Sony Projector SRX R105 User Manual

3-872-930-01 (1)  
SR Projector  
JP  
取扱説明書 ____________________________________________  
GB  
Operating Instructions ___________________________________  
お買い上げいただきありがとうございます。  
電気製は安全のための注事項を守らないと、  
火災や人身事故になることがあります。  
この取扱説明書には故を防ぐための重 な注事項と製の取り扱いかたを示していま  
す。この取扱説明書をよくお読みのうえ、を安全にお使いください。  
お読みになったあとは、いつでも見られるところに必ず保管してください。  
付属の CD-ROM には、SRX-R110/SRX-R105 の取扱説明書(日本語、英  
語、フランス語、ドイツ語、イタリア語、スペイン語、中国語)が記録されて  
います。詳しくは、9 (JP) ページの「CD-ROM マニュアルの使いかた」をご  
覧ください。  
The supplied CD-ROM includes the Operating Instructions for the SRX-  
R110/SRX-R105 (English, Japanese, French, German, Italian, Spanish and  
Chinese versions).  
For more details, see “Using the CD-ROM Manual” on page 6 (GB).  
SRX-R110  
SRX-R105  
© 2005 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Chapter 1 Overview  
Precautions ......................................................................................5  
Using the CD-ROM Manual .............................................................6  
CD-ROM System Requirements........................................................... 6  
Preparations........................................................................................... 6  
Reading the CD-ROM Manual.............................................................. 6  
Features............................................................................................7  
Location and Function of Controls................................................8  
Front/Top............................................................................................... 8  
Left Side/Rear........................................................................................ 9  
Control Function Menu Window .......................................................... 9  
Remote Commander............................................................................ 11  
GB  
Chapter 2 Preparations  
Precautions on Installation...........................................................13  
Unsuitable Installation......................................................................... 13  
Unsuitable Conditions ......................................................................... 14  
Installation......................................................................................14  
Using the Carrying Handles ................................................................ 14  
Using the Adjusters ............................................................................. 14  
Installing the Projector ........................................................................ 15  
Installing the SRX Controller in a Computer for Controlling the  
Projector ..................................................................................15  
System Requirements.......................................................................... 15  
Installing the SRX Controller.............................................................. 15  
Connecting a Computer for Controlling the Projector...............17  
Connecting the Computer via the Ethernet ......................................... 17  
Connecting the Computer via the RS-232C........................................ 17  
Starting the SRX Controller ..........................................................18  
Starting the SRX Controller ................................................................ 18  
Changing the Connection Mode.......................................................... 18  
Connecting the Projector..............................................................19  
Connecting with HD-SDI Equipment ................................................. 19  
Connecting with Component/Video GBR Equipment ........................ 19  
Connecting with a Computer............................................................... 20  
3 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 3 Projecting  
Projecting the Picture ...................................................................21  
Using the Remote Commander ........................................................... 21  
Using the Computer for Controlling the Projector.............................. 23  
Chapter 4 Adjustments and Settings Using the SRX Controller  
Displaying the Control Function Menu Window.........................25  
PICTURE CONTROL Window .......................................................26  
Input Source ........................................................................................ 26  
Signal Info (Information) .................................................................... 26  
Signal Adjust ....................................................................................... 27  
COLOR/FRAME Window ...............................................................27  
Color.................................................................................................... 27  
Frame Adjust ....................................................................................... 28  
INSTALLATION Window................................................................28  
LENS CONTROL ............................................................................... 28  
PROGRESSIVE DISPLAY MODE ................................................... 28  
LAMP POWER................................................................................... 28  
INSTALLATION................................................................................ 29  
LAMP SELECT .................................................................................. 29  
TEST PATTERN ................................................................................ 29  
Input Signals And Adjustable/Setting Items ...............................30  
Chapter 5 Others  
Lamp Life........................................................................................31  
Troubleshooting ............................................................................32  
Error Messages..............................................................................33  
Specifications ................................................................................35  
Index ...............................................................................................38  
GB 4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Overview  
1
Chapter  
projector. Be aware that room heat rises to the ceiling;  
check that the temperature near the installation location  
is not excessive.  
• Install the projector on the floor or hang it from the  
ceiling. Any other installation causes a malfunction such  
as color irregularity or a shorten lamp life.  
• Do not install the unit in a location near heat sources  
such as radiators or air ducts, or in a place subject to  
direct sunlight, excessive dust or humidity, mechanical  
vibration or shock.  
Precautions  
On safety  
• Operate the unit on 200 – 240 V AC, 50/60 Hz (SRX-  
R110), or 100 – 240 V AC, 50/60 Hz (SRX-R105).  
• Should any liquid or solid object fall into the cabinet,  
unplug the unit and have it checked by qualified Sony  
personnel before operating it further.  
• Unplug the unit from the wall outlet or set the power  
switch to the lower position if it is not to be used for  
several days.  
• To disconnect the cord, pull it out by the plug. Never pull  
the cord itself.  
• The wall outlet should be near the unit and easily  
accessible.  
• The unit is not disconnected from the AC power source  
(mains) as long as it is connected to the wall outlet and  
the power switch is set to the upper position.  
• Do not look into the lens while the lamp is on.  
• Do not place your hand or objects near the ventilation  
holes. The air coming out is hot.  
• To avoid moisture condensation, do not install the unit in  
a location where the temperature may rise rapidly.  
On illumination  
• To obtain the best picture, the front of the screen should  
not be exposed to direct lighting or sunlight.  
• Ceiling-mounted spot lighting is recommended. Use a  
cover over fluorescent lamps to avoid lowering the  
contrast ratio.  
• Cover any windows that face the screen with opaque  
draperies.  
• It is desirable to install the projector in a room where  
floor and walls are not of light-reflecting material. If the  
floor and walls are of reflecting material, it is  
recommended that the carpet and wall paper be changed  
to a dark color.  
• Have at least four people carry and handle the projector,  
to avoid accidents or injury.  
• Avoid using an extension cord with a low voltage limit,  
as it may cause short-circuiting and physical injury.  
• To carry the projector, be sure to use the carrying  
handles. Do not hold other parts of the projector,  
especially the lens, nor catch your finger between the  
handle, floor, and the projector.  
• Do not catch your finger between the unit and surface of  
the floor when moving the projector installed on the  
floor.  
On preventing internal heat build-up  
After turning off the power, the cooling fan runs for about  
10 minutes while the STATUS LAMP indicator flashes in  
green.  
Caution  
The projector is equipped with ventilation holes (intake) at  
the front, upper side and right side, and ventilation holes  
(exhaust) at the rear and upper side.  
• Be careful not to catch your finger in the cooling fan.  
Do not block or place anything near these holes, or internal  
heat build-up may occur, causing picture degradation or  
damage to the projector.  
On installation  
• Allow adequate air circulation to prevent internal heat  
build-up. Do not place the unit on surfaces (rugs,  
blankets, etc.) or near materials (curtains, draperies) that  
may block the ventilation holes. Leave space of more  
3
than 100 cm (39 /8 inches) between the wall and the  
5 GB  
Precautions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
On cleaning  
• To keep the cabinet looking new, periodically clean it  
with a soft cloth. Stubborn stains may be removed with  
a cloth lightly dampened with a mild detergent solution.  
Never use strong solvents, such as thinner, benzene, or  
abrasive cleansers, since these will damage the cabinet.  
• Avoid touching the lens. To remove dust on the lens, use  
a soft dry cloth. Do not use a damp cloth, detergent  
solution, or thinner.  
Using the CD-ROM  
Manual  
The supplied CR-ROM includes versions of the Operating  
Instructions for the SRX-R110/R105 in English, Japanese,  
French, German, Italian, Spanish, and Chinese.  
On repacking  
CD-ROM System Requirements  
Save the original shipping carton and packing material;  
they will come in handy if you ever have to ship your unit.  
For maximum protection, repack your unit as it was  
originally packed at the factory.  
The following are required to access the supplied CD-  
ROM disc.  
• Computer: PC with Intel Pentium CPU  
–Installed memory: 64 MB or more  
–CD-ROM drive: ×8 or faster  
• Monitor: Monitor supporting resolution of 800 × 600 or  
higher  
• Operating system: Microsoft Windows Millennium  
Edition, Windows 2000 Service Pack 2, Windows XP  
Professional or Windows XP Home Edition  
When these requirements are not met, access to the CD-  
ROM disc may be slow, or not possible at all.  
Preparations  
One of the following programs must be installed on your  
computer in order to use the Operating Instructions  
contained on the CD-ROM disc.  
• Adobe Acrobat Reader Version 4.0 or higher  
• Adobe Reader Version 6.0 or higher  
Note  
If Adobe Reader is not installed, you can download it from  
the following URL:  
Reading the CD-ROM Manual  
To read the Operating Instructions contained on the CD-  
ROM disc, do the following.  
