4-129-235-11 (1)
P/N3A221AH00-G6T-GP
Digital Photo
Frame
DPF-A72/E72/D72
Operating Instructions
Before operating this unit, please read this manual thoroughly and
retain it for future reference.
Owner’s Record
The model and serial numbers are located at the rear.
Record the serial number in the space provided below. Refer to
these numbers whenever you call upon your Sony dealer
regarding this product.
Model No. DPF-A72/E72/D72
Serial No. ________________________
© 2009 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of waste batteries
For the State of California, USA
only
Perchlorate Material - special handling may apply,
See
(applicable in the European Union
and other European countries with
separate collection systems)
This symbol on the battery or on the
packaging indicates that the battery
provided with this product shall not
Perchlorate Material: Lithium battery contains
perchlorate.
be treated as household waste. By
ensuring these batteries are disposed
of correctly, you will help prevent
potentially negative consequences for
For the Customer in Europe
This product has been tested and found compliant
with the limits set out in the EMC Directive for using
connection cables shorter than 3 meters (9.8 feet).
the environment and human health which could
otherwise be caused by inappropriate waste handling
of the battery. The recycling of the materials will help
to conserve natural resources. In case of products that
for safety, performance or data integrity reasons
require a permanent connection with an incorporated
battery, this battery should be replaced by qualified
service staff only. To ensure that the battery will be
treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment. For all other
batteries, please view the section on how to remove
the battery from the product safely. Hand the battery
over to the applicable collection point for the
recycling of waste batteries.
Attention
The electromagnetic fields at the specific frequencies
may influence the picture of this digital photo frame.
Notice
If static electricity or electromagnetism causes data
transfer to discontinue midway (fail), restart the
application or disconnect and connect the
communication cable (USB, etc) again.
Disposal of Old Electrical &
Electronic Equipment (Applicable in
the European Union and other
European countries with separate
collection systems)
For more detailed information about recycling of this
product or battery, please contact your local Civic
Office, your household waste disposal service or the
shop where you purchased the product.
This symbol on the product
or on its packaging indicates
that this product shall not be
treated as household waste.
Instead it shall be handed
over to the applicable
collection point for the
recycling of electrical and
electronic equipment. By
Notice for the customers in the
countries applying EU Directives
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-
0075 Japan. The Authorized Representative for EMC
and product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart, Germany.
For any service or guarantee matters please refer to
the addresses given in separate service or guarantee
documents.
ensuring this product is
disposed of correctly, you
will help prevent potential
negative consequences for
the environment and human health, which could
otherwise be caused by inappropriate waste handling
of this product. The recycling of materials will help to
conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Office, your household waste
disposal service or the shop where you purchased the
product.
Continued
3 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On trademarks and copyrights
Duplication, edition, or printing of a CD, TV
programs, copyrighted materials such as pictures or
publications, or any other materials except for your
own recording or creation is limited to private or
domestic use only. Unless you hold copyright or
have permission of copyright holders for the
materials to be duplicated, use of those materials
beyond this limit may infringe the provisions of the
copyright law and be subject to the copyright
holders claim for damages.
When using photo images with this digital photo
frame, pay special attention not to infringe the
provisions of the copyright law. Any unauthorized
use or modification of there’s portrait may also
infringe their rights.
•
, Cyber-shot,
, “Memory
Stick”,
, “Memory Stick Duo”,
, “MagicGate Memory
Stick”, “Memory Stick PRO”,
, “Memory Stick PRO Duo”,
, “Memory Stick PRO-HG
, “Memory Stick
Duo”,
Micro”,
ROM”,
,
, “Memory Stick-
, “MagicGate”, and
are trademarks or registered
trademarks of Sony Corporation.
• Microsoft, Windows, and Windows Vista are either
registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other
countries.
For some demonstrations, performances, or
exhibits, photography may be forbidden.
• Macintosh and Mac OS are registered trademarks of
Apple Inc. in the United States and/or other
countries.
• CompactFlash is a trademark of SanDisk
Corporation in the U.S.A.
Backup recommendations
To avoid potential risk of data loss caused by
accidental operation or malfunction of the digital
photo frame, we recommend that you save a
backup copy of your data.
•
or xD-Picture Card™ is a trademark of
FUJIFILM Corporation.
Information
• The photo frame contains fonts from Monotype
Imaging Inc.
IN NO EVENT SHALL SELLER BE LIABLE
FOR ANY DIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES OF ANY
NATURE, OR LOSSES OR EXPENSES
RESULTING FROM ANY DEFECTIVE
PRODUCT OR THE USE OF ANY PRODUCT.
• All other companies and product names mentioned
herein may be the trademarks or registered
trademarks of their respective companies.
Furthermore, “™” and “®” are not mentioned in
each case in this manual.
Sony shall assume no responsibility for any
accidental or consequential damages or loss of the
recording contents which may be caused by use or
malfunction of the digital photo frame or memory
card.
Notes on LCD screen
• Do not press against the LCD screen. The screen
may be discolored and that may cause a
malfunction.
• Exposing the LCD screen to direct sunlight for long
periods may cause malfunctions.
• The LCD screen is manufactured using extremely
high-precision technology, so over 99.99% of the
pixels are operational for effective use. However,
there may be some tiny black points and/or bright
points (white, red, blue or green in color) that
constantly appear on the LCD screen. These points
are normal in the manufacturing process and do not
affect the viewing in any way.
• Images may trail across on the LCD screen in a cold
location. This is not a malfunction.
4 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice for users
Program © 2009 Sony Corporation
Documentation © 2009 Sony Corporation
All rights reserved. This manual or the software
described herein, in whole or in part, may not be
reproduced, translated or reduced to any machine
readable form without prior written approval from
Sony Corporation.
IN NO EVENT SHALL SONY CORPORATION BE
LIABLE FOR ANY INCIDENTAL,
CONSEQUENTIAL OR SPECIAL DAMAGES,
WHETHER BASED ON TORT, CONTACT, OR
OTHERWISE, ARISING OUT OF OR IN
CONNECTION WITH THIS MANUAL, THE
SOFTWARE OR OTHER INFORMATION
CONTAINED HEREIN OR THE USE THEREOF.
Sony Corporation reserves the right to make any
modification to this manual or the information
contained herein at any time without notice.
The software described herein may also be governed
by the terms of a separate user license agreement.
Any design data such as sample pictures provided in
this software cannot be modified or duplicated except
for the purpose of personal use. Any unauthorized
duplication of this software is prohibited under
copyright law.
Please note that unauthorized duplication or
modification of portraits or copyrighted work could
infringe the rights reserved by rights holders.
On the illustrations and screen
shots used in this manual
The illustrations and screen shots used in this
manual are of the DPF-D72 unless noted
otherwise.
5 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Enjoying your photo frame in various
To display the photo frame
Connecting to the AC
Changing the settings of the auto
6 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
CompactFlash card
(DPF-D72 only) ..............................58
7 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xVarious modes
The displayed image can be switched
automatically as though you are turning the
pages of an album yourself. You can select
from various modes, including just images, a
clock, or calendar view. You can also change
playback settings such as the playback order.
Features
xSupport for various memory cards
Supports various memory cards, such as a
“Memory Stick”, CompactFlash card (DPF-
D72 only), SD memory card, and xD-Picture
Card. Just insert a memory card removed
from a digital camera or other device, and
you will be able to view the images
xAdding images to internal memory
The images you add to the album are saved
xVarious display functions
You can enjoy various viewing modes, such
as the slideshow display, Clock and calendar
display, Single view mode, and Index image
xExporting images
You can export images in the album to your
Continued
9 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xSearch function (DPF-D72 only)
You can search for images by event, folder,
Checking included
items
xAutomatic rotation of images
The photo frame automatically rotates
images to their proper orientation. Images
are also automatically rotated when the
photo frame is set in either the portrait or
Make sure that the following items are
included.
• Digital photo frame (1)
• Stand (1)
• Remote control (1)
• AC adaptor (1)
• Exchangeable panel (2) (DPF-E72 only)
• Operating Instructions (this manual) (1)
• Read This First (1)
• Warranty (1)
(In some regions, the warranty is not
supplied.)
xDisplaying images on a wall
You can hang the photo frame on the wall.
10 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear
Identifying the parts
For details, see the pages indicated in the
parentheses.
The illustrations are of the DPF-D72. The
locations and names of buttons and connectors
of the DPF-A72/E72 are identical to those of
the DPF-D72, except that the DPF-A72/E72
are not equipped with CompactFlash card/
Microdrive slot.
Front
A
Connect a USB cable when you want to use
the photo frame with a computer.
Insert the DC plug of the supplied AC adaptor
to this jack, and connect the AC adaptor and
the wall outlet.
A LCD screen
B Remote sensor
When using the supplied remote control, point
it at this sensor.
Continued
11 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
D CompactFlash card/Microdrive
N Holes for hanging unit on the wall
E 1 (on/standby) button
O Space for storing stand
F Standby indicator
G MENU button
Displays the menu.
