Even if the alarm setting for iPod is complete, if
you turn the iPod touch/iPhone power off after
inserting the iPod touch/iPhone into the unit,
the alarm will be the buzzer.
To deactivate the App’s link function: Remove
your iPod/iPhone from the dock connector.
Press (to enter the iPod function), and then
press and hold VOLUME – and
simultaneously for at least 2 seconds. (“OFF”
appears in the display to show that the App’s
link function has been deactivated.)
Repeat the above steps to activate the function.
(“ON” appears in the display to show that the
App’s link function has been activated.)
3 Press PRESET + or – to select the preset
To play back
To change the sleep timer
setting
4-286-722-11(1)
Remote commander
number, then press DSPL/ENT on the
1 Set your iPod on the dock connector.
unit.
Before using the supplied remote for the first
time, remove the insulation film.
Aim the remote at the (Remote sensor) of the
unit.
The dock connector can be tilted slightly.
You can press SLEEP repeatedly to select the
desired sleep timer setting, even after the sleep
timer has been activated.
Example: The following displays appear
when you preset FM 89.8 MHz to
preset number 1 for FM.
To set the radio alarm
Perform steps 1 to 8 in “To set the alarm.”
1
To deactivate the sleep timer
2 Press ALARM SET A or B to select
Press SLEEP repeatedly to set the sleep timer to
Personal Audio Docking System
radio band (“FM” or “AM”).
“OFF” in step 2.
Preset number flashes in the display.
3 Press TIME SET + or – to select the
Additional Information
Troubleshooting
desired preset number corresponding the
Connecting optional
components
To listen to sound
bands or “– –.”
Reference Guide US
“– –” is the last station received.
2 Press .
4 Press ALARM SET A or B.
Should any problem persist after you have made
the following checks, consult your nearest Sony
dealer.
The iPod begins to play back.
You can operate the connected iPod via this
unit or the iPod itself.
The volume level flashes in the display.
5 Press TIME SET + or – to adjust the
1 Firmly connect the line output jack of a
portable digital music player (or other
component) to the AUDIO IN jack on the
back of the unit using a suitable
The display shows the frequency for about
10 seconds, and then returns to the current
time.
volume.
3 Adjust the volume using VOLUME + or –
The clock flashes “AM 12:00” due to a power
interruption.
6 Press ALARM SET A or B.
(VOL + or – on the remote).
The setting is entered.
Notes
The battery is low. Replace the battery. Remove
the old battery and install a new one.
Supporter
To remove an iPod
7 If “A” or “B” does not appear in the
To preset another station, repeat these steps.
To cancel the preset number setting, press
connecting cable.
When placing or removing the iPod, hold it at the
same angle as the dock connector on the unit. Do
not pull the iPod forward too far.
display, press ALARM SET A or B
The alarm of radio, iPod or buzzer does not
sound at the preset alarm time.
2 Press AUDIO IN to display “AUDIO IN.”
3 Turn the connected component on.
4 Play the connected component.
The sound from the connected component is
output from the speakers of this unit.
MODE again.
again.
If you store another station with the same
preset number, the previously stored station
will be replaced.
Check that alarm “A” or alarm “B” is properly
displayed.
The radio will turn on at the set time.
Power cord
To set the buzzer alarm
Dream Machine is a trademark of Sony Corporation.
Auto Time Set is a trademark of Sony Corporation.
The alarm of radio or iPod is activated but no
sound comes on at the preset alarm time.
The VOL + and buttons have a tactile dot.
1
Perform steps 1 to 8 in “To set the alarm.”
To tune in to a preset station
1 Follow steps 1 to 2 in “Manual tuning”
and select the AM or FM band.
2 Press PRESET + or – to select the desired
preset number.
OFF
Check the alarm volume setting.
5
Adjust the volume using VOLUME + or –
(VOL + or – on the remote).
Remote sensor
2 Press ALARM SET A or B to select
Terminate the current function and stop
“BUZZER” alarm mode.
There is no sound from the iPod.
playback.
The setting is entered.
Make sure the iPod is securely connected.
Adjust the VOLUME +/– (VOL +/– on the
remote).
