Sony Projector KP 43T70 User Manual

3-866-565-13(1)  
Color Rear Video Projector  
Operating Instructions  
KP-43T70  
KP-46C70  
KP-48S70  
KP-48S72  
KP-53S70  
KP-53N74  
KP-61S70  
© 1999 by Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in  
accordance w ith the instructions, may cause harmful  
interference w ith radio communications. How ever,  
there is no guarantee that interference w ill not occur  
in a particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, w hich can be determined by turning the  
equipment off and on, the user is encouraged to try to  
correct the interference by one or more of the  
follow ing measures:  
CAUTION  
WARNING  
When using TV games, computers and similar products  
w ith your projection TV, or view ing a TV station w hose  
logo alw ays stays on the screen, keep the brightness  
and contrast functions at low settings. If a fixed (non-  
moving) pattern such as a station logo is left on the  
screen for long periods of time, especially at a high  
brightness or contrast setting, the image can be  
permanently imprinted onto the screen. These types of  
imprints are not covered by your w arranty because  
they are the result of misuse.  
To prevent fire or shock  
hazard, do not expose the TV  
to rain or moisture.  
CAUTION  
RISK OF ELECTRIC SHOCK  
DO NOT OPEN  
Reorient or relocate the receiving antennas.  
No t e o n Ca p t io n Visio n  
Increase the separation betw een the equipment and  
receiver.  
ATTENTION  
This television receiver provides display of television  
closed captioning in accordance w ith §15.119 of the  
FCC rules.  
RISQUE DE CHOC ELECTRIQUE,  
NE PAS OUVRIR  
Connect the equipment into an outlet on a circuit  
different from that to w hich the receiver is  
connected.  
PRECAUCION  
No t e o n co n ve rg e n ce a d ju st m e n t  
Before you use your projection TV, make sure to adjust  
convergence. For details, see page 15.  
Consult the dealer or an experienced radio/TV  
technician for help.  
RIESGO DE CHOQUE ELECTRICO  
NO ADRIR  
NO ABRIR  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,  
No t e t o CATV syst e m in st a lle r  
(
)
DO NOT REMOVE COVER OR BACK .  
This reminder is provided to call the CATV system  
installers attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in  
particular, specifies that the cable ground shall be  
connected to the grounding system of the building, as  
close to the point of cable entry as practical.  
NO USER-SERVICEABLE PARTS INSIDE.  
This document is for the remote control RM-Y906  
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.  
MODELS: KP-43T70, KP-46C70, KP-48S70, KP-48S72,  
KP-53S70, KP-53N74, KP-61S70  
This symbol is intended to alert the user to  
the presence of uninsulated “dangerous  
voltage” w ithin the products enclosure that  
may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
Please keep this notice w ith the instruction manual.  
Use of this television receiver for other than private  
view ing of programs broadcast on UHF or VHF or  
transmitted by cable companies for the use of the  
general public may require authorization from the  
broadcaster/cable company and/or program ow ner.  
As an ENERGY STAR Partner,  
Sony Corporation has  
determined that this product  
meets the ENERGY STAR  
This symbol is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
guidelines for energy efficiency.  
NOTIFICATION  
This equipment has been tested and found to comply  
w ith the limits for a Class B digital device pursuant to  
Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful  
interference in a residential installation. This  
ATTENTION  
CAUTION  
Pour prévenir les chocs électriques, ne pas utiliser cette  
fiche polarisée avec un prolongateur, une prise de  
courant ou une autre sortie de courant, sauf si les  
lames peuvent être inserées à fond sans en laisser  
aucune partie à decouvert.  
To prevent electric shock, do not use this polarized AC  
plug w ith an extension cord, receptacle or other  
outlet unless the blades can be fully inserted to  
prevent blade exposure.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
Ge t t in g t o kn o w t h e b u t t o n s o n t h e  
re m o t e co n t ro l  
POWER  
(pages 16, 44, 45)  
MUTING  
In the instructions that follow, we will  
refer to the buttons on your remote control.  
Keep this flap unfolded and use this page  
for reference.  
(page 16)  
FUNCTION  
(pages 16, 44, 45)  
MUTING  
DVD/  
VTR  
SAT/  
POWER  
TV  
Names of the buttons on the remote control are  
presented in different colors to represent the  
available functions.  
CABLE  
SYSTEM OFF  
(page 18)  
FUNCTION  
PIP operation  
buttons  
SYSTEM  
OFF  
DVD/VTR SAT/CABLE  
TV  
VCR/DVD/MDP  
operation buttons  
(page 44)  
TV/VTR  
FREEZE  
SWAP  
PIP  
(page 19)  
Button color  
m
N
M
POSITION AUDIO ACTIVE  
TV/VIDEO  
(pages 17, 19)  
Transparent .... Press to select the component  
you want to control; e.g. VTR  
(VCR)/ MDP/ DVD Player,  
SAT (satellite receiver)/  
CABLE, or projection TV.  
Green ............... Buttons relevant to power  
operations, like turning the  
projection TV, SAT/ CABLE, or  
VTR (VCR)/ MDP/ DVD Player  
on or off  
X
z
x
SLEEP  
ANT  
TV/VIDEO  
SLEEP (page 18)  
PICTURE MODE (pages 16, 22)  
CC (page 18)  
PICTURE  
MODE  
CC  
MTS/SAP DISPLAY  
ANT (page 20)  
DISPLAY  
1
2
3
6
(page 17)  
5
8
0
4
0 – 9 buttons  
MTS/SAP  
(pages 18, 23)  
7
9
(page 16)  
JUMP  
ENTER  
JUMP (page 17)  
ENTER (page 16)  
INDEX  
GUIDE  
(pages 18, 23)/  
INDEX (for SAT, page 45)  
GUIDE (page 45)  
V/v/B/b and  
RESET  
MENU  
Label color  
White ............... TV/ VTR (VCR)/ MDP/ DVD  
Player/ SAT (satellite  
receiver)/ CABLE operation  
buttons  
Yellow .............. PIP operation buttons  
Blue .................. SAT operation buttons  
Green ............... S-Link operation buttons  
Pink .................. DVD Player operation buttons  
buttons  
RESET  
VOL  
CH  
(page 21)  
(pages 19, 22, 23)  
MENU (page 21)  
CH +/– (page 16)  
VOL +/– (page 16)  
CODE SET  
CODE SET  
(pages 43, 45)  
TV  
For a detailed explanation of most buttons, see  
“Watching the TVon page 16.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Connecting a DTV (digital television)  
receiver ............................................... 9  
Connecting a camcorder ....................... 9  
Connecting two VCRs for tape  
editing ............................................... 10  
Connecting a DVD Player .................. 11  
Connecting a DVD Player with  
Adjusting Your SET UP (menus)... 21  
Learning Menu Selection .......................... 21  
Using the Video Menu ......................... 22  
Using the Audio Menu ........................ 23  
Using the Timer Menu ........................ 25  
Welcome! ........................................ 1  
Using This Manual .......................... 1  
Precautions ...................................... 2  
Installing and Connecting the  
Projection TV....................... 3  
ch  
Using the Channel Set Up Menu ...... 26  
component video output  
Setting and Selecting Favorite Channel.. 28  
Using the Set Up Menu ...................... 30  
Using the Parental Control Feature ......... 32  
connectors ........................................ 11  
Connecting an audio system ............. 12  
Connecting a Sony SAVA series  
Carrying Your Projection TV ...................... 3  
Installing the Projection TV ........................ 3  
Connector Types .......................................... 4  
Making Connections ................................... 4  
speaker system ................................ 13  
Activating the Parental Control  
Feature .............................................. 32  
Selecting a Custom Rating  
in U.S.A............................................. 34  
Selecting a Custom Rating  
Basic Set Up ................................... 14  
Connecting directly to a cable or an  
antenna ............................................... 4  
Cable or antenna .................................... 5  
Cable and antenna ................................. 5  
Connecting a cable box ......................... 5  
Cable box and cable .............................. 5  
Connecting a cable TV system/  
Using the Remote Control ........................ 14  
Setting Up the Projection TV  
Automatically ................................... 14  
in Canada ......................................... 37  
Changing the Password ..................... 38  
What the Ratings Mean ............................ 39  
Adjusting the Convergence Automatically  
(FLASH FOCUS) .............................. 15  
Ratings in U.S.A................................... 39  
Ratings in Canada ............................... 41  
antenna to a VCR .............................. 6  
Connecting a VCR and projection TV  
to a cable box ..................................... 6  
Connecting a satellite receiver (SAT) .. 7  
Connecting a satellite receiver (SAT)  
and a VCR .......................................... 8  
Using Your New Projection TV .... 16  
Watching the TV ........................................ 16  
Watching Two Programs at One Time  
— PIP ................................................. 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using This Manual  
Welcome!  
We recommend that you carefully review  
the contents of the following four sections in  
the order provided to ensure that you fully  
understand the operation of your new  
projection TV.  
Thank you for purchasing the Sony Color  
Rear Video Projection TV.  
Operating Video Equipment ........... 43  
Setting the Manufacturer's Code ................ 43  
This manual is for models KP-43T70, KP-  
46C70, KP-48S70, KP-48S72, KP-53S70, KP-  
53N74 and KP-61S70.  
Operating a Cable Box or Satellite  
Receiver (SAT) ...................... 45  
1 Installing and Connecting the Projection  
TV  
Model KP-53S70 is used for illustration  
purposes.  
Setting the Manufacturer's Code ................ 45  
This section guides you through your  
initial set up. It shows you how to install  
your projection TV, to connect your new  
components and to connect to the  
antenna and cable.  
The features you will enjoy include:  
Troubleshooting .............................. 46  
Specifications ................................... 48  
Index .............................................. 49  
FLASH FOCUS, allowing you to adjust  
convergence automatically.  
2 Basic Set Up  
This section teaches you the basic skills  
needed to operate your new projection  
TV, including Auto Set Up. It shows you  
how to operate the remote controls  
special functions.  
Parental Control, enabling you to block  
programs that you feel are unsuitable for  
your children.  
Picture-in-Picture (PIP), allowing you to  
view another TV channel, video or cable  
image as a window picture.  
3 Using Your New Projection TV  
This section shows you how to begin  
using your new projection TV. It shows  
you how to use your remote controls  
features.  
Favorite Channel, allowing you to  
view and choose from eight of your  
favorite channels  
Ow ners Record  
The model and serial numbers are located at the rear of  
the projection TV, below the Sony logo, on the sticker,  
and also on the TV box (w hite label). Record these  
numbers in the spaces provided below . Refer to them  
w henever you call upon your Sony dealer regarding this  
product.  
4 Adjusting Your Set Up (menus)  
This section teaches you how to access  
on-screen menus and adjust your  
projection TV’s settings.  
Y/ PB/ PR inputs for DVD Player and DTV  
receiver connections.  
Three AUDIO/ VIDEO/ S VIDEO inputs.  
Instructions in this manual are written for the remote  
control. Similar controls may be found on the projection  
TV console.  
Model No.  
Serial No.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions  
Sa fe t y  
In st a llin g  
No t e o n cle a n in g  
Operate the projection TV only on 120 V  
AC.  
To prevent internal heat buildup, do not  
block the ventilation openings.  
Clean the cabinet of the projection TV with a  
dry soft cloth. To remove dust from the  
screen, wipe it gently with a soft cloth.  
Stubborn stains may be removed with a cloth  
slightly dampened with solution of mild  
soap and warm water. Never use strong  
solvents such as thinner or benzine for  
cleaning.  
The plug is designed, for safety purposes,  
to fit into the wall outlet only one way. If  
you are unable to insert the plug fully  
into the outlet, contact your dealer.  
Do not install the projection TV in a hot  
or humid place, or in a place subject to  
excessive dust or mechanical vibration.  
Avoid operating the projection TV at  
temperatures below 5° C (41° F).  
If any liquid or solid object should fall  
inside the cabinet, unplug the projection  
TV immediately and have it checked by  
qualified service personnel before  
operating it further.  
If the projection TV is transported  
directly from a cold to a warm location,  
or if the room temperature changes  
suddenly, the picture may be blurred or  
show poor color. In this case, please wait  
a few hours to let the moisture evaporate  
before turning on the projection TV.  
If the picture becomes dark after using the  
projection TV for a long period of time, it  
may be necessary to clean the inside of the  
projection TV. Consult qualified service  
personnel.  
If you will not be using the projection TV  
for several days, disconnect the power by  
pulling the plug itself. Never pull on the  
cord.  
To obtain the best picture, do not expose  
the screen to direct illumination or direct  
sunlight. It is recommended to use spot  
lighting directed down from the ceiling  
or to cover the windows that face the  
screen with opaque drapery. It is  
For details concerning safety precautions, see the  
supplied leaflet “IMPORTANT SAFEGUARDS.”  
desirable to install the projection TV in a  
room where the floor and walls are not of  
a reflective material.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Projection TV  
Re co m m e n d e d vie w in g a re a  
(Ve rt ica l)  
Ca rryin g Yo u r Pro je ct io n TV  
In st a llin g t h e Pro je ct io n TV  
Carrying the projection TV requires three or  
more people.  
Re co m m e n d e d vie w in g a re a  
(Ho rizo n t a l)  
min. 2.4m (approx. 8 ft.)  
min. 2.1m (app. 7 ft.)  
min. 1.8m (approx. 6 ft.)  
Fo r KP-46C70/48S70/48S72/53S70/  
53N74/61S70  
61"  
min. 1.5m (approx. 5 ft.)  
46", 48"  
53"  
The projection TV has been equipped with  
casters for easy movement on a hard surface.  
Please move your projection TV using the  
casters.  
43"  
60°  
60°  
20°  
20°  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Projection TV (continued)  
CONTROL S ca b le  
Ma kin g Co n n e ct io n s  
Co n n e ct o r Typ e s  
Sony cable for CONTROL S connection. This  
feature is exclusive to Sony products and  
allow greater control of all Sony equipment.  
You may find it necessary to use some of the  
following connector types during set up.  
Co n n e ct in g d ire ct ly t o a ca b le o r  
a n a n t e n n a  
Co a xia l ca b le  
Standard TV cable and antenna cable  
The connection you choose will depend on  
the cable found in your home. Newer homes  
will be equipped with standard coaxial cable  
(see A); older homes will probably have 300-  
ohm twin lead cable (see B); still other  
homes may contain both (see C).  
Push into connection.  
Plug Type  
Ab o u t t h e CONTROL S OUT ja ck  
Push into connection.  
Screw-on Type  
To control other Sony equipment with the  
projection TV’s remote control, connect the  
CONTROL S IN jack of the equipment to the  
CONTROL S OUT jack on the projection TV  
with the CONTROL S cable.  
Screw into connection.  
Use 75-ohm coaxial cable for improved  
picture quality (see A).  