1 Insert the CD-ROM disc in your CD-ROM drive.  
A cover page appears automatically in your browser. If  
it does not appear automatically in the browser, double-  
click the index.htm file on the CD-ROM disc.  
2 Select and click the Operating Instructions that you  
want to read.  
This opens the PDF file of the Operating Instructions.  
GB 6  
Using the CD-ROM Manual  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes  
Features  
• If you lose the CD-ROM disc or become unable to read  
its content, for example because of a hardware failure,  
you can do one of the following.  
- You can purchase a new CD-ROM disc to replace one  
that has been lost or damaged. Contact your Sony  
service representative.  
- You can purchase printed versions of the Operating  
Instructions (English version). Contact your Sony  
service representative.  
When ordering, be sure to specify the part number of the  
manual you want.  
High Brightness, High Picture Quality  
High brightness  
The SRX-R110 uses two 2kW Xenon lamps as a light  
source, and the SRX-R105 uses two 1kW Xenon lamps.  
These compact-size Xenon lamps provide high brightness  
of 10,000 ANSI lumens for the SRX-R110 and 5,000  
ANSI lumens for the SRX-R105, assuring excellent  
uniformity on the entire screen.  
Part number  
Models covered  
3-869-836-01  
SRX-R110/R105  
High resolution  
Sony’s new, unique three SXRD™ (Silicon X-tal  
Reflective Display) panels with approximately 8,850,000  
pixels realizes a high-resolution of 4096 × 2160 dots. The  
resolution corresponds to four times that of an HDTV  
image and meets the “4K” quality resolution level of  
Digital Cinema.  
• Intel and Pentium are registered trademarks of Intel  
Corporation or its subsidiaries in the United States and  
other countries.  
• Microsoft and Windows are registered trademarks of  
Microsoft Corporation in the United States and/or other  
countries.  
• Adobe, Acrobat, and Adobe Reader are trademarks of  
Adobe Systems Incorporated in the United States and/or  
other countries.  
Multi-screen mode  
The high resolution of the projector enables single-, dual-  
and quad-mode projection in which full HD images can be  
displayed even in each of two or four divided screens.  
Images from different input sources can be displayed in  
these divided screens simultaneously.  
High contrast ratio  
The combination of the SXRD imaging devices and 3PBS  
optical devices offers a high contrast ratio of more than  
1800:1.  
Gamma correction circuit  
Three types of gamma correction circuit, 1.8, 2.2 and 2.6,  
are selectable according to the signal input, allowing  
projection of an image with optimum brightness.  
Color space feature  
The projector supports three standards of color tonal  
reproduction range, DCDM, 709 and CIEXYZ, allowing  
you to obtain an image with precise color reproduction  
according to the input sources.  
Flexible and Reliable System  
Dual lamp system  
The projector adopts a dual lamp system for versatility of  
use. You can select dual-lamp or single-lamp mode, and  
can reduce each lamp’s power output. These modes allow  
you to save power and increase lamp life.  
Also, if one bulb burns out, the other keeps projecting  
images.  
7 GB  
Features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Versatile Setup  
Location and Function of  
Controls  
Various signal input  
The projector is equipped with an RS232C connector and  
ETHERNET connector for communication. For signal  
inputs, the projector has four slots to which the optional  
analog input boards and HD-SDI input boards can be  
attached according to your requirement.  
Front/Top  
Optional lens  
Four optional zoom lenses are available depending on the  
projection distance you are setting up. The lens shift  
function of this projector enables easy setup.  
1
2
3
4 5 6 7  
8
a Remote control detector (front)  
b Upper side ventilation holes (intake)  
c Upper side ventilation holes (exhaust)  
d Adjusters  
Use to keep the projector level if it is installed on an  
uneven surface.  
e Lens cover  
f Lens mount part  
When attaching the optional lens, consult with qualified  
Sony personnel.  
g Carrying handle  
Use to carry the projector. There is another handle on the  
rear side.  
h Front/right side ventilation holes (intake)  
GB 8  
Location and Function of Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu window or by pressing the 1 button on the Remote  
Commander.  
Left Side/Rear  
h INTER LOCK jack (minijack)  
Connects to the external emergency switch.  
When you use the interlock function, insert the mini-plug  
into this jack to open the + and – terminals. The projector’s  
lamps will be turned off immediately. When not in use, do  
not insert the mini-plug.  
1
2
i ETHERNET connector (10BASE-T/100BASE-TX)  
Connect to the ethernet connector on a computer in which  
the supplied SRX Controller is installed. You can control  
the projector from the computer.  
j RS232C connector (D-sub 9-pin, female)  
Connect to the RS-232C connector on a computer in which  
the supplied SRX Controller is installed. You can control  
the projector from the computer.  
3
k Input board attachment parts  
Depending on the input sources, attach the optional LKRI-  
001 or LKRI-002 input board to each slot. They are  
arranged in order of INPUT A, INPUT B, INPUT C and  
INPUT D from the top.  
4 5 6 78 9 0 qa  
For attachment, contact a qualified sony personnel.  
a Cooling unit  
A cooling fan and the two lamp houses are installed here.  
For replacement of the projection lamp or lamp house,  
consult with qualified Sony personnel.  
Control Function Menu Window  
When you install the supplied SRX Controller in your  
computer, you can operate all of the features of the projector  
in your computer window. This section explains the  
functions of the parts for projecting an image on the screen.  
b Upper/rear side ventilation holes (exhaust)  
c Remote control detector (rear)  
For the windows used for the settings and adjustments, see  
“Adjustments and Settings Using the SRX Controller” on  
page 25.  
d Power switch  
Set the switch to the upper position to turn on the main  
power of the projector. To turn it off, set the switch to the  
lower position.  
1
2
3
4
5
e AC IN terminal board  
Connect the AC power cord with three wires (not  
supplied).  
For connection of the AC power cord, contact a qualified  
Sony peraonnel.  
f STATUS MESSAGE window  
Displays an error message. If the message is displayed,  
contact a qualified Sony personnel.  
g STATUS LAMP indicator  
Lights red when the projector is in standby mode. When  
the power is turned on, it lights green. The indicator flashes  
for about 10 minutes after the power is turned off by  
clicking “POWER STANDBY 1” in the Control Function  
67  
6
9 GB  
Location and Function of Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
a Menu bar  
message is displayed in the STATUS MESSAGE  
window on the left side of the projector.  
d POWER ON/STANDBY (?/1) buttons and  
POWER indicator  
File menu  
Click ON to turn on the lamp. The indicator lights green.  
Clicking STANDBY opens the confirmation dialog.  
Clicking “OK” makes the projector enter standby mode.  
The indicator flashes green. Even in standby mode, the  
fans continue to run to reduce internal heat. When the fans  
stop running, the indicator lights red.  
Selecting “Quit” from the File menu exits the SRX  
Controller.  
Back menu  
Click to return to the Browser Screen window of the SRX  
Controller.  
Password menu  
e FUNCTION 1/2/3 radio buttons  
Use to set the authentication passwords required for  
displaying the SETTING window and the SERVICE  
window. The Password menu can be displayed only when  
an authorized administrator starts the SRX Controller on  
the computer for controlling the projector.  
Register the data set or adjusted with “Signal Adjust” in  
the PICTURE CONTROL window and “Color” in the  
COLOR/FRAME window. You can recall it later to  
project the image with that setting.  
For details, see “To register the settings that have been  
adjusted” on page 25.  
For details on the SETTING window and the SERVICE  
window, refer to the Installation Manual for Dealers.  
f Window select buttons  
Open the window with the items you want to set or adjust.  
Help menu  
Shows the version and serial number of the SRX  
Controller.  
g Adjustment/setting window  
Clicking the window select button switches the window  
for the adjustment and setting.  
b SCREEN CONTROL window  
The “PICTURE CONTROL,” “COLOR/FRAME” and  
“INSTALLATION” windows can be displayed.  
For details, see “SCREEN CONTROL window” on page  
10.  
For details on each window, see “Adjustments and  
Settings Using the SRX Controller” on page 25.  
c Information window  
SCREEN CONTROL window  
1
2
3
4
5
Location: Shows the location where the projector is  
installed, as set in the SETTING window at the time  
of installation.  
Name: Shows the name of the projector that was set in the  
SETTING window at the time of installation.  
Operation Timer: Shows the operation hours of the  
projector.  
Lamp A/Lamp B: Shows an approximate percentage to  
indicate the time used before the recommended time  
for replacement of each projection lamp (i.e. 100%  
indicates the time for replacement). The indicator on  
the left lights when the corresponding lamp turns on.  
It does not light when the corresponding lamp turns  
off.  
a Screen mode buttons  
Select single-, dual- or quad-screen mode for multiple  
display mode. Click  
for quad mode.  
for single,  
for dual and  
b CUT OFF “ON/OFF” buttons  
Click the ON button to cut off the picture momentarily.  
