4-234-818-12 (2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number
in the space provided below. Refer to them whenever you call upon your Sony dealer
regarding this product.
Model No. _______________
Serial No. _______________
CMT-EP50
CMT-EP50LIV
© 2001 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Parts Identification
Tape
Loading a tape ..................................... 13
Main unit ............................................... 4
Remote Control ..................................... 5
Playing a tape ...................................... 13
Recording to a tape
— CD Synchro Recording/Recording
Manually ....................................... 14
Getting Started
Hooking up the system .......................... 6
Timer-recording radio programs ......... 15
Inserting two size AAA (R03) batteries
into the remote ................................ 7
Sound Adjustment
Setting the time...................................... 7
Adjusting the sound ............................. 16
Selecting the audio emphasis .............. 16
CD
Loading the CD ..................................... 8
Other features
Playing the CD
Falling asleep to music
— Normal Play/Shuffle Play/Repeat
Play.................................................. 8
— Sleep Timer .............................. 17
Waking up to music
Programing the CD tracks
— Daily Timer .............................. 17
— Program Play .............................. 9
Using the CD display ............................ 9
Additional information
Tuner
Precautions .......................................... 19
Troubleshooting................................... 20
Specifications ...................................... 22
Presetting radio stations....................... 10
Listening to the radio
— Preset Tuning ........................... 11
Using the Radio Data System
* For European model only
(RDS)* .......................................... 11
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Parts Identification
The items are arranged in alphabetical order.
Refer to the pages indicated in parentheses ( ) for details.
Main unit
1
2
3 4 5 6
7
8
wg
wf
9
q;
qa
qs
qd
qf
qg
wd
ws
wa
w;
ql
qk
qh
qj
Cassette compartment qj (13)
CD 4 (8, 9, 14)
DISPLAY wf (9, 11)
Display Window 5 (8, 9, 10)
ENTER ql (7, 9, 10, 12)
ISS 0 (14)
MEGA BASS 8 (16)
MONO STEREO 0 (11)
MUSIC MENU 9 (16)
PHONES jack wa
RDS (European model only)/DIR
w; (12, 13, 14, 15)
Remote sensor wg
BUTTON DESCRIPTIONS
@/1 (power) 1 (7, 11, 15, 18)
TAPE 3 (13)
CD
TIMER indicator 2 (15, 18)
TUNER 6 (10, 11, 14)
TUNER MEM ql (10)
TUNING + qf (10, 11, 12, 15)
TUNING – qg (10, 11, 12, 15)
VOLUME control qd
. m (go back) qg (8, 9)
M > (go forward) qf (8, 9)
nN (play) qa (8, 9)
X (pause) wd (8)
Z PUSH OPEN/CLOSE 7 (8)
x (stop) qs (8, 9)
PLAY MODE w; (8, 9)
PRESET +/– qk (10, 11, 12)
TAPE
M > (fast forward) qf (13)
X (pause) wd (13)
nN (play) qa (13, 14, 15)
z (recording) ws (14, 15)
. m (rewind) qg (13)
Z PUSH OPEN/CLOSE qh (13)
x (stop) qs (13, 14)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
1 2 34
wa
w;
ql
qk
qj
qh
qg
qf
qd
5
6
7
8
9
q;
qa
qs
CD 3 (8, 9, 14)
CLOCK/TIMER qg (7, 15, 17)
DISPLAY qh (9, 11)
MEGA BASS 2 (16)
MUSIC MENU wa (16)
PLAY MODE/RDS (European
model only)/DIR qj (8, 9, 12,
13, 14, 15)
PRESET +/– qk (10, 11)
REPEAT 7 (8)
BUTTON DESCRIPTIONS
M (fast forward) > (go
forward) 0 (8, 9, 13)
. (go back) m (rewind) qa
(8, 9, 13)
X (pause) qs (8, 13)
nN (play) 8 (8, 9, 13, 14, 15)
`/1 (power) 1 (7, 11, 15, 18)
x (stop) 9 (8, 9, 13, 14)
SLEEP qd (17)
TAPE w; (13)
TIMER ON/OFF qf (15, 18)
TUNER/BAND 5 (10, 11, 14)
TUNER MEM/ENTER 6 (7, 9,
10, 12, 15, 17, 18)
TUNING/CLOCK/TIMER +/–
ql (7, 10, 11, 12, 15, 17, 18)
VOLUME +/– 4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Do the following procedure 1 to 3 to hook up your system using the supplied cords and
accessories.
