4-129-231-11 (1)
P/N7525000004A
Digital Photo
Frame
DPF-D82/D92
Using an external device
(with Bluetooth)
Using an external device
(with a computer)
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-D82/D92
Serial No. ________________________
© 2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of waste batteries
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
Perchlorate Material: Lithium battery contains
perchlorate.
be treated as household waste. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negative consequences for
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
the environment and human health which could
otherwise be caused by inappropriate waste handling
of the battery. The recycling of the materials will help
to conserve natural resources. In case of products that
for safety, performance or data integrity reasons
require a permanent connection with an incorporated
battery, this battery should be replaced by qualified
service staff only. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
This symbol on the product
or on its packaging indicates
that this product shall not be
Notice for the customers in the
countries applying EU Directives
treated as household waste.
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Continued
3 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On trademarks and copyrights
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission of copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holders claim for damages.
•
, BRAVIA, BRAVIA Sync,
,
“PhotoTV HD”,
Stick”,
, Cyber-shot, , “Memory
, “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO Duo”,
, “Memory Stick PRO-HG
, “Memory Stick
Duo”,
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of there’s portrait may also
infringe their rights.
Micro”,
ROM”,
,
, “Memory Stick-
, “MagicGate”, and
are trademarks or registered
trademarks of Sony Corporation.
• Microsoft, Windows, and Windows Vista are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
• Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
For some demonstrations, performances, or
exhibits, photography may be forbidden.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a
backup copy of your data.
• CompactFlash is a trademark of SanDisk
Corporation in the U.S.A.
Information
•
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
• The Bluetooth word mark and logos are owned by
the Bluetooth SIG, Inc. and any use of such marks
by Sony Corpration is under licence. Other
trademarks and trade names are those of their
resective owners.
• Contains iTypeTM and fonts from Monotype
Imaging Inc.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
iTypeTM is a trademark of Monotype Imaging Inc.
• All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned in
each case in this manual.
• This unit is equipped with face recognition feature.
Sony Face Recognition technology developed by
Sony is used.
Notes on LCD screen
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the viewing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
4 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for users
Program © 2009 Sony Corporation
Documentation © 2009 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-D92 unless noted
otherwise.
5 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adding images to the internal
Searching for an image
Adjusting the image size and
Table of Contents
Enjoying your photo frame in various
Changing the settings of the auto
To display the photo frame on
Connecting to the AC power
Operating an external device
Using an external device
Connecting to a Bluetooth
Using an external device
Changing the settings of
6 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
7 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xVarious modes
The displayed image can be switched
automatically as though you are turning the
pages of an album yourself. You can select
from various modes, including just images, a
clock, or calendar view. You can also change
playback settings such as the playback order.
Features
xSupport for various memory cards*
Supports various memory cards and other
devices, such as a “Memory Stick”,
CompactFlash card, SD memory card, xD-
Picture Card, and USB memory. Just insert a
memory card removed from a digital camera
or other device, and you will be able to view
xAdding images to internal memory
The images you add to the album are saved
xVarious display functions
You can enjoy various viewing modes, such
as the slideshow display, Clock and calendar
display, Single view mode, and Index image
xExporting images
You can export images in the album to your
Continued
9 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xSearch function
xEasy transfer of images taken with a
Bluetooth compatible mobile phone
or other device*
You can transfer images to the photo frame's
internal memory from a Bluetooth
compatible device via a Bluetooth adaptor
You can search for images by the date,
folder, image direction, and mark.
xAlarm function
The photo frame announces the specified
time on the image and using sound.
xDisplaying images on a wall
You can hang the photo frame on the wall.
xAutomatic rotation of images
The photo frame automatically rotates
images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
* We do not guarantee proper operations for all types
of devices.
10 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking included
items
Identifying the parts
For details, see the pages indicated in the
parentheses.
Make sure that the following items are
included.
The illustrations are of the DPF-D92. The
locations and names of buttons and connectors
of the DPF-D82 are identical to those of the
DPF-D92, although the LCD screen size and
shape is different.
• Digital photo frame (1)
• Stand (1)
• Remote control (1)
• AC adaptor (1)
• Operating Instructions (this manual) (1)
• Read This First (1)
• Warranty (1)
Front
(In some regions, the warranty is not
supplied.)
A LCD screen
B Remote sensor
When using the supplied remote control, point
it at this sensor.
Continued
11 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear
A Connector for USB A/Bluetooth
F “Memory Stick PRO” (Standard/
You can transfer images wirelessly from a
BLUETOOTH™ compatible mobile phone or
digital camera by connecting a Bluetooth
adaptor (optional: DPPA-BT1).
G Access lamp
H Standby indicator
I 1 (on/standby) button
You can also connect a digital camera, USB
memory, or photo storage compatible with
USB mass storage.
J MENU button
Displays the menu.
From the menu, you can operate the same
functions as those of the buttons on the
remote control, such as [Slideshow Settings],
[Rotate], [Add to album] and [Date/time
settings].
B
Connect a USB cable when you want to use
the photo frame with a computer.
K Direction (B/b/v/V) buttons,
Insert the plug of the supplied AC adaptor to
this jack, and connect to the wall outlet.
Press B/b/v/V to select the menu items. Then
press
to enter the selection.
L BACK button
Returns to the previous screen.
The date/time setting, alarm settings, and the
auto power on/off settings return to their
factory default setting. Use a long, thin object,
such as a pin, to push the switch.
N CompactFlash card/Microdrive
O SD memory card/MMC/xD-Picture
12 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
B SLIDE-SHOW ( ) button
This button switches from the single view
mode to the index image display.
D SINGLE (
) button
E MENU button
F BACK button
G 1 (on/standby) button
I Zoom in ( )/Zoom out ( ) buttons
K Direction (B/b/v/V) buttons
L
(enter) button
M ROTATE (
) button
14 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
1 Pull out the battery holder.
While pressing in the tab of the battery
holder, pull out the battery holder.
Protective sheet
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
2 Remove the old battery from the
battery holder and then insert a new
battery.
Insert the battery so that “+” is facing
upwards.
Remote
sensor
3 Reinsert the battery holder into the
remote control.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Notes
• When the lithium battery becomes weak, the
operating distance of the Remote control may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
Note
The photo frame may fall if you use the buttons on the
photo frame when it is hanging on the wall. Operate
the photo frame using the remote control.
Continued
15 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using a battery other than the specified one may
result in the battery rupturing.
Setting the stand
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
1 Hold the photo frame tightly and
insert the stand straight into the
screw hole on the rear panel.
• Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
– Do not recharge the battery.
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
2 Screw the stand into the screw hole
About descriptions in this
manual
firmly until the stand stops turning.
The operations described in this manual are
based on remote control operation. When an
operation is performed differently, for example,
with the remote control and the buttons on the
photo frame, it will be explained in a tip.
Setting to portrait or landscape
orientation
You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.
16 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When the photo frame is placed in the portrait
orientation, the image is also automatically
rotated to its proper orientation.
To display the photo
frame on the wall
The directions indicated on the direction button
on the rear panel depend on the orientation of
the photo frame.
You can hang the photo frame on the wall
using the following procedure.
1 Prepare screws (not supplied)
suitable for the screw holes on the
rear panel.
4mm (3/16 inch)
More than 25mm (1 inch)
4.2mm
Notes
(3/16 inch)
• Check whether the stand is stable. If the stand is not
set properly, the photo frame may fall over.
8.6mm
(11/32 inch)
• When the photo frame is placed in the portrait
orientation, the Sony logo doesn't light up.
Holes for hanging
the unit on the wall
• The photo frame does not detect and rotate the
orientation of images when [Auto display
orientation] on the
[OFF].
(Settings) tab is set to
2 Screw the screws (not supplied) into
the wall.
• A magnet is contained in the storage portion of the
stand. Do not keep anything that is easily affected
by magnetism, such as a cash card or credit card,
near the photo frame.
Be sure the screws (not supplied) protrude
between 2.5 to 3mm (1/8 inch) from the
surface of the wall.
Tip
It is easier to turn the stand if you wind or wrap a
rubber band tightly around the stand when you
remove the stand from the photo frame.
Between
2.5mm to 3mm
(1/8 inch)
3 Hang the photo frame on the wall by
fitting the hole on the rear panel to
the screws on the wall.
Notes
• Use screws suitable for the quality of the material of
the wall. The screws may be damaged, depending
on the type of material used in the wall. Set the
screws in a pillar or stud in the wall.