FM wire antenna
Stop a currently sounding alarm/snooze timer.
To return to the radio
3 If “A” or “B” does not appear in the
(Play/Pause)
Press RADIO BAND.
display, press ALARM SET A or B
Start playing the iPod. Press again to pause/
The preset number followed by then the
frequency of the last station appears in the display.
3 Adjust the volume using VOLUME + or –
The iPod cannot be operated with this unit.
Make sure the iPod is securely connected.
again.
resume playback.
(VOL + or – on the remote).
The buzzer will sound at the set time.
Notes
Press and hold to turn off the iPod.
An iPod in a case or cover can be set in this
Note
The iPod cannot be charged.
Make sure the iPod is securely connected.
To return to the iPod
(Forward)
–Auto preset tuning
unit. However, if the case or cover interferes
with connection, remove the case or cover
before setting the iPod on the dock connector.
The volume cannot be set for the buzzer alarm.
Press .
Go to the next track.
1 Follow steps 1 to 2 in “Manual tuning”
When daylight saving time (summer time)
begins, the clock does not employ the
daylight saving time (summer time)
automatically.
Press and hold while listening to the sound to
To confirm an alarm time
setting
and select the AM or FM band.
To stop listening
locate a desired point.
When placing or removing the iPod, hold the
iPod at the same angle as that of the connector
on this unit, and do not twist or bend the iPod
as it may result in connector damage.
Remove the iPod when transporting it,
otherwise a malfunction may result.
Press and hold in pause while observing the
No Power No Problem is a trademark of Sony Corporation.
2 Press and hold RADIO BAND until “AP”
flashes in the display.
3 Press DSPL/ENT on the unit.
The unit automatically presets the available
channels in order.
Press OFF/ALARM RESET (OFF on the remote),
Press TIME SET + or –. The setting will be
display on iPod to locate a desired point.
and stop playback on the connected component.
Make sure the clock is set correctly.
displayed for about 4 seconds.
Notes
Printed in China
(Backward)
©2011 Sony Corporation
Press and hold CLOCK and SNOOZE/
BRIGHTNESS on the unit simultaneously for at
least 2 seconds to activate the Auto DST/
summer time function.
The necessary type of audio connecting cable
depends on the optional component. Make sure
to use the correct type of cable.
Go back to the previous track. During
To change an alarm setting
The VOLUME + and buttons have a tactile dot.
playback, this operation returns to the
beginning of the current track. To go back to
the previous track, press twice.
When placing or removing the iPod, hold the
unit securely.
Press and hold TIME SET + for at least 2 seconds
to move the alarm time forwards. Press and hold
TIME SET – for at least 2 seconds to move the
alarm time back.
Tip
ICF-CS15iP
If the volume level is low, adjust the volume of
the unit first. If the volume is still too low,
adjust the volume of the connected component.
Disconnect the audio connecting cable when it
is not in use.
When you listen to the radio with optional
component connected, turn off the connected
component to prevent noise. If noise occurs,
even when the component is turned off,
disconnect and place the optional component
away from the unit.
To stop auto preset tuning, press RADIO BAND.
If the battery of your iPod is extremely low,
charge it for a while before operation.
If your iPod cannot reach the supporter located
in front of the unit, attach the supplied cushion
below the supporter.
Press and hold while listening to the sound to
locate a desired point.
Press and hold in pause while observing the
display on iPod to locate a desired point.
To display the preset number and
When you release the button, the changed time
will flash for about 2 seconds. To change the
alarm time again, press TIME SET + or – within
these 2 seconds, otherwise the setting change will
be fixed as displayed.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 6 ohm loads both channels driven, from
150 Hz - 10,000 Hz; rated 3 watts per channel
minimum RMS power, with no more than 10%
total harmonic distortion.
frequency of the current station
Press DSPL/ENT on the unit once for the preset
number, and press it again for the frequency.
If you press DSPL/ENT on the unit once only, the
display shows the preset number for about
2 seconds, then changes to the frequency.
After a few moments, the display returns to the
current time.
3 Press TIME SET + or – repeatedly to
Important Safety
Operations
select the number as follows:
If the iPod is already playing when set onto the
unit, the sound from the iPod will be output
from the unit speakers, even if the unit was
playing sound from another function.
