Sony Home Theater System CMT CP10 User Manual

4-239-402-11 (2)  
Micro Hi-Fi  
Component  
System  
Operating Instructions  
Owner’s Record  
The model and serial numbers are located at the rear. Record the serial number in the  
space provided below. Refer to them whenever you call upon your Sony dealer  
regarding this product.  
Model No.  
Serial No.  
CMT-CP101  
© 2002 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
List of Button Locations and  
Reference Pages  
Sound Adjustment  
Adjusting the sound ............................. 15  
Main unit ............................................... 4  
Remote Control ..................................... 5  
Display  
Using the display ................................. 16  
Getting Started  
Hooking up the system .......................... 6  
Inserting two size-AA (R6) batteries into  
the remote control ........................... 7  
Setting the clock .................................... 7  
Other Features  
Falling asleep to music  
— Sleep Timer .............................. 16  
Waking up to music  
— Daily Timer .............................. 16  
CD  
Optional Components  
Loading the CD ..................................... 8  
Playing the CD  
Hooking up optional components........ 18  
Listening to audio from a connected  
component ..................................... 18  
Recording on a connected component ... 18  
–– Normal Play/Shuffle Play/Repeat Play ....  
8
Programming the CD tracks  
–– Program Play .............................. 9  
Tuner  
Troubleshooting  
Presetting radio stations......................... 9  
Listening to the radio........................... 11  
Using the Radio Data System (RDS)* .... 11  
Problems and remedies ........................ 19  
Additional Information  
Precautions .......................................... 21  
Specifications ...................................... 22  
Tape  
Loading a tape ..................................... 12  
Playing a tape ...................................... 12  
* European model only  
Recording to a tape  
–– CD Synchro Recording/  
Recording Manually/Program Edit ... 13  
Timer-recording radio programs ......... 14  
3GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
List of Button Locations and Reference Pages  
Illustration number  
How to use this page  
r
Use this page to find the location of buttons and other  
parts of the system that are mentioned in the text.  
PLAY MODE qg (9, 13, 14)  
R
R
Name of button/part Reference page  
Main unit  
BUTTON DESCRIPTIONS  
ALPHABETICAL ORDER  
A – R  
BASS wd (15)  
T – V  
@/1 (power) 1 (7, 10, 15, 17)  
TAPE EJECT Z6 (12)  
TAPE z REC 5 (13)  
TAPE Y 8 (12–14)  
TAPE X 0 (12–14)  
TAPE x 7 (12–14, 20)  
TAPE m/M 9 (12)  
TREBLE ws (15)  
TUNER BAND qs (9, 10, 20)  
TUNING MODE qf (9–11)  
TUNING +/– qd (9–11)  
VOLUME 4 (17)  
CD EJECT Z qg (8)  
CD SYNC qa (13, 14)  
CD uqj (8, 9)  
CD xqh (8–10, 18, 20)  
CD ./> qk (8, 9)  
CD m/M qk (8)  
DSG 3 (15)  
FUNCTION 2 (8–10, 12, 13, 18)  
PHONES jack wf  
PLAY MODE w; (8, 9, 14)  
Remote sensor wa  
REPEAT ql (8)  
1
2
3
45 6 7  
Z
x
Y
8
m
M
X
9
0
qa  
z
?/1  
qs  
qd  
qf  
qg  
qh  
Z
x
u
qj  
qk  
m
M
.
>
wfwd ws wa  
w;ql  
4GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote Control  
ALPHABETICAL ORDER  
A – M  
BUTTON DESCRIPTIONS  
X 4 (8, 1214)  
x5 (8, 9, 1214)  
S – V  
./> 6 (710, 14, 15, 17)  
m/M 7 (8, 1012)  
@/1 (power) 3 (7, 15, 17)  
z REC 8 (13)  
CD REPEAT qk (8)  
CD N ws (8, 9)  
DIR MODE ql (1214)  
DISPLAY 2 (11, 16)  
DSG 1 (15)  
ENTER qd (7, 10, 15, 17)  
FM MODE 9 (11)  
FUNCTION qj (810, 12, 13,  
18)  
SLEEP qf (16)  
TAPE Y w; (1214)  
TIMER SELECT qs (15, 17)  
TIMER SET qg (7, 14, 17)  
TUNER/BAND wa (10)  
TUNING MODE/PLAY MODE  
q; (8, 9, 10, 11, 14)  
VOL +/qa (17)  
MEMORY qh (10)  
1 2 3  
4
5
ws  
wa  
w;  
ql  
6
7
8
9
qk  
qj  
qh  
0
qa  
qg  
qf  
qdqs  
5GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Started  
Hooking up the system  
Follow steps 1 through 4 of the procedure below to hook up your system using the supplied cords  
and accessories.  
AM loop antenna  
FM antenna  
Right speaker  
Left speaker  
2
1
3
4
1 Connect the speakers.  
Connect the right and left speaker cords to  
the SPEAKER terminals as shown below.  
