Network Surveillance Server
NSR-1200
NSR-1100
NSR-1050H
sony.com/security
click:
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring & Quick Search (Intuitive Main GUI)
The Main GUI (Graphical User Interface)
Features
High Quality Display Capability
High Frame Rate Display
ꢀꢁꢂ
ꢃꢁꢂ
The video readout frame rate of the NSR-1ꢀ00/1100/1050H is
much higher than that of conventional models. With the
NSR-1ꢀ00 connected with 16 cameras, video movement (VGA,
MPEG-4) can be viewed through a monitor much more clearly
and smoothly at approximately ꢀ5 fps.
ꢇꢁꢂ
HDMI Outputs for Full HD Displays
ꢄꢁꢂ
ꢅꢁꢂ
You can view and monitor video via the HDMI interface with Full
HD (19ꢀ0 x 1080) displays. If you use megapixel cameras, you
can view full-resolution images with this equipment. What's more,
you can set a six-screen display layout and still view VGA video in
full resolution.
ꢆꢁꢂ
Application of Full HD Display
(Image simulated)
With the NSR-1ꢀ00/1100/1050H’s user-friendly GUI,you can use
various monitoring functions with intuitive operation,such as
drag-and-drop. You can also run a quick search,and playback
recorded images,while monitoring.
7("
.FHBQJYFM
ꢁꢃꢅꢆꢀYꢀꢇꢄꢆꢈ
(1) Camera Pane
(ꢀ) Monitor Frame (3) Monitor Control
(6) Playback Control
(4) Camera Control (5) Alarm List
7("
Drag-and-drop Operation (Camera Switching)
All cameras connected to the NSR-1ꢀ00/1100/1050H are shown in
a tree configuration in the Camera Pane (1). By dragging a
camera icon and dropping it onto a Monitor Frame (ꢀ), you can
easily view live images from a camera.
.FHBQJYFMꢀYꢁꢂꢀ7("ꢀYꢃ
Easy-to-use Monitoring Functions
7("
7("
7("
7("
7("
7("
On the NSR-1ꢀ00/1100/1050H’s GUI,each Monitor Frame (ꢀ) shows
the status of the video (live or recorded), and the name of the
camera, above each video image. Up to 8 x 8 Monitor Frames
can be used.
By double-clicking a specific Monitor Frame, the display is
switched to Single Monitor Frame mode as below.
By Double-clicking a Frame
ꢀ7("ꢀYꢄ
Expandability and Flexibility
Additional Storage of Up To 2 TB x 7
The NSR-1ꢀ00/1100/1050H has an internal storage of up to
ꢀ TB/1 TB/0.5 TB respectively. Each server can connected up to
seven NSRE-Sꢀ00 units, a ꢀ TB hard disk storage device. With the
NSR-1ꢀ00 in RAID 5 configuration and seven NSRE-Sꢀ00 units, the
total recording capacity is approximately 11 TB (max.).
(Images simulated)
Hot Spot Monitoring/Dual Monitor Support
With the NSR-1ꢀ00/1100/1050H, a specific window in a multi-
camera view (i.e. a larger window within the multi-camera
window) can be assigned as the Hot Spot area, or a second
monitor may be used for this purpose.
The Hot Spot area is used to display an image of interest to get a
more detailed view – this image can be manually selected or
triggered by an alarm.
Remote Viewing by Controller Software
If you install the bundled Controller Software on a personal
computer in a remote location, you can supervise
NSR-1ꢀ00/1100/1050H recording servers simultaneously in various
locations, with flexibility in selecting and viewing live and recorded
images.
IMZ-NS100 Series
In the same series of software solutions, Sony also provides the
IMZ-NS101/NS104/NS109/NS116/NS13ꢀ Intelligent Monitoring
Software. This can be installed on your own Microsoft Windows®
server to monitor and control 1/4/9/16/3ꢀ network cameras,
respectively. It features the same functionality and graphical user
interface as the NSR-1ꢀ00/1100/1050H. The supplied Controller
Software can be used for multiple NSR-1ꢀ00/1100/1050H servers
with IMZ-NS100 Series software.
