Ultimate Sensitivity
Ultra Clear Image 560TVL
Super Vision at Ultra Low Light SHC-745 User’s Manual
Thank you for purchasing a SAMSUNG CCD CAMERA.
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
SALES NETWORK
SAMSUNG TECHWIN CO., LTD.
145-3, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, 462-120, Korea
TEL : +82-31-740-8151~8158 FAX : +82-31-740-8145
•
•
SAMSUNG OPTO-ELECTRONICS UK, LTD.
Samsung House, 1000 Hillswood Drive, Hillswood Business Park Chertsey, Surrey KT16 OPS
TEL : +44-1932-45-5308 FAX : +44-1932-45-5325
P/No. : Z6806085401B
VAN 08. 02
ENGLISH
Download from Www.Somanuals.com. All Manuals Search And Download.
Before operating the camera, confirm the camera model and proper input
power voltage. In order to that you can understand this manual thoroughly,
we'll introduce our model description.
■ SHC-745 SERIES
• NTSC MODELS
SHC-745N
• PAL MODELS
SHC-745P
SHC-745PH
The lightning flash with an arrowhead symbol, within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous voltage”
within the product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
■ MODEL DESCRIPTION
• SHC-745X X
_ _
POWER SOURCE
SIGNAL SYSTEM
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and maintenance (servicing)
instructions in the literature accompanying the appliance.
• SIGNAL SYSTEM
N --> NTSC MODEL
P --> PAL MODEL
INFORMATION-This equipment has been tested and found to comply with limits
for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio
communications.
• POWER SOURCE
--> DC12V/AC24V
H
--> AC 230V~
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at
his own expense.
WARNING : Changes or modifications not expressly approved by the manufacturer
could void the user’s authority to operate the equipment.
WARNING : To prevent electric shock and risk of fire hazards:
Do NOT use power sources other than that specified.
Do NOT expose this appliance to rain or moisture.
This installation should be made by a qualified service person and
should conform to all local codes.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
22
6
8
How to Use the Camera
Function Menu Structure
How to Set up the Functions
LENS
Features
22
23
Precautions
24
26
28
29
31
32
34
36
41
10
11
Components and Accessories
Overview
Front View
Side View
EXPOSURE
WHITE BALANCE
BACKLIGHT
SSNR
DAY/NIGHT
IMAGE ADJ
SPECIAL
EXIT
11
12
13
14
Bottom View
Rear View
15
15
Installation Procedures
Lens
• When Using Auto Iris Lens
• When Using C/CS Mount Lens
Connecting a Monitor
Connecting Power
42
44
Troubleshooting
Specifications
19
20
21
Control via RS-485 Interface
Download from Www.Somanuals.com. All Manuals Search And Download.
Samsung Techwin cares for the environment at all product manufacturing
stages to preserve the environment, and is taking a number of steps to
provide customers with more environment-friendly products.The Eco mark
represents Samsung Techwin s will to create environment-friendly products,
and indicates that the product satisfies the EU RoHS Directive.
Features
Motion Detection
Ultra High Resolution
Since the camera detects motion and generates
signals without any additional external sensors, you
can monitor activity more efficiently by connecting the
camera to an alarm device.
By adopting a diagonal 8mm(1/3 ) 410,000 pixel
ExView Sony CCD, the camera produces clear picture
quality with a horizontal resolution of 560 TV lines for
color, and 700 TV lines for B/W.
Warnings & Cautions
This information is provided to ensure your safety and to prevent any losses, financial
or otherwise. Please read it carefully and use the product accordingly.
BLC
DIS (Digital Image Stabilizer)
* For product inquiries, please contact the retail shop where you bought the camera. The use of equipment such
as an aerial ladder while providing after-sales service shall be at your expense.
* Separate the power plug when thunder crashes or lighting flashes.
* This product is support equipment for surveillance system. Therefore, we can't compensate for material loss
and/or personal injuries by robbery, fire, natural disaster or something like this type.
By adopting
a
proprietary SV-IV DSP chip, the camera
The DIS function compensates for any camera
movement, to produce more stable pictures.
delivers clear, high quality pictures even in backlight, by
increasing exposure in dark areas while decreasing it in
bright areas; a corrected image with clear details results.
Video/DC Drive Lens Support
Excellent Sensitivity
You can select Video or DC Drive Lens from the menu.