AM loop
antenna
FM antenna
2
2
1
3
Right speaker
Left speaker
1 Connect the speakers.
2 Connect the FM/AM antennas.
Connect the speaker cords to the SPEAKER
terminals as shown below.
Set up the AM loop antenna, then connect
it.
SPEAKER
(IMPED
ANCE USE 8
Ω
)
Insert only the
stripped portion.
Red (3)
L
Jack type A
Extend the FM lead
R
antenna horizontally.
AM loop antenna
Black (#)
T
N
A
M
F
Ω
5
7
L
A
I
X
A
O
C
T
N
A
M
A
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Jack type B
Setting the time
Extend the FM lead
antenna horizontally.
AM loop antenna
1 Turn on the system.
2 Press CLOCK/TIMER on the remote.
When you set the clock for the first time, go
to step 5.
FM ANT
Ω
75
AXIAL
CO
AM ANT
3 Press CLOCK/TIMER on the remote
repeatedly until “SET CLK” appears in
the display.
3 Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
4 Press TUNER MEM/ENTER on the
remote.
5 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the hour.
To turn on the system, press [/ 1 (power).
6 Press TUNER MEM/ENTER on the
remote.
Inserting two size AAA
(R03) batteries into the
remote
7 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the minute.
8 Press TUNER MEM/ENTER on the
remote.
To reset the system clock
Start over from step 1.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Other Operations
Do this
To
Loading the CD
Press x.
Stop playback
Pause
1 Press Z PUSH OPEN/CLOSE down to
Press X.
open the lid of the CD compartment.
Press again to resume play.
Press M > (to go forward) or
. m (to go back).
Select a track
2 Place a CD with the label side up on the
compartment.
During play, press and hold M
> (to go forward) or . m
(to go back). Release it when you
find the desired point.
Find a point
in a track
When you play a CD
single (8 cm CD),
place it on the inner
circle of the
Press REPEAT on the remote
during play until “REPEAT” or
“REPEAT 1” appears.
Play repeatedly
(Repeat Play)
compartment.
REPEAT: For all the tracks on the
CD up to five times.
REPEAT 1: For a single track only.
To cancel playing repeatedly, press
REPEAT on the remote until
“REPEAT” or “REPEAT 1”
disappears.
3 Press Z PUSH OPEN/CLOSE down to
close the lid of the CD compartment.
Playing the CD
Press Z PUSH OPEN/CLOSE.
Remove the CD
— Normal Play/Shuffle Play/Repeat
Play
This system lets you play the CD in different
play modes.
Playing time
Track number
1 Press CD.
2 Press PLAY MODE (PLAY MODE/RDS/
DIR on the remote) repeatedly until the
mode you want appears in the display.
To play
Select
The CD in original order.
No display
SHUFFLE
The tracks on the CD in random
order.
The tracks on the CD in the order
you want them to be played. (See
“Programing the CD tracks” on
page 9.)
PROGRAM
3 Press nN.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Programing the CD tracks
Using the CD display
— Program Play
Press DISPLAY repeatedly.
The display changes as follows:
You can make a program of up to 32 tracks in
the order you want them to be played.
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current CD t Clock
display (for five seconds) t Elapsed playing
time on the current track t ...
1 Press CD, then place a CD.
2 Press PLAY MODE (PLAY MODE/RDS/
DIR on the remote) repeatedly until
“PROGRAM” appears in the display.
3 Press . m or M > until the
In the stop mode
desired track appears in the display.
Total number of tracks and total playing time
t Clock display (for five seconds) t Total
number of tracks and total playing time t ...
Preset number
Selected track number
(including selected track)
4 Press ENTER (TUNER MEM/ENTER on
the remote).
The track is programed. The program step
number appears.
5 To program additional tracks, repeat
steps 3 to 4.
6 Press nN.
Program Play starts.
To
Do this
Cancel Program
Play
Press PLAY MODE (PLAY
MODE/RDS/DIR on the remote)
until “PROGRAM” disappears
from the display.
Add a track to
the end of the
program
Do step 3 and 4 with Program Play
stopped.
Erase the entire
program
Press x once, when Program Play
is in stop mode, or twice during
Program Play.
Tip
The program you made remains in the system’s
memory even after it has been played back. Press CD,
then press nN to play the same program again.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
To tune in a station with a weak
signal
Press TUNING (TUNING/CLOCK/TIMER on
the remote) + or – repeatedly in step 2 to tune
in the station manually.
Presetting radio stations
You can preset up to 30 stations.
