VAIO Digital Studio™
Computer User Guide
PCV-R553DS/PCV-R556DS/PCV-R558DS
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
❑
Do not use the modem or a
telephone to report a gas leak in
the vicinity of the leak.
Safety Information and Caution
DVD Laser diode properties
The socket outlet shall be
installed near the equipment and
shall be easily accessible.
40mW(DVD)
0.14mW (CD)
Laser output
650nm (DVD)
780nm (CD)
Wave Length
!
To change the backup battery,
please contact your nearest Sony
Service Center.
CDRW Laser diode properties
!
Caution - The use of optical
instruments with this product will
increase eye hazard. As the laser
beam used in this product is
harmful to the eyes, do not
attempt to disassemble the drive
cabinet. Refer servicing to
1.0mW(Read)
35mW (Write)
Laser output
777–787nm
Wave Length
❑
To prevent fire or shock hazard,
do not expose your desktop to
rain or moisture.To avoid
electrical shock, do not open the
cabinet. Refer servicing to
qualified personnel only.
qualified personnel only.
!
!
!
Danger - Visible and invisible
laser radiation when open. Avoid
direct exposure to beam.
For CD-RW: Danger - Invisible
laser radiation when open. Avoid
direct exposure to beam.
❑
❑
Never install modem or telephone
wiring during a lightning storm.
Never install telephone jacks in
wet locations unless the jack is
specifically designed for wet
locations.
Caution: For ADSL modem
models, to reduce the risk of fire,
use only No. 26 AWG or larger
telecommunication line cord.
❑
Never touch uninsulated
telephone wire or terminals
unless the telephone line has been
disconnected at the network
interface.
!
Pour changer la pile de rechange,
veuillez contacter votre centre de
service Sony le plus près.
❑
❑
Use caution when installing or
modifying telephone lines.
Avoid using the modem during an
electrical storm.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
❑
❑
Soyez très prudent lorsque vous installez
ou modifiez les lignes téléphoniques.
!
Avertissement - L'utilisation
d'instruments optiques avec ce
produit augmente les risques pour
les yeux. Puisque le faisceau
laser utilisé dans ce produit est
dommageable pour les yeux, ne
tentez pas de désassembler le
boîtier. Adressez-vous à un agent
de service qualifié.
Évitez d’utiliser le modem durant un
orage électrique.
N'utilisez pas le modem ni le téléphone
pour prévenir d'une fuite de gaz vous êtes
près de la fuite.
❑
L’appareil doit être le plus près possible
d’une prise murale pour en faciliter
l’accès.
For questions regarding your product or for the
Sony Service Center nearest you, call 1-888-
476-6972 in the United States or 1-800-961-
7669 in Canada.
!
!
Danger : Radiation laser visible et
invisible si ouvert. Évitez
l’exposition directe au faisceau.
Pour les CD-RW : Danger :
Radiation laser visible et invisible
si ouvert. Évitez l'exposition
directe au faisceau.
Sony Customer Support can be reached at
!
Attention : Pour ADSL modele
modem, afin de réduire les
risques d'incendie, n'utilisez
qu'un cordon de communication
N0. 26 AWG ou plus gros.
❑
Pour prévenir tout risque d’incendie ou
d’électrocution, garder cet appareil à
l’abri de la pluie et de l’humidité.
❑
Pour prévenir tout risque d’électrocution,
ne pas ouvrir le châssis de cet appareil et
ne confier son entretien qu’à une personne
qualifiée.
❑
❑
Ne jamais effectuer l’installation de fil
modem ou téléphone durant un orage
électrique.
Ne jamais effectuer l’installation d’une
prise téléphonique dans un endroit
mouillé à moins que la prise soit conçue à
cet effet.
❑
Ne jamais toucher un fil téléphonique à
découvert ou un terminal à moins que la
ligne téléphonique n’ait été débranché de
l’interface réseau.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
on, the user is encouraged to try to correct the
interference by one or more of the following
measures:
Regulatory Information
Declaration of Conformity
❑
❑
❑
Reorient or relocate the receiving
antenna.
Trade Name:
Model No.:
SONY
Increase the separation between
the equipment and the receiver.
PCV-R553DS/
PCV-R556DS/
PCV-R558DS/
Connect the equipment into an
outlet on a circuit different from
that to which the receiver is
connected.
Responsible
Party:
Sony Electronics Inc.
Address:
1 Sony Drive
Park Ridge, NJ 07656
❑
Consult the dealer or an
experienced radio/TV technician
for help.
Telephone:
201-930-6972
This phone number is for FCC-related
matters only.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
This device complies with Part 15 of the
FCC rules. Operation is subject to the
following two conditions:
Only peripherals (computer input/output
devices, terminals, printers, etc.) that comply
with FCC Class B limits may be attached to this
computer product. Operation with
noncompliant peripherals is likely to result in
interference to radio and television reception.
(1) This device may not cause harmful
interference, and
(2) this device must accept any interference
received, including interference that may
cause undesired operation.
All cables used to connect peripherals must be
shielded and grounded. Operation with cables,
connected to peripherals, that are not shielded
and grounded, may result in interference to
radio and television reception.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of the Rules. These
limits are designed to provide reasonable
protection against harmful interference in a
residential installation. This equipment
FCC Part 68
generates, uses, and can radiate radio frequency
energy and, if not installed and used in
This equipment complies with Part 68 of the
FCC rules. The FCC Ringer Equivalence
Number (REN) for this equipment is 0.7. If
requested, this information must be provided to
the telephone company.
accordance with the instructions, may cause
harmful interference to radio communications.
However, there is no guarantee that interference
will not occur in a particular installation. If this
equipment does cause harmful interference to
radio or television reception, which can be
determined by turning the equipment off and
This modem uses the USOC RJ-11 telephone
jack.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
The REN is used to determine the quantity of
devices which may be connected to the
telephone line. Excessive RENs on the
the state or provincial utility service
commission, public service commission, or
corporation commission for information.)
telephone line may result in the devices not
ringing in response to an incoming call. In
most, but not all areas, the sum of the RENs
should not exceed five (5.0). To be certain of
the number of devices that may be connected to
the line, as determined by the total RENs,
contact the telephone company to determine the
maximum REN for the calling area.
Telephone Consumer
Protection Act of 1991
(United States)
The Telephone Consumer Protection Act of
1991 makes it unlawful for any person to use a
computer or other electronic device to send any
message via a telephone facsimile machine
unless such message clearly contains, in a
margin at the top or bottom of each transmitted
page or on the first page of the transmission, the
date and time it is sent and an identification of
the business, other entity, or individual sending
the message, and the telephone number of the
sending machine or such business, other entity,
or individual.
If the terminal equipment causes harm to the
telephone network, the telephone company will
notify you in advance that temporary
discontinuance of service may be required. But
if advance notice is not practical, the telephone
company will notify the customer as soon as
possible. Also, you will be advised of your right
to file a complaint with the FCC if you believe
it is necessary.
The telephone company may make changes in
its facilities, equipment, operations or
In order to program this information into your
facsimile machine, see your fax software
documentation.
procedures that could affect the operations of
the equipment. If this happens, the telephone
company will provide advance notice in order
for you to make the necessary modifications in
order to maintain uninterrupted service.
Telephone Consumer
Guidelines (Canada)
If trouble is experienced with this modem, for
repair or warranty information, please contact
1-888-4SONY-PC, or write to the Sony
Customer Information Center, 12451 Gateway
Blvd., Fort Myers, FL 33913. If the trouble is
causing harm to the telephone network, the
telephone company may request that you
remove the equipment from the network until
the problem is resolved.
Please refer to your telephone directory under
‘Privacy Issues’ and/or ‘Terms of Service.’ For
more detailed information, please contact:
CRTC
Terrasses de la Chaudiére, Tour centrale
1 promenade du Portage, 5 étage Hull PQ K1A
0N2.
This Class B digital apparatus complies with
Canadian ICES-003.
Repair of this equipment should be made only
by a Sony Service Center or Sony authorized
agent. For the Sony Service Center nearest you,
call 1-888-4SONYPC (1-888-476-6972).
Cet àppareil numérique de la classe B est
conforme à la norme NMB-003 du Canada.
This equipment cannot be used on public coin
service provided by the telephone company.
Connection to Party Line Service is subject to
state and possible provincial tariffs. (Contact
6
Download from Www.Somanuals.com. All Manuals Search And Download.
DISPOSAL OF LITHIUM ION
BATTERY
!
!
The battery pack used in this
device may present a fire or
chemical burn hazard if
mistreated. Do not disassemble,
heat above 212°F (100°C) or
incinerate.
You can return your unwanted lithium ion
batteries to your nearest Sony Service Center or
Factory Service Center.
✍ In some areas the disposal of lithium
ion batteries in household or
Dispose of used battery promptly.
Keep away from children.
business trash may be prohibited.
La manutention incorrecte du
module de batterie de cet appareil
présente un risque d'incendie ou
de brûlures chimiques. Ne pas
démonter, incinérer ou exposer à
une température de plus de 100°C.
Évacuer promptement la batterie
usée. Garder hors de portée des
enfants.
For the Sony Service Center nearest you, call 1-
888-476-6972 in the United States or 1-800-
961-7669 in Canada.
