Sony PDAs Smartphones PEG TJ25 User Manual

3-087-353-12 (1)  
Setting up your  
CLIÉ™ handheld  
1
2
3
Basic operations of  
your CLIÉ™ handheld  
Using CLIÉ Manuals  
with your computer  
Read  
This  
Troubleshooting  
CLIÉ™ handheld  
components  
First  
Operating Instructions  
Personal Entertainment Organizer  
PEG-TJ35  
PEG-TJ25  
© 2003 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before use  
Caution  
IN NO EVENT SHALL SONY BE LIABLE FOR  
ANY INCIDENTAL, INDIRECT OR  
CONSEQUENTIAL DAMAGES OR OTHER  
DAMAGES INCLUDING WITHOUT  
LIMITATION LOSS OF PROFITS, LOSS OF  
REVENUE, LOSS OF DATA, LOSS OF USE  
OF THE PRODUCT OR ANY ASSOCIATED  
EQUIPMENT, DOWNTIME, AND  
PURCHASER’S TIME RELATED TO OR  
ARISING OUT OF THE USE OF THIS  
PRODUCT, ITS HARDWARE AND/OR ITS  
SOFTWARE.  
On the supplied software  
• Copyright laws prohibit reproducing the  
software or the software manual in whole or  
in part or renting the software without the  
permission of the copyright holder.  
• In no event will SONY be liable for any  
financial damage or loss of profits, including  
claims made by third parties, arising out of  
the use of the software supplied with this  
product.  
• In the event a problem occurs with this  
software as a result of defective  
manufacturing, SONY will replace it at  
SONY’s option or issue a refund. However,  
SONY bears no other responsibility.  
• The software provided with this product  
cannot be used with equipment other than  
that which it is designated for use with.  
• Please note that, due to continued efforts to  
improve quality, the software specifications  
may be changed without notice.  
• The software library incorporated in the  
CLIÉ handheld is based in part on the work of  
the Independent JPEG Group.  
NOTES  
• Sony does not support third party add-on  
applications. If you have a problem with a  
third party application, please contact the  
developer or publisher of that software.  
• The illustrations in this manual may differ  
from the actual software.  
• Explanations in this manual assume that you  
are familiar with basic operations of  
®
Windows . For how to use your computer  
and operating system, please refer to their  
respective manuals.  
Program © 2003 Sony Corporation, © 2003  
PalmSource, Inc., or its subsidiaries. All rights  
reserved.  
Documentation © 2003 Sony Corporation  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Restarting your CLIÉ™  
Confirming the package  
contents . . . . . . . . . . . . . . . . 6  
computer  
Setting up your CLIÉ™  
handheld . . . . . . . . . . . . . . . . 8  
Opening CLIÉ Manuals . . . . . . . . . . . . . . . . 37  
Reading the PDF manuals on your  
computer. . . . . . . . . . . . . . . . . . . . . . . . . 38  
Step 2: Performing the initial setup after  
for the first time. . . . . . . . . . . . . . . . . . . . . 9  
(CLIÉ Application Manual). . . . . . . . . . . . 39  
Step 1: Installing the software on your  
Step 2: Registering your CLIÉ handheld. . . . 17  
Frequently Asked Questions. . . . . . . . . . . . . 42  
computer via the USB cable. . . . . . . . . . . 18  
Customer Support and  
Customer Registration. . . . . . . . . . . . . . . 52  
Step 4: Entering a user name for your CLIÉ  
Installing the supplied applications  
CLIÉ™ handheld components  
Front panel. . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Back panel . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
handheld  
Locating the components of the CLIE  
Launcher . . . . . . . . . . . . . . . . . . . . . . . . . 65  
handheld . . . . . . . . . . . . . . . .21  
INDEX. . . . . . . . . . . . . . . . . . . .70  
Using the Jog Dial™ navigator and  
/
Other ways to start an application . . . . . . . . 24  
®
Using Graffiti 2 writing to enter text. . . . . . 26  
Other ways to enter text . . . . . . . . . . . . . . . . 28  
Synchronizing data between your  
CLIÉ handheld and computer  
(the HotSync® operation). . . . .29  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on this manual  
• This manual supports PEG-TJ35 and PEG-TJ25.  
– The illustrations in this manual are for PEG-TJ35, unless specified otherwise.  
– Differences between PEG-TJ35 and PEG-TJ25 are specified in each corresponding  
section.  
• Screen shots in this manual may be different from the actual displays in the supplied  
software.  
• The contents of this manual are written for users with a working knowledge of  
®
Windows . For details on computer operations, refer to your computer manual.  
About LCD display  
The LCD of your CLIÉ handheld is designed with precision technology. However, in  
some cases, individual pixels may remain lit or may not light at all. Also, the brightness  
of the display may appear inconsistent, depending on the angle of view. Such anomalies  
are caused by the nature of the LCD and do not indicate a malfunction.  
Please note that Sony does not guarantee a replacement or refund for such cases.  
Do not expose the LCD to direct sunlight for prolonged periods of time. It may result in  
a malfunction. Do not store your CLIÉ handheld in areas subject to sunlight, such as near  
windows, and be careful when using outdoors.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your  
CLIÉ™ handheld  
This chapter explains how to charge your CLIÉ handheld, perform the initial setup, and use  
it with your computer.  
Confirming the package contents  
Please confirm that all the following accessories are included in the package before  
setting up your CLIÉ handheld.  
CLIÉ handheld (1)  
AC power adapter (1)  
(including AC cord)  
USB cable (1)  
Stylus (1)  
The stylus is inserted into your CLIÉ  
handheld at the factory.  
Plug adapter (1)  
Protective soft cover (1)  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Installation CD-ROM (1)  
Strap (1)  
Refer to the illustration below to attach the strap.  
Read This First - Operating Instructions (1, this manual)  
Safety & Regulations Guide (1)  
Software license agreement (1)  
Graffiti 2 Card (1)  
Other printed materials  
Make sure that the package contains all of the above contents. If any item is missing,  
contact the Sony Customer Information Service Center or a Sony dealer.  
Use the strap to avoid dropping your CLIÉ handheld  
Attaching the strap  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your CLIÉ™ handheld  
Perform the following before setting up your CLIÉ handheld.  
Step 1: Charging your CLIÉ handheld  
Before using your CLIÉ handheld for the first time,  
make sure to fully charge the battery.  
To a wall  
outlet  
1
2
3
Connect the AC power adapter to the DC IN connector of  
the plug adapter.  
Connect the plug adapter to the interface connector of  
your CLIÉ handheld .  
Connect the AC cord to the AC power adapter (1). Then,  
plug the AC cord into a wall outlet (2).  
The POWER LED of your CLIÉ handheld turns on when charging starts.  
It takes about four hours to fully charge your CLIÉ handheld for the first time.  
The POWER LED turns off when charging is complete.  
Tip  
Subsequent charges will require less time if you charge your CLIÉ handheld  
frequently.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Note  
If the battery of your CLIÉ handheld is completely discharged, all user data stored  
on your CLIÉ handheld will be lost.  
How to remove the plug adapter  
Remove by pressing the plug adapter on both sides as illustrated.  
Step 2: Performing the initial setup after  
turning on your CLIÉ handheld for  
the first time  
The first time you turn on your CLIÉ handheld, you need to make some initial  
settings. Follow the on-screen instructions to complete the initial setup and to  
become familiar with operations of your CLIÉ handheld.  
1
Slide down the POWER/HOLD switch.  
Your CLIÉ handheld turns on, and the Setup screen is displayed.  
b
Slide down the POWER/HOLD switch  
Continued on next page  
• • • • • • • • • • • • • • •9• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Tips  
If you cannot turn on your CLIÉ handheld  
Did you charge your CLIÉ handheld as described on page 8?  
b For details, refer to “Frequently Asked Questions: I cannot turn on my  
CLIÉ handheld” on page 44.  
Perform a soft reset if you cannot turn on your CLIÉ handheld even after  
charging it (page 32).  
2
Take out the stylus.  
You can use the stylus to enter text  
Take out the stylus  
or to select applications.  
Tip  
You can extend or shorten the  
stylus, as shown in the  
illustration.  
Notes  
Never use a writing pen, pencil, or other sharp object instead of the stylus to  
write on your CLIÉ handheld, as the screen may get scratched.  
When you put the stylus back in its holder, push it in until it clicks into place.  
3
Press lightly on the screen with the stylus.  
This action is called “tapping”.  
The Setup screen for stylus digitizer is displayed.  
b
Press lightly on the screen (Tap)  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
Following the on-screen instructions, tap exactly in the  
center of the displayed mark.  
Tap the next targets, which are displayed at the bottom right and then in the  
center of the screen.  
Note  
If the stylus digitizer is not configured correctly, the scroll bar may not operate  
properly, “tapping” may not work as expected, or other problems may occur.  
b For details on reconfiguring the stylus digitizer, refer to “Customizing your  
CLIÉ™ handheld (Preferences): Adjusting the Digitizer” in “Handbook”  
(PDF format).  
After the stylus adjustment is complete, a screen for setting the time and  
date is displayed.  
5
6
Tap the box next to [Set Time:].  
The Set Time dialog box is displayed.  