Sony cannot accept responsibility in the event
that data recorded to an iPod is lost or damaged
when using an iPod connected to this unit.
For details of environmental conditions for
operating your iPod, check the website of Apple
Inc.
Instructions
(Up)/ (Down)
1) Read these instructions.
Select a menu item or track for playback.
Area number Time zone
2) Keep these instructions.
English
Power source
No Power No Problem system
This unit contains a CR2032 battery as a backup
power source to keep the clock and the alarm
operating during a power interruption.
MENU
1
Atlantic standard Time
Eastern standard Time
3) Heed all warnings.
To doze for a few more
minutes
Go back to the previous menu.
Press and hold to go back to the main menu.
4) Follow all instructions.
2
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
(default setting)
Press SNOOZE/BRIGHTNESS on the unit.
The sound turns off but will automatically come
on again after about 10 minutes.
Time display
Owner’s Record
ENTER
7) Do not block any ventilation openings.
Install in accordance with the manufacturer’s
instructions.
e model number and the serial number are located on the
bottom.
To improve reception
12-hour system
3
4
5
6
7
Central standard Time
Mountain standard Time
Pacific standard Time
Yukon standard Time
Hawaiian standard Time
Execute the selected menu item or begin
playback.
Other useful functions
FM: Extend the FM wire antenna fully to increase
reception sensitivity.
iPod
Record the serial number in the space provided below. Refer
to them whenever you call upon your Sony dealer regarding
this product.
You can change the snooze time by pressing
SNOOZE/BRIGHTNESS on the unit repeatedly
within 4 seconds.
The maximum length of the snooze time is
60 minutes.
DC out: 5 V
MAX: 1 A
When to replace the battery
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
SOUND
AM: Connect the supplied AM loop antenna to
the unit. Rotate the antenna horizontally for
optimum reception.
To enjoy the bass or
When the battery becomes weak, “” appears in
the display.
Select the desired sound effect(s). (For details,
see “To enjoy the bass or expansion sound
effect.”)
Radio
Frequency range
expansion sound effect
Model No. ICF-CS15iP
Playing the radio
If a power interruption occurs while the battery is
weak, the current time and alarm will be erased.
Replace the battery with a Sony CR2032 lithium
battery. Use of another battery may cause a fire or
explosion.
Four levels of sound effect are available by
pressing SOUND.
Serial No.________________________________
9) Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
plug has two blades with one wider than the
other. A grounding type plug has two blades
and a third grounding prong. The wide blade
or the third prong are provided for your safety.
If the provided plug does not fit into your
outlet, consult an electrician for replacement
of the obsolete outlet.
10)Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
11)Only use attachments/accessories specified by
the manufacturer.
Notes on radio reception
10
20
30
Band Frequency
Channel step
VOL +/− (Volume plus/minus)
4 Press DSPL/ENT to set.
To connect the AM loop
antenna
Each time you press the button, the sound effect
changes as follows:
Do not place the AM loop antenna near the
power supply unit, the unit or other AV
equipment during use, as noise may result.
Keep digital music players or mobile phones
away from the AM loop antenna or the FM
antenna, as this may lead to reception
interference.
When you are listening to the radio with an
iPhone connected to the unit, interference with
radio reception may occur.
Adjust the volume.
60
50
40
FM
87.5 MHz - 108 MHz 0.1 MHz
Notes
For customers in the USA
Please register this product on line at
To cancel the time zone setting, press MODE.
Though the clock is correctly set at the factory,
discrepancies may arise during transport or
storage. If necessary, set the clock to the correct
time by referring to “To set the clock manually.”
“MEGA BASS”: Provides high quality bass sound.
“MEGA Xpand”: Extends the sound field width.
“MEGA BASS” and “MEGA Xpand”: Enables
both the above effects.
AM
530 kHz - 1 710 kHz
10 kHz
RADIO BAND
To stop the snooze timer, press OFF/ALARM
RESET (OFF on the remote).