S Vid e o ca b le  
High quality video cable for enhanced  
picture quality  
(Rear of  
projection TV)  
VHF/UHF  
A
75-ohm  
coaxial cable  
(Rear of projection TV)  
• VHF only  
Align guides and  
push into connection.  
or  
AUX  
• VHF/UHF  
or  
• Cable  
TO  
CONVERTER  
Au d io /Vid e o ca b le  
IN  
VIDEO 1  
VIDEO 3  
Push into connection.  
VHF/UHF  
OUT  
(Rear of  
projection TV)  
VHF/UHF  
B
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
CONTROL S  
OUT  
Video - Yellow  
Audio (Left) - White  
Audio (Right) - Red  
Y
VIDEO  
300-ohm tw in  
lead cable  
• VHF only  
or  
L
L
PB  
(MONO)  
(MONO)  
AUDIO  
R
AUDIO  
R
CONTROL  
OUT  
S
PR  
• UHF only  
or  
COMPONENT  
Some DVD Players and DTV Receivers are  
equipped with the following three video  
connectors.  
• VHF/UHF  
Antenna connector  
Y - Green  
PB (CB, Cb or B–Y) - Blue  
PR (CR, Cr or R–Y) - Red  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
(Rear of projection TV)  
AUX  
C
Ca b le b o x a n d ca b le  
75-ohm coaxial cable  
Coaxial cable  
(Rear of  
projection TV)  
VHF/UHF  
Some pay cable TV systems use scrambled or  
encoded signals requiring a cable box* only for  
certain channels (e.g. HBO, SHOWTIME, etc.)  
• VHF  
and  
TO CONVERTER  
(No connection “TO  
CONVERTER” in this case)  
VHF/UHF  
*Cable box  
Antenna cable  
(Rear of projection TV)  
EAC-66 U/V mixer  
(not supplied)  
AUX  
• UHF  
Select Cable or ANT mode by pressing ANT  
on the remote control.  
Scrambled  
300-ohm tw in lead cable  
TO CONVERTER  
channels  
Ca b le o r a n t e n n a  
Co n n e ct in g a ca b le b o x  
75-ohm coaxial cable  
(not supplied)  
(Signal)  
VHF/UHF  
This is the simplest connection. Connection is  
made directly from the cable or antenna to  
the projection TV.  
Some pay cable TV systems use scrambled or  
encoded signals that require a cable box* to  
view all channels.  
CATV cable  
(unscrambled channels)  
(Rear of projection TV)  
Also, set “Cable” to “On” in the Channel Set  
Up menu (page 27).  
VHF/UHF  
Coaxial cable  
For this set up, you can switch between  
scrambled channels (through your cable  
box), and normal (CATV) channels by  
pressing ANT on your remote control.  
(Rear of projection TV)  
VHF/UHF  
Coaxial cable  
Ca b le a n d a n t e n n a  
You may find it convenient to use the  
following set up if your cable provider does  
not feature local channels that you are able to  
receive using an antenna.  
No t e s:  
You may be able to program your Sony  
remote control to operate your cable box.  
(see “Operating a Cable Box or Satellite  
Receiver (SAT)” on page 45)  
IN  
OUT  
*Cable box  
During PIP or Favorite Channel viewing,  
the AUX input can only be viewed in the  
main picture.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Projection TV (continued)  
Disconnect all pow er sources before making any connections.  
(Rear of projection TV)  
Co n n e ct in g a ca b le TV syst e m /  
a n t e n n a t o a VCR  
AUX  
1 Attach the coaxial cable from the  
incoming cable connection or antenna to  
VHF/ UHF IN on the VCR.  
TO  
CONVERTER  
Coaxial cable  
IN  
VIDEO 1  
VIDEO 3  
VHF/UHF  
2
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
2 Using a coaxial cable, connect VHF/ UHF  
OUT on the VCR to VHF/ UHF on the  
projection TV.  
S VIDEO  
VCR  
AUDIO  
R
AUDIO  
L
VIDEO  
Y
VIDEO  
LINE  
IN  
VHF/UHF  
OUT  
L
L
P
B
R
(MONO)  
(MONO)  
AUDIO  
R
AUDIO  
R
LINE  
OUT  
IN  
P
Cable/  
Antenna  
3 Using AUDIO and S VIDEO* cables,  
connect AUDIO and S VIDEO OUT on the  
VCR to AUDIO and S VIDEO IN on the  
projection TV (White-AUDIO Left, Red-  
AUDIO Right**).  
COMPONENT  
1
VIDEO  
VMC-810S/820S  
(not supplied)  
S VIDEO  
AUDIO-L  
AUDIO-R  
YC-15V/30V  
(not supplied)  
3
(Rear of projection TV)  
Co n n e ct in g a VCR a n d p ro je ct io n  
TV t o a ca b le b o x  
Coaxial cable  
AUX  
1
1 Connect the single (input) jack of the  
splitter to the incoming cable connection,  
and connect the other two (output) jacks  
(using the coaxial cable) to IN on the cable  
box and VHF/ UHF on the projection TV.  
Cable/  
Antenna  
TO  
CONVERTER  
IN  
Splitter (not supplied)  
VIDEO 1  
VIDEO 3  
VHF/UHF  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
S
VIDEO  
AUDIO  
R
AUDIO  
L
VIDEO  
VCR  
LINE  
IN  
Y
VIDEO  
VHF/UHF  
OUT  
L
2 Using a coaxial cable, connect OUT on the  
2
L
P
B
R
(MONO)  
(MONO)  
LINE  
OUT  
IN  
AUDIO  
R
AUDIO  
R
cable box to VHF/ UHF IN on the VCR.  
P
COMPONENT  
3 Using AUDIO and S VIDEO* cables,  
connect AUDIO and S VIDEO OUT on the  
VCR to AUDIO and S VIDEO IN on the  
projection TV (White-AUDIO Left, Red-  
OUT  
IN  
VIDEO  
AUDIO-L  
AUDIO-R  
VMC-810S/820S  
(not supplied)  
S VIDEO  
Cable box  
YC-15V/30V  
(not supplied)  
3
AUDIO Right**).  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnect all pow er sources before making any connections.  
No t e :  
To view scrambled channels through the  
cable box, select the video input which the  
cable box is connected to by pressing TV/  
VIDEO.  
* If your VCR is not equipped with S VIDEO, use a  
VIDEO cable (yellow) instead of the S VIDEO  
cable.  
** If you are connecting a monaural VCR, connect  
only the single audio output to the left (MONO)  
input on the projection TV.  
(Rear of projection TV)  
Co n n e ct in g a sa t e llit e re ce ive r  
(SAT)  
Cable/  
Antenna  
Satellite antenna  
cable  
AUX  
1 Connect the cable from the satellite  
TO  
CONVERTER  
2
1
antenna to the satellite receiver.  
IN  
VIDEO 3  
VIDEO 1  
2 Attach the coaxial cable from the incoming  
cable connection or antenna to VHF/ UHF  
on the projection TV.  
VHF/UHF  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
SAT  
Y
VIDEO  
SATELLITE IN  
LINE OUT  
VHF/UHF  
AUDIO  
R
AUDIO  
L
VIDEO  
L
S
VIDEO IN  
L
P
B
R
(MONO)  
(MONO)  
OUT  
AUDIO  
R
AUDIO  
R
3 Using AUDIO and S VIDEO cables,  
connect AUDIO and S VIDEO OUT on the  
satellite receiver to AUDIO and S VIDEO  
IN on the projection TV (White-AUDIO  
Left, Red-AUDIO Right).  
P
COMPONENT  
S VIDEO  
AUDIO-L  
AUDIO-R  
RK-74A (not supplied)  
3
No t e :  
To view input from the satellite receiver,  
select the video input which the satellite  
receiver is connected to by pressing TV/  
VIDEO on the remote control.  
YC-15V/30V (not supplied)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Projection TV (continued)  
Disconnect all pow er sources before making any connections.  
Co n n e ct in g a sa t e llit e re ce ive r  
(SAT) a n d a VCR  
1 Connect the cable from the satellite  
(Rear of projection TV)  
antenna to the satellite receiver.  
Coaxial cable  
3
AUX  
2 Attach the coaxial cable from the  
incoming cable connection or antenna to  
VHF/ UHF IN on the VCR.  
SAT  
TO  
SATELLITE IN  
CONVERTER  
VHF/UHF  
AUDIO  
R
AUDIO  
L
VIDEO  
S
VIDEO  
OUT  
IN  
IN  
VIDEO 3  
LINE  
OUT  
VIDEO 1  
VHF/UHF  
3 Using a coaxial cable, connect VHF/ UHF  
OUT on the VCR to VHF/ UHF on the  
projection TV.  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
1
Y
VIDEO  
L
L
Satellite  
antenna  
cable  
VMC-810S/  
820S (not  
supplied)  
PB  
(MONO)  
(MONO)  
AUDIO  
R
AUDIO  
R
4 Using AUDIO and S VIDEO* cables,  
connect AUDIO and S VIDEO OUT on the  
satellite receiver to AUDIO and S VIDEO  
IN on the VCR.  
PR  
YC-15V/  
30V  
(not  
supplied)  
COMPONENT  
4
VIDEO  
AUDIO-L  
AUDIO-R  
S VIDEO  
5 Using AUDIO and S VIDEO* cables,  
connect AUDIO and S VIDEO OUT on the  
VCR to AUDIO and S VIDEO IN on the  
projection TV (White-AUDIO Left, Red-  
AUDIO Right).  
S VDEO  
AUDO  
R
AUDO  
L
VIDEO  
LINE  
IN  
VHF/UHF  
OUT  
LINE  
OUT  
IN  
VCR  
5
2
VMC-810S/820S (not supplied)  
* If your VCR is not equipped with S VIDEO, use a  
VIDEO cable (yellow) instead of the S VIDEO  
cable.  
Cable/  
Antenna  
No t e :  
YC-15V/30V (not supplied)  
To view input from the satellite receiver or  
VCR, select the video input which your  
satellite receiver or VCR is connected to  
by pressing TV/ VIDEO on the remote  
control.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnect all pow er sources before making any connections.  
Co n n e ct in g a DTV (d ig it a l t e le visio n ) re ce ive r  
2
Before connecting, be sure to read the  
Operating Instructions of the DTV receiver.  
VMC-10HG (not supplied)  
AUX  
1 Attach the coaxial cable from the roof  
antenna to VHF/ UHF on the DTV  
receiver.  
Y
TO  
PB  
PR  
CONVERTER  
DTV receiver  
IN  
2 Using three yellow VIDEO cables,  
VIDEO 1  
VIDEO 3  
VHF/UHF  
S
VIDEO  
VIDEO  
OUT  
connect Y, PB and PR of VIDEO OUT on  
the DTV receiver to Y, PB and PR of  
VIDEO 3 IN on the projection TV.  
S
VIDEO  
VIDEO  
MONTOR AUDIO  
(VR/FIX)  
VHF/UHF  
(DTV)  
Y
VIDEO  
1
1
2
2
Y
R
G
DOLBY DIGITAL  
AUDIO OUT  
(OPTICAL)  
L
IN  
L
L
(MONO)  
P
B
(MONO)  
(MONO)  
PB  
HD  
VD  
DOWN  
3 Using an AUDIO cable, connect AUDIO  
OUT on the DTV receiver to AUDIO of  
VIDEO 3 IN on the projection TV (White-  
AUDIO Left, Red-AUDIO Right).  
AUDIO  
R
AUDIO  
R
CONVERTER  
ON/OFF  
R
OUT  
PR  
PR  
B
3
4
CONTROL S  
AUDIO OUT  
VIDEO OUT  
COMPONENT  
(Rear of projection TV)  
AUDIO-R  
4
AUDIO-L  
1
4 Set the DOWN CONVERTER ON/ OFF  
switch on the DTV receiver to ON.  
RK-74A (not supplied)  
Roof antenna  
3
Co n n e ct in g a ca m co rd e r  
Use this connection to view a picture directly  
from your camcorder.  
YC-15V/30V (not supplied)  
1 Using AUDIO and S VIDEO* cables,  
connect AUDIO and S VIDEO OUT on  
the camcorder to AUDIO and S VIDEO  
IN inside the drop-down panel on the  
front of the projection TV (White-AUDIO  
Left, Red-AUDIO Right**).  
Audio/  
video  
outputs  
VMC-810S/820S  
(not supplied)  
S VIDEO  
OUT  
VIDEO  
2 Press VIDEO 2 to select the video inputs  
S VIDEO  
AUDIO-L  
AUDIO-R  
from a camcorder.  
* If your camcorder is not equipped with S  
VIDEO, use a VIDEO cable (yellow) instead of  
the S VIDEO cable.  
AUDIO  
R
VIDEO  
L
S
VIDEO  
(MONO)  
VIDEO 2 INPUT  
** If you are connecting a monaural camcorder,  
connect only the single audio output to the left  
(MONO) input on the projection TV.  
(Front of projection TV)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Camcorder  
9
Installing and Connecting the Projection TV (continued)  
Disconnect all pow er sources before making any connections.  
Co n n e ct in g t w o VCRs fo r t a p e  
e d it in g  
(Rear of projection TV)  
By connecting a second VCR to MONITOR  
OUT, you can record a program being played  
by the primary VCR to the second VCR or  
perform tape editing and dubbing.  
AUX  
TO  
CONVERTER  
IN  
1 Connect the VCR intended for playback  
using the connection instructions on page  
6 of this manual.  
VIDEO 1  
VIDEO 3  
VHF/UHF  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
Y
VIDEO  
VCR (for playback)  
VCR (for recording)  
L
L
P
R
(MONO)  
(MONO)  
2 Using an AUDIO/ VIDEO cable, connect  
AUDIO and VIDEO IN on the VCR  
intended for recording to AUDIO and  
VIDEO OUT of MONITOR OUT on the  
projection TV.  
AUDIO  
R
AUDIO  
R
AUDIO  
R
AUDIO  
L
VIDEO  
OUT  
AUDIO  
R
AUDIO  
L
VIDEO  
OUT  
P
LINE  
OUT  
LINE  
IN  
IN  
IN  
COMPONNT  
VIDEO  
AUDIO-L  
AUDIO-R  
VIDEO  
AUDIO-L  
AUDIO-R  
2
1
VMC-810S/820S  
(not supplied)  
VMC-810S/820S  
(not supplied)  
No t e s:  
Do not change the input signal while  
editing through MONITOR OUT.  
(Rear of projectionTV)  
When connecting a single VCR to the  
projection TV: if VCR LINE OUT is  
connected to VIDEO IN on the projection  
TV, do not connect MONITOR OUT on  
the projection TV to the VCR LINE  
INPUT (see right). Doing so will cause  
program interference and other viewing  
problems.  
