2-672-839-11(1)
DVD Recorder
Operating Instructions
RDR-GX330
© 2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
• To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the apparatus.
Copy guard function
Since the recorder has a copy
guard function, programs
Precautions
received through an external
tuner (not supplied) may contain
copy protection signals (copy
guard function) and as such may
not be recordable, depending on
the type of signal.
This equipment has been tested
and found to comply with the
limits set out in the EMC
Directive using a connection
cable shorter than 3 meters.
On recording
Make trial recordings before
making the actual recording.
On compensation for lost
recordings
Sony is not liable and will not
compensate for any lost
On safety
IMPORTANT NOTICE
Should any solid object or liquid
fall into the cabinet, unplug the
recorder and have it checked by
qualified personnel before
operating it any further.
Caution: This recorder is
capable of holding a still
video image or on-screen
display image on your
recordings or relevant losses,
including when recordings are
not made due to reasons
including recorder failure, or
when the contents of a recording
are lost or damaged as a result of
recorder failure or repair
undertaken to the recorder. Sony
will not restore, recover, or
replicate the recorded contents
under any circumstances.
television screen
indefinitely. If you leave the
still video image or on-
screen display image
displayed on your TV for an
extended period of time you
risk permanent damage to
your television screen.
Plasma display panels and
projection televisions are
especially susceptible to this.
On power sources
• The recorder is not
disconnected from the AC
power source as long as it is
connected to the wall outlet,
even if the recorder itself has
been turned off.
• If you are not going to use the
recorder for a long time, be
sure to disconnect the recorder
from the wall outlet. To
disconnect the AC power cord,
grasp the plug itself; never pull
the cord.
Copyrights
• Television programs, films,
video tapes, discs, and other
materials may be copyrighted.
Unauthorized recording of
such material may be contrary
to the provisions of the
If you have any questions or
problems concerning your
recorder, please consult your
nearest Sony dealer.
On placement
copyright laws. Also, use of
this recorder with cable
television transmission may
require authorization from the
cable television transmitter
and/or program owner.
• This product incorporates
copyright protection
technology that is protected by
U.S. patents and other
• Place the recorder in a location
with adequate ventilation to
prevent heat build-up in the
recorder.
• Do not place the recorder on a
soft surface such as a rug that
might block the ventilation
holes.
• Do not place the recorder in a
confined space such as a
bookshelf or similar unit.
• Do not place the recorder in a
location near heat sources, or
in a place subject to direct
sunlight, excessive dust, or
mechanical shock.
intellectual property rights.
Use of this copyright
protection technology must be
authorized by Macrovision,
and is intended for home and
other limited viewing uses
only unless otherwise
• Do not place the recorder in an
inclined position. It is
authorized by Macrovision.
Reverse engineering or
designed to be operated in a
horizontal position only.
• Keep the recorder and discs
away from equipment with
strong magnets, such as
microwave ovens, or large
loudspeakers.
disassembly is prohibited.
• Do not place heavy objects on
the recorder.
,continued
3
Download from Www.Somanuals.com. All Manuals Search And Download.
14) Refer all servicing to
qualified service personnel.
Servicing is required when
the apparatus has been
Important Safety
Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus
near water.
damaged in any way, such as
power-supply cord or plug is
damaged, liquid has been
spilled or objects have fallen
into the apparatus, the
apparatus has been exposed
to rain or moisture, does not
operate normally, or has
been dropped.
6) Clean only with dry cloth.
7) Do not block any ventilation
openings. Install in
accordance with the
manufacturer’s instructions.
8) Do not install near any heat
sources such as radiators,
heat registers, stoves, or
other apparatus (including
amplifiers) that produce
heat.
9) Do not defeat the safety
purpose of the polarized or
grounding-type plug. A
polarized plug has two
blades with one wider than
the other. A grounding type
plug has two blades and a
third grounding prong. The
wide blade or the third prong
are provided for your safety.
If the provided plug does not
fit into your outlet, consult
an electrician for
About this manual
• In this manual, “disc” is used
as a general reference for the
DVDs or CDs unless
otherwise specified by the text
or illustrations.
• Icons, such as
, listed
DVD
at the top of each explanation
indicate what kind of media
can be used with the function
being explained.
• Instructions in this manual
describe the controls on the
remote. You can also use the
controls on the recorder if they
have the same or similar
names as those on the remote.
• The on-screen display
replacement of the obsolete
outlet.
illustrations used in this
10) Protect the power cord from
being walked on or pinched
particularly at plugs,
manual may not match the
graphics displayed on your TV
screen.
convenience receptacles,
and the point where they exit
from the apparatus.
• The explanations regarding
DVDs in this manual refer to
DVDs created on this recorder.
The explanations do not apply
to DVDs that are created on
other recorders and played
back on this recorder.
11) Only use attachments/
accessories specified by the
manufacturer.
12) Use only with the cart, stand,
tripod, bracket, or table
specified by the
manufacturer, or sold with
the apparatus. When a cart is
used, use caution when
moving the cart/apparatus
combination to avoid injury
from tip-over.
13) Unplugthis apparatusduring
lightning storms or when
unused for long periods of
time.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Playable discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Hooking Up the Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Step 5: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
If you have a Sony DVD player or more than one
Step 6: Easy Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
1. Inserting a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
2. Recording a Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
Labeling a disc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Protecting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Unfinalizing a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
8. Reformatting a disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
,continued
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Unrecordable pictures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Creating chapters in a title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Playing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Playback options. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Adjusting the picture quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Playing from the beginning of the program you are recording
Playing a previous recording while making another
Erasing and Editing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Before DV/Digital8 Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Program Edit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner Preset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Video Settings (Video) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74
Audio Settings (Audio) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Recording Settings (Recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Disc Settings (DVD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Notes About This Recorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
About i.LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Guide to Parts and Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Language Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Area Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Guide to Disc Types
Recordable and playable discs
Icon used in Formatting
this manual (new discs)
Compatibility with other
DVD players (finalizing)
Type
Disc Logo
Automatically
formatted in
+VR mode
(DVD+RW
VIDEO)
Playable on DVD+RW
compatible players
(automatically finalized)
DVD+RW
+
RW
Format in VR
mode
Playable only on VR mode
compatible players
(finalization unnecessary)
VR
mode
-
RWVR
DVD-
RW
Format in
Video mode
Playable on most DVD
players (finalization
necessary) (page 35)
Video
mode
-
RWVideo
DVD+R
Automatically
formatted in
+VR mode
(DVD+R
Playable on most DVD
players (finalization
necessary) (page 35)
+
R
VIDEO)
DVD+R DL
Format in VR
mode
*1
Playable only on DVD-R in
VR mode compatible
players (finalization
VR
mode
Formatting is
performed
-
RVR
Information”
display.
DVD-R
Automatically Playable on most DVD
Video
mode
formatted in
Video mode
players (finalization
necessary) (page 35)
-
RVideo
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Usable disc versions (as of March 2006)
• 8x-speed or slower DVD+RWs
• 6x-speed or slower DVD-RWs (Ver.1.1,
*2
Ver.1.2 with CPRM
)
• 16x-speed or slower DVD+Rs
• 16x-speed or slower DVD-Rs (Ver.2.0,
*2
Ver.2.1 with CPRM
)
• 8x-speed or slower DVD+R DL (Double
Layer) discs
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD+R
DL,” and “DVD-R” are trademarks.
*1
When an unformatted DVD-R is inserted into
this recorder, it is automatically formatted in
Video mode. To format a new DVD-R in VR
mode, format using the “Disc Information”
*2
CPRM (Content Protection for Recordable
Media) is a coding technology that protects
copyrights for images.
Discs that cannot be recorded on
• 8 cm discs
• DVD-R DL (Dual Layer) discs
,continued
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Playable discs
Icon used in
this manual
Type
Disc Logo
Characteristics
Discs such as movies that can be
purchased or rented
DVD VIDEO
This recorder also recognizes DVD-R
Dual Layer (Video mode) discs as DVD
Video compatible discs.
DVD
VIDEO CDs or CD-Rs/CD-RWs in
VIDEO CD/Super VIDEO CD format
VIDEO CD
CD
VCD
CD
Music CDs or CD-Rs/CD-RWs in
music CD format
DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs/DVD-ROMs containing
JPEG image files
DATA DVD
—
—
DATA DVD
DATA CD
CD-ROMs/CD-Rs/CD-RWs
containing either MP3 audio tracks or
JPEG image files
DATA CD
8 cm DVD+RW, DVD-RW, and
DVD-R recorded with a DVD video
camera
(Still images recorded with a DVD
video camera cannot be played.)
8 cm DVD+RW/
DVD-RW/DVD-R
—
—
“DVD VIDEO” and “CD” are trademarks.
• DVDs that were recorded on a different
recorder and not correctly finalized.
• A disc recorded in a color system other than
NTSC, such as PAL
Discs that cannot be played
• PHOTO CDs
• CD-ROMs/CD-Rs/CD-RWs that are
recorded in a format different from the
formats mentioned in the table above.
• Data part of CD-Extras
• DVD-ROMs/DVD+RWs/DVD-RWs/
DVD+Rs/DVD-Rs that do not contain
DVD Video or JPEG image files.
• DVD Audio discs
• DVD-RAMs
• HD layer on Super Audio CDs
• DVD VIDEOs with a different region code
(page 11).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximum recordable number of titles
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side
with digital audio material on the other side.
However, since the audio material side does
not conform to the Compact Disc (CD)
standard, playback on this product is not
guaranteed.
Disc
Number of titles*
DVD-RW/DVD-R
DVD+RW/DVD+R
DVD+R DL
99
49
49
* The maximum length for one title is eight hours.
b Notes
Note on playback operations of DVD
VIDEOs/VIDEO CDs
• Some DVD+RWs/DVD+Rs, DVD-RWs/DVD-
Rs, or CD-RWs/CD-Rs cannot be played on this
recorder due to the recording quality or physical
condition of the disc, or the characteristics of the
recording device and authoring software. The
disc will not play if it has not been correctly
finalized. For more information, see the operating
instructions for the recording device.
• You cannot mix VR mode and Video mode on the
same DVD-RW. To change the disc’s format,
contents will be erased after reformatting.
• You cannot shorten the time required for
recording even with high-speed discs.
• It is recommended that you use discs with “For
Video” printed on their packaging.
• You cannot add new recordings to DVD+Rs,
DVD-Rs, or DVD-RWs (Video mode) that
contain recordings made on other DVD
equipment.
• In some cases, you may not be able to add new
recordings to DVD+RWs that contain recordings
made on other DVD equipment. If you do add a
new recording, note that this recorder will rewrite
the DVD menu.
• You cannot edit recordings on DVD+RWs,
DVD-RWs (Video mode), DVD+Rs, or DVD-Rs
that are made on other DVD equipment.
• If the disc contains PC data unrecognizable by
this recorder, the data may be erased.
Some playback operations of DVD VIDEOs/
VIDEO CDs may be intentionally set by
software producers. Since this recorder plays
DVD VIDEOs/VIDEO CDs according to the
disc contents the software producers
designed, some playback features may not be
available. See the instructions supplied with
the DVD VIDEOs/VIDEO CDs.
Region code (DVD VIDEO only)
Your recorder has a region code printed on
the rear of the unit and will only play DVD
VIDEOs (playback only) labeled with
identical region codes. This system is used to
protect copyrights.
DVD VIDEOs labeled
this recorder.
will also play on
ALL
If you try to play any other DVD VIDEO, the
message “Playback prohibited by region
code.” will appear on the TV screen.
Depending on the DVD VIDEO, no region
code indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
• You may not be able to record on some
recordable discs, depending on the disc.
Region code
Music discs encoded with copyright
protection technologies
This product is designed to play back discs
that conform to the Compact Disc (CD)
standard.
Recently, various music discs encoded with
copyright protection technologies are being
marketed by some record companies. Please
be aware that among those discs, there are
some that do not conform to the CD standard
and may not be playable by this product.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookups and Settings
Hooking Up the Recorder
Follow steps 1 through 6 to hook up and adjust the settings of the recorder. Do not connect the
b Notes
• Plug in cords securely to prevent unwanted noise.
• Refer to the instructions supplied with the components to be connected.
• You cannot connect this recorder to a TV that does not have a video input jack.
• Be sure to disconnect the AC power cord of each component before connecting.
Step 1: Connecting the Antenna Cable
Select one of the following antenna hookups.
If you have
Hookup
NOTE TO CATV SYSTEM INSTALLER (IN USA)
This reminder is provided to call the CATV system installer’s attention to Article 820- 40 of
the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry as practical.
b Notes
• If your antenna is a flat cable (300-ohm twin lead cable), use an external antenna connector (not supplied)
to connect the antenna to the recorder.
• If you have separate cables for VHF and UHF antennas, use a UHF/VHF band mixer (not supplied) to
connect the antenna to the recorder.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A: Cable box or satellite receiver with a video/audio output
With this hookup, you can record any channel on the cable box or satellite receiver. Be sure that
the satellite receiver or cable box is turned on.
To watch cable or satellite channel, you need to match the channel on the recorder (L1) to the
input jack connected to the cable box or satellite receiver (LINE 1 IN).
Wall
Cable box/satellite receiver
Antenna cable
(supplied)
AUDIO
OUT
R
VIDEO
OUT
S VIDEO
ANT IN
TO TV
L
to antenna input
S-video cord
(not supplied)
Audio/video cord
(not supplied)
TV
to LINE 1 IN
DVD recorder
: Signal flow
z Hints
• If your cable box or satellite receiver has an S-video jack, you can use an S-video cord (not supplied)
instead of the audio/video cord.
• If you connect an S-video cord to the LINE 1 IN jack, set “Line1 Input” of the “Line Input” to “S Video”
,continued
13
Download from Www.Somanuals.com. All Manuals Search And Download.
B: Cable box with an antenna output only
With this hookup, you can record any channel on the satellite receiver or cable box. Be sure that
the satellite receiver or cable box is turned on.
To watch cable programs, you need to match the channel on the recorder (2ch, 3ch, or 4ch) to
the antenna output channel on the cable box (2ch, 3ch, or 4ch).
Wall
Cable box
ANT IN
TO TV
Antenna cable
(supplied)
to VHF/UHF IN
DVD recorder
TV
to VHF/UHF OUT
to antenna input
: Signal flow
b Note
When using this connection, set “Antenna / Cable” of the “Tuner Preset” to “Antenna” in the “Basic” setup
14
Download from Www.Somanuals.com. All Manuals Search And Download.
.
C: Cable without cable box, or antenna only (no cable TV)
Use this hookup if you watch cable channels without a cable box. Also use this hookup if you
are using a VHF/UHF antenna or separate VHF and UHF antennas.
With this hookup, you can record any channel by selecting the channel on the recorder.
Wall
to VHF/UHF IN
DVD recorder
TV
to VHF/UHF OUT
to antenna input
Antenna cable (supplied)
: Signal flow
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the Video Cords
Select one of the following patterns, A through C, according to the input jack on your TV
monitor, projector, or AV amplifier (receiver). This will enable you to view pictures.
S-video cord
(not supplied)
INPUT
VIDEO
INPUT
A
Audio/video
cord (supplied)
B
S VIDEO
L
AUDIO
TV, projector, or AV
amplifier (receiver)
R
(yellow)
TV, projector, or AV
amplifier (receiver)
to LINE OUT (S VIDEO)
DVD recorder
to LINE OUT (VIDEO)
to COMPONENT VIDEO OUT
(green)
(blue)
(red)
COMPONENT
Component video cord
(not supplied)
C
VIDEO IN
Y
(green)
PB
(blue)
PR
(red)
TV, projector, or AV
amplifier (receiver)
: Signal flow
A Video input jack
You will enjoy standard quality images.
C Component video input jacks (Y, PB,
PR)
You will enjoy accurate color reproduction
and high quality images.
B S VIDEO input jack
You will enjoy high quality images.
If your TV accepts progressive 480p format
signals, you must use this connection. Then
set “Progressive Output” of “Video Output”
to “On” in the “Video” setup to send
progressive video signals. For details, see
16
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing “wide screen” images
Some recorded images may not fit your TV
screen. To change the picture size, see
If you are connecting to a VCR
Connect your VCR to the LINE IN jack on
b Note
Do not connect more than one type of video cord
between the recorder and your TV at the same time.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Connecting the Audio Cords
Select one of the following patterns, A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver). This will enable you to listen to sound.
[Speakers]
Rear (L)
[Speakers]
Rear (R)
A
AV amplifier (receiver)
with a decoder
Front (L)
Front (R)
Subwoofer
Center
to coaxial digital input
Coaxial digital cord (not supplied)
to DIGITAL OUT (COAXIAL)
DVD recorder
to LINE OUT (R-AUDIO-L)
INPUT
VIDEO
B
Audio/video cord
(supplied)
(white)
(yellow)
L
(red)
(white)
(red)
AUDIO
R
(yellow)*
TV, projector, or AV
amplifier (receiver)
: Signal flow
A Digital audio input jack
B Audio L/R (left/right) input jacks
This connection will use your TV’s or stereo
amplifier’s (receiver’s) two speakers for
sound.
*1
If your AV amplifier (receiver) has a Dolby
*2
Digital or DTS decoder and a digital input
jack, use this connection. You can enjoy
Dolby Digital (5.1ch) and DTS (5.1ch)
surround effects.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
For correct speaker location, see the operating
instructions supplied with the connected
components.