Warning/Attention/Special Mark Messages
By adopting a diagonal 8mm(1/3 ) highly senstive CCD, and
digital signal processing technology, it can clearly
distinguish the outline and color of
a
subject in an
Ignoring this information may
Ignoring this information may
result in material loss and/or
result in material loss and/or a
serious personal injuries including
slight injuries.
Miscellaneous Functions
extremely low luminance environment – even, for example,
under starlight. Since surveillance is possible in places
where the light is poor, the camera is appropriate for day and
night surveillance outdoors or on the outside of buildings.
HLC(High Light Compensation), SYNC (INT/LL),
SENS-UP, FREEZE, FLIP (H/V-REV), D-ZOOM,
SHARPNESS, MOTION DETECTION and PRIVACY
functions are provided.
death.
-
0.05 Lux(Color) / 0.00019 Lux(Color Sens-Up Mode)
- 0.006 Lux(B/W)
Indicates “Never Allowed.”
Indicates “No Disassembling.”
SSNR (Samsung Super Noise
Reduction) Function
RS-485 Communication
Control Support
The high performance SV-IV DSP chip dramatically reduces
the gain noise in digital image processing, producing clear,
sharp images in low lighting environments.
Remote OSD menu control via an RS-485 interface is
supported.
Day & Night
OSD
The camera identifies whether it is day or night and
automatically switches to the appropriate mode, depending
on its environment. By day, the camera switches to color
mode in order to maintain optimal color. At night, it switches
to B/W mode so as to obtain better picture definition.
The camera control is convenient by using 7 different
foreign language O.S.D.
- NTSC : English, Spanish, Japanese
- PAL : Korean, English, French, German, Spanish,
Italian, Chinese
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
6
7
Precautions
Do not install under extreme
temperature conditions.
Do not install in high humidity
environment.
Do not drop the camera or
subject it to physical shock.
Never keep the camera face to
strong light directly.
Use only under temperature conditions
between -10˚C and +50˚C. Provide good
ventilation when using in high temperature
conditions.
May lower image quality.
May cause a product malfunction.
May damage the CCD.
Do not expose the camera to
rain or other types of liquids.
Do not expose the camera to
radioactivity.
Do not install under unstable
lighting conditions.
Avoid touching the camera lens.
Wipe dry any liquids. Liquids may contain
minerals that are corrosive to electronic
components.
Radioactivity exposure may damage the
CCD.
Notes
• Exposure to a spotlight or an object emitting strong light may cause smear or
blooming.
• Ensure that the power source complies with normal specifications before
supplying it to the camera.
Severe lighting changes or flickering may
hinder normal camera operation.
The lens is the most important component
of the camera. Be careful not to smear it
with fingerprints.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
8
9
Components and Accessories
Overview
Front View
1. Ultra Low Light
Color CCD Camera SHC-745
2. Auto Iris Lens Connector Plug
3. C-Mount Adapter
Tripod Mounting Bracket Screw Hole
Used to fix the Tripod Mounting Bracket to the top of the camera.
C-Mount Lens Adapter
Install this adapter to use a C-Mount Lens.
Back Focus Control Lever
Adjust focus by this Back Focus Lever.
4. Instruction Manual
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
10
11
Overview
Bottom View
Side View
Auto Iris Lens Connector
Used to connect Auto Iris Lens plug.
Tripod Mounting Bracket Screw Hole
Used to fix the camera on a bracket or tripod.
The screw sizes for this hole are as follows:
L
1/4"-20 UNC (20 THREAD)
L:4.5mm 0.2mm (ISO standard),
or 0.197" (ASA standard)
You can separate the Tripod Mounting Bracket and
install it on the top or bottom of the camera.
Make sure to use the Tripod Mounting Bracket when
fixing the camera to a bracket or tripod. Otherwise the
camera may not be secure, or the internal circuitry of
the camera may be damaged.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
13
12
Overview
Installation Procedures
Lens
Rear View
The lens is not supplied with this camera. Purchase a lens suitable for your
environment. This camera accepts the auto iris lens and both C-and CS-mount lens.
Notes
• It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major
functions of this camera.
• Keep the lens surface clean, since if it is contaminated with dirt or fingerprints the
picture quality suffers.
*High Voltage Type
(SHC-745PH)
When Using Auto Iris Lens
Function Setup Button
1. Strip the insulation of the auto iris lens cable 8mm from the end.
SET Button : Displays the menu on the screen. Press this button to confirm
status or after changing a selected item.
approx. 8mm
Up and Down Button : Used to move the cursor up or down in the menu
screen to select a desired menu item.
