3-084-916-E2 (1) GB
DVD Player/
Video Cassette
Recorder
Operating Instructions
PAL SECAM
SLV-D950B
SLV-D910B
© 2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
To prevent fire or shock
hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock,
do not open the cabinet.
Refer servicing to qualified
personnel only.
Mains lead must only be
changed at a qualified
service shop.
Compatible colour
systems
Precautions
Safety
•
This VCR is designed to
record using the PAL (B/G)
and SECAM colour systems
and play back using the PAL
(B/G) and SECAM colour
systems. Recording of video
sources based on other colour
systems cannot be
•
This unit operates on 220 –
240 V AC, 50 Hz. Check
that the unit’s operating
voltage is identical with your
local power supply.
•
•
To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the apparatus.
The unit is not disconnected
from the AC power source
(mains) as long as it is
guaranteed.
•
Tapes recorded with the
MESECAM colour system
can be played back on this
VCR using a TV or a colour
monitor supporting the
SECAM colour system.
connected to the wall outlet,
even if the unit itself has been
turned off.
This appliance is classified as a
CLASS 1 LASER product. The
CLASS 1 LASER PRODUCT
MARKING is located on the
rear exterior.
Installing
SHOWVIEW is a registered
trademark of Gemstar
Development Corporation. The
SHOWVIEW system is
manufactured under license from
Gemstar Development
Corporation.
•
Do not install the unit in a
confined space such as a
book or similar unit.
•
Do not install the unit in an
inclined position. It is
CAUTION
designed to be operated in a
horizontal position only.
Keep the unit and discs away
from equipment with strong
magnets, such as microwave
ovens, or large loudspeakers.
Do not place heavy objects
on the unit.
Do not place the unit on
surfaces (rugs, blankets, etc.)
or near materials (curtains,
draperies) that may block the
ventilation slots.
The use of optical instruments
with this product will increase
eye hazard. As the laser beam
used in this DVD player/Video
Cassette Recorder is harmful to
eyes, do not attempt to
disassemble the cabinet.
Refer servicing to qualified
personnel only.
•
•
•
2
WARNING
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome!
Caution
Thank you for purchasing this
Sony DVD Player/Video
Cassette Recorder. Before
operating this player, please
read this manual thoroughly
and retain it for future
reference.
For use of the VCR
Televisionprogrammes,films,
video tapes and other
materials may be copyrighted.
Unauthorized recording of
such material may be contrary
to the provisions of the
copyright laws. Also, use of
this recorder with cable
television transmission may
require authorization from the
cable television transmitter
and/or programme owner.
For use of the DVD
player
This product incorporates
copyright protection
technology that is protected by
method claims of certain U.S.
patents, other intellectual
property rights owned by
Macrovision Corporation, and
other rights owners. Use of
this copyright protection
technology must be authorized
by Macrovision Corporation,
and is intended for home and
other limited viewing uses
only unless otherwise
authorized by Macrovision
Corporation. Reverse
engineering or disassembly is
prohibited.
Welcome! 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
WARNING
Welcome!
Caution
About this manual
This player can play the following discs
Notes about discs
8 Step 1 : Unpacking
9 Step 2 : Setting up the remote commander
11 Step 3 : Connecting the DVD-VCR
13 Step 4 : Setting up the DVD-VCR with the Auto Set Up function
15 Step 5 : Selecting a language
16 Step 6 : Setting the clock
18 Step 7 : Presetting channels
27 Setting the Canal Plus decoder
31 Playing discs
59 A/V Receiver hookup
35 Guide to the on-screen display
37 Playing a tape
61 S-Video hookup
40 Recording TV programmes
DVD Settings and
Adjustments
44 Recording TV programmes using the
ShowView® system (SLV-D950B
only)
62 Audio Setup
65 Screen Setup
68 Setting the display or sound track
48 Recording TV programmes using the
timer
language
52 Recording TV programmes using
DIAL TIMER (SLV-D950B only)
56 Checking/changing/cancelling timer
70 Parental Control (limiting playback
by children)
settings
4
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
73 Using the DVD’s menu
75 Zooming into a scene
76 Changing the angles
77 Displaying the subtitle
(Programme play, Shuffle play,
Repeat play)
82 Changing the sound
83 Virtual surround setting
85 Playing an MP3 audio track
89 Playing JPEG image files
93 Playing VIDEO CDs with “MENU
OUI/NON” functions
95 Playing a tape with SQPB function
96 Quick Timer Recording
98 Recording stereo and bilingual
programmes
101 Searching using index function
103 Adjusting the picture (tracking)
105 Changing menu options
107 Editing
110 General setup information
112 Troubleshooting
117 Glossary
119 Specifications
121 Index to parts and controls
126 DVD Audio/Subtitle Language
127 Index
Table of contents 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Region code
About this manual
Your player has a region code printed on the
back of the unit and only will play DVD VIDEO
discs (playback only) labelled with identical
region codes. This system is used to protect
copyrights.
•
The meaning of the icons used in this manual is
described below:
Icon
Meaning
Functions available for DVD
VIDEOs and DVD-RWs/
DVD-Rs in video mode or
DVD+RWs/DVD+Rs
ALL
DVDs labelled
will also play on this player.
If you try to play any other DVD, the message
“Playback prohibited by area limitations.” will
appear on the TV screen. Depending on the
DVD, no region code indication may be labelled
even though playing the DVD is prohibited by
area restrictions.
Functions available for VIDEO
CDs, Super VCDs or CD-Rs/
CD-RWs in video CD format
or Super VCD format
Functions available for DATA
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks or JPEG files)
X
Region code
SLV–DXXXX
00V 00Hz
NO.
00W
Functions available for music
CDs or CD-Rs/CD-RWs in
music CD format
0-000-000-00
Example of discs that the player
cannot play
Functions available for VHS
VIDEOs
* MP3 (MPEG 1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
The player cannot play the following discs:
• All CD-ROMs (including PHOTO CDs)/CD-
Rs/CD-RWs other than those recorded in the
following formats:
– music CD format
– video CD format
– MP3 or JPEG format that conforms to
ISO9660* Level 1/Level 2, or its extended
format, Joliet
This player can play the
following discs
Format of discs
• Data part of CD-Extras
• DVD-RWs in VR mode
• DVD-ROMs
DVD VIDEO
• DVD Audio discs
• HD layer on Super Audio CDs
* A logical format of files and folders on CD-ROMs,
defined by ISO (International Standard
Organization).
VIDEO CD
Music CD
Also, the player cannot play the following discs:
• A DVD with a different region code.
• A disc that has a non-standard shape (e.g.,
card, heart).
The “DVD VIDEO” logo is a trademark.
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape
or a sticker still left on it.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Some DVD-RWs/DVD-Rs, DVD+RWs/DVD+Rs or
CD-Rs/CD-RWs cannot be played on this player due to
the recording quality or physical condition of the disc,
or the characteristics of the recording device.
Furthermore, the disc will not play if it has not been
correctly finalized. For more information, see the
operating instructions for the recording device.
Note that discs created in the Packet Write format
cannot be played.
Notes about discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
Note on playback operations of
DVDs and VIDEO CDs
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this player plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
Music discs encoded with
copyright protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1 : Unpacking
Check that you have received the following items with the DVD-VCR:
• Remote commander
• PERITEL cable
• R6 (size AA) batteries
• Audio cord
(pinplug ×2 y pinplug ×2)
• Aerial cable
• Video cord
(pinplug ×1 y pinplug ×1)
Check your model name
The instructions in this manual are for the 2 models: SLV-D950B and SLV-D910B. Check
your model name by looking at the rear panel of your DVD-VCR.
SLV-D950B is the model used for illustration purposes. Any difference in operation is
clearly indicated in the text, for example, “SLV-D950B only”.
8
Unpacking
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Using the remote
Remote sensor
commander
You can use this remote
commander to operate this DVD-
VCR and a Sony TV. Buttons on
the remote commander marked
with a dot (•) can be used to
operate your Sony TV.
TV / DVD·VIDEO
If the TV does not have the
symbol near the remote sensor, this
remote commander will not
operate the TV.
SELECT VIDEO
SELECT DVD
To operate
Set TV / DVD·VIDEO to
the DVD player DVD·VIDEO, then press SELECT DVD and point at the remote sensor at
the DVD-VCR
the VCR
your TV
Notes
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor
at the DVD-VCR
TV and point at the remote sensor at your TV
•
•
With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
•
•
•
•
•
Do not use a new battery with an old one.
Do not use different types of batteries.
Do not leave the remote commander in an extremely hot or humid place.
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
continued
Setting up the remote commander 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling other TVs with the remote commander
The remote commander is preprogrammed to control non-Sony TVs. If your TV is
listed in the following table, set the appropriate manufacturer’s code number.
Set TV / DVD·VIDEO at the top of the remote commander to TV.
1
Hold down ?/1, and enter your TV’s code number using the number buttons.
2 Then release ?/1.
Now you can use the ?/1, VOL +/–, PROG +/–, MUTING∗, TV/VIDEO, 0-9 and
-/--∗ buttons to control your TV. You can also use the buttons marked with a dot (•)
to control a Sony TV. To control the DVD-VCR, reset TV / DVD·VIDEO to
DVD·VIDEO.
∗ for Sony TV only
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
Manufacturer
Sony
Code number
Manufacturer
Panasonic
Philips
Code number
01, 02
68
17, 49
06, 07, 08
12, 13
22, 23
25
Akai
Ferguson
Grundig
Hitachi
JVC
52
Saba
10, 11
24
Samsung
Sanyo
33
Sharp
29
Loewe
Mivar
45
Telefunken
Thomson
Toshiba
36
09, 70
66
43
NEC
38
Nokia
15, 16, 69
Notes
•
•
If you enter a new code number, the code number previously entered will be erased.
If the TV uses a different remote control system from the one programmed to work with the
DVD-VCR, you cannot control your TV with the remote commander.
•
When you replace the batteries of the remote commander, the code number may change. Set
the appropriate code number every time you replace the batteries.
10 Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Connecting the DVD-VCR
will optimize the picture and sound for a true “hometheatre” experience.
LINE-1
(EURO AV)
Mains
lead
ANTENNE
ENTREE
to mains
Aerial cable (supplied)
PERITEL
PERITEL cable (supplied)
: Signal flow
Disconnect the aerial cable from your
1
TV and connect it to
on the rear
panel of the DVD-VCR.
Connect
aerial input of your TV using the
supplied aerial cable.
of the DVD-VCR and the
2
3
Connect LINE-1 (EURO AV) on the
DVD-VCR and the PERITEL
connector on the TV with the supplied
PERITEL cable.
This connection improves picture and
sound quality. Whenever you want to
watch the DVD-VCR picture, press
TV/VIDEO to display the VCR
indicator in the display window.
Connect the mains lead to the mains.
4
continued
Connecting the DVD-VCR 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional connection
To a satellite or digital tuner
with Line Through
Using the Line Through
function, you can watch
LINE-3
SORTIE
LIGNE
programmes from a satellite or
digital tuner connected to this
DVD-VCR on the TV even
when the DVD-VCR is turned
off. When you turn on the
satellite or digital tuner, this
DVD-VCR automatically sends
the signal from the satellite or
digital tuner to the TV without
turning itself on.
PERITEL cable (not supplied)
: Signal flow
Connect the satellite or digital tuner to the LINE-3 connector as shown above.
1
2
Turn off the DVD-VCR.
To watch a programme, turn on the satellite or digital tuner and the TV.
Notes
•
•
This function may not work with some types of satellite or digital tuners.
When the DVD-VCR is turned off, set the TV to the video channel.
12 Connecting the DVD-VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Setting up the DVD-VCR with the
Auto Set Up function
Before using the DVD-VCR for the first
time, set up the DVD-VCR using the Auto
Set Up function. With this function, you can
set TV channels, guide channels for the
ShowView system∗, and DVD-VCR clock
automatically.
SET UP
∗ SLV-D950B only
V/v/B/b
ENTER
Turn on your TV and set it to the video channel.
1
2
Connect the mains lead to the mains.
The DVD-VCR automatically turns on and the
“SELECTION DU PAYS” menu appears.
SELECTION DU PAYS
Français
Schweiz
B b
ENTER RETURN SET UP
continued
Setting up the DVD-VCR with the Auto Set Up function 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to select your country, then press
ENTER.
INSTALLATION AUTO
3
ENTER
10%
Merci d’attendre
The DVD-VCR starts searching for all of the
receivable channels and presets them (in the
appropriate order for your local area).
RETURN SET UP
If you want to change the order of the channels
or disable unwanted programme positions, see
After the search is complete, the current time appears for any stations that
transmit a time signal. If the time does not appear, set the clock manually.
To cancel the Auto Set Up function
Press SET UP.
Tip
•
If you want to change the language for the on-screen display from the one preset in the Auto
Set Up function, see page 15.
Notes
•
•
•
•
Whenever you operate the Auto Set Up function, some of the settings (ShowView, timer, etc.)
will be reset. If this happens, you have to set them again.
Auto preset starts automatically only when you plug in the mains lead for the first time after
you purchase the DVD-VCR.
If you want to use the Auto Set Up function again, select “Installation” in the “OPTION”
menu, then press V/v to select “Installation Auto”, then repeat step 3.
Auto preset can be performed by pressing x on the unit continuously for 5 seconds or more
during power off with no tape inserted.
14 Setting up the DVD-VCR with the Auto Set Up function
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Selecting a language
If you prefer an on-screen language other
than French, use the on-screen display to
select another language.
SET UP
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
V/v/B/b
ENTER
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Langue”, then press
SELECTION LANGUE
2
ENTER.
English
ENTER
B
Français
Deutsch
Español
Italiano
The “SELECTION LANGUE” menu appears.
Nederlands
V v
ENTER RETURN SET UP
Press V/v to select the desired language, then press ENTER.
3
4
ENTER
Press SET UP to exit the menu.
SET UP
Selecting a language 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 : Setting the clock
You must set the time and date on the DVD-
VCR to use the timer features properly.
