Sony Flat Panel Television 4 159 943 111 User Manual

Award to goods or services which meet the environmental  
requirements of the EU ecolabelling scheme  
ES-CAT/022/002  
At Sony we are constantly rethinking and redesigning in order to create innovative digital  
entertainment products. And we are also constantly rethinking and re-evaluating our  
products, processes and our potential impact on the planet.  
Thanks to our results in that direction, this product achieved the European Eco label  
award issued by the European Comission. You can get more information in following link:  
Sony gives a minimum of 2 years guarantee for this LCD TV and 7 years availability for  
replacement of electronic parts.  
LCD Digital Colour TV  
Operating Instructions  
KDL-52V58xx  
KDL-46V58xx  
KDL-40V58xx  
KDL-37V58xx  
KDL-32V58xx  
KDL-52W58xx  
KDL-46W58xx  
KDL-40W58xx  
KDL-37W58xx  
KDL-32W58xx  
Instructions about “Installing Wall Mount Bracket” are included within  
this TV’s instructions manual  
For useful information about Sony products  
4-159-943-11(1)  
© 2009 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4-159-943-11(1)  
Printed in Spain  
Notes on Digital TV  
function  
NOTICE FOR  
CUSTOMERS IN  
THE UNITED  
KINGDOM  
• Any functions related to Digital TV  
(
) will only work in countries or  
areas where DVB-T (MPEG-2 and  
H.264/MPEG-4 AVC) digital terrestrial  
signals are broadcast or where you have  
access to a compatible DVB-C (MPEG-  
2 and H.264/MPEG-4 AVC) cable  
service. Please confirm with your local  
dealer if you can receive a DVB-T signal  
where you live or ask your cable  
A moulded plug complying with BS1363  
is fitted to this equipment for your safety  
and convenience.  
provider if their DVB-C cable service is  
suitable for integrated operation with this  
TV.  
• Your cable provider may charge a fee for  
their services, or require you to agree to  
its terms and conditions of business.  
• This TV set complies with DVB-T and  
DVB-C specifications, but compatibility  
with future DVB-T digital terrestrial and  
DVB-C digital cable broadcasts are not  
guaranteed.  
• Some Digital TV functions may not be  
available in some countries/areas and  
DVB-C cable may not operate correctly  
with some providers.  
Should the fuse in the plug supplied need  
to be replaced, a 10 AMP fuse approved by  
ASTA or BSI to BS 1362 (i.e., marked  
with  
or ) must be used.  
When an alternative type of plug is used it  
should be fitted with a 10 AMP FUSE  
otherwise the circuit should be protected  
by a 10 AMP FUSE at the distribution  
board.  
If the plug supplied with this equipment  
has a detachable fuse cover, be sure to  
attach the fuse cover after you change the  
fuse. Never use the plug without the fuse  
cover. If you should lose the fuse cover,  
please contact your nearest Sony service  
station.  
For a list of compatible cable providers,  
refer to the support web site:  
DVBC/  
~
• The illustrations used in this manual are  
of the KDL-40V58xx unless otherwise  
state.  
• The "x" that appear on the model name,  
correspond to numeric digits related to  
colour variation.  
FUSE  
Trademark information  
is a registered trademark of the DVB  
Project.  
HDMI, the HDMI logo and High-  
Definition Multimedia Interface are  
trademarks or registered trademarks of  
HDMI Licensing LLC.  
FUSE  
DLNA and DLNA CERTIFIED are  
trademarks and/or service marks of Digital  
Living Network Alliance.  
How to replace the fuse  
Open the fuse compartment with a blade  
screwdriver, and replace the fuse.  
Please refer to the illustration that actually  
equipped with the product.  
Manufactured under license from Dolby  
Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby  
Laboratories.  
Introduction  
Thank you for choosing this Sony product.  
Before operating the TV, please read this  
manual thoroughly and retain it for future  
reference.  
“BRAVIA” and  
are  
trademarks of Sony Corporation.  
“XMB™” and “XrossMediaBar” are  
trademarks of Sony Corporation and Sony  
Computer Entertainment Inc.  
DiSEqC™ is a trademark of EUTELSAT.  
The manufacturer of this product is  
Sony Corporation, 1-7-1 Konan  
Minato-ku Tokyo, 108-0075 Japan.  
The Authorized Representative for  
EMC and product safety is Sony  
Deutschland GmbH, Hedelfinger  
Strasse 61, 70327 Stuttgart,  
FREESAT and the FREESAT logo are  
registered trade marks of Freesat (UK) Ltd  
and are used under licence.  
FREESAT Logo (c) Freesat (UK) Ltd.  
The Channel logos are trade marks and  
copyright of their respective owners.  
Germany. For any service or  
guarantee matters please refer to  
the addresses given in separate  
service or guarantee documents.  
GB  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Precautions....................................................................................................................................... 9  
Watching TV.................................................................................................................................... 14  
Additional Information  
Installing the Accessories (Wall-Mount Bracket) ........................................................................ 17  
Specifications ................................................................................................................................. 20  
Troubleshooting ............................................................................................................................. 23  
GB  
Before operating the TV, please read “Safety Information” (page 8). Retain this manual for future reference.  
GB  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Start-up Guide  
Before Use  
1: Attaching the stand  
1
Open the carton box and take out the stand  
and the screws.  
To check the accessories  
Mains lead (Type C-6)* (1) (Except for 37/32  
inches)  
2
Place the TV set on the stand. Take care  
not to interfere with cables.  
Stand (1) and screws (4)  
RM-ED020 Remote (1)  
RM-ED018 Remote (1) (KDL-46/40/37/32W5820/  
5830/5840 only)  
Size AA batteries (R6 type) (2)  
* Do not remove the ferrite cores.  
To insert batteries into the remote  
Push and lift the cover to open.  
3
Fix the TV to the stand according to the  
arrow marks that guide the screw holes  
using the supplied screws.  
~
• If using an electric screwdriver, set the tightening  
torque at approximately 1.5 N·m (15 kgf·cm).  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting a Set Top Box/recorder (e.g.  
DVD recorder) with HDMI  
2: Connecting an aerial/Set  
Top Box/recorder (e.g. DVD  
recorder)  
Connecting a Set Top Box/recorder (e.g.  
DVD recorder) with SCART  
Set Top Box/recorder (e.g. DVD recorder)  
3: Preventing the TV from  
toppling over  
Set Top Box/recorder (e.g. DVD recorder)  
• Screw the satellite connector softly with hand, do  
not use any tool.  
• TV must be switched off when connecting satellite  
antenna.  
GB  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
2
3
Install a wood screw (4 mm in diameter,  
not supplied) in the TV stand.  
3
Install a machine screw (M4 × 20, not  
supplied) into the screw hole of the TV.  
Tie the wood screw and the machine  
screw with a strong cord.  
Follow the instructions on the screen.  