3
3
Jack type A  
L
Solid (3)  
Extend the FM wire AM loop  
antenna horizontally antenna  
#
R
ANTENNA  
#
Stripe (#)  
FM75  
U
M
A
Insert this portion  
Jack type B  
2 Connect the FM and AM antennas.  
Set the AM loop antenna up before  
connecting it.  
Extend the FM  
wire antenna  
horizontally  
antenna  
AM loop  
ANTENNA  
FM75  
U
U
M
A
6GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 For models with a voltage selector, set  
VOLTAGE SELECTOR to the local  
power line voltage.  
Setting the clock  
1 Turn on the system.  
110V-120V  
2 Press TIMER SET on the remote.  
3 Press ./> on the remote  
220V-240V  
VOLTAGE  
repeatedly to set the hour.  
4 Press ENTER on the remote.  
SELECTOR  
The minute indication flashes.  
4 Connect the power cord to a wall outlet.  
If the plug does not fit the wall socket,  
detach the supplied plug adaptor (only for  
models equipped with an adaptor).  
5 Press ./> on the remote  
repeatedly to set the minute.  
6 Press ENTER on the remote.  
The clock will begin operating.  
To turn on the system, press @/1.  
To adjust the clock  
1 Press TIMER SET on the remote.  
2 Press . or > on the remote to select  
SET CLOCK, then press ENTER on the  
remote.  
Inserting two size-AA (R6)  
batteries into the remote  
control  
3 Do the same procedures as step 3 to 6  
above.  
e
E
E
e
Tip  
When the remote no longer operates the system,  
replace both batteries with new ones.  
Note  
If you do not use the remote for a long period of time,  
remove the batteries to prevent possible damage from  
battery leakage and corrosion.  
7GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD  
2 Press PLAY MODE (or TUNING MODE/  
PLAY MODE on the remote) repeatedly  
until the mode you want appears in the  
display.  
Loading the CD  
1 Press CD EJECT Z.  
To play  
Select  
The disc tray slides out.  
The CD in original order.  
No display  
SHUFFLE  
The tracks on the CD in random  
order.  
2 Load a CD onto the disc tray.  
The tracks on the CD in any  
order that you want (see  
Programming the CD trackson  
page 9).  
PGM  
Load with the  
label side up.  
When you play  
a CD single  
(8 cm CD),  
load it onto the  
inner circle of  
the tray.  
>
3 Press CD u (or CD N on the remote).  
Other Operations  
To  
Do this  
3 Press CD EJECT Z again to close the  
Stop playback  
Pause  
Press CD x.  
disc tray.  
Press CD u (or X on the  
remote). Press again to  
resume playback.  
Playing the CD  
Select a track  
During playback or pause,  
press CD ./>  
repeatedly until you find the  
desired track.  
–– Normal Play/Shuffle Play/Repeat  
Play  
This system lets you play CDs in different play  
modes.  
Find a point in a track  
Remove the CD  
During playback, press and  
hold down CD m/M  
until you find the desired  
point.  
Press CD EJECT Z.  
1 005  
Play repeatedly  
(Repeat Play)  
Press REPEAT repeatedly  
during playback until  
REPEATor  
REPEAT 1appears in the  
display.  
Track number  
Playing time  
1 Press FUNCTION repeatedly until “CD”  
REPEAT: For all the tracks  
on the CD.  
appears in the display.  
REPEAT 1: For only the  
currently playing track.  
To cancel playing  
repeatedly, press REPEAT  
repeatedly until REPEAT”  
and REPEAT 1disappear  
from the display.  
8GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tuner  
Programming the CD  
tracks  
Presetting radio stations  
You can preset up to 20 FM stations and 10  
AM stations. You can then tune in any of those  
stations simply by selecting the corresponding  
preset number.  
–– Program Play  
You can make a program of up to 24 tracks on  
a CD in any order that you want.  
There are two ways to store the station presets.  
1 Press FUNCTION repeatedly until “CD”  
To  
Method  
appears in the display.  
Automatically tune  
all of the stations  
that can be received  
in your area and then  
store them manually  
Automatic Tuning Preset  
2 Press PLAY MODE (or TUNING MODE/  
PLAY MODE on the remote) repeatedly  
until “PGM” appears in the display.  
3 Press CD ./> repeatedly until the  
desired track number appears in the  
display.  
Manually tune and store  
the radio frequency of  
your favorite stations  
Manual Tuning Preset  
PGM  
3 243  
Setting presets through  
automatic tuning  
Total playing time  
Selected track  
number  
1 Press FUNCTION repeatedly until  
“TUNER” appears in the display.  
4 Press PLAY MODE (or TUNING MODE/  
PLAY MODE on the remote).  
2 Press TUNER BAND to select FM or  
The selected track is programmed.  
AM.  
The selection number appears in the  
display.  
3 Press TUNING MODE (or TUNING  
MODE/PLAY MODE on the remote)  
repeatedly until “AUTO” appears in the  
display.  
5 To program additional tracks, repeat  
steps 3 and 4.  