Continued
17 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you want to re-insert the memory card,
remove the photo frame from the wall, then eject
and re-insert the memory card while the photo
frame is placed on a stable surface.
Connecting to the AC
power source
• Store the stand in the place provided when you hang
the photo frame on the wall.
• Connect the plug of the supplied AC adaptor to the
photo frame and set the power switch to ON. And
then connect the AC adaptor to the wall outlet after
hanging the photo frame on the wall.
1 Insert the plug of the AC adaptor
into the DC IN 12 V jack on the rear
of the photo frame.
• We take no responsibility for any accidents or
damage caused by defects of attachment, misuse, or
natural disasters, etc.
2 Connect the AC adaptor to the wall
outlet.
To the DC IN 12 V jack
To wall outlet
AC adaptor
Notes
• The socket outlet should be as close as possible to
the unit, and easily accessible.
• Do not place the photo frame in an unsteady
location such as on an unsteady table or tilted
surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
18 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Insert the plug of the AC adaptor firmly, if the
connection is loose, the photo frame may turn off
when it is moved.
Turning the photo frame
on
• After use, remove the AC adaptor from the
DC IN 12 V jack of the photo frame, and remove
the AC adaptor from the outlet.
When the power switch is set to
off
When the power switch is set to on, the standby
indicator turns green and the Sony logo on the
front panel lights up.
• Even if your photo frame is turned off, AC power
(house current) is still supplied to it while connected
to the wall outlet via the AC adaptor.
• Do not turn the photo frame off or disconnect the
AC adaptor from the photo frame before the
standby indicator turns red. Doing so may damage
the photo frame.
When the power switch is set to
on
Press 1 (on/standby) on the photo frame or
remote control to turn on the power. The
standby indicator turns to green from red. The
Sony logo on the front panel lights up.
Continued
19 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning off the power
Setting the current time
Hold 1 (on/standby) on the photo frame or
remote control until the power turns off. The
standby indicator turns to red from green.
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from the photo frame before the standby
indicator turns red. Doing so may damage the photo
frame.
1 Press MENU.
The menu screen is displayed.
2 Press B/b to select the
(Settings) tab.
Operations in an initial state
When the photo frame is turned on without a
memory card connected, the initial display
below appears on the screen.
The settings screen is displayed.
Tip
You can use the B/b button only when a
memory card is inserted in the photo frame, an
external device is connected, or anything other
than the clock and calender settings item
3 Press
v
/V to select [Date/time
settings] and then press
.
The Date/time settings screen is displayed.
If the photo frame is not operated for 10
seconds, the demo mode is displayed. If any
other button than the power button is pressed,
the screen returns to the initial display.
First, press MENU during the initial display,
and then set the date and time.
4
5
Adjust the date.
1Press v/V to select [Date] and then
press
.
2Press B/b to select year, month, and
day, and then press v/V to select a
value, then press
.
Adjust the time.
1Press v/V to select [Time] and then
press
.
2Press B/b to select hour, minute, and
second, and then press v/V to select a
value, then press
.
20 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Select the format of the date.
1Press v/V to select [Date Display Order]
Inserting a memory card
and then press
2Press v/V to select a format and then
press
.
Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of the photo frame).
.
• Y-M-D
• M-D-Y
• D-M-Y
7 Set the day to start the week for the
calendar.
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
You can set the day that appears on the
very left when the calendar is displayed.
1Press v/V to select [First Weekday] and
then press
2Press v/V to select [Sunday] or
[Monday] and then press
.
For details on the memory cards you can use
.
Access lamp
8
Select the time display.
1Press
and then press
2Press /V to select [12 hours] or
[24 hours] and then press
v/V to select [12hr/24hr display]
.
v
.
9 Press MENU.
The menu screen is closed.
Insert the memory card firmly into the
corresponding slot with its label side facing
toward you. The slot order from the top is
“Memory Stick” (“Memory Stick Duo”),
CompactFlash card, SD memory card and xD-
Picture Card.
Continued
21 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
a Sony digital camera. Any other file (such as files
made or edited using a computer or RAW files
taken by digital cameras other than a Sony digital
camera, etc.) may not be displayed.
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
Notes
• When inserting the memory card, it will only insert
part of the way, so do not try to force it as this could
damage the memory card and/or photo frame.
• This photo frame has a slot that is both a “Memory
Stick” standard and Duo size compatible slot, so
you do not need a “Memory Stick” adaptor.
• The SD memory card/xD-Picture Card dual-
purpose slot automatically detects the card type.
Display priority of images
If a memory card is inserted or an external device is
connected, the images of the inserted memory card or
connected device are displayed automatically.
To manually change the memory card or external
device to be displayed, specify it in
(Select
The photo frame displays the images of the
memory card in the following priorities.
• Memory card t The device connected to the
USB A/Bluetooth connector t internal memory
• If multiple memory cards are inserted when the
photo frame is turned on, the images of the first
memory card you inserted take priority and are
displayed.
• If multiple devices are inserted while the photo
frame is turned off, the priority order for display is
as follows.
“Memory Stick” b CompactFlash card
b SD memory card/xD-Picture Card b internal
memory
However, priority is given to the device which was
displayed on the screen when you turned the photo
frame to OFF.
• If no memory card is inserted and no device is
connected, the images saved in the album in the
internal memory are displayed.
Notes
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often.
• The photo frame can display JPEG image files
compatible with DCF format or RAW files taken by
22 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the display
1 Press VIEW MODE.
The view mode screen is displayed.
3 Press B/b/v/V or VIEW MODE to
select the style you want and then
press
.
Note
You cannot select a group other than the Clock and
calendar display when there is no image stored in the
internal memory.
2 Select the group you want.
Group
Explanation
Displays a slideshow display
style.
Slideshow
Displays a clock or calendar
style.
Clock and
calendar
Displays a single image
style.
Displays a thumbnail list
style.
Index
Tip
Select the group you want using B/b after
moving the cursor to the group area using B/b/
v/V, when you operate the photo frame using
the buttons on the photo frame.
23 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Slideshow display
Group
Image
Style
Explanation
Single view
Images are displayed on a single screen, one
after another, with the effect selected in the
[Slideshow Settings] menu.
A
Slideshow
Multi image view
Clock view
Displays multiple images at the same time.
B
C
D
Displays images with the present date and time.
Calendar view
Displays images, one after another, while
showing a calendar. The present date and time
is displayed.
Time Machine
Random view
Displays images with the shooting date and
time. The present date and time cannot be
displayed.
E
F
Displays images while randomly switching
between a number of different slideshow styles
and effects.
A
B
C
D
E
F
• You can set the interval, effect, listing order, or
color effect when you select the slideshow display.
Tips
• If the power is on, and no memory card is inserted,
and no device is connected, the images stored in
internal memory are displayed. If no images are
saved in internal memory, demonstration mode
starts automatically. Demonstration mode ends if a
button other than 1 (on/standby) is pressed.
• You can select the single view mode when you
press
on the photo frame when the image you
want appears in the slideshow display.
• You can use the VIEW MODE button on the photo
frame.
• For details on the playback order in a slideshow
display, see page 46.
24 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock and calendar display
Clock1
Clock6
Clock2
Clock7
Clock3
Clock8
Clock4
Clock9
Clock5
Clock10
Clock11
Calendar1
Calendar2
Calendar3
Lunar Calendar
(when you select
[Simplified
Arabic Calendar
(when you select
[Arabic] in
Farsi Calendar
(when you select
[Persian] in
Chinese] in
[Language setting]) [Language setting])
[Language setting])
Note
Tip
You can select only the
Clock and calendar display is displayed.
(Settings) tab when the
You can use the VIEW MODE button on the photo
frame.
25 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Single view mode
Group
Image
Style
Explanation
Entire image
Displays an entire image in the screen. You can
switch the images to be displayed by pressing
B/b.
A
Fit to screen
Displays an image over the whole screen. You
can switch the images to be displayed by
pressing B/b.
B
C
Entire image (with
Exif)
Displays image information, such as the image
number, file name, and shooting date while
displaying the entire image. You can switch the
images to be displayed by pressing B/b.
Refer to “About the information display”
(page 28) for details on the image information.
Fit to screen (with
Exif)
Displays image information, such as the image
number, file name, and shooting date in fit to
screen mode. You can switch the images to be
displayed by pressing B/b.
