4-178-247-14(1)
Blu-ray Disc/DVD
Home Theatre System
Operating Instructions
BDV-E870 / E370
©2010 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
guarantee matters please refer to
the addresses given in separate
service or guarantee documents.
years old) is still under
• “Blu-ray Disc,” “DVD+RW,”
“DVD-RW,” “DVD+R,” “DVD-
R,” “DVD VIDEO,” and “CD”
logos are trademarks.
development. Consult your doctor
(such as a pediatrician or eye
doctor) before allowing young
children to watch 3D video images.
Adults should supervise young
children to ensure they follow the
recommendations listed above.
• “Blu-ray 3D” and “Blu-ray 3D”
logo are trademarks of Blu-ray
Disc Association.
Precautions
This equipment has been tested and
found to comply with the limits set
out in the EMC Directive using a
connection cable shorter than 3
meters. (European and Russian
models only)
• “BRAVIA” is a trademark of
Sony Corporation.
Copyrights and
Trademarks
• “AVCHD” and the “AVCHD”
logo are trademarks of Matsushita
Electric Industrial Co., Ltd. and
Sony Corporation.
• This system incorporates with
Dolby* Digital and Dolby Pro
Logic (II) adaptive matrix
surround decoder and the DTS**
Digital Surround System.
* Manufacturedunder license
from Dolby Laboratories.
Dolby, Pro Logic, and the
double-D symbol are
On power sources
• The unit is not disconnected from
the mains as long as it is
connected to the AC outlet, even
if the unit itself has been turned
off.
• “S-AIR” and its logo are
trademarks of Sony Corporation.
•
, “XMB,” and “xross media
bar” are trademarks of Sony
Corporation and Sony Computer
Entertainment Inc.
• As the main plug is used to
disconnect the unit from the
mains, connect the unit to an
easily accessible AC outlet.
Should you notice an abnormality
in the unit, disconnect the main
plug from the AC outlet
immediately.
• “PLAYSTATION”is a trademark
of Sony Computer Entertainment
Inc.
trademarks of Dolby
Laboratories.
®
®
• DivX , DivX Certified and
associated logos are registered
trademarks of DivX, Inc. and are
used under license.
**Manufacturedunder license
under U.S. Patent #’s:
5,451,942; 5,956,674;
5,974,380; 5,978,762;
6,226,616; 6,487,535;
7,212,872; 7,333,929;
• Music and video recognition
technology and related data are
provided by Gracenote .
On watching 3D video
images
Some people may experience
discomfort (such as eye strain,
fatigue, or nausea) while watching
3D video images. Sony
®
7,392,195; 7,272,567 &
other U.S. and worldwide
patents issued & pending.
DTS and the Symbol are
registered trademarks, &
DTS-HD, DTS-HD Master
Audio, and the DTS logos
are trademarks of DTS, Inc.
Product includes software.
© DTS, Inc. All Rights
Reserved.
Gracenote is the industry standard
in music recognition technology
and related content delivery. For
more information, please visit
CD, DVD, Blu-ray Disc, and
music and video-related data from
Gracenote, Inc., copyright ©
2000-present Gracenote.
Gracenote Software, copyright ©
2000-present Gracenote. One or
more patents owned by Gracenote
apply to this product and service.
See the Gracenote website for a
nonexhaustive list of applicable
Gracenote patents. Gracenote,
CDDB, MusicID, MediaVOCS,
the Gracenote logo and logotype,
and the “Powered by Gracenote”
logo are either registered
recommends that all viewers take
regular breaks while watching 3D
video images. The length and
frequency of necessary breaks will
vary from person to person. You
must decide what works best. If you
experience any discomfort, you
should stop watching the 3D video
images until the discomfort ends;
consult a doctor if you believe
necessary. You should also review
(i) the instruction manual and/or the
caution message of any other
device used with, or Blu-ray Disc
contents played with this product
and (ii) our website (for customers
in Europe and Russia: http://
• This system incorporates High-
Definition Multimedia Interface
(HDMITM) technology.
HDMI, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
• Java and all Java-based
trademarks and logos are
trademarks or registered
trademarks of Sun Microsystems,
Inc.
trademarks or trademarks of
Gracenote in the United States
and/or other countries.
myproduct/; for customers in Asia
asia.com/support/) for the latest
information. The vision of young
children (especially those under six
• “BD-LIVE” and
“BONUSVIEW” are trademarks
of Blu-ray Disc Association.
• “Blu-ray Disc” is a trademark.
GB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
• “PhotoTV HD” and the “PhotoTV
HD” logo are trademarks of Sony
Corporation.
About These
Operating
Instructions
• MPEG Layer-3 audio coding
technology and patents licensed
from Fraunhofer IIS and
Thomson.
• iPod is a trademark of Apple Inc.,
registered in the U.S. and other
countries.
• The instructions in these
Operating Instructions
describe the controls on the
remote. You can also use the
controls on the unit if they
have the same or similar
names as those on the remote.
• In this manual, “disc” is used
as a general reference for
BDs, DVDs, Super Audio
CDs, or CDs unless otherwise
specified by the text or
illustrations.
• “Made for iPod” means that an
electronic accessory has been
designed to connect specifically
to iPod and has been certified by
the developer to meet Apple
performance standards.
• Apple is not responsible for the
operation of this device or its
compliance with safety and
regulatory standards.
• Windows Media is either a
registered trademark or trademark
of Microsoft Corporation in the
United States and/or other
countries.
• The instructions in this
manual are for BDV-E870
and BDV-E370. BDV-E870
is the model used for
illustration purposes. Any
difference in operation is
clearly indicated in the text,
for example, “BDV-E870.”
• The items displayed on the
TV screen may vary
®
• DLNA , the DLNA Logo and
DLNA CERTIFIED™ are
trademarks, service marks, or
certification marks of the Digital
Living Network Alliance.
• Other system and product names
are generally trademarks or
registered trademarks of the
manufacturers. ™ and ® marks
are not indicated in this document.
depending on the area.
• The default setting is
underlined.
• The system is compatible
with the S-AIR function,
which allows transmission of
sound between S-AIR
products wirelessly. For
details on the S-AIR function,
• Notes or instructions for the
surround amplifier, surround
back amplifier, or S-AIR
receiver in these Operating
Instructions refer only to
when the surround amplifier,
surround back amplifier, or
S-AIR receiver is used.
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Controlling Your TV with the Supplied
Remote ........................................... 51
Step 3: Performing the Easy
Step 5: Enjoying Surround
Selecting the Effect to Suit
the Source .......................................36
Selecting the Audio Format, Multilingual
Tracks, or Channel..........................36
Enjoying Multiplex Broadcast
Sound..............................................37
Using the Radio Data System
(RDS)..............................................40
Using the Control for HDMI Function for
“BRAVIA” Sync ............................46
Calibrating the Appropriate Settings
Automatically .................................48
Deactivating the Buttons on
the Unit ...........................................51
GB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
BDV-E870
• Front speakers (2)
• FM wire antenna (aerial) (1) • Screws (6)
or
• Speaker-bottom covers (2)
• Speaker cords (3, blue/gray/
green)
• Operating Instructions
• Speaker Installation Guide
• Quick Setup Guide
• End user license agreement
• HDMI cable (1)
• Video cord (1)
(Taiwan models only)
• Remote commander
(remote) (1)
• Surround speakers (2)
• R6 (size AA) batteries (2)
• Calibration mic (1)
• Center speaker (1)
• Subwoofer (1)
• Bases (2)
GB
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BDV-E370
• Front speakers (2)
• FM wire antenna (aerial) (1) • Calibration mic (1)
or
• Operating Instructions
• Speaker cords (5, white/red/
• Quick Setup Guide
• Surround speakers (2)
blue/gray/green)
• End user license agreement
• HDMI cable (1)
(Singapore, Thai, and
Taiwan models only)
• Video cord (1)
• Center speaker (1)
• Subwoofer (1)
• Remote commander
(remote) (1)
• R6 (size AA) batteries (2)
Preparing the remote
Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the
markings inside the compartment.
GB
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Control
For more information, refer to the pages indicated in parentheses.
Front panel
FUNCTION
VOLUME
VOLUME
A
"/1 (on/standby)
C
(USB) port (page 30)
Used for connecting a USB device.
Turns on the unit, or sets it to standby mode.
D Front panel display
(remote sensor)
B Play operation buttons
E
Opens or closes the disc tray.
F Power indicator
Lights up while the system is turned on.
N (play)
Starts or re-starts playback (resume play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
x (stop)
Stops playback and remembers the stop
point (resume point).
The resume point for a title/track is the last
point you played or the last photo for a
photo folder.
FUNCTION
Selects the playback source.
VOLUME +/–
Adjusts the system’s volume.
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
About the indications in the front panel display
A Displays the current sound format.
H Flashes when the sleep timer is set.
B Lights up when the system is playing
via the PARTY STREAMING function.
I S-AIR indicator (only when the wireless
transmitter (not supplied) is inserted
into the unit)
C Lights up when outputting 1920 ×
1080p/24 Hz video signals.
Lights up during wireless
D Lights up when outputting 720p/1080i/
1080p video signals from the HDMI
OUT jack or 720p/1080i video signals
from the COMPONENT VIDEO OUT
jacks.
transmission. Flashes when [Standby]
is set to [On] and the system is in
standby mode while wireless
transmission between the unit and
S-AIR receiver is not activated. (page
E Lights up when the HDMI OUT jack is
correctly connected to an HDCP (High-
bandwidth Digital Content Protection)-
compliant device with HDMI or DVI
(Digital Visual Interface) input.
J Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, surround setting, etc.
F Lights up when a station is received.
K Lights up when repeat play is
(Radio only) (page 39)
activated.
G Lights up when stereo sound is
L Displays system’s playing status.
received. (Radio only) (page 39)
M Lights up when muting is on.
GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
Screws*
VIDEO OUT
LAN(100)
ARC
Y
P
B
/
C
B
P
R
/
CR
OUT
COMPONENT VIDEO OUT
EZW-T100
AUDIO
SAT/CABLE
TV
SPEAKERS
SPEAKERS
DIGITAL IN
DIGITAL IN
A. CAL MIC
ECM-AC2
FM COAXIAL 75
ANTENNA
FRONT
R
FRONT
L
SUBWOOFER
CENTER
SUR
R
SUR
L
COAXIAL
OPTICAL
R
AUDIO IN
L
A
(USB) port (page 30)
I ANTENNA (FM COAXIAL 75Ω) jack
(page 23)
J TV (DIGITAL IN OPTICAL) jack (page
C COMPONENT VIDEO OUT jacks (page
K SAT/CABLE (DIGITAL IN COAXIAL)
jack (page 22)
*
CAUTION
Please do not remove the screws unless you
are installing the EZW-T100.
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Enters the title/chapter numbers, radio
frequencies, etc.
Remote control
Selects the audio format/track.
ONE-TOUCH TV
THEATRE
PLAY
1
2
(subtitle) (page 55)
BRAVIA Sync
Selects the subtitle language when
multilingual subtitles are recorded on a BD-
ROM/DVD VIDEO.
1
2
5
8
0
3
6
9
SLEEP
4
7
SYSTEM
MENU
9
D.TUNING (page 39)
Selects the radio frequencies.
D.TUNING
C Color buttons (red/green/yellow/blue)
Short cut keys for selecting items on some
BD menus (can also be used for Java
interactive operations on BDs).
3
4
TOP MENU
POP UP/ MENU
RETURN
OPTIONS
D TOP MENU
Opens or closes the BD’s or DVD’s Top
Menu.
FUNCTION
SOUND MODE
5
6
HOME
PRESET
TUNING
DISPLAY
PRESET
TUNING
POP UP/MENU
Opens or closes the BD-ROM’s Pop-up
Menu, or the DVD’s menu.
8
OPTIONS (page 34)
Displays the options menu on the TV
screen.
TV
TV
7
RETURN
Returns to the previous display.
Number 5,
, 2 +, and N buttons have a
C/X/x/c
tactile dot. Use the tactile dot as a reference
when operating the remote.
Moves the highlight to a displayed item.
(ENTER)
•
: For TV operations
Enters the selected item.
(For details, see “Controlling Your TV with
Selects the playback source.
Enters or exits the system’s home menu.
Switches to the optimum video mode for
watching movies automatically.
SOUND MODE (page 36)
Selects the sound mode.
ONE-TOUCH PLAY (page 47)
Activates One-Touch Play.
F Playback operation buttons
Turns on the TV or sets it to standby mode.
./> (previous/next)
Skip to the previous/next chapter, track, or
file.
Turns on the system or sets it to standby
mode.
(replay/advance)
Briefly replay the current scenes for 10
seconds./Briefly fast forwards the current
scenes for 15 seconds.
GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
m/M (fast reverse/fast forward)
Fast reverse/fast forward the disc during
playback. Each time you press the button,
search speed changes.
I
Z (open/close)
Opens or closes the disc tray.
SLEEP (page 51)
Sets the sleep timer.
Activates slow-motion play when pressed
for more than one second in pause mode.
Plays one frame at a time when pressed in
pause mode.
Enters the system menu.
(favorites)
Displays the Internet contents added to the
Favorites List. You can save 18 favorite
Internet contents.
N (play)
Starts or re-starts playback (resume play).
Plays a slideshow when a disc containing
JPEG image files is inserted.
X (pause)
Pauses or re-starts playback.
x (stop)
Stops playback and remembers the stop
point (resume point). The resume point for
a title/track is the last point you played or
the last photo for a photo folder.
Radio operation buttons
PRESET +/–
TUNING +/–
G
(muting)
Turns off the sound temporarily.
Adjusts the volume.
TV 2 (volume) +/–
Adjusts the TV volume.
TV t (TV input)
Switches the TV’s input source between the
TV and other input sources.
Displays the playback information on the
TV screen.
When the function is “TUNER FM,”
changes the radio information in the front
panel display (European and Russian
models only).
When the function is “TV” or “SAT/
CABLE” and digital signals are input via
the DIGITAL IN jack, displays the stream
information in the front panel display.
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1: Installing the System
Positioning the speakers
For the best possible surround sound, place all speakers at the same distance from the listening position
(A). The distance can be between 0.0 to 7.0 meters.