From the menu, you can operate the same
functions as those of the buttons on the
remote control, such as [Slideshow Settings],
[Rotate], [Add to album] and [Date/time
settings].
H Direction (B/b/v/V) buttons,
Press B/b/v/V to select the menu items. Then
press
to enter the selection.
I BACK button
Returns to the previous screen.
J Reset switch
If the photo frame does not operate at all with
the power on, use a long, thin object such as a
pin to push the switch.
K Access lamp
L “Memory Stick PRO” (Standard/
Duo)/SD memory card/MMC/xD-
12 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
B SLIDE-SHOW ( ) button
This button switches from the single view
mode to the index image display.
D SINGLE (
) button
E MENU button
F BACK button
G 1 (on/standby) button
I Zoom in ( )/Zoom out ( ) buttons
K Direction (B/b/v/V) buttons
L
(enter) button
M ROTATE (
) button
13 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic operations
Replacing the battery of the
remote control
If the remote control stops working, replace the
battery (CR2025 lithium battery) with a new
one.
Preparing the remote
control
The supplied lithium battery (CR2025) has
already been inserted into the remote control.
Pull out the protective sheet before use as
shown in the figure.
1 Pull out the battery holder.
While pressing in the tab of the battery
holder, pull out the battery holder.
Protective sheet
Using the remote control
Point the top end of the remote control towards
the remote sensor on the photo frame.
2 Remove the old battery from the
battery holder and then insert a new
battery.
Insert the battery so that “+” is facing
upwards.
Remote
sensor
3 Reinsert the battery holder into the
remote control.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in fire.
Notes
• When the lithium battery becomes weak, the
operating distance of the Remote control may
shorten, or the Remote control may not function
properly. In this case, replace the battery with a
Sony CR2025 lithium battery. Use of another
battery may present a risk of fire or explosion.
Note
The photo frame may fall if you use the buttons on the
photo frame when it is hanging on the wall. Operate
the photo frame using the remote control.
14 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Using a battery other than the specified one may
result in the battery rupturing.
Setting the stand
• Dispose of used batteries as specified by the local
authorities.
• Do not leave the remote control in a very hot and
humid place.
1 Hold the photo frame tightly and
insert the stand straight into the
screw hole on the rear panel.
• Take care that no foreign objects get inside the
remote control when you, for example, replace the
battery.
• Incorrect use of the battery may cause leaking and
corrosion.
– Do not recharge the battery.
– When the remote control will not be used for a
long period of time, remove the battery from the
remote control to prevent leaking and corrosion.
– Incorrectly inserting, shorting, dismantling, or
heating the battery, or throwing it into a fire
may cause the battery to rupture or leak.
2 Screw the stand into the screw hole
About descriptions in this
manual
firmly until the stand stops turning.
The operations described in this manual are
based on remote control operation. When an
operation is performed differently, for example,
with the remote control and the buttons on the
photo frame, it will be explained in a tip.
Setting to portrait or landscape
orientation
You can set the photo frame to portrait or
landscape orientation by rotating it without
moving the stand.
Continued
15 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When the photo frame is placed in the portrait
orientation, the image is also automatically
rotated to its proper orientation.
To display the photo
frame on the wall
DPF-D72 only: The directions indicated on the
direction button on the rear panel depend on the
orientation of the photo frame.
You can hang the photo frame on the wall
using the following procedure.
1 Prepare screws (not supplied)
suitable for the screw holes on the
rear panel.
4mm (3/16 inch)
More than 25mm (1 inch)
4.2mm
Notes
(3/16 inch)
• Check whether the stand is stable. If the stand is not
set properly, the photo frame may fall over.
8.6mm
(11/32 inch)
• DPF-A72/D72 only: When the photo frame is
placed in the portrait orientation, the Sony logo
doesn't light up.
Holes for hanging
the unit on the wall
• The photo frame does not detect and rotate the
orientation of images when [Auto display
2 Screw the screws (not supplied) into
the wall.
orientation] on the
[OFF].
(Settings) tab is set to
Be sure the screws (not supplied) protrude
between 2.5 to 3mm (1/8 inch) from the
surface of the wall.
• A magnet is contained in the storage portion of the
stand. Do not keep anything that is easily affected
by magnetism, such as a cash card or credit card,
near the photo frame.
If you place the photo frame near a cathode-ray tube
television, the colors of the television screen may be
affected.
Between
Tip
2.5mm to 3mm
(1/8 inch)
It is easier to turn the stand if you wind or wrap a
rubber band tightly around the stand when you
remove the stand from the photo frame.
3 Hang the photo frame on the wall by
fitting the one hole on the rear panel
to the screws on the wall.
Notes
• Use screws suitable for the quality of the material of
the wall. The screws may be damaged, depending
on the type of material used in the wall. Set the
screws in a pillar or stud in the wall.
16 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you want to re-insert the memory card,
remove the photo frame from the wall, then eject
and re-insert the memory card while the photo
frame is placed on a stable surface.
To exchange a panel
(DPF-E72 only)
• Remove the stand and store it in the storage portion
provided on the rear when you hang the photo frame
on the wall.
You can exchange the original panel with an
exchangeable panel supplied.
1 Insert a long, thin object such as a
pin into the hole next to the space
for storing stand on the rear of the
photo frame and lift up the front
panel.
Since a magnet is contained in the
storage portion, you can keep the
stand attached to the portion.
• Connect the DC cable of the AC adaptor to the
photo frame and hang the photo frame on the wall.
Then connect the AC adaptor to the wall outlet.
• We take no responsibility for any accidents or
damage caused by defects of attachment, misuse, or
natural disasters, etc.
2 Remove the panel.
Continued
17 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Place an exchangeable panel to the
photo frame, while aligning the hole
on an exchangeable panel to the
remote sensor of the photo frame.
Connecting to the AC
power source
Remote sensor
1 Insert the plug of the AC adaptor
into the DC IN 5 V jack on the rear
of the photo frame.
2 Connect the AC adaptor to the wall
outlet.
The photo frame is automatically turned
on.
4 Press the four corners of the
exchangeable panel to snap it into
the photo frame.
To DC IN 5 V
jack
DC Plug
To wall outlet
DC cable
AC adaptor
main unit
AC plug
Notes
• The socket outlet should be as close as possible to
the unit, and easily accessible.
• Do not place the photo frame on an unsteady or
tilted surface.
• Connect the AC adaptor to an easily accessible wall
outlet close by. If trouble occurs while using the
adaptor, immediately shut off the power by
disconnecting the plug from the wall outlet.
18 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not short the plug of the AC adaptor with a
metal object. Doing so may cause a malfunction.
Removing the AC plug from the wall
outlet
• Do not use the AC Adaptor placed in a narrow
space, such as between a wall and furniture.
If the AC plug remains inserted in the wall
outlet, remove it as follows:
• Insert the plug of the AC adaptor firmly, if the
connection is loose, the photo frame may turn off
when it is moved.
• After use, remove the AC adaptor from the
DC IN 5 V jack of the photo frame, and remove the
AC adaptor from the outlet.
• Even if your photo frame is turned off, power will
still be supplied if the AC adaptor remains
connected and plugged into the wall outlet.
• Do not turn the photo frame off or disconnect the
AC adaptor from the photo frame before the
standby indicator turns red. Doing so may damage
the photo frame.
Metal terminals at the rear of the AC plug.
About the AC plug
Attaching the AC plug
Attach the AC plug to the AC adaptor main
unit as follows:
PUSH tab clicks when the AC plug is slid firmly
into place.
Notes
• If handled roughly, the AC plug may become
detached from the AC adaptor main unit and remain
in the wall outlet. If this occurs, grasp the AC plug
with dry hands as illustrated above and remove it
from the wall outlet. Do not use a tool. Be careful
not to touch the metal terminals at the rear of the
AC plug.
Notes
• Check to see if there is no trouble with the AC
adaptor main unit and AC plug, and then slide the
AC plug into the AC adaptor main unit until it
clicks into place.
• The AC plug may be removed from the AC adaptor
main unit by pushing the “PUSH” tab. When using
the AC adaptor, however, you do not have to
remove the AC plug. Make sure to use the AC
adaptor with the AC plug firmly attached. If the AC
plug is removed, slide it into the AC adaptor main
unit until it clicks into place as illustrated above.
• If there is any problem with the AC adaptor main
unit or AC plug, consult with your Sony service
facilities for repair.
• The AC plug shape may differ depending on the
region you purchase the photo frame.
19 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations in an initial state
Turning the photo frame
on
When the photo frame is turned on without a
memory card connected, the initial display
below appears on the screen.
When you have already turned on your photo
frame in the previous section, skip to the next
section.
Turning on the power
Press 1 (on/standby) on the photo frame or
remote control to turn on the power. The
standby indicator turns to green from red. The
Sony logo on the front panel lights up (DPF-
A72/D72 only).
If the photo frame is not operated for 10
seconds, the demo mode is displayed. If any
other button than the power button is pressed,
the screen returns to the initial display.
First, press MENU during the initial display,
and then set the date and time.