4 Press TUNING +/– (or m/M on the  
6 Press CD u (or CD N on the remote).  
remote).  
The frequency changes as the system scans  
for a station. Scanning stops automatically  
when a station is tuned in. At that time,  
TUNEDand STEREO(for stereo  
program only) appear.  
To  
Do this  
Cancel Program Play  
Press PLAY MODE (or  
TUNING MODE/PLAY  
MODE on the remote)  
repeatedly until PGM”  
disappears from the display.  
If “TUNED” does not appear and the  
scanning does not stop  
Add a track to the end Do steps 3 and 4 with  
of the program  
Program Play stopped.  
Set the frequency of the desired radio  
station as described in steps 3 through 7 of  
Setting presets through manual tuning.  
Erase the entire  
program  
Press CD x with Program  
Play stopped.  
Tips  
continued  
The program you made remains after Program Play  
finishes. To play the program again, switch the  
function to CD, and then press CD u (or CD N  
on the remote).  
• “--.--appears in the display when the total program  
time exceeds 100 minutes.  
9GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6 Press ./> on the remote  
repeatedly to select the preset number  
that you want.  
Presetting radio stations (continued)  
5 Press MEMORY on the remote.  
7 Press ENTER on the remote.  
The station is stored to the selected preset  
number.  
A preset number flashes.  
PRESET  
STEREO  
TUNED  
8 Repeat steps 2 through 7 to preset  
MHz  
1FM1005  
other stations.  
Other Operations  
Preset number  
Frequency  
Do this  
To  
6 Press ./> on the remote  
repeatedly to select the preset number  
that you want.  
Follow the procedure described in  
Setting presets through manual  
tuning.  
Tune in a station  
with a weak  
signal  
7 Press ENTER on the remote.  
The station is stored to the selected preset  
number.  
Press TUNING MODE (or  
TUNING MODE/PLAY MODE  
on the remote).  
Stop setting  
presets  
Start over from step 2.  
To change the  
preset number  
8 Repeat steps 2 through 7 to preset  
other stations.  
Tip  
To change the AM tuning interval  
(Except for the European, Middle  
Eastern and Philippine models)  
Press TUNING MODE (or TUNING MODE/PLAY  
MODE on the remote) when you want to stop  
scanning.  
The AM tuning interval is factory-preset to 9 kHz (or  
10 kHz for some areas). To change the AM tuning  
interval, tune in any AM station first, then turn off the  
system. Press and hold TUNING + and CD x. When  
you change the interval, all the AM preset stations are  
erased. To reset the interval, tune in any AM station  
first, then turn off the system. Press and hold  
TUNING and CD x.  
Setting presets through  
manual tuning  
1 Press FUNCTION repeatedly until  
“TUNER” appears in the display.  
2 Press TUNER BAND to select FM or  
Tips  
AM.  
The preset stations are retained for about a day even  
if you disconnect the mains lead or if a power  
failure occurs.  
To improve the reception, adjust the supplied  
antennas or connect an external antenna.  
3 Press TUNING MODE (or TUNING  
MODE/PLAY MODE on the remote)  
repeatedly until “AUTO” and “PRESET”  
disappear from the display.  
4 Press TUNING +/– (or m/M on the  
remote) repeatedly to tune in the  
desired station.  
5 Press MEMORY on the remote.  
A preset number flashes.  
PRESET  
STEREO  
TUNED  
MHz  
1FM1005  
Preset number  
Frequency  
10GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
Using the Radio Data  
System (RDS)  
(European model only)  
You can listen to a radio station either by selecting a  
preset station, or by manually tuning in the station.  
Listening to a preset station  
What is the Radio Data  
System?  
— Preset Tuning  
Radio Data System (RDS) is a broadcasting  
service that allows radio stations to send  
additional information along with the regular  
program signal. RDS is available only on FM  
stations.*  
Preset radio stations in the tuners memory first  
(see Presetting radio stationson page 9).  
1 Press FUNCTION repeatedly until  
“TUNER” appears in the display.  
Note  
2
Press TUNER BAND to select FM or AM.  
RDS may not work properly if the station you are  
tuned in is not transmitting the RDS signal properly  
or if the signal is weak.  
3 Press TUNING MODE (or TUNING  
MODE/PLAY MODE on the remote)  
repeatedly until “PRESET” appears in  
the display.  
* Not all FM stations provide RDS service, nor do  
they provide the same types of services. If you are  
not familiar with the RDS system, check with your  
local radio stations for details on RDS services in  
your area.  
4 Press TUNING +/– (or m/M on the  
remote) repeatedly to select the desired  
preset station.  
Receiving RDS broadcasts  
Listening to non-preset radio  
station  
Simply select a station from the FM band.  
When you tune in a station that provides RDS  
services, the station name appears in the  
display.  
— Manual Tuning  
1 Press FUNCTION repeatedly until  
“TUNER” appears in the display.  
To check the RDS information  
Each time you press DISPLAY on the remote,  
the display changes cyclically as follows:  
2
Press TUNER BAND to select FM or AM.  
