Sony Stereo System CMT EP50 User Manual

4-234-818-11 (2)  
Micro Hi-Fi  
Component  
System  
Operating Instructions  
Owner’s Record  
The model and serial numbers are located on the bottom. Record the serial number  
in the space provided below. Refer to them whenever you call upon your Sony dealer  
regarding this product.  
Model No. _______________  
Serial No. _______________  
CMT-EP50  
© 2001 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Parts Identification  
Tape  
Loading a tape ..................................... 13  
Main unit ............................................... 4  
Remote Control ..................................... 5  
Playing a tape ...................................... 13  
Recording to a tape  
— CD Synchro Recording/Recording  
Manually ....................................... 14  
Getting Started  
Hooking up the system .......................... 6  
Timer-recording radio programs ......... 15  
Inserting two size AAA (R03) batteries  
into the remote ................................ 7  
Sound Adjustment  
Setting the time...................................... 7  
Adjusting the sound ............................. 16  
Selecting the audio emphasis .............. 16  
CD  
Loading the CD ..................................... 8  
Other features  
Playing the CD  
Falling asleep to music  
— Normal Play/Shuffle Play/Repeat  
Play.................................................. 8  
— Sleep Timer .............................. 17  
Waking up to music  
Programing the CD tracks  
— Daily Timer .............................. 17  
— Program Play .............................. 9  
Using the CD display ............................ 9  
Additional information  
Tuner  
Precautions .......................................... 19  
Troubleshooting................................... 20  
Specifications ...................................... 22  
Presetting radio stations....................... 10  
Listening to the radio  
— Preset Tuning ........................... 11  
Using the Radio Data System  
* For European model only  
(RDS)* .......................................... 11  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts Identification  
The items are arranged in alphabetical order.  
Refer to the pages indicated in parentheses ( ) for details.  
Main unit  
1
2
3 4 5 6  
7
8
wg  
wf  
9
q;  
qa  
qs  
qd  
qf  
qg  
wd  
ws  
wa  
w;  
ql  
qk  
qh  
qj  
Cassette compartment qj (13)  
CD 4 (8, 9, 14)  
DISPLAY wf (9, 11)  
Display Window 5 (8, 9, 10)  
ENTER ql (7, 9, 10, 12)  
ISS 0 (14)  
MEGA BASS 8 (16)  
MONO STEREO 0 (11)  
MUSIC MENU 9 (16)  
PHONES jack wa  
RDS (European model only)/DIR  
w; (12, 13, 14, 15)  
Remote sensor wg  
BUTTON DESCRIPTIONS  
@/1 (power) 1 (7, 11, 15, 18)  
TAPE 3 (13)  
CD  
TIMER indicator 2 (15, 18)  
TUNER 6 (10, 11, 14)  
TUNER MEM ql (10)  
TUNING + qf (10, 11, 12, 15)  
TUNING – qg (10, 11, 12, 15)  
VOLUME control qd  
. m (go back) qg (8, 9)  
M > (go forward) qf (8, 9)  
nN (play) qa (8, 9)  
X (pause) wd (8)  
Z PUSH OPEN/CLOSE 7 (8)  
x (stop) qs (8, 9)  
PLAY MODE w; (8, 9)  
PRESET +/– qk (10, 11, 12)  
TAPE  
M > (fast forward) qf (13)  
X (pause) wd (13)  
nN (play) qa (13, 14, 15)  
z (recording) ws (14, 15)  
. m (rewind) qg (13)  
Z PUSH OPEN/CLOSE qh (13)  
x (stop) qs (13, 14)  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
1 2 34  
wa  
w;  
ql  
qk  
qj  
qh  
qg  
qf  
qd  
5
6
7
8
9
q;  
qa  
qs  
CD 3 (8, 9, 14)  
CLOCK/TIMER qg (7, 15, 17)  
DISPLAY qh (9, 11)  
MEGA BASS 2 (16)  
MUSIC MENU wa (16)  
PLAY MODE/RDS (European  
model only)/DIR qj (8, 9, 12,  
13, 14, 15)  
PRESET +/– qk (10, 11)  
REPEAT 7 (8)  
BUTTON DESCRIPTIONS  
M (fast forward) > (go  
forward) 0 (8, 9, 13)  
. (go back) m (rewind) qa  
(8, 9, 13)  
X (pause) qs (8, 13)  
nN (play) 8 (8, 9, 13, 14, 15)  
`/1 (power) 1 (7, 11, 15, 18)  
x (stop) 9 (8, 9, 13, 14)  
SLEEP qd (17)  
TAPE w; (13)  
TIMER ON/OFF qf (15, 18)  
TUNER/BAND 5 (10, 11, 14)  
TUNER MEM/ENTER 6 (7, 9,  
10, 12, 15, 17, 18)  
TUNING/CLOCK/TIMER +/–  
ql (7, 10, 11, 12, 15, 17, 18)  
VOLUME +/– 4  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Hooking up the system  
Do the following procedure 1 to 3 to hook up your system using the supplied cords and  
accessories.  