Turning off the power
Hold 1 (on/standby) on the photo frame or
remote control until the power turns off. The
standby indicator turns to red from green.
Note
Do not turn the photo frame off or disconnect the AC
adaptor from the photo frame before the standby
indicator turns red. Doing so may damage the photo
frame.
20 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Select the format of the date.
1Press v/V to select [Date Display Order]
Setting the current time
and then press
2Press v/V to select a format and then
press
.
The clock of the photo frame needs to be
adjusted in order to display an accurate time in
the clock and calendar view modes.
.
• Y-M-D
• M-D-Y
• D-M-Y
1 Press MENU.
7 Set the day to start the week for the
calendar.
The menu screen is displayed.
2 Press B/b to select the
(Settings) tab.
You can set the day that appears on the
very left when the calendar is displayed.
The settings screen is displayed.
1Press v/V to select [First Weekday] and
then press
2Press v/V to select [Sunday] or
.
Tip
You can use the B/b buttons only when a
memory card is inserted in the photo frame, or
anything other than the clock and calendar
[Monday] and then press
.
8
Select the time display.
1Press
and then press
2Press /V to select [12 hours] or
[24 hours] and then press
v/V to select [12hr/24hr display]
.
3 Press
v
/V to select [Date/time
v
settings] and then press
.
.
The Date/time settings screen is displayed.
9 Press MENU.
The menu screen is closed.
4
5
Adjust the date.
1Press v/V to select [Date] and then
press
.
2Press B/b to select year, month, and
day, and then press v/V to select a
value, then press
.
Adjust the time.
1Press v/V to select [Time] and then
press
.
2Press B/b to select hour, minute, and
second, and then press v/V to select a
value, then press
.
21 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Inserting a memory card
• When inserting the memory card, it will only insert
part of the way, so do not try to force it as this could
damage the memory card and/or photo frame.
Insert the memory card firmly into the
corresponding slot with its label side
facing toward you (when you are facing
the back side of the photo frame).
• The “Memory Stick PRO” (Standard/Duo)/SD
memory card/MMC/xD-Picture Card multi-purpose
slot automatically detects the card type. The slot is
also both a “Memory Stick” standard and Duo size
compatible slot, so you do not need a “Memory
Stick” adaptor.
The access lamp flashes when the memory card
is inserted correctly. Reinsert the memory card
after checking the label side of the memory
card if the access lamp does not flash.
• Do not insert cards both into the slot Aand B
simultaneously.
• Before using a memory card, see “About memory
Display priority of images
If a memory card is inserted, the images of the
inserted memory card are displayed automatically.
For details on the memory cards you can use
CompactFlash card
(DPF-D72 only)
To manually change the memory card to be displayed,
specify it in
The photo frame displays the images of the device
in the following priorities.
• Memory cards b Internal memory
• If multiple memory cards are inserted when the
photo frame is turned on, the images of the first
memory card you inserted take priority and are
displayed.
• If multiple memory cards are inserted while the
photo frame is turned off, the priority order for
display is as follows.
“Memory Stick” b CompactFlash card (DPF-D72
only)b SD memory card/xD-Picture Card
• However, priority is given to the memory card
which was displayed on the screen you turned off
the photo frame.
• If no memory card is inserted, the images saved in
the album in the internal memory are displayed.
Access lamp
Notes
Insert “Memory Stick Duo” into
the slot B.
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often.
Insert xD-Picture Card, SD memory card, or
“Memory Stick” from the top into the slot A.
• The photo frame can display JPEG image files
compatible with DCF format or RAW files taken by
a Sony digital camera. Any other file (such as files
made or edited using a computer or RAW files
taken by digital cameras other than a Sony digital
camera, etc.) may not be displayed.
To remove a memory card
Remove the memory card from its slot in the
opposite direction from which it was inserted.
22 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press B/b/v/V or VIEW MODE to
select the style you want and then
Changing the display
press
.
1 Press VIEW MODE.
The view mode screen is displayed.
2 Select the group you want.
Group
Explanation
Displays a slideshow display
style.
Slideshow
Displays a clock or calendar
style.
Clock and
calendar
Displays a single image
style.
Displays a thumbnail list
style.
Index
Tip
Select the group you want using B/b after
moving the cursor to the group area using B/b/
v/V, when you operate the photo frame using
the buttons on the photo frame.
23 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Slideshow display
Group
Image
Style
Explanation
Single view
Images are displayed on a single screen, one
after another, with the effect selected in the
[Slideshow Settings] menu.
A
Slideshow
Multi image view
Clock view
Displays multiple images at the same time.
B
C
D
Displays images with the present date and time.
Calendar view
Displays images, one after another, while
showing a calendar. The present date and time
is displayed.
Time Machine
(DPF-D72 only)
Displays images with the shooting date and
time. The present date and time cannot be
displayed.
E
F
Random view
Displays images while randomly switching
between a number of different slideshow styles
and effects.
A
B
C
D
E
F
• You can set the interval, effect, listing order, or
color effect when you select the slideshow display.
Tips
• If the power is on, and no memory card is inserted,
the images stored in internal memory are displayed.
If no images are saved in internal memory,
demonstration mode starts automatically.
Demonstration mode ends if a button other than 1
(on/standby) is pressed.
• You can select the single view mode when you
press
on the photo frame when the image you
want appears in the slideshow display.
• You can use the VIEW MODE button on the photo
frame.
• For details on the playback order in a slideshow
display, see page 45.
24 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Clock and calendar display
Clock 1
Clock 2
Clock 3
Clock 4
Clock 5
Clock 6
Clock 7
Clock 8
Clock 9
Clock 10
Clock 11
(DPF-D72 only)
Calendar 1
Calendar 2
Calendar 3
Lunar Calendar
(when you select
[Simplified
Chinese] in
[Language setting])
(DPF-D72 only)
Note
Tip
You can select only the
clock and calendar are displayed.
(Settings) tab when the
You can use the VIEW MODE button on the photo
frame.
25 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Single view mode
Group
Image
Style
Explanation
Entire image
Displays an entire image in the screen. You can
switch the images to be displayed by pressing
B/b.
A
Fit to screen
Displays an image over the whole screen. You
can switch the images to be displayed by
pressing B/b.
B
C
Entire image (with
Exif)
Displays image information, such as the image
number, file name, and shooting date while
displaying the entire image. You can switch the
images to be displayed by pressing B/b.
Refer to “About the information display”
(page 28) for details on the image information.
Fit to screen (with
Exif)
Displays image information, such as the image
number, file name, and shooting date in fit to
screen mode. You can switch the images to be
displayed by pressing B/b.
D
Refer to “About the information display”
(page 28) for details on the image information.
A
B
C
D
Tips
• If the power is on, and no memory card is inserted,
the images stored in internal memory are displayed.
If no images are saved in internal memory,
demonstration mode starts automatically.
Demonstration mode ends if a button other than 1
(on/standby) is pressed.
• You can set the image display mode when you press
B/b to select
and then press B/b to select
the entire image mode or fit to screen mode after
pressing VIEW MODE. Not all images are able to
use the fit to screen mode.
• You can use the VIEW MODE button on the photo
frame.
26 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index image display
Group
Image
Style
Explanation
Index1
Displays a list of large thumbnails. You can
A
select an image by pressing B/b/v/V.
Index
Index2
Index3
Displays a list of thumbnails. You can select an
image by pressing B/b/v/V.
B
C
Displays a list of small thumbnails (DPF-D72
only). You can select an image by pressing B/
b/v/V.
A
B
C
(DPF-D72 only)
Tips
• A thumbnail is a small-sized image for index use
that is recorded in the pictures taken by a digital
camera.
• If the power is on, and no memory card is inserted,
the images in internal memory are displayed. If no
images are saved in internal memory,
demonstration mode starts automatically.
Demonstration mode ends if a button other than 1
(on/standby) is pressed.
• You can select the single view mode when you
press
on the photo frame when the image you
want appears in the index image display.
• You can use the VIEW MODE button on the photo
frame.
Continued
27 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4Setting information
About the information display
Icons
Meaning
Protect indication
Associated file indication
(Displayed when there is an
associated file such as a motion
file or a miniature e-mail image
file.)
Displays when you have
registered a mark.
The following information is displayed.
5Image number (folder-file number)
This is displayed if the image is DCF
compliant.
1Display type
– Entire image
6Shooting date/time
– Fit to screen
– Entire image (with Exif)
– Fit to screen (with Exif)
2Image display order/Total number of images
Input indications for an image are displayed.
Icons
Meaning
Internal memory input
“Memory Stick” input
CompactFlash input
SD Memory Card input
xD-Picture Card input
3Image details
– File format (JPEG(4:4:4), JPEG(4:2:2),
JPEG(4:2:0), BMP, TIFF, RAW)
– Number of pixels (width × height)
– Manufacturer name of image input device
– Model name of image input device
– Shutter speed (e.g.: 1/8)
– Aperture value (e.g.: F2.8)
– Exposure value (e.g.: +0.0EV)
– Rotation information
28 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced operations
Changing the settings of the
slideshow
Enjoying a slideshow
You can display images stored in the internal
memory or on a memory card, one after
another, automatically.