3 Press TUNING MODE (or TUNING  
MODE/PLAY MODE on the remote)  
repeatedly until “AUTO” and “PRESET”  
disappear from the display.  
Station name* t Frequency t Clock display  
* If the RDS broadcast is not properly received, the  
station name may not appear in the display.  
4 Press TUNING +/– (or m/M on the  
remote) repeatedly to tune in the  
desired station.  
Tips  
To improve broadcast reception, adjust the supplied  
aerials, or connect a commercially available  
external aerial.  
When an FM stereo program has static noise, press  
FM MODE repeatedly until MONOappears.  
There will be no stereo effect, but the reception will  
improve.  
Press TUNING MODE (or TUNING MODE/PLAY  
MODE on the remote) repeatedly until AUTO”  
appears in step 3 above, then press TUNING + / –  
(or m/M on the remote). The frequency  
indication changes and scanning stops when the  
system tunes in a station (Automatic Tuning).  
11GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Tape  
Other Operations  
Loading a tape  
Do this  
To  
Press TAPE x.  
Stop playback  
Pause  
1 Press TAPE EJECT Z.  
Press TAPE X (or X on the  
remote). Press again to  
resume playback.  
2 Load a recorded/recordable tape into  
the cassette holder.  
With the tape stopped, press  
TAPE m/M.  
Fast-forward or  
rewind  
With the side you want to play/  
record on facing towards you  
Press TAPE EJECT Z.  
Remove the tape  
Z
x
Y
m
M
X
z
?/1  
Playing a tape  
You can use Type I (normal) tape.  
1 Load a recorded tape into the cassette  
holder.  
2 Press FUNCTION repeatedly until  
TAPEappears in the display.  
3 Press DIR MODE on the remote  
repeatedly to select “ ” to play one  
side of the tape, “  
to play both  
sides, or “  
* to play both sides  
repeatedly.  
* The tape automatically stops after playing back  
five times.  
4 Press TAPE Y.  
Press TAPE Y again to play the reverse  
side. The tape starts playing back.  
12GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording to a tape  
–– CD Synchro Recording/Recording Manually/Program Edit  
You can record from a CD (or connected components) or radio. You can use Type I (normal) tape.  
Recording from a CD  
(CD Synchro Recording)  
Recording manually  
Steps  
Load a recordable tape into the cassette holder.  
1
2
Press FUNCTION repeatedly to select  
the source you want to record from.  
Load a CD onto the disc tray.  
Load a CD (or other music source), or  
tune in the desired station.  
Press FUNCTION repeatedly until CD”  
appears in the display.  
3
4
Press TAPE z REC.  
Press CD SYNC.  
The tape stands by for recording.  
and B(or b) appear.  
To start recording on the side facing away from you, press TAPE Y until “  
changes to .”  
Press DIR MODE on the remote repeatedly to select “ ” to record on one side of  
5
6
the tape, or “  
or “  
to record on both sides.  
Press TAPE X, and then start playing  
the desired source.  
Press TAPE X.  
To stop recording  
Press TAPE x.  
Tip  
For recording manually:  
To pause recording, press TAPE X.  
continued  
13GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording to a tape (continued)  
To place a specific number of tracks  
on each side of the tape during CD  
Synchro Recording  
Recording CD tracks in your  
favorite order  
1 Program the tracks for the first side by  
doing steps 1 to 6.  
–– Program Edit  
2 Press X on the remote.  
3 Program the tracks for the other side by  
1 Load a recordable tape into the  
doing steps 5 and 6.  
cassette holder.  
4 Do steps 7 to 9 (see Note below).  
2 Load a CD onto the disc tray.  
When the X command is detected during  
CD Synchro Recording, the CD will pause,  
the first side of the tape will continue  
running till it ends, the tape will reverse  
direction, the CD will play and recording of  
the remaining tracks will resume on the  
other side of the tape.  
3 Press FUNCTION repeatedly until CD”  
appears in the display.  
4 Press PLAY MODE (or TUNING MODE/  
PLAY MODE on the remote) repeatedly  
until PGMappears in the display.  
5 Press CD ./> repeatedly until the  
desired track number appears in the  
display.  
Note  
To enable two-sided recording, you must select  
or “  
in step 8 on the left.  
6 Press PLAY MODE (or TUNING MODE/  
PLAY MODE on the remote).  
The selected track is programmed.  
Timer-recording radio  
programs  
The selection number appears in the  
display.  
To program additional tracks, repeat steps 5  
and 6.  
To timer-record, make sure that you have set  
the system clock correctly (see Setting the  
clockon page 7) and preset the radio station  
(see Presetting radio stationson page 9).  
7 Press CD SYNC.  
The tape stands by for recording and the CD  
stands by for playback.  
1 Tune in the desired preset radio station  
(see Listening to the radioon page  
11).  
and B(or b) appear, and the  
CD SYNC indicator lights up.  
To start recording on the side facing away  
from you, press TAPE Y until “  
changes to .”  
