Sony Printer MFC 240C User Manual

MFC-240C  
Before you can use the machine, you must set up the hardware and install the software.  
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.  
STEP 1  
STEP 2  
Setup is Complete!  
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for  
quick and easy reference at all times.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
®
Windows  
For USB Interface Users  
®
Macintosh  
For USB Interface Users  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
1
Carton components  
Carton components may vary from one country to another.  
Save all packing materials and the carton in case for any reason you must ship your machine.  
Quick Setup Guide  
CD-ROM  
User’s Guide  
Telephone Line Cord Adapter  
Telephone Line Cord  
Power Cord  
(For Australia only)  
Black (LC57BK)  
Yellow (LC57Y)  
Cyan (LC57C)  
Magenta (LC57M)  
Ink Cartridges  
A USB interface cable is not a standard accessory.  
Australia & New Zealand users:  
Hong Kong, Malaysia & Singapore users:  
The mains plug supplied with this machine is a grounded three pin plug. Make sure that the AC socket will accept this  
grounded three pin plug. This machine must be grounded, If in doubt, call a qualified electrician.  
Philippines & Thailand users:  
The mains plug supplied with this machine is a side grounded two pin plug. Make sure that the AC socket  
will accept this side grounded two pin plug. This machine must be grounded, If in doubt, call a qualified  
electrician.  
To ensure safe operation the supplied plug must be inserted only into a standard power outlet that is properly  
grounded through the standard electrical wiring. Non grounded equipment may cause an electrical shock  
hazard, and may cause excessive electrical noise radiation.  
Please make sure you use a USB 2.0 cable that is no longer than 2 metres (6 feet) long.  
Your machine has a USB interface that is compatible with the USB 2.0 specification.  
DO NOT connect the interface cable at this time.  
Connecting the interface cable is done during the software installation process.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Getting Started  
Control panel  
9
10  
11  
12  
13  
14  
01/01 13:00 Fax  
8
5
6
7
3
4
2
1
1
2
3
4
5
6
7
Fax and telephone keys  
Dial Pad  
8
9
Start keys  
Stop/Exit key  
Mode keys  
10 Navigation keys  
11 Copy Options key  
12 Menu key  
Fax Resolution key  
Ink Management key  
Clear/Back key  
OK key  
13 LCD (Liquid Crystal Display)  
14 Power Save key  
For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide.  
Note  
Date  
Time  
Receive mode  
01/01 13:00 Fax  
When the machine is idle (not being used) it will return to the default display shown above. The default display  
shows the date, time, and the current receive mode.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Up the Machine  
STEP1  
1
1 Removing the protective  
2 Loading paper  
parts  
You can load up to 100 sheets of 80 gsm  
(20 lb) paper.  
For details, see Acceptable paper and other  
media in Chapter 2 of the User’s Guide.  
1
2
Remove the protective tape and film covering  
the scanner glass.  
Remove the foam bag containing the ink  
cartridges from on top of the paper tray.  
1
Pull the paper tray completely out of the  
machine and lift the output paper tray cover (1).  
Improper Setup  
DO NOT connect the USB cable. Connecting  
the USB cable is done during the software  
installation process.  
1
2
Press and slide the paper side guides (1) and  
paper length guide (2) to fit the paper size.  
1
2
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Up the Machine  
3
4
Fan the stack of paper well to avoid paper jams  
and misfeeds.  
6
Close the output paper tray cover.  
Gently put the paper into the paper tray print  
side down and top edge first.  
Check that the paper is flat in the tray.  
7
8
Slowly push the paper tray completely into the  
machine.  
5
Gently adjust the paper side guides with both  
hands to fit the paper.  
Make sure that the paper guides touch the  
edges of the paper.  
While holding the paper tray in place, pull out  
the paper support ( ) until it clicks, and then  
unfold the paper support flap ( ).  
Note  
Do not use the paper support flap for Legal size  
paper.  
Note  
Be careful that you do not push the paper in too  
far; it may lift at the back of the tray and cause  
paper feed problems.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Machine  
STEP1  
Note  
3 Connecting the phone line  
If you are sharing one phone line with an external  
telephone answering machine, connect it as  
shown below.  