Click the OFF button to restore the picture.  
The SCREEN CONTROL window changes depending on  
the screen mode selected with the screen mode button (1).  
When dual- or quad-screen mode is selected, the buttons  
function independently on each divided screen.  
Warning Info: Displays an error message if there is any  
warning information on the projector. The same  
GB 10  
Location and Function of Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
c Input signal select drop-down list box  
Selects the input signal you want to project on the screen.  
The SCREEN CONTROL window changes depending on  
the screen mode selected with the screen mode button (1).  
When dual- or quad-screen mode is selected, you can  
select the input independently on each divided screen.  
INPUT A: Selects the signal input from the connectors on  
the optional input board installed in the INPUT A  
section.  
INPUT B: Selects the signal input from the connectors on  
the optional input board installed in the INPUT B  
section.  
INPUT C: Selects the signal input from the connectors on  
the optional input board installed in the INPUT C  
section.  
Remote Commander  
1
SCREEN  
MODE  
I
1
MUTING  
2
1
2
4
3
4
FUNCTION  
1
2
3
INPUT SEL  
5
A
B
C
D
PICTURE CONT  
+
+
+
CONTR  
BRIGHT  
SHARP  
6
SCREEN SEL  
INPUT D: Selects the signal input from the connectors on  
the optional input board installed in the INPUT D  
section.  
1
3
2
4
7
8
d MUTING ON/OFF buttons  
LENS CONT  
+
+
+
Clicking the ON button cuts off the whole picture on the  
screen momentarily. Click the OFF button to restore the  
picture. Activating the muting function blocks off lamp  
light completely by use of a shutter, and displays the black  
signal on the whole screen.  
FOCUS  
ZOOM  
SHIFT  
e OSD ON/OFF buttons  
Click the OFF button to eliminate the on-screen display.  
Click the ON button to display it on the screen.  
The buttons also function when you operate the projector  
with the Remote Commander.  
SR Projector  
IR  
RM-PJ4K  
a ?/1 (power on/standby) buttons  
?: Press to turn on the projector.  
1: Press to make the projector enter standby mode.  
b SCREEN MODE button  
Selects single-, dual- or quad-screen mode for multiple  
display mode. Each press of the button changes the mode,  
1 (single), 2 (dual) and 4 (quad), in this order.  
c MUTING button  
Press to cut off the whole picture on the screen. Press it  
again to restore the picture. Activating the muting function  
blocks off lamp light completely by use of a shutter, and  
displays the black signal on the whole screen.  
d FUNCTION 1/2/3 buttons  
Use these buttons in synchronization with the FUNCTION  
buttons in the Control Function Menu window of the SRX  
Controller. You can recall the data set or adjusted with the  
SRX Controller.  
e INPUT SEL A/B/C/D buttons  
Select the input source you want to project or operate.  
A: Selects the signal input from the connectors on the  
optional input board installed in the INPUT A section.  
11 GB  
Location and Function of Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B: Selects the signal input from the connectors on the  
optional input board installed in the INPUT B section.  
C: Selects the signal input from the connectors on the  
optional input board installed in the INPUT C section.  
D: Selects the signal input from the connectors on the  
optional input board installed in the INPUT D section.  
SHIFT +/–: Adjust the vertical picture position. Pressing  
the + button moves the picture upward. Pressing the –  
button moves the picture downward.  
To install batteries  
1
Remove the lid, then install the two size AA (R6)  
batteries (supplied) with the correct polarity.  
Use these buttons together with the PICTURE CONT  
buttons (6) or SCREEN SEL buttons (7).  
Example: When you want to increase the contrast of the  
signal input from the INPUT A board, press INPUT  
SEL A button, then press the CONTR + button.  
Push the knob to open  
the lid.  
Be sure to install the battery  
from the – side.  
f PICTURE CONT (Picture control) buttons  
Adjust the projected picture quality.  
CONTR+/–: Adjust the contrast. Pressing the + button  
increases the contrast. Pressing the – button decreases  
the contrast.  
BRIGHT +/–: Adjust the picture brightness. Pressing the  
+ button makes the picture brighter. Pressing the –  
button makes the picture darker.  
2
Replace the lid.  
SHARP +/–: Adjust the picture sharpness. Pressing the +  
button makes the picture sharper. Pressing the –  
button makes the picture softer.  
Notes  
• Be sure that there is nothing to obstruct the infrared  
beam between the Remote Commander and the  
projector. Direct the Remote Commander toward one of  
the remote control detectors at the front and rear of the  
projector when operating.  
• The operation range is limited. The shorter the distance  
between the Remote Commander and the projector, the  
wider the angle within which the Commander can  
control the projector.  
In multiple screen mode, adjustment can be made for the  
input signal from each input board.  
Select the input signal with the INPUT SEL A/B/C/D  
buttons (5), then adjust the picture with these buttons. In  
single-screen mode, you need not press the INPUT SEL  
button.  
Example: When you want to increase the contrast for the  
signal input from the INPUT A board, press the  
INPUT SEL A button, then press the CONTR +  
button.  
g SCREEN SEL buttons  
In multiple screen mode, select one of the divided screens  
where you want to project the selected signal from each  
input board.  
Select the input signal with one of the INPUT SEL A/B/C/  
D buttons (5), then select the screen with one of these  
buttons.  
Example: When you want to project the signal input from  
the INPUT B board on Screen 3 (lower left screen),  
press the INPUT SEL B button, then press the  
SCREEN SEL 3 button.  
h LENS CONT buttons  
FOCUS +/–: Adjust the focus. Pressing the + button  
focuses on a forward picture. Pressing the – button  
focuses on a picture further back.  
ZOOM +/–: Adjust the picture size. Pressing the + button  
enlarges the picture size. Pressing the – button  
reduces the picture size.  
GB 12  
Location and Function of Controls  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparations  
2
Chapter  
activating the protection circuit. Be sure not to block the  
ventilation holes for exhaust. Leave a space of more than  
1 m (39 /8 inches) around the unit.  
Precautions on  
Installation  
3
Extremely hot and humid  
Unsuitable Installation  
Do not install the projector in the following situations.  
Such installations may cause a malfunction or damage to  
the projector.  
Poorly ventilated  
Location subject to sudden change of  
temperature  
The projector is equipped with ventilation holes for intake  
and exhaust to prevent internal heat build-up. Do not place  
the projector in a place where the ventilation holes may be  
blocked.  
Situation that may block the ventilation  
holes for exhaust  
A sudden change of temperature may produce moisture  
condensation, causing damage to the projector. Take care  
with heaters or air-conditioners.  
Very dusty  
If you put something beside the ventilation holes for  
exhaust on the side or rear of the projector, the exhaust  
may be inhaled into the projector through the ventilation  
holes for intake, causing internal heat build-up and thereby  
13 GB  
Precautions on Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Unsuitable Conditions  
Installation  
Do not use the projector under the following conditions.  
Laying the unit on its side or upside down  
Tilting the unit to the right or left  
Using the Carrying Handles  
Use the front and rear carrying handles to carry the  
projector.  
Caution  
To avoid injury, have at least four people carry the  
projector using the front and rear handles.  
10°  
Avoid tilting the projector more than 10 degrees, and  
avoid installing it in place other than a floor. Doing so may  
cause color shading or shorten the lamp life excessively.  
Blocking the ventilation holes  
Using the Adjusters  
When the projector installation location is not horizontal,  
rotate the adjusters using a spanner so that the projector is  
placed horizontally. There are an adjuster on the right and  
one on the left.  
Avoid using a thick-piled carpet or anything that covers  
the ventilation holes (exhaust/intake). Otherwise, internal  
heat may build up.  
For the locations of the ventilation holes (exhaust/intake),  
see “Location and Function of Controls” on page 8.  
Spanner  
GB 14  
Installation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caution  
Installing the SRX  
Controller in a Computer  
for Controlling the  
Projector  
Do not turn the spanner forcibly when the screw has fully  
rotated. Otherwise, the spanner may slip and injure your  
hand.  
Installing the Projector  
This section describes briefly how to install the projector  
on the floor. The distance between the center of the lens  
and the screen varies depending on the optional lens  
attached, the horizontal screen size or the input signal.  
If you install the supplied SRX Controller in a computer,  
you can control the projector from the computer.  
For details on installation examples with projection  
distances, see “Installation Manual for Dealers.”  
System Requirements  
The following are required to operate the supplied SRX  
Controller.  
Screen  
• Computer: Intel Celeron CPU, 1 GHz or more  
– Installed memory: 256 MB or more  
– Communication: 10/100BASE-T  
1
310 mm (12 /4 inches)  
– VGA: XGA (1024 × 768) or higher  
– HDD: Connected to a computer via the IDE port,  
Usable memory with 8 MB or more  
Projection distance  
– CD-ROM drive: × 8 or faster  
• Operating System: Microsoft Windows XP Professional  
SP2 (English or Japanese version)  
Vertical positioning (side view)  
Install the projector so that the center of the lens is between  
the bottom edge and the top edge of the screen. You can  
move the picture position vertically by half of the screen  
vertical size using the lens shift adjustment.  
