Sony Digital Photo Frame DPF V900 V700 User Manual

3-300-208-12 (2)  
Digital Photo  
Frame  
DPF-V900/V700  
Operating Instructions  
Before operating this unit, please read this manual thoroughly and  
retain it for future reference.  
Owner’s Record  
The model and serial numbers are located at the rear.  
Record the serial number in the space provided below. Refer to  
these numbers whenever you call upon your Sony dealer  
regarding this product.  
Model No. DPF-V900/V700  
Serial No. ________________________  
© 2008 Sony Corporation  
Download from Www.Somanuals.com. All Manuals Search And Download.  
– If the set does not operate normally when following  
the operating instructions. Adjust only those  
controls that are specified in the operating  
instructions. Improper adjustment of other controls  
may result in damage and will often require  
extensive work by a qualified technician to restore  
the set to normal operation.  
Installation  
Water and Moisture  
Do not use power-line operated sets near water – for  
example, near a bathtub, washbowl, kitchen sink, or  
laundry tub, in a wet basement, or near a swimming  
pool, etc.  
– When the set exhibits a distinct change in  
performance – this indicates a need for service.  
Power-Cord Protection  
Route the power cord so that it is not likely to be  
walked on or pinched by items placed upon or against  
them, paying particular attention to the plugs,  
receptacles, and the point where the cord exits from  
the appliance.  
Servicing  
Do not attempt to service the set yourself as opening  
or removing covers may expose you to dangerous  
voltage or other hazards.  
Refer all servicing to qualified service personnel.  
Accessories  
Replacement parts  
Do not place the set on an unstable cart, stand, tripod,  
bracket, or table. The set may fall, causing serious  
injury to a child or an adult, and serious damage to the  
set. Use only a cart, stand, tripod, bracket, or table  
recommended by the manufacturer.  
When replacement parts are required, be sure the  
service technician has used replacement parts  
specified by the manufacturer that have the same  
characteristics as the original parts.  
Unauthorized substitutions may result in fire, electric  
shock, or other hazards.  
Ventilation  
The slots and openings in the cabinet are provided for  
necessary ventilation. To ensure reliable operation of  
the set, and to protect it from overheating, these slots  
and openings must never be blocked or covered.  
– Never cover the slots and openings with a cloth or  
other materials.  
Safety Check  
Upon completion of any service or repairs to the set,  
ask the service technician to perform routine safety  
checks (as specified by the manufacturer) to  
determine that the set is in safe operating condition.  
– Never block the slots and openings by placing the  
set on a bed, sofa, rug, or other similar surface.  
– Never place the set in a confined space, such as a  
bookcase, or built-in cabinet, unless proper  
ventilation is provided.  
– Do not place the set near or over a radiator or heat  
register, or where it is exposed to direct sunlight.  
Lightning  
For added protection for this set during a lightning  
storm, or when it is left unattended and unused for  
long periods of time, unplug it from the wall outlet  
and disconnect the antenna or cable system. This will  
prevent damage to the set due to lightning and power-  
line surges.  
Service  
Damage Requiring Service  
Unplug the set from the wall outlet and refer servicing  
to qualified service personnel under the following  
conditions:  
– When the power cord or plug is damaged or frayed.  
– If liquid has been spilled or objects have fallen into  
the set.  
– If the set has been exposed to rain or water.  
– If the set has been subject to excessive shock by  
being dropped, or the cabinet has been damaged.  
Continued  
3 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Declaration of Conformity  
WARNING  
Trade Name:  
SONY  
Model No.:  
Responsible Party: Sony Electronics Inc.  
Address:  
DPF-V700  
Do not expose the batteries to  
excessive heat such as sunshine, fire  
or the like.  
16530 Via Esprillo, San Diego,  
CA 92127 U.S.A.  
Telephone No.:  
858-942-2230  
CAUTION  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
Replace the battery with the specified  
type only. Otherwise, fire or injury  
may result.  
For the customers in the U.S.A.  
CAUTION  
For the State of California, USA  
only  
Perchlorate Material - special handling may apply,  
See  
You are cautioned that any changes or modifications  
not expressly approved in this manual could void  
your authority to operate this equipment.  
If you have any questions about this product, you may  
call:  
Sony Customer Information Services Center  
1-800-222-SONY (7669)  
Perchlorate Material: Lithium battery contains  
perchlorate.  
The number below is for the FCC related matters  
only.  
Note:  
This equipment has been tested and found to comply  
with the limits for a Class B digital device, pursuant  
to Part 15 of the FCC Rules.  
Regulatory Information  
Declaration of Conformity  
These limits are designed to provide reasonable  
protection against harmful interference in a  
Trade Name:  
SONY  
residential installation. This equipment generates,  
uses, and can radiate radio frequency energy and, if  
not installed and used in accordance with the  
instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that  
interference will not occur in a particular installation.  
If this equipment does cause harmful interference to  
radio or television reception, which can be  
determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by  
one or more of the following measures:  
– Reorient or relocate the receiving antenna.  
– Increase the separation between the equipment and  
receiver.  
Model No.:  
Responsible Party: Sony Electronics Inc.  
Address:  
DPF-V900  
16530 Via Esprillo, San Diego,  
CA 92127 U.S.A.  
858-942-2230  
Telephone No.:  
This device complies with part 15 of the FCC  
Rules. Operation is subject to the following two  
conditions:  
(1) This device may not cause harmful  
interference, and (2) this device must accept any  
interference received, including interference that  
may cause undesired operation.  
– Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
– Consult the dealer or an experienced radio/TV  
technician for help.  
“Lamp in this product contains mercury. Disposal of  
these materials may be regulated due to  
environmental considerations. For disposal or  
recycling information, please contact your local  
authorities or the Electoronic Industries Alliance  
(www.eiae.org).”  
4 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
require a permanent connection with an incorporated  
battery, this battery should be replaced by qualified  
service staff only. To ensure that the battery will be  
treated properly, hand over the product at end-of-life  
to the applicable collection point for the recycling of  
electrical and electronic equipment. For all other  
batteries, please view the section on how to remove  
the battery from the product safely. Hand the battery  
over to the applicable collection point for the  
recycling of waste batteries.  
For the Customer in Europe  
This product has been tested and found compliant  
with the limits set out in the EMC Directive for using  
connection cables shorter than 3 meters (9.8 feet).  
Attention  
The electromagnetic fields at the specific frequencies  
may influence the picture of this digital photo frame.  
Notice  
For more detailed information about recycling of this  
product or battery, please contact your local Civic  
Office, your household waste disposal service or the  
shop where you purchased the product.  
If static electricity or electromagnetism causes data  
transfer to discontinue midway (fail), restart the  
application or disconnect and connect the  
communication cable (USB, etc) again.  
Notice for the customers in the  
countries applying EU Directives  
Disposal of Old Electrical &  
Electronic Equipment (Applicable in  
the European Union and other  
European countries with separate  
collection systems)  
The manufacturer of this product is Sony  
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-  
0075 Japan. The Authorized Representative for EMC  
and product safety is Sony Deutschland GmbH,  
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.  
For any service or guarantee matters please refer to  
the addresses given in separate service or guarantee  
documents.  
This symbol on the product  
or on its packaging indicates  
that this product shall not be  
treated as household waste.  
Instead it shall be handed  
over to the applicable  
collection point for the  
recycling of electrical and  
electronic equipment. By  
ensuring this product is  
disposed of correctly, you  
will help prevent potential  
NOTICE FOR CUSTOMERS IN  
THE UNITED KINGDOM  
A moulded plug complying with BS 1363 is fitted to  
this equipment for your safety and convenience.  
Should the fuse in the plug supplied need to be  
replaced, a fuse of the same rating as the supplied one  
and approved by ASTA or BSI to BS 1362,  
negative consequences for  
(i.e.marked with  
or mark) must be used.  
the environment and human health, which could  
otherwise be caused by inappropriate waste handling  
of this product. The recycling of materials will help to  
conserve natural resources. For more detailed  
information about recycling of this product, please  
contact your local Civic Office, your household waste  
disposal service or the shop where you purchased the  
product.  
If the plug supplied with this equipment has a  
detachable fuse cover, be sure to attach the fuse cover  
after you change the fuse. Never use the plug without  
the fuse cover. If you should lose the fuse cover,  
please contact your nearest Sony service station.  
Duplication, edition, or printing of a CD, TV  
programs, copyrighted materials such as pictures or  
publications, or any other materials except for your  
own recording or creation is limited to private or  
domestic use only. Unless you hold copyright or  
have permission of copyright holders for the  
materials to be duplicated, use of those materials  
beyond this limit may infringe the provisions of the  
copyright law and be subject to the copyright  
holders claim for damages.  
Disposal of waste batteries  
(applicable in the European Union  
and other European countries with  
separate collection systems)  
This symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not  
When using photo images with this digital photo  
frame, pay special attention not to infringe the  
provisions of the copyright law. Any unauthorized  
use or modification of there’s portrait may also  
infringe their rights.  
be treated as household waste. By  
ensuring these batteries are disposed  
of correctly, you will help prevent  
potentially negative consequences for  
the environment and human health which could  
otherwise be caused by inappropriate waste handling  
of the battery. The recycling of the materials will help  
to conserve natural resources. In case of products that  
for safety, performance or data integrity reasons  
For some demonstrations, performances, or  
exhibits, photography may be forbidden.  
Continued  
5 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• HDMI,  
, and High-Definition Multimedia  
Backup recommendations  
Interface are trademarks or registered trademarks of  
HDMI Licensing LLC.  
• Microsoft, Windows, and Windows Vista are either  
registered trademarks or trademarks of Microsoft  
Corporation in the United States and/or other  
countries.  