1 Press TUNER (TUNER/BAND on the
To set another station to an existing
preset number
Start over from step 1. After step 3, press
PRESET + or – repeatedly to select the preset
number where you want to store the other
station and the press ENTER (TUNER MEM/
ENTER on the remote).
remote) repeatedly to select FM or AM.
2 Press and hold TUNING (TUNING/
CLOCK/TIMER on the remote) + or –
until the frequency indication starts to
change, then release it.
Scanning stops automatically when the
system tunes in a station. “STEREO” (for a
stereo program) appears.
If it doesn’t stop automatically, press
TUNING (TUNING/CLOCK/TIMER on
the remote) + or – repeatedly to tune in a
station manually.
You can preset a new station in the selected
preset number.
To erase all preset stations
1 Press and hold TUNER MEM (TUNER
MEM/ENTER on the remote) until
“ERASE” and “PRESET” appear alternately.
2 Press ENTER (TUNER MEM/ENTER on
the remote).
All preset stations are cleared.
To change the AM tuning interval
(except for the European model)
Disconnect the power cord from the wall outlet
first, and then set the AM FREQ STEP switch
at the rear to 9 kHz or 10 kHz.
3 Press TUNER MEM (TUNER MEM/
ENTER on the remote).
A preset number appears in the display.
The stations are stored from preset number
1.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Preset number
4 Press ENTER (TUNER MEM/ENTER on
the remote).
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
–– Preset Tuning
Using the Radio Data
System (RDS)
(European model only)
Preset radio stations in the tuner’s memory
first.
What is the Radio Data System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only on FM stations.*
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select FM or AM.
2 Press PRESET + or – repeatedly to tune
in the desired preset station.
The preset number appears in the display
for a few seconds.
When only one station is preset, only that
station is tuned.
Note
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal strength is weak.
To
Do this
Turn off the radio Press ?/1.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
To listen to non-preset radio stations
Use manual or automatic tuning in step 2.
For manual tuning, press TUNING (TUNING/
CLOCK/TIMER on the remote) + or –
repeatedly.
Receiving RDS broadcasts
For automatic tuning, press and hold TUNING
(TUNING/CLOCK/TIMER on the remote) +
or –.
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, “RDS” appears in the display.
Tips
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
• When an FM program is noisy, set MONO
STEREO to MONO so that “MONO” appears in
the display. There will be no stereo effect, but the
reception will improve.
• To improve broadcast reception, adjust the
antennas.
Frequency t RDS name* t RDS TEXT*
t RDS type* t Clock display (for five
seconds) t Frequency t ...
• You can change the display into the clock display
(for five seconds) by pressing DISPLAY.
* If the RDS broadcast is not received, the RDS
name, RDS TEXT and RDS type may not appear in
the display.
continued
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS)
(continued)
Listening to a traffic
information
When the tuner receives traffic information
signal, “TRAFFIC INFORMATION” will be
scrolled in the display.
Locating a station by
program type (PTY)
You can locate a station you want by selecting
a program type. The system tunes in the type of
programs currently being broadcast from the
RDS stations stored in the tuner’s preset
memory.
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly until “INFO
OFF” or “INFO ON” appears while
listening to an FM program.
2 Press ENTER (TUNER MEM/ENTER on
The types of programs include NEWS,
AFFAIRS (current news), INFO, SPORT,
EDUCATE (education programs), DRAMA,
CULTURE, SCIENCE, VARIED (interviews,
games and comedy), POP M, ROCK M, EASY
M, LIGHT M, CLASSICS, OTHER M,
WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M , DOCUMENT, TEST
ALARM and NONE (any programs not defined
above).
the remote) to set “INFO ON”.
Setting the time to the
broadcast
You can set the time to the clock information
received.
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly until “SYNC
OFF” or “SYNC ON” appears while
listening to an FM program.
2 Press ENTER (TUNER MEM/ENTER on
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) while listening to the
radio.
the remote) to set “SYNC ON”.
2 Press PRESET + or – repeatedly to
select the program type you want.
3 Press and hold TUNING (TUNING/
CLOCK/TIMER on the remote) + or –.
When the tuner receives a program, “PTY”
flashes.
Tip
“TYPE NOT FOUND” appears when the program
type you select is not currently being broadcast.
To cancel PTY
Press RDS/DIR (PLAY MODE/RDS/DIR on
the remote) again.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
Finding the beginning of a
track (AMS*)
Loading a tape
During playback, press . m or M >.
