4-239-335-11 (1)
Micro Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the bottom of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. _______________
Serial No. _______________
CMT-EP303
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
List of Button Locations and
Reference Pages
Tape
Loading a tape ..................................... 12
Playing a tape ...................................... 12
Main unit ............................................... 4
Remote control ...................................... 5
Recording to a tape
— CD Synchro Recording/Recording
Manually ....................................... 13
Getting Started
Hooking up the system .......................... 6
Inserting two size AA (R6) batteries into
the remote ........................................ 7
Setting the clock .................................... 7
Sound Adjustment
Adjusting the sound
— MEGA BASS ........................... 14
Turning off the sound
— Muting ...................................... 14
CD
Loading the CD ..................................... 8
Timer
Playing the CD
Falling asleep to music
— Normal Play/Shuffle Play/Repeat
Play.................................................. 8
— Sleep Timer .............................. 14
Waking up to music
Programing the CD tracks
— Daily Timer .............................. 15
— Program Play .............................. 9
Display
Tuner
Using the CD display .......................... 16
Presetting radio stations....................... 10
Listening to the radio
Troubleshooting
— Preset Tuning ........................... 11
— Manual Tuning ......................... 11
Problems and remedies ........................ 16
Additional information
Precautions .......................................... 18
Specifications ...................................... 19
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
List of Button Locations and Reference Pages
Illustration number
How to use this page
Use this page to find the location of buttons and other
parts of the system that are mentioned in the text.
r
MUSIC MENU 9 (14)
R
R
Name of button/part Reference page
Main unit
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
@/1 (power) wh (6)
R – Z
A – P
Remote sensor 0
REPEAT 2 (8)
SHUFFLE wa (8)
TAPE 3 (12)
TIMER indicator 1 (15)
TUNER 6 (10, 11, 13)
TUNER MEM w; (10)
TUNING +/– wd (10, 11)
VOLUME control qa
CD
Cassette compartment qd (12)
CD 4 (8, 9, 13)
. m/M > (go back/go
forward) wd (8, 9)
u (play/pause) wf (8, 9)
Z PUSH OPEN/CLOSE 7 (8)
x (stop) wg (8, 9)
Display Window 5 (8, 9, 10)
ENTER/PGM w; (8, 9, 10, 14)
MEGA BASS 8 (14)
MUSIC MENU 9 (14)
PHONES jack ws
TAPE
PRESET +/– qs (10, 11)
M (fast forward) qh (12)
X (pause) qf (12, 13)
N (play) qk (12)
z (recording) ql (13)
m (rewind) qj (12)
xZ (stop/eject) qg (12, 13)
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
A – P
BUTTON DESCRIPTIONS
m (rewind) M (fast forward)
qg (8)
. (go back) > (go forward)
qg (8, 9)
u (play/pause) qh (8, 9)
`/1 (power) 3 (6)
x (stop) qj (8, 9, 12)
R – Z
REPEAT 6 (8)
SHUFFLE 5 (8)
TAPE qk (12)
TIMER ON/OFF 2 (15)
TUNER/BAND 4 (10, 11, 13)
TUNER MEM/ENTER/PGM 7
(7, 9, 10, 14, 15)
TUNING + 8 (10, 11)
TUNING – qd (10, 11)
VOL (volume) +/– 9
CD/REMAIN ql (7, 8, 9, 13, 15,
16)
CLOCK/TIMER + 8 (7, 14, 15)
CLOCK/TIMER – qd (7, 14, 15)
CLOCK/TIMER/SLEEP SET 1
(7, 14, 15)
MEGA BASS qs (14)
MUSIC MENU qa (14)
MUTING q; (14)
PRESET +/– qf (10, 11)
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Do the following procedure 1 to 2 to hook up your system using the supplied cords and
accessories.
FM antenna
Front speaker (Right)
Front speaker (Left)
1 Connect the front speakers.
Connect the speaker cords to the SPEAKER
terminals as shown below.
2 Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with the
adaptor).
SPEAKER
(IMPED
ANCE USE 4
Ω
)
Insert only the
To turn on the system, press [/ 1 (power).
stripped portion.
Red (3)
L
R
Black (#)
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting two size AA (R6)
batteries into the remote
Setting the clock
1 Turn on the system.
2 Press CLOCK/TIMER/SLEEP SET on
the remote.
3 Press CLOCK/TIMER + or – on the
remote repeatedly to set the clock.
e
4 Press TUNER MEM/ENTER/PGM on the
E
E
remote.
e
The clock starts working.
To adjust the clock
Perform from step 2.