SET UP
The Auto Clock Set function works only if a
station in your area is broadcasting a time
signal.
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
V/v/B/b
ENTER
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “L’horloge”, then press
REGLAGE HORLOGE
2
ENTER.
ENTER
Heure Date
12:00 1/JAN /2003 MER
Horloge Auto [ Oui ]
Année
The “REGLAGE HORLOGE” menu appears.
V v B b
ENTER RETURN SET UP
REGLAGE HORLOGE
Press V/v to set the hour.
3
ENTER
Heure Date
18:00 1/JAN /2003 MER
Horloge Auto [ Oui ]
Année
V v B b
ENTER RETURN SET UP
16 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press b to select the minutes and set the
REGLAGE HORLOGE
4
5
6
minutes by pressing V/v.
ENTER
ENTER
ENTER
Heure Date
Année
18:30 1/JAN /2003 MER
Horloge Auto
[ Oui ]
V v B b
V v B b
V v B b
ENTER RETURN SET UP
REGLAGE HORLOGE
Set the day, month, and year in sequence by
pressing b to select the item to be set, and
press V/v to select the digits, then press b.
Heure Date
18:30 28/SEP /2003 DIM
Horloge Auto [ Oui ]
Année
The day of the week is set automatically.
ENTER RETURN SET UP
REGLAGE HORLOGE
Press V/v to select “Oui” for the setting of the
Auto Clock Set function.
Heure Date
18:30 28/SEP /2003 DIM
Horloge Auto [ Oui ]
Année
The DVD-VCR automatically sets the clock
according to the time signal broadcast between
the channels PR 1 to PR 5.
ENTER RETURN SET UP
If you do not need the Auto Clock Set function,
select “Non”.
Press ENTER to confirm the setting.
7
8
ENTER
Press SET UP to exit the menu.
SET UP
Tips
•
If you set “Horloge Auto” to “Oui”, the Auto Clock Set function is activated whenever the
DVD-VCR is turned off. The time is adjusted automatically by making reference to the time
signal from the station.
•
To change the digits while setting, press B to return to the item to be changed, and select the
digits by pressing V/v.
Note
The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
•
Setting the clock 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7 : Presetting channels
If some channels could not be preset using
the Auto Set Up function, you can preset
them manually.
SET UP
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Installation”, then press
INSTALLATION
2
ENTER.
Installation Auto
Installation Manuelle
ENTER
The “INSTALLATION” menu appears.
V v
ENTER RETURN SET UP
18 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Installation Manuelle”,
LISTE STATIONS TV
3
4
5
6
7
8
then press ENTER.
PR CAN. NOM
DEC SYS.
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
ENTER
1
2
3
4
5
027
029
030
032
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Press V/v to select the row which you want to
preset, then press b.
RECHERCHE MANUELLE
SYS.
PR
CANAL
REGL.FIN
DECODEUR
NOM
:
:
:
:
L / L’
5
–––
ENTER
ENTER
ENTER
ENTER
ENTER
To display other pages for programme
positions 6 to 80, press V/v repeatedly.
–
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “SYS.” if necessary.
RECHERCHE MANUELLE
SYS.
PR
CANAL
REGL.FIN
DECODEUR
NOM
:
:
:
:
L / L’
5
–––
–
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press B/b to set “L/L’” or “B/G” if necessary.
RECHERCHE MANUELLE
SYS.
PR
CANAL
REGL.FIN
DECODEUR
NOM
:
:
:
:
L / L’
5
–––
• To receive broadcast in France, select
“L/L’”.
• To receive broadcast using the PAL system
(for example, in Germany or Switzerland),
select “B/G”.
–
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “CANAL”, then press B/b
repeatedly until the channel you want is
displayed.
RECHERCHE MANUELLE
SYS.
PR
CANAL
REGL.FIN
DECODEUR
NOM
:
:
:
:
L / L’
5
–––
–
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “NOM”, then press b.
RECHERCHE MANUELLE
SYS.
PR
CANAL
REGL.FIN
:
:
:
:
L / L’
5
033
–
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
continued
Presetting channels 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter the station name.
RECHERCHE MANUELLE
9
SYS.
:
:
:
:
L / L’
5
033
1 Press V/v to select a character.
Each time you press V, the character
changes as shown below.
PR
ENTER
CANAL
REGL.FIN
–
DECODEUR
NOM
:
:
NON
O–––
MEMOIRE : ENTER
v V b B
A t B t … t Z t 0 t 1 t … t 9
t A
RETURN
2 Press b to set the next character.
The next space flashes.
To correct a character, press B/b until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
Press ENTER to confirm the station name.
10
11
ENTER
Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
If the picture is not clear
If the picture is not clear, you may use the Manual Fine Tuning (REGL.FIN)
function. After step 7, press V/v to select “REGL.FIN”. Press B/b to get a clear
picture. Then press ENTER.
Tips
•
To set the programme position for the decoder, see “Setting the Canal Plus decoder” on
•
The DVD-VCR must receive channel information for station names to appear automatically.
Note
When adjusting REGL.FIN, the menu may become difficult to read due to interference from
the picture being received.
•
20 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/disabling programme positions
After setting the channels, you can change
the programme positions as you like. If any
programme positions are unused or contain
unwanted channels, you can disable them.
You can also change the station names. If the
station names are not displayed, you can
enter them manually.
Changing programme
positions
Before you start…
SET UP
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Installation”, then press
INSTALLATION
2
ENTER.
Installation Auto
Installation Manuelle
ENTER
The “INSTALLATION” menu appears.
V v
ENTER RETURN SET UP
continued
Presetting channels 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Installation Manuelle”,
LISTE STATIONS TV
3
4
5
then press ENTER.
PR CAN. NOM
DEC SYS.
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
ENTER
ENTER
ENTER
ENTER
1
2
3
4
5
027
029
030
032
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Press V/v to select the row containing the
programme position you want to change.
LISTE STATIONS TV
PR CAN. NOM
DEC SYS.
1
2
3
4
5
027
029
030
032
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
To display other pages for programme
positions 6 to 80, press V/v repeatedly.
v V
B
MODIF.ST : ENTER
EFFACE : CLEAR
RETURN
Press ENTER, then press V/v to move to the
desired programme position.
LISTE STATIONS TV
PR CAN. NOM
DEC SYS.
1
2
3
4
5
027
AAB – NON L / L’
030
032
029
CDE – NON L / L’
I J K – NON L / L’
LMN – NON L / L’
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Press ENTER to confirm the setting.
6
7
To change the programme position of another station, repeat steps 4 through 6.
Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
22 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Disabling unwanted programme positions
After presetting channels, you can disable
unused programme positions. The disabled
positions will be skipped later when you
press the PROG +/– buttons.
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
CLEAR
SET UP
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Installation”, then press
INSTALLATION
2
ENTER.
Installation Auto
Installation Manuelle
ENTER
The “INSTALLATION” menu appears.
V v
ENTER RETURN SET UP
continued
Presetting channels 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Installation Manuelle”,
LISTE STATIONS TV
3
4
5
then press ENTER.
PR CAN. NOM
DEC SYS.
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
ENTER
1
2
3
4
5
027
029
030
032
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Press V/v to select the row which you want to
disable.
LISTE STATIONS TV
PR CAN. NOM
DEC SYS.
ENTER
1
2
3
4
5
027
029
030
032
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
To display other pages for programme
positions 6 to 80, press V/v repeatedly.
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Press CLEAR.
LISTE STATIONS TV
CLEAR
PR CAN. NOM
DEC SYS.
The selected row will be cleared as shown on
the right.
1
2
3
4
5
027
AAB – NON L / L’
030
032
CDE – NON L / L’
I J K – NON L / L’
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
Repeat steps 4 and 5 for any other programme positions you want to
disable.
6
7
Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
Note
•
Be sure to select the programme position you want to disable correctly. If you disable a
programme position by mistake, you need to reset that channel manually.
24 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the station names
You can change or enter the station names
(up to 4 characters). The DVD-VCR must
receive channel information for station
names to appear automatically.
SET UP
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
V v
ENTER RETURN SET UP
ENTER
Press V/v to select “Installation”, then press
INSTALLATION
2
3
ENTER.
Installation Auto
Installation Manuelle
ENTER
The “INSTALLATION” menu appears.
V v
ENTER RETURN SET UP
LISTE STATIONS TV
Press V/v to select “Installation Manuelle”,
then press ENTER.
PR CAN. NOM
DEC SYS.
ENTER
1
2
3
4
5
027
029
030
032
033
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
–
–
–
–
NON L / L’
v V
B
MODIF.ST : ENTER
EFFACER : CLEAR
RETURN
continued
Presetting channels 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the row which you want to
RECHERCHE MANUELLE
4
5
6
change or enter the station name, then press b.
SYS.
:
:
:
:
L / L’
5
033
PR
ENTER
ENTER
ENTER
CANAL
To display other pages for programme
positions 6 to 80, press v/V repeatedly.
REGL.FIN
–
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “NOM”, then press b.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
L / L’
5
033
–
REGL.FIN
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Enter the station name.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
L / L’
5
033
–
1 Press V/v to select a character.
Each time you press V, the character
changes as shown below.
REGL.FIN
DECODEUR
NOM
:
:
NON
O–––
MEMOIRE : ENTER
v V b B
A t B t … t Z t 0 t 1 t … t 9
t A
RETURN
2 Press b to set the next character.
The next space flashes.
To correct a character, press B/b until the character you want to correct
flashes, then reset it.
You can set up to 4 characters for the station name.
Press ENTER to confirm the new name.
7
8
ENTER
Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
26 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Canal Plus decoder
You can watch or record Canal Plus programmes if you connect a decoder (not supplied) to the
DVD-VCR.
Connecting a decoder
Canal Plus
PERITEL cable
decoder
(not supplied)
PERITEL
LINE-3
LINE-1 (EURO AV)
ANTENNE
ENTREE
Aerial cable (supplied)
PERITEL
PERITEL cable (supplied)
: Signal flow
continued
Setting the Canal Plus decoder 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Canal Plus channels
To watch or record Canal Plus programmes,
set your DVD-VCR to receive the channels
using the on-screen display.
SET UP
In order to set the channels correctly, be sure
to follow all of the steps below.
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
V/v/B/b
ENTER
O RETURN
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
Press SET UP, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Installation”, then press
INSTALLATION
2
3
ENTER.
Installation Auto
Installation Manuelle
ENTER
The “INSATLLATION” menu appears.
V v
ENTER RETURN SET UP
LISTE STATIONS TV
Press V/v to select “Installation Manuelle”,
then press ENTER.
PR CAN. NOM
DEC SYS.
ENTER
1
2
3
4
5
027
029
030
032
033
AAB – NON L / L’
LMN – NON L / L’
CDE – NON L / L’
I J K – NON L / L’
– – – – NON L / L’
v V
B
MODIF.ST
:
ENTER
RETURN
EFFACER : CLEAR
28 Setting the Canal Plus decoder
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the row which you want to
RECHERCHE MANUELLE
4
5
6
7
8
9
set for the decoder, then press b.
SYS.
:
:
:
:
L / L’
5
033
–
PR
ENTER
CANAL
To display positions 6 to 80, press V/v
repeatedly.
REGL.FIN
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “SYS.” if necessary.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
L / L’
5
033
ENTER
REGL.FIN
–
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press B/b to set “L/L’” or “B/G” if necessary.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
L / L’
5
033
• To receive broadcast in France, select
“L/L’”.
• To receive broadcast using the PAL system
(for example, in Germany or Switzerland),
select “B/G”.
ENTER
REGL.FIN
–
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press V/v to select “DECODEUR”.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
L / L’
5
033
–
ENTER
REGL.FIN
DECODEUR
NOM
:
:
NON
– – – –
MEMOIRE : ENTER
v V b B
RETURN
Press b to set “DECODEUR” to “OUI”, then
press ENTER.
RECHERCHE MANUELLE
SYS.
PR
CANAL
:
:
:
:
:
:
L / L’
5
033
–
OUI
– – – –
ENTER
REGL.FIN
DECODEUR
NOM
MEMOIRE : ENTER
v V b B
RETURN
Press O RETURN, then press SET UP to exit the menu.
RETURN
SET UP
continued
Setting the Canal Plus decoder 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
To superimpose subtitles while watching Canal Plus programmes, make both decoder-VCR
and VCR-TV connections using 21-pin PERITEL cables that are compatible with the RGB
signals. You cannot record subtitles on the VCR.
•
When you watch Canal Plus programmes through the RFU input of the TV, press TV/VIDEO
so that the VCR indicator appears in the display window.
30 Setting the Canal Plus decoder
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing discs
Depending on the disc, some operations may
be different or restricted. Refer to the
operating instructions supplied with your
disc.
?/1
Z
Before you start...
• Turn on the DVD-VCR and your TV.
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT DVD to control the
m/M
SLOW y
C
./>
X
x
H
Press Z to open the disc tray and
place a disc on the disc tray.
1
with the playback side
facing down
continued
Playing discs 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Press H.
2
The disc tray closes and the DVD player starts playback.
The display window shows the
playback time.*
Depending on the disc, a menu
may appear on the TV screen.
Hour Minute Second
* “– – – – –” appears when no disc
is loaded.
Additional tasks
To
Press
x
Stop play
Pause play∗
X
Resume play after pause
Advance by frame in pause mode
X or H
C
Go to the next chapter, track, or scene > on the remote
in continuous play mode
Go back to the previous chapter, track, . on the remote
or scene in continuous play mode
Stop play and remove the disc
Z
* If you pause the DVD player for more than 5 minutes, the DVD player will automatically
stop.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
While playing a disc, press x to stop playback.
1
2
Press H.
The DVD player starts playback from the point where you stopped the disc in
step 1.
Tip
•
To begin playback from the top of the disc, press x twice then press H.
32 Playing discs
Download from Www.Somanuals.com. All Manuals Search And Download.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode (DVD, VIDEO CD and CD only)
Press m or M.
For DVD or VIDEO CD, each time you press the button, the playback speed changes
as follows.
