4-239-338-11 (2)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. _______________
Serial No. _______________
CMT-EP505
CMT-EP404
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
List of Button Locations and
Reference Pages
Sound Adjustment
Adjusting the sound
— MEGA BASS ........................... 17
Main unit ............................................... 4
Remote control ...................................... 5
Turning off the sound
— Muting ...................................... 17
Getting Started
Timer
Hooking up the system .......................... 6
Falling asleep to music
Inserting two size AA (R6) batteries into
the remote ........................................ 7
— Sleep Timer .............................. 17
Waking up to music
Setting the clock .................................... 7
— Daily Timer .............................. 18
CD
Display
Loading the CD ..................................... 8
Using the CD display .......................... 19
Playing the CD
— Normal Play/Shuffle Play/Repeat
Play.................................................. 8
Troubleshooting
Programing the CD tracks
Problems and remedies ........................ 19
— Program Play .............................. 9
Additional information
Tuner
Precautions .......................................... 21
Specifications ...................................... 22
Presetting radio stations....................... 10
Listening to the radio
— Preset Tuning ........................... 11
— Manual Tuning ......................... 12
Using the Radio Data System (RDS)* 12
* For European model only
Tape
Loading a tape ..................................... 14
Playing a tape ...................................... 14
Recording to a tape
— CD Synchro Recording/Recording
Manually ....................................... 15
Timer-recording radio programs ......... 16
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Button Locations and Reference Pages
Illustration number
How to use this page
Use this page to find the location of buttons and other
parts of the system that are mentioned in the text.
r
PLAY MODE qj (8, 9)
R
R
Name of button/part
Reference page
Main unit
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
@/1 (power) wd (7, 16, 18)
P – Z
A – M
CD
PHONES jack qk
Cassette compartment qg (14)
CD 4 (8, 9, 15)
DIR* qj (14, 15)
DISPLAY 2 (12, 19)
Display Window 5 (8, 9, 10,
11)
ENTER qh (7, 9, 10, 11, 13)
MEGA BASS 8 (17)
MUSIC MENU 9 (17)
PLAY MODE qj (8, 9)
PRESET +/– qd (11, 13)
RDS/DIR** qj (13, 14, 15)
Remote sensor 0
. m (go back) qa (8, 9, 14)
M > (go forward) qa (8, 9,
14)
nN* (play) w; (8, 9)
N*** (play) w; (8, 9)
X (pause) ws (8)
TAPE 3 (14)
TIMER indicator 1 (16, 18)
TUNER 6 (10, 11, 12, 15)
TUNER MEM qh (10, 11)
TUNING +/– qa (10, 11, 12, 13)
VOLUME control qs
Z PUSH OPEN/CLOSE 7 (8)
x (stop) ql (8, 9)
TAPE
M > (fast forward) qa (14)
X (pause) ws (14)
nN* (play) w; (14, 15, 16)
N*** (play) w; (14)
z (recording) wa (15, 16)
. m (rewind) qa (14)
Z PUSH OPEN/CLOSE qf (14)
x (stop) ql (14, 15)
*
CMT-EP505 only
** CMT-EP505, European model
only
***CMT-EP404 only
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
A – M
BUTTON DESCRIPTIONS
m (rewind) M (fast forward)
ql (8, 14)
. (go back) >*** (go
forward) w; (7, 8, 14, 15)
X (pause) ws (8, 14)
nN** (play) wa (8, 9, 14, 15,
16)
`/1 (power) 4 (7, 16, 18)
x (stop) 6 (8, 9, 14, 15)
P – Z
PLAY MODE/RDS/DIR* 7 (8,
9, 13, 14, 15)
PRESET +/– 9 (11, 13)
REPEAT 8 (8)
SLEEP 1 (17)
TAPE wd (14)
TUNER/BAND 5 (10, 11, 12,
15)
TUNER MEMORY qj (10, 11)
TUNING + q; (10, 11, 12, 13)
TUNING – qk (10, 11, 12, 13)
VOL (volume) +/– qs
CD wf (8, 9, 15)
CLOCK/TIMER +/– w; (16, 18)
CLOCK/TIMER ON/OFF 2
(16, 18)
CLOCK/TIMER SET 3 (7, 16,
18)
DISPLAY qa (12, 19)
ENTER qf (7, 9, 10, 11, 13, 18)
MEGA BASS qd (17)
MUSIC MENU +/– qh (17)
MUTING qg (17)
*
The DIR function works for
CMT-EP505 only.