Tip  
You can reconfigure the date and time  
settings in the Preferences screen.  
b For details, refer to “Customizing your  
CLIÉ™ handheld (Preferences): Setting  
up the Date & Time preferences” in  
“Handbook” (PDF format).  
Tap v or V to set the current time.  
Tap each box to set the hour and  
minute.  
Continued on next page  
• • • • • • • • • • • • • •11• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7
8
Tap [OK].  
The current time is set and the  
Setup screen is displayed.  
Tap the box next to [Set Date:].  
The Set Date screen is displayed.  
9
Tap b or B to select the current year.  
10  
11  
Tap the current month, then tap the current date.  
The Set Date screen closes.  
Tap the box next to [Time Zone:].  
The Set Time Zone screen is displayed.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
12  
13  
14  
Tap the region to set the time zone, then tap [OK].  
Tap V next to [Daylight Saving:] and select [On] or [Off].  
Tap [Next].  
Continued on next page  
• • • • • • • • • • • • • •13• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Tap [Next] and [Done].  
b
The CLIE Launcher is displayed.  
The initial setup is complete.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using your CLIÉhandheld with your computer  
Palm™ Desktop for CLIÉ stored on the supplied Installation CD-ROM  
must be installed on your computer. The software is used for data transfer  
between your CLIÉ handheld and computer, and handling data on your  
computer such as Address Book.  
b For details on the system requirements of computer, refer to “System requirements”  
on page 58.  
When Palm™ Desktop for CLIÉ is installed on your computer, CLIÉ  
Manuals is also installed on your computer.  
b For details on CLIÉ Manuals, refer to “Using CLIÉ Manuals with your computer”  
(page 35).  
Step 1: Installing the software on your  
computer  
Do not connect your CLIÉ handheld to your computer  
before installing the software. Otherwise, the  
software may not be installed properly.  
Notes  
Do not simply copy the Palm™ Desktop for CLIÉ folder from the supplied  
Installation CD-ROM to your computer. To install the software properly, follow  
the installation procedure described below.  
If you use Windows 2000 Professional or Windows XP, log on with a User Name  
in the Administrators group before installing the software.  
If you have more than one CLIÉ handheld and the older version of Palm™  
Desktop for CLIÉ has already been installed on your computer, follow the  
installation procedure below to upgrade to the new version.  
* If you are using PEG-N710C Series or PEG-S300 Series, refer to your CLIÉ  
handheld support website. (Refer to the URL shown on the back cover of this  
manual.)  
b For details, refer to “Transferring data from another CLIÉ™ handheld” in  
“Handbook” (PDF format).  
Continued on next page  
• • • • • • • • • • • • • •15• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Quit all applications running on Windows®.  
1
2
Insert the supplied Installation CD-ROM into the CD-ROM  
drive of your computer.  
The Installation CD-ROM window is displayed.  
3
Click [Next] or [CLIÉ Basic], then click [Install] to install  
Palm™ Desktop for CLIÉ.  
The setup program starts and the InstallShield Wizard window is  
displayed.  
Note  
If you try to install Palm™ Desktop for CLIÉ when an older version of  
Palm™ Desktop for CLIÉ has already been installed on your computer, a  
dialog box appears on your computer window.  
Follow the instruction of the dialog box to install the new version of Palm™  
Desktop for CLIE supplied with your CLIÉ handheld.  
4
5
Click [Next].  
The InstallShield Wizard window for [Setup Type] is displayed.  
Select the setup type, [Complete] or [Custom].  
When you select [Custom], you need to specify which software you want  
to install and where to be installed.  
The following steps explain when you select [Complete].  
6
7
Click [Next].  
The InstallShield Wizard window for [Select User] is displayed.  
Enter a user name and click [Next].  
The InstallShield Wizard window for [Ready to Install the Program] is  
displayed after entering any user name you prefer.  
Note  
If you have more than one CLIÉ handheld  
Enter a user name that is different from the one you use for another CLIÉ  
handheld.  
If you set an identical user name for multiple CLIÉ handhelds, errors may occur.  
Tip  
If you want to transfer data between CLIÉ handhelds  
Refer to “Transferring data from another CLIÉ™ handheld” in “Handbook”  
(PDF format).  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8
9
Click [Install].  
Installation of Palm™ Desktop for CLIÉ starts.  
“InstallShield Wizard Completed” message is displayed in the  
InstallShield Wizard window when the installation is complete.  
Click [Finish].  
The Sony CLIÉ Handheld Registration window is displayed for  
models for the U.S.A. and Canada only.  
Tip  
If you do not want to sign up for the customer service, click  
[Register your CLIÉ].  
to deselect  
Installation of Palm™ Desktop for CLIÉ on your computer  
is complete.  
If you want to register your CLIÉ handheld, go to “Step 2:  
Registering your CLIÉ handheld”.  
Step 2: Registering your CLIÉ handheld  
You can register your CLIÉ handheld after installing Palm™ Desktop for  
CLIÉ by following the on-screen instructions.  
With your permission, Sony will keep you informed of special opportunities.  
Also, your registration information helps Sony assist you if you call for  
customer support.  
All of the information you provide is confidential.  
Note  
To register your CLIÉ handheld online, you need to have an access to the Internet.  
Tip  
If you want to register your CLIÉ handheld later, click  
at the right top of the  
Sony CLIÉ Handheld Registration window to close.  
When you complete the registration and close the Sony CLIÉ Handheld  
Registration window, the Installation CD-ROM window is displayed.  
Other way to register your CLIÉ handheld  
You can register your CLIÉ handheld online by clicking [Start], selecting  
[Programs] ([All Programs] for Windows XP)-[Sony Handheld]-[About PEG-  
TJ35_TJ25], and clicking [CLIÉ Registration].  
Continued on next page  
• • • • • • • • • • • • • •17• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Step 3: Connecting your CLIÉ handheld and  
computer via the USB cable  
You can synchronize data between your CLIÉ handheld and computer by  
connecting them with the supplied USB cable after installing Palm™  
Desktop for CLIÉ.  
About the USB cable  
The supplied USB cable has two connectors. Connect the “A” plug to the USB  
port of your computer and the mini “B” plug to the plug adapter.  
“A” plug  
mini “B” plug  
1
2
Connect the mini “B” plug of the USB cable to the plug  
adapter (1), then connect the plug adapter to the  
interface connector of your CLIÉ handheld (2).  
Connect the “A” plug of the USB cable to the USB port of  
your computer.  
To the USB port of  
your computer  
Note  
Make sure to connect the USB cable directly to a USB port of your computer.  
If the USB cable is connected to a computer via another device, such as a USB  
®
hub, the HotSync operation may not work properly.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Step 4: Entering a user name for your CLIÉ  
handheld  
1
Rotate the Jog Dial™ navigator to select  
(HotSync) on  
the CLIE Launcher and press the Jog Dial™ navigator.  
The HotSync screen is displayed.  
Tip  
You can also tap  
(HotSync) to display the HotSync screen.  
2
3
Tap  
(HotSync) in the HotSync screen.  
®
The HotSync operation starts and the installation for the required  
software starts automatically.  
Click [OK] when your user name is displayed in the Users  
window of your computer.  
A beep is heard and the HotSync operation starts.  
®
Your user name entered for Palm™ Desktop for CLIÉ is also registered  
in your CLIÉ handheld.  
When the setup is complete, “HotSync operation complete.” will be  
displayed on your CLIÉ handheld.  
4
Click [Finish] in the Installation CD-ROM window of your  
computer.  
The setup is complete.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installing the supplied applications on your  
CLIÉ™ handheld  
You can install applications from the supplied Installation CD-ROM by  
following the procedure below.  
You must install Palm™ Desktop for CLIÉ on your computer, before  
installing the supplied applications on your CLIÉ handheld. Your CLIÉ  
handheld must be connected to your computer via the USB cable.  
b For details on supplied applications, refer to “CLIÉ Application Manual” (HTML  
format).  
Note  
The supplied applications are designed to operate on your CLIÉ handheld only.  
®
Compatibility with other CLIÉ handhelds or Palm OS PDAs is not guaranteed.  
Installing the supplied applications from  
the supplied Installation CD-ROM  
Quit all applications running on Windows®.  
1
2
Insert the supplied Installation CD-ROM into the CD-ROM  
drive of your computer.  
The Installaton CD-ROM window is displayed.  
3
Select the type of application you want to install, such as  
[CLIÉ Data Management].  
4
Click [Install] to install the application.  
Follow the on-screen instructions.  
5
To install the application on your CLIÉ handheld, tap  
(HotSync) in the HotSync screen.  
®
The HotSync operation starts and the selected application is transferred  
and installed on your CLIÉ handheld.  
6
Click [Finish] in the Installation CD-ROM window of your  
computer.  
Tip  
You can also install applications on your CLIÉ handheld using the function of Palm™  
Desktop for CLIÉ.  
b For details, refer to “Enhancing features with add-on applications: Installing:  
Installing from your computer” in “Handbook” (PDF format).  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Basic operations of  
your CLIÉ™  
handheld  
This chapter explains how to turn on/off your CLIÉ handheld, start an application, enter text,  
and perform a reset.  