× 2 t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 (DVD only) t
FF5/FR5 (DVD only)
Release the button at the desired speed.
For CD, the searching speed does not change (FF2/FR2 play).
When you find the point you want, press H.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X, then press M SLOW y. With each press, the playback speed changes
cyclically as follows.
To resume normal playback, press H.
Tip
•
To make a video timer reservation during DVD playback, we recommend performing the
operations under “Quick Timer Recording” (page 96).
Notes
•
•
•
Do not perform VIDEO playback while playing back a disc.
If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch or skip to the next track.
•
•
•
You cannot change the MP3 or the Multi Session CD playback speed.
VIDEO CD fast foward/reverse cannot be paused.
During CD fast forward/reverse play, no sound is output.
Notes on playing DTS* sound tracks on a CD
•
When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
•
•
Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a
Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Non” in
damaged.
continued
Playing discs 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on playing DVDs with a DTS sound track
•
•
•
DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
When you play a DVD with DTS sound tracks, set “DTS” to “Oui” in “Options Audio” menu
If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
34 Playing discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the on-screen display
You can check disc information during
playback.
V/v/B/b
ENTER
The displayed contents differ according to
the type of disc being played.
O RETURN
DISPLAY
Press DISPLAY. The following information appears; type of disc, current title/track,
chapter, counter position, voice language, subtitle language and surround setting.
language.
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Surround setting
V v B b
ENTER
You can playback the desired title/track, chapter or counter position using this menu.
To playback the desired title/track or chapter
Press V/v to select the desired item.
1
2
3
Press B/b to change the item.
V v B b
ENTER
Press ENTER to start playback.
Press DISPLAY or O RETURN to turn off the
4 menu.
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter position.
continued
Guide to the on-screen display 35
Download from Www.Somanuals.com. All Manuals Search And Download.
To playback from the desired title/track counter
position
Press V/v to select the counter position icon.
1
Enter the desired elapsed playing time of the current
2 title/track using the number buttons.
~
9
V v B b
-
ENTER
Press ENTER to start playback.
3
Press DISPLAY or O RETURN to turn off the
4 menu.
Tip
•
You can change the counter position information (playing time or remaining time) using
B/b (DVD and CD only).
DVD
Indication
Counter information
T
∗ : ∗∗ : ∗∗
T– ∗ : ∗∗ : ∗∗
∗ : ∗∗ : ∗∗
Elapsed playing time of the current title
Remaining time of the current title
Elapsed playing time of the current chapter
Remaining time of the current chapter
C
C– ∗ : ∗∗ : ∗∗
CD
Indication
Counter information
T
∗ : ∗∗ : ∗∗
Elapsed playing time of the current track
Remaining time of the current track
Elapsed playing time of the disc
Remaining time of the disc
T– ∗ : ∗∗ : ∗∗
D ∗ : ∗∗ : ∗∗
D– ∗ : ∗∗ : ∗∗
Notes
•
•
The display may not change as operated depending on the disc.
The display window continue indicating the playing time even when the counter position
information on the on-screen display is being changed.
36 Guide to the on-screen display
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a tape
Before you start...
• Turn on the DVD-VCR and your TV.
?/1
Z
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
TRACKING +/–
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
CLEAR
m
M SLOW y
C STEP
./> SHUTTLE
X
x
H
DISPLAY
Insert a tape.
1
The VCR starts playing automatically if
you insert a tape with its safety tab
removed.
Press H.
2
The display window shows the
playback time.
When the tape reaches the end,
it will rewind automatically.
Hour Minute Second
continued
Playing a tape 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional tasks
To
Press
Stop play
x
Pause play∗
X
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
X or H
M during stop
m during stop
Z
* If you pause the VCR for more than 5 minutes, the VCR will automatically resume play.
To play a recently watched scene
You can immediately rewind and playback the scene you want to watch again.
To skip playback
You can skip a scene that you do not want to watch (such as a commercial) and restart
playback.
During playback, press C STEP. The VCR skips the tape 30 seconds on the
counter each time the button is pressed (up to four times) and playback is resumed.
To turn off the power while rewinding (Rewind Shut Off)
Press ?/1 while the tape is rewinding. The power will turn off, but the tape will keep
rewinding until it reaches the end.
To play/search at various speeds
Playback options
Operation
View the picture during fast-
forward or rewind
During fast-forward, hold down M. During rewind, hold
down m.
Play at high speed
•
•
During playback, briefly press M or m. The tape
continues to play at 5 times normal speed.
During playback, hold down M or m. The tape
continues to play at 5 times normal speed. When you
release the button, normal playback resumes.
Play in slow motion
Play frame by frame
During pause, press M SLOW y.
During pause, press C STEP.
Play at various speeds
(Shuttle play)
During playback, press .or >. You can change the
playback speed as follows.
REVIEW*1 y –× 2 y –× 1 y –SLOW y STILL y
SLOW y PLAY y × 2 y CUE*1
*1 “REW” flashes in the display window.
*2 “FF” flashes in the display window.
38 Playing a tape
Download from Www.Somanuals.com. All Manuals Search And Download.
To resume normal playback
Press H.
To set the colour system
If the playback picture has no colour, or streaks appear during palyback, set the “Syst.
Couleur” option in the “REGLAGES UTILISATEUR” menu to conform to the
“Auto”).
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00”.
To display the counter on the TV screen, press DISPLAY during normal playback.
Tip
•
Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– Bands appear at the top or bottom while pausing.
– The picture shakes during pause.
Notes
•
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
•
•
•
The counter resets to “0:00:00” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
Depending on your TV, the following may occur while playing an NTSC-recorded tape:
– The picture becomes black and white.
– The picture shakes.
– No picture appears on the TV screen.
– Black streaks appear horizontally on the TV screen.
– The colour density increases or decreases.
•
When 10 hours have passed, the counter in the display window returns to “0:00:00” and the
count starts over again.
•
•
•
The sound is muted during playback at various speeds.
The picture may show noise when playing at high speed in reverse.
While playing a tape, you can display the setup menu, but the remote commander’s function
switches to DVD automatically. Press SET UP to exit the menu.
•
•
Stop disc playback while playing back a video.
The picture returns to normal playback from slow motion in reverse in 30 seconds.
Playing a tape 39
Download from Www.Somanuals.com. All Manuals Search And Download.
• To record a normal channel, press PROG +/– until the programme
position number you want appears in the display window.
• PROG/
TRACKING
2
INPUT
SELECT
• To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT until the connected line appears in
the display window.
Press SP/LP to select the tape speed, SP or LP.
SP / LP
3
4
LP (Long Play) provides recording time twice as long as SP. However, SP
(Standard Play) produces better picture and audio quality.
Press z REC to start recording.
REC
The recording indicator lights up red in the display window.
Recording indicator
To stop recording
Press x.
To check the remaining time
Press DISPLAY twice. With the display on, press DISPLAY again to check the
remaining time.
REMAIN
0
: 0 0 : 2 2
1 : 4 6
Time counter
Remaining tape length
continued
Recording TV programmes 41
Download from Www.Somanuals.com. All Manuals Search And Download.
In order to get an accurate remaining time indication, be sure “Sélect. Cassette” in the
“REGLAGE DE LA FONCTION VIDEO” menu is set according to the tape type
Maximum Recording Time
Tape Length
E-180
SP
3 hrs
LP
6 hrs
E-240
4 hrs
8 hrs
E-260
4 hrs 20 mins
5 hrs
8 hrs 40 mins
10 hrs
E-300
To watch another TV programme while recording
Press TV/VIDEO to display “TV” in the display window.
1
Select another channel on the TV.
2
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
1
2
3
Press Z and place the disc on the disc tray.
Press H.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Safety tab
Tips
•
•
•
•
To select a programme position, you can use the number buttons on the remote commander.
For two-digit numbers, for example, press 2 and 3 to select “PR 23”.
If you connect additional equipment to a LINE connector or jack, you can select the input
signal using the INPUT SELECT or PROG +/– buttons.
The DISPLAY information appears on the TV screen indicating information about the tape,
but the information will not be recorded on the tape.
If you do not want to watch TV while recording, you can turn off the TV. When using a
decoder, make sure to leave it on.
42 Recording TV programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
If a tape has portions recorded in both PAL (SECAM, MESECAM) and NTSC systems, the
time counter reading will not be correct. This discrepancy is due to the difference between
the counting cycles of the two video systems.
•
•
You cannot watch a Canal Plus programme while recording another Canal Plus programme.
When you insert a non-standard commercially available tape, the remaining time may not be
correct.
•
•
•
•
The remaining time is intended for rough measurement only.
About 30 seconds after the tape begins playback, the tape remaining time will be displayed.
You cannot record a DVD to a VCR tape.
To watch a TV programme during video recording, stop disc playback.
Recording TV programmes 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the
ShowView® system (SLV-D950B only)
The ShowView system is the feature that
simplifies programming the VCR to make
Z
timer recordings. Just enter the ShowView
number listed in the TV programme guide.
?/1
The date, times, and programme position of
that programme are set automatically. You
can preset a total of six programmes,
including settings made with other timer
methods.
SELECT VIDEO
Number
buttons
Before you start...
CLEAR
TV/VIDEO
• Check that the DVD-VCR clock is set to
the correct time.
INPUT SELECT
TIMER
• Turn on the DVD-VCR and your TV.
• Set your TV to the video channel so that
the signal from the player appears on the
TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
x
• When using a decoder, turn it on.
V/v/B/b
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
ENTER
Press TIMER.
OPTIONS PROG.
SUBTITLE/
TIMER
1
The “OPTIONS PROG.” menu appears.
Normal
ShowView
V
v
ENTER RETURN SET UP
Recording TV programmes using the ShowView® system (SLV-D950B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
44
Press V/v to select “ShowView”, then press
ShowView
2
3
ENTER.
ENTER
Code – – – – – – – – –
The “ShowView” menu appears.
Code
: 0–9
B
Corriger :
RETURN SET UP
Press the number buttons to enter the
ShowView number.
ShowView
1
4
7
2
5
8
0
3
6
9
Code 1 2 3 4 – – – – –
Code : 0–9
If you make a mistake, press CLEAR and re-
enter the correct number.
Corriger :
B
You can also press B to delete the last entered
number.
ENTER RETURN SET UP
CLEAR
ENTER
Press ENTER.
PR JOUR DEBT FIN SPEED V/P
4
35 SA 19 19 : 00 20 : 00 SP Non
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
The date, start and stop times, programme
position, tape speed and VPS (Video
Programme System)/PDC (Programme
Delivery Control) setting appear on the TV
screen.
ENTER
INPUT
SELECT
V v B b
ENTER RETURN CLEAR
• If “– –” appears in the “PR” (programme)
column (this may happen for local broadcasts), you have to set the
appropriate programme position manually.
CLEAR
Press V/v to select the desired programme position.
• To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line in the
“PR” position.
You will only have to do this operation once for the referred channel. The
VCR will then store your setting.
If the information is incorrect, press CLEAR to cancel the setting.
continued
Recording TV programmes using the ShowView® system (SLV-D950B only)
45
Download from Www.Somanuals.com. All Manuals Search And Download.
If you want to change the date, tape speed and
the VPS/PDC setting:
PR JOUR DEBT FIN SPEED V/P
5
6
35 SA 19 19 : 00 20 : 00 SP Non
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
–– –– –– ––:–– ––:–– –– ––
ENTER
1 Press B/b to select the item you want to
change.
2 Press V/v to reset it.
• To record the same programme every day or
the same day every week, see “Daily/weekly
• To use the VPS/PDC function, set “V/P” to “Oui”. For details about the
VPS/PDC function, see “Timer recording with VPS/PDC signals” on
V v B b
ENTER RETURN CLEAR
Press ENTER to confirm the setting.
ENTER
Press ENTER to confirm all settings.
7
8
ENTER
Press ?/1 to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press x.
Daily/weekly recording
indication changes as shown below. Press V to change the indication in reverse order.
today t JOUR (Monday to Sunday) t S-SA (every Saturday) ..... t
S-DI (every Sunday) t 1 month later t (dates count down) t today
Timer recording with VPS/PDC signals
Some broadcast systems transmit VPS or PDC signals with their TV programmes.
These signals ensure that your timer recordings are made regardless of broadcast
delays, early starts, or broadcast interruptions.
the VPS/PDC function for a source connected to one or more of the LINE inputs.
Recording TV programmes using the ShowView® system (SLV-D950B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
46
To watch another TV programme after setting the timer
Press TV/VIDEO to display “TV” in the display window.
1
If your TV is connected to the VCR using A/V connections, set the TV to the
2 TV’s aerial input; if not, skip this step.
Select another channel on the TV.
3
Tips
•
•
•
To set the channel, you can also use the V/v or number buttons.
If the indicator appears, this means that the VCR is currently recording this programme.
You can also do the following tasks while the VCR is recording:
To use the Auto Tape Speed function
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Sélect. Cassette” setting in the “REGLAGE DE LA
Tips
•
•
To set the line input video source, you can also use the INPUT SELECT button.
You can set the extended time for the ShowView setting by 10, 20, 30, 40, 50, or 60 minutes.
Set “Etendre ShowView” in the “REGLAGES UTILISATEUR” menu to the desired
extended time on page 110.
•
To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
Notes
•
If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
•
The
indicator flashes in the display window when you press ?/1 with no tape inserted.
Recording TV programmes using the ShowView® system (SLV-D950B only)
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using the timer
You can preset up to six programmes at a
Z
time.
?/1
Before you start…
SELECT VIDEO
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
CLEAR
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
• When using a decoder, turn it on.
TV/VIDEO
TIMER
INPUT
SELECT
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
x
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
48 Recording TV programmes using the timer
Download from Www.Somanuals.com. All Manuals Search And Download.
SUBTITLE/
TIMER
Press TIMER.
OPTIONS PROG.
1
• SLV-D950B
Normal
ShowView
The “OPTIONS PROG.” menu appears.