The RDS function works for
CMT-EP505, European
model only.
** The n (reverse play)
function works for CMT-
EP505 only.
*** The ./> button does
not work for CMT-EP404
tape function.
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Do the following procedure 1 to 3 to hook up your system using the supplied cords and
accessories.
AM loop
antenna
FM antenna
Right speaker
Left speaker
1 Connect the speakers.
2 Connect the FM/AM antennas (CMT-
EP505 only).
Connect the speaker cords to the SPEAKER
terminals as shown below.
Set up the AM loop antenna, then connect
it.
SPEAKER
(IMPED
ANCE USE 8
Ω
)
Insert only the
stripped portion.
Red (3)
L
Jack type A
R
Extend the FM lead
antenna horizontally.
AM loop antenna
Black (#)
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Jack type B
Setting the clock
Extend the FM lead
antenna horizontally.
AM loop antenna
1 Turn on the system.
2 Press CLOCK/TIMER SET on the
FM ANT
Ω
75
remote.
AXIAL
CO
3 Press . or > on the remote
AM ANT
repeatedly to set the hour.
4 Press ENTER.
3 Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
5 Press . or > on the remote
repeatedly to set the minute.
6 Press ENTER.
The clock starts working.
To turn on the system, press [/ 1 (power).
To adjust the clock
1 Press CLOCK/TIMER SET on the remote.
Inserting two size AA (R6)
batteries into the remote
2 Press . or > on the remote to select
“SET CLK”, then press ENTER.
3 Do the same procedures as step 3 to 6 above.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
e
E
E
e
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
3 Press nN (CMT-EP505) or N (nN
on the remote, CMT-EP404).
Loading the CD
Other Operations
1 Press Z PUSH OPEN/CLOSE down to
open the lid of the CD compartment.
To
Do this
Stop playback
Pause
Press x.
2 Place a CD with the label side up on the
compartment.
Press X.
Press again to resume play.
Select a track
Turn ./> clockwise or
counterclockwise (or press . or
> on the remote).
Find a point
in a track
During play, turn and hold m/M
clockwise or counterclockwise (or
keep pressing m or M on the
remote).
Release it when you find the desired
point.
Play repeatedly
(Repeat Play)
Press REPEAT on the remote
during play until “REPEAT” or
“REPEAT 1” appears.
3 Press Z PUSH OPEN/CLOSE down to
close the lid of the CD compartment.
REPEAT: For all the tracks on the
CD up to five times.
Playing the CD
— Normal Play/Shuffle Play/Repeat
Play
REPEAT 1: For a single track only.
To cancel playing repeatedly, press
REPEAT on the remote until
“REPEAT” or “REPEAT 1”
disappears.
This system lets you play the CD in different
Remove the CD
Press Z PUSH OPEN/CLOSE.
play modes.
Playing time
Track number
1 Press CD.
2 Press PLAY MODE (PLAY MODE/RDS/
DIR on the remote) repeatedly until the
mode you want appears in the display.
Select
To play
No display
The CD in original order.
(Normal Play)
SHUFFLE
The tracks on the CD in random
(Shuffle Play) order.
PROGRAM
The tracks on the CD in the
(Program Play) order you want them to be
played (see “Programing the CD
tracks” on page 9).
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Programing the CD tracks
— Program Play
Cancel Program Press PLAY MODE (PLAY
Play
MODE/RDS/DIR on the remote)
until “PROGRAM” disappears
from the display.
You can make a program of up to 32 tracks in
the order you want them to be played.
Add a track to
the end of the
program
Do steps 3 and 4 with Program Play
stopped.
1 Press CD, then place a CD.
Erase the entire Press x once, when Program Play
program
2 Press PLAY MODE (PLAY MODE/RDS/
DIR on the remote) repeatedly until
“PROGRAM” appears in the display.
is in stop mode, or twice during
Program Play.
3 Turn ./ > clockwise or
counterclockwise (or press . or >
on the remote) until the desired track
appears in the display.
Tip
The program you made remains in the system’s
memory even after it has been played back. Press CD,
then press nN (CMT-EP505) or N (nN on
the remote, CMT-EP404) to play the same program
again.