Proper registration will enable us to send you
periodic mailings about new products, services,
and other important announcements. Registering
your product will also allow us to contact you
in the unlikely event that the product needs
adjustment or modification. ank you.
The shape and length of the antenna is designed
to receive AM signals. Do not dismantle or roll up
the antenna.
Note
Activate the radio and select a band.
General
Speaker
If “AM 12:00” flashes in the display when the
PRESET +/−
unit is connected to an AC outlet for the first
time, the battery may be weak. In this case,
consult your nearest Sony dealer.
To stop the alarm
Approx. 5.7 cm (2 1/4 inches) dia. 6 Ω
Select the preset number or preset station. (For
details, see “Playing the radio.”)
To return to standard sound, press the button
until the display(s) disappear.
1 Remove only the loop part from the
Press OFF/ALARM RESET (OFF on the remote)
to turn off the alarm.
Input
When daylight saving time (summer
plastic stand.
AUDIO IN jack (ø 3.5 mm stereo minijack)
TUNE +/−
time) begins
To set the brightness of the
display
To replace the battery
The alarm will sound again at the same time the
next day.
2 Set up the AM loop antenna.
(Refer to the Startup Guide bundled with this
Reference Guide.)
3 Insert the AM antenna terminal in the
AM ANTENNA jack on the rear of the
unit.
To adjust the AM loop antenna
Find a place and an orientation that provide good
reception.
Power output
3.5 W + 3.5 W (at 10% harmonic distortion)
Tune into a station when the radio is on.
Press and hold to scan AM or FM stations.
This model automatically adjusts for daylight
saving time (summer time).
When you are listening to the radio while
charging an iPod, interference with radio
reception may occur.
1 Keep the AC plug connected to the AC
outlet, remove the screw of the battery
compartment at the bottom of the unit,
and open the lid (see Fig. ).
2 Remove the old battery and insert a new
one in the battery compartment with the
side facing up (see Fig. ).
WARNING
To reduce the risk of fire or electric
shock, do not expose this apparatus to
rain or moisture.
To reduce the risk of fire, do not cover the
ventilation of the apparatus with newspapers,
tablecloths, curtains, etc. And do not place lighted
candles on the apparatus.
Power requirements
Four levels of brightness are available by pressing
“
” is displayed from the beginning of daylight
To deactivate the alarm
AUDIO IN
120 V AC, 60 Hz
SNOOZE/BRIGHTNESS on the unit.
saving time (summer time) and disappears at the
end of the daylight saving time (summer time)
automatically.
Activate the AUDIO IN function when an
optional component is connected. (For details,
see “Connecting optional components.”)
12)Use only with the cart, stand, tripod, bracket,
or table specified by the manufacturer, or sold
with the apparatus. When a cart is used, use
caution when moving the cart/apparatus
combination to avoid injury from tip-over.
For clock back up: 3V DC, CR2032 battery (1)
Press ALARM ON/OFF A or B to turn off the
Tip
alarm A or B indicator from the display.
If the FM broadcast is noisy, press MODE on
Dimensions
Approx. 290 mm × 165 mm × 145 mm (w/h/d)
(11 1/2 inches × 6 1/2 inches × 5 3/4 inches)
including projecting parts and controls
the unit until “MONO” appears in the display,
the radio will play in monaural and the sound
will become clearer.
Daylight saving time (summer time) begins at:
Even if brightness level is set to OFF, it will
change to Low while the alarm is occurring.
To activate the alarm
SLEEP
2:00 AM on the second Sunday of March.
Set the sleep timer. (For details, see “Setting the
sleep timer.”)
Press ALARM ON/OFF A or B to turn on the
Standard time begins at: 2:00 AM on the first
alarm A or B indicator in the display.
Mass
About App
Sunday of November.
3 Replace the battery compartment lid and
Approx. 1.65 kg (3 lb 7 oz) including power
To reduce the risk of fire or electric shock, do not
expose this apparatus to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the apparatus.
Tip
Notes
Dedicated Dock App for iPod/iPhone available at
Apple App Store.
supply unit
Note
Some operations may differ or may not be
tighten the screw.