Step 4: Connecting the
AC Power Cord
b Notes
• Do not connect your TV’s audio output jacks to
the LINE IN (R-AUDIO-L) jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
Connect the supplied AC power cord to the
AC IN terminal of the recorder. Then plug the
recorder and TV power cords into the AC
outlet. After you connect the AC power cord,
you must wait for a short while before
operating the recorder. You can operate
the recorder once the front panel display
lights up and the recorder enters standby
mode.
If you connect additional equipment to this
power cord after all connections are
complete.
• With connection B, do not connect the LINE IN
(R-AUDIO-L) and LINE OUT (R-AUDIO-L)
jacks to your TV’s audio output jacks at the same
time. This will cause unwanted noise to come
from your TV’s speakers.
• With connection A, after you have completed the
connection, make the appropriate settings under
Otherwise, no sound or a loud noise will come
from your speakers.
*1
Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
*2
Digital Theater Systems, Inc.
1
to AC IN
2
to AC outlet
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling TVs with the
remote
Step 5: Preparing the
Remote
You can adjust the remote’s signal to control
your TV.
You can control the recorder using the
supplied remote. Insert two Size AA (R6)
batteries by matching the 3 and # ends on
the batteries to the markings inside the
battery compartment. When using the
b Notes
• Depending on the connected unit, you may not be
able to control your TV with some or all of the
buttons below.
remote, point it at the remote sensor
recorder.
on the
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may be reset to the default setting.
Set the appropriate code number again.
Number
buttons
b Notes
• If the supplied remote interferes your other Sony
DVD recorder or player, change the command
• Use the batteries correctly to avoid possible
leakage and corrosion. Should leakage occur, do
not touch the liquid with bare hands. Observe the
following:
– Do not use a new battery with an old battery, or
batteries of different manufacturers.
TV [/1
– Do not attempt to recharge the batteries.
– If you do not intend to use the remote for an
extended period of time, remove the batteries.
– If battery leakage occurs, wipe out any liquid
inside the battery compartment, and insert new
batteries.
TV VOL +/–
TV/VIDEO
TV CH +/–
• Do not expose the remote sensor (marked
the front panel) to strong light, such as direct
sunlight or a lighting apparatus. The recorder may
not respond to the remote.
on
1 Hold down the TV [/1 button located
at the bottom of the remote.
Do not press the [/1 button at the top of
the remote.
2 With the TV [/1 button pressed down,
enter the TV’s manufacturer code
using the number buttons.
For instance, to enter “09,” press “0” then
“9.” After you enter the last number,
release the TV [/1 button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Code numbers of controllable TVs
If more than one code number is listed,
try entering them one at a time until you
find the one that works with your TV.
If you have a Sony DVD player
or more than one Sony DVD
recorder
Manufacturer
Sony
Code number
If the supplied remote interferes with your
other Sony DVD recorder or player, set the
command mode number for this recorder and
the supplied remote to one that differs from
the other Sony DVD recorder or player after
The default command mode setting for this
recorder and the supplied remote is DVD3.
01 (default)
Hitachi
02
13
04
19
21
16
10
20
18
07
MGA/Mitsubishi
NEC
Panasonic
Philips
Pioneer
RCA
Number
buttons
Samsung
Sharp
Toshiba
SYSTEM
MENU
The remote performs the following:
Buttons
Operations
M/m,
ENTER
TV [/1
Turns your TV on or
off
TV VOL +/–
TV CH +/–
TV/VIDEO
Adjusts the volume
of your TV
Selects the channel
on your TV
has been finished. If “Easy Setup” has
not been finished, first perform “Easy
Setup.”
Switches your TV’s
input source
2 Press SYSTEM MENU.
The System Menu appears.
3 Select “SETUP,” and press ENTER.
,continued
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select “Others,” and press ENTER.
To check the Command Mode for the
recorder
Press x STOP on the recorder when the
recorder is turned off. The Command Mode
for the recorder appears in the front panel
display.
If the Command Mode for the recorder has
not been changed, set the Command Mode
for the remote to the default setting of
DVD3. If the Command Mode for the
remote is changed to DVD1 or DVD2, you
will be unable to operate this recorder.
5 Select “Command Mode,” and press
ENTER.
Changing channels of the
recorder using the remote
You can change channels of the recorder
using the number buttons.
6 Select a Command Mode (DVD1,
DVD2, or DVD3), and press ENTER.
Number
buttons,
SET
7 Set the Command Mode for the remote
so it matches the Command Mode for
the recorder you set above.
Follow the steps below to set the
Command Mode on the remote.
1 Hold down ENTER.
Example: for channel 50
Press “5,” “0,” then press SET.
2 While holding down ENTER, enter
the Command Mode code number
using the number buttons.
Command Mode Code number
DVD1
DVD2
DVD3
number button 1
number button 2
number button 3
3 Hold down both the number and
ENTER buttons at the same time for
more than three seconds.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Setup - Tuner Preset
Select whether or not you have a cable
connection.
The Tuner Preset function automatically
searches for all of the receivable channels
and presets them.
Step 6: Easy Setup
Make the basic adjustments by following the
on-screen instructions in “Easy Setup.”
To set the channels manually, see
[/1
Easy Setup - TV Type (page 74)
If you have a wide-screen TV, select
“16:9.” If you have a standard TV, select
either “4:3 Letter Box” (shrink to fit) or
“4:3 Pan Scan” (stretch to fit). This will
determine how “wide-screen” images are
displayed on your TV.
</M/m/,,
ENTER
Easy Setup - Audio Connection
If you connected an AV amplifier
(receiver) using a coaxial cord, select
“Yes : DIGITAL OUT” and set the
O
RETURN
3 Press ENTER when “Finish” appears.
“Easy Setup” is finished.
TV [/1
To return to the previous step
Press O RETURN.
1 Turn on the recorder and your TV.
Then switch the input selector on your
TV so that the signal from the recorder
appears on your TV screen.
z Hint
If you want to run “Easy Setup” again, select “Easy
Setup” from “SETUP” in the System Menu
The initial settings message appears.
• If this message does not appear, select
“Easy Setup” from “SETUP” in the
System Menu (“Settings and
b Notes
• If you use an S-video cord to connect your cable
box or satellite receiver, set “Line1 Input” of the
“Line Input” to “S Video” in the “Video” setup
2 Press ENTER.
• If there are only a few channels in your area that
carry time signals, setting the clock automatically
may take up to about 20 minutes after the recorder
turns off. If nothing happens even after you wait
about 20 minutes, set the clock manually in
Follow the on-screen instructions to
make the following settings.
Easy Setup - OSD
Select a language for the on-screen
displays.
Easy Setup - Clock
Select “Manual” and set the clock using
</M/m/,, then press ENTER. The
day of the week is set automatically.
you can select “Auto.” The recorder will
automatically search for a channel that
carries a time signal when you turn off
the recorder after finishing Easy Setup.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a VCR or Similar Device
After disconnecting the recorder’s AC power cord from the AC outlet, connect a VCR or
similar recording device to the LINE IN jacks of this recorder.
Use the DV IN jack on the front panel if the equipment has a DV output jack (i.LINK jack)
For details, refer to the instruction manual supplied with the connected equipment.
To record on this recorder, see “Recording from connected equipment without a timer” on
Connecting to the LINE 1 IN jacks
Connect a VCR or similar recording device to the LINE 1 IN of this recorder. If the equipment
has an S-video jack, you can use an S-video cord instead of an audio/video cord.
OUTPUT
VCR, etc.
VIDEO
AUDIO
S VIDEO
L
R
Audio/video cord
(not supplied)
S-video cord
(not supplied)
to LINE 1 IN
DVD recorder
: Signal flow
24
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Pictures containing copy protection signals that prohibit any copying cannot be recorded.
• If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
DVD recorder
VCR
TV
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch
video tapes, watch the tapes through a second line input on your TV.
Line input 1
VCR
DVD recorder
TV
Line input 2
• If you disconnect the recorder’s AC power cord, you will not be able to view the signals from the
connected VCR.
Connecting to the LINE 2 IN jacks on the front panel
Connect a VCR or similar recording device to the LINE 2 IN jacks of this recorder. If the
equipment has an S-video jack, you can use an S-video cord instead of an audio/video cord.
VCR, etc.
OUTPUT
VIDEO
AUDIO
S VIDEO
L
R
S-video cord
(not supplied)
Audio/video cord
(not supplied)
to LINE 2 IN
DVD recorder
: Signal flow
z Hint
When the connected equipment outputs only monaural sound, connect to just the L(MONO) and VIDEO
input jacks on the front of the recorder. Do not connect the R input jack.
b Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment’s input jack with the other
equipment’s output jack connected to the input jack of this recorder. This may cause noise (feedback).
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Satellite or Digital Tuner
Connect a satellite or digital tuner to this recorder using the LINE 1 IN jacks. Disconnect the
recorder’s AC power cord from the AC outlet when connecting the tuner.
To use the Synchro-Rec function, see below.
TV
Audio/video cord
INPUT
(supplied)
VIDEO
L
AUDIO
R
to LINE OUT
DVD recorder
to LINE 1 IN
Satellite tuner, etc.
Audio/video cord
(not supplied)
R
L
VIDEO
AUDIO
OUTPUT
: Signal flow
b Notes
If you want to use the Synchro Rec
function
This connection is necessary to use the
Synchro-Recording function. See
• Synchro-Recording does not work with some
tuners. For details, see the tuner’s operating
instructions.
• If you disconnect the recorder’s AC power cord,
you will not be able to view the signals from the
connected tuner.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Eight Basic Operations
— Getting to Know Your DVD Recorder
2. Recording a Program
+
RW
-
-
+
R
-
RWVR RWVideo
RVR
1. Inserting a Disc
-
RVideo
This section introduces the basic operation to
record a current TV program to a disc (DVD).
For an explanation of how to make timer
+
+
R
-
-
-
RW
RWVR RWVideo
RVR
-
RVideo
DVD VCD CD
DATA DVD
DATA CD
Z OPEN/
CLOSE
CH +/–
DISPLAY
1 Press Z OPEN/CLOSE, and place a
disc on the disc tray.
z REC
REC MODE
x REC
STOP
TV/VIDEO
Recording/playing side facing down
2 Press Z OPEN/CLOSE to close the
disc tray.
1 Insert a recordable DVD.
2 Press CH +/– to select the channel or
Wait until “LOAD” disappears from the
front panel display.
input source you want to record.
Unused DVDs are formatted
automatically.
• For DVD-RW discs
DVD-RWs are formatted in the
recording format (VR mode or Video
mode) set by “Format DVD-RW” in
the “DVD” setup.
3 Press REC MODE repeatedly to select
the recording mode.
Each time you press the button, the
display on the TV screen changes as
follows:
• For DVD-R discs
DVD-Rs are automatically formatted in
Video mode. To format an unused
DVD-R in VR mode, format the disc
using the “Disc Information” display
recording.
If the disc is recordable on this recorder,
you can manually re-format the disc to
For more details about the recording
4 Press z REC.
Recording starts.
Recording stops automatically after
8 hours of continuous recording or when
the DVD is full.
,continued
27
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording
Press x REC STOP.
Note that it may take a few seconds for
recorder to stop recording.
3. Playing the Recorded
Program (Title List)
To watch another TV program while
recording
+
-
-
+
-
RVR
RWVR RWVideo
RW
R
-
RVideo
Set your TV to the TV input using the TV/
To play a recorded title, select the title from
the Title List.
z Hint
If you do not want to watch TV while recording,
you can turn off the TV. When using a decoder,
make sure to leave it on.
b Notes
• After pressing z REC, it may take a short while
to start recording.
• You cannot change the recording mode while
recording.
TITLE LIST
• If there is a power failure, the program you are
recording may be erased.
</M/m/,,
ENTER
OPTIONS
Checking the disc status while
recording
/
mc
CM
x STOP
You can check the recording information
such as recording time or disc type.
Press DISPLAY during recording.
The recording information appears.
1 Insert a DVD.
Playback starts automatically depending
on the disc.
A Disc type/format
B Recording status
C Recording mode
D Recording time
Press DISPLAY to turn off the display.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press TITLE LIST.
3 Select a title, and press ENTER.
The sub-menu appears.
To show the extended Title List, press
OPTIONS to select “Display List,” and
press ENTER.
The sub-menu displays options
applicable only to the selected item. The
displayed options differ depending upon
the model, situation, and disc type.
Title List with Thumbnail Images
(Example: DVD+RW)
Sub-menu
m
4 Select “Play,” and press ENTER.
Extended Title List
Playback starts from the selected title.
To stop playback
Press x STOP.
To scroll the list display by page (Page
mode)
Press
the list display is turned on. Each time you
press REPLAY/ADVANCE , the
entire Title List changes to the next/previous
page of titles.
REPLAY/ADVANCE
while
A Title type:
Displays the title type (Original or
Playlist) for DVD-RWs/DVD-Rs (VR
mode).
About the Title List for DVD-RWs/DVD-Rs
(VR mode)
You can switch the Title List to show
Original or Playlist titles.
While the Title List menu is turned on, press
</,.
B Disc space (remainder/total)
C Title information:
Displays the title number, title name, and
recording date. Title size is shown in the
Thumbnail title list.
z (red): Indicates that the title is
currently being recorded.
To change the title order (Sort)
: Indicates the protected title.
While the Title List menu is turned on, press
OPTIONS to select “Sort Titles.” Press M/m
to select the item, and press ENTER.
D Scroll bar:
Appears when all of the titles do not fit
on the list. To view the hidden titles,
press M/m.
Order
Sorted
By Date
In order of when the titles
were recorded. The title that is
recorded most recently is
listed at the top.
E Title’s thumbnail picture:
The still images for each title are
displayed.
By Title
In alphabetical order.
By Number
In order of recorded title
number.
,continued
29
Download from Www.Somanuals.com. All Manuals Search And Download.
To change a title thumbnail picture
(Thumbnail) (DVD-RW/DVD-R in VR mode
only)
You can select a favorite scene for the
thumbnail picture shown in the Title List
menu.
4. Displaying the
Playing/Remaining Time
and Play Information
1
Press TITLE LIST.
Press </, to switch the Title Lists, if
necessary.
-
+
+
RVR
-
-
RWVR RWVideo
RW
R
-
RVideo
DVD VCD
CD
DATA DVD
DATA CD
2
3
Select a title, and press ENTER.
The sub-menu appears.
You can check the playing time and
remaining time of the current title, chapter,
track, or disc. Also, you can check the disc
name recorded on the DVD/CD.
Select “Set Thumbnail,” and press
ENTER.
The display for setting the thumbnail
point appears and the title starts to play.
4
5
While watching the playback picture,
press m/M to select the scene you
want to set for a thumbnail picture, and
press ENTER.
Playback pauses.
Press ENTER if the scene is correct.
If the scene is incorrect, press c/C to
select the scene you want to set for a
thumbnail picture, and press ENTER.
The display asks for confirmation.
• To change the thumbnail, press M.
DISPLAY
ENTER
OPTIONS
6
Select “OK,” and press ENTER.
The scene is set for the title’s thumbnail
picture.
TIME/TEXT
Press DISPLAY.
The displays differ depending on the disc
type or playing status.
To turn off the Title List
Press TITLE LIST.
z Hints
• After recording, the first scene of the recording
(the title) is automatically set as the thumbnail
picture.
• You can select “TITLE LIST” from the System
Menu.
b Notes
• The title names may not appear for DVDs created
on other DVD recorders.
• It may take a few seconds for the thumbnail
pictures to be displayed.
• After editing, the title thumbnail picture may
change to the first scene of the recording (title).
A Title number/name
(Shows either track number, track
name, scene number, or file name for
CDs, VIDEO CDs, DATA DVDs, or
DATA CDs.)
30
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hints
B Available functions for DVD VIDEOs
angle/ audio/ subtitle,
• If “DTS” of “Audio Connection” is set to “Off” in
the “Audio” setup, the DTS track selection option
will not appear on the screen even if the disc
(
etc.), or playback data for DATA
DVDs and DATA CDs
• When “Auto Display” is set to “On” (default) in
automatically appears on the screen when the
recorder is operated.
C The current selected function or audio
setting (appears only temporarily)
Example: Dolby Digital 5.1 ch
Rear (L/R)
b Note
Playing time of MP3 audio tracks may not be
displayed correctly.
Checking the playing/
remaining time
Front (L/R) +
Center
LFE (Low Frequency
Effect)
You can view the playing or time information
displayed on the front panel display.
D The current selected angle
*1
Press TIME/TEXT repeatedly.
The displays differ depending on the disc
type or playing status.
F Title type (only appears for Playlists)
G Play mode
Example: When playing a DVD
Playing time and number of the
current title
*2
I Playing status bar
*3
J Title number (chapter number
)
(Shows either track number, scene
number, album number , or file
*3
Remaining time of the current title
number for CDs, VIDEO CDs, DATA
DVDs, or DATA CDs.)
K Album name appears for DATA DVDs
Playing time and number of the
current chapter
or DATA CDs.
For CDs with CD text, press TIME/
TEXT.
*3
L Playing time (remaining time
)
Remaining time of the current chapter
*1
Displays Super VIDEO CDs as “SVCD,” DATA
CDs as “CD” and DATA DVDs as “DVD.”
Does not appear with VIDEO CDs, DATA
DVDs, and DATA CDs.
Displayed when you press TIME/TEXT
repeatedly.