If you cannot place the center speaker and surround speakers at the same distance as (A), place them
within 7.0 meters of the listening position.
Place the surround speakers to the rear of the listening position (B).
The subwoofer can be placed anywhere in the room.
Center speaker
Subwoofer
Front left speaker (L)
Front right speaker (R)
A
A
A
30
30
B
45
45
B
A
A
Surround left speaker (L)
Surround right speaker (R)
Note
• Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed,
oiled, polished, etc.) floor, as staining or discoloration may result.
• Do not lean or hang on a speaker, as it may fall down.
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
To add the optional surround back speakers
You can enjoy 7.1 surround sound by purchasing the Wireless Surround Speaker Kit (WAHT-SBP2,
optional). The optional product lineup differs depending on the area.
For the position of the surround back speakers, refer the illustration below (C).
Center speaker
Subwoofer
Front left speaker (L)
Front right speaker (R)
Surround left
speaker (L)
Surround right
speaker (R)
30 30
45
45
C
C
Surround back left speaker (L)
(optional)
Surround back right speaker (R)
(optional)
Note
• To use the surround back speakers, set [Surround Back] (page 49) in [Speaker Settings] to [Yes] while performing
Installing the speakers on a wall
Caution
• Contact a screw shop or installer regarding the wall material or screws to be used.
• Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach
the screws securely to a beam and fasten them to the wall. Install the speakers on a vertical and flat wall where
reinforcement is applied.
• Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or
improper screw installation, natural calamity, etc.
Before installing the front speakers of BDV-E870 on a wall, you need to disassemble the speakers. You
can install the upper part of the speakers on a wall.
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
To disassemble the speaker
(Front speakers of BDV-E870 only)
1
Disconnect the speaker cords from the speaker.
Rear of the speaker
2
Remove the screw (pre-installed) at the rear of the speaker.
This screw is used when reassembling the speaker. Be sure not to lose the screw.
Screw
Rear of the speaker
3
Disassemble the speaker by lifting the upper part of the speaker.
Upper part
Lower part
Rear of the speaker
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Pull out the speaker cord from the bottom of the lower part of the speaker.
The removed speaker cord is used when installing the speaker on a wall.
Lower part of the speaker
,
Speaker cord
5
Remove the protection paper from the speaker-bottom cover, then attach the speaker-
bottom cover to the bottom of the upper part of the speaker.
Bottom of the upper part of
the speaker
Protection paper
,
,
Speaker-bottom cover
Note
• When removing the protection paper, pull it off via the section exposed by the notch in the speaker-bottom cover.
Fully-disassembled illustration
Upper part of
the speaker
Lower part of
the speaker
Speaker cord
Screw
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
To install the speakers on a wall
Before installing the speakers on a wall, connect the speaker cord to the speaker.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #.
Color tube
Front left speaker (L): White
Front right speaker (R): Red
Center speaker: Green
Surround left speaker (L): Blue
Surround right speaker (R): Gray
1
Prepare screws (not supplied) that are suitable for the hole on the back of each speaker.
See the illustrations below.
Hole on the back of
the speaker
4 mm
5 mm
30 mm
10 mm
GB
17
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Fasten the screws to the wall.
BDV-E870
BDV-E370
For the front speakers
For the center speaker
219 mm
304 mm
8 to 10 mm
8 to 10 mm
For the center speaker
219 mm
For the other speakers
8 to 10 mm
8 to 10 mm
For the surround speakers
8 to 10 mm
3
Hang the speakers on the screws.
Hole on the back of
the speaker
5 mm
10 mm
Rear of the speaker
GB
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the System
For connecting the system, read the information on the following pages.
Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other
connections are made.
Note
• When you connect another component with a volume control, turn down the volume of the other components to a
level where sound is not distorted.
Connecting the speakers
The connector of the speaker cords and the color tube are color-coded depending on the type of speaker.
Connect the speaker cords to match the color of the SPEAKERS jacks of the unit.
Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with
the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord
insulation (rubber covering) in the speaker terminals.
To connect speaker cords to the unit
When connecting to the unit, insert the connector until it clicks.
Rear panel of the unit
Gray
(Surround right speaker (R))
S
R
E
K
A
E
P
S
L
R
U
Blue
S
R
R
U
S
S
R
E
K
A
E
P
S
(Surround left speaker (L))
R
E
T
N
E
C
FE
O
O
W
B
U
T
N
O
R
F
R
T
N
O
R
F
Green
(Center speaker)
Red
(Front right
speaker (R))
Purple
(Subwoofer)
White
(Front left speaker (L))
To connect speaker cords to the speaker
Rear or bottom of the speaker
Color tube
(+)
(–)
Connector
GB
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV (Video connection)
This connection sends a video signal to the TV.
Depending on the jacks on your TV, select the connection method.
Rear panel of the unit
B Component video
cable (not supplied)
T
U
O
O
E
ID
V
ARC
OUT
/
CR
R
P
/
T
CB
B
P
T
U
O
E
ID
V
Y
N
N
O
P
M
O
C
A HDMI cable*
C Video cord (supplied)
To the component
video input jacks of
the TV.
To the video input
jack of the TV.
To the HDMI IN jack
of the TV.
* The HDMI cable is supplied with Singapore, Thai, and Taiwan models only.
Method 1: HDMI cable (A) connection
If your TV has an HDMI jack, connect to the TV with an HDMI cable. Picture quality will be improved
compared to using the component video cable connection or the video cord connection.
Method 2: Component video cable (B) connection
If your TV does not have an HDMI jack, but has component video input jacks, connect to the TV with
a component video cable. Picture quality will be improved compared to using the video cord
connection.
When connecting with the component video cable, you need to select the type of output signal (page
53).
Method 3: Video cord (C) connection
If you do not have an HDMI cable or a component video cable, temporarily make this connection.
GB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the TV (Audio connection)
This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system,
perform this connection.
Rear panel of the unit
V
T
E
N
L
I
B
L
A
A
IT
IG
/C
T
A
D
S
IN
L
A
IT
IG
D
L
A
IC
T
P
O
L
IA
X
A
O
C
Digital optical cord (not
supplied)
To the digital optical out jack of
the TV.
With a digital audio connection, the system receives a Dolby Digital multiplex broadcast signal and
you can enjoy multiplex broadcast sound.
Note
• When you connect the TV and the unit with an audio cord, see “Connecting the other components” (page 22).
About Audio Return Channel
If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also
sends a digital audio signal from the TV. You do not need to make a separate audio connection for
listening to TV sound. For details of the Audio Return Channel function, see [Audio Return Channel]
GB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the other components
When you connect the system and other components to the TV, video signals from the system and the
components are sent to the TV, and audio signals from the components are sent to the system as
follows.
TV
Signal flow
System
: Video signal
: Audio signal
You can enjoy connected components via the system’s speakers.
• VCR or digital satellite receiver, etc. (not supplied), which has a digital coaxial output jack: D
• VCR, digital satellite receiver, PlayStation, or portable audio source, etc. (not supplied): E
Rear panel of the unit
D Digital coaxial cord
(not supplied)
IO
D
U
A
N
U
A
R
L
V
T
E
L
IN
B
L
A
A
IT
IG
/C
T
A
D
S
IN
L
A
IT
IG
D
L
A
IC
T
P
O
IA
X
A
O
C
E Audio cord
(not supplied)
To the digital coaxial out jack
of the VCR or digital satellite
receiver, etc.
To the audio out jacks of the VCR,
digital satellite receiver, PlayStation,
or portable audio source, etc.
GB
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the antenna (aerial)
To connect the antenna (aerial)
Rear panel of the unit
5
L
N
IA
N
X
A
O
C
M
F
E
T
N
A
or
FM wire antenna (aerial)
(supplied)
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
Outdoor FM antenna (aerial)
Unit
FM COAXIAL 75
ANTENNA
GB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Wireless LAN Adapter and the wireless LAN router
closer to each other.
Connecting to the network
To set the network settings
Wired Setup
Use a LAN cable to connect to the LAN (100)
terminal on the unit.
For details, see [Network Settings] (page 57)
and follow the on-screen instructions to
complete the setup.
About wireless LAN security
Since communication via the wireless LAN
function is established by radio waves, the
wireless signal may be susceptible to
interception. To protect wireless
LAN cable
(not supplied)
communication, this system supports various
security functions. Be sure to correctly
configure the security settings in accordance
with your network environment.
Internet
Broadband
router
ADSL modem/
cable modem
No Security
USB Wireless Setup
Although you can easily make settings, anyone
can intercept wireless communication or intrude
into your wireless network, even without any
sophisticated tools. Keep in mind that there is a
risk of unauthorized access or interception of
data.
Use a wireless LAN via the USB Wireless LAN
Adapter (Sony UWA-BR100* only) (not
supplied).
The USB Wireless LAN Adapter may not be
available in some regions/countries.
* As of January 2010.
WEP
Turn the unit off before connecting the
WEP applies security to communications to
prevent outsiders from intercepting
communications or intruding into your wireless
network. WEP is a legacy security technology
that enables older devices, which do not support
TKIP/AES, to be connected.
extension cable or inserting the USB Wireless
LAN Adapter. After inserting the USB Wireless
LAN Adapter to the base of the extension cable
and connecting the extension cable to the
(USB) port (front or rear), turn the unit on again.
WPA-PSK (TKIP), WPA2-PSK (TKIP)
TKIP is a security technology developed to
correct for the deficiencies of WEP. TKIP
assures a higher security level than WEP.
VIE
/
T
. I
I
WPA-PSK (AES), WPA2-PSK (AES)
AES is a security technology that uses an
advanced security method that is distinct from
WEP and TKIP.
AES assures a higher security level than WEP or
TKIP.
LAN cable
(not supplied)
USB
Wireless
LAN
Adapter
Internet
ADSL modem/ Wireless LAN
cable modem router
Note
• The placement distance between the USB Wireless
LAN Adapter and your wireless LAN router differs
depending on the usage environment. If the system
cannot connect to the network or the network
connection is unstable, move the USB Wireless LAN
Adapter to a different position or place the USB
GB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Step 3: Performing the
Easy Setup
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
Before performing Step 3
Make sure all connections are secure, and then
connect the AC power cord (mains lead).
Follow the Steps below to make the basic
adjustments for using the system.
Displayed items vary depending on the country
model.
Note
IC
M
L
A
C
.
A
2
C
-A
M
C
E
• To use the optional surround back speakers, set
[Surround Back] in [Speaker Settings] to [Yes]
"/1
1
4
7
2
5
8
0
3
6
9
Calibration mic
C/X/x/c,
HOME
1
Turn on the TV.
3
4
Press [/1 on the unit.
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
The Easy Setup Display for OSD language
selection appears.
- OSD
Easy Setup
Select the language to be displayed by this unit.
English
Deutsch
Français
Italiano
Español
GB
25
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Perform the [Easy Setup]. Follow the
on-screen instructions to make the
basic settings using C/X/x/c, and
Step 4: Selecting the
Source
.
For details about [Auto Calibration]
settings in [Easy Setup], see “Calibrating
You can select the playback source.
To recall the Easy Setup Display
1
4
7
2
5
8
0
3
6
9
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [Easy Setup], then
press
[Setup].
FUNCTION
.
4
Press C/c to select [Start], then press
.
The Easy Setup Display appears.
Press FUNCTION repeatedly until the
desired function appears in the front panel
display.
Each time you press FUNCTION, the function
changes as follows.
“BD/DVD” t “D. MEDIA” t “TUNER FM”
t“TV” t “SAT/CABLE” t “AUDIO” t
“BD/DVD” t …
Function
Source
“BD/DVD”
“D. MEDIA”
Disc that is played by the system
USB device, iPod, BRAVIA
Internet Video, or DLNA server
“TUNER FM”
“TV”
FM radio (page 39)
Component (TV, etc.) that is
connected to the TV (DIGITAL
IN OPTICAL) jack on the rear
panel, or a TV compatible with the
Audio Return Channel function
that is connected to the HDMI
OUT jack on the rear panel
“SAT/CABLE” Component that is connected to
the SAT/CABLE (DIGITAL IN
COAXIAL) jack on the rear panel
“AUDIO”
Component that is connected to
the AUDIO (AUDIO IN L/R)
jacks on the rear panel (page 22)
GB
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Enjoying Surround Sound
After performing the previous Steps and starting playback, you can easily enjoy surround sound. You
can also select pre-programmed surround settings that are tailored to different kinds of sound sources.
They bring the exciting and powerful sound of movie theaters into your home.
1
4
7
2
5
8
0
3
6
9
SYSTEM MENU
X/x/c,
Selecting surround settings based on your listening preference
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “SUR.SETTING” appears in the front panel display, then
press
or c.
3
Press X/x repeatedly until the surround setting you want appears in the front panel
display.
See the table below for surround sound setting descriptions.
4
5
Press
.
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
About speaker output of each surround setting
The table below describes the options when you connect all the speakers to the unit.
The default setting is “A.F.D. MULTI.”
Sound from
Surround setting
Effect
Depending on the source.
“A.F.D. STD”
(AUTO FORMAT
The system discriminates the sound format of the source and
presents sound as it was recorded/encoded.
DIRECT STANDARD)
GB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound from
Surround setting
Effect
“A.F.D. MULTI”
(AUTO FORMAT
DIRECT MULTI)
• 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from the 5.1
channel speakers by duplicating 2 channel source sound
across each speaker.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
“PRO LOGIC”
“PLII MOVIE”
• 2 channel source: The system simulates surround sound
from 2 channel sources and outputs sound from the 5.1
channel speakers.
– “PRO LOGIC” performs Dolby Pro Logic decoding.
– “PLII MOVIE” performs Dolby Pro Logic II movie
mode decoding.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
“NEO6 CIN”
“NEO6 MUS”
• 2 channel source: The system simulates surround sound
from 2 channel sources and produces 6.1 channel sound.
– “NEO6 CIN” performs DTS Neo:6 Cinema mode
decoding.
– “NEO6 MUS” performs DTS Neo:6 Music mode
decoding.
• Multi-channel source: The system outputs sound from the
speakers depending on the number of channels of the
source.
“2CH STEREO”
The system outputs the sound from the front speakers and
subwoofer regardless of sound format or number of channels.
Multi-channel surround formats are downmixed to 2
channels.