Left and Right Button : Used to move the cursor left or right in the menu
screen or to change the value of the selected item.
D & N Input Port
You can switch to Day & Night Mode by connecting an external signal to this port.
MD Output Port
Motion detection signals are output through this port.
RS-485 Control Port
2. Strip the insulation of the core of the auto iris lens cable to expose a 2mm length.
approx. 2mm
You can control SETUP MENU through this port by using external controllers like a
Remote controller that RS-485 Communication is supported. For details, see page 21.
Video OUT Port
Video signals are output through this port. Connect this port to the Video IN port of a monitor.
Power LED
When power is properly connected, this LED comes on.
Power IN Port
Connect the power as specified for each model here.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
15
14
Installation Procedures
3. Remove the cover of the auto iris lens connector plug and solder the lens cable to
the connector pin of the plug.
When Using C/CS Mount Lens
Before installing a lens, identify whether the lens to be installed is a C-Mount or CS-Mount.
This camera is set for a CS-Mount Lens by default. To install a C-Mount Lens, a
simple modification is required.
• For a Video Drive Lens
Pin 1: Red (Power)
Pin 2: NC
Pin 3: White (Video Signal)
Pin 4: Black (Ground)
• For a DC Drive Lens
Pin 1: Damping -
Pin 2: Damping +
Pin 3: Drive +
• When Using a CS Mount Lens
Pin 4: Drive -
Remove the protective glass cover at the front of this product and turn the CS-
Mount Lens clockwise to install it. And set focus of camera using Back Focus
Control Lever of camera side after combining CS-Mount lens.
Lens cable
connector
No. 3 Pin
No. 1 Pin
No. 4 Pin
No. 2 Pin
Notes
4. Fit the cover of the auto iris lens connector
plug, remove the protective glass cover
from the front of the camera, and fasten
the auto iris lens by turning it clockwise.
• Use the lens connector shown in the following figure. If the dimensions of the
connector are not correct, it may damage the camera, or the lens may not be
installed firmly.
C-Mount Lens: 10mm or less
CS-Mount Lens: 5mm or less
5. Set focus of camera using Back Focus Control
Lever of camera side after combining Auto
Iris lens.
• If the lens is too heavy, the camera becomes unbalanced and there may be
problems. Use a lens that weighs less than 450g.
• When adjusting the Automatic Level Control (ALC) of an auto iris lens, use Av
mode if available. If you use the Pk mode, the picture brightness may change
continuously.
Back Focus Control Lever
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
17
16
Installation Procedures
• When Using a C Mount Lens
1. Remove the protective glass cover at the front of this product and turn the C-
Mount Adapter clockwise to install it.
Connecting a Monitor
Connect the Video OUT port on the rear panel of the camera to a monitor.
CCD Camera
Monitor
• Since the connection procedure may differ depending on the type of monitor or
peripheral device to be connected, refer to the User Manual for the device to be
connected.
2. Turn the C-Mount lens clockwise to install it.
• Make sure to turn off the device to be connected before making any connections.
• Turn the 75 /Hi-Z switches of interim display devices to the Hi-Z position, and
the switches of any final device to the 75Ω position.
Intermediate
End monitor
3. Set focus of camera using Back Focus Control Lever of camera side after combining
C-Mount lens.
CCD Camera
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
19
18
Installation Procedures
Connecting Power
Control via RS-485 Interface
Since power specifications differ depending on the model, make sure to check your
model name and specifications before connecting power.
The camera can be controlled by using external controllers like a Remote controller.
(RS-485 Communication)
You can connect power as shown in the following figure.
(1) To control by PC
Connect the RS-485 control port of the camera and the serial cable through an
RS-485 converter.
Example) PC Serial Port (COM1) Serial Cable RS-485 Converter Camera
RS-485 Control Port
For AC / DC power
• Since the power specification supports
both AC and DC, connect AC 24V,
500mA Adaptor or DC 12V, 500mA
Adaptor.
(2) To control using a DVR or System Controller
Connect the RS-485 cable (TRX+, TRX-) to the connection port of the 485 control
board that is connected to the DVR or System Controller.
