4-156-541-83(1)
Linear PCM Recorder
Operating Instructions
PCM-M10/PCM-M10P
© 2009 Sony Corporation
Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Step 1: Checking the Contents of the
To operate with an AC power
Setting the clock after inserting
Step 5: Setting the Language to Be
Recording using the remote
Recording a few seconds in advance –
Recording across memory media –
Cutting out low frequency –
Preventing Accidental Operation –
Locking the buttons of the
Unlocking the buttons of the
Preventing sound distortion–
Recording with an external
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Listening the playback sounds
speakers ..............................................50
Copying Files from Your Computer
Them Back ..............................................88
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
What you record is for personal
enjoyment and use only. Copyright laws
prohibit other forms of use without the
permission of the copyright holders.
The use of Memory Stick™ media for
recording copyright-protected graphics or
other data is limited to the restrictions
specified under applicable copyright
laws. Any use beyond those restriction is
prohibited.
This product is compatible with
Memory Stick Micro™ (M2™) media.
M2™ is the abbreviated product name for
a Memory Stick Micro™.
In this booklet, M2™ is used to describe
Memory Stick Micro™ media.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Techniques for Better Recording
The PCM-M10/M10P linear PCM recorder allows you to enjoy high-quality recording in a
variety of situations. This section introduces easy recording setups for 6 typical music scenes.
For recording a solo acoustic
guitar performance
For recording a piano performance
z Tips for setup
• Use a tripod or other device to set the PCM
recorder level with the piano keyboard.
z Tips for setup
• Set the PCM recorder approximately 1.5
meters from the piano.
• Use a tripod or other device to set the PCM
recorder about 1 meter from the guitar.
• Set the PCM recorder so that its built-in
microphones face the sound box of the
guitar.
• To start, stop recording, or add track marks
remotely, use the supplied remote
commander.
REC LEVEL
AUTO
MIC SENS(ATT) • When recording near the
piano: LOW
• When recording far from
the piano: HI
REC LEVEL
AUTO
HI
MIC SENS(ATT)
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6
For recording a jazz trio
performance
For recording a band performance
at a recording studio
z Tips for setup
z Tips for setup
• Use a tripod or other device to set the PCM
recorder.
• Adjust the orientation and height of the PCM
recorder, so that the built-in microphones
face the vocalist.
• Adjust the positions of guitar amplifier and
base amplifier so that their volume levels are
well-balanced.
• Use a tripod or other device to set the PCM
recorder as close to the lead instrument as
possible.
• While monitoring recording, move the PCM
recorder to the position where volume levels
from instruments are well-balanced.
REC LEVEL
AUTO
MIC SENS(ATT) • When recording near the
instrument: LOW
REC LEVEL
AUTO
LOW
• When recording far from
the instrument: HI
MIC SENS(ATT)
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
7
For recording an electronic piano
performance via a line connection
For recording a musical
performance of large number of
performers such as a children’s
chorus at a concert hall
z Tips for setup
• Connect the line output jack of an electronic
piano to the LINE IN jack of the PCM
recorder with a cable (not supplied).
z Tips for setup
• Adjust the recording level to the optimum
with the REC LEVEL dial.
• Set the PCM recorder as close to the
conductor or to the stage as possible.
• Set the PCM recorder so that the built-in
microphones face the performers.
REC LEVEL
LIMITER
MANUAL
ON (menu setting)
REC LEVEL
LIMITER
MANUAL
ON (menu setting)
z For better recording
• For the most natural and dynamic recording,
manual recording is recommended.
(Adjustment using the REC LEVEL dial is
required.)
• The PCM recorder provides a level guide
function that displays an error message when
an excessive recording level is detected
during automatic recording.
• To obtain the best recording results, perform
a trial recording in advance.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Getting Started
Step 1: Checking the Contents of the
Package
Linear PCM recorder (1)
Wind screen (PCM-M10P only)
CD-ROM (2)
• Sound Forge Audio Studio LE (1)
• Operating instructions as PDF files (1)
Operating Instructions
Remove the film on the display window
before you use the PCM recorder.
“Sound Forge Audio Studio LE” is a
software application that supports editing
and CD creation on your computer. For an
introduction to installation of the software,
see the “Sound Forge™ Audio Studio LE
Guide.”
Remote commander (1)
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate
this equipment.
USB connecting cable (1)
LR6 (size AA) alkaline batteries (2)
Hand strap (1)
Carrying pouch (1)
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
9
L
(repeat) A-B button
Index to parts and controls
M DISPLAY button
Front
N REC LEVEL (recording level) dial
O POWER/HOLD switch
P REMOTE jack
Q ACCESS indicator
R T-MARK (track mark) button
S Strap hole
Rear
A Peak level L/R (-12 dB/OVER)
indicators
B Display window
C DELETE button
D MENU button
E
(folder) button
F > FF/ v (fast-forward/up) button
G . FR/ V (fast-rewind/down) button
H x STOP button
T LINE IN (line input) jack
U MIC SENS(ATT) (microphone
sensitivity (attenuator)) HI/LOW (high/
low) switch
I X PAUSE button/indicator
J N PLAY/ENTER button/indicator*
K z REC (record) button/indicator
V m (microphone) jack (Plug In Power
compatible)*
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
10
W REC LEVEL (recording level)
Remote commander (supplied)
MANUAL/AUTO switch
X Hole for attaching the tripod (not
supplied)
Y Battery compartment
Z Speaker (on the basement)
wj Built-in microphones (stereo)
wk DPC (SPEED CTRL) (speed control)
ON/OFF switch
wl i/LINE OUT (headphone/line output)
jack
e;
USB connector
ea M2™/microSD memory card slot
es DC IN 3V jack
ed VOLUME (volume) +*/– button
1 X PAUSE button
2 x STOP button
3 OPR (Operation) indicator
4 Connecting plug
5 z REC button
* These buttons and jack have a tactile dot.
Use it as a reference point for operations, or
to identify each terminal.
6 T-MARK (track mark) button
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Step 2: Inserting the Batteries
1 Slide and lift the battery compartment lid
If the battery compartment lid is
detached
in the direction of the arrow.
2 Insert the two supplied LR6 (size AA)
alkaline batteries into the battery
compartment, and then close the lid.
If you drop the PCM recorder or handle it
roughly, the battery compartment lid may
become detached.
If this occurs, insert a projected part at one
end of the battery compartment lid into the
opening on the PCM recorder (1), and
then align the other projected part of the lid
along the slit of the PCM recorder (2) as
illustrated above. Then stand up the lid and
push it down until the lid is attached to the
PCM recorder.
Be sure to insert the batteries with the 3
and # ends in the right position.
When using rechargeable
batteries
You can use rechargeable batteries with the
PCM recorder. To use rechargeable
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
12
batteries, select “NiMH Battery” in the
“Battery Setting” submenu of the “Detail
Menu.” With this setting, the battery
remain indicator for the rechargeable
batteries will be displayed more precisely.
When to replace batteries
When using batteries, the battery indicator
on the display shows the battery condition.
Battery remain indication
: “Low Battery Level” appears.
Replace two old batteries with new
ones soon.
z Tips
• Even if fully-charged rechargeable batteries
are inserted, the battery indicator may not
show the full status.
• Use a charger to recharge batteries at room
temperatures.
m
: “Change Battery” appears and the
PCM recorder will stop operation.
z Tips
• Use the following charger and rechargeable
batteries for the PCM recorder:
– Nickel metal hydride rechargeable battery:
NH-AA-B2K
– Quick battery charger for nickel metal
hydride rechargeable batteries:
BCG-34HS2K
• Do not use manganese batteries for this PCM
recorder.
• When replacing the batteries, tracks
recorded are not deleted even when you
remove the batteries.
• When replacing batteries, the clock
continues moving for about 3 minutes after
you remove the batteries.
• When replacing batteries, turn off the power
of the PCM recorder.
• Do not mix different types of batteries.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
13
You can use an AC power adaptor that
supports:
• Output voltage: DC3V
• Output current: 1A
• Polarity of the plug
To operate with an AC
power adaptor
Insert a commercially-available applicable
AC power adaptor securely into the DC IN
3V jack until it stops to the end.
PNote
Operations of not all AC power adaptors are
supported.
to the DC IN
3V jack
to a wall
outlet
AC power
adaptor
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Step 3: Turning the PCM recorder On
Turning the power on
Turning the power off
Slide the POWER/HOLD switch in the
direction of “POWER” for more than
2 seconds, and an animation of “See You!”
is displayed.
z Tips
• The PCM recorder is accessing memory
while “Accessing...” appears on the display
or the ACCESS indicator flashes. During
this time, do not remove or insert batteries
and do not disconnect a commercially-
available applicable AC power adaptor, or
the USB connecting cable. Doing so may
damage the data.
• Even if you do not use the PCM recorder, the
batteries are consumed slightly. When you
are not going to use the PCM recorder for an
extend period of time, it is recommended
that you turn the power off and remove the
batteries.
• When the PCM recorder remains turned on
and in the stop mode for about 10 minutes or
longer, the window display turns off
Slide the POWER/HOLD switch in the
direction of “POWER” for more than
1 second. The PCM recorder is turned on,
and an animation of “Accessing...” is
displayed.
automatically and the PCM recorder enters
the sleep mode. You can operate the PCM
recorder by pressing a button.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Step 4: Setting the Clock
Setting the clock after
inserting batteries
1 Press > FF/ v or . FR/ V to set the
year, and then press N PLAY/ENTER.
Perform the same operations to set
month, day, hour, and minute in
sequence.
> FF/ v,
. FR/ V
MENU
N PLAY/
ENTER
x STOP
2 Press x STOP to return to the stop mode
display.
Recorded audio files (tracks) are named
using the date and time of the clock. By
setting the clock before recording, the
recording’s date and time will be correctly
saved.
When the PCM recorder is turned on before
the clock has been set, “Set Clock” appears
on the display. Then the “Clock” display of
the menu appears, and the year section
flashes in the display window.
Setting the clock using the
menu
While the PCM recorder is in the stop
mode, you can set the clock using the menu.
1 Select “Clock” in the menu in the stop
mode.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
16
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
3 Press > FF/ v or . FR/ V to set the
year, and then press N PLAY/ENTER.
Perform the same operations to set
month, day, hour, and minute in
sequence.
2 Press > FF/ v or . FR/ V to
select “Detail Menu,” and then press
N PLAY/ENTER.
4 Press x STOP to return to the stop mode
display.
3 Press > FF/ v or . FR/ V to
select “Clock,” and then press N
PLAY/ENTER.
PNotes
• If you do not press a button within 1 minute
of entering the clock setting data, the clock
setting mode is cancelled and the window
will return to the stop mode display.
• If you leave the PCM recorder for
approximately 3 minutes or longer, with no
batteries inserted, the clock is reset to the
default settings. In this case, set the clock
again.
2 Press > FF/ v or . FR/ V to select
the date, and then press N PLAY/
ENTER.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Step 5: Setting the Language to Be Used in
the Display Window
2 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTERT.
> FF/ v,
. FR/ V
MENU
3 Press > FF/ v or . FR/ V to select
N PLAY/
ENTER
“Language,” and then press N PLAY/
ENTER.
x STOP
You can select the language to be used for
tracks, menus, folder names, file names,
etc. from 11 languages.
1 Press MENU to enter the menu mode.
The menu mode window will be displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
18
4 Press > FF/ v or . FR/ V to select
the language that you want to use, and
then press N PLAY/ENTER.
You can select the following languages.
Deutsch (German), English,
Español (Spanish), Français (French),
Italiano (Italian), Русский (Russian),
(Japanese),
(Chinese),
(Thai).
(Korean),
(Chinese),
5 Press x STOP to return to the stop mode
display.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Preventing Accidental Operation – HOLD
Locking the buttons of the
PCM recorder
Unlocking the buttons of the
PCM recorder
Slide the POWER/HOLD switch towards
the center so that all buttons will be
unlocked.
PNote
When the HOLD function is activated during
recording, all the functions of the buttons of
the PCM recorder are locked to prevent
accidental operation. To stop recording, cancel
the HOLD function first.
z Tip
Even if the HOLD function is activated, you
can start, pause, or stop recording, or add track
marks by using the remote commander
connected to the PCM recorder.
Slide the POWER/HOLD switch in the
direction of “HOLD.”
“HOLD” will appear for approximately 3
seconds and all the functions of the buttons
of the PCM recorder are locked.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
20
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Basic Operations
Recording
PNote
Before making a recording, turn on the power of the PCM recorder.
Selecting a folder
1 Press
to display the folder selection window in the
stop mode.
2 Press > FF/ v or . FR/ V to select the folder in
which you want to record tracks ( FOLDER01-10).
> FF/ v
When you purchase the PCM recorder, there are 10
folders already available.
. FR/ V
3 Press N PLAY/ENTER.
N PLAY/
ENTER
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Starting recording (automatic recording)
1 Set the REC LEVEL switch to “AUTO,” and press
z REC in the stop mode to enter the recording standby
mode.
The z REC indicator lights in red and the X PAUSE
indicator flashes in orange (Recording Standby mode).
When you select “AUTO,” the recording level will be
adjusted automatically.
z REC
X PAUSE
The REC LEVEL dial adjustment is enabled when you
select “MANUAL.”
You can change the microphone sensitivity with the
MIC SENS(ATT) switch.
2 Turn the built-in microphones in the direction of the
source to be recorded, and press X PAUSE, or
N PLAY/ENTER.
Built-in
micro-
R
L
phones
Recording starts. The new track will be recorded at the
end in the selected folder.
X PAUSE
N PLAY/
ENTER
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
23
To stop recording
Press x STOP.