!
!
Do not handle damaged or leaking
lithium ion batteries.
Ne pas manipuler les batteries au
lithium-ion qui fuient ou sont
endommagées.
INDUSTRY CANADA
NOTICE
NOTICE: The Industry Canada label identifies
certified equipment. This certification means
that the equipment meets certain
telecommunications network protective,
operational and safety requirements as
prescribed in the appropriate Terminal
Equipment Technical Requirements
document(s). The Department does not
guarantee the equipment will operate to the
userís satisfaction.
!
!
Danger of explosion if battery is
incorrectly replaced. Replace only
with the same or equivalent type
recommended by the
manufacturer. Discard used
batteries according to the
manufacturer’s instructions.
Une batterie non conforme
présente un danger d'explosion.
La remplacer seulement par une
batterie identique ou de type
équivalent recommandé par le
fabricant. Évacuer les batteries
usées selon les directives du
fabricant.
Before installing this equipment, users should
ensure that it is permissible to be connected to
the facilities of the local telecommunications
company. The equipment must also be installed
using an acceptable method of connection.
The customer should be aware that compliance
with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be
coordinated by a representative designated by
7
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
the supplier. Equipment malfunctions or any
repairs or alterations made by the user to this
equipment may give the telecommunications
company cause to request that the user
disconnect the equipment.
être installé en suivant une méthode acceptée de
raccordement. L’abonné ne doit pas oublier
qu’il est possible que la conformité aux
conditions énoncées ci-dessus n’empêche pas la
dégradation du service dans certaines
situations.
Users should ensure for their own protection
that the electrical ground connections of the
power utility, telephone lines and internal
metallic water pipe system, if present, are
connected together. This precaution may be
particularly important in rural areas.
Les réparations de matériel homologué doivent
être coordonnées par un représentant désigné
par le fournisseur. L’entreprise de
télécommunications peut demander à
l’utilisateur de débrancher un appareil à la suite
de réparations ou de modifications effectuées
par l’utilisateur ou à cause de mauvais
fonctionnement.
CAUTION: Users should not attempt to make
such connections themselves, but should
contact the appropriate electrical inspection
authority, or electrician, as appropriate.
Pour sa propre protection, l’utilisateur doit
s’assurer que tous les fils de mise à la terre de la
source d’énergie électrique, des lignes
téléphoniques et des canalisations d’eau
métalliques, s’il y en a, sont raccordés
ensemble. Cette précaution est particulièrement
importante dans les régions rurales.
NOTICE: The Ringer Equivalence Number
(REN) assigned to each terminal device
provides an indication of the maximum number
of terminals allowed to be connected to a
telephone interface. The termination on an
interface may consist of any combination of
devices subject only to the requirement that the
sum of the Ringer Equivalence Numbers of all
the devices does not exceed 5. The Ringer
Equivalence Number for this equipment is 0.7.
Avertissement: L’utilisateur ne doit pas tenter
de faire ces raccordements lui-même; il doit
avoir recours à un service d’inspection des
installations électriques, ou à un électricien,
selon le cas.
AVIS DE L’INDUSTRIE
CANADA
AVIS: L’indice d’équivalence de la sonnerie
(IES) assigné à chaque dispositif terminal
indique le nombre maximal de terminaux qui
peuvent être raccordés à une interface.
AVIS: L’étiquette d’Industrie Canada identifie
le matériel homologué.
La terminaison d’une interface téléphonique
peut consister en une combination de quelques
dispositifs, à la seule condition que la somme
d’indices d’équivalence de la sonnerie de tous
les dispositifs n’excède pas 5. L’indice
d’équivalence de la sonnerie de ce matériel est
de 0.7.
Cette étiquette certifie que le matériel est
conforme aux normes de protection,
d’exploitation et de sécurité des réseaux de
télécommunications, comme le prescrivent les
documents concernant les exigences techniques
relatives au matériel terminal. Le Ministère
n’assure toutefois pas que le matériel
fonctionnera à la satisfaction de l’utilisateur.
Avant d’installer ce matériel, l’utilisateur doit
s’assurer qu’il est permis de le raccorder aux
installations de l’entreprise locale de
télécommunication. Le matériel doit également
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Front Panel Overview ...............................................12
VAIO Action Setup .....................................17
Pre-setting i.LINK devices .......................................18
Creating a Photo Album ...................................................24
Using Panorama Maker ....................................................24
Making Still Images and Panoramic from MPEG ............25
Using Digital Video .................................................26
Connecting a Digital Video Recorder ...............................26
Using DVgate ...................................................................26
Hard Drive Partition .................................................27
9
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Enabling Smart Connect ..........................................29
On Handling Diskettes ..................................................... 50
On Cleaning CD or DVD Media ...................................... 50
For Answers to Your Software Questions ...............52
Sony Service Center ......................................................... 52
Specifications PCV-R553DS ...................................55
Specifications PCV-R556DS/R558DS ....................57
Index ..........................................................59
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Choosing an Ergonomic Location
Welcome
Thank you for purchasing your Sony VAIO computer! Your new computer is a
superb blend of high technology and easy-to-use functionality. This User Guide
contains information about the applications included with your system, contact
information for software vendors, and the specifications for your computer.
Choosing an Ergonomic Location
Before you get started, find the best location for your new computer. Here are
some things to consider when planning your workspace:
❑
❑
❑
Stable work surface — Use a stable work surface large enough to support
the computer and other equipment.
Ventilation — Leave at least eight inches of space on the left and back sides
of your computer to enable proper ventilation.
Placement of the keyboard, mouse, and other input devices — Place
your keyboard, mouse, and other input devices so that your arms and hands
are in a relaxed, comfortable position. The keyboard should be directly in
front of you. Adjust the level of the keyboard so that your lower arms are
parallel to the floor. Keep your wrists in a relaxed position when you are
using the keyboard—not angled up or down. Use the palmrest only briefly,
for resting. While typing, never use the palmrest or rest your hands on the
table. Position the mouse at the same level as the keyboard. Hold the mouse
with a relaxed hand, and use your whole arm to move it. Take breaks during
sessions with your computer. Excessive use of the mouse or a joystick may
strain muscles or tendons.
❑
❑
Furniture and posture — Sit in a chair with good back support and
armrests. Adjust the level of the chair so your feet are flat on the floor. A
footrest may make you more comfortable. Sit in a relaxed, upright posture—
avoid slouching forward or leaning far backward.
Viewing angle of the display — Position the display 18 to 26 inches
directly in front of you, with the top of the screen at or a little below eye
level. Use the display’s tilting feature to find the best position. You can
reduce eye strain and muscle fatigue by placing the display in the proper
position.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
Lighting — Choose a location where windows and lights do not create glare
and reflection on the display. Use indirect lighting to avoid bright spots on
the display. You can also purchase accessories for your display that help
reduce glare. Proper lighting adds to your comfort and work effectiveness.
Front Panel Overview
The front panel of your VAIO Digital Studio Computer allows for access to the
diskette, DVD, and CD-RW drives. It also includes USB and i.LINK ports to
connect USB devices, digital equipment, or other components.
Digital Studio front panel
Emergency Eject
Hole
DVD-ROM Drive
Optical Drive
Eject Button
CD-RW Drive
Optical Drive
Indicator Light
Diskette Drive
Diskette Drive
Access Indicator Light
Diskette
Eject Button
Power/Standby
Switch
Power/Standby
Indicator Light
Hard Disk Drive
Access Indicator
Light
i.LINK
USB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Overview
1
2
HD (drive) access indicator light
Lights in amber while reading/writing data from/to the hard disk.
Power switch and indicator light
Turns on/off the computer.
The indicator light is green while the power is on and amber when the
computer is in standby mode.
3
4
5
6
7
6
7
8
Floppy disk drive
Reads/writes data from/to a 3.5-inch floppy disk.
FD (Floppy disk drive) access indicator light
Lights in green while reading/writing data from/to a floppy disk.
Floppy disk eject button
Ejects the floppy disk.
DVD eject button
Ejects a DVD or CD.
DVD drive
Reads data from a DVD or CD.
CD-RW eject button
Ejects a CD.
CD-RW drive
Reads data from a CD.
Emergency eject hole
If the DVD or CD does not come out when you press the eject button, insert
a thin, pointed object into this hole to eject the disc manually.
✍ For your convenience, your computer includes USB and i.LINK connectors on both the
front and back panels, allowing you to connect to either set of connectors. The i.LINK
connector on the front of your system is a 4-pin connector.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Back Panel Overview
The back panel of your computer contains the connectors where you plug in
supplied and optional accessories. The icons on the back panel serve as a map to
help you locate the connectors on your computer.
PCV-R553DS back panel
PS/2 Mouse
Keyboard
USB
Power
Serial
Printer/Parallel
Monitor
Games/MIDI
Headphones
LINE IN
Microphone
Ethernet
i.LINK (IEEE1394)
Line
Telephone
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Overview
PCV-R556DS/PCV-R558DS back panel
PS/2 Mouse
Keyboard
Ethernet
Power
USB
Serial
Printer/Parallel
i.LINK (IEEE1394)
Games/MIDI
Headphones
LINE IN
Microphone
Monitor
Line
Telephone
1
2
3
4
5
TELEPHONE jack
Connects the phone to the computer.