Turning on/off your CLIÉ™ handheld  
Turning on your CLIÉ handheld  
Slide down the POWER/HOLD switch.  
Your CLIÉ handheld turns on, and the last screen you viewed is displayed.  
Slide down the POWER/HOLD switch  
Tip  
If you cannot turn on your CLIÉ handheld  
Did you fully charge your CLIÉ handheld?  
b For details, refer to “Frequently Asked Questions: I cannot turn on my CLIÉ  
handheld” on page 44.  
To turn off your CLIÉ handheld  
Slide down the POWER/HOLD switch again.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Starting an application  
To work with your CLIÉ handheld, you need to start an application.  
The following explains how to start applications from the CLIE Launcher using the Jog  
Dial™ navigator.  
Using the Jog Dial™ navigator and / (the Left/  
Right buttons)  
1 Displaying the CLIE Launcher  
1
Tap  
(Home) (page 65).  
The CLIE Launcher is displayed.  
2 Selecting an application  
1
Rotate the Jog Dial™ navigator to select an application to start.  
An application is selected.  
b
Rotate up or down  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2
Press the Jog Dial™ navigator.  
The selected application starts.  
b
Press  
Tip  
To select an application by CLIE Launcher groups  
If you press  
(the Left button) while the CLIE Launcher is displayed, you can select the  
CLIE Launcher groups in the left side of the screen. Rotate the Jog Dial™ navigator to  
select a CLIE Launcher group, and then press  
in that CLIE Launcher group.  
(the Right button) to select an application  
b
The CLIE Launcher  
groups list  
Press  
3 Quitting the application  
You do not need to save data manually on your CLIÉ handheld as you do on a  
computer, although some applications require data be saved.  
b For details, refer to “CLIÉ Application Manual” (HTML format).  
To switch from one application to another, perform either of the following  
methods.  
z Return to the CLIE Launcher by tapping  
(Home) and start another applicaton.  
z Press the application button (page 25) to start  
another application (only the application that is  
assigned to the application button).  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Other ways to start an application  
You can also start an application using the stylus or application buttons.  
Using the stylus  
Start the application by pressing the screen directly with the supplied stylus.  
1
Tap M m on the CLIE Launcher to display the application  
you want to start.  
2
Tap the application icon.  
The selected application starts.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Pressing the application buttons  
You can also start the applications by pressing the application buttons.  
The default setting of the application buttons are:  
Date Book,  
Address Book,  
To Do List, and  
Memo Pad.  
Tips  
Even when your CLIÉ handheld is off, you can start an application by pressing  
one of the application buttons.  
You can assign your favorite applications to the application buttons.  
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences):  
Assigning applications to application buttons” in “Handbook” (PDF format).  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Entering text  
Using Graffiti® 2 writing to enter text  
®
Graffiti 2 is a unique writing method for quickly and easily entering text into  
®
CLIÉ applications. Text is entered in the Graffiti 2 writing area using the  
®
supplied stylus. Graffiti 2 recognizes your handwriting and immediately  
converts it to typed text.  
®
Using the Graffiti 2 writing area of your  
CLIÉ handheld  
®
®
You need to write the Graffiti 2 strokes in the Graffiti 2 writing area in the  
lower screen of your CLIÉ handheld to enter text. The Graffiti 2 writing area  
®
is divided into two parts.  
Write lower-case  
letters here  
Write numbers here  
Division mark  
®
®
You need to write the Graffiti 2 strokes in the left side of the Graffiti  
2
writing area for lower-case letters, the right side for numbers, or write the  
strokes across the division marks for upper-case letters. Also, you need to  
®
activate Symbol mode to write symbols in the Graffiti 2 writing area.  
®
b For details on how to write the Graffiti 2 strokes, refer to “Entering text on your  
®
CLIÉ™ handheld: Using Graffiti 2 writing to enter text” in “Handbook” (PDF  
format).  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Entering text  
You need to start an application and display the screen in which you want to  
enter text.  
Follow the steps below to enter text.  
1
Start an application, such as Date Book, in which you  
want to enter text.  
2
Tap a line for the insertion point where text is to be  
entered.  
Write the Graffiti® 2 strokes in the Graffiti® 2 writing  
area.  
3
Displaying the on-screen Graffiti 2 Help  
®
To assist with the Graffiti 2 writing, you can display the on-screen Graffiti 2  
®
Help by dragging the stylus from the Graffiti 2 writing area in the lower part  
of the screen, to the top of the screen. Graffiti 2 Help opens a series of screens  
®
that show the character set of Graffiti 2 writing.  
b
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Other ways to enter text  
There are some other ways to enter text into your CLIÉ handheld. You can use whichever  
is the most comfortable for you.  
z Handwriting system  
®
There is another way of using the handwriting system besides Graffiti 2.  
b For details, refer to “Entering text on your CLIÉ™ handheld” in “Handbook” (PDF  
format).  
Decuma Input (for PEG-TJ35 only)  
You can enter text using Decuma Input, which converts your handwriting  
into typed text as you write.  
b For details on Decuma Input, refer to “Entering text on your CLIÉ™ handheld:  
Using Decuma Input to enter text (for PEG-TJ35 only)” in “Handbook” (PDF  
format).  
z On-screen keyboard  
You can enter text by tapping the on-screen keyboard.  
b For details, refer to “Entering text on your CLIÉ™ handheld: Using the on-screen  
keyboard to enter text” in “Handbook” (PDF format).  
z The HotSync® operation with a computer  
You can enter text on your computer using Palm™ Desktop for CLIÉ and  
®
then transfer it to your CLIÉ handheld via the HotSync operation.  
b For details, refer to [Help] in Palm™ Desktop for CLIÉ.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Synchronizing data between your CLIÉ  
handheld and computer (the HotSync®  
operation)  
®
What is the HotSync operation?  
®
The HotSync operation is an easy operation that allows you to synchronize  
data between your CLIÉ handheld and computer, back up the data of your  
CLIÉ handheld to your computer, and install add-on applications.  
®
b For details, refer to “Exchanging and updating files/data using the HotSync  
®
operation (Other HotSync operations)” in “Handbook” (PDF format).  
®
Performing the HotSync operation  
The following procedure explains how to synchronize data between your CLIÉ  
handheld and computer, using Date Book as an example.  
1
Turn on your computer.  
2
Enter a new schedule event in Date Book of your CLIÉ  
handheld.  
b For details on entering schedule events in Date Book, refer to “Managing  
schedule events (Date Book)” on page 8 in “Applications Guide” (PDF format).  
3
Connect your CLIÉ handheld and computer via the  
supplied USB cable (page 18).  
4
Rotate the Jog Dial™ navigator to select  
the CLIE Launcher and press the Jog Dial™ navigator.  
(HotSync) on  
The HotSync screen is displayed.  
Tip  
You can also tap  
(HotSync) to display the HotSync screen.  
Continued on next page  
• • • • • • • • • • • • • •29• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5
6
Tap  
(HotSync) in the HotSync screen.  
®
The HotSync operation starts.  
When the HotSync operation is complete, the following screen is  
displayed.  
®
Double-click  
desktop.  
(Palm Desktop for CLIÉ) on the Windows  
Palm™ Desktop for CLIÉ starts and the Date Book window is  
displayed. If you select the same date you entered in Step 2, you will see  
the schedule for that day.  
Tip  
You can also click [Start], select [Programs] ([All Programs] for Windows XP)-  
[Sony Handheld], and click [Palm Desktop for CLIÉ] to start the software.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
To display other application windows (Address  
Book, To Do List, and Memo Pad)  
Click any icon on the left side of the window.  
Making a backup is recommended  
If problems occur, even those requiring a hard reset, you can restore your CLIÉ  
®
handheld to the same state as it was at the last HotSync operation.  
You may not be able to back up certain add-on applications installed after the  
initial setup or the data created by them.  
b For backup details, refer to “Making a backup of the data or applications on your CLIÉ  
handheld” on page 41.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restarting your CLIÉ™ handheld  
Normally, you do not need to reset your CLIÉ handheld. However, if your CLIÉ handheld  
does not turn on or respond, performing a soft reset may solve the problem.  
To reset your CLIÉ handheld, follow the procedure below.  
Performing a soft reset  
All records and add-on applications stored on your CLIÉ handheld are retained  
even after performing a soft reset.  
Gently press the RESET button with the stylus.  
The system shuts down and your CLIÉ handheld restarts.  
After restarting, it displays “palm POWERED”, “SONY” and “CLIÉ”,  
followed by the Preferences screen for setting up the time and date.  
Notes  
After the RESET button is pressed, it takes a while before the Preferences  
screen is displayed. Do not press the RESET button again while resetting.  
Do not press the RESET button with anything other than the stylus, as a  
malfunction may occur.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Performing a hard reset  
If the soft reset does not solve the problem, you may need to perform a hard  
reset to restart your CLIÉ handheld.  
Notes  
All records and add-on applications stored on your CLIÉ  
handheld will be erased by performing a hard reset.  
Perform a hard reset only if a soft reset does not solve the problem.  
However, you can restore the data if you have made a backup on your computer  
®
via the HotSync operation*.  