Tip
When the remote no longer operates the system,
replace both batteries with new ones.
Note
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage.
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
2 Press SHUFFLE or ENTER/PGM
(TUNER MEM/ENTER/PGM on the
remote) repeatedly until the mode you
want appears in the display.
Loading the CD
1 Press Z PUSH OPEN/CLOSE down to
Select
To play
open the lid of the CD compartment.
No display
The CD in original order.
2 Place a CD with the label side up on the
(Normal Play)
compartment.
SHUFFLE
The tracks on the CD in random
(Shuffle Play) order.
PROGRAM The tracks on the CD in the order
(Program Play)you want them to be played (see
“Programing the CD tracks” on
page 9).
3 Press u.
Other Operations
Do this
Stop playback Press x.
To
3 Press Z PUSH OPEN/CLOSE down to
close the lid of the CD compartment.
Press u.
Pause
Press again to resume play.
Playing the CD
— Normal Play/Shuffle Play/Repeat
Play
Select a track
Turn ./> clockwise or
counterclockwise (or press . or
> on the remote).
During play, turn and hold m/
M clockwise or counterclockwise
(or keep pressing m or M on the
remote). Release it when you find
the desired point.
Find a point
in a track
This system lets you play the CD in different
play modes.
Playing time
Press REPEAT during play until
“REPEAT” or “REPEAT 1”
appears.
Play repeatedly
(Repeat Play)
REPEAT: For all the tracks on the
CD.
REPEAT 1: For a single track only.
To cancel playing repeatedly, press
REPEAT until “REPEAT” or
“REPEAT 1” disappears.
Remove the CD Press Z PUSH OPEN/CLOSE.
Track number
1 Press CD (CD/REMAIN on the remote).
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Programing the CD tracks
Check the total Press ENTER/PGM (TUNER
number of
programed
tracks
MEM/ENTER/PGM on the remote)
repeatedly in stop mode. Each time
you press the button, the selected
track number and the programed
step number appear in the display
in turn.
— Program Play
You can make a program of up to 28 tracks in
the order you want them to be played.
1 Press CD (CD/REMAIN on the remote),
Cancel Program Press x twice until “PROGRAM”
Play
then place a CD.
disappears from the display. The
program you made will be erased.
2 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote) repeatedly
until “00 PR.01” appears in the display.
Tip
3 Turn ./> clockwise or
counterclockwise (or press . or >
on the remote) until the desired track
appears in the display.
The program you made remains after Program Play
finishes. When Program Play remains in the system’s
memory, “PROGRAM” flashes. To play the same
program again, press CD (CD/REMAIN on the
remote) and ENTER/PGM (TUNER MEM/ENTER/
PGM on the remote), then press u.
Programed step number
Selected track number
(including selected track)
4 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
The track is programed. The next program
step number appears, and “PROGRAM”
flashes.
5 To program additional tracks, repeat
steps 3 to 4.
6 Press u.
Program Play starts.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
4 Press PRESET + or – until the preset
number you want for the station
flashes.
Presetting radio stations
You can preset up to 24 stations for FM and
AM. You can then tune in any of those stations
simply by selecting the corresponding preset
number.
5 Press ENTER/PGM (TUNER MEM/
ENTER/PGM on the remote).
The station is stored.
6 Repeat steps 1 to 5 to store other
There are two ways to store the station presets.
stations.
Method
To
Automatic Tuning
Preset
Automatically tune all of the
stations that can be received in
your area and then store them
manually
Setting presets through
manual tuning
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
Manual Tuning
Preset
Manually tune and store the
radio frequency of your
favourite stations
2 Turn TUNING +/– (or press TUNING + or
– on the remote) repeatedly to tune in
the desired station.
Setting presets through
automatic tuning
3 Press TUNER MEM (TUNER MEM/
ENTER/PGM on the remote).
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
A preset number appears in the display.
The stations are stored from preset number
1.
2 Turn and hold TUNING +/– (or press
and hold TUNING + or – on the remote)
until the frequency indication starts to
change, then release it.
Scanning stops automatically when the
system tunes in a station. “STEREO” (for a
stereo program) appears.
Preset number
If the scanning doesn’t stop
Set the frequency of the desired radio
station as described in steps 2 through 6 of
“Setting presets through manual tuning”.
4 Press PRESET + or – repeatedly to
select the desired preset number.
5 Press ENTER/PGM (TUNER MEM/
3 Press TUNER MEM (TUNER MEM/
ENTER/PGM on the remote).
ENTER/PGM on the remote).
The station is stored.
A preset number appears in the display.
The stations are stored from preset number
1.