VIDEO IN  
MONITOR  
OUT  
Indicates direction  
of signal  
VCR  
LINE  
IN  
OUT  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnect all pow er sources before making any connections.  
(Rear of projection TV)  
Co n n e ct in g a DVD Pla ye r (Up p e r  
illu st ra t io n )  
AUX  
Using an AUDIO and S VIDEO cables,  
connect AUDIO and S VIDEO IN on the  
projection TV to AUDIO and S VIDEO OUT  
on the DVD Player (White-AUDIO Left, Red-  
AUDIO Right).  
TO  
CONVERTER  
DVD  
S VIDEO  
IN  
VIDEO 3  
LINE OUT  
S
VIDEO OUT  
S-LINK  
DIGITAL OUT  
OPTICAL COAXIAL  
VIDEO 1  
R–AUDIO 1–L VIDEO  
VHF/UHF  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
Y
VIDEO  
Co n n e ct in g a DVD Pla ye r w it h  
co m p o n e n t vid e o o u t p u t  
co n n e ct o rs (Lo w e r illu st ra t io n )  
1 Using an AUDIO cable, connect AUDIO of  
LINE OUT on the DVD Player to AUDIO of  
VIDEO 3 IN on the projection TV (White-  
AUDIO Left, Red-AUDIO Right).  
L
L
P
B
(MONO)  
Audio/S video  
outputs  
(MONO)  
AUDIO  
R
AUDIO  
R
P
R
AUDIO-R  
AUDIO-L  
COMPONENT  
Connect the DVD Player  
directly to the projection TV.  
Connecting the DVD Player  
through other video  
equipment w ill cause  
unw anted picture noise.  
RK-74A (not supplied)  
YC-15V/30V (not supplied)  
2 Using three yellow VIDEO cables, connect  
Y, PB, and PR of COMPONENT VIDEO  
OUT on the DVD Player to Y, PB, and PR of  
VIDEO 3 IN on the projection TV.  
(Rear of  
projection  
TV)  
RK-74A (not supplied)  
AUX  
AUDIO-L  
AUDIO-R  
TO  
CONVERTER  
No t e s:  
IN  
Since the high quality pictures on a DVD  
disc contain a lot of information, picture  
noise may appear. In this case, adjust “Noise  
Reduction” in the Video menu. (see “Noise  
Reduction” on page 22)  
VIDEO 1  
VIDEO 3  
VHF/UHF  
OUT  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
DVD  
Y
VIDEO  
L
LINE OUT  
S
VIDEO OUT  
COMPONENT VIDEO OUT  
B-Y R-Y  
S-LINK  
DIGITAL OUT  
OPTICAL COAXIAL  
L
P
B
(MONO)  
R–AUDIO 1L VIDEO  
Y
(MONO)  
AUDIO  
R
AUDIO  
R
PR  
Some DVD Player terminals may be labeled  
differently. If so, connect as follows:  
Connect Y (green) to Y.  
COMPNENT  
PR  
PB  
VMC-10HG  
Y
Connect PB (blue) to CB, Cb or B-Y.  
(not supplied)  
Connect PR (red) to CR, Cr or R-Y.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing and Connecting the Projection TV (continued)  
Disconnect all pow er sources before making any connections.  
Co n n e ct in g a n a u d io syst e m  
For more dynamic sound, connect an audio  
(Rear of projection TV)  
system to the projection TV.  
Stereo amplifier  
1 Using an AUDIO cable, connect AUDIO  
(VAR/ FIX) OUT on the projection TV to  
one of the unused Line inputs (e.g. Tape-  
2, AUX1, etc.) on the stereo.  
IN  
VIDEO 3  
VIDEO 1  
OUT  
HRD  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
2 Set the stereo to the chosen Line input  
and use the Audio menu to set the audio  
output and switch the TVs speakers off.  
(see “Audio Out” and “Speaker” on page  
24)  
AUDIO-L  
(w hite)  
Y
VIDEO  
L
L
PB  
(MONO)  
(MONO)  
AUDIO  
R
AUDIO  
R
CONTROL  
OUT  
S
Line inputs  
PR  
COMPONENT  
AUDIO-R  
(red)  
RK-74A  
(not supplied)  
No t e :  
You can adjust VOLUME, “Bass,”  
“Treble,” “Balance,” “MTS/ SAP” and  
“Effect” with the supplied remote control.  
The control items except VOLUME can be  
adjusted only when “Audio Out” is set to  
“Variable” in the Audio menu. (see  
“Audio Out” on page 24)  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnect all pow er sources before making any connections.  
Co n n e ct in g a So n y SAVA se rie s  
sp e a ke r syst e m  
(Rear of projection TV)  
Use this connection to control the speakers  
Dolby* Pro Logic surround system and  
super woofer mode with the remote control.  
(see “SAVA SP Control” on page 24)  
SAVA series  
speaker system  
IN  
VIDEO 3  
VIDEO 1  
OUT  
1 Using the AUDIO cable supplied with the  
speaker to AUDIO (VAR/ FIX) OUT on  
the projection TV.  
AUDIO-L  
(w hite)  
S
VIDEO  
VIDEO  
MONITOR AUDIO  
(VAR/FIX)  
Y
VIDEO  
1 IN L  
1 IN R  
L
L
1
PB  
(MONO)  
(MONO)  
AUDIO  
R
AUDIO  
R
CONTROL  
OUT  
S
2 Using the CONTROL S cable, connect  
CONTROL S IN on the speaker to  
PR  
COMPONENT  
AUDIO-R (red)  
RK-G34, etc. (not supplied)  
CONTROL S  
OUT  
Audio cord supplied  
w ith the speakers  
CONTROL S OUT on the projection TV.  
2
CONTROL S IN  
* Manufactured under license from Dolby  
Laboratories Licensing Corporation.  
Additionally licensed under Canadian patent  
number 1,037,877. “Dolby,” the double-D  
symbol a and “Pro Logic” are trademarks of  
Dolby Laboratories Licensing Corporation.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Set Up  
Using the buttons on the front panel and  
inside the drop-down panel on the projection  
TV:  
Usin g t h e Re m o t e Co n t ro l  
Se t t in g Up t h e Pro je ct io n TV  
Au t o m a t ica lly  
The AUTO SET UP feature will allow you to  
set the on-screen language and set all  
receivable channels.  
In se rt in g t h e b a t t e rie s  
Front panel:  
Insert two size AA (R6) batteries (supplied)  
by matching the + and – on the batteries to  
the diagram inside the remote controls  
battery compartment.  
FLASH FOCUS TV/VIDEO  
VOLUME  
+
CHANNEL  
+
POWER TIMER/STAND BY  
The AUTO SET UP feature does not apply for  
installations that use a cable box for all channel  
selection.  
Inside the drop-dow n panel:  
You can also set up the projection TV manually.  
(see “Using the Channel Set Up menu” on pages  
26 and 27)  
FLASH FOCUS  
TV/VIDEO  
SET UP MENU  
No t e s:  
Before you perform AUTO SET UP again,  
make sure that the input from ANT (not  
AUX) is selected by pressing ANT until  
“AUXdoes not appear next to the  
channel number.  
1 Press POWER to turn on the projection  
No t e s:  
TV.  
Remove the batteries to avoid damage  
from possible battery leakage whenever  
you anticipate that the remote control  
will not be used for an extended period.  
POWER  
Perform this function during the day, with  
the antenna and/ or cable properly  
connected, to ensure that all available  
channels will be broadcasting and  
receivable.  
Handle the remote control with care.  
Avoid dropping it, getting it wet, or  
placing it in direct sunlight, near a heater  
or where the humidity is high.  
2 Press SET UP inside the drop-down panel.  
The AUTO SET UP screen appears.  
Your remote control can be programmed to  
operate most video equipment.  
(see “Operating Video Equipment” on  
page 43)  
When you perform AUTO SET UP, all the  
settings in the Video, and Audio menus  
are reset to the factory settings.  
E n g l i s h  
E s p a ñ o l  
:
[ C H + ]  
[ C H – ]  
:
F r a n ç a i s  
A u t o S e t U p  
:
[ V O L + ]  
[ V O L – ]  
:
SET UP  
First please connect  
the antenna.  
Press SET UP to exit.  
[
]
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
“Auto Program” appears and the  
projection TV starts scanning and  
presetting channels automatically. While  
scanning, the received channel will be  
displayed on the sub screen. When all the  
receivable channels are stored, the lowest  
numbered channel is displayed.  
3 Press CHANNEL + to select English,  
CHANNEL – to select Español or  
VOLUME + to select Français.  
The screen will change to reflect your  
choice.  
FLASH FOCUS  
E n g l i s h  
E s p a ñ o l  
F r a n ç a i s  
:
[ C H + ]  
[ C H – ]  
[ V O L + ]  
[ V O L – ]  
VOLUME  
+
CHANNEL  
+
:
:
To p e rfo rm AUTO SET UP a g a in  
A u t o S e t U p  
:
Press SET UP inside the drop-down panel on  
the projection TV and perform steps 3-5 on  
pages 14 and 15.  
Primero conecte la  
antena.  
[
]
Oprima SET UP para  
salir.  
Press FLASH FOCUS.  
Press SET UP again to exit.  
4 Press VOLUME – to continue.  
The cross pattern appears and FLASH  
FOCUS begins to work. The adjustment is  
completed when the cross pattern becomes  
white.  
VOLUME  
+
C o n t i n u e t o  
A u t o P r o g r a m  
Ad ju st in g t h e Co n ve rg e n ce  
Au t o m a t ica lly (FLASH FOCUS)  
The projection tube image appears on the  
screen in three layers (red, green and blue). If  
they do not converge, the color is poor and  
the picture blurs.  
?
Y e s  
N o  
:
[ C H + ]  
[ C H – ]  
:
5 Press CHANNEL + to preset channels  
automatically.  
Before you use your projection TV, be sure to  
adjust the convergence.  
CHANNEL  
+
A u t o P r o g r a m  
The FLASH FOCUS feature allows you to  
adjust the convergence automatically.  
No t e :  
FLASH FOCUS is canceled if you  
perform any other function while FLASH  
FOCUS is working.  
Tips z  
It is recommended to perform FLASH FOCUS about  
30 minutes after the projection TV is first turned on.  
You can also perform FLASH FOCUS using the Set  
Up menu on page 31.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your New Projection TV  
Wa t ch in g t h e TV  
Many TV features can be accessed directly  
through the remote control. The following  
chart will explain the function of some  
buttons found on your remote control.  
Using the White Labeled Buttons for Projection TV Operations  
PICTURE MODE  
TV (FUNCTION)  
TV POWER  
Activates the remote control for use with the projection TV.  
Press PICTURE MODE repeatedly to directly  
choose one of five different video modes that  
best suits the program you are watching.  
Vivid: Select for enhanced picture contrast and  
sharpness.  
Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1,  
VIDEO 2) appears on the screen, press TV/VIDEO until a channel number  
appears.  
Use for direct channel selection. Press 0-9 to select a channel (for example,  
to select channel 10, press 1 and 0). The channel will change after 2  
seconds, or you can press ENTER for immediate selection.  
Standard: Select to display a standard  
picture for normal viewing environments.  
Movie: Select to display a finely detailed  
picture for low light environments.  
Personal 1, Personal 2: Select to customize  
the “Picture Adjustment” of the Video menu  
according to your personal preference.  
-
0
9
and ENTER  
CH +/–  
Press to scan through the channels (+ up or – down).  
Speed Surf  
1
2
Press and hold CH + or – to change the channel number rapidly.  
Release to display the desired channel.  
When you select “Movie,” “Personal 1” and  
“Personal 2,” you can also perform the “Picture  
Adjustment” (such as “Brightness,” “Color,” etc.)  
to suit your taste. For details, see “Mode” on  
page 22.  
VOL +/–  
MUTING  
Press to adjust the volume (+ up or – down).  
Press to mute the sound. “Muting” will appear on the screen and will dim  
three seconds later. To restore sound, press again or press VOL +.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
REFER TO THE  
ILLUSTRATION OF THE  
REMOTE CONTROL ON THE  
INSIDE FRONT COVER OF  
THIS MANUAL AS YOU  
REVIEW THIS CHART  
Using the White Labeled Buttons for Projection TV Operations  
Press repeatedly to scroll through available video inputs:  
TV, VIDEO 1, VIDEO 2 and VIDEO 3.  
TV/VIDEO  
If you select “Skip” as a “Video Label” in the Set Up menu, your projection  
TV will skip the video input you selected. (see “Video Label” on page 31)  
Press to alternate or jump back and forth between two channels. The  
projection TV will jump between the current channel and the last channel  
selected using the 0-9 buttons.  
JUMP  
This is useful when you need to copy down information that appears on the  
TV’s screen.  
Press to freeze the desired picture. The frozen picture is displayed in the  
window picture while viewing the normal picture of the current channel in the  
main picture.  
FREEZE  
(yellow labeled  
button)  
6
Normal motion  
picture  
Frozen picture  
Reciipe  
flour  
sugar  
salt  
butter  
-
-
-
-
2
-
-
-
1/2  
-
-
-
-
-1/2  
- 1  
-
-
To change the location of the window picture, press V, v, B or b.  
Press FREEZE again to display the normal picture.  
Press to display the channel number, current time, channel caption (if set),  
and MTS/SAP mode (if SAP is selected). The SAP indication disappears and  
the other indications dim three seconds later.  
DISPLAY  
To turn the display off, press DISPLAY again.  
(continued)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your New Projection TV (continued)  
REFER TO THE  
ILLUSTRATION OF THE  
REMOTE CONTROL ON THE  
INSIDE FRONT COVER OF  
THIS MANUAL AS YOU  
REVIEW THIS CHART  
Using the White Labeled Buttons for Projection TV Operations  
Press repeatedly to scroll through available displays:  
XDS (Extended Data Service)  
Displays a network name, program name, program type, program length,  
program description, call letters and time of the show if the broadcaster  
offers this service.  
CC  
Caption Vision  
Displayed on the screen if the broadcaster offers this service. (see  
“Caption Vision” on page 30)  
No display  
“Off” appears and the display is canceled.  
Press repeatedly until the projection TV displays the approximate time in  
minutes (30, 60, or 90) that you want the projection TV to remain on before  
shutting off automatically.  
SLEEP  
Cancel by pressing until “Sleep Off” appears.  
Press to change between the VHF/UHF input and the AUX input. (for  
detailed connection information, see “Cable and antenna” or “Cable box and  
cable” on page 5)  
ANT  
(AUX input)  
Press to scroll through the Multi-channel TV Sound (MTS) options:  
Stereo, SAP, Mono and Auto SAP. (see “MTS/SAP” on page 23)  
MTS/SAP  
Press to select an audio option:  
Simulated, Surround, BBE and Effect Off. (see “Effect” on page 23)  
Press when you are finished using a VCR and you want to switch to the TV  
input. The VCR power will remain on.  