1 Press MENU.
The menu is displayed.
The slideshow starts from the last image that
was displayed the previous time, if you turn off
and then on the photo frame.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
3 Press v/V to select [Slideshow
1 Press VIEW MODE.
Settings] and then press
The slideshow settings screen is
displayed.
.
The view mode screen is displayed.
2 Select
(slideshow).
Tip
Select
(slideshow) using B/b after moving
the cursor to the group area using B/b/v/V
when you operate the photo frame using the
buttons on the photo frame.
4 Press v/V to select the item and
then press
.
Refer to the tables on the next page for
details on the setting items.
Notes
3 Press B/b/v/V to select the style you
• Note the following when you select a slideshow
using the image stored on the memory card.
want, then press
.
– Due to one of the characteristics of the memory
card devices, images may be subject to data
error when read too often.
– Do not run a slideshow for a long time with a
small number images. This may cause data
error.
– We recommend you back up images on the
memory card often.
• When the photo frame is, for instance, displaying a
slideshow, changes to the settings of some items are
unavailable. These items are displayed in gray and
cannot be selected.
Refer to “Slideshow display” (page 24)
for details on the slideshow styles.
Continued
29 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• The slideshow starts from the first image if you turn
off the photo frame, or if you reset the photo frame.
• When the screen is too bright, it may make you feel
nauseous. Be careful that you do not make the
brightness settings too bright when you use the
photo frame.
Tip
You can also use the VIEW MODE button on the
photo frame.
30 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Interval
Set a value from 3 sec., 7 sec.*, 20 sec., 1 min., 5 min., 30 min., 1 hour,
3 hours, 12 hours, 24 hours for the interval between images.
Note
An image may not switch at the intervals you set on the menu, depending
on the style of the slideshow or the size of the image.
Effect
Center cross
Transitions to the next image as though the previous
image is being pushed from the center to the four
corners.
Vert. blinds
Horiz. blinds
Fade*
Transitions to the next image as though blinds are
being lowered vertically.
Transitions to the next image as though blinds are
being pulled horizontally.
Transitions to the next image by fading out the current
image and fading in the next image.
Wipe
Transitions to the next image as though the current
image is being wiped off the screen to reveal the next
image.
Random
ON
Uses the above five effects randomly.
Displays images randomly.
Shuffle
OFF*
Cancels shuffle playback.
Color effect
Color*
Sepia
Displays an image in color.
Displays an image in a sepia color.
Displays an image in monochrome.
Monochrome
Display Mode
You can select the view mode for the single image display.
Note
The original image data will not change.
Entire image*
Displays an entire image enlarged to proper size. (An
image may be displayed with margins on the top,
bottom, left and right.)
Fit to screen
Zooms in at the center of the image enough to fill the
whole screen.
Note
An image may not display with the display size you set
on the menu, depending on the style of the slideshow.
31 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Refresh mode
(DPF-D72 only)
Adding images to the
internal memory
Due to one of the characteristics of the device,
images stored for a long time or read many
times may be subject to data error when read
too often.
You can use the photo frame as a digital album,
saving important images in the internal
memory.
Tip
This photo frame refreshes the internal memory
automatically to prevent these errors,
In [Image file size] of the menu, you can preset
whether to optimize the size of images or save images
as is, without compressing them, when you save them
to the internal memory (page 45).
depending on the status of the internal memory.
The confirmation screen used for refreshing the
internal memory is displayed automatically
when the refresh is needed.
When [Image file size] is set to [Album], up to
approx. 2,000 images (DPF-D72), or 250 images
(DPF-A72/E72) can be added to the album. When set
to [Original], the number of images that can be saved
may vary, depending on the original image file size.
The refresh starts when you select [OK]. The
Refresh also starts automatically when no
operation is attempted for 30 seconds. If you
select [Cancel], the confirmation screen used
for refreshing the internal memory is displayed
the next time.
1 Press
(Album) when an image
stored on the memory card is
displayed on the screen.
Tip
Select [Add to album] using v/V after pressing
the MENU button and then select
(Editing) using B/b.
Single image display
Do not turn the photo frame to OFF while the
internal memory is being refreshed. It may
cause a malfunction.
It may take approximately 5 minutes to refresh
the internal memory.
Notes
• We recommend that you perform a backup of your
data periodically to avoid losing it.
• Do not run a slideshow with less than 10 images
continuously if you have set the interval time for the
slideshow to 3 seconds. You may not be able to
protect some images in the internal memory.
32 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Slideshow display
Refer to “Searching for an image
1Press B/b/v/V to select the image to
add to the album and then press
check mark will be attached to the
check box of each selected image.
Repeat this operation to add multiple
images at the same time.
. A
Index image display
To cancel the selection, select images to
cancel and then press
to delete the
check mark in the check box.
2Press MENU.
The confirmation screen used for
selecting a folder is displayed.
2 Press v/V to select [Add this image],
[Selected images] or [Add all
images] and then press
.
If you select [Add this image], the image
currently displayed is added to the album.
Go to step 4. (This item cannot be selected
on the slideshow display.)
4 Press v/V to select the folder you
want and press
.
The confirmation screen used to decide
whether to add an image or not to the
internal memory is displayed.
If you select [Selected images], you can
select the image you want to add from the
image list. Go to step 3.
If you select [Add all images], the image
list is displayed. A check mark is attached
to the check box of all the images. Go to
step 4.
3 Specify the image to add from the
image list.
About image searching in the
image list (DPF-D72 only)
Tip
During a search: Displays all the images
applicable to the criteria used for the
search.
A new folder is created automatically when you
select [New folder].
5 Press v/V to select [Yes] and then
Other than during a search: Displays all
images in the device displayed on the
screen.
press
.
The image is saved in the specified folder
in internal memory.
Continued
33 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press
when the confirmation
screen is displayed.
Exporting an image
Notes
You can export the images in the internal
memory to a memory card.
• Images in the internal memory cannot be added to
the album.
• Do not turn off the power, remove the memory card
while an image is being added. Doing so may
damage the photo frame or memory card, or
damage the data.
1 Press MENU when an image stored
on the internal device is displayed
on the screen.
The menu is displayed.
Tips
• To perform this operation using the remote control,
press the MENU button on the remote control and
then press v/V to select [Add to album] from
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
(Editing) and then press
.
• You can also use the MENU button on the photo
frame.
3 Press v/V to select [Export] and
then press
.
• You can change the thumbnail size using [
the image list.
/
] in
The Export menu is displayed.
Single image display
• Due to one of the characteristics of the internal
memory device, images stored for long time or read
many times may be subject to data error when read
too often. We recommend that you perform a
backup of your data periodically to avoid losing it.
4 Press v/V to select [Export this
image], [Selected images] or [Export
all images] and then press
.
If you select [Export this image], the
image currently displayed is exported to
the device. Go to step 6. (This item cannot
be selected on the slideshow display.)
If you select [Selected images], you can
select the image you want to export from
the image list. Go to step 5.
If you select [Export all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
34 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Specify the image to export from the
image list.
7 Press v/V to select the folder you
want to save and press
.
About image searching in the
The confirmation screen used to decide
image list (DPF-D72 only)
whether to export or not is displayed.
During a search: Displays all the images
applicable to the criteria used for the
search.
Other than during a search: Displays the
image list of the album on the screen.
Refer to “Searching for an image
1Press B/b/v/V to select the image you
want to export and then press
. A
check mark will be attached to the
check box of each selected image.
Repeat this operation to export multiple
images at the same time.
Tip
A new folder is created automatically when you
select [New folder].
8 Press v/V to select [Yes] and then
To cancel the selection, select images to
press
.
cancel and then press
to delete the
The exporting is finished.
check mark in the check box.
2Press MENU.
The screen used for selecting the device
to which to export is displayed.
9 Press
when the confirmation
screen is displayed.
The image is copied to the specified
device.
6 Press v/V to select the device to
which to export the image and then
Note
press
.
Do not turn off the power, remove the memory card
during exporting. Doing so may damage the photo
frame or memory card, or damage the data.
Tips
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image to export when
you select the index image display.
• Any device that is not recognized by the photo
frame is displayed in gray and you cannot select it.
35 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeat this operation to delete multiple
images at the same time.
To cancel the selection, select images to
Deleting an image
cancel and then press
to delete the
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
check mark in the check box.
2Press MENU.
The delete confirmation screen is
displayed.
2 Press B/b to select the
tab.
(Editing)
6 Press v/V to select [Yes] and then
The screen used for editing is displayed.
press
.
The image is deleted.
3 Press v/V to select [Delete] and
then press
.
7 Press
when the confirmation
screen is displayed.
4 Press v/V to select [Delete this
image], [Selected images] or [Delete
To format the internal memory
all images] and then press
.
If you select [Delete this image], the
image currently displayed is deleted. Go
to step 6. (This item cannot be selected on
the slideshow display.)