The ACCESS indicator flashes in orange and the PCM
recorder stops at the beginning of the current recording.
x STOP
Note while accessing
The PCM recorder is recording data and saving it in memory when the ACCESS indicator flashes
in orange. While the PCM recorder is accessing data, do not remove the batteries, plug or unplug an
AC power adaptor or connecting cables. Doing so may damage the data.
Other operations
pause recording
Press X PAUSE. During recording pause, “
display window.
” flashes in the
release pause and resume Press X PAUSE again or press N PLAY/ENTER. Recording
recording
resumes from that point. (To stop recording after pausing recording,
press x STOP.)
z Tips
• You can record up to 99 tracks in each folder.
• When an excessive recording level (exceeding –1 dB) is detected during the recording standby
mode, the peak level L/R OVER indicators light in red and the following level guide is displayed.
You may solve the problem by moving the PCM recorder far from the sound source, or setting the
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
24
• When a memory card is being inserted, you can continue recording a track by changing the folder
to save the track from the internal memory to the memory card automatically after the internal
• When you connect the supplied wired remote commander to the PCM recorder, you can also
press z REC, X PAUSE, and x STOP on the remote commander to perform recording
operations.
• Before you start recording, we recommend you make a trial recording first.
PNotes
• Operating or touch noises may be recorded if an object, such as your finger, etc., accidentally rubs
or scratches the PCM recorder during recording.
• You do not need to press and hold z REC while recording.
• In automatic recording, the REC LEVEL dial adjustment and the LIMITER setting will not work.
Listening the recording with headphones (not supplied) – Monitoring
If you connect headphones (not supplied) to the i/LINE OUT (headphone/line output) jack,
you can monitor the recording. You can adjust the monitoring volume by pressing VOLUME
+/–, but the recording level is fixed.
PNote
i/LINE OUT
(headphone/line
output) jack
Make sure that “Audio Out” in the menu
is set to “Headphones.” If “LINE OUT” is
selected, do not connect headphones; the
playback sound from the headphones will
be very loud.
The “Audio Out” in the menu is set to
“Headphones,” when you purchase the
VOLUME +/–
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Listening
PNote
Before the playback starts, turn on the power of the PCM recorder.
Before you start playback
Connect headphones (not supplied) to the i/LINE OUT
(headphone/line output) jack for better playback sound.
i/LINE
OUT jack
PNote
Make sure that “Audio Out” in the menu is set to
“Headphones.” If “LINE OUT” is selected, do not connect
headphones; the playback sound from the headphones will be
very loud.
Headphones
plug
The “Audio Out” in the menu is set to “Headphones,” when
To start playback
1 Press
in the stop mode.
2 Press > FF/ v or . FR/ V to select the folder.
> FF/ v
. FR/ V
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
26
3 Press N PLAY/ENTER.
N PLAY/
ENTER
4 Press > FF/ v or . FR/ V to select the track you
> FF/ v
want to play.
. FR/ V
5 Press N PLAY/ENTER.
Playback will start soon, and the N PLAY/ENTER
indicator will light in green. (When “LED” is set to
light.)
N PLAY/
ENTER
6 Press VOLUME +/– to adjust the volume.
VOLUME +/–
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
27
To stop playback
Press x STOP.
x STOP
The PCM recorder stops at the current position. To resume
playback from that point, press N PLAY/ENTER.
N PLAY/
ENTER
Other operations
stop at the current position Press X PAUSE. To resume playback from that point, press X
(Playback Pause function) PAUSE again or press N PLAY/ENTER.
During playback pause, “
” flashes in the display window.
1
go back to the beginning of Press . FR/ V once.*
the current track
2
go back to previous tracks Press . FR/ V repeatedly.*
(During the stop mode, keep the button pressed to go back the tracks
3
continuously.)*
1
skip to the next track
Press > FF/ v once.*
2
skip to the succeeding
tracks
Press > FF/ v repeatedly.*
(During the stop mode, keep the button pressed to skip the tracks
3
continuously.)*
4
Fast forward (Cue)
Press and hold the > FF/ v during playback.*
4
Fast reverse (Review)
Press and hold the . FR/ V during playback.*
*1 When a track mark is set, the PCM recorder goes backward or forward to the track mark before or
after the current point.
*3 In the continuous searching mode, the PCM recorder does not locate track marks.
*4 If you press and hold the button, the PCM recorder goes forward or backward slowly at first, and then
at gradually higher speed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
28
z Quickly locating the point you want to start playback (Easy Search)
By setting “Easy Search” to “ON” in the menu, you can go back approximately 3 seconds by
pressing . FR/ V, or advance approximately 10 seconds during playback by pressing > FF/
z Tracks that the PCM recorder can play back
In addition to the tracks that the PCM recorder has recorded as LPCM (WAV) or MP3 files, the
PCM recorder can play back WMA, AAC-LC (m4a), MP3, and LPCM (WAV) files copied from
your computer or other external device.
To select a folder
The PCM recorder saves the tracks it has recorded and the files copied from your computer or
other external device in the following folder structure. There are two types of folders, which
can be distinguished by the folder indicators in the display window as follows:
Folder selection window
:
Folder for tracks recorded using the
PCM recorder
(FOLDER01-FOLDER10) (They
have already been made when you
purchase the PCM recorder.)
MUSIC
:
Folder copied from a computer
(These folders are displayed when
music files have been copied from a
computer.)
Part of the folder structure of the
internal memory
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Deleting
PNotes
• Once a track has been deleted, you cannot retrieve it.
• Before deleting the track, turn on the power.
Selecting a track and deleting it
1 Select the track you want to delete when the PCM
recorder is in the stop or playback mode.
2 Press DELETE.
DELETE
“Delete?” appears with the track title.
3 Press > FF/ v or . FR/ V to select “Execute.”
> FF/ v
. FR/ V
4 Press N PLAY/ENTER.
“Deleting...” appears in the display window and the
selected track will be deleted.
N PLAY/
ENTER
When a track is deleted, the remaining tracks will
advance so that there will be no space between tracks.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
30
To cancel deleting midway
Select “Cancel” in step 3 of “Selecting a track and deleting
N PLAY/
ENTER
Deleting another track
Deleting a part of a track
Use the Divide function in the menu to divide a track into two first, one you want to delete
and the other you do not want to delete. Then proceed with the steps 1 through 4 in “Selecting
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Other Recording Operations
Changing the Recording Method
recording, pausing and stopping recording,
and adding track marks.
You can operate the PCM recorder even
while it is in the hold state.
Recording using the remote
commander
z Using the remote commander for
better recorded sound
• By operating the PCM recorder using the
remote commander, you can prevent the
PCM recorder from picking up noises which
may be caused by accidentally pressing a
button, touching the case, or holding the
PCM recorder.
to REMOTE
jack
• By placing the PCM recorder at the most
suitable position for recording (e.g. at the
center of multiple players, or near the stage),
and by starting and stopping recording
remotely, you can obtain a more lively and
natural stereo sound recording.
You can use the supplied wired remote
commander to perform recorder operations
remotely. Insert the remote commander
plug securely into the REMOTE jack.
Press the appropriate buttons on the remote
commander to perform operations such as
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
32
1 Set the REC LEVEL switch to
Manual recording
“MANUAL.”
Built-in
microphones
2 Select a folder.
REC LEVEL
3 Press z REC.
The PCM recorder enters the recording
standby mode. When the microphones
pick up sound, the level meter in the
display window moves.
z REC
N PLAY/ENTER
x STOP
> FF/ v,
. FR/ V
4 Adjust the recording level with the REC
When you set the REC LEVEL switch to
“MANUAL,” you can adjust the recording
level manually, according to the sound
source. If necessary, you can also utilize the
sound distortion.
LEVEL dial.
You can check the recording level with
both the peak meter of the display
window and the peak level indicators.
Adjust the level closer to –12 dB, into a
range that is appropriate for your sound
source.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
33
If the peak level OVER indicator lights
in red when the recording level exceeds
Recording a few seconds in
advance –
the Pre-Recording function
–1 dB, or “
” appears on the
display window, distortion may occur.
Reduce the recording level.
Adjust the
OVER indication
MENU
maximum level
of the sound to
about –12 dB.
z REC
5 Make other settings for recording, such
N PLAY/
ENTER
6 To start recording, press X PAUSE or
x STOP
N PLAY/ENTER.
> FF/ v,
. FR/ V
The pre-recording function allows you to
record sound sources for approximately 5
seconds prior to the point when recording is
actually started.
7 To stop recording, press x STOP.
This is useful for recording during
interviews or when making an open-air
recording so that you will not miss an
opportunity to start recording.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Sounds for 5 seconds are
buffered in the memory
Press X PAUSE or
Press z REC to
enter the recording
standby mode.
NPLAY/ENTER.
Recording
starts.
4 Press > FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
2 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTER.
5 Press x STOP to exit the menu mode.
6 Select a folder.
7 Press z REC.
The PCM recorder enters the recording
standby mode. Pre-recording starts and
sounds for a maximum of the last 5
seconds are buffered in the memory.
3 Press > FF/ v or . FR/ V to select
“PRE REC,” and then press N PLAY/
ENTER.
Displays how
long the sound
isbufferedinthe
memory.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
35
8 To start recording, press X PAUSE or
Recording on a memory
card
N PLAY/ENTER.
The standby for recording mode is
released, and recording continues from
the sound buffered in step 7.
9 To stop recording, press x STOP.
PNotes
> FF/ v,
. FR/ V
• If you start recording with the pre-recording
function using the built-in microphones, a
click noise may be recorded when you press
z REC. To record with the pre-recording
function, we recommend you use the
supplied wired remote commander or an
external microphone.
MENU
N PLAY/ENTER
• When the remaining recordable time is less
than 10 seconds, the pre-recording function
is disabled. Before starting to use the pre-
recording function, delete unwanted files.
Insert M2™ with the terminal side
facing toward you .*
• If you stop recording before step 8, sounds
buffered in the memory will not be saved.
*whenyouareinserting
a memory card with
the back side of the
PCM recorder facing
toward you.
To cancel the pre-recording
function
Set “PRE REC” to “OFF” in step 4.
Insert microSD card with the label
side facing toward you.*
In addition to the built-in memory, you can
record a track on a memory card.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
36
In this manual, M2™ and microSD
memory cards are generally referred to as a
“memory card.”
About compatible memory cards
Memory cards that you can use with the
PCM recorder are as follows:
• Memory Stick Micro™ (M2™) media:
Up to16 GB is supported. For compatible
M2™, please refer to the Sony web site
(page 95).
The M2™/microSD card slot is referred to
as the “memory card slot.”
Due to the file system specifications of the
PCM recorder, you can record and play
back an LPCM file smaller than 2 GB, and
an MP3, AAC-LC, or WMA file smaller
than 1 GB using a memory card.
• microSD card:
A microSD (FAT16) card smaller than
2 GB and a microSDHC (FAT32) card
from 4 GB to 16 GB are supported.
A memory card of 64 MB or less is not
supported.
The maximum number of tracks you can
record on a memory card is 5,000.
PNote
Operations of all types of compatible memory
cards are not guaranteed.
The microSD/microSDHC cards that have
been operationally tested according to our
standards are as follows.
Inserting a memory card
Before recording, be sure to copy all the
data saved on the memory card to your
computer and format the memory card on
the PCM recorder so it contains no data.
Supplier 1 GB 2 GB 4 GB 8 GB 16 GB
Toshiba
a
a
a
a
a
a
a
a
a
a
a
a
a
a
a
Panasonic
SanDisk
1 Open the cover of the memory card slot
in the stop mode.
a :Operation tested
:Operation not tested
As of September 2009
2 Insert an M2™ or microSD card, in the
direction shown in the illustration on
page 36, securely to the end of the slot
until it clicks into place. Then close the
cover.
–
For the PCM recorder, the operational tests
performed were using microSD/microSDHC
cards available as of September 2009.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
37
To remove a memory card
Be sure that the ACCESS indicator is off,
and then push the memory card into the
slot. When it pops out, remove it from the
memory card slot.
Using a memory card for
recording and playback (Memory
setting)
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
On folder and track file structure
Ten folders are created in a memory card in
addition to those in the built-in memory.
The structure of folders and track files is
somewhat different from that of the built-in
2 Press > FF/ v or . FR/ V to select
“Memory,” and then press N PLAY/
ENTER.
PNotes
• Do not insert or remove a memory card
during recording/playback. Doing so may
cause a malfunction of the PCM recorder.
• Do not remove a memory card while
“Accessing...” appears on the display
window or the ACCESS indicator flashes in
orange. Doing so may damage the data.
• If a memory card is not recognized, remove
it and then insert it into the PCM recorder
again.
3 Press > FF/ v or . FR/ V to select
“Memory Card,” and then press N
PLAY/ENTER.
• Close the cover of the memory card slot
firmly. Also, do not insert any liquid, metal,
flammable or any object other than a
memory card into the slot. Doing so may
cause fire, electric shock, or malfunctions.
4 Press x STOP to exit the menu mode.
To use the built-in memory
Select “Built-In Memory” in step 3.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
38
recorder automatically switches its
destination to the other memory media and
continues recording (Cross-Memory
Recording).
To start recording
Select the folder and press z REC to enter
recording standby mode. Then press X
PAUSE or N PLAY/ENTER to start
recording.
1 Press MENU to enter the menu mode.
For automatic recording, see “Recording”
on page 22. For manual recording, see
The menu mode window will be
displayed.
2 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTER.
Recording across memory
media –
Cross-Memory Recording
> FF/ v,
3 Press > FF/ v or . FR/ V to select
“Cross-Memory Recording,” and then
press N PLAY/ENTER.
. FR/ V
MENU
N PLAY/
ENTER
x STOP
When the memory currently being used
becomes full during recording, the PCM
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
39
4 Press > FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
When the recording stops, the PCM
recorder stops at the beginning of the new
track.