• Macintosh and Mac OS are registered trademarks of  
Apple Inc. in the United States and/or other  
countries.  
• Intel and Pentium are the registered trademarks or  
trademarks of Intel Corporation.  
To avoid potential risk of data loss caused by  
accidental operation or malfunction of the digital  
photo frame, we recommend that you save a  
backup copy of your data.  
Information  
IN NO EVENT SHALL SELLER BE LIABLE  
FOR ANY DIRECT, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY  
NATURE, OR LOSSES OR EXPENSES  
RESULTING FROM ANY DEFECTIVE  
PRODUCT OR THE USE OF ANY PRODUCT.  
• CompactFlash is a trademark of SanDisk  
Corporation in the U.S.A.  
Sony shall assume no responsibility for any  
accidental or consequential damages or loss of the  
recording contents which may be caused by use or  
malfunction of the digital photo frame or memory  
card.  
or xD-Picture Card™ is a trademark of  
FUJIFILM Corporation.  
is a trademark of FotoNation Inc. in the  
is a trademark of Ichikawa Soft  
U.S.A.  
Notes on LCD screen  
Laboratory.  
• The displayed image on the screen is not identical in  
picture quality and colors with the printed image  
because phosphor methods or profiles differ. Please  
regard the displayed image as just a reference.  
• Do not press against the LCD screen. The screen  
may be discolored and that may cause a  
malfunction.  
• Contains bitmap fonts from Monotype Imaging Inc.  
• All other companies and product names mentioned  
herein may be the trademarks or registered  
trademarks of their respective companies.  
Furthermore, “™” and “®” are not mentioned in  
each case in this manual.  
• Exposing the LCD screen to direct sunlight for long  
periods may cause malfunctions.  
• This unit is equipped with face recognition feature.  
Sony Face Recognition technology developed by  
Sony is used.  
• The Bluetooth word mark and logos are owned by  
the Bluetooth SIG, Inc. and any use of such marks  
by Sony Corpration is under licence. Other  
trademarks and trade names are those of their  
resective owners.  
• The LCD screen is manufactured using extremely  
high-precision technology, so over 99.99% of the  
pixels are operational for effective use. However,  
there may be some tiny black points and/or bright  
points (white, red, blue or green in color) that  
constantly appear on the LCD screen. These points  
are normal in the manufacturing process and do not  
affect the printing in any way.  
• Images may trail across on the LCD screen in a cold  
location. This is not a malfunction.  
On trademarks and copyrights  
, BRAVIA, BRAVIA Sync,  
,
“PhotoTV HD”,  
Stick”,  
, Cyber-shot, , “Memory  
, “Memory Stick Duo”,  
, “MagicGate Memory  
Stick”, “Memory Stick PRO”,  
, “Memory Stick PRO Duo”,  
, “Memory Stick PRO-HG  
, “Memory Stick  
Duo”,  
Micro”,  
ROM”,  
,
, “Memory Stick-  
, “MagicGate”, and  
are trademarks or registered  
trademarks of Sony Corporation.  
6 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notice for users  
Program © 2008 Sony Corporation  
Documentation © 2008 Sony Corporation  
All rights reserved. This manual or the software  
described herein, in whole or in part, may not be  
reproduced, translated or reduced to any machine  
readable form without prior written approval from  
Sony Corporation.  
IN NO EVENT SHALL SONY CORPORATION BE  
LIABLE FOR ANY INCIDENTAL,  
CONSEQUENTIAL OR SPECIAL DAMAGES,  
WHETHER BASED ON TORT, CONTACT, OR  
OTHERWISE, ARISING OUT OF OR IN  
CONNECTION WITH THIS MANUAL, THE  
SOFTWARE OR OTHER INFORMATION  
CONTAINED HEREIN OR THE USE THEREOF.  
By breaking the seal of the envelope of the CD-ROM  
package, you accept all the terms and conditions of  
this agreement. If you do not accept these terms and  
conditions, please return this disk envelope unopened,  
along with the rest of the package, immediately to the  
dealer where you obtained it.  
Sony Corporation reserves the right to make any  
modification to this manual or the information  
contained herein at any time without notice.  
The software described herein may also be governed  
by the terms of a separate user license agreement.  
Any design data such as sample pictures provided in  
this software cannot be modified or duplicated except  
for the purpose of personal use. Any unauthorized  
duplication of this software is prohibited under  
copyright law.  
Please note that unauthorized duplication or  
modification of portraits or copyrighted work could  
infringe the rights reserved by rights holders.  
On the illustrations and screen  
shots used in this manual  
The illustrations and screen shots used in this  
manual are of the DPF-V900 unless noted  
otherwise.  
7 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting to a high definition TV to  
Table of Contents  
Enjoy your photo frame in various  
Connecting to a high definition  
Transferring images from an external  
Connecting to the AC power  
Connecting to a computer to exchange  
Inserting a memory card and viewing  
Adjusting the image size and  
8 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before operation  
Enjoy your photo frame in various ways  
Easy display of images in a memory card or external device such as  
a digital camera  
Various display functions  
In addition to slideshows, you can enjoy various display modes easily including the  
single image, index, clock, and calendar modes. (.page 22)  
Adding important images to an album (saving to the internal memory)  
Images added to the album are saved in the internal memory. You can also export  
these images to a memory card or external device.  
Input to the photo frame  
As shown on the left, the photo frame gives  
priority in order of computer, external device,  
and memory card if computer and memory  
cards are connected/inserted to the photo  
frame. If multiple memory cards are inserted,  
the images of the memory card you inserted  
first are displayed.  
10 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Enjoying images on a large TV screen  
If you connect the photo frame to a TV with an HDMI cable, you can enjoy  
slideshows and single image display on a large screen.  
Various devices you can use  
Connecting to your computer  
Images can be copied from a computer easily.  
You can also save images in the album to a  
computer as a backup. Images can also be  
exchanged with a memory card, USB memory,  
etc. and copied from a Bluetooth compatible  
device.  
11 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
xVarious display functions  
You can enjoy various view modes, such as  
displaying an analog clock, digital clock or  
calendar. And the photo frame can display  
images on single image display, index image  
display, zoom in/zoom out or fit to screen  
mode.  
xAutomatic rotation of images  
The photo frame automatically rotates  
images to their proper orientation. Images  
are also automatically rotated when the  
photo frame is set in either the portrait or  
landscape position.  
xEasy operation by remote control  
xAdding images to internal memory  
The images you add to the album are saved  
to internal memory.  
xExporting images  
You can export images in the album to your  
memory card.  
Features  
The Sony DPF-V900/V700 is a digital photo  
frame for easily displaying images taken with a  
digital camera or other device without using a  
computer.  
xSupport for various memory cards  
Supports various memory cards used by  
digital cameras and other devices, such as a  
“Memory Stick”, CompactFlash card, SD  
memory card, and xD-Picture Card. Just  
insert a memory card removed from a digital  
camera or other device, then you will be able  
to view the images immediately.  
xEasy transfer of images taken with a  
Bluetooth compatible mobile phone  
or other device  
You can transfer images to the photo frame’s  
internal memory from a Bluetooth  
compatible device via a Bluetooth adaptor  
(optional).  
xAUTO TOUCH-UP features  
You can enjoy beautiful images by  
automatic corrections of backlight, focus,  
red-eye, and skin smoothing.  
xConnecting to a computer to  
exchange the images  
xSupport for mass storage compatible  
devices  
xConnecting to a high definition TV to  
display images on a large screen  
Using the photo frame’s HDMI output  
connector, you can enjoy the images in a  
memory card, external device, or internal  
memory on a large screen.  
xVarious modes  
The displayed image can be switched  
automatically as though you are turning the  
pages of an album yourself. You can select  
from various modes including just images,  
clock, and calendar view. You can also  
change playback settings such as the display  
order.  
12 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Checking included  
items  
Identifying the parts  
For details, see the pages indicated in the  
parentheses.  
Make sure that the following items are  
included.  
The illustrations are of the DPF-V900. The  
locations and names of buttons and connectors  
of the DPF-V700 are identical to those of the  
DPF-V900, although the LCD screen size is  
different.  
• Digital photo frame (1)  
• Remote control (1)  
• AC adaptor (1)  
• AC power cord (1)  
• Operating Instructions (this manual) (1)  
• Warranty (1)  
Front  
(In some regions, the warranty is not  
supplied.)  
A LCD screen  
B Remote sensor  
When using the supplied remote control, point  
it at this sensor.  
Continued  
13 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Rear  
A Connector for USB A/Bluetooth  
adaptor (.page 38)  
F VIEW MODE button  
G Access lamp (.page 20)  
H “Memory Stick PRO” (Standard/  
Duo) slot (.page 20)  
I CompactFlash card/Microdrive  
You can transfer images wirelessly from a  
BLUETOOTH™ compatible mobile phone or  
digital camera by connecting a Bluetooth  
adaptor (optional: DPPA-BT1).  
slot (.page 20)  
J 1 (on/standby) button/(standby)  
You can also connect a digital camera, USB  
memory, or photo storage compatible with  
USB mass storage.  
indicator  
K MENU button  
B
USB miniB connector  
(.page 40)  
Displays the menu.  
You can use the menu to operate same  
functions of buttons on remote control such as  
[Slideshow], [Rotate], [Add to album] and  
[Clock] from the menu.  
Connect a USB cable when you want to use  
the photo frame with a computer.  
C HDMI OUT (output) connector  
(.page 36)  
Connect an HDMI cable when you want to  
view images on a high definition TV.  
L Direction (v/V) buttons  
These buttons move the cursor.  