D
Refer to “About the information display”
(page 28) for details on the image information.
A
B
C
D
Tips
• If the power is on, and no memory card is inserted,
and no device is connected, the images stored in
internal memory are displayed. If no images are
saved in internal memory, demonstration mode
starts automatically. Demonstration mode ends if a
button other than 1 (on/standby) is pressed.
• You can set the image display mode by pressing
VIEW MODE and pressing B/b to select either
entire image or fit to screen mode. Not all images
are able to use the fit to screen mode.
• You can use the VIEW MODE button on the photo
frame.
26 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index image display
Group
Image
Style
Explanation
Index 1
Displays a list of large thumbnails. You can
A
select an image by pressing B/b/v/V.
Index
Index 2
Index 3
Displays a list of thumbnails. You can select an
image by pressing B/b/v/V.
B
C
Displays a list of small thumbnails. You can
select an image by pressing B/b/v/V.
A
B
C
Tips
• A thumbnail is a small-sized image for index use
that is recorded in the pictures taken by a digital
camera.
• If the power is on, and no memory card is inserted,
and no device is connected, the images in internal
memory are displayed. If no images are saved in
internal memory, demonstration mode starts
automatically. Demonstration mode ends if a button
other than 1 (on/standby) is pressed.
• You can select the single view mode when you
press
on the photo frame when the image you
want appears in the index image display.
• You can use the VIEW MODE button on the photo
frame.
Continued
27 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4Setting information
About the information display
Icons
Meaning
Protect indication
Associated file indication
(Displayed when there is an
associated file such as a motion
file or a miniature e-mail image
file.)
Displays when you have
registered a mark.
5Image number (folder-file number)
This is displayed if the image is DCF
compliant.
The following information is displayed.
1Display type
– Entire image
– Fit to screen
6Shooting date/time
– Entire image (with Exif)
– Fit to screen (with Exif)
2Image display order/Total number of images
Input indications for an image are displayed.
Icons
Meaning
“Memory Stick” input
SD Memory Card input
CompactFlash input
xD-Picture Card input
External Device input
Internal memory input
3Image details
– File format (JPEG(4:4:4), JPEG(4:2:2),
JPEG(4:2:0), BMP, TIFF, RAW)
– Number of pixels (width × height)
– Manufacturer name of image input device
– Model name of image input device
– Shutter speed (e.g.: 1/8)
– Aperture value (e.g.: F2.8)
– Exposure value (e.g.: +0.0EV)
– Rotation information
28 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Changing the settings of the
slideshow
Enjoying a slideshow
You can display images stored in the internal
memory or on a memory card, one after
another, automatically.
1 Press MENU.
The menu is displayed.
The slideshow starts from the last image that
was displayed the previous time, if you set the
power switch to OFF in the standby mode, or
turn the photo frame to ON from the standby
mode.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Slideshow
Settings] and then press
The slideshow settings screen is
displayed.
.
1 Press VIEW MODE.
The view mode screen is displayed.
2 Select
(slideshow).
Tip
Select
(slideshow) using B/b after moving
the cursor to the group area using B/b/v/V
when you operate the photo frame using the
buttons on the photo frame.
4 Press v/V to select the item and
then press
.
Refer to the tables on the next page for
details on the setting items.
Notes
• Note the following when you select a slideshow
using the image stored on the memory card.
3 Press B/b/v/V to select the style you
– Due to one of the characteristics of the memory
card devices, images may be subject to data
error when read too often.
want, then press
.
– Do not run a slideshow for a long time with a
small number images. This may cause data
error.
– We recommend you back up images on the
memory card often.
• When the photo frame is, for instance, displaying a
slideshow, changes to the settings of some items are
unavailable. These items are displayed in gray and
cannot be selected.
Refer to “Slideshow display” (page 24)
for details on the slideshow styles.
• The slideshow starts from the first image if you set
the power switch to OFF before entering the
standby mode, if you reset the photo frame.
Continued
29 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the screen is too bright, it may make you feel
nauseous. Be careful that you do not make the
brightness settings too bright when you use the
photo frame.
Tip
You can also use the VIEW MODE button on the
photo frame.
30 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Interval
Set a value from 3 sec., 7 sec.*, 20 sec., 1 min., 5 min., 30 min., 1 hour,
3 hours, 12 hours, 24 hours for the interval between images.
Note
An image may not switch at the intervals you set on the menu, depending
on the style of the slideshow.
Effect
Center cross
Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds
Horiz. blinds
Fade*
Transitions to the next image as though blinds are
being lowered vertically.
Transitions to the next image as though blinds are
being pulled horizontally.
Transitions to the next image by fading out the current
image and fading in the next image.
Wipe
Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random
ON
Uses the above five effects randomly.
Displays images randomly.
Shuffle
OFF*
Cancels shuffle playback.
Color effect
Color*
Sepia
Displays an image in color.
Displays an image in a sepia color.
Displays an image in monochrome.
Monochrome
Display Mode
You can select the view mode for the single image display.
Note
The original image data will not change.
Entire image*
Displays an entire image enlarged to proper size. (An
image may be displayed with margins on the top,
bottom, left and right.)
Fit to screen
Zooms in at the center of the image enough to fill the
whole screen.
Note
An image may not display with the display size you set
on the menu, depending on the style of the slideshow.
31 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Refresh mode
Adding images to the
internal memory
Due to one of the characteristics of the device,
images stored for a long time or read many
times may be subject to data error when read
too often.
You can use the photo frame as a digital album,
saving important images in the internal
memory.
This photo frame refreshes the internal memory
automatically to prevent these errors,
depending on the status of the internal memory.
Tip
In [Image file size] of the menu, you can preset
whether to optimize the size of images or save images
as is, without compressing them, when you save them
The confirmation screen used for refreshing the
internal memory is displayed automatically
when the refresh is needed.
When [Image file size] is set to [Album], up to
approx. 2,000 images can be added to the album.
When set to [Original], the number of images that can
be saved may vary, depending on the original image
file size.
The refresh starts when you select [OK]. The
Refresh also starts automatically when no
operation is attempted for 30 seconds. If you
select [Cancel], the confirmation screen used
for refreshing the internal memory is displayed
the next time.
1 Press
(Album) when an image
stored on the memory card or the
external device is displayed on the
screen.
Tip
Select [Add to album] using v/V after pressing
the MENU button and then select
(Editing) using B/b.
Single image display
Do not turn the photo frame to OFF while the
internal memory is being refreshed. It may
cause a malfunction.
It may take approximately 5 minutes to refresh
the internal memory.
Notes
• We recommend that you perform a backup of your
data periodically to avoid losing it.
• Do not run a slideshow with less than 10 images
continuously if you have set the interval time for the
slideshow to 3 seconds. You may not be able to
protect some images in the internal memory.
32 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Slideshow display
1Press B/b/v/V to select the image to
add to the album and then press
check mark will be attached to the
check box of each selected image.
Repeat this operation to add multiple
images at the same time.
. A
Index image display
To cancel the selection, select images to
cancel and then press
to delete the
check mark in the check box.
2Press MENU.
The confirmation screen used for
selecting a folder is displayed.
2 Press v/V to select [Add this image],
[Selected images] or [Add all
4 Press v/V to select the folder you
images] and then press
.
want and press
.
If you select [Add this image], the image
currently displayed is added to the album.
Go to step 4. (This item cannot be selected
on the slideshow display.)
The confirmation screen used to decide
whether to add an image or not to the
internal memory is displayed.
If you select [Selected images], you can
select the image you want to add from the
image list. Go to step 3.
If you select [Add all images], the image
list is displayed. A check mark is attached
to the check box of all the images. Go to
step 4.
3 Specify the image to add from the
image list.
Tip
About the image list
A new folder is created automatically when you
select [New folder].
During a search: Displays all the images
applicable to the criteria used for the
search.
5 Press v/V to select [Yes] and then
press
.
Other than during a search: Displays all
images in the device displayed on the
screen.
The image is saved in the specified folder
in internal memory.
Refer to “Searching for an image
Continued
33 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press
when the confirmation
screen is displayed.
Exporting an image
Notes
You can export the images in the internal
memory to a memory card or external device.
• Images in the internal memory cannot be added to
the album.
• Do not turn off the power, remove the memory card,
or disconnect the external device while an image is
being added. Doing so may damage the photo frame
or memory card, or damage the data.