AM loop  
antenna  
FM antenna  
2
2
1
3
Right speaker  
Left speaker  
1 Connect the speakers.  
2 Connect the FM/AM antennas.  
Connect the speaker cords to the SPEAKER  
terminals as shown below.  
Set up the AM loop antenna, then connect  
it.  
SPEAKER  
(IMPED  
ANCE USE 8  
)
Insert only the  
stripped portion.  
Red (3)  
L
Jack type A  
Extend the FM lead  
R
antenna horizontally.  
AM loop antenna  
Black (#)  
T
N
A
M
F
5
7
L
A
I
X
A
O
C
T
N
A
M
A
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Note  
Jack type B  
If you do not use the remote for a long period of time,  
remove the batteries to avoid possible damage from  
battery leakage.  
Extend the FM lead  
antenna horizontally.  
AM loop antenna  
FM ANT  
75  
Setting the time  
AXIAL  
CO  
AM ANT  
1 Turn on the system.  
2 Press CLOCK/TIMER on the remote.  
When you set the clock for the first time, go  
to step 5.  
3 Connect the power cord to a wall outlet.  
If the supplied adaptor on the plug does not  
fit your wall outlet, detach it from the plug  
(only for models equipped with the  
adaptor).  
3 Press CLOCK/TIMER on the remote  
repeatedly until “SET CLK” appears in  
the display.  
To turn on the system, press [/ 1 (power).  
4 Press TUNER MEM/ENTER on the  
remote.  
To attach the speaker pads  
Attach the supplied speaker pads to the bottom  
of the speakers to stabilize the speakers and  
prevent them from slipping.  
5 Press TUNING/CLOCK/TIMER + or – on  
the remote repeatedly to set the hour.  
6 Press TUNER MEM/ENTER on the  
remote.  
7 Press TUNING/CLOCK/TIMER + or – on  
the remote repeatedly to set the minute.  
8 Press TUNER MEM/ENTER on the  
remote.  
To reset the system clock  
Start over from step 1.  
Note  
The clock settings are canceled when you disconnect  
the power cord or if a power failure occurs.  
Inserting two size AAA  
(R03) batteries into the  
remote  
Tip  
When the remote no longer operates the system,  
replace both batteries with new ones.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
Other Operations  
Do this  
Loading the CD  
To  
Press x.  
Stop playback  
Pause  
1 Press Z PUSH OPEN/CLOSE down to  
Press X.  
Press again to resume play.  
open the lid of the CD compartment.  
Press M > (to go forward) or  
. m (to go back).  
Select a track  
2 Place a CD with the label side up on the  
compartment.  
During play, press and hold M  
> (to go forward) or . m  
(to go back). Release it when you  
find the desired point.  
Find a point  
in a track  
When you play a CD  
single (8 cm CD),  
place it on the inner  
circle of the  
Press REPEAT on the remote  
during play until REPEATor  
REPEAT 1appears.  
Play repeatedly  
(Repeat Play)  
compartment.  
REPEAT: For all the tracks on the  
CD up to five times.  
REPEAT 1: For a single track only.  
To cancel playing repeatedly, press  
REPEAT on the remote until  
REPEATor REPEAT 1”  
disappears.  
3 Press Z PUSH OPEN/CLOSE down to  
close the lid of the CD compartment.  
Playing the CD  
Press Z PUSH OPEN/CLOSE.  
Remove the CD  
Normal Play/Shuffle Play/Repeat  
Play  
This system lets you play the CD in different  
play modes.  
Playing time  
Track number  
1 Press CD.  
2 Press PLAY MODE (PLAY MODE/RDS/  
DIR on the remote) repeatedly until the  
mode you want appears in the display.  
To play  
Select  
The CD in original order.  
No display  
SHUFFLE  
The tracks on the CD in random  
order.  
The tracks on the CD in the order  
you want them to be played. (See  
Programing the CD trackson  
page 9.)  