M
ENTER button  
D DC IN 8.4 V jack (.page 17)  
Insert the plug of the supplied AC adaptor to  
this jack, and connect the AC power cord to  
the AC adaptor and the wall outlet.  
N Reset switch  
O SD memory card/MMC/xD-Picture  
Card slot (.page 20)  
E Stand (.page 18)  
14 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
A VIEW MODE button  
B
C
(clock) button  
(slideshow) button  
D MENU button  
E BACK button  
F 1 (on/standby) button  
G
H
I
(add to album) button  
(zoom in)/ (zoom out) buttons  
(index) button  
This button switches from the image preview  
screen to index view screen.  
J Direction (B/b/v/V) buttons  
K
(enter) button  
L
(rotation) button (.page 28)  
15 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic operations  
Replacing the battery of the  
remote control  
If the remote control stops working, replace the  
battery (CR2025 lithium battery) with a new  
one.  
Preparing the remote  
control  
The supplied lithium battery (CR2025) has  
already been inserted into the remote control.  
Pull out the protective sheet before use as  
shown in the figure.  
1 Pull out the battery holder.  
While pressing in the tab of the battery  
holder, pull out the battery holder.  
Protective sheet  
Using the remote control  
Point the top end of the remote control towards  
the remote sensor on the photo frame.  
2 Remove the old battery from the  
battery holder and then insert a new  
battery.  
Insert the battery so that “+” is facing  
upwards.  
Remote  
sensor  
3 Reinsert the battery holder into the  
remote control.  
WARNING  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Notes  
• When the lithium battery becomes weak, the  
operating distance of the Remote conrol may  
shorten, or the Remote control may not function  
properly. In this case, replace the battery with a  
Sony CR2025 lithium battery. Use of another  
battery may present a risk of fire or explosion.  
16 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
• Using a battery other than the specified one may  
result in the battery rupturing.  
Connecting to the AC  
power source  
• Dispose of used batteries as specified by the local  
authorities.  
• Do not leave the remote control in a very hot and  
humid place.  
• Take care that no foreign objects enter inside the  
remote control when you, for example, replace the  
battery.  
1 Insert the plug of the AC adaptor  
into the DC IN 8.4 V jack on the rear  
of the photo frame.  
• Incorrect use of the battery may cause leaking and  
corrosion.  
2 Connect the AC power cord to the  
AC adaptor and the wall outlet.  
– Do not recharge the battery.  
– When the remote control will not be used for a  
long period of time, remove the battery from the  
remote control to prevent leaking and corrosion.  
– Incorrectly inserting, shorting, dismantling, or  
heating the battery, or throwing it into a fire  
may cause the battery to rupture and leak.  
About descriptions in this  
manual  
The operations described in this manual are  
based on remote control operation. When an  
operation is performed differently with the  
remote control and buttons on photo frame, it  
will be explained in a tip.  
Plug  
AC adaptor  
To wall outlet  
Notes  
• A socket outlet should be as close as possible to unit  
and easily accessible.  
• Do not place the photo frame in an unsteady  
location such as on an uneven table or tilted surface.  
• Connect the AC adaptor to an easily accessible wall  
outlet close by. If trouble occurs while using the  
adaptor, immediately shut off the power by  
disconnecting the plug from the wall outlet.  
• Do not short the plug of the AC adaptor with a  
metal object. Doing so may cause a malfunction.  
• Do not use the AC Adaptor placed in a narrow  
space, such as between a wall and furniture.  
• After use, remove the AC adaptor from the  
DC IN 8.4 V jack of the photo frame, and remove  
the AC power cord from the outlet.  
Continued  
17 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To use your photo frame abroad  
- Power sources  
Setting the stand  
You can use your photo frame and the AC  
Adaptor (supplied) in any country or region  
where the power supply is within 100 V to  
240 V AC, 50/60 Hz. Use a commercially  
available AC plug adaptor [a], if necessary,  
depending on the wall outlet (wall socket) [b].  
Opening the stand  
Set the photo frame with opening the stand as  
below.  
AC-L200  
Do not use an electronics transformer (travel  
converter), as this may cause a malfunction.  
Setting to portrait or landscape  
orientation  
You can set the photo frame to portrait or  
landscape orientation by rotating it without  
moving the stand.  
When the photo frame is placed in the portrait  
orientation, the image is also automatically  
rotated to its proper orientation.  
Notes  
• Close the stand when you carry the photo frame.  
• Check whether the stand is stable. If the stand is not  
set properly, the photo frame may fall over.  
• When the photo frame is rotated to the portrait  
orientation, the menu, image information and index  
display are not rotated.  
18 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Turning the photo frame Setting the clock  
on  
The clock of the photo frame needs to be  
adjusted in order to display an accurate time in  
the clock and calendar view modes.  
Turning on the power  
Press 1 (on/standby) on the photo frame or  
remote control to turn on the power, and the  
standby indicator turns into green from red.  
When you power on the first time after  
purchase, demo mode will automatically start.  
During demo mode, you cannot set up clock.  
Please insert memory card with valid picture  
data which will disable demo mode. After  
disabling demo mode, you can start clock  
setting.  
1 Press MENU on the remote control.  
The menu screen is displayed.  
2 Press v/V to select [Various  
settings] and then press  
to  
display the Various settings screen.  
3 Press  
v
/V to select [Date/time  
settings] and then press  
.
The Date/time settings screen is displayed.  
Note  
• The standby indicator lights red, when you connect  
the AC adaptor to the photo frame.  
Turning off the power  
Hold 1 (on/standby) on the photo frame or  
remote control until turning off the power. The  
standby indicator turns into red from green.  
4 Select the format of the date.  
1Press v/V to select [Date Display Order]  
Note  
• Do not disconnect the AC adaptor from the photo  
frame before the standby indicator turns into red.  
Doing so may damage the photo frame.  
and then press  
2Press v/V to select a format and then  
press  
.
.
• Y/M/D  
• M/D/Y  
• D/M/Y  
5
Adjust the date.  
1Press v/V to select [Date] and then  
press  
.
Continued  
19 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
2Press v/V to select a value and then  
press  
.
Inserting a memory card  
and viewing images  
6
Adjust the time.  
1Press v/V to select [Time] and then  
press  
2Press v/V to select a value and then  
press  
.
This section describes inserting a memory card  
and general operations for displaying images in  
a slideshow.  
.
Set the time in the order of hour,  
minute, and second.  
Inserting a memory card  
7 Set the day to start the week for the  
calendar.  
Insert a memory card firmly into the  
corresponding slot with its label side facing  
toward you (when taking your position on the  
rear side of the photo frame).  
You can set the day that appears on the  
very left when the calendar is displayed.  
1Press v/V to select [First Weekday] and  
then press  
2Press v/V to select [Sunday] or  
[Monday] and then press  
.
For details on the memory cards you can use  
with this photo frame, see pages 48 to 50.  
.
Access lamp  
8 Press MENU.  
The menu screen is closed.  
Insert a memory card firmly into the  
corresponding slot with its label side facing  
toward you. The slot order from the top is  
“Memory Stick” (“Memory Stick Duo”),  
CompactFlash card, SD memory card and xD-  
Picture Card.  
To remove a memory card  
Remove a memory card from a slot in the opposite  
direction from which it was inserted.  
20 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Notes  
• When inserting the memory card, it will only insert  
the portion of the way, so do not try to force it as  
this could damage the memory card and/or photo  
frame.  
• This photo frame has “Memory Stick” standard and  
Duo size compatible slot, so you do not need a  
Memory Stick adaptor.  
• The SD memory card/xD-Picture Card dual-  
purpose slot automatically detects the card type.  
• Before using a memory card, see “About the  
Display priority of images  
If a memory card is inserted or external device is  
connected, the images of the inserted memory card or  
connected device are displayed automatically. To  
manually change the memory card or external device  
to be displayed, specify it in the [Select device] menu  
The photo frame displays the images of the  
memory card in the following priorities.  
If a device is connected to the USB A connector  
of the photo frame, the images in the connected  
device always take priority and are displayed. To  
display the images in the memory card first,  
disconnect the device from the USB A connector or  
change the setting in the [Select device] menu.  
If multiple memory cards are inserted when the  
photo frame is turned on, the images of the first  
memory card you inserted take priority and are  
displayed.  
If multiple memory cards are inserted during the  
photo frame is turned off, the priority order for  
display is as follows.  
“Memory Stick” b CompactFlash card  
b SD memory card/xD-Picture Card  
If no memory card is inserted and no device is  
connected, the images saved to the album in the  
internal memory are displayed.  
Continued  
21 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Displaying images  
x Overview of display  
You can press the buttons on the remote control  
to switch the display.*  
Clock display  
Slideshow display  
(page 23)  
Single image display  
(page 24)  
Index image display  
Tips*  
• If the power is on and no memory card is inserted  
and no device is connected, the images in internal  
memory are displayed. If no images are saved to  
internal memory, demonstration mode starts  
automatically. Demonstration mode ends, if a  
memory card is inserted.  
• The display mode stays unchanged once you turn  
the photo frame off and on again.  
22 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Clock view mode  
x Slideshow display  
Images in a memory card are automatically  
Displays images with shooting date and time.  
displayed one after another.  
To start the slideshow  
• To start a slideshow from single image,  
clock, or index image display, press  
(slideshow).  
Tip  
To perform this operation from the photo frame, press  
ENTER on the single image display mode.  
Calendar view mode  
There are several slideshow modes. Pressing  
VIEW MODE changes the modes in the  
following order.  
Displays images one after another while  
showing a calendar.  
Tip  
You can set the interval on the single view and  
calendar view mode in the [Slideshow Settings] menu  
(page 34). On the single view mode, you can also set  
the effect and order in this menu.  