Note
• When you select “A.F.D. MULTI,” depending on the disc or source, the beginning of the sound may be cut off
while the optimum mode is automatically selected. To avoid cutting the sound, select “A.F.D. STD.”
• When bilingual broadcast sound is input, “PRO LOGIC” and “PLII MOVIE” are not effective.
• Depending on the input stream, the surround settings may not be effective.
• When changing the surround setting while using the S-AIR receiver, sound from the S-AIR receiver may skip.
• When you play a Super Audio CD, surround settings are not activated.
Tip
• The system memorizes the last surround setting selected for each function.
Whenever you select a function such as “BD/DVD” or “TUNER FM,” the surround setting that was last applied to
the function is automatically applied again. For example, if you select “BD/DVD” with “PRO LOGIC” as the
surround setting, then change to another function, and then return to “BD/DVD,” “PRO LOGIC” will be applied
again.
GB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
• Delete unnecessary data in internal memory or USB
Playback
memory. Select [Erase BD Data] in
[Video] to
delete unnecessary data. If you use USB memory as
local storage, all saved data in the [BUDA/BUDB]
folder is deleted. Make sure to backup any video/
music/photo data in the [BUDA/BUDB] folder.
Playing a Disc
For playable discs, see “Playable Discs”
Enjoying Blu-ray 3D
1
2
Switch the input selector on your TV so
that the signal from the system
appears on your TV screen.
You can enjoy Blu-ray 3D Discs with the 3D
logo*.
Press Z, and place a disc on the disc
tray.
*
1
Prepare for Blu-ray 3D Disc playback.
• Connect the system to your 3D-
compatible TV using a High-Speed
HDMI cable (not supplied).
• Set [3D Output Setting] and [TV Screen
Size Setting for 3D] in [Screen Settings]
2
Insert a Blu-ray 3D Disc.
The operation method differs depending on
the disc. Refer to the operating instructions
supplied with the disc.
3
Press Z to close the disc tray.
appears on the home menu and playback
starts.
Tip
If playback does not start automatically,
• Refer also to the operating instructions of your 3D-
compatible TV.
select
in the
[Video],
[Music], or
.
[Photo] category, and press
Enjoying BONUSVIEW/BD-LIVE
Some BD-ROMs with “BD-LIVE Logo*” have
bonus content and other data that can be
downloaded for enjoyment.
*
1
2
Prepare for BONUSVIEW/BD-LIVE.
• Set [BD Internet Connection] to [Allow]
Insert a BD-ROM with BONUSVIEW/
BD-LIVE.
The operation method differs depending on
the disc. Refer to the operating instructions
of the disc.
GB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the play information
Playing from a USB
Device
You can check the playback information, etc.,
by pressing DISPLAY.
The displayed information differs depending on
the disc type and player status.
You can play video/music/photo files on the
connected USB device.
For playable types of files, see “Playable Types
Example: when playing a BD-ROM
1
Connect the USB device to the
(USB) port on the unit.
Refer to the operating instructions of the
USB device before connecting.
USB device
A
B
C
D
Output resolution/Video frequency
Title number or name
The currently selected audio setting
Available functions (
subtitle)
angle,
audio,
E
Playback information
Displays disc type, play mode, repeat type,
video codec, bit rate, playing status bar,
playing time, total time
USB device
F
G
Chapter number
2
3
Press C/c to select
[Video],
The currently selected angle
[Music], or
[Photo].
Press X/x to select
(front)] or [USB device (rear)], then
[USB device
press
.
Note
• Do not remove the USB device during
operation. To avoid data corruption or damage
to the USB device, turn the system off when
connecting or removing the USB device.
GB
30
Download from Www.Somanuals.com. All Manuals Search And Download.
To operate the iPod using the
remote
You can operate the iPod using the buttons on
the remote. The following table shows an
example of buttons that can be used.
Enjoying an iPod
You can enjoy the sound and charge the battery
of an iPod via the system.
Compatible iPod models
The compatible iPod models are as follows.
Update your iPod with the latest software before
using with the system.
Press
Operation
N, X
Same operation as the N/X button
of the iPod.
x
Pause.
m or M
. or >
Fast reverse or forward.
Same operation as the . or >
buttons of the iPod.
DISPLAY,
RETURN,
C
Same operation as the MENU button
of the iPod.
X/x
Same operation as the Click Wheel
of the iPod.
, c
Same operation as the Center button
of the iPod.
Note
• The iPod is charged when connected to the system
while the system is turned on.
• You cannot transfer songs onto the iPod.
• Sony cannot accept responsibility in the event that
data recorded to iPod is lost or damaged when using
an iPod connected to this unit.
• This product has been designed specifically to work
with iPod and has been certified to meet Apple
performance standards.
1
Connect the iPod to the front
port on the unit with the iPod’s USB
cable.
(USB)
• Do not remove the iPod during operation. To avoid
data corruption or damage to the iPod, turn the system
off when connecting or removing the iPod.
2
3
Press C/c to select
Press X/x to select [iPod (front)],
then press
[Music].
.
The sound from the iPod is played on the
system.
You can operate the iPod using the buttons
on the remote.
For operation details, refer to the operating
instructions of the iPod.
GB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing files stored on a DLNA
server (DLNA Player)
Playing via a Network
You can play video/music/photo files on your
home server, such as a DLNA-certified network
audio system or a PC with software that enables
a DLNA-certified server function, by
Streaming BRAVIA Internet
Video
BRAVIA Internet Video serves as a gateway
delivering the selected Internet content and a
variety of on-demand entertainment straight to
your unit.
connecting the system to your home network.
1
Prepare for playing files on a DLNA
server.
• Set [Connection Server Settings]
1
Prepare for BRAVIA Internet Video.
2
3
Press C/c to select
[Video],
2
3
Press C/c to select
[Video],
[Music], or [Photo].
[Music], or [Photo].
Press X/x to select an Internet content
provider icon, then press
Press X/x to select a DLNA server, then
press
.
.
When the Internet content list has not been
retrieved, it will be represented by an
unacquired icon or a new icon.
The file list or folder list appears.
Playing the same audio in
different rooms (PARTY
STREAMING)
To use the control panel
The control panel appears when the video file
starts playing. The displayed items may differ
depending on Internet content providers.
To display again, press DISPLAY.
Note
TV screen, this function may be available via a future
update. However, the function may not be available
in some regions/countries.
A
B
Control display
Press C/X/x/c or
for playback operations.
Playing status bar
Status bar, cursor indicating the current
position, playing time, duration of the video
file
C
D
The next video file name
The currently selected video file name and
rating
You can play the same audio at the same time
across all Sony components which are
compatible with the PARTY STREAMING
function.
GB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
The component that plays audio for the party
through the use of [Start Party] is called the
“party host.” A component that is invited to the
party from the party host and plays the same
audio as the party host is called a “party guest.”
To close a party
For the party host
Press x, then press HOME.
For a party guest
Press OPTIONS, press X/x to select [Close
To start a party
Party], then press
.
(for the party host only)
To leave from a party
(for a party guest only)
You can use other components to play the
content that is playing on the system.
Press OPTIONS, press X/x to select [Leave
1
Turn on the system and other Sony
components compatible with the
PARTY STREAMING function.
Party], then press
.
Note
• The sale and product lineup of products that are
compatible with the PARTY STREAMING function
differ depending on the area.
Make sure that each component is
connected to the network.
2
Press C/X/x/c to select the audio
content in
[Music] or a radio station.
Operating the system with a
DLNA controller (renderer)
For selecting a radio station, see “Listening
3
4
Press OPTIONS.
Note
Press X/x to select [Start Party], then
TV screen, this function may be available via a future
update. However, the function may not be available
in some regions/countries.
press
.
All party guests’ components start playing
the same audio content as the party host.
To join in a party
(for a party guest only)
You can operate the system with a DLNA
controller.
For details of operation, see the operating
instructions of the DLNA controller.
You can use the system to play the content that
is playing on other components.
Note
1
Turn on the system and other Sony
components compatible with the
PARTY STREAMING function.
• Do not operate the system with the supplied remote
when operating the system by the DLNA controller.
Tip
Make sure that each component is
connected to the network.
• The system is compatible with the “Play To” function
of Windows Media Player 12 that comes standard
®
2
Start a party on another networked
component.
with Windows 7.
3
4
Press C/c to select
[Music].
Press X/x to select
[Party], then
press
Press X/x to select the party host that
you set up in Step 2, then press
.
5
.
GB
33
Download from Www.Somanuals.com. All Manuals Search And Download.
[Video] only
Available Options
Various settings and playback operations are
available by pressing OPTIONS. The available
items differ depending on the situation.
Items
Details
[3D Output Setting] Sets whether or not to output
3D video automatically.
[Video Settings]
• [Picture Quality Mode]:
Selects the picture settings
for different lighting
environments.
Common options
• [FNR]: Reduces the random
noise appearing in the
picture.
Items
Details
[Playback History]
Displays titles/tracks in the
playback history of a
• [BNR]: Reduces the
mosaic-like block noise in
the picture.
BD-ROM/DVD-ROM/
CD-DA (music CD) using
Gracenote technology.
• [MNR]: Reduces minor
noise around the picture
outlines (mosquito noise).
[Search History]
[Search Contents]
Searches for related
information based on
keywords from Gracenote via
the Information Display.
[Play/Pause]
[Top Menu]
Starts or pauses playback.
Displays the BD’s or DVD’s
Top Menu.
Searches for BRAVIA
Internet Video content based
on keywords from Gracenote
via the Information Display .
[Menu/Popup Menu] Displays the BD-ROM’s
Pop-up Menu or DVD’s
menu.
[Repeat Setting]
[Favourites List]
[Play/Stop]
Sets the repeat play.
[Title Search]
Searches for a title on BD-
ROMs/DVD VIDEOs and
starts playback from the
beginning.
Displays the Favorites List.
Starts or stops playback.
[Play from start]
Plays the item from the
beginning.
[Chapter Search]
[Angle]
Searches for a chapter and
starts playback from the
beginning.
[Information Display] Displays information on the
BD-ROM/DVD-ROM/
CD-DA (music CD) by using
Gracenote technology.
Switches to other viewing
angles when multi-angles are
recorded on BD-ROMs/DVD
VIDEOs.
[Add to Favourites]
Adds an Internet content to
the Favorites List.
[Remove from
Favourites]
Erases an Internet content
from the Favorites List.
[Music] only
[Start Party]
Starts a party with the
selected source.
Items
Details
This item may not appear
depending on the source.
[Add Slideshow
BGM]
Registers music files in the
USB memory as slideshow
background music.
[Leave Party]
Leaves from a party which
the system is participating in.
The PARTY STREAMING
function continues among
other participating devices.
[Close Party]
Closes a party which the
system is participatingin. The
PARTY STREAMING
function ends for all other
participating devices.
GB
34
Download from Www.Somanuals.com. All Manuals Search And Download.
[Photo] only
Adjusting the delay between
the picture and sound
(A/V SYNC)
Items
Details
[Slideshow]
Starts a slideshow.
Changes the slideshow speed.
[Slideshow Speed]
[Slideshow Effect]
Sets the effect when playing a
slideshow.
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
[Slideshow BGM]
• [Off]: Turns off the
function.
• [My Music from USB]: Sets
the music files registered in
[Add Slideshow BGM]. If
no music file is registered,
[(Not registered)] is
displayed.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “A/V SYNC”
appears in the front panel display, then
press
or c.
3
Press X/x to adjust the delay between
the picture and sound.
• [Play from disc]: Sets the
tracks on CD-DAs (music
CDs).
You can adjust from 0 ms to 300 ms in 25
ms increments.
[Rotate Left]
Rotates the photo
counterclockwise by
90 degrees.
4
Press
.
The setting is made.
[Rotate Right]
[View Image]
Rotates the photo clockwise
by 90 degrees.
5
Press SYSTEM MENU.
Displays the selected picture.
The system menu turns off.
Note
• Depending on the input stream, A/V SYNC may not
be effective.
GB
35
Download from Www.Somanuals.com. All Manuals Search And Download.
• When changing the sound mode while using the
S-AIR receiver, sound from the S-AIR receiver may
skip.
Sound Adjustment
• When you play a Super Audio CD, this function does
not work.
Selecting the Effect to
Suit the Source
Selecting the Audio
Format, Multilingual
Tracks, or Channel
When the system is playing a BD/DVD VIDEO
or DATA CD/DATA DVD (DivX video files)
recorded in multiple audio formats (PCM,
Dolby Digital, MPEG audio, or DTS) or
multilingual tracks, you can change the audio
format or language.
You can select a suitable sound mode for movies
or music.
1
4
7
2
5
8
0
3
6
9
SOUND
MODE
With a CD, you can select the sound from the
right or left channel and listen to the sound of the
selected channel through both the right and left
speakers.
Press SOUND MODE repeatedly during
playback until the desired mode appears in
the front panel display.
1
4
7
2
5
8
0
3
6
9
• “AUTO”: The system selects “MOVIE” or
“MUSIC” automatically to produce the sound
effect depending on the disc or sound stream.
• “MOVIE”: The system provides the sound for
movies.
• “MUSIC”: The system provides the sound for
music.
• “SPORTS”: The system adds reverberation for
sports programs.
• “NEWS”: The system provides the sound for
voice programs, such as news.
Press
repeatedly during playback to
select the desired audio signal.
• “GAME ROCK”: The system provides the
sound for music/rhythm games.
The audio information appears on the TV
screen.
Note
• Depending on the disc or source, when you select
“AUTO,” the beginning of the sound may be cut off
as the system selects the optimum mode
automatically. To avoid cutting the sound, select
other than “AUTO.”
x BD/DVD VIDEO
Depending on the BD/DVD VIDEO, the choice
of language varies.
When 4 digits are displayed, they indicate a
language code. See “Language Code List”
(page 73) to confirm which language the code
represents. When the same language is
• Depending on the input stream, the sound mode may
not be effective.
GB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
displayed two or more times, the BD/DVD
VIDEO is recorded in multiple audio formats.
1
4
7
2
5
8
0
3
6
9
x DVD-VR
The types of sound tracks recorded on a disc are
displayed.