1
Connect the telephone line cord. Connect one  
end of the telephone line cord to the socket on  
the machine marked LINE and the other end to  
a modular wall socket.  
Set the receive mode to ‘External TAD’ if you  
have an external answering machine. For  
details, see Connecting an external TAD  
(telephone answering device) in Chapter 7 of  
the User’s Guide.  
Improper Setup  
DO NOT connect the USB cable. Connecting  
the USB cable is done during the software  
installation process.  
4 Connecting the power cord  
Warning  
1
Connect the power cord.  
• The machine must be fitted with an earthed plug.  
• Since the machine is grounded through the power  
outlet, you can protect yourself from potentially  
hazardous electrical conditions on the telephone  
network by keeping the power cord connected to  
your machine when you connect it to a telephone  
line. Similarly, you can protect yourself when you  
want to move your machine by disconnecting the  
telephone line first and then the power cord.  
Note  
If you are sharing one phone line with an external  
telephone, connect it as shown below.  
1
2
1
2
Extension telephone  
External telephone  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting Up the Machine  
5 Set Your Country  
(For Australia / New Zealand  
Customer Only)  
6 Installing the ink cartridges  
Warning  
If ink gets in your eyes, wash them out with water  
at once, and if irritation occurs consult a doctor.  
You must set your country so that the machine works  
correctly.  
1
Make sure that the power is turned on.  
The LCD shows:  
1
Check that the power is turned on by  
connecting the power cord.  
The LCD shows:  
No Cartridge  
Set Country  
2
Open the ink cartridge cover (1).  
q
Press OK Key  
2
3
Press OK.  
The LCD shows:  
Australia  
e
q
1
Select ab & OK  
Press a or b to select the country  
(Australiaor New Zealand).  
3
Pull all the lock release levers down and  
remove the yellow protective part (1).  
4
5
Press OK when the LCD shows your country.  
The LCD prompts you to make sure of the  
country again.  
Australia?  
q
1.Yes 2.No  
6
7
Press 1 to go to step 7.  
---OR---  
Press 2 to go back to step 1 to select the  
country again.  
After the LCD shows Acceptedfor two  
seconds, it shows; Please Wait.  
1
Note  
Do not throw away the yellow protective part. You  
will need it if you transport the machine.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Up the Machine  
STEP1  
4
Take out the ink cartridge.  
6
Install each ink cartridge in the direction of the  
arrow on the label.  
Take care to match the colour of the lock  
release lever (1) with the cartridge colour (2),  
as shown in the diagram below.  
2
5
Carefully remove the protective yellow cap (1).  
1
1
Improper Setup  
DO NOT touch the area shown in the  
illustration below.  
brother  
XXXX  
M
7
Lift each lock release lever and push it until it  
clicks, and then close the ink cartridge cover.  
Note  
If the protective yellow cap comes off when you  
open the bag, the cartridge will not be damaged.  
Note  
If the LCD shows Install Black,  
Install Yellow, Install Cyan or  
Install Magenta after you install the ink  
cartridges, check that the ink cartridges are  
installed properly.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Machine  
The machine will clean the ink tube system for  
use for the first time. The cleaning process will  
last approximately four minutes.  
Caution  
• DO NOT take out ink cartridges if you do not  
need to replace them. If you do so, it may  
reduce the ink quantity and the machine will  
not know the quantity of ink left in the  
cartridge.  
• DO NOT shake the ink cartridges. If ink stains  
your skin or clothing, wash with soap or  
detergent at once.  
The LCD shows:  
Preparing System  
q
Approx 4 Minutes  
• DO NOT repeatedly insert and remove the  
cartridges. If you do so, ink may seep out of the  
cartridge.  
Cleaning  
q
• If you mix the colours by installing an ink  
cartridge in the wrong position, clean the print  
head several times after correcting the  
cartridge installation. (See Cleaning the print  
head in Appendix B of the User’s Guide.)  
• Once you open an ink cartridge, install it in the  
machine and use it up within six months of  
installation. Use unopened ink cartridges by  
the expiration date written on the cartridge  
package.  
Please Wait  
• DO NOT dismantle or tamper with the ink  
cartridge, this can cause the ink to leak out of  
the cartridge.  