1 Press MENU.
The menu is displayed.
2 Press v/V to select the
(Settings) tab.
The settings screen is displayed.
If you select [Selected images], you can
select the image you want to delete from
the image list. Go to step 5.
3 Press v/V to select [Initialize] and then
press
.
If you select [Delete all images], the
image list is displayed. A check mark is
attached to the check box of all the
images. Go to step 6.
4 Press v/V to select [Format internal
memory] and then press
.
The confirmation screen used for
initializing the internal memory is
displayed.
5 Specify the image to delete from the
image list.
5 Press v/V to select [Yes], then press
.
About image searching in the
image list (DPF-D72 only)
Notes
• When the message [Cannot delete a protected
During a search: Displays all the images
applicable to the criteria used for the
search.
image.] appears on the screen, the image file was set
to Read Only on a computer. In this case, connect
the photo frame to a computer, and delete this file
using the computer.
Other than during a search: Displays all
images in the device displayed on the
screen.
• The total capacity of the internal memory is not
equal to the remaining capacity, even immediately
after initialization.
Refer to “Searching for an image
• If deletion has started, the deleted image cannot be
recovered even if you stop deletion. Delete images
only after confirming you actually want to delete
them.
1Press B/b/v/V to select the image to
delete and then press
. A check mark
will be attached to the check box of
each selected image.
36 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Registering a mark
(DPF-D72 only)
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image when you
select the index image display.
You can produce a slideshow only with images
which have been selected beforehand and have
been marked. You can easily check for images
with marks using the index image display or
single view mode.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Marking] and
then press
.
4 Press v/V to select the mark you
want and then press
.
5 Press v/V to select [Mark this
image], [Selected images] or [Mark
all images] and then press
.
If you select [Mark this image], the image
currently displayed will be marked and
showed in the future. Go to step 7. (This
item cannot be selected on the slideshow
display.)
If you select [Selected images], you can
select the image to which you want to
attach a mark from the image list. Go to
step 6.
If you select [Mark all images], the image
list is displayed. A check mark is attached
Continued
37 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
to the check box of all the images. Go to
step 7.
[Unmark all images]
During a search: Removes a marks from all the
images applicable to the criteria specified in the
search.
6 Specify the image to which you want
to attach a mark from the image list.
About the image list
Other than during a search: Remove all marks
from all images stored on the device displayed.
During a search: Displays all the images
applicable to the criteria used for the
search.
Note
A mark is removed when the power is turned off, or if
you remove the memory card if you have attached a
mark to an image stored on a memory card.
Other than during a search: Displays all
images in the device.
Refer to “Searching for an image
Tips
• You can select a mark from among 3 types.
1Press B/b/v/V to select the image to
which to attach and then press . A
check mark will be attached to the
image. Repeat this operation to attach a
mark to multiple images at the same
time.
• You can also use the MENU button on the photo
frame.
• You can enlarge or reduce the image when you
select the index image display.
To cancel the selection, select an
images you want to cancel and then
press
to remove the check mark
from the check box.
2A mark will be attached to the image
for which a check mark has been placed
in the check box.
If a check mark is removed from the
check box of an image, the mark will be
removed from the image.
7 Press v/V to select [Yes] and then
press
.
The mark is attached to the selected
image.
To delete the registration of a
mark
Select [Unmark this image] or [Unmark all
images] and then press
in step 5. You can
also cancel the selection when you remove the
check mark from the check box.
[Unmark this image]: Removes a mark from
the image currently displayed. (This item
cannot be selected on the slideshow display.)
38 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the search for an
image
Press the MENU button when an image is
displayed on the screen and then select [Exit
search (show all photo)].
Searching for an image
(Filtering) (DPF-D72 only)
You can search for an image which is stored in
internal memory or on a memory card. You can
filter an image using various criteria, such as
the date, the folder in which the image is saved,
the orientation of the image or mark, etc.
To change the criteria for a
search
Press the BACK button when an image you
searched for is displayed on the screen.
1 Press MENU when an image is
displayed on the screen.
The menu is displayed.
Notes
• Do not turn off the power, remove the memory card
during a searching. Doing so may damage the photo
frame or memory card, or damage the data.
2 Press B/b to select the
(Editing)
• The search is cancelled automatically in the
following cases.
tab.
The screen used for editing is displayed.
– When you change the playback device
– When you search for an image which is stored
on a memory card and then remove that
memory card
Note
You cannot select the
the clock and calendar are displayed.
(Editing) tab when
Tip
3 Press v/V to select [Search] and
You can also use the MENU button on the photo
frame.
then press
.
4 Press v/V to select the criteria you
want and then press
.
• [Search by date]: Filters by the date.
• [Search by folder]: Filters by the folder.
• [Search by vertical/horizontal]: Filters
by the image orientation.
• [Search by mark]: Filters by the mark.
5 Press v/V to select the item you
want and then press
.
39 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying the playback Adjusting the image size
device
and position
You can specify a memory card to be
displayed.
Enlarging/reducing an image
You can enlarge or reduce an image in single
view mode.
1 Press MENU.
The menu is displayed.
1 To enlarge an image, press
(zoom in) on the remote control. To
reduce an enlarged image, press
(zoom out).
2 Press B/b to select the
(Select
device) tab.
The screen used for selecting a device is
displayed.
Each press of the button enlarges the
image further. You can enlarge an image
to a maximum of 5 times the original
scale. You can move an enlarged image
up, down, left, and right.
About crop and save
• The screen currently displayed is saved as it
was trimmed after you press B/b/v/V to
move the enlarged image and then press the
MENU button.
• You can select [Save as new image] or
[Overwrite] by pressing the MENU button
when the image is enlarged or reduced. Press
v/V to select the method used to save the
image.
Tip
Insert the device at this point during the
procedure if the device you want to use cannot
be selected.
3 Press v/V to select the device you
• If you select [Save as new image], the image
is saved as a new image.
• If you select [Overwrite], the image is
overwritten. A confirmation screen is
displayed when you select [Overwrite]. Press
want to display and then press
The images of the selected device are
displayed.
.
Tips
v/V to select [Yes] and then press
to
• You can also use the MENU button on the photo
frame.
save the image. Press again when the
confirmation screen is displayed after saving
is finished.
• The search is cancelled automatically when you
change the playback device during a search.
Notes
• Enlarging an image may reduce the quality
depending on the image size.
• It is not possible to enlarge an image using the
buttons on the photo frame.
40 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
Rotating an image
• The information used to rotate the image is retained
even after the power is turned off.
Press ROTATE ( ) on the remote
control.
Each press of the button rotates the image 90
• You can rotate the image of the index image
display.
degrees counter-clockwise.
Operate from the menu of the
photo frame
1 Press MENU in single display mode.
The menu is displayed.
2 Press B/b to select the
(Editing)
tab.
The screen used for editing is displayed.
3 Press v/V to select [Rotate] and
then press
.
The Rotate menu is displayed.
4 Press v/V to select the direction to
rotate and then press
.
•
:
Rotates the image 90 degrees
clockwise.
•
:
Rotates the image 90 degrees counter-
clockwise.
5 Press v/V to select [OK] and then
press
.
Note
An enlarged image cannot be rotated.
41 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Set the time setting.
Changing the settings of
the auto power on/off
function
[Simple]
You can use the timer function to turn the
photo frame on or off automatically when the
photo frame is turned on.
1 Press MENU.
1Press v/V to select [Auto power ON/
The menu is displayed.
OFF] and then press
2Press v/V to select [Enable] and then
press
.
2 Press B/b to select the
(Settings) tab.
.
3Set the auto on/off timer.
The settings screen is displayed.
Press v/V to set the time you want.
AM or PM is displayed on the right of
the screen when you select [12 hours]
on the time display setting.
3 Press v/V to select [Auto power ON/
OFF] and press
.
The screen used for setting a value for
[Auto power ON/OFF] is displayed.
4Set the auto ON/OFF day.
When using DPF-A72/E72, you can set
the auto power function on [Simple] mode
only, so skip to step 5.
Press v/V to select the day you want to
use this function and then press
check. Press v/V to select [OK] and
then press
to
.
[Advanced] (DPF-D72 only)
4 Press v/V to select [Simple] or
[Advanced] and then press
(DPF-D72 only)
1Press B/b/v/V to select the time you
want to use the auto power on/off
function.
You can set this function according to a
day of the week by one hour units.
The color of the selected time zone
[Simple]: Sets the auto power ON/OFF
function finely in one minute increments.
[Advanced]: Sets the auto power ON/OFF
function according to a day of the week by
one hour units.
changes to blue after you press
. The
power supply of the photo frame will be
turned on when the blue time zone time
occurs. The color of the selected time
42 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
zone changes to gray, after you select
the blue time zone and then press
The power supply of the photo frame is
turned off while it is in the gray time
zone.
.
Changing the settings
You can change the following settings.
• Slideshow Settings
• Auto power ON/OFF
• Date/time settings
• General Settings (Listing Order, Sony logo
ON/OFF etc,.)