V v
ENTER RETURN SET UP
• SLV-D910B
PR JOUR DEBT FIN SPEED V/P
The timer programming menu appears. Step
2 is skipped.
V v B b
SET UP
SLV-D950B only
Press V/v to select “Normal”, then press
ENTER.
PR JOUR DEBT FIN SPEED V/P
2
3
ENTER
The timer programming menu appears.
V v B b
SET UP
Set the date, start and stop times, programme
position, tape speed and VPS/PDC function:
PR JOUR DEBT FIN SPEED V/P
ENTER
1 Press b to select each item in turn.
2 Press V/v to set each item.
To correct a setting, press B to return to that
setting and reset.
V v B b
SET UP
CLEAR
• To record the same programme every day or the same day every week,
• To use the VPS/PDC function, set “V/P” to “Oui.” For details about the
VPS/PDC function, see “Timer recording with VPS/PDC signals” on
• To record from a decoder or other source connected to one or more of the
LINE inputs, press INPUT SELECT to display the connected line in the
“PR” position.
INPUT
SELECT
Press ENTER to confirm the setting.
4
Press CLEAR to cancel the setting.
ENTER
CLEAR
continued
Recording TV programmes using the timer 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ENTER to confirm all settings.
5
6
ENTER
Press ?/1 to turn off the DVD-VCR.
The
indicator appears in the display window and the VCR stands by for
recording.
To record from a decoder or other source, leave the connected equipment
switched on.
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press x.
Daily/weekly recording
indication changes as shown below. Press V to change the indication in reverse order.
today t JOUR (Monday to Sunday) t S-SA (every Saturday) ..... t
S-DI (every Sunday) t 1 month later t (dates count down) t today
To use the Auto Tape Speed function
the SP mode and the remaining tape length becomes shorter than the recording time,
the recording tape speed is automatically changed to the LP mode. Note that some
noise will appear on the picture when the tape speed is changed. To operate this
function correctly, the “Sélect. Cassette” setting in the “REGLAGE DE LA
FONCTION VIDEO” menu must be accurate (see page 105).
Tips
•
•
To set the line input video source, you can also use the INPUT SELECT button.
To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
Notes
•
•
•
When setting the timer with VPS/PDC signals, enter the start times exactly as indicated in the
TV programme guide. Otherwise, the VPS/PDC function will not work.
If the VPS/PDC signal is too weak or the broadcasting station failed to transmit VPS/PDC
signals, the VCR will start recording at the set time without using the VPS/PDC function.
The
indicator flashes in the display window when you press ?/1 with no tape inserted.
50 Recording TV programmes using the timer
Download from Www.Somanuals.com. All Manuals Search And Download.
To watch another TV programme after setting the timer
Press TV/VIDEO to display “TV” in the display window.
1
If your TV is connected to the VCR using A/V connections, set the TV to the
2 TV’s aerial input; if not, skip this step.
Select another channel on the TV.
3
Tips
•
•
•
To set the channel, you can also use the V/v or number buttons.
If the indicator appears, this means that the VCR is currently recording this programme.
You can also do the following tasks while the VCR is recording:
Recording TV programmes using the timer 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programmes using DIAL
TIMER (SLV-D950B only)
The Dial Timer function allows you to make
x
PROGRAM +/–
?/1
timer recordings of programmes without turning
on your TV. Set the recording timer to record up
to six programmes that will be broadcast within
a month using DIAL TIMER. The recording
start time and recording stop time can be set at
one minute intervals.
X
DIAL TIMER
Before you start…
• Turn on the DVD-VCR.
• When using a decoder, turn it on.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• Stop the DVD-VCR.
Press
DIAL TIMER.
DIAL TIMER
1
2
DATE indicator appears and the current date flashes in the display window.
If the date and time are not set, DAY indicator will appear. To set the date
Turn
DIAL TIMER to set the recording date.
DIAL TIMER
52 Recording TV programmes using DIAL TIMER (SLV-D950B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
DIAL TIMER to set the start time.
DIAL TIMER
3
“START” and the next quarter hour increment appear alternately in the
display window.
Turn
DIAL TIMER to set the recording start time.
DIAL TIMER
4
5
You can set the recording start time in 15 minute intervals or adjust the time
in one minute intervals by pressing the PROGRAM +/– buttons on the unit.
PROGRAM
DIAL TIMER
Press
DIAL TIMER to set the stop time.
“STOP” and the next quarter hour increment appear alternately in the
display window.
Turn
DIAL TIMER to set the recording stop time.
DIAL TIMER
6
You can set the recording stop time in 15 minute intervals or adjust the time
in one minute intervals by pressing the PROGRAM +/– buttons on the unit.
PROGRAM
continued
Recording TV programmes using DIAL TIMER (SLV-D950B only) 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Press
DIAL TIMER.
DIAL TIMER
7
8
The current programme position number flashes in the display window.
Turn
To record from a source connected to the LINE-1 connector, LINE-2 IN
jacks or LINE-3 connector, turn DIAL TIMER or press INPUT
SELECT to display “L1”, “L2” or “L3”.
DIAL TIMER to set the programme position number.
DIAL TIMER
INPUT
SELECT
Press
DIAL TIMER.
DIAL TIMER
9
The current tape speed flashes in the display window.
Turn
DIAL TIMER to set the tape speed.
DIAL TIMER to complete the setting.
DIAL TIMER
10
11
Press
DIAL TIMER
“OK” appears in the display window for about five seconds.
The timer indicator appears in the display window and the VCR stands by
for recording. When using a decoder, leave it on.
To return to the previous step
To return to the previous step, press the PROGRAM + and – buttons on the unit at the
same time during any of the Dial Timer settings.
54 Recording TV programmes using DIAL TIMER (SLV-D950B only)
Download from Www.Somanuals.com. All Manuals Search And Download.
To set the clock
Hold down
DIAL TIMER so that DAY indicator appears in the display
1 window. However, if the clock has already been set, the current setting appears.
2
Turn
DIAL TIMER to set the day.
Press
DIAL TIMER.
3 MONTH indicator appears in the display window.
Turn and press
DIAL TIMER to set the month and then the year.
4 After you set the year, “CLOCK” appears in the display window.
Turn and press
DIAL TIMER to set the hour and minute.
5
When you have finished setting the time, press
DIAL TIMER to start the
6 clock.
Tips
•
•
To cancel a Dial Timer setting, press any button other than DIAL TIMER or
PROGRAM +/– on the unit or any button on the remote while you are making the setting.
To check, change, or cancel the programme setting, see “Checking/changing/cancelling timer
Notes
•
If six programmes have already been set using the ShowView system or the manual timer
setting, “FULL” appears in the display window for about five seconds.
•
If you set the clock using the Auto Clock Set feature, the clock will adjust itself to the
incoming time signal regardless of adjustments made with DIAL TIMER. Be sure you have
set Auto Clock Set correctly.
•
If you are setting the clock for the first time or “0:– –” appears in the display window, you
cannot set the clock to February 29th using DIAL TIMER. Please use the Auto Clock Set
feature to set the VCR to this day.
•
•
The timer indicator flashes in the display window when you complete the setting in step 11
on page 54 with no tape inserted.
When the setting time is incorrect, “Error” appears in the display window in step 11. Set the
timer again from step 1.
About the Demonstration Mode
The Dial Timer function has a Demonstration Mode that allows the user, such as a
salesperson, to enter more than six examples of timer settings when demonstrating
the use of DIAL TIMER. It cancels the FULL notice which appears if six
programmes have already been set. Do not use the Demonstration Mode for making
timer recordings. Doing so may cause the settings to be inaccurate.
To activate the Demonstration Mode
Press X on the unit while turning DIAL TIMER. “DEMO” appears in the display
window for a few seconds.
To cancel the Demonstration Mode
Turn the power off and unplug the mains lead. Although the Demonstration Mode is
cancelled, the timer settings entered while using the Demonstration Mode will
remain. Be sure to manually cancel the timer settings before you use DIAL TIMER
Recording TV programmes using DIAL TIMER (SLV-D950B only) 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/changing/cancelling timer
settings
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
• When using a decoder, turn it on.
CLEAR
SET UP
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
• If the DVD player is in play mode, you
cannot display the setup menu. Stop the
DVD playback.
V/v/B/b
ENTER
56 Checking/changing/cancelling timer settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Press SET UP, then press V/v to select
SET UP
OPTIONS PROG.
1
(TIMER) and press ENTER.
Normal
ShowView
• SLV-D950B
The “OPTIONS PROG.” menu appears.
ENTER
V v
ENTER RETURN SET UP
• SLV-D910B
The timer programming menu appears. Step
2 is skipped.
PR JOUR DEBT FIN SPEED V/P
35 LU 30 20 :0 0 21 00 SP Non
:
20 ME 02 22 :00 23 30 LP Non
:
Non
60 MA 30 20 :3 0 22 : 00
Auto
V v B b
SET UP
ENTER CLEAR
SLV-D950B only
Press V/v to select “Normal”, then press ENTER.
2
3
4
ENTER
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press SET UP to exit the menu.
SET UP
Press V/v to select setting you want to change
or cancel.
PR JOUR DEBT FIN SPEED V/P
35 LU 30 20 :0 0 21 00 SP Non
:
ENTER
20 ME 02 22 :00 23 30 LP Non
:
Non
60 MA 30 20 :3 0 22 : 00
Auto
• To change the setting, press B/b to flash the
item you want to change, and press V/v to
change it.
CLEAR
V v B b
SET UP
ENTER CLEAR
• To cancel the setting, press CLEAR.
Press ENTER to confirm the setting.
If any settings remain, turn off the VCR to return to recording standby.
ENTER
continued
Checking/changing/cancelling timer settings 57
Download from Www.Somanuals.com. All Manuals Search And Download.
When the timer settings overlap
The programme that starts first has priority and the second programme starts
recording only after the first programme has finished. If the programmes start at the
same time, the programme listed first in the menu has priority.
Programme 1
Programme 2
about 20 seconds
will be cut off
Programme 1
Programme 2
about 20 seconds will be cut off
58 Checking/changing/cancelling timer settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Hookups
A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby∗ Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
∗ Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-
D symbol are trademarks of Dolby Laboratories.
DVD-VCR
A
Stereo audio cord
(supplied)
(red)
R
AUDIO
L
(white)
VIDEO
to OUT AUDIO L/R
(white)
(red)
l: Signal flow
to audio input
[Speakers]
Front (L)
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Front (R)
Subwoofer
Centre
continued
A/V Receiver hookup 59
Download from Www.Somanuals.com. All Manuals Search And Download.
B Use this hookup if your A/V receiver has a Dolby Digital, MPEG audio
or DTS∗ decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital, MPEG audio or DTS
decoder function of your AV amplifier (receiver). You are not able to enjoy the
B-1
surround sound effects of this player. You must make connections using
and
B-2
.
∗ “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DVD-VCR
to DIGITAL AUDIO OUT
(COAXIAL or OPTICAL)
B-2
B-1
Stereo audio cord
(supplied)
(red)
DIGITAL AUDIO OUT
COAXIAL
R
AUDIO
OPTICAL
L
(white)
VIDEO
and
or
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to OUT AUDIO L/R
Coaxial digital cord
(not supplied)
l: Signal flow
(white)
(red)
to audio input
to coaxial or optical
digital input
[Speakers]
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L)
Subwoofer
Front (L)
Centre
Rear (R)
Note
Front (R)
•
After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
has an MPEG audio decoder function, set “MPEG” to “MPEG” in “OPTIONS AUDIO”
60 A/V Receiver hookup
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video hookup
Make audio connections using the OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks when you use S-VIDEO hookup.
Use this hookup if your TV has an S VIDEO input jack
• Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
DVD-VCR
TV
l : Signal flow
(DVD only)
INPUT
S VIDEO
or
or
Coaxial
digital cord
(not supplied)
Optical digital
cord (not
supplied)
Audio cord
(supplied)
S VIDEO cord
(not supplied)
Remove jack
cap before
connecting
to audio
input
to coaxial or optical
digital input
TV or AV amplifier
Notes
•
pictures from the S-VIDEO jack.
•
The connection using S-VIDEO OUT jack is only for the DVD player.
S-Video hookup 61
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Settings and Adjustments
Audio Setup
“Options Audio” allows you to set the sound
according to the playback and connection
conditions.
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
SET UP
REGLAGE DU DVD
1
mode, then press V/v to select
(DVD)
Réglage de la langue
Options Audio
Réglage de L’écran
Cont. Parental
and press ENTER.
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Options Audio”, then
OPTIONS AUDIO
2
3
press ENTER.
Dolby Digital
MPEG
DTS
Audio DRC
48kHz/96kHz PCM
[ D-PCM ]
[ PCM ]
[ Non ]
[ Standard ]
[ 48kHz/16bit ]
ENTER
V v B b
RETURN SET UP
Press V/v to select the setup item from the displayed list:
“Dolby Digital”, “MPEG”, “DTS”, “Audio DRC”, or “48kHz/96kHz
PCM”.
ENTER
62 Audio Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to select an item.
4
5
ENTER
Press SET UP to exit the menu.
SET UP
Menu choices
• Dolby Digital
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• MPEG
Selects the type of MPEG audio signal.
The default setting is indicated in bold print.
PCM
Select this when the player is connected to an audio component
lacking a built-in MPEG decoder. If you play MPEG audio sound
tracks, the player outputs stereo signals via the DIGITAL AUDIO
OUT (OPTICAL or COAXIAL) jack.
MPEG
Select this when the player is connected to an audio component
with a built-in MPEG decoder.
• DTS
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Non
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
Oui
Select this when the player is connected to an audio component
with a built-in DTS decoder.
continued
Audio Setup 63
Download from Www.Somanuals.com. All Manuals Search And Download.
• Audio DRC (Dynamic Range Control)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC”. This affects the output from the following jacks:
– OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby
Digital” is set to “D-PCM”.
The default setting is indicated in bold print.
Standard
Normally select this position.
TV
Makes the low sounds clear even if you turn the volume down.
• 48kHz/96kHz PCM
Selects the sampling frequency of the audio signal.