• Brother multifunction machines are designed  
to work with ink of a particular specification  
and will work to a level of optimum  
performance when used with genuine Brother  
branded ink cartridges.  
Brother cannot guarantee this optimum  
performance if ink or ink cartridges of other  
specifications are used. Brother does not  
therefore recommend the use of cartridges  
other than genuine Brother branded cartridges  
with this machine or the refilling of empty  
cartridges with ink from other sources. If  
damage is caused to the print head or other  
parts of this machine as a result of using  
incompatible products with this machine, any  
repairs required as a result may not be covered  
by the warranty.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Machine  
STEP1  
5
Do one of the following:  
7 Print quality check  
If all lines are clear and visible, press 1  
(Yes) on the dial pad to finish the quality  
check.  
If you can see missing short lines, press 2  
(No) on the dial pad and go to step 6.  
1
After the cleaning cycle is finished, the LCD  
shows:  
OK  
Poor  
Set Paper and  
q
Press Start  
6
The LCD asks you if the print quality is OK for  
black and colour. Press 1 (Yes) or 2 (No) on the  
dial pad.  
2
3
Make sure paper is loaded in the paper tray.  
Press Colour Start.  
The machine starts printing the Print Quality  
Check Sheet (only during initial ink cartridge  
installation).  
Black OK?  
q
Check the quality of the four colour blocks on  
the sheet.  
(black/yellow/cyan/magenta)  
1.Yes 2.No  
Color OK?  
q
1.Yes 2.No  
After pressing 1 (Yes) or 2 (No) for both black  
and colour, the LCD shows:  
Start Cleaning?  
q
1.Yes 2.No  
7
8
Press 1 (Yes), the machine will then start  
cleaning the colours.  
Improper Setup  
Avoid touching the printed surface of the  
paper immediately after printing, the surface  
may not be completely dry and may stain your  
fingers.  
After cleaning is finished, press Colour Start.  
The machine starts printing the Print Quality  
Check Sheet again and goes back to step 3.  
4
The LCD shows:  
Is Quality OK?  
q
8 Choosing your language  
You can change the LCD language.  
1.Yes 2.No  
1
2
Press Menu, 0, 0.  
Press a or b to choose your language  
(Englishor Spanish).  
Press OK.  
3
Press Stop/Exit.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Up the Machine  
9 Setting the LCD contrast  
10 Setting the date and time  
You can adjust the LCD contrast for a sharper and  
more vivid display. If you are having difficulty seeing  
the LCD from your position, we recommend the  
following contrast setting for improved viewing.  
The machine displays the date and time, and if you  
set up the station ID, the date and time displayed on  
your machine will be printed on every fax you send.  
1
2
3
4
Press Menu.  
Press 0.  
1
2
3
4
Press Menu, 1, 7.  
Press a or b to choose Darkor Light.  
Press OK.  
Press 2.  
Enter the last two digits of the year on the dial  
pad, and then press OK.  
Press Stop/Exit.  
Contrast:Light  
Year:2007  
(e.g. Enter 0 7 for 2007.)  
5
6
7
8
Enter the two digits for the month on the dial  
pad, and then press OK.  
Month:03  
(e.g. Enter 0 3 for March.)  
Enter the two digits for the day on the dial pad,  
and then press OK.  
Contrast:Dark  
Day:01  
(e.g. Enter 0 1 for the first of the month.)  
Enter the time in 24-hour format on the dial  
pad, and then press OK.  
Time:15:25  
(e.g. Enter 1 5, 2 5 for 3:25 P.M.)  
Press Stop/Exit.  
To confirm the current date and time, print  
out the Users Settings Report. (See Printing  
reports in Chapter 9 of the User's Guide.)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Setting Up the Machine  
STEP1  
11 Setting your station ID  
12 Setting tone or pulse dialling  
mode (not available for New  
Zealand)  
You should store your name and fax number to be  
printed on all fax pages that you send.  
Your machine comes set for a Tone dialling service. If  
you have a Pulse dialling service (rotary), you need to  
change the dialling mode.  
1
2
3
4
Press Menu.  
Press 0.  
Press 3.  
1
2
3
4
Press Menu.  
Press 0.  
