3-810-645-12(1)
Names of Parts
Features
p (Stop)
= (Previous track)
+ (Next track)
0 (Rewind)
) (Fast forward)
r (Recording)
T. REC (Time Machine Recording)*
* The T. REC button can be used only if your MD deck has the Time
Machine Recording function.
1 CD-SYNC operation
2 MD basic function 3 Editing operation
•
Can create titles for your recorded MDs and tracks by using uppercase
and lowercase letters, numbers and symbols.
buttons
buttons
buttons
•
•
Can be used to control the basic operations of an MD deck.
Can be used for synchro-recording with a CD player with some MD
decks.
Re m o t e Co m m a n d e r fo r
Min iDisc
•
Can switch among MD editing functions at the touch of a single button,
and can be used to perform all editing operations.
3 Editing operation buttons
ERASE (Erases recorded tracks)
DIVIDE (Divides recorded tracks)
COMBINE (Combines recorded tracks)
MOVE (Moves recorded tracks)
UNDO (Cancels the last edit)*
ENTER (YES button)
Unsupported models:
Operating Instructions
Mode d‘emploi (au dos)
MDS-101, MDS-102, MDS-S1, MDS-S30, MDS-S35, MDS-501, MDS-302,
MDS-303, MDS-JA3ES, MDS-MX1, CMT-M1, DHC-MD1, ZS-M1,
PMC-M2, MZ-1, MZ-R2, MZ-R3
CANCEL (NO button)
* The UNDO button can be used only if your MD deck has the Undo
function.
Precautions
4 Title input buttons
4 Title input buttons
5 Display function buttons
NAME (Switches to title input mode)
CAPS (Uppercase letters, numbers, symbols)*
SML (Lowercase letters, numbers, symbols)*
(Unlabeled button: space)
On safety
1 CD-SYNC operation buttons (CD synchro-recording)
These buttons can be used only if the remote supplied with your MD deck
also has these buttons.
•
Do not drop or step on the remote. Do not spill liquids on the remote.
Do not leave the remote in direct sunlight, near a heat source, or in a
humid environment.
•
STOP (CD synchro-recording stop)
Character buttons (60 buttons)
START (CD synchro-recording start)
STANDBY (CD synchro-recording standby)
P (CD player – Pause)
= (CD player – Previous track)
+ (CD player – Next track)
* The CAPS and SML buttons have indicators that light when the button in
question is selected.
On cleaning
Clean the cabinet, panel and controls with a soft cloth slightly moistened
with a mild detergent solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or benzine.
5 Display function buttons
SCROLL (Use to review track titles during playback.)
RM-D11P
DISPLAY (While MD is paused: Use to check the total number of tracks, the
total playback time, the MD time remaining, and disc title. While MD is
playing: Use to check the time remaining on the track and the track title.)
2 MD basic function buttons
( (Play)
Sony Corporation 1996 Printed in Japan
P (Pause)
Labeling Tracks and MDs
Using the Editing Operation Buttons
Specifications
Inserting Batteries
Operating distance (approx.)
Power requirements
Battery life
7 m
1
Press NAME.
In order to switch editing functions, first press the desired editing
operation button (ERASE, DIVIDE, COMBINE, MOVE, or UNDO), and
then press the ENTER button.
Insert two R6 (size-AA) batteries by matching the + and – on the batteries.
Switches the remote to title input mode.
When using the remote, point it at the remote sensor g on the MD deck.
3 V DC, two R6 (size-AA) batteries
About 6 months
(Depends on frequency of use.)
To label
Make sure that the deck is
ENTER: Serves the same function as the “YES” button on the MD deck.
A track
Playing, pausing, recording the track to be labeled, or
stopped after locating the track to be labeled
CANCEL: Serves the same function as the “NO” button on the MD deck.
Dimensions (approx.) (w/h/d)
191 x 32 x 110 mm
(7 5/ x 1 5/ 16 x 4 3/ 8 in.)
8
}
]
An MD
Stopped with no track number appearing in the display
Mass (approx.)
225 g (8 oz) (Not incl. batteries)
R6 (size-AA) batteries (2)
Supplied accessories
2
Select the character type.
Synchro-Recording With a Sony Video
CD Player
To select uppercase letters, press CAPS. To select lowercase letters,
press SML. The selected button lights up.
Design and specifications are subject to change without notice.
3
4
Enter one character at a time.
This remote allows you to switch between synchro-recording with a Sony
CD player or synchro-recording with a Sony video CD player.
To select the video CD player, press button number 2 while pressing
down the space button.
z When to replace batteries
Repeat steps 2 and 3 until you have entered the entire title.
Troubleshooting
With normal use, the batteries should last for about six months.
When the remote no longer operates the deck, replace all the batteries
with new ones.
If you entered the wrong character
Press 0 or ) until the character to be corrected starts flashing.
Press CANCEL to erase the incorrect character, then enter the correct
one.
To select the CD player, press button number 1 while pressing down the
space button.
If you experience any of the difficulties while using the remote, use this
troubleshooting guide to help you remedy the problem. Should any
problem persist, consult your nearest Sony dealer.
The remote is factory set to synchro-recording with a CD player.
Notes
5
Press NAME again.
The remote is too far away from the MD deck.
• Do not leave the remote near an extremely hot or humid place.
• Do not drop any foreign object into the remote casing, particularly
when replacing the batteries.
The entered title appears in the display after the label has been
recorded.
/ Use the remote no farther than 7 m from the MD deck.
There is an obstacle in front of the remote sensor on the MD deck.
When Using This Remote With the MD
Deck MDS-S37
• Do not expose the remote sensor to direct sunlight or lighting
apparatuses. Doing so may cause a malfunction.
• If you don’t use the remote for an extended period of time, remove the
batteries to avoid possible damage from battery leakage and corrosion.
To cancel labeling
Press p.
/ Remove the obstacle.
The batteries have run down.
/ Replace both batteries.
When labeling with the MDS-S37, be sure to first disconnect the AU bus
cable.
Changing an existing title
1 Do step 1 of “Labeling Tracks and MDs.”
2 Keep pressing CANCEL until the current title is erased.
3 Do steps 2 to 5 of “Labeling Tracks and MDs.”
The remote sensor is exposed to intense light.
/ Do not expose the remote sensor to direct sunlight or lighting
apparatuses.
Note
Characters cannot be input by this remote if the MDS-S37 AU bus cable is
connected.
Download from Www.Somanuals.com. All Manuals Search And Download.
|