PNotes
• If the other memory media is also full, a
message is displayed and the PCM recorder
stops recording.
• When you play back the original track
recorded with Cross-Memory Recording, the
PCM recorder does not play the succeeding
track automatically.
5 Press x STOP to exit the menu mode.
To cancel Cross-Memory
Recording
Select “OFF” in step 4.
• Before attempting Cross-Memory
Recording, check to see if the memory card
is detected in the “Memory” menu in
When the current memory media
becomes full during recording
The following message appears on the
display window. Recording continues as a
new track in a recordable folder of the
smallest folder number available for the
other memory media.
A new track is created with a new file
name.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
40
Changing the Recording Settings
• LPCM (Linear PCM): This is a WAV file
Selecting the recording
mode
and you can record the sound without
compression, providing higher quality
than MP3. On the other hand, the file size
is large, it takes time to copy to a
computer, and the available recording
time in the PCM recorder is shorter than
MP3. We recommend this recording
mode for recording when the sound
quality is important.
• MP3: A standard method of sound
compression, which can be played back
using many different kinds of computers.
> FF/ v,
. FR/ V
MENU
N PLAY/
ENTER
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
x STOP
You can select the recording mode in the
menu when the PCM recorder is in the stop
mode.
2 Press > FF/ v or . FR/ V to select
“REC Mode,” and then press N PLAY/
ENTER.
About the recording modes
The PCM recorder is compatible with 2
types of recording modes: LPCM (Linear
PCM) and MP3. The features offered by
each are as follows.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
41
3 Press > FF/ v or . FR/ V to select
the desired recording mode, and then
press N PLAY/ENTER.
z About the sampling frequency
and quantifying bit number
• Sampling frequency is a value that
represents how many times an analog signal
is converted into a digital signal (A/D
conversion) per second. The larger the value
of sampling frequency, the better the sound
quality, but also the larger the amount of
data.
• Quantifying bit number is a value that
represents the amount of data it takes for
1second of audio. The larger the value of the
bit number, the larger amount of data it takes
and the better the sound quality.
LPCM (Not
LPCM 22.05kHz/16bit
compressed)
LPCM 44.10kHz/16bit*
LPCM 44.10kHz/24bit
LPCM 48.00kHz/16bit
LPCM 48.00kHz/24bit
LPCM 96.00kHz/16bit
LPCM 96.00kHz/24bit
mode
You can
record with
higher sound
quality.
Setting the microphone
sensitivity
MP3
(compressed)
mode
MP3 44.10kHz/64kbps**
MP3 44.10kHz/128kbps
MP3 44.10kHz/320kbps
You can
record with
higher sound
quality.
*
default setting
** for a long-time recording
4 Press x STOP to exit the menu mode.
PNote
You cannot set the recording mode while
recording.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
42
You can set the sensitivity of the built-in
microphones and an external microphone
connected to the m (microphone) jack of
the PCM recorder. Switch the MIC
SENS(ATT) switch according to the
recording conditions or to suit your
purposes, when the PCM recorder is either
stopped or is recording.
Cutting out low frequency –
the LCF function
> FF/ v,
. FR/ V
HI (high)* Usually select this position.
• The microphone attenuator is
set to “HI.” (In manual
recording)
MENU
• The microphone sensitivity is
set to high. (In automatic
recording)
N PLAY/
ENTER
x STOP
LOW
Select this position to record a
sudden loud sound.
• The microphone attenuator is
set to “LOW.” (In manual
recording)
• The microphone sensitivity is
set to low. (In automatic
recording)
When you set the LCF(Low Cut Filter)
function to “ON” in the stop or recording
mode, you cut out a low frequency to
reduce the air conditioner noise, roaring
noise from wind, etc.; therefore you can
record a track more clearly.
* The microphone sensitivity is set to “HI” when
you purchase the PCM recorder.
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
43
2 Press > FF/ v or . FR/ V to select
“LCF(Low Cut Filter),” and then press
N PLAY/ENTER.
Preventingsounddistortion–
the LIMITER function
> FF/ v,
. FR/ V
3 Press > FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
MENU
N PLAY/
ENTER
x STOP
During the stop or recording mode, you can
set the LIMITER function.
The LCF function is set to “OFF” when
you purchase the PCM recorder.
When the “LIMITER” is set to “ON,” the
input sound that is too loud is adjusted
automatically to the maximum input level
to prevent sound distortion.
4 Press x STOP to exit the menu mode.
To cancel the LCF function
Set “LCF(Low Cut Filter)” to “OFF” in
step 3.
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
44
2 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTER.
To cancel the LIMITER function
Set “LIMITER” to “OFF” in step 4.
PNotes
• When the REC LEVEL switch is set to
“AUTO,” the LIMITER function does not
work.
• When the “LIMITER” is set to “ON,” the
limiter function of the PCM recorder covers
the input from the maximum input level to
+12 dB. If the input exceeds this limit,
sounds may be distorted.
3 Press > FF/ v or . FR/ V to select
“LIMITER,” and then press N PLAY/
ENTER.
4 Press > FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
The LIMITER function is set to “OFF”
when you purchase the PCM recorder.
5 Press x STOP to exit the menu mode.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Recording via Other Devices
You can record from an external
Recording with an external
microphone
microphone. When an external microphone
is connected, the built-in microphones and
the input from the LINE IN jack become
disabled.
Stereo
microphone
1 Connect an external microphone to the
m (microphone) jack when the PCM
recorder is in the stop mode.
m (microphone) jack
“Plug In Power” appears in the display
window.
> FF/ v,
. FR/ V
If “Plug In Power” is not displayed, set it
2 Press> FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
REC LEVEL
z REC
N PLAY/ENTER
When a plug in power type microphone
is connected, power is automatically
supplied to the microphone from the
PCM recorder.
X PAUSE
x STOP
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
46
3 Press x STOP to exit the menu mode.
Recording from other
equipment
4 Set the REC LEVEL switch to “AUTO”
for automatic recording, or “MANUAL”
for manual recording.
Tape recorder or CD
player
Audio
5 Press z REC.
connecting
The PCM recorder enters the recording
standby mode. The built-in microphones
and input from the LINE IN are
automatically cut off.
cable
LINE IN
You can adjust the microphone
sensitivity with the MIC SENS(ATT)
REC LEVEL
6 To start recording, press X PAUSE or
N PLAY/ENTER.
z REC
7 When “MANUAL” has been selected in
step 4, adjust the recording level with the
REC LEVEL dial.
N PLAY/ENTER
X PAUSE
8 To stop recording, press x STOP.
z Recommended microphones (not
x STOP
supplied)
We recommend you use the Sony
ECM-MS957 electret condenser microphone.
You can make music files without using the
computer by recording the sound from
other equipment connected to the PCM
recorder. When an external equipment is
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
47
connected, the built-in microphones
become disabled.
z Recommended audio connecting
cable (not supplied)
We recommend you use Sony RK-G129 audio
connecting cable (not supplied).
1 Connect an external equipment to the
PCM recorder in the stop mode.
PNote
Connect the audio output jacks (stereo
minijack) of external equipment to the
LINE IN jack of the PCM recorder using
a Sony audio connecting cable (not
supplied).
When both m (microphone) jack and LINE IN
jack are connected with an external
microphone and an external device
respectively, the input from the m
(microphone) jack has the priority. When
using the input from the LINE IN jack, remove
an external microphone from the m
(microphone) jack.
2 Set the REC LEVEL switch to “AUTO”
for automatic recording, or “MANUAL”
for manual recording.
3 Press z REC.
The PCM recorder enters the recording
standby mode.
4 Start playback with the connected
external equipment.
5 To start recording, press X PAUSE or
N PLAY/ENTER.
6 When “MANUAL” has been selected in
step 2, adjust the recording level with the
REC LEVEL dial.
7 To stop recording, press x STOP.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
48
Other Playback Operations
Changing the Playback Method
• Level meter display
You can play back a track while checking
the recorded levels.
Changing the display during
playback
You can change the display during
playback between the file information
display and the level meter display.
• File information display
level meter
Title name
Artist name
File name
Selecting the level meter display
1 Press MENU to enter the menu mode.
Current folder icon
The menu mode window will be
displayed.
A track recorded using the PCM recorder
is displayed as follows.
: Track title name: Date
(yymmdd)_file number (e.g.
090101_01)
2 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTER.
: Artist name (e.g. My Recording)
File Name: Date (yymmdd)_file number
_file extension (e.g.
090101_01.wav)
: Current folder name: 01 (FOLDER
01) to 10 (FOLDER 10)
You can change the folder name, title,
artist name, and/or file name using your
computer.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
49
3 Press > FF/ v or . FR/ V to select
“Level Meter in Playback,” and then
press N PLAY/ENTER.
Listening the playback
sounds with the
headphones or external
speakers
• To listen with the headphones:
Connect stereo headphones (not supplied)
to the i/LINE OUT (headphone/line
output) jack. The built-in speaker will be
automatically disconnected. Adjust the
volume with the VOLUME +/– buttons.
• To listen from an external speaker:
Connect the speaker cord of the carrying
case speaker CKS-M10 (not supplied) to
the i/LINE OUT (headphone/line
output) jack of the PCM recorder. Adjust
the volume with the VOLUME +/–
buttons.
4 Press > FF/ v or . FR/ V to select
“ON,” and then press N PLAY/
ENTER.
Or use a Sony audio connecting cable (not
supplied) to connect the microphone or
line input jack of an external active or
passive speaker (not supplied) with the i/
LINE OUT (headphone/line output) jack
of the PCM recorder.
The Level Meter in Playback function is
set to “OFF” when you purchase the
PCM recorder.
5 Press x STOP to exit the menu mode.
To display file information
Set “Level Meter in Playback” to “OFF in step
3.
PNotes
• Set “Audio Out” in the menu to
“Headphones” to use the i/LINE OUT
(headphone/line output) jack as a
headphone.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
50
• When “Audio Out” in the menu is set to
“LINE OUT,” do not connect headphones;
the playback sound from the headphones
will be very loud.
back rapidly, and normal playback will start
at the point you release the button.
• If the last track is long and you wish to start
playback at a later part of the track, press and
hold > FF/ v to go to the end of the track,
and then press . FR/ V while “TRACK
END” is lit to go back to the desired point.
• For tracks other than the last one, go to the
beginning of the next track and play
backward to the desired point.
Quickly locating the point
you wish to start playback –
Easy Search
When “Easy Search” is set to “ON” in the
menu, you can quickly locate the point at
which you wish to start playback by
pressing > FF/ v or . FR/ V
Selecting the playback
mode
can go back approx. 3 seconds by pressing
. FR/ V once, or advance approx. 10
seconds by pressing > FF/ v once. This
function is useful for locating a desired
point in a long recording, such as in a
recording of musical instruments.
> FF/ v,
. FR/ V
MENU
z When tracks are played back to
the end of the last track
N PLAY/
ENTER
• When you play back or fast play back to the
end of the last track, “TRACK END” lights
up for approx. 5 seconds.
x STOP
• When “TRACK END” goes off, the PCM
recorder will stop at the beginning of the last
track.
• If you press and hold . FR/ V while
“TRACK END” is lit, the tracks are played
You can select the playback mode in the
menu.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
51
1 Press MENU to enter the menu mode
when the PCM recorder is in the stop or
playback mode.
ALL
All the tracks are played back
continuously.
1
One track is played back repeatedly.
The menu mode window will be
displayed.
Tracks in one folder are played back
repeatedly.
2 Press > FF/ v or . FR/ V to select
“Play Mode,” and then press N PLAY/
ENTER.
ALL All the tracks are played back
repeatedly.
4 Press x STOP to exit the menu mode.
Playing back repeatedly
3 Press > FF/ v or . FR/ V to select
“1,” “ ,” “ALL,” “
1,” “
,” or
“
ALL,” and then press N PLAY/
ENTER.
A-B
N PLAY/
ENTER
1
A track is played back.
Tracks in one folder are played back
continuously.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
52
• To change the segment specified for A-B
Repeat playback:
During A-B Repeat playback, press
(repeat) A-B again to specify a new
starting point A. Then specify a new
finishing point B, as in step 2.
Playing back a track repeatedly
During playback, press and hold N PLAY/
ENTER until “ 1” appears. The selected
track will be played back repeatedly.
To resume normal playback, press N
PLAY/ENTER again.
Playing back a specified section
repeatedly – A-B Repeat
1 During playback, press
(repeat) A-B
to specify the starting point A.
“A-B B?” is displayed.
2 Press
the finishing point B.
A-B” is displayed and the specified
(repeat) A-B again to specify
“
section is played back repeatedly.
Other operations
• To resume normal playback:
Press N PLAY/ENTER.
• To stop A-B Repeat playback:
Press x STOP.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
53
Changing the Playback Sounds
1 Slide the DPC (SPEED CTRL) switch to
Adjusting the playback
speed – the DPC function
“ON.”
2 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
3 Press > FF/ v or . FR/ V to select
“DPC(Speed Control),” and then press
N PLAY/ENTER.
> FF/ v,
. FR/ V
MENU
N PLAY/
ENTER
x STOP
4 Press > FF/ v or . FR/ V to adjust
the playback speed.
Press > FF/ v to increase the speed, or
. FR/ V to make it slower. Every time
the button is pressed, you can decrease
the speed by 5% for – from –75% to 0%,
and increase the speed by 10% for +
between 0% and 100%.
When you slide the DPC (SPEED CTRL)
(Digital Pitch Speed Control) switch to
“ON,” you can adjust the playback speed
between +100% and –75% of normal speed
in the menu.
The track is played back in natural tones
thanks to the digital processing function.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
54
Adjusting the playback
tones – Key Control
> FF/ v,
. FR/ V
5 Press N PLAY/ENTER to execute the
playback speed.