*2
*3
Example: When playing a VIDEO CD
Playing time and number of the current
scene or track
,continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: When playing a CD
Track playing time and the current track/index
number
Checking the remaining disc
space
m
Remaining time of the current track
You can check the remaining disc space
using the “Disc Information” display.
m
Playing time of the disc
m
1 Insert a disc.
Remaining time of the disc
m
CD text (when available)
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Available settings differ depending on
the disc type.
Example: When playing an MP3 audio track
Playing time and number of the current track
m
Current album number
Example: When a DVD+RW is inserted.
Example: When viewing a JPEG image
Current file number and total number of files in the
current album
m
Current album number and total number of
albums
b Notes
“Remainder” (approximate)
• The remaining recording time in each
of the recording modes
• Disc space bar
• Remaining disc space/total disc space
• The recorder can only display the first level of a
CD’s text, such as the disc name.
• The letters or symbols that cannot be displayed
are replaced with “*.”
• Playing time of MP3 audio tracks may not be
displayed correctly.
z Hint
To increase disc space, see “To open up disc space”
32
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press </M/m/, to select the
character you want to enter, and press
ENTER.
5. Changing the Name of
a Recorded Program
The selected character appears at the top
of the display.
Example: Input Title Name
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
You can label a DVD, title, or program by
entering characters. You can enter up to 64
characters for a title or disc name, but the
actual number of characters displayed in the
menus such as the Title List will vary. The
steps below explain how to change the name
of the recorded program.
The type of characters will change
according to the language you select in
“Easy Setup.” Some languages allow you
to enter an accent mark.
To enter a letter with an accent mark,
select an accent followed by the letter.
Example: Select “ ` ” and then “a” to
enter “à.”
Number
buttons,
SET
INPUT
SELECT
To insert a space, select “Space.”
TITLE LIST
6 Repeat steps 4 and 5 to enter the
remaining characters.
Input row
</M/m/,,
ENTER
1 Press TITLE LIST.
2 Select a title, and press ENTER.
The sub-menu appears.
To erase a character, move the cursor to
the right of the character at the input row.
Select “Back” and press ENTER.
To insert a character, move the cursor to
the right of the point where you want to
insert the character. Select the character
and press ENTER.
3 Select “Title Name,” and press
ENTER.
The display for entering characters
appears.
4 Press </M/m/, to move the cursor
to the right of the display and select
“A” (upper-case), “a” (lower-case),
or “Symbol,” and press ENTER.
The characters for the selected type are
displayed.
To erase all of the characters, select
“Clear All” and press ENTER.
7 Select “Finish,” and press ENTER.
To cancel the setting, select “Cancel.”
,continued
33
Download from Www.Somanuals.com. All Manuals Search And Download.
To use the number buttons
You can also use the number buttons to enter
characters. Refer to the number next to each
row of letters on your TV screen.
6. Labeling and
Protecting a Disc
1
In step 5 above, press a number button
repeatedly to select a character.
Example:
You can execute options effective for the
entire disc using the “Disc Information”
display.
Press the number 3 button once to enter
“D.”
Press the number 3 button three times to
enter “F.”
2
3
Press ENTER or SET and select the next
character.
Select “Finish” and press ENTER.
z Hint
You can switch between “A” (upper-case), “a”
(lower-case), or “Symbol” by pressing INPUT
SELECT.
</M/m/,,
ENTER
OPTIONS
Labeling a disc
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
1 Insert a disc.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Available settings differ depending on
the disc type.
Example: When the inserted disc is a
DVD+RW.
3 Select “Disc Name,” and press
ENTER.
Enter the disc name in the “Input Disc
34
Download from Www.Somanuals.com. All Manuals Search And Download.
b Note
You can enter up to 64 characters for a DVD’s disc
name. The disc name may not appear when the disc
is played on other DVD equipment.
7. Playing the Disc on
Other DVD Equipment
(Finalize)
Protecting a disc
+
RW
-
-
+
R
RWVR RWVideo
-
RVR
-
-
RVR
RWVR
-
RVideo
1 Insert a disc.
Finalizing is necessary when you play discs
recorded with this recorder on other DVD
equipment.
When you finalize a DVD+RW, DVD-RW
(Video mode), DVD+R, or DVD-R (Video
mode), a DVD menu will be automatically
created, which can be displayed on other
DVD equipment.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Available settings differ depending on
the disc type.
Example: When the inserted disc is a
DVD-RW (VR mode).
Before finalizing, check the differences
between the disc types in the table below.
Differences between the disc types
Discs are automatically finalized
+
RW
when removed from the recorder.
However, you may need to finalize
the disc for certain DVD
equipment, or if the recording time
is short. You can edit or record on
the disc even after finalizing.
Finalizing is unnecessary when
playing a disc on VR format
compatible equipment.
Even if your other DVD equipment
is VR format compatible, you may
need to finalize the disc, especially
if the recording time is short. You
can edit or record on the disc even
after finalizing.
A
“On”/“Off”: Indicates whether
protection is set (DVD-RW/DVD-
R in VR mode only)
-
RWVR
B “Protect Disc”
3 Select “Protect Disc,” and press
ENTER.
4 Select “Protect,” and press ENTER.
Finalizing is necessary when
playing on any equipment other
than this recorder.
After finalizing, you cannot edit or
record on the disc. If you want to
record on it again, unfinalize
(page 37) or reformat the disc
(page 37). However, if you
reformat the disc, all recorded
contents will be erased.
-
RWVideo
To cancel the protection
Select “Unprotected” in step 4.
z Hint
You can set protection for individual titles
Finalizing is necessary. The disc
can be played only on equipment
that supports DVD-R in VR mode.
After finalizing you cannot edit or
record on the disc using this
recorder.
-
RVR
,continued
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Finalizing is necessary when
playing on any equipment other
than this recorder.
After finalizing, you cannot edit or
record on the disc.
+
R
Finalizing the disc using “Disc
Information” display
-
RVideo
1 Insert a disc.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
Z OPEN/
CLOSE
3 Select “Finalize,” and press ENTER.
The display shows the approximate time
required for finalizing and asks for
confirmation.
</M/m/,,
ENTER
OPTIONS
Finalizing the disc
using Z OPEN/CLOSE button
4 Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
1 Make a recording.
z Hint
You can check whether the disc has been finalized
or not. If you cannot select “Finalize” in step 3
above, the disc has already been finalized.
2 Press Z OPEN/CLOSE.
The display shows the approximate time
required for finalizing and asks for
confirmation.
b Notes
• Depending on the condition of the disc,
recording, or the DVD equipment, discs may not
play even if the discs are finalized.
• The recorder may not be able to finalize the disc
if it was recorded on another recorder.
For DVD+RWs, the recorder
automatically starts finalizing the disc.
After finalizing, the disc will be ejected
automatically.
3 Select “OK,” and press ENTER.
The recorder starts finalizing the disc.
After finalizing, the disc will be ejected
automatically.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Unfinalizing a disc
8. Reformatting a disc
-
-
RWVR RWVideo
+
RW
-
-
RWVR RWVideo
For DVD-RWs (Video mode)
DVD-RWs (Video mode) that have been
finalized to prohibit additional recording or
editing can be unfinalized to allow further
recording or editing.
New discs are automatically formatted when
inserted. If necessary, you can manually re-
format a DVD+RW or DVD-RW disc to
make a blank disc. For DVD-RWs, you can
select a recording format (VR mode or Video
For DVD-RWs (VR mode)
If you cannot record or edit on a DVD-RW
(VR mode) that has been finalized with other
DVD equipment, unfinalize the disc.
b Note
The recorder is not able to unfinalize DVD-RWs
(Video mode) that have been finalized on another
recorder.
1 Insert a disc.
</M/m/,,
ENTER
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
The “Disc Information” display appears.
OPTIONS
3 Select “Unfinalize,” and press
ENTER.
1 Insert a disc.
The recorder starts unfinalizing the disc.
Unfinalizing may take several minutes.
2 Press OPTIONS to select “Disc
Information,” and press ENTER.
Example: When a DVD+RW is inserted.
3 Select “Format,” and press ENTER.
4 Select “OK,” and press ENTER.
For DVD-RWs and unrecorded DVD-Rs
(Video mode), select “VR” or “Video,”
and press ENTER.
All contents on the disc are erased.
,continued
37
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
By reformatting, you can change the recording
format on DVD-RWs, or record again on DVD-
RWs that have been finalized.
b Note
On this model, 1 GB (read “gigabyte”) is equivalent
to 1 billion bytes. The larger the number, the larger
the disc space.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Press REC MODE repeatedly to switch the
recording modes.
Timer Recording
Approx. recording
time (hours)
Before Recording
Before you start recording…
Recording
mode
DVD
DVD+R
DL
• Check that the disc has enough available
DVD+RWs and DVD-RWs, you can free
• Adjust the recording picture quality and
HQ (High quality)
HSP
SP (Standard mode)
1
1 hr.
48 min.
R
1 hr.
30 min.
2 hr.
42 min.
2
3 hr.
37 min.
z Hint
LSP
ESP
LP
r
r
r
r
2 hr.
30 min.
4 hr.
31 min.
Timer recordings will be made regardless whether
or not the recorder is turned on. You can turn off the
recorder without affecting the recording even after
recording starts.
3
4
6
8
5 hr.
25 min.
7 hr.
14 min.
b Note
To play a recorded disc on other DVD equipment,
EP
10 hr.
51 min.
SLP (Long duration)
14 hr.
28 min.
Recording mode
Like the standard ×3 recording modes of
video tapes, you can select the desired
recording mode using the REC MODE
button.
Recording modes with higher quality provide
a more beautiful recording, but the large data
volume also results in a shorter recording
time.
b Notes
• The maximum continuous recording time for a
single title is eight hours.
• Situations below may cause slight inaccuracies
with the recording time.
– Recording a program with poor reception, or a
program or video source of low picture quality
– Recording on a disc that has already been edited
– Recording only a still picture or just sound
Conversely, a longer duration provides a
longer recording time, but the lower data
volume results in a coarser picture quality.
,continued
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a stereo/SAP
program
Timer Recording
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
The recorder can receive and record stereo/
SAP programs.
-
RVideo
You can set the timer for a total of
Recording stereo programs
40 programs, up to 30 days in advance.
Set the date, time, and channel of the program
manually.
If there is noise in the stereo program, set
“Auto Stereo” in the “Audio” setup to “Off”
(page 76). The sound will be recorded in
monaural but with less noise.
b Note
Do not operate your cable box or satellite receiver
just before or during a timer recording. This may
prevent the accurate recording of a program.
SAP (Second Audio Program)
When a SAP (Second Audio Program) is
received, the “SAP” indicator lights up on the
front panel display. To record only SAP
sound, set “Tuner Audio” in the “Audio”
Unrecordable pictures
TIMER
Pictures with copy protection cannot be
recorded on this recorder.
When the recorder receives a copy guard
signal, the recorder continues to record but
only a blank, grey colored screen will be
recorded.
</M/m/,,
ENTER
OPTIONS
z REC
Copy control Recordable discs
signals
x REC
STOP
Copy-Free
+
RW
-
RWVR
-
RWVideo
+
R
-
-
RVideo
RVR
Copy-Once
Copy-Never
-
RWVR (CPRM*)
1 Press TIMER.
-
RVR
(CPRM*)
None (a blank screen is
recorded)
* The recorded disc can be played only on CPRM
compatible equipment (page 8).
2 Press M/m to select the “Day and
Time” or “Mode” row. Then press
ENTER.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select an item using </, and
adjust using M/m. Then press ENTER.
To make additional changes to items in
different rows, return to step 2. The
adjustable items are listed below.
“Day and Time”:
If the timer settings overlap
Overlapped timer settings are shown as
follows.
Sets the date, start time, and stop time,
and selects the channel or input source.
The date item changes as follows:
Today y …… y Sat 12/2 (30 days
later) y Sun (every Sunday) y ……
y Sat (every Saturday) y Mon - Fri
(Monday to Friday) y Mon - Sat
(Monday to Saturday) y Daily y
Today
To store the setting as shown, select “OK.”
The program that does not have a
mark
next to it has priority and the overlapped
programs start recording only after the first
program has finished.
To cancel the overlapped setting, select
“Cancel.”
“Mode”:
“Extend Time”:
Sets the duration in increments of
10 minutes, for a maximum of
60 minutes when a timer recording is in
progress. If the program set to be
recorded daily or weekly is extended, the
manually extended time set here will be
added to the subsequent timer recording
times.
To confirm, change, or cancel a timer
recording
To extend the recording duration time
while recording
• If you make a mistake, select the item
and change the setting.
1
Press OPTIONS during recording to
select “Extend Rec Time,” and press
ENTER.
4 Select “OK,” and press ENTER.
The “TIMER LIST” display (page 44)
appears. The TIMER REC indicator
lights up on the front panel and the
recorder is ready to start recording.
Unlike a VCR, there is no need to turn off
the recorder before the timer recording
starts.
2
3
Press M/m to select the duration time.
You can set the duration in increments of
10 minutes, for a maximum of 60 minutes.
To stop recording during timer recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
Select “OK” and press ENTER.
Rec Mode Adjust
z Hint
If you are recording to a DVD-RW (VR mode) at a
recording mode that is SP or lower and is a 2x speed
or higher disc, you can play the title as it is being
recorded by selecting the program title on the Title
If there is not enough available disc space for
the recording, the recorder automatically
adjusts the recording mode to enable the
entire program to be recorded. Set “Rec
Mode Adjust” of the “Timer Settings” to
,continued
41
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• If a message indicating that the disc is full appears
on the screen, change the disc, or make available
space for the recording (DVD+RW/DVD-RW
Adjusting the recording picture
quality and size
You can adjust the recording picture quality
and picture size.
• Check that the clock is correctly set before setting
the timer recording. If not, the timer recording
cannot be made.
• To record a satellite program, turn on the satellite
tuner and select the satellite program you want to
record. Leave the satellite tuner turned on until
the recorder finishes recording. If you connect
equipment with a timer function, you can use the
• Even if the timer is set for the same daily or
weekly program, the timer recording cannot be
made if it overlaps with a program that has
priority. “
” will appear next to the overlapped
</M/m/,,
setting in the Timer List. Check the priority order
of the settings.
ENTER
OPTIONS
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• The Rec Mode Adjust function only works with a
timer recording. It does not function with Quick
Timer or Synchro Rec.
1 Before recording starts, press
OPTIONS to select “Rec Settings,”
and press ENTER.
Using the Quick Timer function
You can set the recorder to record in
30 minute increments.
Press z REC repeatedly to set the
duration.
Each press advances the time in 30 minute
increments. The maximum duration is six
hours.
2 Select the item you want to adjust,
and press ENTER.
(normal recording)
The adjustment display appears.
The time counter decreases minute by minute
to 0:00, then the recorder stops recording (the
power does not turn off). Even if you turn off
the recorder during recording, the recorder
continues to record until the time counter
runs out.
Example: Rec NR
To cancel the Quick Timer
“Rec Mode”:
Press z REC repeatedly until the counter
appears in the front panel display. The
recorder returns to normal recording mode.
Selects the recording mode for the
desired recording time and picture
quality. For more information, see
42
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
“DVD Rec. Picture Size”:
Sets the picture size of the program to be
recorded.
• 4:3 (default): Sets the picture size to
4:3.
• 16:9: Sets the picture size to 16:9 (wide
mode).
“DVD Rec. Picture Size” works with
DVD-RWs/DVD-Rs (Video mode)
when the recording mode is set to HQ,
HSP, SP, LSP, or ESP. For all other
recording modes, the screen size is fixed
at “4:3.”
For DVD-Rs/DVD-RWs (VR mode), the
actual picture size is recorded regardless
of the setting. For example, if a 16:9 size
picture is received, the disc records the
picture as 16:9 even if “DVD Rec.
Picture Size” is set to “4:3.”
For DVD+RWs/DVD+Rs, the screen
size is fixed at “4:3.”
• When playing a 16:9 size picture recorded as 4:3,
the image is fixed to 4:3 Letter Box regardless of
the setting in “TV Type” of “Video” setup
• Remnants of images may appear on your screen
when using “Rec NR.”
• “Rec Video Equalizer” does not affect the input
of the DV IN jack.
Creating chapters in a title
The recorder can automatically divide a
recording (a title) into chapters by inserting
chapter marks at approximately 6 minute
intervals during recording. To disable this
function, set “Auto Chapter” in the
When recording to a DVD-R (VR mode) or
DVD-RW (VR mode), you can insert and
“Rec NR” (noise reduction): Reduces
noise contained in the video signal.
“Rec Video Equalizer”: Adjusts the
picture in greater detail.
Press M/m to select the item you want to
adjust, then press ENTER.
• Contrast: Changes the contrast.
• Brightness: Changes the overall
brightness.
• Color: Makes the colors deeper or
lighter.
• Hue: Changes the color balance.
3 Adjust the setting using </M/m/,,
and press ENTER.
The default setting is underlined.
“Rec NR”: (weak) Off 1 ~ 2 ~ 3
(strong)
“Rec Video Equalizer”:
• Contrast: (weak) –3 ~ 0 ~ 3 (strong)
• Brightness: (dark) –3 ~ 0 ~ 3 (bright)
• Color: (light) –3 ~ 0 ~ 3 (deep)
• Hue: (red) –3 ~ 0 ~ 3 (green)
Repeat steps 2 and 3 to adjust any other
items.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
:
Indicates that the timer recording cannot
be recorded as set, such as for a timer
recording that cannot be recorded in the
selected Rec mode.