4: Bundling the cables  
Satellite Auto Tuning: Confirm that the  
tuning settings are the same that your  
satellite settings.  
Digital Auto Tuning: When you select  
“Cable”, we recommend that you select  
“Quick Scan” for quick tuning. Set  
“Frequency” and “Network ID” according  
to the information supplied from your  
cable provider. If no channel is found  
using “Quick Scan”, try “Full Scan”  
(though it may take some time).  
For a list of compatible cable providers,  
refer to the support web site:  
DVBC/  
~
• You can also tune channels manually.  
Programme Sorting: If you want to  
change the order of analogue channels,  
follow the steps in “Programme Sorting”.  
~
• Do not bundle the mains lead/AC power cord  
together with other cables.  
Eco Preset: When you select “Yes”, the  
“Eco” settings are changed into  
recommended values to reduce power  
consumption.  
5: Performing the initial  
Set-up  
1 Connect the TV to your mains socket.  
2 Press 1 on the TV.  
When you switch on the TV for the first  
time, the Language menu appears on the  
screen.  
GB  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the viewing angle  
of the TV  
This TV can be adjusted within the angles  
shown below.  
Adjust the angle left and right (swivel)  
Top view  
Front  
Detaching the Table-Top  
Stand from the TV  
~
• Remove the screws guided by the arrow marks  
of the TV.  
• Do not remove the Table-Top Stand for any  
reason other than to wall-mount the TV.  
GB  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Installed on the wall  
Notes  
• Do not use the supplied mains lead on  
any other equipment.  
30 cm  
Safety  
Information  
• Do not pinch, bend, or twist the mains  
lead excessively. The core conductors  
may be exposed or broken.  
10 cm  
10 cm  
• Do not modify the mains lead.  
• Do not put anything heavy on the mains  
lead.  
• Do not pull on the mains lead itself when  
disconnecting the mains lead.  
• Do not connect too many appliances to  
the same mains socket.  
Installation/Set-up  
Install and use the TV set in accordance  
with the instructions below in order to  
avoid any risk of fire, electrical shock or  
damage and/or injuries.  
10 cm  
Leave at least this space around  
the set.  
Installation  
• The TV set should be installed near an  
easily accessible mains socket.  
• Place the TV set on a stable, level  
surface.  
• Only qualified service personnel should  
carry out wall installations.  
• Do not use a poor fitting mains socket.  
Installed with stand  
30 cm  
Prohibited Usage  
Do not install/use the TV set in locations,  
environments or situations such as those  
listed below, or the TV set may  
10 cm  
10 cm  
6 cm  
• For safety reasons, it is strongly  
recommended that you use Sony  
accessories, including:  
malfunction and cause a fire, electrical  
shock, damage and/or injuries.  
Leave at least this space around  
the set.  
Location:  
Wall-mount bracket SU-WL500  
Outdoors (in direct sunlight), at the  
seashore, on a ship or other vessel, inside a  
vehicle, in medical institutions, unstable  
locations, near water, rain, moisture or  
smoke.  
• Be sure to use the screws supplied with  
the Wall-mount bracket when attaching  
the mounting hooks to the TV set. The  
supplied screws are designed so that they  
are 8 mm to 12 mm in length when  
measured from the attaching surface of  
the mounting hook.  
The diameter and length of the screws  
differ depending on the Wall-mount  
bracket model.  
• To ensure proper ventilation and prevent  
the collection of dirt or dust:  
Do not lay the TV set flat, install  
upside down, backwards, or  
sideways.  
Do not place the TV set on a shelf,  
rug, bed or in a closet.  
Do not cover the TV set with a cloth,  
such as curtains, or items such as  
newspapers, etc.  
Environment:  
• To prevent the spread of fire,  
keep candles or other open  
flames away from this product  
at all time.  
Use of screws other than those supplied  
may result in internal damage to the TV  
set or cause it to fall, etc.  
• Places that are hot, humid, or excessively  
dusty; where insects may enter; where it  
might be exposed to mechanical  
vibration, near flammable objects  
(candles, etc). The TV set shall not be  
exposed to dripping or splashing and no  
objects filled with liquids, such as vases,  
shall be placed on the TV.  
Do not install the TV set as shown  
below.  
8 mm - 12 mm  
Air circulation is blocked.  
Screw (supplied with the  
Wall-mount bracket)  
Mounting Hook  
Situation:  
Hook attachment on rear  
of TV set  
Wall  
Wall  
Do not use when your hands are wet, with  
the cabinet removed, or with attachments  
not recommended by the manufacturer.  
Disconnect the TV set from mains socket  
and aerial during lightning storms.  
Transporting  
• Before  
transporting the  
TVset,disconnect  
all cables.  
• Two or three  
people are needed  
totransport a large  
TV set.  
Broken pieces:  
• Do not throw anything at the TV set. The  
screen glass may break by the impact and  
cause serious injury.  
• If the surface of the TV set cracks, do not  
touch it until you have unplugged the  
mains lead. Otherwise electric shock  
may result.  
Mains lead  
Handle the mains lead and socket as  
follows in order to avoid any risk of fire,  
electrical shock or damage and/or injuries:  
• When  
Use only mains leads supplied by  
Sony, not other suppliers.  
Insert the plug fully into the mains  
socket.  
Operate the TV set on a 220–240 V AC  
supply only.  
When wiring cables, be sure to unplug  
the mains lead for your safety and take  
care not to catch your feet on the  
cables.  
Disconnect the mains lead from the  
mains socket before working on or  
moving the TV set.  
transporting the  
TV set by hand,  
hold it as shown  
on the right. Do  
not put stress on  
the LCD panel.  
• When lifting or  
moving the TV  
set, hold it firmly  
from the bottom.  
• When transporting the TV set, do not  
subject it to jolts or excessive vibration.  
• When transporting the TV set for repairs  
or when moving, pack it using the  
original carton and packing material.  
When not in use  
• If you will not be using the TV set for  
several days, the TV set should be  
disconnected from the mains for  
environmental and safety reasons.  
• As the TV set is not disconnected from  
the mains when the TV set is just turned  
off, pull the plug from the mains to  
disconnect the TV set completely.  
• However, some TV sets may have  
features that require the TV set to be left  
in standby to work correctly.  
Keep the mains lead away from heat  
sources.  
Ventilation  
• Never cover the ventilation holes or  
insert anything in the cabinet.  
• Leave space around the TV set as shown  
below.  
• It is strongly recommended that you use  
a Sony wall-mount bracket in order to  
provide adequate air-circulation.  
Unplug the mains plug and clean it  
regularly. If the plug is covered with  
dust and it picks up moisture, its  
insulation may deteriorate, which  
could result in a fire.  
For children  
• Do not allow children to climb on the TV  
set.  
• Keep small accessories out of the reach  
of children, so that they are not  
mistakenly swallowed.  
GB  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
contact with rubber or vinyl materials  
may result in damage to the screen  
surface and cabinet material.  