MENU
6 Press x STOP to exit the menu mode.
7 Press N PLAY/ENTER to start
N PLAY/
ENTER
playback.
Tracks are played back at the selected
playback speed.
x STOP
To resume normal playback
Slide the DPC (SPEED CTRL) switch to
“OFF.”
You can adjust the playback sounds in
semitones higher or lower, each in 6 step
(Key Control), whichever is best suited for
practicing songs to the recorded
accompaniment.
1 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
2 Press > FF/ v or . FR/ V to select
“Key Control,” and then press N
PLAY/ENTER.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
55
Key control
setting
3 Press > FF/ v or . FR/ V to adjust
the playback tone.
To resume normal playback
sounds
Press > FF/ v to adjust the sounds by
a halftone higher (#1 to #6), or . FR/
V to adjust it by a halftone lower (21 to
26), each in 6 steps.
Select “0” in step 3.
Reinforcing the bass
sound – Effect
> FF/ v,
. FR/ V
4 Press N PLAY/ENTER to set the
playback tone.
MENU
5 Press x STOP to exit the menu mode.
6 Press N PLAY/ENTER to start
N PLAY/
ENTER
playback.
Tracks are played back at the selected
tone. The setting ( #1 to #6, 21 to 26) is
displayed on the display window.
x STOP
You can set the bass sound you want for the
playback in the menu.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
56
1 Press MENU to enter the menu mode
when the PCM recorder is in the stop or
playback mode.
4 Press x STOP to exit the menu mode.
5 Press N PLAY/ENTER to start
playback.
The menu mode window will be
displayed.
Tracks are played back with the selected
effect.
2 Press > FF/ v or . FR/ V to select
“Effect,” and then press N PLAY/
ENTER.
PNotes
• When you play back using the built-in
speaker, this setting does not work.
• When “LINE OUT” is selected in “Audio
Out” in the menu, the Effect function does
not work.
3 Press > FF/ v or . FR/ V to select
effect you want for the playback, and
then press N PLAY/ENTER.
Bass1 Emphasizes the bass sound.
Bass2 Emphasizes the bass sound even more.
OFF The Effect function does not work.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
57
Playback via Other Devices
the audio input connector (stereo
minijack) of other equipment using an
audio connecting cable.
Recording with other
equipment
Tape recorder, etc.
2 Press MENU to enter the menu mode in
the stop mode.
The menu mode window will be
displayed.
i/LINE OUT
jack
3 Press > FF/ v or . FR/ V to select
“Detail Menu,” and then press N
PLAY/ENTER.
Audio
connecting
cable
x STOP
N PLAY/ENTER
4 Press > FF/ v or . FR/ V to select
“Audio Out,” and then press N PLAY/
ENTER.
You can record the sound of the PCM
recorder with other equipment.
Before you start recording, we recommend
you to make a trial recording first.
1 Connect the i/LINE OUT (headphone/
line output) jack of the PCM recorder to
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
58
5 Press > FF/ v or . FR/ V to select
“LINE OUT,” and then press N PLAY/
ENTER.
PNotes
• To listen playback with the headphones, set
• If input from an external equipment is
distorted, select “Headphones” in step 5 and
adjust the volume with VOLUME +/–
buttons.
• When “LINE OUT” is selected, the Effect
function does not work.
• While the “LINE OUT” is selected, you
cannot adjust the output volume with the
VOLUME +/– buttons.
“Headphones” is selected when you
purchase the PCM recorder.
6 Press x STOP to exit the menu mode.
7 Press N PLAY/ENTER to start
playback and at the same time set the
connected equipment to the recording
mode.
A track from the PCM recorder will be
recorded on the equipment connected.
8 Press x STOP on the PCM recorder and
the connected equipment at the same
time to stop recording.
z Recommended audio connecting
cable (not supplied)
You can use Sony audio connecting cables
RK-G129 (not supplied).
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
59
Editing Tracks
Adding a Mark to a Track
The
(track mark) icon flashes three
Using a track mark
times, and a track mark is added.
> FF/ v,
. FR/ V
MENU
z Using the remote commander
N PLAY/ENTER
T-MARK
When the supplied remote commander is
connected, you can also press T-MARK button
on the remote commander to add a track mark.
PNotes
• You can add a track mark only to a track
recorded using the PCM recorder. You
cannot add a track mark to an MP3/WMA/
AAC-LC (m4a)/LPCM (WAV) file copied
from a computer.
• You cannot add a track mark at a point
within 0.5 seconds from another track mark.
• You cannot add a track mark at the very
beginning or at the very end of the track.
x STOP
Adding a track mark
You can add a track mark at a point at
which you would like to divide a track later
or locate during playback.
You can add a maximum of 98 track marks
to each track.
• If there are already 98 track marks in a track,
you cannot add any more track marks.
During recording, playback, or pausing,
press the T-MARK button at the position
you want to add a track mark.
• When a track mark is added during
playback, the playback stops.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
60
4 Press > FF/ v or . FR/ V to select
“Delete T-MARK(Track Mark),” and
then press N PLAY/ENTER.
Locating a track mark and
starting playback at the track
mark
In the stop mode, press > FF/ v or .
The message “Delete T-MARK(Track
Mark)?” is displayed.
FR/ V. When the
(track mark) icon
flashes once, press N PLAY/ENTER
Dividing a track at all the track
mark positions
Select “Divide All T-MARK(Track
Marks)” from the Divide menu.
Deleting a track mark
5 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
1 Stop at a position after the track mark
you would like to delete.
A deletion animation and the message
“Deleting...” appear. The selected track
mark will be deleted.
2 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
3 Press > FF/ v or . FR/ V to select
“Delete,” and then press N PLAY/
ENTER.
The Delete menu is displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
61
Adding a “TAKE” or “KEEP”
to a file name
Stop position
Delete T-Mark
The track mark just before the stop
position will be deleted.
> FF/ v,
. FR/ V
6 Press x STOP to exit the menu mode.
MENU
Deleting all the track marks in
the selected track at one time
Select a track from which you would like to
delete the track marks, and then select
“Delete All T-MARK(Track Marks)” in
step 4. All the track marks will be deleted at
one time.
N PLAY/
ENTER
x STOP
You can add a “TAKE” or “KEEP” to a file
name of a track, so that you can narrow
down your selections to only marked files.
This feature is useful when you want to
select one from many recordings, by adding
a “TAKE” to the ones most likely to be
selected, or adding a “KEEP” to the ones
that you would like to save just for possible
selection.
1 Display the track from which you would
like to add a “TAKE” or “KEEP” to the
file name.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
62
2 Press MENU to enter the menu mode.
A suffix (“TAKE” or “KEEP”) is added
to the file name of the track.
The menu mode window will be
displayed.
3 Press > FF/ v or . FR/ V to select
“Add “TAKE”,” and then press N
PLAY/ENTER.
6 Press x STOP to exit the menu mode.
Removing “TAKE” or “KEEP” from
the file name of a track
Select “Remove “TAKE/KEEP”” in step 4.
4 Press > FF/ v or . FR/ V to select
“Add “TAKE”,” or “Add “KEEP”,” and
then press N PLAY/ENTER.
A confirmation message is displayed.
5 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
63
3 Press > FF/ v or . FR/ V to select
“Protect,” and then press N PLAY/
ENTER.
Protecting a track
A confirmation message is displayed.
> FF/ v,
. FR/ V
MENU
4 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
N PLAY/
ENTER
The track is protected and added with a
(protect) indicator.
x STOP
To prevent a track from being accidentally
deleted or edited, you can protect an
important track. A protected track is
marked with the
(protect) indicator and
is regarded as a read-only file you cannot
delete or edit.
5 Press x STOP to exit the menu mode.
To release protection
Select the protected file, and then proceed
with the steps 1 through 5. The protection is
released.
1 Display the track which you would like
to protect.
2 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
64
Arranging Tracks
PNotes
• You cannot copy a track that the PCM
recorder does not recognize.
Copying a track to the other
memory
• Before starting to copy the target track, make
sure to check the battery remain indication.
If the batteries are weak, you may not be
• If the remaining memory capacity of the
destination memory is insufficient, you may
not be able to copy tracks.
> FF/ v, .
FR/ V
MENU
1 Select the track you want to copy.
When you want to copy a track from a
memory card to the built-in memory, set
the “Memory” in the menu to “Memory
Card” (page 38).
N PLAY/ENTER
x STOP
2 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
Memory card slot
You can copy tracks between the built-in
memory and a memory card, which is
useful in saving a backup. Before starting
the operation, insert a memory card to be
used for copying into the memory card slot.
3 Press > FF/ v or . FR/ V to select
“File Copy,” and then press N PLAY/
ENTER.
The message “Copy to Memory Card
Select Folder” or “Copy to Built-In
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
65
Memory Select Folder” is displayed and
the folder selection window is displayed.
PNote
Do not remove or insert a memory card, or
turn off the PCM recorder while copying. Files
may be damaged.
Dividing a track into two
4 Press > FF/ v or . FR/ V to select
the folder that you want to copy the track
into, and then press N PLAY/ENTER.
> FF/ v,
“Copying...” is displayed and the track is
copied to the end in the destination
folder.
. FR/ V
MENU
A file will be copied with the identical
file name. The artist name and other
settings will also be retained.
N PLAY/
ENTER
x STOP
You can divide a track during playback, so
that the track is divided into two parts, and
the respective tracks are suffixed with “_1”
and “_2.” You can also divide a track at
each and every track mark.
5 Press x STOP to exit the menu mode.
To cancel the copy operation
Press x STOP before step 4.
By dividing a track, you can easily find the
point from which you want to start
playback when you make a long recording.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
66
You can divide a track until the total
number of tracks in the folder reaches 99.
A period for approximately 4 seconds
from the dividing point will be played
back repeatedly.
Dividing a track at the current
position
1 Stop the track at the position where you
want to divide a track.
2 Press MENU to enter the menu mode.
5 Adjust the position to be divided, if you
The menu mode window will be
displayed.
wish.
Press > FF/ v to move the position
backward, or . FR/ V to move it
forward.
3 Press > FF/ v or . FR/ V to select
“Divide,” and then press N PLAY/
ENTER.
The Divide menu is displayed.
You can adjust the position to be divided
by approximately 0.3 seconds in a period
approximately 6 seconds each, both
before and after the current position.
4 Press > FF/ v or . FR/ V to select
“Divide Current Position,” and then
press N PLAY/ENTER.
6 Press N PLAY/ENTER to execute the
position to be divided.
“Divide?” is displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
67
• You can divide a track recorded using the
PCM recorder only. An MP3/WMA/
AAC-LC (m4a)/LPCM (WAV) file copied
from a computer cannot be divided.
• Once a track is divided, you cannot return it
to the original status again.
• If you divide a track at the position within
0.5 seconds from a track mark, the track
mark will be deleted.
7 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
“Dividing...” appears, and the divided
tracks will be suffixed with a sequential
number (“_1” for the original track, and
“_2” for the new track).”
• Because of the system limitations, you
cannot divide a track at the very beginning or
end of the track.
Dividing a track at all the track
mark positions
display the Divide menu.
track 1
track 1
track 2
track 3
track 3
v
f
A track is divided.
track 2_1
track 2_2
2 Press > FF/ v or . FR/ V to select
“Divide All T-MARK(Track Marks),”
and then press N PLAY/ENTER.
A suffix made up of a sequential number is
added to each of the divided files.
“Divide All T-MARK(Track Marks)?” is
displayed.
8 Press x STOP to exit the menu mode.
PNotes
• You need a certain amount of free space in
the memory to divide a track. For details, see
• When you divide a track with a title and
artist name, the new track has the same title,
and artist name.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
68
3 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
z Tip
To cancel division during the operation at all
the remaining track marks, press x STOP.
The tracks that have been divided before the
cancellation remain divided.
“Dividing...” appears, and the track is
divided at all the track mark positions.
The tracks divided from a single track
will be suffixed with a sequential number
(_1 and so on).
Deleting all tracks in a folder
MENU
Track1
A track is divided.
N PLAY/
ENTER
Track1_1 Track1_2
Track1_3
A suffix made up of a sequential number is
added each of the divided files.
x STOP
> FF/ v,
. FR/ V
4 Press x STOP to exit the menu mode.
PNote
To play a divided track
If the selected folder contains a protected
track, you cannot delete the track.
Press > FF/ v or . FR/ V to display
the track number, as the divided tracks now
each have different track numbers.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
69
1 Select the folder containing the tracks
you want to delete when the PCM
recorder is in the stop mode.
5 Press > FF/ v or . FR/ V to select
“Execute,” and then press N PLAY/
ENTER.
“Deleting...” appears in the display
window and all tracks in the selected
folder will be deleted.
2 Press MENU to enter the menu mode.
The menu mode window will be
displayed.
3 Press > FF/ v or . FR/ V to select
“Delete,” and then press N PLAY/
ENTER.
The Delete menu is displayed.
6 Press x STOP to exit the menu mode.
To cancel deleting
Select “Cancel” in step 5, and then press
N PLAY/ENTER.
4 Press > FF/ v or . FR/ V to select
“Delete All,” and then press N PLAY/
ENTER.
A confirmation message is displayed.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
70
About the Menu Function
Making Settings for the Menu
> FF/ v,
. FR/ V
3 Press > FF/ v or . FR/ V to select
MENU
the setting that you want to set, and then
press N PLAY/ENTER.
N PLAY/
ENTER
x STOP
1 Press MENU to enter the menu mode.
4 Press x STOP or MENU to exit the
The menu mode window will be
displayed.
menu mode.
PNote
If you do not press any button for 1 minute, the
menu mode is automatically cancelled and the
window will return to the normal display.
To return to the previous window
Press MENU during the menu mode.