Monitor 1
Monitor 2 (Hot spot)
(Images simulated)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Monitoring & Quick Search (Intuitive Main GUI)
Sophisticated Search Functions
Camera Pan/Tilt/Zoom (PTZ) Control
Dedicated Search Menu
PTZ network cameras from Sony and other supported brands
can be controlled by the Camera Control pane (4) of the
NSR-1ꢀ00/1100/1050H. In PTZ Direct Control mode, when a point
in the image is clicked, the camera automatically pans and tilts to
make that point the center of the image. You can also zoom into
the image simply by dragging out the specified area of the
image with a mouse.
ꢇꢁꢂ
ꢃꢁꢂ
ꢀꢁꢂ
ꢆꢁꢂ
Zoom
%SBH
ꢅꢁꢂ
ꢄꢁꢂ
;PPN
(Images simulated)
(1) Switching Tab (Normal Search/Object Search)
(Images simulated)
(ꢀ) Search Menu (Search Conditions,VMD,
DEPA™ Setting, etc.)
(3) Image Control (Zoom, etc.)
Audio Monitoring
(4) Playback Control (Reverse, Forward, Stop, etc.)
(5) Display Area (Playback of Searched Images)
(6) Search Result Area
The sound from a microphone connected to the camera can be
monitored at the NSR-1ꢀ00/1100/1050H server. The audio signal is
output from the HDMI or the audio connectors on the rear panel
of the NSR-1ꢀ00/1100/1050H.
Quick Search and Playback While Monitoring
If you click PLAYBACK in the Monitor Control pane (3) of the
NSR-1ꢀ00/1100/1050H,you can play back the images recorded a
certain number of seconds before (this is initially set in the GUI
Setting menu). You can also quickly search for the recorded image
by date/time search in the Monitor Control pane.
Two Search Functions
With the Switching Tab (1) of the NSR-1ꢀ00/1100/1050H, you can
select either Normal Search or Object Search.
• Normal Search
You can search for specific images on the NSR-1ꢀ00/1100/1050H,
by setting search conditions such as the camera name, date,
time,and the type of recording (manual/schedule/alarm/event).
Alarm List Playback
When an alarm recording is executed on the NSR-1ꢀ00/1100/1050H,
the date,time,and the camera name are noted in the Alarm List (5).
Simply by double-clicking a line in the alarm list,you can play back
the recorded image.
• Object Search
You can search for specific images on the NSR-1ꢀ00/1100/1050H,
in the recorded video using intelligent functions. There are two
types of search – Post VMD (Video Motion Detection), and VMF
(Video Motion Filter). With Post VMD, you can search for images
in the recorded video with search conditions that are set after
the recording, such as specific object movements. (see below
1) With VMF, you can search for images in the recorded video
using DEPA (Distributed Enhanced Processing Architecture)
system features. With a VMF search, you should record
metadata with DEPA-enabled cameras during the video
recording. For example, you can count the number of people
who passed a line that is set on the screen. (see below 2)
(Please refer to“What is DEPA?”)
Playback Control and Data Export
With the Playback Control pane (6) on the NSR-1ꢀ00/1100/1050H,
you can control the playback functions such as slow and reverse/
forward. You can also export the still or moving images of your
specified date and time to external media, such as CD-R, DVD-R,
and USB Flash Memory.
Customized Layouts
The Layout Editor on the NSR-1ꢀ00/1100/1050H,is a powerful feature
that creates customized site layouts and allows the user to insert
backgrounds (e.g., a floor plan or campus layout), camera icons,
and company logos.
1. Post VMD Search
2.VMF Search
Monitoring GUI (Customized)
(Images simulated)
(Image simulated)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
What is DEPA Architecture?
Concept of DEPA Architecture
/FUXPSLꢀ$BNBSB 5IFꢀ/43ꢁꢂꢃꢃꢃꢀ4FSJFT
In conventional video analytic systems, the camera only
sends video images to recorders, and video image
analysis is processed solely on the recorder side.
In Sony’s DEPA system, the DEPA-enabled camera sends to
the DEPA-enabled recorder not only video images but
also related metadata such as the camera ID, date/time,
and information about the shot object (size and position).