TV/VTR  
Press to turn off the projection TV and all other Sony equipment.  
SYSTEM OFF  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wa t ch in g Tw o Pro g ra m s a t On e Tim e — PIP  
The Picture-in-Picture (PIP) feature allows  
you to view two channels simultaneously,  
one in the full size “main” picture and one in  
Using the Yellow Labeled Buttons for PIP Operations  
Press to display a window picture.  
Each time you press this button, the picture size will change  
(1/9 n1/16 nno display).  
a smaller “window” picture.  
PIP  
You can move the window picture to any  
location on the screen.  
To close the window picture, press PIP repeatedly until it disappears.  
The symbol “bor “B”  
indicates w hich picture's  
TV channel or input  
The symbol “”  
indicates w hich  
picture's sound is being  
received.  
Press POSITION repeatedly to change the location of the window picture  
(counterclockwise) around the main picture.  
You can also change the location by pressing the V, v, B or b button.  
The window picture moves in the direction of the arrow indicated on the  
pressed button.  
POSITION  
source can be changed.  
or  
TV channel or input-  
source mode for the  
main picture* (yellow -  
green-colored)  
6
Main  
picture  
10  
Press to select either the main or window picture in order to change the  
TV channel or video source using the white labeled buttons below. The  
symbol “b” (or “B”) will appear to indicate which picture’s channel or input  
mode can be changed.  
TV channel or input-  
source mode for the  
w indow picture*  
(w hite-colored)  
ACTIVE  
Window  
picture  
Press repeatedly to scroll through the available video inputs for the  
picture on which the symbol “b” (or “B”) is displayed. (see “TV/VIDEO” on  
page 17)  
TV/VIDEO  
* It will dim in about 3 seconds.  
(white labeled  
button)  
Tip z  
If you press RESET in PIP mode, the window picture  
will move to the bottom right (factory-preset location).  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Your New Projection TV (continued)  
REFER TO THE  
ILLUSTRATION OF THE  
REMOTE CONTROL ON THE  
INSIDE FRONT COVER OF  
THIS MANUAL AS YOU  
REVIEW THIS CHART  
Using the Yellow Labeled Buttons for PIP Operations  
CH  
Press to select the TV channel on which the symbol “b” is  
displayed. (for details, see “Watching the TV” on page 16)  
Speed Surf  
JUMP  
or  
-
or  
0
9
1 Press and hold CH + or – to change the channel number rapidly.  
2 Release to display the desired channel.  
and ENTER  
No t e :  
(white labeled button)  
If one of the pictures received through  
PIP is snowy, the entire screen may  
become unstable. In this case, erase the  
snowy channel. (see “Channel Skip/  
Add” on page 27)  
ANT  
Press to change between the VHF/UHF input and the AUX input for the picture on  
which the symbol “b” (or “B”) is displayed.  
(white labeled  
button)  
Press to alternate sound between the main picture and the window picture. The  
symbol “ ” will appear for a few seconds to indicate which picture’s sound is being  
received.  
AUDIO  
This is useful when you need to copy down information of the main picture.  
Press to freeze the desired scene in the main picture. The frozen picture is displayed  
in the window picture while viewing the normal picture in the main picture. The  
window picture size is automatically changed to 1/9 if it was 1/16.  
Press again to resume normal PIP viewing.  
FREEZE  
Press to switch the audio and video of the main picture and the window picture.  
Each time you press SWAP, the picture and sound of the two will be exchanged.  
SWAP  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus)  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V i s i o n : C C 1  
L a n g u a g e :  
V i d e o L a b e l  
3 Press V or v to highlight the desired  
option.  
Le a rn in g Me n u Se le ct io n  
E n g l i s h  
F l a s h F o c u s :  
N o  
Use the MENU button to access a menu and  
buttons to alter the  
settings. Use the following example to learn  
ch  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V i s i o n : C C 1  
L a n g u a g e :  
V i d e o L a b e l  
use the V, v, B, b and  
E n g l i s h  
MENU  
Exit  
F l a s h F o c u s :  
N o  
Move  
Select  
ch  
how to modify settings.  
1 Press the MENU button.  
Some adjustment menus may require  
further operations. For details, see each  
menu option.  
MENU  
Exit  
Move  
Select  
The main menu appears.  
V i d e o  
M o d e :  
P i c t u r e A d j u s t m e n t  
4 Press  
.
V i v i d  
To return to the previous screen (except  
for the slider adjustment menus), choose  
MENU  
T r i n i t o n e :  
N o i s e R e d u c t i o n : O f f  
H i g h  
Options for your selection (Pop-up menu  
or Adjusting menu) will be displayed.  
ch  
” at the bottom of the menu and press  
or B.  
MENU  
Move  
Select  
Exit  
6 Once you have completed all menu  
corrections, press MENU to exit the menu  
2 Press V or v to highlight the desired menu  
Pop-up menu  
Adjusting menu  
screens.  
and press  
to activate it.  
MENU  
S e t U p  
V i d e o L a b e l  
P a r e n t a l C o n t r o l  
C a p t i o n V i s i o n : C C 1  
V I D E O 1 :  
V I D E O 2 :  
V I D E O 3 :  
V I D E O 1  
V I D E O 2  
V I D E O 3  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V
S e t N e w  
L a n g u a g e :  
E n g l i s h  
V i d e o L a b e E s p a ñ o l  
F l a s h F o c u Fr a n ç ai s
ch  
L a n g u a g e
V i d e o L a b
F l a s h F o c u s :  
P a s s w o r d  
_
_
_
_
To e xit fro m t h e m e n u s a t a n y  
t im e  
N o  
ch  
MENU  
Move  
Select  
Exit  
MENU  
Exit  
Move  
Select  
MENU  
Move  
Select  
Exit  
Press MENU.  
5 Press V or v to make your selection and  
press to activate it.  
The previous screen will reappear.  
You may also press b to activate your  
selection.  
Tip z  
You can also use the MENU,  
/
and  
buttons  
inside the front drop-down panel of the projection TV  
for the menu selection.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
You can choose one of five different video modes that best suits the program you  
Mode  
Customized  
picture viewing  
Usin g t h e Vid e o Me n u  
are watching. You can also perform the “Picture Adjustment” (such as  
“Brightness,” “Color,” etc.) for “Movie,” “Personal 1” or “Personal 2” to suit your  
taste.  
Vivid: Select for enhanced picture contrast and sharpness.  
Standard: Select to display a standard picture for normal viewing  
environments.  
V i d e o  
M o d e :  
V i v i d  
P i c t u r e A d j u s t m e n t  
T r i n i t o n e :  
H i g h  
N o i s e R e d u c t i o n : O f f  
ch  
Movie: Select to display a finely detailed picture for low light environments.  
Personal 1, Personal 2: Select to customize the “Picture Adjustment” of the  
Video menu according to your personal preference.  
Press PICTURE MODE on the remote control for direct selection of a “Mode”  
setting.  
MENU  
Move  
Select  
Exit  
For detailed information on using the remote  
control to modify menu settings, refer to  
“Learning Menu Selection” on page 21.  
First select “Movie,” “Personal 1” or “Personal 2” from “Mode,” then highlight the  
Picture  
Adjustment  
Picture adjustment  
desired option using the V or v button and press  
to display the adjusting  
To se le ct t h e Vid e o  
Display / Highlight  
MENU  
m e n u :  
slider of the selected option.  
P e r s o n a l  
P i c t u r e  
1
Picture: Adjust slider right (up) to increase picture  
contrast; left (down) to decrease it.  
Brightness: Adjust slider right (up) to brighten the  
picture; left (down) to darken it.  
/ Select  
B r i g h t n e s s  
C o l o r  
H u e  
S h a r p n e s s  
ch  
Color: Adjust slider right (up) to increase color  
intensity; left (down) to decrease it.  
MENU  
Move  
Select  
Exit  
Hue: Adjust slider right (up) to increase the green  
tones; left (down) to increase the red tones.  
Sharpness: Adjust slider right (up) to sharpen the  
picture; left (down) to soften it.  
To re st o re t h e fa ct o ry se t t in g s  
Press RESET on the remote control while the  
Video menu is selected. To restore each  
“Mode” to the factory setting, press RESET  
after selecting the mode to be reset.  
High: Select to give the white colors a blueish tint.  
Medium: Select to give the white colors a neutral tint.  
NTSC Standard: Select to give the white colors a reddish tint.  
Trinitone  
White intensity  
adjustment  
Select On to reduce picture noise.  
Select Off to cancel the feature.  
Noise Reduction  
Noise reduction  
“Noise Reduction” can be set separately from the “Mode” settings of the Video  
menu.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g t h e Au d io Me n u  
Treble  
Sound adjustment  
Adjust slider right (up) to increase high pitched sounds.  
Adjust slider left (down) to decrease high pitched sounds.  
A u d i o  
T r e b l e  
B a s s  
B a l a n c e  
M T S / S A P :  
A u t o V o l u m e :  
E f f e c t :  
S p e a k e r :  
Bass  
Sound adjustment  
Adjust slider right (up) to increase low pitched sounds.  
Adjust slider left (down) to decrease low pitched sounds.  
Sliders  
}
S t e r e o  
O n  
S u r r o u n d  
O n  
ch  
Balance  
Sound adjustment  
Adjust slider right (up) to emphasize right speaker volume.  
Adjust slider left (down) to emphasize left speaker volume.  
A u d i o O u t : V a r i a b l e  
S A V A S P C o n t r o l  
MENU  
Move  
Select  
Exit  
MTS/SAP  
When the sound is intermittent due to poor reception conditions, select “Stereo”  
or “SAP.”  
Stereo: Select for stereo reception when viewing a program broadcast in stereo.  
SAP: Select to listen to a bilingual broadcast. (non-SAP programs will be muted  
when this feature is selected)  
Enjoy stereo,  
bilingual and mono  
programs.  
For detailed information on using the remote  
control to modify menu settings, refer to  
“Learning Menu Selection” on page 21.  
Mono: Select for mono reception. (use to reduce noise during stereo broadcasts)  
Auto SAP: Select to listen to SAP when a SAP program is broadcast and return  
To se le ct t h e Au d io  
m e n u :  
to stereo reception automatically for non-SAP programs.  
MTS/SAP  
Quick MTS access: Press  
on the remote control to cycle through the  
Display / Highlight  
/ Select  
“MTS/SAP” options as follows: Stereo n SAP n Mono n Auto SAP.  
MENU  
Auto Volume  
Adjust the sound  
level.  
On: Sound output coming from TV speakers have the volume level equalized for all  
channel audio inputs when broadcasts have different sound transmission levels.  
Off: Sound output coming from the TV speakers varies according to the received  
channel.  
To re st o re t h e fa ct o ry se t t in g s  
Press RESET on the remote control while the  
Audio menu is selected.  
Effect  
“Effect” can only be set when “Speaker” is set to “On” or “Off.”  
Simulated: Adds a surround-like effect to mono programs.  
Surround: Simulates sound with the atmosphere of a movie theater or a concert  
hall for stereo programs.  
BBE*: Centers the sound intensity to the front, creating an effect as if you were  
seated in front of an orchestra.  
Customizes  
surround sound  
effects based on the  
program’s audio  
type.  
* The BBE is manufactured by Sony Corporation  
under license from BBE Sound, Inc. It is covered  
by U.S. Patent No. 4,638,258 and No. 4,482,866.  
The word “BBE” and the BBE symbol are the  
trademarks of BBE Sound, Inc.  
Off: Normal stereo or mono reception.  
Quick Effect access: Press  
on the remote control to cycle through the  
“Effect” options as follows: Simulated n Surround n BBE n Effect Off.  
(continued) 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
On: Select to listen to the sound from the projection TV speakers alone.  
Speaker  
Off: Select to turn off the projection TV speakers and listen to the  
Custom selection  
of audio output  
source  
projection TV’s sound only through an external audio system’s speakers.  
SAVA SP: Select to turn off the projection TV speakers and listen to the projection  
TV’s sound only through the Sony SAVA series speaker system. You can  
adjust volume, muting, “Surround Mode,” and “Super Woofer Mode” with the  
projection TV’s remote control. (see “SAVA SP Control” below)  
“Audio Out” can only be set when “Speaker” is set to “Off.”  
Fixed: Sound output is held at a fixed level through the audio system.  
Use the AV receiver’s remote control to adjust the volume.  
Variable: Sound output varies according to the TV settings.  
Useful when you want to use your remote control to control the output of a  
separate audio system.  
Audio Out  
Easy control of  
volume adjustment  
“SAVA SP Control” can only be set when Sony SAVA speaker system is  
connected to the AUDIO (VAR/FIX) OUT connectors and “Speaker” is set to  
“SAVA SP.” (see “Speaker” above)  
You can also adjust the SAVA speaker’s volume using VOL +/– of the projection  
TV’s remote control.  
SAVA SP Control  
Controls Sony  
SAVA speaker’s  
mode.  
Surround Mode: Select to activate the SAVA Speaker’s surround mode.  
Super Woofer Mode: Select to activate the SAVA Speaker’s super woofer mode.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Spring: Select Yes to compensate for Daylight Saving Time.  
The current time automatically moves ahead one hour.  
Fall: Select No at the end of Daylight Saving Time.  
The current time moves back one hour.  
Usin g t h e Tim e r Me n u  
Daylight Savings  
Automatically  
T i m e r  
D a y l i g h t S a v i n g s : Y e s  
C u r r e n t T i m e  
adjusts the time.  
O n  
/
O f f T i m e r  
C u r r e n t T i m e  
– – – – AM  
1 Press  
(Sun-Sat) is displayed, and press  
2 Press V or v until the current hour (1-12) and  
AM/PM is displayed, and press  
3 Press V or v until the current minute (00-59) is  
displayed, and press  
, then press V or v until the current day  
Current Time  
Necessary for the  
Timer.  
ch  
.
:
– – –  
-
-
-
-
-
: -  
-
A M  
Exit  
MENU  
Move  
Select  
.
MENU  
Move  
Select  
Exit  
After setting the clock you can use the timer  
to turn the projection TV on and off.  
.
The clock has now started. Press MENU to exit.  
For detailed information on using the remote  
control to modify menu settings, refer to  
“Learning Menu Selection” on page 21.  
O n / O f f T i m e r  
– – – – – –  
1 Press V or v until the desired day or range of days  
(Every Sun-Sat, Every Mon-Fri, Sunday, Monday, ...  
Saturday, Every Sunday, ... Every Saturday) is  
On/Off Timer  
Wake up or  
– – : – – AM  
h
ch  
– – –  
scheduled viewing.  
displayed, and press  
2 Press V or v until the time (hours and minutes) that  
you want the projection TV to remain on is displayed,  
.