2 Press > FF/ v or . FR/ V to select
the menu item for which you want to
make setting, and then press N PLAY/
ENTER.
To exit the menu mode
Press x STOP.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
71
Menu settings
Menu items
Settings
Operation mode
: the setting can be made/
— : the setting cannot be made)
(a
Stop
Playback Recording
mode
mode
mode
a
a
a
—
—
Divide
—
—
Divide Current Position
Execute, Cancel
—
—
DivideAllT-MARK(Track Execute, Cancel
Marks)
a
a
a
—
—
—
—
—
—
Delete
Delete All
Execute, Cancel
Execute, Cancel
Delete T-MARK(Track
Mark)
a
—
—
Delete All T-MARK(Track Execute, Cancel
Marks)
a
a
—
—
—
—
File Copy
Execute, Cancel
Add “TAKE”
Add “TAKE”, Add “KEEP”, Remove
“TAKE/KEEP”
a
a
a
—
—
—
—
—
—
Protect
Execute, Cancel
Memory
REC Mode
Built-In Memory, Memory Card
LPCM 22.05kHz/16bit, LPCM 44.10kHz/
16bit, LPCM 44.10kHz/24bit, LPCM
48.00kHz/16bit, LPCM 48.00kHz/24bit,
LPCM 96.00kHz/16bit, LPCM 96.00kHz/
24bit, MP3 44.10kHz/64kbps, MP3
44.10kHz/128kbps, MP3 44.10kHz/320kbps
a
a
—
a
LCF(Low Cut Filter)
DPC(Speed Control)
ON, OFF
a
—
–75 % to +100%
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
72
Menu items
Settings
Operation mode
: the setting can be made/
— : the setting cannot be made)
(a
Stop
Playback Recording
mode
mode
mode
a
a
a
a
a
a
a
a
a
a
a
—
Effect
Bass1, Bass2, OFF
a
—
Key Control
Easy Search
Play Mode
Detail Menu
Format
2
1 to
ON, OFF
1, , ALL,
2
6,
#
1 to
#6
a
—
a
—
1,
,
ALL
a
a
—
—
—
—
—
—
Execute, Cancel
—
Clock
_ _ y _ _ m _ _ d _ _ : _ _
ON, OFF
—
LED
—
Backlight
Language
10 SEC, 60 SEC, Always-ON, OFF
—
Deutsch (German), English,
Español (Spanish), Français (French),
Italiano (Italian), Русский (Russian),
(Japanese),
(Chinese),
(Korean),
(Chinese),
(Thai)
a
a
a
a
a
a
a
a
—
—
—
—
—
—
—
—
a
—
—
—
—
Level Meter in Playback
ON, OFF
Battery Setting
LIMITER
Alkaline Battery, NiMH Battery
ON, OFF
PRE REC
ON, OFF
Audio Out
Headphones, LINE OUT
ON, OFF
Plug In Power
Cross-Memory Recording ON, OFF
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
73
Menu items
Divide
Settings (*: Initial setting)
See page
Divide a track into two.
Divide Current A track will be divided into two at the current position.
Position
Divide All T-
MARK(Track
Marks)
A track will be divided at all the track mark positions.
Delete
Delete tracks or track marks.
Delete All
All tracks in the selected folder will be deleted.
Press
to return to the folder window before deleting the
tracks and select a folder from which all tracks are to be deleted,
and then go to the menu window and select “Execute.”
Delete T-
MARK(Track
Mark)
The track mark just before the current position will be deleted.
Delete All T-
MARK(Track
Marks)
All the track marks of the selected track will be deleted.
File Copy
Copy the selected track from the built-in memory to the desired
folder on a memory card, or from a memory card to the desired
folder in the built-in memory.
Before attempting to copy a track, select the track to be copied
and then go to the menu window.
Add “TAKE”
Add “TAKE” or “KEEP” to the file name of the selected track.
Add “TAKE”*:
Add “TAKE” to the file name of the selected track.
Add “KEEP”:
Add “KEEP” to the file name of the selected track.
Remove “TAKE/KEEP”:
Remove “TAKE” or “KEEP” from the file name of the
selected track.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
74
Menu items
Protect
Settings (*: Initial setting)
See page
Protect the selected track to prevent the track from being deleted
or divided.
Execute:
Protect the selected track. If you specify a track which has
already been protected, cancel the protection.
Cancel*:
Protection or cancel protection is not executed.
Memory
Select the memory in which you want to save a track, or which
contains the track you want to play, edit, or copy.
Built-In Memory*:
The built-in memory of the PCM recorder is selected.
Memory Card:
The memory card inserted in the memory card slot is selected.
PNote
When no memory card is currently inserted in the PCM recorder,
the built-in memory is automatically selected.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
75
Menu items
REC Mode
Settings (*: Initial setting)
See page
Set the sampling frequency and quantifying bit number for
recording:
LPCM (not compressed) mode
LPCM 22.05kHz/16bit
LPCM 44.10kHz/16bit*
LPCM 44.10kHz/24bit
LPCM 48.00kHz/16bit
LPCM 48.00kHz/24bit
LPCM 96.00kHz/16bit
LPCM 96.00kHz/24bit
You can record with higher sound
quality.
MP3 (compressed) mode
MP3 44.10kHz/64kbps
(for a long-time recording)
MP3 44.10kHz/128kbps
MP3 44.10kHz/320kbps
You can record with higher
sound quality.
z About the sampling frequency and quantifying
bit number
• Sampling frequency is a value that represents how many times
an analog signal is converted into a digital signal (A/D
conversion) per second. The larger the value of sampling
frequency, the better the sound quality, but also the larger the
amount of data.
• Quantifying bit number is a value that represents the amount of
data it takes for one second of audio. The larger the value of the
bit number, the larger amount of data it takes and the better the
sound quality.
LCF(Low Cut Filter) Set the LCF(Low Cut Filter) function to cut a low frequency to
reduce the roaring noise from wind or noises such as those of air
conditioner fans; therefore you can record a track more clearly.
ON:
The LCF function is activated.
OFF*:
The LCF function is cancelled.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
76
Menu items
Settings (*: Initial setting)
See page
DPC(Speed Control) Set the DPC(Speed Control) function.
You can adjust the playback speed between +100% and –75% of
normal speed in the menu.You can set the speed by 5% for – from
–75% to 0%, 10% for + between 0% and 100%.
(–30%*)
Effect
Set the effect you want for the playback in the menu.
Bass1:
The bass sound is emphasized.
Bass2:
The bass sound is emphasized even more.
OFF*:
The Effect function does not work.
PNotes
• When playing back tracks using a built-in speaker, the Effect
function does not work.
• When “LINE OUT” is selected, the Effect function does not
work.
Key Control
Easy Search
Adjust the playback sounds in semitones higher or lower.
You can adjust from #1 to #6, and 21 to 26. (0*)
Set the easy search function.
ON:
You can go forward for about 10 seconds by pressing > FF/
v and go back for about 3 seconds by pressing . FR/ V.
This function is useful when attempting to locate desired point
in a long recording.
OFF*:
The easy search function does not work. When you press .
FR/ V or > FF/ v, a track will be moved forward or
backward.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
77
Menu items
Play Mode
Settings (*: Initial setting)
See page
Set the playback mode.
1:
A track is played back.
*:
Tracks in one folder are played back continuously.
ALL:
All the tracks are played back continuously.
1:
One track is played back repeatedly.
:
Tracks in one folder are played back repeatedly.
ALL:
All the tracks are played back repeatedly.
Detail Menu
Format
Format the memory currently selected in “Memory” setting in the
menu, deleting all the data in the memory and resetting the folder
structure to its default status.
–
Execute:
“Formatting...” appears and the memory will be formatted.
Cancel*:
The memory will not be formatted.
PNotes
• Do not use your computer to format a memory card you use
with the PCM recorder. Format it with the formatting function
of the PCM recorder.
• Once the memory has been deleted, you cannot retrieve the data
that was deleted.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
78
Menu items
Clock
Settings (*: Initial setting)
See page
Set the clock by setting year, month, day, hour, and minute in
sequence.
(09y01m01d 0:00*)
z Tip
The clock is displayed in 24-hour system.
0:00 = midnight, 12:00 = noon
LED
Turn the operation of ACCESS indicator, peak level indicators,
z REC button, N PLAY/ENTER button, and X PAUSE button
–
on or off during operation.
ON*:
During recording or playback, the indicators light or flash.
OFF:
The operation indicator does not light or flash, even during
operation.
PNote
When the PCM recorder is connected to a computer, the
operation indicators light or flash even if “LED” is set to “OFF.”
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Menu items
Backlight
Settings (*: Initial setting)
See page
Turn the backlight in the display window on or off.
10 SEC*:
–
The backlight in the display window lights up for approx. 10
seconds.
60 SEC: The backlight in the display window lights up for
approx. 60 seconds.
Always-ON:
The backlight in the display window lights up always.
OFF:
The backlight in the display window does not light, even
during operation.
PNote
When you select “Always-ON,” the batteries will be consumed
quickly. When you use the PCM recorder with batteries, we
recommend you select other options than “Always-ON.”
Language
Set the language to be used for messages, menus, folder names,
file names, etc.: Deutsch (German), English*, Español (Spanish),
Français (French), Italiano (Italian), Русский (Russian),
(Japanese),
(Chinese),
(Korean),
(Thai)
(Chinese),
Level Meter in Set whether the level meter is displayed on the display window
Playback
when a track is being played back.
ON: The level meter will be displayed.
OFF*: The artist name and title name of the track will be displayed.
Battery Setting Set the battery type for the PCM recorder.
Alkaline Battery*:
Select this option to use alkaline batteries for the PCM
recorder.
NiMH Battery:
Select this option to use rechargeable batteries (not supplied)
for the PCM recorder.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
80
Menu items
LIMITER
Settings (*: Initial setting)
See page
Set the input level automatically to prevent the sound distortion
that may occur when a too loud sound is input in Manual
recording.
ON:
The LIMITER function is activated.
OFF*:
The LIMITER function is cancelled.
PNote
This feature is effective only when REC LEVEL switch is set to
“MANUAL.”
z On the limiter circuit
• The limiter circuit functions to keep the signal level below the
maximum input level. When a loud sound is input suddenly, the
excess part of the sound is automatically set within the range of
the maximum input level in order to prevent distortion.
• The limiter circuit of the PCM recorder does not compensate
for clipping when audio over 12 dB is input. In this case, sound
may be distorted.
PRE REC
Set the pre-recording function on and off. The pre-recording
function allows you to record sound sources for approximately 5
seconds prior to the point when the recording is started. Sounds
for approximately 5 seconds are buffered in the memory.
ON:
The pre-recording function is activated.
OFF*:
The pre-recording function is cancelled.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
81
Menu items
Audio Out
Settings (*: Initial setting)
See page
Set the output of the i/LINE OUT (headphone/line output) jack.
Headphones*: You can use the jack as a headphone jack. Select
this option to listen playback sound with the headphones (not
supplied) or an external speaker.
LINE OUT: You can use the jack as a line output jack. Select this
option to connect an external recorder such as a tape recorder
for recording playback sound of the PCM recorder.
PNotes
• If “LINE OUT” is selected, do not connect headphones; the
playback sound from the headphones will be very loud.
• If “LINE OUT” is selected, you cannot adjust output volume
with the VOLUME +/– buttons and cannot use the Effect
function.
Plug In Power Set the Plug In Power function on and off. When a microphone
compatible with the Plug In Power function is connected to the
m (microphone) jack of the PCM recorder, the PCM recorder
can supply power to the microphone.
–
ON*: The PCM recorder supplies power to the connected Plug In
Power type microphone.
OFF: The PCM recorder does not supply power to a connected
microphone.
Cross-Memory Set the Cross-Memory Recording function on and off. When the
Recording
memory currently selected in the “Memory” setting in the menu
becomes full during recording, the PCM recorder automatically
switches its destination to the other memory media and continues
recording (Cross-Memory Recording). The new recording is
saved as another track.
ON: The Cross-Memory Recording function is activated.
OFF*: The Cross-Memory Recording function is disabled.
Recording stops when the memory currently being selected
becomes full.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
82
Utilizing Your Computer
Using the PCM recorder with Your Computer
When the PCM recorder is connected to
your computer, it is recognized by the
computer, and you can transfer data
between them.
z System requirements for your
computer
®
z When you are using Windows
2000 Professional
Copying tracks from the PCM
recorder to your computer to
save them (page 87)
Install the driver using
“SonyRecorder_Driver.exe” in the PCM
recorder.
You can copy the tracks recorded on the
PCM recorder to save them.
Copying music files from your
computer to the PCM recorder to
play them back (page 88)
You can copy WAV/MP3/WMA/AAC-LC
(m4a) files saved on your computer by a
simple drag and drop operation when you
connect the PCM recorder to your
computer. You can also play back the
copied files.
Using the PCM recorder as a
USB memory – data storage
function (page 90)
You can store image data or text data saved
on the computer temporarily in the PCM
recorder.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
83
connectors securely until each plug stops
to the end.
Connecting the PCM
recorder to your computer
2 Make sure the PCM recorder has been
Computer
recognized properly.
On the Windows screen; open “My
Computer” and make sure that “PCM
RECORDER” has been recognized.
To USB port
On the Macintosh screen; make sure that
an “PCM RECORDER” drive is
displayed on the desktop.
While the PCM recorder is connected to the
computer, “Connecting” is displayed in the
display window of the PCM recorder.
PNotes
• If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
USB connecting
cable (supplied)
• Use of this PCM recorder with a USB hub or
a USB extension cable other than the
supplied cable is not guaranteed.
PCM recorder
• A malfunction may occur depending on the
USB devices connected at the same time.
• Before connecting the PCM recorder to the
computer, make sure that the batteries are
inserted in the PCM recorder.