Installing the SRX Controller  
1
Insert the supplied installation disc into the CD-ROM  
drive of a computer.  
Adjustable range with lens  
shift feature  
Center of lens  
Screen  
The setup.exe in the root folder of the installation disc  
starts, and the window for preparing the installation  
appears.  
Horizontal positioning (top view)  
Screen  
Center of lens  
15 GB  
Installing the SRX Controller in a Computer for Controlling the Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After a while, the Welcome page of the SRX  
Controller appears.  
When you want to install it in the currently displayed  
folder, click “Next.”  
If you want to install it in a different folder, click  
“Change…,” specify the folder, click “OK,” then  
click “Next.”  
The installation start window appears.  
2
Click “Next.”  
The License Agreement window appears.  
4
Click “Install.”  
The program installation starts.  
After a while, the following window appears.  
3
Read the license agreement, click “I accept…” if you  
agree to be bound by the terms, and click “Next.”  
The select window of the destination folder in which  
to install the SRX Controller appears.  
5
Click “Finish.”  
Installation of the SRX Controller is completed.  
To restart the SRX Controller immediately after  
installation has been completed, click to check  
“Launch SRX Controller,” then click “Finish.”  
The  
icon is displayed in the desktop window.  
GB 16  
Installing the SRX Controller in a Computer for Controlling the Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ATTENTION  
Connecting a Computer  
for Controlling the  
Projector  
Par mesure de sécurité, ne branchez pas le connecteur d’un  
périphérique ayant une tension excessive à ce port. Suivez  
les instructions pour ce port.  
VORSICHT  
Schließen Sie das Kabel aus Sicherheitsgründen nicht an  
eine Buchse für Peripheriegeräteanschluss an, die eine zu  
hohe Spannung aufweisen könnte. Befolgen Sie die  
Anweisungen für diesen Anschluss.  
Connect a computer for controlling the projector to the  
projector via the ETHERNET connector or the RS232C  
connector.  
Note  
Connecting the Computer via the  
Ethernet  
If the power of the projector remains on for a long period  
of time without the Ethernet cable connected, the message  
“Sony SR Projector Initializing…” may appear in the  
STATUS MESSAGE window while you are setting up for  
networking after connecting the Ethernet cable. This is not  
a malfunction of the projector.  
Connect the computer to the projector using the supplied  
ethernet cable (cross cable).  
Note  
Set the TCP/IP protocol of the connected computer to  
DHCP.  
Connecting the Computer via the  
RS-232C  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
HD  
HD  
VD  
VD  
IN  
OUT  
INTER LOCK ETHERNET  
RS232C  
IN  
OUT  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
HD  
HD  
VD  
VD  
IN  
OUT  
INTER LOCK ETHERNET  
RS232C  
IN  
OUT  
ETHERNET connector  
RS232C connector  
Ethernet cable (cross cable)  
(supplied)  
Connecting cable (not supplied)  
Computer  
Computer  
Ethernet connector  
CAUTION  
RS-232C connector  
For safety, do not connect the connector for peripheral  
device wiring that might have excessive voltage to this  
port. Follow the instructions for this port.  
17 GB  
Connecting a Computer for Controlling the Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
d EMERGENCY STANDBY 1 button  
Clicking the button makes the projectors indicated by  
“Connectable” under “Connection” in the projector detect  
window enter standby mode. The fans continue to run.  
Starting the SRX  
Controller  
e Projector detect window  
Information on all of the projectors connected to a network  
is displayed.  
Starting the SRX Controller  
The following information is shown:  
Alert: Shows whether there is any warning information on  
the projector or not. (x: Yes, s: No)  
Model Name: Model name of the projector  
Serial No.: Serial number of the projector  
IP Address: IP address of the projector  
Connection: Network connection status of the projector  
The projectors that can be selected with the Select  
button are indicated by “Connectable” under  
“Connection.”  
Double-click the  
icon for the SRX Controller in the  
desktop window of the computer.  
The SRX Controller starts and the Browser Screen is  
displayed.  
About the Browser Screen  
1
2
3
4
5
Power: Power on/off status of the projector  
Region: Region where the projector is installed  
Location: Installation location of the projector  
Name: Free name  
To exit the SRX Controller  
Click “Quit” from the File menu on the menu bar.  
Changing the Connection Mode  
When the projector you want to operate is connected to the  
computer via a network, you can also select it by  
specifying the IP address of the projector. Connection via  
the RS-232C is also available.  
a Menu bar  
When connecting the computer via a network by  
specifying the IP address of the projector  
Select “Ethernet” from the Connect menu on the menu bar  
to open the dialog. Enter the IP address of the projector,  
then click “OK.”  
To change the port number, select “PC Port Setting” from  
the Connect menu on the menu bar to display the dialog.  
Enter the new port number in the dialog and click “OK.”  
File  
Select “Quit” from the File menu to exit the SRX  
Controller.  
Connect  
Selects the connection mode between the projector and the  
computer for controlling the projector.  
For details, see “Changing the Connection Mode” on  
page 18.  
When connecting the computer via RS-232C  
Select “RS232C” from the Connect menu on the menu bar  
to open the dialog. Enter the port number of the COM port  
(RS-232C) for the computer, then click “OK.”  
Help  
Select “Version” from the Help menu to display the  
version information of the SRX Controller.  
b Select button  
Selecting the projector displayed in the projector detect  
window and then clicking this button opens the Control  
Function Menu window of the selected projector.  
c Refresh button  
Updates all of information on the projectors displayed in  
the projector detect window.  
GB 18  
Starting the SRX Controller  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting with Component/Video  
GBR Equipment  
Connecting the Projector  
Attach the optional LKRI-001 analog input board to the  
input board attachment part on the projector, and connect  
with a DVD recorder/player or analog video equipment  
equipped with the component output, or an high-definition  
equipment equipped with a video GBR connector.  
When you connect the projector, make sure to:  
• Turn off all equipment before making any connections.  
• Use the proper cables for each connection.  
• Insert the cable plugs firmly; loose connections may  
increase noise and reduce performance of picture  
signals. When pulling out a cable, be sure to pull it out  
from the plug, not the cable itself.  
• When installing the optional input board, consult with  
the Sony dealer.  
Refer also to the instruction manuals of the equipment to  
be connected.  
Left side  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
R(PCr) G(Y) B(PCb)  
HD  
HD  
VD  
VD  
IN  
UT  
Connecting with HD-SDI Equipment  
INTER LOCK ETHERNET  
RS232C  
IN  
UT  
Attach the optional LKRI-002 HD-SDI (4:2:2) input board  
to the input board attachment part, and connect the  
HDCAM recorder/player.  
R/Pr / G/Y / B/Pb  
connectors  
Component cable, etc  
(not supplied)  
Left side  
IN  
IN  
OUT  
OUT  
to component output/  
video GBR  
INTER LOCK ETHERNET  
RS232C  
Betacam, DVD recorder/player, etc.  
IN connector  
Note  
HD-SDI connecting cable  
(not supplyed)  
When connecting to the output of HD component  
equipment, set “Signal Mode” of “Input Source” in the  
PICTURE CONTROL window to “Y/Pb/Pr,” and when  
connecting to the output of HD video GBR equipment, set  
to “RGB.”  
to HD-SDI output  
III
For details, see page 26.  
HDCAM recorder/player, etc.  
19 GB  
Connecting the Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting with a Computer  
Attach the optional LKRI-001 analog input board to the  
input board attachment part on the projector, and connect  
with a computer.  
Left side  
R(Pr/Cr) G(Y/Y) B(Pb/Cb)  
R(Cr) G(Y) B(PCb)  
HD  
H
VD  
IN  
OUT  
INTER LOCK ETHERNET  
RS232C  
IN  
OUT  
R/G/B/HD/VD  
connectors  
Monitor cable (not supplied)  
to monitor output  
Computer  
Note  
Select “RGB” in “Signal Mode” of “Input Source” in the  
PICTURE CONTROL window.  
For details, see page 26.  
GB 20  
Connecting the Projector  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Projecting  
3
Chapter  
Using the Remote Commander  
Projecting the Picture  
STATUS LAMP indicator  
1
Use the supplied Remote Commander or a computer in  
which the supplied SRX Controller is installed to project  
the picture on the screen.  