PROGRAM  
3 Press nN.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Programing the CD tracks  
Using the CD display  
Program Play  
Press DISPLAY repeatedly.  
The display changes as follows:  
You can make a program of up to 32 tracks in  
the order you want them to be played.  
During normal play  
Elapsed playing time on the current track t  
Remaining time on the current track t  
Remaining time on the current CD t Clock  
display (for five seconds) t Elapsed playing  
time on the current track t ...  
1 Press CD, then place a CD.  
2 Press PLAY MODE (PLAY MODE/RDS/  
DIR on the remote) repeatedly until  
PROGRAMappears in the display.  
3 Press . m or M > until the  
In the stop mode  
desired track appears in the display.  
Total number of tracks and total playing time  
t Clock display (for five seconds) t Total  
number of tracks and total playing time t ...  
Preset number  
Selected track number  
(including selected track)  
4 Press ENTER (TUNER MEM/ENTER on  
the remote).  
The track is programed. The program step  
number appears.  
5 To program additional tracks, repeat  
steps 3 to 4.  
6 Press nN.  
Program Play starts.  
To  
Do this  
Cancel Program  
Play  
Press PLAY MODE (PLAY  
MODE/RDS/DIR on the remote)  
until PROGRAMdisappears  
from the display.  
Add a track to  
the end of the  
program  
Do step 3 and 4 with Program Play  
stopped.  
Erase the entire  
program  
Press x once, when Program Play  
is in stop mode, or twice during  
Program Play.  
Tip  
The program you made remains in the systems  
memory even after it has been played back. Press CD,  
then press nN to play the same program again.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner  
To tune in a station with a weak  
signal  
Press TUNING (TUNING/CLOCK/TIMER on  
the remote) + or repeatedly in step 2 to tune  
in the station manually.  
Presetting radio stations  
You can preset up to 30 stations.  
1 Press TUNER (TUNER/BAND on the  
To set another station to an existing  
preset number  
Start over from step 1. After step 3, press  
PRESET + or repeatedly to select the preset  
number where you want to store the other  
station and the press ENTER (TUNER MEM/  
ENTER on the remote).  
remote) repeatedly to select FM or AM.  
2 Press and hold TUNING (TUNING/  
CLOCK/TIMER on the remote) + or –  
until the frequency indication starts to  
change, then release it.  
Scanning stops automatically when the  
system tunes in a station. STEREO(for a  
stereo program) appears.  
If it doesnt stop automatically, press  
TUNING (TUNING/CLOCK/TIMER on  
the remote) + or repeatedly to tune in a  
station manually.  
You can preset a new station in the selected  
preset number.  
To erase all preset stations  
1 Press and hold TUNER MEM (TUNER  
MEM/ENTER on the remote) until  
ERASEand PRESETappear alternately.  
2 Press ENTER (TUNER MEM/ENTER on  
the remote).  
All preset stations are cleared.  
To change the AM tuning interval  
(except for the European model)  
Disconnect the power cord from the wall outlet  
first, and then set the AM FREQ STEP switch  
at the rear to 9 kHz or 10 kHz.  
3 Press TUNER MEM (TUNER MEM/  
ENTER on the remote).  
A preset number appears in the display.  
The stations are stored from preset number  
1.  
Tip  
The preset stations are retained for half a day even if  
you unplug the power cord or if a power failure  
occurs.  
Preset number  
4 Press ENTER (TUNER MEM/ENTER on  
the remote).  
The station is stored.  
5 Repeat steps 1 to 4 to store other  
stations.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
–– Preset Tuning  
Using the Radio Data  
System (RDS)  
(European model only)  
Preset radio stations in the tuners memory  
first.  
What is the Radio Data System?  
Radio Data System (RDS) is a broadcasting  
service that allows radio stations to send  
additional information along with the regular  
program signal. This tuner offers convenient  
RDS features like station name display and  
location of stations by program type. RDS is  
available only on FM stations.*  
1 Press TUNER (TUNER/BAND on the  
remote) repeatedly to select FM or AM.  
2 Press PRESET + or repeatedly to tune  
in the desired preset station.  
The preset number appears in the display  
for a few seconds.  
When only one station is preset, only that  
station is tuned.  
Note  
RDS may not work properly if the station you are  
tuned in is not transmitting the RDS signal properly  
or if the signal strength is weak.  
To  
Do this  
Turn off the radio Press ?/1.  
* Not all FM stations provide RDS service, nor do  
they provide the same types of services. If you are  
not familiar with the RDS system, check with your  
local radio stations for details on RDS services in  
your area.  