The default setting is indicated in bold print.
48kHz/16bit
The audio signals of DVD VIDEOs are always converted to
48 kHz/16 bit.
96kHz/24bit
All types of signals including 96 kHz/24 bit are output in their
original format. However, if the signal is encrypted for copyright
protection purposes, the signal is only output as 48 kHz/16 bit.
Notes
•
If you select the surround setting while playing a DVD, the player does not output the
following signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack.
– Dolby Digital signals (when you set “Dolby Digial” to “D-PCM” in “OPTIONS AUDIO”
menu)
– MPEG audio signals
•
If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
•
•
Even if you set “48kHz/96kHz PCM” to “96kHz/24bit”, the sampling frequency is converted
The analog audio signals from AUDIO OUT L/R jacks are not affected by “48kHz/96kHz
PCM” setting and keep their original sampling frequency level.
64 Audio Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Setup
“Réglage de L’écran” allows you to set the
screen according to the playback and
connection conditions.
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
SET UP
REGLAGE DU DVD
1
mode, then press V/v to select
(DVD)
Réglage de la langue
Options Audio
Réglage de L’écran
Cont. Parental
and press ENTER.
V v
ENTER
ENTER RETURN SET UP
Press V/v to select “Réglage de L’écran”, then
REGLAGE DE L’ECRAN
[ 4:3 Letter Box ]
2
3
press ENTER.
Type TV
ENTER
DVD LINE1 RVB Out
DVD S-Video Out
[ Non ]
[ Oui ]
V v B b
RETURN SET UP
Press V/v to select the setup item from the displayed list:
“Type TV”, “DVD LINE1 RVB Out” or “DVD S-Video Out”.
ENTER
continued
Screen Setup 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to select an item.
4
5
ENTER
Press SET UP to exit the menu.
SET UP
Menu choices
• Type TV
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
4:3 Pan Scan
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
4:3 Letter Box
4:3 Pan Scan
16:9
• DVD LINE1 RVB Out
Selects the method of outputting video signals from the LINE-1 (EURO AV) jack on
the rear panel of the player.
The default setting is indicated in bold print.
Non
Select this to not output RGB signals.
Select this to output RGB signals.
Oui
• DVD S-Video Out
Selects whether or not to output S video signals from the S-VIDEO OUT jack on the
rear panel of the player.
The default setting is indicated in bold print.
Oui
Select this when the player is connected to a TV with S VIDEO
input jack.
Non
Select this when the player is connected to a TV lacking S VIDEO
input jack.
66 Screen Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
Playback settings stored in the disc take priority over the “REGLAGE DU DVD” menu
settings and not all the functions described may work.
•
Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan
Scan” or vice versa.
•
•
The connection using S-VIDEO OUT jack is only for the DVD player.
When you select “Oui” in the “DVD LINE1 RVB Out” setting, “DVD S-Video Out” is set to
“Non” automatically.
•
When you select “Oui” in the “DVD S-Video Out” setting, “DVD LINE1 RVB Out” is set to
“Non” automatically.
Screen Setup 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the display or sound track
language
You can set various languages for the disc’s
menu, sound track or subtitle.
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
SET UP
REGLAGE DU DVD
1
mode, then press V/v to select
(DVD) and
Réglage de la langue
Options Audio
Réglage de L’écran
Cont. Parental
press ENTER.
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Réglage de la langue”,
then press ENTER.
REGLAGE DE LA LANGUE
2
3
Menu DVD
Audio
Sous-Titre
: Français
: Originale
: Français
ENTER
The “REGLAGE DE LA LANGUE” menu
appears.
V v
RETURN SET UP
Press V/v to select the language setup item from the displayed list:
“Menu DVD”, “Audio”, or “Sous-Titre”.
Then press ENTER.
ENTER
68 Setting the display or sound track language
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the desired language, then press ENTER.
4
• LANGUE DE MENU DVD
LANGUE DE MENU DVD
ENTER
You can select the desired language for the
disc’s menu.
English
Français
Deutsch
Español
Italiano
B
Menu DVD
Nederlands
Autre
V v
ENTER RETURN SET UP
• LANGUE DE LA BANDE SON
LANGUE DE LA BANDE SON
English
Switches the language of the sound track.
When you select “Originale”, the language
given priority in the disc is selected.
Français
Deutsch
Español
Italiano
Audio
Nederlands
B
Originale
Autre
V v
ENTER RETURN SET UP
• LANGUE DES SOUS-TITRES
Switches the language of the subtitle
recorded on the DVD.
LANGUE DES SOUS-TITRES
English
B
Français
Sous-Titre
Deutsch
Español
Italiano
Nederlands
Autre
V v
ENTER RETURN SET UP
Press SET UP to exit the menu.
SET UP
5
Tip
•
If you select “Autre” in step 4, an additional language menu
appears. Press V/v/B/b to select the desired language,
then press ENTER.
LANGUE DE MENU DVD
Cesky
Dansk
Magyar
Svenska
Norsk
Português
Suomi
Afrikaans
Arabic
Chinese
Greek
Hindi
Japanese
Russian
Turkish
Thai
Polski
Korean
V v B b
ENTER RETURN SET UP
Notes
•
•
•
When you select a language that is not recorded on the DVD in step 4, one of the recorded
languages will be automatically selected.
Playback settings stored in the disc take priority over the REGLAGE DU DVD settings and
not all the functions described may work.
If you change the LANGUE DE MENU DVD setting after playing the disc, press Z to open
and close the disc tray to activate the new setting, then play the disc again.
Setting the display or sound track language 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control (limiting playback by children)
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users. The parental control
function allows you to set a playback
limitation level.
Number
buttons
SET UP
m/M
H
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
SET UP
REGLAGE DU DVD
1
2
mode, then press V/v to select
(DVD)
Réglage de la langue
Options Audio
and press ENTER.
Réglage de L’écran
Cont. Parental
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Cont. Parental”, then
press ENTER.
CONTROLE PARENTAL
ENTER
Utiliser le Code
[ Non ]
B b
RETURN SET UP
70 Parental Control (limiting playback by children)
Download from Www.Somanuals.com. All Manuals Search And Download.
Press b to select “Oui”.
3
• If you have not entered a password
CREATION DU CODE
Entrer un Code Secret
ENTER
The display for registering a new password
appears.
Enter a 4-digit password using the number
buttons.
–
–
–
–
1
4
7
2
5
8
0
3
6
9
-
~
9
RETURN
The display for confirming the password
appears.
Re-enter the password.
CREATION DU CODE
Confirmer Le code Secret
–
–
–
–
-~
9
RETURN
• When you have already registered a
password
VERIFICATION DU CODE SECRET
Entrer Le Code Secret
The display for entering the password appears.
Enter a 4-digit password using the number
buttons.
-~
9
RETURN
CONTRÔLE PARENTAL
[ Oui ]
: 1
Utiliser le Code
Niveau de Contrôle
Modif. Code Secret
V v B b
ENTER RETURN SET UP
Press V/v to select “Niveau de Contrôle”, then
NIVEAU DE CONTROLE
4
5
press ENTER.
Niveau 8 Adulte
Niveau 7
ENTER
Niveau 6
Niveau 5
Niveau 4
Niveau 3
Niveau 2
Niveau 1 Tout Public
V v
ENTER RETURN SET UP
Press V/v to select the level you want, then
press ENTER.
NIVEAU DE CONTROLE
Niveau 8 Adulte
Niveau 7
ENTER
Niveau 6
The options are as follows.
Niveau 5
Niveau 4
Niveau 3
Level 8 (Adulte) y Level 7 y Level 6 y
Level 5 y Level 4 y Level 3 y Level 2
y Level 1 (Tout Public)
Niveau 2
Niveau 1 Tout Public
V v
ENTER RETURN SET UP
The lower the value, the stricter the limitation.
Press SET UP to exit the menu.
SET UP
6
continued
Parental Control (limiting playback by children) 71
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the password
1 The display for entering a new password appears.
Enter a new 4-digit password using the number buttons.
2 The display for confirming the password appears.
Re-enter the new password.
3
To turn off the Parental Control function
To play a disc for which Parental Control is set
Insert the disc, then press H.
1 The display for entering your password appears.
Enter your 4-digit password using the number buttons.
2 The player starts playback.
If you forget your password
Remove the disc and turn off the DVD-VCR.
1
2
Turn on the DVD-VCR again with no disc in the unit.
Hold down m and M on the front panel simultaneously for 5 seconds.
3 “Reset OK” appears on the screen.
Turn off the DVD-VCR.
4 The password is cleared.
5
Notes
•
When you play DVDs which do not have the Parental Control function, playback cannot be
limited on this player.
•
•
All the ratings higher than the level you select will be blocked.
Write your password down and keep it in a safe place in case you forget it.
72 Parental Control (limiting playback by children)
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Additional Operations
Using the DVD’s menu
A DVD is divided into long sections of a
picture or a music feature called “titles”.
When you play a DVD which contains
several titles, you can select the title you
want using the TOP MENU button.
Number
buttons
When you play DVDs that allow you to
select items such as the language for the
subtitles and the language for the sound,
select these items using the MENU button.
x
V/v/B/b
ENTER
MENU
TOP
MENU
Press TOP MENU or MENU.
1
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to disc.
TOP MENU
MENU
Press V/v/B/b to select the item you want to play or change.
2
You can also use the number buttons to select the item.
ENTER
1
4
7
2
5
8
0
3
6
9
continued
Using the DVD’s menu 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ENTER.
3
ENTER
To turn off the DVD’s menu
Press x.
Note
•
Depending on the DVD, you may not be able to use the TOP MENU button.
74 Using the DVD’s menu
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming into a scene
You can zoom into a scene during playback
or still mode.
ZOOM
To zoom into a JPEG image, see “Playing
V/v/B/b
ENTER
Press ZOOM.
MUTING/
ZOOM
1
“
” appears.
Press V/v/B/b to move “ ” to the position where you want to zoom in.
2
3
ENTER
Press ENTER repeatedly to change the magnification.
Each time you press the button, the magnification changes as shown below.
2× t 4× t 2× t normal magnification
ENTER
Notes
•
•
You cannot use 4× magnification when you play VIDEO CDs.
The zoom function may not work depending on the DVD.
Zooming into a scene 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the angles
If various angles (multi-angles) for a scene
ANGLE
are recorded on the DVD, “ ” appears in
the display when you press ANGLE during
playback. This means that you can change
the viewing angle.
B/b
ANGLE/
SQPB
Press ANGLE during playback.
1
The angle number appears on the display.
The number after the slash indicates the total
number of angles.
Press B/b repeatedly to select the angle number.
2
The scene changes to the selected angle.
ENTER
Note
•
Depending on the DVD, you may not be able to change the angles even if multi-angles are
recorded on the DVD.
76 Changing the angles
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the subtitle
If subtitles are recorded on the disc, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
SUBTITLE
V/v/B/b
SUBTITLE/
TIMER
Press SUBTITLE during playback.
Oui
FRA
1
Press B/b repeatedly to select the language.
2
Depending on the DVD, the choice of language varies.
ENTER
of the language.
Press V/v repeatedly to select “Oui”.
3
ENTER
To turn off the subtitles
Select “Non” in step 3.
Note
•
Depending on the DVD, you may not be able to change the subtitles even if multilingual
subtitles are recorded on the DVD. You also may not be able to turn them off.
Displaying the subtitle 77
Download from Www.Somanuals.com. All Manuals Search And Download.
Various play mode functions (Programme
play, Shuffle play, Repeat play)
You can set the following play modes:
Note
•
The play mode is cancelled when:
– you open the disc tray
– the player enters standby mode by pressing [/1.
Creating your own programme (Programme play)
You can play the contents of a disc in the
order you want by arranging the order of the
tracks on the disc to create your own
programme. You can programme up to 20
tracks.
CLEAR
PROGRAM
H
V/v/B/b
ENTER
Press PROGRAM when the DVD player is in
REPEAT/
PROGRAMMATION B b ALEATOIRE
1
PROGRAM
stop mode.
ENTER
RETURN
78 Various play mode functions (Programme play, Shuffle play, Repeat play)
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to select “PROGRAMMATION”,
PROGRAMMATION 01
Ordre Programme
2
3
then press ENTER.
Plage
ENTER
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
V v B b
–– –– ––
–– –– –– ––
–– –– –– ––
–– –– –– ––
–– –– –– ––
RETURN
CLEAR ENTER
Press V/v/B/b to select the track number you
want to programme, then press ENTER.
PROGRAMMATION 02
Ordre Programme
Plage
ENTER
01 02 03 04
05 06 07 08
09 10 11 12
13 14 15 16
V v B b
01
–– ––
–– –– –– ––
–– –– –– ––
–– –– –– ––
–– –– –– ––
RETURN
CLEAR ENTER
To programme other tracks, repeat step 3.
4
5
The programmed track numbers are displayed in the selected order.
Press H to start programme play.
Programme play starts.
When the programme ends, you can restart the same programme again by
pressing H.
To stop programme play
Press CLEAR during programme play.
To change or cancel a programme
1
Press CLEAR.
2 The last programmed number is cancelled.
Follow step 3 for new programming.
3
continued
Various play mode functions (Programme play, Shuffle play, Repeat play) 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in random order (Shuffle play)
You can shuffle the playback order of tracks.
Subsequent “shuffling” may produce a
different playing order.
CLEAR
PROGRAM
B/b
ENTER
Press PROGRAM when the DVD player is in
REPEAT/
PROGRAMMATION B b ALEATOIRE
1
PROGRAM
stop mode.
ENTER
RETURN
Press B/b to select “ALEATOIRE”, then press
ENTER.
PROGRAMMATION B b ALEATOIRE
2
ENTER
ENTER
RETURN
To return to normal play
Press CLEAR during shuffle play.
80 Various play mode functions (Programme play, Shuffle play, Repeat play)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing repeatedly (Repeat play)
You can play all of the titles or tracks on a
disc or a single title, chapter, or track
repeatedly.