LINE jack
Connects a phone cable to the wall jack.
i.LINK 6-pin connector (IEEE1394)
Connects a digital device such as a Sony Digital Handycam Camcorder.
®
EMPTY PCI SLOTS (One filled with ADSL Modem card on custom models)
For a PCI Add-On Card (not supplied).
MIC (Microphone) connector*
Connects a microphone (not supplied).
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
6
LINE IN connector
Connects an audio device.
7
PHONES (Headphones) connector*
Connects headphones (not supplied).
8
Games/MIDI connector
Connects a game or MIDI device.
9
MONITOR connector
Connects a standard CRT display.
10
11
12
13
PRINTER connector
Connects a parallel device, such as a printer or scanner.
SERIAL connector
Connects a serial device, such as a digital still camera.
USB (Universal Serial Bus) connector (one for R553, two for R556/R558)
Connects a USB device.
ETHERNET connector
10Base-T/100Base-TX Fast Ethernet interface.
!
The connector marked with
(Network) is for LAN connections.
14
15
16
KEYBOARD connector
Connects a keyboard.
PS/2 mouse connector
Connects a PS/2 mouse.
AC INPUT connector
Connects the supplied power cord.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Action Setup
VAIO Action Setup manages the settings for your computer’s Shortcut keys (S
Keys) and i.LINK interface. The programmable S Keys come with the following
applications as their default settings:
❑
❑
❑
❑
❑
❑
S1 — Outlook Express
S2 — Internet Explorer
S3 — Media Bar
S4 — Picture Gear
S5 — DVGate Motion
S6 — Help/Demo
All six buttons are reprogrammable.
To change the settings of the S Keys:
1
From the Start menu, select Programs > VAIO Action Setup > VAIO Action
Setup.
✍ You can also double-click
on the Windows taskbar to open VAIO Action Setup.
2
3
Click the S Key you want to change.
From the Select Application dialog box, click the radio button for the desired
type of function. The corresponding applications appear in the list box on the
right.
✍ You may also use the drag and drop feature to place any application into the list box.
4
The Confirmation Application Name window appears showing you the
application you have selected. Click Next.
5
You may now type a new name and description, if desired. Then click Finish.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Pre-setting i.LINK devices
You can pre-set your i.LINK-equipped devices to launch desired functions, such
as automatically starting DVgate applications or connecting two VAIO
computers.
To pre-set your i.LINK device to launch a desired function:
1
From the Start menu, select Programs > VAIO Action Setup > VAIO Action
Setup.
2
3
4
5
6
Click i.LINK.
Click the Advanced Setting tab.
Click the Enable i.LINK launcher function checkbox and click Apply.
Connect the device to your computer with your i.LINK cable.
Turn on the device.
The VAIO Action Setup dialog box appears.
Click OK.
7
8
To modify the device name, click the current device name in the list box and
click Modify device name.
9
Type the desired name and click Apply.
10 To assign an application, click Modify.
The Select Application dialog box appears.
11 Select the desired application and click Next.
12 Click Next to confirm the application name.
The Input Application Name dialog box appears. You may change the name
and description of the application you want to launch.
13 Click Finish to complete this step.
The next time the device is connected and turned on, the assigned
application will launch automatically.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Window Design of Sony Software
Changing the Window Design of Sony Software
To change the window design of Sony software:
1
2
3
4
5
Click the Start button, point to Settings, and then click Control Panel.
Click UI Design Selector.
Click << or >> and select the desired design.
Click Apply.
The “UI Design Selector” window design changes. The window design for
your Sony software will match the “UI Design Selector” window.
6
7
To try another selection, click << or >>. Then, click OK.
The UI Design Selector closes and the Sony software window design
displays.
✍ You may use the feature with UI Design Selector-compatible software only.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Sony Digital Media Park
Applications
Your VAIO® computer comes with a collection of applications that make it easy
to use advanced multimedia formats. This section highlights the Media Park
applications and the digital video capabilities.
Media Bar™
Media Bar software is your all-in-one solution for audio/video playback. Media Bar
software handles all common computer multimedia formats, and controls selected Sony
devices. Media Bar software encompasses audio/video library cataloging and playlist
management, in addition to digital video quality control and effects features. Media Bar
seamlessly integrates a variety of new media formats with an easy-to-use software
interface.
DVgate™
DVgate makes it easy to edit digital videos. You can capture, edit, and grab digital video
clips and then assemble them into a polished home video everyone will enjoy. You can
also use DVgate to capture individual frames from digital video clips, and then save them
as graphic files. Enhance your Web page, send family and friends your favorite stills,
create your own wallpaper. The possibilities are endless.
PictureGear™
PictureGear is a digital image management application that allows you to see all the
images stored in any directory on your computer. Thumbnail views provide quick
reminders of your pictures. Brighten, contrast, enhance, resize, crop, and color-correct
your pictures. Create panoramic views, animations, screen savers, wallpaper, and even
HTML photo albums.
Smart Capture
Smart Capture is a fun new way to send multimedia messages via e-mail. Smart Capture
manages the i.LINK® connection between your computer and a Sony Digital Handycam
Camcorder, or other cameras that support the i.LINK interface. Smart Capture allows you
to capture and compress video or still images that you can save or share via e-mail.
Captures are low resolution, making it ideal for e-mail. For high-quality captures, use
DVgate.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Shaker
Movie Shaker
This application can be used to create fun and innovative movies without any
knowledge of film editing. In a few simple steps, motion pictures can be
combined with special effects, still images (pictures), and music files and then
saved in a format most computers can play.
Main Window
Working Panel
Editing trays
Clip tray
Help
Product tray
Trash
Importing Images and Sound Clips
1
2
3
4
Click
.
Find the file you want to add.
Select the file.
Click Open. The file is added to the Clip tray.
Create a Movie using Shaker
After adding clip(s) to the Clip tray, you can create a short movie using the
Shaker feature. Shaker randomly select clips from the Clip tray to create a 30-
second scene.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
1
2
Click the Shake tab.
Select a mood by clicking a face in the Shaker tray.
3
4
Click
. A thirty second scene is automatically generated and
saved to the Product tray.
To preview, switch the Work Panel to Product tray mode and press play.
✍ Scenes created with Shaker begin with black frame and after processing are placed
in the first available slot on the Product tray.
Editing Clips and Scenes
You can edit your movie by adding effects and text, adjusting the color and
contrast, and modifying the length of clips.
Working Panel
Sound
Color
Monitor
Speed
Effect Palette
Trim Palette
Effect Knobs
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Movie Shaker
Adding effects to a scene or a clip:
1
2
3
Double-click the clip or scene to move it to the Working Panel.
Select the Effects tab from the Editing tray.
Drag and drop the Effect you want to add from the Effects tray to the Effects
palette on the Working Panel.
✍ To preview an Effect, click on the clip in the Working panel monitor. Your clip displays
with the new effect on the Effect tray monitor.
4
See help for instructions on adjusting effect duration and replaying clips/
scenes.
Saving a Movie
1
Verify that the clip(s) you want to save is on the Product tray. See Help for
more details on saving movies.
2
3
4
5
6
7
Click Export.
Select the format in which you want the document to be saved.
Click Next.
Locate the folder to which you want the file saved.
Name the file.
Click Save.
!
Exporting movies may take a long time to complete—Save movie as DV (Digital
Video) takes the longest and Quick-Save is the fastest.
✍ For DV playback or smooth video playback, we recommend the following resolution/
refresh rates: 1024×768/75Hz or lower.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
PictureGear™
PictureGear is a digital image management application that allows you to see all
the images stored in any directory on your computer. Thumbnail views provide
quick reminders of your pictures. Brighten, contrast, enhance, resize, crop, and
color-correct your pictures. Create panoramic views, animations, screen savers,
wallpaper, still pictures from MPEG, and even html photo albums.
Managing Your Pictures
Use the collection feature to manage your pictures.
1
2
3
4
Click the Folder tab and browse to locate your pictures.
Select the pictures you want to have in a collection.
From Collection menu, select Create New Collection.
Enter a name for the collection and then click okay.
Creating a Photo Album
1
2
3
4
5
Select the pictures you want to use to make an album.
From the Utilities menu, select Album Maker.
Choose the type of Album you want and click Okay.
Now add more pictures, frames, text, and effects.
When you are finished, select Create Album in File menu or click the Create
Album icon on the toolbar.
6
7
8
Designate the folder you where want to save the Album.
Enter the Target Album name, select Thumbnails and click Okay.
The new album can be viewed using most internet browsers.
Using Panorama Maker
Panorama Maker stitches a group of still images into a 360 degree panoramic
picture. The source images should be the same size and overlap 20%.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
PictureGear™
How to stitch a panoramic picture:
1
2
Gather the source images into the same folder or collection.
Select the images you want to use.
✍ We recommend 12 landscaped or 16 portrait pictures.
From the Utilities menu select Panorama Maker.
3
4
Select the correct lens and click Okay. (If 35mm lens is selected the prompt,
does not appear; to select a different lens, click the lens icon.)
5
6
Click the panoramic icon, near the bottom of the window.
Click Full Stitch.
Making Still Images and Panoramic from MPEG
1
2
3
Select the MPEG file.