Preset number
Selected track number
(including selected track)
4 Press ENTER.
The track is programed. The program step
number appears.
5 To program additional tracks, repeat
steps 3 to 4.
6 Press nN (CMT-EP505) or N (nN
on the remote, CMT-EP404).
Program Play starts.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
Setting presets through
automatic tuning
Presetting radio stations
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
You can preset up to 30 stations for FM and
AM. You can then tune in any of those stations
simply by selecting the corresponding preset
number.
2 Turn and hold TUNING +/– (or press
and hold TUNING + or TUNING – on the
remote) until the frequency indication
starts to change, then release it.
There are two ways to store the station presets.
To
Method
Automatically tune all of the
stations that can be received in
your area and then store them
manually
Automatic Tuning
Preset
Scanning stops automatically when the
system tunes in a station. “STEREO” (for a
stereo program) appears.
If the scanning doesn’t stop
Manually tune and store the
radio frequency of your
favourite stations
Manual Tuning
Preset
Set the frequency of the desired radio
station as described in steps 2 through 5 of
“Setting presets through manual tuning”.
3 Press TUNER MEM (TUNER MEMORY
on the remote).
The preset number starts flashing.
The stations are stored from preset number
1.
Preset number
4 Press ENTER.
The station is stored.
5 Repeat steps 1 to 4 to store other
stations.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To erase all preset stations
Setting presets through
manual tuning
1 Press and hold TUNER MEM (TUNER
MEMORY on the remote) until “ERASE”
and “PRESET” appear alternately.
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
2 Press ENTER.
All preset stations are cleared.
2 Turn and hold TUNING +/– (or press
and hold TUNING + or TUNING – on the
remote) repeatedly to tune in the
desired station.
To change the AM tuning interval
(except for the European model)
Disconnect the power cord from the wall outlet
first, and then set the AM FREQ STEP switch
at the rear to 9 kHz or 10 kHz.
3 Press TUNER MEM (TUNER MEMORY
on the remote).
The preset number starts flashing.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
The stations are stored from preset number
1.
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
-
Preset number
Listening to a preset station
— Preset Tuning
4 Press ENTER.
The station is stored.
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 10).
5 Repeat steps 1 to 4 to store other
stations.
1 Press TUNER (TUNER/BAND on the
Other Operations
remote).
Do this
To
2 Press PRESET + or – repeatedly to tune
in the desired preset station (or RDS
station name*).
Follow the procedure
described in “Setting
presets through manual
tuning”.
Tune in a station with a
weak signal
The preset number appears in the display
for a few seconds.
When only one station is preset, only that
station is tuned.
Start over from step 1.
Change the preset
number
Start over from step 1.
After step 3, press
PRESET + or –
Set another station to
an exsisting preset
number
* European model only.
repeatedly to select the
preset number where you
want to store the other
station and then press
ENTER.
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio (continued)
Using the Radio Data
System (RDS)
Listening to non-preset radio
station
(CMT-EP505, European model only)
— Manual Tuning
What is the Radio Data System?
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features like station name display and
location of stations by program type. RDS is
available only on FM stations.*
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
2 Turn and hold TUNING +/– (or press
and hold TUNING + or TUNING – on the
remote) repeatedly to tune in the
desired station.
Note
Tips
RDS may not work properly if the station you are
tuned in is not transmitting the RDS signal properly
or if the signal strength is weak.
• To improve FM broadcast reception, adjust the
antennas.
• To improve AM broadcast reception, adjust the
antenna (for CMT-EP505) or reorient the main unit
itself (for CMT-EP404).
• You can change the display into the clock display
(for five seconds) by pressing DISPLAY.
* Not all FM stations provide RDS service, nor do
they provide the same types of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
Receiving RDS broadcasts
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, “RDS” appears in the display.
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
Frequency t RDS name* t RDS TEXT*
t RDS type* t Clock display (for five
seconds) t Frequency t ...
* If the RDS broadcast is not received, the RDS
name, RDS TEXT and RDS type may not appear in
the display.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a station by
program type (PTY)
You can locate a station you want by selecting
a program type. The system tunes in the type of
programs currently being broadcast from the
RDS stations stored in the tuner’s preset
memory.
Listening to a traffic
information
When the tuner receives traffic information
signal, “TRAFFIC INFORMATION” will be
scrolled in the display.