CLEAR
REPEAT
Press REPEAT during playback.
REPEAT/
PROGRAM
Non
1
Press REPEAT to select the item to be repeated.
REPEAT/
PROGRAM
2
When playing a DVD
• Chapter: repeats the current chapter.
• Title: repeats the current title on a disc.
When playing a VIDEO CD or CD
• Track: repeats the current track.
• Disc: repeats all of the tracks.
When playing a DATA CD (MP3 audio)
• Track: repeats the current track.
To return to normal play
Select “Non” in step 2 or press CLEAR during repeat play.
Tip
•
When playing a DATA CD, press REPEAT again to cancel repeat play.
Various play mode functions (Programme play, Shuffle play, Repeat play) 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the sound
When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, MPEG
or DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also change the language.
AUDIO
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
B/b
Press AUDIO during playback.
AUDIO
1
FRA
Press B/b repeatedly to select the desired language/audio setting.
2
• When playing a DVD
ENTER
Depending on the DVD, the choice of language varies.
abbreviation of the language.
• When playing a VIDEO CD or CD
The default setting is indicated in bold print.
Stereo
Gauche
Droite
The standard stereo sound
The sound of the left channel (monaural)
The sound of the right channel (monaural)
82 Changing the sound
Download from Www.Somanuals.com. All Manuals Search And Download.
Virtual surround setting
When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy
surround sound effects by using sound
imaging to create virtual rear speakers from
the sound of the front speakers without using
actual rear speakers.
SURROUND
This function is designed to work with the
OUT AUDIO L/R jacks.
Press SURROUND during playback.
SURROUND
Non
1
Press SURROUND repeatedly to select “Oui”.
SURROUND
2
To cancel the setting
Select “Non” in step 2.
continued
Virtual surround setting 83
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
•
Surround effects cannot be obtained for DTS or linear PCM.
When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
•
•
•
When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby
Digital” to “Dolby Digital” or “DTS” to “Oui” in “OPTIONS AUDIO” menu, sound will
come from your speakers but it will not have the surround effect.
•
Certain audio features of this product manufactured under a license from Desper Products,
Inc. Spatializer®, VBX™ and the circle-in-square device are trademarks owned by Desper
Products, Inc.
84 Virtual surround setting
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an MP3 audio track
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
Z
./>
H
x
V/v/B/b
ENTER
O RETURN
Press Z and place a DATA CD on the disc tray,
then press Z to close the tray.
1
Sélectionnez le type de media
1
2
MP3
JPEG
When you load a DATA CD which contains
MP3 audio tracks and JPEG image files,
“Sélectionnez le type de media” menu appears.
V v
ENTER
If you load a DATA CD which contains only
MP3 audio files, the MP3 display appears.
Then you can skip step 2.
Press V/v to select “MP3”, then press
ENTER.
MP3
Total: 12
2
1 plage1
2 plage2
3 plage3
4 plage4
5 plage5
ENTER
plage1
V v b
SET UP
ENTER RETURN
continued
Playing an MP3 audio track 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v then press ENTER, or press ./> to select the desired
3
track.
ENTER
The selected track starts playing.
When a track or album is being played, its title is shaded. The playing track
number appears on the display window.
To change the album, press O RETURN.
MP3
4
5
album1
RETURN
album2
album3
plage1
V v b
SET UP
ENTER RETURN
Press V/v to select an album, then press
ENTER.
MP3
Total: 12
1 plage1
2 plage2
3 plage3
4 plage4
5 plage5
ENTER
The list of tracks contained in the album
appears.
plage1
To select a track, repeat step 2.
V v b
SET UP
ENTER RETURN
To go to the next or previous page
Press b or B.
To return to the previous display
Press O RETURN.
To turn off the display
Press x, then press O RETURN repeatedly.
Notes
•
Only the letters in the alphabet and numbers can be used for album or track names. Anything
else is displayed as an asterisk.
•
•
Up to 8 alphanumeric characters can be displayed for album or track names.
ID3 tags cannot be displayed.
About MP3 audio tracks
You can play MP3 audio tracks on CD-ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the
player to recognize the tracks.
You can also play discs recorded in Multi Session.
See the instructions of the CD-R/RW device or recording software (not supplied) for
details on the recording format.
86 Playing an MP3 audio track
Download from Www.Somanuals.com. All Manuals Search And Download.
To play a Multi Session CD
This player can play Multi Session CDs when an MP3 audio track is located in the
first session. Any subsequent MP3 audio tracks, recorded in the later sessions, can
also be played back. When audio tracks and images in music CD format or video CD
format are recorded in the first session, only the first session will be played back.
Notes
•
If you put the extension “.MP3” to data not in MP3 format, the player cannot recognize the
data properly and will generate a loud noise which could damage your speaker system.
•
•
The player cannot play audio tracks in MP3PRO format.
This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling
frequency of 44.1 kHz. Attempting to play MP3 audio tracks recorded with different
specifications may result in loud noise, sound skipping or speaker damage.
•
Depending on the disc, playback may take some time to start.
The Playback order of MP3 audio tracks
The playback order of albums and tracks recorded on a DATA CD is as follows.
• Structure of disc contents
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
ROOT
album
plage
When you insert a DATA CD and press H, the numbered tracks are played
sequentially, from 1 through 7. Any sub-albums/tracks contained within a currently
selected album take priority over the next album in the same tree. (Example: C
contains D so 4 is played before 5.)
albums are arranged in the following order: A t B t C t D t F t G.
Albums that do not contain tracks (such as album E) do not appear in the list.
continued
Playing an MP3 audio track 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
•
If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be
played in that order.
•
A disc with many trees takes longer to start playback. Some discs with many trees cannot be
played back.
Notes
•
•
•
Depending on the software you use to create the DATA CD, the playback order may differ
from the illustration above.
The playback order above may not be applicable if there are more than a total of 200 albums
and tracks in the DATA CD.
The player can recognize up to 100 albums (the player will count just albums, including
albums that do not contain MP3 audio tracks). The player will not play any albums beyond
the first 100 albums. Of the first 100 albums, the player will play no more than a combined
total of 200 albums and tracks.
88 Playing an MP3 audio track
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing JPEG image files
You can play JPEG image files on DATA
CDs (CD-ROMs/CD-Rs/CD-RWs).
Z
./>
H
x
V/v/B/b
ENTER
MENU
TOP MENU
DISPLAY
Press Z and place a DATA CD on the disc tray,
then press Z to close the tray.
1
Sélectionnez le type de media
1
2
MP3
JPEG
When you load a DATA CD which contains
MP3 audio tracks and JPEG image files,
“Sélectionnez le type de media” menu appears.
V v
ENTER
If you load a DATA CD which contains only
JPEG image files, the “Album” display
appears. Then you can skip step 2.
Press V/v to select “JPEG”, then press
2
ENTER.
ENTER
The “Album” display will appears.
If you do not press ENTER after selecting a
media type, the selected media will be
automatically played.
SLIDE SHOW
continued
Playing JPEG image files 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ./> to select the next/previous album page, then press V/v/
B/b to select an image in the “Album” display.
3
To display the selected image
1
Press ENTER.
The selected image number appears in the
display window.
ENTER
2
To display the next/previous image, press
./>.
To play the Slide show
: Fast
: Normal
: Slow
1
Press H.
You can also play the Slide show using the
menu on the selected image.
Intervalle
2
Press B/b to select the desired playing
speed on the “Intervalle” menu, then press
ENTER.
Slide show starts from the selected image.
To rotate an image
Press V/v/B/b to select an image in the “Album”
1 display, then press ENTER.
Press B/b to select “
”, then press ENTER.
2 Each time you press ENTER, the image turns
clockwise by 90°.
To zoom in an image
Press V/v/B/b to select an image in the “Album”
1 display, then press ENTER.
Press B/b to select “ ”, then press ENTER.
2 “
” appears.
Press V/v/B/b to move “ ” to the position where
3 you want to zoom in.
Press ENTER repeatedly to change the
4 magnification. Each time you press ENTER, the
magnification changes as shown below.
2× t normal magnification
90 Playing JPEG image files
Download from Www.Somanuals.com. All Manuals Search And Download.
To enjoy the Slide show
Press V/v/B/b to select an image in the “Album”
RETURN
Intervalle
1 display, then press ENTER.
Press B/b to select “
”, then press ENTER.
2 The “Intervalle” menu appears.
Press B/b to select the desired playing speed, then
3 press ENTER.
Slide show starts.
To turn on/off the menu in the single image display
Press DISPLAY in the single image display.
To return to the “Album” display
Press DISPLAY to turn on the menu and press B/b to select “
”, then press
ENTER. You can also use MENU button to return to the “Album” display. Press
. repeatedly to return to the first “Album” page.
To return to the “Sélectionnez le type de media” menu
Press x twice, then press TOP MENU.
Notes
•
•
•
Slide show can play in only one direction.
You cannot rotate or zoom in the image during Slide show.
If you select “ ” in the rotated image display, the images in the “Album” display will also
be rotated. Correct the rotation in the single image display.
About JPEG image files
You can play JPEG image files on CD-ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the
player to recognize the files.
You can also play discs recorded in Multi Session.
See the instructions of the CD-R/RW device or recording software (not supplied) for
details on the recording format.
To play a Multi Session CD
This player can play Multi Session CDs when an JPEG image file is located in the
first session. Any subsequent JPEG image files, recorded in the later sessions, can
also be played back. When audio tracks and images in music CD format or video CD
format are recorded in the first session, only the first session will be played back.
continued
Playing JPEG image files 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in
that order.
•
Notes
•
•
•
The system can play the extension “.JPG” or “.JPEG”.
Some CD-Rs or CD-RWs cannot be played on this system depending on file format.
If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, the display will be
blank.
•
Depending on the disc or the size of image files, playback may take some time to start.
92 Playing JPEG image files
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing VIDEO CDs with “MENU OUI/NON”
functions
The PBC (Playback control) function allows
you to search and perform other operations
interactively. PBC playback follows a
Number
buttons
selection menu displayed on your TV screen.
The “MENU OUI” function is the PBC
function.
H
V/v
ENTER
O RETURN
MENU
Start playing a VIDEO CD with “MENU OUI”.
1
2
The menu for your selection appears.
Press V/v to select the item number you want.
You can also use the number buttons to select the item number and track.
ENTER
1
4
7
2
5
8
0
3
6
9
continued
Playing VIDEO CDs with “MENU OUI/NON” functions 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ENTER.
3
4
ENTER
Follow the instructions in the menu for interactive operations.
Refer to the instructions supplied with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To return to the menu
Press O RETURN.
To play using “MENU NON”
Press MENU to select “MENU NON”.
When “MENU NON” is selected, the DVD player starts continuous play. You cannot
play still pictures such as a menu.
To return to “MENU OUI”, press MENU to select “MENU OUI”.
Tip
•
Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in
the instructions supplied with the disc. In this case, press H.
94 Playing VIDEO CDs with “MENU OUI/NON” functions
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Additional Operations
Playing a tape with SQPB function
The SQPB (Super VHS Quasi Playback)
function is only for playing a Super VHS
format tape.
SQPB
H
Insert a Super VHS format tape.
1
Press H.
2
ANGLE/
SQPB
Press SQPB to start SQPB.
3
Notes
•
•
You cannot use the SQPB function for recording.
The playback display will be distorted if you use the SQPB function with a normal VHS
format tape.
•
•
When you eject the tape, the VCR automatically returns to normal mode.
Playback of tapes recorded in EP (Extended Play) mode on an NTSC system is not
guaranteed.
Playing a tape with SQPB function 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Timer Recording
After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
z REC
x
REC
While recording, press z REC.
1
2
REC
Press z REC repeatedly to set the duration time.
In SP mode
Each press advances the time in increments of 30 minutes.
Normal recording
0:30
1:00
4:00
4:30
In LP mode
Each press advances the time as shown below.
0:30 1:00
8:00 9:00
Normal recording
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording.
96 Quick Timer Recording
Download from Www.Somanuals.com. All Manuals Search And Download.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the indicator disappears and the VCR returns to
normal recording mode.
To stop while recording
Press x.
Note
•
You cannot display the current tape time in the display window when setting the recording
duration time.
Quick Timer Recording 97
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual
programmes
In the ZWEITON (German stereo) system
This VCR automatically receives and records stereo and bilingual programmes based
on the ZWEITON system. When a stereo or bilingual programme is received, the
STEREO indicator appears in the display window.
To select bilingual sound while recording
Press AUDIO to select the sound you want.
To listen to
Main
On-screen display
PRINCIPALE
SECONDAIRE
PRINCIP./SEC.
MONO
Display window
STEREO
Sub
STEREO
Main and sub
Standard sound∗
STEREO
STEREO
∗ Usually the main channel heard from both the left and right in bilingual programmes
To select stereo programme while recording
To listen to
Stereo
On-screen display
STEREO
Display window
STEREO
Left channel
Right channel
Standard sound∗
CANAL G
STEREO
CANAL D
STEREO
CANAL G + CANAL D
STEREO
∗ Usually the mixed sound of left and right channels in stereo programmes
In the NICAM system
This VCR receives and records stereo and bilingual programmes based on the
NICAM system (NICAM appears on the TV screen). When a stereo or bilingual
programme is received, the STEREO indicator appears in the display window.
To record a NICAM programme, “NICAM” in the “REGLAGES UTILISATEUR”
for details.
98 Recording stereo and bilingual programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
To select the sound while recording
Press AUDIO to select the sound you want.
Stereo programmes
To listen to
Stereo
On-screen display
Display window
STEREO
NICAM, STEREO
NICAM, CANAL G
NICAM, CANAL D
Left channel
STEREO
Right channel
Left and right channels∗
STEREO
NICAM, CANAL G +
CANAL D
STEREO
∗ Usually the mixed sound of left and right channels
Bilingual programmes
To listen to
Main
On-screen display
NICAM, PRINCIPALE
NICAM, SECONDAIRE
NICAM, PRINCIP./SEC.