1
2
SCREEN  
I
1
MODE  
3
MUTING  
1
2
4
MUTING  
FUNCTION  
1
2
3
INPUT SEL  
5
A
B
C
D
PICTURE CONT  
+
+
+
CONTR  
BRIGHT  
SHARP  
SCREEN SEL  
1
3
2
4
7
9
LENS CONT  
+
+
+
FOCUS  
ZOOM  
SHIFT  
6, 8  
SR Projector  
IR  
RM-PJ4K  
21 GB  
Projecting the Picture  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
Set the main power switch on the left side of the  
projector to the upper position.  
picture in dual-screen mode or the upper left screen in  
quad-screen mode. If you project still pictures only,  
you may project them on any screen.  
The STATUS LAMP indicator lights red and the  
projector goes into standby mode.  
6
7
Adjust the focus with the FOCUS +/– buttons.  
During adjustment, “FOCUS” appears on the screen.  
2
3
Press the ? button to turn on the projector.  
The STATUS LAMP indicator lights green.  
Adjust the picture size with the ZOOM +/– buttons.  
During adjustment, “ZOOM” appears on the screen.  
Select the screen mode.  
8
9
Adjust the focus again with the FOCUS +/– buttons.  
Each time you press the SCREEN MODE button, the  
screen mode switches as follows:  
1 (single-screen mode): Projects an image in full  
screen.  
Adjust the vertical position of the picture with the  
SHIFT +/– buttons.  
2 (dual-screen mode): Projects images in two divided  
screens. You can also project a different input  
source in each of the two screens.  
4 (quad-screen mode): Projects images in four  
divided screens. You can also project a different  
input source in each of the four screens.  
During adjustment, “SHIFT” appears on the screen.  
Note  
The FOCUS, ZOOM and SHIFT indications do not appear  
when you select “OSD OFF” in the Control Function  
Menu window of the computer.  
4
5
Turn on the equipment connected to the projector.  
Press the INPUT SEL button to select the input source.  
To cut off the picture  
Press the MUTING button.  
A: to select the input source from the equipment  
connected to the optional input board attached to  
the INPUT A section.  
B: to select the input source from the equipment  
connected to the optional input board attached to  
the INPUT B section.  
C: to select the input source from the equipment  
connected to the optional input board attached to  
the INPUT C section.  
D: to select the input source from the equipment  
connected to the optional input board attached to  
the INPUT D section.  
To restore the picture, press the MUTING button again.  
To turn off the power  
1
2
Press the 1 button.  
The STATUS LAMP indicator flashes green and the  
fan continues to run for 10 minutes to reduce the  
internal heat. When the fan stops running, the  
STATUS LAMP indicator lights red.  
Set the main power switch to the lower position.  
When you select “dual-screen mode” or  
“quad-screen mode” in step 3  
Note  
Press one of the INPUT SEL A to D buttons to select  
the input source you want to project, then select one of  
the divided screens where you want to project the  
picture with the SCREEN SEL button.  
Do not set the main power switch to the lower position  
while the fan is running. Doing so stops the fan before  
the inside of the projector has been cooled down  
sufficiently and may damage the unit.  
Note  
When projecting moving pictures in multiple screens,  
all the input signals should be genlocked to  
synchronize with each other. A picture on the left  
screen for dual-screen mode or that on the upper left  
screen for quad-screen mode is regarded as a reference  
picture. The projected moving picture not  
synchronized with the reference picture appears  
incompatible with the moving pictures projected on  
other screens. If you project still pictures and moving  
pictures together, select the left screen for the moving  
GB 22  
Projecting the Picture  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2
3
Start your computer and double-click the  
the SRX Controller in the desktop window.  
icon of  
Using the Computer for Controlling  
the Projector  
The Browser Screen of the SRX Controller opens.  
Select the projector you want to operate by double-  
clicking the projector or by pointing at it and clicking  
the Select button.  
STATUS LAMP indicator  
1
The Control Function Menu window opens.  
Note  
When you connect the projectors to the computer via a  
network, you can also select the projector you want to  
operate by specifying the IP address of the projector. If  
connection is made via the RS232C connector on the  
projector, specify the RS-232C port number of the  
computer.  
3
For details, see “Changing the Connection Mode” on  
page 18.  
4
5
Click the POWER ON ? button to turn on the projector.  
The POWER and STATUS LAMP indicators light  
green.  
Click one of the following buttons to select the screen  
mode.  
(single screen mode): Projects images in full  
screen.  
(dual screen mode): Projects images in two  
divided screens. You can also project a different input  
source in each of the two screens.  
5 7  
4
(quad screen mode): Projects images in four  
divided screens. You can also project a different input  
source in each of the four screens.  
6
7
Turn on the equipment connected to the projector.  
Select the input source from the drop-down list box  
displayed by clicking  
.
8
INPUT A: to select the input source from the  
equipment connected to the optional input board  
attached to the INPUT A section.  
9,11 10 12  
INPUT B: to select the input source from the  
equipment connected to the optional input board  
attached to the INPUT B section.  
INPUT C: to select the input source from the  
equipment connected to the optional input board  
attached to the INPUT C section.  
INPUT D: to select the input source from the  
equipment connected to the optional input board  
attached to the INPUT D section.  
1
Set the main power switch on the left side of the  
projector to the upper position.  
The POWER and STATUS LAMP indicators light red  
and the projector goes into standby mode.  
23 GB  
Projecting the Picture  
Download from Www.Somanuals.com. All Manuals Search And Download.  
independently. Click “ON” of the CUT OFF buttons of  
each screen.  
Note  
When you select the input from the connectors on the  
LKRI-001 input board, select the appropriate input  
signal from “Mode” of “Input Source” in the  
PICTURE CONTROL window. Improper setting may  
cause deterioration of the picture.  
To restore the picture, click “OFF” of the CUT OFF  
buttons.  
To cut off the whole screen  
Click the MUTING ON button. The whole screen appears  
in black. To restore the picture, click the MUTING OFF  
button.  
For details, see page 26.  
When you select “dual-screen mode” or  
“quad-screen mode” in step 5  
Select the input source for each screen from the  
corresponding drop-down list box.  
To turn off the power  
1
Click the POWER STANDBY 1 button, then the OK  
button in the displayed confirmation dialog.  
Note  
When projecting moving pictures in multiple screens,  
all the input signals should be genlocked to  
synchronize with each other. A picture on the left  
screen for dual-screen mode or that on the upper left  
screen for quad-screen mode is regarded as a reference  
picture. The projected moving picture not  
synchronized with the reference picture appears  
incompatible with the moving pictures projected on  
other screens. If you project still pictures and moving  
pictures together, select the left screen for the moving  
picture in dual-screen mode or the upper left screen in  
quad-screen mode. If you project still pictures only,  
you may project them on any screen.  
The POWER and STATUS LAMP indicators flash  
green and the fan continues to run for 10 minutes to  
reduce the internal heat. When the fan stops running,  
the POWER and STATUS LAMP indicators light red.  
2
Set the main power switch to the lower position.  
Note  
Do not switch the main power switch to the lower (off)  
position while the fan is running. Doing so stops the  
fan before the inside of the projector has been cooled  
down sufficiently and may damage the unit.  
8
9
Click the “INSTALLATION” button to open the  
INSTALLATION window.  
Adjust the focus with the Focus +/– buttons.  
During adjustment, “FOCUS” appears on the screen.  
10Adjust the picture size with the Zoom +/– buttons.  
During adjustment, “ZOOM” appears on the screen.  
11Adjust the focus again with the Focus +/– buttons.  
12Adjust the vertical position of the picture with the Shift  
+/– buttons.  
During adjustment, “SHIFT” appears on the screen.  
Note  
The FOCUS, ZOOM and SHIFT indications do not appear  
when you select “OSD OFF” in the SCREEN CONTROL  
window.  
To cut off the picture  
Click “ON” of the CUT OFF buttons.  
When you select the dual-screen mode or quad-screen  
mode, you can cut off the picture of each screen  
GB 24  
Projecting the Picture  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjustments and Settings  
Using the SRX Controller  
4
Chapter  
3
Click any of the PICTURE CONTROL, COLOR/  
FRAME and INSTALLATION buttons to display the  
desired control window.  
Displaying the Control  
Function Menu Window  
For details on each setting window, see the relevant  
window pages.  
When you install the supplied SRX Controller in a  
computer, you can operate the picture adjustments, input  
signal settings, installation settings, etc. from the  
computer.  
To go back to the Browser Screen  
Select “Back” on the menu bar.  
To clear the Control Function Menu  
window  
Select “Quit” from the File menu on the menu bar, or click  
Some of the picture adjustments are available using the  
supplied Remote Commander.  
the  
(close) button.  
For details, see “Remote Commander” on page 11.  
To reset the settings that have been  
adjusted  
1
Double-click the  
desktop window of the computer.  
icon of the SRX Controller in the  
Clicking the RESET button in the PICTURE CONTROL  
window resets all the settings of the items for “Signal  
Adjust” to their factory preset values. To reset the settings  
of the items for “Frame Adjust” in the COLOR/FRAME  
window, click the RESET button in the COLOR/FRAME  
window.  