Adjust the direction of the AM loop antenna for
When alarm is set as iPod, only the buzzer
Setting the alarm
To cancel Auto DST/summer time adjustment
during the daylight saving time (summer
time) period
Supplied accessories
Remote commander (1)
AM loop antenna (1)
Cushion (1)
the best AM broadcast sound.
4 Press , RADIO BAND, AUDIO IN or
SNOOZE/BRIGHTNESS on the unit to
turn “” off in the display.
alarm will sound if there is no iPod on the dock
connector, music is not stored in the iPod, or
the iPod touch/iPhone is turned off.
Search for “D-Sappli” and download the free App
to find out more about the functions.
13)Unplug this apparatus during lightning storms
or when unused for long periods of time.
14)Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
For the state of California USA only
Perchlorate Material –special handling may apply, see
Perchlorate Material: Lithium battery contains
perchlorate
available on certain models of iPod.
This unit is equipped with 3 alarm modes—iPod,
radio and buzzer. Before setting the alarm, make
sure to set the clock by this unit (see “To set the
clock for the first time”).
To remove the AM loop antenna
Pull the AM antenna terminal while pushing up
the terminal clamp.
Do not install the appliance in a confined space,
such as a bookcase or built-in cabinet.
The Auto DST/summer time adjustment can be
When to replace the battery
Notes
The alarm function works as usual on the first
and last day of daylight saving time (summer
time). As a result, if the Auto DST/summer
time adjustment is set and the alarm is set at a
time skipped when the daylight saving time
begins, the alarm will sound; if the alarm is set
to a time that overlaps when daylight saving
time ends, the alarm will sound twice.
If the same alarm time is set for both alarm A
and B, alarm A takes priority.
canceled.
If the App to link with this unit is not
downloaded to your iPod/iPhone, a pop-up
message prompting you to download D-Sappli
may appear repeatedly.
Deactivate the App’s link function to stop the
pop-up message.
With normal use, the battery (CR2025) should
last for about 6 months. When the remote no
longer operates the unit, replace the battery with a
new one.
Design and specifications are subject to change
without notice.
Note
Press and hold CLOCK and SNOOZE/
BRIGHTNESS on the unit at the same time for at
least 2 seconds while the clock is displayed.
” and “OFF” appear in the display to show that
Auto DST/summer time adjustment has been
canceled. The display returns to the clock.
Do not expose the batteries (battery pack or
batteries installed) to excessive heat such as
sunshine, fire or the like for a long time.
When you replace the battery, do not
To set the alarm
1 Press and hold ALARM SET A or B.
“WAKE UP” appears and the hour flashes in
the display.
disconnect the plug from the AC outlet.
Otherwise, the current date, current time,
alarm and station presets will be erased.
“
As the main plug is used to disconnect the unit
from the mains, connect the unit to an easily
accessible AC outlet. Should you notice an
abnormality in the unit, disconnect the main plug
from the AC outlet immediately.
the side facing up
2 Press TIME SET + or – repeatedly until
Notes
Changes to Auto DST/summer time adjustment
by the unit (see above) are subject to
the desired hour appears.
To cycle the hour rapidly, press and hold TIME
SET + or –.
If no operation is performed while the alarm is
occurring, the alarm will stop after about
60 minutes.
The unit is not disconnected from the AC power
source (mains) as long as it is connected to the
wall outlet, even if the unit itself has been turned
off.
circumstances and laws in each country/region.
Should this interfere with desired adjustment,
cancel the Auto DST/summer time adjustment
and set the DST display manually as necessary.
Customers living in a country/region that does
not use daylight saving time (summer time)
must cancel Auto DST/summer time
This warranty is valid only in the United States.
3 Press ALARM SET A or B.
–Manual tuning
The minute flashes.
Note
Note on the alarm in the event of a power
interruption
In the event of a power interruption, the buzzer
alarm will last about 5 minutes if the battery is not
weak. However, certain functions will be affected
as follows:
The nameplate and important information
concerning safety are located on the bottom
exterior.
4 Repeat step 2 to set the minute.
If you are not going to use the remote for a long
time, remove the battery to avoid any damage
that may be caused by leakage and corrosion.
1
Press RADIO BAND to turn on the radio.