Checking/Changing/
Canceling Timer
Settings (Timer List)
When all of the timer settings do not fit
on the list, the scroll bar appears.
To view the hidden timer settings, press
M/m.
-
+
RW
-
-
+
R
RVR
RWVR RWVideo
-
RVideo
You can check, change, or cancel timer
settings using the Timer List.
2 Select the timer setting you want to
check/change/cancel, and press
ENTER.
The sub-menu appears.
3 Select one of the options, and press
ENTER.
“Modify”:
Changes the timer setting.
Select an item using </, and adjust
using M/m. Select “OK,” and press
ENTER.
TIMER LIST
</M/m/,,
ENTER
O
RETURN
/
1 Press TIMER LIST.
The Timer List appears.
“Erase”:
Erases the timer setting. Select “OK,”
and press ENTER.
Timer information displays the recording
date, time, recording mode, etc.
:
Indicates that the setting is overlapped by
another setting.
(red):
z
Indicates the setting is currently being
recorded.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
“Check Overlap”:
Checks for overlapped settings.
The timer setting without the
has priority over the other settings.
Changing the priority of
overlapped settings
mark
If the timer settings overlap, the program that
was set last has priority and will be recorded.
A timer recording of lower priority may be
canceled, start from the middle or stop
midway through the program.
You can change the priority of a program if
necessary.
To change the priority of a program,
press </, to select “Change.” For
When the timer settings overlap
The program set last has priority.
Example: You set the timer in order of A, B,
and C (setting C has first priority)
Select “Close” to return to the Timer List.
To change or cancel the setting, repeat
steps 2 and 3 above.
will be cut off
To scroll the list display by page (Page
mode)
Press
the list display is turned on. Each time you
press REPLAY/ADVANCE , the
REPLAY/ADVANCE
while
entire Timer List changes to the next/
previous page of timer settings.
Actual recording
To turn off the Timer List
If you give setting B priority over setting C,
all of program B will be recorded and
program C is recorded only after program B
has ended.
Press TIMER LIST or O RETURN.
z Hint
While recording, you cannot modify the timer
setting for the current recording, but you can extend
the duration of the recording time (page 41).
b Notes
• Even if the timer is set, timer recordings cannot be
made while recording a program that has priority.
• Even if the timer is set for the same daily or
weekly program, the timer recording cannot be
made if it overlaps with a program that has
If the end time of one recording and the
start time of another are the same
If program B has priority, the end of program
A will be cut off.
priority. “
” will appear next to the overlapped
setting in the Timer List. Check the priority order
of the settings.
,continued
45
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
If program A has priority, recording of
program B may be delayed.
You can change the priority of a timer setting while
recording.
1 Press TIMER LIST.
The Timer List appears.
2 Select an overlapped timer setting,
and press ENTER.
indicates that the timer setting is
overlapped by another timer setting.
3 Select “Check Overlap,” and press
ENTER.
4 Select “Change,” and press ENTER.
5 Press M/m to change the timer
setting’s priority, and press ENTER.
The setting moves to its new location in
the list. A timer setting higher up in the
list has higher priority.
To return to the Timer List, select
“Cancel.”
46
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Set the timer on the connected
equipment to the time of the program
you want to record, and turn it off.
Recording From
Connected Equipment
5 Press c z SYNCHRO REC.
The SYNCHRO REC indicator lights up
on the front panel. The recorder is ready
to start Synchro-Recording.
+
RW
-
-
+
R
-
RVR
RWVR RWVideo
-
RVideo
The recorder automatically starts
recording when it receives an input
signal from the connected equipment.
The recorder stops recording when the
connected equipment turns off.
INPUT
SELECT
To stop recording
Press x REC STOP or c z SYNCHRO
REC.
To cancel Synchro Rec
Press c z SYNCHRO REC.
The SYNCHRO REC indicator on the
recorder turns off.
z REC
x REC
STOP
REC MODE
b Notes
c z
• The recorder starts recording only after detecting
a video signal from the connected equipment. The
beginning of the program may not be recorded
regardless of whether or not the recorder’s power
is on or off.
SYNCHRO
REC
• During Synchro-Recording, other operations,
such as normal recording, cannot be performed.
• To use the connected equipment while the
recorder is standing by for Synchro-Recording,
cancel Synchro-Recording by pressing
c z SYNCHRO REC. Be sure to turn off the
connected equipment and press c z SYNCHRO
REC to reset Synchro-Recording before the timer
recording starts.
• The Synchro Rec function does not work with
some tuners. For details, see the tuner’s operating
instructions.
• While the recorder is standing by for Synchro-
Recording, the Auto Clock Set function (page 72)
does not work.
Recording from connected
equipment with a timer
(Synchro Rec)
You can set the recorder to automatically
record programs from connected equipment
that has a timer function (such as a satellite
tuner). Connect the equipment to the LINE 1
When the connected equipment turns on, the
recorder starts recording a program from the
LINE 1 IN jacks.
• To use the Synchro Rec function, you must first
set the recorder’s clock correctly.
1 Insert a recordable DVD.
2 Press INPUT SELECT repeatedly to
select “L1.”
3 Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
,continued
47
Download from Www.Somanuals.com. All Manuals Search And Download.
If the timer settings of a Synchro-
Recording and another timer recording
overlap
Regardless of whether or not the program is a
Synchro Rec program, the program that starts
first has priority and the second program
starts recording only after the first program
has finished.
6 Press the pause (or play) button on the
connected equipment to cancel the
playback pause status.
The connected equipment starts playback
and the playback image is recorded by
this recorder.
To stop recording, press x REC STOP
on this recorder.
If you connect a digital video camera with
a DV IN jack
an explanation of how to record from the DV
IN jack.
First program
Second
program
will be cut off
z Hint
You can adjust the settings for the recording picture
before recording. See “Adjusting the recording
Recording from connected
equipment without a timer
b Notes
You can record from a connected VCR or
similar device. To connect a VCR or similar
device, see “Connecting a VCR or Similar
Device” on page 24. Use the DV IN jack on
the front panel if the equipment has a DV
output jack (i.LINK jack).
• When recording a video game image, the screen
may not be clear.
• Any program that contains a Copy-Never copy
guard signal cannot be recorded. The recorder
continues to record, but a blank screen will be
recorded.
1 Insert a recordable DVD.
2 Press INPUT SELECT to select an input
source according to the connection
you made.
The front panel display changes as
follows:
channel
3 Press REC MODE repeatedly to select
the recording mode.
For details about the recording mode, see
4 Insert the source tape into the
connected equipment and set to
playback pause.
5 Press z REC.
This recorder starts recording.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select the title, and press ENTER.
The sub-menu appears.
Playback
4 Select “Play,” and press ENTER.
Playback starts from the selected title.
Playing
To use the DVD’s Menu
+
RW
+
R
-
-
-
RVR
RWVR RWVideo
When you play a DVD VIDEO, or a finalized
DVD+RW, DVD-RW (Video mode),
DVD+R, or DVD-R (Video mode), you can
display the disc’s menu by pressing TOP
MENU or MENU.
-
RVideo
DVD VCD
CD
DATA DVD
DATA CD
Z OPEN/
CLOSE
To play VIDEO CDs with PBC functions
PBC (Playback Control) allows you to play
VIDEO CDs interactively using the menu on
your TV screen.
When you start playing a VIDEO CD with
PBC functions, the menu appears.
Select an item using the number buttons and
press ENTER. Then, follow the instructions
in the menu (press H PLAY when “Press
SELECT” appears).
Number
buttons
AUDIO
TOP MENU
MENU
SUBTITLE
TITLE LIST
</M/m/,,
ENTER
OPTIONS
/
. PREV
NEXT >
The PBC function of Super VIDEO CDs does
not work with this recorder. Super VIDEO
CDs are played in continuous play mode
only.
H PLAY
X PAUSE
x STOP
To change the angles
If various angles (multi-angles) for a scene
are recorded on the disc, “
” appears in
1 Insert a disc.
the front panel display. Press OPTIONS
during playback to select “Change Angle,”
and press ENTER.
• If you insert a DVD VIDEO, VIDEO
CD, CD, DATA DVD, or DATA CD,
press H PLAY. Playback starts.
To stop playback
Press x STOP.
2 Press TITLE LIST.
For details about the Title List, see “3.
Example: DVD+RW
,continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
To resume playback from the point where
you stopped (Resume Play)
To lock the disc tray (Child Lock)
You can lock the disc tray to prevent children
from ejecting the disc.
When the recorder is turned on, hold down
x STOP until “LOCKED” appears in the
front panel display. The Z OPEN/CLOSE
button does not work while the Child Lock is
set.
When you press H PLAY again after you
stop playback, the recorder resumes playback
from the point where you pressed x STOP.
To start from the beginning, press OPTIONS
to select “Play Beginning,” and press
ENTER. Playback starts from the beginning
of the title/track/scene.
To unlock the disc tray, hold down x STOP
until “UNLOCKED” appears in the front
panel display when the recorder is turned on.
The point where you stopped playing is
cleared when:
– you open the disc tray.
– you play another title.
z Hints
• You can also use the H PLAY button in step 3
(page 49) to start playback.
• Even if you select “Factory Setup” in the
set.
– you switch the Title List menu to Original
or Playlist (DVD-RWs/DVD-Rs in VR
mode only).
– you edit the title after stopping playback.
– you change the settings on the recorder.
– you turn off the recorder (VIDEO CD/CD/
DATA DVD/DATA CD only).
– you make a recording (except for DVD-
RWs/DVD-Rs in VR mode).
– you disconnect the AC power cord.
To play restricted DVDs (Parental Control)
If you play a restricted DVD, the message
“Do you want to temporarily change the
Parental Control level to *?” appears on your
TV screen.
1
Select “OK” and press ENTER.
The display for entering your password
appears.
2
3
Enter your four-digit password using the
number buttons.
Press ENTER to select “OK.”
The recorder starts playback.
To register or change the password, see
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback options
For MP3 or JPEG operations, see “Playing MP3 Audio Tracks or JPEG Image Files” on
Buttons
Operations
AUDIO
Selects one of the audio tracks recorded on the disc when pressed
repeatedly in normal playback mode.
-
-
RVR
RWVR
DVD
: Selects the language.
DVD
VCD CD
-
-
RWVR
RVR : Selects the main or sub sound.
: Selects stereo or monaural audio tracks.
VCD CD
SUBTITLE
Selects a subtitle language when pressed repeatedly.
Replays the scene/briefly fast forwards the scene.
DVD
REPLAY/
ADVANCE
(instant
replay/instant advance)
-
-
+
RW
RWVR RWVideo
-
+
R
RVideo
-
RVR
DVD
. PREV/NEXT >
Goes to the beginning of the previous/next title/chapter/scene/
track.
Fast reverses/fast forwards the disc when pressed during
playback.
(fast reverse/fast forward)
Search speed changes as follows:
fast reverse fast forward
m1 T t 1M
m2 T T t t 2M
*
*
m3 T T T t t t 3M
When you press and hold the button, fast forward/fast reverse
continues at the selected speed until you release the button.
* m3 and 3M are only available for DVDs.
Plays in slow motion when pressed for more than one second in
pause mode.
(slow, freeze frame)
Plays one frame at a time when pressed briefly in pause mode.
-
-
RWVideo
+
RWVR
RW
-
-
RVideo
+
R
RVR
*
DVD VCD
* Playback direction only
X PAUSE
Pauses playback.
To resume normal playback, press H PLAY.
,continued
51
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
2 Select an item, and press ENTER.
The adjustment display appears.
“FNR” (frame noise reduction):
Reduces noise contained in the
luminance element of the video signal.
“BNR” (block noise reduction):
Reduces “block noise” or mosaic like
patterns in the picture.
• Angles and subtitles cannot be changed with titles
recorded on this recorder.
• Slideshows made with a DVD camcorder can
only be played. Other play functions, such as fast
forward, cannot be used.
Notes on playing DTS sound tracks on a
CD
“MNR” (mosquito noise reduction):
Reduces the faint noise appearing around
the outlines of the images. The noise
reduction effects are automatically
adjusted within each setting range
according to the video bit rate and other
factors.
• When playing DTS-encoded CDs, excessive
noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system,
the consumer should take proper precautions
when the analog stereo jacks of the recorder are
connected to an amplification system. To enjoy
DTS Digital Surround™ playback, an external
DTS decoder must be connected to the DIGITAL
OUT jack of the recorder.
“Sharpness”:
Sharpens the outlines of the images.
“PB Video Equalizer” (Playback video
equalizer):
• Set the sound to “Stereo” using the AUDIO
button when you play DTS sound tracks on a CD
Adjusts the picture in greater detail.
Select an item and press ENTER.
• Contrast: changes the contrast.
• Brightness: changes the overall
brightness.
Notes on playing DVDs with a DTS sound
track
DTS audio signals are output only through the
DIGITAL OUT (COAXIAL) jack.
When you play a DVD with DTS sound tracks, set
• Color: makes the colors deeper or
lighter.
• Hue: changes the color balance.
3 Press </, to adjust the setting, and
Adjusting the picture quality
press ENTER.
The default settings are underlined.
+
RW
+
R
-
-
-
RVR
RWVR RWVideo
“FNR”: (weak) Off
“BNR”: (weak) Off
“MNR”: (weak) Off
1
1
1
2
2
2
3 (strong)
3 (strong)
3 (strong)
-
RVideo
DVD VCD
1 Press OPTIONS during playback to
select “Video Settings,” and press
ENTER.
“Sharpness”*: (weak) Off
(strong)
1
2
3
“PB Video Equalizer”:
• Contrast: (weak) –3 ~ 0 ~ 3 (strong)
• Brightness: (dark) –3 ~ 0 ~ 3 (bright)
• Color: (light) –3 ~ 0 ~ 3 (deep)
• Hue: (red) –3 ~ 0 ~ 3 (green)
Repeat steps 2 and 3 to adjust any other
items.
* “1” softens the outlines of the images. “2”
enhances the outlines and “3” enhances them
more than “2.”
52
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• If the outlines of the images on your screen
become blurred, set “BNR” and/or “MNR” to
“Off.”
Playing from the beginning of
the program you are recording
(Chasing Playback)
• Depending on the disc or the scene being played,
the above BNR, MNR, or FNR effects may be
hard to discern. And, these functions may not
work with some screen sizes.
• When using the “Sharpness” function, noise
found in the title may become more apparent. In
this case, it is recommended that you use the BNR
function with the “Sharpness” function. If the
condition still does not improve, set the
“Sharpness” level to “Off.”
-
RWVR
“Chasing Playback” allows you to view the
recorded part of a program while the
recording is being made. You do not need to
wait until the recording finishes.
Press OPTIONS while recording to select
“Chasing Playback,” and press ENTER.
Playback starts from the beginning of the
program you are recording.
When you fast forward to the point that you
are recording, Chasing Playback returns to
normal playback.
Adjusting the delay between
the picture and sound (AV
SYNC)
+
RW
+
R
-
-
-
RVR
RWVR RWVideo
-
RVideo
DVD VCD
b Notes
• For DVD-RWs (VR mode), this function does not
work when recording:
– on a 1x-speed DVD-RW.
1 Press OPTIONS during playback to
select “Audio Settings,” and press
ENTER.
– in the HQ or HSP recording mode.
• The DVD’s picture on your TV screen freezes for
a few seconds when you fast forward/fast reverse
or instant replay/advance the recording.
• Chasing Playback is possible from one minute or
more after recording starts.
• Even if you fast forward the recorded program,
there will always be a time difference of about
one minute or more between the recorded
program and the current TV broadcast.
2 Select “AV SYNC”, and press ENTER.
“AV SYNC”:
When the video is delayed, this function
delays the audio for synchronization with
the video (0 to 120 milliseconds). Larger
numbers indicate a longer audio delay for
synchronization with the video. When
dubbing to a VCR or other video
recording equipment, be sure to return
this setting to 0 ms (default).
3 Press </, to adjust the setting, and
press ENTER.
,continued
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a previous recording
while making another
(Simultaneous Rec and Play)
Searching for a Title/
Chapter/Track, etc.
+
RW
+
R
-
-
-
RWVR RWVideo
RVR
-
RWVR
-
RVideo
DVD VCD
CD
DATA DVD
You can play a previously recorded program
while recording another on the same disc.
Playback continues even if the recording is a
timer recording.
DATA CD
You can search a disc by title, chapter, scene
or track. As titles and tracks are assigned
individual numbers, select the title or track by
entering its number. You can also search for
a scene using the time code.
1 While recording, press TITLE LIST.
The Title List appears.
2 Select the title you want to play, and
press ENTER.
The sub-menu appears.
Number
buttons,
SET
3 Select “Play”, and press ENTER.
Playback starts from the selected title.
b Notes
• This function does not work when recording:
– on a 1x-speed DVD-RW.
ENTER
– in the HQ or HSP recording mode.
• When playing a title recorded in the HQ or HSP
recording mode, picture noise may appear
depending upon the condition of the recording.
• Picture noise may appear depending upon the
condition of the recording, or when playing a title
recorded in the HQ or HSP recording mode. The
picture freezes for a few seconds when you use
fast forward/fast reverse or instant replay/
advance.
OPTIONS
1 Press OPTIONS during playback to
select a search method, and press
ENTER.