The Browser Screen appears.  
2
Select the projector you want to operate by double-  
clicking the projector or click the Select button.  
The Control Function Menu window opens.  
To register the settings that have been  
adjusted  
You can register the settings that have been adjusted with  
“Signal Adjust” and “Color” in the control windows to  
FUNCTION 1, 2 and 3. As the default setting, the settings  
are registered to FUNCTION 1. To register the settings to  
FUNCTION 2 or 3, click the FUNCTION 2 or 3 radio  
button, then adjust the items in each window.  
You can recall it later to project the picture with the desired  
setting by clicking one of the FUNCTION radio buttons.  
You can also recall it with the FUNCTION 1, 2 or 3 button  
on the Remote Commander.  
25 GB  
Displaying the Control Function Menu Window  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the items that cannot be adjusted  
Items that cannot be adjusted depending on the input signal  
are not displayed in the window.  
PICTURE CONTROL  
Window  
For details, see “Input Signals And Adjustable/Setting  
Items” on page 30.  
The PICTURE CONTROL window is used to select the  
input source or to adjust the picture quality.  
When the screen mode is set to “dual screen” or “quad  
screen,” the items can be independently adjusted for each  
input channel displayed on the screen.  
Input Source  
Signal Mode: Click  
to select the type of signal from  
the drop-down list when a high-definition signal is  
input from equipment connected to the optional  
LKRI-001 input board. Select “YPbPr” to input the  
high-definition signal from component equipment,  
and “RGB” to input the high-definition signal from  
video GBR equipment.  
I/P Mode: Selects the I/P conversion mode. Depending on  
the input signal source, set the mode to “Interlace” or  
“PsF.”  
Signal Info (Information)  
Shows the horizontal and vertical frequencies of the input  
signal automatically. The values are approximate.  
The type of the input signal is also displayed.  
fH: Displays the horizontal frequency.  
fV: Displays the vertical frequency.  
GB 26  
PICTURE CONTROL Window  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Signal Adjust  
COLOR/FRAME Window  
Adjusts the picture quality of the input signal.  
Clicking  
decreases it.  
increases the setting value, and  
The COLOR/FRAME window is used to adjust the input  
signal.  
When the screen mode is set to “dual-screen” or “quad-  
screen,” the items can be independently adjusted for each  
input channel displayed on the screen.  
Clicking the RESET button resets all the settings to the  
factory preset values.  
Contrast: Adjusts the picture contrast. The higher the  
setting, the greater the contrast.  
Brightness: Adjusts the picture brightness. The higher the  
setting, the brighter the picture.  
Color: Adjusts the color intensity. The higher the setting,  
the greater the intensity.  
Sharpness: Adjusts the picture sharpness. The higher the  
setting, the sharper the picture. The lower the setting,  
the softer the picture.  
Color  
Adjusts the items so that you can obtain precise color  
reproduction.  
If the color of an image is not correct, check the setting of  
“Color Space” first.  
Select the setting from the drop-down list displayed by  
clicking  
.
Color Space: Selects the color gamut.  
709: Select when projecting a normal high-definition  
signal or RGB signal.  
DCDM: Select when projecting a special source such  
as a movie.  
CIEXYZ: This item is for future use.  
Color Temp (temperature): Selects the color  
temperature from among “DCI W/P,” “6500,”  
“CUSTOM1,” “CUSTOM2,” “CUSTOM3” and  
“CUSTOM4.” “DCI W/P” is preset in CUSTOM1 to  
4 settings in the factory.  
“6500” is recommended for a normal high-definition  
signal or RGB signal. Set this item to “DCI W/P” to  
project a movie source.  
Gamma: Selects a gamma correction curve from among  
“2.6,” “2.2” and “1.8.”  
The smaller the value, the brighter the image. Select  
the setting depending on the signal source. “2.2” is  
recommended to project a normal high-definition  
signal or RGB signal.  
27 GB  
COLOR/FRAME Window  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Frame Adjust  
INSTALLATION Window  
Adjusts the horizontal size and the position of the picture.  
Clicking  
decreases it.  
increases the setting value, and  
The INSTALLATION window is used to adjust the  
projected picture, change the lamp output, etc.  
Clicking the RESET button resets all the settings of  
“Frame Adjust” to the factory-preset values.  
Dot Phase: Adjusts the phase of the SXRD panels and the  
input signal. Adjusts the value to obtain the clearest  
picture.  
H Size: Adjusts the horizontal size of the picture according  
to the input signal. As the setting value increases, the  
horizontal size of the picture becomes larger.  
H Shift: Adjusts the horizontal position of the picture. As  
the setting value increases, the picture moves to the  
right. As the value decreases, the picture moves to the  
left.  
V Shift: Adjusts the vertical position of the picture. As the  
setting value increases, the picture moves up. As the  
value decreases, the picture moves down.  
LENS CONTROL  
Adjusts the projected picture on the screen.  
Notes  
Zoom +/–: Adjusts the size of the picture. Clicking  
enlarges the picture size, and  
size.  
Focus +/–: Adjusts the picture focus. Clicking  
on a forward picture. Clicking  
picture further back.  
Shift +/–: Adjusts the vertical position of the picture.  
Clicking moves the picture upward. Clicking  
reduces the picture  
• Adjustment of “Dot Phase” and “H Size” is available for  
computer signal input only.  
• If the position of the picture is not adjusted correctly,  
noise may appear in the blank portion of the screen. This  
is not a malfunction of the projector. Adjust the picture  
position correctly with “Frame Adjust.”  
focuses  
focuses on a  
moves it downward.  
PROGRESSIVE DISPLAY MODE  
Normally, click the Off radio button.  
Click the On radio button when four HD images with 2048  
(1920) × 1080 pixels are input from four HD-SDI input  
boards and are combined into a 4096 (3840) × 2160-pixel  
image on the screen in “quad-screen” mode.  
LAMP POWER  
Adjusts the lamp power output. You can reduce the lamp  
power to 93%, 86%, 79%, 72%, 65%, 58% or 51%. The  
brightness of the projected image will be darker, but power  
consumption can be reduced and this increases the lamp  
life. Clicking the 100% radio button allows you to obtain  
the brightest projection image.  
Note  
Switching the lamp output frequently may reduce the lamp  
life. Use of the defined lamp output is recommended.  
GB 28  
INSTALLATION Window  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTALLATION  
Selects how to install the projector.  
Front: Selects front projection.  
Rear: Selects rear projection.  
LAMP SELECT  
Selects whether to use one of two lamps or both lamps.  
Dual: Select if you want to use two lamps.  
Single: Select if you want to use only one of two lamps. In  
this setting, you can further select the lamp to be used  
automatically or manually.  
Auto Lamp Select Mode  
When you click the Full Auto Select radio button, the  
lamp with fewer used hours is automatically turned  
on. When you use the projector for a long period of  
time, click the User-Defined radio button. If you  
specify the hour between 4 and 24 hours by clicking  
the  
/
buttons, the two lamps turn on  
alternately at the interval of the specified hours.  
Manual Lamp Select Mode  
You can specify the lamp to be used by clicking the  
Lamp A or Lamp B radio button.  
Note  
If you switch “LAMP SELECT” from “Single” to “Dual”  
or when either Lamp A or Lamp B switches to turn on in  
Auto Lamp Select Mode, the projected image will be cut  
off momentarily.  
TEST PATTERN  
Displays a built-in test pattern on the screen for adjusting  
the picture with no signal input from external equipment.  
Click the radio button of the desired test pattern from  
among “Cross Hatch,” “Cross Hatch (Invert),” “100%  
White,” “100% Red,” “100% Green,” “100% Blue,”  
“Checker Flag” and “Checker Flag (Invert).” When you do  
not display a built-in test pattern, click the Off radio  
button.  
Note  
While a built-in test pattern is displayed on the screen, you  
cannot change the screen mode and input select mode, and  
cannot adjust the “PICTURE CONTROL” and “COLOR  
FRAME.”  
29 GB  
INSTALLATION Window  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Input Signals And Adjustable/Setting Items  
Some items of “Signal Adjust” in the PICTURE CONTROL window and “Frame Adjust” in the COLOR/FRAME  
window are not adjusted or set depending on the input signals. Items that cannot be adjusted depending on the input signal  
are not displayed in the window.  
Signal Adjust  
Input signal  
Item  
Component  
Video GBR  
Computer  
HD-SDI  
Contrast  
Brightness  
Color  
z
z
z
z
z
z
z
z
z
z
z
z
Sharpness  
z
z
z: Adjustable/can be set  
–: Not adjustable/cannot be set  
Frame Adjust  
Input signal  
Item  
Component  
Video GBR  
Computer  
HD-SDI  
Dot Phase  
H Size  
z
z
z
z
H Shift  
z
z
z
z
z
z
V Shift  
z: Adjustable/can be set  
–: Not adjustable/cannot be set  
GB 30  
Input Signals And Adjustable/Setting Items  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Others  
5
Chapter  
Lamp Life  
Recommended time for replacement of the projection  
lamp is as follows:  
SRX-R110: Approx. 800 hours  
SRX-R105: Approx. 1,000 hours  
The “Lamp A” and “Lamp B” bar indicators in the Control  
Function Menu window become red when the time for  
replacement is coming near. The percentage indicates the  
time used before the recommended time for replacement.  