Example:
• [ Stereo]
• [ Stereo (Audio1)]
• [ Stereo (Audio2)]
• [ Main]
• [ Sub]
• [ Main/Sub]
Note
• [ Stereo (Audio1)] and [ Stereo (Audio2)] do not
appear when only one audio stream is recorded on the
disc.
Press
repeatedly until the desired
signal appears in the front panel display.
• “MAIN”: Sound of the main language will be
output.
x DATA CD (DivX video file)/DATA DVD
(DivX video file)
The choice of DATA CD or DATA DVD audio
signal formats differs, depending on the DivX
video file contained on the disc. The format
appears on the TV screen.
• “SUB”: Sound of the sub language will be
output.
• “MAIN/SUB”: Mixed sound of both the main
and sub languages will be output.
x CD
• [ Stereo]: The standard stereo sound.
• [ 1/L]: The sound of the left channel
(monaural).
Using the Sound Effect
• [ 2/R]: The sound of the right channel
(monaural).
1
4
7
2
5
8
0
3
6
9
SYSTEM
MENU
Enjoying Multiplex
Broadcast Sound
(DUAL MONO)
C/X/x/c,
You can enjoy multiplex broadcast sound when
the system receives or plays a Dolby Digital
multiplex broadcast signal.
Note
• To receive the Dolby Digital signal, you need to
connect a TV or other component to the unit with a
TV is compatible with the Audio Return Channel
signal via an HDMI cable.
Enjoying sound at low volume
You can enjoy sound effects or dialog, as you
would in a movie theater, even at low volume. It
is useful for watching movies at night.
1
Press SYSTEM MENU.
GB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press X/x repeatedly until “NIGHT
MODE” appears in the front panel
display, then press
or c.
Press X/x to select a setting.
• “NIGHT ON”: On.
• “NIGHT OFF”: Off.
4
Press SYSTEM MENU.
The system menu turns off.
Note
• When sound is output from the center speaker, this
effect is more pronounced, as speech (movie dialog,
etc.) is easy to hear. When sound is not output from
the center speaker, the system optimally adjusts the
volume.
Reinforcing bass frequencies
You can reinforce bass frequencies.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “D.BASS”
appears in the front panel display, then
press
or c.
3
4
Press X/x to select a setting.
• “D.BASS ON”: On.
• “D.BASS OFF”: Off.
Press SYSTEM MENU.
The system menu turns off.
GB
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual tuning
Press TUNING +/– repeatedly.
Tuner
3
Adjust the volume by pressing 2 +/–.
Listening to the Radio
You can enjoy radio sound with the system’s
If an FM program is noisy
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
speakers.
1
2
Press SYSTEM MENU.
"/1
1
4
7
2
5
8
0
3
6
9
Press X/x repeatedly until “FM MODE”
appears in the front panel display.
Number
buttons
SYSTEM
MENU
D.TUNING
C/X/x/c,
3
4
Press
or c.
HOME
PRESET +/–
FUNCTION
Press X/x to select “MONO.”
• “STEREO”: Stereo reception.
• “MONO”: Monaural reception.
TUNING +/–
x
2 +/–
5
Press SYSTEM MENU.
The system menu turns off.
Current station
Current band and preset number
To turn off the radio
Press "/1.
FM
7
Presetting radio stations
88.00 MHz
SONY FM
You can preset up to 20 stations. Before tuning,
make sure to turn down the volume to minimum.
1
Press FUNCTION repeatedly until
“TUNER FM” appears in the front panel
display.
Station name (European and
Russian models only)
2
Press and hold TUNING +/– until the
auto scanning starts.
1
2
Press FUNCTION repeatedly until
“TUNER FM” appears in the front panel
display.
Scanning stops when the system tunes in a
station.
Select the radio station.
3
4
Press SYSTEM MENU.
Automatic tuning
Press X/x repeatedly until “MEMORY”
appears in the front panel display, then
Press and hold TUNING +/– until the auto
scanning starts.
[Auto Tuning] appears on the TV screen.
Scanning stops when the system tunes in a
station.
press
or c.
A preset number appears in the front panel
display.
To stop the automatic tuning manually,
press TUNING +/– or x.
GB
39
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press X/x to select the preset number
you want.
1
Press FUNCTION repeatedly until
“TUNER FM” appears in the front panel
display.
2
3
Press D.TUNING.
Press the number buttons to select the
frequencies.
Tip
• You can select the preset number directly by
pressing the number buttons.
4
Press
.
Press
.
“COMPLETE” appears in the front panel
display, and the station is stored.
Using the Radio Data
7
8
Repeat Steps 2 to 6 to store other
stations.
System (RDS)
(European and Russian models only)
Press SYSTEM MENU.
The system menu turns off.
To change the preset number
What is the Radio Data
System?
Select the desired preset number by pressing
PRESET +/–, then perform the procedure from
Step 3.
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
The station name appears on the TV screen as
well.
Selecting the preset station
1
Press FUNCTION repeatedly until
“TUNER FM” appears in the front panel
display.
The last received station is tuned in.
Receiving RDS broadcasts
2
Press PRESET +/– repeatedly to select
the preset station.
Simply select a station from the FM band.
The preset number and frequency appear on
the TV screen and front panel display.
Each time you press the button, the system
tunes in one preset station.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
Tip
• You can select the preset station number directly
by pressing the number buttons.
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
Selecting a radio station by
inputting a frequency directly
• Not all FM stations provide RDS service, nor do they
provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
When you know the frequencies, you can select
radio stations by inputting the frequencies
directly.
Tip
• While receiving an RDS broadcast and pressing
DISPLAY, you can change between the station name
and frequency in the front panel display.
GB
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
• When you insert the wireless transmitter/transceiver,
make sure that the AC power cord (mains lead) is not
connected to a wall outlet (mains).
• Do not touch the terminals of the wireless transmitter/
transceiver.
External Audio Device
Using an S-AIR Product
When you purchase the S-AIR product, you
need to perform the following settings to
activate wireless transmission.
To insertthe wireless transmitter
into the unit
1
Remove the screws directly below the
mark.
About S-AIR products
There are two types of S-AIR product.
• S-AIR main unit (this unit): This is for
transmitting sound. You can use up to three
S-AIR main units. (The number of usable
S-AIR main units depends on the use
environment.)
Rear of the unit
EZW-T100
• S-AIR sub unit: This is for receiving sound.
– Surround amplifier (optional): You
can enjoy surround speaker sound
wirelessly.
-T100
EZW
– S-AIR receiver (optional): You can
enjoy system sound in another room.
Room A
Note
S-AIR main unit
• Remove the screws that are indicated in the
illustration. Do not remove other screws.
2
Insert the wireless transmitter.
Rear of the unit
EZW-T100
S-AIR sub unit
(surround amplifier)
Room B
-T100
EZW
S-AIR sub unit
(S-AIR receiver)
(not supplied)
Inserting the wireless
transmitter/transceiver
Note
• Insert the wireless transmitter with the S-AIR
logo facing up.
• Insert the wireless transmitter so that the V
marks are aligned.
To make use of the S-AIR function, you need to
insert the wireless transmitter into the unit and
the wireless transceiver into the S-AIR sub unit.
• Do not insert anything other than the wireless
transmitter into the EZW-T100 slot.
GB
41
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Make sure to use the same screws to
secure the wireless transmitter.
3
4
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [S-AIR Settings],
then press
[Setup].
.
Rear of the unit
5
.
EZW-T100
The [S-AIR Settings] display appears.
6
7
Press X/x to select [ID], then press
.
Press X/x to select the desired ID.
You can select any ID (A, B, or C).
8
9
Press
.
The setting is made.
Set the S-AIR sub unit to the same ID.
Wireless transmission is activated as
follows (example):
Note
• Do not use other screws to fasten the wireless
transmitter.
ID A
To insert the wireless
transceiver into the S-AIR sub
unit
For details on installing the wireless transceiver
into the S-AIR sub unit, such as a surround
amplifier or S-AIR receiver, see the operating
instructions of the S-AIR sub unit.
ID A
ID A
Tip
• When you change the S-AIR configuration, Sony
recommends that you perform [Auto Calibration].
For details, see “Calibrating the Appropriate Settings
To set the ID of the surround
amplifier
Refer to the operating instructions of the
surround amplifier.
Setting the S-AIR ID to activate
wireless transmission
For the surround amplifier
For the S-AIR receiver
To set the ID of the S-AIR
receiver
Refer to the operating instructions of the S-AIR
receiver.
To enjoy a 7.1 channel system
Simply by matching the ID of the unit and the
S-AIR sub unit, you can activate wireless
transmission.
You can enjoy the more realistic surround sound
effect of 7.1 channels when you use the Wireless
Surround Speaker Kit (WAHT-SBP2, optional).
For details, refer to the operating instructions of
the Wireless Surround Speaker Kit.
To set the ID of the unit
1
Press "/1 on the unit.
In this case, set [Surround Back] in [Speaker
The system turns on.
2
Press HOME.
The home menu appears on the TV screen.
GB
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying the system’s sound in
another room
Enjoying the S-AIR receiver
while the unit is in standby
mode
For the S-AIR receiver
For the S-AIR receiver
You can enjoy the system’s sound in another
room by using the S-AIR receiver.
You can enjoy the S-AIR receiver while the unit
is in standby mode by setting [Standby] to [On].
1
Press HOME.
The home menu appears on the TV screen.
1
Press HOME.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [S-AIR Settings],
then press
[Setup].
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [S-AIR Settings],
then press
[Setup].
.
4
.
.
4
The [S-AIR Settings] display appears.
.
5
6
Press X/x to select [Mode], then press
The [S-AIR Settings] display appears.
.
5
6
Press X/x to select [Standby], then
Press X/x to select the desired setting.
press
.
• [Party]: The S-AIR receiver outputs
sound according to functions set on the
unit.
Press X/x to select the desired setting.
• [On]: You can enjoy the S-AIR receiver
while the unit is in standby mode or turned
on. The power consumption during
standby mode increases.
• [Off]: You cannot enjoy the S-AIR
receiver while the unit is in standby mode.
• [Separate]: You can set the desired
function for the S-AIR receiver while unit
functions do not change.
7
8
Press
.
The setting is made.
7
Press
.
When you select [Separate] in Step 6,
press S-AIR CH on the S-AIR receiver
to select the function.
The setting is made.
Note
• When you turn the system off while [Standby] is set
to [On], “S-AIR” flashes (when wireless transmission
between the unit and S-AIR receiver is not activated),
or lights up (when wireless transmission between the
unit and S-AIR receiver is activated) in the front
panel display.
The S-AIR receiver’s function changes as
follows.
“MAIN UNIT” t “TUNER FM” t
“AUDIO” t …
To enjoy the same function as the unit,
select “MAIN UNIT.”
9
Adjust the volume on the S-AIR
receiver.
GB
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Refer to the operating instructions of the
S-AIR receiver.
Identifying the unit with a
specific S-AIR sub unit
(Pairing operation)
9
Press C/c to select [Start], then press
.
The unit starts pairing.
For the surround amplifier
For the S-AIR receiver
The PAIRING indicator of the surround
amplifier flashes when pairing starts.
When wireless transmission is activated,
the PAIRING indicator of the surround
amplifier turns on.
When using S-AIR products, neighbors may
also receive your system’s sound if IDs are the
same, or you may receive sound from neighbors.
To prevent this, you can identify the unit with a
specific S-AIR sub unit by performing the
pairing operation.
When you perform pairing, wireless
transmission is activated between the paired
main unit and S-AIR sub unit only.
To cancel pairing, select [Cancel].
Note
• Perform pairing within several minutes of Step
9. If you do not, [Pairing failed. Retry?] appears
on the TV screen. To continue pairing, select
[OK] and press , then start again from Step 8.
To cancel pairing, select [Cancel].
1
2
Place the S-AIR sub unit that you want
to pair near the unit.
To cancel pairing
Change the ID of the main and sub unit
Match the IDs of the unit and the S-AIR
sub unit.
• To set the ID of the unit, see “To set the ID
If wireless transmission is
unstable
For the surround amplifier
For the S-AIR receiver
• To set the ID of the surround amplifier,
refer to the operating instructions of the
surround amplifier.
• To set the ID of the S-AIR receiver, refer
to the operating instructions of the S-AIR
receiver.
If you use multiple wireless systems, such as
wireless LAN or Bluetooth, the transmission of
S-AIR signals or other wireless signals may be
unstable. In this case, the transmission may be
improved by changing the following [RF
Change] setting.
3
Press HOME.
The home menu appears on the TV screen.
4
5
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [S-AIR Settings],
then press
[Setup].
.
1
Press HOME.
The home menu appears on the TV screen.
6
.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [S-AIR Settings],
then press
[Setup].
The [S-AIR Settings] display appears.
7
8
Press X/x to select [Pairing], then
.
press
.
4
Start pairing of the S-AIR sub unit.
.
The [S-AIR Settings] display appears.
x For the surround amplifier
Refer to the operating instructions of the
surround amplifier.
5
6
Press X/x to select [RF Change], then
press
Press X/x to select the desired setting,
then press
.
x For the S-AIR receiver
.
GB
44
Download from Www.Somanuals.com. All Manuals Search And Download.
• [Auto]: Normally select this. The system
changes [RF Change] to [On] or [Off]
automatically.
• [On]: The system transmits sound by
searching for the better channel for
transmitting.
• [Off]: The system transmits sound by
fixing the channel for transmitting.
7
8
Press
.
The setting is made.
When you set [RF Change] to [Off],
select the ID so that wireless
transmission is most stable (page 42).
Note
• In most cases, you will not need to change this
setting.
– If [RF Change] is set to [Off], transmission
between the unit and S-AIR sub unit can be
performed using one of the following channels.
– S-AIR ID A: equivalent channel for IEEE
802.11b/g channel 1
– S-AIR ID B: equivalent channel for IEEE
802.11b/g channel 6
– S-AIR ID C: equivalent channel for IEEE
802.11b/g channel 11
• The transmission may be improved by changing the
transmission channel (frequency) of the other
wireless system(s). For details, refer to the operating
instructions of the other wireless system(s).
GB
45
Download from Www.Somanuals.com. All Manuals Search And Download.
• The Control for HDMI function may not work if you
connect other than a Sony component, even if the
component is compatible with the Control for HDMI
function.