“Title Search” (for DVDs)
“Chapter Search” (for DVDs)
“Track Search” (for CDs/DATA CDs)
“Search” (for VIDEO CDs)
“Album Search” (for DATA DVDs/
DATA CDs)
“Time Search” (for DVDs): Searches for
a starting point by entering the time code.
“File Search” (for DATA DVDs/DATA
CDs)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
The display for entering the number
appears.
Example: Title Search
Playing MP3 Audio
Tracks or JPEG Image
Files
DATA DVD DATA CD
The number in parentheses indicates the
total number of titles, tracks, etc.
You can play MP3 audio tracks and JPEG
image files on DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) or JPEG image files on DATA
DVDs (DVD-ROMs/DVD+RWs/DVD+Rs/
DVD-RWs/DVD-Rs).
2 Press the number buttons to select the
number of the title, chapter, track,
time code, etc., you want.
For example: Time Search
To find a scene at 2 hours, 10 minutes,
and 20 seconds, enter “21020.”
If you make a mistake, select another
number.
3 Press ENTER or SET.
The recorder starts playback from the
selected number.
AUDIO
DISPLAY
</M/m/,,
ENTER
OPTIONS
/
. PREV
m
NEXT >
M
H PLAY
x STOP
X PAUSE
TIME/TEXT
1 Insert a disc.
2 Press H PLAY.
For MP3 discs, playback starts from the
first MP3 audio track on the disc.
For JPEG files, a slideshow of the
pictures on the disc begins.
If the disc contains MP3 audio tracks and
JPEG image files, only the JPEG image
files are played back when H PLAY is
pressed.
To stop playback or slideshow
Press x STOP.
To pause playback or slideshow
Press X PAUSE.
,continued
55
Download from Www.Somanuals.com. All Manuals Search And Download.
To play the beginning of the track
Press OPTIONS to select “Play Beginning,”
and press ENTER.
About MP3 audio tracks and
JPEG image files
To fast forward or review a track
MP3 is an audio compression technology that
satisfies certain ISO/MPEG regulations.
JPEG is an image compression technology.
You can play MP3 (MPEG1 Audio Layer 3)
format audio tracks and JPEG image files on
DATA CDs (CD-ROMs/CD-Rs/CD-RWs)
or JPEG image files on DATA DVDs (DVD-
ROMs/DVD+RWs/DVD+Rs/DVD-RWs/
DVD-Rs).
Press m/M during playback.
To go to the next or previous MP3 audio
track or JPEG image file
Press . PREV or NEXT > during
playback. If you repeatedly press . PREV
or NEXT >, you will go to the next or
previous album. (MP3 audio track only)
DATA CDs must be recorded according to
ISO9660 Level 1, Level 2 or Joliet format for
the recorder to recognize the MP3 tracks.
You can also play discs recorded in
To go to the next or previous album
Press
REPLAY/ADVANCE
during
playback or slideshow.
MultiSession/Border.
To rotate a picture
See the instructions supplied with the disc
drives and the recording software (not
supplied) for details on the recording format.
Press OPTIONS while the JPEG image is
displayed to select “Rotate Right” or “Rotate
Left,” and press ENTER.
z Hints
Note on MultiSession/Border discs
If audio tracks and images in Music CD
format or Video CD format are recorded in
the first session/border, only the first session/
border will be played back.
• Press the AUDIO button to switch between
stereo or monaural audio tracks.
• You can rotate a JPEG image by using the </,
buttons when the image is displayed.
• Press DISPLAY repeatedly to show information
about the JPEG album or image on your TV
screen. Then press TIME/TEXT to toggle
between the current selected image number and
album number.
b Note
The recorder may not be able to play some DATA
CDs created in the Packet Write format.
b Notes
• Some JPEG files, especially files of three million
pixels or more, may lengthen the slideshow
interval.
• Rotated JPEG images will not be saved when you
switch to another folder.
• Images larger than 720 × 480 will be reduced to
720 × 480 when displayed.
• The following images are not displayed:
– progressive JPEG image files
– grayscale JPEG image files
– 4:1:1 JPEG image files
• When you attempt to play a broken file or a file
that does not satisfy the play conditions,
appears but the recorder cannot play the file.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 audio tracks or JPEG
image files that the recorder
can play
About playback order of
albums, tracks, and files
Albums play in the following order:
The recorder can play the following tracks
and files:
Structure of disc contents
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
– MP3 audio tracks with the extension
“.mp3.”
– JPEG image files with the extension “.jpeg”
or “.jpg.”
ROOT
– JPEG image files that conform to the DCF*
image file format.
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by JEITA
(Japan Electronics and Information Technology
Industries Association).
b Notes
• The recorder will play any data with the extension
“.mp3,” “.jpeg,” or “.jpg,” even if they are not in
MP3 or JPEG format. Playing these data may
generate a loud noise which could damage your
speaker system.
• The recorder does not conform to audio tracks in
mp3PRO format.
• Some files cannot be played.
• The letters that cannot be displayed are replaced
with “*.”
Album
MP3 audio track/
JPEG image file
When you insert a DATA CD/DATA DVD
and press H PLAY, the numbered tracks (or
files) are played sequentially, from 1
through 7. For JPEG image files, press
ADVANCE
to go to the next album. (For
instance, when you want to go from 1 to
2.) Any sub-albums/tracks (or files)
contained within a currently selected album
take priority over the next album in the same
tree. (Example: C contains D so 4 is
played before 5.)
z Hints
• If you add numbers (01, 02, 03, etc.) to the front
of the track/file names when you store the tracks
(or files) in a disc, the tracks and files will be
played in that order.
• Since a disc with many trees takes longer to start
playback, it is recommended that you create
albums with no more than two trees.
,continued
57
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• Depending on the software you use to create the
DATA DVD/DATA CD, the playback order may
differ from the above illustration.
• No more than a total of 999 individual folders can
be played. (Folders that do not contain JPEG/
MP3 files are counted as well.)
• No more than a total of 999 folders and 9999 files
can be played. (Files other than JPEG/MP3 files,
and folders that do not contain JPEG/MP3 files
are counted as well.)
• No more than 999 folders and files can be
recognized in a single folder. (Folders that do not
contain JPEG/MP3 files are counted as well.)
• Proceeding to the next or another album may take
some time.
• This recorder supports MP3 audio bit rates up to
320 kbps.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
To open up disc space
To open up disc space on a DVD+RW or
DVD-RW (Video mode), erase the title with
the largest number in the title list.
Erasing and Editing
Before Editing
Largest title number
This recorder offers various edit options for
various disc types.
b Notes
• You may lose the edited contents if you remove
the disc or a timer recording starts while editing.
• DVD discs created by DVD video cameras
cannot be edited on this recorder.
• If a message appears and indicates that the disc’s
control information is full, erase or edit
unnecessary titles.
• When editing a DVD+R or DVD-R, finish all
editing before finalizing the disc. You cannot edit
a finalized disc.
For the DVD-RWs (VR mode), you can erase
any title.
For DVD-Rs and DVD+Rs, the available disc
space does not increase even if you erase
titles.
-
RWVR
+
RW
-
RVR
-
Edit
RWVideo
features
+
R
Original Playlist
title
title
-
RVideo
To switch between the Playlist and
Original Title List
Erase
Yes
Yes
Yes
Yes
Yes
Yes*
Yes
No
You can display the Playlist titles in the Title
List (Playlist), or the Original titles in the
Title List (Original). To switch the two Title
Lists, press </, while a Title List is
displayed. To create and edit a Playlist, see
Protect Title Yes
No
Title Name Yes
Yes
Yes
Yes
Yes
Yes
A-B Erase
Yes
Erase Titles Yes
Divide Title No
Set
Yes
No
Thumbnail
Chapter mark Yes
Yes
Yes
No
No
Playlist
Yes
creation
ChangeOrder No
Yes
Yes
No
No
Combine
Titles
No
* DVD+RW only
Download from Www.Somanuals.com. All Manuals Search And Download.
59
“Set Thumbnail”: Changes the title’s
thumbnail picture that appears in the
“Make a Playlist”: Adds the entire title to
Erasing and Editing a
Title
+
RW
-
+
R
-
RVR
-
RWVideo
RWVR
-
RVideo
z Hints
• You can erase multiple titles at one time
This section explains the basic edit functions.
Note that editing is irreversible. To edit
DVD-RWs/DVD-Rs (VR mode) without
changing the original recordings, create a
b Note
DVD-RW/DVD-R (VR mode) playlist titles cannot
be protected.
Erasing multiple titles (Erase
Titles)
CHAPTER
MARK
+
RW
-
-
+
-
RVR
RWVR RWVideo
R
CHAPTER
ERASE
MARK
-
RVideo
TITLE LIST
You can select and erase more than one title
at one time using the OPTIONS menu.
</M/m/,,
ENTER
O
RETURN
OPTIONS
1 Press TITLE LIST.
. PREV
NEXT >
CM
For DVD-RWs/DVD-Rs in VR mode,
press </, to switch the Title Lists, if
necessary.
mc
X PAUSE
2 Press OPTIONS to select “Erase
Titles,” and press ENTER.
The display for selecting titles to be
erased appears.
1 Press TITLE LIST.
For DVD-RWs/DVD-Rs in VR mode,
press </, to switch the Title Lists, if
necessary.
2 Select a title, and press ENTER.
The sub-menu appears.
3 Select an option, and press ENTER.
You can make the following edits to the
title.
3 Select a title, and press ENTER.
A check mark appears in the check box
next to the selected title.
“Erase”: Erases the selected title. Select
“OK” when asked for confirmation.
• To clear the check mark, press ENTER
again.
• To clear all of check marks, select
“Reset.”
“Protect Title”: Protects the title. “
appears next to the protected title.
”
“Title Name”: Allows you to enter or re-
“A-B Erase”: Erases a section of the title
4 Repeat step 3 to select all of the titles
you want to erase.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
5 When you finish selecting titles,
select “OK,” and press ENTER.
The list of the titles to be erased appears
for confirmation.
4 Select point B using m/M, and
press ENTER.
Playback pauses.
5 Press ENTER if point B is correct.
If point B is incorrect, select point B
using c/C, and press ENTER. The
display asks for confirmation.
• To reset point A, press M and
O RETURN, and go to step 2.
• To reset point B, press M and repeat
step 4.
• To change the selection, select
“Change,” and repeat from step 3.
6 Select “OK” and press ENTER.
The titles are erased.
To erase all titles on the disc
• To preview the title without scenes to
be erased, select “Preview” (except for
DVD+RWs).
You can reformat a DVD+RW or DVD-RW
to make the disc blank.
6 Select “OK,” and press ENTER.
The scene is erased. The display for
setting point A appears.
Erasing a section of a title
(A-B Erase)
• To continue, go to step 2.
• To finish, select “Quit.”
+
RW
-
RWVR
-
RVR
You can select a section (scene) in a title and
erase it. Note that erasing scenes in a title
cannot be undone.
z Hint
A chapter mark is inserted after the scene was
erased. The chapter mark divides the title into
separate chapters on either side of the mark.
Title,” select “A-B Erase” and press
ENTER.
b Notes
• Images or sound may be momentarily interrupted
at the point where you erase a section of a title.
• Sections shorter than five seconds may not be
erased.
The display for setting point A appears.
The title starts to play.
• To return to the beginning of the title,
press X PAUSE and then press
. PREV.
• For DVD+RWs, the erased section may be
slightly different from the points you selected.
Playback point
2 Select point A using m/M, and
press ENTER.
Playback pauses.
3 Press ENTER if point A is correct.
If point A is incorrect, select point A
using c/C, and press ENTER. The
display for setting point B appears.
,continued
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Creating chapters manually
Creating and Editing a
Playlist
-
-
RVR
RWVR
You can manually insert a chapter mark at
any point you like during playback or
recording.
-
-
RVR
RWVR
Playlist edit allows you to edit or re-edit
without changing the actual recordings. You
can create up to 97 Playlist titles.
Press CHAPTER MARK at the point where
you want to divide the title into chapters.
Each time you press the button, “Marking ...”
appears on the screen and the scenes to the
left and right of the mark become separate
chapters.
Example: You have recorded the final few
matches of a football tournament on a DVD-
RW/DVD-R (VR mode). You want to create
a digest with the goal scenes and other
highlights, but you also want to keep the
original recording.
To erase chapter marks
You can combine two chapters by erasing the
chapter mark during playback.
Original
Press . PREV/NEXT > to search for a
chapter number, and while displaying the
chapter containing the chapter mark you want
to erase, press CHAPTER MARK ERASE.
The current chapter combines with the
previous chapter.
Playlist
b Note
In this case, you can compile highlight scenes
as a Playlist title. You can even rearrange the
scene order within the Playlist title.
To insert a chapter mark manually during
recording, set “Auto Chapter” to “Off” in the
“Recording” setup.
The Playlist title calls up data from the
original titles for playback. When an original
title is used for a Playlist title, the original
title cannot be edited and erased.
1 Press TITLE LIST.
If the Title List (Original) appears, press
<.
2 Press OPTIONS to select “Create a
Playlist,” and press ENTER.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “Select,” and press ENTER.
9 When you finish adding scenes, press
m.
4 Select the title you want to include in
the Playlist title, and press ENTER.
The display for setting the start point (IN)
appears. The title starts to play.
• To return to the beginning of the title,
press X PAUSE and then press
. PREV.
A Total duration of the selected
scene
B Total number of scenes
C Selected scene
10 Select the scene you want to re-edit,
and press ENTER.
The sub-menu appears.
“Move”: Changes the scene order using
</, and press ENTER.
“Erase”: Erases the scene. When asked
for confirmation, select “OK.”
• To add more scenes, press M and go to
step 5.
• To add more scenes from another title,
select “Select” and go to step 4.
• To preview all of the captured scenes in
the listed order, select “Preview.”
5 Select the IN point using m/M,
and press ENTER.
Playback pauses.
6 Press ENTER if the IN point is correct.
If the IN point is incorrect, select the IN
point using c/C, and press ENTER.
The display for setting the end point
(OUT) appears.
11 When you finish editing the scene list,
select “OK,” and press ENTER.
The title of the created Playlist is added
to the Title List (Playlist). The title name
is the title name of the first scene.
7 Select the OUT point using m/M,
and press ENTER.
Playback pauses.
8 Press ENTER if the OUT point is
z Hint
correct.
When a Playlist title is created, the IN and OUT
points will become chapter marks, and each scene
will become a chapter.
If the OUT point is incorrect, select the
OUT point using c/C, and press
ENTER.
b Note
The selected scene is added to the scene
list.
• To add more scenes, go to step 5.
The picture may pause when the edited scene is
played.
,continued
63
Download from Www.Somanuals.com. All Manuals Search And Download.
To add the entire title to the Playlist title
as one scene (Make a Playlist)
Combining multiple Playlist
titles (Combine Titles)
1
2
3
Press TITLE LIST. If the Title List
(Playlist) appears, press ,.
-
-
RVR
RWVR
Select the title and press ENTER.
The sub-menu appears.
1 Press TITLE LIST.
If the Title List (Original) menu appears,
press <.
Select “Make a Playlist,” and press
ENTER.
The selected title is added to the Title List
(Playlist).
The title name is the same as the Original
title name.
2 Press OPTIONS to select “Combine
Titles,” and press ENTER.
The display for selecting titles appears.
3 Select a title, and press ENTER.
A number indicating the order in which
you selected the title appears.
To cancel the selection, press ENTER
again.
To play the Playlist title
1
2
3
Press TITLE LIST. If the Title List
(Original) appears, press <.
Select a title, and press ENTER.
The sub-menu appears.
Select “Play,” and press ENTER.
Moving a Playlist title (Change
Order)
4 Repeat step 3 to select all of the titles
you want to combine.
-
-
RVR
RWVR
You can change the Playlist title order within
the Title List (Playlist).
To cancel all of the selections, select
“Reset.”
5 Select “OK,” and press ENTER.
The list of titles to be combined appears.
To change the selection, select “Change”
and go to step 3.
1 Press TITLE LIST.
If the Title List (Original) appears, press
<.
2 Press OPTIONS to select “Change
Order,” and press ENTER.
6 Select “OK,” and press ENTER.
The titles are combined.
3 Select the title you want to move, and
press ENTER.
z Hint
After titles are combined, the title name is the title
name of the first title prior to combination.
4 Select a new location for the title
using M/m, and press ENTER.
The title moves to the new location.
• To move more titles, go to step 3.
• To finish, select “Quit,” and press
ENTER.
b Note
When the number of chapters in the title to be
combined exceeds the limit, the chapters at the end
are combined into a single chapter.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Dividing a Playlist title (Divide
Title)
-
-
RVR
RWVR
You can divide a Playlist title.
1 Press TITLE LIST.
If the Title List (Original) appears, press
<.
2 Select a title, and press ENTER.
The sub-menu appears.
3 Select “Divide Title,” and press
ENTER.
The display for setting the dividing point
appears, and the title starts to play.
• To return to the beginning of the title,
press X PAUSE and then press
. PREV.
4 Select the dividing point by pressing
m/M, and press ENTER.
Playback pauses.
5 Press ENTER if the dividing point is
correct.
If the dividing point is incorrect, select
the dividing point using c/C, and
press ENTER.
The display asks for confirmation.
• To change the dividing point, press M.