1 Press TAPE.
The tape is wound or rewound to the beginning
of the next or current track, and play will start
automatically. The search direction, “+”
(forward) or “–” (back), and “1” appear in the
display.
2 Press Z PUSH OPEN/CLOSE.
3 Insert a tape in deck with the side you
want to play/record facing forward.
* AMS (Automatic Music Sensor)
Tip
Insert with the side
you want to play/
You can change the display into the clock display (for
five seconds) by pressing DISPLAY.
record facing forward.
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between tracks is less
than 4 seconds long.
– If completely different information is recorded on
the left and right channels.
– When there are continuous sections of extremely
low level or low frequency sound (like those of a
baritone sax).
Playing a tape
You can use TYPE I (normal), TYPE II (CrO2
)
or TYPE IV (metal) tape.
– When the system is placed near a television. (In this
case, we recommend moving the system farther
away from the television or turning off the
television.)
1 Load a recorded tape.
2 Press TAPE.
3 Press RDS/DIR (PLAY MODE/RDS/DIR
on the rmote) repeatedly to select g
to play one side, h to play both sides,
or j* to play both sides repeatedly.
* The tape automatically stops after playing
back five times.
4 Press nN.
Press nN again to play the reverse
side.
Press
To
x
Stop play
Pause
X
Press again to resume play.
With the tape stopped, press
. m/M >
Fast-forward or rewind
Remove the cassette
Z PUSH OPEN/CLOSE
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording to a tape
–– CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
Steps
Recording from a CD
(CD Synchro Recording)
Recording from the radio
1
2
Load a blank tape.
Press CD.
Press TUNER (TUNER/BAND on the
remote).
3
4
Load the CD you want to record.
Tune in the station you want to record.
Press z.
The deck stands by for recording.
5
6
Press nN, if you want to switch the direction.
Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select g
to record on one side, h to record on both sides.
7
Press z again.
Recording starts.
To stop recording
Press x.
Tips
• For recording from a CD to a tape manually, you
can press . m or M > to select tracks
during recording pause mode (after step 4 and
before step 6).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
• When an AM program is noisy, set ISS to select the
position that most decreases the noise.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Insert a recordable tape with the side
you want to record on facing towards
you.
Timer-recording radio
programs
You can record a preset radio station from a
specified time.
8 Press z.
9 Press nN, if you want to switch the
direction.
To timer-record, you must preset the radio
station (see “Presetting radio stations” on page
10) and set the clock (see “Setting the time” on
page 7) beforehand.
10Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly to select g
to record on one side, h to record on
both sides.
1 Tune in the preset radio station that
you want to record from (see “Listening
to the radio” on page 11).
11Press ?/1 to turn off the system.
2 Press CLOCK/TIMER on the remote
repeatedly until “SET TMR” appears,
then press TUNER MEM/ENTER on the
remote.
Do this
To
Turn on the system and then
start over from step 1 when
the TIMER indicator
appears.
Check or change the
setting
“ON” appears, and the hour indication
flashes.
Press TIMER ON/OFF on
the remote until the TIMER
indicator goes on.
Activate the timer
operation
3 Set the starting time.
Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the hour,
then press TUNER MEM/ENTER on the
remote.
Press TIMER ON/OFF on
the remote until the TIMER
indicator goes off.
Cancel the timer
operation
The minute indication begins flashing next.
Notes
Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the minute,
then press TUNER MEM/ENTER on the
remote.
• If the system is in the recording or recording-pause
mode at the preset time, the timer recording will not
be made.
• If the system is playing back a tape at the preset
time, the system will switch to the tuner, but the
timer recording will not be made.
The hour indication flashes again.
4 Set the time to stop the recording
following the procedure in step 3.
5 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly until “RECORD”
appears, then press TUNER MEM/
ENTER on the remote.
The TIMER indicator lights up.
6 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to adjust the
volume* for listening to the radio when
it is activated by the timer, then press
TUNER MEM/ENTER on the remote.
* This does not affect the recording volume; it
only adjusts the volume for when the radio turns
on at the preset time.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
Adjusting the sound
Press MEGA BASS.
“MEGA BASS” appears in the display. To
return to normal sound, press the button again.
Selecting the audio
emphasis
Selecting the preset effect from the
music menu
Press MUSIC MENU repeatedly to select the
preset effect you desire.
Each time you press the button, the display
changes as follows:
ROCK t POP t JAZZ t FLAT* t
ROCK t ...