To listen to non-preset radio stations  
Use manual or automatic tuning in step 2.  
For manual tuning, press TUNING (TUNING/  
CLOCK/TIMER on the remote) + or –  
repeatedly.  
Receiving RDS broadcasts  
Simply select a station from the FM band.  
When you tune in a station that provides RDS  
services, RDSappears in the display.  
For automatic tuning, press and hold TUNING  
(TUNING/CLOCK/TIMER on the remote) +  
or .  
Tips  
To check the RDS information  
Each time you press DISPLAY, the display  
changes as follows:  
When an FM program is noisy, set MONO  
STEREO to MONO so that MONOappears in  
the display. There will be no stereo effect, but the  
reception will improve.  
To improve broadcast reception, adjust the  
antennas.  
Frequency t RDS name* t RDS TEXT*  
t RDS type* t Clock display (for five  
seconds) t Frequency t ...  
You can change the display into the clock display  
(for five seconds) by pressing DISPLAY.  
* If the RDS broadcast is not received, the RDS  
name, RDS TEXT and RDS type may not appear in  
the display.  
continued  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Radio Data System (RDS)  
(continued)  
Listening to a traffic  
information  
When the tuner receives traffic information  
signal, TRAFFIC INFORMATIONwill be  
scrolled in the display.  
Locating a station by  
program type (PTY)  
You can locate a station you want by selecting  
a program type. The system tunes in the type of  
programs currently being broadcast from the  
RDS stations stored in the tuners preset  
memory.  
1 Press RDS/DIR (PLAY MODE/RDS/DIR  
on the remote) repeatedly until INFO  
OFFor INFO ONappears while  
listening to an FM program.  
2 Press ENTER (TUNER MEM/ENTER on  
The types of programs include NEWS,  
AFFAIRS (current news), INFO, SPORT,  
EDUCATE (education programs), DRAMA,  
CULTURE, SCIENCE, VARIED (interviews,  
games and comedy), POP M, ROCK M, EASY  
M, LIGHT M, CLASSICS, OTHER M,  
WEATHER, FINANCE, CHILDREN,  
SOCIAL, RELIGION, PHONE IN, TRAVEL,  
LEISURE, JAZZ, COUNTRY, NATION M,  
OLDIES, FOLK M , DOCUMENT, TEST  
ALARM and NONE (any programs not defined  
above).  
the remote) to set INFO ON.  
Setting the time to the  
broadcast  
You can set the time to the clock information  
received.  
1 Press RDS/DIR (PLAY MODE/RDS/DIR  
on the remote) repeatedly until SYNC  
OFFor SYNC ONappears while  
listening to an FM program.  
2 Press ENTER (TUNER MEM/ENTER on  
1 Press RDS/DIR (PLAY MODE/RDS/DIR  
on the remote) while listening to the  
radio.  
the remote) to set SYNC ON.  
2 Press PRESET + or repeatedly to  
select the program type you want.  
3 Press and hold TUNING (TUNING/  
CLOCK/TIMER on the remote) + or .  
When the tuner receives a program, PTY”  
flashes.  
Tip  
TYPE NOT FOUNDappears when the program  
type you select is not currently being broadcast.  
To cancel PTY  
Press RDS/DIR (PLAY MODE/RDS/DIR on  
the remote) again.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape  
Finding the beginning of a  
track (AMS*)  
Loading a tape  
During playback, press . m or M >.  
1 Press TAPE.  
The tape is wound or rewound to the beginning  
of the next or current track, and play will start  
automatically. The search direction, +”  
(forward) or “–” (back), and 1appear in the  
display.  
2 Press Z PUSH OPEN/CLOSE.  
3 Insert a tape in deck with the side you  
want to play/record facing forward.  
* AMS (Automatic Music Sensor)  
Tip  
Insert with the side  
you want to play/  
record facing forward.  
You can change the display into the clock display (for  
five seconds) by pressing DISPLAY.  
Note  
The AMS function may not operate correctly under  
the following circumstances:  
When the unrecorded space between tracks is less  
than 4 seconds long.  
If completely different information is recorded on  
the left and right channels.  
When there are continuous sections of extremely  
low level or low frequency sound (like those of a  
baritone sax).  
Playing a tape  
You can use TYPE I (normal), TYPE II (CrO2  
or TYPE IV (metal) tape.  
)
When the system is placed near a television. (In this  
case, we recommend moving the system farther  
away from the television or turning off the  
television.)  