2 Load a recordable tape.  
3 Press TIMER SET on the remote.  
8 Press DIR MODE on the remote  
4 Press ./> on the remote  
repeatedly until SET RECappears in  
the display.  
repeatedly to select “ ” to record on  
one side of the tape, or “  
or “  
to record on both sides.  
SET RECscrolls and c RECappears  
in the display.  
9 Press TAPE X.  
5 Press ENTER on the remote.  
ON TIMEappears, then the hour  
indication flashes.  
To  
Do this  
Stop recording  
Press TAPE x.  
Cancel Program  
Edit  
Press PLAY MODE (or  
TUNING MODE/PLAY  
MODE on the remote)  
repeatedly until PGM”  
disappears from the display.  
14GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound Adjustment  
6 Set the starting time.  
Press ./> on the remote repeatedly to  
set the hour, then press ENTER on the  
remote.  
Adjusting the sound  
Generating a more dynamic sound  
(Dynamic Sound Generator)  
The minute indication begins flashing next.  
Press ./> on the remote repeatedly to  
set the minute, then press ENTER on the  
remote.  
Press DSG.  
To cancel the DSG, press DSG again.  
OFF TIMEappears, then the hour  
indication flashes again.  
Adjusting the bass  
Turn BASS.  
7 Set the stopping time by repeating step  
You can adjust the bass.  
6.  
The start time, the stopping time,  
TUNER, and the preset station appear in  
turn, then the original display returns.  
Adjusting the treble  
Turn TREBLE.  
You can adjust the treble.  
8 Press @/1 to turn off the system.  
When the recording starts, the volume level  
is automatically set to the minimum.  
To  
Do this  
Check the settings  
Press TIMER SELECT on the  
remote repeatedly until  
c RECappears in the  
display. The preset items  
appear in turn.  
Press TIMER SELECT on the  
remote repeatedly until  
c RECdisappears from the  
display.  
Turn off the timer  
Tip  
Once you set the timer, the time settings will remain  
in the systems memory until you change them, even  
when you turn the system or the timer off. The  
settings that were last used will be in effect when you  
turn the timer on again.  
Notes  
The system will turn on 15 seconds before the  
specified starting time.  
If the system is turned on at the specified starting  
time, recording will not occur.  
When you have set the Sleep Timer, the timer  
recording will not operate until the Sleep Timer  
Function is turned off.  
You cannot operate the Daily Timer and the timer  
recording at the same time.  
15GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Display  
Other Features  
Using the display  
Falling asleep to music  
Sleep Timer  
Checking the remaining time  
(CD)  
The Sleep Timer Function lets you specify a  
sleep time, after which the system stops playing  
and turns off automatically. You can thus fall  
asleep to music.  
Press DISPLAY on the remote during play.  
Each time you press the button, the display  
changes cyclically as follows:  
Press SLEEP on the remote repeatedly.  
The sleep time changes as follows:  
Current track number and elapsed playing time  
of the track t Current track number and  
remaining playing time of the track* t  
Remaining playing time of the entire CD t  
Clock display  
AUTO* t 90MIN t 80MIN t 70MIN t  
t 10MIN t OFF t AUTO* t …  
* The system turns off after the current CD or tape  
finishes playing (up to 100 minutes). The system  
also turns off when you manually stop the CD or  
tape.  
*
“– – –.– –” appears when you check the remaining  
playing time of a CD track whose number is 25 or  
over.  
To  
Press  
Checking the total playing  
time (CD)  
Check the remaining  
sleep time**  
SLEEP on the remote once.  
Change the sleep time  
SLEEP on the remote  
repeatedly until the time  
you want appears.  
Press DISPLAY on the remote in stop  
mode.  
Cancel the Sleep  
Timer Function  
SLEEP on the remote  
repeatedly until OFF”  
appears.  
Each time you press the button, the display  
changes cyclically as follows:  
Total playing time t Clock display t  
Current source display  
**You cannot check the remaining time if you select  
AUTO.  
Waking up to music  
Daily Timer  
By setting the Daily Timer, you can make the  
system automatically turn on and off at  
specified times. To use this function, make  
sure that you have set the system clock  
correctly (see Setting the clockon page 7).  
16GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1 Prepare the music source you want to  
8 Press ./> on the remote  
repeatedly until the music source you  
want appears.  
listen to when the system turns on.  
CD: Load a CD. To start playing from a  
specific track, make a program (see  
The display changes as follows:  
Programming the CD trackson page 9).  
t TUNER y CD T  
Tape: Load a tape with the side you want  
t TAPE T  
to play facing towards you.  
9 Press ENTER on the remote.  
The starting time, the stopping time, and the  
music source appear in turn, then the  
original display returns.  
Radio: Tune in the preset radio station  
that you want (see Listening to the radio”  
on page 11).  
2 Adjust the volume.  
10Press @/1 to turn off the system.  
3 Press TIMER SET on the remote.  
To  
Do this  
4 Press ./> on the remote  
repeatedly until SET DAILYappears  
in the display.  