The recorder checks this metadata with a search filter
called a VMF (Video Motion Filter), to send an alarm
signal when the metadata matches a preset condition of
the VMF. Since the partial image processing is done on
the camera side, the system can be configured in a much
simpler manner, and can be expanded more easily.
*NBHFꢀEBUBꢀJTꢀ
SFDPSEFEꢀCZꢀUIFꢀ
USJHHFSꢀPGꢀUIFꢀBMBSN
*NBHFꢀ
*NBHFT
%BUB
.FUBEBUBꢀJTꢀHFOFSBUFEꢀ
JOꢀ%&1"ꢃFOBCMFEꢀDBNFSBꢀ
"MBSNꢆ
.FUBEBUB
7JEFPꢀ.PUJPOꢀ'JMUFS
7.'ꢄ
.FUBEBUB
$BNBSBꢀ*%ꢁꢀ5JNFꢁꢀ-PDBUJPOꢀBOEꢀ
4J[FꢀPGꢀ0CKFTUꢁꢀFUDꢂ
.FUBEBUB
5IFꢀ/43ꢃꢄꢅꢅꢅꢀ4FSJFTꢀEFUFDUꢀUIFꢀBMBSNꢀ
CZꢀNBUDIJOHUIFꢀNFUBEBUBꢀBOEꢀ7.'
Timeline Mode
Search Results by Timeline or List
The search result on the NSR-1ꢀ00/1100/1050H is
displayed either by timeline or list (6). In a timeline
chart, search results are displayed in different
colors depending on the type of recording. You
can easily playback video just by clicking on a
specific part of the timeline, or on the list.
List Mode
Versatile Recording Functions
There are various recording functions on the NSR-1ꢀ00/1100/1050H:
Schedule Recording with Alarm Marking
While using Schedule Recording, the time when the alarm is
detected can be marked in the timeline. This function enables
images to be searched quickly.
Manual Recording
Manual Recording is started manually anytime the operator wants.
Schedule Recording
"MBSNꢀ&WFOUꢁ3FDPSEJOH
Schedule Recording is started based on a set schedule.
ꢀꢁꢂꢂ
ꢃꢄꢁꢂꢂ
Alarm/Event Recording
There are two types of alarm-triggered recording – Alarm and
Event (i.e.,Activity) Recording. While it is important to initiate
recordings based on video motion detection or alarm signal input,
it is also helpful if the user can define what is considered an alarm.
For example, a camera may be looking at an area where there
are people moving about during office hours, but the recording of
such motion should not be considered a true alarm; it is rather a
normal event or activity. However, such motion out of office hours
should be considered a true alarm, and an action or alert needs
to be initiated. The former is performed by Event Recording and
the latter by Alarm Recording. The date/time of Alarm Recording is
listed in an Alarm List in the main GUI (but this does not occur with
Event Recording). Having this capability accomplishes two things
– it saves on storage (with motion/alarm recording only), and
reduces seek times when searching Alarms and Events.
ꢅꢁꢅ"MBSNꢅSFDPSEJOHꢅTUBSUFE
ꢃꢄꢁꢂꢂ
4DIFEVMFꢁ3FDPSEJOH
ꢀꢁꢂꢂ
ꢅ4DIFEVMFꢅ3FDPSEJOHꢅJTꢅEPOFꢅGSPNꢅꢀꢁꢂꢂꢅUPꢅꢃꢄꢁꢂꢂ
4DIFEVMFꢁ3FDPSEJOHꢁXJUIꢁ"MBSNꢁ.BSLJOHꢁ
ꢀꢁꢂꢂ
ꢃꢄꢁꢂꢂ
ꢅꢁꢅ"MBSNꢅJTꢅNBSLFE
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
Other Key Features
• Privacy Zone Masking
• Data Export to CD-R, DVD-R, USB Media, etc
MPEG4/JPEG Dual Stream
Connected with Sony’s major network cameras,*3 the NSR-1ꢀ00/
1100/1050H can accept both JPEG and MPEG4 from cameras at
the same time. With a limited storage capacity, for example, you
can monitor live video via MPEG4 at frame rates as high as 30 fps,
and record video via JPEG at frame rates as low as 1 fps.
Flexible User Management Setting
All access to the NSR-1ꢀ00/1100/1050H is managed by user
authorization, which is set by the system administrator.