From the Movie/Sound menu, select Scene break down.
Then select Movie Stitch, to create a panoramic picture.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Using Digital Video
Connecting a Digital Video Recorder
Before connecting a digital video camera recorder to your computer, turn off the
power on the camera. After connecting the camera, turn the power back on. You
do not need to turn off the computer when connecting a camera.
Using DVgate
When capturing clips:
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
Do not use DVgate when the connected digital video peripheral is in Timer
Recording mode, as this could produce a malfunction in the peripheral.
Captures larger than 2 GB (9 minutes and 30 seconds) are automatically
continued in a second file.
You can record stereo audio (stereo 1) while capturing video. You cannot add
audio on the stereo 2 track after capturing the video data.
You cannot use different audio modes on the same tape. You should perform
a separate capture for each audio mode you wish to use.
DVgate does not support hard disk compression. You should not use disk
compression if you are planning to work with DVgate.
Title data is saved in the flash memory of a digital video camera and is not
transferred to tape by DVgate.
To avoid interruption of capture sessions, you should disable the screen
saver.
The drop frame compensation feature does not provide accurate
compensation adjustments for tapes recorded in LP mode.
For tapes that include a mixture of both SP and LP mode, the information
displayed by the capture progress indicator may not be accurate.
Make sure the video head of your digital video device is properly cleaned.
Anomalies that you see in captured data could be due to dust or other
particles on the video head.
❑
The last frame captured is one frame before your selected [OUT] point. The
frame you see immediately after clicking the [OUT] button is not captured.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Hard Drive Partition
When recording AVI files to tape:
❑
Do not use DVgate when the connected digital video peripheral is in Timer
Recording mode, as this could produce a malfunction in the peripheral.
✍ You can record only AVI files. MPEG files cannot be recorded.
❑
❑
To avoid recording problems, such as a single frame appearing in multiple
frames, close other applications on your system while recording.
You cannot use different audio modes on the same tape. If you have AVI files
that use different audio modes, they cannot be recorded at the same time, but
must be recorded separately.
❑
❑
Do not attempt to work with AVI files that are smaller than 4 MB.
DVgate does not support hard disk compression. Do not use disk
compression if you are planning to work with DVgate.
❑
❑
In order to maximize recording capabilities, video and audio data are not
available while you are recording.
If DVgate indicates that frames have been dropped, close all open
applications, or defragment your hard drive.
Hard Drive Partition
In order to improve the performance of your computer’s DVgate software, the
hard disk drive on your computer has been formatted with two partitions, C and
D. DVgate saves files to the D partition. This prevents large video captures from
consuming the available space on your C partition. To maintain optimum
performance of DVgate, you should defragment your D partition regularly.
Defragmenting your Hard Disk Drive
If you encounter frame dropping while recording digital video onto your hard
disk drive, defragmentation may be necessary.
To defragment your hard disk drive:
1
2
Deactivate your screen saver, if applicable.
From the Start menu, select Programs > Accessories > System Tools > Disk
Defragmenter.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
3
Run Disk Defragmenter.
✍ It may take more than a couple of hours to complete defragmentation, depending
on the data capacity and utilization of your computer’s hard disk drive(s).
i.LINK (IEEE1394) Compatibility
Your VAIO computer includes a 4-pin i.LINK connector on the front of the
system and a 6-pin i.LINK connector on the back of the system.
A 6-pin i.LINK connector can:
❑
supply power from the computer to the connected device if the device is
equipped with a 6-pin connector, and
❑
supply 10V to 12V.
!
The total power supplied by the 6-pin i.LINK connector cannot exceed 6 watts.
A 4-pin i.LINK connector cannot supply power to a connected device.
The following Sony i.LINK 400 Mbps cables are available and recommended for
use with your computer: VMC-IL4415, VMC-IL4435, VMC-IL4615, VMC-
IL4635, VMC-IL6615, and VMC-IL6635. Sony computer supplies, accessories,
and peripherals can be purchased from your dealer or by contacting Sony at http:/
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Enabling Smart Connect
To connect an i.LINK (IEEE1394) device
❑
Use the symbol to locate the i.LINK connector. Plug the i.LINK cable into
this connector.
✍ See the manual that came with your i.LINK (IEEE1394)-equipped device for more
information on setting it up and using it.
Enabling Smart Connect
Your computer comes with preinstalled Smart Connect software. To enable faster
startup, your computer ships with this software disabled.
To enable Smart Connect:
1
From the Start menu, select Settings > Control Panel.
The Control Panel window appears.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
2
Click the System icon.
The System Properties window appears.
Click the Device Manager tab.
Click Sony i.LINK(1394) Adapter.
The Sony i.LINK(1394) Adapter window appears.
Click the Enable Device button.
Click OK.
3
4
5
6
The Sony i.LINK(1394) Adapter icon should no longer have an “X” on it.
This means Smart Connect is now enabled.
7
Close all windows and restart your computer in order for the new settings to
take effect.
Now your Smart Connect software is ready to use.
✍ When you use Smart Connect to connect two VAIO computers, you must assign each
computer a unique name by which it can be identified when the two computers are
networked. See the Smart Connect online Help for more information.
Enabling Ethernet
Your computer comes with a preinstalled Ethernet interface. To enable faster
startup, your computer ships with this function disabled. You may, however,
enable Ethernet connectivity by following the instructions below.
To enable the Ethernet connection:
1
2
3
Right-click My Computer on the desktop and select Properties.
Click the Device Manager tab.
Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the
Network Adapters category.
4
5
6
Click Properties.
Click Enable Device and then click OK.
Click Close.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
System and Application
Recovery CD(s)
System Recovery CD(s)
Sony Electronics
The System Recovery CD program allows you to restore the software titles that shipped
with your computer if they become corrupted or are erased accidentally. It can be used
only to restore the hard disk of the Sony computer you purchased.
Application Recovery CD(s)
Sony Electronics
The Application Recovery CD program allows you to reinstall individual applications and
device drivers. Use it to restore corrupted or accidentally erased files.
Using the System Recovery CD(s)
You can reinstall software titles that shipped with your computer if they are
corrupted or accidentally erased. You may not need to recover the entire contents
of your hard drive. If you experience a problem with your computer, reinstalling
an individual device driver or software title may correct the problem.
✍ Use the Application Recovery CD program to reinstall individual applications or device
drivers.
The System Recovery utility provides three options:
❑
Full Restore without Format — restores all the software titles that
originally came with your computer without formatting the hard disk.
!
If you choose the Full Restore without Format option, you may need to reinstall
applications that were not included with the computer when you purchased it. If
you have any questions on using the System Recovery CD(s), contact Sony
Customer Support.
❑
Full Restore with Format — formats the hard disk drive and then restores
all the original software. If your hard drive is partitioned into C and D drives,
the computer will offer you the option to reformat the drive into a single
partition.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
Operating System Only — formats the hard disk drive and restores the
Windows operating system and the device drivers that shipped with your
computer. This option is recommended for advanced users only.
!
If you choose the Full Restore with Format or Operating System Only option, your
hard disk will be formatted, which removes all the information on the hard disk
drive. You will lose any software you have installed and any other files you have
created since you started to use your computer. You must reinstall any
applications that were not included with the computer when you purchased it.
To use the System Recovery CD(s):
✍ You need to complete the Windows registration process when you use the System
Recovery CD(s).
1
Insert the Sony System Recovery CD in the DVD-ROM drive.
✍ The System Recovery utility boots from the DVD-ROM drive. It must be in the
drive when you turn on the computer.
2
3
4
Shut down your computer.
Wait 30 seconds and turn on your computer.
Click OK to signify you have read and accept the Microsoft End-User
License Agreement.
5
When the System Recovery menu appears, follow the on-screen instructions
to complete the recovery process.
✍ Your system may include one or two System Recovery CDs. If you have two System
Recovery CDs, insert the first CD to run the System Recovery program. You are
prompted to insert the second CD once the information from the first CD has been
installed.
The recovery process takes 30 to 60 minutes to complete.
After recovering your system using the System Recovery CD(s), you may be prompted
to insert your Application Recovery CD(s) after restarting Windows. Insert the
Application Recovery CD(s) to complete full recovery of your system.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Application Recovery CD(s)
Using the Application Recovery CD(s)
The Application Recovery CD program allows you to reinstall individual
applications and device drivers if they are corrupted or accidentally erased.
Reinstalling an individual device driver or software title may correct a problem
you are experiencing with your computer, and you may not need to recover the
entire contents of your hard drive.
✍ If you do need to reinstall all the software titles that shipped with your computer, use
the System Recovery CD(s).
You must be in Windows to run the Application Recovery CD(s). The application
will not run from DOS. If you have any questions on using the Application
Recovery CD(s), contact Sony Customer Support.
To use the Application Recovery CD(s):
1
Turn on your computer. If your computer is already on, close all
applications.
2
When the Windows desktop appears, insert the Sony Application Recovery
CD in the DVD-ROM drive. The Application Recovery utility loads
automatically.
3
When the Application Recovery menu appears, follow the on-screen
instructions to complete the recovery process.
✍ Your system may include one or two Application Recovery CDs. If you have two
Application Recovery CDs, insert the first CD to run the Application Recovery program.