* “FLAT” is displayed for a few seconds.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Other features
Waking up to music
— Daily Timer
Falling asleep to music
— Sleep Timer
You can wake up to music at a preset time
every day. Make sure you have set the clock
(see page 7).
You can set the system to turn off after certain
amount of time, so that you can fall asleep to
music.
1 Prepare the sound source you want to
Press SLEEP on the remote.
play.
Every time you press the button, the minute
display (the turn-off time) changes as follows:
• CD: Load a CD.
• Tape: Insert a tape with the side you
90 t 80 t 70 t … t 10 t OFF t 90
want to play on facing towards you.
t …
• Radio: Tune in the preset station you
While the Sleep Timer is on, “TIMER” flashes
want (see page 10).
in the display.
2 Press CLOCK/TIMER on the remote
repeatedly until “SET TMR” appears,
then press TUNER MEM/ENTER on the
remote.
To
Press
Check the
SLEEP on the remote once.
“ON” appears, and the hour indication
remaining time
flashes.
Change the
time to turn off
SLEEP on the remote repeatedly
to select the time you want.
3 Set the starting time.
Cancel the Sleep SLEEP on the remote repeatedly
Timer function
until “SLEEP OFF” appears.
Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the hour,
then press TUNER MEM/ENTER on the
remote.
The minute indication begins flashing next.
Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly to set the minute,
then press TUNER MEM/ENTER on the
remote.
The hour indication flashes again.
4 Set the time to stop the playback
following the procedure in step 3.
5 Press TUNING/CLOCK/TIMER + or – on
the remote repeatedly until the music
source you want appears, and then
press TUNER MEM/ENTER on the
remote.
The display changes as follows:
TUNER t RECORD (tuner) t CD t
TAPE t TUNER t …
The TIMER indicator lights up.
continued
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Waking up to music (continued)
6 Press TUNER MEM/ENTER on the
remote.
The type of timer followed by the start time,
stop time, and the music source, appear,
then the original display appears.
7 Press TUNING/CLOCK/TIMER + or – on
the remote to adjust the volume, then
press TUNER MEM/ENTER on the
remote.
8 Press ?/1 to turn off the system.
To
Do this
Check or change
the setting
Turn on the system and then
start over from step 1 when the
TIMER indicator appears.
Activate the timer
operation
Press TIMER ON/OFF on the
remote until the TIMER
indicator goes on.
Cancel the timer
Press TIMER ON/OFF on the
remote until the TIMER
indicator goes off.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not
operate properly. Remove the CD and leave the
system turned on for about an hour until the
moisture evaporates.
Precautions
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
• When you move the system, take out any discs.
On safety
If you have any questions or problems concerning
your stereo system, please consult your nearest Sony
dealer.
• The system is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the system itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have the
component checked by qualified personnel before
operating it any further.
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents.
• Do not expose the CD to direct sunlight or heat
sources.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this system. Attempting to
do so may damage the system. Do not use such
discs.
• The AC power cord must be changed only at a
qualified service shop.
On placement
Note on CD-R/CD-RW playback
• Place the system in a location with adequate
ventilation to prevent heat build-up the system.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt., recording
condition or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording cannot be played back.
– Dusty or dirty
– Very humid
– Vibrating
– Subject to direct sunlight.
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
• Use caution when placing the unit or speakers on
surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloration of the
surface may result.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
On heat buildup
– Although the system heats up during operation, this
is not malfunction.
– Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
Break off the
cassette tab of
side A
If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
To prevent a malfunction, do not cover the ventilation
hole for the cooling fan.
continued
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions (continued)
Troubleshooting
If you have any problem using this system, use
the following check list.
Before placing a cassette in the tape
deck
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
Should any problem persist, consult your
nearest Sony dealer.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
General
The clock setting/radio presetting/timer is
canceled.
Cleaning the tape heads
• The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
— “Setting the time” on page 7
— “Presetting radio stations” on page 10
If you have set the timer, also redo “Timer-
recoding radio programs” on page 15 and
“Waking up to music” on page 17.
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
There is no sound.
• Turn VOLUME clockwise and hold.
• The headphones are connected.
• Insert only the stripped portion of the speaker
cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The clock indication does not show the correct
time.
• A power interruption occurred. Set the clock and
timer settings again.
The timer does not function.
• Set the clock correctly.
• You cannot activate the Timer-recording and
Daily Timer at the same time.
• When you used the Sleep Timer, Daily Timer
and Timer-recording will not turn on the system
until the Sleep Timer turns it off.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Deck
The remote does not function.