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly until “INFO
OFF” or “INFO ON” appears while
listening to an FM program.
The types of programs include NEWS,
AFFAIRS (current news), INFO, SPORT,
EDUCATE (education programs), DRAMA,
CULTURE, SCIENCE, VARIED (interviews,
games and comedy), POP M, ROCK M, EASY
M, LIGHT M, CLASSICS, OTHER M,
WEATHER, FINANCE, CHILDREN,
SOCIAL, RELIGION, PHONE IN, TRAVEL,
LEISURE, JAZZ, COUNTRY, NATION M,
OLDIES, FOLK M , DOCUMENT, TEST
ALARM and NONE (any programs not defined
above).
2 Press ENTER to set “INFO ON”.
Setting the time to the
broadcast
You can set the time to the clock information
received.
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly until “SYNC
OFF” or “SYNC ON” appears while
listening to an FM program.
1 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) while listening to the
radio.
2 Press ENTER to set “SYNC ON”.
2 Press PRESET + or – repeatedly to
select the program type you want.
3 Turn and hold TUNING +/– (or press
and hold TUNING + or TUNING – on the
remote).
When the tuner receives a program, “PTY”
flashes.
Tip
“TYPE NOT FOUND” appears when the program
type you select is not currently being broadcast.
To cancel PTY
Press RDS/DIR (PLAY MODE/RDS/DIR on
the remote) again.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
Finding the beginning of a
track (AMS*) (CMT-EP505
only)
During playback, turn ./> clockwise or
counterclockwise (or press . or > on
the remote).
Loading a tape
1 Press Z PUSH OPEN/CLOSE.
2 Insert a tape in deck with the side you
want to play/record facing forward.
The tape is wound or rewound to the beginning
of the next or current track, and play will start
automatically. The search direction, “+”
(forward) or “–” (back), and “1” appear in the
display.
Insert with the side
you want to play/
record facing forward.
* AMS (Automatic Music Sensor)
Note
The AMS function may not operate correctly under
the following circumstances:
– When the unrecorded space between tracks is less
than 4 seconds long.
– When the system is placed near a television.
Playing a tape
You can use TYPE I (normal), TYPE II (CrO2
(CMT-EP505 only) or TYPE IV (metal)
(CMT-EP505 only) tape.
)
1 Load a recorded tape.
2 Press TAPE.
3 Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly to select g
to play one side, h to play both sides,
or j* to play both sides repeatedly
(CMT-EP505 only).
* The tape automatically stops after playing
back five times.
4 Press nN (CMT-EP505) or N (nN
on the remote, CMT-EP404).
Press nN again to play the reverse
side (CMT-EP505 only).
Do this
To
Press x.
Stop play
Pause
Press X.
Press again to resume play.
With the tape stopped, turn
m/M clockwise or
Fast-forward or rewind
counterclockwise (or press
m or M on the remote).
Press Z PUSH OPEN/
Remove the cassette
CLOSE.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording to a tape
— CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
Steps
Recording from a CD
Recording from the radio
(CD Synchro Recording)
1
2
Load a blank tape.
Press CD.
Press TUNER (TUNER/BAND on the
remote).
3
4
Load the CD you want to record.
Tune in the station you want to record.
Press z.
The deck stands by for recording.
When you want to record on the reverse side, press nN (CMT-EP505 only).
5
6
Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select g
to record on one side, h to record on both sides (CMT-EP505 only).
Press z again.
Recording starts.
To stop recording
Press x.
Tips
• For recording from a CD to a tape manually, you
can turn ./> clockwise or counterclockwise
(or press . or > on the remote) to select
tracks during recording pause mode (after step 4
and before step 6).
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side
(CMT-EP505 only).
• When an AM program is noisy while recording, set
the ISS switch at the rear of the unit to select the
position that most decreases the noise (CMT-EP404
only).
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Press z.
Timer-recording radio
programs
9 Press nN, if you want to switch the
direction (CMT-EP505 only).
10Press RDS/DIR (PLAY MODE/RDS/DIR
on the remote) repeatedly to select g
to record on one side, h to record on
both sides (CMT-EP505 only).
To timer-record, you must preset the radio
station (see “Presetting radio stations” on page
10) and set the clock (see “Setting the clock”
on page 7) beforehand.