Single view mode  
Images are displayed in a single screen one  
after another with the effect selected in the  
[Slideshow Settings] menu.  
Random view mode  
Displays images while randomly switching  
between the above four slideshow patterns.  
Multiple image mode  
Displays multiple images at same time.  
Continued  
23 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Fit to screen mode  
x Single image display  
Displays an image over the whole screen.  
To display an image you want to display  
You can switch the images to display by  
pressing B/b.  
• During a slideshow, press  
you want to display.  
at an image  
• In the index image display, press B/b/v/V to  
select an image you want to display and then  
press  
. You can also press (zoom in).  
Tip  
To perform this operation from the photo frame, press  
ENTER at an image you want to display during a  
slideshow. In the index image display, press the  
direction buttons to select an image and then press  
ENTER.  
Image information mode  
Displays image information such as the image  
number, file name, and shooting date.  
Pressing VIEW MODE changes the modes in  
the following order.  
You can switch the images to display by  
pressing B/b.  
Tip  
You can set the image display mode except image  
information mode with [Display Mode] in the  
[Various settings] menu (page 34). Not all images are  
able to be [Fit to screen].  
Entire image mode  
Displays an entire image in the screen.  
You can switch the images to display by  
pressing B/b.  
The following information is displayed.  
• Input/setting indications  
Input indications and settings information  
for an image are displayed.  
Icons  
Meaning  
“Memory Stick” input  
SD Memory Card input  
CompactFlash input  
xD-Picture Card input  
External Device input  
Internal memory input  
Protect indication  
24 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
You can select an image by pressing B/b/v/V.  
Icons  
Meaning  
Associated file indication  
(Displayed when there is an  
associated file such as a motion  
file or a miniature e-mail image  
file.)  
• Image display order/Total number of images  
• Image number (folder-file number)  
This is displayed if the image is DCF  
compliant.  
Large thumbnail mode  
• Shooting date  
• Image details  
Displays a list of large thumbnails (3 rows × 4  
columns).  
– File format (JPEG, BMP, TIFF, RAW)  
– Number of pixels (width × height)  
– Manufacturer name of image input device  
– Model name of image input device  
– Shutter speed (e.g.: 1/8)  
You can select an image by pressing B/b/v/V.  
– Aperture value (e.g.: F2.8)  
– Exposure value (e.g.: +0.0EV)  
x Index image display  
The list of images in the selected memory card,  
internal memory or external device is  
displayed.  
Notes  
• In the index image display, images will not be  
automatically rotated when the photo frame is set to  
the portrait orientation.  
To show the index image display from a  
slideshow, clock, or single image  
display  
• During TV output, the number of images displayed  
on the screen varies depending on your TV’s screen  
size.  
Press  
(index). You can also press (zoom  
out) from the single image display.  
Tip  
x Clock display  
Displays a clock or calendar. No image is  
displayed.  
To perform this operation from the photo frame,  
select the index image display in the menu on the  
single image display.  
To display the clock display from  
slideshow, single image, or index image  
display  
Press VIEW MODE to switch the modes of the  
index image display.  
Press  
(clock) on the remote control.  
Small thumbnail mode  
Displays a list of small thumbnails (5 rows × 6  
columns).  
Tip  
To perform this operation from the photo frame,  
select the clock display in the menu on the single  
image display.  
Continued  
25 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Press VIEW MODE to switch the modes of the  
clock display.  
Analog clock mode  
Displays the time on analog clock.  
Digital clock mode  
Displays the date and time on digital clock.  
Calendar mode  
Displays a calendar for the current month. You  
can press v/V to display a calendar for the  
previous or next month. You can also set the  
first day of the week for the calendar in the  
[Date/time settings] menu.  
Tip  
There are black and white background types for each  
of analogue clock, digital clock and calendar mode.  
26 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Advanced operations  
4 Press v/V to select [Save] and then  
press  
.
AUTO TOUCH-UP  
The corrected image is saved as a new  
image.  
What is AUTO TOUCH-UP?  
To return to the original image  
(image before correction)  
AUTO TOUCH-UP is a feature for performing  
the following four corrections automatically at  
the same time. It is not possible to adjust the  
level for each of the corrections manually.  
Select [Cancel] and then press  
.
Tips  
Skin smoothing: Automatically recognizes face  
parts, and adjusts the skin tone for a smoother look.  
• The original image is the same as it was before  
correction.  
Backlight correction: Adjusts the brightness by  
using the face detect function.  
• The corrected image is saved in the same device as  
the image before correction.  
Focus correction: Improves the focus of an out-of-  
focus image to create a better-focused image.  
• To perform this operation from the photo frame,  
press MENU, press the direction buttons to select  
Red-eye correction: Automatically detects faces and  
corrects red-eye caused by the flash.  
the item, and then press  
ENTER.  
Notes  
1 Display the image you want to  
• Depending on the image, it may take a while for the  
correction.  
correct as single image display.  
• Depending on the image, the faces of people may  
not be able to be detected automatically.  
2 Press MENU.  
The menu is displayed.  
• Depending on the image, focus correction may not  
be able to be performed properly. Focus correction  
is not effective for blurring caused by shaking of the  
camera.  
• Depending on the image, red-eye correction may  
not be possible.  
The automatic red-eye correction of  
this photo frame uses the technology  
of FotoNation Inc. in the U.S.A.  
3 Press v/V to select [AUTO TOUCH-  
UP] and then press  
.
Correction of the selected image begins  
and then the image before correction  
appears on the left and the corrected  
image appears on the right.  
The skin smoothing correction of the photo frame  
uses the technology of Ichikawa Soft Laboratory.  
27 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Specifying the playback Adjusting the image size  
device  
and position  
You can specify the memory card or external  
device to be displayed.  
Enlarging an image  
1 To enlarge an image, press  
(zoom in) on the remote control. To  
reduce an enlarged image, press  
(zoom out).  
1 Press MENU.  
The menu is displayed.  
2 Press v/V to select [Select device]  
and then press  
.
Each press of the button enlarges the  
image further. You can enlarge an image  
to maximum 5 times the original scale.  
You can move an enlarged image up,  
down, left, and right.  
The screen for selecting a device is  
displayed.  
Notes  
• Enlarging an image may reduce the quality  
depending on the image size.  
• It is not possible to enlarge an image with buttons  
on the photo frame.  
Rotating an image  
Tip  
Insert the device at this procedure if no device is  
inserted.  
1 Press  
(rotation) on the remote  
control.  
3 Press v/V to select the device you  
Each press of the button rotates the image  
90 degrees counter-clockwise.  
want to display and then press  
The images of the selected device are  
displayed.  
.
To perform the operation from  
the menu of the remote control  
Tip  
To perform this operation from the photo frame, press  
MENU, press the direction buttons to select the  
device you want to display, and then press  
ENTER.  
1 Press MENU.  
The menu is displayed.  
28 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
2 Press v/V to select [Rotate] and  
then press  
.
Adding to the internal  
memory  
The Rotate menu is displayed.  
You can use the photo frame as the digital  
album with saving important images in the  
internal memory.  
Tip  
In [Image file size] of the menu, you can preset  
whether to optimize the size of images or save images  
as is without compressing them when you save them  
to the internal memory.  
3 Press v/V to select the direction to  
rotate and then press  
.
:
Rotates the image 90 degrees  
clockwise.  
1 Press  
(add to album) on the  
remote control.  
:
The Add to album menu is displayed.  
Rotates the image 90 degrees counter-  
clockwise.  
Single image display  
4 Press v/V to select [OK] and then  
press  
.
Tip  
To perform this operation from the photo frame, press  
MENU, press the direction buttons to select the item,  
and then press  
ENTER.  
Slideshow display  
Continued  
29 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Index image display  
To cancel the selection, select images to  
cancel and then press  
check mark.  
2Press MENU.  
The confirmation screen whether to  
save or not to the internal memory is  
displayed.  
to delete  
Tips  
To perform this operation from the menu,  
press MENU on remote control, press v/V  
to select [Add to album], and then press  
.
Images in the internal memory cannot be  
added to the album.  
4 Press v/V to select [Yes] and then  
press  
.
2 Press v/V to select [This image],  
The image is saved to the internal  
memory.  
[Selected images] or [All images]  
and then press  
.
[This image]: Adds the image currently  
displayed*.  
[Selected images]: Adds the selected  
images from the index display.  
[All images]: Adds all images in the  
device displayed.  
[Selected images] shows the images in the  
device which are currently displayed as  
index view.  
If you select [This image] or [All images],  
go to step 4 to complete adding the image  
to the internal memory.  
* You cannot select [This image] on the  
slideshow display.  
3 If you selected [Selected images],  
choose the image you want to add.  
1Press B/b/v/V to select the image to  
add to the album and then press  
Check mark will be placed on each  
selected image.  
.
Repeat this operation to add multiple  
images at the same time.  
30 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Repeat this operation to export multiple  
images at the same time.  
To cancel the selection, select images to  
Exporting an image  
cancel and then press  
check mark.  
2Press MENU.  
to delete  
You can export the images of the internal  
memory to a memory card or external device.  
The screen for selecting the device to  
which to export is displayed.  
1 Press MENU.  
The menu is displayed.  
5 Press v/V to select the device to  
2 Press v/V to select [Export] and  
which to export the image and then  
then press  
.
press  
.
The Export menu is displayed.  
6 The confirmation screen is  
3 Press v/V to select [This image],  
displayed after exporting is finished,  
[Selected images] or [All images]  
and then press  
.
and then press  
.
The image is copied to the specified  
[This image]: Exports the image currently  
displayed or the image chosen at the index  
view.*  
device.  
Note  
[Selected images]: Exports the selected  
image from the index display.  