• Periodic vacuuming of the ventilation  
openings is recommended to ensure to  
proper ventilation.  
• When adjusting the angle of the TV set,  
move it slowly so as to prevent the TV  
set from moving or slipping off from its  
table stand.  
Disposal of  
waste batteries  
(applicable in the  
European Union  
and other  
If the following problems  
occur...  
Turn off the TV set and unplug the mains  
lead immediately if any of the following  
problems occur.  
Ask your dealer or Sony service centre to  
have it checked by qualified service  
personnel.  
European  
countries with separate  
collection systems)  
Optional Equipment  
When:  
This symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not be  
treated as household waste. On certain  
batteries this symbol might be used in  
combination with a chemical symbol. The  
chemical symbols for mercury (Hg) or lead  
(Pb) are added if the battery contains more  
than 0.0005% mercury or 0.004% lead. By  
ensuring these batteries are disposed of  
correctly, you will help prevent potentially  
negative consequences for the  
• Keep optional components or any  
equipment emitting electromagnetic  
radiation away from the TV set.  
Otherwise picture distortion and/or noisy  
sound may occur.  
Mains lead is damaged.  
Poor fitting of mains socket.  
TV set is damaged by being dropped,  
hit or having something thrown at it.  
Any liquid or solid object falls through  
openings in the cabinet.  
• This product has been tested and found  
to compliant with the limits set out in the  
EMC Directive for using connection  
cables not longer than 3 meters (9.8 feet).  
Batteries  
• Observe the correct polarity when  
inserting batteries.  
• Do not use different types of batteries  
together or mix old and new batteries.  
• Dispose of batteries in an  
environmentally friendly way. Certain  
regions may regulate the disposal of  
batteries. Please consult your local  
authority.  
• Handle the remote with care. Do not  
drop or step on it, or spill liquid of any  
kind onto it.  
• Do not place the remote in a location  
near a heat source, a place subject to  
direct sunlight, or a damp room.  
Precautions  
Viewing the TV  
• View the TV in moderate light, as  
viewing the TV in poor light or during  
long period of time, strains your eyes.  
• When using headphones, adjust the  
volume so as to avoid excessive levels,  
as hearing damage may result.  
environment and human health which  
could otherwise be caused by  
inappropriate waste handling of the  
battery. The recycling of the materials will  
help to conserve natural resources. In case  
of products that for safety, performance or  
data integrity reasons require a permanent  
connection with an incorporated battery,  
this battery should be replaced by qualified  
service staff only. To ensure that the  
battery will be treated properly, hand over  
the product at end-of-life to the applicable  
collection point for the recycling of  
electrical and electronic equipment. For all  
other batteries, please view the section on  
how to remove the battery from the product  
safely. Hand the battery over to the  
applicable collection point for the  
LCD Screen  
• Although the LCD screen is made with  
high-precision technology and 99.99%  
or more of the pixels are effective, black  
dots may appear or bright points of light  
(red, blue, or green) may appear  
constantly on the LCD screen. This is a  
structural property of the LCD screen  
and is not a malfunction.  
• Do not push or scratch the front filter, or  
place objects on top of this TV set. The  
image may be uneven or the LCD screen  
may be damaged.  
• If this TV set is used in a cold place, a  
smear may occur in the picture or the  
picture may become dark. This does not  
indicate a failure. These phenomena  
disappear as the temperature rises.  
Disposal of the TV set  
Disposal of Old  
Electrical &  
Electronic  
Equipment  
(Applicable in  
recycling of waste batteries. For more  
detailed information about recycling of  
this product or battery, please contact your  
local Civic Office, your household waste  
disposal service or the shop where you  
purchased the product.  
the European  
Union and other European  
countries with separate  
collection systems)  
This symbol on the product or on its  
packaging indicates that this product shall  
not be treated as household waste. Instead  
it shall be handed over to the applicable  
collection point for the recycling of  
electrical and electronic equipment. By  
ensuring this product is disposed of  
correctly, you will help prevent potential  
negative consequences for the  
• Ghosting may occur when still pictures  
are displayed continuously. It may  
disappear after a few moments.  
• The screen and cabinet get warm when  
this TV set is in use. This is not a  
malfunction.  
• The LCD screen contains a small amount  
of liquid crystal. Some fluorescent tubes  
used in this TV set also contain mercury.  
Follow your local ordinances and  
regulations for disposal.  
Handling and cleaning the  
screen surface/cabinet of  
the TV set  
environment and human health, which  
could otherwise be caused by  
inappropriate waste handling of this  
product. The recycling of materials will  
help to conserve natural resources. For  
more detailed information about recycling  
of this product, please contact your local  
Civic Office, your household waste  
disposal service or the shop where you  
purchased the product.  
Be sure to unplug the mains lead connected  
to the TV set from mains socket before  
cleaning.  
To avoid material degradation or screen  
coating degradation, observe the following  
precautions.  
• To remove dust from the screen surface/  
cabinet, wipe gently with a soft cloth. If  
dust is persistent, wipe with a soft cloth  
slightly moistened with a diluted mild  
detergent solution.  
• Never use any type of abrasive pad,  
alkaline/acid cleaner, scouring powder,  
or volatile solvent, such as alcohol,  
benzene, thinner or insecticide. Using  
such materials or maintaining prolonged  
GB  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote and TV Controls/Indicators  
Remote and TV controls  
In case of KDL-46/40/37/32W5820/5830/5840, please refer to the separate leaflet.  
Buttons on the TV will work the same as those on the remote.  
* In the TV menu, these buttons will work as F/f/G/g/  
z
.
• The number 5, N, PROG + and AUDIO buttons on the remote  
have a tactile dot. Use the tactile dots as a reference when operating  
the TV.  
Button/Switch  
Description  
1 "/1 (TV  
Press to turn the TV on and off from standby  
mode.  
standby)  
2 1 (Power)  
Press to turn the TV on or off.  
~
• To turn the TV completely off (0 W, no  
power consumption), turn off the TV, then  
unplug the mains lead/AC power cord from  
the mains/AC power.  
3
EXIT  
Exit from the current application and go back  
to normal TV mode.  
4 AD  
Press to set Audio Description to "On" or  
"Off".  
5
/
(Info/  
Each time you press the button, the display  
Text reveal) changes as follows:  
In digital mode: Details of the current  
programme t Details of the next programme  
(only for Sony Guide)  
In analogue mode: Current channel number  
and screen mode t Clock information  
In Text mode: Reveals hidden information  
(e.g. answers to a quiz) (page 15).  
GB  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 F/f/G/g/  
Press F/f/G/g to move the on-screen cursor.  
Press to select/confirm the highlighted item.  
When playing a photo file: Press to pause/  
start a slideshow. Press F/G to select the  
previous file. Press f/g to select the next file.  