You may be prompted to insert the second CD, depending on the application you wish
to restore.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Troubleshooting
This section describes how to solve common problems you may encounter when
using your computer. Many problems have simple solutions, so try these
suggestions before you call Sony Customer Support.
Topic: My computer does not start.
❑
❑
❑
❑
❑
Check that the computer is plugged into a power source and that it is turned
on. Check that the power light is lit on the front panel of the computer.
Confirm that a diskette is not in the diskette drive (unless you are using a
bootable diskette).
Confirm that the power cord and all cables are connected firmly, as described
on the color poster.
If you plugged the computer into a power strip or Universal Power
Supply (UPS), make sure the power strip or UPS is turned on and working.
Check that the display is plugged into a power source and turned on. Check
that the brightness and contrast controls are adjusted correctly. See the
manual that came with your display for details.
❑
Check that the computer is not in standby mode.
Topic: My files are corrupted or deleted and I want to recover applications
or drivers that came with my computer.
See “Using the Application Recovery CD(s)” in this manual.
Topic: My computer or software program “locks up.”
1
2
Press Ctrl+Alt+Delete to close the application that is currently “locked up.”
In the Close Program dialog box, scroll down until you locate “(Not
responding)” next to an application.
3
Select this application and click End Task. Windows attempts to close the
application. If the attempt is unsuccessful, a second dialog box appears.
4
Select End Task again.
❑
If you are unable to “unlock” the application, repeat the above steps but
select Shut Down when the Close Program dialog box appears.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
❑
If the above steps fail to “unlock” your computer, try the following steps:
1
2
3
4
Save any unsaved work, if possible.
Press Alt+F4.
Select Restart.
Click OK.
❑
If you cannot restart as described in the preceding steps, you can restart the
computer by pressing Ctrl+Alt+Delete or by pressing the power switch for
more than six seconds.
✍ Pressing Ctrl+Alt+Delete twice consecutively may result in the loss of changes
made to files that are currently open.
❑
Contact the software publisher or designated provider for technical support.
See the contact information in this manual.
Topic: Why does Windows lock up during shutdown?
The Windows® operating system may not shut down properly for many reasons,
including incompatible or conflicting drivers, damaged files, or non-responsive
hardware. For troubleshooting information, you can search Windows Help.
1
2
3
4
From the Start menu, select Help.
Click the Contents tab.
Click Troubleshooting and then click Windows 98 Troubleshooters.
Click the subject for which you want information, and then answer the
questions that are appropriate for your problem.
Topic: How do I change the parallel port type to ECP, EPP, or bi-
directional?
You can change the parallel port type using the System Setup utility (CMOS
Setup Utility). To access System Setup:
1
2
3
From the Start menu, select Shut Down, and then select Restart.
When the Sony screen displays, press the F2 key on your keyboard.
Select the Advanced tab from the CMOS Setup Utility screen.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
4
Select “I/O Device Configuration” and use the arrow keys to highlight
Parallel Port Mode.
✍ You can toggle between the Normal (bi-directional), EPP, ECP, and ECP+EPP options
using the Plus (+) or Minus (-) keys.
5
When the desired setting displays, press the Escape key.
Topic: My CD drive tray does not open.
❑
❑
Use the eject button
1
2
Make sure the computer is turned on.
Press the Eject button on the drive.
Use the My Computer icon
1
2
3
Click the My Computer icon on the Windows® desktop.
Right-click the CD-ROM icon.
Select the Eject option from the pop-up menu.
Topic: I cannot play a CD-ROM.
❑
After inserting your CD, wait a few seconds for it to be detected before
trying to access it.
❑
❑
❑
Make sure you place the disc in the tray with the label side facing up.
Make sure the software is installed according to the program’s instructions.
If your drive reads some CDs, but not others, check the shiny side of the disc
for dirt or scratches. You may also need to clean the disc drive lens with an
appropriate cleaner.
Topic: I cannot play a DVD-ROM.
❑
If a region code warning appears when you are using the DVD player, it
could be that the DVD-ROM you are trying to play is incompatible with the
DVD-ROM drive in your VAIO Digital Studio™ Computer. The region code
is listed on the disc’s packaging. Region code indicators such as “1” or
“ALL” are labeled on some DVDs to indicate what type of player can play
the disc. Unless a “1” or “ALL” appears on the DVD or on the packaging,
you cannot play the disc on this computer.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
❑
If you hear audio but cannot see video, your computer’s video resolution
may be set too high. For best results, change the screen area to 800 x 600
using 16-bit color. To change this setting:
1
2
3
4
5
6
Click the My Computer icon on your desktop.
Click Control Panel.
Click Display.
Click the Settings tab.
Change the screen area and color.
Click OK.
❑
If you see video but cannot hear audio, check all of the following:
1
2
3
4
5
Make sure your DVD player’s mute setting is off.
Check the master volume setting in the audio Mixer.
Check the volume settings on your computer speakers.
Check the connections between your speakers and the computer.
Check the Windows® Control Panel > System > Device Manager to see
that the drivers are installed properly.
❑
A dirty or damaged disc may cause the computer to “hang” while it tries to
read the disc. If necessary, remove the disc and check that it is not dirty or
damaged.
Topic: I want to play a CD with my Microsoft CD Player.
When you insert a music CD, the Sony Media Bar™ automatically launches to
play your CD. When the Sony Media Bar is running, the Microsoft CD Player
does not have access to the CD. Close Media Bar to use the Microsoft CD Player.
If you do not hear any music, check all your volume controls.
Topic: When I click an application icon, a message such as “You must insert the
application CD into your drive” appears and the software does not start.
❑
Some titles require specific files that are located on the application’s CD-
ROM. Insert the disc and try starting the program again.
❑
Check to make sure you inserted the CD-ROM with the label side facing up.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Topic: Why doesn't my CD-RW drive record at the highest speed?
You must use 4x CD-RW or 8x CD-R media to achieve optimum performance.
If you must use other media and are having difficulty formatting non-4x CD-RW
media, change the write speed from 4x to a lower setting. To change the write
speed from the default to a lower speed:
1
2
Click the My Computer icon on your desktop.
Right-click the CD-RW drive icon.
✍ Your CD-RW drive is assigned drive H as its default.
3
Select Properties.
4
5
6
Select the Settings tab.
Change the “Current Write Speed” field to 1x or 2x.
Click OK.
Topic: How do I change the video resolution of my display?
1
2
3
4
From the Start menu, select Settings > Control Panel.
Click the Display icon and select the Settings tab.
Move the Display area slider to change the resolution.
Click OK.
Topic: Why is there no sound in any application?
There are independent controls for your system volume.
❑
❑
❑
Check that the speakers are plugged into the HEADPHONES connector.
If the speakers have a mute button, make sure it is off.
If the speakers are powered by batteries, check that the batteries are inserted
properly and that they are charged.
❑
If the speakers use an external power source, make sure that the power cord
is plugged into a grounded wall outlet or power strip.
❑
❑
If the speakers have their own volume control, check the volume level.
If the program you are using has its own volume control, check that the
volume is turned up.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
❑
Check the volume controls in the application, in the audio mixer, and in
Windows. There is a volume control
on the Windows® taskbar. Click the
icon and slide the level bar up to increase the volume.
❑
❑
Check that the Mute check box is not selected in the Windows volume
control
.
If you connected headphones to the computer, you will not hear sound from
the speakers.
Topic: My modem connection is slow.
The computer’s modem uses Lucent 1648 technology/V.90. Many factors
influence modem connection speed, including telephone line noise or
compatibility with telephone equipment (such as fax machines or other modems).
If you think your modem is not connecting properly to other PC-based modems,
fax machines, or your Internet Service Provider, check the following:
❑
❑
❑
❑
❑
Have your phone company check that your phone line is free from any line
noise.
If your problem is fax-related, check that there are no problems with the fax
machine you are calling and that it is compatible with fax modems.
For optimum performance, ensure you are calling an Internet Service
Provider number that is V.90-compliant.
If you are having a problem connecting with your Internet Service Provider,
check that the ISP is not experiencing technical problems.
If you have a second phone line available, try connecting the modem to this
line.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Topic: My modem does not work.
❑
❑
Check that the phone line is plugged into the LINE jack.
Check that the phone line is working. You can check the line by plugging in
an ordinary phone and listening for a dial tone.
❑
❑
Check that the phone number the program is dialing is correct.
Verify that the software you are using is appropriately configured to
recognize and interact with the Sony computer modem. Call the software
publisher if you do not know how to configure the software to recognize the
modem. All programs preinstalled by Sony are compatible.
❑
If you suspect your modem is not functioning, you can perform a simple test
to find out.
1
2
3
4
5
6
Click the My Computer icon on your desktop.
Click Control Panel.
Click Modems.
Click the Diagnostics tab.
Select COM2.
Click More Info.
If your modem is functioning, a More Info dialog box will display. If your
modem is not functioning, an error message will appear.
Topic: How do I change my modem to rotary or Touch-Tone dialing?
1
2
3
4
5
Click the My Computer icon on your desktop.
Click Control Panel and then click Modems.
Click Dialing Properties.
Select the Tone dial or Pulse dial radio button next to “Dial using.”