6 Select “OK,” and press ENTER.
The title is divided in two.
z Hint
After a title is divided, the title name prior to
division is assigned to both the first and second
parts.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• You cannot make a recording while DV dubbing.
• The DV IN jack is for input only. It will not
output signals.
DV/Digital8 Dubbing
• You cannot use the DV IN jack when:
– signal input to the DV IN jack on the front panel
or recorder operation cannot be performed
correctly when using a digital video camera
camera to the LINE IN jack and follow the
instructions of “Recording from connected
– the input signal is not in DVC-SD format. Do
not connect a MICRO MV format digital video
camera even if it has an i.LINK jack.
– the images on the tape contain copy protection
signals, which limit recording.
Before DV/Digital8
Dubbing
This section explains dubbing with a digital
video camera via the DV IN jack on the front
panel. If you want to dub by way of the LINE
IN jacks, see “Recording from connected
The DV IN jack on this recorder conforms to
the i.LINK standard.
• If you want to play the disc on other DVD
Follow the instructions in “Preparing for DV/
Digital8 dubbing,” and then move on to the
section on dubbing. For more information
about i.LINK, see “About i.LINK” on
Hookups
DVD recorder
Preparing for DV/Digital8
dubbing
to DV IN
You can connect a digital video camera to the
DV IN jack on the recorder to record or edit
from a DV/Digital8 format tape. Operation is
straightforward because the recorder will fast
forward and rewind the tape for you – you do
not need to operate your digital video camera.
Do the following to start using the “DV/D8
Edit” functions of this recorder.
i.LINK cable (not supplied)
DV output
See the instruction manual supplied with the
digital video camera as well before
connecting.
Digital video camera
z Hint
If you plan to do additional editing on a disc after
the initial dub, use the DV IN jack and record on a
DVD-RW/DVD-R (VR mode).
: Signal flow
1 Insert a disc.
2 Insert the source DV/Digital8 format
tape into your digital video camera.
For the recorder to record or edit, your
digital video camera must be set to video
playback mode.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
3 Press INPUT SELECT on the remote
repeatedly to select “DV.”
The front panel display changes as
follows:
• You cannot connect more than one piece of
digital video equipment to the recorder.
• You cannot control the recorder using another
device or another recorder of the same model.
• You cannot record date, time, or the contents of
the cassette memory onto the disc.
channel
• If you record from a DV/Digital8 format tape that
is recorded in multiple sound tracks, such as a
tape with multiple sampling frequencies (48 kHz,
44.1 kHz, or 32 kHz), no sound or an unnatural
sound will be output when playing back the
sampling frequency switch point on the disc.
• In order to use this recorder’s “Auto Chapter”
on your digital video camera before shooting.
• The recorded picture may be momentarily
affected or the start and end points of a program
may be different from what you have set if the
source DV/Digital8 format tape is in any of the
following conditions. In this case, see “Recording
4 Press REC MODE on the remote
repeatedly to select the recording
mode.
The recording mode changes as follows:
For details about the recording mode, see
5 Press OPTIONS on the remote to
select “DV / D8 Audio Input,” and
press ENTER. Then, select the setting
for the audio input.
– There is a blank space in the recorded portion of
the tape.
– The tape’s time code is not sequential.
– If the picture size or the recording mode on the
tape being dubbed changes.
“Stereo1” (default): Records original
sound only. Normally select this when
dubbing a DV format tape.
“Mix”: Records both stereo 1 and 2.
“Stereo2”: Records additional audio
only.
Select “Mix” or “Stereo2” only if you
have added a second audio channel when
recording with your digital video camera.
You are ready to start dubbing. Select
one of the dubbing methods on the
following pages.
6 Adjust the dubbing picture quality and
size.
Before dubbing starts, press OPTIONS
to select “Rec Settings,” and adjust the
z Hint
You can turn off the recorder during dubbing. The
recorder completes dubbing even after being turned
off.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording an Entire DV
Format Tape (One Touch
Dubbing)
Program Edit
+
RW
-
-
+
-
RVR
RWVR RWVideo
R
-
RVideo
You can select scenes from a DV/Digital8
format tape, and then automatically record
selected scenes to a DVD.
-
RVR
+
RW
-
-
+
R
RWVR RWVideo
-
RVideo
To use this function, do the following:
You can record the entire contents of a DV/
Digital8 format tape onto a disc with a single
press of the ONE-TOUCH DUB button on
the recorder. The recorder controls the digital
video camera for the whole process, and
completes the recording.
Connect your digital video camera and
prepare for recording
m
Select and edit the scenes you want to dub
Using the recorder’s remote control, fast
forward or rewind the tape to select the
scenes. At this point, the selected scenes are
not copied to the disc. The recorder only
remembers the IN and OUT points of the
scenes that you selected for dubbing. You can
also erase or change the order of the scenes.
m
How chapters are created
The contents dubbed to DVD become a
single title. When “Auto Chapter” is set to
“On” in the “Recording” setup, this title is
divided into chapters. When dubbing a DVD-
RW/DVD-R (VR mode), each shooting
session on the tape becomes a chapter on the
disc. For other discs, the recorder divides the
title into chapters at approximately 6 minute
intervals.
Dub the selected scenes
Follow steps 1 to 6 of “Preparing for DV/
Digital8 dubbing” on page 66, and press
ONE-TOUCH DUB on the recorder.
The recorder rewinds the tape and then starts
recording the tape contents.
After you have selected the scenes, the
recorder will fast forward and rewind the tape
automatically and record the scenes to a
DVD.
How chapters are created
When the recording is finished, the recorder
rewinds the tape in the digital video camera.
The contents dubbed to DVD become a
single title. When “Auto Chapter” is set to
“On” in the “Recording” setup, this title is
divided into chapters. When dubbing to a
DVD-RW/DVD-R (VR mode), each
shooting session on the tape and each
selected scene becomes a chapter on the disc.
For other discs, the recorder divides the title
into chapters at approximately 6 minute
intervals.
To stop during recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
z Hint
If you set “Finalize Disc” of “One Touch Dubbing”
recorded disc (except DVD-RW (VR mode)) will
automatically be finalized after recording is
finished.
press SYSTEM MENU.
b Notes
• When a blank space between the recordings on
the tape continues for more than five minutes,
One Touch Dubbing ends automatically.
• The recorder records a blank for five minutes
before it stops dubbing. To stop the blank
recording, press x REC STOP.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Select “DV / D8 EDIT,” and press
ENTER.
8 When you finish adding scenes, press
m.
The display asks if you want to start
selecting scenes.
The scene list is displayed.
• If you have previously saved a
program, the display asks if you want to
edit an existing program or to create a
new program. To resume editing the
existing program, select “Saved Data,”
and go to step 9.
A Total duration of the program
B Total number of scenes
C Scene information block
3 Select “Start,” and press ENTER.
The display for setting the IN point (start
of the scene) appears.
9 Select the scene information block
you want to edit using </,, and
press ENTER.
The scene starts to play.
The sub-menu appears.
“Move”: Changes the scene order using
</, and ENTER.
“Erase”: Erases the scene. When asked
for confirmation, select “OK.”
“Preview”: Plays the selected scene.
• To add more scenes, press M and go to
step 4.
10 When you finish editing the scene list,
select “OK,” and press ENTER.
The display for entering the title name
appears. To enter a new name, select
“Enter,” and follow the explanations on
4 Select the IN point using m/M,
and press ENTER.
Playback pauses.
5 Press ENTER if the IN point is correct.
If the IN point is incorrect, select the IN
point using c/C, and press ENTER.
The display for setting the OUT point
(end of the scene) appears.
6 Select the OUT point using m/M,
and press ENTER.
Playback pauses.
7 Press ENTER if the OUT point is
correct.
If the OUT point is incorrect, select the
OUT point using c/C, and press
ENTER.
The selected scene is added to the scene
information block.
• To add more scenes, go to step 4.
,continued
69
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
11 Select “OK,” and press ENTER.
The title name is fixed, and the display
asks if you want to start recording.
To change the dubbing mode, select
“Dub Mode” and press M/m.
• If you set the beginning of the tape as the IN point
and the end point as the OUT point, the IN and
OUT points may move slightly during dubbing.
• You cannot set a scene to be shorter than one
second.
Data capacity required for the dubbing.
This is displayed in red when the size
exceeds the available space on the
dubbing target media.
12 Select “Start,” and press ENTER.
The recorder starts recording the tape
contents as programmed.
To stop during recording
Press x REC STOP.
Note that it may take a few seconds for the
recorder to stop recording.
To automatically adjust the dubbing mode
If there is not enough available space on the
target disc, the recorder automatically selects
a dubbing mode with lower picture quality
according to the available space. The same
dubbing mode is set for all of the titles. If disc
space is insufficient for the selected dubbing
mode, the following display appears after
step 12.
Select “OK” and go to step 12.
If you do not want to change the dubbing
mode, select “Cancel.” However, note that
dubbing will end before the program is
finished.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Select “Tuner Preset” in “Basic,” and
press ENTER.
Settings and Adjustments
Antenna Reception and
Language Settings
(Basic)
The “Basic” setup helps you to make tuner,
clock, and channel settings for the recorder.
Select “Antenna / Cable,” and press
ENTER.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Basic,” and press ENTER.
The options for “Basic” appear. The
default settings are underlined.
To turn off the display, press SYSTEM
MENU repeatedly.
Antenna
Cable
Presets VHF and UHF
channels.
Presets cable TV
channels.
3
4
Select an option, and press ENTER.
Select “Auto Preset,” and press ENTER.
All receivable channels are preset in
numerical sequence.
Manual Channel Setup
Presets or disables channels manually.
If some channels could not be set using the
“Auto Preset” or “Easy Setup” function, you
can set them manually.
Tuner Preset
b Note
You cannot preset channels for the connected cable
box or satellite receiver.
1
Select “Tuner Preset” in “Basic,” and
press ENTER.
Auto Preset
Automatically presets the receivable
channels. The recorder can receive VHF
channels 2 to 13, UHF channels 14 to 69, and
unscrambled CATV channels 1 to 125. First,
we recommend that you preset the receivable
channels in your area using automatic
presetting methods.
,continued
71
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Select “Antenna / Cable,” and press
ENTER.
8 Press , to select “AFT.”
On
Off
Turns on the Auto Fine
Tuning function.
Normally, select this.
Antenna
Cable
Presets VHF and UHF
channels.
Allows you to adjust the
picture manually.
Presets cable TV
channels.
9
Select “On” to turn on AFT, and press
ENTER.
3
4
Select an option, and press ENTER.
Select “Manual Channel Setup,” and
press ENTER.
• If the Auto Fine Tuning function does
not work effectively, select “Off” in
step 8 and press ,. Press M/m to
obtain a clearer picture, and press
ENTER.
10 To preset or disable another channel,
repeat from step 5.
Clock
5
Press M/m to select the channel you want
to activate, and press ENTER.
Auto (Auto Clock Set)
Turns on the Auto Clock Set function when a
channel in your local area broadcasts a time
signal.
1
Select “Clock” in “Basic,” and press
ENTER.
2
Select “Auto,” and press ENTER.
6
7
Press </, to select “Activate
Channel,” and press ENTER.
The disabled channel will be skipped
when you press CH +/–.
Yes
No
Activates the channels.
Disables the channels.
Press M/m to select “Yes” to activate the
channel.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select “Full Auto,” and press ENTER.
Daylight Saving
Select “On” or “Off” (standard time), or
select “Auto” to have the recorder
automatically set the daylight saving
time.
Yes
Automatically sets your
time zone and Daylight
Saving Time (if
applicable).
z Hint
No
Allows you to adjust
your time zone and
Daylight Saving Time
manually, without
turning off the Auto
Clock Set function.
If you set “Full Auto” to “Yes,” the Auto Clock Set
function is activated whenever the recorder is
turned off.
Manual (Manual Clock Set)
If the Auto Clock Set function did not set the
clock correctly for your local area, set the
clock manually.
4
Select “Yes,” and press ENTER.
The recorder automatically sets the clock
by searching for a channel that carries a
time signal and sets your time zone and
Daylight Saving Time (if applicable).
• If the clock does not activate, your
clock setting is incorrect. After
1
Select “Clock” in “Basic,” and press
ENTER.
2
Select “Manual,” and press ENTER.
repeating steps 1 to 3 above, select
“No” in step 4 and press ENTER. Then
select “Clock Set CH,” “Time Zone,”
or “Daylight Saving” and press
ENTER. Adjust these settings by
pressing M/m and ENTER.
Clock Set CH
Select a channel that carries a time signal
using the number buttons.
3
4
Press M/m to set the month, and press
,.
Set the day, year, hour, and minutes in
sequence. Press </, to select the item
to be set, then press M/m to set the
numbers. The day of the week is set
automatically.
Use this option if you know of a channel
that carries a time signal. Most PBS
member stations broadcast a time signal.
For the fastest response select your local
PBS station. Leave the setting at “--” to
have the recorder automatically search
for a channel that carries a time signal.
To return to “--,” enter “0.”
Press ENTER to start the clock.
z Hint
To change the numbers in step 3, press < to return
to the item to be changed, and select the numbers by
pressing M/m.
OSD (On-Screen Display)
Switches the display language on the screen.
Time Zone
Select the time zone for your area, or
select “Auto” to have the recorder
automatically set your time zone.
The options are:
Auto y Atlantic y Eastern y
Central y Mountain y Pacific y
Alaska y Hawaii y Auto
73
Download from Www.Somanuals.com. All Manuals Search And Download.
16:9
Video Settings (Video)
Video settings will adjust items related to the
image, such as size and color.
Choose the settings according to the type of
TV, tuner, or decoder connected to the DVD
recorder.
4:3 Letter Box
4:3 Pan Scan
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
b Note
3 Select “Video,” and press ENTER.
The “Video” setup appears with the
following options. The default settings
are underlined.
Depending on the disc, “4:3 Letter Box” may be
selected automatically instead of “4:3 Pan Scan” or
vice versa.
Y/Pb/Pr Out Black Level
Selects the black level (setup level) for the
video signals output from the
COMPONENT VIDEO OUT jacks
This setting is not effective when the recorder
outputs progressive signals.
On
Off
Raises the standard black
level. Select this when the
picture appears too dark.
Video Output
Sets the black level of the
output signal to the standard
level. Normally, select this.
TV Type
Sets the picture size when playing back a title
16:9 size commercial DVD video.
Progressive Output
If your TV accepts progressive (480p) format
signals, set “Progressive Output” to “On.”
You will enjoy accurate color reproduction
and high quality images.
Select the playback picture size according to
the type of connected TV (wide-screen/wide
mode TV or conventional 4:3 screen TV).
16:9
Select this when connecting
to a wide-screen TV or TV
with a wide mode function.
1
2
3
Select “Progressive Output,” and press
ENTER.
Select “On,” and press ENTER.
The display asks for confirmation.
4:3 Letter
Box
Select this when connecting
to a 4:3 screen TV. Displays a
wide picture with bands on
the upper and lower portions
of the screen.
Select “Start,” and press ENTER.
The video switches to a progressive
signal for 5 seconds.
4
If video signal appears OK, select “Yes,”
and press ENTER.
4:3 Pan
Scan
Select this when connecting
to a 4:3 screen TV.
Automatically displays a
wide picture on the entire
screen and cuts off the
portions that do not fit.
If picture is distorted, select “No,” and
press ENTER.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Progressive Mode
Pause Mode (DVDs only)
DVD software can be divided into two types:
film based software and video based
software. Video based software is derived
from TV and displays images at 30 frames/60
fields per second. Film based software is
derived from film and displays images at 24
frames per second. Some DVD software
contains both Video and Film.
In order for these images to appear natural on
your screen when output in progressive
mode, the progressive video signal needs to
be converted to match the type of DVD
software that you are watching.
You can fine-tune the progressive 480p video
signal that is output when you set
“Progressive Output” to “On.”
Note that you must connect to a progressive
format TV using the COMPONENT VIDEO
Selects the picture quality in pause mode.
Auto
The picture, including
subjects that move
dynamically, is output with
no jitter. Normally select this
position.
Frame
The picture, including
subjects that do not move
dynamically, is output in high
resolution.
Auto Display
On
Automatically displays
information on the screen
when the recorder is turned
on, etc.
Off
Displays information only
when DISPLAY is pressed.
Auto
Automatically detects the
software type (Film-based or
Video-based) and selects the
appropriateconversionmode.
Normally select this position.
Screen Saver
The screen saver image appears when you do
not use the recorder for more than 10 minutes
while an on-screen display, such as the
System Menu, is displayed on your TV
screen. The screen saver image helps prevent
your display device from becoming damaged
(ghosting).
Video
Fixes the conversion mode to
the mode for Video-based
software.
b Note
When picture noise appears after you set the
recorder to progressive format, hold down
x STOP, and press CHANNEL – (minus) on the
unit.
On
Turns on the screen saver
function.
Off
Turns off the function.
Line Input
Sets the method of inputting video signals
from the LINE IN jacks on the rear panel of
the recorder. Select an option for each of the
items below according to the combination of
jacks and methods that you are going to use.
Line1 Input
Selects a method of inputting video signals
for the LINE 1 IN jack on the rear panel of the
recorder.
Video
Inputs video signals.
Inputs S video signals.
S Video
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio ATT (attenuation)
If the playback sound is distorted, set this
item to “On.” The recorder reduces the audio
output level.