11Press ?/1 to turn off the system.
1 Tune in the preset radio station (see
“Listening to the radio” on page 11).
Do this
To
2 Press CLOCK/TIMER SET on the
remote repeatedly until “SET TMR”
appears, then press ENTER on the
remote.
Turn on the system and then
start over from step 1 when
the TIMER indicator
appears.
Check or change the
setting
“ON” appears, and the hour indication
flashes.
Press CLOCK/TIMER ON/
OFF on the remote until the
TIMER indicator goes on.
Activate the timer
operation
3 Set the starting time.
Press CLOCK/TIMER ON/
OFF on the remote until the
TIMER indicator goes off.
Cancel the timer
operation
Press CLOCK/TIMER + or – on the
remote repeatedly to set the hour, then
press ENTER on the remote.
The minute indication begins flashing next.
Notes
Press CLOCK/TIMER + or – on the
remote repeatedly to set the minute,
then press ENTER on the remote.
• When you use the recording timer at the same time
as the Sleep Timer, the Sleep Timer setting has
priority.
• You cannot activate the Daily Timer and the
recording timer at the same time.
• Do not operate the system from the time the system
turns on until the recording starts (about 30 seconds
before the preset time).
• If the system is on about 30 seconds before the
preset time, the timer-recording will not be
activated.
The hour indication flashes again.
4 Set the time to stop the recording
following the procedure in step 3.
5 Press CLOCK/TIMER + or – on the
remote repeatedly until “RECORD”
appears, then press ENTER on the
remote.
• The volume is reduced to minimum during
recording.
The TIMER indicator lights up.
• If the system is in the recording or recording-pause
mode at the preset time, the timer recording will not
be made.
• If the system is playing back a tape at the preset
time, the system will switch to the tuner, but the
timer recording will not be made.
6 Press CLOCK/TIMER + or – on the
remote repeatedly to adjust the
volume* for listening to the radio when
it is activated by the timer, then press
ENTER on the remote.
* This does not affect the recording volume; it
only adjusts the volume for when the radio turns
on at the preset time.
7 Insert a recordable tape with the side
you want to record on facing towards
you.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer
Sound Adjustment
Falling asleep to music
Adjusting the sound
— Sleep Timer
Reinforcing the bass sound
— MEGA BASS
You can set the system to turn off after certain
amount of time, so that you can fall asleep to
music.
You can listen to music with stronger bass
tones.
Press SLEEP on the remote.
Every time you press the button, the minute
display (the turn-off time) changes as follows:
90 t 80 t 70 t … t 10 t OFF t 90
Press MEGA BASS.
“MEGA BASS” appears in the display and the
bass is reinforced.
t …
Press again to cancel MEGA BASS.
While the Sleep Timer is on, “TIMER” flashes
in the display.
Selecting the preset effect
from the music menu
To
Press
Press MUSIC MENU repeatedly to select
the preset effect you desire.
Check the
remaining time
SLEEP on the remote once.
Each time you press the button, the display
changes cyclically as follows:
Change the
time to turn off
SLEEP on the remote repeatedly
to select the time you want.
ROCK t POP t JAZZ t FLAT* t
ROCK t ...
Cancel the Sleep
Timer function
SLEEP on the remote repeatedly
until “SLEEP OFF” appears.
* “FLAT” is displayed for a few seconds.
Turning off the sound
— Muting
You can turn off the sound temporarily.
Press MUTING on the remote.
Press again to cancel muting.
Tip
You can also turn up the volume by turning
VOLUME clockwise or turning off the power and
turning it on again.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press CLOCK/TIMER + or – on the
remote to adjust the volume, then press
ENTER on the remote.
Waking up to music
— Daily Timer
The start time, the stop time, and the sound
source appear in turn, before the original
display returns.
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the clock”on page 7).
8 Press ?/1 to turn off the system.
1 Prepare the sound source you want to
play.
To
Do this
• CD: Place a CD.
• Tape: Insert a tape with the side you
want to play on facing towards you.
Check or change
the setting
Turn on the system and then
start over from step 1 when the
TIMER indicator appears.
Activate the timer
operation
Press CLOCK/TIMER ON/OFF
on the remote until the TIMER
indicator goes on.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 11).
Cancel the timer
Press CLOCK/TIMER ON/OFF
on the remote until the TIMER
indicator goes off.