NICAM, MONO
Display window
STEREO
Sub
STEREO
Main and sub
Standard sound∗
STEREO
STEREO
∗ Usually the main sound (monaural)
Selecting the sound during Hi-fi playback
Press AUDIO to select the sound you want.
To listen to
Stereo
On-screen display
STEREO
Display window
STEREO
Left channel
Right channel
Mix sound∗
Mono sound
CANAL G
CANAL D
MIX
STEREO
STEREO
STEREO
MONO
No indicator
∗ The mixed sound of left and right channels, and the normal mono audio track
continued
Recording stereo and bilingual programmes 99
Download from Www.Somanuals.com. All Manuals Search And Download.
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Stereo
Usually mixed
Bilingual
Usually main sound
left/right channels
Normal audio track
(monaural)
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Main (left channel)
Sub (right channel)
Notes
•
To listen to playback sounds in stereo, you must use the PERITEL or AUDIO OUT
connections.
•
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
100 Recording stereo and bilingual programmes
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using index function
The VCR automatically marks the tape with
an index signal at the point where each
recording begins. Use these signals as
references to find a specific recording.
INDEX
m/M
H
x
To find a specific recording by scanning (Index scan)
Insert an indexed tape into the tape compartment.
1
Press INDEX, then press m/M. The
VCR starts scanning each recording for five
seconds in the corresponding direction.
INDEX
2
INDEX BALAYAGE : B B
Press H to start playback when you find the desired point.
3
continued
Searching using index function 101
Download from Www.Somanuals.com. All Manuals Search And Download.
To search a specific recording (Index search)
Insert an indexed tape into the VCR.
1
Press INDEX, then press m/M twice.
2
INDEX
• To search ahead, press M twice.
INDEX RECHERCHE : B B +01
• To search backwards, press m twice.
Press m/M depending on the direction where your desired programme
3
4
is located.
Each time you press the button, the number increases or decreases up to
±20, respectively.
The VCR starts searching, and playback starts automatically from that
point.
To stop searching
Press x.
Note
•
No index signal will be added when recording starts from recording pause. However, an
index signal will be marked if you change the programme position during recording pause.
102 Searching using index function
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture (tracking)
Adjusting the tracking
Although the VCR automatically adjusts the
tracking when playing a tape, distortion may
occur if the recording is in poor condition. In
this case, manually adjust the tracking.
ALIGN.
–
– – – – –
–
–
–
–
–
–
During playback, press TRACKING +/– to
display the tracking meter. The distortion
should disappear as you press one of the two
buttons. To resume automatic tracking
adjustments, eject the tape and re-insert it.
Tracking meter
Adjusting the picture
sharpness (Smart trilogic)
SET UP
You can automatically adjust the sharpness of
the picture.
V/v/B/b
ENTER
O RETURN
During playback, press SET UP, then press
SET UP
OPTION
1
V/v to select
(OPTION) and press
:Français
Langue
L’horloge
ENTER.
Installation
Réglages Utilisateur
Veille Auto
Messages Ecran
[ Non ]
[ Oui ]
ENTER
V v
ENTER RETURN SET UP
continued
Adjusting the picture (tracking) 103
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Réglages Utilisateur”,
REGLAGES UTILISATEUR
2
3
4
then press ENTER.
Syst. Couleur
NICAM
[ Auto ]
[ Oui ]
[ Oui ]
ENTER
ENTER
ENTER
Smart Trilogic
Etendre ShowView [ Non ]
V v B b
RETURN SET UP
Press V/v to select “Smart Trilogic”, then
press b.
REGLAGES UTILISATEUR
Syst. Couleur
NICAM
[ Auto ]
[ Oui ]
[ Oui ]
Smart Trilogic
Etendre ShowView [ Non ]
V v B b
RETURN SET UP
Press V/v to set “SMART TRILOGIC” to
“OUI” or “NON”.
IMAGE
SMART TRILOGIC : OUI
CONTRASTEE
• OUI: Picture sharpness is automatically
adjusted.
DOUCE
– – – – – – – – – – * – – – – – – – – –
• NON: Adjust the picture sharpness
manually.
RETURN
OUI / NON : v V
To soften the picture, press B.
To sharpen the picture, press b.
Press O RETURN to return to the original screen.
5
RETURN
104 Adjusting the picture (tracking)
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing menu options
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
mode, then press V/v to select
SET UP
OPTION
:Français
1
2
Langue
L’horloge
(OPTION) or
(VIDEO) and press
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
ENTER.
Messages Ecran
V v
ENTER
ENTER RETURN SET UP
REGLAGE DE LA FONCTION VIDEO
Sélect. Cassette
Répétion Totale
[ E180 ]
[ Non ]
V v B b
RETURN SET UP
Press V/v to select the option to change.
REGLAGE DE LA FONCTION VIDEO
Sélect. Cassette
Répétion Totale
[ E180 ]
[ Non ]
ENTER
V v B b
RETURN SET UP
continued
Changing menu options 105
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to change the setting.
3
4
ENTER
Press SET UP to exit the menu.
SET UP
Menu choices
The default settings are indicated in bold print.
OPTION
Menu option
Set this option to
Veille Auto
•
•
“Non” to deactivate the Auto Power Off function.
“1Heures”/“2Heures”/“3Heures” to turn the DVD-VCR off
automatically if no signal is received and you do not press any
of the buttons during this time.
Messages Ecran
•
•
“Oui” to display the menu on the TV screen.
“Non” to disappear the menu from the TV screen.
VIDEO SETUP
Menu option
Set this option to
Sélect. Cassette
•
•
•
•
“E180” to use an E-180 or shorter type tape.
“E240” to use an E-240 type tape.
“E260” to use an E-260 type tape.
“E300” to use an E-300 type tape.
Répétion Totale
•
•
“Oui” to play back a tape repeatedly. The VCR rewinds a tape
to the beginning and restarts playback automatically.
“Non” to turn off Auto repeat.
106 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
How to connect to record on this VCR
Connect the line outputs of the other VCR to the input connector of this VCR. Refer to the
examples A through C and choose the connection that best suits your VCR.
Example A
TV
Your VCR (Recorder)
LINE-1 (EURO AV)
Other VCR (Player)
PERITEL
PERITEL cable (not supplied)
: Signal flow
Example B
TV
Your VCR (Recorder)
LINE-2 IN t/o L/R
Other VCR (Player)
SORTIE
LIGNE
audio/video cord
(not supplied)
: Signal flow
continued
Editing 107
Download from Www.Somanuals.com. All Manuals Search And Download.
Example C
Your VCR (Recorder)
TV
LINE-3
Other VCR (Player)
PERITEL
PERITEL cable (not supplied)
: Signal flow
How to connect to a stereo system
Connect the LINE-2 IN t/o L/R jacks on this DVD-VCR to the audio output jacks on the
stereo system, using an audio cable (not supplied).
Notes
•
•
•
Make sure you connect the plugs to jacks of the same colour.
If the other VCR is a monaural type, leave the red plugs unconnected.
If you connect this VCR to both the LINE IN and LINE OUT jacks of the other VCR, select
the input correctly to prevent a humming noise.
•
When you connect another VCR to the LINE-3 or LINE-2 connector, press INPUT SELECT
to display “L3” or “L2” in the display window.
108 Editing
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (when recording on this VCR)
Before you start editing
• Turn on your TV and set it to the video
channel.
• Press INPUT SELECT to display the
connected line in the display window.
• Press SP/LP to select the tape speed, SP or
LP.
X x z REC
• Press SELECT VIDEO to control the
VCR.
Insert a source tape with its safety tab removed into the other (playback)
VCR. Search for the point to start playback and set it to playback pause.
1
2
Insert a tape with its safety tab in place into this (recording) VCR. Search
for the point to start recording and press X to set it to playback pause.
REC
Press z REC on this VCR to set it to recording pause.
3
4
To start editing, press the X (pause) buttons on both VCRs at the same time.
To stop editing
Press the x (stop) buttons on both VCRs.
Tip
•
To cut out unwanted scenes while editing, press X on this VCR when an unwanted scene
begins. When it ends, press X again to resume recording.
Editing 109
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
General setup information
Changing setup options
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
mode, then press V/v to select
(OPTION) and press ENTER.
SET UP
OPTION
:Français
1
Langue
L’horloge
Installation
Réglages Utilisateur
Veille Auto
[ Non ]
[ Oui ]
Messages Ecran
ENTER
V v
ENTER RETURN SET UP
Press V/v to select “Réglages Utilisateur”,
REGLAGES UTILISATEUR
2
then press ENTER.
Syst. Couleur
NICAM
[ Auto ]
[ Oui ]
[ Oui ]
ENTER
The “REGLAGES UTILISATEUR” menu
Smart Trilogic
Etendre ShowView [ Non ]
appears.
V v B b
RETURN SET UP
Press V/v to select the option to change.
3
ENTER
110 General setup information
Download from Www.Somanuals.com. All Manuals Search And Download.
Press B/b to change the setting.
4
5
ENTER
Press SET UP to exit the menu.
SET UP
Menu choices
Initial settings are indicated in bold print.
Menu option
Set this option to
Syst. Couleur
•
•
•
“Auto” to select the colour system automatically.
“PAL” to use the tape recorded in the PAL colour system.
“SECAM” to use the tape recorded in the SECAM colour
system.
•
•
“MESECAM” to use the tape recorded in the MESECAM
colour system.
“B/W” to use the tape recorded in black and white.
When using the tape recorded NTSC colour signals:
•
•
“NTPB” to play back an NTSC-recorded tape on PAL TV.
“NT4.43” to play back an NTSC-recorded tape on Multi TV.
NICAM
•
•
“Oui” to record NICAM broadcasts on the hi-fi audio track.
“Non” to record standard sound on the hi-fi audio track.
For details, see page 98.
Smart Trilogic
•
•
“Oui” to automatically adjust the sharpness of the picture.
“Non” to manually adjust the sharpness of the picture.
Etendre ShowView
•
•
“Non” to deactivate the ShowView Extend function.
10/20/30/.../60 (minutes) to extend the time of the ShowView
setting by the selected amount of time.
General setup information 111
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
service facility.
General Troubleshooting
Symptom
Remedy
The ?/1 (on/standby) switch does
•
Connect the mains lead to the mains securely.
not function.
The power is turned on but the DVD-
VCR does not operate.
•
Moisture condensation has occurred. Turn the power off,
unplug the mains lead and leave the DVD-VCR to dry for
over three hours.
The clock has stopped and “--:--”
appears in the display window.
•
The clock stops if the DVD-VCR is disconnected from
the mains. Reset the clock (and timer).
The remote commander does not
function.
•
•
Make sure you are pointing the remote commander at the
remote sensor on the DVD-VCR.
Replace all the batteries in the remote commander with
new ones if they are weak.
•
•
Make sure the TV / DVD·VIDEO switch is set correctly.
Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
The tracking meter does not appear
on the screen.
•
•
The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other TVs.
Set your TV’s code number. The code number may
change when you replace the batteries of the remote
commander.
DVD Troubleshooting
Symptom
Remedy
There is no picture/picture noise
appears.
•
•
•
Re-connect the connecting cord securely.
The connecting cords are damaged.
the input selector on your TV so that the signal from the
player appears on the TV screen.
•
•
The disc is dirty or flawed.
If the picture output from your player goes through your
VCR to get to your TV or if you are connected to a
combination TV/VIDEO player, the copy-protection
signal applied to some DVD programmes could affect
picture quality. If you still experience problems even
when you connect your player directly to your TV, please
try connecting your player to your TV’s S VIDEO input
112 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
Even though you set the aspect ratio
in “Type TV” of the “REGLAGE DE
L’ECLAN” menu the picture does
not fill the screen.
•
The aspect ratio of the disc is fixed on your DVD.
There is no picture from your VCR
connected to the LINE IN jacks.
•
The DVD player must be in standby mode to view
pictures from your VCR.
There is no sound.
•
•
•
Re-connect the connecting cord securely.
The connecting cord is damaged.
The player is connected to the wrong input jack on the
•
•
The amplifier (receiver) input is not correctly set.
The player is in pause mode or in Slow-motion Play
mode.
•
•
The player is in fast forward or fast reverse mode.
If the audio signal does not come through the DIGITAL
AUDIO OUT (OPTICAL or COAXIAL) jack, check the
audio settings (page 62).
Sound is noisy.
•
•
When playing a CD with DTS sound tracks, noise will
DIGITAL OUT (OPTICAL or COAXIAL) jack.
The sound volume is low.
The disc does not play.
The sound volume is low on some DVDs. The sound
volume may improve if you set “Audio DRC” to “TV”
•
•
The disc is turned over.
Insert the disc with the playback side facing down on the
disc tray.
•
•
•
•
•
The disc is skewed.
The player cannot play certain discs (page 6).
The region code on the DVD does not match the player.
Moisture has condensed inside the player.
The player cannot play CD-Rs, CD-RWs, DVD-Rs or
•
•
Make sure the TV / DVD·VIDEO switch is set correctly.
Select correctly VIDEO or DVD with SELECT DVD/
VIDEO button.
The MP3 audio track cannot be
played (page 85).
•
The DATA CD is not recorded in the MP3 format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
•
•
The MP3 audio track does not have the extension “.MP3”.
The data is not formatted in MP3 even though it has the
extension “.MP3”.
•
•
The data is not MPEG1 Audio Layer 3 data.
The player cannot play audio tracks in MP3PRO format.
The JPEG image file cannot be
played.
•
•
•
•
The DATA CD is not recorded in JPEG format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
The JPEG image file does not have the extension “.JPG”
or “.JPEG”.
The data is not formatted in JPEG even though it has the
extension “.JPG” or “.JPEG”.
Length or width of the image is more than 4720 dots.
continued
Troubleshooting 113
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The title of the MP3 audio album or
track is not correctly displayed.
•
The player can only display numbers and alphabet. Other
characters are displayed as asterisks.
The disc does not start playing from
the beginning.
•
Programme play, shuffle play, or repeat play, has been
•
•
Resume play has taken effect (page 32).