Do not turn off the power or remove the memory card  
or disconnect the external device during exporting.  
Doing so may damage the photo frame or memory  
card, or damage the data.  
[All images]: Exports all images in the  
album.  
Selecting [Selected images] shows the  
index display of images in the album.  
Tip  
To perform this operation from the photo frame, press  
MENU, press the direction buttons to select the item,  
and then press  
If you select [This image] or [All images],  
go to step 5 to select the device to which  
you want to export.  
ENTER.  
* You cannot select [This image] on the  
slideshow display.  
4 If you selected [Selected images],  
specify the image to export.  
1Press B/b/v/V to select the image you  
want to export and then press  
.
Check mark will be placed on each  
selected image.  
31 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Format of internal memory  
Deleting an image  
When you use [Format internal memory] in  
[Various settings] menu, you can format the  
internal memory.  
1 Press MENU.  
The menu is displayed.  
2 Press v/V to select [Delete] and  
then press  
.
The Delete menu is displayed.  
3 Press v/V to select [This image],  
[Selected images] or [All images]  
and then press  
.
[This image]: Deletes the image currently  
displayed.  
[Selected images]: Deletes the selected  
image from the image list.  
[All images]: Deletes all images in the  
device displayed.  
[Selected images] shows the images in the  
device which are currently displayed as  
index view.  
If you select [This image] or [All images],  
go to step 5 to confirm the operation.  
4 If you selected [Selected images],  
specify the image to delete.  
1Press B/b/v/V to select the image to  
delete and then press  
. Check mark  
will be placed on each selected image.  
Repeat this operation to delete multiple  
images at the same time.  
To cancel the selection, select images to  
cancel and then press  
check mark.  
to delete  
2Press MENU.  
The delete confirmation screen is  
displayed.  
5 Press v/V to select [Yes] and then  
press  
.
The image is deleted.  
Tip  
To perform this operation from the photo frame, press  
MENU, press the direction buttons to select the item,  
and then press  
ENTER.  
32 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4 Press v/V to select the item you  
want to change and then press  
.
Changing the various  
settings  
This enables you to set each of the items  
Note  
Setting procedure  
When the photo frame is, for instance,  
displaying a slideshow, some items are  
unavailable for changing the settings. They are  
displayed in gray and cannot be selected.  
You can change display, slideshow, brightness,  
language, and other settings of the photo frame.  
It is also possible to reset the settings to their  
factory defaults and format the intenal memory.  
5 Press v/V to select a setting value  
and then press  
.
Each time you press v/V (v/V from the  
photo frame), the setting value changes. In  
the case of a numerical value, press V to  
increase the value and press v to decrease  
the value.  
Note  
Only internal memory can be formatted.  
1 Press MENU.  
The menu is displayed.  
If you press  
, the setting is confirmed.  
2 Press v/V to select [Various  
6 Press MENU.  
The menu closes.  
settings] and then press  
to  
display the Various settings screen.  
Tips  
• To perform this operation from the photo frame,  
press MENU, press the direction buttons to select  
the item, and then press  
• To reset the settings to their factory defaults, select  
[Reset] and then press . Adjusted values except  
clock setting are reset to default settings.  
ENTER.  
3 Press v/V to select the item you  
want to change and then press  
.
The setting screen of the selected item is  
displayed.  
For example, when [Slideshow Settings]  
is selected.  
Continued  
33 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Items to set  
*: Factory default settings  
Item  
Setting  
Description  
Slideshow  
Settings  
Interval  
Set a value from 3 sec., 10 sec.*, 30 sec., 1 min., 5 min., 30 min., 1 hour, 3  
hours, 12 hours, 24hours for the interval between images when the pattern  
is single view or calendar view.  
Effect  
Center cross  
Transitions to the next image as though the previous  
image is being pushed from the center to the four  
corners.  
Vert. blinds  
Horiz. blinds  
Fade*  
Transitions to the next image as though blinds are  
being lowered vertically.  
Transitions to the next image as though blinds are  
being pulled horizontally.  
Transitions to the next image by fading out the current  
image and fading in the next image.  
Wipe  
Transitions to the next image as though the current  
image is being wiped off the screen to reveal the next  
image.  
Random  
Uses the above five effects randomly.  
Order  
Shoot. Date*  
Displays images in the order of shooting date.  
Note  
When the number of images exceeds 1,500, the images  
cannot be displayed by date. The images are listed in  
the order of their file names.  
Random  
Displays images randomly.  
Screen Settings LCD backlight  
Brightness  
Allows you to set the brightness of the backlight of the LCD screen to a  
level from 1 to 10*.  
Allows you to set the luminance of images to a level from 1, 2*, 3.  
Note  
This function is not available when an image is displayed on TV with  
HDMI connection.  
Display Mode  
You can select the view mode for the single image display.  
Note  
The original image data will not change.  
Entire image*  
Displays an image in the original horizontal to vertical  
ratio with margins on the top, bottom, left and right.  
Fit to screen  
Zooms in at the center of the image enough to fill the  
whole screen.  
Auto image  
orientation  
ON*/OFF: You can set the photo frame to automatically detect and rotate  
the orientation of images.  
34 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Item  
Setting  
Description  
Screen Settings Auto display  
orientation  
ON*/OFF: When the photo frame is in portrait orientation, you can set it  
to automatically detect and rotate the images to their proper orientation.  
General  
Settings  
Auto power  
ON/OFF  
Power-ON  
timer  
You can set the timer (hour/minute) for the power to  
turn on automatically. Select [ON] to set [Auto ON  
time].  
Power-OFF  
timer  
You can set the timer (hour/minute) for the power to  
turn off automatically. Select [ON] to set [Auto OFF  
time].  
Image file size  
Album*  
Compresses images and saves them to the internal  
memory. You can save more images, but a  
deterioration in image quality compared to the original  
images is noticeable when the images are displayed on  
a large monitor via the HDMI OUT connector.  
Original  
Saves images to the internal memory without  
compressing them. There is no deterioration, but you  
can save fewer images.  
Control for  
HDMI  
ON*/OFF: Sets whether to enable or disable the HDMI control functions  
such as switching the TV’s input automatically to its video mode so that  
the images are displayed, and operating the photo frame with the TV’s  
remote control.  
Sony logo  
ON*/OFF: You can set whether the photo frame’s Sony logo lights or not.  
Date/time  
settings  
Sets the date, time, first day of a week, etc. (.page 19)  
Language  
setting  
Sets the display language on the LCD screen.  
Japanese, English*, French, Spanish, German, Italian, Russian, Chinese (Simplified),  
Chinese (Traditional), Dutch  
Note  
Default language setting may vary in some regions.  
Reset  
Returns all settings to their factory defaults except for date/time setting.  
Format internal You can format the internal memory.  
memory  
Notes  
• All the images added to the internal memory will be deleted.  
• Do not format the internal memory by using connection to PC or other external devices.  
System  
Version  
Displays the version of the firmware of the photo frame.  
Information  
Internal  
memory  
Memory  
capacity  
Indicates the maximum amount of space available in  
internal memory in the initial state.  
Remaining  
capacity  
Indicates the amount of free space currently available  
in internal memory.  
35 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                   
Connecting to a high  
definition TV to view  
images  
Connecting to a high  
definition TV  
The photo frame is capable of HDMI output. If  
you connect the photo frame to a TV with an  
HDMI input, you can display images in higher  
definition on the TV.  
High definition TV  
To HDMI input  
connector  
About “PhotoTV HD”  
The photo frame supports “PhotoTV HD”.  
“PhotoTV HD” is a function for expressing  
subtle textures and color tones in high  
definition, giving the appearance of real  
photos. You can combine Sony devices that  
support “PhotoTV HD” together to enjoy  
photos at beautiful full HD quality. You can  
enjoy beautiful photo quality such as the subtle  
portrayal of skin or a flower petal and the  
textures of sand and waves on a large screen.  
4 Press 1 (on/standby) on the photo  
frame to turn on the power.  
5 Change the input of the TV.  
If the connected TV is compatible with  
HDMI control, the TV turns on  
automatically when you turn on the photo  
frame. Also, the input of the TV is  
changed automatically and images from  
the photo frame are displayed.  
Note  
Depending on the original images, high-definition  
display may not be possible.  
Notes  
Operation is not guaranteed with all TVs.  
If you connect a TV, the LCD screen of the  
photo frame turns off.  
1 Connect the photo frame to the AC  
power source. (.page 17)  
If [Control for HDMI] is set to off in the  
TV settings, the input is not changed  
automatically. The setting method differs  
depending on the TV. Refer to the  
operating instructions supplied with the  
TV.  
2 Prepare a commercially available  
HDMI cable.  
Notes  
Use an HDMI cable that is less than 3  
meters long.  
If you are using a TV that does not support  
control for HDMI or the input is not  
switched automatically, change the TV’s  
input manually.  
Use an HDMI cable with the HDMI logo.  
3 Connect the HDMI OUT connector  
(A type connector) of the photo  
frame and the HDMI input connector  
of the TV.  
The method of changing the input differs  
depending on the TV. Refer to the  
operating instructions supplied with the  
TV.  
36 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
on the photo frame, or by connecting the  
powered-on photo frame to the television. If  
a television is on the standby mode, the  
television is also turned on.  
• You can perform the photo frame operations  
using the TV remote control unit.  
Using the television remote  
control for photo frame  
If your television supports the control for  
HDMI, you can use the remote control of your  
television to operate the photo frame.  
• If you switch the language of the TV while  
the photo frame and the television is being  
connected, you can also change the photo  
frame language automatically.  
Notes  
• We cannot guarantee operations with all types of  
televisions.  