1 Press MENU when an image stored
on the internal device is displayed
on the screen.
The menu is displayed.
Tips
• To perform this operation using the remote control,
press the MENU button on the remote control and
then press v/V to select [Add to album] from
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
(Editing) and then press
.
• You can also use the MENU button on the photo
frame.
3 Press v/V to select [Export] and
then press
.
• You can change the thumbnail size using [
the image list.
/
] in
The Export menu is displayed.
Single image display
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often. We recommend that you perform a
backup of your data periodically to avoid losing it.
4 Press v/V to select [Export this
image], [Selected images] or [Export
all images] and then press
.
If you select [Export this image], the
image currently displayed is exported to
the device. Go to step 6. (This item cannot
be selected on the slideshow display.)
If you select [Selected images], you can
select the image you want to export from
the image list. Go to step 5.
If you select [Export all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
34 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Specify the image to export from the
image list.
7 Press v/V to select the folder you
want to save to and press
.
About the image list
The confirmation screen used to decide
whether to export or not is displayed.
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays the
image list of the album on the screen.
Refer to “Searching for an image
1Press B/b/v/V to select the image you
want to export and then press
. A
check mark will be attached to the
check box of each selected image.
Repeat this operation to export multiple
images at the same time.
Tip
A new folder is created automatically when you
select [New folder].
To cancel the selection, select images to
8 Press v/V to select [Yes] and then
cancel and then press
to delete the
press
.
check mark in the check box.
2Press MENU.
The exporting is finished.
The screen used for selecting the device
to which to export is displayed.
9 Press
when the confirmation
screen is displayed.
The image is copied to the specified
device.
6 Press v/V to select the device to
which to export the image and then
press
.
Note
Do not turn off the power, remove the memory card,
or disconnect the external device during exporting.
Doing so may damage the photo frame or memory
card, or damage the data.
Tips
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image to export when
you select the index image display.
• Any device that is not recognized by the photo
frame is displayed in gray and you cannot select it.
35 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the selection, select images to
cancel and then press to delete the
check mark in the check box.
2Press MENU.
Deleting an image
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
The delete confirmation screen is
displayed.
6 Press v/V to select [Yes] and then
2 Press B/b to select the
tab.
(Editing)
press
.
The image is deleted.
The screen used for editing is displayed.
7 Press
when the confirmation
screen is displayed.
3 Press v/V to select [Delete] and
then press
.
To format the internal memory
4 Press v/V to select [Delete this
image], [Selected images] or [Delete
1 Press MENU.
all images] and then press
.
The menu is displayed.
If you select [Delete this image], the
image currently displayed is deleted. Go
to step 6. (This item cannot be selected on
the slideshow display.)
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Initialize] and then
If you select [Selected images], you can
select the image you want to delete from
the image list. Go to step 5.
press
.
4 Press v/V to select [Format internal
memory] and then press
.
If you select [Delete all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
The confirmation screen used for
initializing the internal memory is
displayed.
5 Press v/V to select [Yes], then press
.
5 Specify the image to delete from the
image list.
Notes
About the image list
• When the message [Cannot delete a protected
image.] appears on the screen, the image file was set
to Read Only on a computer. In this case, connect
the photo frame to a computer, and delete this file
using the computer.
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays all
images in the device displayed on the
screen.
• The total capacity of the internal memory is not
equal to the remaining capacity, even immediately
after initialization.
• If deletion has started, the deleted image cannot be
recovered even if you stop deletion. Delete images
only after confirming you actually want to delete
them.
Refer to “Searching for an image
1Press B/b/v/V to select the image to
delete and then press
. A check mark
will be attached to the check box of
each selected image.
Repeat this operation to delete multiple
images at the same time.
36 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Registering a mark
• You can also use the MENU button on the photo
frame.
You can produce a slideshow only with images
which have been selected beforehand and have
been marked. You can easily check for images
with marks using the index image display or
single view mode.
• You can enlarge or reduce the image when you
select the index image display.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Marking] and
then press
.
4 Press v/V to select the mark you
want and then press
.
5 Press v/V to select [Mark this
image], [Selected images] or [Mark
all images] and then press
.
If you select [Mark this image], the image
currently displayed will be marked and
showed in the future. Go to step 7. (This
item cannot be selected on the slideshow
display.)
If you select [Selected images], you can
select the image to which you want to
attach a mark from the image list. Go to
step 6.
If you select [Mark all images], the image
list is displayed. A check mark is attached
Continued
37 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
to the check box of all the images. Go to
step 7.
[Unmark all images]
During a search: Removes a marks from all the
images applicable to the criteria specified in the
search.
6 Specify the image to which you want
to attach a mark from the image list.
About the image list
Other than during a search: Removes all marks
from all images stored on the device displayed.
During a search: Displays all the images
applicable to the criteria used for the
search.
Note
A mark is removed when the power is turned off, or if
you remove the memory card or the external device if
you have attached a mark to an image stored on a
memory card or the external device.
Other than during a search: Displays all
images in the device.
Refer to “Searching for an image
Tips
1Press B/b/v/V to select the image to
which to attach and then press . A
check mark will be attached to the
image. Repeat this operation to attach a
mark to multiple images at the same
time.
• You can select a mark from among 3 types.
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image when you
select the index image display.
To cancel the selection, select an
imeges you want to cancel and then
press
to remove the check mark
from the check box.
2A mark will be attached to the image
for which a check mark has been placed
in the check box.
If a check mark is removed from the
check box of an image, the mark will be
removed from the image.
7 Press v/V to select [Yes] and then
press
.
The mark is attached to the selected
image.
To delete the registration of a
mark
Select [Unmark this image] or [Unmark all
images] and then press
in step 5. You can
also cancel the selection when you remove the
check mark from the check box.
[Unmark this image]: Removes a mark from
the image currently displayed. (This item
cannot be selected on the slideshow display.)
38 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the search for an
image
Press the MENU button when an image is
displayed on the screen and then select [Exit
search (show all photo)].
Searching for an image
(Filtering)
You can search for an image which is stored in
internal memory or on a memory card. You can
filter an image using various criteria, such as
the date, the folder in which the image is saved,
the orientation of the image or mark, etc.
To change the criteria for a
search
Press the BACK button when an image you
searched for is displayed on the screen.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
Notes
• Do not turn off the power, remove the memory card,
or disconnect the external device during a
searching. Doing so may damage the photo frame or
memory card, or damage the data.
2 Press B/b to select the
(Editing)
tab.
• The search is cancelled automatically in the
following cases.
The screen used for editing is displayed.
– When you change the playback device
Note
– When you search for an image which is stored
on a memory card or external device and then
remove that memory card or external device
You cannot select the
the clock and calendar are displayed.
(Editing) tab when
3 Press v/V to select [Search] and
Tip
then press
.
You can also use the MENU button on the photo
frame.
4 Press v/V to select the criteria you
want and then press
.
• [Search by date]: Filters by the date.
• [Search by folder]: Filters by the folder.
• [Search by vertical/horizontal]: Filters
by the image orientation.
• [Search by mark]: Filters by the mark.
5 Press v/V to select the item you
want and then press
.
39 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying the playback Adjusting the image size
device
and position
You can specify the memory card or external
device to be displayed.
Enlarging/reducing an image
You can enlarge or reduce an image in single
view mode.
1 Press MENU.
The menu is displayed.
1 To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
2 Press B/b to select the
(Select
device) tab.
The screen used for selecting a device is
displayed.
Each press of the button enlarges the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The screen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
Tip
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Press
v/V to select the method used to save the
image.
• If you select [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
Insert the device at this point during the
procedure if the device you want to use cannot
be selected.
3 Press v/V to select the device you
want to display and then press
The images of the selected device are
displayed.
.
Tips
• You can also use the MENU button on the photo
frame.
v/V to select [Yes] and then press
to
save the image. Press again when the
confirmation screen is displayed after saving
is finished.
• The search is cancelled automatically when you
change the playback device during a search.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image using the
buttons on the photo frame.
40 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Rotating an image
• The information used to rotate the image is retained
even after the power is turned off.
Press ROTATE ( ) on the remote
control.
Each press of the button rotates the image 90
• You can rotate the image of the index image
display.
degrees counter-clockwise.
Operate from the menu of the
photo frame
1 Press MENU in single display mode.
The menu is displayed.
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Rotate] and
then press
.
The Rotate menu is displayed.