Use them as a guide.  
Be sure to ask qualified Sony personnel to replace a  
projection lamp and lamp house.  
31 GB  
Lamp Life  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If the projector appears to be operating erratically, try to diagnose and correct the problem using the following guide. If  
the problem still persists, consult with qualified Sony personnel.  
Power  
Symptom  
Cause  
Remedy  
Power is not turned on.  
The main power is turned off.  
Set the power switch on the projector to the upper position (pages  
22 and 23).  
The projector and a computer for  
Connect the projector and a computer properly (page 17).  
controlling the projector are disconnected.  
The cooling unit is detached.  
Consult with qualified Sony personnel after the second time.  
Picture  
Symptom  
Cause  
Remedy  
No picture.  
Cables are disconnected.  
Input selection is not correct.  
Check that the proper connection has been made (page 19).  
Select the input source correctly in the SCREEN CONTROL  
window (page 23).  
The picture is cut off.  
Click the MUTING OFF or CUT OFF ON button in the SCREEN  
CONTROL window (page 24), or press the MUTING button on  
the Remote Commander (page 22).  
Ambient temperature is high.  
Reduce the room temperature so that it becomes within the  
operating temperature (5–35°C).  
Color balance is incorrect. Incorrect input source mode is selected.  
Set “Signal Mode” of “Input Source” in the SCREEN CONTROL  
window correctly (page 26).  
The picture is too dark.  
Contrast and brightness has not been  
adjusted properly.  
Adjust the contrast or brightness in the PICTURE CONTROL  
window (page 27), or adjust them using the CONTR or BRIGHT  
button on the Remote Commander (page 12).  
Lamp mode is not properly selected.  
OSD OFF button has been clicked.  
Set “LAMP POWER” or “LAMP SELECT” in the  
INSTALLATION window correctly. (page 28)  
On-screen display does  
not appear.  
Click the OSD ON button in the SCREEN CONTROL window  
(page 11).  
Remote Commander/SRX Controller  
Symptom  
Cause  
Remedy  
The SRX Controller does The projector and a computer for  
Check that the proper connection between the projector and a  
computer has been made (page 17).  
not start.  
controlling the projector are not properly  
connected.  
The Remote Commander The remote control detector has been  
Consult with qualified Sony personnel.  
Replace with new batteries.  
does not work.  
removed.  
The batteries are dead.  
GB 32  
Troubleshooting  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Error Messages  
The error messages are displayed in the STATUS MESSAGE window on the projector and the Error display window of  
the SRX Controller. If there are two or more messages, a displayed message changes each 5 seconds. Use the list below  
to check the meaning of the error, and consult with qualified Sony personnel. Be sure to inform them of the displayed  
messages and their numbers.  
No.  
1
Error messages  
Meaning  
INPUT-A POWER ALERT  
INPUT-B POWER ALERT  
INPUT-C POWER ALERT  
INPUT-D POWER ALERT  
PR-284_1 POWER ALERT  
PR-284_2 POWER ALERT  
PR-284_3 POWER ALERT  
PR-284_4 POWER ALERT  
24V POWER SUPPLY ALERT  
16V POWER SUPPLY ALERT  
PR-284_1 DETACHED  
Trouble with power of INPUT A board  
2
Trouble with power of INPUT B board  
3
Trouble with power of INPUT C board  
4
Trouble with power of INPUT D board  
5
Trouble with power of PR-284 board at the top  
Trouble with power of PR-284 board on the second row  
Trouble with power of PR-284 board on the third row  
Trouble with power of PR-284 board on the fourth row  
The projector has failed to supply 24V power.  
The projector has failed to supply 16V power.  
The PR-284 board is not attached correctly on the top row.  
The temperature of the panels is too high.  
6
7
8
9
10  
11  
12  
SXRD PANEL TEMPERATURE  
ALERT  
13  
14  
15  
LAMP_A FAN ALERT  
LAMP_B FAN ALERT  
Trouble with the for Lamp A, or the harness is disconnected or down.  
Trouble with the for Lamp B, or the harness is disconnected or down.  
Trouble with the ballast fan for Lamp A power, or the harness is disconnected or down.  
LAMP_A POWER SUPPLY UNIT  
FAN ALERT  
16  
LAMP_B POWER SUPPLY UNIT  
FAN ALERT  
Trouble with the ballast fan for Lamp B power, or the harness is disconnected or down.  
17  
18  
PR-284 FAN ALERT  
Trouble with the fan for PR-284 board, or the harness is disconnected or down.  
The temperature of the optical unit is too high, or the harness is disconnected or down.  
OPTICAL UNIT TEMPERATURE  
ALERT  
19  
20  
21  
22  
LAMP_A TEMPTEMPERATURE  
ALERT  
The temperature of Lamp A is too high, or the harness is disconnected or down.  
The temperature of Lamp B is too high, or the harness is disconnected or down.  
LAMP_B TEMPTEMPERATURE  
ALERT  
LAMP_A HOUSE DETACHED  
LAMP_B HOUSE DETACHED  
REAR COVER DETACHED  
The projection lamp house of Lamp A is not installed correctly, or the harness is  
disconnected or down.  
The projection lamp house of Lamp B is not installed correctly, or the harness is  
disconnected or down.  
23  
24  
The rear cover is open, or the harness is disconnected or down.  
Trouble with the power (ballast) of Lamp A  
LAMP_A POWER SUPPLYUNIT  
ALERT  
25  
LAMP_B POWER SUPPLY UNIT  
ALERT  
Trouble with the power (ballast) of Lamp B  
26  
27  
28  
29  
LAMP_A IGNITION FAILURE  
LAMP_B IGNITION FAILURE  
CPU ALERT  
Lamp A does not turn on.  
Lamp B does not turn on.  
Trouble with the main CPU (IC301) on the SY-321. Serious trouble  
Trouble with opening/shutting of the shutter, or the harness is disconnected or down.  
MUTING OFF FAILURE  
DOUSER OPEN FAILURE  
30  
INPUT BOARD FAN ALERT  
Trouble with the HIF fan next to the INPUT A/B/C/D boards, or the harness is  
disconnected or down.  
33 GB  
Error Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
No.  
31  
Error messages  
Meaning  
REAR FAN ALERT  
Trouble with the huge fan at the rear, or the harness is disconnected or down.  
The RTC battery (BT201) for the SY-321 board should be replaced.  
32  
LOW REAL TIME CLOCK  
BATTERY  
33  
34  
35  
36  
37  
38  
FPGA CONFIG FAILURE  
IIC FAILURE  
An internal line does not function properly.  
An internal line does not function properly.  
LAMP A ALERT  
The recommended time for replacement of Lamp A has elapsed.  
The recommended time for replacement of Lamp B has elapsed.  
80% of the recommended time for replacement of Lamp A has elapsed.  
80% of the recommended time for replacement of Lamp B has elapsed.  
LAMP B ALERT  
LAMP A WARNING  
LAMP B WARNING  
GB 34  
Error Messages  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDTV (YPbPr): BNC type  
Y: 1 Vp-p 2 dB positive, 75 ohms  
terminated  
Specifications  
Tri-level sync: 0.3 Vp-p  
Bi-level sync: 0.3 Vp-p  
Pb/Pr: 0.35 Vp-p 2 dB positive, 75  
ohms terminated  
Optical characteristics  
Projection system  
SXRD (Silicon X-tal Reflective Display)  
HDTV (GBR): BNC type  
G with sync: 1 Vp-p 2 dB, 75 ohms  
terminated  
3 panel prism color integration system  
8,847,360 pixels (4098 × 2160 × 3)  
Optional  
SXRD  
Lens  
Tri-level sync: 0.3 Vp-p  
Bi-level sync: 0.3 Vp-p  
B/R (GBR): 0.7 Vp-p 2 dB positive,  
75 ohms terminated  
1)  
Light output  
SRX-R110: 10,000 ANSI lm 10%  
(factory preset value)  
SRX-R105: 5,000 ANSI lm 10%  
1)  
(factory preset value)  
When the LKRI-002 is installed  
SMPTE format HD  
Lamp  
SRX-R110: 2 kW Xenon lamp × 2  
SRX-R105: 1 kW Xenon lamp × 2  
General  
Dimensions  
1)ANSI lumen is a measuring method of American National Standard IT  
7.228.  