Enter your fax number (up to 20 digits) on the  
dial pad, and then press OK. To enter a “+” for  
international codes, press l . For example, to  
enter the UK dialling code “+44”, press l , 4, 4  
and then the rest of your number.  
Press 4.  
Press a or b to choose Pulse(or Tone).  
Press OK.  
Fax:+44XXXXXXXX  
5
Press Stop/Exit.  
5
Enter your name (up to 20 characters) using  
the dial pad, and then press OK.  
Name:_  
Note  
• See the following chart for entering your name.  
• If you need to enter a character that is on the same  
key as the last character, press  
cursor to the right.  
to move the  
• If you entered a letter incorrectly and want to  
change it, press or to move the cursor  
under the incorrect character, press Clear/Back.  
Press  
key  
One  
time  
Two  
times  
Three  
times  
Four  
times  
2
3
4
5
6
7
8
9
A
D
G
J
B
E
H
K
N
Q
U
X
C
F
I
2
3
4
5
6
S
8
Z
L
M
P
T
O
R
V
Y
W
6
Press Stop/Exit.  
Note  
If you make a mistake and want to start again,  
press Stop/Exit and go back to step 1.  
For details, see Entering Text in Appendix C  
of the User's Guide.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Setting Up the Machine  
Now go to  
13 Choosing a Receive Mode  
the next page to install the drivers.  
There are four possible receive modes: Fax Only,  
Fax/Tel, Manualand External TAD.  
Are you connecting an external telephone or external  
telephone answering device to the machine?  
Yes  
No  
Are you using the voice message function  
of an external telephone answering  
device?  
No  
Do you want the machine to answer  
fax and telephone calls  
automatically?  
Yes  
Do you want to use the  
machine for Fax only?  
Yes  
Fax Only  
Your machine  
automatically answers  
every call as a fax.  
No  
Fax/Tel  
Your machine controls  
the line and  
automatically answers  
every call. If the call is  
not a fax, the phone will  
ring for you to pick up  
the call.  
No  
Manual  
You control the phone  
line and must answer  
every call yourself.  
Yes  
External TAD  
Your external telephone  
answering device (TAD)  
automatically answers  
every call. Voice  
messages are stored on  
the external TAD. Fax  
messages are printed.  
1
2
3
4
5
6
Press Menu.  
Press 0.  
Press 1.  
Press a or b to choose the mode.  
Press OK.  
Press Stop/Exit.  
For details, see Receive mode Settings in  
Chapter 6 of the User's Guide.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Supplied CD-ROM ‘MFL-Pro Suite’  
1
Supplied CD-ROM ‘MFL-Pro Suite’  
Windows®  
Macintosh®  
Install MFL-Pro Suite  
Start Here OSX  
You can install the MFL-Pro Suite software and  
multifunction drivers.  
You can install the MFL-Pro Suite that includes the  
printer driver, scanner driver and the Brother  
®
ControlCenter2 for Mac OS 10.2.4 or greater.  
Install Other Drivers or Utilities  
You can install additional MFL-Pro Suite software  
Presto! PageManager  
®
utilities, install without PaperPort SE, or install the  
®
®
You can also install Presto! PageManager to add  
OCR capability to the Brother ControlCenter2 and  
easily scan, share and organize photos and  
documents.  
printer driver only.  
User’s Guide  
View the Software User’s Guide in HTML format.  
The Software User's Guide includes instructions for  
features available when connected to a computer.  
(eg. Printing and scanning details)  
Documentation  
View the Software User’s Guide in HTML format.  
The Software User's Guide includes instructions for  
features available when connected to a computer.  
(eg. Printing and scanning details)  
On-Line Registration  
You will be pointed to the Brother Product  
Registration Web page for quick registration of your  
machine.  
Brother Solutions Center  
You can access the Brother Solutions Center which is  
a Web site offering information about your Brother  
product including FAQs, User’s Guides, driver  
updates and tips for using your machine.  
Brother Solutions Center  
You can access the Brother Solutions Center which is  
a Web site offering information about your Brother  
product including FAQs, User’s Guides, driver  
updates and tips for using your machine.  
On-Line Registration  
You will be pointed to the Brother Product  
Registration Web Page for quick registration of your  
machine.  