* Note that some data cannot be backed up.  
b For details, refer to “Backing up your CLIE™ handheld data and applications”  
in “Handbook” (PDF format).  
1
2
Slide down and hold the POWER/HOLD switch.  
Press the RESET button gently with the stylus, and then  
release the stylus.  
Note  
Keep the POWER/HOLD switch held down.  
3
Wait for more than three seconds after the palm  
POWERED screen is displayed, and release the POWER/  
HOLD switch.  
A message “Erase all data?” is displayed.  
Continued on next page  
• • • • • • • • • • • • • •33• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4
Press  
(the Left button) on your CLIÉ handheld.  
Press  
(the Left button)  
Tip  
If you want to cancel the hard reset, press any button other than  
button).  
(the Left  
The hard reset is performed.  
After restarting, your CLIÉ handheld displays “palm POWERED”, “SONY”  
and “CLIÉ”, followed by the SETUP screen. Refer to “Step 2: Performing the  
initial setup after turning on your CLIÉ handheld for the first time” on page 9  
for the initial setup.  
After a hard reset, only the current date and time are retained. Formats,  
Preferences, and other controls revert to the factory settings.  
Notes  
After the RESET button is pressed, it takes a while before the Setup screen is  
displayed. Do not press the RESET button again while resetting.  
If  
(the Left button) is not pressed long enough, the hard reset may not be  
performed.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UsingCLIÉManuals  
with your  
computer  
You can also use the other manuals of your CLIÉ handheld that are stored on the supplied  
Installation CD-ROM. The manuals are to be read on your computer.  
Note  
Prior to using the manuals, refer to “Step 1: Installing the software on your computer”  
on page 15 to install Palm™ Desktop for CLIÉ. CLIÉ Manuals will be installed at  
the same time.  
Manuals Overview  
You can read each manual installed on your computer to use your CLIÉ  
handheld more effectively.  
How to use the supplied applications  
Applications Guide  
“Applications Guide” is a PDF format manual.  
It introduces the supplied applications and briefly  
explains how to use them.  
CLIÉ Application Manual  
“CLIÉ Application Manual” is a HTML format manual.  
It explains how to use the supplied applications in detail.  
Continued on next page  
• • • • • • • • • • • • • •35• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
How to perform basic operations and to use  
advanced features of your CLIÉ handheld  
Handbook  
“Handbook” is a PDF format manual.  
It explains the basic operations and advanced features of  
your CLIÉ handheld in detail.  
How to solve problems you may have  
If you have any problems while using your CLIÉ handheld, refer to  
“Frequently Asked Questions” on page 42 first.  
If the problem persists, read “Troubleshooting Q&A” to solve the problem.  
Troubleshooting Q&A  
“Troubleshooting Q&A” is a PDF format manual.  
It helps solve common problems that you may have  
while using your CLIÉ handheld.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Opening CLIÉ Manuals  
Follow the steps below to open CLIÉ Manuals.  
1
Double-click  
the Windows desktop.  
(CLIÉ Manuals PEG-TJ35_PEG-TJ25) on  
The CLIÉ Application Guide PEG-TJ35/PEG-TJ25 window is  
displayed.  
Tip  
You can also click [Start], select [Programs] ([All Programs] for Windows XP)-  
[Sony Handheld]-[About PEG-TJ35_PEG-TJ25], and click [CLIÉ Manuals] to  
start CLIÉ Manuals.  
2
Click any manual you want to read.  
The selected manual is displayed.  
Note  
To read the PDF manuals, Adobe Acrobat Reader must be installed on your  
computer. If it is not installed on your computer, you can install it from the  
supplied Installation CD-ROM.  
b For details on how to use PDF manuals or installation, refer to “Reading the  
PDF manuals on your computer” (page 38).  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Reading the PDF manuals on your computer  
The following explains how to read the PDF format manuals on your computer.  
A Use Hand Tool to scroll the displayed  
D Click here and drag to scroll the page.  
page.  
E You can display the linked page by  
B Bookmarks are displayed.  
clicking a point where  
displayed.  
is  
Click each title to display the page.  
Click  
the chapters.  
to display the directories of  
F Buttons for displaying the previous or  
next page. You can also enter a page  
number you want to display at the  
bottom of the page number area.  
C Buttons for zooming in/out the page.  
Installing Adobe Acrobat Reader on your  
computer  
If Adobe Acrobat Reader is not installed on your computer, follow the  
steps below to install it.  
Quit all applications running on Windows®.  
1
2
Insert the supplied Installation CD-ROM into the CD-ROM  
drive of your computer.  
The Installation CD-ROM window is displayed.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3
4
Click [CLIÉ Basic] in the left side of the window.  
Click [Install] to install Adobe Acrobat Reader.  
Follow the on-screen instructions.  
5
Click [Finish].  
The Installation CD-ROM window closes.  
Reading the HTML manual on your computer  
(CLIÉ Application Manual)  
The following explains how to read the HTML format manual on your  
computer.  
Note  
You need Microsoft Internet Explorer version 5.0 or later to display “CLIÉ  
Application Manual” properly.  
A Click any application to display the explanation in detail.  
B Click to display the index of the supplied applications.  
C Click any application group to display the group. Then you can select a desired  
application from that group to display further instructions.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
If you have problems, please follow the procedure below.  
Make note of any messages or alerts that are displayed.  
Step 1: Refer to this manual, “Troubleshooting  
Q&A”, or the manual of each application  
• Read “Frequently Asked Questions” on page 42.  
• Refer to “Troubleshooting Q&A” (PDF format).  
• Click  
(CLIÉ Manuals PEG-TJ35_PEG-TJ25) on the Windows  
desktop for more information on applications.  
Step 2: Refer to the Sony CLIÉ handheld Support  
website  
Double-click  
(CLIÉ Info) on the Windows desktop, and select  
[CLIÉ™ Handheld Support].  
Note  
®
Thousands of third party add-on applications are available for the Palm OS  
platform. Sony does not support third party applications. If you are having problems  
with a third party application, please contact the publisher of that application.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Making a backup of the data or applications on  
your CLIÉ handheld  
Sony recommends that you make a backup of your data in case of unexpected  
problems. Backing up your data will ensure that it can be restored again on your  
CLIÉ handheld, even if you have to perform a hard reset.  
Making a backup using Memory Stick Backup  
Use “Memory Stick” media and Memory Stick Backup on your CLIÉ  
handheld to back up data and applications on your CLIÉ handheld.  
b “Memory Stick” media (sold separately) is required.  
For details, refer to “Backing up your CLIÉ™ handheld data and applications:  
Backing up data and applications to “Memory Stick” media using Memory Stick  
Backup” in “Handbook” (PDF format).  
Making a backup using the HotSync® operation  
Data or applications on your CLIÉ handheld is backed up to your computer  
®
when the HotSync operation is performed. If you need to perform a hard reset,  
this would erase all user data and applications stored on your CLIÉ handheld.  
However, the erased data and applications can be restored with the next  
®
HotSync operation.  
Notes  
Some add-on applications (not installed at the factory), and some application  
data and settings may not be backed up using the HotSync operation. However,  
a complete backup of all data on your CLIÉ handheld can be made with  
Memory Stick Backup.  
®
Use Memory Stick Backup often to make complete backups.  
When you need to restore data, and so on, make sure that you perform the  
®
HotSync operation immediately after you perform a hard reset. Otherwise, if  
you create new data on your CLIÉ handheld between the hard reset and  
®
performing the HotSync operation, the data may be lost.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Frequently Asked Questions  
If the solutions mentioned in this section do not solve your problem, refer to  
“Troubleshooting Q&A” (PDF format).  
My CLIÉ handheld does not work properly (page 44)  
• I cannot turn on my CLIÉ handheld  
• The screen is not displayed even though the POWER LED is on  
• My CLIÉ handheld does not respond  
• My CLIÉ handheld keeps turning itself off  
• My CLIÉ handheld does not produce any sounds  
• The backlight does not turn on when I adjust the brightness level  
• The LCD display cannot be viewed properly  
• Applications do not operate properly after a soft reset is performed  
• I cannot use the Jog Dial™ navigator  
Error messages (page 46)  
• An error message appears repeatedly  
• The message “Invalid process” appears when an application is started  
I cannot enter text properly (page 46)  
• My CLIÉ handheld does not recognize handwritten characters (when using  
Graffiti® 2)  
• My CLIÉ handheld does not recognize handwritten characters (when using  
Decuma Input)  
The HotSync® problems (page 47)  
• I cannot perform the local HotSync® operation  
• I cannot start the HotSync® operation by tapping  
(HotSync) on the  
HotSync screen  
• I cannot cancel the HotSync® operation midway  
• It takes a long time to complete the HotSync® operation  
• Data cannot be synchronized with some applications when the HotSync®  
operation is performed  
• I cannot back up some data using the HotSync® operation  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Palm™ Desktop for CLIÉ does not start or cannot be selected from the  
menu  
HotSync Manager does not start.  
(HotSync) is not displayed in the  
task tray (Notification area) at the bottom right of my computer window  
I cannot play music (for PEG-TJ35 only) (page 51)  
• MP3 files cannot be read or played  
I cannot use “Memory Stick” media (page 51)  
• My CLIÉ handheld does not recognize “Memory Stick” media, or an error  
occurs  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
My CLIÉ handheld does not work properly  
I cannot turn on my CLIÉ handheld  
B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 61) ?  