1
3
740 × 500 × 1320 mm (29 /4 × 19 /4 ×  
52 inches) (w/h/d)  
Electrical characteristics  
Acceptable signal  
Mass  
Approx. 110 kg (242 lb 8 oz) (excluding  
the optional lens)  
Component, XGA, SXGA, WXGA, HD  
(when the LKRI-001 analog input  
board is installed)  
HD-SDI (SMPTE Serial Digital Interface  
standard) (when the LKRI-002 HD-  
SDI (4:2:2) input board is installed)  
Power requirements  
SRX-R110: 200 to 240 V AC, 50/60 Hz  
SRX-R105: 100 to 240 V AC, 50/60 Hz  
Power consumption  
SRX-R110: Max. approx. 5.4 kW  
(Standby mode: 40 W)  
SRX-R105: Max. approx. 3.0 kW  
(Standby mode: 40 W)  
Input/Output  
Current consumption  
INTER LOCK Minijack  
SRX-R110: 30 to 22 A  
SRX-R105: 30 to 12.5 A  
Normal operation at short circuit  
Lamp power off at open circuit  
Operating temperature  
RS232C  
D-sub 9-pin (female) (For details, see  
“Pin assignment” on page 36.)  
10BASE-T/100BASE-TX  
5°C to 35°C (41°F to 95°F) (About 20  
minutes of aging is recommended to  
provide better quality picture.)  
ETHERNET  
Performance guarantee temperature  
10°C to 30°C (50°F to 86°F)  
Operating humidity  
35% to 85%  
Storage temperature  
Input signal  
When the LKRI-001 is installed  
Analog RGB/component: BNC type  
R/R-Y: 0.7 Vp-p 2 dB positive, 75  
ohms terminated  
G/G SYNC: 0.7 Vp-p 2 dB positive,  
75 ohms terminated  
–20°C to + 60°C (–4°F to +140°F)  
Storage humidity  
10% to 90%  
G with sync/Y: 1 Vp-p 2 dB sync  
negative, 75 ohms terminated  
B/B-Y: 0.7 Vp-p 2 dB positive, 75  
ohms terminated  
SYNC/HD: Composite sync: 0.6 – 8  
Vp-p, high impedance, sync positive/  
negative  
Supplied accessories  
Remote Commander RM-PJ4K (1)  
Size AA (R6) batteries (2)  
SRX Controller (CD-ROM) (1)  
Ethernet cable (cross cable manufactured  
by Sony: 1-830-803-11) (1)  
Operating Instructions (1)  
Horizontal sync: 0.6 – 8 Vp-p, high  
impedance, sync positive/negative  
VD: Vertical sync: 0.6 – 8 Vp-p, high  
impedance, sync positive/negative  
Installation Manual for Dealers (1)  
Operating Instructions (CD-ROM) (1)  
Quick Reference Guide (1)  
35 GB  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Design and specifications are subject to change without  
notice.  
Preset Signals  
Preset signal  
VIDEO60  
fH (kHz) fV (Hz) Aspect ratio  
Optional accessories  
Projection lamp house  
15.73  
15.63  
33.75  
48.36  
56.48  
60.02  
68.68  
60.00  
59.94  
50.00  
60.00  
60.00  
70.07  
75.03  
85.00  
60.00  
60.01  
75.03  
85.02  
60.00  
4:3  
4:3  
16:9  
4:3  
4:3  
4:3  
4:3  
4:3  
5:4  
5:4  
5:4  
4:3  
VIDEO50  
LKRX-B110 (for SRX-R110)  
LKRX-B105 (for SRX-R105)  
Projection lamp  
LKRX-110 (for SRX-R110)  
LKRX-105 (for SRX-R105)  
Analog input board  
LKRI-001 (analog RGB/component/HD  
input with 5 BNC type)  
HD-SDI (4:2:2) input board  
LKRI-002 (HD-SDI input/output with 2  
BNC type)  
HDTV  
1024 × 768_VESA60  
1024 × 768_VESA70  
1024 × 768_VESA75  
1024 × 768_VESA85  
1280 × 960_VESA60  
1280 × 1024_VESA60 63.97  
1280 × 1024_VESA75 79.98  
1280 × 1024_VESA85 91.15  
Projection lens  
LKRI-Z115 (1.5 to 1.9-times zoom lens)  
LKRI-Z120 (1.9 to 2.3-times zoom lens)  
LKRI-Z125 (2.3 to 4.0-times zoom lens)  
LKRI-Z140 (4.0 to 7.0-times zoom lens)  
1600 ×  
1200_VESA605  
75.00  
720/60P  
45.00  
37.50  
27.00  
28.13  
60.00  
50.00  
48.00  
50.00  
16:9  
16:9  
16:9  
16:9  
720/50P  
Pin assignment  
RS232C connector (D-sub 9-pin, female)  
1080/48I (24PsF)  
1080/50I  
5
4
3
2
1
9
8
7
6
1
2
NC  
RD  
Received Data  
Transmit Data  
3
4
TD  
*
Data Terminal Ready  
DTR  
5
6
GND  
Ground  
*
Data Set Ready  
DSR  
**  
7
8
9
Request to Send  
Clear to send  
RTS  
**  
CTS  
NC  
*
Circuit between pins 4 and 6 is short-circuited in the projector.  
** Circuit between pins 7 and 8 is short-circuited in the projector.  
GB 36  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Displayed image size in multiple screen mode  
Unit: pixel  
Screen  
Full screen  
mode  
Dual screen  
Quad screen  
Horizontal  
size  
Vertical size  
Horizontal  
size  
Vertical size  
Horizontal  
size  
Vertical size  
Type  
of signal  
VIDEO60  
VIDEO50  
XGA  
2880  
2880  
2849  
2560  
2864  
3810  
3840  
4096  
2156  
2146  
2137  
2048  
2148  
2143  
2160  
2160  
2003  
2003  
2048  
2048  
1600  
2048  
1920  
1499  
1504  
1536  
1638  
1200  
1152  
1080  
1440  
1440  
1432  
1280  
1078  
1073  
1074  
1024  
SXGA  
UXGA*  
720p  
1280  
1920  
720  
1080  
HD  
4K  
* The UXGA signal does not support the quad-screen mode and no picture is displayed.  
37 GB  
Specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F
R
Index  
Focus 22, 28  
Registering the settings 25  
Remote Commander  
Battery installation 12  
LocationandFunctionofControls  
11  
Frame Adjust 28  
FUNCTION 1/2/3 25  
A
G
Adjusters 14  
Adjusting  
Resetting the settings 25  
RS-232C 17  
Gamma 27  
focus 28  
lens shift 28  
picture 12, 27  
zoom 28  
H
S
H Shift 28  
H Size 28  
SCREEN CONTROL window 10  
Screen mode 22, 23  
Shift 22, 28  
Signal Adjust 27  
Signal Info 26  
Signal Mode 26  
Specifications 35  
SRX Controller  
B
I
Battery  
installation 12  
notes 12  
I/P Mode 26  
Input Source 26  
INSTALLATION 29  
INSTALLATION window 28  
Installing the projector 15  
C
Browser Screen 18  
installing 15  
starting 18  
Carrying handles 14  
CD-ROM manual 6  
Color 27  
L
STATUS MESSAGE window 33  
Supplied accessories 35  
Lamp Life 31  
Color Space 27  
LAMP POWER 28  
Color Temp 27  
LAMP SELECT 29  
LENS CONTROL 28  
Location and Function of Controls  
Control Function Menu window 9  
Front/Top 8  
COLOR/FRAME window 27  
Connection mode 18  
Connections  
T
TEST PATTERN 29  
Troubleshooting 32  
component/videoGBRequipment  
19  
Left Side/Rear 9  
Remote Commander 11  
V
computer 20  
computer for controlling the  
projector 17  
V Shift 28  
HD-SDI equipment 19  
Control Function Menu window  
Displaying 25  
O
Z
Optional accessories 36  
Zoom 22, 28  
Location and function of controls  
9
Cut off the picture 22, 24  
P
PICTURE CONTROL window 26  
Precautions 5  
Precautions on installation 13  
PROGRESSIVE DISPLAY MODE  
28  
D
Dot Phase 28  
Projecting  
E
Using the computer for controlling  
the projector 23  
Error messages 33  
Using the Remote Commander 21  
ETHERNET connector 17  
Printed on 100% recycled paper.  
Printed in Japan  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL 1197PIII User Manual
Sharp Cooktop KB 3411JK User Manual
Singer Sewing Machine 127 3 128 3 User Manual
Sony Car Stereo System NSZ GS7 NSZ GX70 User Manual
Sony Home Theater System BDV E770W User Manual
Sony Personal Computer PCV 9913 User Manual
Suncast Outdoor Storage BMS7700 User Manual
Sylvania MP3 Docking Station SIP297 User Manual
Symbol Technologies Water Dispenser MC9000 K User Manual
TANDBERG Computer Monitor 6000 MXP User Manual