4 Press v/V to select the direction to
rotate and then press
.
•
:
Rotates the image 90 degrees
clockwise.
•
:
Rotates the image 90 degrees counter-
clockwise.
5 Press v/V to select [OK] and then
press
.
Note
An enlarged image cannot be rotated.
41 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Set the time setting.
Changing the settings of
the auto power on/off
function
[Simple]
The timer function to turn the photo frame on/
off automatically can be set. Main power needs
to be switched ON for this function.
1 Press MENU.
1Press v/V to select [Auto power ON/
The menu is displayed.
OFF] and then press
2Press v/V to select [Enable] and then
press
.
2 Press B/b to select the
(Settings) tab.
.
3Set the auto on/off timer.
The settings screen is displayed.
Press v/V to set the time you want.
AM or PM is displayed on the right of
the screen when you select [12 hours]
on the time display setting.
3 Press v/V to select [Auto power ON/
OFF] and press
.
The screen used for setting a value for
4Set the auto ON/OFF day.
[Auto power ON/OFF] is displayed.
Press v/V to select the day you want to
use this function and then press
to
check. Press v/V to select [OK] and
then press
.
[Advanced]
4 Press v/V to select [Simple] or
[Advanced] and then press
.
[Simple]: Sets the auto power ON/OFF
function finely in one minute increments.
[Advanced]: Sets the auto power ON/OFF
function according to a day of the week by
one hour units.
1Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
changes to blue after you press
. The
power supply of the photo frame will be
turned on when the blue time zone time
occurs. The color of the selected time
42 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
zone changes to gray, after you select
the blue time zone and then press
The power supply of the photo frame is
turned off while it is in the gray time
zone.
.
Using the alarm function
You can use the photo frame as an alarm clock.
Tip
Setting the alarm
The power is turned off automatically at the
time you set for [Auto power OFF] when
you are using the photo frame.
Set to the alarm switch on the rear panel
to ON.
Under condition of main power switch set to
“On”, the alarm sound and alarm mode screen
will appear at the scheduled alarm time.
The power is turned on automatically at the
time you set for [Auto power ON] during the
standby mode.
2Press B/b/v/V to select [OK].
To turn off the alarm
Set the alarm switch on the rear panel to OFF.
The alarm is stopped although an alarm screen
continues to be displayed.
The normal screen is displayed after you press
any button on the photo frame other than 1
(on/standby).
Continued
43 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the time to be alarmed
Changing the settings
You can change the following settings.
1 Press MENU.
The menu is displayed.
• Slideshow Settings
• Alarm Setting
• Auto power ON/OFF
• Date/time settings
• General Settings (Listing Order, Sony logo
ON/OFF etc,.)
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Alarm Setting]
and press
.
• Language setting
• Initialize
Setting procedure
Note
Only internal memory can be formatted.
4 Press v/V to set the time you want.
Tips
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
• Auto power on/off will not function during alarm is
set off.
The settings screen is displayed.
• When alarm sets off at scheduled time, power will
also turn on regardless of auto off settings. Main
power needs to be set at ON for alarm to operate.
44 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press v/V to select the item you
Tip
want to change and then press
.
You can also use the MENU button on the photo
frame.
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
4 Press v/V to select the item you
want to change and then press
This enables you to set each of the items
.
Note
When the photo frame is, for instance,
displaying a slideshow, some settings of some
items cannot be changed. They are displayed in
gray and cannot be selected.
5 Press v/V to select a setting value
and then press
.
Each time you press v/V (v/V from the
photo frame), the setting value changes. In
the case of a numerical value, press V to
increase the value and press v to decrease
the value.
If you press
, the setting is confirmed.
6 Press MENU.
The menu closes.
To reset to factory default
settings
1 Press MENU and then select
(Settings) -
[Initialize] by pressing B/b/v/V.
2 Press v/V to select [Reset] and then press
.
All adjusted values, except for the clock
settings, are reset to the default settings.
Continued
45 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Items to set
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Alarm Setting
Auto power
ON/OFF
Sets the timer function which turns the power supply of the photo frame on or off,
Simple
Power-ON
timer
You can set [Power-ON timer] ([Enable] or [Disable]),
[Auto ON time] and [Auto ON day].
You can set the timer (hour/minute) for the power to
turn on automatically.
Power-OFF
timer
You can set [Power-OFF timer] ([Enable] or
[Disable]), [Auto OFF time] and [Auto OFF day].
You can set the timer (hour/minute) for the power to
turn off automatically.
Advanced*
OK
Returns to the previous screen after confirming the
operation.
Cancel
Returns to the previous screen after cancelling the
operation.
Reset all
Deletes all the selected times.
Setup method
Advanced*
Sets the auto power ON/OFF function according to a
day of the week by one hour units.
Simple
Sets the auto power ON/OFF function finely in one
minute increments.
Date/time
settings
General
Settings
Listing Order
Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number Order* Displays images in order of file name.
Shoot. Date
Displays images in order of shooting date.
Auto display
orientation
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
LCD backlight
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
Beep
ON*/OFF: Sets the beep sound on/off.
Image file size
Album*
Compresses images and saves them to the internal
memory.
Original
Saves images to the internal memory without
compressing them. There is no deterioration, but you
can save fewer images.
Sony logo ON/
OFF
ON*/OFF: You can set whether the photo frame's Sony logo lights or not.
46 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
*: Factory default settings
Item
Setting
Description
Displays the version of the firmware of the photo frame.
System
Version
Information
Internal
memory
Memory
capacity
Indicates the maximum amount of space available in
internal memory in the initial state.
Remaining
capacity
Indicates the amount of free space currently available
in internal memory.
Bluetooth
Address
Displays when the Bluetooth adapter is connected to the photo frame.
Language
setting
Sets the display language on the LCD screen.
Japanese, English*, French, Spanish, German, Italian, Russian, Korean, Simplified Chinese,
Traditional Chinese, Dutch, Portuguese, Arabic, Persian, Hungarian, Polish, Czech, Thai,
Greek, Turkish, Malay, Swedish, Norwegian, Danish, Finnish
Note
Default language setting may vary in some regions.
Initialize
Format internal You can format the internal memory.
memory
Notes
• All the images added to the internal memory will be deleted.
• Do not format the internal memory by using a connection to a PC or
other external device.
Reset
Returns all settings to their factory defaults except for the current date and
time setting of the [Date/time settings].
47 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating an external
device connected to the
photo frame
You can connect a mass-storage-complaint
digital camera, a USB memory device, a photo
storage device, or other external device to the
photo frame and display an image directly from
the external device.
Notes
External
• We cannot guarantee connection with all types of
mass storage devices.
memory or
other external
device
• The playback device will be switched to the
external device if you connect the external device to
the USB A/Bluetooth jack during playback the
internal memory.
5 Select the playback device.
1 Connect the photo frame to the AC
An image on the device is displayed on
the screen.
For details on the slideshow, refer to
page 29. For details on adding images to
2 Set the digital camera or external
device to mass storage connection
mode.
The setting and operation method used
before connecting differ depending on the
digital camera or external device. Refer to
the operating instructions supplied with
the digital camera or external device. (If
you are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
Notes
• When using a commercially available USB cable,
use an A-Type USB cable that is less than 3 meters
long.
• Do not disconnect the USB cable or turn the photo
frame and external device off while the access lamp
on the external device is flashing. Doing so may
damage the data stored on the external device. Sony
assumes no responsibility for any damage or loss of
data.
3 Turn the photo frame to ON.
• A USB hub or USB device with a built-in USB hub
may not work properly.
4 Connect the digital camera or
external device to the USB A/
Bluetooth connector.
• The photo frame cannot use data that has been
encrypted or compressed using, for instance,
fingerprint authentication or a password.
Use the USB cable supplied with the
digital camera or external device to
connect to the photo frame.
48 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an external device (with Bluetooth)
1 Connect the photo frame to the AC
Connecting to a
Bluetooth device
2 Turn the photo frame to ON.
You can connect a Bluetooth adaptor (optional)
to the USB A/Bluetooth connector of the photo
frame and transfer images from a Bluetooth
compatible mobile phone or other device. The
transferred images are saved in internal
memory.
3 Connect the Bluetooth adaptor
(optional) to the USB A/Bluetooth
connector.
is displayed on the upper portion of
the screen when the guide is displayed.