To se le ct t h e Tim e r  
Display / Highlight  
MENU  
m e n u :  
S u n 1 2 : 0 0 A M  
Move Select  
MENU  
Exit  
/ Select  
and then press  
3 Press V or v to set the time duration (maximum of 6 hours) and press  
4 Press V or v to select the desired channel and press  
.
.
.
The timer is now set. The TIMER/STAND BY indicator on your projection TV  
will be lit.  
Tip z  
Press MENU to exit. To cancel your timer setting, press RESET while in the On/  
Off Timer window. Performing Auto Program will erase all Timer settings.  
Set daylight saving time before setting the clock. Any  
loss of power will cause these settings to be erased.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
ch  
Usin g t h e Ch a n n e l Se t Up  
C h a n n e l C a p t i o n  
C h a n n e l :  
Channel  
Caption  
Easy recognition  
of the channel  
you are watching  
You can add a caption for up to 32 channels of VHF/  
UHF input.  
With the Channel Caption window open:  
Me n u  
– – –  
– – – – –  
C a p t i o n :  
C h a n n e l S e t U p  
C h a n n e l C a p t i o n  
F a v o r i t e C h a n n e l : A u t o  
C h a n n e l S k i p / A d d  
A u t o P r o g r a m  
1 Press  
channel. You can view the channel that is selected  
with the Channel Caption menu in the sub screen.  
and then press V or v to select the desired  
MENU  
Move  
Select  
Exit  
C a b l e :  
O n  
ch  
2 Press  
.
3 Press V or v to display the first letter or number of the  
caption and press  
to select it.  
MENU  
Move  
Select  
Exit  
Repeat until up to five digits are selected.  
4 Press  
.
For detailed information on using the remote  
control to modify menu settings, refer to  
“Learning Menu Selection” on page 21.  
To erase a caption, press RESET.  
Favorite  
Channel  
User’s favorite  
channels  
The Favorite Channel feature enables easy access to the eight channels that you  
preset (or the last channel that you were watching).  
(for details on how to set up this feature, see “Setting and Selecting Favorite  
Channel” on page 28)  
ch  
To se le ct t h e Ch a n n e l Se t Up  
m e n u :  
ch  
Display / Highlight  
/ Select  
MENU  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Channel  
Skip/Add  
Skips unnecessary  
channels.  
After AUTO SET UP, you can erase unnecessary  
channels from the channel preset memory.  
With the Channel Skip/Add window open:  
1 Press V or v to select the desired channel. You can  
view the channel that is selected with the Channel  
Skip/Add menu in the sub screen. You can also use  
CH +/– or 0–9 and ENTER buttons.  
C h a n n e l S k i p / A d d  
1 : S k i p  
2 : S k i p  
ch  
3 :  
4 :  
5 :  
6 :  
7 :  
8 :  
9 :  
A d d  
A d d  
A d d  
A d d  
A d d  
A d d  
A d d  
Select a channel  
Move Select  
MENU  
Exit  
2 Press  
.
3 Press V or v to select Skip, and press  
.
The selected channel will be erased.  
If you want to re-enter the skipped channel, follow the steps above and select  
Add.  
Select Yes to signal the projection TV to automatically program all receivable  
channels. When all the receivable channels are stored, the lowest numbered  
channel is displayed.  
Auto Program  
Automatic  
channel presetting  
Select No to cancel Auto Program.  
Select On if your projection TV is connected to a cable system.  
Cable  
Select Off if your projection TV is connected to an antenna.  
Cable system  
setting  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
2 Press V or v to select “Manual” and press  
4 Press V or v to select a channel and press  
Se t t in g a n d Se le ct in g  
Fa vo rit e Ch a n n e l  
The Favorite Channel feature of your  
projection TV enables easy access to the eight  
channels that you preset (or the last channel  
that you were watching).  
.
.
The Favorite Channel menu will appear.  
If you set Channel Caption names (e.g.  
CNN, HBO), they will also be displayed.  
(see “Channel Caption” on page 26)  
You have now selected a favorite channel.  
F a v o r i t e C h a n n e l  
ch  
1 .  
2 .  
3 .  
4 .  
5 .  
6 .  
7 .  
1
8
C N N  
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
8 . 1 0 0  
F a v o r i t e C h a n n e l  
ch  
Your Favorite Channel options can be set  
automatically or manually.  
1 .  
2 .  
3 .  
4 .  
5 .  
6 .  
7 .  
1
2
C N N  
Select a channel  
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
The factory setting for “Favorite Channel” is  
“Auto.”  
5 Use V and v to program other favorite  
8 . 1 0 0  
channels. (Follow steps 3 and 4.)  
Select a position  
When “Favorite Channel” is set to “Auto,”  
the last eight channels selected with the 0–9  
buttons will be set as Favorite Channel  
options. If you want to input your own  
selections as Favorite Channel settings, set to  
“Manual.”  
6 Press MENU when you have finished.  
Your favorite channels are now ready for  
use.  
3 Press V or v to select a position (1–8), and  
press  
.
F a v o r i t e C h a n n e l  
ch  
1 .  
2 .  
3 .  
4 .  
5 .  
6 .  
7 .  
1
2
C N N  
Se t t in g Fa vo rit e Ch a n n e l m a n u a lly  
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
1 Select “Favorite Channel” from the  
Channel Set Up menu. (see page 26)  
8 . 1 0 0  
C h a n n e l S e t U p  
Select a channel  
C h a n n e l C a p t i o n  
F a v o r i t e C h a n n e : A u t o  
Manual  
C h a n n e l S k i p / A d d  
A u t o P r o g r a m  
C a b l e :  
O n  
ch  
MENU  
Move  
Select  
Exit  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Usin g Fa vo rit e Ch a n n e l  
3 Press  
to select the channel.  
Ch a n g in g Fa vo rit e Ch a n n e l ch o ice s  
You have the option of returning to the  
Favorite Channel screen to adjust any of your  
favorite channel choices.  
The selected channel will be displayed for  
normal viewing.  
You can use the Favorite Channel feature to  
directly select the channel you want to watch.  
1 Press  
once.  
Simply proceed as described in “Setting  
Favorite Channel manually” (skip step 2 if  
“Manual” is already selected).  
The favorite channel menu and a window  
picture will be superimposed over the  
current channel. The window picture  
displays the channel selected from the  
menu.  
When you reach step 3, select the position  
you want to change and press  
v to select a new channel.  
. Press V or  
To cancel the favorite channel menu before  
selecting a channel, press V or v to select  
“Exit” at the bottom of the menu and press  
.
F a v o r i t e C h a n n e l  
1
2
C N N  
ch  
1 .  
2 .  
3 .  
4 .  
5 .  
6 .  
7 .  
6
2
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
1 0 0  
E x i t  
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
8 . 1 0 0  
Select a channel  
2 Press V or v to select the channel that you  
Press MENU when you are done.  
wish to view from the menu.  
The picture of the selected channel will be  
displayed in the window picture.  
1
2
C N N  
1 0 S P T N  
2 0  
3 0  
4 0  
5 0  
1 0 0  
E x i t  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
Allows you to block TV programs that you feel are unsuitable for your  
children.  
(see “Using the Parental Control Feature” on page 32 for details)  
Usin g t h e Se t Up Me n u  
Parental  
Control  
Blocks programs  
unsuitable for  
children.  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V i s i o n : C C 1  
L a n g u a g e :  
E n g l i s h  
V i d e o L a b e l  
F l a s h F o c u s :  
N o  
ch  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V i s i o n :  
L a n g u a g e :  
V i d e o L a b e l  
F l a s h F o c u s :  
Some programs are broadcast with Caption Vision.  
Caption Vision  
Television closed  
caption display  
C C 1  
C C 2  
C C 3  
To display “Caption Vision,” select CC 1, CC 2,  
CC 3, CC 4, TEXT1, TEXT2, TEXT3 or TEXT4 from  
the menu. Then press the CC button until “Caption  
Vision” is displayed.  
MENU  
Exit  
Move  
Select  
C C 4  
ch  
T e x t 1  
T e x t 2  
T e x t 3  
T e x t 4  
For detailed information on using the remote  
control to modify menu settings, refer to  
“Learning Menu Selection” on page 21.  
MENU  
Move  
Select  
Exit  
CC 1, CC 2, CC 3 or CC 4 displays a printed  
version of the dialogue or sound effects of a  
program. (The mode should be set to CC 1 for most  
programs.) TEXT1, TEXT2, TEXT3, or TEXT4  
displays network/station information presented using  
either half or the whole screen.  
To se le ct t h e Se t Up  
m e n u :  
Display / Highlight  
/ Select  
Notes:  
MENU  
• Poor reception of TV programs can cause errors in Caption Vision and XDS.  
Captions may appear with a white box or other errors instead of the intended  
text.  
• XDS, Caption Vision, and the status display cannot be used at the same time.  
Select from available languages (English, Español or Français) to display all  
Language  
menus in your language of choice.  
Preferred language  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Video Label  
Easy recognition of  
connected  
This feature allows you to label each input mode so  
that you can easily identify the connected equipment  
(e.g. you can label VIDEO 1 IN as VHS).  
V i d e o L a b e l  
V I D E O 1 :  
V I D E O 2 :  
V I D E O 1  
V I D E O 2  
V I D E O 3  
V I D E O 3 :  
equipment  
(e.g. SAT, VHS,  
etc.)  
MENU  
Exit  
Move  
Select  
With the Video Label window open:  
V i d e o L a b e l  
1 Press V or v to select the input mode you want to  
V I D E O 1 :  
V I D E O 2 :  
V I D E O 3 :  
V i d e o 1  
V H S  
8 m m  
B e t a  
L D  
label and press  
.
S A T  
D V D  
A V R E C E I V E R  
D T V  
2 Press V or v to select the label and press  
.
S k i p  
MENU  
Move  
Select  
Exit  
Video Label Options:  
VIDEO 1: VIDEO 1, VHS, 8mm, Beta, LD, SAT, DVD, AV RECEIVER, DTV,  
Skip  
VIDEO 2/3: VIDEO 2/VIDEO 3, VHS, 8mm, Beta, LD, SAT, DVD, DTV, Skip  
If you select “Skip,” your projection TV will skip this connection when you scan  
through video sources using the TV/VIDEO button.  
Select Yes and press  
adjustment is completed, the cross pattern on the screen becomes white. (for  
details, see page 15)  
to start Flash Focus adjustment. When the  
Flash Focus  
Automatic  
convergence  
adjustment  
Select No to cancel Flash Focus.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
1 Select “Parental Control” from the Set Up  
4 Make sure that “Country ”is highlighted,  
and press  
Usin g t h e Pa re n t a l Co n t ro l  
Fe a t u re  
The TV programs and movies shown on TV  
are given a rating signal based on the  
following rating systems.  
menu. (see page 30)  
.
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V
P a r e n t a l C o n t r o l  
C o u n t r y : 
U . S . A .  
C a n a d a  
S e t N e w  
L a n g u a g e
P a r e n t a l L o c
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
P a s s w o r d  
_
_
_
_
V i d e o L a b
F l a s h F o c u s :  
N o  
ch  
In U.S.A.: U.S. Television Parental  
Guidelines to rate television programs (U.S.  
TV ratings), and Motion Picture Association  
of America (MPAA) Guidelines to rate  
movies including those shown on TV (movie  
ratings)  
In Canada: Canadian English Language  
ratings to rate television programs in English,  
and Canadian French Language ratings to  
rate those in French.  
MENU  
Move  
Select  
Exit  
MENU  
Move  
Select  
Exit  
2 Enter a four digit password* using the 0–  
5 Press V or v to select your country (U.S.A.  
or Canada), and press  
9 buttons.  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V
C o n f i r m  
L a n g u a g e
V i d e o L a b
F l a s h F o c u s :  
.
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
P a s s w o r d  
U . S . A .  
_
_
_
_
Off  
C h i l d  
C h a n g e P a s s w o r d  
N o  
ch  
R a t i n g :  
MENU  
Move  
Select  
Exit  
To block programs you feel are unsuitable for  
your children, you need to set the TV for the  
desired rating systems. Sonys predetermined  
ratings are also available.  
See pages 39 to 41 for a description of the  
ratings.  
The Parental Control feature of the TV  
functions by receiving the rating signal from  
your local broadcasting station or cable  
service provider.  
MENU  
Move  
Select  
Exit  
* Do not enter “4357” corresponding to “HELP”  
on a phone number pad. (see page 39)  
6 Press V or v to select “Parental Lock,”  
and press  
3 To confirm the password, re-enter the  
.
same password with the 0–9 buttons.  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g :  
Your password is stored and the Parental  
Control menu automatically appears.  
If you want to change the password, see  
U . S . A .  
On
C Off  
C h a n g e P a s s w o r d  
page 38.  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
MENU  
Move  
Select  
Exit  
Off  
Act iva t in g t h e Pa re n t a l Co n t ro l  
Fe a t u re  
First, set a password, then select your desired  
rating from Sony’s predetermined ratings.  
32  
MENU  
Move  
Select  
Exit  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To d e a ct iva t e t h e Pa re n t a l Co n t ro l  
fe a t u re  
3 Press V or v to select “Parental Lock,”  
and press  
7 Press V or v to select “On,” and press  
.
.
P a r e n t a l C o n t r o l  
P a r e n t a l C o n t r o l  
If you set “Parental Lock” in the Parental  
Control menu to “Off,” the Parental Control  
feature will not work and you can view all  
TV programs and movies shown on TV.  
C o u n t r y :  
U . S . A .  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
P a r e n t a l L o c k :  
On
C Off  
C h a n g e P a s s w o r d  
On  
R a t i n g :  
MENU  
Move  
Select  
Exit  
MENU  
1 Select “Parental Control” from the Set Up  
Move  
Select  
Exit  
menu. (see page 30)  
4 Press V or v to select “Off,” and press  
8 Press V or v to select “Rating,” and press  
S e t U p  
P a r e n t a l C o n t r o l  
C a p t i o n V
L a n g u a g e
V i d e o L a b e l  
F l a s h F o c u s :  
.
.
1  
N o  
P a s s w o r d  
_
_
_
_
P a r e n t a l C o n t r o l  
P a r e n t a l C o n t r o l  
ch  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
C o u n t r y :  
U . S . A .  
Off  
P a r e n t a l L o c k :  
R a t i n g :  
On  
C h i l d  
C h a n g e P Yo u t h  
Y o u n g A d u l t  
C u s t o m  
MENU  
Move  
Select  
Exit  
A g e s u p t o  
Move Select  
6
2 Enter your four digit password using the  
MENU  
Move  
Select  
Exit  
MENU  
Exit  
0-9 buttons.  
9 Press V or v to select a desired rating  
The Parental Control menu appears.  