The administrator can simply provide each user with a permission
level selected from the five ready-made levels of operational
permission, or set the accessibility in a more customized way. The
accessible cameras for each user can be set for each camera, or
for each NSR-1ꢀ00/1100/1050H server. When the system is
configured with more than one NSR-1ꢀ00/1100/1050H server, all
user information is shared throughout the whole system.
*3 SNC-RX570/RX550/RX530, SNC-RZ50, SNC-DF85/DF80/DF50, SNC-DM160/DM110,
SNC-CS50/CS20, SNC-CM120, and later models.
Light Funnel Control for Higher Sensitivity
Light Funnel is a technology in Sony’s megapixel network cameras
to provide high sensitivity. By combining the information of four
pixels and handling them as a single pixel, this type of camera
provides sensitivity four times higher than conventional cameras.
With the NSR-1ꢀ00/1100/1050H, there is a menu to control the
Light Funnel settings of applicable cameras; this simplifies control.
(Please note that when Light Funnel technology is applied to a
1ꢀ80 x 960 image, its size becomes 640 x 480.)
Image of Light Funnel Function
-JHIUꢀ'VOOFMꢀ0''
-JHIUꢀ'VOOFMꢀ0/
System Examples
Stand Alone Configuration
Client-Server Configuration
)%.*ꢅ
3(#ꢀ.POJUPS
"OBMPHꢀ$BNFSBTꢀ .BYꢁꢀꢂꢃꢀ6OJUTꢄ
ꢆꢇ
4POZꢆT
/FUXPSL
$BNFSBT
/43ꢈꢂꢉꢉꢉꢀ4FSJFT
ꢆꢂ
/43&ꢈ4ꢇꢉꢉ
)%%ꢀ&YQBOTJPOꢀ6OJU
.BYꢁꢀꢊꢀ6OJUTꢄ
/FUXPSL
4FSWFSꢀ3PPN
4POZꢌT
/FUXPSL
$BNFSBT
)%.*ꢅ
3(#ꢀ.POJUPS
/43ꢁꢂꢃꢃꢃꢀ4FSJFT
ꢆꢇ
5IJSEꢁ1BSUZ
/FUXPSL
$BNFSBT
"9*4ꢀꢁꢂꢃ
/FUXPSLꢀ$BNFSB
!8)3
#
/
-
-
5
.
)
#
!
4
)
/
.
3
/FUXPSL
4/5ꢁ7ꢄꢃꢅ
/FUXPSL
5IJSEꢈ1BSUZ
/FUXPSL
$BNFSBT
.POJUPSJOHꢀ3PPN
$POUSPMMFSꢀ4PGUXBSFꢀ*OTUBMMFEꢀ1$
"9*4ꢀꢁꢂꢃ
/FUXPSLꢀ$BNFSB
"9*4
$
0
.
.
6
/
*
$
"
5
*
0
/
4
"OBMPHꢀ$BNFSBT
ꢆꢂꢀ5IFꢀ/43ꢈꢂꢉꢋꢉ)ꢀDBOꢀCFꢀEJSFDUMZꢀDPOOFDUFEꢀXJUIꢀꢂꢃꢀBOBMPHꢀDBNFSBTꢀBTꢀTUBOEBSEꢁꢀꢀ
5IFꢀ/43ꢈꢂꢂꢉꢉꢅꢂꢇꢉꢉꢀSFRVJSFTꢀBOꢀPQUJPOBMꢀ/4#,ꢈ"ꢂꢃꢀ"OBMPHꢀ&ODPEJOHꢀ,JUꢁ
ꢀ
ꢆꢇꢀ5IFꢀ/43ꢈꢂꢉꢉꢉꢀ4FSJFTꢀIBTꢀUXPꢀBOBMPHꢀ3(#ꢀBOEꢀUXPꢀ)%.*ꢀNPOJUPSꢀPVUQVUꢀ
ꢀ
ꢀ
DPOOFDUPSTꢀPOꢀUIFꢀSFBSꢀQBOFMꢁꢀ
:PVꢀDBOꢀVTFꢀUXPꢀPVUꢀPGꢀUIFꢀGPVSꢀPVUQVUTꢀTJNVMUBOFPVTMZꢀJOꢀBOZꢀDPNCJOBUJPOꢁ
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Products
NSRE-S200
HDD Expansion Unit
SNT-V704
Video Network Station
NSR-RM1
Rack Mount Kit
NSBK-A16
Analog Encoding Kit
Connectors
'SPOUꢀ1BOFMꢀ $PWFSꢀ0QFOꢁꢀꢀ/43ꢁꢂꢅꢃꢃꢆꢂꢂꢃꢃꢆꢂꢃꢄꢃ)
3FBSꢀ1BOFMꢀꢀ/43ꢁꢂꢅꢃꢃꢆꢂꢂꢃꢃ
3FBSꢀ1BOFMꢀꢀ/43ꢁꢂꢃꢄꢃ)
3FBSꢀ1BOFMꢀꢀ/43&ꢁ4ꢅꢃꢃ
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
NSR-1200
NSR-1100
NSR-1050H
Video/Recording
Number of cameras supported
Max. 64 (IP/Analog total)
Max. 64
Max. 32 (IP/Analog total)
Max. 32
Max. 20 (IP/Analog total)
Max. 20
Number of megapixel cameras to be connected