Click OK.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Topic: How do I set up faxing capability in Windows® 98 Second Edition?
Windows® 98 Second Edition does not provide a built-in fax utility. Sony has
included the Symantec WinFax™ Basic Edition software for your faxing needs.
1
From the Start menu, select Programs > Symantec WinFax Basic Edition >
Configure WinFax Basic Edition.
2
Follow the on-screen instructions to configure the fax utility.
Topic: My microphone does not work.
Check that the microphone is plugged into the MIC connector.
Topic: My microphone is too sensitive to background noise.
If you find there is too much background noise when you record sound, you
should adjust the microphone gain by following these steps:
1
Right-click the speaker icon (Volume) in the lower-right Windows® task
tray.
2
Click Open Volume Controls.
The Volume Control screen appears.
In the Options menu, select Properties.
The Properties screen appears.
3
4
Change the setting for “Adjust volume for” from Playback to Recording,
then click OK.
5
6
Decrease the microphone level.
If available, click the Advanced button under Microphone Balance.
The Advanced Controls for Microphone screen appears.
Deselect the check box for 1 Mic Gain (+20dB), then click the Close button.
Close the Recording Control window.
7
8
41
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Topic: My mouse does not work.
❑
❑
Check that the mouse is plugged into the MOUSE connector.
There may be dust or dirt inside the mouse mechanism. To clean the mouse,
follow these steps:
1
2
Turn off your computer and turn the mouse upside down.
Remove the mouse ball cover on the back of the mouse by turning
clockwise the ring that covers the mouse ball.
3
4
Turn the mouse upright, and drop the mouse ball into your hand.
Using a piece of tape, remove any dust or dirt on the mouse ball and
inside the mouse ball socket.
5
Return the mouse ball to the socket, and replace the mouse ball cover.
Secure the cover by turning the ring counter-clockwise.
Topic: My mouse needs to be set up for left-hand use.
1
2
Click the My Computer icon on your desktop.
Click Control Panel, and then click Mouse.
The Mouse Properties dialog box appears.
In the Quick Setup tab, click Device Setup.
In the Device Setup Wizard dialog box, click Next.
Select the radio button next to “Left side of the keyboard.”
Click Next three times, and then click Finish.
Click Apply.
3
4
5
6
7
Topic: My keyboard does not work.
Check that the keyboard is plugged into the KEYBOARD connector.
Topic: I cannot find the Windows® taskbar.
❑
❑
Check that the taskbar is not hidden or shrunken.
Use the mouse to point to the left, right, top, and bottom edges of the screen.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Topic: Why is my system running slowly?
❑
The system responsiveness varies depending on the number of applications
that are open and running. Close any applications that you are not currently
using.
❑
Increasing the system memory may also help. The computer has two
memory slots. For memory upgrades, use only 3.3V 64-bit PC-100 (PC-133
for R556/R558) SDRAM DIMM modules. For information on installing
memory, please see the online document Upgrading and Maintaining Your
VA I O ® Computer.
Sony computer supplies, accessories and peripherals can be purchased from your
Topic: My i.LINK® peripheral does not appear on the desktop.
1
2
3
Turn off and disconnect your peripheral.
Reconnect your peripheral.
Then turn on the power.
Topic: My connected printer doesn't function after the computer resumes
from a power saving mode.
When this occurs, follow the procedures below to reset the printer connection:
1
Right-click the My Computer icon on the desktop, and then select
Properties.
2
3
4
Click the Device Manager tab.
Select Refresh, and then click OK.
The printer should now function properly.
Topic: How do I enable my Ethernet interface?
1
2
3
Right-click My Computer on the desktop and select Properties.
Click the Device Manager tab.
Select “Realtek RTL8139 (A/B/C/8130) PCI Fast Ethernet NIC” under the
Network Adapters category.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
4
5
6
Click Properties.
Click Enable Device and then click OK.
Click Close.
Topic: How do I install a printer?
✍ Always check the printer manufacturer's website for the latest drivers for Windows
98 before proceeding. Some printers do not function properly without updated
drivers for Windows 98.
✍ If the printer has a USB connection, do not follow the steps below. Have the
customer contact the manufacturer of their printer as they may have updates, other
devices, or other information that the customer may need.
1
2
3
4
5
From the Start menu, select Settings > Printers.
Click Add Printer.
Click Next.
Select Local Printer and click Next.
Select the appropriate manufacturer and model and click Next.
✍ If the printer is not included in the list and the printer manufacturer included a
disk with a Windows 98 Printer driver, choose Have Disk, enter the appropriate
path for the disk or CD and click OK.
If the printer is not included on the list and no drivers are included with the
printer, choose a driver for a printer that the printer emulates (acts like). Refer to
the printer user's manual for specific emulation information.
6
7
8
9
Select LPT1 and click Next.
Click Yes to have Windows-based programs use this as the default printer.
Click Next.
Click No and then click Finish.
✍ If prompted for a path to the windows files, use C:\Windows\Options\Cabs.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Use
Topic: Why is there unusual activity on my floppy disk drive?
If you notice that your system is slow to respond due to unusual floppy disk drive
activity, it could be due to Find Fast. Removing Find Fast, if present, may help.
1
Right-click on the Windows taskbar and select Properties.
The Taskbar Properties dialog box appears.
Click the Start Menu Programs tab.
Click the Remove button.
2
3
The Remove Shortcuts/Folders dialog box appears.
Click on Startup to see its list of shortcuts.
Click Microsoft Find Fast.
4
5
6
7
8
Click the Remove button.
Click Close.
Click OK.
To Reach Sony
For further assistance, call 1-888-4SONYPC (1-888-476-6972).
Notes on Use
On the Power Source
❑
Your computer operates on 100–120 V AC 50/60 Hz only. If you are
operating this computer outside of North America or Japan, please verify
that the local AC specifications match before plugging in the computer.
❑
The total power draw of installed add-in cards must not exceed the
specifications for the power supply. Do not overload the system by installing
add-in cards that draw excessive current. The system is designed to provide 2
amps (average) of 5V power for each card in the system not to exceed a total
of 10 amps. The total from +5V current draw in a fully-loaded system (with
all the add-in card slots filled) must not exceed 10 amps. If you add
components to the system that draw current from the power supply, the
maximum combined +3.3V and +5V output must not exceed 70 watts.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
Plug all the power cords for your computer and its peripheral equipment into
the same AC supply line. AC derived from different supply lines may result
in voltage differences that can cause unstable operation or unwanted weak
currents at the time of connection.
❑
❑
Do not share the AC outlet with any other power-consuming equipment,
such as copying machines or shredders.
You can purchase a power strip with a surge protector. This device prevents
damage to your computer caused by sudden power surges such as those that
may occur during an electrical storm.
❑
❑
If you live in an area that experiences frequent power fluctuations, you may
want to purchase a UPS (Uninterrupted Power Supply). This device contains
both a surge protector and a battery backup. The surge protector prevents
damage to your computer caused by power surges. The battery backup
safeguards your data during a brief period of power loss.
The power control button on the front panel does not turn off the system AC
power. To remove power from the system, you must shut down the computer
as described in the User Guide and then unplug the AC power cord from the
wall outlet or power strip.
❑
❑
Do not place heavy objects on the power cord.
Do not operate the system with the cover removed. Always reinstall the
cover before turning on the system.
❑
❑
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
Unplug your computer from the wall outlet if you will not be using the
computer for a long time.
❑
❑
Before touching anything inside the computer, turn the system off and let it
cool for ten minutes. This will ensure that the processor heat sink will not be
hot.
Do not attempt to open the power supply. There are no user-serviceable parts
in the power supply. To avoid personal injury or damage to your equipment,
refer the repair or replacement of the power supply to qualified personnel
only.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Use
On Disposal of the Lithium Battery
Dispose of the lithium battery properly. In some areas, the disposal of lithium
batteries in household or business trash may be prohibited. You can return your
unwanted lithium batteries to your nearest Sony Service Center or Factory
Service Center. For the Sony Service Center nearest you, call 1-888-4SONY-PC
(1-888-476-6972).
!
!
Do not handle damaged or leaking lithium batteries.
The lithium battery may explode if mistreated. Do not disassemble it or
dispose of it in fire.
!
Replace the battery with a Sony CR2032 lithium battery. Using a type of
battery other than a CR2032 may present a risk of fire or explosion.
On Handling
❑
Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with
a mild detergent solution. Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine, as it may damage the finish of
your Sony computer.
❑
Should any solid object or liquid fall into the cabinet, keyboard, or mouse,
shut down your computer and then unplug it. You may want to have the
computer checked by qualified personnel before operating it any further.
On Installation
Do not place your Sony computer in a location subject to:
❑
❑
❑
❑
❑
❑
❑
❑
Heat sources, such as radiators or air ducts
Direct sunlight
Excessive dust
Mechanical vibration or shock
Strong magnets or speakers that are not magnetically shielded
Ambient temperature of more than 95ºF (35ºC) or less than 50ºF (10ºC)
High humidity, moisture, or rain
❑
Do not place electronic equipment near your computer. The computer’s
electromagnetic field may cause a malfunction.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
Provide adequate air circulation to prevent internal heat build-up. Do not
place your computer on loose surfaces (such as rugs or blankets) or near
materials (such as curtains or draperies) that may block its ventilation slots.