Your CLIÉ handheld does not work when the POWER/HOLD switch is in HOLD  
mode. Make sure you release HOLD mode.  
B Has the battery power of your CLIÉ handheld run out?  
Connect your CLIÉ handheld to the AC power adapter with the plug adapter, then  
allow it to be charged for a few minutes before turning it on. If it turns on, continue  
charging for approximately four hours and then perform a soft reset.  
B Is the connector between your CLIÉ handheld and the plug adapter dirty?  
You cannot charge your CLIÉ handheld if the connector is dirty. Connect and  
disconnect your CLIÉ handheld and the plug adapter several times to clean the  
connector.  
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld  
(page 32).  
The screen is not displayed even though the POWER  
LED is on  
B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 61) ?  
The screen is not displayed when the POWER/HOLD switch is in HOLD mode. Make  
sure you release HOLD mode.  
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld  
(page 32).  
My CLIÉ handheld does not respond  
B Is the POWER/HOLD switch of your CLIÉ handheld in HOLD mode (page 61) ?  
Your CLIÉ handheld does not operate when the POWER/HOLD switch is in HOLD  
mode. Make sure you release HOLD mode.  
B Is your CLIÉ handheld placed near the IR port of your computer?  
Move your CLIÉ handheld away from the IR port of your computer except when  
®
performing the IR HotSync operation, as a malfunction may occur. You can also  
disable the IR feature by selecting [Off] next to [Beam Receive:] in [General] of the  
Preferences screen.  
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld  
(page 32).  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
My CLIÉ handheld keeps turning itself off  
B Your CLIÉ handheld is designed to turn itself off after a period of inactivity (Automatic  
power-off). You can set the automatic power-off time by selecting time for [Auto-off  
After:] in [General] of the Preferences screen.  
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the automatic  
power-off time” in “Handbook” (PDF format).  
B Did you set [After a preset delay] from [Auto Lock Handheld:] in the Security screen?  
If you set [After a preset delay] from [Auto Lock Handheld:], your CLIÉ handheld may  
turn off after a shorter period even if you set the automatic power-off time.  
b For details, refer to “Protecting your data with a password: Locking your CLIÉ handheld with  
a password (Data protection)” in “Handbook” (PDF format).  
My CLIÉ handheld does not produce any sounds  
B Is [System Sound:] in [General] of the Preferences screen set to [Off]?  
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting sounds” in  
“Handbook” (PDF format).  
B Adjust the volume settings in the Adjust Volume dialog box displayed by tapping  
in the Status Info dialog box (page 67).  
Tip  
If [Muting]* is selected in the Adjust Volume dialog box, all sounds, including audio, are  
muted.  
* [Muting] is available for PEG-TJ35 only.  
b For details, refer to “CLIÉ™ handheld components: Status Information” (page 67).  
The backlight does not turn on when I adjust the  
brightness level  
B If the brightness is set to the lowest level, the display may be illegible. However, this  
is not a malfunction.  
The LCD display cannot be viewed properly  
B Depending upon the angle of vision, the brightness may be uneven, however, this is not  
a malfunction. You can adjust the brightness level in the Adjust Brightness dialog  
box displayed by tapping  
(page 65) at the bottom left of the Graffiti 2 writing area.  
If the backlight is off, you can turn it on by sliding down the POWER/HOLD switch  
and hold it for more than two seconds.  
Continued on next page  
• • • • • • • • • • • • • •45• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Applications do not operate properly after a soft  
reset is performed  
B If you encounter application problems (such as improper operations, unusual display,  
or freezing during a soft reset) after you performed a reset, the reset may not be  
completed properly. In such a case, perform a soft reset once again (page 32). If you  
still cannot solve your problem, try a hard reset (page 33).  
Note on performing a reset  
After performing a reset, do not press the RESET button at the back of your CLIÉ  
handheld again until the Preferences screen or the Setup screen is displayed.  
I cannot use the Jog Dial™ navigator  
B The Jog Dial™ navigator (page 60) is not available for some applications.  
An error message appears repeatedly  
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld  
(page 32).  
The message “Invalid process” appears when an  
application is started  
B If there is insufficient memory space in your CLIÉ handheld or “Memory Stick”media,  
applications may not work properly. Delete any unnecessary data/files.  
I cannot enter text properly  
My CLIÉ handheld does not recognize handwritten  
®
characters (when using Graffiti 2 )  
B To have your CLIÉ handheld recognize handwritten characters entered with the stylus,  
®
you must use Graffiti 2.  
®
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti 2 writing to  
enter text” in “Handbook” (PDF format).  
®
®
B Make sure you enter the Graffiti 2 strokes in the Graffiti 2 writing area (page 66).  
B Make sure you enter the Graffiti 2 strokes for letters in the left side of the Graffiti  
®
®
2
writing area and numbers in the right side (page 66).  
®
B Check that Graffiti 2 is not shifted into Symbol mode.  
®
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti 2 writing to  
enter text” in “Handbook” (PDF format).  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
B If the letter “L” is registered as a menu command for an application, the letters “K”,  
“T”, “I”, and “X” will not work as menu command.  
®
B How to enter Graffiti 2 characters faster and more accurately.  
®
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Graffiti 2 writing to  
enter text” in “Handbook” (PDF format).  
My CLIÉ handheld does not recognize handwritten  
characters (when using Decuma Input)  
B Refer to “Decuma Input” in “CLIÉ Application Manual” (HTML format) and try  
writing again using Decuma Input.  
B If your handwriting cannot be recognized correctly as numbers or special characters in  
General characters mode, switch the Decuma Input area from General characters mode  
to Numbers and special characters mode.  
b For details, refer to “Entering text on your CLIÉ™ handheld: Using Decuma Input to enter  
text” in “Handbook” (PDF format).  
®
The HotSync problems  
®
I cannot perform the local HotSync operation  
Verifying your CLIÉ handheld  
B Is the connector between your CLIÉ handheld and the plug adapter dirty?  
Connect and disconnect your CLIÉ handheld and the plug adapter several times to  
clean the connector.  
B Are your CLIÉ handheld with the plug adapter and the USB cable properly connected  
(page 18)?  
B Is there sufficient memory space of your CLIÉ handheld?  
Delete any unnecessary data/files and then perform the HotSync operation again.  
®
B Are you using the same user name that is used for another CLIÉ handheld?  
Change the user name.  
Verifying your computer  
B Is Palm™ Desktop for CLIÉ installed?  
B Is the operating system on your computer compatible?  
The following operating systems are compatible with your CLIÉ handheld. Operating  
systems other than the following are not supported.  
Microsoft Windows 98 Second Edition  
Microsoft Windows 2000 Professional  
Microsoft Windows Me  
Microsoft Windows XP  
Note  
Upgrade versions of operating systems are not supported.  
Continued on next page  
• • • • • • • • • • • • • •47• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
B If you are using Windows 2000 Professional or Windows XP, log in as an  
“Administrator.”  
B Is the USB cable properly connected to your computer (page 18)?  
B Is  
(HotSync) displayed in the task tray (Notification area) at the bottom right of  
your computer window?  
If not, click [Start], select [Programs] ([All Programs] for Windows XP)-[Sony  
Handheld], and click [HotSync Manager] to start HotSync Manager.  
B Is [Local USB] in the shortcut menu selected? (You can display this by clicking  
(HotSync) in the task tray (Notification area).)  
If not, select [Local USB].  
B Is the USB port active?  
Check whether the USB port works normally by connecting another USB device, such  
as a USB mouse.  
B If you use an extended terminal devices for laptop computers, such as a port replicator,  
you may not be able to use either the port replicator or the USB port of your computer.  
B Quit all applications other than Palm™ Desktop for CLIÉ.  
®
If you cannot perform the HotSync operation even after following the above  
instructions, perform a soft reset by pressing the RESET button at the back of your CLIÉ  
handheld (page 32).  
®
For particular problems regarding the HotSync  
operations, refer to the following.  
®
I cannot start the HotSync operation by tapping  
(HotSync) on the HotSync screen  
B Ensure [Local] and [Cradle/Cable] are selected in the HotSync screen.  
B Perform a soft reset by pressing the RESET button at the back of your CLIÉ handheld  
(page 32).  
®
I cannot cancel the HotSync operation midway  
®
B You may not be able to stop the HotSync operation by tapping [Cancel] for over ten  
®
seconds after you start the USB HotSync operation. Try again after a while.  
®
B If you disconnect your CLIÉ handheld and computer during the HotSync operation,  
®
the HotSync operation may not perform correctly.  
In such a case, perform a soft reset (page 32).  
®
B If you cannot stop the HotSync operation even by tapping [Cancel], perform a soft  
reset (page 32).  
®
It takes a long time to complete the HotSync  
operation  
B Depending on the application you are using, it may require time to complete the  
®
HotSync operation because of large data/file sizes.  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Data cannot be synchronized with some applications  
®
when the HotSync operation is performed  
B Does the user name for Palm™ Desktop for CLIÉ match the one for your CLIÉ  
handheld?  