Precautions
5 Press ALARM SET A or B.
2 Press RADIO BAND repeatedly to select
To disconnect AC power, grasp the plug itself,
not the cord.
Since a strong magnet is used for the speaker,
keep credit cards using magnetic coding or
spring-wound watches, CRT-based TVs, or
projectors, etc., away from the unit to prevent
possible damage from the magnet.
The days of the week flash.
the desired band.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
adjustment before using the unit.
6 Repeat step 2 to set the days of the week.
You can select the days from the following
three options by pressing TIME SET + or –:
Every day: MON TUE WED THU FRI SAT
SUN
Each time you press the button, the radio
band toggles between AM and FM as follows:
Reset button
To activate Auto DST/summer time adjustment
again, press and hold CLOCK and SNOOZE/
BRIGHTNESS on the unit at the same time for
at least 2 seconds.
The backlight will not light up.
Playing an iPod
FM
AM
If the alarm mode is set to iPod or radio, it will
change to buzzer automatically.
CAUTION
Compatible iPod/iPhone
models
If OFF/ALARM RESET is not pressed, the alarm
will sound for about 5 minutes.
“
” and “On” appear in the display to show that
Auto DST/summer time adjustment has been
activated. The display returns to the clock.
Do not leave the unit in a location near a heat
source such as a radiator or airduct, or in a
place subject to direct sunlight, excessive dust,
mechanical vibration, or shock.
Allow adequate air circulation to prevent
internal heat build-up. Do not place the unit on
a surface (a rug, a blanket, etc.) or near
materials (a curtain) which might block the
ventilation holes.
Week day: MON TUE WED THU FRI
Week end: SAT SUN
Danger of explosion if battery is incorrectly
replaced. Replace only with the same type.
3 Press TUNE + or – repeatedly to tune to
the desired station.
CR2032
If “” appears in the display, the alarm will not
sound in the event of a power interruption.
Replace the battery if “” appears.
The snooze function cannot be set during a
power interruption.
The compatible iPod/iPhone models are as
follows.
7 Press ALARM SET A or B.
4 Adjust the volume using VOLUME + or –
NOTE
The alarm mode setting is entered.
To set the clock manually
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning
the equipment off and on, the user is encouraged
to try to correct the interference by one or more
Update software of your iPod/iPhone to the latest
version before using it with this unit.
(VOL + or – on the remote).
To turn off the radio, press OFF/ALARM
RESET (OFF on the remote).
8 Press TIME SET + or – repeatedly until
To change the clock setting manually, operate the
unit as follows.
the desired alarm mode flashes.
You can choose one of 4 settings: “iPod,” “FM,”
“AM” or “BUZZER.” Set the alarm mode as
follows:
During a power interruption, each alarm will
sound at the set time only once.
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
iPod nano (6th generation)*
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod classic
1 Plug in the unit.
2 Press and hold CLOCK until the year
–Scan tuning
Should any solid object or liquid fall into the
unit, unplug the unit and have it checked by
qualified personnel before operating it any
further.
To reset the unit
flashes in the display.
The unit automatically scans for AM or FM
stations.
– iPod: see “ To set the alarm as iPod.”
– FM or AM: see “ To set the radio alarm.”
– BUZZER: see “ To set the buzzer alarm.”
Press the reset button with a pointed object if the
unit fails to function properly. The current time,
alarm and station presets, etc., will revert to their
factory presets (see Fig. ).
Setting the sleep timer
3 Press TIME SET + or – repeatedly to set
the year, and then press CLOCK.
4 Repeat step 3 to set the month, day, hour
During a thunderstorm, do not touch the
antenna (aerial) and plug.
You can fall asleep to music, etc., using the sleep
timer. The unit stops playback or radio
automatically after a preset duration.
1 Follow steps 1 to 2 in “Manual tuning”
To set the alarm as iPod
and select the AM or FM band.
Do not touch the unit with wet hands.
Do not place the unit anywhere near water.
and minute.
iPhone 4
2 Press and hold TUNE + or –.
1
Perform steps 1 to 8 in “To set the alarm.”