Other Operations
Using the Control for
HDMI Function for
“BRAVIA” Sync
This function is available on TVs with the
“BRAVIA” Sync function.
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified as
below:
Preparing for the Control for
HDMI function
(Control for HDMI - Easy Setting)
If your TV is compatible with the Control for
HDMI - Easy Setting function, you can set the
system’s [Control for HDMI] function
automatically by setting the TV. For details,
refer to the operating instructions of the TV.
If the TV is not compatible with the Control for
HDMI - Easy Setting function, set the Control
for HDMI function of the system and TV
manually.
Note
• For details on setting the TV, refer to the operating
instructions of the TV.
1
2
3
Make sure that the system and the TV
are connected with an HDMI cable.
Turn on the TV and press [/1 to turn on
the system.
Control for HDMI is a mutual control function
standard used by CEC (Consumer Electronics
Control) for HDMI (High-Definition
Multimedia Interface).
Set the Control for HDMI function of the
system and TV.
The Control for HDMI function for the
system and TV is simultaneously set to on.
The Control for HDMI function will not work
when you connect this system to a component
which is not compatible with the Control for
HDMI function.
To set the [Control for HDMI]
function of the system to on/off
manually
There are convenient buttons on the system’s
remote for operating the TV, such as
THEATRE, ONE-TOUCH PLAY, and TV "/1.
refer to the operating instructions of the TV.
1
Press HOME.
The home menu appears on the TV screen.
2
3
Press C/c to select
Press X/x to select [System Settings],
then press
Press X/x to select [HDMI Settings],
then press
[Setup].
.
ONE-TOUCH TV
THEATRE
PLAY
4
BRAVIA Sync
.
1
2
3
The [HDMI Settings] display appears.
Note
5
Press X/x to select [Control for HDMI],
• Depending on the connected component, the Control
for HDMI function may not work. Refer to the
operating instructions supplied with the component.
then press
.
GB
46
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Press X/x to select the setting, then
press
.
Enjoying TV sound from the
speakers in this system
• [On]: On.
• [Off]: Off.
(System Audio Control)
You can simplify operation to enjoy TV sound
via this system.
To use this function, connect the system and the
TV with an audio cord and an HDMI cable
Turning the system off in sync
with the TV
(System Power Off)
When you turn the TV off by using the POWER
button on the TV’s remote or TV "/1 on the
system’s remote, the system turns off
automatically.
You can use the System Audio Control function
as follows:
• When the system is turned on, TV sound can
be output from the speakers of the system.
• When TV sound is output from the speakers of
the system, you can change the output method
to the speakers of the TV via the TV menu.
• When TV sound is output from the speakers of
the system, you can adjust the volume and turn
off the sound of the system using the TV
remote.
Note
• This function depends on the settings of your TV. For
details, refer to the operating instructions of the TV.
Watching BD/DVD by a single
button press
(One-Touch Play)
Note
• While the TV is in PAP (picture and picture) mode,
the System Audio Control function will not work.
• Depending on the TV, when you adjust the unit's
volume, the volume level appears on the TV screen.
In this case, the volume level that appears on the TV
screen and the unit's front panel display may differ.
Press ONE-TOUCH PLAY.
The system and your TV turn on, your TV’s
input is set to the HDMI input to which the
system is connected, and the system starts
playing a disc automatically.
The System Audio Control function is also
activated automatically.
Setting the Maximum Volume
Level of the System
Also, when you insert a disc, One-Touch Play is
enabled. If One-Touch Play does not start (in the
case of inserting a disc that is not compatible
with the auto playback function), press
FUNCTION repeatedly to select “BD/DVD”
and press N or ONE-TOUCH PLAY.
(Volume Limit)
When the System Audio Control function is
activated, loud sound may be output depending
on the volume level of the system. You can
prevent this by limiting the maximum level of
the volume. For details, see [Volume Limit]
Using the Theatre Mode
(Theatre Mode)
Press THEATRE.
Receiving the digital audio
signal of the TV
If your TV is compatible with the Theatre Mode,
you can enjoy optimal image and sound quality
suited for movies, and the System Audio Control
function is activated automatically.
(Audio Return Channel)
The system can receive the digital audio signal
of the TV via an HDMI cable when your TV is
GB
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press X/x to select [Auto Calibration],
then press
compatible with the Audio Return Channel
function. You can enjoy TV sound via the
system by using just one HDMI cable. For
.
The confirmation display for [Auto
Calibration] appears.
Connect the calibration mic to the
A.CAL MIC jack on the rear panel.
Operating the system via the
TV remote
Set up the calibration mic at ear level using
a tripod, etc. (not supplied). The front of
each speaker should face the calibration
mic, and there should be no obstruction
between the speakers and the calibration
mic.
(Remote Easy Control)
You can control the basic functions of the
system via the TV remote when the system’s
video output is displayed on the TV screen. For
details, refer to the operating instructions of the
TV.
Changing the language for the
on-screen display of the TV
IC
L
M
A
C
.
A
2
C
-A
M
C
E
(Language Follow)
When you change the language for the on-screen
display of the TV, the system’s on-screen
display language is also changed after turning
the system off and on.
Calibration mic
Calibrating the
Appropriate Settings
Automatically
[Auto Calibration]
D. C. A. C. (Digital Cinema Auto Calibration)
can set the appropriate surround sound
automatically.
6
7
Press X/x to select [OK].
To cancel, select [Cancel].
Note
Press
.
• The system outputs a loud test sound when [Auto
Calibration] starts. You cannot turn the volume
down. Give consideration to children and neighbors.
[Auto Calibration] starts.
The system adjusts the speaker settings
automatically.
1
Press HOME.
Be quiet during the measurement.
The home menu appears on the TV screen.
Note
2
3
Press C/c to select
Press X/x to select [Audio Settings],
then press
[Setup].
• Before [Auto Calibration], make sure that the
surround amplifier turns on and you install the
surround amplifier in the appropriate location. If
you install the surround amplifier in an improper
.
GB
48
Download from Www.Somanuals.com. All Manuals Search And Download.
location, such as another room, proper
measurement will not be obtained.
1
Press HOME.
The home menu appears on the TV screen.
• When you use the Wireless Surround Speaker
Kit (WAHT-SBP2, optional) for the surround
appropriate location and turn the surround
amplifier on. To use the surround back speakers,
set [Surround Back] in [Speaker Settings] to
[Yes] (page 49)
2
3
Press C/c to select
Press X/x to select [Audio Settings],
then press
Press X/x to select [Speaker Settings],
then press
[Setup].
.
4
.
The [Speaker Settings] display appears.
8
Confirm the conclusions of [Auto
Calibration].
5
Press X/x to select the item, then press
The speakers connected to the unit are listed
as [Yes] on the TV screen.
.
Check the following settings.
Note
• If measurement fails, follow the message then
retry [Auto Calibration].
x [Connection]
If you do not connect center or surround
speakers, set the parameters for [Center] and
[Surround]. Since the front speaker and
subwoofer settings are fixed, you cannot change
them.
• The measurement for [Subwoofer] is always
[Yes] and [Speaker Settings] returns to the
default setting when you perform [Auto
Calibration].
9
Press X/x to select [OK] or [Cancel],
When you use the Wireless Surround Speaker
Kit (WAHT-SBP2, optional) for the surround
also.
then press
.
x The measurement is OK.
Disconnect the calibration mic, then select
[OK]. The result is implemented.
[Front]
[Yes]
x The measurement is not OK.
Follow the message, then select [OK] to
retry.
[Center]
[Yes]: Normally select this.
[None]: Select this if no center speaker is used.
Note
• While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
[Surround]
[Yes]: Normally select this.
[None]: Select this if no surround speaker is
used.
– do not change the volume.
– do not change the function.
– do not change the disc.
[Surround Back]
[Yes]: Select this if surround back speakers are
used.
[None]: Select this if no surround back speakers
is used.
– do not insert a disc.
– do not disconnect the calibration mic.
[Subwoofer]
[Yes]
Setting the Speakers
[Speaker Settings]
x [Distance]
When you move the speakers, be sure to set the
parameters of the distance (A) from the
listening position to the speakers.
You can set the parameters from 0.0 to 7.0
meters.
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
GB
49
Download from Www.Somanuals.com. All Manuals Search And Download.
The speakers in the illustration correspond to the
following:
[Surround Back Left/Right]* 0.0 dB: Set the
surround back speaker level.
1Center speaker
2Front left speaker (L)
3Front right speaker (R)
[Subwoofer] 0.0 dB: Set the subwoofer level.
* This item appears when you set it to [Yes] in the
[Connection] setting.
4Subwoofer
5Surround left speaker (L)
6Surround right speaker (R)
7Surround back left speaker (L) (optional)
8Surround back right speaker (R) (optional)
x [Test Tone]
The speakers will emit a test tone to adjust
[Level].
[Off]: The test tone is not emitted from the
speakers.
1
2
3
[On]: The test tone is emitted from each speaker
in sequence while adjusting level. When you
select one of the [Speaker Settings] items, the
test tone is emitted from each speaker in
sequence.
4
A
Adjust the sound level as follows.
5
6
1
2
Set [Test Tone] to [On].
Press X/x to select [Level], then press
.
A
7
8
3
4
Press X/x to select the desired speaker
type, then press
.
[Front Left/Right] 3.0 m: Set the front speaker
distance.
[Center]* 3.0 m: Set the center speaker distance.
[Surround Left/Right]* 3.0 m: Set the surround
speaker distance.
[Surround Back Left/Right]* 3.0 m: Set the
surround back speaker distance.
[Subwoofer] 3.0 m: Set the subwoofer distance.
* This item appears when you set it to [Yes] in the
[Connection] setting.
Press C/c to select the left or right
speaker, then press X/x to adjust the
level.
5
6
7
Press
.
Repeat Steps 3 to 5.
Press RETURN.
The system returns to the previous display.
8
Press X/x to select [Test Tone], then
press
.
Note
• Depending on the input stream, [Distance] may not
be effective.
9
Press X/x to select [Off], then press
.
Note
x [Level]
• The test tone signals are not output from the HDMI
OUT jack.
You can adjust the sound level of the speakers.
You can set the parameters from –6.0 dB to +6.0
dB. Be sure to set [Test Tone] to [On] for easy
adjustment.
Tip
• To adjust the volume of all the speakers at one time,
press 2 +/–.
[Front Left/Right] 0.0 dB: Set the front speaker
level.
[Center]* 0.0 dB: Set the center speaker level.
[Surround Left/Right]* 0.0 dB: Set the surround
speaker level.
GB
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
The time can be preset in intervals of 10
minutes.
Controlling Your TV with
the Supplied Remote
By adjusting the remote signal, you can control
your TV with the supplied remote.
Note
Press SLEEP.
• When you replace the batteries of the remote, the
code number may reset itself to the default (SONY)
setting. Reset the appropriate code number.
Each time you press SLEEP, the minutes display
(the remaining time) changes by 10 minutes.
When you set the sleep timer, “SLEEP” flashes
in the front panel display.
Preparing the remote for
controlling the TV
To check the remaining time
Press SLEEP once.
To change the remaining time
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons. Then release TV
[/1.
Press SLEEP repeatedly to select the desired
time.
If the setting is unsuccessful, the currently
registered code is not changed. Re-enter the
code number.
Deactivating the Buttons
on the Unit
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find the
code that works with your TV.
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
Manufacturer
SONY
Code number
01 (default)
02, 08
05
Press x on the unit for more than 5
seconds.
SAMSUNG
LG
“CHILD LOCK” and “ON” appear in the front
panel display.
The child lock function is activated and the
buttons on the unit are locked. (You can operate
the system by using the remote.)
PHILIPS
02, 03, 07
06
PANASONIC
TOSHIBA
04
To cancel, press x for more than 5 seconds so
that “CHILD LOCK” and “OFF” appear in the
front panel display.
Saving Power in Standby
Mode
Note
• When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
Check that the following settings are made:
– [Control for HDMI] in [HDMI Settings] is set
– [Standby] in [S-AIR Settings] is set to [Off]
GB
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Icon
Explanation
Makes the audio settings
Settings and Adjustments
according to the type of
connecting jacks.
Using the Setup Display
You can make various adjustments of items such
Makes detailed settings for BD/
as picture and sound.
DVD playback.
Select
(Setup) on the home menu when you
Makes detailed settings for the
need to change the settings of the system.
The default settings are underlined.
Parental Control function.
Note
Makes detailed settings for
Super Audio CD playback.
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
Makes the system-related
settings.
1
2
Press HOME.
The home menu appears on the TV screen.
Makes detailed settings for
Internet and network.
Press C/c to select
[Setup].
Re-runs the Easy Setup to make
the basic settings.
Resets the system to the factory
settings.
3
Press X/x to select the setup category
[Network Update]
You can update and improve the functions of the
icon to change, then press
.
Example: [Screen Settings]
system.
For information about update functions, refer to
the following website:
Setup
TV Type
Set the screen aspect ratio of your TV.
For customers in Europe and Russia
Screen Format
Original
DVD Aspect Ratio
Cinema Conversion Mode
Letter Box
Auto
For customers in Asia and Australia
You can setup the following options.
Icon
Explanation
Updates the software of the
system.
Makes the screen settings
according to the type of
connecting jacks.
GB
52
Download from Www.Somanuals.com. All Manuals Search And Download.
x [Output Video Format]
[Screen Settings]
[HDMI]: Normally select [Auto]. Select
[Original Resolution] to output the resolution
recorded on the disc. (When the resolution is
lower than SD resolution, it is scaled up to SD
resolution.)
[Component Video]: Select the resolution that
suits your TV.
[Video]: Automatically sets the lowest
resolution.
x [3D Output Setting]
[Auto]: Normally select this.
[Off]: Select this to display all contents in 2D.
x [TV Screen Size Setting for 3D]
Sets the screen size of your 3D compatible TV.
Note
x [TV Type]
• When connecting the HDMI OUT jack and other
video output jacks at the same time, select
[Component Video].
[16:9]: Select this when connecting to a wide-
screen TV or a TV with a wide-mode function.
[4:3]: Select this when connecting to a 4:3
screen TV without a wide-mode function.