6 Repeat steps 1 to 5 to store other
stations.
Preset number
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
2 Press PRESET + or – repeatedly to tune
in the desired preset station.
To
Do this
The preset number appears in the display
for a few seconds.
When only one station is preset, only that
station is tuned.
Tune in a station with a
weak signal
Follow the procedure
described in “Setting
presets through manual
tuning”.
Change the preset
number
Start over from step 1.
Listening to non-preset radio
station
— Manual Tuning
Set another station to
an exsisting preset
number
Start over from step 1.
After step 3, press
PRESET + or –
repeatedly to select the
preset number where you
want to store the other
station and then press
ENTER/PGM (TUNER
MEM/ENTER/PGM on
the remote).
1 Press TUNER (TUNER/BAND on the
remote) repeatedly to select “FM” or
“AM”.
2 Turn TUNING +/– (or press TUNING + or
– on the remote) repeatedly to tune in
the desired station.
Tip
To change the AM tuning interval
(except for the European and Middle
Eastern models)
To improve broadcast reception, adjust the antenna
(for FM) or reorient the main unit itself (for AM).
Disconnect the power cord from the wall outlet
first, and then set the AM FREQ STEP switch
at the rear to 9 kHz or 10 kHz.
Tip
The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first
(see “Presetting radio stations” on page 10).
1 Press TUNER (TUNER/BAND on the
remote).
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape
To
Press
Stop play
Pause
xZ
Loading a tape
X
Press again to resume play.
1 Press xZ.
Fast-forward or rewind m or M
Remove the cassette xZ
2 Insert a tape in deck with the side you
want to play/record facing forward.
Insert with the side
you want to play/
record facing forward.
Playing a tape
You can use TYPE I (normal) tape.
1 Load a recorded tape.
2 Press TAPE.
3 Press N.
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording to a tape
— CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
Steps
Recording from a CD
(CD Synchro Recording)
Recording from the radio
1
2
Load a blank tape.
Press CD (CD/REMAIN on the remote).
Press TUNER (TUNER/BAND on the
remote).
3
4
Load the CD you want to record.
Tune in the station you want to record.
Press z.
Press X and z.
The deck stands by for recording.
PressX again.
To stop recording
Press xZ.
Tip
For recording from a CD to a tape, you can turn
./> clockwise or counterclockwise (or press
. or > on the remote) to select tracks before
step 4.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustment
Timer
Adjusting the sound
Falling asleep to music
— Sleep Timer
Reinforcing the bass sound
You can set the system to turn off after certain
amount of time, so that you can fall asleep to
music.
— MEGA BASS
You can listen to music with stronger bass
tones.
1 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “SLEEP
OFF” appears in the display.
Press MEGA BASS.
“MEGA BASS” appears in the display and the
bass is reinforced.
2 Press CLOCK/TIMER + or – on the
remote to select the minutes until the
player goes off automatically.
Press again to cancel MEGA BASS.
Every time you press the button, the minute
display (the turn-off time) changes as
follows:
Selecting the preset effect
from the music menu
90 y 80 y 70 y … y 10 y OFF
Press MUSIC MENU repeatedly to select
the preset effect you desire.
3 Press TUNER MEM/ENTER/PGM on the
Each time you press the button, the display
changes cyclically as follows:
remote.
ROCK t POP t JAZZ t No display t
ROCK t ...
Do this
To
Start over from step 1.
Change the
time to turn off
Start over from step 1 and select
“OFF” on step 2.
Cancel the Sleep
Timer function
Turning off the sound
— Muting
You can turn off the sound temporarily.
Press MUTING on the remote.
Press again to cancel muting.
Tip
You can also turn up the volume by turning
VOLUME clockwise or turning off the power and
turning it on again.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Do this
Waking up to music
— Daily Timer
Check the setting
Press CLOCK/TIMER/
SLEEP SET on the remote
repeatedly.
Change the setting
Start over from step 1.
You can wake up to music at a preset time.
Make sure you have set the clock (see “Setting
the clock” page 7).
Cancel the timer
operation
Press TIMER ON/OFF on
the remote.
1 Prepare the sound source you want to
play.
• CD: Place a CD.
• Radio: Tune in the preset station you
want (see “Listening to the radio” on
page 11).
2 Adjust the volume.
3 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “ON 0:00”
appears in the display.
4 Set the time to start playback using
CLOCK/TIMER + or – on the remote.
5 Press TUNER MEM/ENTER/PGM on the
remote.
6 Press CLOCK/TIMER/SLEEP SET on
the remote repeatedly until “OFF 0:00”
appears in the display.