In Palm™ Desktop for CLIÉ, select the user name corresponding to your CLIÉ  
handheld user name.  
B Is the application set not to synchronize files?  
Click  
(HotSync) in the task tray (Notification area) at the bottom right of your  
computer window and select [Custom...] from the shortcut menu. Check that the  
application is set to synchronize files.  
B Is third party backup or synchronization software installed on your computer or CLIÉ  
handheld?  
In such a case, you may not synchronize some applications using Palm™ Desktop  
for CLIÉ.  
B Is there sufficient memory space in your CLIÉ handheld?  
Delete unnecessary data/files and then perform the HotSync operation again.  
®
B Is private data hidden in the Security screen?  
Hidden data cannot be displayed in Palm™ Desktop for CLIÉ. When you want to  
display hidden data, select [Show Records] below [Current Privacy:] in the Security  
screen and enter the password.  
B Make sure that Intellisync Lite is installed to synchronize Date Book, Address  
®
Book, To Do List and Memo Pad of your CLIÉ handheld with Microsoft  
Outlook or Lotus Organizer.  
b For details, refer to “Intellisync Lite” in “CLIÉ Application Manual” (HTML format).  
®
I cannot back up some data using the HotSync  
operation  
B Some add-on applications (not installed at the factory), and some application data and  
®
settings may not be backed up using the HotSync operation. However, a complete  
backup of all data on your CLIÉ handheld can be made with Memory Stick Backup.  
Use Memory Stick Backup often to make complete backups.  
b For details, refer to “Backing up your CLIÉ™ handheld data and applications: Backing up  
data and applications to “Memory Stick” media using Memory Stick Backup” in “Handbook”  
(PDF format).  
Palm™ Desktop for CLIÉ does not start or cannot be  
selected from the menu  
B Is Palm™ Desktop for CLIÉ properly installed on your computer?  
The hardware or the software of your computer may not be compatible with Palm™  
Desktop for CLIÉ. Uninstall Palm™ Desktop for CLIÉ and reinstall it.  
Continued on next page  
• • • • • • • • • • • • • •49• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HotSync Manager does not start.  
(HotSync) is not  
displayed in the task tray (Notification area) at the  
bottom right of my computer window  
B Reinstall Palm™ Desktop for CLIÉ.  
®
If you still cannot perform the HotSync operation  
®
If you cannot solve your HotSync operation problem by following the troubleshooting  
tips in this manual, follow the procedure below.  
Check if any “Unknown device” is listed in the Device Manager on your  
computer.  
1 Right-click [My Computer] and select [Properties] from the menu.  
The System Properties window is displayed.  
2 If you are using Windows 2000 Professional/Windows XP, click [Hardware].  
3 Click [Device Manager].  
4 Check if there is a device marked with  
or  
.
A device with such mark is not operating normally. Contact the manufacturer of the  
device to get information on the latest device drivers.  
®
You cannot perform the HotSync operation before you install Palm™  
Desktop for CLIÉ on your computer  
®
If you perform the HotSync operation before you install the CLIÉ handheld drivers on  
your computer, other drivers may be installed on your computer and a problem may occur  
in your computer system.  
®
Make sure you install Palm™ Desktop for CLIÉ before performing the HotSync  
operation.  
Do not use a USB hub  
If you connect your CLIÉ handheld to your computer via a USB hub, you may not be able  
®
to perform the HotSync operation properly. Make sure you connect the USB cable  
directly to a USB port of your computer.  
Some computers have the hub function built into their internal circuitry. Contact your  
computer manufacturer to check whether the USB port of your computer is connected to  
an internal USB hub.  
Check that the USB port of your computer is enabled  
If you are using a Windows 95 pre-installed computer or other older type of computer  
equipped with a USB port, the USB port may be disabled by default. Test the USB port  
with another device, such as a USB mouse. If that device does not work, check the BIOS  
setting of your computer.  
In addition, check the setting in the Device Manager: Right-click [My Computer] and  
select [Properties] from the menu. (If you are using Windows 2000 Professional/  
Windows XP, click [Hardware].) Click [Device Manager] and check that [USB  
controller] is displayed in the Device Manager window.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If USB controller is not displayed  
b For details, refer to the manual of your computer.  
I cannot play music (for PEG-TJ35 only)  
MP3 files cannot be read or played  
B Check that the MP3 files are located in [PALM/Programs/MSAUDIO] directory on the  
“Memory Stick” media.  
To play the MP3 files located in other directories, select [File] in the Settings screen,  
which can be displayed by selecting [Settings…] from [Options] in the menu of  
AeroPlayer for CLIE, and select [Search entire card].  
[Search one folder] is set by default.  
b For details on file formats supported by your CLIÉ handheld, refer to “AeroPlayer for CLIE”  
in “CLIÉ Application Manual” (HTML format).  
I cannot use “Memory Stick” media  
My CLIÉ handheld does not recognize “Memory Stick”  
media, or an error occurs  
B Remove the “Memory Stick” media and try inserting it again.  
B If the terminal part of the “Memory Stick” media is dirty, your CLIÉ handheld cannot  
read the data/files. Wipe the terminal with a soft cloth, such as a cotton pad.  
B You cannot use “Memory Stick” media that is formatted in a device other than your  
CLIÉ handheld. Format it on your CLIÉ handheld.  
B When the battery power of your CLIÉ handheld is running low, data/files on “Memory  
Stick” media may not be displayed. Charge the battery of your CLIÉ handheld.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Customer Support and Customer Registration  
For customer support information  
Double-click  
(CLIÉ Info) on the Windows desktop, and select [CLIÉ™  
Handheld Support].  
For online customer registration (For customers in the  
U.S.A. and Canada only)  
Double-click  
(CLIÉ Info) on the Windows desktop, and select [Sony  
CLIÉ™ Registration].  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Notes on use  
Handling your CLIÉ handheld  
• Make sure you do not scratch or damage your CLIÉ handheld’s screen.  
Always use the supplied stylus to tap on the screen.  
Do not use a writing pen, pencil, or other sharp object on the screen.  
• Do not expose your CLIÉ handheld to rain or moisture. Should water enter  
the circuitry through the buttons and switches, your CLIÉ handheld may be  
damaged.  
• Your CLIÉ handheld’s screen is made of glass. Do not drop or submit your  
CLIÉ handheld to excessive shock. Do not carry your CLIÉ handheld in your  
pocket. If you sit down with your CLIÉ handheld in the pocket, your CLIÉ  
handheld may break.  
• Avoid using or storing your CLIÉ handheld in locations subject to:  
– extremely high temperatures, such as inside a car exposed to the sun, or  
near a heater.  
– direct sunlight  
– high humidity  
– excessive dust  
Cleaning your CLIÉ handheld  
Clean your CLIÉ handheld with a soft, dry cloth.  
Cleaning the stylus  
Tapping or dragging the screen with a dirty stylus may damage the screen  
surface.  
Wipe the stylus with a dry cloth when it gets dirty.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Battery considerations  
Battery safety  
To avoid battery leakage, heat generation, firing, or bust, observe the  
following:  
• Do not use any other type of battery in your CLIÉ handheld.  
• Do not charge the battery in any other way than as specified in this manual.  
• Do not throw the battery into fire.  
• Do not attempt to short-circuit the battery.  
• Do not take the battery apart.  
• Do not modify the battery.  
• Do not heat the battery in an oven or micro wave.  
• Do not charge the battery near an open flame or in direct sunlight.  
• Do not leave the battery in a car.  
• Do not subject your CLIÉ handheld or the battery to excessive shock.  
• Take care not to drop your CLIÉ handheld, give pressure to it with a sharp  
object, or crush with a heavy object.  
• If you have skin contact with battery leakage or get some in your eye, wash  
with water immediately and consult a doctor.  
Charging  
• It takes approximately four hours to charge your CLIÉ handheld when the  
battery is empty.  
• If you charge your CLIÉ handheld every day, it takes only a few minutes to  
charge the battery.  
• You can operate your CLIÉ handheld while the battery is being charged.  
Battery life  
Battery life varies depending on the conditions and environment where you use  
your CLIÉ handheld and applications used.  
b For details about battery life, refer to “Specifications” on page 57.  
Conserving the battery  
• Turn off the backlight under good lighting conditions.  
b For details on the backlight, refer to “POWER/HOLD switch” on page 62.  
• Change the automatic power-off time setting so that your CLIÉ handheld  
will automatically turn off after a short period of inactivity.  
b For details, refer to “Customizing your CLIÉ™ handheld (Preferences): Setting the  
automatic power-off time” in “Handbook” (PDF format).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using peripheral devices  
If a low battery warning is displayed while using peripheral devices, change  
your CLIÉ handheld immediately. If you continuously use it, it automatically  
turns off and cannot operate until you charge it.  
When the battery power gets low  
• When the battery power gets low, a warning message is displayed on the  
screen, “Memory Stick” media becomes inaccessible, and the backlight  
adjustment no longer operates. If this occurs, connect your CLIÉ handheld  
®
to wall outlet and perform the HotSync operation.  
• If your CLIÉ handheld does not turn on when you slide down the POWER/  
HOLD switch, charge your CLIÉ handheld immediately.  