Check the settings  
Press TIMER SELECT on the  
remote repeatedly until  
c DAILYappears in the  
display. The preset items  
appear in turn.  
SET DAILYscrolls and c DAILY”  
appears in the display.  
5 Press ENTER on the remote.  
ON TIMEappears, then the hour  
indication flashes.  
Turn off the timer  
Press TIMER SELECT on the  
remote repeatedly until  
c DAILYdisappears from  
the display.  
6 Set the starting time.  
Press ./> on the remote repeatedly to  
set the hour, then press ENTER on the  
remote.  
Tip  
Once you set the timer, the time settings will remain  
in the systems memory until you change them, even  
when you turn the system or the timer off. The  
settings that were last used will be in effect when you  
turn the timer on again.  
The minute indication begins flashing next.  
Press ./> on the remote repeatedly to  
set the minute, then press ENTER on the  
remote.  
Notes  
The system will turn on 15 seconds before the  
specified starting time.  
OFF TIMEappears, then the hour  
indication flashes again.  
When you have set the Sleep Timer, the Daily  
Timer will not operate until the Sleep Timer  
Function is turned off.  
You cannot operate the Daily Timer and the timer  
recording at the same time.  
7 Set the stopping time by repeating step  
6.  
17GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Components  
Hooking up optional components  
To enhance your system, you can connect optional components. Refer to the operating instructions  
provided with each component.  
MD deck / VCR  
From the audio output  
MD deck  
To the digital input jack of  
an MD deck  
jacks of an MD deck /  
VCR  
A AUDIO IN (MD/VIDEO) jacks  
Listening to audio from a  
connected component  
Use audio cords (not supplied) to connect an  
MD deck or VCR to these jacks. You can then  
listen to analog audio from the MD deck or  
VCR through this system.  
1 Connect the audio cords.  
B OPTICAL DIGITAL OUT (CD) jack  
2 Press FUNCTION repeatedly until MD”  
Use a digital optical cable (square, not  
supplied) to connect an MD deck to this jack.  
You can then output the digital audio to the  
MD deck from this system. If the jack is  
covered with a cap, remove it before use.  
or VIDEOappears.  
Start playing the connected component.  
Tip  
If you cannot select VIDEOby pressing  
FUNCTION repeatedly, turn off the system and then  
press CD x and FUNCTION at the same time. The  
function will change from MDto VIDEO, and  
VIDEOwill appear in the display. To change back  
to MD, repeat this procedure.  
Recording on a connected  
component  
1 Connect the digital optical cable.  
2 Start recording.  
Refer to the operating instructions provided  
with connected component.  
18GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Speakers  
Problems and remedies  
Sound comes from only one channel, or the left  
and right volumes are unbalanced.  
Should you encounter a problem with your  
system, do the following:  
Check the speaker connections and placement.  
1 Make sure the power cord and speaker cords  
are correctly and firmly connected.  
CD Player  
2 Find your problem in the troubleshooting  
checklist below and take the indicated  
corrective action.  
The CD will not play.  
The CD is dirty.  
If the problem persists after doing all of the  
above, consult your nearest Sony dealer.  
The surface of the CD is scratched. Replace the  
CD.  
The CD is loaded with the label side down.  
Condensation has built up in the system.  
Remove the CD and leave the system turned on  
for about an hour until the moisture evaporates.  
General  
There is no sound from the speakers.  
Adjust the volume.  
Play does not start from the first track.  
The headphones are connected.  
Check the speaker connections.  
The player is in Program or Shuffle Play. Press  
PLAY MODE (or TUNING MODE/PLAY  
MODE on the remote) repeatedly until PGM”  
and SHUFFLEdisappear.  
There is severe hum or noise.  
A TV or VCR is placed too close to the unit.  
Move the unit away from the TV or VCR.  
0:00(or AM 12:00) flashes in the display.  
Tape Deck  
A power interruption has occurred. Set the clock  
(see page 7) and timer settings (see pages 14 and  
16) again.  
Recording cannot be done.  
There is no tape in the cassette holder.  
The timer does not function.  
The record protect tab has been removed from  
Make sure the clock is correctly set (see page 7).  
the cassette (see page 21).  
The tape has come to the end.  
c DAILYand c RECdo not appear when  
you press TIMER SELECT on the remote.  
The tape does not record or play, or there is a  
decrease in sound level.  
Make sure each timer is correctly set (see pages  
14 and 16).  
The heads are dirty. Clean them (see page 21).  
Make sure the clock is correctly set (see page 7).  
The record/playback heads are magnetized.  
Demagnetize them (see page 21).  
The color on the TV screen is irregular.  
Move the speakers farther away from the TV set.  
The tape does not erase completely.  
The record/playback heads are magnetized.  
Demagnetize them (see page 21).  
The remote does not work.  
There is an obstacle between the remote and the  
unit.  
There is excessive wow or flutter, or the sound  
drops out.  
You are not pointing the remote in the direction  
of the systems sensor.  
The capstans or pinch rollers are dirty. Clean  
them (see page 21).  