When playing a music/video file: Press  
to  
pause/start the playback. Press and hold G/g to  
fast forward/fast reverse, then release the button  
at the point where you want to resume playback.  
Press F to start playback from the beginning of  
the current file. Press f to go to the next file.  
7 OPTIONS  
Press to display a list that contains “Device  
Control” or shortcuts to some setting menus.  
Use the “Device Control” menu to operate  
equipment that is compatible with Control for  
HDMI.  
The listed options vary depending on the input  
source.  
8 HOME  
Press to display the TV Home Menu.  
9 Coloured  
When the coloured buttons are available, an  
operation guide appears on the screen.  
buttons  
q; Number  
In TV mode: Press to select channels. For  
channel numbers 10 and above, press the next  
digit quickly.  
buttons  
~
• Use alphanumeric buttons when needed.  
In Text mode: Press to enter a page number.  
qa  
(Favourite) Press to display the Favourite List that you have  
specified.  
qs PROG +/–/  
In TV mode: Press to select the next (+) or  
previous (–) channel.  
In Text mode: Press to select the next ( ) or  
previous ( ) page.  
/
qd  
(Subtitle  
setting)  
Press to change the subtitle language (in digital  
mode only).  
qf % (Mute)  
Press to mute the sound. Press again to restore  
the sound.  
z
• In standby mode, if you want to turn on the  
TV without sound, press this button.  
qg 2 +/–  
Press to adjust the volume.  
(Volume)  
qh / (Text)  
Press to display text information.  
qj RETURN/  
Press to return to the previous screen of the  
displayed menu.  
BACK  
When playing a photo/music/video file: Press to  
stop the playback. (The display returns to the  
file or folder list.)  
qk  
GUIDE  
(EPG)  
Press to display the Digital Electronic  
Programme Guide (EPG).  
GB  
(Continued)  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ql DIGITAL  
Switches from analogue mode to the last  
selected digital mode (DVB-S or Antenna/  
Cable). Toggles between two digital modes  
(DVB-S and Digital (Antenna/Cable)) when  
the TV set operates in Digital mode.  
When viewing pictures from connected  
equipment: Press to return to normal TV mode.  
w; ANALOG  
Press to display the analogue channel that was  
last viewed.  
When viewing pictures from connected  
equipment: Press to return to normal TV mode.  
wa BRAVIA  
m/N/X/M/x: You can operate the  
BRAVIA Sync-compatible equipment that is  
connected to the TV.  
Sync  
SYNC MENU: Displays the menu of  
connected HDMI equipment. While viewing  
other input screens or TV programmes,  
“HDMI Device Selection” is displayed when  
the button is pressed.  
THEATRE: You can set Theatre Mode to on  
or off. When Theatre Mode is set to on, the  
optimum sound quality (if the TV is connected  
with an audio system using an HDMI cable)  
and picture quality for film-based contents are  
automatically set.  
~
• If you turn the TV off, Theatre Mode is also  
turned off.  
• When you change the “Scene Select” setting,  
Theatre Mode turns off automatically.  
• “Control for HDMI” (BRAVIA Sync) is only  
available with the connected Sony equipment  
that has the BRAVIA Sync or BRAVIA  
Theatre Sync logo or is compatible with  
Control for HDMI.  
ws  
wd  
/
(Input In TV mode: Press to display a list of inputs.  
select/Text  
hold)  
In Text mode: Press to hold the current page.  
(Screen  
mode)  
Press to change the screen format (page 15).  
GB  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Indicators  
Indicator  
Description  
1 Light sensor  
Do not put anything over the sensor, doing so may affect its function.  
2 Remote control  
Receives signals from the remote.  
Do not put anything over the sensor. The sensor may not work properly.  
sensor  
3
(Picture Off / Lights up in green when you select “Picture Off”.  
Timer)  
Lights up in orange when you set the timer.  
Lights up in red when the TV is in standby mode.  
Lights up in green when the TV is on.  
4 1 (Standby)  
5 " (Power)  
About the operation guide on the TV screen  
Operation Guide  
Example: Press  
or RETURN/ BACK (see 6 (page 11) or qj (page 11)).  
The operation guide provides help on how to operate the TV using the remote, and is displayed at  
the bottom of the screen. Use the remote buttons shown on the operation guide.  
GB  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
To select a digital programme using the  
Digital Electronic Programme Guide  
(EPG).  
Watching TV  
In digital mode  
An information banner appears briefly.  
The following icons may be indicated on  
the banner.  
: Interactive service is available  
(MHEG Digital Text)  
: Interactive service (MHEG Digital  
Text) is currently disabled  
: Radio service  
: Scrambled/Subscription service  
:
Multiple audio languages available  
: Subtitles available  
: Subtitles available for the hearing  
impaired  
2
: Recommended minimum age for  
current programme (ages from 4 to  
18)  
: Parental lock  
To access Digital Text  
Many broadcasters provide a Digital Text  
service. Digital Text offers graphically rich  
contents, compared to Analogue Text.  
Select a digital channel which provides Digital  
Text, then press /.  
When a broadcaster provides a dedicated  
Digital Text channel, select this channel to  
access Digital Text.  
3
3
To navigate through Digital Text, follow the  
instructions on the screen.  
To exit Digital Text, press RETURN/ BACK.  
To move around, press F/f/G/g.  
To select items, press and the number  
buttons.  
1
2
Press 1 on the TV to turn on the TV.  
When the TV is in standby mode (the 1  
(standby) indicator on the TV front panel  
is red), press "/1 on the remote to turn on  
the TV.  
To access shortcuts, press the coloured  
buttons.  
Press DIGITAL to switch to digital or  
satellite mode, or press ANALOG to  
switch to analogue mode.  
The available channels vary depending on  
the mode.  
3
Press the number buttons or PROG +/– to  
select a TV channel.  
GB  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To access Analogue Text  
14:9*  
In analogue mode, press /. Each time you  
press /, the display changes cyclically as  
follows:  
Text and TV picture t Text t No Text (exit  
the Text service)  
Displays the 14:9  
picture in the correct  
proportion. As a result,  
side bars are shown on  
the screen.  
To select a page, press the number buttons or  
* Parts of the top and bottom of the picture may be cut off.  
You can adjust the vertical position of the picture. Press  
F/f to move the picture up or down (e.g. to read  
subtitles).  
/
.
To hold a page, press  
To reveal hidden information, press  
.
.
z
~
• You can also jump directly to a page by selecting  
the page number displayed on the screen. Press  
and F/f/G/g to select the page number, then press  
.
• When four coloured items appear at the bottom of  
the Text page, you can access pages quickly and  
easily (FasText). Press the corresponding coloured  
button to access the page.  
• When you select “Smart”, some characters and/or  
letters at the top and the bottom of the picture may  
not be visible. In such a case, adjust “Vertical  
Size” in the “Screen” menu.  
z
• When “Auto Format” is set to “On”, the TV  
automatically selects the best mode to suit the  
broadcast.  