• When a remote control of your Sony TV is  
equipped with a link menu button, you can use the  
remote control to operate the photo frame.  
Otherwise, you cannot use a TV remote control to  
operate the photo frame.  
Note  
To enable above functions, your television must  
support each function.  
• To operate the photo frame, the %5$4, [Enter],  
[Return] buttons support the HDMI control.  
What is “BRAVIA Sync”  
• If the HDMI control setting of your television is off,  
the television input does not switch automatically.  
Settings differ depending on the television you use.  
For details, see the manual supplied with your  
television.  
The “BRAVIA Sync” is a name of a feature of  
Sony products that uses the HDMI control  
signals and enables you to control linked  
operations of a “BRAVIA Sync”-ready product  
from a BRAVIA control unit.  
• If [Control for HDMI] is set to [OFF], the input will  
not switch automatically (page 35).  
By connecting the photo frame and a  
“BRAVIA Sync”-compatible TV with an  
HDMI cable, you can use a BRAVIA control  
unit to perform linked operations.  
x Basic operations of the photo frame  
with a TV remote control  
• Press %5$4 on the TV remote control  
to select the images on the single image  
display.  
• Press [Enter] button on the TV remote  
control to switch the single image display  
and the slideshow display.  
Note  
With the TV remote control, you cannot do the  
following operation:  
• Changing the VIEW MODE.  
• Setting the MENU function.  
• Zooming in/Zooming out  
On control for HDMI  
When the [Control for HDMI] is set to [ON],  
you can use the following operations:  
• Turning off the photo frame power together  
with the television.  
• After the photo frame is connected to the  
TV, you can switch the TV input  
automatically to the photo frame by turning  
37 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using an external device  
Using a Bluetooth  
device  
Transferring images  
from an external device  
You can connect a Bluetooth adaptor (optional)  
to the USB A connector of the photo frame and  
transfer images from a Bluetooth compatible  
mobile phone or other device. The transferred  
images are saved to internal memory.  
You can connect a digital camera, USB  
memory, or photo storage with support for  
mass storage to the photo frame and transfer  
images.  
Notes  
• Compatibility with all external devices is not  
guaranteed.  
1 Connect the photo frame to the AC  
power source. (.page 17)  
If an external device is connected to the USB A  
connector on the photo frame, the photo frame  
cannot read the images in card media. Disconnect  
an external device, if you need.  
2 Press 1 (on/standby) on the photo  
frame to turn on the power.  
3 Connect the Bluetooth adaptor  
(optional) to the USB A connector.  
1 Connect the photo frame to the AC  
power source. (.page 17)  
4 Transfer the images to the photo  
frame by performing operations from  
the mobile phone.  
2 Set the digital camera or external  
device to mass storage connection  
mode.  
The setting and operation method before  
connecting differ depending on the digital  
camera or external device. Refer to the  
operating instructions supplied with the  
digital camera or external device. (If you  
are using a Cyber-shot, set “USB  
Connect” to [Normal] or [Mass Storage].)  
3 Press 1 (on/standby) on the photo  
frame to turn on the power.  
4 Connect the digital camera or  
external device to the USB A  
connector.  
Bluetooth  
compatible mobile  
phone  
Use the USB cable supplied with the  
digital camera or external device to  
connect to the photo frame.  
38 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Connecting to a  
computer  
You can connect to a computer to view and  
copy images of the internal memory of the  
photo frame to the computer, and copy images  
of the computer to the photo frame.  
System requirements  
External  
To connect a computer to use the picture frame,  
your computer must satisfy the following  
recommended system requirements.  
memory or  
other external  
device  
x Windows  
Recommended OS: Microsoft Windows Vista,  
Windows XP Service Pack 2 or Windows 2000  
Professional Service Pack 4  
Notes  
When using a commercially available USB cable,  
use an A-Type USB cable that is less than 3 meters  
long.  
(pre-installed at the time of shipment from the  
factory)  
Port: USB port  
Do not disconnect the USB cable or turn the photo  
frame and external device off while the access  
lamp on the external device is flashing. Doing so  
may damage the data in the external device. Sony  
assumes no responsibility for any damage or loss  
of data.  
x Macintosh  
Recommended OS: Mac OS X (10.4) or later  
(pre-installed at the time of shipment from the  
factory)  
A USB hub or USB device with a built-in USB hub  
may not work properly.  
Port: USB port  
The photo frame cannot use data that has been  
encrypted or compressed using, for instance,  
fingerprint authentication or a password.  
Notes  
If multiple USB devices are connected to a  
computer or if a hub is used, a problem may occur.  
In such a case, simplify the connections.  
You cannot operate the photo frame from another  
USB device being used simultaneously.  
Do not disconnect the USB cable during data  
communication.  
Operation with all computers that satisfy the  
recommended system requirements is not  
guaranteed.  
The photo frame has been demonstrated as  
operable with connecting to PC or Sony digital  
photo printer. When other devices are connected to  
the photo frame, these devices may not recognize  
the internal memory of the photo frame.  
Continued  
39 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Connecting to a computer to  
exchange images  
Note  
When images of the computer are saved to the  
internal memory of the photo frame, the image files  
are saved without being compressed. As a result,  
fewer images may be able to be saved to the internal  
memory of the photo frame.  
1 Connect the photo frame to the AC  
power source. (.page 17)  
2 Connect the computer and photo  
frame with a commercially available  
USB cable (optional: VMC-  
14UMB2)*.  
To USB miniB  
connector  
Computer  
To USB connector  
* This cable may not be available in all  
countries.  
Note  
Use a mini B-Type USB cable that is less than 3  
meters long.  
3 Press 1 (on/standby) on the photo  
frame to turn on the power.  
4 Exchange images with the internal  
memory of the photo frame by  
performing operations from the  
computer.  
40 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Error messages  
If an error message appears  
If an error occurs, one of the following error messages may be displayed on the LCD screen of the  
photo frame. Follow the corresponding solution below to solve the problem.  
Error message  
Meaning/Solutions  
No Memory Stick. / No  
• A memory card is not inserted in a slot. Or, an external  
device is not connected to the A-Type USB connector.  
Insert a memory card in the corresponding slot. Or, connect  
an external device. (.pages 20, 38)  
CompactFlash card. / No SD  
Memory Card. / No xD-Picture  
Card. / No External Device.  
An incompatible Memory Stick is • An unsupported memory card is inserted. An unsupported  
inserted. / An incompatible  
CompactFlash card is inserted. / An  
incompatible SD Memory Card is  
inserted. / An incompatible xD-  
Picture Card is inserted. / An  
incompatible External Device is  
inserted.  
external device is connected to the A-Type USB connector.  
Use a memory card or external device that is supported by  
the photo frame.  
No images on file.  
• There are no image files in the memory card or external  
device. Use a memory card or external device containing  
image files that can be displayed with the photo frame.  
Cannot delete a protected image.  
• To delete a protected file, cancel the protection on your  
digital camera.  
Media is protected. Remove  
protection then try again.  
• The memory card is write-protected. Slide the write-  
protect switch to the enable position. (.page 49)  
The Memory Stick is full. / The  
CompactFlash card is full. / The SD  
Memory Card is full. / The xD-  
Picture Card is full. / The External  
Device is full.  
• No more data can be saved because the memory card or  
external device is full. Delete images, or use a memory  
card or external device with free space.  
Error reading the Memory Stick. / • An error has occurred. If this error message is displayed  
Error reading the CompactFlash  
card. / Error reading the SD  
Memory Card. / Error reading the  
xD-Picture Card. / Error reading  
the External Device.  
frequently, check the status of the memory card or external  
device with a device other than the photo frame.  
• In the case of an external device:  
The external device may be write-protected. Cancel the  
write-protection setting for the device you are using. The  
internal memory of a digital camera may be write-  
protected.  
Write error in the Memory Stick. /  
Write error in the CompactFlash  
card. / Write error in the SD  
Memory Card. / Write error in the  
xD-Picture Card. / Write error in  
the External Device.  
The Memory Stick is read only.  
• A “Memory Stick-ROM” is inserted. To save the images,  
use the “Memory Stick” recommended (.page 48).  
Continued  
41 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Error message  
Meaning/Solutions  
The Memory Stick is protected.  
• A protected “Memory Stick” is inserted. To edit and save  
the images, use an external device to remove protection.  
Media format not supported.  
Cannot open the image.  
• The images cannot be displayed, if the image file is not  
supported by the photo frame.  
No more USB hubs can be  
connected.  
• Connect the device directly to the photo frame, or use a  
device without a built-in USB hub.  
Incompatible USB device. Check  
device’s USB settings.  
• Connect the device with support for mass storage. If USB  
setting of your device is incorrect, set the mass storage  
mode in USB setting.  
42 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If trouble occurs  
Before submitting the photo frame for repair, try using the following guidance to solve the problem.  
If the problem persists, consult with your Sony dealer or Sony service facilities.  
Power supply  
Symptom  
The power cannot • Is the power plug inserted  
be turned on.  
Check item  
Cause/Solutions  
c Insert the power plug properly.  
properly?  
Displaying images  
If the power is turned on but images are not displayed or the settings of the operation screen cannot  
be configured, confirm the following check items.  
Symptom  
Check item  
Cause/Solutions  
No images are  
displayed on the  
screen.  
• Is a memory card inserted or c Insert a memory card or connect an  
an external device connected  
properly?  
external device properly. (.pages 20,  
• Does the memory card  
contain images saved with a  
digital camera or other  
device?  
• Are images stored on the  
external device?  
c Insert a memory card containing images  
or connect an external device containing  
images.  
c Check the file formats that can be  
displayed. (.page 51)  
• Is the file format compatible c A file that is not compatible with DCF  
with the DCF?  
may not be able to be displayed with the  
photo frame, even if it can be displayed  
with a computer.  