485 Control Board Connection Port
(+) CONNECTION TERMINAL (TRX+)
(-)CONNECTION TERMINAL (TRX-)
RS-485 Control Port
485+
485-
High Voltage Type (AC230V, 50Hz)
* RS-485 Communication establishment initial value
• Use AC230V, 50Hz power source For
SHC-745PH.
Camera ID
1
BAUD RATE
9600
UART MODE
8-NONE-1
RET PKT
ENABLE
Item
Initial value
Notes
• To control the camera by constructing an additional controller, use Pelco-D
protocol or STW protocol (Samsung Techwin protocol).
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size(AWG) #24(0.22mm2) #22(0.33mm2) #20(0.52mm2)
#18(0.83mm2)
0.018
Resistance value(Ω/m)
0.078
0.028
0.050
0.018
0.030
0.011
Voltage drop(V/m)
0.006
• As shown in the table above, voltage decreases as the wire gets longer.
Therefore use of an excessively long adaptor output line for connection to the
camera may affect the performance of the camera.
Standard voltage for camera operation : DC 12V 10%, AC 24V 10%
There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
21
20
How to Use the Camera
Function Menu Structure
How to Set up the Functions
You can set up functions using the 5 buttons on the rear of the camera.
Setup Menu
LENS
• DC
• VIDEO
• MANUAL
• SENS-UP
UP button
SET button
EXPOSURE
• SHUTTER • AGC
• RETURN
LEFT button
DOWN button
RIGHT button
WHITE BALANCE
• ATW
• MANUAL
• AWC SET
• HLC
• OUTDOOR • INDOOR
BACKLIGHT
SSNR
• OFF
• BLC
• OFF
• B/W
• ON
1. Press the SET button.
• Main setup menu is displayed on the monitor screen.
DAY/NIGHT
• COLOR
• EXTERN
• FREEZ
• AUTO
MAIN SETUP
IMAGE ADJUSTMENT
(IMAGE ADJ.)
• V-REV
• H-REV
1.LENS
DC
• D-ZOOM • SHARPNESS
• RETURN
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
SPECIAL
• CAMTITLE • SYNC
• PRIVACY • DIS
• LANGUAGE • RESET
• MOTION DET
• COMM ADJ
• RETURN
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
EXIT
2. Select a desired function using the Up and Down buttons.
• Place the cursor over a desired item.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
23
22
How to Use the Camera
DC/Video : Select Auto Iris Lens
MAIN SETUP
Change the status using
the LEFT or RIGHT button.
Select the function using
the UP or DOWN button.
1.LENS
DC
• When DC is selected, you can control screen brightness. The range of
brightness control is between 1 and 70. Adjust the brightness appropriately
for optimal screen brightness.
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
3. Set up a selected item by using the Left and Right buttons.
4. To finish the setting, select ‘EXIT’ and press the SET button.
Notes
Notes
• Some lenses may not work properly, depending on the setting of the
BRIGHTNESS LEVEL.
• When Using a Video-Type Auto Iris Lens
• An item with the
item with the icon and press the SET button.
• An item with the - - - icon is unavailable due to function settings.
icon also has sub menus. To select a sub menu, select an
Adjust the ALC adjustment terminal on the lens appropriately. In general, set
it to AV (Average).
It may not work properly depending on the installed lens. Set the Level VR of
the lens to the optimal value.
Set AGC to OFF and adjust the Lens VR to an appropriate brightness.
Adjust the Lens VR, adjust the BRIGHTNESS, and then check if the screen
brightness changes properly. Otherwise, adjust the Lens VR again.
LENS
Using this function, you can control screen brightness.
1. When the SETUP menu screen is displayed, select LENS by using the Up and
Down buttons so that the arrow indicates LENS .
Manual : Select Manual Lens
2. Select the connected lens type by using the Left and Right buttons.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
ATW
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
25
24
How to Use the Camera
Notes
EXPOSURE
• When the SHUTTER is set to ESC after selecting the Internal Synchronization
Type, the picture may become unstable if the camera faces a bright fluorescent
light. Therefore, take care when choosing the installation position.
• ESC and MANUAL modes are only available together when the lens is set to
MANUAL.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
• When the SHUTTER is set to MANUAL or A.FLK mode, SENS-UP will be disabled.
AGC (AUTO GAIN CONTROL):
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
1. When the SETUP menu screen is displayed, select EXPOSURE by using the Up
and Down buttons so that the arrow indicates EXPOSURE .