Note
Note
If any device, other than the Bluetooth adaptor,
such as a memory card, camera, PC, or other
USB memory device or a USB cable is
connected to any of the memory card slots, or
the USB A/Bluetooth connector, disconnect it
from the photo frame and then connect the
Bluetooth adaptor.
You cannot send a file to other Bluetooth compatible
devices from the photo frame.
Compatible profiles for Bluetooth
communication
The DPF-D82/D92 supports the following
profiles:
4 Check the Bluetooth address.
You can display the address from [System
Information]. (page 46)
• BIP (Basic Imaging Profile)
Image Push Responder
• OPP (Object Push Profile)
Object Push Server
For the profiles that your Bluetooth device
supports, please refer to its manual.
What is a “Profile”?
A profile consists of the standards that enable
Bluetooth wireless communication. There are
several profiles available, depending on the
purposes and product to be used. To make
Bluetooth communication possible, the devices
used in the communicated should support the
same profile.
Tip
The address is displayed only when the
Bluetooth adaptor is connected.
Compatible image file formats that can
be displayed
5 Transfer an image from the
Bluetooth-compliant mobile phone,
or other device to the photo frame.
The image transferred is saved on the
internal memory.
See page 64.
Maximum number of pixels that can be
handled
See page 64.
Note
You cannot transfer an image to the memory
card of a digital photo frame.
Continued
49 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
– Where a wireless LAN is established or a
microwave oven is being used near-by, or other
electromagnetic waves are emitted.
• We cannot guarantee that this product works with
all devices enabled with Bluetooth wireless
technology.
• Sony cannot assume any responsibility for any
information leakage that may be caused by the use
of Bluetooth communications.
• Sony cannot accept responsibilities for any failure
to satisfy the protection requirements resulting from
a non-recommended modification or use of the
product.
For customer support information, please refer to
the operating instructions of the photo frame.
Bluetooth
compatible mobile
phone
P Caution
• Radio waves from a Bluetooth device may
adversely affect the operation of electrical and
medical devices, and could lead to accidents due to
malfunctions. Make sure to turn off the product and
mobile phone and do not use this product in the
following places:
To select the photo frame from a
Bluetooth-compliant device, select “Sony
DPF-D92 ##,” “Sony DPF-D82 ##.”
(“##” stands for the two figures from the
right of the address displayed in [System
Information].)
– Inside medical facilities, trains, airplanes, gas
stations or other places that may emit flammable
gas.
– near automatic doors or fire alarms or other
automatically controlled devices.
When input of Passkey* is required
Input “0000.” You cannot change the
Passkey with the photo frame.
• Keep this product at least 22 cm away from cardiac
pacemakers. Radio waves from this product may
adversely affect the operation of cardiac
pacemakers.
* A Passkey is often referred to as a “pass
code” or “PIN code.”
Notes
• We cannot guarantee that this product works with
all devices enabled with Bluetooth wireless
technology.
• Do not use the DPPA-BT1 outside the area you
purchased it. Depending on the area, the use of this
product may violate the local radio wave
regulations and may be subject to penalty.
• The communication distance of the product may
vary depending on the obstacles between the
product (a human body, metal objects, or a wall)
and the mobile phone or other device.
• The sensitivity of the Bluetooth communication
may be affected under the following conditions:
– When there is an obstacle between the product
and the mobile phone or other product such as a
human body, metal objects, or a wall.
50 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using an external device (with a computer)
Connecting to a computer to
Connecting to a
exchange images
computer
1 Connect the photo frame to the AC
You can connect to a computer to view and
copy images from the internal memory of the
2 Connect the computer and photo
photo frame to the computer, and copy images
from the computer to the photo frame.
frame with a commercially available
USB cable (optional: VMC-
14UMB2)*.
System requirements
To connect a computer to the picture frame,
your computer must satisfy the following
recommended system requirements.
x Windows
Recommended OS: Microsoft Windows Vista
SP1/Windows XP SP3/Windows 2000
Professional SP4
Port: USB port
To USB B
connector
x Macintosh
Recommended OS: Mac OS X (10.4 or later)
Port: USB port
Notes
• If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
Computer
To USB connector
• You cannot operate the photo frame from another
USB device being used simultaneously.
* This cable may not be available in all
countries.
• Do not disconnect the USB cable during data
communication.
Note
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
Use a B-Type USB cable that is less than 3
meters long.
• The photo frame has been demonstrated as operable
when connected to PC or Sony digital photo printer.
When other devices are connected to the photo
frame, these devices may not recognize the internal
memory of the photo frame.
3 Turn the photo frame to ON.
4 When the [AutoPlay] window
appears on the computer display,
click [Open folder to view files].
If the [AutoPlay] window does not appear,
click [Computer (My Computer)] in the
Continued
51 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Cancel “Read Only” before saving image files from
a computer on the photo frame.
Start menu, and then open the removable
disc.
5 Move the cursor in this window and
right click, and then click [New] -
[Folder].
Disconnecting your computer
Disconnect the USB cable or turn the photo
frame to OFF after disconnecting it from your
computer.
Name this new folder. In this manual, the
folder name “sony” is used as an example.
1 Double-click
on the Task Tray.
2 Click (USB Mass Storage
Device) t [Stop].
3 Click [OK] after checking the drive
you want to remove.
6 Double click to open this “sony”
folder.
7 Open the folder that contains the
image files you want to copy, and
then copy the image files by using
drag-and-drop.
Notes
• When saving images from a computer in the
internal memory, make a folder in the internal
memory and save the images in this folder. If you
do not make a folder, you can only save up to 512
images. In addition, the number of images may be
reduced depending on the file name length or
character type.
• A paticular image may not be displayed in order of
the shooting date on the index image display, etc as
the information on the shooting date may have been
changed or lost when you edited or saved that image
file on a computer.
• When images from the computer are saved in the
internal memory of the photo frame, the image files
are saved without being compressed. As a result,
fewer images may be able to be saved to the internal
memory of the photo frame.
• Image files made or edited on a computer may not
be displayed. Image files set to “Read Only” on a
computer cannot be deleted on the photo frame.
52 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
If an error message appears
If an error occurs, one of the following error messages may be displayed on the LCD screen of the
photo frame. Follow the corresponding solution below to solve the problem.
Error message
Meaning/Solutions
No Memory Stick. / No
• A memory card is not inserted in a slot. Or, an external
device is not connected to the USB A/Bluetooth connector.
Insert a memory card in the corresponding slot. Or, connect
CompactFlash card. / No SD
Memory Card. / No xD-Picture
Card. / No External Device.
An incompatible Memory Stick is • An unsupported memory card is inserted. Or, an
inserted. / An incompatible
CompactFlash card is inserted. / An
incompatible SD Memory Card is
inserted. / An incompatible xD-
Picture Card is inserted. / An
incompatible External Device is
inserted.
unsupported external device is connected to the
USB A/Bluetooth connector. Use a memory card or
external device that is supported by the photo frame.
No images on file.
• There is no image file that can be displayed on the screen
of the photo frame on the memory card or the external
device. Use a memory card or on external device
containing image files that can be displayed with the photo
frame.
Cannot delete a protected image.
• To delete a protected file, cancel the protection on your
digital camera.
Media is protected. Remove
protection then try again.
• The memory card is write-protected. Slide the write-
The Memory Stick is full. / The
CompactFlash card is full. / The SD
Memory Card is full. / The xD-
Picture Card is full. / The External
Device is full.
• No more data can be saved because the memory card, the
internal memory, or the external device is full. Delete
images, or use a memory card or external device with free
space available.
Error reading the Memory Stick. / • An error has occurred. If this error message is displayed
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card. / Error reading
the External Device.
frequently, check the status of the memory card or external
device with a device other than the photo frame.
• In the case of an external device:
The external device may be write-protected. Cancel the
write-protection setting for the device you are using. The
internal memory of a digital camera may be write-
protected.
Write error in the Memory Stick. /
Write error in the CompactFlash
card. / Write error in the SD
Memory Card. / Write error in the
xD-Picture Card. / Write error in
the External Device.
Format the internal memory.
Continued
53 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error message
Meaning/Solutions
The Memory Stick is read only.
• A “Memory Stick-ROM” is inserted. To save the images,
use the “Memory Stick” recommended.
The Memory Stick is protected.
• A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
Media format not supported.
Cannot open the image.
• The images cannot be displayed if the image file is not
supported by the photo frame.
No more USB hubs can be
connected.