Continued  
43 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Symptom  
Check item  
Cause/Solutions  
Some images are  
not displayed.  
• Are the images displayed in c If the image is displayed in the index view  
the index view?  
but cannot be displayed as single image,  
the image file may be damaged even  
though its thumbnail preview data is fine.  
c A file that is not compatible with DCF  
may not be able to be displayed with the  
photo frame, even if it can be displayed  
with a computer.  
• Does the mark displayed  
below appear in the index  
view?  
c If the mark shown on the left is displayed,  
the image file may not be supported by the  
photo frame because, for example, it is a  
JPEG file that was created with your  
computer. Also, the image file may be  
supported, but not contain the thumbnail  
data. Select the mark and press  
to  
• Were the images created  
with an application on a  
computer?  
change the screen to the single image  
display. If the mark on the left is displayed  
again, the image cannot be displayed  
because the image file is not supported by  
the photo frame.  
• Does the mark displayed  
below appear in the index  
view?  
c If the mark shown on the left is displayed,  
the image file is supported by the photo  
frame, but the thumbnail data or image  
itself cannot be opened. Select the mark  
and press  
. If the mark shown on the  
left is displayed again, the image cannot  
be displayed.  
• Are there more than 9,999  
images in the memory card  
or external device?  
c The photo frame can play, save, delete, or  
otherwise handle up to 9,999 image files.  
• Did you rename the file with c If you named or renamed the file on your  
a computer or other device?  
computer and the file name includes  
characters other than alphanumeric  
characters, the image may not be able to  
be displayed on the photo frame.  
• Are there eight or more  
levels in the folder hierarchy  
of the memory card or  
external device?  
c The photo frame cannot display images  
saved in a folder that is more over eight  
levels deep.  
44 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Check item  
Cause/Solutions  
The file name is  
not displayed  
properly.  
• Did you rename the file with c If you named or renamed the file on your  
a computer or other device?  
computer and the file name includes  
characters other than alphanumeric  
characters, the file name may not be able  
to be displayed properly on the photo  
frame. Also, for a file created on a  
computer or other device, a maximum of  
eight characters from the beginning of the  
file name can be displayed.  
Note  
Only alphanumeric characters can be displayed.  
Blank areas appear • Is the image extremely high c If an image is extremely high or wide,  
at the top and  
or wide?  
blank areas may appear because of the  
bottom.  
ratio between the height and width.  
Saving and deleting images  
Symptom  
Check item  
Cause/Solutions  
Cannot save an  
image.  
• Is the memory card write-  
protected?  
c Cancel write-protection and try saving  
again.  
• Is the write-protect switch of c Slide the write-protect switch to the  
the memory card in the  
enable position. (.page 49)  
[LOCK] position?  
• Is the memory card full?  
c Replace the memory card with one with  
sufficient free space. Or, delete any  
unnecessary images. (.page 32)  
• Is the internal memory full? c Delete any unnecessary images.  
(.page 32)  
Cannot delete an  
image.  
• Is the memory card write-  
protected?  
c Use the device you are using to cancel  
write-protection and try deleting again.  
• Is the write-protect switch of c Slide the write-protect switch to the  
the memory card in the  
enable position. (.page 49)  
[LOCK] position?  
• Are you using “Memory  
Stick-ROM”?  
c It is not possible to delete an image from  
or format “Memory Stick-ROM”.  
An image was  
deleted  
c An image cannot be recovered once it is  
deleted.  
accidentally.  
Continued  
45 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a digital camera or other external device  
Symptom  
Check item  
Cause/Solutions  
The camera is  
connected but  
nothing is  
• Is the cable connected  
properly?  
c Connect the cable properly.  
• Is the photo frame turned  
on?  
c Turn the photo frame on.  
displayed.  
Nothing happens  
even if the USB  
cable is  
disconnected and  
then connected.  
c An over current error may have occurred  
with the photo frame. To recover from the  
error, turn the power of the photo frame  
off and then back on.  
Images are not  
displayed on the  
TV screen or LCD  
screen.  
• The input of the TV is set to c Even if the input of the TV is not set to the  
the external input.  
photo frame, images may sometimes not  
be displayed on the TV screen or LCD  
screen if an HDMI cable is connected.  
c Change the input of the TV to the photo  
frame, or disconnect the HDMI cable and  
switch the display to the LCD screen.  
Photo frame  
Symptom  
Check item  
Cause/Solutions  
Nothing happens  
even if you operate  
the photo frame.  
c Push reset switch on rear side of the photo  
frame by thin object such as a pin, etc.  
46 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional information  
Precautions  
while connected to the wall outlet via the AC  
adaptor.  
• Be sure to use the AC adaptor supplied with  
the photo frame. Do not use other AC  
adaptors, as this may cause a malfunction.  
• Do not use the supplied AC adaptor for other  
devices.  
• Do not use an electrical transformer (travel  
converter), as this may cause overheating or  
a malfunction.  
On safety  
• Be careful not to set or drop any heavy  
objects on the power cord, or to damage the  
power cord in any way. Never operate this  
photo frame with a damaged power cord.  
• Should any solid object or liquid fall into the  
cabinet, unplug the photo frame and have it  
checked by qualified personnel before  
operating it any further.  
• In case the cord of the AC adaptor is  
damaged, do not use it any longer, as this  
may be dangerous.  
On moisture condensation  
• Never disassemble the photo frame.  
• To disconnect the power cord, pull it out by  
the plug. Never pull the power cord itself.  
• When the photo frame is not going to be  
used for an extended period of time,  
disconnect the power cord from the wall  
outlet.  
• Do not handle the photo frame roughly.  
• To reduce the risk of electrical shock, always  
unplug the photo frame from the electrical  
outlet before cleaning and servicing the  
photo frame.  
If the photo frame is brought directly from a  
cold location to a warm location or placed in an  
extremely warm or humid room, moisture may  
condense inside the unit. In such cases the  
photo frame will probably not work properly  
and may even develop a fault if you persist in  
using it. If moisture condensation occurs,  
unplug the AC power cord of the photo frame  
and do not use the photo frame for at least one  
hour.  
On transport  
When you transport the photo frame, remove  
the memory card, external devices, AC adaptor  
and connected cables from the photo frame and  
put the photo frame and its peripherals in the  
original box with the protective packaging.  
On installation  
• Avoid placing the photo frame in a location  
subject to:  
– vibration  
– humidity  
– excessive dust  
– direct sunlight  
– extremely high or low temperatures  
• Do not use electrical equipment near the  
photo frame. The photo frame will not work  
properly in electromagnetic fields.  
• Do not place heavy objects on the photo  
frame.  
If you no longer have the original box and  
packing parts, use similar packing material so  
that the photo frame will not be damaged while  
being transported.  
On cleaning  
Clean the photo frame with a soft dry cloth, or a  
soft cloth lightly moistened with a mild  
detergent solution. Do not use any type of  
solvent, such as alcohol or benzine, which may  
damage the finish.  
On the AC adaptor  
• Even if your photo frame is turned off, AC  
power (house current) is still supplied to it  
Continued  
47 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
On restrictions on duplication  
About the memory cards  
TV programs, films, video tapes, portraits of  
other people or other materials may be  
copyrighted. Unauthorized use of such  
materials may infringe the provisions of the  
copyright law.  
“Memory Stick”  
Types of “Memory Stick” that  
the photo frame can use  
With the photo frame, you can use the  
following types of “Memory Stick”*1:  
Type of “Memory Displaying  
Stick”  
Deleting/  
Saving  
“Memory Stick”*2  
(Not compatible  
with  
OK  
OK  
“MagicGate”)  
“Memory Stick”*2  
(Compatible with  
“MagicGate”)  
OK*5  
OK*5  
“MagicGate  
OK*5  
OK*5  
OK*5  
OK*5  
Memory Stick”*2  
“Memory Stick  
PRO”*2  
“Memory Stick  
PRO-HG”*2  
OK*5*6  
OK*5  
OK*5*6  
OK*5  
“Memory Stick  
Micro”*3 (“M2”*4)  
*1  
The photo frame supports FAT32. The photo  
frame has been demonstrated as operable with a  
“Memory Stick” with a capacity of 8GB or less  
manufactured by Sony Corporation. However, we  
do not guarantee the operations of all the “Memory  
Stick” media.  
*2  
The photo frame is equipped with a slot compatible  
with both standard-size and Duo-size media.  
Without a “Memory Stick Duo” adaptor, you can  
use both a standard-size “Memory Stick” and the  
compact-size “Memory Stick Duo”.  
*3  
*4  
When using a “Memory Stick Micro” with the  
photo frame, always insert it into an M2 adaptor.  
“M2” is an abbreviation for “Memory Stick  
Micro”. In this section, “M2” is used to describe  
“Memory Stick Micro”.  
*5  
Data reading/recording that requires “MagicGate”  
copyright protection cannot be performed.  
“MagicGate” is the general name of a copyright  
48 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
protection technology developed by Sony using  
authentication and encryption.  
• You cannot record, edit or delete data if you  
slide the write-protect switch to LOCK.  
*6  
The photo frame does not support 8 bit parallel  
data transfer.  
Write-protect switch  
Write  
enable  
position  
Write  
protect  
position  
Notes on use  
• For the latest information on the “Memory  
Stick” types that the photo frame supports,  
see the “Memory Stick” compatibility  
information on the Sony web site:  
support.html  
LOCK  
LOCK  
Place the label here.  
(Select the area where you use your photo  
frame, and then select “Digital Photo Frame”  
from each area page.)  
• Do not insert more than one “Memory Stick”  
at the same time, which may cause trouble  
with the photo frame.  
