More than 90 dB
Amplifier section
Canadian model:
DIN power output (rated): 40 + 40
watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
European model:
Tuner section
FM stereo, FM/AM superheterodyne tuner
DIN power output (rated): 40 + 40
watts (6 ohms at 1 kHz, DIN)
Continuous RMS power output
(reference): 50 + 50 watts (6 ohms at
1 kHz, 10% THD)
FM tuner section:
Tuning range
Canadian model:
Music power output (reference): 50 +
50 watts (6 ohms at 1 kHz, 10% THD)
Inputs:
87.5 108.0 MHz (100 kHz step)
European model:
87.5 108.0 MHz (50 kHz step)
Antenna: FM lead antenna
Antenna terminals: 75 ohms unbalanced
Intermediate frequency: 10.7 MHz
AM tuner section:
AUDIO IN (stereo mini jack):
voltage 250 mV, impedance
47 kilohms
(USB) port: Type A, maximum
current 500 mA
Tuning range
Outputs:
Canadian model:
PHONES (stereo mini jack): accepts
headphones of 8 ohms or more
SPEAKER: accepts impedance of
6 ohms
530 1,710 kHz (with 10 kHz tuning
interval)
531 1,710 kHz (with 9 kHz tuning
interval)
European model:
USB section
Supported bit rate
531 1,602 kHz (with 9 kHz tuning
interval)
Antenna: AM loop antenna, external
antenna terminal
MP3 (MPEG 1 Audio Layer-3):
32 320 kbps, VBR
ATRAC: 48 352 kbps
(ATRAC3plus), 66/105/132 kbps
(ATRAC3)
Intermediate frequency: 450 kHz
Speaker
WMA: 32 192 kbps, VBR
AAC: 48 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
Speaker system: 2-way, 2-unit, bass-reflex
type
Speaker units: Woofer 12 cm, cone type,
Tweeter 4 cm, cone type
Nominal impedance: 6 ohms
Dimensions (w/h/d): Approx. 145 × 260 ×
200 mm
ATRAC: 44.1 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Mass: Approx. 2.2 kg net per speaker
ꢀꢆGB
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements
Playable USB devices
You can play back the following Sony
USB devices on this system. Other USB
devices cannot be played back on this
system.
Canadian model: 120 V AC, 60 Hz
European model: 220 240 V AC,
50/60 Hz
Power consumption: 40 watts
Dimensions (w/h/d) (excl. speakers):
Approx. 285 × 120 × 215 mm
Mass (excl. speakers): 2.6 kg
Verified Sony digital music player (as
of January 2007)
Supplied accessories: Remote Commander
(1), R6 (Size AA) batteries (2), AM loop
antenna (1), FM lead antenna (1), Speaker
pads (8)
Design and specifications are subject to
change without notice.
Product name Model name
NW-E103 / E105 /
E107
NW-E205 / E207
Walkman
®
Standby power consumption:
0.5 W
Halogenated flame retardants
are not used in the certain
printed wiring boards.
NW-E303 / E305 /
E307
NW-E403 / E405 /
E407
NW-E503 / E505 /
E507
Halogenated flame retardants
are not used in cabinets.
NW-E002 / E002F /
E003 / E003F / E005 /
E005F
NW-A605 / A607 /
A608
NW-A1000 / A1200 /
A3000
NW-HD5
NW-S603 / S605 /
S703F / S705F / S706F
NW-S202 / S202F /
S203F / S205F
Continued
ꢀꢇGB
Download from Www.Somanuals.com. All Manuals Search And Download.
Verified Sony USB storage media (as of
January 2007)
Product name Model name
MICROVAULT USM512EX / 1GEX /
2GEX
USM128J / 256J / 512J /
1GJ / 2GJ / 4GJ / 8GJ
USM512JX / 1GJX /
2GJX / 4GJX
USM256H / 512H /
1GH / 2GH / 4GH
USD2G / 4G / 5G / 8G
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
ElectronicsSupport/>
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Notes
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
Operation may not always be ensured even
when using these USB devices.
Some of these USB devices may not be
available for purchase in certain areas.
Notes on Walkman
You cannot play back Linear PCM audio on
this system.
You cannot play back the ATRAC Advanced
Lossless audio format on this system.
You cannot play back music recorded directly
to a Walkman without using a computer on
this system.
ꢁ0GB
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ1GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|