1 Load a recorded tape.  
2 Press TAPE.  
3 Press RDS/DIR (PLAY MODE/RDS/DIR  
on the rmote) repeatedly to select g  
to play one side, h to play both sides,  
or j* to play both sides repeatedly.  
* The tape automatically stops after playing  
back five times.  
4 Press nN.  
Press nN again to play the reverse  
side.  
Press  
To  
x
Stop play  
Pause  
X
Press again to resume play.  
With the tape stopped, press  
. m/M >  
Fast-forward or rewind  
Remove the cassette  
Z PUSH OPEN/CLOSE  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording to a tape  
–– CD Synchro Recording/Recording Manually  
You can record from a CD or radio. You can use TYPE I (normal) tape.  
Steps  
Recording from a CD  
Recording from the radio  
(CD Synchro Recording)  
1
2
Load a blank tape.  
Press CD.  
Press TUNER (TUNER/BAND on the  
remote).  
3
4
Load the CD you want to record.  
Tune in the station you want to record.  
Press z.  
The deck stands by for recording.  
5
6
Press nN, if you want to switch the direction.  
Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select g  
to record on one side, h to record on both sides.  
7
Press z again.  
Recording starts.  
To stop recording  
Press x.  
Tips  
For recording from a CD to a tape manually, you  
can press . m or M > to select tracks  
during recording pause mode (after step 4 and  
before step 6).  
When you record on both sides, be sure to start  
from the front side. If you start from the reverse  
side, recording stops at the end of the reverse side.  
When an AM program is noisy, set ISS to select the  
position that most decreases the noise.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Insert a recordable tape with the side  
you want to record on facing towards  
you.  
Timer-recording radio  
programs  
You can record a preset radio station from a  
specified time.  
8 Press z.  
9 Press nN, if you want to switch the  
direction.  
To timer-record, you must preset the radio  
station (see Presetting radio stationson page  
10) and set the clock (see Setting the timeon  
page 7) beforehand.  
10Press RDS/DIR (PLAY MODE/RDS/DIR  
on the remote) repeatedly to select g  
to record on one side, h to record on  
both sides.  
1 Tune in the preset radio station that  
you want to record from (see Listening  
to the radioon page 11).  
11Press ?/1 to turn off the system.  
2 Press CLOCK/TIMER on the remote  
repeatedly until SET TMRappears,  
then press TUNER MEM/ENTER on the  
remote.  
Do this  
To  
Turn on the system and then  
start over from step 1 when  
the TIMER indicator  
appears.  
Check or change the  
setting  
ONappears, and the hour indication  
flashes.  
Press TIMER ON/OFF on  
the remote until the TIMER  
indicator goes on.  
Activate the timer  
operation  
3 Set the starting time.  
Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly to set the hour,  
then press TUNER MEM/ENTER on the  
remote.  
Press TIMER ON/OFF on  
the remote until the TIMER  
indicator goes off.  
Cancel the timer  
operation  
The minute indication begins flashing next.  
Notes  
Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly to set the minute,  
then press TUNER MEM/ENTER on the  
remote.  
If the system is in the recording or recording-pause  
mode at the preset time, the timer recording will not  
be made.  
If the system is playing back a tape at the preset  
time, the system will switch to the tuner, but the  
timer recording will not be made.  
The hour indication flashes again.  
4 Set the time to stop the recording  
following the procedure in step 3.  
5 Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly until RECORD”  
appears, then press TUNER MEM/  
ENTER on the remote.  
The TIMER indicator lights up.  
6 Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly to adjust the  
volume* for listening to the radio when  
it is activated by the timer, then press  
TUNER MEM/ENTER on the remote.  
* This does not affect the recording volume; it  
only adjusts the volume for when the radio turns  
on at the preset time.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment  
Adjusting the sound  
Press MEGA BASS.  
MEGA BASSappears in the display. To  
return to normal sound, press the button again.  
Selecting the audio  
emphasis  
Selecting the preset effect from the  
music menu  
Press MUSIC MENU repeatedly to select the  
preset effect you desire.  
Each time you press the button, the display  
changes as follows:  
ROCK t POP t JAZZ t FLAT* t  
ROCK t ...  
* FLATis displayed for a few seconds.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other features  
Waking up to music  
Daily Timer  
Falling asleep to music  
Sleep Timer  
You can wake up to music at a preset time  
every day. Make sure you have set the clock  
(see page 7).  
You can set the system to turn off after certain  
amount of time, so that you can fall asleep to  
music.  
1 Prepare the sound source you want to  
Press SLEEP on the remote.  
play.  