• If 720p, 1080i or 1080p source pictures are  
displayed with black borders on the screen edges,  
select “Smart” or “Zoom” to adjust the pictures.  
To change the Screen Format manually  
Press  
repeatedly to select the desired  
Screen Format.  
SCENE  
When you select the desired scene option, the  
optimum sound quality and picture quality for the  
selected scene are automatically set.  
Press F/f/G/g to select the scene option, then press  
.
Cinema: Delivers picture scenes just like those in a  
theatre-like atmosphere with dynamic sound.  
Photo: Delivers picture scenes that authentically  
reproduces the texture and colour of a printed  
photo.  
Smart*  
Enlarges the centre  
portion of the picture.  
The left and right edges  
of the picture are  
stretched to fill the 16:9  
screen.  
4:3  
Sports: Delivers picture scenes that let you  
experience realistic picture and sound like those in a  
stadium.  
Music: Delivers sound effects that let you  
experience dynamic and clear sound like that at a  
concert.  
Displays the 4:3 picture  
in its original size. Side  
bars are shown to fill  
the 16:9 screen.  
Wide  
Game: Delivers picture scenes that let you enjoy  
your game-playing experience to the fullest with  
superb picture and sound quality.  
Graphics: Delivers picture scenes that ease your  
prolonged monitor viewing experience and reduce  
fatigue by displaying clearer detailed pictures.  
General: Current user settings.  
Auto: The optimum sound quality and picture  
quality are automatically set according to the input  
source, though there may not be any effect  
depending on the connected devices.  
Stretches the 4:3  
picture horizontally, to  
fill the 16:9 screen.  
Zoom*  
Displays the  
cinemascopic (letter  
box format) picture in  
the correct proportion.  
~
• In Digital mode, "Scene" options are applied  
independently for HD (High-definition) and SD  
(Standard-definition) pictures.  
• When you set Theatre Mode (page 12) to on, the  
“Scene Select” setting switches to “Cinema”  
automatically.  
GB  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Instruction Manual  
Instruction Manual  
Displays the instruccion manual on the screen.  
Navigating through the Instruction Manual  
1
Press HOME to display the XMB™.  
Media Category Bar  
Category Object Bar  
2
3
4
Press G/g to select Settings.  
Press F/f to select Instruction Manual, then press  
.
Press F/f to select topic from the Table of Contents, then press  
Use the corresponding coloured button to go to next or previous page and to return to Table of  
Contents.  
.
If the explanation is linked to other topic, the symbol will appear. Press F/f/G/g to select  
then press . Press RETURN/BACK to go back.  
5
Press HOME to exit.  
~
• The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen.  
GB  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Additional Information  
Installing the Accessories (Wall-Mount Bracket)  
To Customers:  
For product protection and safety reasons, Sony strongly recommends that installing of your TV be  
performed by Sony dealers or licensed contractors. Do not attempt to install it yourself.  
To Sony Dealers and Contractors:  
Provide full attention to safety during the installation, periodic maintenance and examination of this  
product.  
Your TV can be installed using the SU-WL500 Wall-Mount Bracket (sold separately).  
Refer to the Instructions supplied with the Wall-Mount Bracket to properly carry out the  
installation.  
Refer to “Detaching the Table-Top Stand from the TV” (page 7).  
Refer to “TV installation dimensions table” (page 18).  
Refer to “Screw and Hook locations diagram/table” (page 19).  
~
• Place the TV on the Table-Top Stand, when securing the Mounting Hook.  
Screw  
(+PSW  
6 × 16)  
Square hole  
Mounting Hook  
Sufficient expertise is required for installing this product, especially to determine the strength of  
the wall for withstanding the TV’s weight. Be sure to entrust the attachment of this product to  
the wall to Sony dealers or licensed contractors and pay adequate attention to safety during the  
installation. Sony is not liable for any damage or injury caused by mishandling or improper  
installation.  
GB  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
TV installation dimensions table  
Screen centre point  
Unit: cm  
Screen  
centre  
dimension  
Length for each mounting angle  
Display  
dimensions  
Model Name  
Angle (0°)  
Angle (20°)  
A
B
C
D
E
F
G
H
126.2  
126.2  
112.3  
112.3  
98.7  
82.2  
82.3  
72.3  
72.5  
63.6  
63.8  
60.0  
60.2  
53.6  
3.9  
3.9  
47.8  
47.8  
47.1  
47.1  
46.3  
46.3  
46.3  
46.3  
46.3  
46.3  
16.9  
16.9  
15.0  
15.0  
14.7  
14.7  
14.5  
14.5  
14.3  
14.3  
40.7  
40.9  
35.8  
35.9  
32.8  
33.0  
31.4  
31.6  
29.1  
29.2  
77.8  
77.8  
68.5  
68.6  
60.4  
60.4  
57.0  
57.0  
51.1  
51.1  
51.5  
51.5  
50.2  
50.3  
49.3  
49.3  
49.3  
49.3  
49.2  
49.2  
KDL-52V58xx  
KDL-52W58xx  
KDL-46V58xx  
KDL-46W58xx  
KDL-40V58xx  
KDL-40W58xx  
KDL-37V58xx  
KDL-37W58xx  
KDL-32V58xx  
KDL-32W58xx  
8.4  
8.4  
12.2  
12.2  
14.0  
14.0  
17.2  
98.7  
91.7  
91.7  
79.8  
79.8  
Figures in the above table may differ slightly depending on the installation.  
WARNING  
The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of  
the TV. Refer to “Specifications” (page 20) for its weight.  
GB  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Screw and Hook locations diagram/table  
Model Name  
KDL-52V58xx  
Screw location  
Hook location  
d, g  
d, g  
d, g  
d, g  
d, g  
d, g  
d, g  
d, g  
e, g  
e, g  
b
b
b
b
b
b
b
b
c
c
KDL-52W58xx  
KDL-46V58xx  
KDL-46W58xx  
KDL-40V58xx  
KDL-40W58xx  
KDL-37V58xx  
KDL-37W58xx  
KDL-32V58xx  
KDL-32W58xx  
Screw location  
Hook location  
When installing the Mounting Hook on the TV.  
When installing the TV onto the Base Bracket.  
a
b
c
GB  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Specifications  
System  
LCD (Liquid Crystal Display) Panel  
Panel system  
TV system  
Analogue: Depending on your country/area selection: B/G/H, D/K, L, I  
Digital: DVB-T/DVB-C  
Satellite: DVB-S/DVB-S2  
Analogue: PAL, PAL60 (only video input), SECAM, NTSC3.58, NTSC4.43 (only video input)  
Digital: MPEG-2 MP@ML/HL, H.264/MPEG-4 AVC MP/HP@L4  
Colour/video system  
Channel coverage  
Analogue: VHF: E2–E12/UHF: E21–E69/CATV: S1–S20/HYPER: S21–S41  
D/K: R1–R12, R21–R69/L: F2–F10, B–Q, F21–F69/I: UHF B21–B69  
Digital: VHF/UHF  
Satellite: IF Frequency 950-2150 MHz  
10 W + 10 W  
Sound output  
Input/Output jacks  
Aerial/Antenna cable  
Satellite antenna  
75 ohm external terminal for VHF/UHF  
Female F-Type Connector IEC169-24, 75 ohm.  