Tip
The power is turned off automatically at the
time you set for [Auto power OFF] when
you are using the photo frame.
• Language setting
• Initialize
The power is turned on automatically at the
time you set for [Auto power ON] during the
standby mode.
2Press B/b/v/V to select [OK].
Setting procedure
Note
Only internal memory can be formatted.
1 Press MENU.
The menu is displayed.
2 Press B/b to select the
(Settings) tab.
The settings screen is displayed.
Continued
43 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press v/V to select the item you
Tip
want to change and then press
.
You can also use the MENU button on the photo
frame.
The setting screen of the selected item is
displayed.
For example, when [Slideshow Settings]
is selected.
4 Press v/V to select the item you
want to change and then press
This enables you to set each of the items
(page 45).
.
Note
When the photo frame is, for instance,
displaying a slideshow, some settings of some
items cannot be changed. They are displayed in
gray and cannot be selected.
5 Press v/V to select a setting value
and then press
.
Each time you press v/V (v/V from the
photo frame), the setting value changes. In
the case of a numerical value, press V to
increase the value and press v to decrease
the value.
If you press
, the setting is confirmed.
6 Press MENU.
The menu closes.
To reset to factory default
settings
1 Press MENU and then select
(Settings) -
[Initialize] by pressing B/b/v/V.
2 Press v/V to select [Reset] and then press
.
All adjusted values, except for the clock
settings, are reset to the default settings.
44 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Items to set
*: Factory default settings
Item
Setting
Description
Slideshow
Settings
Auto power
ON/OFF
Sets the timer function which turns the power supply of the photo frame on or off,
Simple
Power-ON
timer
You can set the timer (time/day) and input time for the
power to turn on automatically, when you set this
function to enable.
Power-OFF
timer
You can set the timer (time/day) and input time for the
power to turn off automatically, when you set this
function to enable.
Advanced
(DPF-D72
only)*
The following functions are enabled when you press the following buttons
after you have set time or date to turn on or off the photo frame
automatically.
Execute
Returns to the previous screen after confirming the
operation.
Cancel
Returns to the previous screen after cancelling the
operation.
Reset all
Deletes all the selected times.
Setup method
(DPF-D72
only)
Advanced
Sets the auto power ON/OFF function according to a
day of the week by one hour units.
Simple
Sets the auto power ON/OFF function finely in one
minute increments.
Date/time
settings
General
Settings
Listing Order
Sets the display order of images. This setting affects the order in
[Slideshow Settings].
Number Order* Displays images in order of image numbers.
Shoot. Date
Displays images in order of shooting date.
Auto display
orientation
ON*/OFF: You can set the photo frame to automatically detect and rotate
the orientation of images.
LCD backlight
Allows you to set the brightness of the backlight of the LCD screen to a
level from 1 to 10*.
Continued
45 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
*: Factory default settings
Item
Setting
Description
General
Settings
Image file size
Album*
Compresses images and saves them to the internal
memory.You can save more images, but a
deterioration in image quality compared to the original
images is noticeable when the images are displayed on
a large monitor via a computer or other device.
Original
Saves images to the internal memory without
compressing them. There is no deterioration, but you
can save fewer images.
ON*/OFF: You can set whether the photo frame's Sony logo lights or not.
Sony logo ON/
OFF (DPF-
A72/D72
only)
System
Version
Displays the version of the firmware of the photo frame.
Information
Internal
memory
Memory
capacity
Indicates the maximum amount of space available in
internal memory in the initial state.
Remaining
capacity
Indicates the amount of free space currently available
in internal memory.
Language
setting
Sets the display language on the LCD screen.
Japanese, English*, French, Spanish, German, Italian, Russian, Simplified Chinese,
Traditional Chinese, Dutch, Portuguese,
Note
Default language setting may vary in some regions.
Initialize
Format internal You can format the internal memory.
memory
Notes
• All the images added to the internal memory will be deleted.
• Do not format the internal memory by using a connection to a PC.
Reset
Returns all settings to their factory defaults except for the current date and
time setting of the [Date/time settings].
Use a long thin object such as a pin to push the switch.
46 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a computer
Connecting to a computer to
exchange images
Connecting to a
computer
1 Connect the photo frame to the AC
You can connect to a computer to view and
copy images from the internal memory of the
photo frame to the computer, and copy images
from the computer to the photo frame.
2 Connect the computer and photo
frame with a commercially available
USB cable.
System requirements
To connect a computer to the picture frame,
your computer must satisfy the following
recommended system requirements.
x Windows
Recommended OS: Microsoft Windows Vista
SP1/Windows XP SP3/Windows 2000
Professional SP4
To USB B
connector
Port: USB port
x Macintosh
Recommended OS: Mac OS X (10.4 or later)
Port: USB port
Notes
• If multiple USB devices are connected to a
computer or if a hub is used, a problem may occur.
In such a case, simplify the connections.
Computer
To USB connector
• You cannot operate the photo frame from another
USB device being used simultaneously.
Note
Use a B-Type USB cable that is less than 3
meters long.
• Do not disconnect the USB cable during data
communication.
3 Turn the photo frame to ON.
• Operation with all computers that satisfy the
recommended system requirements is not
guaranteed.
4 When the [AutoPlay] window
appears on the computer display,
click [Open folder to view files].
If the [AutoPlay] window does not appear,
click [Computer (My Computer)] in the
Start menu, and then open the removable
disc.
• The photo frame has been demonstrated as operable
when connected to PC or Sony digital photo printer.
When other devices are connected to the photo
frame, these devices may not recognize the internal
memory of the photo frame.
Continued
47 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Move the cursor in this window and
right click, and then click [New] -
[Folder].
Disconnecting your computer
Name this new folder. In this manual, the
folder name “sony” is used as an example.
Disconnect the USB cable or turn the photo
frame to OFF after disconnecting it from your
computer.
1 Double-click
on the Task Tray.
2 Click (USB Mass Storage
Device) t [Stop].
3 Click [OK] after checking the drive
you want to remove.
6 Double click to open this “sony”
folder.
7 Open the folder that contains the
image files you want to copy, and
then copy the image files by using
drag-and-drop.
Notes
• When saving images from a computer in the
internal memory, make a folder in the internal
memory and save the images in this folder. If you
do not make a folder, you can only save up to 512
images. In addition, the number of images may be
reduced depending on the file name length or
character type.
• A particular image may not be displayed in order of
the shooting date on the index image display, etc as
the information on the shooting date may have been
changed or lost when you edited or saved that image
file on a computer.
• When images from the computer are saved in the
internal memory of the photo frame, the image files
are saved without being compressed. As a result,
fewer images may be able to be saved to the internal
memory of the photo frame.
• Image files made or edited on a computer may not
be displayed. Image files set to “Read Only” on a
computer cannot be deleted on the photo frame.
Cancel “Read Only” before saving image files from
a computer on the photo frame.
48 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error messages
If an error message appears
If an error occurs, one of the following error messages may be displayed on the LCD screen of the
photo frame. Follow the corresponding solution below to solve the problem.
Error message
Meaning/Solutions
No Memory Stick. / No
CompactFlash card. / No SD
Memory Card. / No xD-Picture
Card.
• A memory card is not inserted in a slot.
Insert a memory card in the corresponding slot.
An incompatible Memory Stick is • An unsupported memory card is inserted. Use a memory
inserted. / An incompatible
card that is supported by the photo frame.
CompactFlash card is inserted. / An
incompatible SD Memory Card is
inserted. / An incompatible xD-
Picture Card is inserted.
No images on file.
• There is no image file that can be displayed on the screen
of the photo frame on the memory card. Use a memory
card containing image files that can be displayed with the
photo frame.
Cannot delete a protected image.
• To delete a protected file, cancel the protection on your
digital camera.
Media is protected. Remove
protection then try again.
• The memory card is write-protected. Slide the write-
The Memory Stick is full. / The
CompactFlash card is full. / The SD
Memory Card is full. / The xD-
Picture Card is full. /The internal
memory is full.
• No more data can be saved because the memory card, or
the internal memory is full. Delete images, or use a
memory card with free space available.
Error reading the Memory Stick. / • In case of a memory card:
Error reading the CompactFlash
card. / Error reading the SD
Memory Card. / Error reading the
xD-Picture Card./Error reading the
iternal memory.
An error has occurred. Check that the memory card is
inserted correctly. If this error message is displayed
frequently, check the status of the memory card with a
device other than the photo frame.
• In case of the internal memory:
Write error in the Memory Stick. /
Write error in the CompactFlash
card. / Write error in the SD
Memory Card. / Write error in the
xD-Picture Card./ Write error in the
internal memory.
Format the internal memory.
Continued
49 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error message
Meaning/Solutions
The Memory Stick is read only.
• A “Memory Stick-ROM” is inserted. To save the images,
use the “Memory Stick” recommended.
The Memory Stick is protected.
Media format not supported.
• A protected “Memory Stick” is inserted. To edit and save
the images, use an external device to remove protection.
• In case of a memory card, use your digital camera or other
device to format the memory card.