Every time you press the button, the minute  
display (the turn-off time) changes as follows:  
CD: Load a CD.  
Tape: Insert a tape with the side you  
90 t 80 t 70 t t 10 t OFF t 90  
want to play on facing towards you.  
t …  
Radio: Tune in the preset station you  
While the Sleep Timer is on, TIMERflashes  
want (see page 10).  
in the display.  
2 Press CLOCK/TIMER on the remote  
repeatedly until SET TMRappears,  
then press TUNER MEM/ENTER on the  
remote.  
To  
Press  
Check the  
SLEEP on the remote once.  
ONappears, and the hour indication  
remaining time  
flashes.  
Change the  
time to turn off  
SLEEP on the remote repeatedly  
to select the time you want.  
3 Set the starting time.  
Cancel the Sleep SLEEP on the remote repeatedly  
Timer function  
until SLEEP OFFappears.  
Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly to set the hour,  
then press TUNER MEM/ENTER on the  
remote.  
The minute indication begins flashing next.  
Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly to set the minute,  
then press TUNER MEM/ENTER on the  
remote.  
The hour indication flashes again.  
4 Set the time to stop the playback  
following the procedure in step 3.  
5 Press TUNING/CLOCK/TIMER + or on  
the remote repeatedly until the music  
source you want appears, and then  
press TUNER MEM/ENTER on the  
remote.  
The display changes as follows:  
TUNER t RECORD (tuner) t CD t  
TAPE t TUNER t …  
The TIMER indicator lights up.  
continued  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Waking up to music (continued)  
6 Press TUNER MEM/ENTER on the  
remote.  
The type of timer followed by the start time,  
stop time, and the music source, appear,  
then the original display appears.  
7 Press TUNING/CLOCK/TIMER + or on  
the remote to adjust the volume, then  
press TUNER MEM/ENTER on the  
remote.  
8 Press ?/1 to turn off the system.  
To  
Do this  
Check or change  
the setting  
Turn on the system and then  
start over from step 1 when the  
TIMER indicator appears.  
Activate the timer  
operation  
Press TIMER ON/OFF on the  
remote until the TIMER  
indicator goes on.  
Cancel the timer  
Press TIMER ON/OFF on the  
remote until the TIMER  
indicator goes off.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
On operation  
If the system is brought directly from a cold to a  
warm location, or is placed in a very damp room,  
moisture may condense on the lens inside the CD  
player. Should this occur, the system will not  
operate properly. Remove the CD and leave the  
system turned on for about an hour until the  
moisture evaporates.  
Precautions  
On operating voltage  
Before operating the system, check that the operating  
voltage of your system is identical with the voltage of  
your local power supply.  
When you move the system, take out any discs.  
On safety  
If you have any questions or problems concerning  
your stereo system, please consult your nearest Sony  
dealer.  
The system is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the system itself has been turned off.  
Unplug the system from the wall outlet (mains) if it  
is not to be used for an extended period of time. To  
disconnect the cord (mains lead), pull it out by the  
plug. Never pull the cord itself.  
Notes on CDs  
Before playing, clean the CD with a cleaning cloth.  
Wipe the CD from the center out.  
Do not use solvents.  
Do not expose the CD to direct sunlight or heat  
sources.  
Discs with non-standard shapes (e.g., heart, square,  
star) cannot be played on this system. Attempting to  
do so may damage the system. Do not use such  
discs.  
Should any solid object or liquid fall into the  
component, unplug the stereo system and have the  
component checked by qualified personnel before  
operating it any further.  
The AC power cord must be changed only at a  
qualified service shop.  
On placement  
Note on CD-R/CD-RW playback  
Place the system in a location with adequate  
ventilation to prevent heat build-up the system.  
Do not place the system in an inclined position.  
Do not place the system in locations where it is;  
Extremely hot or cold  
Discs recorded on CD-R/CD-RW drives may not be  
played back because of scratches, dirt., recording  
condition or the drives characteristics. Besides, the  
discs, which are not yet finalized at the end of  
recording cannot be played back.  
Dusty or dirty  
Very humid  
Vibrating  
Subject to direct sunlight.  
Cleaning the cabinet  
Use a soft cloth slightly moistened with mild  
detergent solution.  
On heat buildup  
Although the system heats up during operation, this  
is not malfunction.  
Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
To save a tape permanently  
To prevent a tape from being accidentally recorded  
over, break off the cassette tab from side A or B as  
illustrated.  