2 Press CLOCK/TIMER SET on the
remote repeatedly until “SET TMR”
appears, then press ENTER on the
remote.
“ON” appears, and the hour indication
flashes.
3 Set the starting time.
Press CLOCK/TIMER + or – on the
remote repeatedly to set the hour, then
press ENTER on the remote.
The minute indication begins flashing next.
Press CLOCK/TIMER + or – on the
remote repeatedly to set the minute,
then press ENTER on the remote.
The hour indication flashes again.
4 Set the time to stop the playback
following the procedure in step 3.
5 Press CLOCK/TIMER + or – on the
remote to select the desired sound
source.
The indication changes as follows:
TUNER t RECORD (tuner) t CD t
TAPE t TUNER t …
The TIMER indicator lights up.
6 Press ENTER on the remote.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Display
Problems and remedies
Using the CD display
If you have any problem using this system, use
the following check list.
Press DISPLAY repeatedly.
The display changes as follows:
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current CD t Clock
display (for five seconds) t Elapsed playing
time on the current track t ...
Should any problem persist, consult your
nearest Sony dealer.
General
In the stop mode
The display or button remains lighted or flashes
even after the system was turned off.
Total number of tracks and total playing time
t Clock display (for five seconds) t Total
number of tracks and total playing time t ...
• Press DISPLAY on the remote repeatedly until
the clock display appears.
The clock indication does not show the correct
time.
• A power interruption occurred. Set the clock and
timer settings again.
The clock setting/radio presetting/timer is
canceled.
• The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
— “Setting the clock” on page 7
— “Presetting radio stations” on page 10
If you have set the timer, also redo “Timer-
recoding radio programs” on page 16 and
“Waking up to music” on page 18.
There is no sound.
• Turn VOLUME clockwise and hold.
• The headphones are connected.
• Insert only the stripped portion of the speaker
cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The timer does not function.
• Set the clock correctly.
• You cannot activate the Timer-recording and
Daily Timer at the same time.
• When you used the Sleep Timer, Daily Timer
and Timer-recording will not turn on the system
until the Sleep Timer turns it off.
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Problems and remedies (continued)
Tape Deck
The tape does not record.
• No tape in the cassette compartment.
• The tab has been removed from the cassette.
• The tape has reeled to the end.
The remote does not function.
• There is an obstacle between the remote and the
system.
• The remote is not pointing in the direction of the
system’s sensor.
The tape does not record nor play or there is a
decrease in sound level.
• The batteries have run down. Replace the
batteries.
• The heads are dirty. Clean them (see “Cleaning
the tape heads” on page 22).
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 22).
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
The tape does not erase completely.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 22).
Speakers
There is excessive wow or flutter, or the sound
drops out.
Sound comes from one channel or unbalanced
left and right volume.
• The capstans or pinch rollers are dirty. Clean
them (see “Cleaning the tape heads” on page 22).
• Check the speaker connection and speaker
placement.
Noise increases or the high frequencies are
erased.
Sound lacks bass.
• Check that the speaker’s + and – terminals are
connected correctly.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 22).
CD Player
Tuner
The CD compartment does not close.
• The CD is not placed properly.
Noise is heard.
• Adjust the antennas.
The sound drops out.
• The lens is dirty. Clean it with a commercially
available blower.
Messages
The following message may appear in the
display during operations.
The CD will not play.
• The CD is not lying flat in the CD compartment.
• The CD is dirty.
NO DISC
• The CD is inserted label side down.
• There is no disc on the CD compartment.
• Moisture condensation has built up. Remove the
CD and leave the system turned on for about an
hour until the moisture evaporates.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not
operate properly. Remove the CD and leave the
system turned on for about an hour until the
moisture evaporates.
Precautions
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
• When you move the system, take out any discs.
On safety
If you have any questions or problems concerning
your stereo system, please consult your nearest Sony
dealer.
• The system is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the system itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents.
• Do not expose the CD to direct sunlight or heat
sources.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this system. Attempting to
do so may damage the system. Do not use such
discs.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have the
component checked by qualified personnel before
operating it any further.
• The AC power cord must be changed only at a
qualified service shop.
• The nameplate is located on the bottom exteror.
Note on CD-R/CD-RW playback
On placement
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt, recording
condition or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording cannot be played back.