2. Select a desired mode using the Up and Down buttons.
SENS-UP :
When it is night or dark, the camera
automatically detects the light level and
maintains a clear picture if this mode is
activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
Notes
SHUTTER : You can select either auto or manual shutter.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
• If you press the SET button in ‘AUTO’ mode, You can adjust brightness by
increasing or decreasing the shutter speed. (X2~X256)
• Note that the higher the zoom level, the brighter the screen, but the more likely it
is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the zoom level is increased, this is normal.
- MANUAL : You can control shutter speed manually.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
27
26
How to Use the Camera
Notes
White Balance (White Bal.)
• White Balance may not work properly under the following conditions. In this case
select the AWC mode.
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Up
and Down buttons so that the arrow indicates ‘White Bal.’ .
When the color temperature of environment surrounding the subject is out of the
control range (e.g. clear sky, or sunset)
When the ambient illumination of the subject is dim.
2. Select a desired mode using the Up and Down buttons.
If the camera is directed towards a fluorescent light or is installed in a place
where illumination changes dramatically, the White Balance operation may
become unstable.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
BACKLIGHT
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.
1. When the SETUP menu screen is displayed, select ‘BACKLIGHT’ by using the Up
and Down buttons so that the arrow indicates BACKLIGHT .
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1800˚K and 10500˚K
INDOOR : Select this when the color temperature is between 4500˚K and 8500˚K.
OUTDOOR : Select this when the color temperature is between 1800˚K and
10500˚K. (sodium light inclusion)
MAIN SETUP
AWC SET : To find the optimal setting for the current luminance environment in
this mode, set the point the camera towards a sheet of white paper
and press the SET button. If the environment changes, readjust it.
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
MANUAL : Select this to fine-tune White Balance manually. Set White Balance
first by using the ATW or AWC mode. After that switch to MANUAL
mode, fine-tune the White Balance and then press the SET button.
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
28
29
How to Use the Camera
BLC : Enables a user to directly select a desired area from a picture, and to view
the area more clearly.
HLC : Enable a user to select a mask color of
high light area from a picture.
Notes
• Because there can be a difference in the effectiveness of HLC according to the
amount of light area in the screen, optimize the installation angle for the best HLC
performance.
• In a dark environment, the HLC is only activated when a high light that is larger
than a certain area is present.
BLC ON
BLC OFF
HLC (High Light Compensation) :
If there is a high light installed in a limited environment such as an apartment
parking garage or gas station entrance, removing the high light makes it possible
to view car license plates efficiently.
• The HLC is not activated in light or overly dark conditions.
- DAY : In normal daylight conditions, the HLC is not activated.
- NIGHT : If a high light that is larger than a certain size is present on the
screen, remove the high light to see license plates clearly.
SSNR
HLC MASKING AREA
This function reduces the background noise in a low luminance environment.
1. When the SETUP menu screen is displayed, select ’SSNR’ by using the Up and
Down buttons so that the arrow indicates ’SSNR’ .
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
HLC ON
HLC OFF
ATW
OFF
ON
OFF : Not being used
3. Select a desired mode using the Left and Right
buttons and press the SET button.
6.DAY/NIGHT
AUTO
Select ‘BLC’ to adjust the area to be enhanced
and enhancement level.
2. Select a desired mode using the Left and Right buttons.
OFF : Deactivates SSNR. Noise is not reduced.
ON : Activates SSNR so that noise is reduced.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
31
30
How to Use the Camera
3. Set the SSNR mode to ‘ON’ and press the SET button. Then you can adjust the
noise reduction level.
2. Select a desired mode using the Left and Right buttons according to the picture
display you want.
COLOR : The picture is always displayed in color.
B/W : The picture is always displayed in black and white.
AUTO : The mode is switched to Color in a
normal environment, but switches to
B/W mode when ambient illumination
is low. To set up the sswitching time or
speed for AUTO mode, press the SET
button.
Notes
• You cannot set the SSNR to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE
menu is ‘OFF’.
- DWELL TIME : You can select the duration time about changing the day/night
mode.
5s, 7s, 10s, 15s, 20s, 30s, 40, 60s
• When adjusting the noise reduction level of the SSNR mode, remember that the
higher the level set, the more the noise level will be reduced but that after image
may also occur.
- DURATION : You can select brightness of illumination about changing the
day/night mode.