• It is recommended that you disconnect the
PCM recorder from the computer when you
are not using the PCM recorder connected to
the computer.
To exchange tracks (files) between the
PCM recorder and your computer, connect
the PCM recorder to your computer.
1 Connect the
USB connector of the
PCM recorder with the USB port of your
running computer with the supplied
USB connecting cable inserted into the
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
84
Structure of folders and
files
microSD card
Built-In Memory and M2™
“MEMORY CARD”*4
“PCM RECORDER” or “MEMORY CARD”*4
Folder for tracks
recorded using the
PCM recorder
Folder for tracks
recorded using the
PCM recorder
Folder copied
1
from your
computer
*
Lesson
MUSIC
Folder copied from
your computer
1
*
Lesson
MUSIC
POP
POP
1
J-POP
*
1
J-POP
*
2
*
2
*
3
*
3
*
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
85
put an easy-to-remember name on the
folder in advance.
Folders shown in the illustration are
examples of folder names.
The PCM recorder can recognize up to 8
levels of folders copied to the PCM
recorder.
* If you copy music files separately, they are
classified as being in “No Folder.”
* The volume label of the built-in memory is
If you connect the PCM recorder to your
computer, you can see the structure of
folders and files of the built-in memory,
memory card (M2™ or microSD card) on
the computer screen.
*2
The folders and files are displayed on the
computer screen as shown on the previous
page.
3
4
The folder indicators in the display window
of the PCM recorder are as follows:
“PCM RECORDER.” That of M2™ and
microSD cards is “MEMORY CARD.”
z Tips
:
Folder for tracks recorded using the
PCM recorder (They have been
already made when you purchase
the PCM recorder.)
• You can rename a folder name, title, artist
name, and file name with your computer.
• The title or artist name, etc., registered in the
music files can be displayed on the PCM
recorder. It is useful if you input the ID3 tag
information using the software you use to
make the music files on your computer.
:
Folder copied from a computer
(They are displayed when music
files have been copied from a
computer.)
PNotes
• You cannot copy more than 511 folders or
files to the directory that is located
immediately below “MEMORY CARD” on
your computer. This is due to FAT file
system limitations.
• If no title, or artist name has been registered
in the ID3 tag information, “Unknown” will
be displayed.
PNote
You can record tracks in up to 10 folders
(FOLDER01-10), each for the built-in
memory and memory card, using the PCM
recorder.
1
* The name of a folder in which music files
are stored will be displayed on the PCM
recorder as it is, so it is convenient if you
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
86
Copying Tracks from the PCM recorder to
Your Computer
z To copy a track or folder
(Drag and drop)
You can save tracks or folders by copying
them from the PCM recorder to your
computer.
1 Click and hold,
2 drag,
3 and then drop.
When you wish to create a CD, you can use
“Sound Forge Audio Studio LE,” the
supplied software application, to create a
CD. For the details, see the “Sound Forge
Audio Studio LE Guide.”
3 Disconnect the PCM recorder from your
PNote
1 Connect the PCM recorder to your
If you remove a USB connecting cable while
the PCM recorder is transferring data to your
computer, data may be damaged. For how to
2 Copy tracks or folders you want to copy
to your computer.
Drag and drop the tracks or folders you
want to copy from “PCM RECORDER”
or “MEMORY CARD” to the local disc
on your computer.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
87
Copying Files from Your Computer to the
PCM recorder and Playing Them Back
2 Copy the folder in which the music files
are stored to the PCM recorder.
On the Windows screen using Explorer,
and on the Macintosh screen using
Finder, drag and drop the folder
containing the music files onto “PCM
RECORDER” or “MEMORY CARD.”
The PCM recorder can recognize up to
You can copy music or the other audio files
500 folders. You can copy up to 99 files
(LPCM/MP3/WMA/AAC-LC*) from your
computer to the PCM recorder by dragging
total.
and dropping them, and you can play them
to one folder and up to 5,000 files in
back using the PCM recorder.
3 Disconnect the PCM recorder from your
computer.
You can make an LPCM/MP3/WMA/
4 Press
.
AAC-LC file using either a player software
application, etc., installed on your
computer.
5 Press > FF/ v or . FR/ V to select
the folder ( ) in which music files are
stored, and then press N PLAY/
ENTER.
* For the file formats that can be played back
using the PCM recorder, see
6 Press > FF/ v or . FR/ V to select
1 Connect the PCM recorder to your
the music file you want to play.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
88
• The fs/bit (sampling frequency and
quantifying bit number) information will not
be displayed for a WAV file copied from
your computer.
• The bit rate information will not be
displayed for a MP3/WMA/AAC-LC (m4a)
file copied from your computer.
7 Press N PLAY/ENTER to start
playback.
8 Press x STOP to stop playback.
The maximum playback time (tracks*),
when playing music files using the PCM
recorder, is as follows.
z Tip
You can use your computer to change a folder
name, track name, artist name, and file name
of a track.
48 kbps
128 kbps
256 kbps
178hr.
55 min.
67 hr.
33 hr.
30 min.
z To enjoy music files more
• Selecting the playback mode
(2,683 tracks)
(1,005 tracks)
(502 tracks)
You can select the playback mode, such as
playback of one music file, continuous
playback of music files in one folder,
continuous playback of all music files,
repeat playback of one music file, repeat
playback of music files in one folder and
repeat playback of all music files, in the
• Adjusting the playback speed (DPC(Speed
Control))
You can adjust a playback speed between
+100% and –75% of normal speed
* In the case where tracks of 4 minutes each
are copied to the PCM recorder.
PNotes
• A music file copied from your computer can
be played back with the PCM recorder.
Dividing a track and setting a track mark,
however, may not be performed.
• If you have copied music files using your
computer, those files may not be copied in
order of copying because of the system
limitations. If you copy a music file one by
one to the PCM recorder, you can display
and play back tracks in order of copying.
• Selecting a sound effect and tone (Key
Control, Effect)
• When removing the PCM recorder, see
You can reinforce bass sound by selecting a
sound effect from “Bass1” or “Bass2” for
You can also adjust the playback tones in the
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
89
Using the PCM Recorder as a USB Memory –
Data Storage Function
When the PCM recorder is connected to
your computer using a USB connecting
cable, image data or text data on the
computer, as well as tracks or files recorded
using the PCM recorder can be temporarily
stored in the PCM recorder.
Your computer must meet the operating
system requirements and port environment
to use the PCM recorder as a USB memory.
For details on the system requirements, see
PNote
When you format the memory with the PCM
recorder, all the data temporarily stored in the
PCM recorder will be deleted. You cannot
restore the data.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
90
Disconnecting the PCM Recorder from Your
Computer
Follow the procedures below; otherwise,
data may be damaged.
3 Disconnect the PCM recorder from the
USB port of the computer.
1 Make sure that the PCM recorder is in
the stop mode.
2 Perform the following operation on your
computer.
On the Windows screen, left-click the
icon at the bottom of the desktop of the
computer.
t Left-click “Safely remove USB
Mass Storage Device.”
The icon can be different on different
operating systems.
On the Macintosh screen, drag the “PCM
recorder” on the desktop to “Trash” and
drop it there.
For details on disconnecting the PCM
recorder from your computer, refer to the
operating instructions supplied with your
computer.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
91
Additional Information
Precautions
On noise
On handling
• Do not subject the PCM recorder to strong
shock or vibration. Doing so may cause a
malfunction of the PCM recorder.
• Do not place the recorder in the following
locations:
– Anywhere extremely hot. Never expose it
to temperatures above 60ºC.
– Under direct sunlight or close to heaters
– In a sun-heated car with the windows
closed (especially in summer)
– In a humid place, such as in a bathroom
– Anywhere dusty
• Be careful not to allow water to splash on the
unit. The unit is not water-proof. In
particular, be careful in the following
situations.
• Noise may be heard when the unit is placed
near an AC power source, a fluorescent lamp
or a mobile phone during recording or
playback.
• Operation and touch noises may be recorded
when you press the button on the PCM
recorder, touch the case, or hold the PCM
recorder during recording. By using the
supplied remote commander, you can
perform recording operations without
touching the PCM recorder.
• Roaring noise from wind, or other noises
from electric fans, air conditioners, air
cleaners, or PC fans will also be recorded.
You can reduce the low frequencies noise by
setting the LCF(Low Cut Filter) function
noise from wind by using the wind screen
(supplied for PCM-M10P only).
– When you have the unit in your pocket and
go to the bathroom, etc.
– When you bend down, the unit may drop
into the water and may get wet.
– When you use the unit in an environments
where the unit is exposed to rain, snow, or
humidity.
– In circumstances where you get sweaty.
If you touch the unit with wet hands or if
you put the unit in the pocket of sweaty
clothes, the unit may get wet.
On safety
Do not operate the unit while driving, cycling
or operating any motorized vehicle.
On the built-in microphones
The built-in microphones are high-
performance electret condenser microphones.
Do not expose them to strong wind or water.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
92
• You may feel pain in your ears if you use the
headphones when the ambient air is very
dry. This is not because of a malfunction of
the headphones, but because of static
electricity accumulated in your body. You
can reduce static electricity by wearing non-
synthetic clothes that prevent the emergence
of static electricity.
• Should any solid object or liquid fall into the
unit, remove the batteries and have the unit
checked by qualified personnel before
operating it any further.
On using a memory card
• When formatting (initializing) a memory
card, make sure to use the PCM recorder to
format it. Memory cards formatted with
Windows or other devices may be
recognized as incompatible media and
cannot be used with the PCM recorder.
•
If you format a memory card containing
recorded data, the recorded data will be
deleted. Be careful not to delete important
data.
• Do not leave a memory card within the reach
of small children. They might accidentally
swallow it.
• Do not remove or insert a memory card
while recording or playing back files.
• Do not remove a memory card while
“Accessing...” appears on the display
window or the ACCESS indicator is flashing
in orange. Otherwise, data may be damaged.
• We do not guarantee the operations of all
types of compatible memory cards with the
PCM recorder.
• M2™ card other than those manufactured by
Sony have not been demonstrated as
operable with the PCM recorder, and may
have problems when used with the PCM
recorder. For compatible M2™, please refer
On maintenance
To clean the exterior, use a soft cloth slightly
moistened in water. Do not use alcohol,
benzine or thinner.
If you have any questions or problems
concerning your unit, please consult your
nearest Sony dealer.
Backup recommendations
To avoid potential risk of data loss caused
by accidental operation or malfunction of
the PCM recorder, we recommend that you
save a backup copy of your recorded tracks
on a tape recorder or to a computer, etc.
• “MagicGate™” is copyright protection
technology that uses encryption technology.
The PCM recorder does not support data
recording/playback that requires
MagicGate™ functions.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
93
• The PCM recorder does not support parallel
data transfer.
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
• A ROM (read-only-memory) type or write-
protected memory card is for playback only.
You cannot record or edit data on the card.
• SonicStage will create a group on a Memory
Stick™ media. The group function,
however, cannot be used except with a
compatible device.
– Humid locations or locations with
corrosive substances present.
• When using a memory card, make sure to
check the correct insertion direction into the
memory card slot.
• Data may be corrupted in the following
cases:
– When a memory card is removed or the
PCM recorder is turned off during a read
or write operation.
– When a memory card is used in locations
subject to static electricity or electrical
noise.
• We assume no responsibility for any loss or
damage of recorded data.
• We recommend that you save a backup copy
of the important data.
• Do not touch the terminal of a memory card
with your hand or a metal object.
• Do not strike, bend or drop a memory card.
• Do not disassemble or modify a memory
card.
• Do not expose a memory card to water.
• Do not use a memory card under the
following conditions:
– Locations beyond the required operating
conditions, including locations such as the
hot interior of a car parked in the sun and/
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
94
Specifications
Hardware environment:
– Port: USB port
– Sound board: Sound cards compatible
System requirements
Operating systems:
®
– Windows Vista Ultimate Service Pack
®
with any of the supported Microsoft
1 or higher
– Windows Vista Business Service Pack 1
®
Windows operating systems
®
PNotes
or higher
®
• Operation is not guaranteed if any operating
system other than those indicated on the left
(Windows 98 or Linux, etc.) is used.
• 64 bit versions of Windows XP are not
supported.
• For the latest version information and
compatibility with your operating system,
please access the support home page for the
PCM recorder:
– Windows Vista Home Premium Service
Pack 1 or higher
– Windows Vista Home Basic Service
Pack 1 or higher
– Windows XP Media Center Edition
2005 Service Pack 3 or higher
– Windows XP Media Center Edition
2004 Service Pack 3 or higher
®
®
®
®
®
®
http://www.sony-asia.com/support
– Windows XP Media Center Edition
Service Pack 3 or higher
– Windows XP Professional Service Pack
• The following systems are not supported:
– Operating systems other than the ones
indicated on the left
– Personally constructed computers or
operating systems
– Upgraded operating systems
– Multi-boot environment
®
3 or higher
®
– Windows XP Home Edition Service
Pack 3 or higher
®
– Windows 2000 Professional Service
Pack 4 or higher
– Multi-monitor environment
– Mac OS X (v10.2.8-v10.5)
– Pre-Installed
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
95
®
Bit rate and sampling frequencies for
MP3 files*
Bit rate: 32 kbps – 320 kbps, VBR
Sampling frequencies:
16 kHz/22.05 kHz/24 kHz/32 kHz/
44.1 kHz/48 kHz
When you are using Windows
2000 Professional
Install the driver using
1
“SonyRecorder_Driver.exe” in the PCM
recorder.
File extension: .mp3
PCM recorder section
*1
Not all encoders are supported.
Capacity (User available capacity)
Built-In Memory:
4 GB (approx. 3.60 GB =
3,865,470,566 Byte)
A part of the memory capacity is used as a
management area.