This function affects the output of the
following jacks:
Audio Settings (Audio)
The “Audio” setup allows you to adjust the
sound according to the playback and
connection conditions.
– LINE OUT R-AUDIO-L jacks
On
Select this when the playback
sound from the speakers is
distorted.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
Off
Normally select this position.
3 Select “Audio,” and press ENTER.
The “Audio” setup appears with the
following options. The default settings
are underlined.
Audio Connection
The following setup items switch the method
of outputting audio signals when you connect
a component such as an amplifier (receiver)
with a digital input jack.
For connection details, see “Step 3:
Select “Dolby Digital,” “DTS,” and “48kHz/
96kHz PCM” after setting “Digital Out” to
“On.”
If you connect a component that does not
accept the selected audio signal, a loud noise
(or no sound) will come out from the
speakers, and may affect your ears or cause
speaker damage.
Auto Stereo
This function is effective only when “Tuner
Audio” is set to “Main.”
1
Select “Audio Connection” in “Audio,”
and press ENTER.
On
Receives stereo programs.
Normally select this.
Off
Select this to reduce noise.
The sound changes to
monaural.
Tuner Audio
Selects the sound to be recorded.
2
3
Select “Digital Out,” and press ENTER.
Main
SAP
Records only the main
sound.
On
Normally select this
position.
Records only the SAP
(Second Audio Program)
sound.
Off
The influence of the
digital circuit upon the
analog circuit is
minimal.
b Note
If no SAP sound is received, the main sound is
recorded regardless of the setting.
Select “On,” and press ENTER.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Set the digital output signal.
Audio DRC (Dynamic Range Control)
(DVDs only)
• Dolby Digital (DVDs only)
Selects the dynamic range (difference
between soft and loud sounds) setting when
playing a DVD that conforms to Audio DRC.
This affects the output from the following
jacks:
– LINE OUT R-AUDIO-L jacks
– DIGITAL OUT (COAXIAL) jack only
when “Dolby Digital” is set to “D-PCM”
(page 76).
Selects the type of Dolby Digital signal.
D-PCM
Select this when the recorder
is connected to an audio
component lacking a built-in
Dolby Digital decoder. The
surround effects of output
signals are determined by the
“Downmix” setting item in
the “Audio” setup.
Standard
TV Mode
Normally select this position.
Dolby
Digital
Select this when the recorder
is connected to an audio
component with a built-in
Dolby Digital decoder.
Makes low sounds clear even
if you turn the volume down.
Wide
Range
Gives you the feeling of
being at a live performance.
• DTS (DVD VIDEOs only)
Selects whether or not to output DTS signals.
On
Select this when the recorder
is connected to an audio
component with a built-in
DTS decoder.
Downmix (DVDs only)
Switches the method for mixing down to two
channels when you play a DVD which has
rear sound elements (channels) or is recorded
in Dolby Digital format. For details on the
rear signal components, see “4. Displaying
Information” on page 30. This function
affects the output of the following jacks:
– LINE OUT R-AUDIO-L jacks
Off
Select this when the recorder
is connected to an audio
component without a built-in
DTS decoder.
• 48kHz/96kHz PCM (DVD VIDEOs only)
Selects the sampling frequency of the audio
signal.
– DIGITAL OUT (COAXIAL) jack when
“Dolby Digital” is set to “D-PCM”
(page 76).
48kHz/
16bit
The audio signals of DVD
VIDEOs are converted to 48
kHz/16 bit and output.
Dolby
Surround
Normally select this position.
Multi-channel audio signals
are output to two channels for
enjoying surround sounds.
96kHz/
24bit
All signals containing
96 kHz/24 bit are output
without conversion.
However, the signals are
output at 48 kHz/16 bit if
copyright-protected signals
are contained.
Normal
Multi-channel audio signals
are downmixed to two
channels for use with your
stereo.
b Note
“48kHz/96kHz PCM” setting has no effect when
audio signals are output from the LINE OUT (R-
AUDIO-L) jacks. If the sampling frequency is
96kHz, signals are simply converted to analog
signals and output.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
• The actual chapter mark interval may vary
depending on the amount of information
contained in the video to be recorded.
• Chapter marks are automatically inserted where
the recordings start on the tape when “Auto
Chapter” is set to “On” during DV/Digital8
dubbing to a DVD-RW/DVD-R (VR mode).
Recording Settings
(Recording)
The “Recording” setup allows you to adjust
recording settings.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Recording,” and press
ENTER.
The “Recording” setup appears with the
following options. The default settings
are underlined.
Timer Settings
Rec Mode Adjust
On
Automatically adjusts the
recording mode to enable the
entire program to be
recorded (page 41).
Off
Turns off the function.
Auto Chapter
Selects whether to automatically divide a
recording (a title) into chapters during
recording or dubbing.
On
Inserts chapter marks at
approximately 6 minute
intervals.
Off
No chapter mark is inserted.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
• When you have already registered a
password, the display for entering the
password appears.
Disc Settings (DVD)
The “DVD” setup allows you to adjust
parental control, language and other DVD
related settings.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2
3
4
Enter your four-digit password using the
number buttons, then select “OK” and
press ENTER.
2 Select “SETUP,” and press ENTER.
3 Select “DVD,” and press ENTER.
The “DVD” setup appears with the
following options. The default settings
are underlined.
Select “Standard,” and press ENTER.
The selection items for “Standard” are
displayed.
Parental Control (DVD VIDEO only)
Playback of some DVD VIDEOs can be
limited according to a predetermined level,
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
1
Select “Parental Control” in “DVD,” and
press ENTER.
Select a geographic area as the playback
limitation level, and press ENTER.
The area is selected.
• When you select “Others,” press the
number buttons to select and enter an
select “OK” and press ENTER.
• If you have not entered a password, the
display for registering a new password
appears.
,continued
79
Download from Www.Somanuals.com. All Manuals Search And Download.
z Hint
5
Select “Level,” and press ENTER.
The selection items for “Level” are
displayed.
If you select “Others” in “DVD Menu,” “Subtitle,”
or “Audio,” select and enter a language code from
“Language Code List” on page 95 using the number
buttons.
b Note
If you select a language in “DVD Menu,”
“Subtitle,” or “Audio” that is not recorded on the
DVD VIDEO, one of the recorded languages will
be automatically selected.
The lower the value, the stricter the
limitation.
Discs rated higher than the selected level
will be restricted.
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting
in VR mode or Video mode, whichever is
selected below, when a new, unformatted
DVD-RW is inserted.
6
Select the level, and press ENTER.
The Parental Control setting is complete.
VR
Automatically formats the
disc in VR mode.
To cancel the Parental Control setting for
the disc, set “Level” to “Off” in step 6.
To change the password, select
Video
Automatically formats the
disc in Video mode.
“Password” in step 3, and press ENTER.
When the display for registering a
password appears, enter a new four-digit
password using the number buttons, then
select “OK” and press ENTER.
One Touch Dubbing
Displays the following options for the One
Touch Dub function.
Finalize Disc (for all recordable discs
except DVD-RW in VR mode)
Selects whether or not to finalize the disc
automatically following One Touch Dubbing
b Notes
• If you forget your password, you will have to
reset it by selecting “Parental Control” of
“Factory Setup” in the “Others” setup (page 81).
• When you play discs which do not have the
Parental Control function, playback cannot be
limited on this recorder.
Auto
Automatically finalizes the
disc following One Touch
Dubbing.
• Depending on the disc, you may be asked to
change the Parental Control level while playing
the disc. In this case, enter your password, then
change the level.
Manual
Allows you to finalize the
disc manually.
Language (DVD VIDEO only)
DVD Menu
Switches the language for the DVD menu.
Audio
Switches the language of the sound track.
When you select “Original,” the language
given priority in the disc is selected.
Subtitle
Switches the language of the subtitles
recorded on the disc.
When you select “Audio Follow,” the subtitle
language changes according to the language
you selected for the sound track.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Factory Setup
Allows you to select the setup settings by
group, and return them to their default
settings. Note that all of your previous
settings will be lost.
Remote Control Settings/
Factory Settings (Others)
The “Others” setup allows you to set up other
operational settings.
1
Select “Factory Setup” in “Others,” and
press , or ENTER.
The display for selecting a group of
settings appears.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2
Select the group of settings you want to
return to default from “Basic,” “Video,”
“Audio,” “Recording,” “DVD,”
“Others,” “Parental Control,” and “All,”
and press , or ENTER.
2 Select “SETUP,” and press ENTER.
3 Select “Others,” and press ENTER.
The “Others” setup appears with the
following options. The default settings
are underlined.
3
4
Select “Start,” and press ENTER.
The selected settings return to their
default settings.
Press ENTER when “Finish” appears.
Power Save Standby
Selects whether this recorder is in power save
mode and adjusts the lighting of the front
panel display.
On
Off
Sets to power save mode to
make the lighting dark.
Turn off the lighting when the
power is off.
Does not set to power save
mode and make the lighting
bright.
Command Mode
Changes the Command Mode of the recorder
if other DVD equipment is assigned the same
Command Mode. For details, see “If you
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Setup
(Resetting the Recorder)
Select this to run the “Easy Setup” program.
1 Press SYSTEM MENU while the
recorder is in stop mode.
2 Select “SETUP,” and press ENTER.
3 Select “Easy Setup,” and press
ENTER.
4 Select “Start.”
5 Follow the instructions for “Easy
82
Download from Www.Somanuals.com. All Manuals Search And Download.
, Even if your TV is compatible with
progressive format (480p) signals, the
image may be affected when you set the
recorder to progressive format. In this case,
hold down x STOP, and press
CHANNEL – (minus) on the unit and the
recorder is set to normal (interlace) format.
, When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
Additional Information
Troubleshooting
If you experience any of the following
difficulties while using the recorder, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
There is no picture or the picture noise
appears when connected to the DV IN
jack.
Power
, Try the following:
1Turn the recorder off and on again.
2Turn the connected equipment off and on
again. 3Disconnect and then connect the
i.LINK cable again.
The power does not turn on.
, Check that the AC power cord is connected
securely.
Picture
TV program reception does not fill the
screen.
, Set the channel manually in “Tuner Preset”
, Select the correct source using the INPUT
SELECT button, or select a channel of any
TV program using the CH +/– buttons.
There is no picture.
, Re-connect all connecting cords securely.
, The connecting cords are damaged.
, Switch the input selector on your TV (such
as to “VCR”) so that the signal from the
recorder appears on the TV screen.
, When playing a double-layer DVD, the
video and audio may be momentarily
interrupted at the point where the layers
switch.
TV program pictures are distorted.
, Reorient the TV antenna.
, Adjust the picture (see the TV’s instruction
manual).
, Place the recorder and TV farther apart.
, Place the TV and any bunched antenna
cables farther apart.
, The antenna cable is connected to the VHF/
UHF OUT jack on the recorder. Connect
the cable to the VHF/UHF IN jack.
Picture noise appears.
, If the picture output signal from your
recorder passes through your VCR to get to
your TV, or if you are connected to a
combination TV/VIDEO player, the copy-
protection signal applied to some DVD
programs could affect picture quality. If you
still experience this problem even when you
connect your recorder directly to your TV,
try connecting your recorder to your TV’s S
VIDEO input.
TV channels cannot be changed.
, A timer recording started, which changed
the channels.
, You have set the recorder to progressive
format even though your TV cannot accept
the progressive signal. In this case, hold
down x STOP, and press CHANNEL –
(minus) on the unit.
,continued
83
Download from Www.Somanuals.com. All Manuals Search And Download.
, The recorder is in reverse play, fast-
forward, slow motion, or pause mode.
, If the audio signal does not come through
the DIGITAL OUT (COAXIAL) jack,
check the “Audio Connection” settings in
the “Audio” setup (page 76).
The picture from equipment connected to
the recorder’s input jack does not appear
on the screen.
, If the equipment is connected to the LINE 1
IN jack, select “L1” in the front panel
display by pressing CH +/– or INPUT
SELECT.
Sound distortion occurs.
, Set “Audio ATT” in the “Audio” setup to
If the equipment is connected to the LINE 2
IN jacks, select “L2” in the front panel
display by pressing CH +/– or INPUT
SELECT.
Sound is noisy.
If the equipment is connected to the DV IN
jack, (this is usually for a digital video
camera connection), select “DV” in the
front panel display by pressing INPUT
SELECT.
, When playing a CD with DTS sound tracks,
noise will come from the LINE OUT R-
, When an S video cable is connected to the
recorder’s LINE 1 IN jack, set “Line1
Input” of the “Line Input” to “S Video” in
The sound volume is low.
, The sound volume is low on some DVDs.
The sound volume may improve if you set
“Audio DRC” in the “Audio” setup to “TV
Mode” (page 77).
, Set “Audio ATT” in the “Audio” setup to
The playback picture or TV program from
the equipment connected through the
recorder is distorted.
, If the playback picture output from a DVD
player, VCR, or tuner goes through your
recorder before reaching your TV, the copy-
protection signal applied to some programs
could affect picture quality. Disconnect the
playback equipment in question and
connect it directly to your TV.
An alternate audio track cannot be
recorded or played.
, Second Audio Program (SAP) is not
available for all programs. The program you
are recording does not have a second audio
program.
, You have set “Tuner Audio” in the “Audio”
record alternate audio programs.
, If you have connected an AV amplifier to
the DIGITAL OUT (COAXIAL) jack and
want to change the audio track for DVD-
RWs/DVD-Rs (VR mode) during playback,
set “Dolby Digital” of the “Audio
Connection” in the “Audio” setup to “D-
The picture does not fill the screen.
, Set “TV Type” of the “Video Output” in the
“Video” setup in accordance with the
screen size of your TV (page 74).
The picture does not fill the screen, even
though the picture size is set in “TV Type”
of the “Video Output” in the “Video”
setup.
, The picture size of the title is fixed.
Playback
The recorder does not play any type of
disc.
, The disc is upside down. Insert the disc with
the labeled side facing up.
Sound
There is no sound.
, Re-connect all connections securely.
, The connecting cord is damaged.
, The input source setting on the amplifier or
the connection to the amplifier is incorrect.
, The disc is not correctly inserted.
, Moisture has condensed inside the recorder.
In this case, if the recorder is on, leave it on
(if it is off, leave it off) for about an hour
until the moisture evaporates.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
, If the disc was recorded on another recorder
recorder cannot play the disc.
, You are trying to change the angles when
” does not appear on the TV screen
“
, The DVD VIDEO prohibits changing
angles.
, Try changing the angle using the DVD
VIDEO’s menu.
, The angles cannot be changed for the titles
recorded on this recorder.
, The angles cannot be changed during slow
motion playback or when playback is
paused.
The recorder does not start playback from
the beginning.
, You have inserted a DVD whose Title menu
or DVD menu automatically appears on the
TV screen when it is first inserted. Use the
menu to start playback.
The recorder starts playing automatically.
, The DVD VIDEO features an auto
playback function.
The MP3 audio tracks do not play.
, The MP3 audio tracks are not recorded in a
Playback stops automatically.
, If the DVD has an auto pause signal, the
recorder stops playback at the auto pause
signal.
The JPEG image files do not play.
, The JPEG image files are not recorded in a
, Progressive JPEG images cannot be played.
Some functions such as Stop, Search, or
Slow-motion Play cannot be performed.
, Depending on the DVD, you may not be
able to do some of the operations above. See
the instruction manual supplied with the
disc.
Recording/Timer recording/
Editing
The channel cannot be changed from the
channel you are recording.
, Set the TV’s input source to “TV.”
The language for the sound track cannot
be changed.
, Multilingual tracks are not recorded on the
DVD being played.
, The DVD VIDEO prohibits the changing of
the language for the sound track.
, Try changing the language using the DVD
VIDEO’s menu.
Recording does not start immediately
after you press z REC.
, Operate the recorder only after “LOAD,”
“FORMAT,” or “INFOWRITE” disappears
from the front panel display.
Nothing was recorded even though you set
the timer setting correctly.
, There was a power failure during recording.
, The recorder’s internal clock stopped due to
a power failure that lasted for more than 1
, The channel was disabled after the timer
recording was set. See “Tuner Preset” on
, Disconnect the AC power cord from the AC
outlet, and connect it again.
The subtitle language cannot be changed
or turned off.
, Multilingual subtitles are not recorded on
the DVD VIDEO.
, The DVD VIDEO prohibits changing of the
subtitles.
, Try changing the subtitle using the DVD
VIDEO’s menu.
, The subtitles cannot be changed for the
titles recorded on this recorder.
, The program contains copy protection
signals that restrict copying.
, The timer setting overlapped another
setting that was set later.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
VIDEO being played.
, There is no DVD inside the recorder.
,continued
85
Download from Www.Somanuals.com. All Manuals Search And Download.
, There is not enough disc space for the
recording.
, The recorder is connected to the TV output
jack of the connected equipment.
, A separate recording was in the process of
being made without the use of the timer
, The recorder was in the process of DV/
Digital8 Dubbing.
Synchro-Recording does not complete.
, The timer setting for the connected
equipment overlapped the recorder’s timer
, There was a power failure during the
recording.
Recording does not stop immediately
after you press x REC STOP.
, It will take a few seconds for the recorder to
input disc data before recording can stop.
The recorder automatically starts
recording when the satellite receiver is
turned on.
, The Synchro-Rec function was activated.
Turn off the satellite receiver and cancel the
Recording does not stop after you press
x STOP.
, Press x REC STOP.
Timer recording is not complete or did not
start from the beginning.