DiSEqC 1.0, LNB 13V/18V & 22KHz tone  
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and TV audio/video  
output.  
/
/
AV1  
/
21-pin scart connector (CENELEC standard) including audio/video input, RGB input and selectable audio/  
video output.  
AV2  
Supported formats: 1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
Y: 1 Vp-p, 75 ohms, 0.3V negative sync/PB/CB: 0.7 Vp-p, 75 ohms/  
PR/CR: 0.7 Vp-p, 75 ohms  
COMPONENT IN  
Audio input (phono jacks)  
COMPONENT IN  
HDMI IN1, 2, 3, 4  
Video: 1080/24p, 1080p, 1080i, 720p, 576p, 576i, 480p, 480i  
Audio: Two channel linear PCM: 32, 44.1 and 48 kHz, 16, 20 and 24 bits, Dolby Digital  
Analogue audio input (minijack) (HDMI IN1 only)  
PC Input (page 22)  
Video input (phono jack)  
AV3  
AV3  
Audio input (phono jacks)  
Digital optical jack (Two channel linear PCM, Dolby Digital)  
DIGITAL AUDIO  
OUT (OPTICAL)  
Audio output (phono jacks)  
PC Input (D-sub 15-pin) (page 22)  
PC IN  
G: 0.7 Vp-p, 75 ohms, non Sync on Green/B: 0.7 Vp-p, 75 ohms/  
R: 0.7 Vp-p, 75 ohms/HD: 1-5 Vp-p/VD: 1-5 Vp-p  
PC audio input (minijack)  
USB port  
Headphones jack  
i
CAM (Conditional Access Module) slot  
10BASE-T/100BASE-TX connector (Depending on the operating environment of the network, connection  
speed may differ. 10BASE-T/100BASE-TX communication rate and communication quality are not  
guaranteed for this TV.)  
LAN  
GB  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Model name  
KDL-  
KDL-  
KDL-  
KDL-  
KDL-  
52V58xx,  
52W58xx  
46V58xx,  
46W58xx  
40V58xx,  
40W58xx  
37V58xx,  
37W58xx  
32V58xx,  
32W58xx  
Power and others  
220 V – 240 V AC, 50 Hz  
52 inches / Approx. 46 inches / Approx. 40 inches / Approx. 37 inches / Approx. 32 inches / Approx.  
Power requirements  
Screen size (measured  
diagonally)  
132 cm  
117 cm  
102 cm  
94 cm  
81 cm  
1,920 dots (horizontal) × 1,080 lines (vertical)  
Display resolution  
156 W (KDL-  
52V58xx)  
164 W (KDL-  
52W58xx)  
123 W (KDL-  
46V58xx)  
142 W (KDL-  
46W58xx)  
111 W (KDL-  
40V58xx)  
110 W (KDL-  
40W58xx)  
112 W (KDL-  
37V58xx)  
117 W (KDL-  
37W58xx)  
77 W (KDL-  
32V58xx)  
71 W (KDL-  
32W58xx)  
Power  
in “Home”/  
consumption “Standard”  
mode  
254 W (KDL-  
52V58xx)  
261 W (KDL-  
52W58xx)  
203 W (KDL-  
46V58xx)  
221 W (KDL-  
46W58xx)  
177 W (KDL-  
40V58xx)  
172 W (KDL-  
40W58xx)  
169 W (KDL-  
37V58xx)  
179 W (KDL-  
37W58xx)  
109 W (KDL-  
32V58xx)  
99 W (KDL-  
32W58xx)  
in “Shop”/  
“Vivid”  
mode  
0.17 W (17 W when “Quick Start” is set to “On”)  
Standby power  
consumption*  
1
228 kWh (KDL-  
52V58xx)  
239 kWh (KDL-  
52W58xx)  
179 kWh (KDL-  
46V58xx)  
207 kWh (KDL-  
46W58xx)  
162 kWh (KDL-  
40V58xx)  
161 kWh (KDL-  
40W58xx)  
163 kWh (KDL-  
37V58xx)  
171 kWh (KDL-  
37W58xx)  
112 kWh (KDL-  
32V58xx)  
103 kWh (KDL-  
32W58xx)  
Average anual energy  
consumption*  
2
See “To check the accessories” (page 4).  
SU-WL500  
Supplied accessories  
Optional  
Wall-Mount  
accessories Bracket  
Model  
name  
KDL-  
52V58xx,  
52W58xx  
KDL-  
46V58xx,  
46W58xx  
KDL-  
40V58xx,  
40W58xx  
KDL-  
37V58xx,  
37W58xx  
KDL-  
32V58xx,  
32W58xx  
Dimensions (Approx.) (w × h × d)  
126.2 x 86.9 x 35.8 cm 112.3 x 77.1 x 33.0 cm 98.7 x 68.4 x 30.3 cm  
(KDL-52V58xx) (KDL-46V58xx) (KDL-40V58xx)  
126.2 x 87.1 x 35.8 cm 112.3 x 77.2 x 33.0 cm 98.7 x 68.6 x 30.3 cm  
91.7 x 64.8 x 30.3 cm  
(KDL-37V58xx)  
91.7 x 64.9 x 30.3 cm  
(KDL-37W58xx)  
79.8 x 58.4 x 25.9 cm  
(KDL-32V58xx)  
79.8 x 58.5 x 25.9 cm  
(KDL-32W58xx)  
with  
Table-  
Top  
(KDL-52W58xx)  
(KDL-46W58xx)  
(KDL-40W58xx)  
Stand  
126.2 x 82.2 x 11.5 cm 112.3 x 72.3 x 9.6 cm  
(KDL-52V58xx) (KDL-46V58xx)  
126.2 x 82.3 x 11.5 cm 112.3 x 72.5 x 9.6 cm  
98.7 x 63.6 x 9.3 cm  
(KDL-40V58xx)  
98.7 x 63.8 x 9.3 cm  
(KDL-40W58xx)  
91.7 x 60.0 x 9.1 cm  
(KDL-37V58xx)  
91.7 x 60.2 x 9.1 cm  
(KDL-37W58xx)  
79.8 x 53.6 x 8.9 cm  
(KDL-32V58xx)  
79.8 x 53.7 x 8.9 cm  
(KDL-32W58xx)  
without  
Table-  
Top  
(KDL-52W58xx)  
(KDL-46W58xx)  
Stand  
Mass (Approx.)  