Repair MFL-Pro Suite  
If an error occurred during the installation of the  
MFL-Pro Suite, use this selection to automatically  
repair and re-install the MFL-Pro Suite.  
Note  
MFL-Pro Suite includes the Printer Driver,  
Scanner Driver, Brother ControlCenter3,  
®
®
ScanSoft PaperPort SE with OCR and  
®
True Type fonts.  
®
PaperPort SE with OCR is a document  
management application for scanning and viewing  
documents.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the Driver & Software  
STEP2  
Follow the instructions on this page for your operating system and interface.  
For the latest drivers and documentations and to find the best solution for your problem or question, access the Brother Solutions Center  
directly from the driver or visit http://solutions.brother.com.  
Windows®  
For USB Interface Users  
Macintosh®  
For USB Interface Users  
®
®
®
The screens for Windows in this Quick Setup Guide are based on Windows XP.  
®
®
The screens for Mac OS X in this Quick Setup Guide are based on Mac OS X 10.4.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the Driver & Software  
STEP2  
®
Windows  
1
For USB Interface Users  
(For Windows® 98/98SE/Me/2000 Professional/XP/XP Professional  
x64 Edition)  
4
The CD-ROM main menu will appear. Click  
Install MFL-Pro Suite.  
Important  
Make sure that you have finished the  
instructions from Step 1 Setting Up the  
Note  
• Uninstall any other version of MFC software, any  
scanning and faxing software and any GDI printer  
drivers as they might cause conflicts with new  
software.  
• Please close any applications running before  
installing MFL-Pro Suite.  
• Make sure there are no memory cards in the  
media drive of the machine.  
Note  
• If this window does not appear, use Windows  
®
Explorer to run the setup.exe program from the  
root folder of the Brother CD-ROM.  
1
Disconnect the machine from the power socket  
and from your computer, if you already  
connected an interface cable.  
®
If you are using Windows 2000 Professional  
and have not installed service pack 3 (SP3) or  
greater:  
To access the PhotoCapture Center™ features  
from your computer you may have to install a  
®
Windows 2000 update first.  
®
The Windows 2000 update is included with the  
MFL-Pro Suite installer.  
To install the update, follow the steps below:  
®
1 Click OK to start installation of the Windows  
updates.  
2
3
Turn on your PC.  
®
(For Windows 2000 Professional/XP/  
XP Professional x64 Edition, you must be  
logged on with Administrator rights.)  
Put the supplied CD-ROM into your CD-ROM  
drive. If the model name screen appears,  
choose your machine. If the language screen  
appears, choose your language.  
2 When instructed, click OK to restart your  
computer.  
3 After the computer restarts, the installation of  
MFL-Pro Suite will automatically continue.  
If the installation does not continue automatically,  
open the main menu again by ejecting and then  
reinserting the CD-ROM disc or double-click the  
setup.exe program from the root folder, and  
continue from Step 4 to install MFL-Pro Suite.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installing the Driver & Software  
®
Windows  
®
5
After reading and accepting the ScanSoft  
10  
Using both hands, use the plastic tabs on both  
sides of the machine to lift the scanner cover  
until it locks securely into the open position.  
®
PaperPort SE License Agreement, click Yes.  
®
6
7
The installation of PaperPort SE will  
automatically start and is followed by the  
installation of MFL-Pro Suite.  
When the Brother MFL-Pro Suite Software  
License Agreement window appears, click Yes  
if you agree to the Software License  
Agreement.  
11  
Connect the USB cable to the USB socket  
marked with a symbol. You will find the  
USB socket inside the machine as shown  
below.  
8
9
Choose Standard, and then click Next. The  
installation continues.  
12  
Carefully guide the USB cable into the trench  
as shown below, following the trench around  
and toward the back of the machine and  
connect it to your computer.  
When this screen appears, go to the next step.  
Improper Setup  
• DO NOT connect the machine to a USB port on  
a keyboard or a non-powered USB hub.  
Brother recommends that you connect the  
machine directly to your computer.  
• Make sure that the cable does not restrict the  
cover from closing, or an error may occur.  
• Please make sure you use a USB 2.0 cable that  
is no longer than 2 metres long (6 feet).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Driver & Software  
STEP2  
®
Windows  
13  
Lift the scanner cover to release the lock ( ).  