• There is an obstacle between the remote and the
system.
The tape does not record.
• No tape in the cassette compartment.
• The tab has been removed from the cassette.
• The tape has reeled to the end.
• The remote is not pointing in the direction of the
system’s sensor.
• The batteries have run down. Replace the
batteries.
The tape does not record nor play or there is a
decrease in sound level.
The color irregularity on a TV screen persists.
• The heads are dirty. Clean them (see “Cleaning
the tape heads” on page 20).
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 20).
The tape does not erase completely.
Speakers
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 20).
Sound comes from one channel or unbalanced
left and right volume.
• Check the speaker connection and speaker
placement.
There is excessive wow or flutter, or the sound
drops out.
Sound lacks bass.
• The capstans or pinch rollers are dirty. Clean
them (see “Cleaning the tape heads” on page 20).
• Check that the speaker’s + and – terminals are
connected correctly.
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 20).
CD Player
The CD compartment does not close.
• The CD is not placed properly.
The CD will not play.
Tuner
• The CD is not lying flat in the CD compartment.
• The CD is dirty.
Noise is heard.
• Adjust the antennas.
• The CD is inserted label side down.
• Moisture condensation has built up. Remove the
CD and leave the system turned on for about an
hour until the moisture evaporates.
A stereo FM program cannot be received in
stereo.
• Set MONO STEREO so that “STEREO”
appears.
Messages
The following message may appear in the
display during operations.
NO DISC
• There is no disc on the CD compartment.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System
Specifications
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ=780 nm)
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Emission duration:
continuous
Frequency response
20 Hz - 20 kHz ( 0.5 dB)
Tape player section
with 8 Ω loads both channels driven, from 120
- 10,000 Hz; rates 12 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
Recording system
Frequency response
4-track 2-channel stereo
50 - 13 000 Hz ( 3 dB),
using Sony TYPE I
cassette
Wow and flutter
0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
0.2% W.Peak (DIN)
Amplifier section Canadian model:
Continuous RMS power output (reference)
12 + 12 W
Tuner section
FM stereo, FM/AM superheterodyne tuner
(8 Ω at 1 kHz, 10% THD)
FM tuner section
Tuning range
Antenna
Antenna terminal
Intermediate frequency
European model:
87.5 - 108.0 MHz
FM lead antenna
75 Ω coaxial
DIN power output (rated) 11 + 11 W
(8 Ω at 1 kHz, DIN)
Continuous RMS power output (reference)
12 + 12 W
10.7 MHz
(8 Ω at 1 kHz, 10% THD)
Music power output (reference)
27 + 27 W
AM tuner section
Tuning range
Pan-American model:
530 - 1 710 kHz
(with the interval set at
10 kHz)
Other model:
The following measured at AC 230 V, 50/60 Hz
DIN power output (rated) 11 + 11 W
(8 Ω at 1 kHz, DIN)
531 - 1 710 kHz
(with the interval set at
9 kHz)
531 -1 602 kHz
(with the interval set at
9 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
530 - 1 710 kHz
(with the interval set at
10 kHz)
Continuous RMS power output (reference)
12 + 12 W
European model:
Other models:
(8 Ω at 1 kHz, 10% THD)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
Accepts headphones of
8 Ω or more
Accepts impedance of 8 to
16 Ω
Antenna
Antenna terminal
Intermediate frequency
AM loop antenna
External antenna terminal
450 kHz
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker
Speaker system
Speaker units
Bass-reflex type
Full range 10 cm, cone
type
Nominal impedance
Dimensions (w/h/d)
Mass
8 Ω
Approx. 145 × 238 × 171 mm
Approx. 1.4 kg net per
speaker
General
Power requirements
North American model: 120 V AC, 60 Hz
European model:
Mexican model:
Argentine model:
Hong Kong model:
Other models:
230 V AC, 50/60 Hz
120 V AC, 60 Hz
220 V AC, 50/60 Hz
230 V AC, 50/60 Hz
230 V AC, 50/60 Hz
Power consumption
U.S.A. model:
Canadian model:
European model:
35 W
35 W
40 W
0.9 W (in the standby
mode)
40 W
Other models:
Dimensions (w/h/d):
Mass:
Approx. 145 × 238 × 234 mm
Approx. 3.4 kg
Supplied accessories:
AM loop antenna (1)
Remote Commander (1)
Batteries (2)
FM lead antenna (1)
Design and specifications are subject to change
without notice.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|