7 Set the time to stop playback using
CLOCK/TIMER + or – on the remote.
8 Press TUNER MEM/ENTER/PGM on the
remote.
9 Press CD/REMAIN or TUNER/BAND on
the remote depending on the sound
source you want to play.
10Turn off the power and press TIMER
ON/OFF on the remote.
The TIMER indicator lights up.
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Display
Troubleshooting
Using the CD display
Problems and remedies
If you have any problem using this system, use
the following check list.
Press CD/REMAIN on the remote
repeatedly.
First, check that the power cord is connected
firmly and the speakers are connected correctly
and firmly.
The display changes as follows:
During normal play
Elapsed playing time on the current track t
Remaining time on the current track t
Remaining time on the current CD t
Elapsed playing time on the current track t...
Should any problem persist, consult your
nearest Sony dealer.
General
The clock indication does not show the correct
time.
• A power interruption occurred. Set the clock and
timer settings again.
The clock setting/radio presetting/timer is
canceled.
• The power cord is disconnected or a power
failure occurs longer than half a day.
Redo the following:
— “Setting the clock” on page 7
— “Presetting radio stations” on page 10
If you have set the timer, also redo “Waking up
to music” on page 15.
There is no sound.
• Turn VOLUME clockwise and hold.
• The headphones are connected.
• Insert only the stripped portion of the speaker
cord into the SPEAKER terminal. Inserting the
vinyl portion of the speaker cord will obstruct the
speaker connections.
There is severe hum or noise.
• A TV or VCR is placed too close to the stereo
system. Move the stereo system away from the
TV or VCR.
The timer does not function.
• Set the clock correctly.
• When you used the Sleep Timer, the Daily Timer
will not turn on the system until the Sleep Timer
turns it off.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape Deck
The remote does not function.
• There is an obstacle between the remote and the
system.
The tape does not record.
• No tape in the cassette compartment.
• The tab has been removed from the cassette.
• The tape has reeled to the end.
• The remote is not pointing in the direction of the
system’s sensor.
• The batteries have run down. Replace the
batteries.
The tape does not record nor play or there is a
decrease in sound level.
The color irregularity on a TV screen persists.
• The heads are dirty. Clean them (see “Cleaning
the tape heads” on page 19).
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 19).
The tape does not erase completely.
Speakers
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 19).
Sound comes from one channel or unbalanced
left and right volume.
• Check the speaker connection and speaker
placement.
There is excessive wow or flutter, or the sound
drops out.
Sound lacks bass.
• The capstans or pinch rollers are dirty. Clean
them (see “Cleaning the tape heads” on page 19).
• Check that the speaker’s + and – terminals are
connected correctly.
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized.
Demagnetize them (see “Demagnetizing the tape
heads” on page 19).
CD Player
The CD compartment does not close.
• The CD is not placed properly.
The sound drops out.
Tuner
• The lens is dirty. Clean it with a commercially
available blower.
Noise is heard.
• For FM, move the antenna to reduce the noise.
The CD will not play.
For AM, reorient the main unit itself to reduce
the noise.
• The CD is not lying flat in the CD compartment.
• The CD is dirty.
• The CD is inserted label side down.
Messages
The following message may appear in the
display during operations.
• Moisture condensation has built up. Remove the
CD and leave the system turned on for about an
hour until the moisture evaporates.
NO DISC
• There is no disc on the CD compartment.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the CD
player. Should this occur, the system will not
operate properly. Remove the CD and leave the
system turned on for about an hour until the
moisture evaporates.
Precautions
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
• When you move the system, take out any discs.
On safety
If you have any questions or problems concerning
your stereo system, please consult your nearest Sony
dealer.
• The unit is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the unit itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the cord (mains lead), pull it out by the
plug. Never pull the cord itself.
• Should any solid object or liquid fall into the
component, unplug the stereo system and have the
component checked by qualified personnel before
operating it any further.
Notes on CDs
• Before playing, clean the CD with a cleaning cloth.
Wipe the CD from the center out.
• Do not use solvents.
• Do not expose the CD to direct sunlight or heat
sources.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played on this system. Attempting to
do so may damage the system. Do not use such
discs.
• The AC power cord must be changed only at a
qualified service shop.
• The nameplate is located on the bottom exteror.
Note on CD-R/CD-RW playback
On placement
Discs recorded on CD-R/CD-RW drives may not be
played back because of scratches, dirt., recording
condition or the drive’s characteristics. Besides, the
discs, which are not yet finalized at the end of
recording cannot be played back.
• Place the unit in a location with adequate
ventilation to prevent heat build-up the unit.