35.0 kg (KDL-  
52V58xx)  
35.5 kg (KDL-  
52W58xx)  
27.0 kg (KDL-  
46V58xx)  
27.5 kg (KDL-  
46W58xx)  
20.5 kg (KDL-  
40V58xx)  
21.0 kg (KDL-  
40W58xx)  
18.0 kg (KDL-  
37V58xx)  
18.5 kg (KDL-  
37W58xx)  
14.5 kg (KDL-  
32V58xx)  
15.0 kg (KDL-  
32W58xx)  
with  
Table-  
Top  
Stand  
30.5 kg (KDL-  
52V58xx)  
31.0 kg (KDL-  
52W58xx)  
23.5 kg (KDL-  
46V58xx)  
24.0 kg (KDL-  
46W58xx)  
17.5 kg (KDL-  
40V58xx)  
18.0 kg (KDL-  
40W58xx)  
15.0 kg (KDL-  
37V58xx)  
15.5 kg (KDL-  
37W58xx)  
12.0 kg (KDL-  
32V58xx)  
12.5 kg (KDL-  
32W58xx)  
without  
Table-  
Top  
Stand  
1
*
*
Specified standby power is reached after the TV finishes necessary internal processes.  
4 hours a day and 365 days a year.  
2
Design and specifications are subject to change without notice.  
GB  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC input signal reference chart for  
PC and HDMI IN 1, 2, 3, 4  
Resolution  
Horizontal  
frequency (kHz) frequency (Hz)  
Vertical  
Standard  
VESA  
Signals  
Horizontal  
(Pixel)  
640  
×
Vertical  
(Line)  
VGA  
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
×
480  
31.5  
37.5  
31.5  
37.9  
46.9  
48.4  
56.5  
60.0  
45.0  
47.4  
47.8  
60.0  
47.7  
64.0  
66.6  
67.5  
60  
75  
70  
60  
75  
60  
70  
75  
60  
60  
60  
60  
60  
60  
60  
60  
640  
720  
480  
400  
600  
600  
768  
768  
768  
720  
768  
768  
960  
768  
1024  
1080  
1080  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA  
EIA  
SVGA  
XGA  
800  
800  
1024  
1024  
1024  
1280  
1280  
1280  
1280  
1360  
1280  
1920  
1920  
WXGA  
VESA  
VESA  
VESA  
VESA  
VESA  
VESA*  
EIA*  
SXGA  
HDTV  
* 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This  
affects the “Video Settings” menu and “Screen” menu settings.  
To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.  
~
• This TV’s PC input does not support Sync on Green or Composite Sync.  
• This TV’s PC input does not support interlaced signals.  
• For the best picture quality, it is recommended to use the signals in the above chart with a 60 Hz vertical  
frequency (boldfaced).  
GB  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting  
Check whether the 1 (standby) indicator is flashing in red.  
When the 1 (standby) indicator is flashing  
The self-diagnosis function is activated.  
1
Count how many times the 1 (standby) indicator flashes between each two second break.  
For example, the indicator may flash three times, go off for two seconds, then flash again three  
times.  
2
Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony  
service centre of how the indicator flashes (number of flashes).  
When the 1 (standby) indicator is not flashing  
1
2
Check the items in the tables below.  
If the problem persists, have your TV serviced by qualified service personnel.  
Condition  
Explanation/Solution  
Picture  
There is no picture (screen is • Check the aerial/antenna/cable connection.  
dark) and no sound.  
• Connect the TV to the mains/AC power, and press 1 on the TV.  
• If the 1 (standby) indicator lights up in red, press "/1.  
No picture or menu  
• Press to display the list of inputs, then select the desired input.  
information from equipment • Check the connection between the optional equipment and the TV.  
connected to the scart  
connector appears on the  
screen.  
Ghosting occurs, or double  
images appear.  
• Check the aerial/antenna/cable connection.  
• Check the aerial/antenna location and direction.  
Only snow and noise appear • Check if the aerial/antenna is broken or bent.  
on the screen. • Check if the aerial/antenna has reached the end of its serviceable life  
(three to five years for normal use, one to two years when used at the  
seaside).  
There is picture or sound noise • Adjust “AFT” (Automatic Fine Tuning) to obtain better picture  
when viewing a TV channel.  
reception.  
Tiny black points and/or  
bright points appear on the  
screen.  
• The screen is composed of pixels. Tiny black points and/or bright points  
(pixels) on the screen do not indicate a malfunction.  
The picture contours are  
distorted.  
• Select “Standard” or “Off” in “Motionflow” (except for KDL-52V58xx,  
46V58xx, 40V58xx, 37V58xx, 32V58xx).  
• Change the current setting of “Film Mode” to other settings.  
The picture is not displayed in • Select “Reset”.  
colour.  
The picture from equipment • Check the connection of the  
COMPONENT IN sockets and check if  
connected to the  
the sockets are firmly seated in their respective sockets.  
COMPONENT IN  
sockets is not displayed in  
colour, or is displayed in  
irregular colours.  
GB  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Condition  
Explanation/Solution  
No picture from the connected • Turn the connected equipment on.  
equipment appears on the  
screen.  
• Check the cable connection.  
• Press  
to display the list of inputs, then select the desired input.  
• Correctly insert the memory card or other storage device in the digital  
still camera.  
• Use a digital still camera memory card or other storage device that has  
been formatted according to the instruction manual supplied with the  
digital still camera.  
• Operations are not guaranteed for all USB devices. Also, operations  
differ depending on the features of the USB device and the video being  
played.  
You cannot select the  
• Check the cable connection.  
connected equipment on the • Set the server to be displayed on the Home Menu.  
Home Menu or you cannot  
switch the input.  
Sound  
The picture is good, but there • Press 2 +/– or % (Mute).  
is no sound. • Check if the “Speaker” is set to “TV Speaker”.  
• When using HDMI input with Super Audio CD or DVD-Audio,  
DIGITAL AUDIO OUT (OPTICAL) may not output audio signals.  
Channels  
You cannot select your  
desired channel.  
• Switch between digital and analogue mode, and select the desired  
digital/analogue channel.  
Some channels are blank.  
• The channel is for scrambled/subscription service only. Subscribe to a  
pay TV service.  
• The channel is used only for data (no picture or sound).  
• Contact the broadcaster for transmission details.  
You cannot view digital  
channels.  
• Contact a local installer to find out if digital transmissions are provided  
in your area.  
• Upgrade to a higher gain aerial/antenna.  
Home Network  
Connection diagnostic results  
indicate a failure.  
Check Connections  
• Use a straight cable for the LAN cable.  
• Check if the cable is connected firmly.  
• Check the connection between the TV and the router.  
Check Settings  
• Change the IP address for the DNS server (“Checking the Network  
Connection”) while referring to the following.  
–Contact your Internet service provider.  
–Specify the IP address of the router if you do not know the DNS of  
your Internet service provider.  