• In case of the internal memory, format it with the photo
frame.
Note
When you format the media, all the contained files will be deleted.
Cannot open the image.
• The photo frame cannot display or open an image file
whose format is not supported.
50 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If trouble occurs
Before submitting the photo frame for repair, try using the following guidance to solve the problem.
If the problem persists, consult with your Sony dealer or Sony service facilities.
Power supply
Symptom
The power cannot • Is the power plug inserted
be turned on.
Check item
Cause/Solutions
c Insert the power plug properly.
properly?
Displaying images
If the power is turned on but images are not displayed or the settings of the operation screen cannot
be configured, confirm the following check items.
Symptom
Check item
Cause/Solutions
No images are
displayed on the
screen.
• Is a memory card inserted
properly?
c Insert a memory card properly.
• Does the memory card
c Insert a memory card containing images.
contain images saved with a c Check the file formats that can be
digital camera or other
device?
• Is the file format compatible c A file that is not compatible with DCF
with DCF?
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
Images are not
played back in the
order of shooting
date.
• Were these images saved
from a computer?
• Were these images edited on
a computer?
c The information on the shooting date may
be changed or lost when you edit or save
an image file on a computer.
Continued
51 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
Some images are
not displayed.
• Are the images displayed in c If the image is displayed in the index view
the index view?
but cannot be displayed as single image,
the image file may be damaged even
though its thumbnail preview data is fine.
c A file that is not compatible with DCF
may not be able to be displayed with the
photo frame, even if it can be displayed
with a computer.
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file may not be supported by the
photo frame because, for example, it is a
JPEG file that was created with your
computer. Also, the image file may be
supported, but not contain thumbnail data.
Select the mark and press
to change
the screen to the single image display. If
the mark on the left is displayed again, the
image cannot be displayed because the
image file is not supported by the photo
frame.
• Were the images created
with an application on a
computer?
• Does the mark displayed
below appear in the index
view?
c If the mark shown on the left is displayed,
the image file is supported by the photo
frame, but the thumbnail data or image
itself cannot be opened. Select the mark
and press
. If the mark shown on the
left is displayed again, the image cannot
be displayed.
• Are there more than 4,999
images in the memory card?
c The photo frame can play, save, delete, or
otherwise handle up to 4,999 image files.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the image may not be able to
be displayed on the photo frame.
• Are there five or more levels c The photo frame cannot display images
in the folder hierarchy of the
saved in a folder that is more than five
memory card?
levels deep.
52 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
The file name is
not displayed
properly.
• Did you rename the file with c If you named or renamed the file on your
a computer or other device?
computer and the file name includes
characters other than alphanumeric
characters, the file name may not be able
to be displayed properly on the photo
frame. Also, for a file created on a
computer or other device, a maximum of
ten characters from the beginning of the
file name can be displayed.
Note
Only alphanumeric characters can be displayed.
Blank areas appear • Is the image extremely tall or c If an image is extremely tall or wide,
at the top and
wide?
blank areas may appear because of the
bottom.
ratio between the height and width.
Saving and deleting images
Symptom
Check item
Cause/Solutions
Cannot save an
image.
• Is the memory card write-
protected?
c Cancel write-protection and try saving
again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
[LOCK] position?
• Is the memory card full?
c Replace the memory card with one with
sufficient free space. Or, delete any
• Is the internal memory full? c Delete any unwanted images.
• Did you save images from a c If you do not make a folder, you can only
computer to the internal
memory without making a
folder in the internal
memory?
save up to 512 images. In addition, the
number of images may be reduced
depending on the file name length or
character type. When you save images in
the internal memory from a computer, be
sure to make a folder in the internal
memory and save the images in this
folder.
Continued
53 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check item
Cause/Solutions
Cannot delete an
image.
• Is the memory card write-
protected?
c Use the device you are using to cancel
write-protection and try deleting again.
• Is the write-protect switch of c Slide the write-protect switch to the
the memory card in the
enable position.
[LOCK] position?
• Are you using a “Memory
Stick-ROM”?
c It is not possible to delete an image from
or format a “Memory Stick-ROM”.
• Is this image protected?
c Check the image information from the
c An image with a
mark is set to Read
Only. You cannot delete it on the photo
frame.
An image was
deleted
c An image cannot be recovered once it is
deleted.
—
accidentally.
Photo frame
Symptom
Check item
Cause/Solutions
Nothing happens
even if you operate
the photo frame.
c Push the reset switch on the back of the
photo frame using a long, thin object such
—
c Turn off and then on the power.
Remote control
Symptom
Check item
Cause/Solutions
Nothing happens
even if you operate
the remote control.
remote control properly?
c Insert a battery in the proper orientation.
c Point the top end of the remote control
towards the remote sensor on the photo
—
c Remove any obstruction between the
remote control and the remote sensor.
54 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional information
Precautions
while it is connected to the wall outlet via the
AC adaptor.
• Be sure to use the AC adaptor supplied with
the photo frame. Do not use other AC
adaptors, as this may cause a malfunction.
• Do not use the supplied AC adaptor for other
devices.
• Do not use an electrical transformer (travel
converter), as this may cause overheating or
a malfunction.
On safety
• Be careful not to set or drop any heavy
objects on the power cord, or to damage the
power cord in any way. Never operate this
photo frame with a damaged power cord.
• Should any solid object or liquid fall into the
cabinet, unplug the photo frame and have it
checked by qualified personnel before
operating it any further.
• In case the cord of the AC adaptor is
damaged, do not use it any longer, as this
may be dangerous.
On moisture condensation
• Never disassemble the photo frame.
• To disconnect the power cord, pull it out by
the plug. Never pull the power cord itself.
• When the photo frame is not going to be
used for an extended period of time,
disconnect the power cord from the wall
outlet.
• Do not handle the photo frame roughly.
• To reduce the risk of electrical shock, always
unplug the photo frame from the electrical
outlet before cleaning and servicing the
photo frame.
If the photo frame is brought directly from a
cold location to a warm location or placed in an
extremely warm or humid room, moisture may
condense inside the unit. In such cases the
photo frame will probably not work properly
and may even develop a fault if you persist in
using it. If moisture condensation occurs,
unplug the AC power cord of the photo frame
and do not use the photo frame for at least one
hour.
On transport
When you transport the photo frame, remove
the memory card, AC adaptor, and connected
cables from the photo frame and put the photo
frame and its peripherals in the original box
with the protective packaging.
On installation
• Avoid placing the photo frame in a location
subject to:
– vibration
– humidity
– excessive dust
– direct sunlight
– extremely high or low temperatures
• Do not use electrical equipment near the
photo frame. The photo frame will not work
properly in electromagnetic fields.
• Do not place heavy objects on the photo
frame.
If you no longer have the original box and
packing parts, use similar packing material so
that the photo frame will not be damaged while
being transported.
On cleaning
Clean the photo frame with a soft dry cloth, or a
soft cloth lightly moistened with a mild
detergent solution. Do not use any type of
solvent, such as alcohol or benzine, which may
damage the finish.
On the AC adaptor
• Even if your photo frame is turned off, AC
power (house current) is still supplied to it
Continued
55 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On restrictions on duplication
About memory cards
TV programs, films, video tapes, portraits of
other people, or other materials may be
copyrighted. Unauthorized use of such
materials may infringe the provisions of the
copyright law.
“Memory Stick”
Types of “Memory Stick” that
the photo frame can use
With the photo frame, you can use the
following types of “Memory Stick”*1:
Type of “Memory Displaying
Stick”
Deleting/
Saving
“Memory Stick”*2
(Not compatible
with
OK
OK
“MagicGate”)
“Memory Stick”*2
(Compatible with
“MagicGate”)
OK*5
OK*5
“MagicGate
OK*5
OK*5
OK*5
OK*5
Memory Stick”*2
“Memory Stick
PRO”*2
“Memory Stick
PRO-HG”*2
OK*5*6
OK*5
OK*5*6
OK*5
“Memory Stick
Micro”*3 (“M2”*4)
*1
The photo frame supports FAT32. The photo
frame has been demonstrated as operable with a
“Memory Stick” with a capacity of 16 GB or less
manufactured by Sony Corporation. However, we
do not guarantee the operations of all the “Memory
Stick” media.
*2
The photo frame is equipped with a slot compatible
with both standard-size and Duo-size media.
Without a “Memory Stick Duo” adaptor, you can
use both a standard-size “Memory Stick” and the
compact-size “Memory Stick Duo”.
*3
*4
When using a “Memory Stick Micro” with the
photo frame, always insert it into an M2 adaptor.
“M2” is an abbreviation for “Memory Stick
Micro”. In this section, “M2” is used to describe a
“Memory Stick Micro”.
*5
Data reading/recording that requires “MagicGate”
copyright protection cannot be performed.
“MagicGate” is the general name of a copyright
56 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
protection technology developed by Sony using
authentication and encryption.
SD memory card
*6
The photo frame does not support 8 bit parallel
data transfer.