• Connect the device directly to the photo frame, or use a
device without a built-in USB hub.
Incompatible USB device. Check
device’s USB settings.
• Connect a device with support for mass storage. If the USB
setting of your device is incorrect, set the mass storage
mode in the USB setting.
54 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If trouble occurs
Before submitting the photo frame for repair, try using the following guidance to solve the problem.
If the problem persists, consult with your Sony dealer or Sony service facilities.
Power supply
Symptom
The power cannot • Is the power plug inserted
be turned on.
Check item
Cause/Solutions
c Insert the power plug properly.
properly?
Displaying images
If the power is turned on but images are not displayed or the settings of the operation screen cannot
be configured, confirm the following check items.
Symptom
Check item
Cause/Solutions
No images are
displayed on the
screen.
• Is a memory card inserted or c Insert a memory card or connect an
an external device connected
properly?
• Does the memory card
contain images saved with a
digital camera or other
device?
• Are images stored on the
external device?
c Insert a memory card containing images
or connect an external device containing
images.
c Check the file formats that can be
• Is the file format compatible c A file that is not compatible with DCF
with DCF?
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
Images are not
played back in the
order of shooting
date.
• Were these images saved
from a computer?
• Were these images edited on
a computer?
c The information on the shooting date may
be changed or lost when you edit or save
an image file on a computer.
Continued
55 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
Some images are
not displayed.
• Are the images displayed in c If the image is displayed in the index view
the index view?
but cannot be displayed as single image,
the image file may be damaged even
though its thumbnail preview data is fine.
c A file that is not compatible with DCF
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file may not be supported by the
photo frame because, for example, it is a
JPEG file that was created with your
computer. Also, the image file may be
supported, but not contain thumbnail data.
Select the mark and press
to change
• Were the images created
with an application on a
computer?
the screen to the single image display. If
the mark on the left is displayed again, the
image cannot be displayed because the
image file is not supported by the photo
frame.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file is supported by the photo
frame, but the thumbnail data or image
itself cannot be opened. Select the mark
and press
. If the mark shown on the
left is displayed again, the image cannot
be displayed.
• Are there more than 9,999
images in the memory card
or external device?
c The photo frame can play, save, delete, or
otherwise handle up to 9,999 image files.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on the photo frame.
• Are there eight or more
levels in the folder hierarchy
of the memory card or
external device?
c The photo frame cannot display images
saved in a folder that is more than eight
levels deep.
56 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
The file name is
not displayed
properly.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the file name may not be able
to be displayed properly on the photo
frame. Also, for a file created on a
computer or other device, a maximum of
ten characters from the beginning of the
file name can be displayed.
Note
Only alphanumeric characters can be displayed.
Blank areas appear • Is the image extremely tall or c If an image is extremely tall or wide,
at the top and
wide?
blank areas may appear because of the
bottom.
ratio between the height and width.
Saving and deleting images
Symptom
Check item
Cause/Solutions
Cannot save an
image.
• Is the memory card write-
protected?
c Cancel write-protection and try saving
again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
[LOCK] position?
• Is the memory card full?
c Replace the memory card with one with
sufficient free space. Or, delete any
• Is the internal memory full? c Delete any unwanted images.
• Did you save images from a c If you do not make a folder, you can only
computer to the internal
memory without making a
folder in the internal
memory?
save up to 512 images. In addition, the
number of images may be reduced
depending on the file name length or
character type. When you save images in
the internal memory from a computer, be
sure to make a folder in the internal
memory and save the images in this
folder.
Continued
57 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
Cannot delete an
image.
• Is the memory card write-
protected?
c Use the device you are using to cancel
write-protection and try deleting again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
[LOCK] position?
• Are you using a “Memory
Stick-ROM”?
c It is not possible to delete an image from
or format a “Memory Stick-ROM”.
• Is this image protected?
c Check the image information from the
c An image with a
mark is set to Read
Only. You cannot delete it on the photo
frame.
An image was
deleted
c An image cannot be recovered once it is
deleted.
—
accidentally.
Connecting a digital camera or other external device
Symptom
Check item
Cause/Solutions
The camera is
connected but
nothing is
• Is the cable connected
properly?
c Connect the cable properly.
• Is the photo frame turned
on?
c Turn both the photo frame and the camera
to ON.
displayed.
Nothing happens
even if the USB
cable is
disconnected and
then re-connected.
c An over current error may have occurred
with the photo frame. To recover from the
error, turn the power of the photo frame
off and then back on.
—
Photo frame
Symptom
Check item
Cause/Solutions
Nothing happens
even if you operate
the photo frame.
c Push the reset switch on the back of the
photo frame using a long, thin object such
—
c Set the power switch to off, and then set it
58 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
Symptom
Check item
Cause/Solutions
Nothing happens
even if you operate
the remote control.
remote control properly?
c Insert a battery in the proper orientation.
c Point the top end of the remote control
towards the remote sensor on the photo
—
c Remove any obstruction between the
remote control and the remote sensor.
59 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Precautions
while it is connected to the wall outlet via the
AC adaptor.
• Be sure to use the AC adaptor supplied with
the photo frame. Do not use other AC
adaptors, as this may cause a malfunction.
• Do not use the supplied AC adaptor for other
devices.
• Do not use an electrical transformer (travel
converter), as this may cause overheating or
a malfunction.
Safety
• Be careful not to set or drop any heavy
objects on the power cord, or to damage the
power cord in any way. Never operate this
photo frame with a damaged power cord.
• Should any solid object or liquid fall into the
cabinet, unplug the photo frame and have it
checked by qualified personnel before
operating it any further.
• In case the cord of the AC adaptor is
damaged, do not use it any longer, as this
may be dangerous.
On moisture condensation
• Never disassemble the photo frame.
• To disconnect the power cord, pull it out by
the plug. Never pull the power cord itself.
• When the photo frame is not going to be
used for an extended period of time,
disconnect the power cord from the wall
outlet.
• Do not handle the photo frame roughly.
• To reduce the risk of electrical shock, always
unplug the photo frame from the electrical
outlet before cleaning and servicing the
photo frame.
If the photo frame is brought directly from a
cold location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases the
photo frame will probably not work properly
and may even develop a fault if you persist in
using it. If moisture condensation occurs,
unplug the AC adaptor of the photo frame and
do not use the photo frame for at least one hour.
On transport
When you transport the photo frame, remove
the memory card, external devices, AC adaptor,
and connected cables from the photo frame and
put the photo frame and its peripherals in the
original box with the protective packaging.
Installation
• Avoid placing the photo frame in a location
subject to:
– vibration
– humidity
– excessive dust
– direct sunlight
If you no longer have the original box and
packing parts, use similar packing material so
that the photo frame will not be damaged while
being transported.
– extremely high or low temperatures
• Do not use electrical equipment near the
photo frame. The photo frame will not work
properly in electromagnetic fields.
• Do not place heavy objects on the photo
frame.
Cleaning
Clean the photo frame with a soft dry cloth, or a
soft cloth lightly moistened with a mild
detergent solution. Do not use any type of
solvent, such as alcohol or benzine, which may
damage the finish.
On the AC adaptor
• Even if your photo frame is turned off, AC
power (house current) is still supplied to it
60 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions on duplication
About memory cards
TV programs, films, video tapes, portraits of
other people, or other materials may be
copyrighted. Unauthorized use of such
materials may infringe the provisions of the
copyright law.
“Memory Stick”
Types of “Memory Stick” that
the photo frame can use
With the photo frame, you can use the
following types of “Memory Stick”*1:
Type of “Memory Displaying
Stick”
Deleting/
Saving
“Memory Stick”*2
(Not compatible
with
OK
OK
“MagicGate”)
“Memory Stick”*2
(Compatible with
“MagicGate”)
OK*5
OK*5
“MagicGate
OK*5
OK*5
OK*5
OK*5
Memory Stick”*2
“Memory Stick
PRO”*2
“Memory Stick
PRO-HG”*2
OK*5*6
OK*5
OK*5*6
OK*5
“Memory Stick
Micro”*3 (“M2”*4)
*1
The photo frame supports FAT32. The photo
frame has been demonstrated as operable with a
“Memory Stick” with a capacity of 16 GB or less
manufactured by Sony Corporation. However, we
do not guarantee the operations of all the “Memory
Stick” media.
*2
The photo frame is equipped with a slot compatible
with both standard-size and Duo-size media.