Color B/W
2.5 lux
0.8 lux
B/W Color
4 lux
6 lux
Fast
Slow
* The brightness of illumination is changeable
by installed environment.
DAY/NIGHT
EXTERN : This mode allows you to apply a desired filter to external signals.
You can display pictures in color or black and white.
1. When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by using the Up
and Down buttons so that the arrow indicates DAY/NIGHT .
Notes
• When using a Video Auto Iris Lens, if you set the lens level to low, automatic
switching between Color and Black & White may not occur.
You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’.
At this time, the exchange between DAY mode and NIGHT mode operates as like
selecting ‘COLOR’ mode.
• The OSD key does not work for 3 seconds when switching to Color or B/W, to
ensure stable camera operation.
The camera may focus less well under infrared illumination than under normal illumination.
MAIN SETUP
•
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
•
• Since the camera may not focus as well under infrared illumination at night as it
does under normal illumination, install an Extra-low Dispersion Lens to obtain
sharp pictures.
6.DAY/NIGHT
7.IMAGE ADJ
AUTO
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
33
32
How to Use the Camera
D-ZOOM : You can use a digital zoom of x1~x10.
IMAGE ADJ.
1. When the SETUP menu screen is displayed, select ‘IMAGE ADJ.’ by using the Up
and Down buttons so that the arrow indicates IMAGE ADJ.
MAIN SETUP
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
ATW
OFF
ON
SHARPNESS : As you increase this value, the picture outline becomes stronger
and clearer. Adjust this value appropriately depending on the
sharpness of the picture.
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
2. Select a desired mode using the Up and Down buttons.
IMAGE SETUP
1. FREEZE
2. V-REV
OFF
OFF
OFF
OFF
ON
RETURN : Select this to save the settings for the IMAGE ADJ. menu and to
return to the SETUP menu.
3. H-REV
Notes
4. D-ZOOM
5. SHARPNESS
6. RETURN
• When H-REV or V-REV is selected, any text in the picture also will be flipped
horizontally or vertically.
• If you increase the SHARPNESS level too high, the picture may become distorted
or noise may appear.
FREEZE : You can view still or moving pictures.
V-REV : You can flip the picture vertically on the screen.
H-REV : You can flip the picture horizontally on the screen.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
35
34
How to Use the Camera
Set it to ‘ON’ by using the Left and Right buttons.
SPECIAL
Notes
1. When the SETUP menu screen is displayed, select ‘SPECIAL’ by using the Up and
Down buttons so that the arrow indicates ‘SPECIAL’.
• When the CAM TITLE menu is ‘OFF’, no
title will be displayed on the monitor
screen even if you enter one.
SPECIAL
1. CAM TITLE
OFF
INT
OFF
OFF
OFF
2. SYNC
MAIN SETUP
3. MOTION DET
4. PRIVACY
5. DIS
1.LENS
DC
2.EXPOSURE
3.WHITE BAL
4.BACKLIGHT
5.SSNR
6. COMM ADJ
7. LANGUAGE
8. RESET
ATW
OFF
ON
ENGLISH
9. RETURN
6.DAY/NIGHT
7.IMAGE ADJ
8.SPECIAL
9.EXIT
AUTO
Press the SET button.
Camera ID
ABCDEFGHIJKLM
NOPQRSTUVWXYZ
abcdefghijklm
nopqrstuvwxyz
- . 12 3 4 5 6 7 8 9
2. Select a desired mode using the Up and Down buttons.
SPECIAL
1. CAM TITLE
2. SYNC
OFF
INT
OFF
OFF
OFF
CLR POS END
3. MOTION DET
4. PRIVACY
5. DIS
Use the 4 direction buttons to move to a desired letter and select the letter by
pressing the SET button. Repeat this to enter multiple letters.
You can enter up to 15 letters.
6. COMM ADJ
7. LANGUAGE
8. RESET
ENGLISH
Notes
9. RETURN
• If you move the cursor to CLR and press the SET button, all the letters are
deleted. To edit a letter, change the cursor to the bottom left arrow and press the
SET button. Move the cursor over the letter to be edited, move the cursor to the
letter to be inserted and then press the SET button.
CAM TITLE : If you enter a title, the title will appear on the monitor.
If the SPECIAL menu screen is displayed, use the Up and Down buttons so
that the arrow indicates ‘CAM TITLE’.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
37
36
How to Use the Camera
Enter a title, move the cursor to ’POS’ and
press the SET button. The entered title
appears on the screen. Select the position to
display the title on the screen by using the 4
direction buttons and press the SET button.