Number of megapixel cameras supported
at full resolution
Max. 8
Max. 4
Number of analog cameras
Video compression (IP camera)
Video compression (Analog camera)
Maximum recording rate (IP/Analog total)*1
Hard disk drives (Physical capacity)
Hard disk drives (Interface)
Hard disk drives (RAID level)
Hard disk drives (Recording capacity)
Optical disc drive
Option (NSBK-A16)
Max. 16
MPEG-4 or JPEG
Option (NSBK-A16)
MPEG-4
480 fps VGA (640 × 480) at JPEG,480 fps CIF (352 x 240)
240 fps VGA (640 × 480) at JPEG,480 fps CIF (352 x 240)
1 TB (500 GB x2)
120 fps VGA (640 × 480) at JPEG,480 fps CIF (352 x 240)
500 GB (500 GB x1)
2 TB (500 GB x4)
Serial ATA
RAID 5
RAID 0
–
Approx. 1366 GB
Approx. 886 GB
Approx. 443 GB
DVD/CD Drive x1 (DVD-R, DVD+R, DVD-ROM, CD-ROM, CD-R, CD-RW)
Supports NSRE-S200 (2000 GB) (Max. 7 Units)
Expansion storage
Analog Camera Input
Analog camera interface
Video input x16, Audio input x4 (Supplied cable)
MPEG-4
Video compression
NTSC:704 x 480, 704 x 240, 352 x 240
PAL :704 x 576, 704 x 288, 352 x 288
Option (NSBK-A16)
Resolution
NTSC:120 fps 704 x 480, 240 fps 704 x 240, 480 fps 352 x 240
PAL :100 fps 704 x 576, 200 fps 704 x 288, 400 fps 352 x 288
2
Maximum frame rate
*
Video Output
Monitor OUT 1*3
Monitor OUT 2*3
Audio Output
Audio line OUT
HDMI™ (Type A) x1 and D-sub 15-pin x2 (Front and rear)
HDMI (Type A) x1 or D-sub 15-pin x1 (Rear)
RCA-pin L/R x1 Stereo Pair
Sensor Input/Alarm Output
Sensor input
8-channel photo-coupler (DC 3.3 to 24 V)
Alarm output
8-channel mechanical relay (Max. DC 24 V/ 1 A)
Other Interfaces
Ethernet*4
1000BASE-T/100BASE-TX/10BASE-T x4 (Auto switching)
USB2.0 x3 (Front), USB2.0 x3 (Rear)
RS-232C :D-sub 9-pin x1
USB
Serial interface (for UPS)
Serial interface (for analog camera control)*5 RS-232C :D-sub 9pin x1, RS-422/485 x1
Serial attached SCSI (SAS1.1)
General
SFF-8088 (mini-SAS 26-pin) x1
1
1
Dimensions (W x H x D)
Weight
17 x 3 /2 x 16 /2 inches (430 x 87 x 417 mm) excluding protrusions
Approx. 29 lb 12 oz (13.5 kg)
AC 100 V to 127 V/ 200 V to 240 V (50/60 Hz)
Approx. 265 W (typical) (Max. 350 W)
41 to 104 ˚F (5 to 40 ˚C)
Approx. 26 lb 7 oz (12 kg)
Approx. 25 lb 6 oz (1.5 kg)
Power requirements
Power consumption
Operating temperature
Operation humidity
Approx. 185 W (typical) (Max. 350 W)
Approx. 175 W (typical) (Max. 350 W)
20 to 80 %
Analog camera input cable (NSR-1050H only), Front panel key (2),Installation manual,First step guide,Monitoring window operations guide,Safety regulations,WEEE booklet,
Warranty booklet,Rubber foot (4)
Supplied accessories
1
2
3
*
*
*
With 16 cameras connected. JPEG compression by a standard rate.