The SD memory card slot of the photo frame
allows you to use the following:
Notes on use
• SD memory card*1
• Do not insert more than one “Memory Stick”
at the same time, or this may cause trouble
with the photo frame.
• miniSD card, microSD card
(An adaptor is necessary.)*2
• SDHC memory card*3
• MMC standard memory card*4
We do not guarantee proper operations for all
types of SD memory cards and MMC standard
memory cards.
• If you use a “Memory Stick Micro” with the
photo frame, the “Memory Stick Micro”
needs to be inserted into an “M2” adaptor.
• If you insert a “Memory Stick Micro” into
the photo frame without an “M2” adaptor,
you may be unable to remove the “Memory
Stick Micro”.
• If you insert a “Memory Stick Micro” into an
“M2”adaptor, and insert the “M2” adaptor
into a “Memory Stick Duo” adaptor, the
photo frame may not operate properly.
• When you format a “Memory Stick”, use the
format function of your digital camera. If
you format a “Memory Stick” with your
computer, images may not be displayed
properly.
*1
The photo frame has been demonstrated as
operable with an SD memory card with a capacity
of 2 GB or smaller.
*2
Some commercially available card adaptors have
projected terminals on the back. This type of
adaptor may not work properly with the photo
frame.
*3
The photo frame has been demonstrated as
operable with an SDHC memory card with a
capacity of 32 GB or less.
*4
The photo frame has been demonstrated as
operable with an MMC standard memory card with
a capacity of 2 GB or less.
• When you format a “Memory Stick”, all the
data including protected image files will be
erased. To avoid erasing important data by
accident, make sure to check the contents of
the “Memory Stick” before formatting.
• You cannot record, edit, or delete data if you
slide the write-protect switch to LOCK.
• Do not attach any other material than the
supplied label on the labelling position.
When you attach the supplied label, be sure
to attach it to the labelling position. Be
careful that the label does not stick out.
Notes on use
Data reading/recording that requires copyright
protection cannot be performed.
xD-Picture Card
With the xD-Picture Card slot of the photo
frame, you can use an xD-Picture Card*5. Not
all the memory card operations are supported
and we do not guarantee proper operations for
all types of xD-Picture Card.
*5
The photo frame has been demonstrated as
operable with an xD-Picture Card with a
capacity of 2 GB or less.
Continued
57 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Data processed with the computer may not
be displayed with the photo frame.
• When you carry or store a card, put it in the
case supplied with it.
CompactFlash card (DPF-D72
only)
The CompactFlash card slot of the photo frame
allows you to use the following (DPF-D72
only):
• Do not touch the terminal of a card with your
hand or a metal object.
• Do not strike, bend or drop a card.
• Do not disassemble or modify a card.
• Do not expose a card to water.
• Do not use or store a card under the
following conditions:
• CompactFlash Memory Card (Type I/
Type II) and CF+Card (Type I/Type II)-
compatible CompactFlash Card*6
• Microdrive
– Locations beyond the required operational
conditions including locations such as the
hot interior of a car parked in the sun and/
or in the summer, the outdoors exposed to
direct sunlight, or a place near a heater.
– Humid locations or locations with
corrosive substances present
You can also use the Smart Media card by
using a commercially available CompactFlash
card adaptor*7.
However, we do not guarantee proper
operations for all types of CompactFlash cards.
*6
Use a CompactFlash card with a power
specification of 3.3V or 3.3V/5V. You cannot use
a type for 3V or 5V only. Do not insert other types
of CompactFlash card into the photo frame’s
insertion slot. The photo frame may be damaged.
The photo frame has been demonstrated as
operable with a CompactFlash with a capacity of
32 GB or smaller.
– Locations subject to static electricity or
electrical noise
*7
When using a commercially available
CompactFlash card adaptor, refer to the operating
instructions of the adaptor you use for how to
install the card and adaptor. When using a
CompactFlash card adaptor, a write-protected card
may not work properly.
Notes on using a memory card
• When using a card, make sure to check the
correct insertion direction of the card and the
correct insertion slot.
• When inserting the memory card, it will only
insert part of the way, so do not try to force
it, as this could damage the memory card
and/or photo frame.
• Do not remove a card or turn off the photo
frame while the photo frame is reading or
writing data, or the access indicator is
flashing. Otherwise, data may be rendered
unreadable or be erased.
• We recommend that you save a backup of
important data.
58 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
File system
FAT12/16/32,
sector size of 2,048 bytes or smaller
Image file name
Specifications
x Photo frame
LCD screen
DCF format, 128 characters within 5th
hierarchy
LCD panel:
7.0 inches, TFT active matrix
Total number of dots:
DPF-D72: 1,152,000
(800 × 3(RGB) × 480) dots
DPF-A72/E72: 280,800
(480 × 3(RGB) × 234) dots
Maximum number of files that can be
handled
4,999 files for a memory card
Internal memory capacity*4
DPF-D72: 1 GB
(Approx. 2,000 images*5 can be saved.)
DPF-A72/E72: 128 MB
(Approx. 250 images*5 can be saved.)
(When measuring media capacity, 1GB
equals 1 billion bytes, a portion of
which is used for data management.)
Display aspect ratio
DPF-A72/E72/D72: 15:9
Effective display area
DPF-A72/E72: 6.6 inches
DPF-D72: 7.0 inches
Power requirements
LCD backlight life
20,000 hours
DC IN jack, DC 5V
Power consumption
(before brightness of the backlight is
reduced to half)
Model
in operation mode including the
AC adaptor
Input/Output connectors
USB connector (TypeB, Hi-Speed USB)
Slots
DPF-D72
at the maximum load
normal mode*
10.7W
9.0W
7.6W
7.5W
DPF-A72/
E72
at the maximum load
normal mode*
“Memory Stick PRO” (Standard/Duo)/
SD memory card/MMC/
xD-Picture Card slot
CompactFlash card/Microdrive slot
(DPF-D72 only)
* The definition of the normal mode is a status
which allows the performance of a slideshow using
images stored in the internal memory with the
default settings without inserting a memory card or
connecting an external device.
Compatible image file formats
JPEG: DCF 2.0 compatible, Exif 2.21
compatible, JFIF*1
Operating temperature
TIFF: Exif 2.21 compatible
BMP: 1, 4, 8, 16, 24, 32 bit Windows
format
5 °C to 35 °C (41 °F to 95 °F)
RAW (preview only*2): SRF, SR2, ARW
(2.0 or lower version)
(Some image file formats are not
compatible.)
Maximum number of pixels that can be
displayed
8,000 (H) × 6,000 (V) pixels*3
Continued
59 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
aspect ratio is less than 20:1, display problem may
occur in thumbnails, slideshow or other occasions.
Dimensions
[Without the stand]
*4: The capacity is calculated as 1 MB is equivalent to
1,000,000 bytes. The actual capacity is reduced as
files for management and applications are
included. Approximately 942 MB on DPF-D72,
approximately 106 MB on DPF-A72/E72 can be
used for your actual operation.
*5: The numbers of images to be saved are
approximate numbers when images are saved in
Album Image file size. The values may vary
depending on the subjects or shooting conditions.
When saved in the Album Image file size, an
image exceeding 3,140,000 pixels is automatically
resized to an image equivalent to between 780,000
and 3,140,000 pixels. The resizing size cannot be
selected.
DPF-A72/E72/D72:
Approx. 212 × 142 × 39.3 mm
(8 3/8 × 5 5/8 × 1 9/16 inches)
(width/height/depth)
[With the stand spread out]
DPF-A72/E72/D72:
Approx. 212 × 142 × 115.2 mm
(8 3/8 × 5 5/8 × 4 5/8 inches)
(width/height/depth)
Mass
DPF-D72: Approx. 495 g (17 oz)
DPF-A72/E72: Approx. 452 g (15 oz)
(excluding the AC adaptor)
Included accessories
Customer support home page
The latest support information is available at the
following home page address:
x AC adaptor supplied
Power requirements
- 100 V to 240 V, 50/60 Hz
0.3 A
Power consumption
18 W
Rated output voltage
5 V 2 A
Dimensions
Approx. 45 × 72 × 50 mm
(1 3/4 × 2 7/8 × 2 inches)
(width/height/depth)
(excluding the protruding parts)
Mass
Approx. 110 g (3 7/8 oz)
See the label of AC adaptor for more details.
Design and specifications are subject to change
without notice.
*1: Baseline JPEG with 4:4:4, 4:2:2, or 4:2:0 format
*2: RAW files are displayed as thumbnail preview.
*3: 17 bits or more are required both vertically and
horizontally. An image with an aspect ratio of 20:1
or more may not be displayed properly. Even if the
60 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
M
W
Index
CompactFlash card 58
Z
A
Adding to the internal
P
Placing in portrait or
Auto power ON/OFF 42, 45
C
R
Connecting
Replacing the battery of the
Reset 46
D
S
E
F
Format internal memory 46
System Information 46
System requirements
G
General Settings 45
I
Image file size 45
Initialize 46
T
L
Language setting 46
61 GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed using VOC (Volatile
Organic Compound)-free
vegetable oil based ink.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|