2
Bit rate and sampling frequencies* for
WMA files
Bit rate: 32 kbps - 192 kbps , VBR
Sampling frequencies: 44.1 kHz
File extension: .wma
*2
WMA Ver. 9 is compatible, however, MBR
(Multi Bit Rate), Lossless, Professional,
and Voice are not supported.
Copyright-protected file cannot be played
back.
Frequency range (in recording/
playback, LINE IN input)
• LPCM
96.00 kHz: 20 Hz – 40,000 Hz
(0 dB, –2 dB)
Not all encoders are supported
48.00 kHz: 20 Hz – 22,000 Hz
(0 dB, –2 dB)
44.10 kHz: 20 Hz – 20,000 Hz
(0 dB, –2 dB)
22.05 kHz: 20 Hz – 10,000 Hz
(0 dB, –3.5 dB)
Bit rate and sampling frequencies *3 for
AAC-LC (m4a) files
Bit rate: 16 kbps - 320 kbps, VBR
Sampling frequencies:
11.025 kHz/12 kHz/16 kHz/22.05 kHz/
24 kHz/32 kHz/44.1 kHz/48 kHz
File extension: .m4a
• MP3
320 kbps: 50 Hz – 15,000 Hz (0 dB, –3 dB)
128 kbps: 50 Hz – 15,000 Hz (0 dB, –3 dB)
64 kbps: 50 Hz – 13,000 Hz (0 dB, –3 dB)
*3
Copyright-protected file cannot be played
back.
Not all AAC encoders are supported.
Recording modes
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
96
Signal-to-noise ratio (S/N)
Playback speed control (DPC)
(Input from the LINE IN jack and output from
LINE OUT jack when recording/playing back
LPCM)
+100% to –75% (LPCM/MP3/WMA/AAC-
LC)
Maximum power output
250 mW
87 dB (1 kHz IHF-A) (for 24 bit)
General
Power requirements
DC 3.0 V: When using a commercially-
available applicable AC power adaptor
DC 3.0 V: LR6 (size AA) alkaline batteries
(supplied) (2)
Speaker
Approx. 16 mm dia.
Input/Output
DC 2.4 V: NH-AA nickel metal hydride
rechargeable batteries (not supplied) (2)
• Microphone jack (minijack, stereo), input for
plug in power
– Input impedance: 3.9 kΩ
– Minimum input level: 0.9 mV
– Rated input level: 2.5 mV
• LINE IN jack (minijack, stereo)
– Input impedance: 22 kΩ
– Minimum input level: 500 mV
– Rated input level: 2 V
Operating temperature
5°C - 35°C
Dimensions (w/h/d) (not incl. projecting
parts and controls) (JEITA)*
62.0 mm × 114.0 mm × 21.8 mm
4
• Headphone/LINE OUT jack (minijack,
stereo)
Headphone mode
4
Mass (JEITA)*
Approx. 187 g including 2 LR6 (size AA)
alkaline batteries
– Load impedance: 16 Ω
– Output level: 20 mW + 20 mW
LINE OUT mode
– Load impedance: 22 kΩ
– Rated output level: 1 Vrms
• USB connector (mini-B jack, High-speed
USB, Mass Storage Class)
• REMOTE jack
*4
Measured value by the standard of JEITA
(Japan Electronics and Information
Technology Industries Association)
Supplied accessories
• DC IN 3V jack
• Memory Stick Micro™ (M2™)/microSD
memory card slot
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Optional accessories
Stereo headphones MDR-7502,
MDR-7509HD, MDR-EX300SL,
MDR-EX500SL, MDR-V300
Electret condenser microphone ECM-MS957
Audio connecting cable RK-G129
Rechargeable battery NH-AA-B2K
Battery charger BCG-34HS2K
Carrying case speaker CKS-M10
Wind screen AD-PCM2
Tripod VCT-PCM1
Your dealer may not handle some of the above
listed optional accessories. Please ask the
dealer for detailed information.
Design and specifications are subject to
change without notice.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
98
5 6
Maximum recording time* *
The maximum recording time of all the folders is as follows (rounded figures by 5 minutes).
Recording modes
Built-in
memory
Memory card
4GB
1 GB
2 GB
4 GB
8 GB
16 GB
LPCM 96.00kHz/24bit 1 hr.
50 min.
25 min. 55 min.
1 hr.
55 min.
3 hr.
50 min.
7 hr.
45 min.
LPCM 96.00kHz/16bit 2 hr.
45 min.
40 min. 1 hr.
25 min.
2 hr.
50 min.
5 hr.
45 min.
11 hr.
35 min.
LPCM 48.00kHz/24bit 3 hr.
40 min.
50 min. 1 hr.
55 min.
3 hr.
50 min.
7 hr.
40 min.
15 hr.
30 min.
LPCM 48.00kHz/16bit 5 hr.
30 min.
1 hr.
2 hr.
5 hr.
45 min.
11 hr.
35 min.
23 hr.
15 min.
20 min. 50 min.
LPCM 44.10kHz/24bit 4 hr.
55 min. 2 hr.
5 min.
4 hr.
10 min.
8 hr.
25 min.
16 hr.
50 min.
LPCM 44.10kHz/16bit 6 hr.
1 hr.
25 min. 5 min.
3 hr.
6 hr.
15 min.
12 hr.
35 min.
25 hr.
20 min.
LPCM 22.05kHz/16bit 12 hr.
5 min.
2 hr. 6 hr.
55 min. 15 min.
12 hr.
35 min.
25 hr.
20 min.
50 hr.
40 min.
MP3 44.10kHz/320kbps 26 hr.
45 min.
6 hr. 13 hr.
27 hr.
50 min.
55 hr.
50 min.
111 hr.
55 min.
35 min. 50 min.
16 hr. 34 hr.
MP3 44.10kHz/128kbps 67 hr.
5 min.
69 hr.
40 min.
139 hr.
45 min.
279 hr.
45 min.
30 min. 45 min.
MP3 44.10kHz/64kbps 134 hr.
10 min.
33 hr.
69 hr.
35 min.
139 hr.
30 min.
279 hr.
30 min.
559 hr.
35 min.
(hr. : hours/min. : minutes)
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
99
*5
*6
When you are going to record continuously for a long time, you may have to replace the batteries
with new ones in the midst of recording. For details on the battery life, see the next table.
The maximum recording time varies if you record tracks in mixed recording mode.
*1
Battery life
When using Sony LR6 (SG) (size AA) alkaline batteries
Recording
without
Recording with
monitoring
Playback*2 Playback using
through speaker the headphones
Recording modes
monitoring
LPCM 96.00kHz/24bit
LPCM 96.00kHz/16bit
LPCM 48.00kHz/24bit
LPCM 48.00kHz/16bit
LPCM 44.10kHz/24bit
LPCM 44.10kHz/16bit
LPCM 22.05kHz/16bit
MP3 44.10kHz/320kbps
MP3 44.10kHz/128kbps
MP3 44.10kHz/64kbps
28 hr.
28 hr.
39 hr.
39 hr.
41 hr.
46 hr.
45 hr.
40 hr.
40 hr.
43 hr.
19 hr.
19 hr.
23 hr.
24 hr.
24 hr.
24 hr.
24 hr.
26 hr.
26 hr.
26 hr.
19 hr.
19 hr.
23 hr.
24 hr.
24 hr.
24 hr.
24 hr.
24 hr.
24 hr.
24 hr.
22 hr.
24 hr.
27 hr.
27 hr.
28 hr.
30 hr.
30 hr.
28 hr.
28 hr.
28 hr.
(hr. : hours/min. : minutes)
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
100
When using Sony NH-AA rechargeable batteries
Recording
without
Recording with
monitoring
Playback*2 Playback using
through speaker the headphones
Recording modes
monitoring
LPCM 96.00kHz/24bit
LPCM 96.00kHz/16bit
LPCM 48.00kHz/24bit
LPCM 48.00kHz/16bit
LPCM 44.10kHz/24bit
LPCM 44.10kHz/16bit
LPCM 22.05kHz/16bit
MP3 44.10kHz/320kbps
MP3 44.10kHz/128kbps
MP3 44.10kHz/64kbps
28 hr.
28 hr.
38 hr.
39 hr.
38 hr.
44 hr.
41 hr.
32 hr.
37 hr.
38 hr.
19 hr.
19 hr.
22 hr.
23 hr.
23 hr.
23 hr.
23 hr.
26 hr.
26 hr.
26 hr.
19 hr.
19 hr.
22 hr.
23 hr.
23 hr.
23 hr.
23 hr.
24 hr.
24 hr.
24 hr.
21 hr.
23 hr.
26 hr.
26 hr.
27 hr.
29 hr.
29 hr.
28 hr.
28 hr.
28 hr.
(hr. : hours/min. : minutes)
*1
The battery life is measured in testing using methods proprietary to Sony. The battery life may
shorten depending on how you operate the PCM recorder.
When playing back music through the internal speaker with the volume level set to 16.
*2
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
101
Troubleshooting
Troubleshooting
Before taking the PCM recorder for repair, check the following sections. Should any problem
persist after you have made these checks, consult your nearest Sony dealer.
Please note that recorded tracks may be deleted during service or repair work.
Symptom
Remedy
The PCM recorder cannot be • Slide the POWER/HOLD switch in the direction of “POWER” for
The PCM recorder cannot be • The power to the PCM recorder is off. Slide the POWER/HOLD
turned on.
switch in the direction of “POWER” for more than 1 second
Display does not disappear. • Remove the protective film on the display window before you use
Display appears blurred. the PCM recorder.
operate.
• The power to the PCM recorder is off. Slide the POWER/HOLD
switch in the direction of “POWER” for more than 1 second
• The HOLD function is activated. Slide the POWER/HOLD switch
No sound comes from the
speaker.
Sound comes from the
speaker even when the
headphones are plugged in.
• If you plug in the headphones not securely during playback, the
sound may come from the speaker. Unplug the headphones and
then insert them securely.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
102
Symptom
Remedy
The ACCESS indicator, peak • “LED” is set to “OFF”. Display the menu and set “LED” to “ON”
level indicators, z REC
button, N PLAY/ENTER
button, or X PAUSE button
indicators do not light.
“Memory Full” is displayed • The memory is full. Delete some of the tracks or delete all the
and you cannot start
recording.
“Track Full” is displayed and • 99 tracks have been recorded in the selected
folder. Therefore
you cannot operate the PCM you cannot record another track, or copy a track. Delete some of
recorder.
the tracks or delete all the tracks after you store them on your
Noise is heard.
• A button on the PCM recorder is pressed, the case is touched, or
the PCM recorder is held, so that noise was recorded.
• The PCM recorder was placed near an AC power source, a
fluorescent lamp or a mobile phone during recording or playback.
• Roaring noise from wind, or other noises from electric fans, air
conditioners, air cleaners, or PC fans have been recorded. You can
reduce the noise by setting the LCF(Low Cut Filter) function
• Plug of the connected microphone was dirty when recording.
Clean the plug.
• The headphone plug is dirty. Clean the plug.
The input sound is distorted. • The level is too high in automatic recording.
When a guide is displayed, set the MIC SENS(ATT) switch to
“LOW,” or place the PCM recorder away from the sound source.
If the problem persists, switch to manual recording, and adjust the
recording level manually using the REC LEVEL dial.
• The sound source has parts that are too loud. Set “LIMITER” in
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Symptom
Remedy
A howling noise is heard
during recording.
• If you turn up the volume excessively or place the headphones
near the microphone while monitoring recording, the microphone
may pick up the sound from the headphones, causing acoustic
feedback (howling sound). Turn down the volume, or place the
headphones far from the microphone.
You cannot divide a track.
• You need a certain amount of free space in the memory to divide a
track.
• If 99 tracks have been recorded in the selected
folder, you
cannot divide a track in that folder. Delete some of the tracks or
delete all the tracks after you store them on your computer
• Because of the system limitations, you may not be able to divide a
track at the very beginning or end of the track.
• You can divide or move a track recorded using the PCM recorder
only. An MP3/WMA/AAC-LC (m4a) /LPCM (WAV) file copied
from a computer cannot be divided or moved.
When recording from other • Connect the headphone jack of other equipment to the
equipment, the input level is
too strong or not strong
enough.
m (microphone) jack of the PCM recorder and adjust the volume
level with the equipment connected to the PCM recorder.
Playback speed is too fast or • The playback speed is adjusted in DPC. Slide the DPC (SPEED
too slow.
CTRL) switch to “OFF” or adjust the playback speed in the
“--:--” is displayed.
“--y--m--d” or “ --:--” is
displayed on the recording
date display.
• The date of recording will not be displayed if you recorded the
track when the clock was not set.
There are fewer menu items • The menu items displayed are different depending on the
displayed in the menu mode. operation modes (stop mode, playback mode, and recording
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
104
Symptom
Remedy
The battery life is short.
level set to 16. The battery life may shorten depending on the
operation of the PCM recorder.
There is no battery power
• Even if you do not use the PCM recorder, the batteries are
remaining after you have left consumed slightly. The battery life in this case varies depending
the batteries inserted for long on humidity or other environmental conditions. Usually, the
time without using the PCM
recorder.
batteries last about 4 months. If you do not intend to use the PCM
recorder for an extended period of time, it is recommended that
you turn the power off diligently or remove the batteries
The battery life of the
rechargeable batteries are
short.
• You are using the rechargeable batteries in an environment with a
temperature of under 5 °C. Charge the batteries in an environment
with a temperature of 5 °C - 35 °C.
• The PCM recorder has not been used for a certain time. Charge
and discharge the rechargeable batteries using the PCM recorder
several times.
• Replace the old ones with new rechargeable batteries.
The memory card is not
recognized.