5 Press MENU to exit the menu.  
(“Child,” “Youth” and “Young Adult”),  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
and press  
.
On  
If you want to select the ratings from  
“Custom,” go to step 4 of “Selecting a  
Custom Rating in U.S.A.” on page 34 or  
“Selecting a Custom Rating in Canada”  
on page 37, according to your “Country”  
setting.  
MENU  
Move  
Select  
Exit  
10 Press MENU to exit the menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
3 Press V or v to select “Rating,” and press  
To u n lo ck t h e Pa re n t a l Co n t ro l fe a t u re  
t e m p o ra rily  
Se le ct in g a Cu st o m Ra t in g in  
U.S.A.  
.
When you select a Parental Control program,  
no sound or picture except for a channel  
P a r e n t a l C o n t r o l  
If you want to select the ratings to be blocked  
from “Custom” once you have activated the  
Parental Control feature (page 33), follow the  
procedure below.  
C o u n t r y :  
U . S . A .  
P a r e n t a l L o c k :  
R a t i n g :  
C h a n g e P Yo u t h  
Y o u n g A d u l t  
C u s t o m  
On  
C h i l d  
number will appear. The  
indicator is  
displayed. To view the program, follow the  
steps below.  
A g e s u p t o  
Move Select  
6
MENU  
Exit  
For a detailed description of each rating, see  
“What the Ratings Mean” on pages 39 to 41.  
1 Press ENTER to display the “Password”  
screen.  
4 Press V or v to select “Custom,” and  
press  
1 Select “Parental Control” from the Set Up  
2 Enter your password using the 0–9  
buttons. Parental Control will be canceled  
(“Parental Lock” set to “Off”) until you  
turn your projection TV off.  
.
menu. (see page 30)  
S e t U p  
P a r e n t a l C o n t r o l  
C u s t o m R a t i n g  
C a p t i o n V
1  
N o  
P a s s w o r d  
T V R a t i n g  
M o v i e R a t i n g  
_
_
_
_
L a n g u a g e
V i d e o L a b e l  
F l a s h F o c u s :  
U n r a t e d :  
V i e w A l l  
ch  
MENU  
Move  
Select  
Exit  
S e l e c t c a t e g o r y  
MENU  
Move  
Select  
Exit  
2 Enter your four digit password using the  
0–9 buttons.  
The Parental Control menu appears.  
Make sure that “Country” is set to  
“U.S.A.”  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
On  
MENU  
Move  
Select  
Exit  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7 Press V or v to select “ ,” and press  
The indicator automatically appears  
.
8 Press B or b to select the extender to be  
viewed, and press  
First, select a TV rating.  
.
5 Press V or v to select “TV Rating,” and  
beside the selected rating and all “higher”  
ratings, indicating that the programs that  
match the ratings will be blocked.  
press  
.
T V R a t i n g  
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
:FV _  
T V R a t i n g  
:D – L – S – V –  
:D – L – S – V –  
_
_
_
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
T V R a t i n g  
:FV _  
:
L – S – V  
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
:D _ L _ S _ V _  
:D _ L _ S _ V _  
:FV _  
B l o c k c o n t e n t  
Move Select  
MENU  
Exit  
:
L _ S _ V _  
:D – L – S – V –  
:D – L – S – V –  
S e l e c t r a t i n g  
Move  
:
L – S – V  
MENU  
Exit  
Select  
9 Press V or v to select “–,” and press  
.
S e l e c t c a t e g o r y  
Move Select Exit  
MENU  
“–” appears beside the selected extender,  
indicating that the programs that match  
the extender can be viewed.  
6 Press V or v to select the TV rating to be  
blocked, and press  
Some ratings have additional content  
ratings called “extenders.” The extenders  
are defined as follows: D (sexually  
suggestive Dialog), FV (Fantasy  
Violence), L (coarse Language), S (Sexual  
situations) and V (Violence). By setting  
the extenders, you can define additional  
viewing limits. For more details of  
extenders, see page 41.  
.
If you select “ ,”  
is displayed to  
T V R a t i n g  
show that the programs that match the  
extender will be blocked again.  
_
_
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
:FV _  
:D _ L _ S _ V _  
:D _ L _ S _ V _  
T V R a t i n g  
:
L _ S _ V _  
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
:FV _  
A l l o w r a t i n g  
Move Select  
MENU  
Exit  
:D – L – S – V _  
:D – L – S – V –  
:
L – S – V  
All of the extenders included in the  
selected ratings will be blocked. If you  
wish to allow any of them to be viewed,  
go to step 8.  
S e l e c t c a t e g o r y  
Move Select Exit  
MENU  
(continued)  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
To b lo ck TV p ro g ra m s a n d /o r m o vie s  
fo r w h ich a ra t in g sig n a l is n o t g ive n  
(NR a n d N/A)  
10 Repeat steps 8 and 9 for other extenders.  
13 Press V or v to select the movie rating to  
be blocked, and press  
.
All programs that match the ratings you  
select and higher, except for the  
extenders that were canceled, will be  
blocked.  
M o v i e R a t i n g  
G
For a description of the NR and N/ A ratings,  
see page 40.  
PG  
PG–13  
R
NC–17  
X
11 After setting of the TV rating is complete,  
1 Perform steps 1–4 of “Selecting a Custom  
B l o c k r a t i n g  
Move Select  
press V or v to select “ ,” and press  
.
Rating in U.S.A.” on page 34.  
MENU  
Exit  
2 Press V or v to select “Unrated,” and  
C u s t o m R a t i n g  
T V R a t i n g  
M o v i e R a t i n g  
press  
.
14 Press V or v to select “ ,” and press  
The indicator automatically appears  
.
U n r a t e d :  
V i e w A l l  
C u s t o m R a t i n g  
beside the selected rating and all “higher”  
ratings, indicating that the programs that  
match the ratings will be blocked.  
T V R a t i n g  
M o v i e R a t i n g  
U n r a t e d :  
S e l e c t c a t e g o r y  
Move Select Exit  
View A l l  
T V  
M o v i e  
MENU  
B o t h  
Second, select a movie rating.  
12 Press V or v to select “Movie Rating,” and  
press  
M o v i e R a t i n g  
N o b l o c k  
Move Select  
G
PG  
PG–13  
R
MENU  
Exit  
.
NC–17  
X
M o v i e R a t i n g  
S e l e c t r a t i n g  
Move Select  
G
PG  
PG–13  
R
NC–17  
X
MENU  
Exit  
15 Press MENU to exit the menu.  
S e l e c t r a t i n g  
Move Select  
MENU  
Exit  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Press V or v to select “Rating,” and press  
3 Press V or v to select the type of  
Se le ct in g a Cu st o m Ra t in g in  
Ca n a d a  
.
programs to be blocked, and press  
.
C u s t o m R a t i n g  
P a r e n t a l C o n t r o l  
If you want to select the ratings to be blocked  
from “Custom” once you have activated the  
Parental Control feature (page 33), follow the  
procedure below.  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g :  
C h a n g e P Yo u t h  
Y o u n g A d u l t  
C u s t o m  
C a n a d a  
T V R a t i n g  
M o v i e R a t i n g  
U n r a t e d :  
On  
C h i l d  
V i e w A l l  
T V
M o v i e  
B o t h  
B l o c k a l l u n r a t e d  
p r o g r a m m i n g  
A g e s u p t o  
Move Select  
6
MENU  
Move  
Select  
Exit  
MENU  
For a detailed description of each rating, see  
“What the Ratings Mean” on pages 41 and  
42.  
Exit  
4 Press V or v to select “Custom,” and press  
.
1 Select “Parental Control” from the Set Up  
To b lo ck ...  
Se le ct ...  
menu. (see page 30)  
C u s t o m R a t i n g  
No program  
View All  
S e t U p  
P a r e n t a l C o n t r o l  
E n g l i s h R a t i n g  
F r e n c h R a t i n g  
U . S . A . R a t i n g  
(to view any unrated TV  
program and movie)  
C a p t i o n V
1  
N o  
P a s s w o r d  
_
_
_
_
L a n g u a g e
V i d e o L a b e l  
F l a s h F o c u s :  
ch  
Unrated TV programs  
Unrated movies  
TV  
S e l e c t c a t e g o r y  
MENU  
Move  
Select  
Exit  
MENU  
Move  
Select  
Exit  
Movie  
Both  
2 Enter your four digit password using the  
Unrated TV programs and  
movies  
(continued)  
0–9 buttons.  
The Parental Control menu appears.  
Make sure that “Country” is set to  
4 Press MENU to exit the menu.  
“Canada.”  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
C a n a d a  
On  
MENU  
Move  
Select  
Exit  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
5 Press V or v to select the rating you want  
to block, and press  
The selected rating appears.  
7 Press V or v to select “ ,” and press  
The indicator automatically appears  
.
Ch a n g in g t h e Pa ssw o rd  
.
beside the selected rating and all  
“higher” ratings, indicating that the  
programs that match the ratings will be  
blocked.  
1 Select “Parental Control” from the Set Up  
menu. (see page 30)  
Canadian English Rating  
S e t U p  
P a r e n t a l C o n t r o l  
E n g l i s h R a t i n g  
C a p t i o n V
N o  
_
_
_
_
_
_
P a s s w o r d  
C
C8+  
G
PG  
14+  
18+  
_
_
_
_
L a n g u a g e
V i d e o L a b e l  
F l a s h F o c u s :  
E n g l i s h R a t i n g  
ch  
_
C
_
C8+  
_
G
PG  
14+  
18+  
S e l e c t r a t i n g  
Move Select  
MENU  
Move  
Select  
Exit  
MENU  
Exit  
2 Enter your four digit password using the  
0–9 buttons.  
S e l e c t r a t i n g  
Move Select  
MENU  
Exit  
Canadian French Rating U.S. TV Rating  
The Parental Control menu appears.  
F r e n c h R a t i n g  
U . S . A . R a t i n g  
_
_
_
_
_
G
_
_
_
_
_
_
TV–Y  
TV–Y7  
TV–G  
TV–PG  
TV–14  
TV–MA  
P a r e n t a l C o n t r o l  
Some U.S. TV ratings have additional  
content ratings called “extenders,” such  
as D, FV, L, S and V. By setting the  
8 ans+  
13 ans+  
16 ans+  
18 ans+  
:FV _  
C o u n t r y :  
P a r e n t a l L o c k :  
R a t i n g : C h i l d  
C h a n g e P a s s w o r d  
U . S . A .  
On  
:D _ L _ S _ V _  
:D _ L _ S _ V _  
:
L _ S _ V _  
extenders, see steps 7 to 10 of “Selecting a  
Custom Rating in U.S.A.” on pages 35  
and 36. For more details of extenders, see  
page 41.  
S e l e c t r a t i n g  
Move Select  
S e l e c t r a t i n g  
Move Select  
MENU  
MENU  
Exit  
Exit  
MENU  
Move  
Select  
Exit  
3 Press V or v to select “Change Password,”  
and press  
6 Press V or v to select the TV rating to be  
blocked, and press  
All of the extenders included in the  
selected ratings will be blocked. If you  
wish to allow any of them to be viewed,  
go to step 8.  
.
.
Example: Canadian English Rating  
P a r e n t a l C o n t r o l  
C o u n t r y :  
E n g l i s h R a t i n g  
U . S . A  
P a r e n t a l L o c k : O n  
_
_
_
_
C
C8+  
G
PG  
14+  
18+  
R a t i n g :  
C h i l d  
C h a n g e P a s s w o r d  
N e w  
8 Press MENU to exit the menu.  
_ _ _ _  
U s e [ 0 - 9 ] t o e n t e r  
n e w f o u r d i g i t  
p a s s w o r d  
_
A l l o w r a t i n g  
Move Select  
MENU  
Move  
Exit  
MENU  
Exit  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4 Enter a new four digit password using  
the 0–9 buttons.  
If yo u h a ve fo rg o t t e n yo u r p a ssw o rd  
Wh a t t h e Ra t in g s Me a n  
In step 2 of “Changing the Password” on  
page 38, enter the master password “4357”  
(corresponding to “HELP” on a phone  
number pad). You can then store a new  
password.  
P a r e n t a l C o n t r o l  
C o u n t r y :  
P a r e n t a l L o c k : O n  
R a t i n g :  
C h a n g e P a s s w o r d  
C o n f i r m  
_ _ _ _  
U . S . A  
Ra t in g s in U.S.A.  
C h i l d  
So n y’s p re d e t e rm in e d ra t in g s  
These are original ratings that Sony  
predetermined according to the viewers age.  
Each rating allows you to view the certain  
programs, as follows.  
C o n f i r m p a s s w o r d  
MENU  
Move  
Exit  
No t e s:  
If you entered “4357” as your password  
the first time, you cannot store a new  
password. (see step 2 of “Activating the  
Parental Control Feature” on page 32)  
5 Enter the password set in step 4 again to  
confirm.  
See pages 40 and 41 for a description of each  
rating.  
If you entered it incorrectly, “Password  
incorrect” appears.  
Child: Suitable for children under the age of  
When you select a Parental Control  
6.  
program and the  
indicator is  
Re-enter the correct password.  
Viewable U.S. movie ratings: G, NR, and N/ A  
Viewable U.S. TV ratings: TV-Y, TV-G, and  
TV-NR  
displayed on the screen, you cannot view  
that program even if you enter “4357.”  
(see “To unlock the Parental Control  
feature temporarily” on page 34)  
6 Press MENU to exit the menu.  
Youth: Suitable for children aged 7 and  
older.  
Viewable U.S. movie ratings: G, PG, NR, and  
N/ A  
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-  
G, TV-PG, and TV-NR  
Young Adult: Suitable for children aged 13  
and older.  
Viewable U.S. movie ratings: G, PG, PG-13,  
NR, and N/ A  
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-  
G, TV-PG, TV-14, and TV-NR  
(continued)  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
TV-Y7 (Directed to Older Children): This  
program is designed for children aged 7 and  
above. Themes and elements in this program  
may include mild fantasy violence or  
slapstick violence, or may frighten children  
under the age of 7.  
U.S. m o vie ra t in g s  
NC-17 or X (No One 17 Or Under  
Admitted.): This is a film that most parents  
would consider not suitable for children  
aged 17 and under. There may be violence,  
sex, abberrational behavior, drug abuse or  
other elements of concern.  
U.S. movie ratings are for movies (including  
those shown on TV) rated according to the  
Motion Picture Association of America  
(MPAA) Guidelines.  
G (General Audiences—All Ages  
Admitted): In G-rated films no strong words  
are used, the violence is at a minimum,  
nudity and sex scenes are not present, nor is  
there any drug use.  
TV-G (General Audience): Most parents  
would find this program suitable for all ages.  
It contains little or no violence, no strong  
language and little or no sexual dialog or  
situations.  