If you continuously use this system at a large volume,  
the cabinet temperature of the top, side and bottom  
rises considerably. To avoid burning yourself, do not  
touch the cabinet.  
Break off the  
cassette tab of  
side A  
To prevent a malfunction, do not cover the ventilation  
hole for the cooling fan.  
If you later want to reuse the tape for recording, cover  
the broken tab with adhesive tape.  
continued  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions (continued)  
Troubleshooting  
If you have any problem using this system, use  
the following check list.  
Before placing a cassette in the tape  
deck  
First, check that the power cord is connected  
firmly and the speakers are connected correctly  
and firmly.  
Take up any slack in the tape. Otherwise the tape may  
get entangled in the parts of the tape deck and become  
damaged.  
Should any problem persist, consult your  
nearest Sony dealer.  
When using a tape longer than 90  
minutes  
The tape is very elastic. Do not change the tape  
operations such as play, stop, and fast-winding (etc.)  
frequently. The tape may get entangled in the tape  
deck.  
General  
The clock setting/radio presetting/timer is  
canceled.  
Cleaning the tape heads  
The power cord is disconnected or a power  
failure occurs longer than half a day.  
Redo the following:  
Clean the tape heads after every 10 hours of use.  
Make sure to clean the tape heads before you start an  
important recording or after playing an old tape. Use  
separately sold dry-type or wet-type cleaning cassette.  
For details, refer to the instructions of the cleaning  
cassette.  
— “Setting the timeon page 7  
— “Presetting radio stationson page 10  
If you have set the timer, also redo Timer-  
recoding radio programson page 15 and  
Waking up to musicon page 17.  
Demagnetizing the tape heads  
Demagnetize the tape heads and the metal parts that  
have contact with the tape every 20 to 30 hours of use  
with a separately sold demagnetizing cassette. For  
details, refer to the instructions of the demagnetizing  
cassette.  
There is no sound.  
Turn VOLUME clockwise and hold.  
The headphones are connected.  
Insert only the stripped portion of the speaker  
cord into the SPEAKER terminal. Inserting the  
vinyl portion of the speaker cord will obstruct the  
speaker connections.  
There is severe hum or noise.  
A TV or VCR is placed too close to the stereo  
system. Move the stereo system away from the  
TV or VCR.  
The clock indication does not show the correct  
time.  
A power interruption occurred. Set the clock and  
timer settings again.  
The timer does not function.  
Set the clock correctly.  
You cannot activate the Timer-recording and  
Daily Timer at the same time.  
When you used the Sleep Timer, Daily Timer  
and Timer-recording will not turn on the system  
until the Sleep Timer turns it off.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape Deck  
The remote does not function.  
There is an obstacle between the remote and the  
system.  
The tape does not record.  
No tape in the cassette compartment.  
The tab has been removed from the cassette.  
The tape has reeled to the end.  
The remote is not pointing in the direction of the  
systems sensor.  
The batteries have run down. Replace the  
batteries.  
The tape does not record nor play or there is a  
decrease in sound level.  
The color irregularity on a TV screen persists.  
The heads are dirty. Clean them (see Cleaning  
the tape headson page 20).  
Turn off the TV set once, then turn it on after 15  
to 30 minutes. If the color irregularity still  
persists, place the speakers farther away from the  
TV set.  
The record/playback heads are magnetized.  
Demagnetize them (see Demagnetizing the tape  
headson page 20).  
The tape does not erase completely.  
Speakers  
The record/playback heads are magnetized.  
Demagnetize them (see Demagnetizing the tape  
headson page 20).  
Sound comes from one channel or unbalanced  
left and right volume.  
Check the speaker connection and speaker  
placement.  
There is excessive wow or flutter, or the sound  
drops out.  
Sound lacks bass.  
The capstans or pinch rollers are dirty. Clean  
them (see Cleaning the tape headson page 20).  
Check that the speakers + and terminals are  
connected correctly.  
Noise increases or the high frequencies are  
erased.  
The record/playback heads are magnetized.  
Demagnetize them (see Demagnetizing the tape  
headson page 20).  
CD Player  
The CD compartment does not close.  
The CD is not placed properly.  
The CD will not play.  
Tuner  
The CD is not lying flat in the CD compartment.  
The CD is dirty.  
Noise is heard.  
Adjust the antennas.  
The CD is inserted label side down.  
Moisture condensation has built up. Remove the  
CD and leave the system turned on for about an  
hour until the moisture evaporates.  
A stereo FM program cannot be received in  
stereo.  