• The remaining battery indicator may not always reflect the actual battery  
power. To prevent loss of battery power, charge your CLIÉ handheld  
frequently.  
• You do not have to replace batteries. When battery power gets low, charge  
your CLIÉ handheld immediately. Never disassemble your CLIÉ handheld  
to take out the battery.  
Do not let the remaining battery power indicator reach 0  
If you leave your CLIÉ handheld in an uncharged state (the remaining  
battery power indicator reaches 0  
), all user data stored on your  
CLIÉ handheld will be erased. To avoid this, you should charge your CLIÉ  
handheld frequently.  
Other information  
Your CLIÉ handheld may get warm if turned on for long periods of time. This  
is not a malfunction.  
About replacing the battery  
CAUTION  
Please contact with your nearest Sony dealer in connection with this product  
with problem.  
Continued on next page  
• • • • • • • • • • • • • •55• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recycling Lithium-Ion batteries  
The following information for recycling batteries is ONLY intended for  
customers in the U.S.A. and Canada.  
Lithium-Ion batteries are recyclable.  
You can help preserve our environment by returning your used rechargeable  
batteries to the collection and recycling location nearest you.  
For more information regarding recycling of rechargeable batteries, call toll  
free 1-800-822-8837, or visit the website (http://www.rbrc.org/).  
When you dispose of your CLIÉ handheld, remove the battery for recycling.  
How to remove a rechargeable button battery  
Note  
Remove the battery only when you dispose of your CLIÉ handheld.  
1
3
2
4
Remove the screw from the back  
of your CLIÉ handheld with a  
Phillips screwdriver.  
Remove the battery cover.  
Lift up the battery from your  
CLIÉ handheld.  
Disconnect the cord by pulling the  
battery.  
Do not damage the removed battery.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
OS  
Operating temperature  
®
Palm OS 5 (Ver.5.2.1)  
41 ºF to 95 ºF (5 ºC to 35 ºC)  
CPU  
Power requirements  
AC power adapter (supplied):  
DC 5.2 V (dedicated connector)  
(Use an appropriate AC cord from  
the supplied AC cords)  
Battery:  
i.MXL Application Processor  
Memory  
PEG-TJ35: 32 MB (RAM)  
User memory available:  
Approx. 23 MB  
Lithium-ion battery  
PEG-TJ25: 16 MB (RAM)  
User memory available:  
Approx. 11 MB  
Battery life  
Operating PIMs (Personal  
Information Management  
applications):  
External input/output  
Interface connector  
IrDA (1.2)  
Approx. 10 days  
(when PIMs, such as Date Book,  
are operated for 30 minutes per day  
with the backlight off)  
“Memory Stick” slot  
Display  
Approx. 5.5 days  
TFT color display with backlight,  
(when PIMs, such as Date Book,  
are operated for 30 minutes per day  
with the backlight on*)  
320 × 320 dots, 65,536 colors  
Other functions  
Monaural Speaker  
(for PEG-TJ35 only)  
Buzzer*  
Battery power charge varies depending on  
the temperature and conditions of use.  
(for PEG-TJ25 only)  
* The brightness level of the backlight is  
at the default setting when the backlight  
is on.  
* There is no operating sound when you  
turn on your CLIÉ handheld for the first  
time or restart it.  
Dimensions (excluding  
projections)  
3
15  
Approx. 3 × 4 /8  
×
/32 inches  
(75.3 × 110.1 × 11.9 mm) (w/h/d)  
Weight  
PEG-TJ35: Approx. 4.9 oz (140 g)  
PEG-TJ25: Approx. 4.9 oz (140 g)  
(including the supplied stylus)  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Audio function  
System  
(for PEG-TJ35 only)  
requirements  
The following are the system  
specifications required to run Palm™  
Desktop for CLIÉ and software  
supplied on the Installation CD-ROM:  
• OS:  
Audio frequency response  
20 Hz to 20,000 Hz  
Audio recording format  
MP3 (96 k~256 kbps)  
Microsoft Windows 98 Second  
Edition,  
Sampling frequency  
44.1 kHz  
Windows Millennium Edition,  
Windows 2000 Professional,  
Windows XP Home Edition,  
Windows XP Professional  
• CPU: Pentium II 400MHz or faster  
(Pentium III 500MHz or faster is  
recommended)  
Output  
Headphones: Stereo mini-jack  
Maximum recording time  
MP3 format  
(when using a 128MB “Memory  
Stick” media, sold separately):  
Approx. 65 minutes  
(bit rate: 256 kbps)  
• RAM: 96MB or more (128MB or  
more is recommended, 256MB or  
more is recommended for Windows  
XP)  
Approx. 130 minutes  
(bit rate: 128 kbps)  
• Hard disk drive space: 200MB or  
more (350MB or more is  
recommended)  
Approx. 170 minutes  
(bit rate: 96 kbps)  
Battery life  
• Display: High Color or better,  
800 × 600 dots or more is  
recommended  
Playing audio files continuously:  
Approx. 6.5 hours  
(when playing audio files in HOLD  
mode)  
• CD-ROM drive  
• USB port  
Approx. 2 hours  
(when playing audio files not in  
HOLD mode and the backlight on*)  
• Pointing device such as a mouse or  
touchpad  
* The brightness level of the backlight is  
at the default setting when the backlight  
is on.  
Design and specifications are subject  
to change without notice.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
CLIÉ™ handheld  
components  
This chapter explains each part of your CLIÉ handheld, the supplied accessories, and  
additional information.  
Front panel  
Continued on next page  
• • • • • • • • • • • • • •59• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
A Cover slots  
G Application Buttons  
(Page 69)  
(Page 25)  
For attaching the protective soft cover  
Even when your CLIÉ handheld is  
turned off, pressing an application  
button turns on your CLIÉ handheld  
and starts that application.  
B Screen  
(Page 65)  
C Silk Screen Area  
D Jog Dial™ navigator  
(Page 22)  
Use to select and run applications or  
items. Depending on the application,  
unique features are assigned.  
E POWER LED  
(Page 8)  
Lights or blinks when turned on. The  
LED shows the status of your CLIÉ  
handheld by its color.  
Lights green: The power is on. (It  
also lights in HOLD mode)  
Blinks green: Blinks a few  
moments when you operate any  
button on your CLIÉ handheld in  
HOLD mode.  
Lights orange: The battery is being  
charged.  
Blinks orange: Alarm function that  
notifies you at a preset time if you  
have set an alarm in an application,  
such as Date Book.  
OFF: The power is off.  
F Left/Right Buttons  
Moves the selection area of an item or  
an operation. Depending on the  
application, unique features such as  
displaying the previous or next screen  
are assigned.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Back panel  
A Stylus  
F “Memory Stick” Slot  
(Page 10)  
A pointed tool to operate your CLIÉ  
(Page 63)  
Insert a “Memory Stick” media into  
handheld by touching the screen with it.  
this slot.  
B Speaker  
G IR Port  
(for PEG-TJ35 only)  
Buzzer  
(for PEG-TJ25 only)  
(Page 64)  
You can beam data between your  
CLIÉ handheld and another CLIÉ  
handheld or Palm OS PDA.  
®
C POWER/HOLD Switch  
H Strap Hook  
(Pages 9, 62)  
Turns your CLIÉ handheld on and  
off, and sets your CLIÉ handheld to  
HOLD mode.  
I RESET Button  
(Pages 32, 33)  
Press to restart your CLIÉ handheld.  
J Interface Connector  
(for PEG-TJ35 only)  
(Page 8)  
For headphones with a φ3.5 stereo  
mini jack (commercially available).  
E “Memory Stick” LED  
(Page 63)  
Blinks orange while your CLIÉ  
handheld is writing data to, or reading  
data from a “Memory Stick” media.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
POWER/HOLD switch  
z Turning on/off your CLIÉ handheld  
Slide down the POWER/HOLD switch  
The POWER/HOLD switch will return to the center position after being  
released. Your CLIÉ handheld powers on, the last screen viewed is  
displayed, and the POWER LED lights green. To turn off your CLIÉ  
handheld, slide down the POWER/HOLD switch again and then release.  
POWER/HOLD Switch  
z Turning on/off the LCD backlight  
Slide down the POWER/HOLD switch and hold it for more than two  
seconds.  
z Turning on/off the HOLD mode  
Slide up the POWER/HOLD switch  
Putting your CLIÉ handheld in HOLD mode deactivates the touch screen.  
If you put the POWER/HOLD switch into the HOLD position while the  
power is on, the screen display turns off, even during an operation. To  
release the HOLD mode, slide down the POWER/HOLD switch to the  
center position.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using “Memory Stick” media  
z Inserting “Memory Stick” media  
The “Memory Stick” LED blinks orange  
while your CLIÉ handheld is writing data to,  
or reading data from a “Memory Stick” media.  