The server cannot be found, a • Once server settings are changed, turn the TV off and on by pressing 1  
list cannot be retrieved, and  
playback fails.  
on the TV.  
• Execute “Server Diagnostics”.  
When using a PC as the server  
• Check if the PC is turned on. Do not turn off the PC while accessing.  
• If security software is installed on the PC, be sure to allow connections  
from external devices. For details, refer to the manual supplied with your  
security software.  
• The load on the PC may be too high or the server application may  
become unstable. Try the following:  
–Stop the server application and restart it.  
–Restart the PC.  
–Reduce the number of applications running on the PC.  
–Reduce the amount of content.  
GB  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
Changes on the server are not • Sometimes changes are not applied to displays on the TV even though  
being applied or displayed  
content differs from content  
on the server.  
content has been added and/or deleted on the server. If this happens, go  
back up one level and try opening the folder or server again.  
Photo, music and/or video  
files do not appear or icons are  
not displayed.  
Preliminary Check  
• Check that the connected device supports DLNA.  
• Operations are not guaranteed for all servers. Also, operations differ  
depending on the features of the server and the content in question.  
• Turn the connected device on.  
Check Connections  
• Check that the LAN cable and/or mains lead/AC power cord of the  
server has not become disconnected.  
Check Settings  
• Check that the connected device is registered under “Server Display  
Settings”.  
• Check that the server is correctly configured.  
• Check that the selected device is connected to the network and can be  
accessed.  
• If the “IP Address Settings” in “Network” under “Network Settings” is  
set to “DHCP (DNS automatic)” or “DHCP (DNS manual)”, it may take  
some time to recognise devices if there is no DHCP server. Execute  
“Server Diagnostics”.  
The TV cannot be found from  
renderer-compatible device  
(the controller).  
Check Connections  
• Check that the LAN cable and/or mains lead of the server has not  
become disconnected.  
Check Settings  
• Check if the “Renderer Function” is activated.  
• Check that the connected device is registered under “Renderer Access  
Control”.  
Only a few icons appear under • This is normal when internet connection is not available.  
the "Network" in the Home  
Menu.  
You can use three pre-installed Widgets properly. To enjoy more  
Widgets, please check that the LAN cable and/or mains lead/AC power  
cord of the router/modem has not become disconnected. (*)  
You have been using  
registered Widgets, but now  
• Check that the LAN cable and/or mains lead/AC power cord of the  
router/modem has not become disconnected. (*)  
some contents won't appear on • There's a possibility that the Widget Provider's server is out of service.  
the Widgets.  
Please try using the Widget later.  
(*) Your router/modem must be properly set to connect to the internet in  
advance. Please contact your Internet Service Provider for the router/  
modem settings.  
General  
Auto Setup (freesat) is  
• Check connections and dish alignment. The dish needs to be pointing at  
stopped before it is completed. Astra 2 at 28.2° East, and Eurobird 1 at 28.5° East.  
• If the problem persists, consult your freesat registered retailer or call  
Some programmes cannot be • Check the aerial or dish.  
tuned.  
• The satellite cable might be short-circuited or there might be connection  
problems of the cable. Please check the cable and connection and then  
turn the TV Off with the Mains power On / Off switch, and turn it On  
again.  
• The frequency you entered is out of range. Please consult the received  
satellite broadcasting company.  
Distorted picture and/or  
sound.  
• Keep the TV away from electrical noise sources such as cars,  
motorcycles, hair-dryers or optical equipment.  
• When installing optional equipment, leave some space between the  
optional equipment and the TV.  
• Check the aerial/cable connection.  
• Keep the aerial/cable TV cable away from other connecting cables.  
GB  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Condition  
Explanation/Solution  
The TV turns off  
automatically (the TV enters  
standby mode).  
• Check if the “Sleep Timer” is activated, or confirm the “Duration”  
setting of “On Timer”.  
• Check if the “Idle TV Standby” is activated.  
• If no signal is received and no operation is performed in the TV mode  
for 30 minutes, the TV automatically switches to standby mode.  
The TV turns on  
automatically.  
• Check if the “On Timer” is activated.  
Some input sources cannot be • Select “AV Preset” and cancel the “Skip” setting for the input source.  
selected.  
The remote does not function. • Replace the batteries.  
HDMI equipment does not  
appear on “HDMI Device  
List”.  
• Check that your equipment is compatible with Control for HDMI.  
You cannot select “Off” in  
“Control for HDMI”.  
• If you have connected any audio system that is compatible with Control  
for HDMI, you cannot select “Off” in this menu. If you want to change  
the audio output to the TV speaker, select “TV Speaker” in the  
“Speaker” menu.  
Not all channels are tuned for • Check the support website for cable provide information.  
cable.  
GB  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Keep this Instruction  
manual safe you’ll  
need it  
Television in the UK is going digital, bringing us all more.  
Please see overleaf to find out when your area switches to digital.  
Digital UK is the independent, non-profit organisation leading the process of digital TV switchover  
in the UK. Digital UK provides impartial information on what people need to do to prepare for the  
move to digital, and when they need to do it.  
How the switchover affects your TV equipment:  
Your new TV has a digital tuner built in, which means it is ready to receive the Freeview signal by  
simply plugging it into your aerial socket (check if you can get digital TV through your aerial now,  
or whether you'll have to wait until switchover, at www.digitaluk.co.uk).  
When the TV switchover happens in your area, there are at least two occasions when you will need  
to re-tune your TV in order to continue receiving your existing TV channels, and also to pick up  
new ones. Digital UK, the body leading the digital TV switchover, will advise you when you need  
to re-tune during the switchover.  
GB  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
How to re-tune:  
1
2
3
4
5
6
Press "HOME" on the remote  
Press G/g to select "Settings"  
Press F/f to select "Digital Set-up", then press  
Press to select "Digital Auto Tuning"  
Press G to select "Yes" then press to start "Digital Auto Tuning"  
Follow the on screen instructions.  
If you are missing any channels, it may be that they are not available in your area, or that your aerial  
needs upgrading.  
If you have any questions, please contact Sony on 08705 111 999 or call Digital UK on 0845 6 50  
50 50 or visit www.digitaluk.co.uk  
†Calls charged at BT rate of 3p per minute daytime and 1p per minute evenings and weekends.  
Rates may vary for calls from non-BT lines.  
GB  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sony Graphics Tablet E2124 User Manual
Sony Stereo Amplifier MONAURAL User Manual
Sony Stereo System BDV IT1000ES User Manual
Sony Video Game Console 3 285 687 13 User Manual
Sound Performance Lab Stereo Amplifier Amplifiers User Manual
SPX Cooling Technologies Humidifier SPXM 08 User Manual
State Industries Water Heater SRT80 120NE User Manual
Symphonic TV VCR Combo SC1303 SC1903 User Manual
Tanita Fitness Electronics PD642 User Manual
Tanita Scale WB 100MA User Manual