Display
, There was a power failure during recording.
If the power recovers when there is a timer
recording, the recorder resumes recording.
Should the power failure continue for more
than 1 hour, reset the clock (page 72).
, Disc space was not enough.
The clock has stopped.
, The clock stopped due to a power failure
that lasted for more than 1 hour. Reset the
The TIMER REC indicator is flashing.
, The disc does not have enough space.
, Insert a recordable disc inside the recorder.
Contents previously recorded were
erased.
, Data that is not playable on this recorder but
was recorded on a DVD with a PC will be
erased from the disc when the disc is
inserted.
The recording mode indication is
incorrect.
, When the recording or dubbing is less than
ten minutes, or if a picture with little
movement is displayed for more than ten
minutes, the recording mode indication may
be displayed incorrectly. Note that the
actual recording or dubbing itself was
correctly made in the selected recording
mode.
Recording from the equipment
with a timer
Nothing was recorded even though you set
the Synchro-Rec setting correctly.
, You forgot to turn off the connected
equipment. Turn off the connected
equipment and set the recorder to Synchro-
, After playing titles recorded in EP and SLP
mode, the recording mode indication may
change depending on the recorded program.
, The recorder was not set to the Synchro-
Recording standby mode. Press
The clock does not appear in the front
panel display when the recorder is turned
off.
, “Power Save Standby” in the “Others”
recorder is in standby mode.
c z SYNCHRO REC to have the recorder
stand by for recording. Make sure the
SYNCHRO REC indicator lights up on the
, The equipment is not connected to the LINE
1 IN jacks of the recorder.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
The disc tray does not open and “TRAY
LOCKED” appears in the front panel
display.
, Contact your Sony dealer or local
authorized Sony service facility.
Remote control
The remote does not function.
, Batteries are weak.
, The remote is too far from the recorder.
, The remote’s manufacturer code returned to
the default setting when you replaced the
, The remote is not pointed at the remote
sensor on the recorder.
, Different command modes are set for the
recorder and remote. Set the same
command mode setting for this recorder and
the supplied remote is DVD3.
The disc tray does not open and you
cannot remove the disc after you press
Z OPEN/CLOSE.
, Turn off the recorder. Once the clock
appears in the front panel display,
disconnect the AC power cord. (If the
recorder does not turn off or if the clock
does not appear in the front panel display,
disconnect the AC power cord anyway.)
Connect the AC power cord again while
pressing down A on the recorder, and
release the button when the disc tray opens.
Then, keep [/1 on the recorder pressed for
about ten seconds until “WELCOME”
appears in the front panel display.
, Press x STOP on the unit while the
recorder is turned off to check the current
command mode.
Others
The recorder does not operate properly.
, Restart the recorder. Press down [/1 on the
recorder for more than ten seconds until
“WELCOME” appears in the front panel
display.
, When static electricity, etc., causes the
recorder to operate abnormally, turn off the
recorder and wait until the clock appears in
the front panel display. Then, unplug the
recorder and after leaving it off for a while,
plug it in again.
“RECOVERY” appears in the front panel
display.
, The recorder’s recovery function was
activated when the recorder was turned on
because the power was turned off or failed
during recording. Leave the recorder on
until “RECOVERY” disappears from the
front panel display.
“FAN ERROR” appears in the front panel
display.
, Check that the vent on the rear of the
recorder is not blocked. Then, immediately
disconnect the AC power cord. Leave the
recorder off for a while, then re-connect the
AC power cord, and press [/1 on the
recorder.
Five numbers or letters are displayed in
the front panel display.
, The self-diagnosis function was activated
The disc tray does not open after you press
Z OPEN/CLOSE.
, It may take a few seconds for the disc tray
to open after you have recorded or edited a
DVD. This is because the recorder is adding
disc data to the disc.
Mechanical sound is heard when the
recorder is off.
, While the recorder is adjusting the clock for
the Auto Clock Set function or during a
timer recording, operational noises (such as
the internal fan) may be heard, even when
the power is off. This is not a malfunction.
The disc tray does not open and
“LOCKED” appears in the front panel
display.
, The disc tray is locked. Cancel the Child
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis Function Notes About This
(When letters/numbers
appear in the display)
Recorder
On operation
• If the recorder is brought directly from a
cold to a warm location, or is placed in a
very damp room, moisture may condense
on the lenses inside the recorder. Should
this occur, the recorder may not operate
properly. In this case, if the recorder is on,
leave it on (if it is off, leave it off) for about
an hour until the moisture evaporates.
• When you move the recorder, take out any
discs. If you don’t, the disc may be
damaged.
When the self-diagnosis function is activated
to prevent the recorder from malfunctioning,
a five-character service number (e.g., C 13
00) with a combination of a letter and four
numbers appears in the front panel display. In
this case, check the following table.
First three
Cause and/or corrective
characters of action
the service
number
C 13
The DVD is dirty.
On adjusting volume
, Clean the disc with a soft
cloth.
Do not turn up the volume while listening to
a section with very low level inputs or no
audio signals. If you do, the speakers may be
damaged when a peak level section is played.
C 31
The DVD/CD is not inserted
correctly.
, Re-insert the disc
correctly.
On cleaning
E XX
To prevent a malfunction, the
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder or solvent
such as alcohol or benzine.
(xx is a number) recorder has performed the
self-diagnosis function.
, Contact your nearest
Sony dealer or local
authorized Sony service
facility and give the five-
character service number.
Example: E 61 10
On cleaning discs, disc/lens cleaners
Do not use a commercially available
cleaning disc or disc/lens cleaner (wet or
spray type). These may cause the recorder
to malfunction.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface. Dust,
fingerprints, or scratches on the disc may
cause it to malfunction.
Specifications
System
Laser: Semiconductor laser
Channel coverage:
NTSC
VHF: 2 to 13
UHF: 14 to 69
CATV: A-8 to A-1, A to W, W+1 to
W+84
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth. Wipe
the disc from the center out.
Video reception: Frequency synthesizer
system
Audio reception: Inter carrier system
Antenna: 75-ohm antenna terminal for
VHF/UHF
Timer: Clock: Quartz locked/Timer
indication: 12-hour cycle (digital)/
Power back-up duration: 1 hour
Video recording format: MPEG-2,
MPEG-1
Audio recording format/applicable
bit rate: Dolby Digital 2 ch
256 kbps/128 kbps (in EP and SLP
mode)
• Do not use solvents such as benzine,
thinner, commercially available cleaners, or
anti-static spray intended for vinyl LPs.
• Do not use the following discs.
– A disc that has a non-standard shape (e.g.,
card, heart).
– A disc with a label or sticker on it.
– A disc that has cellophane tape or sticker
adhesive on it.
Inputs and outputs
LINE OUT
(AUDIO): Phono jack/2 Vrms/10 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
LINE 1 IN/LINE 2 IN
(AUDIO): Phono jack/2 Vrms/more than
22 kilohms
(VIDEO): Phono jack/1.0 Vp-p
(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,
C: 0.286 Vp-p
DV IN: 4-pin/i.LINK S100
DIGITAL OUT (COAXIAL): Phono jack/
0.5 Vp-p/75 ohms
COMPONENT VIDEO OUT (Y, PB
,
PR):
Phono jack/Y: 1.0 Vp-p/
PB, PR: 0.7 Vp-p
,continued
89
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements: 120 V AC, 60 Hz
Power consumption: 22 W
Dimensions (approx.):
430 × 58 × 291 mm
About i.LINK
The DV IN jack on this recorder is i.LINK-
compliant for digital video cameras. This
section describes the i.LINK standard and its
features.
3
1
(17 × 2 × 11 in.) (width/height/
8
2
depth) incl. projecting parts
Mass (approx.): 3.1 kg (6.83 lb)
Operating temperature:
5ºC to 35ºC (41ºF to 95ºF)
Operating humidity: 25% to 80%
Supplied accessories:
Audio/video cord (1)
What is i.LINK?
i.LINK is a digital serial interface for
handling digital video, digital audio and other
data in two directions between equipment
having the i.LINK jack, and for controlling
other equipment.
i.LINK-compatible equipment can be
connected by a single i.LINK cable. Possible
applications are operations and data
transactions with various digital AV
equipment. When two or more i.LINK-
compatible equipment are connected to this
recorder in a daisy chain, operations and data
transactions are possible with not only the
equipment that this recorder is connected to
but also with other devices via the directly
connected equipment.
Power cord (1)
Antenna cable (1)
Remote commander (remote) (1)
Size AA (R6) batteries (2)
Specifications and design are subject to
change without notice.
Note, however, that the method of operation
sometimes varies according to the
characteristics and specifications of the
equipment to be connected, and that
operations and data transactions are
sometimes not possible on some connected
equipment.
b Note
Normally, only one piece of equipment can be
connected to this recorder by the i.LINK cable (DV
connecting cable). When connecting this recorder
to i.LINK-compatible equipment having two or
more i.LINK jacks (DV jacks), see the instruction
manual of the equipment to be connected.
About the name “i.LINK”
i.LINK is a more familiar term for IEEE 1394
data transport bus proposed by SONY, and is
a trademark approved by many corporations.
IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
i.LINK baud rate
i.LINK’s maximum baud rate varies
according to the equipment. Three maximum
baud rates are defined:
S100 (approx. 100 Mbps*)
S200 (approx. 200 Mbps)
S400 (approx. 400 Mbps)
The baud rate is listed under “Specifications”
in the instruction manual of each equipment.
It is also indicated near the i.LINK jack on
some equipment.
The maximum baud rate of equipment on
which it is not indicated such as this unit is
“S100.”
When units are connected to equipment
having a different maximum baud rate, the
baud rate sometimes differs from the
indicated baud rate.
* What is Mbps?
Mbps stands for megabits per second, or the
amount of data that can be sent or received in one
second. For example, a baud rate of 100 Mbps
means that 100 megabits of data can be sent in
one second.
i.LINK functions on this
recorder
For details on how to dub when this recorder
is connected to other video equipment having
DV jacks, see page 66.
The DV jack on this recorder can only input
DVC-SD signals. It cannot output signals.
The DV jack will not accept MICRO MV
signals from equipment such as a MICRO
MV digital video camera with an i.LINK
jack.
For further precautions, see the notes on
For details on precautions when connecting
this recorder, also see the instruction manuals
for the equipment to be connected.
Required i.LINK cable
Use the Sony i.LINK 4-pin-to-4-pin cable
(during DV/Digital8 dubbing).
i.LINK and are trademarks.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to Parts and Controls
For more information, see the pages in parentheses.
Remote
TIMER button (40)
1
4
7
2
5
8
0
3
6
9
CHAPTER MARK ERASE button
Q
REPLAY/ADVANCE
T mc
/
CM (search/slow/
freeze frame) buttons (51)
The H PLAY button has a tactile dot*.
REC MODE button (27)
The number 5 button has a tactile dot*.
Y TV VOL (TV volume) +/– buttons
The + button has a tactile dot*.
The AUDIO button has a tactile dot*.
The + button has a tactile dot*.
* Use the tactile dot as a reference when operating
the recorder.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel
K LINE 2 IN (S VIDEO/VIDEO/
L(MONO) AUDIO R) jacks (25)
SYNCHRO REC indicator (47)
The + button has a tactile dot*.
N
DV IN jack (66)
H
(remote sensor) (20)
* Use the tactile dot as a reference when operating
the recorder.
,continued
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
DVD
VCD
SAP
• Clock
A Playing/recording status
• Channel
• Playing time/remaining time
• Current title/chapter/track/index
number
D Disc type*
E
(angle) indicator (49)
• Recording time/recording mode
* Displays DATA CDs as “CD.”
z Hint
You can turn off the front panel display when the recorder is turned off by setting “Power Save Standby” to
Rear panel
B LINE 1 IN (R-AUDIO-L/VIDEO)
jacks (16)
H COMPONENT VIDEO OUT (Y, PB,
E LINE OUT (R-AUDIO-L/VIDEO)
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volap k
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703
Not specified
Area Code
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2092 China
2115 Denmark
2501 Singapore
95
Download from Www.Somanuals.com. All Manuals Search And Download.
C
D
Index
DATA CD 10
CD 10
“Change” 45
“Digital Out” 76
Digital video camera 66
Words in quotations appear
in the on-screen displays.
“Change Angle” 49
“Change Order” 64
CHAPTER MARK 62
CHAPTER MARK
ERASE 62
Chapter number 31
“Chapter Search” 54
Chasing Playback 53
Checking/changing/
canceling timer settings
(Timer List) 44
Numerics
“48kHz/96kHz PCM” 77
“Divide Title” 65
Dolby Digital 77
“Downmix” 77
DTS 77
A
“DV / D8 Audio Input” 67
“DV / D8 EDIT” 69
DV IN 66
“A-B Erase” 61
AC Power Cord 19
Adjusting
DV/Digital8 Dubbing 66
One Touch Dubbing
playback picture 52
playback sound 53
recording picture 42
“AFT” 72
Album number 31
“Album Search” 54
Angle 49
Child Lock 50
“Clock” 72
Clock 23
Program Edit 68
“DVD” 79
“Combine Titles” 64
COMPONENT VIDEO
OUT 16
“DVD Menu” 80
“DVD Rec. Picture Size”
DVD VIDEO 10
Antenna 12
Area code 95
AUDIO 51
Connecting
the antenna cable 12
the audio cords 18
the video cords 16
Controlling TVs with the
remote 20
Copy control signals 40
Copy-Free 40
Copy-Never 40
Copy-Once 40
CPRM 9
“Create a Playlist” 62
Creating chapters 62
“Audio ATT” 76
Audio cord 18
“Audio DRC” 77
“Audio Settings” 53
“Auto” 72
“Auto Chapter” 78
Auto Clock Set 72
“Auto Display” 75
“Auto Preset” 71
“Auto Stereo” 76
“AV SYNC” 53
E
DV/D8 Edit 66
Enter characters 33
Erase all titles 61
“Erase Titles” 60
“Extend Rec Time” 41
B
“Basic” 71
Batteries 20
“BNR” 52
96
Download from Www.Somanuals.com. All Manuals Search And Download.
F
M
P
“Factory Setup” 81
“File Search” 54
“Finalize” 36
Main sound 51
“Make a Playlist” 64
“Manual Channel Setup”
Parts and controls 92
“Pause Mode” 75
“PB Video Equalizer” 52
PBC 49
“Finalize Disc” 80
Finalizing 35
“FNR” 52
Manual Clock Set 73
MENU 49
“Format” 37
Menu
“Format DVD-RW” 80
Formatting 37
Freeze Frame 51
Front panel 93
DVD’s Menu 49
Top menu 49
“Mix” 67
Picture size 42
Play mode 31
Playable discs 10
fast forward 51
“MNR” 52
“Modify” 44
MP3 audio tracks 55
fast reverse 51
freeze frame 51
G
GB 38
instant advance 51
instant replay 51
JPEG image files 55
MP3 audio tracks 55
resume play 50
N
Number buttons 34
H
Handling discs 89
O
slow-motion play 51
Playing status bar 31
“Power Save Standby” 81
Program Edit 68
“Progressive Mode” 75
“Progressive Output” 74
“Protect Disc” 35
“Protect Title” 60
Protection
I
“Others” 81
i.LINK 90
J
JPEG image files 55
L
Labeling 34
“Language” 80
LINE 1 IN 24
LINE 2 IN 25
“Line Input” 75
“Line1 Input” 75
disc 35
title 60
,continued
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Q
S
T
Quick guide to disc types 8
Quick Timer 42
S VIDEO 16
Thumbnail picture 30
“Time Search” 54
TIME/TEXT 31
TIMER 40
SAP (Second Audio
Program) 40
Scene List 63
“Screen Saver” 75
“Search” 54
R
Timer List 44
Timer recording 40
check/change/cancel
Rear panel 94
REC 27
“Rec Mode” 42
“Rec NR” 43
“Rec Settings” 42
“Rec Video Equalizer” 43
Recordable discs 8
“Recording” 78
Recording 39
Searching
fast reverse/fast
forward 51
locatingthebeginning
of the title/
“Rec Mode Adjust”
Synchro Rec 47
“Timer Settings” 78
Title 31
TITLE LIST 49
Sort 29
Thumbnail 30
“Title Name” 60
Title number 31
“Title Search” 54
TOP MENU 49
“Track Search” 54
Troubleshooting 83
“Tuner Audio” 76
“Tuner Preset” 71
Tuner Preset 23
chapter/track 51
search mode 54
“Set Thumbnail” 60
“Sharpness” 52
SimultaneousRecandPlay
Slow-motion play 51
Sort 29
Stereo 40
Stereo programs 40
“Stereo1” 67
“Stereo2” 67
Sub sound 51
SUBTITLE 51
“Subtitle” 80
Super VIDEO CD 10
Synchro Rec 47
picture adjustment 42
recording format 8
while watching
another program
Recording time 39
Region code 11
Remaining time 31
Resetting the recorder 82
Resume Play 50
U
“Unfinalize” 37
Unfinalizing 37
V
“Video” 74
VIDEO CD 10
Video cord 16
Video input 16
Video mode 8
“Video Output” 74
“Video Settings” 52
VR mode 8
Y
“Y/Pb/PrOutBlackLevel”
98
Download from Www.Somanuals.com. All Manuals Search And Download.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed on 100% recycled paper using
VOC (Volatile Organic Compound)-free
vegetable oil based ink.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|