When the position is determined, select
’END’ and press the SET button to return to
the SPECIAL menu.
When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates MOTION DET .
Set up the mode using the 4 direction buttons.
FRONT DOOR
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is high,
motion detection sensitivity is increased to recognize even small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL SET : Fills in a selected MD area. Fills in a selected MD area. The color of filling is
sequentially selected as brown, orange, blue, cyan, yellowish green, yellow
and red.
to Locate, then SET
SYNC : In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL
menu.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
• Press the SET button.
• You can select a desired phase from 0 to 359 when select 'phase'.
• You can decide the synchronization between luminance and color signal when
select the 'mode'.
Notes
•
MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the
monitor screen.
PRIVACY : Hide an area you want to hide on the
screen.
Notes
When the SPECIAL menu screen is displayed,
press the Up and Down buttons so that the
arrow indicates ‘PRIVACY’.
•
When using AC power at 60Hz frequency, you can use the L/L type synchronization.
• When the power is DC 12V, the SYNC. menu is fixed to the ‘INT’ mode.
Set up the mode using the 4 direction buttons.
MOTION DET:
- AREA SEL : You can select up to 8 MD areas.
- AREA MODE :
Determines whether to use the area selected in
the AREA SEL, and the size and position of the
area.
If you connect an alarm device to this camera, you
can monitor activity more efficiently, because a
signal is generated by the camera whenever
motion is detected. The motion detection signal is
output through the MD OUT port.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
39
38
How to Use the Camera
- MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue, Black,
- DISP CAM ID : Display camera title on top left corner of the screen.
White.
LANGUAGE : You can select the menu language according to your requirements.
RESET : Resets the camera settings to the factory defaults.
- TRANSP : Determine the transparency of selected area as controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
RETURN : Select this to save the SPECIAL menu settings and return to the SPECIAL
menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
Notes
EXIT
•
•
•
The chance of resolution decrease is existed because DIS function uses the digital zoom.
DIS doesn’t operate when background illumination is too low.
Press the SET button in the EXIT menu to save the current settings and exit the SET menu.
DIS doesn’t operate when object pattern is monotonic as like sky or white wall.
COMM ADJ (Communication Adjustment) :
This function sets up the camera communication status when controlling the
camera through an external control device.
When the SPECIAL menu screen is displayed, press the Up and Down buttons
so that the arrow indicates ‘COMM ADJ’.
Set up the mode using the 4 direction buttons.
- CAM ID : Determines the camera's identification number (between 0 and 25).
- BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE : You can select NONE, EVEN or ODD for the parity bits.
- RET PKT : Determines whether to send a command back to the controller device
when a communication control command is sent to the camera.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
41
40
Troubleshooting
If you have trouble operating your camera, refer to the following table.
If the guidelines do not enable you to solve the problem, contact an authorized
technician.
Problem
Solution
The Motion Detection
function does not
work.
• Check that MOTION DEF of SPECIAL SETUP menu
is ‘OFF’.
Problem
Solution
Nothing appears on
the screen.
• Check that the power cord and line connection
between the camera and monitor are fixed properly.
• Check that you have properly connected VIDEO
cable to the camera VIDEO output jack.
Color is not correct.
• Check the setting of WHITE BAL SETUP menu .
The screen flickers
continually.
• Check that direction of camera turns toward the
Sun.
• Check that the lens type is VIDEO lens or DC lens.
RS-485
communication fails.
• Check the polarity between RS-485 Control Port
and RS-485 cable.
The image on the
screen is dim.
• Is lens stained with dirt? Clean your lens with soft,
clean cloth.
• Set the monitor to proper condition.
• If the camera is exposed to too strong light, change
the camera position.
485 Control Board Connection Port
(+) CONNECTION TERMINAL (TRX+)
(- ) CONNECTION TERMINAL (TRX-)
RS-485 Control Port
485+
485-
• Check the RS-485 Communication establishment
initial value
The image on the
screen is dark.
• Adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω / Hi-z
properly.
* RS-485 Communication establishment initial value
Item
Initial value
Camera ID
1
BAUD RATE UART MODE
9600 8-NONE-1
RET PKT
ENABLE
The camera is not working
properly, and the surface
of the camera is hot.