• If no picture appears when setting [HDMI] or
[Component Video] resolution, try another resolution
setting.
x [Screen Format]
[Original]: Select this when connecting to a TV
with a wide-mode function. Displays a 4:3
screen picture in 16:9 aspect ratio even on a
wide-screen TV.
[Fixed Aspect Ratio]: Changes the picture size
to fit the screen size with the original picture
aspect ratio.
x [BD/DVD-ROM 1080/24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz video
signals only when connecting a 1080/24p-
compatible TV using the HDMI OUT jack.
[Off]: Select this when your TV is not
compatible with 1080/24p video signals.
x [YCbCr/RGB (HDMI)]
x [DVD Aspect Ratio]
[Letter Box]: Displays a wide picture with black
bands on the top and bottom.
[Auto]: Automatically detects the type of
external device, and switches to the matching
color setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video
signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video
signals.
[RGB]: Select this when connecting to a device
with an HDCP-compliant DVI jack.
[Pan & Scan]: Displays a full-height picture on
the entire screen, with trimmed sides.
x [HDMI Deep Colour Output]
[Auto]: Normally select this.
[12bit], [10bit]: Outputs 12bit/10bit video
signals when the connected TV is compatible
with Deep Colour.
[Off]: Select this when the picture is unstable or
colors appear unnatural.
x [Cinema Conversion Mode]
[Auto]: Normally select this. The unit
automatically detects whether the material is
video-based or film-based, and switches to the
appropriate conversion method.
x [Pause Mode] (BD/DVD VIDEO/DVD-R/
DVD-RW only)
[Auto]: The picture, including subjects that
move dynamically, is output with no jitter.
Normally select this position.
[Video]: The conversion method suited for
video-based material will always be selected
regardless of the material.
GB
53
Download from Www.Somanuals.com. All Manuals Search And Download.
[Frame]: The picture, including subjects that do
not move dynamically, is output in high
resolution.
[HDMI]: Outputs sound from the HDMI OUT
jack only. Sound format depends on the
connected component.
Note
• When you set [Audio Output] to [HDMI], the
SOUND MODE, “D.BASS,” “NIGHT MODE,” and
“SUR.SETTING” functions are disabled.
• When the System Audio Control function (page 47)
is activated, this setting may change automatically.
[Audio Settings]
x [BD Audio MIX Setting]
[On]: Outputs the audio obtained by mixing the
interactive audio and secondary audio to the
primary audio.
[Off]: Outputs the primary audio only. Select
this when outputting HD audio signals to an AV
receiver.
x [Sound Effect]
You can set the system’s sound effects (SOUND
MODE, “D.BASS,” “NIGHT MODE,” and
“SUR.SETTING”) to on/off.
[On]: Enables all of the system’s sound effects.
The upper limit of sampling frequency is set to
48 kHz.
x [Audio DRC]
You can compress the dynamic range of the
sound track.
[Off]: The sound effects are disabled. Select this
when you do not want to set the upper limit of
sampling frequency.
[Auto]: Performs playback at the dynamic range
specified by the disc (BD-ROM only).
[Off]: No compression of dynamic range.
[On]: The system reproduces the sound track
with the kind of dynamic range that the
recording engineer intended.
x [Speaker Settings]
To obtain the best possible surround sound, set
the speakers. For details, see “Setting the
x [Auto Calibration]
x [Attenuate - AUDIO]
You can calibrate the appropriate settings
automatically. For details, see “Calibrating the
Distortion may occur when you listen to a
component connected to the AUDIO (AUDIO
IN L/R) jacks. You can prevent distortion by
reducing the input level on the unit.
[On]: Attenuates the input level. The output
level is changed.
[Off]: Normal input level.
x [Audio Output]
The system cannot output multi-channel sound
from both the HDMI OUT jack and system’s
speakers simultaneously.
[Speaker]: Outputs multi-channel sound from
the system’s speakers only.
[Speaker + HDMI]: Outputs multi-channel
sound from the system’s speakers and 2-channel
linear PCM signals from the HDMI OUT jack.
GB
54
Download from Www.Somanuals.com. All Manuals Search And Download.
[BD/DVD Viewing
Settings]
[Parental Control
Settings]
You can make detailed settings for BD/DVD
playback.
x [Password]
Set or change the password for the Parental
Control function. A password allows you to set
a restriction on BD-ROM, DVD VIDEO, or
Internet video playback. If necessary, you can
differentiate the restriction levels for BD-ROMs
and DVD VIDEOs.
x [BD/DVD Menu]
You can select the default menu language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
x [Parental Control Area Code]
Playback of some BD-ROMs or DVD VIDEOs
can be limited according to the geographic area.
Scenes may be blocked or replaced with
different scenes. Follow the on-screen
x [Audio]
You can select the default track language for
BD-ROMs or DVD VIDEOs.
When you select [Original], the language given
priority in the disc is selected.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
instructions and enter your four-digit password.
x [BD Parental Control]
Playback of some BD-ROMs can be limited
according to the age of the users. Scenes may be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter your
four-digit password.
x [Subtitle]
You can select the default subtitle language for
BD-ROMs or DVD VIDEOs.
When you select [Select Language Code], the
display for entering the language code appears.
Enter the code for your language by referring to
x [DVD Parental Control]
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. Scenes may be blocked or
replaced with different scenes. Follow the on-
screen instructions and enter your four-digit
password.
x [BD Hybrid Disc Playback Layer]
[BD]: Plays BD layer.
x [Internet Video Parental Control]
Playback of some Internet videos can be limited
according to the age of the users. Scenes may be
blocked or replaced with different scenes.
Follow the on-screen instructions and enter your
four-digit password.
[DVD/CD]: Plays DVD or CD layer.
x [BD Internet Connection]
[Allow]: Normally select this.
[Do not allow]: Prohibits Internet connection.
x [BD Data Storage Options]
[Internal memory]: Selects the internal memory
to store BD data.
x [Internet Video Unrated]
[Allow]: Allows the playback of unrated
Internet videos.
[Block]: Blocks the playback of unrated Internet
videos.
[USB device (front)]: Selects the
on the front panel to store BD data.
[USB device (rear)]: Selects the
on the rear panel to store BD data.
(USB) port
(USB) port
GB
55
Download from Www.Somanuals.com. All Manuals Search And Download.
[Control for HDMI]
You can set the [Control for HDMI] function to
on/off.
[On]: On. You can operate mutually between
components that are connected with an HDMI
[Music Settings]
You can make detailed settings for Super Audio
CD playback.
cable.
[Off]: Off.
x [Super Audio CD Playback Layer]
[Super Audio CD]: Plays the Super Audio CD
layer.
[Audio Return Channel]
[CD]: Plays the CD layer.
This function is available when you connect the
system and TV that is compatible with the Audio
Return Channel function.
[Auto]: The system can receive the digital audio
signal of the TV automatically via an HDMI
cable.
x [Super Audio CD Playback Channels]
[DSD 2ch]: Plays the 2ch area.
[DSD Multi]: Plays the multi-channel area.
[Off]: Off.
Note
[System Settings]
You can make the system-related settings.
• This function is available only when [Control for
HDMI] is set to [On].
[Volume Limit]
x [OSD]
activated, loud sound may be output depending
on the volume level of the system. You can
prevent this by limiting the maximum level of
the volume when the System Audio Control
function activates.
[Level3]: Maximum volume level is set to 10.
[Level2]: Maximum volume level is set to 15.
[Level1]: Maximum volume level is set to 20.
[Off]: Off.
You can select your language for the system on-
screen displays.
x [S-AIR Settings]
You can set up the S-AIR settings. For details,
[ID]: You can set the ID of the system.
[Pairing]: You can pair the system and S-AIR
sub unit, such as a surround amplifier or S-AIR
receiver.
Note
• This function is available only when [Control for
HDMI] is set to [On].
[RF Change]: If wireless transmission is
unstable, set this function.
[Mode]: You can enjoy the system’s sound in
another room.
x [Quick Start Mode]
[Standby]: You can enjoy the S-AIR receiver
while the unit is in standby mode.
[On]: Shortens the startup time from standby
mode. You can operate the system quickly after
turning it on.
x [Dimmer]
[Off]: The default setting.
[Bright]: Bright lighting.
[Dark]: Low lighting.
x [Auto Standby]
[On]: Turns on the [Auto Standby] function.
When you do not operate the system for about
30 minutes, the system enters standby mode
automatically.
x [HDMI Settings]
By connecting Sony components that are
compatible with the Control for HDMI function
with an HDMI cable, operation is simplified.
For details, see “Using the Control for HDMI
[Off]: Turns off the function.
GB
56
Download from Www.Somanuals.com. All Manuals Search And Download.
x [Auto Display]
x [System Information]
[On]: Automatically displays information on the
screen when changing the viewing titles, picture
modes, audio signals, etc.
You can display the system’s software version
information and the MAC address.
[Off]: Displays information only when you
press DISPLAY.
[Network Settings]
You can make detailed settings for Internet and
x [Screen Saver]
[On]: Turns on the screen saver function.
[Off]: Off.
network.
x [Internet Settings]
x [Software Update Notification]
[On]: Sets the system to inform you of newer
[Off]: Off.
Connect the system to the network beforehand.
For details, see “Connecting to the network”
[View Network Status]: Displays the current
network status.
[Wired Setup]: Select this when you connect to
a broadband router directly.
[USB Wireless Setup]: Select this when you use
a USB Wireless LAN Adapter.
x [Gracenote Settings]
[Auto]: Automatically downloads disc
information when you stop playback of the disc.
To download, the system must be connected to
the network.
[Manual]: Downloads disc information when
you select [Playback History] or [Information
Display] in the options menu.
For more information, go to
For customers in Europe and Russia
x [DivX® VOD]
You can display the registration or
deregistration code for this system, or deregister
this system after registration.
For customers in Asia and Australia
When the registration is disabled
[Registration Code]: The registration code is
displayed.
[Deregistration Code]: The deregistration code
is displayed. (This item can be selected only
after the registration code is displayed.)
x [Network Connection Diagnostics]
You can run the network diagnostic to check if
the network connection has been made properly.
x [Connection Server Settings]
Sets whether or not to display the connected
DLNA server.
When the registration is enabled
Press C/c to select [OK] or [Cancel], then
press
.
x [Renderer Set-up]
[OK]: The device is deregistered and the
deregistration code is displayed.
[Cancel]: The system returns to the previous
display.
[Automatic Access Permission]: Sets whether or
not to allow automatic access from newly
detected DLNA controller.
[Smart Select]: Allows a Sony DLNA controller
to find the system as the target component to
operate by using the infrared ray. You can set
this function to on or off.
For more information, go to
GB
57
Download from Www.Somanuals.com. All Manuals Search And Download.
[Renderer Name]: Displays the system’s name
as it is listed on other DLNA devices on the
network.
x [Renderer Access Control]
Sets whether or not to accept commands from
DLNA controllers.
x [Party Auto Start]
[On]: Starts a party or joins an existing party at
the request of a networked device compatible
with the PARTY STREAMING function.
[Off]: Off.
x [BD Remote Device Registration]
Registers your “BD remote” device.
x [Registered BD Remote Devices]
Displays a list of your registered “BD remote”
devices.
[Easy Setup]
Re-runs the Easy Setup to make the basic
settings. Follow the on-screen instructions.
[Resetting]
x [Reset to Factory Default Settings]
You can reset the system settings to the factory
default by selecting the group of settings. All the
settings within the group will be reset.
x [Initialize Personal Information]
You can erase your personal information stored
in the system.
GB
58
Download from Www.Somanuals.com. All Manuals Search And Download.
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the unit. Should
this occur, the system may not operate properly. In
this case, remove the disc and leave the system turned
on for about half an hour until the moisture
evaporates.
Additional Information
Precautions
On safety
• To prevent fire or shock hazard, do not place objects
filled with liquids, such as vases, on the system, or
place the system near water, such as near a bathtub or
shower room. Should any solid object or liquid fall
into the cabinet, unplug the system and have it
checked by qualified personnel before operating it
any further.
• When you move the system, take out any disc. If you
do not, the disc may be damaged.
• If anything falls into the cabinet, unplug the unit and
have it checked by qualified personnel before
operating it any further.
On adjusting volume
• Do not touch the AC power cord (mains lead) with
wet hands. Doing so may cause an electric shock.
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
On power sources
• Unplug the unit from the wall outlet (mains) if you do
not intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
On cleaning
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the system in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the system can overheat and malfunction.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
On cleaning discs, disc/lens
cleaners
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
On replacement of parts
• In the events that this system is repaired, repaired
parts may be collected for reuse or recycling
purposes.
• Do not place the system on surfaces (rugs, blankets,
etc.) or near materials (curtains, draperies) that may
block the ventilation slots.
• Do not install the system in a confined space, such as
a bookshelf or similar unit.
On your TV’s color
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from the TV set.
• Do not install the system near heat sources such as
radiators, air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
• Do not install the system in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the system and discs away from components
with strong magnets, such as microwave ovens, or
large loudspeakers.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
• Do not place heavy objects on the system.
GB
59
Download from Www.Somanuals.com. All Manuals Search And Download.
On moving the system
• Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
Notes about the Discs
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
This system can only play a standard circular
disc. Using neither standard nor circular discs
(e.g., card, heart, or star shape) may cause a
malfunction.
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
GB
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you experience any of the following difficulties while using the system, use this troubleshooting
guide to help remedy the problem before requesting repairs. Should any problem persist, consult your
nearest Sony dealer.
Note that if service personnel changes some parts during repair, these parts may be retained.
In the event of a problem with the S-AIR function, have a Sony dealer check the entire system together
(S-AIR main unit and sub unit).
Power
Symptom
Problems and solutions
The power is not turned on.
“PROTECTOR” and “PUSH
• Check that the AC power cord (mains lead) is connected securely.
Press "/1 to turn off the system, and check the following items after
POWER” appear alternately in “STANDBY” disappears.
the front panel display.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the system?
• After checking the above items and fixing any problems, turn on the system. If
the cause of the problem cannot be found even after checking all the above
items, consult your nearest Sony dealer.
General
Symptom
Problems and solutions
The remote does not function.
• The distance between the remote and the unit is too far.
• The batteries in the remote are weak.
• When you cannot perform menu operations via the front panel display, press
HOME on the remote.