*
Total of all the channels. Maximum frame rate for one channel is 30 fps (NTSC)/ 25 fps (PAL).
5
More than one connector cannot be used at a time.
4
Port #1 is for network connection. Port #2 is for connecting controlers. Port #3 and #4 is for the future expansion.
*
VISCA and Pelco-D are supported.
NSRE-S200
NSBK-A16
Storage Capacity
Physical capacity
Video / Audio Interfaces
2 TB (500 GB x4)
Serial ATA
Number of analog input
Video compression
Input video format
Video input x16/Audio input x4
MPEG-4
Interface
Hard disk
drive
NTSC or PAL
NTSC:704 x 480, 704 x 240, 352 x 240
PAL :704 x 576,704 x 288,352 x 288
NTSC:120 fps 704 x 480,240 fps 704 x 240,480 fps 352 x 240
RAID level
RAID 5
Analog
input
Recording capacity
Approx. 1396 GB
Resolution
Interfaces
Maximum frame rate*6
Ethernet
100BASE-TX/10BASE-T x1 (Auto switching) (For maintenance)
RS-232C x1 (For maintenance)
PAL
:
100 fps 704 x 576,200 fps 704 x 288,400 fps 352 x 288
Serial interface
General
Serial attached SCSI (SAS1.1)
General
SFF-8088 (mini-SAS 26pin):input x1, output x2
Dimensions (Board)
Cable length
Approx. 6.6 x 2.5 inches (168 x 64 mm)(exclusive projections)
Approx. 11.8 inches (300 mm)
Approx. 2.5 oz (72 g)
16.9 x 3.4 x 16.4 inches (430 x 87 x 417 mm)
(Excluding protrusions)
Approx. 26 lb 7 oz (12 kg)
AC 100 to 127 V/200 to 240 V (50/60 Hz)
Approx. 80 W (typical) (Max. 350 W)
41 to 104 ºF (5 to 40 ºC)
Board
Weight
Dimensions (W x H x D)
Cable
Approx. 8.3 oz (235 g)
Weight
Input connector (Board)
DVI-connector
Power requirements
Power consumption
Operating temperature
Operating humidity
Connector Video input connector (Cable) Composite BNC x16 (Black)
Audio input connector (Cable) RCA x4 (White)
Operating temperature
Operating humidity
Supplied accessories
41 to 104 ˚F (5 to 40 ˚C)
20 to 80 %
20 to 80 %
Mini-SAS cable (1 m),Front panel key (2),Installation manual,
Safety regulations,WEEE booklet,Warranty booklet,Rubber foot (4)
Supplied accessories
Analog camera input cable,Installation manual,Warranty booklet
6
*
Total of all the channels. Maximum frame rate for one channel is 30 fps (NTSC)/ 25 fps (PAL).
© 2009 Sony Electronics Inc.All rights reserved.
Reproduction in whole or in part without written permission is prohibited.
Features and specifications are subject to change without notice.
All non-metric weights and measurements are approximate.
Sony, IPELA, and DEPA are trademarks of Sony.
Windows is a registered trademark of Microsoft Corporation.
HDMI is a trademark or a registered trademark of HDMI Licensing LLC.
Sony Electronics Inc.
1 Sony Drive
Park Ridge, NJ 07656
sony.com/security
click:
S-IP2027-A (MK10552V2)
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in USA (2/09)
|