• Check that you have properly connected the camera
to an appropriate power source.
• We recommend that you make ground connect
between camera and controller in order to maintain
safety communication control.
• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.
The DAY/NIGHT menu
does not work.
• Check that AGC of EXPOSURE SETUP menu is
‘OFF’.
• Check that SHUTTER of EXPOSURE SETUP menu is
‘A.FLK’ or ‘MANUAL’.
The SENS-UP function
does not work.
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And CDOLoOwR CnCDloCAaMdER.A
User’s Manual
43
42
DECLARATION OF CONFORMITY
Specifications
Application of Council Directive(s)
89 / 336 / EEC
SHC-745N
SHC-745P
SHC-745PH
Manufacturer's Name
SAMSUNG TECHWIN CO., LTD
SAMSUNG TECHWIN CO., LTD
42, SUNGJU-DONG CHANGWON-CITY,
KYUNGNAM, KOREA, 641-716
Input Voltage
Power Consumption
Size
AC24V / DC12V
AC230V
POWER
CCD
4.0W
Diagonal 8mm (1/2 ) Sony Exview HAD CCD
811(H) X 508(V)
Manufacturer's Address
Total Pixels
Effective Pixels
Scanning System
Synchronization
768(H) X 494(V)
2:1 Interlace
Internal / Line Lock
Sync
European Representative Name
European Representative Address
Equipment Type/Environment
Model Name
Horizontal : 15.734 KHz,
Vertical : 59.94 Hz
Frequency
Horizontal : 15.625 KHz, Vertical : 50.00 Hz
English, French, Germany, Spanish,
Italy, Chinese
BLC/HLC/OFF
O.S.D
Korean, English, Japanese, Spanish
CCTV Camera
Back-light Comp.
Resolution
Color : 560 TV Lines
B/W : 700 TV Lines
SHC-745
S/N (Y signal)
Min. Illumination
White Balance
Electronic Shutter
Speed
Sens-up
Gain Control
SSNR
52 dB (AGC Off, Weight ON)
0.05 Lux (Color), 0.00019 Lux (Color Sens-Up Mode), 0.006 Lux (B/W)
ATW / AWC / Manual / Outdoor / Indoor (1800˚K ~10,500˚K)
Beginning Serial NO.
S7090001
Year of Manufacture
2008. 02. 01
1/60 ~ 1/120,000 sec
1/50 ~ 1/120,000 sec
E
L
Conformance to
EN 50081-1 : 1992
EMC-Directive 89/336 EEC and 92/31/EEC
EN 50130-4 : 1996
AUTO / OFF (Selectable x2 ~ x256)
E
C
T
R
I
C
A
L
LOW / HIGH / OFF
ON / OFF (1~32 Level)
Motion Detection
PRIVACY
V-REV
ON / OFF (8 Zone, ALARM Output)
ON/OFF (8 Zone)
ON / OFF
ON / OFF
H-REV
FREEZE
ON / OFF
SHARPNESS
IRIS Control
Day & Night
DIS
Digital Zoom
Blemish Compensation
ON/OFF (Level Adjustable)
DC / Video
COLOR / Black& White/AUTO/EXT
ON / OFF
We, the undersigned, hereby declare that the equipment specified above conforms
to the above Directive(s).
ON / OFF (x10)
256 point (Even 128 Point, Odd 128 Point)
RS-485 (2400, 4800, 9600, 19200, 38400, 57600 bps selectable)
(STW Protocol, Pelco-D Protocol available)
CS Mount (Easy Focus type)
(C Mount is mountable by using adaptor)
Manual
Manufacturer SAMSUNG TECHWIN CO., LTD
Signature
Legal Representative in Europe
Communication
Lens Mount
Signature
Full Name
Position
Place
Full Name
Position
Place
HAN SEUG KIM
Back Focus Adjustment
Operating temperature / Humidity
Storing Temperature / Humidity
Dimension(mm)
QUALITY CONTROL MANAGER
CHANGWON, KOREA
2008. 02. 01
-10˚C to +50˚C / 30% to 80% RH
-20˚C to +60˚C / 20% to 90% RH
65.8(W)X60.6(H)X101.9(D)
315g
65.8(W)X60.6(H)X115(D)
535g
Weight
Date
Date
COLOR CCD CAMERA
UsDero’s wMannulaol ad from Www.Somanuals.com. All Manuals Search And Download.
44
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
|