The system does not work
normally.
• Disconnect the AC power cord (mains lead) from the wall outlet (mains), then
reconnect after several minutes.
Picture
Symptom
Problems and solutions
There is no picture.
• The video input on the TV is not set so that you can view pictures from the
system.
• The unit is connected to an input device that is not HDCP (High-bandwidth
Digital Content Protection) compliant (“HDMI” on the front panel does not
• When playing a double-layer DVD, the video and audio may be momentarily
interrupted at the point where the layers switch.
No picture appears when the
• Press and hold N and VOLUME – on the unit for more than 5 seconds to reset
video output resolution selected the video output resolution to the lowest resolution.
in [Output Video Format] is
incorrect.
GB
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
Video signals are only output
• Set [Output Video Format] in [Screen Settings] to [Component Video]
connecting the HDMI OUT jack
and other video output jacks at
the same time.
dark/the bright area is too bright
or unnatural.
The picture is not output
correctly.
• If the analog and digital signals are output at the same time, set [BD/DVD-
• For BD-ROMs, check the [BD/DVD-ROM 1080/24p Output] settings in
Picture noise appears.
• The disc is dirty or flawed.
• If the picture output from your system goes through your VCR to get to your
TV, the copy-protection signal applied to some BD/DVD programs could affect
picture quality. If you still experience problems even when you connect your
unit directly to your TV, try connecting your unit to the other input jacks.
Even though you set the aspect • The aspect ratio on the disc is fixed.
ratio in [TV Type] of [Screen
Settings], the picture does not fill
the TV screen.
Color irregularity occurs on the • If the speakers are used with a CRT-based TV or projector, install the speakers
TV screen.
at least 0.3 meters from the TV set.
• If the color irregularity persists, turn off the TV set once, then turn it on after 15
to 30 minutes.
• Make sure that no magnetic object (magnetic latch on a TV stand, health care
device, toy, etc.) is placed near the speakers.
Sound
Symptom
Problems and solutions
There is no sound.
• The speaker cord is not connected securely.
• Fast forward or fast reverse is performed. Press N to return to normal play
mode.
• Slow forward or freeze frame is performed. Press N to return to normal play
mode.
No sound is output from the
HDMI OUT jack.
The left and right sounds are
unbalanced or reversed.
• Check that the speakers and components are connected correctly and securely.
There is no sound from the
subwoofer.
GB
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
There is no digital sound from
• Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
the HDMI OUT jack when using (page 56). Also, set [Audio Return Channel] in [HDMI Settings] of [System
the Audio Return Channel
function.
• Make sure that your TV is compatible with the Audio Return Channel function.
• Make sure that an HDMI cable is connected to a jack on your TV that is
compatible with the Audio Return Channel function.
• The sampling frequency of the input stream is more than 48 kHz.
The system does not output
• Set [Audio Return Channel] in [HDMI Settings] of [System Settings] to [Off]
to a set-top box.
Severe hum or noise is heard.
• Check that the connecting cords are away from a transformer or motor, and at
least 3 meters away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• Clean the disc.
The sound loses stereo effect
when you play a CD.
• Select stereo sound by pressing
hear when you are playing a
sound track of Dolby Digital,
DTS, or MPEG audio.
• Depending on the BD/DVD, the output signal may not be the entire 5.1 channel.
It may be monaural or stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
The sound comes from the center • Depending on the disc, the sound may come from the center speaker only.
speaker only.
No sound is heard from the
center speaker.
• Depending on the source, the effect of the center speaker may be less
noticeable.
• A 2 channel source is being played.
No sound or only a very low-
level sound is heard from the
surround speakers.
• Depending on the source, the effect of the surround speakers may be less
noticeable.
• A 2 channel source is being played.
off.
• Select “A.F.D. STD” for “SUR.SETTING” (page 27).
The sound effects are disabled. • The effects of SOUND MODE, “D.BASS,” “NIGHT MODE,” and
“SUR.SETTING” may be disabled depending on the input stream (page 54).
Distortion occurs in the sound of • Reduce the input level for the connected component by setting [Attenuate -
a connected component.
Operation
Symptom
Problems and solutions
Radio stations cannot be tuned • Check that the antenna (aerial) is connected securely. Adjust the antenna
in.
(aerial) or connect an external antenna (aerial) if necessary.
• The signal strength of the stations is too weak (when tuning in with automatic
tuning). Use direct tuning.
GB
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
The disc does not play.
• You are attempting to play a disc with a format that cannot be played back by
• The region code on the BD/DVD does not match the system.
• Moisture has condensed inside the unit and may cause damage to the lenses.
Remove the disc and leave the unit turned on for about half an hour.
File names are not displayed
correctly.
• The system can only display ISO 8859-1-compliant character formats. Other
character formats may be displayed differently.
• Depending on the writing software used, the input characters may be displayed
differently.
A disc does not start playing
from the beginning.
• Resume play has been selected. Press OPTIONS and select [Play from start],
then press
• The title or BD/DVD menu automatically appears on the TV screen.
Playback does not start from the • The resume point may be cleared from memory depending on the disc when
.
resume point where you last
stopped playing.
– you open the disc tray.
– you disconnect the USB device.
– you play other content.
– you turn off the unit.
The system starts playing the
disc automatically.
• The BD/DVD features an auto playback function.
Playback stops automatically.
• Some discs may contain an auto pause signal. While playing such a disc, the
system stops playback at the auto pause signal.
You cannot perform some
• Depending on the disc, you may not be able to perform some of the operations.
functions such as stop or search. Refer to the operating instructions supplied with the disc.
Messages do not appear on the • In the Setup Display, select the desired language for the on-screen display in
TV screen in the language you
want.
The language for the soundtrack/ • Try using the BD’s or DVD’s menu.
subtitle or angles cannot be
changed.
• Multi-lingual tracks/subtitles or multi-angles are not recorded on the BD or
DVD being played.
• The BD or DVD prohibits the changing of the language for the sound track/
subtitle or angles.
The disc tray does not open and • Try the following: 1 Press and hold N and Z on the unit for more than 5
you cannot remove the disc even seconds to open the disc tray. 2 Remove the disc. 3 Disconnect the AC power
after you press Z.
cord (mains lead) from the wall outlet (mains), then reconnect after several
minutes.
A disc cannot be ejected and
“LOCKED” appears in the front
panel display.
• Contact your Sony dealer or local authorized Sony service facility.
GB
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Problems and solutions
The Control for HDMI function • Set [Control for HDMI] in [HDMI Settings] of [System Settings] to [On]
does not work.
• Make sure that the connected component is compatible with the [Control for
HDMI] function.
• Check the connected component’s setting for the Control for HDMI function.
Refer to the operating instructions supplied with the component.
• If you change the HDMI connection, connect and disconnect the AC power
cord (mains lead), or have a power failure, set [Control for HDMI] in [HDMI
Settings] of [System Settings] to [Off], then set [Control for HDMI] to [On]
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
No sound is output from the
system and TV while using the
System Audio Control function.
• Make sure that the connected TV is compatible with the System Audio Control
function.
• For details, see “Using the Control for HDMI Function for “BRAVIA” Sync”
Bonus contents or other data that • Try the following: 1 Remove the disc. 2 Turn the system off. 3 Remove and
are contained in a BD-ROM
cannot be played.
ROM with BONUSVIEW/BD-LIVE.
The unit does not work and
“CHILD LOCK” appears in the
front panel display when you
press any button on the unit.
The system menu does not work. • Press HOME on the remote.
USB device
Symptom
Problems and solutions
The USB device is not
recognized.
• Try the following: 1 Turn the system off. 2 Remove and reconnect the USB
device. 3 Turn the system on.
• Make sure that the USB device is securely connected to the
• Check if the USB device or a cable is damaged.
• Check if the USB device is on.
(USB) port.
• If the USB device is connected via a USB hub, disconnect it and connect the
USB device directly to the unit.
GB
65
Download from Www.Somanuals.com. All Manuals Search And Download.
S-AIR
Symptom
Problems and solutions
There is no sound from the
S-AIR sub unit, noise is heard
from the S-AIR sub unit, or
sound from the S-AIR sub unit
skips.
• If you use another S-AIR main unit, place it more than 8 meters away from the
unit.
• Place the S-AIR main unit and S-AIR sub unit closer together.
• Avoid use of equipment that generates electromagnetic energy, such as a
microwave oven.
• Place the S-AIR main unit and S-AIR sub unit away from other wireless
products.
• Change the S-AIR ID settings of the S-AIR main unit and S-AIR sub unit.
• Turn off the system and S-AIR sub unit, then turn them on.
BRAVIA Internet Video
Symptom
Problems and solutions
The picture/sound is poor/certain • Picture/sound quality may be poor depending on Internet content providers.
programs display with a loss of
detail, especially during fast-
motion or dark scenes.
• Picture/sound quality may be improved by changing the connection speed.
Sony recommends a connection speed of at least 2.5 Mbps for standard-
definition video and 10 Mbps for high-definition video.
• Not all videos contain sound.
The picture is small.
• Press X to zoom in.
Network connection
Symptom
Problems and solutions
The system cannot connect to the • Check the network connection (page 24) and the network settings (page 57).
network.
You cannot connect your PC to • The wireless settings of the router may change automatically if you use the Wi-
the Internet after [Wi-Fi
Protected Setup (WPS)] is
performed.
Fi Protected Setup function before adjusting the settings of the router. In this
case, change the wireless settings of your PC accordingly.
You cannot connect the system • Check if the wireless LAN router is on.
to your wireless LAN router.
• Depending on the usage environment, including the wall material, radio wave
reception conditions, or obstacles between the system and the wireless LAN
router, the possible communication distance may be shortened. Move the
system and the wireless LAN router closer to each other.
• Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or
digital cordless device, may interrupt the communication. Move the unit away
from such devices, or turn off such devices.
The desired wireless router is not • Press RETURN to return to the previous screen, and try [Scan] again. If the
detected even if [Scan] is
performed.
desired wireless router is still not detected, press RETURN to select [Manual
registration].
The message [A new software
version has been found on the
network. Perform update under
“Network Update.”] appears on
the screen when turning the
system on.
version.
GB
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Other
Symptom
Problems and solutions
“Exxxx” appears in the front
panel display.
• Contact your nearest Sony dealer or local authorized Sony service facility and
give the error code.
appears without any
• Contact your nearest Sony dealer or local authorized Sony service facility.
messages on the entire screen.
GB
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on playback operations of a
BD/DVD
Some playback operations of a BD/DVD may be
intentionally set by software producers. Since
this system plays a BD/DVD according to the
disc contents the software producers designed,
some playback features may not be available.
Playable Discs
1)
Blu-ray Disc
BD-ROM
2)
BD-R/BD-RE
DVD-ROM
3)
DVD
DVD-R/DVD-RW
DVD+R/DVD+RW
Note about double-layer BDs/
DVDs
The playback picture and sound may be
3)
CD
CD-DA (Music CD)
CD-ROM
momentarily interrupted when the layers switch.
CD-R/CD-RW
Super Audio CD
Region code (BD-ROM/DVD
VIDEO only)
1)Since the Blu-ray Disc specifications are new and
evolving, some discs may not be playable depending
on the disc type and the version. Also, the audio
output differs depending on the source, connected
output jack, and selected audio settings.
2)BD-RE: Ver.2.1
Your system has a region code printed on the
rear of the unit and will only play a BD-ROM/
DVD VIDEO (playback only) labeled with
ALL
identical region codes or
.
BD-R: Ver.1.1, 1.2, 1.3 including organic pigment
type BD-R (LTH type)
BD-Rs recorded on a PC cannot be played if
postscripts are recordable.
3)A CD or DVD disc will not play if it has not been
correctly finalized. For more information, refer to the
operating instructions supplied with the recording
device.
Discs that cannot be played
• BDs with cartridge
• DVD-RAMs
• HD DVDs
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• VCDs/Super VCDs
• Audio material side on DualDiscs
Notes on discs
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
DualDiscs and some music discs encoded with
copyright protection technologies do not
conform to the Compact Disc (CD) standard.
Therefore, these discs may not be compatible
with this product.
GB
68
Download from Www.Somanuals.com. All Manuals Search And Download.
7)The system does not play these files via the DLNA
renderer function.
Playable Types of Files
Note
• Some files may not play depending on the file format,
the file encoding, the recording condition, or DLNA
server condition.
Video7)
File format
Extensions
1)5)
• Some files edited on a PC may not play.
• The system can recognize the following files or
folders in BDs, DVDs, CDs and USB devices:
– up to folders in the 5th tree
MPEG-1 Video/PS
“.mpg,” “.mpeg,” “.m2ts,”
“.mts”
MPEG-2 Video/PS,
1)6)
TS
2)
DivX
“.avi,” “.divx”
– up to 500 files in a single tree
1)5)
MPEG4/AVC
“.mkv,” “.mp4,” “.m4v,”
“.m2ts,” “.mts”
• The system can recognize the following files or
folders stored in the DLNA server:
1)5)
WMV9
“.wmv,” “.asf”
3)5)
– up to folders in the 20th tree
AVCHD
– up to 999 files in a single tree
• Some USB devices may not work with this system.
• The system can recognize Mass Storage Class (MSC)
devices (such as flash memory or an HDD) that are
FAT-compatible and non-partitioned, Still Image
Capture Devices (SICDs), and 101-key keyboards
Music
File format
Extensions
MP3 (MPEG-1 Audio
Layer III)
“.mp3”
(front
(USB) port only).
1)4)5)
AAC
“.m4a”
“.wma”
“.wav”
• To avoid data corruption or damage to USB memory
or other devices, turn the system off before
connecting or removing USB memory or other
devices.
1)4)
WMA9 Standard
LPCM
Photo7)
• The system may not play high bit rate video files from
a DATA CD smoothly. It is recommended to play
high bit rate video files using a DATA DVD.
File format
Extensions
JPEG
“.jpg,” “.jpeg,” “.jpe”
1)The system does not play files encoded with DRM.
®
2)ABOUT DIVX VIDEO: DivX is a digital video
format created by DivX, Inc. This is an official DivX
Certified device that plays DivX video. Visit
tools to convert your files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX
®
Certified device must be registered in order to play
DivX Video-on-Demand (VOD) content. To
generate the registration code, locate the DivX VOD
section in the device setup menu. Go to
vod.divx.com with this code to complete the
registration process and learn more about DivX
VOD.