To charge your iPod
The seconds start incrementing from zero.
iPhone 3GS
1 Press SLEEP while the unit is turned on.
“SLEEP” appears and the sleep time flashes in
the display.
+ : scans upward through the frequency bands.
2 Press ALARM SET A or B to select
iPhone 3G
NOTES ON LITHIUM BATTERY
You can use the unit as a battery charger.
Charging begins when the iPod is connected to
the unit.
Notes
–
:
scans downwards through the frequency
Wipe the battery with a dry cloth to assure a
alarm mode for “iPod.”
If you do not press any button for about
bands.
* The iPod nano 6th generation cannot be
controlled by the remote when the command of
“MENU,” “,” “,” and “ENTER” is pressed.
good contact.
The volume level flashes in the display.
1 minute while setting the clock, the clock
setting will be canceled.
Scanning starts from the currently-tuned
frequency. When a station is received,
scanning stops.
2 Press SLEEP to set the sleep timer
Be sure to observe the correct polarity when
installing the battery.
Do not hold the battery with metallic tweezers,
otherwise a short-circuit may occur.
The charging status appears in the display on
iPod. For details, see the user’s guide of your iPod.
of the following measures:
3 Press TIME SET + or – to adjust the
duration.
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment
and receiver.
A 100-year calendar (2011 - 2110) is installed in
volume.
Each time you press SLEEP, the duration (in
minutes) changes as follows:
On copyrights
the unit. When the date is set, the day of the
week is automatically displayed.
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
“Made for iPod,” and “Made for iPhone” mean
that an electronic accessory has been designed to
connect specifically to iPod or iPhone,
respectively, and has been certified by the
developer to meet Apple performance standards.
Apple is not responsible for the operation of this
device or its compliance with safety and
regulatory standards. Please note that the use of
this accessory with iPod or iPhone may affect
wireless performance.
3 Adjust the volume using VOLUME + or –
4 Press ALARM SET A or B.
— Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
(VOL + or – on the remote).
90
60
30
15
The setting is entered.
Note
MON = Monday, TUE = Tuesday,
Setting the clock
In the Reference Guide, “iPod” is used as a
5 If “A” or “B” does not appear in the
OFF
WED = Wednesday, THU = Thursday,
FRI = Friday, SAT = Saturday, SUN = Sunday
–Preset tuning
general reference to functions on an iPod or
iPhone, unless otherwise specified by the text
or illustrations.
display, press ALARM SET A or B
— Consult the dealer or an experienced radio/TV
technician for help.
The display returns to current time for about
4 seconds after you have finished the duration
setting and released SLEEP, and then the sleep
timer starts.
The unit plays for the duration you set, and
then stops.
You can preset up to 20 FM stations and 10 AM
stations.
To set the clock for the first
time
again.
To display the year and date
The iPod will sound at the set time.
During clock display, press CLOCK on the unit
once for the date, and press it again for the year.
After a few seconds, the display will change back
to the current time automatically.
WARNING
If you have any questions or problems concerning
your unit, please consult your nearest Sony dealer.
When using an iPod touch/iPhone
To preset a station
This unit is preset to the current EST (Eastern
Standard Time) at the factory, and is powered by a
backup battery. All you need to do the first time is
just plug it in and select your time zone by this
unit.
Replace the battery for the clock backup with a
Sony CR2032 lithium battery, and the battery
for the remote commander with a Sony CR2025
lithium battery. Use of another battery may
present a risk of fire or explosion.
To wake up to music stored in an iPod touch/
1 Follow steps 1 to 4 in “Manual tuning”
and manually tune into the station you
wish to preset.
iPhone, connect the iPod touch/iPhone to the
unit first, follow the steps above to set alarm
time, and then select the music function.
To turn off the unit before
the preset time
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Dispose of used battery promptly. Keep away
from children.
2 Press and hold MODE on the unit for at
1 Plug in the unit.
least 2 seconds.
Note
The current EST (Eastern Standard Time)
appears in the display.
This unit is not specified for use with an iPad
and malfunction may result if used as such.
,
Press OFF/ALARM RESET (OFF on the remote).
2 Press and hold MODE for at least
2 seconds.
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.
Area number “2” flashes in the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
|