• Since the memory card may contain image data or other files, the
memory required for creating initial folders is insufficient. Use
Windows Explorer or other tools to delete unwanted files or
• Select “Memory Card” for the “Memory” item of the menu
• Remove a memory card and check the side of the memory card.
A character in a folder or
track name is displayed in
unreadable characters.
• The PCM recorder cannot support or display some special
characters and symbols that are entered on a computer using
Windows Explorer or the Macintosh desktop.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
105
Symptom
Remedy
The “Accessing...” display • If the PCM recorder is required to process a large amount of data,
does not disappear.
the message may be displayed for an extended period of time.
This is not a malfunction of the PCM recorder. Wait until the
message disappears. In this case, do not remove the batteries or an
AC power adaptor, while the message is displayed.
It takes a long time to copy a • If the file size of a track is large, it takes a considerable time to
track. finish copying. Please wait until the copying is finished.
The PCM recorder does not • You cannot use the USB AC adaptor for the PCM recorder.
operate with the USB AC
adaptor.
The copied tracks are not
displayed.
• The PCM recorder can recognize up to 8 levels of folders copied
to the PCM recorder.
• If tracks are incompatible, other than an LPCM (WAV)/MP3/
WMA/AAC-LC (m4a) file that the PCM recorder support, they
It takes a long time for the
PCM recorder to start.
• If the PCM recorder is required to process a large amount of data,
it may take longer for the PCM recorder to start. This is not a
malfunction of the PCM recorder. Wait until the start-up display
disappears.
Menu does not reflect the
change in settings.
• Batteries might have been removed just after the menu settings. In
this case, the change in settings may not be reflected.
Some character information • When the “Level Meter in Playback” in the menu is set to “ON,”
does not appear.
you can scroll the title name only. When “OFF” is selected, you
can scroll the file name. In both cases, artist name cannot be
operate correctly.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
106
Symptom
Remedy
The PCM recorder does not • You may have formatted the memory of the PCM recorder using a
operate.
computer. Use the PCM recorder formatting function to format
The PCM recorder is not
recognized by your
computer.
A folder/file cannot be
copied from your computer.
• Disconnect the PCM recorder from your computer and reconnect
it.
• Do not use a USB hub or USB extension cable other than the
supplied USB connecting cable. Connect the PCM recorder to
your computer using the supplied USB connecting cable.
• Operation is not guaranteed if you use any system requirements
other than those described on page 95.
• Depending on the USB port position of the computer you are
using, the PCM recorder may not be recognized. If there are
multiple USB ports, try another port.
The file copied from your
computer cannot be played
back.
• The file format may differ from those that can be played back
the file name.
The computer cannot start. • If you reboot the computer with the PCM recorder connected to
the computer, the computer may freeze or may not start properly.
Disconnect the PCM recorder from the computer and reboot the
computer again.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
107
Error Messages
Error message
Cause/Remedy
Low Battery Level
• You cannot format the memory or delete all the files in a folder
because of insufficient battery power. Prepare new batteries to
replace the current ones.
Change Battery
Power Problem
• Batteries are exhausted. Replace the old LR6 (size AA) alkaline
batteries with new ones. Or charge the rechargeable batteries, or
• An incompatible AC power adaptor may be connected. Check the
specifications of the AC power adaptor you are using. Use a
commercially-available AC power adaptor applicable to the PCM
Memory Full
• The remaining memory capacity of the PCM recorder is
• If you copy a large number of files or folders to the directory that
is located immediately below “MEMORY CARD” on the
computer, editing operations with the PCM recorder may become
disabled. Save a backup copy of unwanted files or folders on your
computer and delete them from the PCM recorder.
Track Full
• When there are already 99 tracks in the selected folder, you cannot
record a new track. Delete some tracks before recording a new
T-MARK(Track Marks) are • You can set up to 98 track marks for a track. Cancel unwanted
Cannot Divide - Exceeding • When there are already 99 tracks in the selected folder or the total
Maximum Number of Tracks number of files stored in the PCM recorder exceeds the maximum,
in Folder
you cannot divide a track. Delete some tracks before recording a
new track.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
108
Error message
Cause/Remedy
File Damaged
• You cannot play or edit tracks, because the data of the selected file
is damaged.
Format Error
• The PCM recorder has been formatted using a computer. You
cannot perform operations, including recording or playing,
because there is no copy of the control file required for operation.
Format the PCM recorder using the formatting function in the
menu.
Process Error
• The PCM recorder failed in memory access. Remove and then re-
insert the batteries.
• Save a backup copy of your data and format the PCM recorder
using the menu.
Memory Card Error
• An error occurred while a memory card was being inserted into
the memory card slot. Remove and try inserting it again. If this
message persists, use a new memory card.
Set Clock
• Set the clock.
Empty Folder
• The selected folder does not have any tracks.
Same File Name Exists
• A track of the same file name already exists in the destination
folder when a file is named or copied to the other memory media.
No Entry
• There are no tracks with “TAKE” or “KEEP” attached to their
file names.
No T-MARK(Track Mark) • There are no track marks when you attempt to delete or locate a
track mark.
No Memory Card
• There is no memory card inserted into the memory card slot when
you attempt to set the “Memory” or “Cross-Memory Recording”
menus.
File Protected
• The selected track is protected or is a “Read only” file. You
cannot delete it. You can release the “Read only” attribute using
the PCM recorder.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
109
Error message
Cause/Remedy
Memory Card Locked
• The memory card is write-protected. You cannot record, delete, or
edit tracks. To save a track on the card, use a non-write-protected
memory card.
Read Only Memory Card
• A read-only memory card is inserted. You cannot record, delete,
or edit tracks.
Memory Card Access
Denied
• Since a memory card containing an access control function is
inserted, you cannot use it.
Memory Card Not Supported • A memory card that the PCM recorder does not support is
inserted. Use a compatible memory card.
Unknown Memory Card
• A memory card inserted is incompatible.
Stop and Reinsert Memory • A memory card was inserted during recording or playback.
Card
Remove the memory card and insert it while the PCM recorder is
in the stop mode.
Unknown Data
• The data does not have a file format which the PCM recorder
supports.
The file formats (file extensions) that the PCM recorder supports
are LPCM (.wav) files, MP3 (.mp3) files, WMA (.wma) files, and
(page 96).
• The copyright-protected files cannot be played back.
Invalid Operation
• You cannot copy a track or divide a track, because there is more
than one folder that has files with same name. Change the file
names.
• You cannot divide or set a track mark to a track not recorded using
the PCM recorder.
• The “Divide All T-MARK(Track Marks)” cannot be executed
because there is a track mark within 0.5 seconds from the dividing
position.
• The file name has reached the maximum number of characters;
you cannot divide or add “TAKE/KEEP.” Shorten the file name.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
110
Error message
Cause/Remedy
New Track
• The file size of the track being recorded has reached the maximum
file size: 1 GB for MP3 files, and 2 GB for a LPCM file. The file
will be divided automatically and recording will continue as a new
track.
Only Effective During
MANUAL Recording Mode recording), you cannot enable “LIMITER” in the menu.
• When the REC LEVEL switch is set to “AUTO” (automatic
Level Too High
Set MIC SENS to LOW
Or Adjust MIC Position
• When the REC LEVEL switch is set to “AUTO” (automatic
recording), the message is displayed when the PCM recorder
detects the microphone level is too high to continue automatic
recording. If the MIC SENS(ATT) switch is set to “HI,” set it to
“LOW.” Or, place the PCM recorder far from the sound source. If
the message persists, switch the REC LEVEL switch to
“MANUAL” (manual recording).
Continue Recording in
Different Memory
• When the “Cross-Memory Recording” in the menu is enabled and
the memory currently being used becomes full during recording,
the PCM recorder switches to the other memory and continues
recording.
Change Folder
• If there are no tracks in the
the display window. Only a folder with a track will be displayed.
folder, no folders are displayed in
Deleted T-MARK(Track
• When there is a track mark set within 0.5 seconds from the
Marks) Too Close to Divided dividing position, the track mark is automatically deleted.
Position
Invalid when LINE OUT
Setting
• When “Audio Out” is set to “LINE OUT,” the sound volume
adjustment with the VOLUME +/– buttons is disabled. Set the
“Audio Out” to “Headphones.”
System Error
• A system error other than the above has occurred. Remove the
batteries and re-insert them.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
111
System Limitations
There are some system limitations of the PCM recorder. Troubles as mentioned below are not
malfunctions of the PCM recorder.
Symptom
Cause/Remedy
You cannot record tracks up • If you record tracks in a mixture of the recording modes, the
to the maximum recording
time.
recordable time varies from the maximum recording time of the
highest recording mode to those of the lowest recording mode.
• The sum of the number on the counter (elapsed recording time)
and the remaining recording time may be less than the PCM
recorder’s maximum recording time.
You cannot display or play • If you have copied music files using your computer, those files
back music files in order of
copying.
may not be copied in order of copying because of the system
limitations. If you copy a music file one by one to the PCM
recorder, you can display and play back tracks in order of
copying.
A track/music file is divided • The track/music file being recorded has reached the maximum
automatically.
size limit (1 GB for an MP3/WMA/AAC-LC file, 2 GB for an
LPCM file), therefore it is divided automatically.
You cannot enter lower-case • Depending on the combination of the characters used for the
characters.
folder name that was made on your computer, those characters
may change to all capitals.
“s” is displayed in place of • A character which cannot be displayed on the PCM recorder has
a folder name, title, artist
name, or file name.
been used. Using your computer, replace it with one which can be
displayed on the PCM recorder.
When you set A-B Repeat
playback, the set positions
move a little.
• Depending on the files, the set positions may move.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
112
Display Window
Display when stop or recording
Level meter display when playback
A Operation mode indicator
Displays the following, depending on
the current operation mode
: stop
: playback
: recording
: recording standby/recording
pause (The indicator flashes.)
: playback pause (The indicator
flashes.)
: review/fast backward,
cue/fast forward
In manual recording
Display when playback (without
level meter display)
: going backward/forward
continuously
B Time indication
Each time you press DISPLAY button,
the time indication changes in the
following order: elapsed time (hours,
minutes, seconds), remaining time
(hours, minutes, seconds), recording
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
113
date (year, month, day), and recording
time (hour, minute)
I Folder indication
Displays the information of the current
folder:
C Level meter display in Auto (AGC)
recording mode
: A folder where you can record a
track (folder number)
: A folder whose folder number
cannot be obtained.
In manual recording, the level meter
whose colors are reverse is displayed.
D Auto (AGC) recording indication
:A folder for playback only
In the manual recording mode, a peak
level value is displayed.
J Recording mode indicator
Displays the recording mode set using
the menu when the PCM recorder is in
the stop mode, and displays the current
recording mode when the PCM
recorder is in the playback or recording
mode.
22/16, 44/16, 44/24, 48/16, 48/
24, 96/16, 96/24: LPCM file recorded
with the PCM recorder
E Memory Card indication
When a “Memory Card” is selected as
“Memory,” the indication is displayed.
When the “Built-In Memory” is
selected, no indication is displayed.
F Battery indicator
G The track mark number at the current
position/the number of all the track
marks
64k, 128k, 320k: MP3 file
Appears when a track mark is set for a
track.
recorded with the PCM recorder
When the files are copied from your
computer, file formats only are
displayed.
H Selected track number/Total number of
tracks in the folder
:WMA files copied
: AAC-LC (m4a) files copied
Displays as follows when the PCM
recorder cannot get the recording mode.
: Unknown
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
114
K File information
P Protect indicator
: Appears when the protect is set
The file name of the track is displayed.
L Limiter indicator
for a track.
Q Repeat playback
: Appears when the LIMITER is
set for a track.
: Appears when one track is
played back repeatedly.
M LCF(Low Cut Filter) indicator
: Appears when tracks in one
folder are played back repeatedly.
: Appears when all the tracks
are played back repeatedly.
: Appears when the LCF(Low
Cut Filter) is set for a track.
N Remaining recording time indication
Displays the remaining recording time
of the memory currently being used in
hours, minutes, and seconds.
If there is more than 10 hours time
remaining, the time is displayed in
hours.
If there is more than 10 minutes and
less than 10 hours time remaining, the
time is displayed in hours and minutes.
If there is less than 10 minutes time
remaining, the time is displayed in
minutes and seconds.
R Key Control indicator
Displays the Key Control is set for a
track:
: Tone is adjusted higher than the
natural step (from #1 to #6 in each
halftone step)
: Tone is adjusted lower than the
natural step (from 21 to 26 in each
halftone step)
S Effect indicator
Displays when Effect is set for a track.
: Bass1
: Bass2
O Track information indication
Track information is displayed:
Track title name
T Level meter to display L/R channels
output levels
Artist name
(Depending on the menu setting, the
level meter is displayed.)
U Peak position marker
V Peak level
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
115
K
L
M
Menu
N
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
117
P
T
U
R
S
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
118
Trademarks
• “Memory Stick™,”
, “Memory Stick™” and
“Memory Stick Micro™” (M2™) are trademarks
or registered trademarks of Sony Corporation.
• “MagicGate™” is a trademark of Sony
Corporation.
• microSD and microSDHC logos are trademarks of
SD-3C, LLC.
• Microsoft, Windows, Windows Vista and Windows
Media are registered trademarks or trademarks of
the Microsoft Corporation in the United States and/
or other countries.
• Apple, Macintosh and Mac OS are trademarks of
Apple Inc., registered in the USA and other
countries.
• MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and Thomson.
• Sound Forge is a trademark or registered trademark
of Sony Creative Software, Inc. in the United
States and other countries.
All other trademarks and registered trademarks are
trademarks or registered trademarks of their
respective holders. Furthermore, “ ™ ” and “®” are
not mentioned in each case in this manual.
GB
Download from Www.Somanuals.com. All Manuals Search And Download.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
|