Note  
Insert a “Memory Stick” media in the right direction. If you forcibly insert a  
“Memory Stick” media in the wrong direction, the “Memory Stick” slot may  
be damaged.  
z Removing “Memory Stick” media  
b
Push “Memory Stick” media in  
Pull “Memory Stick” media out  
Note  
Make sure that your CLIÉ handheld is not writing data/files to, or reading  
data/files from a “Memory Stick” media before removing it. (The “Memory  
Stick” LED blinks when it is reading or writing data/files.) If you remove a  
“Memory Stick” media while the “Memory Stick” LED is blinking, recorded  
data/files may be deleted or damaged.  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
IR port  
You can beam data or applications between your CLIÉ handheld and another  
®
CLIÉ handheld or Palm OS PDA.  
b For details, refer to “Beaming” in “Handbook” (PDF format).  
* Move your CLIÉ handheld gradually to find the most  
sensitive direction.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Locating the components of the CLIE Launcher  
Tip  
If a different screen is displayed, tap  
(Home).  
A Time Indicator  
E Menu icon  
Tap to display menu of the current  
application.  
Displays the current time. To change  
the display format, specify [Time:]  
from [Formats] in the Preferences  
screen.  
b For details, refer to “Customizing your  
CLIÉ™ handheld (Preferences):  
Setting the display format for time,  
date, and numbers” in “Handbook”  
(PDF format).  
F Brightness Adjustment icon  
Tap to display the dialog box for  
adjusting brightness. Four brightness  
levels are available.  
G Battery Remain icon  
Displays the remaining battery power  
of your CLIÉ handheld. When you  
tap the icon, it displays the remaining  
battery power of your CLIÉ handheld  
as a percentage, and free memory  
space in your CLIÉ handheld or a  
“Memory Stick” media. When your  
CLIÉ handheld is being charged,  
is displayed.  
B CLIE Launcher groups list  
The list of CLIE Launcher groups is  
displayed.  
C Favorite Applications  
(shortcuts)  
You can create shortcuts to favorite  
applications.  
D Home icon  
Tap to display the CLIE Launcher or  
®
Palm OS Standard screen.  
Continued on next page  
• • • • • • • • • • • • • •65• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
H Application Manager icons  
I Application icon  
You can manage your applications  
with the application manager icons.  
The following are featured as  
standard functions.  
J Position indicator  
K Calculator  
Tap to display the on-screen  
Calculator.  
: Beam  
: Info  
L Find icon  
Tap to display the dialog box finding  
data or applications.  
: Delete  
M Graffiti 2 writing area  
Write strokes of Graffiti 2 here.  
Decuma Input can be launched  
b For details, refer to “CLIÉ™ handheld  
basic operations: Using CLIE  
Launcher: Application manager icons”  
in “Handbook” (PDF format).  
from this area.  
b For details, refer to “Entering text on  
your CLIÉ™ handheld: Using Decuma  
Input to enter text” in “Handbook”  
(PDF format).  
Tip  
Functions of application manager icons  
may be added when you install certain  
applications.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Status Information  
You can display the Status Info dialog box by dragging the stylus from the  
Graffti 2 writing area toward the upper left of the screen.  
b
The status information displays the following icons. Additional icons will be displayed  
according to the applications in use. Tap each icon to get further information in detail.  
Displays the battery’s remaining charge.  
charged.  
is displayed while the battery is being  
Tap to display the Battery Information dialog box.  
Power: Power used  
Status: Battery status  
Remain: Remaining charge of the battery  
(This is not displayed while being charged.)  
Tap [Limits] to display the Battery Limits dialog box.  
Continued on next page  
• • • • • • • • • • • • • •67• • • • • •  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Each icon indicates the information on the “Memory Stick” media inserted into your  
CLIÉ handheld.  
“Memory Stick” media is inserted.  
“Memory Stick” media is not inserted.  
“Memory Stick” media is write-protected.  
“Memory Stick” media is not read correctly.  
A “Memory Stick” compatible device is inserted.  
Tap the icon to display the Media Info dialog box when “Memory Stick” media is  
inserted.  
1 Media type  
You can choose another device by tapping  
V next to [Device:].  
2 Tap to display CLIE Files.  
3 Tap to display Data Import.  
4 Tap to display the Device Detail dialog  
box for information on the device or driver.  
From the Media Info dialog box, tap  
(Menu) and then tap [Preferences...] from  
[Option] to select operations for “Memory Stick” media.  
Tap to display the Adjust Volume dialog box.  
1 Turns off the sound of your CLIÉ handheld.  
When Muting mode is selected, is  
displayed in the Status Info dialog box*.  
2 Adjusts the volume level for playing back  
audio files*.  
3 Adjusts the volume level for System sound,  
Alarm sound, and Game sound. This affects  
the [General] settings in Preferences.  
b For details, refer to “Customizing your  
CLIÉ™ handheld (Preferences): Setting  
sounds” in “Handbook” (PDF format).  
* Available for PEG-TJ35 only.  
Tip  
When a dialog box or screen such as the below is displayed  
Tap the icon to display tips and helpful advice.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching the protective soft cover to your CLIÉ  
handheld  
Place the tabs into the cover slots of your CLIÉ handheld (1), then slide the  
cover upwards until it locks into place (2).  
Removing the protective soft cover from your CLIÉ  
handheld  
Slide the cover downwards (1), then remove it (2).  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
z
INDEX  
A
M
AC power adapter . . . . . . . . . . . . . 6, 8  
Applications  
“Memory Stick” LED. . . . . . . . . . . . . 63  
“Memory Stick” Slot. . . . . . . . . . . . . 63  
Installing. . . . . . . . . . . . . . . . . . . . 20  
Quitting . . . . . . . . . . . . . . . . . . . . 23  
Starting. . . . . . . . . . . . . . . . . . . . . 22  
P
Palm™ Desktop for CLIÉ . . . . . . . . . 15  
B
R
Backup . . . . . . . . . . . . . . . . . . . . . . . 41  
Basic Operations. . . . . . . . . . . . . . . . 21  
Battery considerations . . . . . . . . . . . 54  
Restarting  
Hard reset . . . . . . . . . . . . . . . . . . . 33  
Soft reset. . . . . . . . . . . . . . . . . . . . 32  
C
S
CLIE Launcher. . . . . . . . . . . . . . . . . . 65  
CLIÉ Manuals . . . . . . . . . . . . . . . . . . 35  
Components . . . . . . . . . . . . . . . . . . . 59  
Set date. . . . . . . . . . . . . . . . . . . . . . . 12  
Set time. . . . . . . . . . . . . . . . . . . . . . . 11  
Setting up . . . . . . . . . . . . . . . . . . . . . . 8  
Specifications . . . . . . . . . . . . . . . . . . 57  
Status Information . . . . . . . . . . . . . . 67  
Stylus . . . . . . . . . . . . . . . . . . . . . . . . 10  
D
Decuma Input . . . . . . . . . . . . . . . . . . 28  
E
T
Entering text. . . . . . . . . . . . . . . . . . . 26  
Tapping. . . . . . . . . . . . . . . . . . . . . . . 10  
Time zone . . . . . . . . . . . . . . . . . . . . . 12  
H
U
HotSync® operation . . . . . . . . . . . . . 29  
USB cable . . . . . . . . . . . . . . . . . . . . . 18  
USB port . . . . . . . . . . . . . . . . . . . . . . 18  
I
Initial setup. . . . . . . . . . . . . . . . . . . . . 9  
IR port. . . . . . . . . . . . . . . . . . . . . . . . 64  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
On the trademarks  
Before using your CLIÉ handheld, make sure to read the accompanying End-User’s License  
Agreement.  
• Sony, CLIÉ, “Memory Stick”, “Memory Stick Duo”, “Memory Stick PRO”, “MagicGate  
Memory Stick”, Jog Dial, and their logos are trademarks of Sony Corporation.  
• Palm, Palm Powered, the Palm logo, the Palm Powered logo, Palm OS, Graffiti, HotSync  
and the HotSync logo are trademarks of PalmSource, Inc.  
®
• Graffiti 2 powered by Jot .  
• Microsoft and Windows are registered trademarks of Microsoft Corporation.  
• Pentium is a registered trademark of Intel Corporation.  
• Intellisync is a trademark of Pumatech, Inc.  
• Adobe and Acrobat are trademarks of Adobe Systems Incorporated.  
• QuickTime and the QuickTime logo are trademarks of Apple Computer, Inc.  
• Picsel and the Picsel logo are trademarks of Picsel Technologies, Ltd.  
• Decuma is a trademark of Decuma AB in the United States and other countries.  
• This product includes fonts owned by TypeBank Co., Ltd. under license.  
• All other trademarks are trademarks of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For the latest information on support  
and accessories,  
check our official Sony CLIÉ website  
For customers in the U.S.A. and Canada  
For customers in Australia, Hong Kong, Malaysia,  
Mexico, New Zealand, Singapore, Taiwan,  
Thailand, and U.A.E.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sierra Monitor Corporation Air Cleaner IZS30 SERIES User Manual
Silex technology Network Card Sewing Machine Wireless Network Adapter User Manual
Silex technology Network Card SX 1000U User Manual
Sonance Speaker VP89R User Manual
Sony Car Stereo System XR C5600X User Manual
Sony Radio 334 User Manual
Speco Technologies DVR DVR16TS750 User Manual
Star Manufacturing Food Warmer SDW1 User Manual
Sterling Plumbing Product E045000 User Manual
Sylvania CRT Television SRT2313 SRT2319 User Manual