The player starts playing the disc
automatically.
The disc features an auto playback function.
Playback stops automatically.
•
•
While playing discs with an auto pause signal, the player
stops playback at the auto pause signal.
You cannot perform some functions
such as stop, search, slow-motion
play, repeat play, shuffle play, or
programme play.
Depending on the disc, you may not be able to do some
operations. See the operating manual that comes with the
disc.
The language for the sound track
cannot be changed.
•
•
•
Try using the DVD’s menu instead of the direct selection
Multilingual tracks are not recorded on the DVD being
played.
The DVD prohibits the changing of the language for the
sound track.
The subtitle language cannot be
changed or turned off.
•
•
Try using the DVD’s menu instead of the direct selection
Multilingual subtitles are not recorded on the DVD being
played.
•
•
The DVD prohibits the changing of the subtitles.
The angles cannot be changed.
Try using the DVD’s menu instead of the direct selection
•
•
Multi-angles are not recorded on the DVD being played.
The DVD prohibits changing of the angles.
The player does not operate properly.
•
When static electricity, etc., causes the player to operate
abnormally, unplug the player.
114 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Troubleshooting
Symptom
Remedy
The playback picture does not appear
on the TV screen.
•
Make sure the TV is set to the channel for the VCR. If
you are using a monitor, set it to video input.
If the VCR is connected to the TV with the PERITEL
cable, make sure the VCR indicator is lit in the display
window. Use the TV/VIDEO button on the remote
commander to light up the VCR indicator.
•
The picture is not clear.
•
•
Adjust the tracking with the TRACKING +/– buttons.
The video heads are dirty (see the last page of
Troubleshooting). Clean the video heads using a Sony
video head cleaning cassette. If a Sony cleaning cassette
is not available in your area, have the heads cleaned at
your nearest Sony service facility (a standard service
charge will be required). Do not use a commercially
available liquid type cleaning cassette other than Sony’s,
as it may damage the video heads.
•
•
The video heads may have to be replaced. Consult your
local Sony service facility for more information.
The picture has no colour
The “Syst. Couleur” option in the “REGLAGES
UTILISATEUR” menu is set to the wrong position. Set
the option to conform to the system that the tape was
recorded in.
The picture rolls vertically during
picture search.
•
Adjust the vertical hold control on the TV or monitor.
The picture has no sound.
•
•
The tape is defective.
If you made A/V connections, check the audio cord
connection.
The sound from a tape recorded with
the VCR is not in stereo or the
STEREO indicator in the display
window is flashing.
•
•
Adjust the tracking.
The video heads are dirty. Clean the video heads using a
Sony video head cleaning cassette as explained above.
No TV programme appears on the
TV screen.
•
•
Make sure the TV is set to the video channel. If you are
using a monitor, set it to video input.
Select the correct source with the INPUT SELECT
button. Select a programme position when recording TV
programmes; select a line input when recording from
other equipment.
TV reception is poor.
•
•
•
Make sure the aerial cable is connected securely.
Adjust the TV aerial.
Make sure “SYS. (L/L’ or B/G)” in the “RECHERCHE
MANUELLE” menu is set to the same system in your
local area.
The tape starts playing as soon as it is
inserted.
•
•
•
The safety tab has been removed. To record on this tape,
cover the tab hole.
The tape is ejected when you press
z REC.
The safety tab has been removed. To record on this tape,
cover the tab hole.
Nothing happens when you press
Make sure the tape is not at its end.
z REC.
continued
Troubleshooting 115
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The timer does not operate.
•
•
•
•
•
•
•
•
•
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a programme has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the decoder is turned on.
Check that the satellite tuner is turned on.
The clock stops if the DVD-VCR is disconnected from
the mains for more than one minute. Reset the clock and
timer.
•
Turn the power off and unplug the mains lead.
The VPS/PDC function does not
operate properly.
•
•
Check that the clock and the date are set correctly.
Check that the VPS/PDC time you set is the correct one
(there might be a mistake in the TV programme guide). If
the broadcast you wanted to record did not send the good
VPS/PDC information, the VCR will not start recording.
•
If the reception is poor, the VPS/PDC signal might be
altered and the VCR might not start recording.
You cannot watch Canal Plus
programmes when the VCR is in
standby mode.
•
•
Check that “DEC” is set to “OUI” for this channel in the
“LISTE STATIONS TV” menu.
Make sure the Canal Plus PERITEL cable is plugged
securely.
A Canal Plus programme is always
recorded scrambled.
•
•
Make sure the Canal Plus PERITEL cable is plugged
securely.
Check that “DEC” is set to “OUI” for this channel in the
“LISTE STATIONS TV” menu.
A tape cannot be inserted.
•
•
Check that a tape is not already in the tape compartment.
Press INPUT SELECT to display the connected line.
The selected input line connector
number does not appear in the
display window.
The VCR mechanism needs to be
cleaned.
•
Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent, such
as alcohol or benzine.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
terminal
contamination
116 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
DVD (page 6)
Sections of a picture or a music feature that
are smaller than titles. A title is composed of
several chapters. Depending on the disc, no
chapters may be recorded.
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same
as a CD.
The data capacity of a single-layer and
single-sided DVD is 4.7 GB (Giga Byte),
which is 7 times that of a CD. The data
capacity of a double-layer and single-sided
DVD is 8.5 GB, a single-layer and double-
sided DVD is 9.4 GB, and double-layer and
double-sided DVD is 17 GB.
The picture data uses the MPEG 2 format,
one of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/40 (average) of its
original size. The DVD also uses a variable
rate coding technology that changes the data
to be allocated according to the status of the
picture. Audio information is recorded in a
multi-channel format, such as Dolby Digital,
allowing you to enjoy a more real audio
presence.
Digital audio compression technology
developed by Dolby Laboratories. This
technology conforms to 5.1-channel
surround sound. The rear channel is stereo
and there is a discrete subwoofer channel in
this format. Dolby Digital provides the same
5.1 discrete channels of high quality digital
audio found in Dolby Digital cinema audio
systems. Good channel separation is realized
because all of the channel data are recorded
discretely and little deterioration is realized
because all channel data processing is digital.
Dolby Surround (Pro Logic) (page 59)
Audio signal processing technology that
Dolby Laboratories developed for surround
sound. When the input signal contains a
surround component, the Pro Logic process
outputs the front, centre and rear signals.
The rear channel is monaural.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided with
the DVD.
DVD-RW (page 6)
A DVD-RW is a recordable and rewritable
disc that is the same size as a DVD VIDEO.
The DVD-RW has two different modes: VR
mode and Video mode. DVD-RWs created
in Video mode have the same format as a
DVD VIDEO, while discs created in VR
(Video Recording) mode allow the contents
to be programmed or edited.
Digital audio compression technology that
Digital Theater Systems, Inc. developed.
This technology conforms to 5.1-channel
surround sound. The rear channel is stereo
and there is a discrete subwoofer channel in
this format. DTS provides the same 5.1
discrete channels of high quality digital
audio.
Good channel separation is realized because
all of the channel data is recorded discretely
and little deterioration is realized because all
channel data processing is digital.
DVD+RW (page 6)
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD
VIDEO format.
continued
Glossary 117
Download from Www.Somanuals.com. All Manuals Search And Download.
Title (page 35)
The longest section of a picture or music
feature on a DVD, movie, etc., in video
software, or the entire album in audio
software.
Track (page 35)
Sections of a picture or a music feature on a
CD or VIDEO CD (the length of a song).
118 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Inputs and outputs
Laser
LINE-1 (EURO AV)
21-pin
Semiconductor laser
Signal format system
PAL/(NTSC)
Video input: pin 20
Audio input: pins 2 and 6
Video output: pin 19
Audio output: pins 1 and 3
LINE-2 IN t/o L/R
VIDEO IN, phono jack (1)
SECAM
MESECAM
Channel coverage
SECAM (L):
VHF F2 to F10
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (2)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE-3
UHF F21 to F69
CATV B to Q
HYPER S21 to S41
PAL (B/G):
VHF E2 to E12
VHF Italian channel A to H
UHF E21 to E69
CATV S01 to S05, S1 to S20
HYPER S21 to S41
Aerial out
21-pin
Video input: pin 20
Audio input: pins 2 and 6
OUT
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
75-ohm asymmetrical aerial socket
Tape speed
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
SP: PAL
NTSC
SECAM
23.39 mm/s (recording/playback)
33.35 mm/s (playback only)
23.39 mm/s (recording/playback)
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
DIGITAL OUT (OPTICAL)
Optical output jack/–18 dBm (wave length 660 nm)
DIGITAL OUT (COAXIAL)
Phono jack/0.5 Vp-p/75 ohms
S VIDEO OUT
MESECAM 23.39 mm/s (playback only)
LP: PAL
11.70 mm/s (recording/playback)
16.67 mm/s (playback only)
NTSC
SECAM
11.70 mm/s (recording/playback)
MESECAM 1.70 mm/s (playback only)
EP: NTSC 11.12 mm/s (playback only)
Maximum recording/playback time
10 hrs. in LP mode (with E300 tape)
Rewind time
Approx. 1 min. (with E180 tape)
4-pin mini DIN/Y: 1.0 Vp-p, C: 0.3 Vp-p (PAL),
0.286 Vp-p (NTSC)/75 ohms
Timer section
Clock
Quartz locked
Timer indication
24-hour cycle
Timer setting
6 programs (max.)
continued
Specifications 119
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements
220 – 240 V AC, 50 Hz
Power consumption
25 W
Operating temperature
5° C to 40° C
Storage temperature
–20° C to 60° C
Dimensions including projecting parts and controls
(w/h/d)
SLV-D950B
Approx. 430 × 95 × 333 mm
SLV-D910B
Approx. 430 × 95 × 325 mm
Mass
Approx. 4.2 kg
Supplied accessories
Remote commander (1)
R6 (size AA) batteries (2)
Aerial cable (1)
PERITEL cable (1)
Audio cord (pinplug ×2 y pinplug ×2) (1)
Video cord (pinplug ×1 y pinplug ×1) (1)
Design and specifications are subject to change without
notice.
120 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to parts and controls
Refer to the pages indicated in parentheses ( ) for details.
Front panel
SLV-D950B
SLV-D910B
M m (rewind)/M (fast-forward) buttons
*1 Covered
*2 PROGRAM + button has a tactile dot.
Use the tactile dot as a reference when operating
the DVD-VCR.
G LINE-2 IN t/o L/R jacks*1 (107)
H PROGRAM +/– buttons*2 (41)
I
J
DIAL TIMER*3 (52)
Remote sensor (9)
*3 SLV-D950B only
continued
Index to parts and controls 121
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
C MONTH indicator∗ (52)
D DAY indicator∗ (52)
E YEAR indicator∗ (52)
F DATE indicator∗ (52)
L Playing time/clock/current status
indicator (32)
∗ SLV-D950B only
122 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander for DVD
N V/v/B/b buttons
ENTER button (14)
∗ Number 5, AUDIO and H buttons have a
tactile dot. Use the tactile dot as a reference
when operating the DVD-VCR.
124 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander for VCR
N V/v/B/b buttons
ENTER button (14)
Q PROG (programme)/TRACKING +/–
U SP (Standard Play)/LP (Long Play)
button (41)
Y m (rewind)/M (fast-forward) buttons
∗ Number 5, AUDIO, H and PROG/
TRACKING + buttons have a tactile dot. Use
the tactile dot as a reference when operating the
DVD-VCR.
Index to parts and controls 125
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Audio/Subtitle Language
Abbreviation
ARA
CHI
Language
Arabic
Chinese
Croatian
Czech
CRO
CZK
DAN
DEU
ENG
ESP
Danish
German
English
Spanish
Finish
FIN
FRA
GRE
HUN
IDN
French
Greek
Hungarian
Indonesian
Hindi
IND
ISL
Icelandic
Italian
ITA
IWR
JPN
Hebrew
Japanese
Korean
KOR
MAL
NLD
NOR
POL
POR
RUS
SVE
THA
TUR
VIE
Malay
Dutch
Norwegian
Polish
Portuguese
Russian
Swedish
Thai
Turquish
Vietnamese
Afrikaans
ZAF
126 DVD Audio/Subtitle Language
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
H
R
16:9 66
Handling discs 7
Recording 40
4:3 Letter Box 66
4:3 Pan Scan 66
Hi-fi audio track 100
quick timer recording 96
saving 42
I
using DIAL TIMER 52
using the ShowView
system 44
while watching another
A
Adjusting
Index scan 101
J
picture 103
tracking 103
Aerial hookup 11
Angle 76
Audio track 100
Auto Clock Set 13
Auto Set Up 13
Repeat play 81
Rotation 90
L
Language selecting 15
LP mode 41
S
Safety tab 42
Searching
M
Manual fine tuning 20
Monaural 99
Monitoring
during playback 99
during recording 98
C
ShowView
recording 44
Shuffle play 80
Slide show 91
Smart trilogic 103
SP mode 41
Canal Plus 27
Changing the programme
position 21
Changing the station name 25
Clock setting 16
Colour system
setting 39
Commercial Skip 38
Connecting
the DVD-VCR and your
TV 11
to video equipment 107
Counter 39
N
Subtitle 77
NICAM broadcasts 98
Normal audio track 100
T
P
Timer setting
Parental Control 70
PBC (Playback control) 93
PDC (Programme Delivery
Control) 46
Picture adjustment 103
quick timer recording 96
using DIAL TIMER 52
using the ShowView
system 44
D
Demonstration Mode 55
Dial Timer 52
Disabling the programme
positions 23
DVD 6
JPEG image files 89
MP3 audio track 85
programme play 78
repeat play 81
shuffle play 80
skip 38
Adjusting
U
Usable discs 6
V
E
VIDEO CD 6
VPS (Video Programme
System) 46
Editing 107
VIDEO CDs 93
Z
Presetting channels 18
Programme play 78
ZWEITON broadcasts 98
Index 127
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Indonesia
Download from Www.Somanuals.com. All Manuals Search And Download.
AK68-00306G
|