3)The system plays AVCHD-format files that are
recorded via a digital video camera, etc. To watch
AVCHD-format files, the disc with AVCHD-format
files on it must be finalized.
4)The system does not play files encoded with
Lossless, etc.
5)The system does not play these files via the DLNA
function.
6)The system plays SD resolution only via the DLNA
function.
GB
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Supported Audio Formats
Audio formats supported by this system are as follows.
Format
LPCM 2ch
LPCM 5.1ch,
LPCM 7.1ch
Dolby Digital Dolby
TrueHD,
DTS
DTS-ES
Discrete 6.1,
DTS-ES
Matrix 6.1,
DTS96/24
DTS-HD
High
Resolution
Audio
DTS-HD
Master
Audio
Function
Dolby Digital
Plus
“BD/DVD”
a
a
a
a
a
a
a
a
a
a
a
“SAT/CABLE”
“TV”
–
–
–
–
–
(DIGITAL IN)
a: Supported format.
–: Unsupported format.
Video Output Resolution
Output resolution differs depending on the [Output Video Format] setting in [Screen Settings]
When [Output Video Format] is set to
[HDMI]
When [Output Video Format] is set to
[Component Video]
Resolution
setting
COMPONENT
COMPONENT
VIDEO OUT
jack
HDMI OUT
VIDEO OUT
jack
HDMI OUT
VIDEO OUT
jacks
VIDEO OUT
jacks
jack
jack
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480i/576i
480p/576p
720p*
480i/576i
480p/576p
720p
480i/576i
480i/576i
480i/576i
480i/576i
unselectable
480i/576i
480p/576p
720p*
480i/576i
480p/576p
720p
1080i
1080i*
1080i
1080i*
1080i
1080p
1080i*
1080p
unselectable unselectable
* Protected contents on DVDs are output at 480p/576p resolution.
When [Output Video Format] is set to [Video]
480i/576i video signals are output from the VIDEO OUT or COMPONENT VIDEO OUT jack, and
480p/576p video signals are output from the HDMI OUT jack.
GB
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuning range
87.5 MHz - 108.0 MHz
(50 kHz step)
Specifications
Amplifier Section
BDV-E870:
Antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
FM wire antenna (aerial)
10.7 MHz
Speakers
POWER OUTPUT (rated)
Front L/Front R:
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
Front/Surround (SS-TSB101) for BDV-E370
Surround (SS-TSB101) for BDV-E870
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
167 W (per channel at 3
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Full range Bass reflex
55 mm × 80 mm cone type
3 ohms
75 mm × 225 mm × 71 mm
(w/h/d)
ohms, 1 kHz)
165 W (at 3 ohms, 80 Hz)
Subwoofer:
BDV-E370:
POWER OUTPUT (rated)
Front L/Front R:
Mass (approx.)
0.45 kg
108 W + 108 W (at 3 ohms,
1 kHz, 1% THD)
Front (SS-TSB104) for BDV-E870
Speaker system
Full range Bass reflex
POWER OUTPUT (reference)
Front L/Front R/Center/Surround L/Surround R:
142 W (per channel at 3
Speaker unit
Rated impedance
Dimensions (approx.)
55 mm × 80 mm cone type
3 ohms
75 mm × 610 mm × 70 mm
(w/h/d) (wall-mounted
part)
ohms, 1 kHz)
Subwoofer:
140 W (at 3 ohms, 80 Hz)
Inputs (Analog)
AUDIO (AUDIO IN)
Inputs (Digital)
SAT/CABLE (COAXIAL), TV (OPTICAL)
Supported formats: LPCM
251 mm × 1,205 mm × 251
mm (w/h/d) (whole
speaker)
0.9 kg (wall-mounted part)
2.7 kg (whole speaker)
Sensitivity: 450/250 mV
Mass (approx.)
2CH (up to 48 kHz), Dolby
Digital, DTS
Center (SS-CTB101)
Speaker system
Full range Acoustic
suspension, Magnetically
Shielded
30 mm × 60 mm cone type
3 ohms
290 mm × 49 mm × 49 mm
(w/h/d)
0.28 kg
Video Section
Outputs
VIDEO: 1 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p
75 ohms
Speaker unit
Rated impedance
Dimensions (approx.)
HDMI OUT: Type A (19
pin)
Mass (approx.)
BD/DVD/Super Audio CD/CD System
Subwoofer (SS-WSB101)
Signal format system
PAL/NTSC
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Subwoofer Bass reflex
160 mm cone type
3 ohms
260 mm × 320 mm × 260
mm (w/h/d)
5.2 kg
USB Section
(USB) port:
Type A (For connecting
USB memory, memory
card reader, digital still
camera, and digital video
camera)
Mass (approx.)
General
Maximum current:
500 mA
Power requirements
Taiwan models:
Other models:
120 V AC, 50/60 Hz
220 V - 240 V AC,
50/60 Hz
On: 170 W
Standby: 0.3 W (at the
Power Saving mode)
LAN Section
LAN (100) terminal
100BASE-TX Terminal
Tuner Section
System
Power consumption
PLL quartz-locked digital
synthesizer
FM tuner section
GB
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Dimensions (approx.)
Mass (approx.)
430 mm × 85 mm × 335
mm (w/h/d) incl.
projecting parts
4.8 kg
Design and specifications are subject to change
without notice.
• Standby power consumption 0.3 W.
• Halogenated flame retardants are not used in the
certain printed wiring boards.
• Over 85% power efficiency of amplifier block is
achieved with the full digital amplifier, S-Master.
GB
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1358 Maltese
1363 Burmese
1365 Nauru
1369 Nepali
1376 Dutch
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1525 Telugu
1527 Tajik
1061 Bislama
1066 Bengali;
Bangla
1248 Indonesian
1253 Icelandic
1254 Italian
1528 Thai
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1326 Lingala
1435 Pashto; Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1543 Twi
1557 Ukrainian
1564 Urdu
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1501 Sangho
1502 Serbo-Croatian
1503 Singhalese
1505 Slovak
1327 Laothian
1332 Lithuanian
1334 Latvian; Lettish
1345 Malagasy
1171 Faroese
1174 French
1181 Frisian
1506 Slovenian
1703 Not specified
Parental Control/Area Code List
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2109 Germany
2200 Greece
2219 Hong Kong
2248 India
2238 Indonesia
2239 Ireland
2254 Italy
2276 Japan
2304 Korea
2376 Netherlands
2390 New Zealand
2379 Norway
2543 Taiwan
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2428 Poland
2090 Chile
2092 China
2436 Portugal
2489 Russia
2093 Colombia
2115 Denmark
2165 Finland
2174 France
2501 Singapore
2149 Spain
2333 Luxembourg
2363 Malaysia
2362 Mexico
2499 Sweden
2086 Switzerland
GB
73
Download from Www.Somanuals.com. All Manuals Search And Download.
BD-ROM
BD-ROMs (Blu-ray Disc Read-Only Memory)
are commercially produced discs and are
available in the same capacities as the BD
below. Other than conventional movie and video
contents, these discs have enhanced features
such as interactive content, menu operations
using pop-up menus, selection of subtitle
display, and slideshow. Although a BD-ROM
may contain any form of data, most BD-ROM
discs will contain movies in High Definition
format, for playback on Blu-ray Disc/DVD
players.
Glossary
AVCHD
The AVCHD format is a high-definition digital
video camera format used to record SD
(standard definition) or HD (high definition)
signals of either the 1080i specification* or the
720p specification** on DVDs, using efficient
data compression coding technology. The
MPEG-4 AVC/H.264 format is adopted to
compress video data, and the Dolby Digital or
Linear PCM system is used to compress audio
data. The MPEG-4 AVC/H.264 format is
capable of compressing images at higher
efficiency than that of the conventional image
compression format. The MPEG-4 AVC/H.264
format enables a high definition (HD) video
signal shot on a digital video camera recorder to
be recorded on DVD discs in the same way as it
would be for a standard definition (SD)
television signal.
Blu-ray Disc (BD)
A disc format developed for recording/playing
high-definition (HD) video (for HDTV, etc.),
and for storing large amounts of data. A single
layer Blu-ray Disc holds up to 25 GB, and a
dual-layer Blu-ray Disc holds up to 50 GB of
data.
Digital Cinema Auto Calibration
(D.C.A.C)
Digital Cinema Auto Calibration was developed
by Sony to automatically measure and adjust the
speaker settings to your listening environment in
a short period of time.
* A high definition specification that utilizes 1080
effective scanning lines and the interlace format.
**A high definition specification that utilizes 720
effective scanning lines and the progressive format.
BD-J application
Dolby Digital
The BD-ROM format supports Java for
interactive functions.
“BD-J” offers content providers almost
unlimited functionality when creating
interactive BD-ROM titles.
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
BD-R
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
BD-R (Blu-ray Disc Recordable) is a
recordable, write-once Blu-ray Disc, available
in the same capacities as the BD below. Since
contents can be recorded and cannot be
overwritten, a BD-R can be used to archive
valuable data or store and distribute video
material.
BD-RE
Dolby Digital Plus
BD-RE (Blu-ray Disc Rewritable) is a
recordable and rewritable Blu-ray Disc,
available in the same capacities as the BD
below. The re-recordable feature makes
extensive editing and time-shifting applications
possible.
Developed as an extension to Dolby Digital, the
audio coding technology supports 7.1 multi-
channel surround sound.
GB
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Pro Logic II
DTS-HD Master Audio
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
DTS-HD Master Audio has a maximum
transmission rate of 24.5 Mbps, and uses
lossless compression, and DTS-HD Master
Audio corresponds to a maximum sampling
frequency of 192 kHz, and maximum of 7.1ch.
HDMI (High-Definition Multimedia
Interface)
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
HDMI is an interface that supports both video
and audio on a single digital connection,
allowing you to enjoy high quality digital
picture and sound. The HDMI specification
supports HDCP (High-bandwidth Digital
Content Protection), a copy protection
technology that incorporates coding technology
for digital video signals.
Dolby Surround Pro Logic
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
the former Dolby Surround system, Dolby
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds
more precisely. To take full advantage of Dolby
Surround Pro Logic, you should have one pair of
surround speakers and a center speaker. The
surround speakers output monaural sound.
Interlace format
(Interlaced scanning)
The Interlace format is the NTSC standard
method for displaying TV images at 30 frames
per second. Each frame is scanned twice -
alternately between the even numbered scanning
lines and then odd numbered scanning lines, at
60 times per second.
Dolby TrueHD
LTH (Low to High)
Dolby TrueHD is a lossless coding technology
that supports up to 8 channels of multi-channel
surround sound for the next generation of optical
discs. The reproduced sound is true to the
original source bit-for-bit.
LTH is a recording system that supports organic
pigment type BD-R.
Parental Control
A function of the BD/DVD to limit playback of
the disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback is completely prohibited, violent
scenes are skipped or replaced with other scenes
and so on.
DTS
Digital audio compression technology
developed by DTS, Inc. This technology
conforms to 5.1-channel surround. This format
includes a stereo rear channel and a discrete
subwoofer channel. DTS provides the same 5.1
discrete channels of high quality digital audio.
The good channel separation is realized due to
the all channel data being recorded discretely
and processed in digitally.
PhotoTV HD
“PhotoTV HD” allows for highly-detailed
pictures, and photo-like expression of subtle
textures and colors. By connecting Sony
“PhotoTV HD” compatible devices using an
HDMI cable, a whole new world of photos can
be enjoyed in breathtaking Full HD quality. For
instance, the delicate texture of the human skin,
flowers, sand and waves can now be displayed
on a large screen in beautiful photo-like quality.
DTS-HD High Resolution Audio
Developed as an extension to DTS Digital
Surround format. It supports a maximum
sampling frequency of 96 kHz, and 7.1 multi-
channel surround.
DTS-HD High Resolution Audio has a
maximum transmission rate of 6 Mbps, with
lossy compression.
GB
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Pop-up menu
An enhanced menu operation available on BD-
ROMs. The pop-up menu appears when POP
UP/MENU is pressed during playback, and can
be operated while playback is in progress.
Progressive format
(sequential scanning)
In contrast to the Interlace format, the
progressive format can reproduce 50 - 60 frames
per second by reproducing all scanning lines
(525 lines for the NTSC system). The overall
picture quality increases and still images, text
and horizontal lines appear sharper. This format
is compatible with the 525 or 625 progressive
format.
S-AIR
(Sony Audio Interactive Radio
frequency)
Recent times have seen the rapid spread of BD/
DVD media, digital broadcasting, and other
high-quality media.
To ensure that the subtle nuances of these high-
quality media are transmitted with no
deterioration, Sony has developed a technology
called “S-AIR” for the radio transmission of
digital audio signals with no compression, and
has incorporated this technology into the EZW-
RT10/EZW-RT10A/EZW-T100.
This technology transfers digital audio signals
with no compression using the 2.4 GHz band
range of ISM band (Industrial, Scientific, and
Medical band), such as wireless LANs and
Bluetooth applications.
24p True Cinema
Movies shot with a film camera consist of 24
frames per second.
Since conventional televisions (both CRT and
flat panels) display frames either at 1/60 or 1/50
second intervals, the 24 frames do not appear at
an even pace.
When connected to a TV with 24p capabilities,
the player displays each frame at 1/24 second
intervals — the same interval originally shot
with the film camera, thus faithfully reproducing
the original cinema image.
GB
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
D
M
N
A
Network Connection
O
P
E
B
BD Hybrid Disc Playback
F
BD Remote Device
BD/DVD-ROM 1080/24p
G
Q
H
HDMI
R
Registered BD Remote Devices
Reset to Factory Default
HDMI (High-Definition
I
Initialize Personal Information
C
Internet Video Parental Control
S
L
GB
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Super Audio CD Playback
Channels 56
Super Audio CD Playback
Layer 56
T
TV Screen Size Setting for 3D
53
U
W
GB
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
The software of this system may be updated in the future. To find out details on any
available updates, please visit the following URL.
Printed in Malaysia
(1)
Download from Www.Somanuals.com. All Manuals Search And Download.
|