Leave a space of at least 8 inches from the back panel of your computer.
❑
❑
The computer uses high-frequency radio signals and may cause interference
to radio or TV reception. Should this occur, relocate the computer a suitable
distance away from the set.
Use only specified peripheral equipment and interface cables; otherwise,
problems may result.
❑
❑
Do not use cut or damaged connection cables.
Always switch the power off before connecting your computer to peripheral
equipment; otherwise, damage may occur to the integrated circuits in your
computer.
❑
❑
Your computer, keyboard, and mouse consist of high-precision electronic
parts. Do not drop them or bump them against other objects.
Your Sony computer will not work with party lines, cannot be connected to a
coin-operated telephone, and may not work with multiple phone lines or a
private branch exchange (PBX).
❑
If the telephone company makes a service call to your home or office and
determines that your computer is responsible for the problem, the telephone
company may bill you for the service call. Also, if you do not disconnect
your computer when it is adversely affecting the telephone line, the
telephone company has the right to disconnect your service until you correct
the problem.
On Moisture Condensation
If your computer is brought directly from a cold location to a warm one, moisture
may condense inside your computer. In this case, allow at least an hour before
turning on your computer. If any problem occurs, unplug your computer, and
contact your Sony Service Center.
On Upgrading the System
❑
The procedures described in the online document “Upgrading and
Maintaining Your VAIO® Computer” assume familiarity with the general
terminology associated with personal computers and with the safety
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on Use
practices and regulatory compliance required for using and modifying
electronic equipment.
❑
❑
Disconnect the system from its power source and from any
telecommunications links, networks, or modems before you open the system
or follow any of the procedures described in the online document
“Upgrading and Maintaining Your VAIO® Computer” . Failure to do so may
result in personal injury or equipment damage.
Electrostatic discharge (ESD) can damage disk drives, add-in cards, and
other components. Follow the procedures described in the online document
“Upgrading and Maintaining Your VAIO® Computer” only at an ESD
workstation. If such a station is not available, do not work in a carpeted area,
and do not handle materials that produce or hold static electricity
(cellophane wrappers, for example). Ground yourself by maintaining contact
with an unpainted metal portion of the chassis while performing the
procedure.
❑
❑
❑
❑
When removing a slot cover, be careful not to damage components on the
system board or add-in cards. You may need to temporarily remove add-in
cards that are next to the slot cover you want to remove.
Using the computer in low temperature conditions may produce a residual
image on the screen. This is not a malfunction. When the computer returns to
normal temperature, the screen returns to normal.
A residual image may appear on the screen if the same image is displayed
for a lengthy period of time. The image disappears after a period of time.
You can use a screen saver to prevent residual images.
The screen becomes warm during operation. This is normal and does not
indicate a malfunction.
On Handling a CRT Display
❑
❑
Do not place the display near a strong magnetic force.
Do not block the ventilation slots on the display.
On Using the Hard Disk Drive
❑
❑
❑
Do not place the computer in a location that is subject to vibration or shock.
Do not move the computer during operation.
Do not subject the computer to sudden changes in temperature.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
❑
Do not turn off the power while the computer is accessing the hard disk
drive.
On Handling Diskettes
❑
❑
❑
Do not open the shutter manually and touch the surface of the diskette.
Keep diskettes away from magnets.
Keep diskettes away from direct sunlight and other heat sources.
On Handling CD or DVD Media
❑
❑
Do not touch the surface of the disc.
Do not drop or bend the disc.
On Cleaning CD or DVD Media
❑
Fingerprints and dust on the surface of a disc may cause read errors. Proper
care of the disc is essential to maintain its reliability. Do not use solvents
such as benzine, thinner, commercially available cleaners or anti-static spray,
as they may cause damage to the disc.
❑
❑
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the
surface from the center out.
If the disc is badly soiled, moisten a soft cloth with water, wring it out well,
and use it to wipe the surface of the disc from the center out. Wipe off any
remaining moisture with a dry soft cloth.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Resources
Resources
Sony provides several support options for your Sony computer. When you have
questions about your computer and the preinstalled software, check these sources
for answers, in the following sequence:
Contains information on how to set up your computer
quickly and easily.
1
2
Quick Start
User Guide
Contains information on how to get the most from your
computer, find help, and solve common problems. Also
includes product specifications.
QuickStart and the User Guide are available electronically
on your hard drive. Two additional documents, “Upgrading
and Maintaining Your VAIO Computer” and
3
Electronic
Documentation
®
Troubleshooting Help are also available. To access these
documents, click the Start button, point to Help Center, and
then point to the desired document.
Most manuals for preinstalled software are located on your
hard disk drive as online help files. You can access online
help files from the Help menu in a specific application. A
printed manual is available for some applications.
4
Manuals and online
help files that may
accompany your
preinstalled
software
Provides instant access to information on commonly
encountered problems. Enter a description of your problem
and the Knowledge Database searches for the corresponding
solutions online. You can access the Sony Knowledge
5
6
Knowledge
Database
This service provides you with answers to commonly asked
questions. You can use this automated service to request a
list of available topics and then select the topics that you
want to receive. To contact the Sony fax-on-demand service,
call 1-888-4SONYPC (1-888-476-6972). (Requires a fax
machine or fax software.)
Sony Fax-on-
Demand
You can download the latest software updates and software
patches for your Sony computer by selecting Software
Updates on the Sony PC Support web page at http://
7
8
Software Updates
Provides detailed technical information about your
computer's hardware. This document is available from
VAIO Computer
Reference Manual
51
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
For Answers to Your Software Questions
Sony Service Center
For the Sony Service Center nearest you, call 1-888-4SONYPC (1-888-476-
6972). This service is free of charge for 90 days after the original date of
purchase.
Acrobat® Reader, Adobe PhotoDeluxe®, Adobe Premiere® LE (Adobe
Systems Incorporated)
Web site
phone
fax
206-628-2746 (fee-based support)
206-628-5737
e-mail
hours
M - F, 6 AM - 5 PM PT
America Online® (America Online)
Web site
phone
800-827-3338
hours
7 days a week, 6 AM - 2 PM ET
AT&T WorldNet® Service (AT&T)
*
Web site
phone
e-mail
hours
800-400-1447
7 days a week, 24 hours a day
* You must be a WorldNet Service customer to access online support.
CompuServe® 2000 (CompuServe Interactive Services)
Web site
phone
800-848-8990
52
Download from Www.Somanuals.com. All Manuals Search And Download.
For Answers to Your Software Questions
DirectCD, Easy CD Creator™ (Adaptec, Inc.)
Web site
phone
408-945-8600
hours
M - F, 8AM - 5 PM PT
EarthLink TotalAccess™(EarthLink Network, Inc.)
Web site
phone
e-mail
hours
800-395-8410
7 days a week, 24 hours a day
McAfee’s VirusScan® (Network Associates, Inc.)
Web site
phone
e-mail
hours
408-988-3832
M - F, 9 AM - 5 PM CT
PhotoPrinter™ 2000 Pro (ArcSoft, Inc.)
Web site
phone
e-mail
hours
510-440-9901
M - F, 8:30 AM - 5:30 PM PT
Quicken® Basic (Intuit, Inc.)
Web site
phone
900-555-4688
hours
7 days a week, 24 hours a day
Sony Applications (Sony Electronics, Inc.)
Web site
phone
*
888-4SONYPC (888-476-6972)
7 days a week, 24 hours a day
hours
* Support from 1-888-4SONYPC is free of charge for 90 days after the original date of purchase.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Sound Forge® (Sonic Foundry)
Web site
phone
fax
608-256-5555
608-256-7300
e-mail
hours
M - F, 8 AM - 7 PM CT
Windows® 98 Second Edition Operating System, Internet Explorer,
Outlook® Express, Word 2000 (Microsoft Corporation)
Web site
phone
*
888-4SONYPC (888-476-6972)
7 days a week, 24 hours a day
hours
* Support from 1-888-4SONYPC is free of charge for 90 days after the original date of purchase.
WinFax™ Basic Edition (Symantec Corporation)
Web site
phone
fax
800-798-0850
800-554-4403 in North America
541-984-2490 outside North America
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications PCV-R553DS
Specifications PCV-R553DS
Model
PCV-R553DS
*
®
Processor
Hard Disk Drive
650 MHz Pentium III
†
30 GB
Standard
SDRAM
128 MB PC-100 SDRAM,
expandable to 256 MB
Video RAM
MPEG
Shared with system memory
“Sony Tuned” MPEG Digital Video supports full-screen
video playback
Graphics
Intel 810
Sound Capabilities
Diskette Drive
CD-RW Drive
Yamaha AC-XG Audio
3.5” 1.44 MB FDD
32X max. CD-ROM reading,
8X max. CD-R writing,
32X max. CD-R reading,
4X max. CD-RW writing,
20X max. CD-RW reading
‡
DVD-ROM Drive
Modem
16X max. DVD-ROM (40X max. CD-ROM)
Lucent 1648 technology/V.90 compatible data/fax
**
modem (REN 0.7)
Expansion Capabilities
HDD bay
Connection Capabilities (Front) USB port
i.LINK port (4-pin)
Connection Capabilities (Rear) USB port
PS/2 (2)
VGA Monitor port
Serial port
Parallel (printer)
Game/MIDI
Headphones
Line In
Microphone
i.LINK (6-pin)
Modem line (RJ-11)
Phone line (RJ-11)
10Base-T/100Base-TX Fast Ethernet LAN (RJ-45)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Model
PCV-R553DS
Supplied Accessories
VAIO Smart Keyboard
PS/2 Wheel Mouse
Speakers (SRS- Z050V)
Power cord
Modem cable
††
Service
90-day limited service. See Warranty Card.