NR (Not Rated): This is a film that a  
producer has not rated, intending to have his  
film widely released.  
N/A (Not Applicable): This is a film that a  
producer considers outside the scope of the  
MPAA ratings.  
PG (Parental Guidance Suggested. Some  
Material May Not Be Suitable For  
Children): This is a film which may need to  
be monitored first by parents.  
TV-PG (Parental Guidance Suggested):  
This program contains some material that  
parents may find unsuitable for younger  
children.  
No t e :  
NR and N/ A ratings are shown together  
as “Unrated” in the menu.  
PG-13 (Parents Strongly Cautioned. Some  
Material May Be Inappropriate For  
Children Under 13): Parents are alerted to be  
very careful about the attendance of their  
under-teenage children when viewing.  
TV-14 (Parents Strongly Cautioned): This  
program contains some material that many  
parents would find unsuitable for children  
under the age of 14.  
U.S. TV ra t in g s  
U.S. TV ratings are for TV programs rated  
according to the U.S. Television Parental  
Guidelines.  
TV-MA (Mature Audience Only): This  
program is specifically designed to be  
viewed by adults and therefore may be  
unsuitable for children under the age of 17.  
R (Restricted, Under 17 Require  
Accompanying Parent Or Adult Guardian):  
This film includes hard language, tough  
violence, nudity, drug abuse or other  
elements of concern.  
TV-Y (All Children): This program is  
designed for young children aged 2–6 and is  
appropriate for all children.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Young Adult: Suitable for children aged 14  
and older.  
Viewable Canadian English Language  
ratings: C, G, C8+, PG and 14+  
Viewable Canadian French Language  
ratings: G, 8 ans+, 13 ans+  
TV-NR (Not Rated/Unrated): This is a  
program broadcast without any rating, such  
as news, news flashes or sports.  
Ra t in g s in Ca n a d a  
So n y’s p re d e t e rm in e d ra t in g s  
No t e :  
These are original ratings that Sony  
predetermined according to the viewers age.  
Each rating allows you to view the certain  
programs, as follows.  
The TV-NR rating is shown as “Unrated” in  
the menu.  
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-  
G, TV-PG, TV-14, and TV-NR  
See the right column and page 42 for a  
description of each rating.  
Ab o u t t h e e xt e n d e rs o f U.S. TV ra t in g s  
Ca n a d ia n En g lish La n g u a g e ra t in g s  
TV-Y7, TV-PG, TV-14 and TV-MA ratings  
have additional content ratings called  
“extenders” to define additional viewing  
limits. The extenders are defined as follows:  
Child: Suitable for children under the age of  
The Canadian English Language Ratings are  
for TV programs in English broadcast in  
Canada.  
7.  
Viewable Canadian English Language  
ratings: C and G  
D (sexually suggestive Dialog): Programs  
containing suggestive dialog, or sexual  
innuendo  
Viewable Canadian French Language  
ratings: G  
Viewable U.S. TV ratings: TV-Y, TV-G, and  
C (Programming intended for children  
under age 8): There will be no realistic  
scenes of violence or no offensive language,  
nudity or sexual content. Careful attention is  
paid to themes, which could threaten  
TV-NR  
FV (Fantasy Violence): Programs containing  
cartoon violence occurring in TV-Y7  
programs only  
Youth: Suitable for children aged 8 and  
older.  
childrens sense of security and well-being.  
Viewable Canadian English Language  
ratings: C, G, C8+ and PG  
Viewable Canadian French Language  
ratings: G and 8 ans+  
Viewable U.S. TV ratings: TV-Y, TV-Y7, TV-  
G, TV-PG, and TV-NR  
C8+ (Programming generally considered  
acceptable for children 8 years and over to  
watch on their own): Violence will not be  
portrayed as the preferred, acceptable, or  
only way to resolve conflict; or encourage  
children to imitate dangerous acts which  
they may see on television. There will be no  
profanity, nudity or sexual content.  
L (coarse Language): Programs containing  
coarse language  
S (Sexual situations): Programs containing  
sexual content  
V (Violence): Programs containing violence  
There may be some profanity, violence or  
brief nudity in these programs.  
(continued)  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting Your SET UP (menus) (continued)  
No t e :  
G (General Audience): Will contain very  
little violence, either physical or verbal or  
emotional. There may by some inoffensive  
slang, no profanity and no nudity.  
16 ans+ (Programming is not suitable for  
children under the age of 16): Contains  
frequent scenes of violence or intense  
violence.  
The E (Exempt) rating is not shown in the  
menu.  
PG (Parental Guidance): Programming  
intended for a general audience but which  
may not be suitable for younger children.  
Parents may consider some content  
inappropriate for unsupervised viewing by  
children aged 8 - 13.  
18 ans+ (Programming restricted to adults):  
Contains constant violence or scenes of  
extreme violence.  
Ca n a d ia n Fre n ch La n g u a g e ra t in g s  
The Canadian French Language Ratings are  
for TV programs in French broadcast in  
Canada.  
E (Exempt): Exempt programming.  
No t e :  
G (General): Programming intended for  
audience of all ages. Contains no violence, or  
the violence it contains is minimal or is  
depicted appropriately with humor or  
caricature or in an unrealistic manner.  
The E (Exempt) rating is not shown in the  
menu.  
14+ (Programming contains themes or  
content which may not be suitable for  
viewers under the age of 14): Parents are  
strongly cautioned to exercise discretion in  
permitting viewing by pre-teens and early  
teens.  
8 ans+ (8+ General - Not recommended for  
young children): Programming intended for  
a broad audience but contains light or  
occasional violence that could disturb young  
children. Viewing with an adult is  
recommended for young children (under the  
age of 8).  
18+ (Adult): May contain violence integral  
to the development of the plot, character or  
theme, intended for adult audiences. May  
contain graphic language and explicit  
portrayals of nudity and/ or sex.  
13 ans+ (Programming may not suitable for  
children under the age of 13): Viewing with  
an adult is strongly recommended for  
children under 13.  
E (Exempt): Exempt programming includes:  
news, sports documentaries and other  
information programming: talk shows,  
music videos, and variety programming.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Video Equipment  
Minolta  
305, 304  
323, 324, 325, 326  
325, 338, 321  
314, 336, 337  
309, 308  
VCR m a n u fa ct u re r co d e n u m b e rs  
Se t t in g t h e Ma n u fa ct u re r' s  
Co d e  
Mitsubishi/MGA  
Multitech  
NEC  
Olympic  
Optimus  
Panasonic  
Pentax  
Philco  
Philips  
Pioneer  
Quasar  
Ma n u fa ct u re r  
Co d e  
Sony (VHS VCR)  
Sony (8mm VCR)  
Sony (Beta, ED Beta, VCRs)  
Aiwa  
301  
302  
303  
You can use the supplied remote control to  
operate Sony or non-Sony video equipment  
that has an infrared sensor.  
327  
308, 309, 306, 307  
305, 304  
338  
Admiral (M. Ward)  
Audio Dynamic  
Bell & Howell (M. Ward)  
Broksonic  
Canon  
Citizen  
327  
314, 337  
330  
319, 317  
309, 308  
332  
308, 309  
308, 309, 310  
308  
Press CODE SET, DVD/ VTR (FUNCTION),  
and the 0-9 buttons to enter the  
manufacturers code number (see the  
following chart), then press ENTER.  
308, 309, 306  
304, 305, 308, 309, 311,  
329, 312, 313, 310  
309, 330, 328, 335, 324, 338  
314  
RCA/PROSCAN  
Craig  
Curtis Mathis  
Daewoo  
DBX  
Dimensia  
302, 332  
304, 338, 309  
341, 312, 309  
314, 336, 337  
304  
For example, to operate a Sony 8mm VCR:  
Realistic  
Sansui  
Samsung  
Sanyo  
Scott  
Sharp  
Signature 2000 (M. Ward)  
Sylvania  
Symphonic  
SV2000  
Tashiro  
Tatung  
Teac  
Technics  
Teknica  
Toshiba  
Wards  
FUNCTION  
DVD/VTR  
ENTER  
CODE SET  
322, 313, 321  
330, 335  
312, 313, 321, 335, 323, 324, 325, 326  
327, 328  
3
0
2
Emerson  
Fisher  
319, 320, 316, 317, 318, 341  
330, 335  
If t h e re m o t e co n t ro l d o e sn t w o rk  
See the tips on page 45.  
338, 327  
308, 309, 338, 310  
Funai  
338  
General Electric  
Go Video  
Goldstar  
Hitachi  
Instant Replay  
JC Penney  
JVC  
Kenwood  
LXI (Sears)  
Magnavox  
Marantz  
329, 304, 309  
340, 339, 322  
332  
338  
338  
332  
306, 304, 305, 338  
309, 308  
314, 336, 337  
314, 336, 338, 337  
309, 308  
309, 305, 304, 330, 314, 336, 337  
314, 336, 337  
314, 336, 332, 337  
332, 305, 330, 335, 338  
308, 309, 310  
314, 336, 337  
332  
338  
312, 311  
327, 328, 335, 331, 332  
330, 314, 336, 337  
331  
Yamaha  
Zenith  
Marta  
Memorex  
309, 335  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Video Equipment (continued)  
MDP m a n u fa ct u re r co d e n u m b e rs  
To search the picture Press ) or 0 during  
forward or backward playback. Release to resume  
normal playback.  
Operating a VCR using the remote control  
Press DVD/VTR (POWER).  
[Green Button]  
Ma n u fa ct u re r  
Co d e  
To turn On/Off  
Sony  
Panasonic  
Mistubishi  
701  
704, 710  
702  
To search a chapter Press CH +/–.  
forward or backward  
To select a channel  
To change channels  
To record  
Press the 0 – 9 buttons.  
Press CH +/–.  
Press ( while pressing r.  
Press (.  
Operating a DVD Player using the remote  
control  
DVD Pla ye r m a n u fa ct u re r co d e  
n u m b e rs  
To play  
To stop  
Press p.  
To turn On/Off  
Press DVD/VTR (POWER).  
[Green Button]  
To fast forward  
To rewind the tape  
To pause  
Press ).  
Ma n u fa ct u re r  
Co d e  
Press 0.  
Sony  
751  
753  
752  
755  
754  
To play  
To stop  
To pause  
Press (.  
Press P. Press again to  
Panasonic  
Pioneer  
RCA  
Press p.  
resume normal playback.  
Press P. Press again to  
Press ) or 0 during  
playback. Release to  
resume normal playback.  
To search the  
picture forward or  
backward  
resume normal playback.  
Toshiba  
To step through  
different tracks of  
an audio disc  
Press ) to step forward or  
0 to step backward.  
Tips z  
To change input  
mode  
Press TV/VTR.  
In some rare cases, you may not be able to operate  
To step through  
different chapters  
of a video disc  
Press CH + to step forward  
or CH – to step backward.  
your non-Sony video equipment with the supplied  
remote control. In this case, please use the  
equipment' s own remote control.  
Operating an MDP using the remote  
control  
When you remove the batteries, the code number may  
revert to the factory setting.  
To select tracks  
directly  
Press 0-9 buttons.  
Press MENU.  
To turn On/Off  
Press DVD/VTR (POWER).  
[Green Button]  
To display the  
menu (Set up)  
To o p e ra t e vid e o e q u ip m e n t  
1 Press DVD/ VTR (FUNCTION).  
To play  
To stop  
To pause  
Press (.  
2 Use the VCR/ DVD/ MDP operation  
Press p.  
buttons indicated in the following tables.  
Press P. Press again to  
resume normal playback.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating a Cable Box or Satellite Receiver (SAT)  
Ma n u fa ct u re r co d e n u m b e rs  
(sa t e llit e re ce ive r)  
To o p e ra t e t h e p ro je ct io n TV  
Se t t in g t h e Ma n u fa ct u re r' s  
Co d e  
Press TV (FUNCTION). Then use the  
projection TV control buttons to control the  
projection TV.  
Ma n u fa ct u re r  
Co d e n u m b e r  
You can program the supplied remote control  
to operate a cable box or satellite receiver.  
Sony  
801 (preset code for  
remote control)  
802, 808  
805  
Press CODE SET, SAT/ CABLE  
General Electric  
Hitachi  
Tips z  
(FUNCTION), and the 0-9 buttons to enter  
the manufacturers code number (see the  
following chart), then press ENTER.  
If more than one code number is listed, try entering  
them one by one until you come to the correct code  
for your equipment.  
Hughes  
804  
803  
802  
Panasonic  
RCA/PROSCAN  
Toshiba  
For example,to operate a Sony satellite receiver:  
If you enter a new code number, the code number  
you previously entered at that setting is erased.  
806, 807  
FUNCTION  
SAT/CABLE  
ENTER  
CODE SET  
8
0
1
To o p e ra t e t h e ca b le b o x o r  
sa t e llit e re ce ive r (SAT)  
In some rare cases, you may not be able to operate  
your equipment with the supplied remote control. In  
this case, use the equipment’s own remote control  
unit.  
Ma n u fa ct u re r co d e n u m b e rs  
(ca b le b o x)  
1 Press SAT/ CABLE (POWER) [Green  
Button] to turn on/ off the cable box or  
satellite receiver.  
Whenever you remove the batteries — to replace  
them, for example — if too much time is taken, the  
code numbers may revert to the factory setting and  
must be reset.  
Co d e  
Ma n u fa ct u re r  
2 Press SAT/ CABLE (FUNCTION).  
3 For other operations, refer to the  
operating instructions that come with the  
equipment.  
222, 223, 224, 225, 226  
201, 202, 203, 204, 205,  
222, 206, 207, 208, 218  
227, 228, 229  
Hamlin/Regal  
Jerrold/G.I  
Oak  
219, 220, 221  
Panasonic  
Pioneer  
The GUIDE and INDEX (blue-labeled)  
buttons can be used only with a satellite  
receiver.  
214, 215  
209, 210, 211  
Scientific Atlanta  
Tocom  
216, 217  
212, 213  
Zenith  
If t h e re m o t e co n t ro l d o e sn t w o rk  
Try repeating the set up procedures using  
the other codes listed for your equipment.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If, after reading the following instructions, you have additional questions related to the use of your Sony projection TV, please call one of the following  
numbers (English only).  
Customers in the continental United States contact the Direct Response Center at: 1-800-222-SONY (7669)  
Customers in Canada contact the Customer Relations Center at: (416) 499-SONY (7669)  
The picture turns off and the  
TIMER/STAND BY indicator on the  
The projection TV is equipped with a self-diagnosis function. If there is a problem with your projection TV, the TIMER/STAND BY indicator on the front  
panel will flash repeatedly. Counting the number of flashes helps you inform qualified Sony personnel of the projection TV’s condition.  
front panel flashes (self-diagnosis Press POWER on the projection TV to turn it off, then inform qualified Sony personnel or the above Direct Response Center of the number of flashes.  
function)  
No picture (screen not lit), no  
sound  
• Make sure the power cord is plugged in.  