Without a “Memory Stick Duo” adaptor, you can
use both a standard-size “Memory Stick” and the
compact-size “Memory Stick Duo”.
*3
*4
When using a “Memory Stick Micro” with the
photo frame, always insert it into an M2 adaptor.
“M2” is an abbreviation for “Memory Stick
Micro”. In this section, “M2” is used to describe a
“Memory Stick Micro”.
*5
Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
Continued
61 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
protection technology developed by Sony using
authentication and encryption.
SD memory card
*6
The photo frame does not support 8 bit parallel
data transfer.
The SD memory card slot of the photo frame
allows you to use the following:
Notes on use
• SD memory card*1
• For the latest information on the “Memory
Stick” types that the photo frame supports,
see the “Memory Stick” compatibility
information on the Sony web site:
support.html
(Select the area where you use your photo
frame, and then select “Digital Photo Frame”
from each area page.)
• Do not insert more than one “Memory Stick”
at the same time, or this may cause trouble
with the photo frame.
• If you use a “Memory Stick Micro” with the
photo frame, the “Memory Stick Micro”
needs to be inserted into an “M2” adaptor.
• If you insert a “Memory Stick Micro” into
the photo frame without an “M2” adaptor,
you may be unable to remove the “Memory
Stick Micro”.
• miniSD card, microSD card
(An adaptor is necessary.)*2
• SDHC memory card*3
• MMC standard memory card*4
We do not guarantee proper operations for all
types of SD memory cards and MMC standard
memory cards.
*1
The photo frame has been demonstrated as
operable with an SD memory card with a capacity
of 2 GB or smaller.
*2
Some commercially available card adaptors have
projected terminals on the back. This type of
adaptor may not work properly with the photo
frame.
*3
The photo frame has been demonstrated as
operable with an SDHC memory card with a
capacity of 32 GB or less.
*4
The photo frame has been demonstrated as
operable with an MMC standard memory card with
a capacity of 2 GB or less.
• If you insert a “Memory Stick Micro” into an
“M2”adaptor, and insert the “M2” adaptor
into a “Memory Stick Duo” adaptor, the
photo frame may not operate properly.
• When you format a “Memory Stick”, use the
format function of your digital camera. If
you format a “Memory Stick” with your
computer, images may not be displayed
properly.
• When you format a “Memory Stick”, all the
data including protected image files will be
erased. To avoid erasing important data by
accident, make sure to check the contents of
the “Memory Stick” before formatting.
• You cannot record, edit, or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure
to attach it to the labelling position. Be
careful that the label does not stick out.
Notes on use
Data reading/recording that requires copyright
protection cannot be performed.
xD-Picture Card
With the xD-Picture Card slot of the photo
frame, you can use an xD-Picture Card*5. Not
all the memory card operations are supported
and we do not guarantee proper operations for
all types of xD-Picture Card.
*5
The photo frame has been demonstrated as
operable with an xD-Picture Card with a
capacity of 2 GB or less.
CompactFlash card
The CompactFlash card slot of the photo frame
allows you to use the following:
62 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• CompactFlash Memory Card (Type I/
Type II) and CF+Card (Type I/Type II)-
compatible CompactFlash Card*6
• Microdrive
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
You can also use the Smart Media card by
using a commercially available CompactFlash
card adaptor*7.
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
– Humid locations or locations with
corrosive substances present
However, we do not guarantee proper
operations for all types of CompactFlash cards.
*6
Use a CompactFlash card with a power
specification of 3.3V or 3.3V/5V. You cannot use
a type for 3V or 5V only. Do not insert other types
of CompactFlash card into the photo frame’s
insertion slot. The photo frame may be damaged.
The photo frame has been demonstrated as
operable with a CompactFlash with a capacity of
32 GB or smaller.
– Locations subject to static electricity or
electrical noise
*7
When using a commercially available
CompactFlash card adaptor, refer to the operating
instructions of the adaptor you use for how to
install the card and adaptor. When using a
CompactFlash card adaptor, a write-protected card
may not work properly.
Notes on using a memory card
• When using a card, make sure to check the
correct insertion direction of the card and the
correct insertion slot.
• When inserting the memory card, it will only
insert part of the way, so do not try to force
it, as this could damage the memory card
and/or photo frame.
• Do not remove a card or turn off the photo
frame while the photo frame is reading or
writing data, or the access indicator is
flashing. Otherwise, data may be rendered
unreadable or be erased.
• We recommend that you save a backup of
important data.
• Data processed with the computer may not
be displayed with the photo frame.
• When you carry or store a card, put it in the
case supplied with it.
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bend or drop a card.
63 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximum number of pixels that can be
displayed
Specifications
8,000 (H) × 6,000 (V) pixels
File system
x Photo frame
LCD screen
FAT12/16/32,
sector size of 2,048 bytes or smaller
LCD panel:
DPF-D92: 9.0 inches, TFT active
matrix
DPF-D82: 8.0 inches, TFT active
matrix
Total number of dots:
DPF-D92: 1,152,000
(800 × 3(RGB) × 640) dots
DPF-D82: 1,080,000
(1024 × 3(RGB) × 600) dots
Image file name
DCF format, 256 characters, within 8th
hierarchy
Maximum number of files that can be
handled
9,999 files for a memory card/an external
device
Internal memory capacity*3
DPF-D92/D82: 1 GB
(Approx. 2,000 images*4 can be saved.)
When measuring media capacity, 1 GB
equals 1 billion bytes, a portion of
which is used for data management.
Display aspect ratio
15:9
Effective display area
DPF-D92: 8.6 inches
DPF-D82: 7.6 inches
Power requirements
DC IN jack, DC 12V
LCD backlight life
Power consumption
DPF-D92: 20,000 hours
DPF-D82: 30,000 hours
(before brightness of the backlight is
reduced to half)
Model
in operation mode including the
AC adaptor
DPF-D92/
D82
at the maximum load
normal mode*
11.6W
5.5W
Input/Output connectors
USB connector (TypeB, Hi-Speed USB)
USB A/Bluetooth connector
(TypeA, Hi-Speed USB)
Slots
* The definition of the normal mode is a status
which allows the performance of a slideshow using
images stored in the internal memory with the
default settings without inserting a memory card or
connecting an external device.
“Memory Stick PRO” slot
SD memory card/MMC/
xD-Picture Card slot
Operating temperature
5 °C to 35 °C (41 °F to 95 °F)
CompactFlash card/Microdrive slot
Dimensions
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF*1
[With the stand spread out]
DPF-D92:
Approx. 276 × 189 × 144.1 mm
(10 7/8 × 7 1/2 × 5 3/4 inches)
(width/height/depth)
TIFF: Exif 2.21 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows
format
RAW (preview only*2): SRF, SR2, ARW
(2.0 or lower version)
DPF-D82:
Approx. 243 × 162 × 126.6 mm
(9 5/8 × 6 1/2 × 5 inches)
[When the photo frame is hanging on the
wall]
(Some image file formats are not
compatible.)
64 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DPF-D92:
Customer support home page
The latest support information is available at the
following home page address:
Approx. 276 × 189 × 39.5 mm
(10 7/8 × 7 1/2 × 1 9/16 inches)
(width/height/depth)
DPF-D82:
Approx. 243 × 162 × 39.5 mm
(9 5/8 × 6 1/2 × 1 9/16 inches)
Mass
DPF-D92: Approx. 810 g (1 lb 12 5/8 oz)
DPF-D82: Approx. 720 g (1 lb 9 3/8 oz)
(excluding the AC adaptor)
Included accessories
x AC adaptor
The following are common specifications of
DPF-D92/D82.
Power requirements
- 100 V to 240 V, 50/60 Hz
0.48 A
Rated output voltage
12 V 1.2 A
Dimensions
Approx. 34 × 72 × 69 mm
(1 3/8 × 2 7/8 × 2 3/4 inches)
(width/height/depth)
(excluding the protruding parts)
Mass
Approx. 110 g (4 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change
without notice.
*1: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*2: RAW files are displayed as thumbnail preview.
*3: The capacity is calculated as 1 MB is equivalent to
1 000 000 bytes. The actual capacity is reduced as
files for management and applications are
included. Approximately 900 MB on DPF-D92/
D82 can be used for your actual operation.
*4: Approximate number is shown when the images
taken by 2 000 000 pixels equivalent camera are
saved. The value may vary depending on the
shooting condition.
65 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|