• If you use a “Memory Stick Micro” with the  
photo frame, “Memory Stick Micro” needs  
to be inserted into an “M2” adaptor.  
• If you insert a “Memory Stick Micro” into  
the photo frame without an “M2” adaptor,  
you may be unable to remove the “Memory  
Stick Micro”.  
• Do not attach any other material than the  
supplied label on the labelling position.  
When you attach the supplied label, be sure  
to attach it to the labelling position. Be  
careful that the label does not stick out.  
SD memory card  
The SD memory card slot of the photo frame  
allows you to use the following:  
• SD memory card*1  
• If you insert a “Memory Stick Micro” into an  
“M2”adaptor, and insert the “M2” adaptor  
into a “Memory Stick Duo” adaptor, the  
photo frame may not operate properly.  
• When you format a “Memory Stick”, use the  
format function of your digital camera. If  
you format a “Memory Stick” with your  
computer, images may not be displayed  
properly.  
• When you format a “Memory Stick”, all the  
data including protected image files will be  
erased. To avoid erasing important data by  
accident, make sure to check the contents of  
the “Memory Stick” before formatting.  
• miniSD card, microSD card  
(An adaptor is necessary.)*2  
• SDHC memory card*3  
• MMC standard memory card*4  
We do not guarantee proper operations for all  
types of SD memory cards and MMC standard  
memory cards.  
*1  
The photo frame has been demonstrated as  
operable with an SD memory card with a capacity  
of 2 GB or smaller.  
*2  
Some commercially available card adaptors have  
projected terminals on the rear. This type of  
adaptor may not work properly with the photo  
frame.  
*3  
The photo frame has been demonstrated as  
operable with an SDHC memory card with a  
capacity of 8 GB or less.  
*4  
The photo frame has been demonstrated as  
operable with an MMC standard memory card with  
a capacity of 2 GB or less.  
Continued  
49 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Notes on use  
Data reading/recording that requires copyright  
protection cannot be performed.  
Notes on using a memory card  
• When using a card, make sure to check the  
correct insertion direction of the card and the  
correct insertion slot.  
xD-Picture Card  
• When inserting the memory card, it will only  
insert the portion of the way, so do not try to  
force it as this could damage the memory  
card and/or photo frame.  
• Do not remove a card or turn off the photo  
frame while the photo frame is reading or  
writing data, or the access indicator is  
flashing. Otherwise, data may be rendered  
unreadable or erased.  
With the xD-Picture Card slot of the photo  
frame, you can use an xD-Picture Card*5. Not  
all the memory card operations are supported  
and we do not guarantee proper operations for  
all types of xD-Picture Card.  
*5  
The photo frame has been demonstrated as  
operable with an xD-Picture Card with a  
capacity of 2 GB or less.  
• We recommend that you save a backup of  
important data.  
CompactFlash card  
• Data processed with the computer may not  
be displayed with the photo frame.  
• When you carry or store a card, put it in the  
case supplied with it.  
• Do not touch the terminal of a card with your  
hand or a metal object.  
• Do not strike, bends or drop a card.  
• Do not disassemble or modify a card.  
• Do not expose a card to water.  
• Do not use or store a card under the  
following conditions:  
– Locations beyond the required operational  
conditions including locations such as the  
hot interior of a car parked in the sun and/  
or in the summer, the outdoors exposed to  
direct sunlight, or a place near a heater.  
– Humid locations or locations with  
corrosive substances present  
The CompactFlash card slot of the photo frame  
allows you to use the following:  
• CompactFlash Memory Card (Type I/  
Type II) and CF+Card (Type I/Type II)-  
compatible CompactFlash Card*6  
• Microdrive  
You can also use the Smart Media card by  
using a commercially available CompactFlash  
card adaptor*7.  
However, we do not guarantee proper  
operations for all types of CompactFlash cards.  
*6  
Use a CompactFlash card with a power  
specification of 3.3V or 3.3V/5V. You cannot use  
a type for 3V or 5V only. Do not insert other types  
of CompactFlash card into the photo frame’s  
insertion slot. The photo frame may be damaged.  
The photo frame has been demonstrated as  
operable with a CompactFlash with a capacity of  
8 GB or smaller.  
– Locations subject to static electricity or  
electrical noises  
*7  
When using a commercially available  
CompactFlash card adaptor, refer to the operating  
instructions of the adaptor you use for how to  
install the card and adaptor. When using the  
CompactFlash card adaptor, the write-protected  
card may not work properly.  
50 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
BMP: 1, 4, 8, 16, 24, 32 bit Windows  
format  
RAW (preview only*2): SRF, SR2, ARW  
(2.0 or lower version)  
(Some image file formats are not  
compatible.)  
Specifications  
x Photo frame  
LCD screen  
LCD panel:  
DPF-V900: 9 inches, TFT active matrix  
DPF-V700: 7 inches, TFT active matrix  
Total number of dots:  
DPF-V900: 1 080 000  
(750 × 3 (RGB) × 480) dots  
DPF-V700: 1 152 000  
(800 × 3 (RGB) × 480) dots  
Maximum number of pixels that can be  
displayed  
8 000 (H) × 6 000 (V) pixels  
File system  
FAT12/16/32,  
sector size of 2 048 bytes or smaller  
Image file name  
DCF format, 256 characters, within 8th  
hierarchy  
Display aspect ratio  
15:9  
Maximum number of files that can be  
handled  
Effective display area  
DPF-V900: 8.6 inches  
DPF-V700: 7 inches  
9 999 files for a memory card/an external  
device  
Internal memory capacity*3  
512 MB (Approx. 1 000 images*4 can be  
saved.)  
LCD backlight life  
DPF-V900: 15 000 hours  
DPF-V700: 20 000 hours  
(before brightness of the backlight being  
reduced to half)  
Power requirements  
DC IN jack, DC 8.4V  
Maximum decodable file size  
Power consumption  
DPF-V900: 12 W  
DPF-V700: 8 W  
100 MB  
Input/Output connectors  
HDMI OUT (output) connector  
A-TYPE connector,  
Operating temperature  
5 °C to 35 °C (41 °F to 95 °F)  
1 080i (60Hz)/1 080i (50Hz)/  
720p (60Hz)/720p (50Hz)/  
576p (50Hz)/480p (60Hz) compatible,  
BRAVIA Sync compatible  
USB connector (miniB, full-speed)  
Bluetooth/USB A connector  
(Type A, full-speed)  
Storage temperature  
–20 °C to 60 °C (–4 °F to 140 °F)  
Dimensions  
[Without the stand]  
DPF-V900:  
Approx. 245 × 162 × 38.5 mm  
(9 3/4 × 6 1/2 × 1 9/16 inches)  
DPF-V700:  
Approx. 207 × 137 × 38.5 mm  
(8 1/4 × 5 1/2 × 1 9/16 inches)  
(width/height/depth)  
Slots  
“Memory Stick PRO” slot  
SD memory card/MMC/  
xD-Picture Card slot  
CompactFlash card/Microdrive slot  
Compatible image file formats  
JPEG: DCF 2.0 compatible, Exif 2.21  
compatible, JFIF*1  
[With the stand spread out]  
DPF-V900:  
Approx. 245 × 162 × 145 mm  
(9 3/4 × 6 1/2 × 5 3/4 inches)  
TIFF: Exif 2.21 compatible  
Continued  
51 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
DPF-V700:  
Customer support home page  
The latest support information is available at the  
following home page address:  
Approx. 207 × 137 × 125 mm  
(8 1/4 × 5 1/2 × 5 inches)  
(width/height/depth)  
Mass  
DPF-V900: Approx. 800 g (1 lb 12 oz)  
DPF-V700: Approx. 550 g (1 lb 3 oz)  
(excluding the AC adaptor)  
Included accessories  
x AC adaptor AC-L200  
Power requirements  
- 100 V to 240 V, 50/60 Hz  
Power consumption  
18 W  
Rated output voltage  
8.4 V  
Dimensions  
Approx. 48 × 29 × 81 mm  
(1 15/16 × 1 3/16 × 3 1/4 inches)  
(width/height/depth)  
(excluding the protruding parts)  
Mass  
Approx. 170 g (6 oz)  
See the label of AC adaptor for more details.  
Design and specifications are subject to change  
without notice.  
*1: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format  
*2: RAW files are displayed as thumbnail preview.  
*3: The capacity is calculated as 1 MB is equivalent to  
1 000 000 bytes. The actual capacity is reduced as  
files for management and applications are  
included. Approx. 400 MB can be used for your  
actual operation.  
*4: Approximate number is shown when the images  
taken by 2 000 000 pixels equivalent camera are  
saved. The value may vary depending on the  
shooting condition.  
52 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F
Index  
Image information  
A
H
Adding to the internal  
I
L
System requirements  
C
M
Mass storage compatible  
Connecting  
T
U
Connecting to the AC power  
P
Placing in portrait or  
W
D
R
Z
Replacing the battery of the  
E
S
53 GB  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed using VOC (Volatile  
Organic Compound)-free  
vegetable oil based ink.  
Sony Corporation Printed in China  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharper Image MP3 Docking Station EC P115 User Manual
Shindaiwa Trimmer 68800 94313 User Manual
Shure Microphone RK279 User Manual
Soleus Air Air Conditioner GM TTW 10ESE User Manual
Sony Computer Drive VPCSB User Manual
Spalding Fitness Equipment LMV2053 User Manual
Speco Technologies Computer Monitor VM TV19LCD User Manual
Speco Technologies Security Camera CVC5845DNV User Manual
Sterling Plumbing Outdoor Shower 72040100 User Manual
Swann Camcorder SW241 SD4 User Manual