Gently push the scanner cover support down  
16  
Click Finish to restart your computer.  
®
(After restarting the computer, for Windows  
2000 Professional/XP/XP Professional x64  
Edition, you must be logged on with  
Administrator rights.)  
(
) and close the scanner cover ( ).  
Note  
14  
Turn on the machine by connecting the power  
cord.  
After restarting the computer, the Installation  
Diagnostics will run automatically. If the  
installation is unsuccessful, the installation results  
window will be shown. If the Diagnostics shows a  
failure, please follow the on-screen instructions or  
read the on-line help and FAQs in  
Start/All Programs (Programs)/Brother/  
MFC-XXXX.  
The MFL-Pro Suite has been installed and  
the installation is now complete.  
The installation of the Brother drivers will  
automatically start. The installation screens  
appear one after another. Please wait, it will  
take a few seconds for all the screens to  
appear.  
Note  
MFL-Pro Suite includes the Printer Driver,  
Scanner Driver, Brother ControlCenter3,  
®
®
ScanSoft PaperPort SE with OCR and  
®
True Type fonts.  
®
PaperPort SE with OCR is a document  
management application for scanning and viewing  
documents.  
Improper Setup  
DO NOT try to cancel any of the screens during  
this installation.  
15  
When the On-Line Registration screen is  
displayed, make your selection and follow the  
on-screen instructions.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Driver & Software  
®
Macintosh  
For USB Interface Users  
(For Mac OS® X 10.2.4 or greater)  
3
Carefully guide the USB cable into the trench  
Important  
as shown below, following the trench around  
and toward the back of the machine and  
connect it to your computer.  
Make sure that you have finished the  
instructions from Step 1 Setting Up the  
Note  
®
For Mac OS X 10.2.0 to 10.2.3 users, upgrade to  
®
Mac OS X 10.2.4 or greater. (For the latest  
®
information for Mac OS X, visit  
1
2
Using both hands, use the plastic tabs on both  
sides of the machine to lift the scanner cover  
until it locks securely into the open position.  
Improper Setup  
• DO NOT connect the machine to a USB port on  
a keyboard or a non-powered USB hub.  
Brother recommends that you connect the  
machine directly to your computer.  
• Make sure that the cable does not restrict the  
cover from closing, or an error may occur.  
• Please make sure you use a USB 2.0 cable that  
is no longer than 2 metres long (6 feet).  
4
Lift the scanner cover to release the lock ( ).  
Gently push the scanner cover support down  
(
) and close the scanner cover ( ).  
Connect the USB cable to the USB socket  
marked with a  
symbol. You will find the  
USB socket inside the machine as shown  
below.  
Note  
Make sure that the machine is turned on by  
connecting the power cord.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Installing the Driver & Software  
STEP2  
®
Macintosh  
®
®
5
6
Turn on your Macintosh .  
10  
For Mac OS X 10.2.4 to 10.2.8 users:  
Click Add.  
Put the supplied CD-ROM into your CD-ROM  
drive.  
7
Double-click the Start Here OSX icon to install.  
Follow the on-screen instructions.  
11  
12  
Choose USB.  
Note  
Please wait, it will take a few seconds for the  
software to install. After the installation, click  
Restart to finish installing the software.  
Choose MFC-XXXX (where XXXX is your  
model name), and then click Add.  
8
9
The Brother software will search for the Brother  
device. During this time the following screen  
will appear.  
13  
Click Print Center, then Quit Print Center.  
When this screen appears, click OK.  
®
For Mac OS X 10.3.x or greater users:  
The MFL-Pro Suite, Brother printer driver,  
scanner driver and Brother  
ControlCenter2 have been installed and  
the installation is now complete.  
Go to step 14.  
The MFL-Pro Suite, Brother printer driver,  
scanner driver and Brother  
ControlCenter2 have been installed and  
the installation is now complete.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Driver & Software  
®
Macintosh  
®
®
14  
To install Presto! PageManager , click the  
Presto! PageManager icon and follow the  
on-screen instructions.  
Note  
®
®
When Presto! PageManager is installed OCR  
capability is added to the Brother ControlCenter2.  