Set MONO STEREO so that STEREO”  
appears.  
Messages  
The following message may appear in the  
display during operations.  
NO DISC  
There is no disc on the CD compartment.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD player section  
System  
Specifications  
Compact disc and digital  
audio system  
Laser  
Semiconductor laser  
(λ=780 nm)  
AUDIO POWER SPECIFICATIONS:  
(U.S.A. model only)  
POWER OUTPUT AND TOTAL  
Emission duration:  
continuous  
Frequency response  
20 Hz - 20 kHz (±0.5 dB)  
HARMONIC DISTORTION:  
Tape player section  
with 8 loads both channels driven, from 120  
- 10,000 Hz; rates 12 W per channel minimum  
RMS power, with no more than 10% total  
harmonic distortion from 250 mW to rated  
output.  
Recording system  
4-track 2-channel stereo  
Frequency response  
50 - 13 000 Hz (±3 dB),  
using Sony TYPE I  
cassette  
Wow and flutter  
±0.15% W.Peak (IEC)  
0.1% W.RMS (NAB)  
±0.2% W.Peak (DIN)  
Amplifier section Canadian model:  
Continuous RMS power output (reference)  
12 + 12 W  
Tuner section  
FM stereo, FM/AM superheterodyne tuner  
(8 at 1 kHz, 10% THD)  
FM tuner section  
Tuning range  
Antenna  
Antenna terminal  
Intermediate frequency  
European model:  
87.5 - 108.0 MHz  
FM lead antenna  
75 coaxial  
DIN power output (rated) 11 + 11 W  
(8 at 1 kHz, DIN)  
Continuous RMS power output (reference)  
12 + 12 W  
10.7 MHz  
(8 at 1 kHz, 10% THD)  
Music power output (reference)  
27 + 27 W  
AM tuner section  
Tuning range  
Pan-American model:  
530 - 1 710 kHz  
(with the interval set at  
10 kHz)  
Other model:  
The following measured at AC 230 V, 50/60 Hz  
DIN power output (rated) 11 + 11 W  
(8 at 1 kHz, DIN)  
531 - 1 710 kHz  
(with the interval set at  
9 kHz)  
531 -1 602 kHz  
(with the interval set at  
9 kHz)  
531 - 1 602 kHz  
(with the interval set at  
9 kHz)  
530 - 1 710 kHz  
(with the interval set at  
10 kHz)  
Continuous RMS power output (reference)  
12 + 12 W  
European model:  
Other models:  
(8 at 1 kHz, 10% THD)  
Outputs  
PHONES:  
(stereo mini jack)  
SPEAKER:  
Accepts headphones of  
8 or more  
Accepts impedance of 8 to  
16 Ω  
Antenna  
Antenna terminal  
Intermediate frequency  
AM loop antenna  
External antenna terminal  
450 kHz  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speaker  
Speaker system  
Speaker units  
Bass-reflex type  
Full range 10 cm, cone  
type  
Nominal impedance  
Dimensions (w/h/d)  
Mass  
8 Ω  
Approx. 145 × 238 × 171 mm  
Approx. 1.4 kg net per  
speaker  
General  
Power requirements  
North American model: 120 V AC, 60 Hz  
European model:  
Mexican model:  
Argentine model:  
Hong Kong model:  
Other models:  
230 V AC, 50/60 Hz  
120 V AC, 60 Hz  
220 V AC, 50/60 Hz  
230 V AC, 50/60 Hz  
230 V AC, 50/60 Hz  
Power consumption  
U.S.A. model:  
Canadian model:  
European model:  
35 W  
35 W  
40 W  
0.9 W (in the standby  
mode)  
40 W  
Other models:  
Dimensions (w/h/d):  
Mass:  
Approx. 145 × 238 × 234 mm  
Approx. 3.4 kg  
Supplied accessories:  
AM loop antenna (1)  
Remote Commander (1)  
Batteries (2)  
FM lead antenna (1)  
Speaker pads (8)  
Design and specifications are subject to change  
without notice.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Flat Panel Television D65U Series User Manual
Shoprider Motor Scooter SL7 3 User Manual
Shure Microphone BG 10 User Manual
Sony Digital Camera DSC H200 User Manual
Stanton Turntable DJ For Life User Manual
Sunbeam Coffeemaker 32863281 User Manual
Swisher Lawn Mower pol1250f User Manual
Sylvania CRT Television 6309CCC User Manual
Sylvania TV DVD Combo 6513DG User Manual
Symphonic Projection Television WF20L6 User Manual