The batteries in the remote have run down.  
Replace the batteries.  
Noise increases or the high frequencies are  
missing.  
Make sure that the batteries are inserted  
correctly.  
The record/playback heads are magnetized.  
Demagnetize them (see page 21).  
continued  
19GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and remedies (continued)  
Tuner  
There is a severe hum or noise (TUNEDor  
STEREOflashes).  
Adjust the antenna.  
The signal strength is too weak. Connect an  
external antenna.  
Make sure that the antenna is connected  
properly.  
Do not bend or roll up the antenna.  
The two wires comprising the FM antenna have  
been pulled further apart since the system was  
first purchased. Repair or replace with a new  
one.  
The AM antenna wire is detached from the stand.  
Keep the antennas as far away from the speaker  
cords as possible.  
A stereo FM program cannot be received in  
stereo.  
Press FM MODE on the remote until STEREO”  
appears in the display.  
Resetting the system  
With the system turned on, press TAPE x,  
CD x and TUNER BAND at the same time.  
The system is reset to the factory settings. All  
previous settings are cleared and must be set  
again.  
Messages  
One of the following messages may appear or  
flash in the display during operations.  
NO DISC  
There is no CD on the disc tray.  
PGM FULL  
You try to program 25 tracks or more.  
PROTECT  
Consult your nearest Sony dealer.  
20GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Notes on CDs  
Before playing a CD, clean the CD surface with a  
cleaning cloth. Wipe the CD from the center out.  
Do not play a CD with tape, stickers, or adhesives  
on any of its surfaces as this may damage the  
system.  
Do not use solvents.  
Do not expose the CDs to direct sunlight or heat  
sources.  
Disc with non-standard shapes (e.g., heart, square,  
star) cannot be played on this system. Attempting  
to do so may damage the system. Do not use such  
discs.  
Precautions  
On operating voltage  
Before operating the system, check that the operating  
voltage of your system is identical with the voltage of  
your local power supply.  
On safety  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the wall  
outlet, even if the unit itself has been turned off.  
Unplug the system from the wall outlet (mains) if it  
will not be used for an extended period of time. To  
disconnect the power cord (mains lead), pull it out  
by the plug. Never pull the cord itself.  
Should any solid object or liquid fall into the  
system, unplug the system and have it checked by  
qualified personnel before operating it any further.  
AC power cord must be changed only at the  
qualified service shop.  
Cleaning the cabinet  
Clean the cabinet, panel and controls with a soft cloth  
slightly moistened with mild detergent solution. Do  
not use any type of abrasive pad, scouring powder or  
solvent such as thinner, benzene or alcohol.  
To save a tape permanently  
To prevent a tape from being accidentally recorded  
over, break off the cassette tabs from side A or side B  
as illustrated.  
On placement  
Do not place the system in an inclined position.  
Do not place the system in locations where it is:  
Extremely hot or cold  
Break off the  
cassette tab  
Dusty or dirty  
Very humid  
Subject to vibrations  
Subject to direct sunlight  
On heat buildup  
Although the unit heats up during operation, this is  
not a malfunction.  
Place the system in a location with adequate  
ventilation to prevent heat build-up in the system.  
If you continuously use this system at a large volume,  
the cabinet temperature of the top, side and bottom  
rises considerably. To avoid burning yourself, do not  
touch the cabinet.  
If you later want to reuse the tape for recording, cover  
the broken tab with adhesive tape.  
Before placing a cassette in the tape  
deck  
Take up any slack in the tape. Otherwise the tape  
may get entangled in the tape decks playing  
mechanism and become damaged.  
When using a tape longer than 90  
minutes  
To prevent a malfunction, do not cover the ventilation  
hole for the cooling fan.  
The tape is very elastic. Do not change the tape  
operations such as play, stop, and fast-winding etc.  
too frequently. The tape may get entangled in the  
tape decks playing mechanism.  
On operation  
If the system is brought directly from a cold place  
to a warm place, or is placed in a very damp room,  
moisture may condense on the lens inside the CD  
player. Should this occur, the system will not  
operate properly. Remove the CD and leave the  
system turned on for about an hour until the  
moisture evaporates.  
Cleaning the tape heads  
Clean the tape heads after every 10 hours of use.  
Make sure to clean the tape heads before making an  
important recording or after playing an old tape. Use  
a commercially available dry-type or wet-type  
cleaning cassette. For details, refer to the instructions  
of the cleaning cassette.  
When moving the unit, remove any disc that may be  
on the disc tray.  
If you have any questions or problems concerning  
your system, please consult your nearest Sony dealer.  
Demagnetizing the tape heads  
Demagnetize the tape heads and the metal parts that  
have contact with the tape after every 20 to 30 hours  
of use with a commercially available demagnetizing  
cassette. For details, refer to the instructions of the  
demagnetizing cassette.  
21GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD player section  
System  
Specifications  
Compact disc and digital  
audio system  
Laser  
Semiconductor laser  
(λ = 780 nm)  
Amplifier section  
Emission  
For the U.S. model  
AUDIO POWER SPECIFICATIONS  
duration: continuous  
780 - 790 nm  
2 Hz - 20 kHz (±0.5 dB)  
Wavelength  
Frequency response  
POWER OUTPUT AND TOTAL  
HARMONIC DISTORTION:  
Tape player section  
Recording system  
Frequency response  
4-track 2-channel stereo  
With 6-ohm loads, both channels driven, from  
70 - 20,000 Hz; rated 18 watts per channel  
minimum RMS power, with no more than 0.9%  
total harmonic distortion from 250 milliwatts to  
rated output.  
50 - 13,000 Hz (±3 dB),  
using a Sony TYPE I  
cassette  
±0.15% W. Peak (IEC)  
0.1% W. RMS (NAB)  
±0.2% W. Peak (DIN)  
Wow and flutter  
North American model:  
Continuous RMS power output (reference):  
35 + 35 W  
Tuner section  
FM stereo, FM/AM superheterodyne tuner  
(6 ohms at 1 kHz, 10%  
THD)  
Total harmonic distortion less than 0.07% (6 ohms at  
1 kHz, 18 W)  
FM tuner section  
Tuning range  
North American model: 87.5 - 108.0 MHz  
(100-kHz step)  
Other models:  
87.5 - 108.0 MHz  
(50-kHz step)  
FM wire antenna  
75 ohms unbalanced  
10.7 MHz  
European model:  
DIN power output (rated): 30 + 30 W  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
35 + 35 W  
Antenna  
Antenna terminals  
Intermediate frequency  
(6 ohms at 1 kHz, 10%  
THD)  
Music power output (reference):  
85 + 85 W  
AM tuner section  
Tuning range  
Pan-American model:  
530 - 1,710 kHz  
(with the tuning interval  
set at 10 kHz)  
531 - 1,710 kHz  
(with the tuning interval  
set at 9 kHz)  
531 - 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
Other models:  
The following measured at 230 V AC, 60 Hz  
DIN power output (rated): 27 + 27 W  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
32 + 32 W  
European model:  
(6 ohms at 1 kHz, 10%  
THD)  
Middle Eastern and Philippine models:  
531 - 1,602 kHz  
The following measured at 220 V AC, 60 Hz  
DIN power output (rated): 23 + 23 W  
(6 ohms at 1 kHz, DIN)  
Continuous RMS power output (reference):  
26 + 26 W  
(with the tuning interval  
set at 9 kHz)  
530 - 1,710 kHz  
(with the tuning interval  
set at 10 kHz)  
531 - 1,602 kHz  
(with the tuning interval  
set at 9 kHz)  
AM loop antenna, external  
antenna terminal  
450 kHz  
Other models:  
(6 ohms at 1 kHz, 10%  
THD)  
Inputs  
AUDIO IN MD (VIDEO) (phono jacks):  
Sensitivity 500/250 mV,  
impedance 47 kilohms  
Antenna  
Intermediate frequency  
Outputs  
OPTICAL DIGITAL OUT (CD):  
Optical  
PHONES:  
Accepts headphones with  
an impedance of 8 ohms  
or more  
SPEAKER:  
6 ohms  
22GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Speakers  
Speaker system  
Two-way, bass reflex  
system  
Speaker units  
11 cm dia., cone type  
woofer  
2.5 cm dia., semi-dome-  
type tweeter  
6 ohms  
Rated impedance  
Dimensions (w/h/d)  
Approx. 154 × 252 ×  
230 mm  
Mass  
Approx. 2.5 kg net per  
speaker  
General  
Power requirements  
North American model: 120 V AC, 60 Hz  
European model:  
Australian model:  
Mexican model:  
Other models:  
230 V AC, 50/60 Hz  
230 V AC, 50/60 Hz  
120 V AC, 60 Hz  
110 - 120 V or 220 -  
240 V AC , 50/60 Hz  
Adjustable with voltage  
selector  
Power consumption  
European model:  
See the nameplate  
0.5 W (in the standby  
mode)  
Other models:  
See the nameplate  
Dimensions (w/h/d)  
Approx. 190 × 252 ×  
340 mm incl. projecting  
parts and controls  
Mass  
Approx. 5.6 kg  
Supplied accessories  
Remote commander (1)  
AM loop antenna (1)  
FM wire antenna (1)  
Batteries (2)  
Design and specifications are subject to change  
without notice.  
23GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation  
Printed in Korea  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Fax Machine FO 775L User Manual
Sharp Mixer EM H5DW User Manual
Singer Sewing Machine AH Series User Manual
Smooth Fitness Treadmill SMOOTH 96H User Manual
Snapper Lawn Mower 1691282 User Manual
Sony Home Theater System DAV DZ170 User Manual
Sony Speaker DTC A6 User Manual
SUPER MICRO Computer TV Video Accessories SC823T User Manual
Suunto Heart Rate Monitor T6 User Manual
Sylvania Portable DVD Player SDVD7014 User Manual