Operate with the buttons on both the projection TV and the remote control.  
Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV, and when watching video tapes, set to VIDEO 1, 2, or 3.  
Try another channel. It could be station trouble.  
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see To perform AUTO SET UP again” on page 15)  
The Parental Control feature is activated. (see To deactivate the Parental Control feature” on page 33)  
Remote control does not  
operate  
Batteries could be weak. Replace the batteries.  
Press TV (FUNCTION) when operating your projection TV.  
• Make sure the projection TV’s power cord is connected securely to the wall outlet.  
• Locate the projection TV at least 3-4 feet away from fluorescent lights.  
Check the polarity of the batteries.  
Dark, poor or no picture  
(screen lit), good sound  
Adjust Picture” in the Video menu. (see Picture Adjustment” on page 22)  
Adjust Brightness” in the Video menu. (see Picture Adjustment” on page 22)  
Check antenna/cable connections.  
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see To perform AUTO SET UP again” on page 15)  
Adjust the convergence again using the FLASH FOCUS button. (see Adjusting the Convergence Automatically (FLASH FOCUS)” on page 15)  
Good picture, no sound  
Press MUTING so that Muting” disappears from the screen. (see MUTING” on page 16)  
Check the MTS/SAP setting in the Audio menu. (see MTS/SAP” on page 23)  
• Make sure Speaker is set to “On” in the Audio menu. (see Speaker” on page 24)  
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see To perform AUTO SET UP again” on page 15)  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cannot receive upper channels  
(UHF) when using an antenna  
• Make sure Cable is “Off” in the Channel Set Up menu. (see Cable” on page 27)  
Use Auto Program” to add receivable channels that are not presently in the TV’s memory. (see Auto Program” on page 27)  
No color  
Adjust Color” in the Video menu. (see Picture Adjustment” on page 22)  
Black and white programs cannot be seen in color.  
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see To perform AUTO SET UP again” on page 15)  
Only snow and noise appear on  
the screen  
Check the Cable setting in the Channel Set Up menu. (see Cable” on page 27)  
Check the antenna/cable connections.  
• Make sure the channel is broadcasting programs.  
Press ANT to change the input mode. (see ANT” on page 18)  
Dotted lines or stripes  
Adjust the antenna.  
Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.  
TV is fixed to one channel  
Double images or ghosts  
Cannot operate the menu  
Use Auto Program” to add receivable channels that are not presently in TV’s memory. (see Auto Program” on page 27)  
Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).  
• If the item you want to choose appears in gray, you cannot select it.  
Press the projection TV’s power button off and on again.  
Cannot receive any channels  
when using cable TV  
• Make sure Cable is “On” in the Channel Set Up menu. (see Cable” on page 27)  
Use Auto Program” to add receivable channels that are not presently in the TV’s memory. (see Auto Program” on page 27)  
Cannot gain enough volume when • Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TV’s volume.  
using a cable box  
Favorite Channel does not display Verify that Favorite Channel” is set to Manual” in the Channel Set Up menu. (see Setting Favorite Channel manually” on page 28)  
your choices  
Some video sources do not  
Ensure that Video Label” is not set to Skip.” (see Video Label” on page 31)  
appear when you press TV/VIDEO  
Recording through MONITOR OUT • MONITOR OUT will not record both images in PIP. Only the main picture will be recorded.  
does not function properly when  
recording in PIP mode  
• If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound  
from the other program.  
Cannot play shooting games  
Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For  
details, see the instruction manual supplied with the video game software.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
VIDEO 3 IN  
Pro je ct io n syst e m  
Dim e n sio n s (W/H/D)  
5
1
S VIDEO IN (4-pin mini DIN):  
Y: 1 Vp-p, 75-ohms unbalanced, sync negative  
C: 0.286 Vp-p (Burst signal), 75 ohms  
VIDEO (phono jack): 1 Vp-p, 75-ohms  
unbalanced, sync negative  
Y: 1 Vp-p, 75 ohms, sync negative  
PB: 0.7 Vp-p, 75 ohms  
PR: 0.7 Vp-p, 75 ohms  
AUDIO (phono jacks): 500 mVrms (100%  
modulation), Impedance: 47 kilohms  
MONITOR OUT  
VIDEO (phono jack): 1 Vp-p, 75-ohms  
unbalanced, sync negative  
AUDIO (phono jacks): 500 mVrms (100%  
modulation), Impedance: 470 ohms  
AUDIO (VAR/FIX) OUT (phono jacks): 500 mVrms  
(100% modulation), Impedance: 470 ohms  
CONTROL S OUT: minijack  
3 picture tubes, 3 lenses, horizontal in-line  
system  
Pict u re t u b e  
7-inch high-brightness monochrome tubes (6.3  
raster size), with optical coupling and liquid  
cooling system  
Pro je ct io n le n se s  
High performance, large diameter hybrid lens  
F1.05  
Te le visio n syst e m  
American TV standard  
Ch a n n e l co ve ra g e  
VHF: 2–13/ UHF: 14 –69/ CATV: 1 – 125  
An t e n n a  
75 ohm external terminal for VHF/ UHF  
Scre e n size (m e a su re d d ia g o n a lly)  
43 inches (KP-43T70)  
965 × 1,058 × 510 mm (38 × 41 / 8 × 20 / 8 inches)  
(KP-43T70)  
7
5
1
1,064 × 1,310 × 572 mm (41 / 8 × 51 / 8 × 22 / 2  
inches) (KP-46C70)  
1
5
3
1,105 × 1,338 × 579 mm (43 / 2 × 52 / 8 × 22 / 4  
inches) (KP-48S70)  
1
5
3
1,105 × 1,338 × 579 mm (43 / 2 × 52 / 8 × 22 / 4  
inches) (KP-48S72)  
7
3
7
1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8  
inches) (KP-53S70)  
7
3
7
1,216 × 1,417 × 632 mm (47 / 8 × 55 / 4 × 24 / 8  
inches) (KP-53N74)  
3
3
1,370 × 1,560 × 670 mm (54 × 61 / 8 × 26 / 8  
inches) (KP-61S70)  
Ma ss  
64.6 kg (142 lbs 7 oz) (KP-43T70)  
61.6 kg (135 lbs 13 oz) (KP-46C70)  
64 kg (141 lbs 2 oz) (KP-48S70)  
67 kg (147 lbs 11 oz) (KP-48S72)  
67.6 kg (149 lbs) (KP-53S70)  
75.2 kg (165 lbs 13 oz) (KP-53N74)  
84.6 kg (186 lbs 8 oz) (KP-61S70)  
Su p p lie d a cce sso rie s  
46 inches (KP-46C70)  
Sp e a ke r  
For KP-53N74  
Tweeter: 66 mm (2 / 8”) × 2  
Woofer: 130 mm (5 / 8”) × 2  
48 inches (KP-48S70/ 48S72)  
53 inches (KP-53S70/ 53N74)  
61 inches (KP-61S70)  
In p u t s/o u t p u t s  
VIDEO 1 IN  
5
1
For KP-43T70/46C70/48S70/48S72/53S70/61S70  
Woofer: 100 mm (4”) × 2  
Sp e a ke r o u t p u t  
15W × 2 (KP-43T70/ 46C70/ 48S70/ 48S72/ 53S70/  
61S70)  
20 W × 2 (KP-53N74)  
Po w e r re q u ire m e n t  
120 V AC, 60 Hz  
VIDEO 2 INPUT  
Remote control RM-Y906 (1)  
Batteries (2) size AA (R6)  
Op t io n a l a cce sso rie s  
S VIDEO IN (4-pin mini DIN):  
Y: 1 Vp-p, 75-ohms unbalanced, sync negative  
C: 0.286 Vp-p (Burst signal), 75 ohms  
VIDEO (phono jack): 1 Vp-p, 75-ohms  
unbalanced, sync negative  
AUDIO (phono jacks): 500 mVrms (100%  
modulation), Impedance: 47 kilohms  
Connecting cables  
RK-G34, RK-74A, RK-G69HG, VMC-10HG,  
VMC-720M, VMC-810S/ 820S, YC-15V/ 30V  
U/ V mixer EAC-66  
Po w e r co n su m p t io n  
In use (Max.): 160 W  
In standby: 1 W  
Design and specifications are subject to change  
without notice.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Channel Set Up menu operations  
.................................................. 26, 27  
Channel Skip/ Add ........................... 27  
Coaxial cable ............................ 4, 5, 6, 8  
Color ................................................... 22  
Connecting Projection TV to  
antenna ............................................ 4  
audio system ................................ 12  
cable ................................................. 4  
cable box .......................................... 5  
cable box and VCR ........................ 6  
camcorder ....................................... 9  
DTV receiver ................................... 9  
DVD Player ................................... 11  
satellite receiver (SAT) .................. 7  
satellite receiver (SAT) and  
Mode ............................................. 16, 22  
(Vivid/ Standard/ Movie/  
Personal 1/ Personal 2)  
Movie rating ...................................... 36  
MTS/ SAP ..................................... 18, 23  
(Stereo/ SAP/ Mono/ Auto SAP)  
MUTING button ............................... 16  
A
E
Adjusting sliders ......................... 22, 23  
ANT button ................................. 18, 20  
Antenna cable ...................................... 5  
Antenna connector ............................. 4  
Editing using MONITOR OUT....... 10  
Effect ................................................... 23  
(BBE/ Surround/ Simulated/ Off )  
F, G  
Audio  
button ............................... 18  
Factory settings ........................... 22, 23  
Favorite Channel  
Selecting ........................................ 29  
Setting ............................................ 28  
FLASH FOCUS ........................... 15, 31  
FREEZE button ........................... 17, 20  
Audio menu operations ........ 23, 24  
Audio Out .......................................... 24  
(Fixed/ Variable)  
Audio/ Video cable ............................. 4  
Auto Program ............................. 15, 27  
AUTO SET UP ................................... 14  
Auto Volume ..................................... 23  
AUX Hookup ................................ 5, 20  
N
Noise Reduction ................................ 22  
O
On/ Off Timer .................................... 25  
Operating video equipment ............ 43  
H, I  
Hook Ups ............................................. 4  
Hue ..................................................... 22  
P, Q  
Parental Control .......................... 30, 32  
Parental Control menu  
B
J, K  
Balance ............................................... 23  
Bass ..................................................... 23  
Battery installation ........................... 14  
Brightness .......................................... 22  
VCR................................................ 8  
Sony SAVA series speaker  
Change Password ........................ 38  
Country ......................................... 32  
Custom Rating ....................... 34, 37  
Parental Lock .......................... 32, 33  
Rating ............................................ 33  
Password ............................................ 32  
Picture ................................................ 22  
Picture Adjustment .......................... 22  
(Picture/ Brightness/ Color/ Hue/  
Sharpness)  
Picture-in-Picture (PIP) .................... 19  
PICTURE MODE button .................. 16  
PIP operations  
ACTIVE B/ b ................................ 19  
AUDIO .......................................... 20  
JUMP button ...................................... 17  
L
system .......................................... 13  
two VCRs ...................................... 10  
VCR .................................................. 6  
CONTROL S OUT jack ...................... 4  
Convergence ...................................... 15  
Current Time ..................................... 25  
Language ........................................... 30  
Learning menus  
C
Audio ............................................. 23  
Channel Set Up ............................ 26  
Set Up ............................................ 30  
Timer ............................................. 25  
Video ............................................. 22  
Cable ................................................... 27  
Cable box  
connection ................................... 5, 6  
operation ....................................... 45  
Caption Vision CC ..................... 18, 30  
CATV cable .......................................... 5  
CH +/ – ......................................... 16, 20  
CHANNEL +/ – .......................... 14, 15  
Channel Caption ............................... 26  
D
Daylight Savings ............................... 25  
DISPLAY button ............................... 17  
DVD  
connection ..................................... 11  
operation ....................................... 44  
DVD/ VTR (FUNCTION) ................ 44  
M
Manufacturer code numbers ...... 43-45  
MDP operation .................................. 44  
MENU button .................................... 21  
Menu selection .................................. 21  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index (continued)  
CH+/ – ........................................... 20 Sharpness ........................................... 22  
FREEZE ......................................... 20 Skip/ Add ........................................... 27  
PIP .................................................. 19 SLEEP button .................................... 18  
POSITION ..................................... 19 Sliders ........................................... 22, 23  
SWAP ............................................ 20 Speaker ............................................... 24  
V, W  
VCR  
connection ............................. 6, 8, 10  
operation ....................................... 44  
Video Label ........................................ 31  
TV/ VIDEO ................................... 19  
(On/ Off/ SAVA SP)  
Video menu operations  
.............. 22  
Specifications ..................................... 48  
Splitter .................................................. 6  
SYSTEM OFF button ........................ 18  
Surround ............................................ 23  
SWAP button ..................................... 20  
VOL +/ – ............................................. 16  
VOLUME +/ – ............................. 14, 15  
R
Remote control .................................. 14  
Graphic Illustration ... (inside cover)  
RESET button .............................. 22, 23  
X
XDS ..................................................... 18  
S
Y, Z  
T, U  
S Video cable ....................................... 4  
Safety .................................................... 2  
SAP ..................................................... 23  
SAT/ CABLE (FUNCTION) ............ 45  
Satellite receiver (SAT) operation ... 45  
SET UP button ................................... 14  
Y/ PB/ PR ......................................... 9, 11  
Timer menu operations  
............. 25  
Treble .................................................. 23  
Troubleshooting .......................... 46, 47  
TV (FUNCTION) button .................. 16  
TV POWER button ........................... 16  
TV rating ............................................ 35  
TV/ VIDEO button ...................... 17, 19  
TV/ VTR button ................................ 18  
Set Up menu operations  
Setting Up the Projection TV  
....... 30, 31  
Automatically ............................... 14  
If, after reading this instruction manual, you  
have additional questions related to the use of  
your Sony projection TV, please call one of the  
following numbers (English only).  
Customers in the continental United States  
contact the Direct Response Center at:  
1-800-222-SONY (7669)  
Customers in Canada contact the  
Customer Relations Center at:  
(416) 499-SONY (7669)  
Printed in U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Telephone MM 60 iPhone User Manual
Sony Clock Radio ICF CD863 User Manual
Sony Ericsson Cell Phone W660I User Manual
Sony Flat Panel Television TH 50PZ750U User Manual
Sony Security Camera CD 9255 User Manual
Star Manufacturing Popcorn Poppers 39 A User Manual
Stow Marine Safety Devices SCT36 User Manual
StreamLight Stereo System MS2015 User Manual
Swann Webcam Net Mate User Manual
Sylvania CRT Television SST4273 User Manual