You can easily scan, share and organize photos  
®
®
and documents using Presto! PageManager .  
®
®
Presto! PageManager has been  
installed and the installation is now  
complete.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Uninstalling the ‘MFL-Pro Suite’  
For instractions on how to uninstall the MFL Pro Suite software  
Uninstalling for Windows  
Uninstalling for Macintosh  
How to uninstall the Printer Driver:  
Improper Setup  
DO NOT remove the USB cable  
during the uninstallation process.  
1
Disconnect the USB cable between the  
Macintosh and your Brother device.  
Start/All Programs (Programs)/Brother/  
MFC-XXXX/UnInstall  
2
3
4
Reboot the Mac.  
Log on as an ”Administrator”.  
1
2
Click UnInstall.  
Run the ”Print Center” or ”Printer Setup  
Utility”  
Click OK.  
(from the Macintosh HD/Applications/  
Utilities/Print Center or Printer Setup Utility  
folder), then choose the printer you went to  
remove and remove it by clicking the ”Delete”  
button.  
5
6
7
Click on the model name of your Brother  
product in the printer list. From the Finder  
menu, delete the Printer.  
3
4
Remove the USB cable.  
Drag the ”Brother” folder (Macintosh HD/  
Library/Printers/Brother) into the Trash bin  
and then empty the trash bin.  
Click Finish.  
Reboot the Mac.  
How to uninstall the Scanner  
Driver:  
1
Disconnect the USB cable between the  
Macintosh and your Brother device.  
2
3
4
Reboot the Mac.  
Log on as an ”Administrator”.  
The MFL-Pro Suite has been uninstalled  
and the uninstallation is now  
complete.  
Delete the ”Brother TWAIN.ds” folder  
(Macintosh HD/Library/Image  
Capture/TWAIN Data Sources/Brother  
TWAIN.ds)  
The MFL-Pro Suite, Brother printer driver,  
scanner driver and Brother  
ControlCenter2 has been uninstalled and  
the uninstallation is now complete.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Consumables  
1
Replacement consumables  
When the time comes to replace ink cartridges, an error message will be indicated on the LCD. For more  
information about the ink cartridges for your machine, visit http://solutions.brother.com or contact your local  
Brother re-seller.  
Ink cartridge  
Black  
Yellow  
LC57Y  
Cyan  
Magenta  
LC57M  
LC57BK  
LC57C  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Trademarks  
The Brother logo is a registered trademark of Brother Industries, Ltd.  
Brother is a registered trademark of Brother Industries, Ltd.  
Multi-Function Link is a registered trademark of Brother International Corporation.  
Windows and Microsoft are registered trademarks of Microsoft in the U.S. and other countries.  
Macintosh and True Type are registered trademarks of Apple Computer, Inc.  
PaperPort is a registered trademark of ScanSoft, Inc.  
Presto! PageManager is a registered trademark of NewSoft Technology Corporation.  
PictBridge is a trademark.  
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its proprietary  
programs.  
All other brand and product names mentioned in this manual are trademarks or registered trademarks of their  
respective companies.  
Compilation and Publication  
Under the supervision of Brother Industries Ltd., this manual has been compiled and published, covering the latest product  
descriptions and specifications.  
The contents of this manual and the specifications of this product are subject to change without notice.  
Brother reserves the right to make changes without notice in the specifications and materials contained herein and shall not be  
responsible for any damages (including consequential) caused by reliance on the materials presented, including but not limited  
to typographical and other errors relating to the publication.  
This product is designed for use in a Professional Environment.  
Copyright and License  
©2006 Brother Industries, Ltd.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LP3415040  
ARL/ASA/NZ  
Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Servis Washer Dryer WASHER DRYER User Manual
Sharp Calculator EL 5230 User Manual
Snapper Blower SLBC55151BV User Manual
SonicWALL Humidifier 5812 User Manual
Sony Car Stereo System sony digital audio tape deck User Manual
Sony Cassette Player WM FX494 User Manual
Sony VCR SLV SE800D1 User Manual
Sunbeam Electric Steamer ST6820 User Manual
Sylvania Clock Radio SIP378 User Manual
TAG DVR SV 100 M DVR User Manual