• Do not place the unit in an inclined position.
• Do not place the unit in locations where it is;
— Extremely hot or cold
— Dusty or dirty
— Very humid
— Vibrating
Cleaning the cabinet
Use a soft cloth slightly moistened with mild
detergent solution.
— Subject to direct sunlight.
On heat buildup
• Although the unit heats up during operation, this is
not malfunction.
• Place the unit in a location with adequate
ventilation to prevent heat build-up in the unit.
If you continuously use this unit at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To save a tape permanently
Specifications
To prevent a tape from being accidentally recorded
over, break off the cassette tab from side A or B as
illustrated.
Amplifier section
AUDIO POWER SPECIFICATIONS:
(U.S.A. model only)
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Break off the
cassette tab of
side A
with 4 Ω loads both channels driven, from 120
- 10,000 Hz; rates 6 W per channel minimum
RMS power, with no more than 10% total
harmonic distortion from 250 mW to rated
output.
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
Canadian model:
Before placing a cassette in the tape
deck
Take up any slack in the tape. Otherwise the tape may
get entangled in the parts of the tape deck and become
damaged.
Continuous RMS power output (reference)
6 + 6 W
(4 Ω at 1 kHz, 10% THD)
European model:
DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
When using a tape longer than 90
minutes
The tape is very elastic. Do not change the tape
operations such as play, stop, and fast-winding (etc.)
frequently. The tape may get entangled in the tape
deck.
Continuous RMS power output (reference)
6 + 6 W
(4 Ω at 1 kHz, 10% THD)
Music power output (reference)
13 + 13 W
Other model:
Cleaning the tape heads
The following measured at AC 230 V or AC 120 V,
50/60 Hz
Clean the tape heads after every 10 hours of use.
Make sure to clean the tape heads before you start an
important recording or after playing an old tape. Use
separately sold dry-type or wet-type cleaning cassette.
For details, refer to the instructions of the cleaning
cassette.
DIN power output (rated) 4.5 + 4.5 W
(4 Ω at 1 kHz, DIN)
Continuous RMS power output (reference)
6 + 6 W
(4 Ω at 1 kHz, 10% THD)
Outputs
PHONES:
(stereo mini jack)
SPEAKER:
Accepts headphones of
8 Ω or more
Demagnetizing the tape heads
Demagnetize the tape heads and the metal parts that
have contact with the tape every 20 to 30 hours of use
with a separately sold demagnetizing cassette. For
details, refer to the instructions of the demagnetizing
cassette.
Accepts impedance of 4 to
16 Ω
CD player section
System
Compact disc and digital
audio system
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Frequency response
20 Hz - 20 kHz ( 0.5 dB)
continued
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (continued)
Tape player section
General
Recording system
4-track 2-channel stereo
Power requirements
Frequency response
50 - 13 000 Hz ( 3 dB),
using Sony TYPE I
cassette
North American model: 120 V AC, 60 Hz
European model:
Australian model:
Mexican model:
Argentine model:
Taiwan model:
Other models:
230 V AC, 50/60 Hz
230 V AC, 50/60 Hz
120 V AC, 60 Hz
220 - 230 V AC, 50/60 Hz
110 - 120 V AC, 60 Hz
230 V AC, 50/60 Hz
Wow and flutter
0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
0.2% W.Peak (DIN)
Tuner section
FM stereo, FM/AM superheterodyne tuner
Power consumption
U.S.A. model:
25 W
Canadian model:
European model:
25 W
30 W
0.5 W (in the standby
mode)
30 W
FM tuner section
Tuning range
87.5 - 108.0 MHz
FM lead antenna
10.7 MHz
Antenna
Intermediate frequency
Other models:
Dimensions (w/h/d):
Mass:
AM tuner section
Tuning range
Pan-American model:
Approx. 145 × 240 × 252 mm
530 - 1 710 kHz
(with the interval set at
10 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
531 -1 602 kHz
(with the interval set at
9 kHz)
531 - 1 602 kHz
(with the interval set at
9 kHz)
Approx. 2.9 kg
Supplied accessories:
Remote Commander (1)
Batteries (2)
Design and specifications are subject to change
without notice.
European model:
Other models:
530 - 1 710 kHz
(with the interval set at
10 kHz)
Built-in ferrite bar antenna
450 kHz
Antenna
Intermediate frequency
Speaker
Speaker system
Speaker units
Bass-reflex type
Full range 10 cm, cone
type
Nominal impedance
Dimensions (w/h/d)
Mass
4 Ω
Approx. 145 × 237 × 170 mm
Approx. 1.3 kg net per
speaker
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|