• Place the system in a location with adequate
ventilation to prevent heat build-up the system.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Vibrating
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
– Subject to direct sunlight.
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
On heat buildup
• Although the system heats up during operation, this
is not malfunction.
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
Break off the
cassette tab of
side A
If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
To prevent a malfunction, do not cover the ventilation
hole.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
continued
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions (continued)
Specifications
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
AUDIO POWER SPECIFICATIONS:
(CMT-EP505, U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
with 8 Ω loads both channels driven, from 120
- 10,000 Hz; rates 14 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
Amplifier section
Cleaning the tape heads
Canadian model (CMT-EP505):
Continuous RMS power output (reference)
14 + 14 W
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
(8 Ω at 1 kHz, 10% THD)
European model (CMT-EP505):
DIN power output (rated) 11 + 11 W
(8 Ω at 1 kHz, DIN)
Continuous RMS power output (reference)
14 + 14 W
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
(8 Ω at 1 kHz, 10% THD)
Music power output (reference)
27 + 27 W
European model (CMT-EP404):
DIN power output (rated) 6 + 6 W
(8 Ω at 1 kHz, DIN)
Continuous RMS power output (reference)
8 + 8 W
(8 Ω at 1 kHz, 10% THD)
Music power output (reference)
16 + 16 W
Other model (CMT-EP505):
The following measured at AC 230 V or AC 120 V,
50/60 Hz
DIN power output (rated) 11 + 11 W
(8 Ω at 1 kHz, DIN)
Continuous RMS power output (reference)
14 + 14 W
(8 Ω at 1 kHz, 10% THD)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
Accepts headphones of
8 Ω or more
Accepts impedance of 8 to
16 Ω
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD player section
System
Speaker
Speaker system
Speaker units
Compact disc and digital
audio system
Bass-reflex type
Full range 10 cm, cone
Laser
Semiconductor laser
(λ=780 nm)
type
8 Ω
Nominal impedance
Dimensions (w/h/d)
CMT-EP505:
CMT-EP404:
Mass
CMT-EP505:
CMT-EP404:
Emission duration:
continuous
Approx. 145 × 238 × 165 mm
Frequency response
20 Hz - 20 kHz (±0.5 dB)
Approx. 145 × 237 × 170 mm
Tape player section
Recording system
Approx. 1.5 kg
Approx. 1.3 kg
4-track 2-channel stereo
Frequency response
50 - 13 000 Hz (±3 dB),
using Sony TYPE I
cassette
General
Power requirements
Wow and flutter
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
North American model : 120 V AC, 60 Hz
European model:
Mexican model:
Argentine model:
Hong Kong model:
Other models:
230 V AC, 50/60 Hz
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
230 V AC, 50/60 Hz
230 V AC, 50/60 Hz
Tuner section
FM stereo, FM/AM superheterodyne tuner
Power consumption
U.S.A. model:
CMT-EP505:
Canadian model:
CMT-EP505:
European model:
CMT-EP505:
FM tuner section
Tuning range
Antenna
87.5 - 108.0 MHz
FM lead antenna
35 W
35 W
Antenna terminal (CMT-EP505)
75 Ω coaxial
Intermediate frequency
10.7 MHz
40 W
CMT-EP404:
CMT-EP505/EP404:
38W
AM tuner section
Tuning range
Pan-American model:
0.5 W (in the standby
mode)
530 - 1 710 kHz
(with the interval set at
10 kHz)
Other models:
CMT-EP505:
40 W
531 - 1 710 kHz
(with the interval set at
9 kHz)
531 -1 602 kHz
(with the interval set at
9 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
530 - 1 710 kHz
(with the interval set at
10 kHz)
Dimensions (w/h/d):
Approx. 145 × 240 × 252 mm
Mass:
CMT-EP505:
CMT-EP404:
European model:
Other models:
Approx. 3.5 kg
Approx. 3.1 kg
Supplied accessories:
AM loop antenna (1)
(CMT-EP505 only)
Remote Commander (1)
Batteries (2)
FM lead antenna (1)
(CMT-EP505 only)
Antenna
CMT-EP505:
Supplied AM loop
antenna
Built-in ferrite bar antenna
450 kHz
Design and specifications are subject to change
without notice.
CMT-EP404:
Intermediate frequency
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|