‡‡
Limited Warranty
Power Requirements
Voltage
90-day parts/labor standard. See Warranty Card.
200 watts maximum
100-120V~3A
Dimensions
8.6”(w) x 14”(h) x 15.5”(d) (220mm x 358mm x
394mm)
Weight
25.3lbs (11.5kg)
Operating Temperature
50ºF to 95ºF (+10ºC to 35ºC)
* MHz denotes microprocessor internal clock speed; other factors may affect application
performance.
† GB means one billion bytes when referring to hard drive capacity. Accessible capacity may vary.
‡ The DVD-ROM data transfer standard 1X rate is 1385 kbytes/s.
Data on a DVD-ROM is read at a variable transfer rate, ranging from 6.6X at the innermost track to
16X at the outermost track. The average data transfer rate is 11.3X(15255 kbytes/s).
The CD-RW/CD-R/CD-ROM data transfer standard 1X rate is 150 kbytes/s.
Data on a CD-RW is read at a variable transfer rate, ranging from 8X at the innermost track to 20X
at the outermost track. The average data transfer rate is 14X(2100 kbytes/s).
Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 13X at the innermost track
to 32X at the outermost track. The average data transfer rate is 22.5X(3375 kbytes/s).
Data on a CD-RW/CD-R is written at a constant transfer rate of 1X, 2X, 4X (max for CD-RW), or
8X depending on the speed you select.
**Maximum speed for faxing is 14.4 kbytes/s. Your modem is capable of downloading at 56 kbytes/s
using K56flex technology or V.90. Your phone service, online service, or Internet Service Provider,
however, may not support this technology or operate at this speed.
††Certain restrictions apply
‡‡Certain restrictions apply
Specifications are subject to change without notice.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications PCV-R556DS/R558DS
Specifications PCV-R556DS/R558DS
Model
PCV-R556DS/PCV-R558DS
*
®
†
®
Processor
Hard Disk Drive
733 MHz Pentium III/866 MHz Pentium III
‡
30 GB/40 GB
Standard
SDRAM
128 MB PC-133 SDRAM,
expandable to 256 MB
Video RAM
MPEG
16 MB SDRAM
“Sony Tuned” MPEG Digital Video supports full-screen
video playback
Graphics
NVIDIA RIVA TNT2 Pro 4X AGP
Yamaha AC-XG Audio
Sound Capabilities
Diskette Drive
CD-RW Drive
3.5” 1.44 MB FDD
32X max. CD-ROM reading,
8X max. CD-R writing,
32X max. CD-R reading,
4X max. CD-RW writing,
20X max. CD-RW reading
**
DVD-ROM Drive
Modem
16X max. DVD-ROM (40X max. CD-ROM)
Lucent 1648 technology/V.90 compatible data/fax
††
modem (REN 0.7)
Expansion Capabilities
HDD bay
Connection Capabilities (Front) USB port
i.LINK port (4-pin)
Connection Capabilities (Rear) USB port (2)
PS/2 (2)
VGA Monitor port
Serial port
Parallel (printer)
Game/MIDI
Headphones
Line In
Microphone
i.LINK (6-pin)
Modem line (RJ-11)
Phone line (RJ-11)
10Base-T/100Base-TX Fast Ethernet LAN (RJ-45)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
VAIO Digital Studio™ Computer User Guide
Model
PCV-R556DS/PCV-R558DS
Supplied Accessories
VAIO Smart Keyboard
PS/2 Wheel Mouse
Speakers (SRS- Z050V)
Power cord
Modem cable
i.LINK cable (PCV-R556DS/PCV-R558DS only)
‡‡
Service
90-day limited service. See Warranty Card.
***
Limited Warranty
Power Requirements
Voltage
90-day parts/labor standard. See Warranty Card.
200 watts maximum
100-120V~3A
Dimensions
8.6”(w) x 14”(h) x 15.5”(d) (220mm x 358mm x
394mm)
Weight
25.3lbs (11.5kg)
Operating Temperature
50ºF to 95ºF (+10ºC to 35ºC)
* MHz denotes microprocessor internal clock speed; other factors may affect application
performance.
† MHz denotes microprocessor internal clock speed; other factors may affect application
performance.
‡ GB means one billion bytes when referring to hard drive capacity. Accessible capacity may vary.
**The DVD-ROM data transfer standard 1X rate is 1385 kbytes/s.
Data on a DVD-ROM is read at a variable transfer rate, ranging from 6.6X at the innermost track to
16X at the outermost track. The average data transfer rate is 11.3X(15255 kbytes/s).
The CD-RW/CD-R/CD-ROM data transfer standard 1X rate is 150 kbytes/s.
Data on a CD-RW is read at a variable transfer rate, ranging from 8X at the innermost track to 20X
at the outermost track. The average data transfer rate is 14X(2100 kbytes/s).
Data on a CD-R/CD-ROM is read at a variable transfer rate, ranging from 13X at the innermost track
to 32X at the outermost track. The average data transfer rate is 22.5X(3375 kbytes/s).
Data on a CD-RW/CD-R is written at a constant transfer rate of 1X, 2X, 4X (max for CD-RW), or
8X depending on the speed you select.
††Maximum speed for faxing is 14.4 kbytes/s. Your modem is capable of downloading at 56 kbytes/s
using K56flex technology or V.90. Your phone service, online service, or Internet Service Provider,
however, may not support this technology or operate at this speed.
‡‡Certain restrictions apply
***Certain restrictions apply
Specifications are subject to change without notice.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
computer
adjusting voltage settings 45
A
AC input connector 16
adding additional hardware
precaution 46
condensation and 48
disposing of battery 47
lithium ion battery 7
removing cover 46
precautions 47
shutting down 46
starting
adjusting voltage settings 45
air circulation 48
Application Recovery CD 31, 33
applications
launching
problems with 37
problems with 34
upgrading 48
B
back panel overview 14
battery
power cords 45
precautions 48
disposing 47
C
cables 48
CD drives
troubleshooting 36
CD tray
defragmenting 27
digital video 26
opening
problems with 36
CD-RW drive 13
choosing locations 11, 47
cleaning
disconnecting power cords 46
diskettes
handling 50
displaying the taskbar
problems with 42
computer 47
mouse 42
59
Download from Www.Somanuals.com. All Manuals Search And Download.
displays
headphones connector 16
problems with 34
setting up 11
disposal of lithium ion battery 7
DVD drive 13
I
i.LINK compatibility 28
i.LINK devices, connecting 28
DVgate 26
E
eject button, for floppy disk 13
eject hole, for DVD 13
electronic
installing additional hardware
precaution 46
interference 48
documentation 51
equipment 47
Ethernet 30
Ethernet connector 16
European power settings 45
keyboard 11
troubleshooting 42
F
launching applications
problems with 37
disposal 7
safety precautions 7
floppy disk drive 13
front panel overview 12
G
games/MIDI connector 16
glare 12
H
handling diskettes 50
hard disk 49
M
hard drive partition 27
hardware
Media Park applications 20
microphone connector 15
microphones
adding additional
precaution 46
troubleshooting 41
troubleshooting 34, 42
minimizing glare 12
60
Download from Www.Somanuals.com. All Manuals Search And Download.
modem
troubleshooting 39
monitor connector 16
mouse 11
R
radio interference 48
reducing glare 12
removing computer cover 46
cleaning 42
troubleshooting 42
Movie Shaker 21
S
selecting
O
online
help 51
support options 51
opening
serial connector 16
setting up your computer
precautions 47
shutting down your computer 46
Sony Fax-on-Demand service 51
Sony Multimedia Computer Display
applications
problems with 37
CD tray
problems with 36
speakers
troubleshooting 34
System Recovery CD 31
P
palmrest 11
Panorama Maker 24
phones
service precautions 48
PictureGear 20, 24
power cords 45
disconnecting 46
power fluctuations or loss 46
power indicator
on system unit 13
power source, precautions 45–46
power switch 13
Pre-setting i.LINK devices 18
printer connector 16
problem solving 34
T
taskbar
problems viewing 42
61
Download from Www.Somanuals.com. All Manuals Search And Download.
technical support
support options 51
telephone jack 15
troubleshooting 34
turning off your computer 46
turning on and off the computer 13
turning on your computer
problems with 34
TV interference 48
U
Universal Serial Bus (USB)
connector 16
upgrading your computer 48
UPS (Uninterrupted Power
Supply) 46
V
VAIO Action Setup 17
ventilation 11, 48
viewing the taskbar
problems with 42
voltage settings 45
W
window design of Sony software
changing 19
Windows taskbar
problems viewing 42
work surfaces 11
62
Download from Www.Somanuals.com. All Manuals Search And Download.
|